2 * Copyright (c) 2010 Broadcom Corporation
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
11 * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
13 * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
14 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
24 #define BRCMF_VERSION_STR "4.218.248.5"
28 /*******************************************************************************
29 * IO codes that are interpreted by dongle firmware
30 ******************************************************************************/
31 #define BRCMF_C_GET_VERSION 1
33 #define BRCMF_C_DOWN 3
34 #define BRCMF_C_SET_PROMISC 10
35 #define BRCMF_C_GET_RATE 12
36 #define BRCMF_C_GET_INFRA 19
37 #define BRCMF_C_SET_INFRA 20
38 #define BRCMF_C_GET_AUTH 21
39 #define BRCMF_C_SET_AUTH 22
40 #define BRCMF_C_GET_BSSID 23
41 #define BRCMF_C_GET_SSID 25
42 #define BRCMF_C_SET_SSID 26
43 #define BRCMF_C_TERMINATED 28
44 #define BRCMF_C_GET_CHANNEL 29
45 #define BRCMF_C_SET_CHANNEL 30
46 #define BRCMF_C_GET_SRL 31
47 #define BRCMF_C_SET_SRL 32
48 #define BRCMF_C_GET_LRL 33
49 #define BRCMF_C_SET_LRL 34
50 #define BRCMF_C_GET_RADIO 37
51 #define BRCMF_C_SET_RADIO 38
52 #define BRCMF_C_GET_PHYTYPE 39
53 #define BRCMF_C_SET_KEY 45
54 #define BRCMF_C_SET_PASSIVE_SCAN 49
55 #define BRCMF_C_SCAN 50
56 #define BRCMF_C_SCAN_RESULTS 51
57 #define BRCMF_C_DISASSOC 52
58 #define BRCMF_C_REASSOC 53
59 #define BRCMF_C_SET_ROAM_TRIGGER 55
60 #define BRCMF_C_SET_ROAM_DELTA 57
61 #define BRCMF_C_GET_BCNPRD 75
62 #define BRCMF_C_SET_BCNPRD 76
63 #define BRCMF_C_GET_DTIMPRD 77
64 #define BRCMF_C_SET_DTIMPRD 78
65 #define BRCMF_C_SET_COUNTRY 84
66 #define BRCMF_C_GET_PM 85
67 #define BRCMF_C_SET_PM 86
68 #define BRCMF_C_GET_CURR_RATESET 114
69 #define BRCMF_C_GET_AP 117
70 #define BRCMF_C_SET_AP 118
71 #define BRCMF_C_GET_RSSI 127
72 #define BRCMF_C_GET_WSEC 133
73 #define BRCMF_C_SET_WSEC 134
74 #define BRCMF_C_GET_PHY_NOISE 135
75 #define BRCMF_C_GET_BSS_INFO 136
76 #define BRCMF_C_GET_BANDLIST 140
77 #define BRCMF_C_SET_SCB_TIMEOUT 158
78 #define BRCMF_C_GET_PHYLIST 180
79 #define BRCMF_C_SET_SCAN_CHANNEL_TIME 185
80 #define BRCMF_C_SET_SCAN_UNASSOC_TIME 187
81 #define BRCMF_C_SCB_DEAUTHENTICATE_FOR_REASON 201
82 #define BRCMF_C_GET_VALID_CHANNELS 217
83 #define BRCMF_C_GET_KEY_PRIMARY 235
84 #define BRCMF_C_SET_KEY_PRIMARY 236
85 #define BRCMF_C_SET_SCAN_PASSIVE_TIME 258
86 #define BRCMF_C_GET_VAR 262
87 #define BRCMF_C_SET_VAR 263
89 /* phy types (returned by WLC_GET_PHYTPE) */
90 #define WLC_PHY_TYPE_A 0
91 #define WLC_PHY_TYPE_B 1
92 #define WLC_PHY_TYPE_G 2
93 #define WLC_PHY_TYPE_N 4
94 #define WLC_PHY_TYPE_LP 5
95 #define WLC_PHY_TYPE_SSN 6
96 #define WLC_PHY_TYPE_HT 7
97 #define WLC_PHY_TYPE_LCN 8
98 #define WLC_PHY_TYPE_NULL 0xf
100 #define TOE_TX_CSUM_OL 0x00000001
101 #define TOE_RX_CSUM_OL 0x00000002
103 #define BRCMF_BSS_INFO_VERSION 109 /* curr ver of brcmf_bss_info_le struct */
105 /* size of brcmf_scan_params not including variable length array */
106 #define BRCMF_SCAN_PARAMS_FIXED_SIZE 64
108 /* masks for channel and ssid count */
