1 /******************************************************************************
3 Copyright(c) 2003 - 2006 Intel Corporation. All rights reserved.
5 This program is free software; you can redistribute it and/or modify it
6 under the terms of version 2 of the GNU General Public License as
7 published by the Free Software Foundation.
9 This program is distributed in the hope that it will be useful, but WITHOUT
10 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 You should have received a copy of the GNU General Public License along with
15 this program; if not, write to the Free Software Foundation, Inc., 59
16 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
18 The full GNU General Public License is included in this distribution in the
22 Intel Linux Wireless <ilw@linux.intel.com>
23 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 Portions of this file are based on the sample_* files provided by Wireless
26 Extensions 0.26 package and copyright (c) 1997-2003 Jean Tourrilhes
29 Portions of this file are based on the Host AP project,
30 Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
32 Copyright (c) 2002-2003, Jouni Malinen <j@w1.fi>
34 Portions of ipw2100_mod_firmware_load, ipw2100_do_mod_firmware_load, and
35 ipw2100_fw_load are loosely based on drivers/sound/sound_firmware.c
36 available in the 2.4.25 kernel sources, and are copyright (c) Alan Cox
38 ******************************************************************************/
41 Initial driver on which this is based was developed by Janusz Gorycki,
42 Maciej Urbaniak, and Maciej Sosnowski.
44 Promiscuous mode support added by Jacek Wysoczynski and Maciej Urbaniak.
48 Tx - Commands and Data
50 Firmware and host share a circular queue of Transmit Buffer Descriptors (TBDs)
51 Each TBD contains a pointer to the physical (dma_addr_t) address of data being
52 sent to the firmware as well as the length of the data.
54 The host writes to the TBD queue at the WRITE index. The WRITE index points
55 to the _next_ packet to be written and is advanced when after the TBD has been
58 The firmware pulls from the TBD queue at the READ index. The READ index points
59 to the currently being read entry, and is advanced once the firmware is
62 When data is sent to the firmware, the first TBD is used to indicate to the
63 firmware if a Command or Data is being sent. If it is Command, all of the
64 command information is contained within the physical address referred to by the
65 TBD. If it is Data, the first TBD indicates the type of data packet, number
66 of fragments, etc. The next TBD then refers to the actual packet location.
68 The Tx flow cycle is as follows:
70 1) ipw2100_tx() is called by kernel with SKB to transmit
71 2) Packet is move from the tx_free_list and appended to the transmit pending
73 3) work is scheduled to move pending packets into the shared circular queue.
74 4) when placing packet in the circular queue, the incoming SKB is DMA mapped
75 to a physical address. That address is entered into a TBD. Two TBDs are
76 filled out. The first indicating a data packet, the second referring to the
78 5) the packet is removed from tx_pend_list and placed on the end of the
79 firmware pending list (fw_pend_list)
80 6) firmware is notified that the WRITE index has
81 7) Once the firmware has processed the TBD, INTA is triggered.
82 8) For each Tx interrupt received from the firmware, the READ index is checked
83 to see which TBDs are done being processed.
84 9) For each TBD that has been processed, the ISR pulls the oldest packet
85 from the fw_pend_list.
86 10)The packet structure contained in the fw_pend_list is then used
87 to unmap the DMA address and to free the SKB originally passed to the driver
89 11)The packet structure is placed onto the tx_free_list
91 The above steps are the same for commands, only the msg_free_list/msg_pend_list
92 are used instead of tx_free_list/tx_pend_list
96 Critical Sections / Locking :
98 There are two locks utilized. The first is the low level lock (priv->low_lock)
99 that protects the following:
101 - Access to the Tx/Rx queue lists via priv->low_lock. The lists are as follows:
103 tx_free_list : Holds pre-allocated Tx buffers.
104 TAIL modified in __ipw2100_tx_process()
105 HEAD modified in ipw2100_tx()
107 tx_pend_list : Holds used Tx buffers waiting to go into the TBD ring
108 TAIL modified ipw2100_tx()
109 HEAD modified by ipw2100_tx_send_data()
111 msg_free_list : Holds pre-allocated Msg (Command) buffers
112 TAIL modified in __ipw2100_tx_process()
113 HEAD modified in ipw2100_hw_send_command()
115 msg_pend_list : Holds used Msg buffers waiting to go into the TBD ring
116 TAIL modified in ipw2100_hw_send_command()
117 HEAD modified in ipw2100_tx_send_commands()
119 The flow of data on the TX side is as follows:
121 MSG_FREE_LIST + COMMAND => MSG_PEND_LIST => TBD => MSG_FREE_LIST
122 TX_FREE_LIST + DATA => TX_PEND_LIST => TBD => TX_FREE_LIST
124 The methods that work on the TBD ring are protected via priv->low_lock.
126 - The internal data state of the device itself
127 - Access to the firmware read/write indexes for the BD queues
130 All external entry functions are locked with the priv->action_lock to ensure
131 that only one external action is invoked at a time.
136 #include <linux/compiler.h>
137 #include <linux/errno.h>
138 #include <linux/if_arp.h>
139 #include <linux/in6.h>
140 #include <linux/in.h>
141 #include <linux/ip.h>
142 #include <linux/kernel.h>
143 #include <linux/kmod.h>
144 #include <linux/module.h>
145 #include <linux/netdevice.h>
146 #include <linux/ethtool.h>
147 #include <linux/pci.h>
148 #include <linux/dma-mapping.h>
149 #include <linux/proc_fs.h>
150 #include <linux/skbuff.h>
151 #include <asm/uaccess.h>
153 #include <linux/fs.h>
154 #include <linux/mm.h>
155 #include <linux/slab.h>
156 #include <linux/unistd.h>
157 #include <linux/stringify.h>
158 #include <linux/tcp.h>
159 #include <linux/types.h>
160 #include <linux/time.h>
161 #include <linux/firmware.h>
162 #include <linux/acpi.h>
163 #include <linux/ctype.h>
164 #include <linux/pm_qos.h>
166 #include <net/lib80211.h>
171 #define IPW2100_VERSION "git-1.2.2"
173 #define DRV_NAME "ipw2100"
174 #define DRV_VERSION IPW2100_VERSION
175 #define DRV_DESCRIPTION "Intel(R) PRO/Wireless 2100 Network Driver"
176 #define DRV_COPYRIGHT "Copyright(c) 2003-2006 Intel Corporation"
178 static struct pm_qos_request ipw2100_pm_qos_req
;
180 /* Debugging stuff */
181 #ifdef CONFIG_IPW2100_DEBUG
182 #define IPW2100_RX_DEBUG /* Reception debugging */
185 MODULE_DESCRIPTION(DRV_DESCRIPTION
);
186 MODULE_VERSION(DRV_VERSION
);
187 MODULE_AUTHOR(DRV_COPYRIGHT
);
188 MODULE_LICENSE("GPL");
190 static int debug
= 0;
191 static int network_mode
= 0;
192 static int channel
= 0;
193 static int associate
= 0;
194 static int disable
= 0;
196 static struct ipw2100_fw ipw2100_firmware
;
199 #include <linux/moduleparam.h>
200 module_param(debug
, int, 0444);
201 module_param_named(mode
, network_mode
, int, 0444);
202 module_param(channel
, int, 0444);
203 module_param(associate
, int, 0444);
204 module_param(disable
, int, 0444);
206 MODULE_PARM_DESC(debug
, "debug level");
207 MODULE_PARM_DESC(mode
, "network mode (0=BSS,1=IBSS,2=Monitor)");
208 MODULE_PARM_DESC(channel
, "channel");
209 MODULE_PARM_DESC(associate
, "auto associate when scanning (default off)");
210 MODULE_PARM_DESC(disable
, "manually disable the radio (default 0 [radio on])");
212 static u32 ipw2100_debug_level
= IPW_DL_NONE
;
214 #ifdef CONFIG_IPW2100_DEBUG
215 #define IPW_DEBUG(level, message...) \
217 if (ipw2100_debug_level & (level)) { \
218 printk(KERN_DEBUG "ipw2100: %c %s ", \
219 in_interrupt() ? 'I' : 'U', __func__); \
224 #define IPW_DEBUG(level, message...) do {} while (0)
225 #endif /* CONFIG_IPW2100_DEBUG */
227 #ifdef CONFIG_IPW2100_DEBUG
228 static const char *command_types
[] = {
230 "unused", /* HOST_ATTENTION */
232 "unused", /* SLEEP */
233 "unused", /* HOST_POWER_DOWN */
236 "unused", /* SET_IMR */
239 "AUTHENTICATION_TYPE",
242 "INTERNATIONAL_MODE",
257 "CLEAR_ALL_MULTICAST",
278 "AP_OR_STATION_TABLE",
282 "unused", /* SAVE_CALIBRATION */
283 "unused", /* RESTORE_CALIBRATION */
287 "HOST_PRE_POWER_DOWN",
288 "unused", /* HOST_INTERRUPT_COALESCING */
290 "CARD_DISABLE_PHY_OFF",
293 "SET_STATION_STAT_BITS",
294 "CLEAR_STATIONS_STAT_BITS",
296 "SET_SECURITY_INFORMATION",
297 "DISASSOCIATION_BSSID",
302 static const long ipw2100_frequencies
[] = {
303 2412, 2417, 2422, 2427,
304 2432, 2437, 2442, 2447,
305 2452, 2457, 2462, 2467,
309 #define FREQ_COUNT ARRAY_SIZE(ipw2100_frequencies)
311 static struct ieee80211_rate ipw2100_bg_rates
[] = {
313 { .bitrate
= 20, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
314 { .bitrate
= 55, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
315 { .bitrate
= 110, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
318 #define RATE_COUNT ARRAY_SIZE(ipw2100_bg_rates)
320 /* Pre-decl until we get the code solid and then we can clean it up */
321 static void ipw2100_tx_send_commands(struct ipw2100_priv
*priv
);
322 static void ipw2100_tx_send_data(struct ipw2100_priv
*priv
);
323 static int ipw2100_adapter_setup(struct ipw2100_priv
*priv
);
325 static void ipw2100_queues_initialize(struct ipw2100_priv
*priv
);
326 static void ipw2100_queues_free(struct ipw2100_priv
*priv
);
327 static int ipw2100_queues_allocate(struct ipw2100_priv
*priv
);
329 static int ipw2100_fw_download(struct ipw2100_priv
*priv
,
330 struct ipw2100_fw
*fw
);
331 static int ipw2100_get_firmware(struct ipw2100_priv
*priv
,
332 struct ipw2100_fw
*fw
);
333 static int ipw2100_get_fwversion(struct ipw2100_priv
*priv
, char *buf
,
335 static int ipw2100_get_ucodeversion(struct ipw2100_priv
*priv
, char *buf
,
337 static void ipw2100_release_firmware(struct ipw2100_priv
*priv
,
338 struct ipw2100_fw
*fw
);
339 static int ipw2100_ucode_download(struct ipw2100_priv
*priv
,
340 struct ipw2100_fw
*fw
);
341 static void ipw2100_wx_event_work(struct work_struct
*work
);
342 static struct iw_statistics
*ipw2100_wx_wireless_stats(struct net_device
*dev
);
343 static struct iw_handler_def ipw2100_wx_handler_def
;
345 static inline void read_register(struct net_device
*dev
, u32 reg
, u32
* val
)
347 struct ipw2100_priv
*priv
= libipw_priv(dev
);
349 *val
= ioread32(priv
->ioaddr
+ reg
);
350 IPW_DEBUG_IO("r: 0x%08X => 0x%08X\n", reg
, *val
);
353 static inline void write_register(struct net_device
*dev
, u32 reg
, u32 val
)
355 struct ipw2100_priv
*priv
= libipw_priv(dev
);
357 iowrite32(val
, priv
->ioaddr
+ reg
);
358 IPW_DEBUG_IO("w: 0x%08X <= 0x%08X\n", reg
, val
);
361 static inline void read_register_word(struct net_device
*dev
, u32 reg
,
364 struct ipw2100_priv
*priv
= libipw_priv(dev
);
366 *val
= ioread16(priv
->ioaddr
+ reg
);
367 IPW_DEBUG_IO("r: 0x%08X => %04X\n", reg
, *val
);
370 static inline void read_register_byte(struct net_device
*dev
, u32 reg
, u8
* val
)
372 struct ipw2100_priv
*priv
= libipw_priv(dev
);
374 *val
= ioread8(priv
->ioaddr
+ reg
);
375 IPW_DEBUG_IO("r: 0x%08X => %02X\n", reg
, *val
);
378 static inline void write_register_word(struct net_device
*dev
, u32 reg
, u16 val
)
380 struct ipw2100_priv
*priv
= libipw_priv(dev
);
382 iowrite16(val
, priv
->ioaddr
+ reg
);
383 IPW_DEBUG_IO("w: 0x%08X <= %04X\n", reg
, val
);
386 static inline void write_register_byte(struct net_device
*dev
, u32 reg
, u8 val
)
388 struct ipw2100_priv
*priv
= libipw_priv(dev
);
390 iowrite8(val
, priv
->ioaddr
+ reg
);
391 IPW_DEBUG_IO("w: 0x%08X =< %02X\n", reg
, val
);
394 static inline void read_nic_dword(struct net_device
*dev
, u32 addr
, u32
* val
)
396 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
397 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
398 read_register(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
401 static inline void write_nic_dword(struct net_device
*dev
, u32 addr
, u32 val
)
403 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
404 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
405 write_register(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
408 static inline void read_nic_word(struct net_device
*dev
, u32 addr
, u16
* val
)
410 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
411 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
412 read_register_word(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
415 static inline void write_nic_word(struct net_device
*dev
, u32 addr
, u16 val
)
417 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
418 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
419 write_register_word(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
422 static inline void read_nic_byte(struct net_device
*dev
, u32 addr
, u8
* val
)
424 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
425 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
426 read_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
429 static inline void write_nic_byte(struct net_device
*dev
, u32 addr
, u8 val
)
431 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
432 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
433 write_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
436 static inline void write_nic_auto_inc_address(struct net_device
*dev
, u32 addr
)
438 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
,
439 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
442 static inline void write_nic_dword_auto_inc(struct net_device
*dev
, u32 val
)
444 write_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, val
);
447 static void write_nic_memory(struct net_device
*dev
, u32 addr
, u32 len
,
455 /* read first nibble byte by byte */
456 aligned_addr
= addr
& (~0x3);
457 dif_len
= addr
- aligned_addr
;
459 /* Start reading at aligned_addr + dif_len */
460 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
462 for (i
= dif_len
; i
< 4; i
++, buf
++)
463 write_register_byte(dev
,
464 IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
471 /* read DWs through autoincrement registers */
472 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
, aligned_addr
);
473 aligned_len
= len
& (~0x3);
474 for (i
= 0; i
< aligned_len
; i
+= 4, buf
+= 4, aligned_addr
+= 4)
475 write_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, *(u32
*) buf
);
477 /* copy the last nibble */
478 dif_len
= len
- aligned_len
;
479 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
, aligned_addr
);
480 for (i
= 0; i
< dif_len
; i
++, buf
++)
481 write_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
485 static void read_nic_memory(struct net_device
*dev
, u32 addr
, u32 len
,
493 /* read first nibble byte by byte */
494 aligned_addr
= addr
& (~0x3);
495 dif_len
= addr
- aligned_addr
;
497 /* Start reading at aligned_addr + dif_len */
498 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
500 for (i
= dif_len
; i
< 4; i
++, buf
++)
501 read_register_byte(dev
,
502 IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
509 /* read DWs through autoincrement registers */
510 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
, aligned_addr
);
511 aligned_len
= len
& (~0x3);
512 for (i
= 0; i
< aligned_len
; i
+= 4, buf
+= 4, aligned_addr
+= 4)
513 read_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, (u32
*) buf
);
515 /* copy the last nibble */
516 dif_len
= len
- aligned_len
;
517 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
, aligned_addr
);
518 for (i
= 0; i
< dif_len
; i
++, buf
++)
519 read_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
+ i
, buf
);
522 static bool ipw2100_hw_is_adapter_in_system(struct net_device
*dev
)
526 read_register(dev
, IPW_REG_DOA_DEBUG_AREA_START
, &dbg
);
528 return dbg
== IPW_DATA_DOA_DEBUG_VALUE
;
531 static int ipw2100_get_ordinal(struct ipw2100_priv
*priv
, u32 ord
,
532 void *val
, u32
* len
)
534 struct ipw2100_ordinals
*ordinals
= &priv
->ordinals
;
541 if (ordinals
->table1_addr
== 0) {
542 printk(KERN_WARNING DRV_NAME
": attempt to use fw ordinals "
543 "before they have been loaded.\n");
547 if (IS_ORDINAL_TABLE_ONE(ordinals
, ord
)) {
548 if (*len
< IPW_ORD_TAB_1_ENTRY_SIZE
) {
549 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
551 printk(KERN_WARNING DRV_NAME
552 ": ordinal buffer length too small, need %zd\n",
553 IPW_ORD_TAB_1_ENTRY_SIZE
);
558 read_nic_dword(priv
->net_dev
,
559 ordinals
->table1_addr
+ (ord
<< 2), &addr
);
560 read_nic_dword(priv
->net_dev
, addr
, val
);
562 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
567 if (IS_ORDINAL_TABLE_TWO(ordinals
, ord
)) {
569 ord
-= IPW_START_ORD_TAB_2
;
571 /* get the address of statistic */
572 read_nic_dword(priv
->net_dev
,
573 ordinals
->table2_addr
+ (ord
<< 3), &addr
);
575 /* get the second DW of statistics ;
576 * two 16-bit words - first is length, second is count */
577 read_nic_dword(priv
->net_dev
,
578 ordinals
->table2_addr
+ (ord
<< 3) + sizeof(u32
),
581 /* get each entry length */
582 field_len
= *((u16
*) & field_info
);
584 /* get number of entries */
585 field_count
= *(((u16
*) & field_info
) + 1);
587 /* abort if no enough memory */
588 total_length
= field_len
* field_count
;
589 if (total_length
> *len
) {
598 /* read the ordinal data from the SRAM */
599 read_nic_memory(priv
->net_dev
, addr
, total_length
, val
);
604 printk(KERN_WARNING DRV_NAME
": ordinal %d neither in table 1 nor "
605 "in table 2\n", ord
);
610 static int ipw2100_set_ordinal(struct ipw2100_priv
*priv
, u32 ord
, u32
* val
,
613 struct ipw2100_ordinals
*ordinals
= &priv
->ordinals
;
616 if (IS_ORDINAL_TABLE_ONE(ordinals
, ord
)) {
617 if (*len
!= IPW_ORD_TAB_1_ENTRY_SIZE
) {
618 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
619 IPW_DEBUG_INFO("wrong size\n");
623 read_nic_dword(priv
->net_dev
,
624 ordinals
->table1_addr
+ (ord
<< 2), &addr
);
626 write_nic_dword(priv
->net_dev
, addr
, *val
);
628 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
633 IPW_DEBUG_INFO("wrong table\n");
634 if (IS_ORDINAL_TABLE_TWO(ordinals
, ord
))
640 static char *snprint_line(char *buf
, size_t count
,
641 const u8
* data
, u32 len
, u32 ofs
)
646 out
= snprintf(buf
, count
, "%08X", ofs
);
648 for (l
= 0, i
= 0; i
< 2; i
++) {
649 out
+= snprintf(buf
+ out
, count
- out
, " ");
650 for (j
= 0; j
< 8 && l
< len
; j
++, l
++)
651 out
+= snprintf(buf
+ out
, count
- out
, "%02X ",
654 out
+= snprintf(buf
+ out
, count
- out
, " ");
657 out
+= snprintf(buf
+ out
, count
- out
, " ");
658 for (l
= 0, i
= 0; i
< 2; i
++) {
659 out
+= snprintf(buf
+ out
, count
- out
, " ");
660 for (j
= 0; j
< 8 && l
< len
; j
++, l
++) {
661 c
= data
[(i
* 8 + j
)];
662 if (!isascii(c
) || !isprint(c
))
665 out
+= snprintf(buf
+ out
, count
- out
, "%c", c
);
669 out
+= snprintf(buf
+ out
, count
- out
, " ");
675 static void printk_buf(int level
, const u8
* data
, u32 len
)
679 if (!(ipw2100_debug_level
& level
))
683 printk(KERN_DEBUG
"%s\n",
684 snprint_line(line
, sizeof(line
), &data
[ofs
],
685 min(len
, 16U), ofs
));
687 len
-= min(len
, 16U);
691 #define MAX_RESET_BACKOFF 10
693 static void schedule_reset(struct ipw2100_priv
*priv
)
695 unsigned long now
= get_seconds();
697 /* If we haven't received a reset request within the backoff period,
698 * then we can reset the backoff interval so this reset occurs
700 if (priv
->reset_backoff
&&
701 (now
- priv
->last_reset
> priv
->reset_backoff
))
702 priv
->reset_backoff
= 0;
704 priv
->last_reset
= get_seconds();
706 if (!(priv
->status
& STATUS_RESET_PENDING
)) {
707 IPW_DEBUG_INFO("%s: Scheduling firmware restart (%ds).\n",
708 priv
->net_dev
->name
, priv
->reset_backoff
);
709 netif_carrier_off(priv
->net_dev
);
710 netif_stop_queue(priv
->net_dev
);
711 priv
->status
|= STATUS_RESET_PENDING
;
712 if (priv
->reset_backoff
)
713 schedule_delayed_work(&priv
->reset_work
,
714 priv
->reset_backoff
* HZ
);
716 schedule_delayed_work(&priv
->reset_work
, 0);
718 if (priv
->reset_backoff
< MAX_RESET_BACKOFF
)
719 priv
->reset_backoff
++;
721 wake_up_interruptible(&priv
->wait_command_queue
);
723 IPW_DEBUG_INFO("%s: Firmware restart already in progress.\n",
724 priv
->net_dev
->name
);
728 #define HOST_COMPLETE_TIMEOUT (2 * HZ)
729 static int ipw2100_hw_send_command(struct ipw2100_priv
*priv
,
730 struct host_command
*cmd
)
732 struct list_head
*element
;
733 struct ipw2100_tx_packet
*packet
;
737 IPW_DEBUG_HC("Sending %s command (#%d), %d bytes\n",
738 command_types
[cmd
->host_command
], cmd
->host_command
,
739 cmd
->host_command_length
);
740 printk_buf(IPW_DL_HC
, (u8
*) cmd
->host_command_parameters
,
741 cmd
->host_command_length
);
743 spin_lock_irqsave(&priv
->low_lock
, flags
);
745 if (priv
->fatal_error
) {
747 ("Attempt to send command while hardware in fatal error condition.\n");
752 if (!(priv
->status
& STATUS_RUNNING
)) {
754 ("Attempt to send command while hardware is not running.\n");
759 if (priv
->status
& STATUS_CMD_ACTIVE
) {
761 ("Attempt to send command while another command is pending.\n");
766 if (list_empty(&priv
->msg_free_list
)) {
767 IPW_DEBUG_INFO("no available msg buffers\n");
771 priv
->status
|= STATUS_CMD_ACTIVE
;
772 priv
->messages_sent
++;
774 element
= priv
->msg_free_list
.next
;
776 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
777 packet
->jiffy_start
= jiffies
;
779 /* initialize the firmware command packet */
780 packet
->info
.c_struct
.cmd
->host_command_reg
= cmd
->host_command
;
781 packet
->info
.c_struct
.cmd
->host_command_reg1
= cmd
->host_command1
;
782 packet
->info
.c_struct
.cmd
->host_command_len_reg
=
783 cmd
->host_command_length
;
784 packet
->info
.c_struct
.cmd
->sequence
= cmd
->host_command_sequence
;
786 memcpy(packet
->info
.c_struct
.cmd
->host_command_params_reg
,
787 cmd
->host_command_parameters
,
788 sizeof(packet
->info
.c_struct
.cmd
->host_command_params_reg
));
791 DEC_STAT(&priv
->msg_free_stat
);
793 list_add_tail(element
, &priv
->msg_pend_list
);
794 INC_STAT(&priv
->msg_pend_stat
);
796 ipw2100_tx_send_commands(priv
);
797 ipw2100_tx_send_data(priv
);
799 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
802 * We must wait for this command to complete before another
803 * command can be sent... but if we wait more than 3 seconds
804 * then there is a problem.
808 wait_event_interruptible_timeout(priv
->wait_command_queue
,
810 status
& STATUS_CMD_ACTIVE
),
811 HOST_COMPLETE_TIMEOUT
);
814 IPW_DEBUG_INFO("Command completion failed out after %dms.\n",
815 1000 * (HOST_COMPLETE_TIMEOUT
/ HZ
));
816 priv
->fatal_error
= IPW2100_ERR_MSG_TIMEOUT
;
817 priv
->status
&= ~STATUS_CMD_ACTIVE
;
818 schedule_reset(priv
);
822 if (priv
->fatal_error
) {
823 printk(KERN_WARNING DRV_NAME
": %s: firmware fatal error\n",
824 priv
->net_dev
->name
);
828 /* !!!!! HACK TEST !!!!!
829 * When lots of debug trace statements are enabled, the driver
830 * doesn't seem to have as many firmware restart cycles...
832 * As a test, we're sticking in a 1/100s delay here */
833 schedule_timeout_uninterruptible(msecs_to_jiffies(10));
838 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
844 * Verify the values and data access of the hardware
845 * No locks needed or used. No functions called.
847 static int ipw2100_verify(struct ipw2100_priv
*priv
)
852 u32 val1
= 0x76543210;
853 u32 val2
= 0xFEDCBA98;
855 /* Domain 0 check - all values should be DOA_DEBUG */
856 for (address
= IPW_REG_DOA_DEBUG_AREA_START
;
857 address
< IPW_REG_DOA_DEBUG_AREA_END
; address
+= sizeof(u32
)) {
858 read_register(priv
->net_dev
, address
, &data1
);
859 if (data1
!= IPW_DATA_DOA_DEBUG_VALUE
)
863 /* Domain 1 check - use arbitrary read/write compare */
864 for (address
= 0; address
< 5; address
++) {
865 /* The memory area is not used now */
866 write_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x32,
868 write_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x36,
870 read_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x32,
872 read_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x36,
874 if (val1
== data1
&& val2
== data2
)
883 * Loop until the CARD_DISABLED bit is the same value as the
886 * TODO: See if it would be more efficient to do a wait/wake
887 * cycle and have the completion event trigger the wakeup
890 #define IPW_CARD_DISABLE_COMPLETE_WAIT 100 // 100 milli
891 static int ipw2100_wait_for_card_state(struct ipw2100_priv
*priv
, int state
)
895 u32 len
= sizeof(card_state
);
898 for (i
= 0; i
<= IPW_CARD_DISABLE_COMPLETE_WAIT
* 1000; i
+= 50) {
899 err
= ipw2100_get_ordinal(priv
, IPW_ORD_CARD_DISABLED
,
902 IPW_DEBUG_INFO("Query of CARD_DISABLED ordinal "
907 /* We'll break out if either the HW state says it is
908 * in the state we want, or if HOST_COMPLETE command
910 if ((card_state
== state
) ||
911 ((priv
->status
& STATUS_ENABLED
) ?
912 IPW_HW_STATE_ENABLED
: IPW_HW_STATE_DISABLED
) == state
) {
913 if (state
== IPW_HW_STATE_ENABLED
)
914 priv
->status
|= STATUS_ENABLED
;
916 priv
->status
&= ~STATUS_ENABLED
;
924 IPW_DEBUG_INFO("ipw2100_wait_for_card_state to %s state timed out\n",
925 state
? "DISABLED" : "ENABLED");
929 /*********************************************************************
930 Procedure : sw_reset_and_clock
931 Purpose : Asserts s/w reset, asserts clock initialization
932 and waits for clock stabilization
933 ********************************************************************/
934 static int sw_reset_and_clock(struct ipw2100_priv
*priv
)
940 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
941 IPW_AUX_HOST_RESET_REG_SW_RESET
);
943 // wait for clock stabilization
944 for (i
= 0; i
< 1000; i
++) {
945 udelay(IPW_WAIT_RESET_ARC_COMPLETE_DELAY
);
947 // check clock ready bit
948 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, &r
);
949 if (r
& IPW_AUX_HOST_RESET_REG_PRINCETON_RESET
)
954 return -EIO
; // TODO: better error value
956 /* set "initialization complete" bit to move adapter to
958 write_register(priv
->net_dev
, IPW_REG_GP_CNTRL
,
959 IPW_AUX_HOST_GP_CNTRL_BIT_INIT_DONE
);
961 /* wait for clock stabilization */
962 for (i
= 0; i
< 10000; i
++) {
963 udelay(IPW_WAIT_CLOCK_STABILIZATION_DELAY
* 4);
965 /* check clock ready bit */
966 read_register(priv
->net_dev
, IPW_REG_GP_CNTRL
, &r
);
967 if (r
& IPW_AUX_HOST_GP_CNTRL_BIT_CLOCK_READY
)
972 return -EIO
; /* TODO: better error value */
974 /* set D0 standby bit */
975 read_register(priv
->net_dev
, IPW_REG_GP_CNTRL
, &r
);
976 write_register(priv
->net_dev
, IPW_REG_GP_CNTRL
,
977 r
| IPW_AUX_HOST_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY
);
982 /*********************************************************************
983 Procedure : ipw2100_download_firmware
984 Purpose : Initiaze adapter after power on.
986 1. assert s/w reset first!
987 2. awake clocks & wait for clock stabilization
988 3. hold ARC (don't ask me why...)
989 4. load Dino ucode and reset/clock init again
990 5. zero-out shared mem
992 *******************************************************************/
993 static int ipw2100_download_firmware(struct ipw2100_priv
*priv
)
999 /* Fetch the firmware and microcode */
1000 struct ipw2100_fw ipw2100_firmware
;
1003 if (priv
->fatal_error
) {
1004 IPW_DEBUG_ERROR("%s: ipw2100_download_firmware called after "
1005 "fatal error %d. Interface must be brought down.\n",
1006 priv
->net_dev
->name
, priv
->fatal_error
);
1010 if (!ipw2100_firmware
.version
) {
1011 err
= ipw2100_get_firmware(priv
, &ipw2100_firmware
);
1013 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
1014 priv
->net_dev
->name
, err
);
1015 priv
->fatal_error
= IPW2100_ERR_FW_LOAD
;
1020 err
= ipw2100_get_firmware(priv
, &ipw2100_firmware
);
1022 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
1023 priv
->net_dev
->name
, err
);
1024 priv
->fatal_error
= IPW2100_ERR_FW_LOAD
;
1028 priv
->firmware_version
= ipw2100_firmware
.version
;
1030 /* s/w reset and clock stabilization */
1031 err
= sw_reset_and_clock(priv
);
1033 IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n",
1034 priv
->net_dev
->name
, err
);
1038 err
= ipw2100_verify(priv
);
1040 IPW_DEBUG_ERROR("%s: ipw2100_verify failed: %d\n",
1041 priv
->net_dev
->name
, err
);
1046 write_nic_dword(priv
->net_dev
,
1047 IPW_INTERNAL_REGISTER_HALT_AND_RESET
, 0x80000000);
1049 /* allow ARC to run */
1050 write_register(priv
->net_dev
, IPW_REG_RESET_REG
, 0);
1052 /* load microcode */
1053 err
= ipw2100_ucode_download(priv
, &ipw2100_firmware
);
1055 printk(KERN_ERR DRV_NAME
": %s: Error loading microcode: %d\n",
1056 priv
->net_dev
->name
, err
);
1061 write_nic_dword(priv
->net_dev
,
1062 IPW_INTERNAL_REGISTER_HALT_AND_RESET
, 0x00000000);
1064 /* s/w reset and clock stabilization (again!!!) */
1065 err
= sw_reset_and_clock(priv
);
1067 printk(KERN_ERR DRV_NAME
1068 ": %s: sw_reset_and_clock failed: %d\n",
1069 priv
->net_dev
->name
, err
);
1074 err
= ipw2100_fw_download(priv
, &ipw2100_firmware
);
1076 IPW_DEBUG_ERROR("%s: Error loading firmware: %d\n",
1077 priv
->net_dev
->name
, err
);
1082 * When the .resume method of the driver is called, the other
1083 * part of the system, i.e. the ide driver could still stay in
1084 * the suspend stage. This prevents us from loading the firmware
1085 * from the disk. --YZ
1088 /* free any storage allocated for firmware image */
1089 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
1092 /* zero out Domain 1 area indirectly (Si requirement) */
1093 for (address
= IPW_HOST_FW_SHARED_AREA0
;
1094 address
< IPW_HOST_FW_SHARED_AREA0_END
; address
+= 4)
1095 write_nic_dword(priv
->net_dev
, address
, 0);
1096 for (address
= IPW_HOST_FW_SHARED_AREA1
;
1097 address
< IPW_HOST_FW_SHARED_AREA1_END
; address
+= 4)
1098 write_nic_dword(priv
->net_dev
, address
, 0);
1099 for (address
= IPW_HOST_FW_SHARED_AREA2
;
1100 address
< IPW_HOST_FW_SHARED_AREA2_END
; address
+= 4)
1101 write_nic_dword(priv
->net_dev
, address
, 0);
1102 for (address
= IPW_HOST_FW_SHARED_AREA3
;
1103 address
< IPW_HOST_FW_SHARED_AREA3_END
; address
+= 4)
1104 write_nic_dword(priv
->net_dev
, address
, 0);
1105 for (address
= IPW_HOST_FW_INTERRUPT_AREA
;
1106 address
< IPW_HOST_FW_INTERRUPT_AREA_END
; address
+= 4)
1107 write_nic_dword(priv
->net_dev
, address
, 0);
1112 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
1116 static inline void ipw2100_enable_interrupts(struct ipw2100_priv
*priv
)
1118 if (priv
->status
& STATUS_INT_ENABLED
)
1120 priv
->status
|= STATUS_INT_ENABLED
;
1121 write_register(priv
->net_dev
, IPW_REG_INTA_MASK
, IPW_INTERRUPT_MASK
);
1124 static inline void ipw2100_disable_interrupts(struct ipw2100_priv
*priv
)
1126 if (!(priv
->status
& STATUS_INT_ENABLED
))
1128 priv
->status
&= ~STATUS_INT_ENABLED
;
1129 write_register(priv
->net_dev
, IPW_REG_INTA_MASK
, 0x0);
1132 static void ipw2100_initialize_ordinals(struct ipw2100_priv
*priv
)
1134 struct ipw2100_ordinals
*ord
= &priv
->ordinals
;
1136 IPW_DEBUG_INFO("enter\n");
1138 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_1
,
1141 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_2
,
1144 read_nic_dword(priv
->net_dev
, ord
->table1_addr
, &ord
->table1_size
);
1145 read_nic_dword(priv
->net_dev
, ord
->table2_addr
, &ord
->table2_size
);
1147 ord
->table2_size
&= 0x0000FFFF;
1149 IPW_DEBUG_INFO("table 1 size: %d\n", ord
->table1_size
);
1150 IPW_DEBUG_INFO("table 2 size: %d\n", ord
->table2_size
);
1151 IPW_DEBUG_INFO("exit\n");
1154 static inline void ipw2100_hw_set_gpio(struct ipw2100_priv
*priv
)
1158 * Set GPIO 3 writable by FW; GPIO 1 writable
1159 * by driver and enable clock
1161 reg
= (IPW_BIT_GPIO_GPIO3_MASK
| IPW_BIT_GPIO_GPIO1_ENABLE
|
1162 IPW_BIT_GPIO_LED_OFF
);
1163 write_register(priv
->net_dev
, IPW_REG_GPIO
, reg
);
1166 static int rf_kill_active(struct ipw2100_priv
*priv
)
1168 #define MAX_RF_KILL_CHECKS 5
1169 #define RF_KILL_CHECK_DELAY 40
1171 unsigned short value
= 0;
1175 if (!(priv
->hw_features
& HW_FEATURE_RFKILL
)) {
1176 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, false);
1177 priv
->status
&= ~STATUS_RF_KILL_HW
;
1181 for (i
= 0; i
< MAX_RF_KILL_CHECKS
; i
++) {
1182 udelay(RF_KILL_CHECK_DELAY
);
1183 read_register(priv
->net_dev
, IPW_REG_GPIO
, ®
);
1184 value
= (value
<< 1) | ((reg
& IPW_BIT_GPIO_RF_KILL
) ? 0 : 1);
1188 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, true);
1189 priv
->status
|= STATUS_RF_KILL_HW
;
1191 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, false);
1192 priv
->status
&= ~STATUS_RF_KILL_HW
;
1195 return (value
== 0);
1198 static int ipw2100_get_hw_features(struct ipw2100_priv
*priv
)
1204 * EEPROM_SRAM_DB_START_ADDRESS using ordinal in ordinal table 1
1207 if (ipw2100_get_ordinal
1208 (priv
, IPW_ORD_EEPROM_SRAM_DB_BLOCK_START_ADDRESS
, &addr
, &len
)) {
1209 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1214 IPW_DEBUG_INFO("EEPROM address: %08X\n", addr
);
1217 * EEPROM version is the byte at offset 0xfd in firmware
1218 * We read 4 bytes, then shift out the byte we actually want */
1219 read_nic_dword(priv
->net_dev
, addr
+ 0xFC, &val
);
1220 priv
->eeprom_version
= (val
>> 24) & 0xFF;
1221 IPW_DEBUG_INFO("EEPROM version: %d\n", priv
->eeprom_version
);
1224 * HW RF Kill enable is bit 0 in byte at offset 0x21 in firmware
1226 * notice that the EEPROM bit is reverse polarity, i.e.
