2 * Copyright (c) 2010 Broadcom Corporation
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
11 * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
13 * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
14 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
21 #ifndef BRCMFMAC_CORE_H
22 #define BRCMFMAC_CORE_H
26 #define TOE_TX_CSUM_OL 0x00000001
27 #define TOE_RX_CSUM_OL 0x00000002
29 /* For supporting multiple interfaces */
30 #define BRCMF_MAX_IFS 16
32 /* Small, medium and maximum buffer size for dcmd
34 #define BRCMF_DCMD_SMLEN 256
35 #define BRCMF_DCMD_MEDLEN 1536
36 #define BRCMF_DCMD_MAXLEN 8192
38 /* IOCTL from host to device are limited in lenght. A device can only handle
39 * ethernet frame size. This limitation is to be applied by protocol layer.
41 #define BRCMF_TX_IOCTL_MAX_MSG_SIZE (ETH_FRAME_LEN+ETH_FCS_LEN)
43 #define BRCMF_AMPDU_RX_REORDER_MAXFLOWS 256
45 /* Length of firmware version string stored for
46 * ethtool driver info which uses 32 bytes as well.
48 #define BRCMF_DRIVER_FIRMWARE_VERSION_LEN 32
51 * struct brcmf_ampdu_rx_reorder - AMPDU receive reorder info
53 * @pktslots: dynamic allocated array for ordering AMPDU packets.
54 * @flow_id: AMPDU flow identifier.
55 * @cur_idx: last AMPDU index from firmware.
56 * @exp_idx: expected next AMPDU index.
57 * @max_idx: maximum amount of packets per AMPDU.
58 * @pend_pkts: number of packets currently in @pktslots.
60 struct brcmf_ampdu_rx_reorder
{
61 struct sk_buff
**pktslots
;
69 /* Forward decls for struct brcmf_pub (see below) */
70 struct brcmf_proto
; /* device communication protocol info */
71 struct brcmf_cfg80211_dev
; /* cfg80211 device info */
72 struct brcmf_fws_info
; /* firmware signalling info */
75 * struct brcmf_rev_info
77 * The result field stores the error code of the
78 * revision info request from firmware. For the
79 * other fields see struct brcmf_rev_info_le in
82 struct brcmf_rev_info
{
103 /* Common structure for module and instance linkage */
105 /* Linkage ponters */
106 struct brcmf_bus
*bus_if
;
107 struct brcmf_proto
*proto
;
108 struct brcmf_cfg80211_info
*config
;
110 /* Internal brcmf items */
111 uint hdrlen
; /* Total BRCMF header length (proto + bus) */
112 uint rxsz
; /* Rx buffer size bus module should use */
114 /* Dongle media info */
115 char fwver
[BRCMF_DRIVER_FIRMWARE_VERSION_LEN
];
116 u8 mac
[ETH_ALEN
]; /* MAC address obtained from dongle */
118 /* Multicast data packets sent to dongle */
119 unsigned long tx_multicast
;
121 struct brcmf_if
*iflist
[BRCMF_MAX_IFS
];
123 struct mutex proto_block
;
124 unsigned char proto_buf
[BRCMF_DCMD_MAXLEN
];
126 struct brcmf_fweh_info fweh
;
128 struct brcmf_fws_info
*fws
;
130 struct brcmf_ampdu_rx_reorder
131 *reorder_flows
[BRCMF_AMPDU_RX_REORDER_MAXFLOWS
];
136 struct brcmf_rev_info revinfo
;
138 struct dentry
*dbgfs_dir
;
142 /* forward declarations */
143 struct brcmf_cfg80211_vif
;
144 struct brcmf_fws_mac_descriptor
;
147 * enum brcmf_netif_stop_reason - reason for stopping netif queue.
149 * @BRCMF_NETIF_STOP_REASON_FWS_FC:
150 * netif stopped due to firmware signalling flow control.
151 * @BRCMF_NETIF_STOP_REASON_FLOW:
152 * netif stopped due to flowring full.
154 enum brcmf_netif_stop_reason
{
155 BRCMF_NETIF_STOP_REASON_FWS_FC
= 1,
156 BRCMF_NETIF_STOP_REASON_FLOW
= 2
160 * struct brcmf_if - interface control information.
162 * @drvr: points to device related information.
163 * @vif: points to cfg80211 specific interface information.
164 * @ndev: associated network device.
165 * @stats: interface specific network statistics.
166 * @setmacaddr_work: worker object for setting mac address.
167 * @multicast_work: worker object for multicast provisioning.
168 * @fws_desc: interface specific firmware-signalling descriptor.
169 * @ifidx: interface index in device firmware.
170 * @bssidx: index of bss associated with this interface.
171 * @mac_addr: assigned mac address.
172 * @netif_stop: bitmap indicates reason why netif queues are stopped.
173 * @netif_stop_lock: spinlock for update netif_stop from multiple sources.
174 * @pend_8021x_cnt: tracks outstanding number of 802.1x frames.
175 * @pend_8021x_wait: used for signalling change in count.
178 struct brcmf_pub
*drvr
;
179 struct brcmf_cfg80211_vif
*vif
;
180 struct net_device
*ndev
;
181 struct net_device_stats stats
;
182 struct work_struct setmacaddr_work
;
183 struct work_struct multicast_work
;
184 struct brcmf_fws_mac_descriptor
*fws_desc
;
187 u8 mac_addr
[ETH_ALEN
];
189 spinlock_t netif_stop_lock
;
190 atomic_t pend_8021x_cnt
;
191 wait_queue_head_t pend_8021x_wait
;
194 struct brcmf_skb_reorder_data
{
198 int brcmf_netdev_wait_pend8021x(struct brcmf_if
*ifp
);
200 /* Return pointer to interface name */
201 char *brcmf_ifname(struct brcmf_pub
*drvr
, int idx
);
203 int brcmf_net_attach(struct brcmf_if
*ifp
, bool rtnl_locked
);
204 struct brcmf_if
*brcmf_add_if(struct brcmf_pub
*drvr
, s32 bssidx
, s32 ifidx
,
205 char *name
, u8
*mac_addr
);
206 void brcmf_remove_interface(struct brcmf_pub
*drvr
, u32 bssidx
);
207 int brcmf_get_next_free_bsscfgidx(struct brcmf_pub
*drvr
);
208 void brcmf_txflowblock_if(struct brcmf_if
*ifp
,
209 enum brcmf_netif_stop_reason reason
, bool state
);
210 void brcmf_txfinalize(struct brcmf_pub
*drvr
, struct sk_buff
*txp
, u8 ifidx
,
212 void brcmf_netif_rx(struct brcmf_if
*ifp
, struct sk_buff
*skb
);
214 /* Sets dongle media info (drv_version, mac address). */
215 int brcmf_c_preinit_dcmds(struct brcmf_if
*ifp
);
217 #endif /* BRCMFMAC_CORE_H */