2 * Copyright (c) 2012 Qualcomm Atheros, Inc.
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
17 #include <linux/etherdevice.h>
18 #include <linux/if_arp.h>
26 * WMI event receiving - theory of operations
28 * When firmware about to report WMI event, it fills memory area
29 * in the mailbox and raises misc. IRQ. Thread interrupt handler invoked for
30 * the misc IRQ, function @wmi_recv_cmd called by thread IRQ handler.
32 * @wmi_recv_cmd reads event, allocates memory chunk and attaches it to the
33 * event list @wil->pending_wmi_ev. Then, work queue @wil->wmi_wq wakes up
34 * and handles events within the @wmi_event_worker. Every event get detached
35 * from list, processed and deleted.
37 * Purpose for this mechanism is to release IRQ thread; otherwise,
38 * if WMI event handling involves another WMI command flow, this 2-nd flow
39 * won't be completed because of blocked IRQ thread.
43 * Addressing - theory of operations
45 * There are several buses present on the WIL6210 card.
46 * Same memory areas are visible at different address on
47 * the different busses. There are 3 main bus masters:
49 * - User CPU (firmware)
52 * On the PCI bus, there is one BAR (BAR0) of 2Mb size, exposing
53 * AHB addresses starting from 0x880000
55 * Internally, firmware uses addresses that allows faster access but
56 * are invisible from the host. To read from these addresses, alternative
57 * AHB address must be used.
60 * Linker address PCI/Host address
61 * 0x880000 .. 0xa80000 2Mb BAR0
62 * 0x800000 .. 0x807000 0x900000 .. 0x907000 28k DCCM
63 * 0x840000 .. 0x857000 0x908000 .. 0x91f000 92k PERIPH
67 * @fw_mapping provides memory remapping table
69 * array size should be in sync with the declaration in the wil6210.h
71 const struct fw_map fw_mapping
[] = {
72 {0x000000, 0x040000, 0x8c0000, "fw_code"}, /* FW code RAM 256k */
73 {0x800000, 0x808000, 0x900000, "fw_data"}, /* FW data RAM 32k */
74 {0x840000, 0x860000, 0x908000, "fw_peri"}, /* periph. data RAM 128k */
75 {0x880000, 0x88a000, 0x880000, "rgf"}, /* various RGF 40k */
76 {0x88a000, 0x88b000, 0x88a000, "AGC_tbl"}, /* AGC table 4k */
77 {0x88b000, 0x88c000, 0x88b000, "rgf_ext"}, /* Pcie_ext_rgf 4k */
78 {0x8c0000, 0x949000, 0x8c0000, "upper"}, /* upper area 548k */
80 * 920000..930000 ucode code RAM
81 * 930000..932000 ucode data RAM
82 * 932000..949000 back-door debug data
87 * return AHB address for given firmware/ucode internal (linker) address
88 * @x - internal address
89 * If address have no valid AHB mapping, return 0
91 static u32
wmi_addr_remap(u32 x
)
95 for (i
= 0; i
< ARRAY_SIZE(fw_mapping
); i
++) {
96 if ((x
>= fw_mapping
[i
].from
) && (x
< fw_mapping
[i
].to
))
97 return x
+ fw_mapping
[i
].host
- fw_mapping
[i
].from
;
104 * Check address validity for WMI buffer; remap if needed
105 * @ptr - internal (linker) fw/ucode address
107 * Valid buffer should be DWORD aligned
109 * return address for accessing buffer from the host;
110 * if buffer is not valid, return NULL.
112 void __iomem
*wmi_buffer(struct wil6210_priv
*wil
, __le32 ptr_
)
115 u32 ptr
= le32_to_cpu(ptr_
);
120 ptr
= wmi_addr_remap(ptr
);
121 if (ptr
< WIL6210_FW_HOST_OFF
)
125 if (off
> WIL6210_MEM_SIZE
- 4)
128 return wil
->csr
+ off
;
132 * Check address validity
134 void __iomem
*wmi_addr(struct wil6210_priv
*wil
, u32 ptr
)
141 if (ptr
< WIL6210_FW_HOST_OFF
)
145 if (off
> WIL6210_MEM_SIZE
- 4)
148 return wil
->csr
+ off
;
151 int wmi_read_hdr(struct wil6210_priv
*wil
, __le32 ptr
,
152 struct wil6210_mbox_hdr
*hdr
)
154 void __iomem
*src
= wmi_buffer(wil
, ptr
);
158 wil_memcpy_fromio_32(hdr
, src
, sizeof(*hdr
));
163 static int __wmi_send(struct wil6210_priv
*wil
, u16 cmdid
, void *buf
, u16 len
)
166 struct wil6210_mbox_hdr hdr
;
167 struct wil6210_mbox_hdr_wmi wmi
;
170 .type
= WIL_MBOX_HDR_TYPE_WMI
,
172 .len
= cpu_to_le16(sizeof(cmd
.wmi
) + len
),
176 .id
= cpu_to_le16(cmdid
),
179 struct wil6210_mbox_ring
*r
= &wil
->mbox_ctl
.tx
;