1227 * bit = 0 signifies HW RF kill switch is supported
1228 * bit = 1 signifies HW RF kill switch is NOT supported
1230 read_nic_dword(priv
->net_dev
, addr
+ 0x20, &val
);
1231 if (!((val
>> 24) & 0x01))
1232 priv
->hw_features
|= HW_FEATURE_RFKILL
;
1234 IPW_DEBUG_INFO("HW RF Kill: %ssupported.\n",
1235 (priv
->hw_features
& HW_FEATURE_RFKILL
) ? "" : "not ");
1241 * Start firmware execution after power on and intialization
1244 * 2. Wait for f/w initialization completes;
1246 static int ipw2100_start_adapter(struct ipw2100_priv
*priv
)
1249 u32 inta
, inta_mask
, gpio
;
1251 IPW_DEBUG_INFO("enter\n");
1253 if (priv
->status
& STATUS_RUNNING
)
1257 * Initialize the hw - drive adapter to DO state by setting
1258 * init_done bit. Wait for clk_ready bit and Download
1261 if (ipw2100_download_firmware(priv
)) {
1262 printk(KERN_ERR DRV_NAME
1263 ": %s: Failed to power on the adapter.\n",
1264 priv
->net_dev
->name
);
1268 /* Clear the Tx, Rx and Msg queues and the r/w indexes
1269 * in the firmware RBD and TBD ring queue */
1270 ipw2100_queues_initialize(priv
);
1272 ipw2100_hw_set_gpio(priv
);
1274 /* TODO -- Look at disabling interrupts here to make sure none
1275 * get fired during FW initialization */
1277 /* Release ARC - clear reset bit */
1278 write_register(priv
->net_dev
, IPW_REG_RESET_REG
, 0);
1280 /* wait for f/w intialization complete */
1281 IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n");
1284 schedule_timeout_uninterruptible(msecs_to_jiffies(40));
1285 /* Todo... wait for sync command ... */
1287 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
1289 /* check "init done" bit */
1290 if (inta
& IPW2100_INTA_FW_INIT_DONE
) {
1291 /* reset "init done" bit */
1292 write_register(priv
->net_dev
, IPW_REG_INTA
,
1293 IPW2100_INTA_FW_INIT_DONE
);
1297 /* check error conditions : we check these after the firmware
1298 * check so that if there is an error, the interrupt handler
1299 * will see it and the adapter will be reset */
1301 (IPW2100_INTA_FATAL_ERROR
| IPW2100_INTA_PARITY_ERROR
)) {
1302 /* clear error conditions */
1303 write_register(priv
->net_dev
, IPW_REG_INTA
,
1304 IPW2100_INTA_FATAL_ERROR
|
1305 IPW2100_INTA_PARITY_ERROR
);
1309 /* Clear out any pending INTAs since we aren't supposed to have
1310 * interrupts enabled at this point... */
1311 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
1312 read_register(priv
->net_dev
, IPW_REG_INTA_MASK
, &inta_mask
);
1313 inta
&= IPW_INTERRUPT_MASK
;
1314 /* Clear out any pending interrupts */
1315 if (inta
& inta_mask
)
1316 write_register(priv
->net_dev
, IPW_REG_INTA
, inta
);
1318 IPW_DEBUG_FW("f/w initialization complete: %s\n",
1319 i
? "SUCCESS" : "FAILED");
1322 printk(KERN_WARNING DRV_NAME
1323 ": %s: Firmware did not initialize.\n",
1324 priv
->net_dev
->name
);
1328 /* allow firmware to write to GPIO1 & GPIO3 */
1329 read_register(priv
->net_dev
, IPW_REG_GPIO
, &gpio
);
1331 gpio
|= (IPW_BIT_GPIO_GPIO1_MASK
| IPW_BIT_GPIO_GPIO3_MASK
);
1333 write_register(priv
->net_dev
, IPW_REG_GPIO
, gpio
);
1335 /* Ready to receive commands */
1336 priv
->status
|= STATUS_RUNNING
;
1338 /* The adapter has been reset; we are not associated */
1339 priv
->status
&= ~(STATUS_ASSOCIATING
| STATUS_ASSOCIATED
);
1341 IPW_DEBUG_INFO("exit\n");
1346 static inline void ipw2100_reset_fatalerror(struct ipw2100_priv
*priv
)
1348 if (!priv
->fatal_error
)
1351 priv
->fatal_errors
[priv
->fatal_index
++] = priv
->fatal_error
;
1352 priv
->fatal_index
%= IPW2100_ERROR_QUEUE
;
1353 priv
->fatal_error
= 0;
1356 /* NOTE: Our interrupt is disabled when this method is called */
1357 static int ipw2100_power_cycle_adapter(struct ipw2100_priv
*priv
)
1362 IPW_DEBUG_INFO("Power cycling the hardware.\n");
1364 ipw2100_hw_set_gpio(priv
);
1366 /* Step 1. Stop Master Assert */
1367 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1368 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
1370 /* Step 2. Wait for stop Master Assert
1371 * (not more than 50us, otherwise ret error */
1374 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY
);
1375 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
1377 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
1381 priv
->status
&= ~STATUS_RESET_PENDING
;
1385 ("exit - waited too long for master assert stop\n");
1389 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1390 IPW_AUX_HOST_RESET_REG_SW_RESET
);
1392 /* Reset any fatal_error conditions */
1393 ipw2100_reset_fatalerror(priv
);
1395 /* At this point, the adapter is now stopped and disabled */
1396 priv
->status
&= ~(STATUS_RUNNING
| STATUS_ASSOCIATING
|
1397 STATUS_ASSOCIATED
| STATUS_ENABLED
);
1403 * Send the CARD_DISABLE_PHY_OFF command to the card to disable it
1405 * After disabling, if the card was associated, a STATUS_ASSN_LOST will be sent.
1407 * STATUS_CARD_DISABLE_NOTIFICATION will be sent regardless of
1408 * if STATUS_ASSN_LOST is sent.
1410 static int ipw2100_hw_phy_off(struct ipw2100_priv
*priv
)
1413 #define HW_PHY_OFF_LOOP_DELAY (HZ / 5000)
1415 struct host_command cmd
= {
1416 .host_command
= CARD_DISABLE_PHY_OFF
,
1417 .host_command_sequence
= 0,
1418 .host_command_length
= 0,
1423 IPW_DEBUG_HC("CARD_DISABLE_PHY_OFF\n");
1425 /* Turn off the radio */
1426 err
= ipw2100_hw_send_command(priv
, &cmd
);
1430 for (i
= 0; i
< 2500; i
++) {
1431 read_nic_dword(priv
->net_dev
, IPW2100_CONTROL_REG
, &val1
);
1432 read_nic_dword(priv
->net_dev
, IPW2100_COMMAND
, &val2
);
1434 if ((val1
& IPW2100_CONTROL_PHY_OFF
) &&
1435 (val2
& IPW2100_COMMAND_PHY_OFF
))
1438 schedule_timeout_uninterruptible(HW_PHY_OFF_LOOP_DELAY
);
1444 static int ipw2100_enable_adapter(struct ipw2100_priv
*priv
)
1446 struct host_command cmd
= {
1447 .host_command
= HOST_COMPLETE
,
1448 .host_command_sequence
= 0,
1449 .host_command_length
= 0
1453 IPW_DEBUG_HC("HOST_COMPLETE\n");
1455 if (priv
->status
& STATUS_ENABLED
)
1458 mutex_lock(&priv
->adapter_mutex
);
1460 if (rf_kill_active(priv
)) {
1461 IPW_DEBUG_HC("Command aborted due to RF kill active.\n");
1465 err
= ipw2100_hw_send_command(priv
, &cmd
);
1467 IPW_DEBUG_INFO("Failed to send HOST_COMPLETE command\n");
1471 err
= ipw2100_wait_for_card_state(priv
, IPW_HW_STATE_ENABLED
);
1473 IPW_DEBUG_INFO("%s: card not responding to init command.\n",
1474 priv
->net_dev
->name
);
1478 if (priv
->stop_hang_check
) {
1479 priv
->stop_hang_check
= 0;
1480 schedule_delayed_work(&priv
->hang_check
, HZ
/ 2);
1484 mutex_unlock(&priv
->adapter_mutex
);
1488 static int ipw2100_hw_stop_adapter(struct ipw2100_priv
*priv
)
1490 #define HW_POWER_DOWN_DELAY (msecs_to_jiffies(100))
1492 struct host_command cmd
= {
1493 .host_command
= HOST_PRE_POWER_DOWN
,
1494 .host_command_sequence
= 0,
1495 .host_command_length
= 0,
1500 if (!(priv
->status
& STATUS_RUNNING
))
1503 priv
->status
|= STATUS_STOPPING
;
1505 /* We can only shut down the card if the firmware is operational. So,
1506 * if we haven't reset since a fatal_error, then we can not send the
1507 * shutdown commands. */
1508 if (!priv
->fatal_error
) {
1509 /* First, make sure the adapter is enabled so that the PHY_OFF
1510 * command can shut it down */
1511 ipw2100_enable_adapter(priv
);
1513 err
= ipw2100_hw_phy_off(priv
);
1515 printk(KERN_WARNING DRV_NAME
1516 ": Error disabling radio %d\n", err
);
1519 * If in D0-standby mode going directly to D3 may cause a
1520 * PCI bus violation. Therefore we must change out of the D0
1523 * Sending the PREPARE_FOR_POWER_DOWN will restrict the
1524 * hardware from going into standby mode and will transition
1525 * out of D0-standby if it is already in that state.
1527 * STATUS_PREPARE_POWER_DOWN_COMPLETE will be sent by the
1528 * driver upon completion. Once received, the driver can
1529 * proceed to the D3 state.
1531 * Prepare for power down command to fw. This command would
1532 * take HW out of D0-standby and prepare it for D3 state.
1534 * Currently FW does not support event notification for this
1535 * event. Therefore, skip waiting for it. Just wait a fixed
1538 IPW_DEBUG_HC("HOST_PRE_POWER_DOWN\n");
1540 err
= ipw2100_hw_send_command(priv
, &cmd
);
1542 printk(KERN_WARNING DRV_NAME
": "
1543 "%s: Power down command failed: Error %d\n",
1544 priv
->net_dev
->name
, err
);
1546 schedule_timeout_uninterruptible(HW_POWER_DOWN_DELAY
);
1549 priv
->status
&= ~STATUS_ENABLED
;
1552 * Set GPIO 3 writable by FW; GPIO 1 writable
1553 * by driver and enable clock
1555 ipw2100_hw_set_gpio(priv
);
1558 * Power down adapter. Sequence:
1559 * 1. Stop master assert (RESET_REG[9]=1)
1560 * 2. Wait for stop master (RESET_REG[8]==1)
1561 * 3. S/w reset assert (RESET_REG[7] = 1)
1564 /* Stop master assert */
1565 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1566 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
1568 /* wait stop master not more than 50 usec.
1569 * Otherwise return error. */
1570 for (i
= 5; i
> 0; i
--) {
1573 /* Check master stop bit */
1574 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
1576 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
1581 printk(KERN_WARNING DRV_NAME
1582 ": %s: Could now power down adapter.\n",
1583 priv
->net_dev
->name
);
1585 /* assert s/w reset */
1586 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1587 IPW_AUX_HOST_RESET_REG_SW_RESET
);
1589 priv
->status
&= ~(STATUS_RUNNING
| STATUS_STOPPING
);
1594 static int ipw2100_disable_adapter(struct ipw2100_priv
*priv
)
1596 struct host_command cmd
= {
1597 .host_command
= CARD_DISABLE
,
1598 .host_command_sequence
= 0,
1599 .host_command_length
= 0
1603 IPW_DEBUG_HC("CARD_DISABLE\n");
1605 if (!(priv
->status
& STATUS_ENABLED
))
1608 /* Make sure we clear the associated state */
1609 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1611 if (!priv
->stop_hang_check
) {
1612 priv
->stop_hang_check
= 1;
1613 cancel_delayed_work(&priv
->hang_check
);
1616 mutex_lock(&priv
->adapter_mutex
);
1618 err
= ipw2100_hw_send_command(priv
, &cmd
);
1620 printk(KERN_WARNING DRV_NAME
1621 ": exit - failed to send CARD_DISABLE command\n");
1625 err
= ipw2100_wait_for_card_state(priv
, IPW_HW_STATE_DISABLED
);
1627 printk(KERN_WARNING DRV_NAME
1628 ": exit - card failed to change to DISABLED\n");
1632 IPW_DEBUG_INFO("TODO: implement scan state machine\n");
1635 mutex_unlock(&priv
->adapter_mutex
);
1639 static int ipw2100_set_scan_options(struct ipw2100_priv
*priv
)
1641 struct host_command cmd
= {
1642 .host_command
= SET_SCAN_OPTIONS
,
1643 .host_command_sequence
= 0,
1644 .host_command_length
= 8
1648 IPW_DEBUG_INFO("enter\n");
1650 IPW_DEBUG_SCAN("setting scan options\n");
1652 cmd
.host_command_parameters
[0] = 0;
1654 if (!(priv
->config
& CFG_ASSOCIATE
))
1655 cmd
.host_command_parameters
[0] |= IPW_SCAN_NOASSOCIATE
;
1656 if ((priv
->ieee
->sec
.flags
& SEC_ENABLED
) && priv
->ieee
->sec
.enabled
)
1657 cmd
.host_command_parameters
[0] |= IPW_SCAN_MIXED_CELL
;
1658 if (priv
->config
& CFG_PASSIVE_SCAN
)
1659 cmd
.host_command_parameters
[0] |= IPW_SCAN_PASSIVE
;
1661 cmd
.host_command_parameters
[1] = priv
->channel_mask
;
1663 err
= ipw2100_hw_send_command(priv
, &cmd
);
1665 IPW_DEBUG_HC("SET_SCAN_OPTIONS 0x%04X\n",
1666 cmd
.host_command_parameters
[0]);
1671 static int ipw2100_start_scan(struct ipw2100_priv
*priv
)
1673 struct host_command cmd
= {
1674 .host_command
= BROADCAST_SCAN
,
1675 .host_command_sequence
= 0,
1676 .host_command_length
= 4
1680 IPW_DEBUG_HC("START_SCAN\n");
1682 cmd
.host_command_parameters
[0] = 0;
1684 /* No scanning if in monitor mode */
1685 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
1688 if (priv
->status
& STATUS_SCANNING
) {
1689 IPW_DEBUG_SCAN("Scan requested while already in scan...\n");
1693 IPW_DEBUG_INFO("enter\n");
1695 /* Not clearing here; doing so makes iwlist always return nothing...
1697 * We should modify the table logic to use aging tables vs. clearing
1698 * the table on each scan start.
1700 IPW_DEBUG_SCAN("starting scan\n");
1702 priv
->status
|= STATUS_SCANNING
;
1703 err
= ipw2100_hw_send_command(priv
, &cmd
);
1705 priv
->status
&= ~STATUS_SCANNING
;
1707 IPW_DEBUG_INFO("exit\n");
1712 static const struct libipw_geo ipw_geos
[] = {
1716 .bg
= {{2412, 1}, {2417, 2}, {2422, 3},
1717 {2427, 4}, {2432, 5}, {2437, 6},
1718 {2442, 7}, {2447, 8}, {2452, 9},
1719 {2457, 10}, {2462, 11}, {2467, 12},
1720 {2472, 13}, {2484, 14}},
1724 static int ipw2100_up(struct ipw2100_priv
*priv
, int deferred
)
1726 unsigned long flags
;
1729 u32 ord_len
= sizeof(lock
);
1731 /* Age scan list entries found before suspend */
1732 if (priv
->suspend_time
) {
1733 libipw_networks_age(priv
->ieee
, priv
->suspend_time
);
1734 priv
->suspend_time
= 0;
1737 /* Quiet if manually disabled. */
1738 if (priv
->status
& STATUS_RF_KILL_SW
) {
1739 IPW_DEBUG_INFO("%s: Radio is disabled by Manual Disable "
1740 "switch\n", priv
->net_dev
->name
);
1744 /* the ipw2100 hardware really doesn't want power management delays
1745 * longer than 175usec
1747 pm_qos_update_request(&ipw2100_pm_qos_req
, 175);
1749 /* If the interrupt is enabled, turn it off... */
1750 spin_lock_irqsave(&priv
->low_lock
, flags
);
1751 ipw2100_disable_interrupts(priv
);
1753 /* Reset any fatal_error conditions */
1754 ipw2100_reset_fatalerror(priv
);
1755 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1757 if (priv
->status
& STATUS_POWERED
||
1758 (priv
->status
& STATUS_RESET_PENDING
)) {
1759 /* Power cycle the card ... */
1760 if (ipw2100_power_cycle_adapter(priv
)) {
1761 printk(KERN_WARNING DRV_NAME
1762 ": %s: Could not cycle adapter.\n",
1763 priv
->net_dev
->name
);
1768 priv
->status
|= STATUS_POWERED
;
1770 /* Load the firmware, start the clocks, etc. */
1771 if (ipw2100_start_adapter(priv
)) {
1772 printk(KERN_ERR DRV_NAME
1773 ": %s: Failed to start the firmware.\n",
1774 priv
->net_dev
->name
);
1779 ipw2100_initialize_ordinals(priv
);
1781 /* Determine capabilities of this particular HW configuration */
1782 if (ipw2100_get_hw_features(priv
)) {
1783 printk(KERN_ERR DRV_NAME
1784 ": %s: Failed to determine HW features.\n",
1785 priv
->net_dev
->name
);
1790 /* Initialize the geo */
1791 if (libipw_set_geo(priv
->ieee
, &ipw_geos
[0])) {
1792 printk(KERN_WARNING DRV_NAME
"Could not set geo\n");
1795 priv
->ieee
->freq_band
= LIBIPW_24GHZ_BAND
;
1798 if (ipw2100_set_ordinal(priv
, IPW_ORD_PERS_DB_LOCK
, &lock
, &ord_len
)) {
1799 printk(KERN_ERR DRV_NAME
1800 ": %s: Failed to clear ordinal lock.\n",
1801 priv
->net_dev
->name
);
1806 priv
->status
&= ~STATUS_SCANNING
;
1808 if (rf_kill_active(priv
)) {
1809 printk(KERN_INFO
"%s: Radio is disabled by RF switch.\n",
1810 priv
->net_dev
->name
);
1812 if (priv
->stop_rf_kill
) {
1813 priv
->stop_rf_kill
= 0;
1814 schedule_delayed_work(&priv
->rf_kill
,
1815 round_jiffies_relative(HZ
));
1821 /* Turn on the interrupt so that commands can be processed */
1822 ipw2100_enable_interrupts(priv
);
1824 /* Send all of the commands that must be sent prior to
1826 if (ipw2100_adapter_setup(priv
)) {
1827 printk(KERN_ERR DRV_NAME
": %s: Failed to start the card.\n",
1828 priv
->net_dev
->name
);
1834 /* Enable the adapter - sends HOST_COMPLETE */
1835 if (ipw2100_enable_adapter(priv
)) {
1836 printk(KERN_ERR DRV_NAME
": "
1837 "%s: failed in call to enable adapter.\n",
1838 priv
->net_dev
->name
);
1839 ipw2100_hw_stop_adapter(priv
);
1844 /* Start a scan . . . */
1845 ipw2100_set_scan_options(priv
);
1846 ipw2100_start_scan(priv
);
1853 static void ipw2100_down(struct ipw2100_priv
*priv
)
1855 unsigned long flags
;
1856 union iwreq_data wrqu
= {
1858 .sa_family
= ARPHRD_ETHER
}
1860 int associated
= priv
->status
& STATUS_ASSOCIATED
;
1862 /* Kill the RF switch timer */
1863 if (!priv
->stop_rf_kill
) {
1864 priv
->stop_rf_kill
= 1;
1865 cancel_delayed_work(&priv
->rf_kill
);
1868 /* Kill the firmware hang check timer */
1869 if (!priv
->stop_hang_check
) {
1870 priv
->stop_hang_check
= 1;
1871 cancel_delayed_work(&priv
->hang_check
);
1874 /* Kill any pending resets */
1875 if (priv
->status
& STATUS_RESET_PENDING
)
1876 cancel_delayed_work(&priv
->reset_work
);
1878 /* Make sure the interrupt is on so that FW commands will be
1879 * processed correctly */
1880 spin_lock_irqsave(&priv
->low_lock
, flags
);
1881 ipw2100_enable_interrupts(priv
);
1882 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1884 if (ipw2100_hw_stop_adapter(priv
))
1885 printk(KERN_ERR DRV_NAME
": %s: Error stopping adapter.\n",
1886 priv
->net_dev
->name
);
1888 /* Do not disable the interrupt until _after_ we disable
1889 * the adaptor. Otherwise the CARD_DISABLE command will never
1890 * be ack'd by the firmware */
1891 spin_lock_irqsave(&priv
->low_lock
, flags
);
1892 ipw2100_disable_interrupts(priv
);
1893 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1895 pm_qos_update_request(&ipw2100_pm_qos_req
, PM_QOS_DEFAULT_VALUE
);
1897 /* We have to signal any supplicant if we are disassociating */
1899 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
1901 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1902 netif_carrier_off(priv
->net_dev
);
1903 netif_stop_queue(priv
->net_dev
);
1906 static int ipw2100_wdev_init(struct net_device
*dev
)
1908 struct ipw2100_priv
*priv
= libipw_priv(dev
);
1909 const struct libipw_geo
*geo
= libipw_get_geo(priv
->ieee
);
1910 struct wireless_dev
*wdev
= &priv
->ieee
->wdev
;
1913 memcpy(wdev
->wiphy
->perm_addr
, priv
->mac_addr
, ETH_ALEN
);
1915 /* fill-out priv->ieee->bg_band */
1916 if (geo
->bg_channels
) {
1917 struct ieee80211_supported_band
*bg_band
= &priv
->ieee
->bg_band
;
1919 bg_band
->band
= IEEE80211_BAND_2GHZ
;
1920 bg_band
->n_channels
= geo
->bg_channels
;
1921 bg_band
->channels
= kcalloc(geo
->bg_channels
,
1922 sizeof(struct ieee80211_channel
),
1924 if (!bg_band
->channels
) {
1928 /* translate geo->bg to bg_band.channels */
1929 for (i
= 0; i
< geo
->bg_channels
; i
++) {
1930 bg_band
->channels
[i
].band
= IEEE80211_BAND_2GHZ
;
1931 bg_band
->channels
[i
].center_freq
= geo
->bg
[i
].freq
;
1932 bg_band
->channels
[i
].hw_value
= geo
->bg
[i
].channel
;
1933 bg_band
->channels
[i
].max_power
= geo
->bg
[i
].max_power
;
1934 if (geo
->bg
[i
].flags
& LIBIPW_CH_PASSIVE_ONLY
)
1935 bg_band
->channels
[i
].flags
|=
1936 IEEE80211_CHAN_PASSIVE_SCAN
;
1937 if (geo
->bg
[i
].flags
& LIBIPW_CH_NO_IBSS
)
1938 bg_band
->channels
[i
].flags
|=
1939 IEEE80211_CHAN_NO_IBSS
;
1940 if (geo
->bg
[i
].flags
& LIBIPW_CH_RADAR_DETECT
)
1941 bg_band
->channels
[i
].flags
|=
1942 IEEE80211_CHAN_RADAR
;
1943 /* No equivalent for LIBIPW_CH_80211H_RULES,
1944 LIBIPW_CH_UNIFORM_SPREADING, or
1945 LIBIPW_CH_B_ONLY... */
1947 /* point at bitrate info */
1948 bg_band
->bitrates
= ipw2100_bg_rates
;
1949 bg_band
->n_bitrates
= RATE_COUNT
;
1951 wdev
->wiphy
->bands
[IEEE80211_BAND_2GHZ
] = bg_band
;
1954 wdev
->wiphy
->cipher_suites
= ipw_cipher_suites
;
1955 wdev
->wiphy
->n_cipher_suites
= ARRAY_SIZE(ipw_cipher_suites
);
1957 set_wiphy_dev(wdev
->wiphy
, &priv
->pci_dev
->dev
);
1958 if (wiphy_register(wdev
->wiphy
))
1963 static void ipw2100_reset_adapter(struct work_struct
*work
)
1965 struct ipw2100_priv
*priv
=
1966 container_of(work
, struct ipw2100_priv
, reset_work
.work
);
1967 unsigned long flags
;
1968 union iwreq_data wrqu
= {
1970 .sa_family
= ARPHRD_ETHER
}
1972 int associated
= priv
->status
& STATUS_ASSOCIATED
;
1974 spin_lock_irqsave(&priv
->low_lock
, flags
);
1975 IPW_DEBUG_INFO(": %s: Restarting adapter.\n", priv
->net_dev
->name
);
1977 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1978 priv
->status
|= STATUS_SECURITY_UPDATED
;
1980 /* Force a power cycle even if interface hasn't been opened
1982 cancel_delayed_work(&priv
->reset_work
);
1983 priv
->status
|= STATUS_RESET_PENDING
;
1984 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1986 mutex_lock(&priv
->action_mutex
);
1987 /* stop timed checks so that they don't interfere with reset */
1988 priv
->stop_hang_check
= 1;
1989 cancel_delayed_work(&priv
->hang_check
);
1991 /* We have to signal any supplicant if we are disassociating */
1993 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
1995 ipw2100_up(priv
, 0);
1996 mutex_unlock(&priv
->action_mutex
);
2000 static void isr_indicate_associated(struct ipw2100_priv
*priv
, u32 status
)
2003 #define MAC_ASSOCIATION_READ_DELAY (HZ)
2005 unsigned int len
, essid_len
;
2006 char essid
[IW_ESSID_MAX_SIZE
];
2011 DECLARE_SSID_BUF(ssid
);
2014 * TBD: BSSID is usually 00:00:00:00:00:00 here and not
2015 * an actual MAC of the AP. Seems like FW sets this
2016 * address too late. Read it later and expose through
2017 * /proc or schedule a later task to query and update
2020 essid_len
= IW_ESSID_MAX_SIZE
;
2021 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_SSID
,
2024 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2030 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_CURRENT_TX_RATE
, &txrate
, &len
);
2032 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2038 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_OUR_FREQ
, &chan
, &len
);
2040 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2045 ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
, &bssid
, &len
);
2047 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2051 memcpy(priv
->ieee
->bssid
, bssid
, ETH_ALEN
);
2054 case TX_RATE_1_MBIT
:
2055 txratename
= "1Mbps";
2057 case TX_RATE_2_MBIT
:
2058 txratename
= "2Mbsp";
2060 case TX_RATE_5_5_MBIT
:
2061 txratename
= "5.5Mbps";
2063 case TX_RATE_11_MBIT
:
2064 txratename
= "11Mbps";
2067 IPW_DEBUG_INFO("Unknown rate: %d\n", txrate
);
2068 txratename
= "unknown rate";
2072 IPW_DEBUG_INFO("%s: Associated with '%s' at %s, channel %d (BSSID=%pM)\n",
2073 priv
->net_dev
->name
, print_ssid(ssid
, essid
, essid_len
),
2074 txratename
, chan
, bssid
);
2076 /* now we copy read ssid into dev */
2077 if (!(priv
->config
& CFG_STATIC_ESSID
)) {
2078 priv
->essid_len
= min((u8
) essid_len
, (u8
) IW_ESSID_MAX_SIZE
);
2079 memcpy(priv
->essid
, essid
, priv
->essid_len
);
2081 priv
->channel
= chan
;
2082 memcpy(priv
->bssid
, bssid
, ETH_ALEN
);
2084 priv
->status
|= STATUS_ASSOCIATING
;
2085 priv
->connect_start
= get_seconds();
2087 schedule_delayed_work(&priv
->wx_event_work
, HZ
/ 10);
2090 static int ipw2100_set_essid(struct ipw2100_priv
*priv
, char *essid
,
2091 int length
, int batch_mode
)
2093 int ssid_len
= min(length
, IW_ESSID_MAX_SIZE
);
2094 struct host_command cmd
= {
2095 .host_command
= SSID
,
2096 .host_command_sequence
= 0,
2097 .host_command_length
= ssid_len
2100 DECLARE_SSID_BUF(ssid
);
2102 IPW_DEBUG_HC("SSID: '%s'\n", print_ssid(ssid
, essid
, ssid_len
));
2105 memcpy(cmd
.host_command_parameters
, essid
, ssid_len
);
2108 err
= ipw2100_disable_adapter(priv
);
2113 /* Bug in FW currently doesn't honor bit 0 in SET_SCAN_OPTIONS to
2114 * disable auto association -- so we cheat by setting a bogus SSID */
2115 if (!ssid_len
&& !(priv
->config
& CFG_ASSOCIATE
)) {
2117 u8
*bogus
= (u8
*) cmd
.host_command_parameters
;
2118 for (i
= 0; i
< IW_ESSID_MAX_SIZE
; i
++)
2119 bogus
[i
] = 0x18 + i
;
2120 cmd
.host_command_length
= IW_ESSID_MAX_SIZE
;
2123 /* NOTE: We always send the SSID command even if the provided ESSID is
2124 * the same as what we currently think is set. */
2126 err
= ipw2100_hw_send_command(priv
, &cmd
);
2128 memset(priv
->essid
+ ssid_len
, 0, IW_ESSID_MAX_SIZE
- ssid_len
);
2129 memcpy(priv
->essid
, essid
, ssid_len
);
2130 priv
->essid_len
= ssid_len
;
2134 if (ipw2100_enable_adapter(priv
))
2141 static void isr_indicate_association_lost(struct ipw2100_priv
*priv
, u32 status
)
2143 DECLARE_SSID_BUF(ssid
);
2145 IPW_DEBUG(IPW_DL_NOTIF
| IPW_DL_STATE
| IPW_DL_ASSOC
,
2146 "disassociated: '%s' %pM\n",
2147 print_ssid(ssid
, priv
->essid
, priv
->essid_len
),
2150 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
2152 if (priv
->status
& STATUS_STOPPING
) {
2153 IPW_DEBUG_INFO("Card is stopping itself, discard ASSN_LOST.\n");
2157 memset(priv
->bssid
, 0, ETH_ALEN
);
2158 memset(priv
->ieee
->bssid
, 0, ETH_ALEN
);
2160 netif_carrier_off(priv
->net_dev
);
2161 netif_stop_queue(priv
->net_dev
);
2163 if (!(priv
->status
& STATUS_RUNNING
))
2166 if (priv
->status
& STATUS_SECURITY_UPDATED
)
2167 schedule_delayed_work(&priv
->security_work
, 0);
2169 schedule_delayed_work(&priv
->wx_event_work
, 0);
2172 static void isr_indicate_rf_kill(struct ipw2100_priv
*priv
, u32 status
)
2174 IPW_DEBUG_INFO("%s: RF Kill state changed to radio OFF.\n",
2175 priv
->net_dev
->name
);
2177 /* RF_KILL is now enabled (else we wouldn't be here) */
2178 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, true);
2179 priv
->status
|= STATUS_RF_KILL_HW
;
2181 /* Make sure the RF Kill check timer is running */
2182 priv
->stop_rf_kill
= 0;
2183 mod_delayed_work(system_wq
, &priv
->rf_kill
, round_jiffies_relative(HZ
));
2186 static void send_scan_event(void *data
)
2188 struct ipw2100_priv
*priv
= data
;
2189 union iwreq_data wrqu
;
2191 wrqu
.data
.length
= 0;
2192 wrqu
.data
.flags
= 0;
2193 wireless_send_event(priv
->net_dev
, SIOCGIWSCAN
, &wrqu
, NULL
);
2196 static void ipw2100_scan_event_later(struct work_struct
*work
)
2198 send_scan_event(container_of(work
, struct ipw2100_priv
,
2199 scan_event_later
.work
));
2202 static void ipw2100_scan_event_now(struct work_struct
*work
)
2204 send_scan_event(container_of(work
, struct ipw2100_priv
,
2208 static void isr_scan_complete(struct ipw2100_priv
*priv
, u32 status
)
2210 IPW_DEBUG_SCAN("scan complete\n");
2211 /* Age the scan results... */
2212 priv
->ieee
->scans
++;
2213 priv
->status
&= ~STATUS_SCANNING
;
2215 /* Only userspace-requested scan completion events go out immediately */
2216 if (!priv
->user_requested_scan
) {
2217 if (!delayed_work_pending(&priv
->scan_event_later
))
2218 schedule_delayed_work(&priv
->scan_event_later
,
2219 round_jiffies_relative(msecs_to_jiffies(4000)));
2221 priv
->user_requested_scan
= 0;
2222 cancel_delayed_work(&priv
->scan_event_later
);
2223 schedule_work(&priv
->scan_event_now
);
2227 #ifdef CONFIG_IPW2100_DEBUG
2228 #define IPW2100_HANDLER(v, f) { v, f, # v }
2229 struct ipw2100_status_indicator
{
2231 void (*cb
) (struct ipw2100_priv
* priv
, u32 status
);
2235 #define IPW2100_HANDLER(v, f) { v, f }
2236 struct ipw2100_status_indicator
{
2238 void (*cb
) (struct ipw2100_priv
* priv
, u32 status
);
2240 #endif /* CONFIG_IPW2100_DEBUG */
2242 static void isr_indicate_scanning(struct ipw2100_priv
*priv
, u32 status
)
2244 IPW_DEBUG_SCAN("Scanning...\n");
2245 priv
->status
|= STATUS_SCANNING
;
2248 static const struct ipw2100_status_indicator status_handlers
