brcmfmac: add AMPDU reordering functionality
[deliverable/linux.git] / drivers / net / wireless / brcm80211 / brcmfmac / dhd.h
1 /*
2 * Copyright (c) 2010 Broadcom Corporation
3 *
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
7 *
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
11 * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
13 * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
14 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15 */
16
17 /****************
18 * Common types *
19 */
20
21 #ifndef _BRCMF_H_
22 #define _BRCMF_H_
23
24 #define BRCMF_VERSION_STR "4.218.248.5"
25
26 #include "fweh.h"
27
28 /*******************************************************************************
29 * IO codes that are interpreted by dongle firmware
30 ******************************************************************************/
31 #define BRCMF_C_GET_VERSION 1
32 #define BRCMF_C_UP 2
33 #define BRCMF_C_DOWN 3
34 #define BRCMF_C_SET_PROMISC 10
35 #define BRCMF_C_GET_RATE 12
36 #define BRCMF_C_GET_INFRA 19
37 #define BRCMF_C_SET_INFRA 20
38 #define BRCMF_C_GET_AUTH 21
39 #define BRCMF_C_SET_AUTH 22
40 #define BRCMF_C_GET_BSSID 23
41 #define BRCMF_C_GET_SSID 25
42 #define BRCMF_C_SET_SSID 26
43 #define BRCMF_C_TERMINATED 28
44 #define BRCMF_C_GET_CHANNEL 29
45 #define BRCMF_C_SET_CHANNEL 30
46 #define BRCMF_C_GET_SRL 31
47 #define BRCMF_C_SET_SRL 32
48 #define BRCMF_C_GET_LRL 33
49 #define BRCMF_C_SET_LRL 34
50 #define BRCMF_C_GET_RADIO 37
51 #define BRCMF_C_SET_RADIO 38
52 #define BRCMF_C_GET_PHYTYPE 39
53 #define BRCMF_C_SET_KEY 45
54 #define BRCMF_C_SET_PASSIVE_SCAN 49
55 #define BRCMF_C_SCAN 50
56 #define BRCMF_C_SCAN_RESULTS 51
57 #define BRCMF_C_DISASSOC 52
58 #define BRCMF_C_REASSOC 53
59 #define BRCMF_C_SET_ROAM_TRIGGER 55
60 #define BRCMF_C_SET_ROAM_DELTA 57
61 #define BRCMF_C_GET_BCNPRD 75
62 #define BRCMF_C_SET_BCNPRD 76
63 #define BRCMF_C_GET_DTIMPRD 77
64 #define BRCMF_C_SET_DTIMPRD 78
65 #define BRCMF_C_SET_COUNTRY 84
66 #define BRCMF_C_GET_PM 85
67 #define BRCMF_C_SET_PM 86
68 #define BRCMF_C_GET_CURR_RATESET 114
69 #define BRCMF_C_GET_AP 117
70 #define BRCMF_C_SET_AP 118
71 #define BRCMF_C_GET_RSSI 127
72 #define BRCMF_C_GET_WSEC 133
73 #define BRCMF_C_SET_WSEC 134
74 #define BRCMF_C_GET_PHY_NOISE 135
75 #define BRCMF_C_GET_BSS_INFO 136
76 #define BRCMF_C_GET_BANDLIST 140
77 #define BRCMF_C_SET_SCB_TIMEOUT 158
78 #define BRCMF_C_GET_PHYLIST 180
79 #define BRCMF_C_SET_SCAN_CHANNEL_TIME 185
80 #define BRCMF_C_SET_SCAN_UNASSOC_TIME 187