180 struct wil6210_mbox_ring_desc d_head
;
183 void __iomem
*head
= wmi_addr(wil
, r
->head
);
186 if (sizeof(cmd
) + len
> r
->entry_size
) {
187 wil_err(wil
, "WMI size too large: %d bytes, max is %d\n",
188 (int)(sizeof(cmd
) + len
), r
->entry_size
);
194 if (!test_bit(wil_status_fwready
, &wil
->status
)) {
195 wil_err(wil
, "WMI: cannot send command while FW not ready\n");
200 wil_err(wil
, "WMI head is garbage: 0x%08x\n", r
->head
);
203 /* read Tx head till it is not busy */
204 for (retry
= 5; retry
> 0; retry
--) {
205 wil_memcpy_fromio_32(&d_head
, head
, sizeof(d_head
));
206 if (d_head
.sync
== 0)
210 if (d_head
.sync
!= 0) {
211 wil_err(wil
, "WMI head busy\n");
215 next_head
= r
->base
+ ((r
->head
- r
->base
+ sizeof(d_head
)) % r
->size
);
216 wil_dbg_wmi(wil
, "Head 0x%08x -> 0x%08x\n", r
->head
, next_head
);
217 /* wait till FW finish with previous command */
218 for (retry
= 5; retry
> 0; retry
--) {
219 r
->tail
= ioread32(wil
->csr
+ HOST_MBOX
+
220 offsetof(struct wil6210_mbox_ctl
, tx
.tail
));
221 if (next_head
!= r
->tail
)
225 if (next_head
== r
->tail
) {
226 wil_err(wil
, "WMI ring full\n");
229 dst
= wmi_buffer(wil
, d_head
.addr
);
231 wil_err(wil
, "invalid WMI buffer: 0x%08x\n",
232 le32_to_cpu(d_head
.addr
));
235 cmd
.hdr
.seq
= cpu_to_le16(++wil
->wmi_seq
);
237 wil_dbg_wmi(wil
, "WMI command 0x%04x [%d]\n", cmdid
, len
);
238 wil_hex_dump_wmi("Cmd ", DUMP_PREFIX_OFFSET
, 16, 1, &cmd
,
240 wil_hex_dump_wmi("cmd ", DUMP_PREFIX_OFFSET
, 16, 1, buf
,
242 wil_memcpy_toio_32(dst
, &cmd
, sizeof(cmd
));
243 wil_memcpy_toio_32(dst
+ sizeof(cmd
), buf
, len
);
244 /* mark entry as full */
245 iowrite32(1, wil
->csr
+ HOSTADDR(r
->head
) +
246 offsetof(struct wil6210_mbox_ring_desc
, sync
));
247 /* advance next ptr */
248 iowrite32(r
->head
= next_head
, wil
->csr
+ HOST_MBOX
+
249 offsetof(struct wil6210_mbox_ctl
, tx
.head
));
251 trace_wil6210_wmi_cmd(&cmd
.wmi
, buf
, len
);
253 /* interrupt to FW */
254 iowrite32(SW_INT_MBOX
, wil
->csr
+ HOST_SW_INT
);
259 int wmi_send(struct wil6210_priv
*wil
, u16 cmdid
, void *buf
, u16 len
)
263 mutex_lock(&wil
->wmi_mutex
);
264 rc
= __wmi_send(wil
, cmdid
, buf
, len
);
265 mutex_unlock(&wil
->wmi_mutex
);
270 /*=== Event handlers ===*/
271 static void wmi_evt_ready(struct wil6210_priv
*wil
, int id
, void *d
, int len
)
273 struct net_device
*ndev
= wil_to_ndev(wil
);
274 struct wireless_dev
*wdev
= wil
->wdev
;
275 struct wmi_ready_event
*evt
= d
;
276 wil
->fw_version
= le32_to_cpu(evt
->sw_version
);
277 wil
->n_mids
= evt
->numof_additional_mids
;
279 wil_info(wil
, "FW ver. %d; MAC %pM; %d MID's\n", wil
->fw_version
,
280 evt
->mac
, wil
->n_mids
);
282 if (!is_valid_ether_addr(ndev
->dev_addr
)) {
283 memcpy(ndev
->dev_addr
, evt
->mac
, ETH_ALEN
);
284 memcpy(ndev
->perm_addr
, evt
->mac
, ETH_ALEN
);
286 snprintf(wdev
->wiphy
->fw_version
, sizeof(wdev
->wiphy
->fw_version
),
287 "%d", wil
->fw_version
);
290 static void wmi_evt_fw_ready(struct wil6210_priv
*wil
, int id
, void *d
,
293 wil_dbg_wmi(wil
, "WMI: got FW ready event\n");
295 set_bit(wil_status_fwready
, &wil
->status
);
296 /* reuse wmi_ready for the firmware ready indication */
297 complete(&wil
->wmi_ready
);
300 static void wmi_evt_rx_mgmt(struct wil6210_priv
*wil
, int id
, void *d
, int len
)
302 struct wmi_rx_mgmt_packet_event
*data
= d
;
303 struct wiphy
*wiphy
= wil_to_wiphy(wil
);
304 struct ieee80211_mgmt
*rx_mgmt_frame
=
305 (struct ieee80211_mgmt
*)data
->payload
;
306 int ch_no
= data
->info
.channel
+1;
307 u32 freq
= ieee80211_channel_to_frequency(ch_no
,
308 IEEE80211_BAND_60GHZ
);
309 struct ieee80211_channel
*channel
= ieee80211_get_channel(wiphy
, freq
);
310 s32 signal
= data
->info
.sqi
;
311 __le16 fc
= rx_mgmt_frame
->frame_control
;
312 u32 d_len
= le32_to_cpu(data
->info
.len
);
313 u16 d_status
= le16_to_cpu(data
->info
.status
);
315 wil_dbg_wmi(wil
, "MGMT: channel %d MCS %d SNR %d SQI %d%%\n",
316 data
->info