[] = {
2249 IPW2100_HANDLER(IPW_STATE_INITIALIZED
, NULL
),
2250 IPW2100_HANDLER(IPW_STATE_COUNTRY_FOUND
, NULL
),
2251 IPW2100_HANDLER(IPW_STATE_ASSOCIATED
, isr_indicate_associated
),
2252 IPW2100_HANDLER(IPW_STATE_ASSN_LOST
, isr_indicate_association_lost
),
2253 IPW2100_HANDLER(IPW_STATE_ASSN_CHANGED
, NULL
),
2254 IPW2100_HANDLER(IPW_STATE_SCAN_COMPLETE
, isr_scan_complete
),
2255 IPW2100_HANDLER(IPW_STATE_ENTERED_PSP
, NULL
),
2256 IPW2100_HANDLER(IPW_STATE_LEFT_PSP
, NULL
),
2257 IPW2100_HANDLER(IPW_STATE_RF_KILL
, isr_indicate_rf_kill
),
2258 IPW2100_HANDLER(IPW_STATE_DISABLED
, NULL
),
2259 IPW2100_HANDLER(IPW_STATE_POWER_DOWN
, NULL
),
2260 IPW2100_HANDLER(IPW_STATE_SCANNING
, isr_indicate_scanning
),
2261 IPW2100_HANDLER(-1, NULL
)
2264 static void isr_status_change(struct ipw2100_priv
*priv
, int status
)
2268 if (status
== IPW_STATE_SCANNING
&&
2269 priv
->status
& STATUS_ASSOCIATED
&&
2270 !(priv
->status
& STATUS_SCANNING
)) {
2271 IPW_DEBUG_INFO("Scan detected while associated, with "
2272 "no scan request. Restarting firmware.\n");
2274 /* Wake up any sleeping jobs */
2275 schedule_reset(priv
);
2278 for (i
= 0; status_handlers
[i
].status
!= -1; i
++) {
2279 if (status
== status_handlers
[i
].status
) {
2280 IPW_DEBUG_NOTIF("Status change: %s\n",
2281 status_handlers
[i
].name
);
2282 if (status_handlers
[i
].cb
)
2283 status_handlers
[i
].cb(priv
, status
);
2284 priv
->wstats
.status
= status
;
2289 IPW_DEBUG_NOTIF("unknown status received: %04x\n", status
);
2292 static void isr_rx_complete_command(struct ipw2100_priv
*priv
,
2293 struct ipw2100_cmd_header
*cmd
)
2295 #ifdef CONFIG_IPW2100_DEBUG
2296 if (cmd
->host_command_reg
< ARRAY_SIZE(command_types
)) {
2297 IPW_DEBUG_HC("Command completed '%s (%d)'\n",
2298 command_types
[cmd
->host_command_reg
],
2299 cmd
->host_command_reg
);
2302 if (cmd
->host_command_reg
== HOST_COMPLETE
)
2303 priv
->status
|= STATUS_ENABLED
;
2305 if (cmd
->host_command_reg
== CARD_DISABLE
)
2306 priv
->status
&= ~STATUS_ENABLED
;
2308 priv
->status
&= ~STATUS_CMD_ACTIVE
;
2310 wake_up_interruptible(&priv
->wait_command_queue
);
2313 #ifdef CONFIG_IPW2100_DEBUG
2314 static const char *frame_types
[] = {
2315 "COMMAND_STATUS_VAL",
2316 "STATUS_CHANGE_VAL",
2319 "HOST_NOTIFICATION_VAL"
2323 static int ipw2100_alloc_skb(struct ipw2100_priv
*priv
,
2324 struct ipw2100_rx_packet
*packet
)
2326 packet
->skb
= dev_alloc_skb(sizeof(struct ipw2100_rx
));
2330 packet
->rxp
= (struct ipw2100_rx
*)packet
->skb
->data
;
2331 packet
->dma_addr
= pci_map_single(priv
->pci_dev
, packet
->skb
->data
,
2332 sizeof(struct ipw2100_rx
),
2333 PCI_DMA_FROMDEVICE
);
2334 /* NOTE: pci_map_single does not return an error code, and 0 is a valid
2340 #define SEARCH_ERROR 0xffffffff
2341 #define SEARCH_FAIL 0xfffffffe
2342 #define SEARCH_SUCCESS 0xfffffff0
2343 #define SEARCH_DISCARD 0
2344 #define SEARCH_SNAPSHOT 1
2346 #define SNAPSHOT_ADDR(ofs) (priv->snapshot[((ofs) >> 12) & 0xff] + ((ofs) & 0xfff))
2347 static void ipw2100_snapshot_free(struct ipw2100_priv
*priv
)
2350 if (!priv
->snapshot
[0])
2352 for (i
= 0; i
< 0x30; i
++)
2353 kfree(priv
->snapshot
[i
]);
2354 priv
->snapshot
[0] = NULL
;
2357 #ifdef IPW2100_DEBUG_C3
2358 static int ipw2100_snapshot_alloc(struct ipw2100_priv
*priv
)
2361 if (priv
->snapshot
[0])
2363 for (i
= 0; i
< 0x30; i
++) {
2364 priv
->snapshot
[i
] = kmalloc(0x1000, GFP_ATOMIC
);
2365 if (!priv
->snapshot
[i
]) {
2366 IPW_DEBUG_INFO("%s: Error allocating snapshot "
2367 "buffer %d\n", priv
->net_dev
->name
, i
);
2369 kfree(priv
->snapshot
[--i
]);
2370 priv
->snapshot
[0] = NULL
;
2378 static u32
ipw2100_match_buf(struct ipw2100_priv
*priv
, u8
* in_buf
,
2379 size_t len
, int mode
)
2387 if (mode
== SEARCH_SNAPSHOT
) {
2388 if (!ipw2100_snapshot_alloc(priv
))
2389 mode
= SEARCH_DISCARD
;
2392 for (ret
= SEARCH_FAIL
, i
= 0; i
< 0x30000; i
+= 4) {
2393 read_nic_dword(priv
->net_dev
, i
, &tmp
);
2394 if (mode
== SEARCH_SNAPSHOT
)
2395 *(u32
*) SNAPSHOT_ADDR(i
) = tmp
;
2396 if (ret
== SEARCH_FAIL
) {
2398 for (j
= 0; j
< 4; j
++) {
2407 if ((s
- in_buf
) == len
)
2408 ret
= (i
+ j
) - len
+ 1;
2410 } else if (mode
== SEARCH_DISCARD
)
2420 * 0) Disconnect the SKB from the firmware (just unmap)
2421 * 1) Pack the ETH header into the SKB
2422 * 2) Pass the SKB to the network stack
2424 * When packet is provided by the firmware, it contains the following:
2429 * The size of the constructed ethernet
2432 #ifdef IPW2100_RX_DEBUG
2433 static u8 packet_data
[IPW_RX_NIC_BUFFER_LENGTH
];
2436 static void ipw2100_corruption_detected(struct ipw2100_priv
*priv
, int i
)
2438 #ifdef IPW2100_DEBUG_C3
2439 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2444 IPW_DEBUG_INFO(": PCI latency error detected at 0x%04zX.\n",
2445 i
* sizeof(struct ipw2100_status
));
2447 #ifdef IPW2100_DEBUG_C3
2448 /* Halt the firmware so we can get a good image */
2449 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
2450 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
2453 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY
);
2454 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
2456 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
2460 match
= ipw2100_match_buf(priv
, (u8
*) status
,
2461 sizeof(struct ipw2100_status
),
2463 if (match
< SEARCH_SUCCESS
)
2464 IPW_DEBUG_INFO("%s: DMA status match in Firmware at "
2465 "offset 0x%06X, length %d:\n",
2466 priv
->net_dev
->name
, match
,
2467 sizeof(struct ipw2100_status
));
2469 IPW_DEBUG_INFO("%s: No DMA status match in "
2470 "Firmware.\n", priv
->net_dev
->name
);
2472 printk_buf((u8
*) priv
->status_queue
.drv
,
2473 sizeof(struct ipw2100_status
) * RX_QUEUE_LENGTH
);
2476 priv
->fatal_error
= IPW2100_ERR_C3_CORRUPTION
;
2477 priv
->net_dev
->stats
.rx_errors
++;
2478 schedule_reset(priv
);
2481 static void isr_rx(struct ipw2100_priv
*priv
, int i
,
2482 struct libipw_rx_stats
*stats
)
2484 struct net_device
*dev
= priv
->net_dev
;
2485 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2486 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
2488 IPW_DEBUG_RX("Handler...\n");
2490 if (unlikely(status
->frame_size
> skb_tailroom(packet
->skb
))) {
2491 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2494 status
->frame_size
, skb_tailroom(packet
->skb
));
2495 dev
->stats
.rx_errors
++;
2499 if (unlikely(!netif_running(dev
))) {
2500 dev
->stats
.rx_errors
++;
2501 priv
->wstats
.discard
.misc
++;
2502 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2506 if (unlikely(priv
->ieee
->iw_mode
!= IW_MODE_MONITOR
&&
2507 !(priv
->status
& STATUS_ASSOCIATED
))) {
2508 IPW_DEBUG_DROP("Dropping packet while not associated.\n");
2509 priv
->wstats
.discard
.misc
++;
2513 pci_unmap_single(priv
->pci_dev
,
2515 sizeof(struct ipw2100_rx
), PCI_DMA_FROMDEVICE
);
2517 skb_put(packet
->skb
, status
->frame_size
);
2519 #ifdef IPW2100_RX_DEBUG
2520 /* Make a copy of the frame so we can dump it to the logs if
2521 * libipw_rx fails */
2522 skb_copy_from_linear_data(packet
->skb
, packet_data
,
2523 min_t(u32
, status
->frame_size
,
2524 IPW_RX_NIC_BUFFER_LENGTH
));
2527 if (!libipw_rx(priv
->ieee
, packet
->skb
, stats
)) {
2528 #ifdef IPW2100_RX_DEBUG
2529 IPW_DEBUG_DROP("%s: Non consumed packet:\n",
2531 printk_buf(IPW_DL_DROP
, packet_data
, status
->frame_size
);
2533 dev
->stats
.rx_errors
++;
2535 /* libipw_rx failed, so it didn't free the SKB */
2536 dev_kfree_skb_any(packet
->skb
);
2540 /* We need to allocate a new SKB and attach it to the RDB. */
2541 if (unlikely(ipw2100_alloc_skb(priv
, packet
))) {
2542 printk(KERN_WARNING DRV_NAME
": "
2543 "%s: Unable to allocate SKB onto RBD ring - disabling "
2544 "adapter.\n", dev
->name
);
2545 /* TODO: schedule adapter shutdown */
2546 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2549 /* Update the RDB entry */
2550 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
2553 #ifdef CONFIG_IPW2100_MONITOR
2555 static void isr_rx_monitor(struct ipw2100_priv
*priv
, int i
,
2556 struct libipw_rx_stats
*stats
)
2558 struct net_device
*dev
= priv
->net_dev
;
2559 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2560 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
2562 /* Magic struct that slots into the radiotap header -- no reason
2563 * to build this manually element by element, we can write it much
2564 * more efficiently than we can parse it. ORDER MATTERS HERE */
2566 struct ieee80211_radiotap_header rt_hdr
;
2567 s8 rt_dbmsignal
; /* signal in dbM, kluged to signed */
2570 IPW_DEBUG_RX("Handler...\n");
2572 if (unlikely(status
->frame_size
> skb_tailroom(packet
->skb
) -
2573 sizeof(struct ipw_rt_hdr
))) {
2574 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2578 skb_tailroom(packet
->skb
));
2579 dev
->stats
.rx_errors
++;
2583 if (unlikely(!netif_running(dev
))) {
2584 dev
->stats
.rx_errors
++;
2585 priv
->wstats
.discard
.misc
++;
2586 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2590 if (unlikely(priv
->config
& CFG_CRC_CHECK
&&
2591 status
->flags
& IPW_STATUS_FLAG_CRC_ERROR
)) {
2592 IPW_DEBUG_RX("CRC error in packet. Dropping.\n");
2593 dev
->stats
.rx_errors
++;
2597 pci_unmap_single(priv
->pci_dev
, packet
->dma_addr
,
2598 sizeof(struct ipw2100_rx
), PCI_DMA_FROMDEVICE
);
2599 memmove(packet
->skb
->data
+ sizeof(struct ipw_rt_hdr
),
2600 packet
->skb
->data
, status
->frame_size
);
2602 ipw_rt
= (struct ipw_rt_hdr
*) packet
->skb
->data
;
2604 ipw_rt
->rt_hdr
.it_version
= PKTHDR_RADIOTAP_VERSION
;
2605 ipw_rt
->rt_hdr
.it_pad
= 0; /* always good to zero */
2606 ipw_rt
->rt_hdr
.it_len
= cpu_to_le16(sizeof(struct ipw_rt_hdr
)); /* total hdr+data */
2608 ipw_rt
->rt_hdr
.it_present
= cpu_to_le32(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL
);
2610 ipw_rt
->rt_dbmsignal
= status
->rssi
+ IPW2100_RSSI_TO_DBM
;
2612 skb_put(packet
->skb
, status
->frame_size
+ sizeof(struct ipw_rt_hdr
));
2614 if (!libipw_rx(priv
->ieee
, packet
->skb
, stats
)) {
2615 dev
->stats
.rx_errors
++;
2617 /* libipw_rx failed, so it didn't free the SKB */
2618 dev_kfree_skb_any(packet
->skb
);
2622 /* We need to allocate a new SKB and attach it to the RDB. */
2623 if (unlikely(ipw2100_alloc_skb(priv
, packet
))) {
2625 "%s: Unable to allocate SKB onto RBD ring - disabling "
2626 "adapter.\n", dev
->name
);
2627 /* TODO: schedule adapter shutdown */
2628 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2631 /* Update the RDB entry */
2632 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
2637 static int ipw2100_corruption_check(struct ipw2100_priv
*priv
, int i
)
2639 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2640 struct ipw2100_rx
*u
= priv
->rx_buffers
[i
].rxp
;
2641 u16 frame_type
= status
->status_fields
& STATUS_TYPE_MASK
;
2643 switch (frame_type
) {
2644 case COMMAND_STATUS_VAL
:
2645 return (status
->frame_size
!= sizeof(u
->rx_data
.command
));
2646 case STATUS_CHANGE_VAL
:
2647 return (status
->frame_size
!= sizeof(u
->rx_data
.status
));
2648 case HOST_NOTIFICATION_VAL
:
2649 return (status
->frame_size
< sizeof(u
->rx_data
.notification
));
2650 case P80211_DATA_VAL
:
2651 case P8023_DATA_VAL
:
2652 #ifdef CONFIG_IPW2100_MONITOR
2655 switch (WLAN_FC_GET_TYPE(le16_to_cpu(u
->rx_data
.header
.frame_ctl
))) {
2656 case IEEE80211_FTYPE_MGMT
:
2657 case IEEE80211_FTYPE_CTL
:
2659 case IEEE80211_FTYPE_DATA
:
2660 return (status
->frame_size
>
2661 IPW_MAX_802_11_PAYLOAD_LENGTH
);
2670 * ipw2100 interrupts are disabled at this point, and the ISR
2671 * is the only code that calls this method. So, we do not need
2672 * to play with any locks.
2674 * RX Queue works as follows:
2676 * Read index - firmware places packet in entry identified by the
2677 * Read index and advances Read index. In this manner,
2678 * Read index will always point to the next packet to
2679 * be filled--but not yet valid.
2681 * Write index - driver fills this entry with an unused RBD entry.
2682 * This entry has not filled by the firmware yet.
2684 * In between the W and R indexes are the RBDs that have been received
2685 * but not yet processed.
2687 * The process of handling packets will start at WRITE + 1 and advance
2688 * until it reaches the READ index.
2690 * The WRITE index is cached in the variable 'priv->rx_queue.next'.
2693 static void __ipw2100_rx_process(struct ipw2100_priv
*priv
)
2695 struct ipw2100_bd_queue
*rxq
= &priv
->rx_queue
;
2696 struct ipw2100_status_queue
*sq
= &priv
->status_queue
;
2697 struct ipw2100_rx_packet
*packet
;
2700 struct ipw2100_rx
*u
;
2701 struct libipw_rx_stats stats
= {
2702 .mac_time
= jiffies
,
2705 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_READ_INDEX
, &r
);
2706 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
, &w
);
2708 if (r
>= rxq
->entries
) {
2709 IPW_DEBUG_RX("exit - bad read index\n");
2713 i
= (rxq
->next
+ 1) % rxq
->entries
;
2716 /* IPW_DEBUG_RX("r = %d : w = %d : processing = %d\n",
2717 r, rxq->next, i); */
2719 packet
= &priv
->rx_buffers
[i
];
2721 /* Sync the DMA for the RX buffer so CPU is sure to get
2722 * the correct values */
2723 pci_dma_sync_single_for_cpu(priv
->pci_dev
, packet
->dma_addr
,
2724 sizeof(struct ipw2100_rx
),
2725 PCI_DMA_FROMDEVICE
);
2727 if (unlikely(ipw2100_corruption_check(priv
, i
))) {
2728 ipw2100_corruption_detected(priv
, i
);
2733 frame_type
= sq
->drv
[i
].status_fields
& STATUS_TYPE_MASK
;
2734 stats
.rssi
= sq
->drv
[i
].rssi
+ IPW2100_RSSI_TO_DBM
;
2735 stats
.len
= sq
->drv
[i
].frame_size
;
2738 if (stats
.rssi
!= 0)
2739 stats
.mask
|= LIBIPW_STATMASK_RSSI
;
2740 stats
.freq
= LIBIPW_24GHZ_BAND
;
2742 IPW_DEBUG_RX("%s: '%s' frame type received (%d).\n",
2743 priv
->net_dev
->name
, frame_types
[frame_type
],
2746 switch (frame_type
) {
2747 case COMMAND_STATUS_VAL
:
2748 /* Reset Rx watchdog */
2749 isr_rx_complete_command(priv
, &u
->rx_data
.command
);
2752 case STATUS_CHANGE_VAL
:
2753 isr_status_change(priv
, u
->rx_data
.status
);
2756 case P80211_DATA_VAL
:
2757 case P8023_DATA_VAL
:
2758 #ifdef CONFIG_IPW2100_MONITOR
2759 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
2760 isr_rx_monitor(priv
, i
, &stats
);
2764 if (stats
.len
< sizeof(struct libipw_hdr_3addr
))
2766 switch (WLAN_FC_GET_TYPE(le16_to_cpu(u
->rx_data
.header
.frame_ctl
))) {
2767 case IEEE80211_FTYPE_MGMT
:
2768 libipw_rx_mgt(priv
->ieee
,
2769 &u
->rx_data
.header
, &stats
);
2772 case IEEE80211_FTYPE_CTL
:
2775 case IEEE80211_FTYPE_DATA
:
2776 isr_rx(priv
, i
, &stats
);
2784 /* clear status field associated with this RBD */
2785 rxq
->drv
[i
].status
.info
.field
= 0;
2787 i
= (i
+ 1) % rxq
->entries
;
2791 /* backtrack one entry, wrapping to end if at 0 */
2792 rxq
->next
= (i
? i
: rxq
->entries
) - 1;
2794 write_register(priv
->net_dev
,
2795 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
, rxq
->next
);
2800 * __ipw2100_tx_process
2802 * This routine will determine whether the next packet on
2803 * the fw_pend_list has been processed by the firmware yet.
2805 * If not, then it does nothing and returns.
2807 * If so, then it removes the item from the fw_pend_list, frees
2808 * any associated storage, and places the item back on the
2809 * free list of its source (either msg_free_list or tx_free_list)
2811 * TX Queue works as follows:
2813 * Read index - points to the next TBD that the firmware will
2814 * process. The firmware will read the data, and once
2815 * done processing, it will advance the Read index.
2817 * Write index - driver fills this entry with an constructed TBD
2818 * entry. The Write index is not advanced until the
2819 * packet has been configured.
2821 * In between the W and R indexes are the TBDs that have NOT been
2822 * processed. Lagging behind the R index are packets that have
2823 * been processed but have not been freed by the driver.
2825 * In order to free old storage, an internal index will be maintained
2826 * that points to the next packet to be freed. When all used
2827 * packets have been freed, the oldest index will be the same as the
2828 * firmware's read index.
2830 * The OLDEST index is cached in the variable 'priv->tx_queue.oldest'
2832 * Because the TBD structure can not contain arbitrary data, the
2833 * driver must keep an internal queue of cached allocations such that
2834 * it can put that data back into the tx_free_list and msg_free_list
2835 * for use by future command and data packets.
2838 static int __ipw2100_tx_process(struct ipw2100_priv
*priv
)
2840 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
2841 struct ipw2100_bd
*tbd
;
2842 struct list_head
*element
;
2843 struct ipw2100_tx_packet
*packet
;
2844 int descriptors_used
;
2846 u32 r
, w
, frag_num
= 0;
2848 if (list_empty(&priv
->fw_pend_list
))
2851 element
= priv
->fw_pend_list
.next
;
2853 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
2854 tbd
= &txq
->drv
[packet
->index
];
2856 /* Determine how many TBD entries must be finished... */
2857 switch (packet
->type
) {
2859 /* COMMAND uses only one slot; don't advance */
2860 descriptors_used
= 1;
2865 /* DATA uses two slots; advance and loop position. */
2866 descriptors_used
= tbd
->num_fragments
;
2867 frag_num
= tbd
->num_fragments
- 1;
2868 e
= txq
->oldest
+ frag_num
;
2873 printk(KERN_WARNING DRV_NAME
": %s: Bad fw_pend_list entry!\n",
2874 priv
->net_dev
->name
);
2878 /* if the last TBD is not done by NIC yet, then packet is
2879 * not ready to be released.
2882 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX
,
2884 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
2887 printk(KERN_WARNING DRV_NAME
": %s: write index mismatch\n",
2888 priv
->net_dev
->name
);
2891 * txq->next is the index of the last packet written txq->oldest is
2892 * the index of the r is the index of the next packet to be read by
2897 * Quick graphic to help you visualize the following
2898 * if / else statement
2900 * ===>| s---->|===============
2902 * | a | b | c | d | e | f | g | h | i | j | k | l
2906 * w - updated by driver
2907 * r - updated by firmware
2908 * s - start of oldest BD entry (txq->oldest)
2909 * e - end of oldest BD entry
2912 if (!((r
<= w
&& (e
< r
|| e
>= w
)) || (e
< r
&& e
>= w
))) {
2913 IPW_DEBUG_TX("exit - no processed packets ready to release.\n");
2918 DEC_STAT(&priv
->fw_pend_stat
);
2920 #ifdef CONFIG_IPW2100_DEBUG
2923 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i
,
2925 (u32
) (txq
->nic
+ i
* sizeof(struct ipw2100_bd
)),
2926 txq
->drv
[i
].host_addr
, txq
->drv
[i
].buf_length
);
2928 if (packet
->type
== DATA
) {
2929 i
= (i
+ 1) % txq
->entries
;
2931 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i
,
2933 (u32
) (txq
->nic
+ i
*
2934 sizeof(struct ipw2100_bd
)),
2935 (u32
) txq
->drv
[i
].host_addr
,
2936 txq
->drv
[i
].buf_length
);
2941 switch (packet
->type
) {
2943 if (txq
->drv
[txq
->oldest
].status
.info
.fields
.txType
!= 0)
2944 printk(KERN_WARNING DRV_NAME
": %s: Queue mismatch. "
2945 "Expecting DATA TBD but pulled "
2946 "something else: ids %d=%d.\n",
2947 priv
->net_dev
->name
, txq
->oldest
, packet
->index
);
2949 /* DATA packet; we have to unmap and free the SKB */
2950 for (i
= 0; i
< frag_num
; i
++) {
2951 tbd
= &txq
->drv
[(packet
->index
+ 1 + i
) % txq
->entries
];
2953 IPW_DEBUG_TX("TX%d P=%08x L=%d\n",
2954 (packet
->index
+ 1 + i
) % txq
->entries
,
2955 tbd
->host_addr
, tbd
->buf_length
);
2957 pci_unmap_single(priv
->pci_dev
,
2959 tbd
->buf_length
, PCI_DMA_TODEVICE
);
2962 libipw_txb_free(packet
->info
.d_struct
.txb
);
2963 packet
->info
.d_struct
.txb
= NULL
;
2965 list_add_tail(element
, &priv
->tx_free_list
);
2966 INC_STAT(&priv
->tx_free_stat
);
2968 /* We have a free slot in the Tx queue, so wake up the
2969 * transmit layer if it is stopped. */
2970 if (priv
->status
& STATUS_ASSOCIATED
)
2971 netif_wake_queue(priv
->net_dev
);
2973 /* A packet was processed by the hardware, so update the
2975 priv
->net_dev
->trans_start
= jiffies
;
2980 if (txq
->drv
[txq
->oldest
].status
.info
.fields
.txType
!= 1)
2981 printk(KERN_WARNING DRV_NAME
": %s: Queue mismatch. "
2982 "Expecting COMMAND TBD but pulled "
2983 "something else: ids %d=%d.\n",
2984 priv
->net_dev
->name
, txq
->oldest
, packet
->index
);
2986 #ifdef CONFIG_IPW2100_DEBUG
2987 if (packet
->info
.c_struct
.cmd
->host_command_reg
<
2988 ARRAY_SIZE(command_types
))
2989 IPW_DEBUG_TX("Command '%s (%d)' processed: %d.\n",
2990 command_types
[packet
->info
.c_struct
.cmd
->
2992 packet
->info
.c_struct
.cmd
->
2994 packet
->info
.c_struct
.cmd
->cmd_status_reg
);
2997 list_add_tail(element
, &priv
->msg_free_list
);
2998 INC_STAT(&priv
->msg_free_stat
);
3002 /* advance oldest used TBD pointer to start of next entry */
3003 txq
->oldest
= (e
+ 1) % txq
->entries
;
3004 /* increase available TBDs number */
3005 txq
->available
+= descriptors_used
;
3006 SET_STAT(&priv
->txq_stat
, txq
->available
);
3008 IPW_DEBUG_TX("packet latency (send to process) %ld jiffies\n",
3009 jiffies
- packet
->jiffy_start
);
3011 return (!list_empty(&priv
->fw_pend_list
));
3014 static inline void __ipw2100_tx_complete(struct ipw2100_priv
*priv
)
3018 while (__ipw2100_tx_process(priv
) && i
< 200)
3022 printk(KERN_WARNING DRV_NAME
": "
3023 "%s: Driver is running slow (%d iters).\n",
3024 priv
->net_dev
->name
, i
);
3028 static void ipw2100_tx_send_commands(struct ipw2100_priv
*priv
)
3030 struct list_head
*element
;
3031 struct ipw2100_tx_packet
*packet
;
3032 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
3033 struct ipw2100_bd
*tbd
;
3034 int next
= txq
->next
;
3036 while (!list_empty(&priv
->msg_pend_list
)) {
3037 /* if there isn't enough space in TBD queue, then
3038 * don't stuff a new one in.
3039 * NOTE: 3 are needed as a command will take one,
3040 * and there is a minimum of 2 that must be
3041 * maintained between the r and w indexes
3043 if (txq
->available
<= 3) {
3044 IPW_DEBUG_TX("no room in tx_queue\n");
3048 element
= priv
->msg_pend_list
.next
;
3050 DEC_STAT(&priv
->msg_pend_stat
);
3052 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3054 IPW_DEBUG_TX("using TBD at virt=%p, phys=%04X\n",
3055 &txq
->drv
[txq
->next
],
3056 (u32
) (txq
->nic
+ txq
->next
*
3057 sizeof(struct ipw2100_bd
)));
3059 packet
->index
= txq
->next
;
3061 tbd
= &txq
->drv
[txq
->next
];
3063 /* initialize TBD */
3064 tbd
->host_addr
= packet
->info
.c_struct
.cmd_phys
;
3065 tbd
->buf_length
= sizeof(struct ipw2100_cmd_header
);
3066 /* not marking number of fragments causes problems
3067 * with f/w debug version */
3068 tbd
->num_fragments
= 1;
3069 tbd
->status
.info
.field
=
3070 IPW_BD_STATUS_TX_FRAME_COMMAND
|
3071 IPW_BD_STATUS_TX_INTERRUPT_ENABLE
;
3073 /* update TBD queue counters */
3075 txq
->next
%= txq
->entries
;
3077 DEC_STAT(&priv
->txq_stat
);
3079 list_add_tail(element
, &priv
->fw_pend_list
);
3080 INC_STAT(&priv
->fw_pend_stat
);
3083 if (txq
->next
!= next
) {
3084 /* kick off the DMA by notifying firmware the
3085 * write index has moved; make sure TBD stores are sync'd */
3087 write_register(priv
->net_dev
,
3088 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
3094 * ipw2100_tx_send_data
3097 static void ipw2100_tx_send_data(struct ipw2100_priv
*priv
)
3099 struct list_head
*element
;
3100 struct ipw2100_tx_packet
*packet
;
3101 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
3102 struct ipw2100_bd
*tbd
;
3103 int next
= txq
->next
;
3105 struct ipw2100_data_header
*ipw_hdr
;
3106 struct libipw_hdr_3addr
*hdr
;
3108 while (!list_empty(&priv
->tx_pend_list
)) {
3109 /* if there isn't enough space in TBD queue, then
3110 * don't stuff a new one in.
3111 * NOTE: 4 are needed as a data will take two,
3112 * and there is a minimum of 2 that must be
3113 * maintained between the r and w indexes
3115 element
= priv
->tx_pend_list
.next
;
3116 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3118 if (unlikely(1 + packet
->info
.d_struct
.txb
->nr_frags
>
3120 /* TODO: Support merging buffers if more than
3121 * IPW_MAX_BDS are used */
3122 IPW_DEBUG_INFO("%s: Maximum BD threshold exceeded. "
3123 "Increase fragmentation level.\n",
3124 priv
->net_dev
->name
);
3127 if (txq
->available
<= 3 + packet
->info
.d_struct
.txb
->nr_frags
) {
3128 IPW_DEBUG_TX("no room in tx_queue\n");
3133 DEC_STAT(&priv
->tx_pend_stat
);
3135 tbd
= &txq
->drv
[txq
->next
];
3137 packet
->index
= txq
->next
;
3139 ipw_hdr
= packet
->info
.d_struct
.data
;
3140 hdr
= (struct libipw_hdr_3addr
*)packet
->info
.d_struct
.txb
->
3143 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
) {
3144 /* To DS: Addr1 = BSSID, Addr2 = SA,
3146 memcpy(ipw_hdr
->src_addr
, hdr
->addr2
, ETH_ALEN
);
3147 memcpy(ipw_hdr
->dst_addr
, hdr
->addr3
, ETH_ALEN
);
3148 } else if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
3149 /* not From/To DS: Addr1 = DA, Addr2 = SA,
3151 memcpy(ipw_hdr
->src_addr
, hdr
->addr2
, ETH_ALEN
);
3152 memcpy(ipw_hdr
->dst_addr
, hdr
->addr1
, ETH_ALEN
);
3155 ipw_hdr
->host_command_reg
= SEND
;
3156 ipw_hdr
->host_command_reg1
= 0;
3158 /* For now we only support host based encryption */
3159 ipw_hdr
->needs_encryption
= 0;
3160 ipw_hdr
->encrypted
= packet
->info
.d_struct
.txb
->encrypted
;
3161 if (packet
->info
.d_struct
.txb
->nr_frags
> 1)
3162 ipw_hdr
->fragment_size
=
3163 packet
->info
.d_struct
.txb
->frag_size
-
3166 ipw_hdr
->fragment_size
= 0;
3168 tbd
->host_addr
= packet
->info
.d_struct
.data_phys
;
3169 tbd
->buf_length
= sizeof(struct ipw2100_data_header
);
3170 tbd
->num_fragments
= 1 + packet
->info
.d_struct
.txb
->nr_frags
;
3171 tbd
->status
.info
.field
=
3172 IPW_BD_STATUS_TX_FRAME_802_3
|
3173 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT
;
3175 txq
->next
%= txq
->entries
;
3177 IPW_DEBUG_TX("data header tbd TX%d P=%08x L=%d\n",
3178 packet
->index
, tbd
->host_addr
, tbd
->buf_length
);
3179 #ifdef CONFIG_IPW2100_DEBUG
3180 if (packet
->info
.d_struct
.txb
->nr_frags
> 1)
3181 IPW_DEBUG_FRAG("fragment Tx: %d frames\n",
3182 packet
->info
.d_struct
.txb
->nr_frags
);
3185 for (i
= 0; i
< packet
->info
.d_struct
.txb
->nr_frags
; i
++) {
3186 tbd
= &txq
->drv
[txq
->next
];
3187 if (i
== packet
->info
.d_struct
.txb
->nr_frags
- 1)
3188 tbd
->status
.info
.field
=
3189 IPW_BD_STATUS_TX_FRAME_802_3
|
3190 IPW_BD_STATUS_TX_INTERRUPT_ENABLE
;
3192 tbd
->status
.info
.field
=
3193 IPW_BD_STATUS_TX_FRAME_802_3
|
3194 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT
;
3196 tbd
->buf_length
= packet
->info
.d_struct
.txb
->
3197 fragments
[i
]->len
- LIBIPW_3ADDR_LEN
;
3199 tbd
->host_addr
= pci_map_single(priv
->pci_dev
,
3200 packet
->info
.d_struct
.