81 #define BRCMF_C_SCB_DEAUTHENTICATE_FOR_REASON 201
82 #define BRCMF_C_GET_VALID_CHANNELS 217
83 #define BRCMF_C_GET_KEY_PRIMARY 235
84 #define BRCMF_C_SET_KEY_PRIMARY 236
85 #define BRCMF_C_SET_SCAN_PASSIVE_TIME 258
86 #define BRCMF_C_GET_VAR 262
87 #define BRCMF_C_SET_VAR 263
88
89 /* phy types (returned by WLC_GET_PHYTPE) */
90 #define WLC_PHY_TYPE_A 0
91 #define WLC_PHY_TYPE_B 1
92 #define WLC_PHY_TYPE_G 2
93 #define WLC_PHY_TYPE_N 4
94 #define WLC_PHY_TYPE_LP 5
95 #define WLC_PHY_TYPE_SSN 6
96 #define WLC_PHY_TYPE_HT 7
97 #define WLC_PHY_TYPE_LCN 8
98 #define WLC_PHY_TYPE_NULL 0xf
99
100 #define BRCMF_EVENTING_MASK_LEN 16
101
102 #define TOE_TX_CSUM_OL 0x00000001
103 #define TOE_RX_CSUM_OL 0x00000002
104
105 #define BRCMF_BSS_INFO_VERSION 109 /* curr ver of brcmf_bss_info_le struct */
106
107 /* size of brcmf_scan_params not including variable length array */
108 #define BRCMF_SCAN_PARAMS_FIXED_SIZE 64
109
110 /* masks for channel and ssid count */
111 #define BRCMF_SCAN_PARAMS_COUNT_MASK 0x0000ffff
112 #define BRCMF_SCAN_PARAMS_NSSID_SHIFT 16
113
114 /* primary (ie tx) key */
115 #define BRCMF_PRIMARY_KEY (1 << 1)
116
117 /* For supporting multiple interfaces */
118 #define BRCMF_MAX_IFS 16
119
120 #define DOT11_BSSTYPE_ANY 2
121 #define DOT11_MAX_DEFAULT_KEYS 4
122
123 #define BRCMF_ESCAN_REQ_VERSION 1
124
125 #define WLC_BSS_RSSI_ON_CHANNEL 0x0002
126
127 #define BRCMF_MAXRATES_IN_SET 16 /* max # of rates in rateset */
128 #define BRCMF_STA_ASSOC 0x10 /* Associated */
129
130 #define BRCMF_E_STATUS_SUCCESS 0
131 #define BRCMF_E_STATUS_FAIL 1
132 #define BRCMF_E_STATUS_TIMEOUT 2
133 #define BRCMF_E_STATUS_NO_NETWORKS 3
134 #define BRCMF_E_STATUS_ABORT 4
135 #define BRCMF_E_STATUS_NO_ACK 5
136 #define BRCMF_E_STATUS_UNSOLICITED 6
137 #define BRCMF_E_STATUS_ATTEMPT 7
138 #define BRCMF_E_STATUS_PARTIAL 8
139 #define BRCMF_E_STATUS_NEWSCAN 9
140 #define BRCMF_E_STATUS_NEWASSOC 10
141 #define BRCMF_E_STATUS_11HQUIET 11
142 #define BRCMF_E_STATUS_SUPPRESS 12
143 #define BRCMF_E_STATUS_NOCHANS 13
144 #define BRCMF_E_STATUS_CS_ABORT 15
145 #define BRCMF_E_STATUS_ERROR 16
146
147 #define BRCMF_E_REASON_INITIAL_ASSOC 0
148 #define BRCMF_E_REASON_LOW_RSSI 1
149 #define BRCMF_E_REASON_DEAUTH 2
150 #define BRCMF_E_REASON_DISASSOC 3
151 #define BRCMF_E_REASON_BCNS_LOST 4
152 #define BRCMF_E_REASON_MINTXRATE 9
153 #define BRCMF_E_REASON_TXFAIL 10
154
155 #define BRCMF_E_REASON_LINK_BSSCFG_DIS 4
156 #define BRCMF_E_REASON_FAST_ROAM_FAILED 5
157 #define BRCMF_E_REASON_DIRECTED_ROAM 6