109 #define BRCMF_SCAN_PARAMS_COUNT_MASK 0x0000ffff
110 #define BRCMF_SCAN_PARAMS_NSSID_SHIFT 16
112 /* primary (ie tx) key */
113 #define BRCMF_PRIMARY_KEY (1 << 1)
115 /* For supporting multiple interfaces */
116 #define BRCMF_MAX_IFS 16
118 #define DOT11_BSSTYPE_ANY 2
119 #define DOT11_MAX_DEFAULT_KEYS 4
121 #define BRCMF_ESCAN_REQ_VERSION 1
123 #define WLC_BSS_RSSI_ON_CHANNEL 0x0002
125 #define BRCMF_MAXRATES_IN_SET 16 /* max # of rates in rateset */
126 #define BRCMF_STA_ASSOC 0x10 /* Associated */
128 #define BRCMF_E_STATUS_SUCCESS 0
129 #define BRCMF_E_STATUS_FAIL 1
130 #define BRCMF_E_STATUS_TIMEOUT 2
131 #define BRCMF_E_STATUS_NO_NETWORKS 3
132 #define BRCMF_E_STATUS_ABORT 4
133 #define BRCMF_E_STATUS_NO_ACK 5
134 #define BRCMF_E_STATUS_UNSOLICITED 6
135 #define BRCMF_E_STATUS_ATTEMPT 7
136 #define BRCMF_E_STATUS_PARTIAL 8
137 #define BRCMF_E_STATUS_NEWSCAN 9
138 #define BRCMF_E_STATUS_NEWASSOC 10
139 #define BRCMF_E_STATUS_11HQUIET 11
140 #define BRCMF_E_STATUS_SUPPRESS 12
141 #define BRCMF_E_STATUS_NOCHANS 13
142 #define BRCMF_E_STATUS_CS_ABORT 15
143 #define BRCMF_E_STATUS_ERROR 16
145 #define BRCMF_E_REASON_INITIAL_ASSOC 0
146 #define BRCMF_E_REASON_LOW_RSSI 1
147 #define BRCMF_E_REASON_DEAUTH 2
148 #define BRCMF_E_REASON_DISASSOC 3
149 #define BRCMF_E_REASON_BCNS_LOST 4
150 #define BRCMF_E_REASON_MINTXRATE 9
151 #define BRCMF_E_REASON_TXFAIL 10
153 #define BRCMF_E_REASON_LINK_BSSCFG_DIS 4
154 #define BRCMF_E_REASON_FAST_ROAM_FAILED 5
155 #define BRCMF_E_REASON_DIRECTED_ROAM 6
156 #define BRCMF_E_REASON_TSPEC_REJECTED 7
157 #define BRCMF_E_REASON_BETTER_AP 8
159 #define BRCMF_E_PRUNE_ENCR_MISMATCH 1
160 #define BRCMF_E_PRUNE_BCAST_BSSID 2
161 #define BRCMF_E_PRUNE_MAC_DENY 3
162 #define BRCMF_E_PRUNE_MAC_NA 4
163 #define BRCMF_E_PRUNE_REG_PASSV 5
164 #define BRCMF_E_PRUNE_SPCT_MGMT 6
165 #define BRCMF_E_PRUNE_RADAR 7
166 #define BRCMF_E_RSN_MISMATCH 8
167 #define BRCMF_E_PRUNE_NO_COMMON_RATES 9
168 #define BRCMF_E_PRUNE_BASIC_RATES 10
169 #define BRCMF_E_PRUNE_CIPHER_NA 12
170 #define BRCMF_E_PRUNE_KNOWN_STA 13
171 #define BRCMF_E_PRUNE_WDS_PEER 15
172 #define BRCMF_E_PRUNE_QBSS_LOAD 16
173 #define BRCMF_E_PRUNE_HOME_AP 17
175 #define BRCMF_E_SUP_OTHER 0
176 #define BRCMF_E_SUP_DECRYPT_KEY_DATA 1
177 #define BRCMF_E_SUP_BAD_UCAST_WEP128 2
178 #define BRCMF_E_SUP_BAD_UCAST_WEP40 3
179 #define BRCMF_E_SUP_UNSUP_KEY_LEN 4
180 #define BRCMF_E_SUP_PW_KEY_CIPHER 5
181 #define BRCMF_E_SUP_MSG3_TOO_MANY_IE 6
182 #define BRCMF_E_SUP_MSG3_IE_MISMATCH 7
183 #define BRCMF_E_SUP_NO_INSTALL_FLAG 8
184 #define BRCMF_E_SUP_MSG3_NO_GTK 9
185 #define BRCMF_E_SUP_GRP_KEY_CIPHER 10
186 #define BRCMF_E_SUP_GRP_MSG1_NO_GTK 11
187 #define BRCMF_E_SUP_GTK_DECRYPT_FAIL 12
188 #define BRCMF_E_SUP_SEND_FAIL 13
189 #define BRCMF_E_SUP_DEAUTH 14
191 #define BRCMF_E_IF_ADD 1
192 #define BRCMF_E_IF_DEL 2
193 #define BRCMF_E_IF_CHANGE 3
195 #define BRCMF_E_IF_FLAG_NOIF 1
197 #define BRCMF_E_IF_ROLE_STA 0
198 #define BRCMF_E_IF_ROLE_AP 1
199 #define BRCMF_E_IF_ROLE_WDS 2
201 #define BRCMF_E_LINK_BCN_LOSS 1
202 #define BRCMF_E_LINK_DISASSOC 2