3207 IPW_DEBUG_TX("data frag tbd TX%d P=%08x L=%d\n",
3208 txq
->next
, tbd
->host_addr
,
3211 pci_dma_sync_single_for_device(priv
->pci_dev
,
3217 txq
->next
%= txq
->entries
;
3220 txq
->available
-= 1 + packet
->info
.d_struct
.txb
->nr_frags
;
3221 SET_STAT(&priv
->txq_stat
, txq
->available
);
3223 list_add_tail(element
, &priv
->fw_pend_list
);
3224 INC_STAT(&priv
->fw_pend_stat
);
3227 if (txq
->next
!= next
) {
3228 /* kick off the DMA by notifying firmware the
3229 * write index has moved; make sure TBD stores are sync'd */
3230 write_register(priv
->net_dev
,
3231 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
3236 static void ipw2100_irq_tasklet(struct ipw2100_priv
*priv
)
3238 struct net_device
*dev
= priv
->net_dev
;
3239 unsigned long flags
;
3242 spin_lock_irqsave(&priv
->low_lock
, flags
);
3243 ipw2100_disable_interrupts(priv
);
3245 read_register(dev
, IPW_REG_INTA
, &inta
);
3247 IPW_DEBUG_ISR("enter - INTA: 0x%08lX\n",
3248 (unsigned long)inta
& IPW_INTERRUPT_MASK
);
3253 /* We do not loop and keep polling for more interrupts as this
3254 * is frowned upon and doesn't play nicely with other potentially
3256 IPW_DEBUG_ISR("INTA: 0x%08lX\n",
3257 (unsigned long)inta
& IPW_INTERRUPT_MASK
);
3259 if (inta
& IPW2100_INTA_FATAL_ERROR
) {
3260 printk(KERN_WARNING DRV_NAME
3261 ": Fatal interrupt. Scheduling firmware restart.\n");
3263 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_FATAL_ERROR
);
3265 read_nic_dword(dev
, IPW_NIC_FATAL_ERROR
, &priv
->fatal_error
);
3266 IPW_DEBUG_INFO("%s: Fatal error value: 0x%08X\n",
3267 priv
->net_dev
->name
, priv
->fatal_error
);
3269 read_nic_dword(dev
, IPW_ERROR_ADDR(priv
->fatal_error
), &tmp
);
3270 IPW_DEBUG_INFO("%s: Fatal error address value: 0x%08X\n",
3271 priv
->net_dev
->name
, tmp
);
3273 /* Wake up any sleeping jobs */
3274 schedule_reset(priv
);
3277 if (inta
& IPW2100_INTA_PARITY_ERROR
) {
3278 printk(KERN_ERR DRV_NAME
3279 ": ***** PARITY ERROR INTERRUPT !!!!\n");
3281 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_PARITY_ERROR
);
3284 if (inta
& IPW2100_INTA_RX_TRANSFER
) {
3285 IPW_DEBUG_ISR("RX interrupt\n");
3287 priv
->rx_interrupts
++;
3289 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_RX_TRANSFER
);
3291 __ipw2100_rx_process(priv
);
3292 __ipw2100_tx_complete(priv
);
3295 if (inta
& IPW2100_INTA_TX_TRANSFER
) {
3296 IPW_DEBUG_ISR("TX interrupt\n");
3298 priv
->tx_interrupts
++;
3300 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_TX_TRANSFER
);
3302 __ipw2100_tx_complete(priv
);
3303 ipw2100_tx_send_commands(priv
);
3304 ipw2100_tx_send_data(priv
);
3307 if (inta
& IPW2100_INTA_TX_COMPLETE
) {
3308 IPW_DEBUG_ISR("TX complete\n");
3310 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_TX_COMPLETE
);
3312 __ipw2100_tx_complete(priv
);
3315 if (inta
& IPW2100_INTA_EVENT_INTERRUPT
) {
3316 /* ipw2100_handle_event(dev); */
3318 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_EVENT_INTERRUPT
);
3321 if (inta
& IPW2100_INTA_FW_INIT_DONE
) {
3322 IPW_DEBUG_ISR("FW init done interrupt\n");
3325 read_register(dev
, IPW_REG_INTA
, &tmp
);
3326 if (tmp
& (IPW2100_INTA_FATAL_ERROR
|
3327 IPW2100_INTA_PARITY_ERROR
)) {
3328 write_register(dev
, IPW_REG_INTA
,
3329 IPW2100_INTA_FATAL_ERROR
|
3330 IPW2100_INTA_PARITY_ERROR
);
3333 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_FW_INIT_DONE
);
3336 if (inta
& IPW2100_INTA_STATUS_CHANGE
) {
3337 IPW_DEBUG_ISR("Status change interrupt\n");
3339 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_STATUS_CHANGE
);
3342 if (inta
& IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE
) {
3343 IPW_DEBUG_ISR("slave host mode interrupt\n");
3345 write_register(dev
, IPW_REG_INTA
,
3346 IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE
);
3350 ipw2100_enable_interrupts(priv
);
3352 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3354 IPW_DEBUG_ISR("exit\n");
3357 static irqreturn_t
ipw2100_interrupt(int irq
, void *data
)
3359 struct ipw2100_priv
*priv
= data
;
3360 u32 inta
, inta_mask
;
3365 spin_lock(&priv
->low_lock
);
3367 /* We check to see if we should be ignoring interrupts before
3368 * we touch the hardware. During ucode load if we try and handle
3369 * an interrupt we can cause keyboard problems as well as cause
3370 * the ucode to fail to initialize */
3371 if (!(priv
->status
& STATUS_INT_ENABLED
)) {
3376 read_register(priv
->net_dev
, IPW_REG_INTA_MASK
, &inta_mask
);
3377 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
3379 if (inta
== 0xFFFFFFFF) {
3380 /* Hardware disappeared */
3381 printk(KERN_WARNING DRV_NAME
": IRQ INTA == 0xFFFFFFFF\n");
3385 inta
&= IPW_INTERRUPT_MASK
;
3387 if (!(inta
& inta_mask
)) {
3388 /* Shared interrupt */
3392 /* We disable the hardware interrupt here just to prevent unneeded
3393 * calls to be made. We disable this again within the actual
3394 * work tasklet, so if another part of the code re-enables the
3395 * interrupt, that is fine */
3396 ipw2100_disable_interrupts(priv
);
3398 tasklet_schedule(&priv
->irq_tasklet
);
3399 spin_unlock(&priv
->low_lock
);
3403 spin_unlock(&priv
->low_lock
);
3407 static netdev_tx_t
ipw2100_tx(struct libipw_txb
*txb
,
3408 struct net_device
*dev
, int pri
)
3410 struct ipw2100_priv
*priv
= libipw_priv(dev
);
3411 struct list_head
*element
;
3412 struct ipw2100_tx_packet
*packet
;
3413 unsigned long flags
;
3415 spin_lock_irqsave(&priv
->low_lock
, flags
);
3417 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
3418 IPW_DEBUG_INFO("Can not transmit when not connected.\n");
3419 priv
->net_dev
->stats
.tx_carrier_errors
++;
3420 netif_stop_queue(dev
);
3424 if (list_empty(&priv
->tx_free_list
))
3427 element
= priv
->tx_free_list
.next
;
3428 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3430 packet
->info
.d_struct
.txb
= txb
;
3432 IPW_DEBUG_TX("Sending fragment (%d bytes):\n", txb
->fragments
[0]->len
);
3433 printk_buf(IPW_DL_TX
, txb
->fragments
[0]->data
, txb
->fragments
[0]->len
);
3435 packet
->jiffy_start
= jiffies
;
3438 DEC_STAT(&priv
->tx_free_stat
);
3440 list_add_tail(element
, &priv
->tx_pend_list
);
3441 INC_STAT(&priv
->tx_pend_stat
);
3443 ipw2100_tx_send_data(priv
);
3445 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3446 return NETDEV_TX_OK
;
3449 netif_stop_queue(dev
);
3450 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3451 return NETDEV_TX_BUSY
;
3454 static int ipw2100_msg_allocate(struct ipw2100_priv
*priv
)
3456 int i
, j
, err
= -EINVAL
;
3461 kmalloc(IPW_COMMAND_POOL_SIZE
* sizeof(struct ipw2100_tx_packet
),
3463 if (!priv
->msg_buffers
)
3466 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++) {
3467 v
= pci_alloc_consistent(priv
->pci_dev
,
3468 sizeof(struct ipw2100_cmd_header
), &p
);
3470 printk(KERN_ERR DRV_NAME
": "
3471 "%s: PCI alloc failed for msg "
3472 "buffers.\n", priv
->net_dev
->name
);
3477 memset(v
, 0, sizeof(struct ipw2100_cmd_header
));
3479 priv
->msg_buffers
[i
].type
= COMMAND
;
3480 priv
->msg_buffers
[i
].info
.c_struct
.cmd
=
3481 (struct ipw2100_cmd_header
*)v
;
3482 priv
->msg_buffers
[i
].info
.c_struct
.cmd_phys
= p
;
3485 if (i
== IPW_COMMAND_POOL_SIZE
)
3488 for (j
= 0; j
< i
; j
++) {
3489 pci_free_consistent(priv
->pci_dev
,
3490 sizeof(struct ipw2100_cmd_header
),
3491 priv
->msg_buffers
[j
].info
.c_struct
.cmd
,
3492 priv
->msg_buffers
[j
].info
.c_struct
.
3496 kfree(priv
->msg_buffers
);
3497 priv
->msg_buffers
= NULL
;
3502 static int ipw2100_msg_initialize(struct ipw2100_priv
*priv
)
3506 INIT_LIST_HEAD(&priv
->msg_free_list
);
3507 INIT_LIST_HEAD(&priv
->msg_pend_list
);
3509 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++)
3510 list_add_tail(&priv
->msg_buffers
[i
].list
, &priv
->msg_free_list
);
3511 SET_STAT(&priv
->msg_free_stat
, i
);
3516 static void ipw2100_msg_free(struct ipw2100_priv
*priv
)
3520 if (!priv
->msg_buffers
)
3523 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++) {
3524 pci_free_consistent(priv
->pci_dev
,
3525 sizeof(struct ipw2100_cmd_header
),
3526 priv
->msg_buffers
[i
].info
.c_struct
.cmd
,
3527 priv
->msg_buffers
[i
].info
.c_struct
.
3531 kfree(priv
->msg_buffers
);
3532 priv
->msg_buffers
= NULL
;
3535 static ssize_t
show_pci(struct device
*d
, struct device_attribute
*attr
,
3538 struct pci_dev
*pci_dev
= container_of(d
, struct pci_dev
, dev
);
3543 for (i
= 0; i
< 16; i
++) {
3544 out
+= sprintf(out
, "[%08X] ", i
* 16);
3545 for (j
= 0; j
< 16; j
+= 4) {
3546 pci_read_config_dword(pci_dev
, i
* 16 + j
, &val
);
3547 out
+= sprintf(out
, "%08X ", val
);
3549 out
+= sprintf(out
, "\n");
3555 static DEVICE_ATTR(pci
, S_IRUGO
, show_pci
, NULL
);
3557 static ssize_t
show_cfg(struct device
*d
, struct device_attribute
*attr
,
3560 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3561 return sprintf(buf
, "0x%08x\n", (int)p
->config
);
3564 static DEVICE_ATTR(cfg
, S_IRUGO
, show_cfg
, NULL
);
3566 static ssize_t
show_status(struct device
*d
, struct device_attribute
*attr
,
3569 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3570 return sprintf(buf
, "0x%08x\n", (int)p
->status
);
3573 static DEVICE_ATTR(status
, S_IRUGO
, show_status
, NULL
);
3575 static ssize_t
show_capability(struct device
*d
, struct device_attribute
*attr
,
3578 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3579 return sprintf(buf
, "0x%08x\n", (int)p
->capability
);
3582 static DEVICE_ATTR(capability
, S_IRUGO
, show_capability
, NULL
);
3584 #define IPW2100_REG(x) { IPW_ ##x, #x }
3585 static const struct {
3589 IPW2100_REG(REG_GP_CNTRL
),
3590 IPW2100_REG(REG_GPIO
),
3591 IPW2100_REG(REG_INTA
),
3592 IPW2100_REG(REG_INTA_MASK
), IPW2100_REG(REG_RESET_REG
),};
3593 #define IPW2100_NIC(x, s) { x, #x, s }
3594 static const struct {
3599 IPW2100_NIC(IPW2100_CONTROL_REG
, 2),
3600 IPW2100_NIC(0x210014, 1), IPW2100_NIC(0x210000, 1),};
3601 #define IPW2100_ORD(x, d) { IPW_ORD_ ##x, #x, d }
3602 static const struct {
3607 IPW2100_ORD(STAT_TX_HOST_REQUESTS
, "requested Host Tx's (MSDU)"),
3608 IPW2100_ORD(STAT_TX_HOST_COMPLETE
,
3609 "successful Host Tx's (MSDU)"),
3610 IPW2100_ORD(STAT_TX_DIR_DATA
,
3611 "successful Directed Tx's (MSDU)"),
3612 IPW2100_ORD(STAT_TX_DIR_DATA1
,
3613 "successful Directed Tx's (MSDU) @ 1MB"),
3614 IPW2100_ORD(STAT_TX_DIR_DATA2
,
3615 "successful Directed Tx's (MSDU) @ 2MB"),
3616 IPW2100_ORD(STAT_TX_DIR_DATA5_5
,
3617 "successful Directed Tx's (MSDU) @ 5_5MB"),
3618 IPW2100_ORD(STAT_TX_DIR_DATA11
,
3619 "successful Directed Tx's (MSDU) @ 11MB"),
3620 IPW2100_ORD(STAT_TX_NODIR_DATA1
,
3621 "successful Non_Directed Tx's (MSDU) @ 1MB"),
3622 IPW2100_ORD(STAT_TX_NODIR_DATA2
,
3623 "successful Non_Directed Tx's (MSDU) @ 2MB"),
3624 IPW2100_ORD(STAT_TX_NODIR_DATA5_5
,
3625 "successful Non_Directed Tx's (MSDU) @ 5.5MB"),
3626 IPW2100_ORD(STAT_TX_NODIR_DATA11
,
3627 "successful Non_Directed Tx's (MSDU) @ 11MB"),
3628 IPW2100_ORD(STAT_NULL_DATA
, "successful NULL data Tx's"),
3629 IPW2100_ORD(STAT_TX_RTS
, "successful Tx RTS"),
3630 IPW2100_ORD(STAT_TX_CTS
, "successful Tx CTS"),
3631 IPW2100_ORD(STAT_TX_ACK
, "successful Tx ACK"),
3632 IPW2100_ORD(STAT_TX_ASSN
, "successful Association Tx's"),
3633 IPW2100_ORD(STAT_TX_ASSN_RESP
,
3634 "successful Association response Tx's"),
3635 IPW2100_ORD(STAT_TX_REASSN
,
3636 "successful Reassociation Tx's"),
3637 IPW2100_ORD(STAT_TX_REASSN_RESP
,
3638 "successful Reassociation response Tx's"),
3639 IPW2100_ORD(STAT_TX_PROBE
,
3640 "probes successfully transmitted"),
3641 IPW2100_ORD(STAT_TX_PROBE_RESP
,
3642 "probe responses successfully transmitted"),
3643 IPW2100_ORD(STAT_TX_BEACON
, "tx beacon"),
3644 IPW2100_ORD(STAT_TX_ATIM
, "Tx ATIM"),
3645 IPW2100_ORD(STAT_TX_DISASSN
,
3646 "successful Disassociation TX"),
3647 IPW2100_ORD(STAT_TX_AUTH
, "successful Authentication Tx"),
3648 IPW2100_ORD(STAT_TX_DEAUTH
,
3649 "successful Deauthentication TX"),
3650 IPW2100_ORD(STAT_TX_TOTAL_BYTES
,
3651 "Total successful Tx data bytes"),
3652 IPW2100_ORD(STAT_TX_RETRIES
, "Tx retries"),
3653 IPW2100_ORD(STAT_TX_RETRY1
, "Tx retries at 1MBPS"),
3654 IPW2100_ORD(STAT_TX_RETRY2
, "Tx retries at 2MBPS"),
3655 IPW2100_ORD(STAT_TX_RETRY5_5
, "Tx retries at 5.5MBPS"),
3656 IPW2100_ORD(STAT_TX_RETRY11
, "Tx retries at 11MBPS"),
3657 IPW2100_ORD(STAT_TX_FAILURES
, "Tx Failures"),
3658 IPW2100_ORD(STAT_TX_MAX_TRIES_IN_HOP
,
3659 "times max tries in a hop failed"),
3660 IPW2100_ORD(STAT_TX_DISASSN_FAIL
,
3661 "times disassociation failed"),
3662 IPW2100_ORD(STAT_TX_ERR_CTS
, "missed/bad CTS frames"),
3663 IPW2100_ORD(STAT_TX_ERR_ACK
, "tx err due to acks"),
3664 IPW2100_ORD(STAT_RX_HOST
, "packets passed to host"),
3665 IPW2100_ORD(STAT_RX_DIR_DATA
, "directed packets"),
3666 IPW2100_ORD(STAT_RX_DIR_DATA1
, "directed packets at 1MB"),
3667 IPW2100_ORD(STAT_RX_DIR_DATA2
, "directed packets at 2MB"),
3668 IPW2100_ORD(STAT_RX_DIR_DATA5_5
,
3669 "directed packets at 5.5MB"),
3670 IPW2100_ORD(STAT_RX_DIR_DATA11
, "directed packets at 11MB"),
3671 IPW2100_ORD(STAT_RX_NODIR_DATA
, "nondirected packets"),
3672 IPW2100_ORD(STAT_RX_NODIR_DATA1
,
3673 "nondirected packets at 1MB"),
3674 IPW2100_ORD(STAT_RX_NODIR_DATA2
,
3675 "nondirected packets at 2MB"),
3676 IPW2100_ORD(STAT_RX_NODIR_DATA5_5
,
3677 "nondirected packets at 5.5MB"),
3678 IPW2100_ORD(STAT_RX_NODIR_DATA11
,
3679 "nondirected packets at 11MB"),
3680 IPW2100_ORD(STAT_RX_NULL_DATA
, "null data rx's"),
3681 IPW2100_ORD(STAT_RX_RTS
, "Rx RTS"), IPW2100_ORD(STAT_RX_CTS
,
3683 IPW2100_ORD(STAT_RX_ACK
, "Rx ACK"),
3684 IPW2100_ORD(STAT_RX_CFEND
, "Rx CF End"),
3685 IPW2100_ORD(STAT_RX_CFEND_ACK
, "Rx CF End + CF Ack"),
3686 IPW2100_ORD(STAT_RX_ASSN
, "Association Rx's"),
3687 IPW2100_ORD(STAT_RX_ASSN_RESP
, "Association response Rx's"),
3688 IPW2100_ORD(STAT_RX_REASSN
, "Reassociation Rx's"),
3689 IPW2100_ORD(STAT_RX_REASSN_RESP
,
3690 "Reassociation response Rx's"),
3691 IPW2100_ORD(STAT_RX_PROBE
, "probe Rx's"),
3692 IPW2100_ORD(STAT_RX_PROBE_RESP
, "probe response Rx's"),
3693 IPW2100_ORD(STAT_RX_BEACON
, "Rx beacon"),
3694 IPW2100_ORD(STAT_RX_ATIM
, "Rx ATIM"),
3695 IPW2100_ORD(STAT_RX_DISASSN
, "disassociation Rx"),
3696 IPW2100_ORD(STAT_RX_AUTH
, "authentication Rx"),
3697 IPW2100_ORD(STAT_RX_DEAUTH
, "deauthentication Rx"),
3698 IPW2100_ORD(STAT_RX_TOTAL_BYTES
,
3699 "Total rx data bytes received"),
3700 IPW2100_ORD(STAT_RX_ERR_CRC
, "packets with Rx CRC error"),
3701 IPW2100_ORD(STAT_RX_ERR_CRC1
, "Rx CRC errors at 1MB"),
3702 IPW2100_ORD(STAT_RX_ERR_CRC2
, "Rx CRC errors at 2MB"),
3703 IPW2100_ORD(STAT_RX_ERR_CRC5_5
, "Rx CRC errors at 5.5MB"),
3704 IPW2100_ORD(STAT_RX_ERR_CRC11
, "Rx CRC errors at 11MB"),
3705 IPW2100_ORD(STAT_RX_DUPLICATE1
,
3706 "duplicate rx packets at 1MB"),
3707 IPW2100_ORD(STAT_RX_DUPLICATE2
,
3708 "duplicate rx packets at 2MB"),
3709 IPW2100_ORD(STAT_RX_DUPLICATE5_5
,
3710 "duplicate rx packets at 5.5MB"),
3711 IPW2100_ORD(STAT_RX_DUPLICATE11
,
3712 "duplicate rx packets at 11MB"),
3713 IPW2100_ORD(STAT_RX_DUPLICATE
, "duplicate rx packets"),
3714 IPW2100_ORD(PERS_DB_LOCK
, "locking fw permanent db"),
3715 IPW2100_ORD(PERS_DB_SIZE
, "size of fw permanent db"),
3716 IPW2100_ORD(PERS_DB_ADDR
, "address of fw permanent db"),
3717 IPW2100_ORD(STAT_RX_INVALID_PROTOCOL
,
3718 "rx frames with invalid protocol"),
3719 IPW2100_ORD(SYS_BOOT_TIME
, "Boot time"),
3720 IPW2100_ORD(STAT_RX_NO_BUFFER
,
3721 "rx frames rejected due to no buffer"),
3722 IPW2100_ORD(STAT_RX_MISSING_FRAG
,
3723 "rx frames dropped due to missing fragment"),
3724 IPW2100_ORD(STAT_RX_ORPHAN_FRAG
,
3725 "rx frames dropped due to non-sequential fragment"),
3726 IPW2100_ORD(STAT_RX_ORPHAN_FRAME
,
3727 "rx frames dropped due to unmatched 1st frame"),
3728 IPW2100_ORD(STAT_RX_FRAG_AGEOUT
,
3729 "rx frames dropped due to uncompleted frame"),
3730 IPW2100_ORD(STAT_RX_ICV_ERRORS
,
3731 "ICV errors during decryption"),
3732 IPW2100_ORD(STAT_PSP_SUSPENSION
, "times adapter suspended"),
3733 IPW2100_ORD(STAT_PSP_BCN_TIMEOUT
, "beacon timeout"),
3734 IPW2100_ORD(STAT_PSP_POLL_TIMEOUT
,
3735 "poll response timeouts"),
3736 IPW2100_ORD(STAT_PSP_NONDIR_TIMEOUT
,
3737 "timeouts waiting for last {broad,multi}cast pkt"),
3738 IPW2100_ORD(STAT_PSP_RX_DTIMS
, "PSP DTIMs received"),
3739 IPW2100_ORD(STAT_PSP_RX_TIMS
, "PSP TIMs received"),
3740 IPW2100_ORD(STAT_PSP_STATION_ID
, "PSP Station ID"),
3741 IPW2100_ORD(LAST_ASSN_TIME
, "RTC time of last association"),
3742 IPW2100_ORD(STAT_PERCENT_MISSED_BCNS
,
3743 "current calculation of % missed beacons"),
3744 IPW2100_ORD(STAT_PERCENT_RETRIES
,
3745 "current calculation of % missed tx retries"),
3746 IPW2100_ORD(ASSOCIATED_AP_PTR
,
3747 "0 if not associated, else pointer to AP table entry"),
3748 IPW2100_ORD(AVAILABLE_AP_CNT
,
3749 "AP's decsribed in the AP table"),
3750 IPW2100_ORD(AP_LIST_PTR
, "Ptr to list of available APs"),
3751 IPW2100_ORD(STAT_AP_ASSNS
, "associations"),
3752 IPW2100_ORD(STAT_ASSN_FAIL
, "association failures"),
3753 IPW2100_ORD(STAT_ASSN_RESP_FAIL
,
3754 "failures due to response fail"),
3755 IPW2100_ORD(STAT_FULL_SCANS
, "full scans"),
3756 IPW2100_ORD(CARD_DISABLED
, "Card Disabled"),
3757 IPW2100_ORD(STAT_ROAM_INHIBIT
,
3758 "times roaming was inhibited due to activity"),
3759 IPW2100_ORD(RSSI_AT_ASSN
,
3760 "RSSI of associated AP at time of association"),
3761 IPW2100_ORD(STAT_ASSN_CAUSE1
,
3762 "reassociation: no probe response or TX on hop"),
3763 IPW2100_ORD(STAT_ASSN_CAUSE2
,
3764 "reassociation: poor tx/rx quality"),
3765 IPW2100_ORD(STAT_ASSN_CAUSE3
,
3766 "reassociation: tx/rx quality (excessive AP load"),
3767 IPW2100_ORD(STAT_ASSN_CAUSE4
,
3768 "reassociation: AP RSSI level"),
3769 IPW2100_ORD(STAT_ASSN_CAUSE5
,
3770 "reassociations due to load leveling"),
3771 IPW2100_ORD(STAT_AUTH_FAIL
, "times authentication failed"),
3772 IPW2100_ORD(STAT_AUTH_RESP_FAIL
,
3773 "times authentication response failed"),
3774 IPW2100_ORD(STATION_TABLE_CNT
,
3775 "entries in association table"),
3776 IPW2100_ORD(RSSI_AVG_CURR
, "Current avg RSSI"),
3777 IPW2100_ORD(POWER_MGMT_MODE
, "Power mode - 0=CAM, 1=PSP"),
3778 IPW2100_ORD(COUNTRY_CODE
,
3779 "IEEE country code as recv'd from beacon"),
3780 IPW2100_ORD(COUNTRY_CHANNELS
,
3781 "channels supported by country"),
3782 IPW2100_ORD(RESET_CNT
, "adapter resets (warm)"),
3783 IPW2100_ORD(BEACON_INTERVAL
, "Beacon interval"),
3784 IPW2100_ORD(ANTENNA_DIVERSITY
,
3785 "TRUE if antenna diversity is disabled"),
3786 IPW2100_ORD(DTIM_PERIOD
, "beacon intervals between DTIMs"),
3787 IPW2100_ORD(OUR_FREQ
,
3788 "current radio freq lower digits - channel ID"),
3789 IPW2100_ORD(RTC_TIME
, "current RTC time"),
3790 IPW2100_ORD(PORT_TYPE
, "operating mode"),
3791 IPW2100_ORD(CURRENT_TX_RATE
, "current tx rate"),
3792 IPW2100_ORD(SUPPORTED_RATES
, "supported tx rates"),
3793 IPW2100_ORD(ATIM_WINDOW
, "current ATIM Window"),
3794 IPW2100_ORD(BASIC_RATES
, "basic tx rates"),
3795 IPW2100_ORD(NIC_HIGHEST_RATE
, "NIC highest tx rate"),
3796 IPW2100_ORD(AP_HIGHEST_RATE
, "AP highest tx rate"),
3797 IPW2100_ORD(CAPABILITIES
,
3798 "Management frame capability field"),
3799 IPW2100_ORD(AUTH_TYPE
, "Type of authentication"),
3800 IPW2100_ORD(RADIO_TYPE
, "Adapter card platform type"),
3801 IPW2100_ORD(RTS_THRESHOLD
,
3802 "Min packet length for RTS handshaking"),
3803 IPW2100_ORD(INT_MODE
, "International mode"),
3804 IPW2100_ORD(FRAGMENTATION_THRESHOLD
,
3805 "protocol frag threshold"),
3806 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_START_ADDRESS
,
3807 "EEPROM offset in SRAM"),
3808 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_SIZE
,
3809 "EEPROM size in SRAM"),
3810 IPW2100_ORD(EEPROM_SKU_CAPABILITY
, "EEPROM SKU Capability"),
3811 IPW2100_ORD(EEPROM_IBSS_11B_CHANNELS
,
3812 "EEPROM IBSS 11b channel set"),
3813 IPW2100_ORD(MAC_VERSION
, "MAC Version"),
3814 IPW2100_ORD(MAC_REVISION
, "MAC Revision"),
3815 IPW2100_ORD(RADIO_VERSION
, "Radio Version"),
3816 IPW2100_ORD(NIC_MANF_DATE_TIME
, "MANF Date/Time STAMP"),
3817 IPW2100_ORD(UCODE_VERSION
, "Ucode Version"),};
3819 static ssize_t
show_registers(struct device
*d
, struct device_attribute
*attr
,
3823 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3824 struct net_device
*dev
= priv
->net_dev
;
3828 out
+= sprintf(out
, "%30s [Address ] : Hex\n", "Register");
3830 for (i
= 0; i
< ARRAY_SIZE(hw_data
); i
++) {
3831 read_register(dev
, hw_data
[i
].addr
, &val
);
3832 out
+= sprintf(out
, "%30s [%08X] : %08X\n",
3833 hw_data
[i
].name
, hw_data
[i
].addr
, val
);
3839 static DEVICE_ATTR(registers
, S_IRUGO
, show_registers
, NULL
);
3841 static ssize_t
show_hardware(struct device
*d
, struct device_attribute
*attr
,
3844 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3845 struct net_device
*dev
= priv
->net_dev
;
3849 out
+= sprintf(out
, "%30s [Address ] : Hex\n", "NIC entry");
3851 for (i
= 0; i
< ARRAY_SIZE(nic_data
); i
++) {
3856 switch (nic_data
[i
].size
) {
3858 read_nic_byte(dev
, nic_data
[i
].addr
, &tmp8
);
3859 out
+= sprintf(out
, "%30s [%08X] : %02X\n",
3860 nic_data
[i
].name
, nic_data
[i
].addr
,
3864 read_nic_word(dev
, nic_data
[i
].addr
, &tmp16
);
3865 out
+= sprintf(out
, "%30s [%08X] : %04X\n",
3866 nic_data
[i
].name
, nic_data
[i
].addr
,
3870 read_nic_dword(dev
, nic_data
[i
].addr
, &tmp32
);
3871 out
+= sprintf(out
, "%30s [%08X] : %08X\n",
3872 nic_data
[i
].name
, nic_data
[i
].addr
,
3880 static DEVICE_ATTR(hardware
, S_IRUGO
, show_hardware
, NULL
);
3882 static ssize_t
show_memory(struct device
*d
, struct device_attribute
*attr
,
3885 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3886 struct net_device
*dev
= priv
->net_dev
;
3887 static unsigned long loop
= 0;
3893 if (loop
>= 0x30000)
3896 /* sysfs provides us PAGE_SIZE buffer */
3897 while (len
< PAGE_SIZE
- 128 && loop
< 0x30000) {
3899 if (priv
->snapshot
[0])
3900 for (i
= 0; i
< 4; i
++)
3902 *(u32
*) SNAPSHOT_ADDR(loop
+ i
* 4);
3904 for (i
= 0; i
< 4; i
++)
3905 read_nic_dword(dev
, loop
+ i
* 4, &buffer
[i
]);
3908 len
+= sprintf(buf
+ len
,
3913 ((u8
*) buffer
)[0x0],
3914 ((u8
*) buffer
)[0x1],
3915 ((u8
*) buffer
)[0x2],
3916 ((u8
*) buffer
)[0x3],
3917 ((u8
*) buffer
)[0x4],
3918 ((u8
*) buffer
)[0x5],
3919 ((u8
*) buffer
)[0x6],
3920 ((u8
*) buffer
)[0x7],
3921 ((u8
*) buffer
)[0x8],
3922 ((u8
*) buffer
)[0x9],
3923 ((u8
*) buffer
)[0xa],
3924 ((u8
*) buffer
)[0xb],
3925 ((u8
*) buffer
)[0xc],
3926 ((u8
*) buffer
)[0xd],
3927 ((u8
*) buffer
)[0xe],
3928 ((u8
*) buffer
)[0xf]);
3930 len
+= sprintf(buf
+ len
, "%s\n",
3931 snprint_line(line
, sizeof(line
),
3932 (u8
*) buffer
, 16, loop
));
3939 static ssize_t
store_memory(struct device
*d
, struct device_attribute
*attr
,
3940 const char *buf
, size_t count
)
3942 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3943 struct net_device
*dev
= priv
->net_dev
;
3944 const char *p
= buf
;
3946 (void)dev
; /* kill unused-var warning for debug-only code */
3952 (count
>= 2 && tolower(p
[0]) == 'o' && tolower(p
[1]) == 'n')) {
3953 IPW_DEBUG_INFO("%s: Setting memory dump to RAW mode.\n",
3957 } else if (p
[0] == '0' || (count
>= 2 && tolower(p
[0]) == 'o' &&
3958 tolower(p
[1]) == 'f')) {
3959 IPW_DEBUG_INFO("%s: Setting memory dump to HEX mode.\n",
3963 } else if (tolower(p
[0]) == 'r') {
3964 IPW_DEBUG_INFO("%s: Resetting firmware snapshot.\n", dev
->name
);
3965 ipw2100_snapshot_free(priv
);
3968 IPW_DEBUG_INFO("%s: Usage: 0|on = HEX, 1|off = RAW, "
3969 "reset = clear memory snapshot\n", dev
->name
);
3974 static DEVICE_ATTR(memory
, S_IWUSR
| S_IRUGO
, show_memory
, store_memory
);
3976 static ssize_t
show_ordinals(struct device
*d
, struct device_attribute
*attr
,
3979 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3983 static int loop
= 0;
3985 if (priv
->status
& STATUS_RF_KILL_MASK
)
3988 if (loop
>= ARRAY_SIZE(ord_data
))
3991 /* sysfs provides us PAGE_SIZE buffer */
3992 while (len
< PAGE_SIZE
- 128 && loop
< ARRAY_SIZE(ord_data
)) {
3993 val_len
= sizeof(u32
);
3995 if (ipw2100_get_ordinal(priv
, ord_data
[loop
].index
, &val
,
3997 len
+= sprintf(buf
+ len
, "[0x%02X] = ERROR %s\n",
3998 ord_data
[loop
].index
,
3999 ord_data
[loop
].desc
);
4001 len
+= sprintf(buf
+ len
, "[0x%02X] = 0x%08X %s\n",
4002 ord_data
[loop
].index
, val
,
4003 ord_data
[loop
].desc
);
4010 static DEVICE_ATTR(ordinals
, S_IRUGO
, show_ordinals
, NULL
);
4012 static ssize_t
show_stats(struct device
*d
, struct device_attribute
*attr
,
4015 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4018 out
+= sprintf(out
, "interrupts: %d {tx: %d, rx: %d, other: %d}\n",
4019 priv
->interrupts
, priv
->tx_interrupts
,
4020 priv
->rx_interrupts
, priv
->inta_other
);
4021 out
+= sprintf(out
, "firmware resets: %d\n", priv
->resets
);
4022 out
+= sprintf(out
, "firmware hangs: %d\n", priv
->hangs
);
4023 #ifdef CONFIG_IPW2100_DEBUG
4024 out
+= sprintf(out
, "packet mismatch image: %s\n",
4025 priv
->snapshot
[0] ? "YES" : "NO");
4031 static DEVICE_ATTR(stats
, S_IRUGO
, show_stats
, NULL
);
4033 static int ipw2100_switch_mode(struct ipw2100_priv
*priv
, u32 mode
)
4037 if (mode
== priv
->ieee
->iw_mode
)
4040 err
= ipw2100_disable_adapter(priv
);
4042 printk(KERN_ERR DRV_NAME
": %s: Could not disable adapter %d\n",
4043 priv
->net_dev
->name
, err
);
4049 priv
->net_dev
->type
= ARPHRD_ETHER
;
4052 priv
->net_dev
->type
= ARPHRD_ETHER
;
4054 #ifdef CONFIG_IPW2100_MONITOR
4055 case IW_MODE_MONITOR
:
4056 priv
->last_mode
= priv
->ieee
->iw_mode
;
4057 priv
->net_dev
->type
= ARPHRD_IEEE80211_RADIOTAP
;
4059 #endif /* CONFIG_IPW2100_MONITOR */
4062 priv
->ieee
->iw_mode
= mode
;
4065 /* Indicate ipw2100_download_firmware download firmware
4066 * from disk instead of memory. */
4067 ipw2100_firmware
.version
= 0;
4070 printk(KERN_INFO
"%s: Resetting on mode change.\n", priv
->net_dev
->name
);
4071 priv
->reset_backoff
= 0;
4072 schedule_reset(priv
);
4077 static ssize_t
show_internals(struct device
*d
, struct device_attribute
*attr
,
4080 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4083 #define DUMP_VAR(x,y) len += sprintf(buf + len, # x ": %" y "\n", priv-> x)
4085 if (priv
->status
& STATUS_ASSOCIATED
)
4086 len
+= sprintf(buf
+ len
, "connected: %lu\n",
4087 get_seconds() - priv
->connect_start
);
4089 len
+= sprintf(buf
+ len
, "not connected\n");
4091 DUMP_VAR(ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
], "p");
4092 DUMP_VAR(status
, "08lx");
4093 DUMP_VAR(config
, "08lx");
4094 DUMP_VAR(capability
, "08lx");
4097 sprintf(buf
+ len
, "last_rtc: %lu\n",
4098 (unsigned long)priv
->last_rtc
);
4100 DUMP_VAR(fatal_error
, "d");
4101 DUMP_VAR(stop_hang_check
, "d");
4102 DUMP_VAR(stop_rf_kill
, "d");
4103 DUMP_VAR(messages_sent
, "d");
4105 DUMP_VAR(tx_pend_stat
.value
, "d");
4106 DUMP_VAR(tx_pend_stat
.hi
, "d");
4108 DUMP_VAR(tx_free_stat
.value
, "d");
4109 DUMP_VAR(tx_free_stat
.lo
, "d");
4111 DUMP_VAR(msg_free_stat
.value
, "d");
4112 DUMP_VAR(msg_free_stat
.lo
, "d");
4114 DUMP_VAR(msg_pend_stat
.value
, "d");
4115 DUMP_VAR(msg_pend_stat
.hi
, "d");
4117 DUMP_VAR(fw_pend_stat
.value
, "d");
4118 DUMP_VAR(fw_pend_stat
.hi
, "d");
4120 DUMP_VAR(txq_stat
.value
, "d");
4121 DUMP_VAR(txq_stat
.lo
, "d");
4123 DUMP_VAR(ieee
->scans
, "d");
4124 DUMP_VAR(reset_backoff
, "d");
4129 static DEVICE_ATTR(internals
, S_IRUGO
, show_internals
, NULL
);
4131 static ssize_t
show_bssinfo(struct device
*d
, struct device_attribute
*attr
,
4134 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4135 char essid
[IW_ESSID_MAX_SIZE
+ 1];
4139 unsigned int length
;
4142 if (priv
->status
& STATUS_RF_KILL_MASK
)
4145 memset(essid
, 0, sizeof(essid
));
4146 memset(bssid
, 0, sizeof(bssid
));
4148 length
= IW_ESSID_MAX_SIZE
;
4149 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_SSID
, essid
, &length
);
4151 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4154 length
= sizeof(bssid
);
4155 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
,
4158 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4161 length
= sizeof(u32
);
4162 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_OUR_FREQ
, &chan