158 #define BRCMF_E_REASON_TSPEC_REJECTED 7
159 #define BRCMF_E_REASON_BETTER_AP 8
160
161 #define BRCMF_E_PRUNE_ENCR_MISMATCH 1
162 #define BRCMF_E_PRUNE_BCAST_BSSID 2
163 #define BRCMF_E_PRUNE_MAC_DENY 3
164 #define BRCMF_E_PRUNE_MAC_NA 4
165 #define BRCMF_E_PRUNE_REG_PASSV 5
166 #define BRCMF_E_PRUNE_SPCT_MGMT 6
167 #define BRCMF_E_PRUNE_RADAR 7
168 #define BRCMF_E_RSN_MISMATCH 8
169 #define BRCMF_E_PRUNE_NO_COMMON_RATES 9
170 #define BRCMF_E_PRUNE_BASIC_RATES 10
171 #define BRCMF_E_PRUNE_CIPHER_NA 12
172 #define BRCMF_E_PRUNE_KNOWN_STA 13
173 #define BRCMF_E_PRUNE_WDS_PEER 15
174 #define BRCMF_E_PRUNE_QBSS_LOAD 16
175 #define BRCMF_E_PRUNE_HOME_AP 17
176
177 #define BRCMF_E_SUP_OTHER 0
178 #define BRCMF_E_SUP_DECRYPT_KEY_DATA 1
179 #define BRCMF_E_SUP_BAD_UCAST_WEP128 2
180 #define BRCMF_E_SUP_BAD_UCAST_WEP40 3
181 #define BRCMF_E_SUP_UNSUP_KEY_LEN 4
182 #define BRCMF_E_SUP_PW_KEY_CIPHER 5
183 #define BRCMF_E_SUP_MSG3_TOO_MANY_IE 6
184 #define BRCMF_E_SUP_MSG3_IE_MISMATCH 7
185 #define BRCMF_E_SUP_NO_INSTALL_FLAG 8
186 #define BRCMF_E_SUP_MSG3_NO_GTK 9
187 #define BRCMF_E_SUP_GRP_KEY_CIPHER 10
188 #define BRCMF_E_SUP_GRP_MSG1_NO_GTK 11
189 #define BRCMF_E_SUP_GTK_DECRYPT_FAIL 12
190 #define BRCMF_E_SUP_SEND_FAIL 13
191 #define BRCMF_E_SUP_DEAUTH 14
192
193 #define BRCMF_E_IF_ADD 1
194 #define BRCMF_E_IF_DEL 2
195 #define BRCMF_E_IF_CHANGE 3
196
197 #define BRCMF_E_IF_ROLE_STA 0
198 #define BRCMF_E_IF_ROLE_AP 1
199 #define BRCMF_E_IF_ROLE_WDS 2
200
201 #define BRCMF_E_LINK_BCN_LOSS 1
202 #define BRCMF_E_LINK_DISASSOC 2
203 #define BRCMF_E_LINK_ASSOC_REC 3
204 #define BRCMF_E_LINK_BSSCFG_DIS 4
205
206 /* Small, medium and maximum buffer size for dcmd
207 */
208 #define BRCMF_DCMD_SMLEN 256
209 #define BRCMF_DCMD_MEDLEN 1536
210 #define BRCMF_DCMD_MAXLEN 8192
211
212 #define BRCMF_AMPDU_RX_REORDER_MAXFLOWS 256
213
214 /* Pattern matching filter. Specifies an offset within received packets to
215 * start matching, the pattern to match, the size of the pattern, and a bitmask
216 * that indicates which bits within the pattern should be matched.
217 */
218 struct brcmf_pkt_filter_pattern_le {
219 /*
220 * Offset within received packet to start pattern matching.
221 * Offset '0' is the first byte of the ethernet header.
222 */
223 __le32 offset;
224 /* Size of the pattern. Bitmask must be the same size.*/
225 __le32 size_bytes;
226 /*
227 * Variable length mask and pattern data. mask starts at offset 0.
228 * Pattern immediately follows mask.
