Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge
[deliverable/linux.git] / drivers / net / wireless / ath / ath9k / ar9003_eeprom.h
1 /*
2 * Copyright (c) 2010-2011 Atheros Communications Inc.
3 *
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
7 *
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15 */
16
17 #ifndef AR9003_EEPROM_H
18 #define AR9003_EEPROM_H
19
20 #include <linux/types.h>
21
22 #define AR9300_EEP_VER 0xD000
23 #define AR9300_EEP_VER_MINOR_MASK 0xFFF
24 #define AR9300_EEP_MINOR_VER_1 0x1
25 #define AR9300_EEP_MINOR_VER AR9300_EEP_MINOR_VER_1
26
27 /* 16-bit offset location start of calibration struct */
28 #define AR9300_EEP_START_LOC 256
29 #define AR9300_NUM_5G_CAL_PIERS 8
30 #define AR9300_NUM_2G_CAL_PIERS 3
31 #define AR9300_NUM_5G_20_TARGET_POWERS 8
32 #define AR9300_NUM_5G_40_TARGET_POWERS 8
33 #define AR9300_NUM_2G_CCK_TARGET_POWERS 2
34 #define AR9300_NUM_2G_20_TARGET_POWERS 3
35 #define AR9300_NUM_2G_40_TARGET_POWERS 3
36 /* #define AR9300_NUM_CTLS 21 */
37 #define AR9300_NUM_CTLS_5G 9
38 #define AR9300_NUM_CTLS_2G 12
39 #define AR9300_NUM_BAND_EDGES_5G 8
40 #define AR9300_NUM_BAND_EDGES_2G 4
41 #define AR9300_EEPMISC_BIG_ENDIAN 0x01
42 #define AR9300_EEPMISC_WOW 0x02
43 #define AR9300_CUSTOMER_DATA_SIZE 20
44
45 #define FBIN2FREQ(x, y) ((y) ? (2300 + x) : (4800 + 5 * x))
46 #define AR9300_MAX_CHAINS 3
47 #define AR9300_ANT_16S 25
48 #define AR9300_FUTURE_MODAL_SZ 6
49
50 #define AR9300_PAPRD_RATE_MASK 0x01ffffff
51 #define AR9300_PAPRD_SCALE_1 0x0e000000
52 #define AR9300_PAPRD_SCALE_1_S 25
53 #define AR9300_PAPRD_SCALE_2 0x70000000
54 #define AR9300_PAPRD_SCALE_2_S 28
55
56 /* Delta from which to start power to pdadc table */
57 /* This offset is used in both open loop and closed loop power control
58 * schemes. In open loop power control, it is not really needed, but for
59 * the "sake of consistency" it was kept. For certain AP designs, this
60 * value is overwritten by the value in the flag "pwrTableOffset" just
61 * before writing the pdadc vs pwr into the chip registers.