, &length
);
4164 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4167 out
+= sprintf(out
, "ESSID: %s\n", essid
);
4168 out
+= sprintf(out
, "BSSID: %pM\n", bssid
);
4169 out
+= sprintf(out
, "Channel: %d\n", chan
);
4174 static DEVICE_ATTR(bssinfo
, S_IRUGO
, show_bssinfo
, NULL
);
4176 #ifdef CONFIG_IPW2100_DEBUG
4177 static ssize_t
show_debug_level(struct device_driver
*d
, char *buf
)
4179 return sprintf(buf
, "0x%08X\n", ipw2100_debug_level
);
4182 static ssize_t
store_debug_level(struct device_driver
*d
,
4183 const char *buf
, size_t count
)
4185 char *p
= (char *)buf
;
4188 if (p
[1] == 'x' || p
[1] == 'X' || p
[0] == 'x' || p
[0] == 'X') {
4190 if (p
[0] == 'x' || p
[0] == 'X')
4192 val
= simple_strtoul(p
, &p
, 16);
4194 val
= simple_strtoul(p
, &p
, 10);
4196 IPW_DEBUG_INFO(": %s is not in hex or decimal form.\n", buf
);
4198 ipw2100_debug_level
= val
;
4200 return strnlen(buf
, count
);
4203 static DRIVER_ATTR(debug_level
, S_IWUSR
| S_IRUGO
, show_debug_level
,
4205 #endif /* CONFIG_IPW2100_DEBUG */
4207 static ssize_t
show_fatal_error(struct device
*d
,
4208 struct device_attribute
*attr
, char *buf
)
4210 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4214 if (priv
->fatal_error
)
4215 out
+= sprintf(out
, "0x%08X\n", priv
->fatal_error
);
4217 out
+= sprintf(out
, "0\n");
4219 for (i
= 1; i
<= IPW2100_ERROR_QUEUE
; i
++) {
4220 if (!priv
->fatal_errors
[(priv
->fatal_index
- i
) %
4221 IPW2100_ERROR_QUEUE
])
4224 out
+= sprintf(out
, "%d. 0x%08X\n", i
,
4225 priv
->fatal_errors
[(priv
->fatal_index
- i
) %
4226 IPW2100_ERROR_QUEUE
]);
4232 static ssize_t
store_fatal_error(struct device
*d
,
4233 struct device_attribute
*attr
, const char *buf
,
4236 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4237 schedule_reset(priv
);
4241 static DEVICE_ATTR(fatal_error
, S_IWUSR
| S_IRUGO
, show_fatal_error
,
4244 static ssize_t
show_scan_age(struct device
*d
, struct device_attribute
*attr
,
4247 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4248 return sprintf(buf
, "%d\n", priv
->ieee
->scan_age
);
4251 static ssize_t
store_scan_age(struct device
*d
, struct device_attribute
*attr
,
4252 const char *buf
, size_t count
)
4254 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4255 struct net_device
*dev
= priv
->net_dev
;
4256 char buffer
[] = "00000000";
4258 (sizeof(buffer
) - 1) > count
? count
: sizeof(buffer
) - 1;
4262 (void)dev
; /* kill unused-var warning for debug-only code */
4264 IPW_DEBUG_INFO("enter\n");
4266 strncpy(buffer
, buf
, len
);
4269 if (p
[1] == 'x' || p
[1] == 'X' || p
[0] == 'x' || p
[0] == 'X') {
4271 if (p
[0] == 'x' || p
[0] == 'X')
4273 val
= simple_strtoul(p
, &p
, 16);
4275 val
= simple_strtoul(p
, &p
, 10);
4277 IPW_DEBUG_INFO("%s: user supplied invalid value.\n", dev
->name
);
4279 priv
->ieee
->scan_age
= val
;
4280 IPW_DEBUG_INFO("set scan_age = %u\n", priv
->ieee
->scan_age
);
4283 IPW_DEBUG_INFO("exit\n");
4287 static DEVICE_ATTR(scan_age
, S_IWUSR
| S_IRUGO
, show_scan_age
, store_scan_age
);
4289 static ssize_t
show_rf_kill(struct device
*d
, struct device_attribute
*attr
,
4292 /* 0 - RF kill not enabled
4293 1 - SW based RF kill active (sysfs)
4294 2 - HW based RF kill active
4295 3 - Both HW and SW baed RF kill active */
4296 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4297 int val
= ((priv
->status
& STATUS_RF_KILL_SW
) ? 0x1 : 0x0) |
4298 (rf_kill_active(priv
) ? 0x2 : 0x0);
4299 return sprintf(buf
, "%i\n", val
);
4302 static int ipw_radio_kill_sw(struct ipw2100_priv
*priv
, int disable_radio
)
4304 if ((disable_radio
? 1 : 0) ==
4305 (priv
->status
& STATUS_RF_KILL_SW
? 1 : 0))
4308 IPW_DEBUG_RF_KILL("Manual SW RF Kill set to: RADIO %s\n",
4309 disable_radio
? "OFF" : "ON");
4311 mutex_lock(&priv
->action_mutex
);
4313 if (disable_radio
) {
4314 priv
->status
|= STATUS_RF_KILL_SW
;
4317 priv
->status
&= ~STATUS_RF_KILL_SW
;
4318 if (rf_kill_active(priv
)) {
4319 IPW_DEBUG_RF_KILL("Can not turn radio back on - "
4320 "disabled by HW switch\n");
4321 /* Make sure the RF_KILL check timer is running */
4322 priv
->stop_rf_kill
= 0;
4323 mod_delayed_work(system_wq
, &priv
->rf_kill
,
4324 round_jiffies_relative(HZ
));
4326 schedule_reset(priv
);
4329 mutex_unlock(&priv
->action_mutex
);
4333 static ssize_t
store_rf_kill(struct device
*d
, struct device_attribute
*attr
,
4334 const char *buf
, size_t count
)
4336 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4337 ipw_radio_kill_sw(priv
, buf
[0] == '1');
4341 static DEVICE_ATTR(rf_kill
, S_IWUSR
| S_IRUGO
, show_rf_kill
, store_rf_kill
);
4343 static struct attribute
*ipw2100_sysfs_entries
[] = {
4344 &dev_attr_hardware
.attr
,
4345 &dev_attr_registers
.attr
,
4346 &dev_attr_ordinals
.attr
,
4348 &dev_attr_stats
.attr
,
4349 &dev_attr_internals
.attr
,
4350 &dev_attr_bssinfo
.attr
,
4351 &dev_attr_memory
.attr
,
4352 &dev_attr_scan_age
.attr
,
4353 &dev_attr_fatal_error
.attr
,
4354 &dev_attr_rf_kill
.attr
,
4356 &dev_attr_status
.attr
,
4357 &dev_attr_capability
.attr
,
4361 static struct attribute_group ipw2100_attribute_group
= {
4362 .attrs
= ipw2100_sysfs_entries
,
4365 static int status_queue_allocate(struct ipw2100_priv
*priv
, int entries
)
4367 struct ipw2100_status_queue
*q
= &priv
->status_queue
;
4369 IPW_DEBUG_INFO("enter\n");
4371 q
->size
= entries
* sizeof(struct ipw2100_status
);
4373 (struct ipw2100_status
*)pci_alloc_consistent(priv
->pci_dev
,
4376 IPW_DEBUG_WARNING("Can not allocate status queue.\n");
4380 memset(q
->drv
, 0, q
->size
);
4382 IPW_DEBUG_INFO("exit\n");
4387 static void status_queue_free(struct ipw2100_priv
*priv
)
4389 IPW_DEBUG_INFO("enter\n");
4391 if (priv
->status_queue
.drv
) {
4392 pci_free_consistent(priv
->pci_dev
, priv
->status_queue
.size
,
4393 priv
->status_queue
.drv
,
4394 priv
->status_queue
.nic
);
4395 priv
->status_queue
.drv
= NULL
;
4398 IPW_DEBUG_INFO("exit\n");
4401 static int bd_queue_allocate(struct ipw2100_priv
*priv
,
4402 struct ipw2100_bd_queue
*q
, int entries
)
4404 IPW_DEBUG_INFO("enter\n");
4406 memset(q
, 0, sizeof(struct ipw2100_bd_queue
));
4408 q
->entries
= entries
;
4409 q
->size
= entries
* sizeof(struct ipw2100_bd
);
4410 q
->drv
= pci_alloc_consistent(priv
->pci_dev
, q
->size
, &q
->nic
);
4413 ("can't allocate shared memory for buffer descriptors\n");
4416 memset(q
->drv
, 0, q
->size
);
4418 IPW_DEBUG_INFO("exit\n");
4423 static void bd_queue_free(struct ipw2100_priv
*priv
, struct ipw2100_bd_queue
*q
)
4425 IPW_DEBUG_INFO("enter\n");
4431 pci_free_consistent(priv
->pci_dev
, q
->size
, q
->drv
, q
->nic
);
4435 IPW_DEBUG_INFO("exit\n");
4438 static void bd_queue_initialize(struct ipw2100_priv
*priv
,
4439 struct ipw2100_bd_queue
*q
, u32 base
, u32 size
,
4442 IPW_DEBUG_INFO("enter\n");
4444 IPW_DEBUG_INFO("initializing bd queue at virt=%p, phys=%08x\n", q
->drv
,
4447 write_register(priv
->net_dev
, base
, q
->nic
);
4448 write_register(priv
->net_dev
, size
, q
->entries
);
4449 write_register(priv
->net_dev
, r
, q
->oldest
);
4450 write_register(priv
->net_dev
, w
, q
->next
);
4452 IPW_DEBUG_INFO("exit\n");
4455 static void ipw2100_kill_works(struct ipw2100_priv
*priv
)
4457 priv
->stop_rf_kill
= 1;
4458 priv
->stop_hang_check
= 1;
4459 cancel_delayed_work_sync(&priv
->reset_work
);
4460 cancel_delayed_work_sync(&priv
->security_work
);
4461 cancel_delayed_work_sync(&priv
->wx_event_work
);
4462 cancel_delayed_work_sync(&priv
->hang_check
);
4463 cancel_delayed_work_sync(&priv
->rf_kill
);
4464 cancel_work_sync(&priv
->scan_event_now
);
4465 cancel_delayed_work_sync(&priv
->scan_event_later
);
4468 static int ipw2100_tx_allocate(struct ipw2100_priv
*priv
)
4470 int i
, j
, err
= -EINVAL
;
4474 IPW_DEBUG_INFO("enter\n");
4476 err
= bd_queue_allocate(priv
, &priv
->tx_queue
, TX_QUEUE_LENGTH
);
4478 IPW_DEBUG_ERROR("%s: failed bd_queue_allocate\n",
4479 priv
->net_dev
->name
);
4484 kmalloc(TX_PENDED_QUEUE_LENGTH
* sizeof(struct ipw2100_tx_packet
),
4486 if (!priv
->tx_buffers
) {
4487 printk(KERN_ERR DRV_NAME
4488 ": %s: alloc failed form tx buffers.\n",
4489 priv
->net_dev
->name
);
4490 bd_queue_free(priv
, &priv
->tx_queue
);
4494 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4495 v
= pci_alloc_consistent(priv
->pci_dev
,
4496 sizeof(struct ipw2100_data_header
),
4499 printk(KERN_ERR DRV_NAME
4500 ": %s: PCI alloc failed for tx " "buffers.\n",
4501 priv
->net_dev
->name
);
4506 priv
->tx_buffers
[i
].type
= DATA
;
4507 priv
->tx_buffers
[i
].info
.d_struct
.data
=
4508 (struct ipw2100_data_header
*)v
;
4509 priv
->tx_buffers
[i
].info
.d_struct
.data_phys
= p
;
4510 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4513 if (i
== TX_PENDED_QUEUE_LENGTH
)
4516 for (j
= 0; j
< i
; j
++) {
4517 pci_free_consistent(priv
->pci_dev
,
4518 sizeof(struct ipw2100_data_header
),
4519 priv
->tx_buffers
[j
].info
.d_struct
.data
,
4520 priv
->tx_buffers
[j
].info
.d_struct
.
4524 kfree(priv
->tx_buffers
);
4525 priv
->tx_buffers
= NULL
;
4530 static void ipw2100_tx_initialize(struct ipw2100_priv
*priv
)
4534 IPW_DEBUG_INFO("enter\n");
4537 * reinitialize packet info lists
4539 INIT_LIST_HEAD(&priv
->fw_pend_list
);
4540 INIT_STAT(&priv
->fw_pend_stat
);
4543 * reinitialize lists
4545 INIT_LIST_HEAD(&priv
->tx_pend_list
);
4546 INIT_LIST_HEAD(&priv
->tx_free_list
);
4547 INIT_STAT(&priv
->tx_pend_stat
);
4548 INIT_STAT(&priv
->tx_free_stat
);
4550 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4551 /* We simply drop any SKBs that have been queued for
4553 if (priv
->tx_buffers
[i
].info
.d_struct
.txb
) {
4554 libipw_txb_free(priv
->tx_buffers
[i
].info
.d_struct
.
4556 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4559 list_add_tail(&priv
->tx_buffers
[i
].list
, &priv
->tx_free_list
);
4562 SET_STAT(&priv
->tx_free_stat
, i
);
4564 priv
->tx_queue
.oldest
= 0;
4565 priv
->tx_queue
.available
= priv
->tx_queue
.entries
;
4566 priv
->tx_queue
.next
= 0;
4567 INIT_STAT(&priv
->txq_stat
);
4568 SET_STAT(&priv
->txq_stat
, priv
->tx_queue
.available
);
4570 bd_queue_initialize(priv
, &priv
->tx_queue
,
4571 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE
,
4572 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE
,
4573 IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX
,
4574 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
);
4576 IPW_DEBUG_INFO("exit\n");
4580 static void ipw2100_tx_free(struct ipw2100_priv
*priv
)
4584 IPW_DEBUG_INFO("enter\n");
4586 bd_queue_free(priv
, &priv
->tx_queue
);
4588 if (!priv
->tx_buffers
)
4591 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4592 if (priv
->tx_buffers
[i
].info
.d_struct
.txb
) {
4593 libipw_txb_free(priv
->tx_buffers
[i
].info
.d_struct
.
4595 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4597 if (priv
->tx_buffers
[i
].info
.d_struct
.data
)
4598 pci_free_consistent(priv
->pci_dev
,
4599 sizeof(struct ipw2100_data_header
),
4600 priv
->tx_buffers
[i
].info
.d_struct
.
4602 priv
->tx_buffers
[i
].info
.d_struct
.
4606 kfree(priv
->tx_buffers
);
4607 priv
->tx_buffers
= NULL
;
4609 IPW_DEBUG_INFO("exit\n");
4612 static int ipw2100_rx_allocate(struct ipw2100_priv
*priv
)
4614 int i
, j
, err
= -EINVAL
;
4616 IPW_DEBUG_INFO("enter\n");
4618 err
= bd_queue_allocate(priv
, &priv
->rx_queue
, RX_QUEUE_LENGTH
);
4620 IPW_DEBUG_INFO("failed bd_queue_allocate\n");
4624 err
= status_queue_allocate(priv
, RX_QUEUE_LENGTH
);
4626 IPW_DEBUG_INFO("failed status_queue_allocate\n");
4627 bd_queue_free(priv
, &priv
->rx_queue
);
4634 priv
->rx_buffers
= kmalloc(RX_QUEUE_LENGTH
*
4635 sizeof(struct ipw2100_rx_packet
),
4637 if (!priv
->rx_buffers
) {
4638 IPW_DEBUG_INFO("can't allocate rx packet buffer table\n");
4640 bd_queue_free(priv
, &priv
->rx_queue
);
4642 status_queue_free(priv
);
4647 for (i
= 0; i
< RX_QUEUE_LENGTH
; i
++) {
4648 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
4650 err
= ipw2100_alloc_skb(priv
, packet
);
4651 if (unlikely(err
)) {
4656 /* The BD holds the cache aligned address */
4657 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
4658 priv
->rx_queue
.drv
[i
].buf_length
= IPW_RX_NIC_BUFFER_LENGTH
;
4659 priv
->status_queue
.drv
[i
].status_fields
= 0;
4662 if (i
== RX_QUEUE_LENGTH
)
4665 for (j
= 0; j
< i
; j
++) {
4666 pci_unmap_single(priv
->pci_dev
, priv
->rx_buffers
[j
].dma_addr
,
4667 sizeof(struct ipw2100_rx_packet
),
4668 PCI_DMA_FROMDEVICE
);
4669 dev_kfree_skb(priv
->rx_buffers
[j
].skb
);
4672 kfree(priv
->rx_buffers
);
4673 priv
->rx_buffers
= NULL
;
4675 bd_queue_free(priv
, &priv
->rx_queue
);
4677 status_queue_free(priv
);
4682 static void ipw2100_rx_initialize(struct ipw2100_priv
*priv
)
4684 IPW_DEBUG_INFO("enter\n");
4686 priv
->rx_queue
.oldest
= 0;
4687 priv
->rx_queue
.available
= priv
->rx_queue
.entries
- 1;
4688 priv
->rx_queue
.next
= priv
->rx_queue
.entries
- 1;
4690 INIT_STAT(&priv
->rxq_stat
);
4691 SET_STAT(&priv
->rxq_stat
, priv
->rx_queue
.available
);
4693 bd_queue_initialize(priv
, &priv
->rx_queue
,
4694 IPW_MEM_HOST_SHARED_RX_BD_BASE
,
4695 IPW_MEM_HOST_SHARED_RX_BD_SIZE
,
4696 IPW_MEM_HOST_SHARED_RX_READ_INDEX
,
4697 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
);
4699 /* set up the status queue */
4700 write_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_STATUS_BASE
,
4701 priv
->status_queue
.nic
);
4703 IPW_DEBUG_INFO("exit\n");
4706 static void ipw2100_rx_free(struct ipw2100_priv
*priv
)
4710 IPW_DEBUG_INFO("enter\n");
4712 bd_queue_free(priv
, &priv
->rx_queue
);
4713 status_queue_free(priv
);
4715 if (!priv
->rx_buffers
)
4718 for (i
= 0; i
< RX_QUEUE_LENGTH
; i
++) {
4719 if (priv
->rx_buffers
[i
].rxp
) {
4720 pci_unmap_single(priv
->pci_dev
,
4721 priv
->rx_buffers
[i
].dma_addr
,
4722 sizeof(struct ipw2100_rx
),
4723 PCI_DMA_FROMDEVICE
);
4724 dev_kfree_skb(priv
->rx_buffers
[i
].skb
);
4728 kfree(priv
->rx_buffers
);
4729 priv
->rx_buffers
= NULL
;
4731 IPW_DEBUG_INFO("exit\n");
4734 static int ipw2100_read_mac_address(struct ipw2100_priv
*priv
)
4736 u32 length
= ETH_ALEN
;
4741 err
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ADAPTER_MAC
, addr
, &length
);
4743 IPW_DEBUG_INFO("MAC address read failed\n");
4747 memcpy(priv
->net_dev
->dev_addr
, addr
, ETH_ALEN
);
4748 IPW_DEBUG_INFO("card MAC is %pM\n", priv
->net_dev
->dev_addr
);
4753 /********************************************************************
4757 ********************************************************************/
4759 static int ipw2100_set_mac_address(struct ipw2100_priv
*priv
, int batch_mode
)
4761 struct host_command cmd
= {
4762 .host_command
= ADAPTER_ADDRESS
,
4763 .host_command_sequence
= 0,
4764 .host_command_length
= ETH_ALEN
4768 IPW_DEBUG_HC("SET_MAC_ADDRESS\n");
4770 IPW_DEBUG_INFO("enter\n");
4772 if (priv
->config
& CFG_CUSTOM_MAC
) {
4773 memcpy(cmd
.host_command_parameters
, priv
->mac_addr
, ETH_ALEN
);
4774 memcpy(priv
->net_dev
->dev_addr
, priv
->mac_addr
, ETH_ALEN
);
4776 memcpy(cmd
.host_command_parameters
, priv
->net_dev
->dev_addr
,
4779 err
= ipw2100_hw_send_command(priv
, &cmd
);
4781 IPW_DEBUG_INFO("exit\n");
4785 static int ipw2100_set_port_type(struct ipw2100_priv
*priv
, u32 port_type
,
4788 struct host_command cmd
= {
4789 .host_command
= PORT_TYPE
,
4790 .host_command_sequence
= 0,
4791 .host_command_length
= sizeof(u32
)
4795 switch (port_type
) {
4797 cmd
.host_command_parameters
[0] = IPW_BSS
;
4800 cmd
.host_command_parameters
[0] = IPW_IBSS
;
4804 IPW_DEBUG_HC("PORT_TYPE: %s\n",
4805 port_type
== IPW_IBSS
? "Ad-Hoc" : "Managed");
4808 err
= ipw2100_disable_adapter(priv
);
4810 printk(KERN_ERR DRV_NAME
4811 ": %s: Could not disable adapter %d\n",
4812 priv
->net_dev
->name
, err
);
4817 /* send cmd to firmware */
4818 err
= ipw2100_hw_send_command(priv
, &cmd
);
4821 ipw2100_enable_adapter(priv
);
4826 static int ipw2100_set_channel(struct ipw2100_priv
*priv
, u32 channel
,
4829 struct host_command cmd
= {
4830 .host_command
= CHANNEL
,
4831 .host_command_sequence
= 0,
4832 .host_command_length
= sizeof(u32
)
4836 cmd
.host_command_parameters
[0] = channel
;
4838 IPW_DEBUG_HC("CHANNEL: %d\n", channel
);
4840 /* If BSS then we don't support channel selection */
4841 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
)
4844 if ((channel
!= 0) &&
4845 ((channel
< REG_MIN_CHANNEL
) || (channel
> REG_MAX_CHANNEL
)))
4849 err
= ipw2100_disable_adapter(priv
);
4854 err
= ipw2100_hw_send_command(priv
, &cmd
);
4856 IPW_DEBUG_INFO("Failed to set channel to %d", channel
);
4861 priv
->config
|= CFG_STATIC_CHANNEL
;
4863 priv
->config
&= ~CFG_STATIC_CHANNEL
;
4865 priv
->channel
= channel
;
4868 err
= ipw2100_enable_adapter(priv
);
4876 static int ipw2100_system_config(struct ipw2100_priv
*priv
, int batch_mode
)
4878 struct host_command cmd
= {
4879 .host_command
= SYSTEM_CONFIG
,
4880 .host_command_sequence
= 0,
4881 .host_command_length
= 12,
4883 u32 ibss_mask
, len
= sizeof(u32
);
4886 /* Set system configuration */
4889 err
= ipw2100_disable_adapter(priv
);
4894 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
)
4895 cmd
.host_command_parameters
[0] |= IPW_CFG_IBSS_AUTO_START
;
4897 cmd
.host_command_parameters
[0] |= IPW_CFG_IBSS_MASK
|
4898 IPW_CFG_BSS_MASK
| IPW_CFG_802_1x_ENABLE
;
4900 if (!(priv
->config
& CFG_LONG_PREAMBLE
))
4901 cmd
.host_command_parameters
[0] |= IPW_CFG_PREAMBLE_AUTO
;
4903 err
= ipw2100_get_ordinal(priv
,
4904 IPW_ORD_EEPROM_IBSS_11B_CHANNELS
,
4907 ibss_mask
= IPW_IBSS_11B_DEFAULT_MASK
;
4909 cmd
.host_command_parameters
[1] = REG_CHANNEL_MASK
;
4910 cmd
.host_command_parameters
[2] = REG_CHANNEL_MASK
& ibss_mask
;
4913 /*cmd.host_command_parameters[0] |= DIVERSITY_ANTENNA_A; */
4915 err
= ipw2100_hw_send_command(priv
, &cmd
);
4919 /* If IPv6 is configured in the kernel then we don't want to filter out all
4920 * of the multicast packets as IPv6 needs some. */
4921 #if !defined(CONFIG_IPV6) && !defined(CONFIG_IPV6_MODULE)
4922 cmd
.host_command
= ADD_MULTICAST
;
4923 cmd
.host_command_sequence
= 0;
4924 cmd
.host_command_length
= 0;
4926 ipw2100_hw_send_command(priv
, &cmd
);
4929 err
= ipw2100_enable_adapter(priv
);
4937 static int ipw2100_set_tx_rates(struct ipw2100_priv
*priv
, u32 rate
,
4940 struct host_command cmd
= {
4941 .host_command
= BASIC_TX_RATES
,
4942 .host_command_sequence
= 0,
4943 .host_command_length
= 4
4947 cmd
.host_command_parameters
[0] = rate
& TX_RATE_MASK
;
4950 err
= ipw2100_disable_adapter(priv
);
4955 /* Set BASIC TX Rate first */
4956 ipw2100_hw_send_command(priv
, &cmd
);
4959 cmd
.host_command
= TX_RATES
;
4960 ipw2100_hw_send_command(priv
, &cmd
);
4962 /* Set MSDU TX Rate */
4963 cmd
.host_command
= MSDU_TX_RATES
;
4964 ipw2100_hw_send_command(priv
, &cmd
);
4967 err
= ipw2100_enable_adapter(priv
);
4972 priv
->tx_rates
= rate
;
4977 static int ipw2100_set_power_mode(struct ipw2100_priv
*priv
, int power_level
)
4979 struct host_command cmd
= {
4980 .host_command
= POWER_MODE
,
4981 .host_command_sequence
= 0,
4982 .host_command_length
= 4
4986 cmd
.host_command_parameters
[0] = power_level
;
4988 err
= ipw2100_hw_send_command(priv
, &cmd
);
4992 if (power_level
== IPW_POWER_MODE_CAM
)
4993 priv
->power_mode
= IPW_POWER_LEVEL(priv
->power_mode
);
4995 priv
->power_mode
= IPW_POWER_ENABLED
| power_level
;
4997 #ifdef IPW2100_TX_POWER
4998 if (priv
->port_type
== IBSS
&& priv
->adhoc_power
!= DFTL_IBSS_TX_POWER
) {
4999 /* Set beacon interval */
5000 cmd
.host_command
= TX_POWER_INDEX
;
5001 cmd
.host_command_parameters
[0] = (u32
) priv
->adhoc_power
;
5003 err
= ipw2100_hw_send_command(priv
, &cmd
);
5012 static int ipw2100_set_rts_threshold(struct ipw2100_priv
*priv
, u32 threshold
)
5014 struct host_command cmd
= {
5015 .host_command
= RTS_THRESHOLD
,
5016 .host_command_sequence
= 0,
5017 .host_command_length
= 4
5021 if (threshold
& RTS_DISABLED
)
5022 cmd
.host_command_parameters
[0] = MAX_RTS_THRESHOLD
;
5024 cmd
.host_command_parameters
[0] = threshold
& ~RTS_DISABLED
;
5026 err
= ipw2100_hw_send_command(priv
, &cmd
);
5030 priv
->rts_threshold
= threshold
;
5036 int ipw2100_set_fragmentation_threshold(struct ipw2100_priv
*priv
,
5037 u32 threshold
, int batch_mode
)
5039 struct host_command cmd
= {
5040 .host_command
= FRAG_THRESHOLD
,
5041 .host_command_sequence
= 0,
5042 .host_command_length
= 4,
5043 .host_command_parameters
[0] = 0,
5048 err
= ipw2100_disable_adapter(priv
);
5054 threshold
= DEFAULT_FRAG_THRESHOLD
;
5056 threshold
= max(threshold
, MIN_FRAG_THRESHOLD
);
5057 threshold
= min(threshold
, MAX_FRAG_THRESHOLD
);
5060 cmd
.host_command_parameters
[0] = threshold
;
5062 IPW_DEBUG_HC("FRAG_THRESHOLD: %u\n", threshold
);
5064 err
= ipw2100_hw_send_command(priv
, &cmd
);
5067 ipw2100_enable_adapter(priv
);
5070 priv
->frag_threshold
= threshold
;
5076 static int ipw2100_set_short_retry(struct ipw2100_priv
*priv
, u32 retry
)
5078 struct host_command cmd
= {
5079 .host_command
= SHORT_RETRY_LIMIT
,
5080 .host_command_sequence
= 0,
5081 .host_command_length
= 4
5085 cmd
.host_command_parameters
[0] = retry
;
5087 err
= ipw2100_hw_send_command(priv
, &cmd
);
5091 priv
->short_retry_limit
= retry
;
5096 static int ipw2100_set_long_retry(struct ipw2100_priv
*priv
, u32 retry
)
5098 struct host_command cmd
= {
5099 .host_command
= LONG_RETRY_LIMIT
,
5100 .host_command_sequence
= 0,
5101 .host_command_length
= 4
5105 cmd
.host_command_parameters
[0] = retry
;
5107 err
= ipw2100_hw_send_command(priv
, &cmd
);
5111 priv
->long_retry_limit
= retry
;
5116 static int ipw2100_set_mandatory_bssid(struct ipw2100_priv
*priv
, u8
* bssid
,
5119 struct host_command cmd
= {
5120 .host_command
= MANDATORY_BSSID
,
5121 .host_command_sequence
= 0,
5122 .host_command_length
= (bssid
== NULL
) ? 0 : ETH_ALEN
5126 #ifdef CONFIG_IPW2100_DEBUG
5128 IPW_DEBUG_HC("MANDATORY_BSSID: %pM\n", bssid
);
5130 IPW_DEBUG_HC("MANDATORY_BSSID: <clear>\n");
5132 /* if BSSID is empty then we disable mandatory bssid mode */
5134 memcpy(cmd
.host_command_parameters
, bssid
, ETH_ALEN
);
5137 err
= ipw2100_disable_adapter(priv
);
5142 err
= ipw2100_hw_send_command(priv
, &cmd
);
5145 ipw2100_enable_adapter(priv
);
5150 static int ipw2100_disassociate_bssid(struct ipw2100_priv
*priv
)
5152 struct host_command cmd
= {
5153 .host_command
= DISASSOCIATION_BSSID
,
5154 .host_command_sequence
= 0,
5155 .host_command_length
= ETH_ALEN
5160 IPW_DEBUG_HC("DISASSOCIATION_BSSID\n");
5163 /* The Firmware currently ignores the BSSID and just disassociates from
5164 * the currently associated AP -- but in the off chance that a future
5165 * firmware does use the BSSID provided here, we go ahead and try and
5166 * set it to the currently associated AP's BSSID */
5167 memcpy(cmd
.host_command_parameters
, priv
->bssid
, ETH_ALEN
);
5169 err
= ipw2100_hw_send_command(priv
, &cmd
);
5174 static int ipw2100_set_wpa_ie(struct ipw2100_priv
*,
5175 struct ipw2100_wpa_assoc_frame
*, int)
5176 __attribute__ ((unused
));
5178 static int ipw2100_set_wpa_ie(struct ipw2100_priv
*priv
,
5179 struct ipw2100_wpa_assoc_frame
*wpa_frame
,
5182 struct host_command cmd
= {
5183 .host_command
= SET_WPA_IE
,
5184 .host_command_sequence
= 0,
5185 .host_command_length
= sizeof(struct ipw2100_wpa_assoc_frame
),
5189 IPW_DEBUG_HC("SET_WPA_IE\n");
5192 err
= ipw2100_disable_adapter(priv
);
5197 memcpy(cmd
.host_command_parameters
, wpa_frame
,
5198 sizeof(struct ipw2100_wpa_assoc_frame
));
5200 err
= ipw2100_hw_send_command(priv
, &cmd
);
5203 if (ipw2100_enable_adapter(priv
))
5210 struct security_info_params
{
5211 u32 allowed_ciphers
;
5214 u8 replay_counters_number
;
5215 u8 unicast_using_group
;
5218 static int ipw2100_set_security_information(struct ipw2100_priv
*priv
,
5221 int unicast_using_group
,
5224 struct host_command cmd
= {
5225 .host_command
= SET_SECURITY_INFORMATION
,
5226 .host_command_sequence
= 0,
5227 .host_command_length
= sizeof(struct security_info_params
)
5229 struct security_info_params
*security
=
5230 (struct security_info_params
*)&cmd
.host_command_parameters
;
5232 memset(security
, 0, sizeof(*security
));
5234 /* If shared key AP authentication is turned on, then we need to
5235 * configure the firmware to try and use it.
5237 * Actual data encryption/decryption is handled by the host. */
5238 security
->auth_mode
= auth_mode
;
5239 security
->unicast_using_group
= unicast_using_group
;
5241 switch (security_level
) {
5244 security
->allowed_ciphers
= IPW_NONE_CIPHER
;
5247 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5251 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5252 IPW_WEP104_CIPHER
| IPW_TKIP_CIPHER
;
5254 case SEC_LEVEL_2_CKIP
:
5255 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5256 IPW_WEP104_CIPHER
| IPW_CKIP_CIPHER
;
5259 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5260 IPW_WEP104_CIPHER
| IPW_TKIP_CIPHER
| IPW_CCMP_CIPHER
;
5265 ("SET_SECURITY_INFORMATION: auth:%d cipher:0x%02X (level %d)\n",
5266 security
->auth_mode
, security
->allowed_ciphers
, security_level
);
5268 security
->replay_counters_number
= 0;
5271 err
= ipw2100_disable_adapter(priv
);
5276 err
= ipw2100_hw_send_command(priv
, &cmd
);
5279 ipw2100_enable_adapter(priv
);
5284 static int ipw2100_set_tx_power(struct ipw2100_priv
*priv
, u32 tx_power
)
5286 struct host_command cmd
= {
5287 .host_command
= TX_POWER_INDEX
,
5288 .host_command_sequence
= 0,
5289 .host_command_length
= 4
5294 if (tx_power
!= IPW_TX_POWER_DEFAULT
)
5295 tmp
= (tx_power
- IPW_TX_POWER_MIN_DBM
) * 16 /
5296 (IPW_TX_POWER_MAX_DBM
- IPW_TX_POWER_MIN_DBM
);
5298 cmd
.host_command_parameters
[0] = tmp
;
5300 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
)
5301 err
= ipw2100_hw_send_command(priv
, &cmd
);
5303 priv
->tx_power
= tx_power
;
5308 static int ipw2100_set_ibss_beacon_interval(struct ipw2100_priv
*priv
,
5309 u32 interval
, int batch_mode
)
5311 struct host_command cmd
= {
5312 .host_command
= BEACON_INTERVAL
,
5313 .host_command_sequence
= 0,
5314 .host_command_length
= 4
5318 cmd
.host_command_parameters
[0] = interval
;
5320 IPW_DEBUG_INFO("enter\n");
5322 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5324 err
= ipw2100_disable_adapter(priv
);
5329 ipw2100_hw_send_command(priv
, &cmd
);
5332 err
= ipw2100_enable_adapter(priv
);
5338 IPW_DEBUG_INFO("exit\n");
5343 static void ipw2100_queues_initialize(struct ipw2100_priv
*priv
)
5345 ipw2100_tx_initialize(priv
);
5346 ipw2100_rx_initialize(priv
);
5347 ipw2100_msg_initialize(priv
);
5350 static void ipw2100_queues_free(struct ipw2100_priv
*priv
)
5352 ipw2100_tx_free(priv
);
5353 ipw2100_rx_free(priv
);
5354 ipw2100_msg_free(priv
);
5357 static int ipw2100_queues_allocate(struct ipw2100_priv
*priv
)
5359 if (ipw2100_tx_allocate(priv
) ||
5360 ipw2100_rx_allocate(priv
) || ipw2100_msg_allocate(priv
))
5366 ipw2100_tx_free(priv
);
5367 ipw2100_rx_free(priv
);
5368 ipw2100_msg_free(priv
);
5372 #define IPW_PRIVACY_CAPABLE 0x0008
5374 static int ipw2100_set_wep_flags(struct ipw2100_priv
*priv
, u32 flags
,
5377 struct host_command cmd
= {
5378 .host_command
= WEP_FLAGS
,
5379 .host_command_sequence
= 0,
5380 .host_command_length
= 4
5384 cmd
.host_command_parameters
[0] = flags
;
5386 IPW_DEBUG_HC("WEP_FLAGS: flags = 0x%08X\n", flags
);
5389 err
= ipw2100_disable_adapter(priv
);
5391 printk(KERN_ERR DRV_NAME
5392 ": %s: Could not disable adapter %d\n",
5393 priv
->net_dev
->name
, err
);
5398 /* send cmd to firmware */
5399 err
= ipw2100_hw_send_command(priv
, &cmd
);
5402 ipw2100_enable_adapter(priv
);
5407 struct ipw2100_wep_key
{
5413 /* Macros to ease up priting WEP keys */
5414 #define WEP_FMT_64 "%02X%02X%02X%02X-%02X"
5415 #define WEP_FMT_128 "%02X%02X%02X%02X-%02X%02X%02X%02X-%02X%02X%02X"
5416 #define WEP_STR_64(x) x[0],x[1],x[2],x[3],x[4]
5417 #define WEP_STR_128(x) x[0],x[1],x[2],x[3],x[4],x[5],x[6],x[7],x[8],x[9],x[10]
5422 * @priv: struct to work on
5423 * @idx: index of the key we want to set
5424 * @key: ptr to the key data to set
5425 * @len: length of the buffer at @key
5426 * @batch_mode: FIXME perform the operation in batch mode, not
5427 * disabling the device.