229 */
230 u8 mask_and_pattern[1];
231 };
232
233 /* IOVAR "pkt_filter_add" parameter. Used to install packet filters. */
234 struct brcmf_pkt_filter_le {
235 __le32 id; /* Unique filter id, specified by app. */
236 __le32 type; /* Filter type (WL_PKT_FILTER_TYPE_xxx). */
237 __le32 negate_match; /* Negate the result of filter matches */
238 union { /* Filter definitions */
239 struct brcmf_pkt_filter_pattern_le pattern; /* Filter pattern */
240 } u;
241 };
242
243 /* IOVAR "pkt_filter_enable" parameter. */
244 struct brcmf_pkt_filter_enable_le {
245 __le32 id; /* Unique filter id */
246 __le32 enable; /* Enable/disable bool */
247 };
248
249 /* BSS info structure
250 * Applications MUST CHECK ie_offset field and length field to access IEs and
251 * next bss_info structure in a vector (in struct brcmf_scan_results)
252 */
253 struct brcmf_bss_info_le {
254 __le32 version; /* version field */
255 __le32 length; /* byte length of data in this record,
256 * starting at version and including IEs
257 */
258 u8 BSSID[ETH_ALEN];
259 __le16 beacon_period; /* units are Kusec */
260 __le16 capability; /* Capability information */
261 u8 SSID_len;
262 u8 SSID[32];
263 struct {
264 __le32 count; /* # rates in this set */
265 u8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */
266 } rateset; /* supported rates */
267 __le16 chanspec; /* chanspec for bss */
268 __le16 atim_window; /* units are Kusec */
269 u8 dtim_period; /* DTIM period */
270 __le16 RSSI; /* receive signal strength (in dBm) */
271 s8 phy_noise; /* noise (in dBm) */
272
273 u8 n_cap; /* BSS is 802.11N Capable */
274 /* 802.11N BSS Capabilities (based on HT_CAP_*): */
275 __le32 nbss_cap;
276 u8 ctl_ch; /* 802.11N BSS control channel number */
277 __le32 reserved32[1]; /* Reserved for expansion of BSS properties */
278 u8 flags; /* flags */
279 u8 reserved[3]; /* Reserved for expansion of BSS properties */
280 u8 basic_mcs[MCSSET_LEN]; /* 802.11N BSS required MCS set */
281
282 __le16 ie_offset; /* offset at which IEs start, from beginning */
283 __le32 ie_length; /* byte length of Information Elements */
284 __le16 SNR; /* average SNR of during frame reception */
285 /* Add new fields here */
286 /* variable length Information Elements */
287 };
288
289 struct brcm_rateset_le {
290 /* # rates in this set */
291 __le32 count;
292 /* rates in 500kbps units w/hi bit set if basic */
293 u8 rates[BRCMF_MAXRATES_IN_SET];
294 };
295
296 struct brcmf_ssid {
297 u32 SSID_len;
298 unsigned char SSID[32];
299 };
300
301 struct brcmf_ssid_le {
302 __le32 SSID_len;
303 unsigned char SSID[32];
304 };
305
306 struct brcmf_scan_params_le {
307 struct brcmf_ssid_le ssid_le; /* default: {0, ""} */
308 u8 bssid[ETH_ALEN]; /* default: bcast */
309 s8 bss_type; /* default: any,
310 * DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT
311 */
312 u8 scan_type; /* flags, 0 use default */
313 __le32 nprobes; /* -1 use default, number of probes per channel */
314 __le32 active_time; /* -1 use default, dwell time per channel for
315 * active scanning
316 */
317 __le32 passive_time; /* -1 use default, dwell time per channel
318 * for passive scanning
319 */
320 __le32 home_time; /* -1 use default, dwell time for the
321 * home channel between channel scans
322 */
323 __le32 channel_num; /* count of channels and ssids that follow
324 *
325 * low half is count of channels in
326 * channel_list, 0 means default (use all
327 * available channels)
328 *
329 * high half is entries in struct brcmf_ssid
330 * array that follows channel_list, aligned for
331 * s32 (4 bytes) meaning an odd channel count
332 * implies a 2-byte pad between end of
333 * channel_list and first ssid
334 *
335 * if ssid count is zero, single ssid in the