.channel
, data
->info
.mcs
, data
->info
.snr
,
318 wil_dbg_wmi(wil
, "status 0x%04x len %d fc 0x%04x\n", d_status
, d_len
,
320 wil_dbg_wmi(wil
, "qid %d mid %d cid %d\n",
321 data
->info
.qid
, data
->info
.mid
, data
->info
.cid
);
324 wil_err(wil
, "Frame on unsupported channel\n");
328 if (ieee80211_is_beacon(fc
) || ieee80211_is_probe_resp(fc
)) {
329 struct cfg80211_bss
*bss
;
330 u64 tsf
= le64_to_cpu(rx_mgmt_frame
->u
.beacon
.timestamp
);
331 u16 cap
= le16_to_cpu(rx_mgmt_frame
->u
.beacon
.capab_info
);
332 u16 bi
= le16_to_cpu(rx_mgmt_frame
->u
.beacon
.beacon_int
);
333 const u8
*ie_buf
= rx_mgmt_frame
->u
.beacon
.variable
;
334 size_t ie_len
= d_len
- offsetof(struct ieee80211_mgmt
,
336 wil_dbg_wmi(wil
, "Capability info : 0x%04x\n", cap
);
337 wil_dbg_wmi(wil
, "TSF : 0x%016llx\n", tsf
);
338 wil_dbg_wmi(wil
, "Beacon interval : %d\n", bi
);
339 wil_hex_dump_wmi("IE ", DUMP_PREFIX_OFFSET
, 16, 1, ie_buf
,
342 bss
= cfg80211_inform_bss_frame(wiphy
, channel
, rx_mgmt_frame
,
343 d_len
, signal
, GFP_KERNEL
);
345 wil_dbg_wmi(wil
, "Added BSS %pM\n",
346 rx_mgmt_frame
->bssid
);
347 cfg80211_put_bss(wiphy
, bss
);
349 wil_err(wil
, "cfg80211_inform_bss() failed\n");
352 cfg80211_rx_mgmt(wil
->wdev
, freq
, signal
,
353 (void *)rx_mgmt_frame
, d_len
, 0, GFP_KERNEL
);
357 static void wmi_evt_scan_complete(struct wil6210_priv
*wil
, int id
,
360 if (wil
->scan_request
) {
361 struct wmi_scan_complete_event
*data
= d
;
362 bool aborted
= (data
->status
!= WMI_SCAN_SUCCESS
);
364 wil_dbg_wmi(wil
, "SCAN_COMPLETE(0x%08x)\n", data
->status
);
365 wil_dbg_misc(wil
, "Complete scan_request 0x%p aborted %d\n",
366 wil
->scan_request
, aborted
);
368 del_timer_sync(&wil
->scan_timer
);
369 cfg80211_scan_done(wil
->scan_request
, aborted
);
370 wil
->scan_request
= NULL
;
372 wil_err(wil
, "SCAN_COMPLETE while not scanning\n");
376 static void wmi_evt_connect(struct wil6210_priv
*wil
, int id
, void *d
, int len
)
378 struct net_device
*ndev
= wil_to_ndev(wil
);
379 struct wireless_dev
*wdev
= wil
->wdev
;
380 struct wmi_connect_event
*evt
= d
;
381 int ch
; /* channel number */
382 struct station_info sinfo
;
383 u8
*assoc_req_ie
, *assoc_resp_ie
;
384 size_t assoc_req_ielen
, assoc_resp_ielen
;
385 /* capinfo(u16) + listen_interval(u16) + IEs */
386 const size_t assoc_req_ie_offset
= sizeof(u16
) * 2;
387 /* capinfo(u16) + status_code(u16) + associd(u16) + IEs */
388 const size_t assoc_resp_ie_offset
= sizeof(u16
) * 3;
390 if (len
< sizeof(*evt
)) {
391 wil_err(wil
, "Connect event too short : %d bytes\n", len
);
394 if (len
!= sizeof(*evt
) + evt
->beacon_ie_len
+ evt
->assoc_req_len
+
395 evt
->assoc_resp_len
) {
397 "Connect event corrupted : %d != %d + %d + %d + %d\n",
398 len
, (int)sizeof(*evt
), evt
->beacon_ie_len
,
399 evt
->assoc_req_len
, evt
->assoc_resp_len
);
402 if (evt
->cid
>= WIL6210_MAX_CID
) {
403 wil_err(wil
, "Connect CID invalid : %d\n", evt
->cid
);
407 ch
= evt
->channel
+ 1;
408 wil_dbg_wmi(wil
, "Connect %pM channel [%d] cid %d\n",
409 evt
->bssid
, ch
, evt
->cid
);
410 wil_hex_dump_wmi("connect AI : ", DUMP_PREFIX_OFFSET
, 16, 1,
411 evt
->assoc_info
, len
- sizeof(*evt
), true);
413 /* figure out IE's */
414 assoc_req_ie
= &evt
->assoc_info
[evt
->beacon_ie_len
+
415 assoc_req_ie_offset
];
416 assoc_req_ielen
= evt
->assoc_req_len
- assoc_req_ie_offset
;
417 if (evt
->assoc_req_len
<= assoc_req_ie_offset
) {
422 assoc_resp_ie
= &evt
->assoc_info
[evt
->beacon_ie_len
+
424 assoc_resp_ie_offset
];
425 assoc_resp_ielen
= evt
->assoc_resp_len
- assoc_resp_ie_offset
;
426 if (evt
->assoc_resp_len
<= assoc_resp_ie_offset
) {
427 assoc_resp_ie
= NULL
;
428 assoc_resp_ielen
= 0;
431 if ((wdev
->iftype
== NL80211_IFTYPE_STATION
) ||
432 (wdev
->iftype
== NL80211_IFTYPE_P2P_CLIENT
)) {
433 if (!test_bit(wil_status_fwconnecting
, &wil
->status
)) {
434 wil_err(wil
, "Not in connecting state\n");
437 del_timer_sync(&wil
->connect_timer
);