5429 * @returns 0 if OK, < 0 errno code on error.
5431 * Fill out a command structure with the new wep key, length an
5432 * index and send it down the wire.
5434 static int ipw2100_set_key(struct ipw2100_priv
*priv
,
5435 int idx
, char *key
, int len
, int batch_mode
)
5437 int keylen
= len
? (len
<= 5 ? 5 : 13) : 0;
5438 struct host_command cmd
= {
5439 .host_command
= WEP_KEY_INFO
,
5440 .host_command_sequence
= 0,
5441 .host_command_length
= sizeof(struct ipw2100_wep_key
),
5443 struct ipw2100_wep_key
*wep_key
= (void *)cmd
.host_command_parameters
;
5446 IPW_DEBUG_HC("WEP_KEY_INFO: index = %d, len = %d/%d\n",
5449 /* NOTE: We don't check cached values in case the firmware was reset
5450 * or some other problem is occurring. If the user is setting the key,
5451 * then we push the change */
5454 wep_key
->len
= keylen
;
5457 memcpy(wep_key
->key
, key
, len
);
5458 memset(wep_key
->key
+ len
, 0, keylen
- len
);
5461 /* Will be optimized out on debug not being configured in */
5463 IPW_DEBUG_WEP("%s: Clearing key %d\n",
5464 priv
->net_dev
->name
, wep_key
->idx
);
5465 else if (keylen
== 5)
5466 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_64
"\n",
5467 priv
->net_dev
->name
, wep_key
->idx
, wep_key
->len
,
5468 WEP_STR_64(wep_key
->key
));
5470 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_128
5472 priv
->net_dev
->name
, wep_key
->idx
, wep_key
->len
,
5473 WEP_STR_128(wep_key
->key
));
5476 err
= ipw2100_disable_adapter(priv
);
5477 /* FIXME: IPG: shouldn't this prink be in _disable_adapter()? */
5479 printk(KERN_ERR DRV_NAME
5480 ": %s: Could not disable adapter %d\n",
5481 priv
->net_dev
->name
, err
);
5486 /* send cmd to firmware */
5487 err
= ipw2100_hw_send_command(priv
, &cmd
);
5490 int err2
= ipw2100_enable_adapter(priv
);
5497 static int ipw2100_set_key_index(struct ipw2100_priv
*priv
,
5498 int idx
, int batch_mode
)
5500 struct host_command cmd
= {
5501 .host_command
= WEP_KEY_INDEX
,
5502 .host_command_sequence
= 0,
5503 .host_command_length
= 4,
5504 .host_command_parameters
= {idx
},
5508 IPW_DEBUG_HC("WEP_KEY_INDEX: index = %d\n", idx
);
5510 if (idx
< 0 || idx
> 3)
5514 err
= ipw2100_disable_adapter(priv
);
5516 printk(KERN_ERR DRV_NAME
5517 ": %s: Could not disable adapter %d\n",
5518 priv
->net_dev
->name
, err
);
5523 /* send cmd to firmware */
5524 err
= ipw2100_hw_send_command(priv
, &cmd
);
5527 ipw2100_enable_adapter(priv
);
5532 static int ipw2100_configure_security(struct ipw2100_priv
*priv
, int batch_mode
)
5534 int i
, err
, auth_mode
, sec_level
, use_group
;
5536 if (!(priv
->status
& STATUS_RUNNING
))
5540 err
= ipw2100_disable_adapter(priv
);
5545 if (!priv
->ieee
->sec
.enabled
) {
5547 ipw2100_set_security_information(priv
, IPW_AUTH_OPEN
,
5550 auth_mode
= IPW_AUTH_OPEN
;
5551 if (priv
->ieee
->sec
.flags
& SEC_AUTH_MODE
) {
5552 if (priv
->ieee
->sec
.auth_mode
== WLAN_AUTH_SHARED_KEY
)
5553 auth_mode
= IPW_AUTH_SHARED
;
5554 else if (priv
->ieee
->sec
.auth_mode
== WLAN_AUTH_LEAP
)
5555 auth_mode
= IPW_AUTH_LEAP_CISCO_ID
;
5558 sec_level
= SEC_LEVEL_0
;
5559 if (priv
->ieee
->sec
.flags
& SEC_LEVEL
)
5560 sec_level
= priv
->ieee
->sec
.level
;
5563 if (priv
->ieee
->sec
.flags
& SEC_UNICAST_GROUP
)
5564 use_group
= priv
->ieee
->sec
.unicast_uses_group
;
5567 ipw2100_set_security_information(priv
, auth_mode
, sec_level
,
5574 if (priv
->ieee
->sec
.enabled
) {
5575 for (i
= 0; i
< 4; i
++) {
5576 if (!(priv
->ieee
->sec
.flags
& (1 << i
))) {
5577 memset(priv
->ieee
->sec
.keys
[i
], 0, WEP_KEY_LEN
);
5578 priv
->ieee
->sec
.key_sizes
[i
] = 0;
5580 err
= ipw2100_set_key(priv
, i
,
5581 priv
->ieee
->sec
.keys
[i
],
5589 ipw2100_set_key_index(priv
, priv
->ieee
->crypt_info
.tx_keyidx
, 1);
5592 /* Always enable privacy so the Host can filter WEP packets if
5593 * encrypted data is sent up */
5595 ipw2100_set_wep_flags(priv
,
5597 enabled
? IPW_PRIVACY_CAPABLE
: 0, 1);
5601 priv
->status
&= ~STATUS_SECURITY_UPDATED
;
5605 ipw2100_enable_adapter(priv
);
5610 static void ipw2100_security_work(struct work_struct
*work
)
5612 struct ipw2100_priv
*priv
=
5613 container_of(work
, struct ipw2100_priv
, security_work
.work
);
5615 /* If we happen to have reconnected before we get a chance to
5616 * process this, then update the security settings--which causes
5617 * a disassociation to occur */
5618 if (!(priv
->status
& STATUS_ASSOCIATED
) &&
5619 priv
->status
& STATUS_SECURITY_UPDATED
)
5620 ipw2100_configure_security(priv
, 0);
5623 static void shim__set_security(struct net_device
*dev
,
5624 struct libipw_security
*sec
)
5626 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5627 int i
, force_update
= 0;
5629 mutex_lock(&priv
->action_mutex
);
5630 if (!(priv
->status
& STATUS_INITIALIZED
))
5633 for (i
= 0; i
< 4; i
++) {
5634 if (sec
->flags
& (1 << i
)) {
5635 priv
->ieee
->sec
.key_sizes
[i
] = sec
->key_sizes
[i
];
5636 if (sec
->key_sizes
[i
] == 0)
5637 priv
->ieee
->sec
.flags
&= ~(1 << i
);
5639 memcpy(priv
->ieee
->sec
.keys
[i
], sec
->keys
[i
],
5641 if (sec
->level
== SEC_LEVEL_1
) {
5642 priv
->ieee
->sec
.flags
|= (1 << i
);
5643 priv
->status
|= STATUS_SECURITY_UPDATED
;
5645 priv
->ieee
->sec
.flags
&= ~(1 << i
);
5649 if ((sec
->flags
& SEC_ACTIVE_KEY
) &&
5650 priv
->ieee
->sec
.active_key
!= sec
->active_key
) {
5651 if (sec
->active_key
<= 3) {
5652 priv
->ieee
->sec
.active_key
= sec
->active_key
;
5653 priv
->ieee
->sec
.flags
|= SEC_ACTIVE_KEY
;
5655 priv
->ieee
->sec
.flags
&= ~SEC_ACTIVE_KEY
;
5657 priv
->status
|= STATUS_SECURITY_UPDATED
;
5660 if ((sec
->flags
& SEC_AUTH_MODE
) &&
5661 (priv
->ieee
->sec
.auth_mode
!= sec
->auth_mode
)) {
5662 priv
->ieee
->sec
.auth_mode
= sec
->auth_mode
;
5663 priv
->ieee
->sec
.flags
|= SEC_AUTH_MODE
;
5664 priv
->status
|= STATUS_SECURITY_UPDATED
;
5667 if (sec
->flags
& SEC_ENABLED
&& priv
->ieee
->sec
.enabled
!= sec
->enabled
) {
5668 priv
->ieee
->sec
.flags
|= SEC_ENABLED
;
5669 priv
->ieee
->sec
.enabled
= sec
->enabled
;
5670 priv
->status
|= STATUS_SECURITY_UPDATED
;
5674 if (sec
->flags
& SEC_ENCRYPT
)
5675 priv
->ieee
->sec
.encrypt
= sec
->encrypt
;
5677 if (sec
->flags
& SEC_LEVEL
&& priv
->ieee
->sec
.level
!= sec
->level
) {
5678 priv
->ieee
->sec
.level
= sec
->level
;
5679 priv
->ieee
->sec
.flags
|= SEC_LEVEL
;
5680 priv
->status
|= STATUS_SECURITY_UPDATED
;
5683 IPW_DEBUG_WEP("Security flags: %c %c%c%c%c %c%c%c%c\n",
5684 priv
->ieee
->sec
.flags
& (1 << 8) ? '1' : '0',
5685 priv
->ieee
->sec
.flags
& (1 << 7) ? '1' : '0',
5686 priv
->ieee
->sec
.flags
& (1 << 6) ? '1' : '0',
5687 priv
->ieee
->sec
.flags
& (1 << 5) ? '1' : '0',
5688 priv
->ieee
->sec
.flags
& (1 << 4) ? '1' : '0',
5689 priv
->ieee
->sec
.flags
& (1 << 3) ? '1' : '0',
5690 priv
->ieee
->sec
.flags
& (1 << 2) ? '1' : '0',
5691 priv
->ieee
->sec
.flags
& (1 << 1) ? '1' : '0',
5692 priv
->ieee
->sec
.flags
& (1 << 0) ? '1' : '0');
5694 /* As a temporary work around to enable WPA until we figure out why
5695 * wpa_supplicant toggles the security capability of the driver, which
5696 * forces a disassocation with force_update...
5698 * if (force_update || !(priv->status & STATUS_ASSOCIATED))*/
5699 if (!(priv
->status
& (STATUS_ASSOCIATED
| STATUS_ASSOCIATING
)))
5700 ipw2100_configure_security(priv
, 0);
5702 mutex_unlock(&priv
->action_mutex
);
5705 static int ipw2100_adapter_setup(struct ipw2100_priv
*priv
)
5711 IPW_DEBUG_INFO("enter\n");
5713 err
= ipw2100_disable_adapter(priv
);
5716 #ifdef CONFIG_IPW2100_MONITOR
5717 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
5718 err
= ipw2100_set_channel(priv
, priv
->channel
, batch_mode
);
5722 IPW_DEBUG_INFO("exit\n");
5726 #endif /* CONFIG_IPW2100_MONITOR */
5728 err
= ipw2100_read_mac_address(priv
);
5732 err
= ipw2100_set_mac_address(priv
, batch_mode
);
5736 err
= ipw2100_set_port_type(priv
, priv
->ieee
->iw_mode
, batch_mode
);
5740 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5741 err
= ipw2100_set_channel(priv
, priv
->channel
, batch_mode
);
5746 err
= ipw2100_system_config(priv
, batch_mode
);
5750 err
= ipw2100_set_tx_rates(priv
, priv
->tx_rates
, batch_mode
);
5754 /* Default to power mode OFF */
5755 err
= ipw2100_set_power_mode(priv
, IPW_POWER_MODE_CAM
);
5759 err
= ipw2100_set_rts_threshold(priv
, priv
->rts_threshold
);
5763 if (priv
->config
& CFG_STATIC_BSSID
)
5764 bssid
= priv
->bssid
;
5767 err
= ipw2100_set_mandatory_bssid(priv
, bssid
, batch_mode
);
5771 if (priv
->config
& CFG_STATIC_ESSID
)
5772 err
= ipw2100_set_essid(priv
, priv
->essid
, priv
->essid_len
,
5775 err
= ipw2100_set_essid(priv
, NULL
, 0, batch_mode
);
5779 err
= ipw2100_configure_security(priv
, batch_mode
);
5783 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5785 ipw2100_set_ibss_beacon_interval(priv
,
5786 priv
->beacon_interval
,
5791 err
= ipw2100_set_tx_power(priv
, priv
->tx_power
);
5797 err = ipw2100_set_fragmentation_threshold(
5798 priv, priv->frag_threshold, batch_mode);
5803 IPW_DEBUG_INFO("exit\n");
5808 /*************************************************************************
5810 * EXTERNALLY CALLED METHODS
5812 *************************************************************************/
5814 /* This method is called by the network layer -- not to be confused with
5815 * ipw2100_set_mac_address() declared above called by this driver (and this
5816 * method as well) to talk to the firmware */
5817 static int ipw2100_set_address(struct net_device
*dev
, void *p
)
5819 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5820 struct sockaddr
*addr
= p
;
5823 if (!is_valid_ether_addr(addr
->sa_data
))
5824 return -EADDRNOTAVAIL
;
5826 mutex_lock(&priv
->action_mutex
);
5828 priv
->config
|= CFG_CUSTOM_MAC
;
5829 memcpy(priv
->mac_addr
, addr
->sa_data
, ETH_ALEN
);
5831 err
= ipw2100_set_mac_address(priv
, 0);
5835 priv
->reset_backoff
= 0;
5836 mutex_unlock(&priv
->action_mutex
);
5837 ipw2100_reset_adapter(&priv
->reset_work
.work
);
5841 mutex_unlock(&priv
->action_mutex
);
5845 static int ipw2100_open(struct net_device
*dev
)
5847 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5848 unsigned long flags
;
5849 IPW_DEBUG_INFO("dev->open\n");
5851 spin_lock_irqsave(&priv
->low_lock
, flags
);
5852 if (priv
->status
& STATUS_ASSOCIATED
) {
5853 netif_carrier_on(dev
);
5854 netif_start_queue(dev
);
5856 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
5861 static int ipw2100_close(struct net_device
*dev
)
5863 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5864 unsigned long flags
;
5865 struct list_head
*element
;
5866 struct ipw2100_tx_packet
*packet
;
5868 IPW_DEBUG_INFO("enter\n");
5870 spin_lock_irqsave(&priv
->low_lock
, flags
);
5872 if (priv
->status
& STATUS_ASSOCIATED
)
5873 netif_carrier_off(dev
);
5874 netif_stop_queue(dev
);
5876 /* Flush the TX queue ... */
5877 while (!list_empty(&priv
->tx_pend_list
)) {
5878 element
= priv
->tx_pend_list
.next
;
5879 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
5882 DEC_STAT(&priv
->tx_pend_stat
);
5884 libipw_txb_free(packet
->info
.d_struct
.txb
);
5885 packet
->info
.d_struct
.txb
= NULL
;
5887 list_add_tail(element
, &priv
->tx_free_list
);
5888 INC_STAT(&priv
->tx_free_stat
);
5890 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
5892 IPW_DEBUG_INFO("exit\n");
5898 * TODO: Fix this function... its just wrong
5900 static void ipw2100_tx_timeout(struct net_device
*dev
)
5902 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5904 dev
->stats
.tx_errors
++;
5906 #ifdef CONFIG_IPW2100_MONITOR
5907 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
5911 IPW_DEBUG_INFO("%s: TX timed out. Scheduling firmware restart.\n",
5913 schedule_reset(priv
);
5916 static int ipw2100_wpa_enable(struct ipw2100_priv
*priv
, int value
)
5918 /* This is called when wpa_supplicant loads and closes the driver
5920 priv
->ieee
->wpa_enabled
= value
;
5924 static int ipw2100_wpa_set_auth_algs(struct ipw2100_priv
*priv
, int value
)
5927 struct libipw_device
*ieee
= priv
->ieee
;
5928 struct libipw_security sec
= {
5929 .flags
= SEC_AUTH_MODE
,
5933 if (value
& IW_AUTH_ALG_SHARED_KEY
) {
5934 sec
.auth_mode
= WLAN_AUTH_SHARED_KEY
;
5936 } else if (value
& IW_AUTH_ALG_OPEN_SYSTEM
) {
5937 sec
.auth_mode
= WLAN_AUTH_OPEN
;
5939 } else if (value
& IW_AUTH_ALG_LEAP
) {
5940 sec
.auth_mode
= WLAN_AUTH_LEAP
;
5945 if (ieee
->set_security
)
5946 ieee
->set_security(ieee
->dev
, &sec
);
5953 static void ipw2100_wpa_assoc_frame(struct ipw2100_priv
*priv
,
5954 char *wpa_ie
, int wpa_ie_len
)
5957 struct ipw2100_wpa_assoc_frame frame
;
5959 frame
.fixed_ie_mask
= 0;
5962 memcpy(frame
.var_ie
, wpa_ie
, wpa_ie_len
);
5963 frame
.var_ie_len
= wpa_ie_len
;
5965 /* make sure WPA is enabled */
5966 ipw2100_wpa_enable(priv
, 1);
5967 ipw2100_set_wpa_ie(priv
, &frame
, 0);
5970 static void ipw_ethtool_get_drvinfo(struct net_device
*dev
,
5971 struct ethtool_drvinfo
*info
)
5973 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5974 char fw_ver
[64], ucode_ver
[64];
5976 strlcpy(info
->driver
, DRV_NAME
, sizeof(info
->driver
));
5977 strlcpy(info
->version
, DRV_VERSION
, sizeof(info
->version
));
5979 ipw2100_get_fwversion(priv
, fw_ver
, sizeof(fw_ver
));
5980 ipw2100_get_ucodeversion(priv
, ucode_ver
, sizeof(ucode_ver
));
5982 snprintf(info
->fw_version
, sizeof(info
->fw_version
), "%s:%d:%s",
5983 fw_ver
, priv
->eeprom_version
, ucode_ver
);
5985 strlcpy(info
->bus_info
, pci_name(priv
->pci_dev
),
5986 sizeof(info
->bus_info
));
5989 static u32
ipw2100_ethtool_get_link(struct net_device
*dev
)
5991 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5992 return (priv
->status
& STATUS_ASSOCIATED
) ? 1 : 0;
5995 static const struct ethtool_ops ipw2100_ethtool_ops
= {
5996 .get_link
= ipw2100_ethtool_get_link
,
5997 .get_drvinfo
= ipw_ethtool_get_drvinfo
,
6000 static void ipw2100_hang_check(struct work_struct
*work
)
6002 struct ipw2100_priv
*priv
=
6003 container_of(work
, struct ipw2100_priv
, hang_check
.work
);
6004 unsigned long flags
;
6005 u32 rtc
= 0xa5a5a5a5;
6006 u32 len
= sizeof(rtc
);
6009 spin_lock_irqsave(&priv
->low_lock
, flags
);
6011 if (priv
->fatal_error
!= 0) {
6012 /* If fatal_error is set then we need to restart */
6013 IPW_DEBUG_INFO("%s: Hardware fatal error detected.\n",
6014 priv
->net_dev
->name
);
6017 } else if (ipw2100_get_ordinal(priv
, IPW_ORD_RTC_TIME
, &rtc
, &len
) ||
6018 (rtc
== priv
->last_rtc
)) {
6019 /* Check if firmware is hung */
6020 IPW_DEBUG_INFO("%s: Firmware RTC stalled.\n",
6021 priv
->net_dev
->name
);
6028 priv
->stop_hang_check
= 1;
6031 /* Restart the NIC */
6032 schedule_reset(priv
);
6035 priv
->last_rtc
= rtc
;
6037 if (!priv
->stop_hang_check
)
6038 schedule_delayed_work(&priv
->hang_check
, HZ
/ 2);
6040 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
6043 static void ipw2100_rf_kill(struct work_struct
*work
)
6045 struct ipw2100_priv
*priv
=
6046 container_of(work
, struct ipw2100_priv
, rf_kill
.work
);
6047 unsigned long flags
;
6049 spin_lock_irqsave(&priv
->low_lock
, flags
);
6051 if (rf_kill_active(priv
)) {
6052 IPW_DEBUG_RF_KILL("RF Kill active, rescheduling GPIO check\n");
6053 if (!priv
->stop_rf_kill
)
6054 schedule_delayed_work(&priv
->rf_kill
,
6055 round_jiffies_relative(HZ
));
6059 /* RF Kill is now disabled, so bring the device back up */
6061 if (!(priv
->status
& STATUS_RF_KILL_MASK
)) {
6062 IPW_DEBUG_RF_KILL("HW RF Kill no longer active, restarting "
6064 schedule_reset(priv
);
6066 IPW_DEBUG_RF_KILL("HW RF Kill deactivated. SW RF Kill still "
6070 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
6073 static void ipw2100_irq_tasklet(struct ipw2100_priv
*priv
);
6075 static const struct net_device_ops ipw2100_netdev_ops
= {
6076 .ndo_open
= ipw2100_open
,
6077 .ndo_stop
= ipw2100_close
,
6078 .ndo_start_xmit
= libipw_xmit
,
6079 .ndo_change_mtu
= libipw_change_mtu
,
6080 .ndo_tx_timeout
= ipw2100_tx_timeout
,
6081 .ndo_set_mac_address
= ipw2100_set_address
,
6082 .ndo_validate_addr
= eth_validate_addr
,
6085 /* Look into using netdev destructor to shutdown libipw? */
6087 static struct net_device
*ipw2100_alloc_device(struct pci_dev
*pci_dev
,
6088 void __iomem
* ioaddr
)
6090 struct ipw2100_priv
*priv
;
6091 struct net_device
*dev
;
6093 dev
= alloc_libipw(sizeof(struct ipw2100_priv
), 0);
6096 priv
= libipw_priv(dev
);
6097 priv
->ieee
= netdev_priv(dev
);
6098 priv
->pci_dev
= pci_dev
;
6099 priv
->net_dev
= dev
;
6100 priv
->ioaddr
= ioaddr
;
6102 priv
->ieee
->hard_start_xmit
= ipw2100_tx
;
6103 priv
->ieee
->set_security
= shim__set_security
;
6105 priv
->ieee
->perfect_rssi
= -20;
6106 priv
->ieee
->worst_rssi
= -85;
6108 dev
->netdev_ops
= &ipw2100_netdev_ops
;
6109 dev
->ethtool_ops
= &ipw2100_ethtool_ops
;
6110 dev
->wireless_handlers
= &ipw2100_wx_handler_def
;
6111 priv
->wireless_data
.libipw
= priv
->ieee
;
6112 dev
->wireless_data
= &priv
->wireless_data
;
6113 dev
->watchdog_timeo
= 3 * HZ
;
6116 /* NOTE: We don't use the wireless_handlers hook
6117 * in dev as the system will start throwing WX requests
6118 * to us before we're actually initialized and it just
6119 * ends up causing problems. So, we just handle
6120 * the WX extensions through the ipw2100_ioctl interface */
6122 /* memset() puts everything to 0, so we only have explicitly set
6123 * those values that need to be something else */
6125 /* If power management is turned on, default to AUTO mode */
6126 priv
->power_mode
= IPW_POWER_AUTO
;
6128 #ifdef CONFIG_IPW2100_MONITOR
6129 priv
->config
|= CFG_CRC_CHECK
;
6131 priv
->ieee
->wpa_enabled
= 0;
6132 priv
->ieee
->drop_unencrypted
= 0;
6133 priv
->ieee
->privacy_invoked
= 0;
6134 priv
->ieee
->ieee802_1x
= 1;
6136 /* Set module parameters */
6137 switch (network_mode
) {
6139 priv
->ieee
->iw_mode
= IW_MODE_ADHOC
;
6141 #ifdef CONFIG_IPW2100_MONITOR
6143 priv
->ieee
->iw_mode
= IW_MODE_MONITOR
;
6148 priv
->ieee
->iw_mode
= IW_MODE_INFRA
;
6153 priv
->status
|= STATUS_RF_KILL_SW
;
6156 ((channel
>= REG_MIN_CHANNEL
) && (channel
<= REG_MAX_CHANNEL
))) {
6157 priv
->config
|= CFG_STATIC_CHANNEL
;
6158 priv
->channel
= channel
;
6162 priv
->config
|= CFG_ASSOCIATE
;
6164 priv
->beacon_interval
= DEFAULT_BEACON_INTERVAL
;
6165 priv
->short_retry_limit
= DEFAULT_SHORT_RETRY_LIMIT
;
6166 priv
->long_retry_limit
= DEFAULT_LONG_RETRY_LIMIT
;
6167 priv
->rts_threshold
= DEFAULT_RTS_THRESHOLD
| RTS_DISABLED
;
6168 priv
->frag_threshold
= DEFAULT_FTS
| FRAG_DISABLED
;
6169 priv
->tx_power
= IPW_TX_POWER_DEFAULT
;
6170 priv
->tx_rates
= DEFAULT_TX_RATES
;
6172 strcpy(priv
->nick
, "ipw2100");
6174 spin_lock_init(&priv
->low_lock
);
6175 mutex_init(&priv
->action_mutex
);
6176 mutex_init(&priv
->adapter_mutex
);
6178 init_waitqueue_head(&priv
->wait_command_queue
);
6180 netif_carrier_off(dev
);
6182 INIT_LIST_HEAD(&priv
->msg_free_list
);
6183 INIT_LIST_HEAD(&priv
->msg_pend_list
);
6184 INIT_STAT(&priv
->msg_free_stat
);
6185 INIT_STAT(&priv
->msg_pend_stat
);
6187 INIT_LIST_HEAD(&priv
->tx_free_list
);
6188 INIT_LIST_HEAD(&priv
->tx_pend_list
);
6189 INIT_STAT(&priv
->tx_free_stat
);
6190 INIT_STAT(&priv
->tx_pend_stat
);
6192 INIT_LIST_HEAD(&priv
->fw_pend_list
);
6193 INIT_STAT(&priv
->fw_pend_stat
);
6195 INIT_DELAYED_WORK(&priv
->reset_work
, ipw2100_reset_adapter
);
6196 INIT_DELAYED_WORK(&priv
->security_work
, ipw2100_security_work
);
6197 INIT_DELAYED_WORK(&priv
->wx_event_work
, ipw2100_wx_event_work
);
6198 INIT_DELAYED_WORK(&priv
->hang_check
, ipw2100_hang_check
);
6199 INIT_DELAYED_WORK(&priv
->rf_kill
, ipw2100_rf_kill
);
6200 INIT_WORK(&priv
->scan_event_now
, ipw2100_scan_event_now
);
6201 INIT_DELAYED_WORK(&priv
->scan_event_later
, ipw2100_scan_event_later
);
6203 tasklet_init(&priv
->irq_tasklet
, (void (*)(unsigned long))
6204 ipw2100_irq_tasklet
, (unsigned long)priv
);
6206 /* NOTE: We do not start the deferred work for status checks yet */
6207 priv
->stop_rf_kill
= 1;
6208 priv
->stop_hang_check
= 1;
6213 static int ipw2100_pci_init_one(struct pci_dev
*pci_dev
,
6214 const struct pci_device_id
*ent
)
6216 void __iomem
*ioaddr
;
6217 struct net_device
*dev
= NULL
;
6218 struct ipw2100_priv
*priv
= NULL
;
6223 IPW_DEBUG_INFO("enter\n");
6225 if (!(pci_resource_flags(pci_dev
, 0) & IORESOURCE_MEM
)) {
6226 IPW_DEBUG_INFO("weird - resource type is not memory\n");
6231 ioaddr
= pci_iomap(pci_dev
, 0, 0);
6233 printk(KERN_WARNING DRV_NAME
6234 "Error calling ioremap_nocache.\n");
6239 /* allocate and initialize our net_device */
6240 dev
= ipw2100_alloc_device(pci_dev
, ioaddr
);
6242 printk(KERN_WARNING DRV_NAME
6243 "Error calling ipw2100_alloc_device.\n");
6248 /* set up PCI mappings for device */
6249 err
= pci_enable_device(pci_dev
);
6251 printk(KERN_WARNING DRV_NAME
6252 "Error calling pci_enable_device.\n");
6256 priv
= libipw_priv(dev
);
6258 pci_set_master(pci_dev
);
6259 pci_set_drvdata(pci_dev
, priv
);
6261 err
= pci_set_dma_mask(pci_dev
, DMA_BIT_MASK(32));
6263 printk(KERN_WARNING DRV_NAME
6264 "Error calling pci_set_dma_mask.\n");
6265 pci_disable_device(pci_dev
);
6269 err
= pci_request_regions(pci_dev
, DRV_NAME
);
6271 printk(KERN_WARNING DRV_NAME
6272 "Error calling pci_request_regions.\n");
6273 pci_disable_device(pci_dev
);
6277 /* We disable the RETRY_TIMEOUT register (0x41) to keep
6278 * PCI Tx retries from interfering with C3 CPU state */
6279 pci_read_config_dword(pci_dev
, 0x40, &val
);
6280 if ((val
& 0x0000ff00) != 0)
6281 pci_write_config_dword(pci_dev
, 0x40, val
& 0xffff00ff);
6283 pci_set_power_state(pci_dev
, PCI_D0
);
6285 if (!ipw2100_hw_is_adapter_in_system(dev
)) {
6286 printk(KERN_WARNING DRV_NAME
6287 "Device not found via register read.\n");
6292 SET_NETDEV_DEV(dev
, &pci_dev
->dev
);
6294 /* Force interrupts to be shut off on the device */
6295 priv
->status
|= STATUS_INT_ENABLED
;
6296 ipw2100_disable_interrupts(priv
);
6298 /* Allocate and initialize the Tx/Rx queues and lists */
6299 if (ipw2100_queues_allocate(priv
)) {
6300 printk(KERN_WARNING DRV_NAME
6301 "Error calling ipw2100_queues_allocate.\n");
6305 ipw2100_queues_initialize(priv
);
6307 err
= request_irq(pci_dev
->irq
,
6308 ipw2100_interrupt
, IRQF_SHARED
, dev
->name
, priv
);
6310 printk(KERN_WARNING DRV_NAME
6311 "Error calling request_irq: %d.\n", pci_dev
->irq
);
6314 dev
->irq
= pci_dev
->irq
;
6316 IPW_DEBUG_INFO("Attempting to register device...\n");
6318 printk(KERN_INFO DRV_NAME
6319 ": Detected Intel PRO/Wireless 2100 Network Connection\n");
6321 err
= ipw2100_up(priv
, 1);
6325 err
= ipw2100_wdev_init(dev
);
6330 /* Bring up the interface. Pre 0.46, after we registered the
6331 * network device we would call ipw2100_up. This introduced a race
6332 * condition with newer hotplug configurations (network was coming
6333 * up and making calls before the device was initialized).
6335 err
= register_netdev(dev
);
6337 printk(KERN_WARNING DRV_NAME
6338 "Error calling register_netdev.\n");
6343 mutex_lock(&priv
->action_mutex
);
6345 IPW_DEBUG_INFO("%s: Bound to %s\n", dev
->name
, pci_name(pci_dev
));
6347 /* perform this after register_netdev so that dev->name is set */
6348 err
= sysfs_create_group(&pci_dev
->dev
.kobj
, &ipw2100_attribute_group
);
6352 /* If the RF Kill switch is disabled, go ahead and complete the
6353 * startup sequence */
6354 if (!(priv
->status
& STATUS_RF_KILL_MASK
)) {
6355 /* Enable the adapter - sends HOST_COMPLETE */
6356 if (ipw2100_enable_adapter(priv
)) {
6357 printk(KERN_WARNING DRV_NAME
6358 ": %s: failed in call to enable adapter.\n",
6359 priv
->net_dev
->name
);
6360 ipw2100_hw_stop_adapter(priv
);
6365 /* Start a scan . . . */
6366 ipw2100_set_scan_options(priv
);
6367 ipw2100_start_scan(priv
);
6370 IPW_DEBUG_INFO("exit\n");
6372 priv
->status
|= STATUS_INITIALIZED
;
6374 mutex_unlock(&priv
->action_mutex
);
6379 mutex_unlock(&priv
->action_mutex
);
6382 if (registered
>= 2)
6383 unregister_netdev(dev
);
6386 wiphy_unregister(priv
->ieee
->wdev
.wiphy
);
6387 kfree(priv
->ieee
->bg_band
.channels
);
6390 ipw2100_hw_stop_adapter(priv
);
6392 ipw2100_disable_interrupts(priv
);
6395 free_irq(dev
->irq
, priv
);
6397 ipw2100_kill_works(priv
);
6399 /* These are safe to call even if they weren't allocated */
6400 ipw2100_queues_free(priv
);
6401 sysfs_remove_group(&pci_dev
->dev
.kobj
,
6402 &ipw2100_attribute_group
);
6404 free_libipw(dev
, 0);
6405 pci_set_drvdata(pci_dev
, NULL
);
6408 pci_iounmap(pci_dev
, ioaddr
);
6410 pci_release_regions(pci_dev
);
6411 pci_disable_device(pci_dev
);
6415 static void __devexit
ipw2100_pci_remove_one(struct pci_dev
*pci_dev
)
6417 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6418 struct net_device
*dev
= priv
->net_dev
;
6420 mutex_lock(&priv
->action_mutex
);
6422 priv
->status
&= ~STATUS_INITIALIZED
;
6424 sysfs_remove_group(&pci_dev
->dev
.kobj
, &ipw2100_attribute_group
);
6427 if (ipw2100_firmware
.version
)
6428 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
6430 /* Take down the hardware */
6433 /* Release the mutex so that the network subsystem can
6434 * complete any needed calls into the driver... */
6435 mutex_unlock(&priv
->action_mutex
);
6437 /* Unregister the device first - this results in close()
6438 * being called if the device is open. If we free storage
6439 * first, then close() will crash.