203 #define BRCMF_E_LINK_ASSOC_REC 3
204 #define BRCMF_E_LINK_BSSCFG_DIS 4
206 /* Small, medium and maximum buffer size for dcmd
208 #define BRCMF_DCMD_SMLEN 256
209 #define BRCMF_DCMD_MEDLEN 1536
210 #define BRCMF_DCMD_MAXLEN 8192
212 #define BRCMF_AMPDU_RX_REORDER_MAXFLOWS 256
214 /* Length of firmware version string stored for
215 * ethtool driver info which uses 32 bytes as well.
217 #define BRCMF_DRIVER_FIRMWARE_VERSION_LEN 32
219 /* Pattern matching filter. Specifies an offset within received packets to
220 * start matching, the pattern to match, the size of the pattern, and a bitmask
221 * that indicates which bits within the pattern should be matched.
223 struct brcmf_pkt_filter_pattern_le
{
225 * Offset within received packet to start pattern matching.
226 * Offset '0' is the first byte of the ethernet header.
229 /* Size of the pattern. Bitmask must be the same size.*/
232 * Variable length mask and pattern data. mask starts at offset 0.
233 * Pattern immediately follows mask.
235 u8 mask_and_pattern
[1];
238 /* IOVAR "pkt_filter_add" parameter. Used to install packet filters. */
239 struct brcmf_pkt_filter_le
{
240 __le32 id
; /* Unique filter id, specified by app. */
241 __le32 type
; /* Filter type (WL_PKT_FILTER_TYPE_xxx). */
242 __le32 negate_match
; /* Negate the result of filter matches */
243 union { /* Filter definitions */
244 struct brcmf_pkt_filter_pattern_le pattern
; /* Filter pattern */
248 /* IOVAR "pkt_filter_enable" parameter. */
249 struct brcmf_pkt_filter_enable_le
{
250 __le32 id
; /* Unique filter id */
251 __le32 enable
; /* Enable/disable bool */
254 /* BSS info structure
255 * Applications MUST CHECK ie_offset field and length field to access IEs and
256 * next bss_info structure in a vector (in struct brcmf_scan_results)
258 struct brcmf_bss_info_le
{
259 __le32 version
; /* version field */
260 __le32 length
; /* byte length of data in this record,
261 * starting at version and including IEs
264 __le16 beacon_period
; /* units are Kusec */
265 __le16 capability
; /* Capability information */
269 __le32 count
; /* # rates in this set */
270 u8 rates
[16]; /* rates in 500kbps units w/hi bit set if basic */
271 } rateset
; /* supported rates */
272 __le16 chanspec
; /* chanspec for bss */
273 __le16 atim_window
; /* units are Kusec */
274 u8 dtim_period
; /* DTIM period */
275 __le16 RSSI
; /* receive signal strength (in dBm) */
276 s8 phy_noise
; /* noise (in dBm) */
278 u8 n_cap
; /* BSS is 802.11N Capable */
279 /* 802.11N BSS Capabilities (based on HT_CAP_*): */
281 u8 ctl_ch
; /* 802.11N BSS control channel number */
282 __le32 reserved32
[1]; /* Reserved for expansion of BSS properties */
283 u8 flags
; /* flags */
284 u8 reserved
[3]; /* Reserved for expansion of BSS properties */
285 u8 basic_mcs
[MCSSET_LEN
]; /* 802.11N BSS required MCS set */
287 __le16 ie_offset
; /* offset at which IEs start, from beginning */
288 __le32 ie_length
; /* byte length of Information Elements */
289 __le16 SNR
; /* average SNR of during frame reception */
290 /* Add new fields here */