438 cfg80211_connect_result(ndev
, evt
->bssid
,
439 assoc_req_ie
, assoc_req_ielen
,
440 assoc_resp_ie
, assoc_resp_ielen
,
441 WLAN_STATUS_SUCCESS
, GFP_KERNEL
);
443 } else if ((wdev
->iftype
== NL80211_IFTYPE_AP
) ||
444 (wdev
->iftype
== NL80211_IFTYPE_P2P_GO
)) {
445 memset(&sinfo
, 0, sizeof(sinfo
));
447 sinfo
.generation
= wil
->sinfo_gen
++;
450 sinfo
.assoc_req_ies
= assoc_req_ie
;
451 sinfo
.assoc_req_ies_len
= assoc_req_ielen
;
452 sinfo
.filled
|= STATION_INFO_ASSOC_REQ_IES
;
455 cfg80211_new_sta(ndev
, evt
->bssid
, &sinfo
, GFP_KERNEL
);
457 clear_bit(wil_status_fwconnecting
, &wil
->status
);
458 set_bit(wil_status_fwconnected
, &wil
->status
);
460 /* FIXME FW can transmit only ucast frames to peer */
461 /* FIXME real ring_id instead of hard coded 0 */
462 memcpy(wil
->sta
[evt
->cid
].addr
, evt
->bssid
, ETH_ALEN
);
463 wil
->sta
[evt
->cid
].status
= wil_sta_conn_pending
;
465 wil
->pending_connect_cid
= evt
->cid
;
466 queue_work(wil
->wmi_wq_conn
, &wil
->connect_worker
);
469 static void wmi_evt_disconnect(struct wil6210_priv
*wil
, int id
,
472 struct wmi_disconnect_event
*evt
= d
;
474 wil_dbg_wmi(wil
, "Disconnect %pM reason %d proto %d wmi\n",
476 evt
->protocol_reason_status
, evt
->disconnect_reason
);
480 mutex_lock(&wil
->mutex
);
481 wil6210_disconnect(wil
, evt
->bssid
);
482 mutex_unlock(&wil
->mutex
);
485 static void wmi_evt_notify(struct wil6210_priv
*wil
, int id
, void *d
, int len
)
487 struct wmi_notify_req_done_event
*evt
= d
;
489 if (len
< sizeof(*evt
)) {
490 wil_err(wil
, "Short NOTIFY event\n");
494 wil
->stats
.tsf
= le64_to_cpu(evt
->tsf
);
495 wil
->stats
.snr
= le32_to_cpu(evt
->snr_val
);
496 wil
->stats
.bf_mcs
= le16_to_cpu(evt
->bf_mcs
);
497 wil
->stats
.my_rx_sector
= le16_to_cpu(evt
->my_rx_sector
);
498 wil
->stats
.my_tx_sector
= le16_to_cpu(evt
->my_tx_sector
);
499 wil
->stats
.peer_rx_sector
= le16_to_cpu(evt
->other_rx_sector
);
500 wil
->stats
.peer_tx_sector
= le16_to_cpu(evt
->other_tx_sector
);
501 wil_dbg_wmi(wil
, "Link status, MCS %d TSF 0x%016llx\n"
502 "BF status 0x%08x SNR 0x%08x SQI %d%%\n"
503 "Tx Tpt %d goodput %d Rx goodput %d\n"
504 "Sectors(rx:tx) my %d:%d peer %d:%d\n",
505 wil
->stats
.bf_mcs
, wil
->stats
.tsf
, evt
->status
,
506 wil
->stats
.snr
, evt
->sqi
, le32_to_cpu(evt
->tx_tpt
),
507 le32_to_cpu(evt
->tx_goodput
), le32_to_cpu(evt
->rx_goodput
),
508 wil
->stats
.my_rx_sector
, wil
->stats
.my_tx_sector
,
509 wil
->stats
.peer_rx_sector
, wil
->stats
.peer_tx_sector
);
513 * Firmware reports EAPOL frame using WME event.
514 * Reconstruct Ethernet frame and deliver it via normal Rx
516 static void wmi_evt_eapol_rx(struct wil6210_priv
*wil
, int id
,
519 struct net_device
*ndev
= wil_to_ndev(wil
);
520 struct wmi_eapol_rx_event
*evt
= d
;
521 u16 eapol_len
= le16_to_cpu(evt
->eapol_len
);
522 int sz
= eapol_len
+ ETH_HLEN
;
526 struct wil_net_stats
*stats
= NULL
;
528 wil_dbg_wmi(wil
, "EAPOL len %d from %pM\n", eapol_len
,
531 cid
= wil_find_cid(wil
, evt
->src_mac
);
533 stats
= &wil
->sta
[cid
].stats
;
535 if (eapol_len
> 196) { /* TODO: revisit size limit */
536 wil_err(wil
, "EAPOL too large\n");
540 skb
= alloc_skb(sz
, GFP_KERNEL
);
542 wil_err(wil
, "Failed to allocate skb\n");
546 eth
= (struct ethhdr
*)skb_put(skb
, ETH_HLEN
);
547 memcpy(eth
->h_dest
, ndev
->dev_addr
, ETH_ALEN
);
548 memcpy(eth
->h_source
, evt
->src_mac
, ETH_ALEN
);
549 eth
->h_proto
= cpu_to_be16(ETH_P_PAE
);
550 memcpy(skb_put(skb
, eapol_len
), evt
->eapol
, eapol_len
);
551 skb
->protocol
= eth_type_trans(skb
, ndev
);
552 if (likely(netif_rx_ni(skb
) == NET_RX_SUCCESS
)) {
553 ndev
->stats
.rx_packets
++;
554 ndev
->stats
.rx_bytes
+= sz
;
557 stats
->rx_bytes
+= sz
;
560 ndev
->stats
.rx_dropped
++;
566 static void wmi_evt_linkup(struct wil6210_priv
*wil
, int id
, void *d
, int len
)
568 struct net_device
*ndev
= wil_to_ndev(wil
);
569 struct wmi_data_port_open_event
*evt
= d
;
572 wil_dbg_wmi(wil