6440 * FIXME: remove the comment above. */
6441 unregister_netdev(dev
);
6443 ipw2100_kill_works(priv
);
6445 ipw2100_queues_free(priv
);
6447 /* Free potential debugging firmware snapshot */
6448 ipw2100_snapshot_free(priv
);
6450 free_irq(dev
->irq
, priv
);
6452 pci_iounmap(pci_dev
, priv
->ioaddr
);
6454 /* wiphy_unregister needs to be here, before free_libipw */
6455 wiphy_unregister(priv
->ieee
->wdev
.wiphy
);
6456 kfree(priv
->ieee
->bg_band
.channels
);
6457 free_libipw(dev
, 0);
6459 pci_release_regions(pci_dev
);
6460 pci_disable_device(pci_dev
);
6462 IPW_DEBUG_INFO("exit\n");
6466 static int ipw2100_suspend(struct pci_dev
*pci_dev
, pm_message_t state
)
6468 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6469 struct net_device
*dev
= priv
->net_dev
;
6471 IPW_DEBUG_INFO("%s: Going into suspend...\n", dev
->name
);
6473 mutex_lock(&priv
->action_mutex
);
6474 if (priv
->status
& STATUS_INITIALIZED
) {
6475 /* Take down the device; powers it off, etc. */
6479 /* Remove the PRESENT state of the device */
6480 netif_device_detach(dev
);
6482 pci_save_state(pci_dev
);
6483 pci_disable_device(pci_dev
);
6484 pci_set_power_state(pci_dev
, PCI_D3hot
);
6486 priv
->suspend_at
= get_seconds();
6488 mutex_unlock(&priv
->action_mutex
);
6493 static int ipw2100_resume(struct pci_dev
*pci_dev
)
6495 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6496 struct net_device
*dev
= priv
->net_dev
;
6500 if (IPW2100_PM_DISABLED
)
6503 mutex_lock(&priv
->action_mutex
);
6505 IPW_DEBUG_INFO("%s: Coming out of suspend...\n", dev
->name
);
6507 pci_set_power_state(pci_dev
, PCI_D0
);
6508 err
= pci_enable_device(pci_dev
);
6510 printk(KERN_ERR
"%s: pci_enable_device failed on resume\n",
6512 mutex_unlock(&priv
->action_mutex
);
6515 pci_restore_state(pci_dev
);
6518 * Suspend/Resume resets the PCI configuration space, so we have to
6519 * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
6520 * from interfering with C3 CPU state. pci_restore_state won't help
6521 * here since it only restores the first 64 bytes pci config header.
6523 pci_read_config_dword(pci_dev
, 0x40, &val
);
6524 if ((val
& 0x0000ff00) != 0)
6525 pci_write_config_dword(pci_dev
, 0x40, val
& 0xffff00ff);
6527 /* Set the device back into the PRESENT state; this will also wake
6528 * the queue of needed */
6529 netif_device_attach(dev
);
6531 priv
->suspend_time
= get_seconds() - priv
->suspend_at
;
6533 /* Bring the device back up */
6534 if (!(priv
->status
& STATUS_RF_KILL_SW
))
6535 ipw2100_up(priv
, 0);
6537 mutex_unlock(&priv
->action_mutex
);
6543 static void ipw2100_shutdown(struct pci_dev
*pci_dev
)
6545 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6547 /* Take down the device; powers it off, etc. */
6550 pci_disable_device(pci_dev
);
6553 #define IPW2100_DEV_ID(x) { PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, x }
6555 static DEFINE_PCI_DEVICE_TABLE(ipw2100_pci_id_table
) = {
6556 IPW2100_DEV_ID(0x2520), /* IN 2100A mPCI 3A */
6557 IPW2100_DEV_ID(0x2521), /* IN 2100A mPCI 3B */
6558 IPW2100_DEV_ID(0x2524), /* IN 2100A mPCI 3B */
6559 IPW2100_DEV_ID(0x2525), /* IN 2100A mPCI 3B */
6560 IPW2100_DEV_ID(0x2526), /* IN 2100A mPCI Gen A3 */
6561 IPW2100_DEV_ID(0x2522), /* IN 2100 mPCI 3B */
6562 IPW2100_DEV_ID(0x2523), /* IN 2100 mPCI 3A */
6563 IPW2100_DEV_ID(0x2527), /* IN 2100 mPCI 3B */
6564 IPW2100_DEV_ID(0x2528), /* IN 2100 mPCI 3B */
6565 IPW2100_DEV_ID(0x2529), /* IN 2100 mPCI 3B */
6566 IPW2100_DEV_ID(0x252B), /* IN 2100 mPCI 3A */
6567 IPW2100_DEV_ID(0x252C), /* IN 2100 mPCI 3A */
6568 IPW2100_DEV_ID(0x252D), /* IN 2100 mPCI 3A */
6570 IPW2100_DEV_ID(0x2550), /* IB 2100A mPCI 3B */
6571 IPW2100_DEV_ID(0x2551), /* IB 2100 mPCI 3B */
6572 IPW2100_DEV_ID(0x2553), /* IB 2100 mPCI 3B */
6573 IPW2100_DEV_ID(0x2554), /* IB 2100 mPCI 3B */
6574 IPW2100_DEV_ID(0x2555), /* IB 2100 mPCI 3B */
6576 IPW2100_DEV_ID(0x2560), /* DE 2100A mPCI 3A */
6577 IPW2100_DEV_ID(0x2562), /* DE 2100A mPCI 3A */
6578 IPW2100_DEV_ID(0x2563), /* DE 2100A mPCI 3A */
6579 IPW2100_DEV_ID(0x2561), /* DE 2100 mPCI 3A */
6580 IPW2100_DEV_ID(0x2565), /* DE 2100 mPCI 3A */
6581 IPW2100_DEV_ID(0x2566), /* DE 2100 mPCI 3A */
6582 IPW2100_DEV_ID(0x2567), /* DE 2100 mPCI 3A */
6584 IPW2100_DEV_ID(0x2570), /* GA 2100 mPCI 3B */
6586 IPW2100_DEV_ID(0x2580), /* TO 2100A mPCI 3B */
6587 IPW2100_DEV_ID(0x2582), /* TO 2100A mPCI 3B */
6588 IPW2100_DEV_ID(0x2583), /* TO 2100A mPCI 3B */
6589 IPW2100_DEV_ID(0x2581), /* TO 2100 mPCI 3B */
6590 IPW2100_DEV_ID(0x2585), /* TO 2100 mPCI 3B */
6591 IPW2100_DEV_ID(0x2586), /* TO 2100 mPCI 3B */
6592 IPW2100_DEV_ID(0x2587), /* TO 2100 mPCI 3B */
6594 IPW2100_DEV_ID(0x2590), /* SO 2100A mPCI 3B */
6595 IPW2100_DEV_ID(0x2592), /* SO 2100A mPCI 3B */
6596 IPW2100_DEV_ID(0x2591), /* SO 2100 mPCI 3B */
6597 IPW2100_DEV_ID(0x2593), /* SO 2100 mPCI 3B */
6598 IPW2100_DEV_ID(0x2596), /* SO 2100 mPCI 3B */
6599 IPW2100_DEV_ID(0x2598), /* SO 2100 mPCI 3B */
6601 IPW2100_DEV_ID(0x25A0), /* HP 2100 mPCI 3B */
6605 MODULE_DEVICE_TABLE(pci
, ipw2100_pci_id_table
);
6607 static struct pci_driver ipw2100_pci_driver
= {
6609 .id_table
= ipw2100_pci_id_table
,
6610 .probe
= ipw2100_pci_init_one
,
6611 .remove
= __devexit_p(ipw2100_pci_remove_one
),
6613 .suspend
= ipw2100_suspend
,
6614 .resume
= ipw2100_resume
,
6616 .shutdown
= ipw2100_shutdown
,
6620 * Initialize the ipw2100 driver/module
6622 * @returns 0 if ok, < 0 errno node con error.
6624 * Note: we cannot init the /proc stuff until the PCI driver is there,
6625 * or we risk an unlikely race condition on someone accessing
6626 * uninitialized data in the PCI dev struct through /proc.
6628 static int __init
ipw2100_init(void)
6632 printk(KERN_INFO DRV_NAME
": %s, %s\n", DRV_DESCRIPTION
, DRV_VERSION
);
6633 printk(KERN_INFO DRV_NAME
": %s\n", DRV_COPYRIGHT
);
6635 pm_qos_add_request(&ipw2100_pm_qos_req
, PM_QOS_CPU_DMA_LATENCY
,
6636 PM_QOS_DEFAULT_VALUE
);
6638 ret
= pci_register_driver(&ipw2100_pci_driver
);
6642 #ifdef CONFIG_IPW2100_DEBUG
6643 ipw2100_debug_level
= debug
;
6644 ret
= driver_create_file(&ipw2100_pci_driver
.driver
,
6645 &driver_attr_debug_level
);
6653 * Cleanup ipw2100 driver registration
6655 static void __exit
ipw2100_exit(void)
6657 /* FIXME: IPG: check that we have no instances of the devices open */
6658 #ifdef CONFIG_IPW2100_DEBUG
6659 driver_remove_file(&ipw2100_pci_driver
.driver
,
6660 &driver_attr_debug_level
);
6662 pci_unregister_driver(&ipw2100_pci_driver
);
6663 pm_qos_remove_request(&ipw2100_pm_qos_req
);
6666 module_init(ipw2100_init
);
6667 module_exit(ipw2100_exit
);
6669 static int ipw2100_wx_get_name(struct net_device
*dev
,
6670 struct iw_request_info
*info
,
6671 union iwreq_data
*wrqu
, char *extra
)
6674 * This can be called at any time. No action lock required
6677 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6678 if (!(priv
->status
& STATUS_ASSOCIATED
))
6679 strcpy(wrqu
->name
, "unassociated");
6681 snprintf(wrqu
->name
, IFNAMSIZ
, "IEEE 802.11b");
6683 IPW_DEBUG_WX("Name: %s\n", wrqu
->name
);
6687 static int ipw2100_wx_set_freq(struct net_device
*dev
,
6688 struct iw_request_info
*info
,
6689 union iwreq_data
*wrqu
, char *extra
)
6691 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6692 struct iw_freq
*fwrq
= &wrqu
->freq
;
6695 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
)
6698 mutex_lock(&priv
->action_mutex
);
6699 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6704 /* if setting by freq convert to channel */
6706 if ((fwrq
->m
>= (int)2.412e8
&& fwrq
->m
<= (int)2.487e8
)) {
6707 int f
= fwrq
->m
/ 100000;
6710 while ((c
< REG_MAX_CHANNEL
) &&
6711 (f
!= ipw2100_frequencies
[c
]))
6714 /* hack to fall through */
6720 if (fwrq
->e
> 0 || fwrq
->m
> 1000) {
6723 } else { /* Set the channel */
6724 IPW_DEBUG_WX("SET Freq/Channel -> %d\n", fwrq
->m
);
6725 err
= ipw2100_set_channel(priv
, fwrq
->m
, 0);
6729 mutex_unlock(&priv
->action_mutex
);
6733 static int ipw2100_wx_get_freq(struct net_device
*dev
,
6734 struct iw_request_info
*info
,
6735 union iwreq_data
*wrqu
, char *extra
)
6738 * This can be called at any time. No action lock required
6741 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6745 /* If we are associated, trying to associate, or have a statically
6746 * configured CHANNEL then return that; otherwise return ANY */
6747 if (priv
->config
& CFG_STATIC_CHANNEL
||
6748 priv
->status
& STATUS_ASSOCIATED
)
6749 wrqu
->freq
.m
= priv
->channel
;
6753 IPW_DEBUG_WX("GET Freq/Channel -> %d\n", priv
->channel
);
6758 static int ipw2100_wx_set_mode(struct net_device
*dev
,
6759 struct iw_request_info
*info
,
6760 union iwreq_data
*wrqu
, char *extra
)
6762 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6765 IPW_DEBUG_WX("SET Mode -> %d\n", wrqu
->mode
);
6767 if (wrqu
->mode
== priv
->ieee
->iw_mode
)
6770 mutex_lock(&priv
->action_mutex
);
6771 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6776 switch (wrqu
->mode
) {
6777 #ifdef CONFIG_IPW2100_MONITOR
6778 case IW_MODE_MONITOR
:
6779 err
= ipw2100_switch_mode(priv
, IW_MODE_MONITOR
);
6781 #endif /* CONFIG_IPW2100_MONITOR */
6783 err
= ipw2100_switch_mode(priv
, IW_MODE_ADHOC
);
6788 err
= ipw2100_switch_mode(priv
, IW_MODE_INFRA
);
6793 mutex_unlock(&priv
->action_mutex
);
6797 static int ipw2100_wx_get_mode(struct net_device
*dev
,
6798 struct iw_request_info
*info
,
6799 union iwreq_data
*wrqu
, char *extra
)
6802 * This can be called at any time. No action lock required
6805 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6807 wrqu
->mode
= priv
->ieee
->iw_mode
;
6808 IPW_DEBUG_WX("GET Mode -> %d\n", wrqu
->mode
);
6813 #define POWER_MODES 5
6815 /* Values are in microsecond */
6816 static const s32 timeout_duration
[POWER_MODES
] = {
6824 static const s32 period_duration
[POWER_MODES
] = {
6832 static int ipw2100_wx_get_range(struct net_device
*dev
,
6833 struct iw_request_info
*info
,
6834 union iwreq_data
*wrqu
, char *extra
)
6837 * This can be called at any time. No action lock required
6840 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6841 struct iw_range
*range
= (struct iw_range
*)extra
;
6845 wrqu
->data
.length
= sizeof(*range
);
6846 memset(range
, 0, sizeof(*range
));
6848 /* Let's try to keep this struct in the same order as in
6849 * linux/include/wireless.h
6852 /* TODO: See what values we can set, and remove the ones we can't
6853 * set, or fill them with some default data.
6856 /* ~5 Mb/s real (802.11b) */
6857 range
->throughput
= 5 * 1000 * 1000;
6859 // range->sensitivity; /* signal level threshold range */
6861 range
->max_qual
.qual
= 100;
6862 /* TODO: Find real max RSSI and stick here */
6863 range
->max_qual
.level
= 0;
6864 range
->max_qual
.noise
= 0;
6865 range
->max_qual
.updated
= 7; /* Updated all three */
6867 range
->avg_qual
.qual
= 70; /* > 8% missed beacons is 'bad' */
6868 /* TODO: Find real 'good' to 'bad' threshold value for RSSI */
6869 range
->avg_qual
.level
= 20 + IPW2100_RSSI_TO_DBM
;
6870 range
->avg_qual
.noise
= 0;
6871 range
->avg_qual
.updated
= 7; /* Updated all three */
6873 range
->num_bitrates
= RATE_COUNT
;
6875 for (i
= 0; i
< RATE_COUNT
&& i
< IW_MAX_BITRATES
; i
++) {
6876 range
->bitrate
[i
] = ipw2100_bg_rates
[i
].bitrate
* 100 * 1000;
6879 range
->min_rts
= MIN_RTS_THRESHOLD
;
6880 range
->max_rts
= MAX_RTS_THRESHOLD
;
6881 range
->min_frag
= MIN_FRAG_THRESHOLD
;
6882 range
->max_frag
= MAX_FRAG_THRESHOLD
;
6884 range
->min_pmp
= period_duration
[0]; /* Minimal PM period */
6885 range
->max_pmp
= period_duration
[POWER_MODES
- 1]; /* Maximal PM period */
6886 range
->min_pmt
= timeout_duration
[POWER_MODES
- 1]; /* Minimal PM timeout */
6887 range
->max_pmt
= timeout_duration
[0]; /* Maximal PM timeout */
6889 /* How to decode max/min PM period */
6890 range
->pmp_flags
= IW_POWER_PERIOD
;
6891 /* How to decode max/min PM period */
6892 range
->pmt_flags
= IW_POWER_TIMEOUT
;
6893 /* What PM options are supported */
6894 range
->pm_capa
= IW_POWER_TIMEOUT
| IW_POWER_PERIOD
;
6896 range
->encoding_size
[0] = 5;
6897 range
->encoding_size
[1] = 13; /* Different token sizes */
6898 range
->num_encoding_sizes
= 2; /* Number of entry in the list */
6899 range
->max_encoding_tokens
= WEP_KEYS
; /* Max number of tokens */
6900 // range->encoding_login_index; /* token index for login token */
6902 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
6903 range
->txpower_capa
= IW_TXPOW_DBM
;
6904 range
->num_txpower
= IW_MAX_TXPOWER
;
6905 for (i
= 0, level
= (IPW_TX_POWER_MAX_DBM
* 16);
6908 ((IPW_TX_POWER_MAX_DBM
-
6909 IPW_TX_POWER_MIN_DBM
) * 16) / (IW_MAX_TXPOWER
- 1))
6910 range
->txpower
[i
] = level
/ 16;
6912 range
->txpower_capa
= 0;
6913 range
->num_txpower
= 0;
6916 /* Set the Wireless Extension versions */
6917 range
->we_version_compiled
= WIRELESS_EXT
;
6918 range
->we_version_source
= 18;
6920 // range->retry_capa; /* What retry options are supported */
6921 // range->retry_flags; /* How to decode max/min retry limit */
6922 // range->r_time_flags; /* How to decode max/min retry life */
6923 // range->min_retry; /* Minimal number of retries */
6924 // range->max_retry; /* Maximal number of retries */
6925 // range->min_r_time; /* Minimal retry lifetime */
6926 // range->max_r_time; /* Maximal retry lifetime */
6928 range
->num_channels
= FREQ_COUNT
;
6931 for (i
= 0; i
< FREQ_COUNT
; i
++) {
6932 // TODO: Include only legal frequencies for some countries
6933 // if (local->channel_mask & (1 << i)) {
6934 range
->freq
[val
].i
= i
+ 1;
6935 range
->freq
[val
].m
= ipw2100_frequencies
[i
] * 100000;
6936 range
->freq
[val
].e
= 1;
6939 if (val
== IW_MAX_FREQUENCIES
)
6942 range
->num_frequency
= val
;
6944 /* Event capability (kernel + driver) */
6945 range
->event_capa
[0] = (IW_EVENT_CAPA_K_0
|
6946 IW_EVENT_CAPA_MASK(SIOCGIWAP
));
6947 range
->event_capa
[1] = IW_EVENT_CAPA_K_1
;
6949 range
->enc_capa
= IW_ENC_CAPA_WPA
| IW_ENC_CAPA_WPA2
|
6950 IW_ENC_CAPA_CIPHER_TKIP
| IW_ENC_CAPA_CIPHER_CCMP
;
6952 IPW_DEBUG_WX("GET Range\n");
6957 static int ipw2100_wx_set_wap(struct net_device
*dev
,
6958 struct iw_request_info
*info
,
6959 union iwreq_data
*wrqu
, char *extra
)
6961 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6964 static const unsigned char any
[] = {
6965 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
6967 static const unsigned char off
[] = {
6968 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
6972 if (wrqu
->ap_addr
.sa_family
!= ARPHRD_ETHER
)
6975 mutex_lock(&priv
->action_mutex
);
6976 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6981 if (!memcmp(any
, wrqu
->ap_addr
.sa_data
, ETH_ALEN
) ||
6982 !memcmp(off
, wrqu
->ap_addr
.sa_data
, ETH_ALEN
)) {
6983 /* we disable mandatory BSSID association */
6984 IPW_DEBUG_WX("exit - disable mandatory BSSID\n");
6985 priv
->config
&= ~CFG_STATIC_BSSID
;
6986 err
= ipw2100_set_mandatory_bssid(priv
, NULL
, 0);
6990 priv
->config
|= CFG_STATIC_BSSID
;
6991 memcpy(priv
->mandatory_bssid_mac
, wrqu
->ap_addr
.sa_data
, ETH_ALEN
);
6993 err
= ipw2100_set_mandatory_bssid(priv
, wrqu
->ap_addr
.sa_data
, 0);
6995 IPW_DEBUG_WX("SET BSSID -> %pM\n", wrqu
->ap_addr
.sa_data
);
6998 mutex_unlock(&priv
->action_mutex
);
7002 static int ipw2100_wx_get_wap(struct net_device
*dev
,
7003 struct iw_request_info
*info
,
7004 union iwreq_data
*wrqu
, char *extra
)
7007 * This can be called at any time. No action lock required
7010 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7012 /* If we are associated, trying to associate, or have a statically
7013 * configured BSSID then return that; otherwise return ANY */
7014 if (priv
->config
& CFG_STATIC_BSSID
|| priv
->status
& STATUS_ASSOCIATED
) {
7015 wrqu
->ap_addr
.sa_family
= ARPHRD_ETHER
;
7016 memcpy(wrqu
->ap_addr
.sa_data
, priv
->bssid
, ETH_ALEN
);
7018 memset(wrqu
->ap_addr
.sa_data
, 0, ETH_ALEN
);
7020 IPW_DEBUG_WX("Getting WAP BSSID: %pM\n", wrqu
->ap_addr
.sa_data
);
7024 static int ipw2100_wx_set_essid(struct net_device
*dev
,
7025 struct iw_request_info
*info
,
7026 union iwreq_data
*wrqu
, char *extra
)
7028 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7029 char *essid
= ""; /* ANY */
7032 DECLARE_SSID_BUF(ssid
);
7034 mutex_lock(&priv
->action_mutex
);
7035 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7040 if (wrqu
->essid
.flags
&& wrqu
->essid
.length
) {
7041 length
= wrqu
->essid
.length
;
7046 IPW_DEBUG_WX("Setting ESSID to ANY\n");
7047 priv
->config
&= ~CFG_STATIC_ESSID
;
7048 err
= ipw2100_set_essid(priv
, NULL
, 0, 0);
7052 length
= min(length
, IW_ESSID_MAX_SIZE
);
7054 priv
->config
|= CFG_STATIC_ESSID
;
7056 if (priv
->essid_len
== length
&& !memcmp(priv
->essid
, extra
, length
)) {
7057 IPW_DEBUG_WX("ESSID set to current ESSID.\n");
7062 IPW_DEBUG_WX("Setting ESSID: '%s' (%d)\n",
7063 print_ssid(ssid
, essid
, length
), length
);
7065 priv
->essid_len
= length
;
7066 memcpy(priv
->essid
, essid
, priv
->essid_len
);
7068 err
= ipw2100_set_essid(priv
, essid
, length
, 0);
7071 mutex_unlock(&priv
->action_mutex
);
7075 static int ipw2100_wx_get_essid(struct net_device
*dev
,
7076 struct iw_request_info
*info
,
7077 union iwreq_data
*wrqu
, char *extra
)
7080 * This can be called at any time. No action lock required
7083 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7084 DECLARE_SSID_BUF(ssid
);
7086 /* If we are associated, trying to associate, or have a statically
7087 * configured ESSID then return that; otherwise return ANY */
7088 if (priv
->config
& CFG_STATIC_ESSID
|| priv
->status
& STATUS_ASSOCIATED
) {
7089 IPW_DEBUG_WX("Getting essid: '%s'\n",
7090 print_ssid(ssid
, priv
->essid
, priv
->essid_len
));
7091 memcpy(extra
, priv
->essid
, priv
->essid_len
);
7092 wrqu
->essid
.length
= priv
->essid_len
;
7093 wrqu
->essid
.flags
= 1; /* active */
7095 IPW_DEBUG_WX("Getting essid: ANY\n");
7096 wrqu
->essid
.length
= 0;
7097 wrqu
->essid
.flags
= 0; /* active */
7103 static int ipw2100_wx_set_nick(struct net_device
*dev
,
7104 struct iw_request_info
*info
,
7105 union iwreq_data
*wrqu
, char *extra
)
7108 * This can be called at any time. No action lock required
7111 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7113 if (wrqu
->data
.length
> IW_ESSID_MAX_SIZE
)
7116 wrqu
->data
.length
= min((size_t) wrqu
->data
.length
, sizeof(priv
->nick
));
7117 memset(priv
->nick
, 0, sizeof(priv
->nick
));
7118 memcpy(priv
->nick
, extra
, wrqu
->data
.length
);
7120 IPW_DEBUG_WX("SET Nickname -> %s\n", priv
->nick
);
7125 static int ipw2100_wx_get_nick(struct net_device
*dev
,
7126 struct iw_request_info
*info
,
7127 union iwreq_data
*wrqu
, char *extra
)
7130 * This can be called at any time. No action lock required
7133 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7135 wrqu
->data
.length
= strlen(priv
->nick
);
7136 memcpy(extra
, priv
->nick
, wrqu
->data
.length
);
7137 wrqu
->data
.flags
= 1; /* active */
7139 IPW_DEBUG_WX("GET Nickname -> %s\n", extra
);
7144 static int ipw2100_wx_set_rate(struct net_device
*dev
,
7145 struct iw_request_info
*info
,
7146 union iwreq_data
*wrqu
, char *extra
)
7148 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7149 u32 target_rate
= wrqu
->bitrate
.value
;
7153 mutex_lock(&priv
->action_mutex
);
7154 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7161 if (target_rate
== 1000000 ||
7162 (!wrqu
->bitrate
.fixed
&& target_rate
> 1000000))
7163 rate
|= TX_RATE_1_MBIT
;
7164 if (target_rate
== 2000000 ||
7165 (!wrqu
->bitrate
.fixed
&& target_rate
> 2000000))
7166 rate
|= TX_RATE_2_MBIT
;
7167 if (target_rate
== 5500000 ||
7168 (!wrqu
->bitrate
.fixed
&& target_rate
> 5500000))
7169 rate
|= TX_RATE_5_5_MBIT
;
7170 if (target_rate
== 11000000 ||
7171 (!wrqu
->bitrate
.fixed
&& target_rate
> 11000000))
7172 rate
|= TX_RATE_11_MBIT
;
7174 rate
= DEFAULT_TX_RATES
;
7176 err
= ipw2100_set_tx_rates(priv
, rate
, 0);
7178 IPW_DEBUG_WX("SET Rate -> %04X\n", rate
);
7180 mutex_unlock(&priv
->action_mutex
);
7184 static int ipw2100_wx_get_rate(struct net_device
*dev
,
7185 struct iw_request_info
*info
,
7186 union iwreq_data
*wrqu
, char *extra
)
7188 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7190 unsigned int len
= sizeof(val
);
7193 if (!(priv
->status
& STATUS_ENABLED
) ||
7194 priv
->status
& STATUS_RF_KILL_MASK
||
7195 !(priv
->status
& STATUS_ASSOCIATED
)) {
7196 wrqu
->bitrate
.value
= 0;
7200 mutex_lock(&priv
->action_mutex
);
7201 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7206 err
= ipw2100_get_ordinal(priv
, IPW_ORD_CURRENT_TX_RATE
, &val
, &len
);
7208 IPW_DEBUG_WX("failed querying ordinals.\n");
7212 switch (val
& TX_RATE_MASK
) {
7213 case TX_RATE_1_MBIT
:
7214 wrqu
->bitrate
.value
= 1000000;
7216 case TX_RATE_2_MBIT
:
7217 wrqu
->bitrate
.value
= 2000000;
7219 case TX_RATE_5_5_MBIT
:
7220 wrqu
->bitrate
.value
= 5500000;
7222 case TX_RATE_11_MBIT
:
7223 wrqu
->bitrate
.value
= 11000000;
7226 wrqu
->bitrate
.value
= 0;
7229 IPW_DEBUG_WX("GET Rate -> %d\n", wrqu
->bitrate
.value
);
7232 mutex_unlock(&priv
->action_mutex
);
7236 static int ipw2100_wx_set_rts(struct net_device
*dev
,
7237 struct iw_request_info
*info
,
7238 union iwreq_data
*wrqu
, char *extra
)
7240 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7243 /* Auto RTS not yet supported */
7244 if (wrqu
->rts
.fixed
== 0)
7247 mutex_lock(&priv
->action_mutex
);
7248 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7253 if (wrqu
->rts
.disabled
)
7254 value
= priv
->rts_threshold
| RTS_DISABLED
;
7256 if (wrqu
->rts
.value
< 1 || wrqu
->rts
.value
> 2304) {
7260 value
= wrqu
->rts
.value
;
7263 err
= ipw2100_set_rts_threshold(priv
, value
);
7265 IPW_DEBUG_WX("SET RTS Threshold -> 0x%08X\n", value
);
7267 mutex_unlock(&priv
->action_mutex
);
7271 static int ipw2100_wx_get_rts(struct net_device
*dev
,
7272 struct iw_request_info
*info
,
7273 union iwreq_data
*wrqu
, char *extra
)
7276 * This can be called at any time. No action lock required
7279 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7281 wrqu
->rts
.value
= priv
->rts_threshold
& ~RTS_DISABLED
;
7282 wrqu
->rts
.fixed
= 1; /* no auto select */
7284 /* If RTS is set to the default value, then it is disabled */
7285 wrqu
->rts
.disabled
= (priv
->rts_threshold
& RTS_DISABLED
) ? 1 : 0;
7287 IPW_DEBUG_WX("GET RTS Threshold -> 0x%08X\n", wrqu
->rts
.value
);
7292 static int ipw2100_wx_set_txpow(struct net_device
*dev
,
7293 struct iw_request_info
*info
,
7294 union iwreq_data
*wrqu
, char *extra
)
7296 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7299 if (ipw_radio_kill_sw(priv
, wrqu
->txpower
.disabled
))
7300 return -EINPROGRESS
;
7302 if (priv
->ieee
->iw_mode
!= IW_MODE_ADHOC
)
7305 if ((wrqu
->txpower
.flags
& IW_TXPOW_TYPE
) != IW_TXPOW_DBM
)
7308 if (wrqu
->txpower
.fixed
== 0)
7309 value
= IPW_TX_POWER_DEFAULT
;
7311 if (wrqu
->txpower
.value
< IPW_TX_POWER_MIN_DBM
||
7312 wrqu
->txpower
.value
> IPW_TX_POWER_MAX_DBM
)
7315 value
= wrqu
->txpower
.value
;
7318 mutex_lock(&priv
->action_mutex
);
7319 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7324 err
= ipw2100_set_tx_power(priv
, value
);
7326 IPW_DEBUG_WX("SET TX Power -> %d\n", value
);
7329 mutex_unlock(&priv
->action_mutex
);
7333 static int ipw2100_wx_get_txpow(struct net_device
*dev
,
7334 struct iw_request_info
*info
,
7335 union iwreq_data
*wrqu
, char *extra
)
7338 * This can be called at any time. No action lock required
7341 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7343 wrqu
->txpower
.disabled
= (priv
->status
& STATUS_RF_KILL_MASK
) ? 1 : 0;
7345 if (priv
->tx_power
== IPW_TX_POWER_DEFAULT
) {
7346 wrqu
->txpower
.fixed
= 0;
7347 wrqu
->txpower
.value
= IPW_TX_POWER_MAX_DBM
;
7349 wrqu
->txpower
.fixed
= 1;
7350 wrqu
->txpower
.value
= priv
->tx_power
;
7353 wrqu
->txpower
.flags
= IW_TXPOW_DBM
;
7355 IPW_DEBUG_WX("GET TX Power -> %d\n", wrqu
->txpower
.value
);
7360 static int ipw2100_wx_set_frag(struct net_device
*dev
,
7361 struct iw_request_info
*info
,
7362 union iwreq_data
*wrqu
, char *extra
)
7365 * This can be called at any time. No action lock required
7368 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7370 if (!wrqu
->frag
.fixed
)
7373 if (wrqu
->frag
.disabled
) {
7374 priv
->frag_threshold
|= FRAG_DISABLED
;
7375 priv
->ieee
->fts
= DEFAULT_FTS
;
7377 if (wrqu
->frag
.value
< MIN_FRAG_THRESHOLD
||
7378 wrqu
->frag
.value
> MAX_FRAG_THRESHOLD
)
7381 priv
->ieee
->fts
= wrqu
->frag
.value
& ~0x1;
7382 priv
->frag_threshold
= priv
->ieee
->fts
;
7385 IPW_DEBUG_WX("SET Frag Threshold -> %d\n", priv
->ieee
->fts
);
7390 static int ipw2100_wx_get_frag(struct net_device
*dev
,
7391 struct iw_request_info
*info
,
7392 union iwreq_data
*wrqu
, char *extra
)
7395 * This can be called at any time. No action lock required
7398 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7399 wrqu
->frag
.value
= priv
->frag_threshold
& ~FRAG_DISABLED
;
7400 wrqu
->frag
.fixed
= 0; /* no auto select */
7401 wrqu
->frag
.disabled
= (priv
->frag_threshold
& FRAG_DISABLED
) ? 1 : 0;
7403 IPW_DEBUG_WX("GET Frag Threshold -> %d\n", wrqu
->frag
.value
);
7408 static int ipw2100_wx_set_retry(struct net_device
*dev
,
7409 struct iw_request_info
*info
,
7410 union iwreq_data
*wrqu
, char *extra
)
7412 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7415 if (wrqu
->retry
.flags
& IW_RETRY_LIFETIME
|| wrqu
->retry
.disabled
)
7418 if (!(wrqu
->retry
.flags
& IW_RETRY_LIMIT
))
7421 mutex_lock(&priv
->action_mutex
);
7422 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7427 if (wrqu
->retry
.flags
& IW_RETRY_SHORT
) {
7428 err
= ipw2100_set_short_retry(priv
, wrqu
->retry
.value
);
7429 IPW_DEBUG_WX("SET Short Retry Limit -> %d\n",
7434 if (wrqu
->retry
.flags
& IW_RETRY_LONG
) {
7435 err
= ipw2100_set_long_retry(priv
, wrqu
->retry
.value
);
7436 IPW_DEBUG_WX("SET Long Retry Limit -> %d\n",
7441 err
= ipw2100_set_short_retry(priv
, wrqu
->retry
.value
);
7443 err
= ipw2100_set_long_retry(priv
, wrqu
->retry
.value
);
7445 IPW_DEBUG_WX("SET Both Retry Limits -> %d\n", wrqu
->retry
.value
);
7448 mutex_unlock(&priv
->action_mutex
);
7452 static int ipw2100_wx_get_retry(struct net_device
*dev
,
7453 struct iw_request_info
*info
,
7454 union iwreq_data
*wrqu
, char *extra
)
7457 * This can be called at any time. No action lock required
7460 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7462 wrqu
->retry
.disabled
= 0; /* can't be disabled */
7464 if ((wrqu
->retry
.flags
& IW_RETRY_TYPE
) == IW_RETRY_LIFETIME
)
7467 if (wrqu
->retry
.flags
& IW_RETRY_LONG
) {
7468 wrqu
->retry
.flags
= IW_RETRY_LIMIT
| IW_RETRY_LONG
;
7469 wrqu
->retry
.value
= priv
->long_retry_limit
;
7472 (priv
->short_retry_limit
!=
7473 priv
->long_retry_limit
) ?