62 */
63 #define AR9300_PWR_TABLE_OFFSET 0
64
65 /* byte addressable */
66 #define AR9300_EEPROM_SIZE (16*1024)
67
68 #define AR9300_BASE_ADDR_4K 0xfff
69 #define AR9300_BASE_ADDR 0x3ff
70 #define AR9300_BASE_ADDR_512 0x1ff
71
72 #define AR9300_OTP_BASE 0x14000
73 #define AR9300_OTP_STATUS 0x15f18
74 #define AR9300_OTP_STATUS_TYPE 0x7
75 #define AR9300_OTP_STATUS_VALID 0x4
76 #define AR9300_OTP_STATUS_ACCESS_BUSY 0x2
77 #define AR9300_OTP_STATUS_SM_BUSY 0x1
78 #define AR9300_OTP_READ_DATA 0x15f1c
79
80 enum targetPowerHTRates {
81 HT_TARGET_RATE_0_8_16,
82 HT_TARGET_RATE_1_3_9_11_17_19,
83 HT_TARGET_RATE_4,
84 HT_TARGET_RATE_5,
85 HT_TARGET_RATE_6,
86 HT_TARGET_RATE_7,
87 HT_TARGET_RATE_12,
88 HT_TARGET_RATE_13,
89 HT_TARGET_RATE_14,
90 HT_TARGET_RATE_15,
91 HT_TARGET_RATE_20,
92 HT_TARGET_RATE_21,
93 HT_TARGET_RATE_22,
94 HT_TARGET_RATE_23
95 };
96
97 enum targetPowerLegacyRates {
98 LEGACY_TARGET_RATE_6_24,
99 LEGACY_TARGET_RATE_36,
100 LEGACY_TARGET_RATE_48,
101 LEGACY_TARGET_RATE_54
102 };
103
104 enum targetPowerCckRates {
105 LEGACY_TARGET_RATE_1L_5L,
106 LEGACY_TARGET_RATE_5S,
107 LEGACY_TARGET_RATE_11L,
108 LEGACY_TARGET_RATE_11S
109 };
110
111 enum ar9300_Rates {
112 ALL_TARGET_LEGACY_6_24,
113 ALL_TARGET_LEGACY_36,
114 ALL_TARGET_LEGACY_48,
115 ALL_TARGET_LEGACY_54,
116 ALL_TARGET_LEGACY_1L_5L,
117 ALL_TARGET_LEGACY_5S,
118 ALL_TARGET_LEGACY_11L,
119 ALL_TARGET_LEGACY_11S,
120 ALL_TARGET_HT20_0_8_16,
121 ALL_TARGET_HT20_1_3_9_11_17_19,
122 ALL_TARGET_HT20_4,
123 ALL_TARGET_HT20_5,
124 ALL_TARGET_HT20_6,
125 ALL_TARGET_HT20_7,
126 ALL_TARGET_HT20_12,
127 ALL_TARGET_HT20_13,
128 ALL_TARGET_HT20_14,
129 ALL_TARGET_HT20_15,
130 ALL_TARGET_HT20_20,
131 ALL_TARGET_HT20_21,
132 ALL_TARGET_HT20_22,
133 ALL_TARGET_HT20_23,
134 ALL_TARGET_HT40_0_8_16,
135 ALL_TARGET_HT40_1_3_9_11_17_19,
136 ALL_TARGET_HT40_4,
137 ALL_TARGET_HT40_5,
138 ALL_TARGET_HT40_6,
139 ALL_TARGET_HT40_7,
140 ALL_TARGET_HT40_12,
141 ALL_TARGET_HT40_13,
142 ALL_TARGET_HT40_14,
143 ALL_TARGET_HT40_15,
144 ALL_TARGET_HT40_20,
145 ALL_TARGET_HT40_21,
146 ALL_TARGET_HT40_22,
147 ALL_TARGET_HT40_23,
148 ar9300RateSize,
149 };
150
151
152 struct eepFlags {
153 u8 opFlags;
154 u8 eepMisc;
155 } __packed;
156
157 enum CompressAlgorithm {
158 _CompressNone = 0,
159 _CompressLzma,
160 _CompressPairs,
161 _CompressBlock,
162 _Compress4,
163 _Compress5,
164 _Compress6,
165 _Compress7,
166 };
167
168 struct ar9300_base_eep_hdr {
169 __le16 regDmn[2];
170 /* 4 bits tx and 4 bits rx */
171 u8 txrxMask;
172 struct eepFlags opCapFlags;
173 u8 rfSilent;
174 u8 blueToothOptions;
175 u8 deviceCap;
176 /* takes lower byte in eeprom location */
177 u8 deviceType;
178 /* offset in dB to be added to beginning