291 /* variable length Information Elements */
294 struct brcm_rateset_le
{
295 /* # rates in this set */
297 /* rates in 500kbps units w/hi bit set if basic */
298 u8 rates
[BRCMF_MAXRATES_IN_SET
];
303 unsigned char SSID
[32];
306 struct brcmf_ssid_le
{
308 unsigned char SSID
[32];
311 struct brcmf_scan_params_le
{
312 struct brcmf_ssid_le ssid_le
; /* default: {0, ""} */
313 u8 bssid
[ETH_ALEN
]; /* default: bcast */
314 s8 bss_type
; /* default: any,
315 * DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT
317 u8 scan_type
; /* flags, 0 use default */
318 __le32 nprobes
; /* -1 use default, number of probes per channel */
319 __le32 active_time
; /* -1 use default, dwell time per channel for
322 __le32 passive_time
; /* -1 use default, dwell time per channel
323 * for passive scanning
325 __le32 home_time
; /* -1 use default, dwell time for the
326 * home channel between channel scans
328 __le32 channel_num
; /* count of channels and ssids that follow
330 * low half is count of channels in
331 * channel_list, 0 means default (use all
332 * available channels)
334 * high half is entries in struct brcmf_ssid
335 * array that follows channel_list, aligned for
336 * s32 (4 bytes) meaning an odd channel count
337 * implies a 2-byte pad between end of
338 * channel_list and first ssid
340 * if ssid count is zero, single ssid in the
341 * fixed parameter portion is assumed, otherwise
342 * ssid in the fixed portion is ignored
344 __le16 channel_list
[1]; /* list of chanspecs */
347 struct brcmf_scan_results
{
351 struct brcmf_bss_info_le bss_info_le
[];
354 struct brcmf_escan_params_le
{
358 struct brcmf_scan_params_le params_le
;
361 struct brcmf_escan_result_le
{
366 struct brcmf_bss_info_le bss_info_le
;
369 #define WL_ESCAN_RESULTS_FIXED_SIZE (sizeof(struct brcmf_escan_result_le) - \
370 sizeof(struct brcmf_bss_info_le))
372 /* used for association with a specific BSSID and chanspec list */
373 struct brcmf_assoc_params_le
{
374 /* 00:00:00:00:00:00: broadcast scan */
376 /* 0: all available channels, otherwise count of chanspecs in
379 /* list of chanspecs */
380 __le16 chanspec_list
[1];
383 /* used for join with or without a specific bssid and channel list */
384 struct brcmf_join_params
{
385 struct brcmf_ssid_le ssid_le
;
386 struct brcmf_assoc_params_le params_le
;
389 /* scan params for extended join */
390 struct brcmf_join_scan_params_le
{
391 u8 scan_type
; /* 0 use default, active or passive scan */
392 __le32 nprobes
; /* -1 use default, nr of probes per channel */
393 __le32 active_time
; /* -1 use default, dwell time per channel for
396 __le32 passive_time
; /* -1 use default, dwell time per channel
397 * for passive scanning
399 __le32 home_time
; /* -1 use default, dwell time for the home
400 * channel between channel scans
404 /* extended join params */
405 struct brcmf_ext_join_params_le
{
406 struct brcmf_ssid_le ssid_le
; /* {0, ""}: wildcard scan */
407 struct brcmf_join_scan_params_le scan_le
;
408 struct brcmf_assoc_params_le assoc_le
;
411 struct brcmf_wsec_key
{
412 u32 index
; /* key index */
413 u32 len