, "Link UP for CID %d\n", cid
);
574 if (cid
>= ARRAY_SIZE(wil
->sta
)) {
575 wil_err(wil
, "Link UP for invalid CID %d\n", cid
);
579 wil
->sta
[cid
].data_port_open
= true;
580 netif_carrier_on(ndev
);
583 static void wmi_evt_linkdown(struct wil6210_priv
*wil
, int id
, void *d
, int len
)
585 struct net_device
*ndev
= wil_to_ndev(wil
);
586 struct wmi_wbe_link_down_event
*evt
= d
;
589 wil_dbg_wmi(wil
, "Link DOWN for CID %d, reason %d\n",
590 cid
, le32_to_cpu(evt
->reason
));
592 if (cid
>= ARRAY_SIZE(wil
->sta
)) {
593 wil_err(wil
, "Link DOWN for invalid CID %d\n", cid
);
597 wil
->sta
[cid
].data_port_open
= false;
598 netif_carrier_off(ndev
);
601 static void wmi_evt_ba_status(struct wil6210_priv
*wil
, int id
, void *d
,
604 struct wmi_vring_ba_status_event
*evt
= d
;
605 struct wil_sta_info
*sta
;
608 /* TODO: use Rx BA status, not Tx one */
610 wil_dbg_wmi(wil
, "BACK[%d] %s {%d} timeout %d\n",
612 evt
->status
== WMI_BA_AGREED
? "OK" : "N/A",
613 evt
->agg_wsize
, __le16_to_cpu(evt
->ba_timeout
));
615 if (evt
->ringid
>= WIL6210_MAX_TX_RINGS
) {
616 wil_err(wil
, "invalid ring id %d\n", evt
->ringid
);
620 cid
= wil
->vring2cid_tid
[evt
->ringid
][0];
621 if (cid
>= WIL6210_MAX_CID
) {
622 wil_err(wil
, "invalid CID %d for vring %d\n", cid
, evt
->ringid
);
626 sta
= &wil
->sta
[cid
];
627 if (sta
->status
== wil_sta_unused
) {
628 wil_err(wil
, "CID %d unused\n", cid
);
632 wil_dbg_wmi(wil
, "BACK for CID %d %pM\n", cid
, sta
->addr
);
633 for (i
= 0; i
< WIL_STA_TID_NUM
; i
++) {
634 struct wil_tid_ampdu_rx
*r
= sta
->tid_rx
[i
];
635 sta
->tid_rx
[i
] = NULL
;
636 wil_tid_ampdu_rx_free(wil
, r
);
637 if ((evt
->status
== WMI_BA_AGREED
) && evt
->agg_wsize
)
638 sta
->tid_rx
[i
] = wil_tid_ampdu_rx_alloc(wil
,
643 static const struct {
645 void (*handler
)(struct wil6210_priv
*wil
, int eventid
,
646 void *data
, int data_len
);
647 } wmi_evt_handlers
[] = {
648 {WMI_READY_EVENTID
, wmi_evt_ready
},
649 {WMI_FW_READY_EVENTID
, wmi_evt_fw_ready
},
650 {WMI_RX_MGMT_PACKET_EVENTID
, wmi_evt_rx_mgmt
},
651 {WMI_SCAN_COMPLETE_EVENTID
, wmi_evt_scan_complete
},
652 {WMI_CONNECT_EVENTID
, wmi_evt_connect
},
653 {WMI_DISCONNECT_EVENTID
, wmi_evt_disconnect
},
654 {WMI_NOTIFY_REQ_DONE_EVENTID
, wmi_evt_notify
},
655 {WMI_EAPOL_RX_EVENTID
, wmi_evt_eapol_rx
},
656 {WMI_DATA_PORT_OPEN_EVENTID
, wmi_evt_linkup
},
657 {WMI_WBE_LINKDOWN_EVENTID
, wmi_evt_linkdown
},
658 {WMI_BA_STATUS_EVENTID
, wmi_evt_ba_status
},
663 * Extract WMI command from mailbox. Queue it to the @wil->pending_wmi_ev
664 * that will be eventually handled by the @wmi_event_worker in the thread
665 * context of thread "wil6210_wmi"
667 void wmi_recv_cmd(struct wil6210_priv
*wil
)
669 struct wil6210_mbox_ring_desc d_tail
;
670 struct wil6210_mbox_hdr hdr
;
671 struct wil6210_mbox_ring
*r
= &wil
->mbox_ctl
.rx
;
672 struct pending_wmi_event
*evt
;
678 if (!test_bit(wil_status_reset_done
, &wil
->status
)) {
679 wil_err(wil
, "Reset not completed\n");
687 r
->head
= ioread32(wil
->csr
+ HOST_MBOX
+
688 offsetof(struct wil6210_mbox_ctl
, rx
.head
));
689 if (r
->tail
== r
->head
)
692 wil_dbg_wmi(wil
, "Mbox head %08x tail %08x\n",
694 /* read cmd descriptor from tail */
695 wil_memcpy_fromio_32(&d_tail
, wil
->csr
+ HOSTADDR(r
->tail
),
696 sizeof(struct wil6210_mbox_ring_desc
));
697 if (d_tail
.sync
== 0) {
698 wil_err(wil
, "Mbox evt not owned by FW?\n");
702 /* read cmd header from descriptor */
703 if (0 != wmi_read_hdr(wil
, d_tail
.addr
, &hdr
)) {
704 wil_err(wil
, "Mbox evt at 0x%08x?\n",
705 le32_to_cpu(d_tail
.addr
));
708 len
= le16_to_cpu(hdr
.len
);
709 wil_dbg_wmi(wil
, "Mbox evt %04x %04x %04x %02x\n",
710 le16_to_cpu(hdr
.seq
), len
, le16_to_cpu(hdr
.type
),
713 /* read cmd buffer from descriptor */
714 src
= wmi_buffer(wil
, d_tail
.addr
) +
715 sizeof(struct wil6210_mbox_hdr
);
716 evt
= kmalloc(ALIGN(offsetof(struct pending_wmi_event
,
717 event
.wmi
) + len
, 4),
722 evt
->event
.hdr
= hdr
;
723 cmd