179 * of pdadc table in calibration
180 */
181 int8_t pwrTableOffset;
182 u8 params_for_tuning_caps[2];
183 /*
184 * bit0 - enable tx temp comp
185 * bit1 - enable tx volt comp
186 * bit2 - enable fastClock - default to 1
187 * bit3 - enable doubling - default to 1
188 * bit4 - enable internal regulator - default to 1
189 */
190 u8 featureEnable;
191 /* misc flags: bit0 - turn down drivestrength */
192 u8 miscConfiguration;
193 u8 eepromWriteEnableGpio;
194 u8 wlanDisableGpio;
195 u8 wlanLedGpio;
196 u8 rxBandSelectGpio;
197 u8 txrxgain;
198 /* SW controlled internal regulator fields */
199 __le32 swreg;
200 } __packed;
201
202 struct ar9300_modal_eep_header {
203 /* 4 idle, t1, t2, b (4 bits per setting) */
204 __le32 antCtrlCommon;
205 /* 4 ra1l1, ra2l1, ra1l2, ra2l2, ra12 */
206 __le32 antCtrlCommon2;
207 /* 6 idle, t, r, rx1, rx12, b (2 bits each) */
208 __le16 antCtrlChain[AR9300_MAX_CHAINS];
209 /* 3 xatten1_db for AR9280 (0xa20c/b20c 5:0) */
210 u8 xatten1DB[AR9300_MAX_CHAINS];
211 /* 3 xatten1_margin for merlin (0xa20c/b20c 16:12 */
212 u8 xatten1Margin[AR9300_MAX_CHAINS];
213 int8_t tempSlope;
214 int8_t voltSlope;
215 /* spur channels in usual fbin coding format */
216 u8 spurChans[AR_EEPROM_MODAL_SPURS];
217 /* 3 Check if the register is per chain */
218 int8_t noiseFloorThreshCh[AR9300_MAX_CHAINS];
219 u8 reserved[11];
220 int8_t quick_drop;
221 u8 xpaBiasLvl;
222 u8 txFrameToDataStart;
223 u8 txFrameToPaOn;
224 u8 txClip;
225 int8_t antennaGain;
226 u8 switchSettling;
227 int8_t adcDesiredSize;
228 u8 txEndToXpaOff;
229 u8 txEndToRxOn;
230 u8 txFrameToXpaOn;
231 u8 thresh62;
232 __le32 papdRateMaskHt20;
233 __le32 papdRateMaskHt40;
234 __le16 switchcomspdt;
235 u8 futureModal[8];
236 } __packed;
237
238 struct ar9300_cal_data_per_freq_op_loop {
239 int8_t refPower;
240 /* pdadc voltage at power measurement */
241 u8 voltMeas;
242 /* pcdac used for power measurement */
243 u8 tempMeas;
244 /* range is -60 to -127 create a mapping equation 1db resolution */
245 int8_t rxNoisefloorCal;
246 /*range is same as noisefloor */
247 int8_t rxNoisefloorPower;
248 /* temp measured when noisefloor cal was performed */
249 u8 rxTempMeas;
250 } __packed;
251
252 struct cal_tgt_pow_legacy {
253 u8 tPow2x[4];
254 } __packed;
255
256 struct cal_tgt_pow_ht {
257 u8 tPow2x[14];
258 } __packed;
259
260 struct cal_ctl_data_2g {
261 u8 ctlEdges[AR9300_NUM_BAND_EDGES_2G];
262 } __packed;
263
264 struct cal_ctl_data_5g {
265 u8 ctlEdges[AR9300_NUM_BAND_EDGES_5G];
266 } __packed;
267
268 struct ar9300_BaseExtension_1 {
269 u8 ant_div_control;
270 u8 future[11];
271 int8_t quick_drop_low;
272 int8_t quick_drop_high;
273 } __packed;
274
275 struct ar9300_BaseExtension_2 {
