drivers/net/wireless/hostap/Kconfig

   1 config HOSTAP
   2         tristate "IEEE 802.11 for Host AP (Prism2/2.5/3 and WEP/TKIP/CCMP)"
   3         depends on NET_RADIO
   4         select IEEE80211
   5         select IEEE80211_CRYPT_WEP
   6         ---help---
   7         Shared driver code for IEEE 802.11b wireless cards based on
   8         Intersil Prism2/2.5/3 chipset. This driver supports so called
   9         Host AP mode that allows the card to act as an IEEE 802.11
  10         access point.
  11
  12         See <http://hostap.epitest.fi/> for more information about the
  13         Host AP driver configuration and tools. This site includes
  14         information and tools (hostapd and wpa_supplicant) for WPA/WPA2
  15         support.
  16
  17         This option includes the base Host AP driver code that is shared by
  18         different hardware models. You will also need to enable support for
  19         PLX/PCI/CS version of the driver to actually use the driver.
  20
  21         The driver can be compiled as a module and it will be called
  22         "hostap.ko".
  23
  24 config HOSTAP_FIRMWARE
  25         bool "Support downloading firmware images with Host AP driver"
  26         depends on HOSTAP
  27         ---help---
  28         Configure Host AP driver to include support for firmware image
  29         download. This option by itself only enables downloading to the
  30         volatile memory, i.e. the card RAM. This option is required to
  31         support cards that don't have firmware in flash, such as D-Link
  32         DWL-520 rev E and D-Link DWL-650 rev P.
  33
  34         Firmware image downloading needs a user space tool, prism2_srec.
  35         It is available from http://hostap.epitest.fi/.
  36
  37 config HOSTAP_FIRMWARE_NVRAM
  38         bool "Support for non-volatile firmware download"
  39         depends on HOSTAP_FIRMWARE
  40         ---help---
  41         Allow Host AP driver to write firmware images to the non-volatile
  42         card memory, i.e. flash memory that survives power cycling.
  43         Enable this option if you want to be able to change card firmware
  44         permanently.
  45
  46         Firmware image downloading needs a user space tool, prism2_srec.
  47         It is available from http://hostap.epitest.fi/.
  48
  49 config HOSTAP_PLX
  50         tristate "Host AP driver for Prism2/2.5/3 in PLX9052 PCI adaptors"
  51         depends on PCI && HOSTAP
  52         ---help---
  53         Host AP driver's version for Prism2/2.5/3 PC Cards in PLX9052 based
  54         PCI adaptors.
  55
  56         "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this
  57         driver and its help text includes more information about the Host AP
  58         driver.
  59
  60         The driver can be compiled as a module and will be named
  61         "hostap_plx.ko".
  62
  63 config HOSTAP_PCI
  64         tristate "Host AP driver for Prism2.5 PCI adaptors"
  65         depends on PCI && HOSTAP
  66         ---help---
  67         Host AP driver's version for Prism2.5 PCI adaptors.
  68
  69         "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this
  70         driver and its help text includes more information about the Host AP
  71         driver.
  72
  73         The driver can be compiled as a module and will be named
  74         "hostap_pci.ko".
  75
  76 config HOSTAP_CS
  77         tristate "Host AP driver for Prism2/2.5/3 PC Cards"
  78         depends on PCMCIA && HOSTAP
  79         ---help---
  80         Host AP driver's version for Prism2/2.5/3 PC Cards.
  81
  82         "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this
  83         driver and its help text includes more information about the Host AP
  84         driver.
  85
  86         The driver can be compiled as a module and will be named
  87         "hostap_cs.ko".