= (void *)&evt
->event
.wmi
;
724 wil_memcpy_fromio_32(cmd
, src
, len
);
725 /* mark entry as empty */
726 iowrite32(0, wil
->csr
+ HOSTADDR(r
->tail
) +
727 offsetof(struct wil6210_mbox_ring_desc
, sync
));
729 if ((hdr
.type
== WIL_MBOX_HDR_TYPE_WMI
) &&
730 (len
>= sizeof(struct wil6210_mbox_hdr_wmi
))) {
731 struct wil6210_mbox_hdr_wmi
*wmi
= &evt
->event
.wmi
;
732 u16 id
= le16_to_cpu(wmi
->id
);
733 u32 tstamp
= le32_to_cpu(wmi
->timestamp
);
734 wil_dbg_wmi(wil
, "WMI event 0x%04x MID %d @%d msec\n",
735 id
, wmi
->mid
, tstamp
);
736 trace_wil6210_wmi_event(wmi
, &wmi
[1],
739 wil_hex_dump_wmi("evt ", DUMP_PREFIX_OFFSET
, 16, 1,
740 &evt
->event
.hdr
, sizeof(hdr
) + len
, true);
743 r
->tail
= r
->base
+ ((r
->tail
- r
->base
+
744 sizeof(struct wil6210_mbox_ring_desc
)) % r
->size
);
745 iowrite32(r
->tail
, wil
->csr
+ HOST_MBOX
+
746 offsetof(struct wil6210_mbox_ctl
, rx
.tail
));
748 /* add to the pending list */
749 spin_lock_irqsave(&wil
->wmi_ev_lock
, flags
);
750 list_add_tail(&evt
->list
, &wil
->pending_wmi_ev
);
751 spin_unlock_irqrestore(&wil
->wmi_ev_lock
, flags
);
752 q
= queue_work(wil
->wmi_wq
, &wil
->wmi_event_worker
);
753 wil_dbg_wmi(wil
, "queue_work -> %d\n", q
);
755 /* normally, 1 event per IRQ should be processed */
756 wil_dbg_wmi(wil
, "%s -> %d events queued\n", __func__
, n
);
759 int wmi_call(struct wil6210_priv
*wil
, u16 cmdid
, void *buf
, u16 len
,
760 u16 reply_id
, void *reply
, u8 reply_size
, int to_msec
)
765 mutex_lock(&wil
->wmi_mutex
);
767 rc
= __wmi_send(wil
, cmdid
, buf
, len
);
771 wil
->reply_id
= reply_id
;
772 wil
->reply_buf
= reply
;
773 wil
->reply_size
= reply_size
;
774 remain
= wait_for_completion_timeout(&wil
->wmi_ready
,
775 msecs_to_jiffies(to_msec
));
777 wil_err(wil
, "wmi_call(0x%04x->0x%04x) timeout %d msec\n",
778 cmdid
, reply_id
, to_msec
);
782 "wmi_call(0x%04x->0x%04x) completed in %d msec\n",
784 to_msec
- jiffies_to_msecs(remain
));
787 wil
->reply_buf
= NULL
;
790 mutex_unlock(&wil
->wmi_mutex
);
795 int wmi_echo(struct wil6210_priv
*wil
)
797 struct wmi_echo_cmd cmd
= {
798 .value
= cpu_to_le32(0x12345678),
801 return wmi_call(wil
, WMI_ECHO_CMDID
, &cmd
, sizeof(cmd
),
802 WMI_ECHO_RSP_EVENTID
, NULL
, 0, 20);
805 int wmi_set_mac_address(struct wil6210_priv
*wil
, void *addr
)
807 struct wmi_set_mac_address_cmd cmd
;
809 memcpy(cmd
.mac
, addr
, ETH_ALEN
);
811 wil_dbg_wmi(wil
, "Set MAC %pM\n", addr
);
813 return wmi_send(wil
, WMI_SET_MAC_ADDRESS_CMDID
, &cmd
, sizeof(cmd
));
816 int wmi_pcp_start(struct wil6210_priv
*wil
, int bi
, u8 wmi_nettype
, u8 chan
)
820 struct wmi_pcp_start_cmd cmd
= {
821 .bcon_interval
= cpu_to_le16(bi
),
822 .network_type
= wmi_nettype
,
823 .disable_sec_offload
= 1,
825 .pcp_max_assoc_sta
= WIL6210_MAX_CID
,
828 struct wil6210_mbox_hdr_wmi wmi
;
829 struct wmi_pcp_started_event evt
;
832 if (!wil
->secure_pcp
)
836 * Processing time may be huge, in case of secure AP it takes about
837 * 3500ms for FW to start AP
839 rc
= wmi_call(wil
, WMI_PCP_START_CMDID
, &cmd
, sizeof(cmd
),
840 WMI_PCP_STARTED_EVENTID
, &reply
, sizeof(reply
), 5000);
844 if (reply
.evt
.status
!= WMI_FW_STATUS_SUCCESS
)
850 int wmi_pcp_stop(struct wil6210_priv
*wil
)
852 return wmi_call(wil
, WMI_PCP_STOP_CMDID
, NULL
, 0,
853 WMI_PCP_STOPPED_EVENTID
, NULL
, 0, 20);
856 int wmi_set_ssid(struct wil6210_priv
*wil
, u8 ssid_len
, const void *ssid
)
858 struct wmi_set_ssid_cmd cmd
= {
859 .ssid_len
= cpu_to_le32(ssid_len
),
862 if (ssid_len
> sizeof(cmd
.ssid
))
865 memcpy(cmd
.ssid
, ssid
, ssid_len
);
867 return wmi_send(wil
, WMI_SET_SSID_CMDID
, &cmd
, sizeof(cmd
));
870 int wmi_get_ssid(struct wil6210_priv
*wil
, u8
*ssid_len
, void *ssid
)
874 struct wil6210_mbox_hdr_wmi wmi
;
875 struct wmi_set_ssid_cmd cmd
;
877 int len
; /* reply.cmd.ssid_len in CPU order */
879 rc
= wmi_call(wil
, WMI_GET_SSID_CMDID
, NULL
, 0, WMI_GET_SSID_EVENTID
,
880 &reply
, sizeof(reply
), 20);
884 len