336 * fixed parameter portion is assumed, otherwise
337 * ssid in the fixed portion is ignored
338 */
339 __le16 channel_list[1]; /* list of chanspecs */
340 };
341
342 struct brcmf_scan_results {
343 u32 buflen;
344 u32 version;
345 u32 count;
346 struct brcmf_bss_info_le bss_info_le[];
347 };
348
349 struct brcmf_escan_params_le {
350 __le32 version;
351 __le16 action;
352 __le16 sync_id;
353 struct brcmf_scan_params_le params_le;
354 };
355
356 struct brcmf_escan_result_le {
357 __le32 buflen;
358 __le32 version;
359 __le16 sync_id;
360 __le16 bss_count;
361 struct brcmf_bss_info_le bss_info_le;
362 };
363
364 #define WL_ESCAN_RESULTS_FIXED_SIZE (sizeof(struct brcmf_escan_result_le) - \
365 sizeof(struct brcmf_bss_info_le))
366
367 /* used for association with a specific BSSID and chanspec list */
368 struct brcmf_assoc_params_le {
369 /* 00:00:00:00:00:00: broadcast scan */
370 u8 bssid[ETH_ALEN];
371 /* 0: all available channels, otherwise count of chanspecs in
372 * chanspec_list */
373 __le32 chanspec_num;
374 /* list of chanspecs */
375 __le16 chanspec_list[1];
376 };
377
378 /* used for join with or without a specific bssid and channel list */
379 struct brcmf_join_params {
380 struct brcmf_ssid_le ssid_le;
381 struct brcmf_assoc_params_le params_le;
382 };
383
384 /* scan params for extended join */
385 struct brcmf_join_scan_params_le {
386 u8 scan_type; /* 0 use default, active or passive scan */
387 __le32 nprobes; /* -1 use default, nr of probes per channel */
388 __le32 active_time; /* -1 use default, dwell time per channel for
389 * active scanning
390 */
391 __le32 passive_time; /* -1 use default, dwell time per channel
392 * for passive scanning
393 */
394 __le32 home_time; /* -1 use default, dwell time for the home
395 * channel between channel scans
396 */
397 };
398
399 /* extended join params */
400 struct brcmf_ext_join_params_le {
401 struct brcmf_ssid_le ssid_le; /* {0, ""}: wildcard scan */
402 struct brcmf_join_scan_params_le scan_le;
403 struct brcmf_assoc_params_le assoc_le;
404 };
405
406 struct brcmf_wsec_key {
407 u32 index; /* key index */
408 u32 len; /* key length */
409 u8 data[WLAN_MAX_KEY_LEN]; /* key data */
410 u32 pad_1[18];
411 u32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
412 u32 flags; /* misc flags */
413 u32 pad_2[3];
414 u32 iv_initialized; /* has IV been initialized already? */
415 u32 pad_3;
416 /* Rx IV */
417 struct {
418 u32 hi; /* upper 32 bits of IV */
419 u16 lo; /* lower 16 bits of IV */
420 } rxiv;
421 u32 pad_4[2];
422 u8 ea[ETH_ALEN]; /* per station */
423 };
424
425 /*
426 * dongle requires same struct as above but with fields in little endian order
427 */
428 struct brcmf_wsec_key_le {
429 __le32 index; /* key index */
430 __le32 len; /* key length */
431 u8 data[WLAN_MAX_KEY_LEN]; /* key data */
432 __le32 pad_1[18];
433 __le32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
434 __le32 flags; /* misc flags */
435 __le32 pad_2[3];
436 __le32 iv_initialized; /* has IV been initialized already? */
437 __le32 pad_3;
438 /* Rx IV */
439 struct {
440 __le32 hi; /* upper 32 bits of IV */
441 __le16 lo; /* lower 16 bits of IV */
442 } rxiv;
443 __le32 pad_4[2];
444 u8 ea[ETH_ALEN]; /* per station */
445 };
446
447 /* Used to get specific STA parameters */
448 struct brcmf_scb_val_le {
449 __le32 val;
450 u8 ea[ETH_ALEN];
451 };
452
453 /* channel encoding */
454 struct brcmf_channel_info_le {
455 __le32 hw_channel;
456 __le32 target_channel;
457 __le32 scan_channel;
458 };
459
460 struct brcmf_sta_info_le {
461 __le16 ver; /* version of this struct */
462 __le16 len; /* length in bytes of this structure */
463 __le16 cap; /* sta's advertised capabilities */
464 __le32 flags; /* flags defined below */