; /* key length */
414 u8 data
[WLAN_MAX_KEY_LEN
]; /* key data */
416 u32 algo
; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
417 u32 flags
; /* misc flags */
419 u32 iv_initialized
; /* has IV been initialized already? */
423 u32 hi
; /* upper 32 bits of IV */
424 u16 lo
; /* lower 16 bits of IV */
427 u8 ea
[ETH_ALEN
]; /* per station */
431 * dongle requires same struct as above but with fields in little endian order
433 struct brcmf_wsec_key_le
{
434 __le32 index
; /* key index */
435 __le32 len
; /* key length */
436 u8 data
[WLAN_MAX_KEY_LEN
]; /* key data */
438 __le32 algo
; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
439 __le32 flags
; /* misc flags */
441 __le32 iv_initialized
; /* has IV been initialized already? */
445 __le32 hi
; /* upper 32 bits of IV */
446 __le16 lo
; /* lower 16 bits of IV */
449 u8 ea
[ETH_ALEN
]; /* per station */
452 /* Used to get specific STA parameters */
453 struct brcmf_scb_val_le
{
458 /* channel encoding */
459 struct brcmf_channel_info_le
{
461 __le32 target_channel
;
465 struct brcmf_sta_info_le
{
466 __le16 ver
; /* version of this struct */
467 __le16 len
; /* length in bytes of this structure */
468 __le16 cap
; /* sta's advertised capabilities */
469 __le32 flags
; /* flags defined below */
470 __le32 idle
; /* time since data pkt rx'd from sta */
471 u8 ea
[ETH_ALEN
]; /* Station address */
472 __le32 count
; /* # rates in this set */
473 u8 rates
[BRCMF_MAXRATES_IN_SET
]; /* rates in 500kbps units */
474 /* w/hi bit set if basic */
475 __le32 in
; /* seconds elapsed since associated */
476 __le32 listen_interval_inms
; /* Min Listen interval in ms for STA */
477 __le32 tx_pkts
; /* # of packets transmitted */
478 __le32 tx_failures
; /* # of packets failed */
479 __le32 rx_ucast_pkts
; /* # of unicast packets received */
480 __le32 rx_mcast_pkts
; /* # of multicast packets received */
481 __le32 tx_rate
; /* Rate of last successful tx frame */
482 __le32 rx_rate
; /* Rate of last successful rx frame */
483 __le32 rx_decrypt_succeeds
; /* # of packet decrypted successfully */
484 __le32 rx_decrypt_failures
; /* # of packet decrypted failed */
487 struct brcmf_chanspec_list
{
488 __le32 count
; /* # of entries */
489 __le32 element
[1]; /* variable length uint32 list */
494 * WLC_E_P2P_PROBREQ_MSG
495 * WLC_E_ACTION_FRAME_RX
497 struct brcmf_rx_mgmt_data
{
505 /* Bus independent dongle command */
507 uint cmd
; /* common dongle cmd definition */
508 void *buf
; /* pointer to user buffer */
509 uint len
; /* length of user buffer */
510 u8 set
; /* get or set request (optional) */
511 uint used
; /* bytes read or written (optional) */
512 uint needed
; /* bytes needed (optional) */
516 * struct brcmf_ampdu_rx_reorder - AMPDU receive reorder info
518 * @pktslots: dynamic allocated array for ordering AMPDU packets.
519 * @flow_id: AMPDU flow identifier.
520 * @cur_idx: last AMPDU index from firmware.
521 * @exp_idx: expected next AMPDU index.
522 * @max_idx: maximum amount of packets per AMPDU.
523 * @pend_pkts: number of packets currently in @pktslots.