= le32_to_cpu(reply
.cmd
.ssid_len
);
885 if (len
> sizeof(reply
.cmd
.ssid
))
889 memcpy(ssid
, reply
.cmd
.ssid
, len
);
894 int wmi_set_channel(struct wil6210_priv
*wil
, int channel
)
896 struct wmi_set_pcp_channel_cmd cmd
= {
897 .channel
= channel
- 1,
900 return wmi_send(wil
, WMI_SET_PCP_CHANNEL_CMDID
, &cmd
, sizeof(cmd
));
903 int wmi_get_channel(struct wil6210_priv
*wil
, int *channel
)
907 struct wil6210_mbox_hdr_wmi wmi
;
908 struct wmi_set_pcp_channel_cmd cmd
;
911 rc
= wmi_call(wil
, WMI_GET_PCP_CHANNEL_CMDID
, NULL
, 0,
912 WMI_GET_PCP_CHANNEL_EVENTID
, &reply
, sizeof(reply
), 20);
916 if (reply
.cmd
.channel
> 3)
919 *channel
= reply
.cmd
.channel
+ 1;
924 int wmi_p2p_cfg(struct wil6210_priv
*wil
, int channel
)
926 struct wmi_p2p_cfg_cmd cmd
= {
927 .discovery_mode
= WMI_DISCOVERY_MODE_NON_OFFLOAD
,
928 .channel
= channel
- 1,
931 return wmi_send(wil
, WMI_P2P_CFG_CMDID
, &cmd
, sizeof(cmd
));
934 int wmi_del_cipher_key(struct wil6210_priv
*wil
, u8 key_index
,
935 const void *mac_addr
)
937 struct wmi_delete_cipher_key_cmd cmd
= {
938 .key_index
= key_index
,
942 memcpy(cmd
.mac
, mac_addr
, WMI_MAC_LEN
);
944 return wmi_send(wil
, WMI_DELETE_CIPHER_KEY_CMDID
, &cmd
, sizeof(cmd
));
947 int wmi_add_cipher_key(struct wil6210_priv
*wil
, u8 key_index
,
948 const void *mac_addr
, int key_len
, const void *key
)
950 struct wmi_add_cipher_key_cmd cmd
= {
951 .key_index
= key_index
,
952 .key_usage
= WMI_KEY_USE_PAIRWISE
,
956 if (!key
|| (key_len
> sizeof(cmd
.key
)))
959 memcpy(cmd
.key
, key
, key_len
);
961 memcpy(cmd
.mac
, mac_addr
, WMI_MAC_LEN
);
963 return wmi_send(wil
, WMI_ADD_CIPHER_KEY_CMDID
, &cmd
, sizeof(cmd
));
966 int wmi_set_ie(struct wil6210_priv
*wil
, u8 type
, u16 ie_len
, const void *ie
)
969 u16 len
= sizeof(struct wmi_set_appie_cmd
) + ie_len
;
970 struct wmi_set_appie_cmd
*cmd
= kzalloc(len
, GFP_KERNEL
);
974 cmd
->mgmt_frm_type
= type
;
975 /* BUG: FW API define ieLen as u8. Will fix FW */
976 cmd
->ie_len
= cpu_to_le16(ie_len
);
977 memcpy(cmd
->ie_info
, ie
, ie_len
);
978 rc
= wmi_send(wil
, WMI_SET_APPIE_CMDID
, cmd
, len
);
985 * wmi_rxon - turn radio on/off
986 * @on: turn on if true, off otherwise
988 * Only switch radio. Channel should be set separately.
989 * No timeout for rxon - radio turned on forever unless some other call
992 int wmi_rxon(struct wil6210_priv
*wil
, bool on
)
996 struct wil6210_mbox_hdr_wmi wmi
;
997 struct wmi_listen_started_event evt
;
1000 wil_info(wil
, "%s(%s)\n", __func__
, on
? "on" : "off");
1003 rc
= wmi_call(wil
, WMI_START_LISTEN_CMDID
, NULL
, 0,
1004 WMI_LISTEN_STARTED_EVENTID
,
1005 &reply
, sizeof(reply
), 100);
1006 if ((rc
== 0) && (reply
.evt
.status
!= WMI_FW_STATUS_SUCCESS
))
1009 rc
= wmi_call(wil
, WMI_DISCOVERY_STOP_CMDID
, NULL
, 0,
1010 WMI_DISCOVERY_STOPPED_EVENTID
, NULL
, 0, 20);
1016 int wmi_rx_chain_add(struct wil6210_priv
*wil
, struct vring
*vring
)
1018 struct wireless_dev
*wdev
= wil
->wdev
;
1019 struct net_device
*ndev
= wil_to_ndev(wil
);
1020 struct wmi_cfg_rx_chain_cmd cmd
= {
1021 .action
= WMI_RX_CHAIN_ADD
,
1023 .max_mpdu_size
= cpu_to_le16(RX_BUF_LEN
),
1024 .ring_mem_base
= cpu_to_le64(vring
->pa
),
1025 .ring_size
= cpu_to_le16(vring
->size
),
1027 .mid
= 0, /* TODO - what is it? */
1028 .decap_trans_type
= WMI_DECAP_TYPE_802_3
,
1029 .reorder_type
= WMI_RX_SW_REORDER
,
1032 struct wil6210_mbox_hdr_wmi wmi
;
1033 struct wmi_cfg_rx_chain_done_event evt
;
1037 if (wdev
->iftype
== NL80211_IFTYPE_MONITOR
) {
1038 struct ieee80211_channel
*ch
= wdev
->preset_chandef
.chan
;
1040 cmd
.sniffer_cfg
.mode
= cpu_to_le32(WMI_SNIFFER_ON
);
1042 cmd
.sniffer_cfg
.channel
= ch
->hw_value
- 1;
1043 cmd
.sniffer_cfg
.phy_info_mode
=
1044 cpu_to_le32(ndev
->type
== ARPHRD_IEEE80211_RADIOTAP
);
1045 cmd
.sniffer_cfg
.phy_support
=
1046 cpu_to_le32((wil
->monitor_flags
& MONITOR_FLAG_CONTROL
)
1047 ? WMI_SNIFFER_CP
: WMI_SNIFFER_DP
);
1049 /* Initialize offload (in non-sniffer mode).