465 __le32 idle; /* time since data pkt rx'd from sta */
466 u8 ea[ETH_ALEN]; /* Station address */
467 __le32 count; /* # rates in this set */
468 u8 rates[BRCMF_MAXRATES_IN_SET]; /* rates in 500kbps units */
469 /* w/hi bit set if basic */
470 __le32 in; /* seconds elapsed since associated */
471 __le32 listen_interval_inms; /* Min Listen interval in ms for STA */
472 __le32 tx_pkts; /* # of packets transmitted */
473 __le32 tx_failures; /* # of packets failed */
474 __le32 rx_ucast_pkts; /* # of unicast packets received */
475 __le32 rx_mcast_pkts; /* # of multicast packets received */
476 __le32 tx_rate; /* Rate of last successful tx frame */
477 __le32 rx_rate; /* Rate of last successful rx frame */
478 __le32 rx_decrypt_succeeds; /* # of packet decrypted successfully */
479 __le32 rx_decrypt_failures; /* # of packet decrypted failed */
480 };
481
482 struct brcmf_chanspec_list {
483 __le32 count; /* # of entries */
484 __le32 element[1]; /* variable length uint32 list */
485 };
486
487 /*
488 * WLC_E_PROBRESP_MSG
489 * WLC_E_P2P_PROBREQ_MSG
490 * WLC_E_ACTION_FRAME_RX
491 */
492 struct brcmf_rx_mgmt_data {
493 __be16 version;
494 __be16 chanspec;
495 __be32 rssi;
496 __be32 mactime;
497 __be32 rate;
498 };
499
500 /* Bus independent dongle command */
501 struct brcmf_dcmd {
502 uint cmd; /* common dongle cmd definition */
503 void *buf; /* pointer to user buffer */
504 uint len; /* length of user buffer */
505 u8 set; /* get or set request (optional) */
506 uint used; /* bytes read or written (optional) */
507 uint needed; /* bytes needed (optional) */
508 };
509
510 /**
511 * struct brcmf_ampdu_rx_reorder - AMPDU receive reorder info
512 *
513 * @pktslots: dynamic allocated array for ordering AMPDU packets.
514 * @flow_id: AMPDU flow identifier.
515 * @cur_idx: last AMPDU index from firmware.
516 * @exp_idx: expected next AMPDU index.
517 * @max_idx: maximum amount of packets per AMPDU.
518 * @pend_pkts: number of packets currently in @pktslots.
519 */
520 struct brcmf_ampdu_rx_reorder {
521 struct sk_buff **pktslots;
522 u8 flow_id;
523 u8 cur_idx;
524 u8 exp_idx;
525 u8 max_idx;
526 u8 pend_pkts;
527 };
528
529 /* Forward decls for struct brcmf_pub (see below) */
530 struct brcmf_proto; /* device communication protocol info */
531 struct brcmf_cfg80211_dev; /* cfg80211 device info */
532 struct brcmf_fws_info; /* firmware signalling info */
533
534 /* Common structure for module and instance linkage */
535 struct brcmf_pub {
536 /* Linkage ponters */
537 struct brcmf_bus *bus_if;
538 struct brcmf_proto *prot;
539 struct brcmf_cfg80211_info *config;
540
541 /* Internal brcmf items */
542 uint hdrlen; /* Total BRCMF header length (proto + bus) */
543 uint rxsz; /* Rx buffer size bus module should use */
544 u8 wme_dp; /* wme discard priority */
545
546 /* Dongle media info */
547 unsigned long drv_version; /* Version of dongle-resident driver */
548 u8 mac[ETH_ALEN]; /* MAC address obtained from dongle */
549
550 /* Multicast data packets sent to dongle */
551 unsigned long tx_multicast;
552
553 struct brcmf_if *iflist[BRCMF_MAX_IFS];
554
555 struct mutex proto_block;
556 unsigned char proto_buf[BRCMF_DCMD_MAXLEN];
557
558 struct brcmf_fweh_info fweh;
559
560 bool fw_signals;
561 struct brcmf_fws_info *fws;
562 spinlock_t fws_spinlock;
563
564 struct brcmf_ampdu_rx_reorder
565 *reorder_flows[BRCMF_AMPDU_RX_REORDER_MAXFLOWS];
566 #ifdef DEBUG
567 struct dentry *dbgfs_dir;
568 #endif
569 };
570
571 struct brcmf_if_event {
572 u8 ifidx;
573 u8 action;
574 u8 flags;
575 u8 bssidx;
576 u8 role;
577 };
578
579 /* forward declarations */
580 struct brcmf_cfg80211_vif;
581 struct brcmf_fws_mac_descriptor;
582
583 /**
584 * enum brcmf_netif_stop_reason - reason for stopping netif queue.