525 struct brcmf_ampdu_rx_reorder
{
526 struct sk_buff
**pktslots
;
534 /* Forward decls for struct brcmf_pub (see below) */
535 struct brcmf_proto
; /* device communication protocol info */
536 struct brcmf_cfg80211_dev
; /* cfg80211 device info */
537 struct brcmf_fws_info
; /* firmware signalling info */
539 /* Common structure for module and instance linkage */
541 /* Linkage ponters */
542 struct brcmf_bus
*bus_if
;
543 struct brcmf_proto
*proto
;
544 struct brcmf_cfg80211_info
*config
;
546 /* Internal brcmf items */
547 uint hdrlen
; /* Total BRCMF header length (proto + bus) */
548 uint rxsz
; /* Rx buffer size bus module should use */
549 u8 wme_dp
; /* wme discard priority */
551 /* Dongle media info */
552 char fwver
[BRCMF_DRIVER_FIRMWARE_VERSION_LEN
];
553 u8 mac
[ETH_ALEN
]; /* MAC address obtained from dongle */
555 /* Multicast data packets sent to dongle */
556 unsigned long tx_multicast
;
558 struct brcmf_if
*iflist
[BRCMF_MAX_IFS
];
560 struct mutex proto_block
;
561 unsigned char proto_buf
[BRCMF_DCMD_MAXLEN
];
563 struct brcmf_fweh_info fweh
;
565 struct brcmf_fws_info
*fws
;
567 struct brcmf_ampdu_rx_reorder
568 *reorder_flows
[BRCMF_AMPDU_RX_REORDER_MAXFLOWS
];
570 struct dentry
*dbgfs_dir
;
574 struct brcmf_if_event
{
582 /* forward declarations */
583 struct brcmf_cfg80211_vif
;
584 struct brcmf_fws_mac_descriptor
;
587 * enum brcmf_netif_stop_reason - reason for stopping netif queue.
589 * @BRCMF_NETIF_STOP_REASON_FWS_FC:
590 * netif stopped due to firmware signalling flow control.
591 * @BRCMF_NETIF_STOP_REASON_BLOCK_BUS:
592 * netif stopped due to bus blocking.
594 enum brcmf_netif_stop_reason
{
595 BRCMF_NETIF_STOP_REASON_FWS_FC
= 1,
596 BRCMF_NETIF_STOP_REASON_BLOCK_BUS
= 2
600 * struct brcmf_if - interface control information.
602 * @drvr: points to device related information.
603 * @vif: points to cfg80211 specific interface information.
604 * @ndev: associated network device.
605 * @stats: interface specific network statistics.
606 * @setmacaddr_work: worker object for setting mac address.
607 * @multicast_work: worker object for multicast provisioning.
608 * @fws_desc: interface specific firmware-signalling descriptor.
609 * @ifidx: interface index in device firmware.
610 * @bssidx: index of bss associated with this interface.
611 * @mac_addr: assigned mac address.
612 * @netif_stop: bitmap indicates reason why netif queues are stopped.
613 * @netif_stop_lock: spinlock for update netif_stop from multiple sources.
614 * @pend_8021x_cnt: tracks outstanding number of 802.1x frames.
615 * @pend_8021x_wait: used for signalling change in count.
618 struct brcmf_pub
*drvr
;
619 struct brcmf_cfg80211_vif
*vif
;
620 struct net_device
*ndev
;
621 struct net_device_stats stats
;
622 struct work_struct setmacaddr_work
;
623 struct work_struct multicast_work
;
624 struct brcmf_fws_mac_descriptor
*fws_desc
;
627 u8 mac_addr
[ETH_ALEN
];
629 spinlock_t netif_stop_lock
;
630 atomic_t pend_8021x_cnt
;
631 wait_queue_head_t pend_8021x_wait
;
634 struct brcmf_skb_reorder_data
{
638 int brcmf_netdev_wait_pend8021x(struct net_device
*ndev
);
640 /* Return pointer to interface name */
641 char *brcmf_ifname(struct brcmf_pub
*drvr
, int idx
);
643 int brcmf_net_attach(struct brcmf_if
*ifp
, bool rtnl_locked
);
644 struct brcmf_if
*brcmf_add_if(struct brcmf_pub
*drvr
, s32 bssidx
, s32 ifidx
,
645 char *name
, u8
*mac_addr
);
646 void brcmf_del_if(struct brcmf_pub
*drvr
, s32 bssidx
);
647 void brcmf_txflowblock_if(struct brcmf_if
*ifp
,
648 enum brcmf_netif_stop_reason reason
, bool state
);
649 u32
brcmf_get_chip_info(struct brcmf_if
*ifp
);
650 void brcmf_txfinalize(struct brcmf_pub
*drvr
, struct sk_buff
*txp
,
653 /* Sets dongle media info (drv_version, mac address). */
654 int brcmf_c_preinit_dcmds(struct brcmf_if
*ifp
);
656 #endif /* _BRCMF_H_ */