1050 * Linux IP stack always calculates IP checksum
1051 * HW always calculate TCP/UDP checksum
1053 cmd
.l3_l4_ctrl
|= (1 << L3_L4_CTRL_TCPIP_CHECKSUM_EN_POS
);
1055 /* typical time for secure PCP is 840ms */
1056 rc
= wmi_call(wil
, WMI_CFG_RX_CHAIN_CMDID
, &cmd
, sizeof(cmd
),
1057 WMI_CFG_RX_CHAIN_DONE_EVENTID
, &evt
, sizeof(evt
), 2000);
1061 vring
->hwtail
= le32_to_cpu(evt
.evt
.rx_ring_tail_ptr
);
1063 wil_dbg_misc(wil
, "Rx init: status %d tail 0x%08x\n",
1064 le32_to_cpu(evt
.evt
.status
), vring
->hwtail
);
1066 if (le32_to_cpu(evt
.evt
.status
) != WMI_CFG_RX_CHAIN_SUCCESS
)
1072 int wmi_get_temperature(struct wil6210_priv
*wil
, u32
*t_m
, u32
*t_r
)
1075 struct wmi_temp_sense_cmd cmd
= {
1076 .measure_marlon_m_en
= cpu_to_le32(!!t_m
),
1077 .measure_marlon_r_en
= cpu_to_le32(!!t_r
),
1080 struct wil6210_mbox_hdr_wmi wmi
;
1081 struct wmi_temp_sense_done_event evt
;
1084 rc
= wmi_call(wil
, WMI_TEMP_SENSE_CMDID
, &cmd
, sizeof(cmd
),
1085 WMI_TEMP_SENSE_DONE_EVENTID
, &reply
, sizeof(reply
), 100);
1090 *t_m
= le32_to_cpu(reply
.evt
.marlon_m_t1000
);
1092 *t_r
= le32_to_cpu(reply
.evt
.marlon_r_t1000
);
1097 int wmi_disconnect_sta(struct wil6210_priv
*wil
, const u8
*mac
, u16 reason
)
1099 struct wmi_disconnect_sta_cmd cmd
= {
1100 .disconnect_reason
= cpu_to_le16(reason
),
1102 memcpy(cmd
.dst_mac
, mac
, ETH_ALEN
);
1104 wil_dbg_wmi(wil
, "%s(%pM, reason %d)\n", __func__
, mac
, reason
);
1106 return wmi_send(wil
, WMI_DISCONNECT_STA_CMDID
, &cmd
, sizeof(cmd
));
1109 void wmi_event_flush(struct wil6210_priv
*wil
)
1111 struct pending_wmi_event
*evt
, *t
;
1113 wil_dbg_wmi(wil
, "%s()\n", __func__
);
1115 list_for_each_entry_safe(evt
, t
, &wil
->pending_wmi_ev
, list
) {
1116 list_del(&evt
->list
);
1121 static bool wmi_evt_call_handler(struct wil6210_priv
*wil
, int id
,
1126 for (i
= 0; i
< ARRAY_SIZE(wmi_evt_handlers
); i
++) {
1127 if (wmi_evt_handlers
[i
].eventid
== id
) {
1128 wmi_evt_handlers
[i
].handler(wil
, id
, d
, len
);
1136 static void wmi_event_handle(struct wil6210_priv
*wil
,
1137 struct wil6210_mbox_hdr
*hdr
)
1139 u16 len
= le16_to_cpu(hdr
->len
);
1141 if ((hdr
->type
== WIL_MBOX_HDR_TYPE_WMI
) &&
1142 (len
>= sizeof(struct wil6210_mbox_hdr_wmi
))) {
1143 struct wil6210_mbox_hdr_wmi
*wmi
= (void *)(&hdr
[1]);
1144 void *evt_data
= (void *)(&wmi
[1]);
1145 u16 id
= le16_to_cpu(wmi
->id
);
1146 /* check if someone waits for this event */
1147 if (wil
->reply_id
&& wil
->reply_id
== id
) {
1148 if (wil
->reply_buf
) {
1149 memcpy(wil
->reply_buf
, wmi
,
1150 min(len
, wil
->reply_size
));
1152 wmi_evt_call_handler(wil
, id
, evt_data
,
1153 len
- sizeof(*wmi
));
1155 wil_dbg_wmi(wil
, "Complete WMI 0x%04x\n", id
);
1156 complete(&wil
->wmi_ready
);
1159 /* unsolicited event */
1160 /* search for handler */
1161 if (!wmi_evt_call_handler(wil
, id
, evt_data
,
1162 len
- sizeof(*wmi
))) {
1163 wil_err(wil
, "Unhandled event 0x%04x\n", id
);
1166 wil_err(wil
, "Unknown event type\n");
1167 print_hex_dump(KERN_ERR
, "evt?? ", DUMP_PREFIX_OFFSET
, 16, 1,
1168 hdr
, sizeof(*hdr
) + len
, true);
1173 * Retrieve next WMI event from the pending list
1175 static struct list_head
*next_wmi_ev(struct wil6210_priv
*wil
)
1178 struct list_head
*ret
= NULL
;
1180 spin_lock_irqsave(&wil
->wmi_ev_lock
, flags
);
1182 if (!list_empty(&wil
->pending_wmi_ev
)) {
1183 ret
= wil
->pending_wmi_ev
.next
;
1187 spin_unlock_irqrestore(&wil
->wmi_ev_lock
, flags
);
1193 * Handler for the WMI events
1195 void wmi_event_worker(struct work_struct
*work
)
1197 struct wil6210_priv
*wil
= container_of(work
, struct wil6210_priv
,
1199 struct pending_wmi_event
*evt
;
1200 struct list_head
*lh
;
1202 while ((lh
= next_wmi_ev(wil
)) != NULL
) {
1203 evt
= list_entry(lh
, struct pending_wmi_event
, list
);
1204 wmi_event_handle(wil
, &evt
->event
.hdr
);