276 int8_t tempSlopeLow;
277 int8_t tempSlopeHigh;
278 u8 xatten1DBLow[AR9300_MAX_CHAINS];
279 u8 xatten1MarginLow[AR9300_MAX_CHAINS];
280 u8 xatten1DBHigh[AR9300_MAX_CHAINS];
281 u8 xatten1MarginHigh[AR9300_MAX_CHAINS];
282 } __packed;
283
284 struct ar9300_eeprom {
285 u8 eepromVersion;
286 u8 templateVersion;
287 u8 macAddr[6];
288 u8 custData[AR9300_CUSTOMER_DATA_SIZE];
289
290 struct ar9300_base_eep_hdr baseEepHeader;
291
292 struct ar9300_modal_eep_header modalHeader2G;
293 struct ar9300_BaseExtension_1 base_ext1;
294 u8 calFreqPier2G[AR9300_NUM_2G_CAL_PIERS];
295 struct ar9300_cal_data_per_freq_op_loop
296 calPierData2G[AR9300_MAX_CHAINS][AR9300_NUM_2G_CAL_PIERS];
297 u8 calTarget_freqbin_Cck[AR9300_NUM_2G_CCK_TARGET_POWERS];
298 u8 calTarget_freqbin_2G[AR9300_NUM_2G_20_TARGET_POWERS];
299 u8 calTarget_freqbin_2GHT20[AR9300_NUM_2G_20_TARGET_POWERS];
300 u8 calTarget_freqbin_2GHT40[AR9300_NUM_2G_40_TARGET_POWERS];
301 struct cal_tgt_pow_legacy
302 calTargetPowerCck[AR9300_NUM_2G_CCK_TARGET_POWERS];
303 struct cal_tgt_pow_legacy
304 calTargetPower2G[AR9300_NUM_2G_20_TARGET_POWERS];
305 struct cal_tgt_pow_ht
306 calTargetPower2GHT20[AR9300_NUM_2G_20_TARGET_POWERS];
307 struct cal_tgt_pow_ht
308 calTargetPower2GHT40[AR9300_NUM_2G_40_TARGET_POWERS];
309 u8 ctlIndex_2G[AR9300_NUM_CTLS_2G];
310 u8 ctl_freqbin_2G[AR9300_NUM_CTLS_2G][AR9300_NUM_BAND_EDGES_2G];
311 struct cal_ctl_data_2g ctlPowerData_2G[AR9300_NUM_CTLS_2G];
312 struct ar9300_modal_eep_header modalHeader5G;
313 struct ar9300_BaseExtension_2 base_ext2;
314 u8 calFreqPier5G[AR9300_NUM_5G_CAL_PIERS];
315 struct ar9300_cal_data_per_freq_op_loop
316 calPierData5G[AR9300_MAX_CHAINS][AR9300_NUM_5G_CAL_PIERS];
317 u8 calTarget_freqbin_5G[AR9300_NUM_5G_20_TARGET_POWERS];
318 u8 calTarget_freqbin_5GHT20[AR9300_NUM_5G_20_TARGET_POWERS];
319 u8 calTarget_freqbin_5GHT40[AR9300_NUM_5G_40_TARGET_POWERS];
320 struct cal_tgt_pow_legacy
321 calTargetPower5G[AR9300_NUM_5G_20_TARGET_POWERS];
322 struct cal_tgt_pow_ht
323 calTargetPower5GHT20[AR9300_NUM_5G_20_TARGET_POWERS];
324 struct cal_tgt_pow_ht
325 calTargetPower5GHT40[AR9300_NUM_5G_40_TARGET_POWERS];
326 u8 ctlIndex_5G[AR9300_NUM_CTLS_5G];
327 u8 ctl_freqbin_5G[AR9300_NUM_CTLS_5G][AR9300_NUM_BAND_EDGES_5G];
328 struct cal_ctl_data_5g ctlPowerData_5G[AR9300_NUM_CTLS_5G];
329 } __packed;
330
331 s32 ar9003_hw_get_tx_gain_idx(struct ath_hw *ah);
332 s32 ar9003_hw_get_rx_gain_idx(struct ath_hw *ah);
333
334 u8 *ar9003_get_spur_chan_ptr(struct ath_hw *ah, bool is_2ghz);
335
336 unsigned int ar9003_get_paprd_scale_factor(struct ath_hw *ah,
337 struct ath9k_channel *chan);
338 #endif
This page took 0.056801 seconds and 5 git commands to generate.