585 *
586 * @BRCMF_NETIF_STOP_REASON_FWS_FC:
587 * netif stopped due to firmware signalling flow control.
588 * @BRCMF_NETIF_STOP_REASON_BLOCK_BUS:
589 * netif stopped due to bus blocking.
590 */
591 enum brcmf_netif_stop_reason {
592 BRCMF_NETIF_STOP_REASON_FWS_FC = 1,
593 BRCMF_NETIF_STOP_REASON_BLOCK_BUS = 2
594 };
595
596 /**
597 * struct brcmf_if - interface control information.
598 *
599 * @drvr: points to device related information.
600 * @vif: points to cfg80211 specific interface information.
601 * @ndev: associated network device.
602 * @stats: interface specific network statistics.
603 * @setmacaddr_work: worker object for setting mac address.
604 * @multicast_work: worker object for multicast provisioning.
605 * @fws_desc: interface specific firmware-signalling descriptor.
606 * @ifidx: interface index in device firmware.
607 * @bssidx: index of bss associated with this interface.
608 * @mac_addr: assigned mac address.
609 * @netif_stop: bitmap indicates reason why netif queues are stopped.
610 * @netif_stop_lock: spinlock for update netif_stop from multiple sources.
611 * @pend_8021x_cnt: tracks outstanding number of 802.1x frames.
612 * @pend_8021x_wait: used for signalling change in count.
613 */
614 struct brcmf_if {
615 struct brcmf_pub *drvr;
616 struct brcmf_cfg80211_vif *vif;
617 struct net_device *ndev;
618 struct net_device_stats stats;
619 struct work_struct setmacaddr_work;
620 struct work_struct multicast_work;
621 struct brcmf_fws_mac_descriptor *fws_desc;
622 int ifidx;
623 s32 bssidx;
624 u8 mac_addr[ETH_ALEN];
625 u8 netif_stop;
626 spinlock_t netif_stop_lock;
627 atomic_t pend_8021x_cnt;
628 wait_queue_head_t pend_8021x_wait;
629 };
630
631 struct brcmf_skb_reorder_data {
632 u8 *reorder;
633 };
634
635 extern int brcmf_netdev_wait_pend8021x(struct net_device *ndev);
636
637 /* Return pointer to interface name */
638 extern char *brcmf_ifname(struct brcmf_pub *drvr, int idx);
639
640 /* Query dongle */
641 extern int brcmf_proto_cdc_query_dcmd(struct brcmf_pub *drvr, int ifidx,
642 uint cmd, void *buf, uint len);
643 extern int brcmf_proto_cdc_set_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd,
644 void *buf, uint len);
645
646 /* Remove any protocol-specific data header. */
647 extern int brcmf_proto_hdrpull(struct brcmf_pub *drvr, bool do_fws, u8 *ifidx,
648 struct sk_buff *rxp);
649
650 extern int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked);
651 extern struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx,
652 s32 ifidx, char *name, u8 *mac_addr);
653 extern void brcmf_del_if(struct brcmf_pub *drvr, s32 bssidx);
654 void brcmf_txflowblock_if(struct brcmf_if *ifp,
655 enum brcmf_netif_stop_reason reason, bool state);
656 extern u32 brcmf_get_chip_info(struct brcmf_if *ifp);
657 extern void brcmf_txfinalize(struct brcmf_pub *drvr, struct sk_buff *txp,
658 bool success);
659
660 #endif /* _BRCMF_H_ */
This page took 0.056566 seconds and 5 git commands to generate.