7474 IW_RETRY_LIMIT
| IW_RETRY_SHORT
: IW_RETRY_LIMIT
;
7476 wrqu
->retry
.value
= priv
->short_retry_limit
;
7479 IPW_DEBUG_WX("GET Retry -> %d\n", wrqu
->retry
.value
);
7484 static int ipw2100_wx_set_scan(struct net_device
*dev
,
7485 struct iw_request_info
*info
,
7486 union iwreq_data
*wrqu
, char *extra
)
7488 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7491 mutex_lock(&priv
->action_mutex
);
7492 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7497 IPW_DEBUG_WX("Initiating scan...\n");
7499 priv
->user_requested_scan
= 1;
7500 if (ipw2100_set_scan_options(priv
) || ipw2100_start_scan(priv
)) {
7501 IPW_DEBUG_WX("Start scan failed.\n");
7503 /* TODO: Mark a scan as pending so when hardware initialized
7508 mutex_unlock(&priv
->action_mutex
);
7512 static int ipw2100_wx_get_scan(struct net_device
*dev
,
7513 struct iw_request_info
*info
,
7514 union iwreq_data
*wrqu
, char *extra
)
7517 * This can be called at any time. No action lock required
7520 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7521 return libipw_wx_get_scan(priv
->ieee
, info
, wrqu
, extra
);
7525 * Implementation based on code in hostap-driver v0.1.3 hostap_ioctl.c
7527 static int ipw2100_wx_set_encode(struct net_device
*dev
,
7528 struct iw_request_info
*info
,
7529 union iwreq_data
*wrqu
, char *key
)
7532 * No check of STATUS_INITIALIZED required
7535 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7536 return libipw_wx_set_encode(priv
->ieee
, info
, wrqu
, key
);
7539 static int ipw2100_wx_get_encode(struct net_device
*dev
,
7540 struct iw_request_info
*info
,
7541 union iwreq_data
*wrqu
, char *key
)
7544 * This can be called at any time. No action lock required
7547 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7548 return libipw_wx_get_encode(priv
->ieee
, info
, wrqu
, key
);
7551 static int ipw2100_wx_set_power(struct net_device
*dev
,
7552 struct iw_request_info
*info
,
7553 union iwreq_data
*wrqu
, char *extra
)
7555 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7558 mutex_lock(&priv
->action_mutex
);
7559 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7564 if (wrqu
->power
.disabled
) {
7565 priv
->power_mode
= IPW_POWER_LEVEL(priv
->power_mode
);
7566 err
= ipw2100_set_power_mode(priv
, IPW_POWER_MODE_CAM
);
7567 IPW_DEBUG_WX("SET Power Management Mode -> off\n");
7571 switch (wrqu
->power
.flags
& IW_POWER_MODE
) {
7572 case IW_POWER_ON
: /* If not specified */
7573 case IW_POWER_MODE
: /* If set all mask */
7574 case IW_POWER_ALL_R
: /* If explicitly state all */
7576 default: /* Otherwise we don't support it */
7577 IPW_DEBUG_WX("SET PM Mode: %X not supported.\n",
7583 /* If the user hasn't specified a power management mode yet, default
7585 priv
->power_mode
= IPW_POWER_ENABLED
| priv
->power_mode
;
7586 err
= ipw2100_set_power_mode(priv
, IPW_POWER_LEVEL(priv
->power_mode
));
7588 IPW_DEBUG_WX("SET Power Management Mode -> 0x%02X\n", priv
->power_mode
);
7591 mutex_unlock(&priv
->action_mutex
);
7596 static int ipw2100_wx_get_power(struct net_device
*dev
,
7597 struct iw_request_info
*info
,
7598 union iwreq_data
*wrqu
, char *extra
)
7601 * This can be called at any time. No action lock required
7604 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7606 if (!(priv
->power_mode
& IPW_POWER_ENABLED
))
7607 wrqu
->power
.disabled
= 1;
7609 wrqu
->power
.disabled
= 0;
7610 wrqu
->power
.flags
= 0;
7613 IPW_DEBUG_WX("GET Power Management Mode -> %02X\n", priv
->power_mode
);
7623 static int ipw2100_wx_set_genie(struct net_device
*dev
,
7624 struct iw_request_info
*info
,
7625 union iwreq_data
*wrqu
, char *extra
)
7628 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7629 struct libipw_device
*ieee
= priv
->ieee
;
7632 if (!ieee
->wpa_enabled
)
7635 if (wrqu
->data
.length
> MAX_WPA_IE_LEN
||
7636 (wrqu
->data
.length
&& extra
== NULL
))
7639 if (wrqu
->data
.length
) {
7640 buf
= kmemdup(extra
, wrqu
->data
.length
, GFP_KERNEL
);
7644 kfree(ieee
->wpa_ie
);
7646 ieee
->wpa_ie_len
= wrqu
->data
.length
;
7648 kfree(ieee
->wpa_ie
);
7649 ieee
->wpa_ie
= NULL
;
7650 ieee
->wpa_ie_len
= 0;
7653 ipw2100_wpa_assoc_frame(priv
, ieee
->wpa_ie
, ieee
->wpa_ie_len
);
7659 static int ipw2100_wx_get_genie(struct net_device
*dev
,
7660 struct iw_request_info
*info
,
7661 union iwreq_data
*wrqu
, char *extra
)
7663 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7664 struct libipw_device
*ieee
= priv
->ieee
;
7666 if (ieee
->wpa_ie_len
== 0 || ieee
->wpa_ie
== NULL
) {
7667 wrqu
->data
.length
= 0;
7671 if (wrqu
->data
.length
< ieee
->wpa_ie_len
)
7674 wrqu
->data
.length
= ieee
->wpa_ie_len
;
7675 memcpy(extra
, ieee
->wpa_ie
, ieee
->wpa_ie_len
);
7681 static int ipw2100_wx_set_auth(struct net_device
*dev
,
7682 struct iw_request_info
*info
,
7683 union iwreq_data
*wrqu
, char *extra
)
7685 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7686 struct libipw_device
*ieee
= priv
->ieee
;
7687 struct iw_param
*param
= &wrqu
->param
;
7688 struct lib80211_crypt_data
*crypt
;
7689 unsigned long flags
;
7692 switch (param
->flags
& IW_AUTH_INDEX
) {
7693 case IW_AUTH_WPA_VERSION
:
7694 case IW_AUTH_CIPHER_PAIRWISE
:
7695 case IW_AUTH_CIPHER_GROUP
:
7696 case IW_AUTH_KEY_MGMT
:
7698 * ipw2200 does not use these parameters
7702 case IW_AUTH_TKIP_COUNTERMEASURES
:
7703 crypt
= priv
->ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
];
7704 if (!crypt
|| !crypt
->ops
->set_flags
|| !crypt
->ops
->get_flags
)
7707 flags
= crypt
->ops
->get_flags(crypt
->priv
);
7710 flags
|= IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
;
7712 flags
&= ~IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
;
7714 crypt
->ops
->set_flags(flags
, crypt
->priv
);
7718 case IW_AUTH_DROP_UNENCRYPTED
:{
7721 * wpa_supplicant calls set_wpa_enabled when the driver
7722 * is loaded and unloaded, regardless of if WPA is being
7723 * used. No other calls are made which can be used to
7724 * determine if encryption will be used or not prior to
7725 * association being expected. If encryption is not being
7726 * used, drop_unencrypted is set to false, else true -- we
7727 * can use this to determine if the CAP_PRIVACY_ON bit should
7730 struct libipw_security sec
= {
7731 .flags
= SEC_ENABLED
,
7732 .enabled
= param
->value
,
7734 priv
->ieee
->drop_unencrypted
= param
->value
;
7735 /* We only change SEC_LEVEL for open mode. Others
7736 * are set by ipw_wpa_set_encryption.
7738 if (!param
->value
) {
7739 sec
.flags
|= SEC_LEVEL
;
7740 sec
.level
= SEC_LEVEL_0
;
7742 sec
.flags
|= SEC_LEVEL
;
7743 sec
.level
= SEC_LEVEL_1
;
7745 if (priv
->ieee
->set_security
)
7746 priv
->ieee
->set_security(priv
->ieee
->dev
, &sec
);
7750 case IW_AUTH_80211_AUTH_ALG
:
7751 ret
= ipw2100_wpa_set_auth_algs(priv
, param
->value
);
7754 case IW_AUTH_WPA_ENABLED
:
7755 ret
= ipw2100_wpa_enable(priv
, param
->value
);
7758 case IW_AUTH_RX_UNENCRYPTED_EAPOL
:
7759 ieee
->ieee802_1x
= param
->value
;
7762 //case IW_AUTH_ROAMING_CONTROL:
7763 case IW_AUTH_PRIVACY_INVOKED
:
7764 ieee
->privacy_invoked
= param
->value
;
7774 static int ipw2100_wx_get_auth(struct net_device
*dev
,
7775 struct iw_request_info
*info
,
7776 union iwreq_data
*wrqu
, char *extra
)
7778 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7779 struct libipw_device
*ieee
= priv
->ieee
;
7780 struct lib80211_crypt_data
*crypt
;
7781 struct iw_param
*param
= &wrqu
->param
;
7784 switch (param
->flags
& IW_AUTH_INDEX
) {
7785 case IW_AUTH_WPA_VERSION
:
7786 case IW_AUTH_CIPHER_PAIRWISE
:
7787 case IW_AUTH_CIPHER_GROUP
:
7788 case IW_AUTH_KEY_MGMT
:
7790 * wpa_supplicant will control these internally
7795 case IW_AUTH_TKIP_COUNTERMEASURES
:
7796 crypt
= priv
->ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
];
7797 if (!crypt
|| !crypt
->ops
->get_flags
) {
7798 IPW_DEBUG_WARNING("Can't get TKIP countermeasures: "
7799 "crypt not set!\n");
7803 param
->value
= (crypt
->ops
->get_flags(crypt
->priv
) &
7804 IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
) ? 1 : 0;
7808 case IW_AUTH_DROP_UNENCRYPTED
:
7809 param
->value
= ieee
->drop_unencrypted
;
7812 case IW_AUTH_80211_AUTH_ALG
:
7813 param
->value
= priv
->ieee
->sec
.auth_mode
;
7816 case IW_AUTH_WPA_ENABLED
:
7817 param
->value
= ieee
->wpa_enabled
;
7820 case IW_AUTH_RX_UNENCRYPTED_EAPOL
:
7821 param
->value
= ieee
->ieee802_1x
;
7824 case IW_AUTH_ROAMING_CONTROL
:
7825 case IW_AUTH_PRIVACY_INVOKED
:
7826 param
->value
= ieee
->privacy_invoked
;
7835 /* SIOCSIWENCODEEXT */
7836 static int ipw2100_wx_set_encodeext(struct net_device
*dev
,
7837 struct iw_request_info
*info
,
7838 union iwreq_data
*wrqu
, char *extra
)
7840 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7841 return libipw_wx_set_encodeext(priv
->ieee
, info
, wrqu
, extra
);
7844 /* SIOCGIWENCODEEXT */
7845 static int ipw2100_wx_get_encodeext(struct net_device
*dev
,
7846 struct iw_request_info
*info
,
7847 union iwreq_data
*wrqu
, char *extra
)
7849 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7850 return libipw_wx_get_encodeext(priv
->ieee
, info
, wrqu
, extra
);
7854 static int ipw2100_wx_set_mlme(struct net_device
*dev
,
7855 struct iw_request_info
*info
,
7856 union iwreq_data
*wrqu
, char *extra
)
7858 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7859 struct iw_mlme
*mlme
= (struct iw_mlme
*)extra
;
7862 reason
= cpu_to_le16(mlme
->reason_code
);
7864 switch (mlme
->cmd
) {
7865 case IW_MLME_DEAUTH
:
7869 case IW_MLME_DISASSOC
:
7870 ipw2100_disassociate_bssid(priv
);
7884 #ifdef CONFIG_IPW2100_MONITOR
7885 static int ipw2100_wx_set_promisc(struct net_device
*dev
,
7886 struct iw_request_info
*info
,
7887 union iwreq_data
*wrqu
, char *extra
)
7889 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7890 int *parms
= (int *)extra
;
7891 int enable
= (parms
[0] > 0);
7894 mutex_lock(&priv
->action_mutex
);
7895 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7901 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
7902 err
= ipw2100_set_channel(priv
, parms
[1], 0);
7905 priv
->channel
= parms
[1];
7906 err
= ipw2100_switch_mode(priv
, IW_MODE_MONITOR
);
7908 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
7909 err
= ipw2100_switch_mode(priv
, priv
->last_mode
);
7912 mutex_unlock(&priv
->action_mutex
);
7916 static int ipw2100_wx_reset(struct net_device
*dev
,
7917 struct iw_request_info
*info
,
7918 union iwreq_data
*wrqu
, char *extra
)
7920 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7921 if (priv
->status
& STATUS_INITIALIZED
)
7922 schedule_reset(priv
);
7928 static int ipw2100_wx_set_powermode(struct net_device
*dev
,
7929 struct iw_request_info
*info
,
7930 union iwreq_data
*wrqu
, char *extra
)
7932 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7933 int err
= 0, mode
= *(int *)extra
;
7935 mutex_lock(&priv
->action_mutex
);
7936 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7941 if ((mode
< 0) || (mode
> POWER_MODES
))
7942 mode
= IPW_POWER_AUTO
;
7944 if (IPW_POWER_LEVEL(priv
->power_mode
) != mode
)
7945 err
= ipw2100_set_power_mode(priv
, mode
);
7947 mutex_unlock(&priv
->action_mutex
);
7951 #define MAX_POWER_STRING 80
7952 static int ipw2100_wx_get_powermode(struct net_device
*dev
,
7953 struct iw_request_info
*info
,
7954 union iwreq_data
*wrqu
, char *extra
)
7957 * This can be called at any time. No action lock required
7960 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7961 int level
= IPW_POWER_LEVEL(priv
->power_mode
);
7962 s32 timeout
, period
;
7964 if (!(priv
->power_mode
& IPW_POWER_ENABLED
)) {
7965 snprintf(extra
, MAX_POWER_STRING
,
7966 "Power save level: %d (Off)", level
);
7969 case IPW_POWER_MODE_CAM
:
7970 snprintf(extra
, MAX_POWER_STRING
,
7971 "Power save level: %d (None)", level
);
7973 case IPW_POWER_AUTO
:
7974 snprintf(extra
, MAX_POWER_STRING
,
7975 "Power save level: %d (Auto)", level
);
7978 timeout
= timeout_duration
[level
- 1] / 1000;
7979 period
= period_duration
[level
- 1] / 1000;
7980 snprintf(extra
, MAX_POWER_STRING
,
7981 "Power save level: %d "
7982 "(Timeout %dms, Period %dms)",
7983 level
, timeout
, period
);
7987 wrqu
->data
.length
= strlen(extra
) + 1;
7992 static int ipw2100_wx_set_preamble(struct net_device
*dev
,
7993 struct iw_request_info
*info
,
7994 union iwreq_data
*wrqu
, char *extra
)
7996 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7997 int err
, mode
= *(int *)extra
;
7999 mutex_lock(&priv
->action_mutex
);
8000 if (!(priv
->status
& STATUS_INITIALIZED
)) {
8006 priv
->config
|= CFG_LONG_PREAMBLE
;
8008 priv
->config
&= ~CFG_LONG_PREAMBLE
;
8014 err
= ipw2100_system_config(priv
, 0);
8017 mutex_unlock(&priv
->action_mutex
);
8021 static int ipw2100_wx_get_preamble(struct net_device
*dev
,
8022 struct iw_request_info
*info
,
8023 union iwreq_data
*wrqu
, char *extra
)
8026 * This can be called at any time. No action lock required
8029 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8031 if (priv
->config
& CFG_LONG_PREAMBLE
)
8032 snprintf(wrqu
->name
, IFNAMSIZ
, "long (1)");
8034 snprintf(wrqu
->name
, IFNAMSIZ
, "auto (0)");
8039 #ifdef CONFIG_IPW2100_MONITOR
8040 static int ipw2100_wx_set_crc_check(struct net_device
*dev
,
8041 struct iw_request_info
*info
,
8042 union iwreq_data
*wrqu
, char *extra
)
8044 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8045 int err
, mode
= *(int *)extra
;
8047 mutex_lock(&priv
->action_mutex
);
8048 if (!(priv
->status
& STATUS_INITIALIZED
)) {
8054 priv
->config
|= CFG_CRC_CHECK
;
8056 priv
->config
&= ~CFG_CRC_CHECK
;
8064 mutex_unlock(&priv
->action_mutex
);
8068 static int ipw2100_wx_get_crc_check(struct net_device
*dev
,
8069 struct iw_request_info
*info
,
8070 union iwreq_data
*wrqu
, char *extra
)
8073 * This can be called at any time. No action lock required
8076 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8078 if (priv
->config
& CFG_CRC_CHECK
)
8079 snprintf(wrqu
->name
, IFNAMSIZ
, "CRC checked (1)");
8081 snprintf(wrqu
->name
, IFNAMSIZ
, "CRC ignored (0)");
8085 #endif /* CONFIG_IPW2100_MONITOR */
8087 static iw_handler ipw2100_wx_handlers
[] = {
8088 IW_HANDLER(SIOCGIWNAME
, ipw2100_wx_get_name
),
8089 IW_HANDLER(SIOCSIWFREQ
, ipw2100_wx_set_freq
),
8090 IW_HANDLER(SIOCGIWFREQ
, ipw2100_wx_get_freq
),
8091 IW_HANDLER(SIOCSIWMODE
, ipw2100_wx_set_mode
),
8092 IW_HANDLER(SIOCGIWMODE
, ipw2100_wx_get_mode
),
8093 IW_HANDLER(SIOCGIWRANGE
, ipw2100_wx_get_range
),
8094 IW_HANDLER(SIOCSIWAP
, ipw2100_wx_set_wap
),
8095 IW_HANDLER(SIOCGIWAP
, ipw2100_wx_get_wap
),
8096 IW_HANDLER(SIOCSIWMLME
, ipw2100_wx_set_mlme
),
8097 IW_HANDLER(SIOCSIWSCAN
, ipw2100_wx_set_scan
),
8098 IW_HANDLER(SIOCGIWSCAN
, ipw2100_wx_get_scan
),
8099 IW_HANDLER(SIOCSIWESSID
, ipw2100_wx_set_essid
),
8100 IW_HANDLER(SIOCGIWESSID
, ipw2100_wx_get_essid
),
8101 IW_HANDLER(SIOCSIWNICKN
, ipw2100_wx_set_nick
),
8102 IW_HANDLER(SIOCGIWNICKN
, ipw2100_wx_get_nick
),
8103 IW_HANDLER(SIOCSIWRATE
, ipw2100_wx_set_rate
),
8104 IW_HANDLER(SIOCGIWRATE
, ipw2100_wx_get_rate
),
8105 IW_HANDLER(SIOCSIWRTS
, ipw2100_wx_set_rts
),
8106 IW_HANDLER(SIOCGIWRTS
, ipw2100_wx_get_rts
),
8107 IW_HANDLER(SIOCSIWFRAG
, ipw2100_wx_set_frag
),
8108 IW_HANDLER(SIOCGIWFRAG
, ipw2100_wx_get_frag
),
8109 IW_HANDLER(SIOCSIWTXPOW
, ipw2100_wx_set_txpow
),
8110 IW_HANDLER(SIOCGIWTXPOW
, ipw2100_wx_get_txpow
),
8111 IW_HANDLER(SIOCSIWRETRY
, ipw2100_wx_set_retry
),
8112 IW_HANDLER(SIOCGIWRETRY
, ipw2100_wx_get_retry
),
8113 IW_HANDLER(SIOCSIWENCODE
, ipw2100_wx_set_encode
),
8114 IW_HANDLER(SIOCGIWENCODE
, ipw2100_wx_get_encode
),
8115 IW_HANDLER(SIOCSIWPOWER
, ipw2100_wx_set_power
),
8116 IW_HANDLER(SIOCGIWPOWER
, ipw2100_wx_get_power
),
8117 IW_HANDLER(SIOCSIWGENIE
, ipw2100_wx_set_genie
),
8118 IW_HANDLER(SIOCGIWGENIE
, ipw2100_wx_get_genie
),
8119 IW_HANDLER(SIOCSIWAUTH
, ipw2100_wx_set_auth
),
8120 IW_HANDLER(SIOCGIWAUTH
, ipw2100_wx_get_auth
),
8121 IW_HANDLER(SIOCSIWENCODEEXT
, ipw2100_wx_set_encodeext
),
8122 IW_HANDLER(SIOCGIWENCODEEXT
, ipw2100_wx_get_encodeext
),
8125 #define IPW2100_PRIV_SET_MONITOR SIOCIWFIRSTPRIV
8126 #define IPW2100_PRIV_RESET SIOCIWFIRSTPRIV+1
8127 #define IPW2100_PRIV_SET_POWER SIOCIWFIRSTPRIV+2
8128 #define IPW2100_PRIV_GET_POWER SIOCIWFIRSTPRIV+3
8129 #define IPW2100_PRIV_SET_LONGPREAMBLE SIOCIWFIRSTPRIV+4
8130 #define IPW2100_PRIV_GET_LONGPREAMBLE SIOCIWFIRSTPRIV+5
8131 #define IPW2100_PRIV_SET_CRC_CHECK SIOCIWFIRSTPRIV+6
8132 #define IPW2100_PRIV_GET_CRC_CHECK SIOCIWFIRSTPRIV+7
8134 static const struct iw_priv_args ipw2100_private_args
[] = {
8136 #ifdef CONFIG_IPW2100_MONITOR
8138 IPW2100_PRIV_SET_MONITOR
,
8139 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 2, 0, "monitor"},
8142 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 0, 0, "reset"},
8143 #endif /* CONFIG_IPW2100_MONITOR */
8146 IPW2100_PRIV_SET_POWER
,
8147 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_power"},
8149 IPW2100_PRIV_GET_POWER
,
8150 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| MAX_POWER_STRING
,
8153 IPW2100_PRIV_SET_LONGPREAMBLE
,
8154 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_preamble"},
8156 IPW2100_PRIV_GET_LONGPREAMBLE
,
8157 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| IFNAMSIZ
, "get_preamble"},
8158 #ifdef CONFIG_IPW2100_MONITOR
8160 IPW2100_PRIV_SET_CRC_CHECK
,
8161 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_crc_check"},
8163 IPW2100_PRIV_GET_CRC_CHECK
,
8164 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| IFNAMSIZ
, "get_crc_check"},
8165 #endif /* CONFIG_IPW2100_MONITOR */
8168 static iw_handler ipw2100_private_handler
[] = {
8169 #ifdef CONFIG_IPW2100_MONITOR
8170 ipw2100_wx_set_promisc
,
8172 #else /* CONFIG_IPW2100_MONITOR */
8175 #endif /* CONFIG_IPW2100_MONITOR */
8176 ipw2100_wx_set_powermode
,
8177 ipw2100_wx_get_powermode
,
8178 ipw2100_wx_set_preamble
,
8179 ipw2100_wx_get_preamble
,
8180 #ifdef CONFIG_IPW2100_MONITOR
8181 ipw2100_wx_set_crc_check
,
8182 ipw2100_wx_get_crc_check
,
8183 #else /* CONFIG_IPW2100_MONITOR */
8186 #endif /* CONFIG_IPW2100_MONITOR */
8190 * Get wireless statistics.
8191 * Called by /proc/net/wireless
8192 * Also called by SIOCGIWSTATS
8194 static struct iw_statistics
*ipw2100_wx_wireless_stats(struct net_device
*dev
)
8209 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8210 struct iw_statistics
*wstats
;
8211 u32 rssi
, tx_retries
, missed_beacons
, tx_failures
;
8212 u32 ord_len
= sizeof(u32
);
8215 return (struct iw_statistics
*)NULL
;
8217 wstats
= &priv
->wstats
;
8219 /* if hw is disabled, then ipw2100_get_ordinal() can't be called.
8220 * ipw2100_wx_wireless_stats seems to be called before fw is
8221 * initialized. STATUS_ASSOCIATED will only be set if the hw is up
8222 * and associated; if not associcated, the values are all meaningless
8223 * anyway, so set them all to NULL and INVALID */
8224 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8225 wstats
->miss
.beacon
= 0;
8226 wstats
->discard
.retries
= 0;
8227 wstats
->qual
.qual
= 0;
8228 wstats
->qual
.level
= 0;
8229 wstats
->qual
.noise
= 0;
8230 wstats
->qual
.updated
= 7;
8231 wstats
->qual
.updated
|= IW_QUAL_NOISE_INVALID
|
8232 IW_QUAL_QUAL_INVALID
| IW_QUAL_LEVEL_INVALID
;
8236 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_PERCENT_MISSED_BCNS
,
8237 &missed_beacons
, &ord_len
))
8238 goto fail_get_ordinal
;
8240 /* If we don't have a connection the quality and level is 0 */
8241 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8242 wstats
->qual
.qual
= 0;
8243 wstats
->qual
.level
= 0;
8245 if (ipw2100_get_ordinal(priv
, IPW_ORD_RSSI_AVG_CURR
,
8247 goto fail_get_ordinal
;
8248 wstats
->qual
.level
= rssi
+ IPW2100_RSSI_TO_DBM
;
8250 rssi_qual
= rssi
* POOR
/ 10;
8252 rssi_qual
= (rssi
- 10) * (FAIR
- POOR
) / 5 + POOR
;
8254 rssi_qual
= (rssi
- 15) * (GOOD
- FAIR
) / 5 + FAIR
;
8256 rssi_qual
= (rssi
- 20) * (VERY_GOOD
- GOOD
) /
8259 rssi_qual
= (rssi
- 30) * (PERFECT
- VERY_GOOD
) /
8262 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_PERCENT_RETRIES
,
8263 &tx_retries
, &ord_len
))
8264 goto fail_get_ordinal
;
8266 if (tx_retries
> 75)
8267 tx_qual
= (90 - tx_retries
) * POOR
/ 15;
8268 else if (tx_retries
> 70)
8269 tx_qual
= (75 - tx_retries
) * (FAIR
- POOR
) / 5 + POOR
;
8270 else if (tx_retries
> 65)
8271 tx_qual
= (70 - tx_retries
) * (GOOD
- FAIR
) / 5 + FAIR
;
8272 else if (tx_retries
> 50)
8273 tx_qual
= (65 - tx_retries
) * (VERY_GOOD
- GOOD
) /
8276 tx_qual
= (50 - tx_retries
) *
8277 (PERFECT
- VERY_GOOD
) / 50 + VERY_GOOD
;
8279 if (missed_beacons
> 50)
8280 beacon_qual
= (60 - missed_beacons
) * POOR
/ 10;
8281 else if (missed_beacons
> 40)
8282 beacon_qual
= (50 - missed_beacons
) * (FAIR
- POOR
) /
8284 else if (missed_beacons
> 32)
8285 beacon_qual
= (40 - missed_beacons
) * (GOOD
- FAIR
) /
8287 else if (missed_beacons
> 20)
8288 beacon_qual
= (32 - missed_beacons
) *
8289 (VERY_GOOD
- GOOD
) / 20 + GOOD
;
8291 beacon_qual
= (20 - missed_beacons
) *
8292 (PERFECT
- VERY_GOOD
) / 20 + VERY_GOOD
;
8294 quality
= min(tx_qual
, rssi_qual
);
8295 quality
= min(beacon_qual
, quality
);
8297 #ifdef CONFIG_IPW2100_DEBUG
8298 if (beacon_qual
== quality
)
8299 IPW_DEBUG_WX("Quality clamped by Missed Beacons\n");
8300 else if (tx_qual
== quality
)
8301 IPW_DEBUG_WX("Quality clamped by Tx Retries\n");
8302 else if (quality
!= 100)
8303 IPW_DEBUG_WX("Quality clamped by Signal Strength\n");
8305 IPW_DEBUG_WX("Quality not clamped.\n");
8308 wstats
->qual
.qual
= quality
;
8309 wstats
->qual
.level
= rssi
+ IPW2100_RSSI_TO_DBM
;
8312 wstats
->qual
.noise
= 0;
8313 wstats
->qual
.updated
= 7;
8314 wstats
->qual
.updated
|= IW_QUAL_NOISE_INVALID
;
8316 /* FIXME: this is percent and not a # */
8317 wstats
->miss
.beacon
= missed_beacons
;
8319 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_TX_FAILURES
,
8320 &tx_failures
, &ord_len
))
8321 goto fail_get_ordinal
;
8322 wstats
->discard
.retries
= tx_failures
;
8327 IPW_DEBUG_WX("failed querying ordinals.\n");
8329 return (struct iw_statistics
*)NULL
;
8332 static struct iw_handler_def ipw2100_wx_handler_def
= {
8333 .standard
= ipw2100_wx_handlers
,
8334 .num_standard
= ARRAY_SIZE(ipw2100_wx_handlers
),
8335 .num_private
= ARRAY_SIZE(ipw2100_private_handler
),
8336 .num_private_args
= ARRAY_SIZE(ipw2100_private_args
),
8337 .private = (iw_handler
*) ipw2100_private_handler
,
8338 .private_args
= (struct iw_priv_args
*)ipw2100_private_args
,
8339 .get_wireless_stats
= ipw2100_wx_wireless_stats
,
8342 static void ipw2100_wx_event_work(struct work_struct
*work
)
8344 struct ipw2100_priv
*priv
=
8345 container_of(work
, struct ipw2100_priv
, wx_event_work
.work
);
8346 union iwreq_data wrqu
;
8347 unsigned int len
= ETH_ALEN
;
8349 if (priv
->status
& STATUS_STOPPING
)
8352 mutex_lock(&priv
->action_mutex
);
8354 IPW_DEBUG_WX("enter\n");
8356 mutex_unlock(&priv
->action_mutex
);
8358 wrqu
.ap_addr
.sa_family
= ARPHRD_ETHER
;
8360 /* Fetch BSSID from the hardware */
8361 if (!(priv
->status
& (STATUS_ASSOCIATING
| STATUS_ASSOCIATED
)) ||
8362 priv
->status
& STATUS_RF_KILL_MASK
||
8363 ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
,
8364 &priv
->bssid
, &len
)) {
8365 memset(wrqu
.ap_addr
.sa_data
, 0, ETH_ALEN
);
8367 /* We now have the BSSID, so can finish setting to the full
8368 * associated state */
8369 memcpy(wrqu
.ap_addr
.sa_data
, priv
->bssid
, ETH_ALEN
);
8370 memcpy(priv
->ieee
->bssid
, priv
->bssid
, ETH_ALEN
);
8371 priv
->status
&= ~STATUS_ASSOCIATING
;
8372 priv
->status
|= STATUS_ASSOCIATED
;
8373 netif_carrier_on(priv
->net_dev
);
8374 netif_wake_queue(priv
->net_dev
);
8377 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8378 IPW_DEBUG_WX("Configuring ESSID\n");
8379 mutex_lock(&priv
->action_mutex
);
8380 /* This is a disassociation event, so kick the firmware to
8381 * look for another AP */
8382 if (priv
->config
& CFG_STATIC_ESSID
)
8383 ipw2100_set_essid(priv
, priv
->essid
, priv
->essid_len
,
8386 ipw2100_set_essid(priv
, NULL
, 0, 0);
8387 mutex_unlock(&priv
->action_mutex
);
8390 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
8393 #define IPW2100_FW_MAJOR_VERSION 1
8394 #define IPW2100_FW_MINOR_VERSION 3
8396 #define IPW2100_FW_MINOR(x) ((x & 0xff) >> 8)
8397 #define IPW2100_FW_MAJOR(x) (x & 0xff)
8399 #define IPW2100_FW_VERSION ((IPW2100_FW_MINOR_VERSION << 8) | \
8400 IPW2100_FW_MAJOR_VERSION)
8402 #define IPW2100_FW_PREFIX "ipw2100-" __stringify(IPW2100_FW_MAJOR_VERSION) \
8403 "." __stringify(IPW2100_FW_MINOR_VERSION)
8405 #define IPW2100_FW_NAME(x) IPW2100_FW_PREFIX "" x ".fw"
8409 BINARY FIRMWARE HEADER FORMAT
8413 2 2 mode == 0:BSS,1:IBSS,2:MONITOR
8416 C fw_len firmware data
8417 12 + fw_len uc_len microcode data
8421 struct ipw2100_fw_header
{
8424 unsigned int fw_size
;
8425 unsigned int uc_size
;
8428 static int ipw2100_mod_firmware_load(struct ipw2100_fw
*fw
)
8430 struct ipw2100_fw_header
*h
=
8431 (struct ipw2100_fw_header
*)fw
->fw_entry
->data
;
8433 if (IPW2100_FW_MAJOR(h
->version
) != IPW2100_FW_MAJOR_VERSION
) {
8434 printk(KERN_WARNING DRV_NAME
": Firmware image not compatible "
8435 "(detected version id of %u). "
8436 "See Documentation/networking/README.ipw2100\n",
8441 fw
->version
= h
->version
;
8442 fw
->fw
.data
= fw
->fw_entry
->data
+ sizeof(struct ipw2100_fw_header
);
8443 fw
->fw
.size
= h
->fw_size
;
8444 fw
->uc
.data
= fw
->fw
.data
+ h
->fw_size
;
8445 fw
->uc
.size
= h
->uc_size
;
8450 static int ipw2100_get_firmware(struct ipw2100_priv
*priv
,
8451 struct ipw2100_fw
*fw
)
8456 IPW_DEBUG_INFO("%s: Using hotplug firmware load.\n",
8457 priv
->net_dev
->name
);
8459 switch (priv
->ieee
->iw_mode
) {
8461 fw_name
= IPW2100_FW_NAME("-i");
8463 #ifdef CONFIG_IPW2100_MONITOR
8464 case IW_MODE_MONITOR
:
8465 fw_name
= IPW2100_FW_NAME("-p");
8470 fw_name
= IPW2100_FW_NAME("");
8474 rc
= request_firmware(&fw
->fw_entry
, fw_name
, &priv
->pci_dev
->dev
);
8477 printk(KERN_ERR DRV_NAME
": "
8478 "%s: Firmware '%s' not available or load failed.\n",
8479 priv
->net_dev
->name
, fw_name
);
8482 IPW_DEBUG_INFO("firmware data %p size %zd\n", fw
->fw_entry
->data
,
8483 fw
->fw_entry
->size
);
8485 ipw2100_mod_firmware_load(fw
);
8490 MODULE_FIRMWARE(IPW2100_FW_NAME("-i"));
8491 #ifdef CONFIG_IPW2100_MONITOR
8492 MODULE_FIRMWARE(IPW2100_FW_NAME("-p"));
8494 MODULE_FIRMWARE(IPW2100_FW_NAME(""));
8496 static void ipw2100_release_firmware(struct ipw2100_priv
*priv
,
8497 struct ipw2100_fw
*fw
)
8500 release_firmware(fw
->fw_entry
);
8501 fw
->fw_entry
= NULL
;
8504 static int ipw2100_get_fwversion(struct ipw2100_priv
*priv
, char *buf
,
8507 char ver
[MAX_FW_VERSION_LEN
];
8508 u32 len
= MAX_FW_VERSION_LEN
;
8511 /* firmware version is an ascii string (max len of 14) */
8512 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_FW_VER_NUM
, ver
, &len
))
8517 for (i
= 0; i
< len
; i
++)
8523 static int ipw2100_get_ucodeversion(struct ipw2100_priv
*priv
, char *buf
,
8527 u32 len
= sizeof(ver
);
8528 /* microcode version is a 32 bit integer */
8529 if (ipw2100_get_ordinal(priv
, IPW_ORD_UCODE_VERSION
, &ver
, &len
))
8531 return snprintf(buf
, max
, "%08X", ver
);
8535 * On exit, the firmware will have been freed from the fw list
8537 static int ipw2100_fw_download(struct ipw2100_priv
*priv
, struct ipw2100_fw
*fw
)
8539 /* firmware is constructed of N contiguous entries, each entry is
8543 * 0 4 address to write to
8544 * 4 2 length of data run
8550 const unsigned char *firmware_data
= fw
->fw
.data
;
8551 unsigned int firmware_data_left
= fw
->fw
.size
;
8553 while (firmware_data_left
> 0) {
8554 addr
= *(u32
*) (firmware_data
);
8556 firmware_data_left
-= 4;
8558 len
= *(u16
*) (firmware_data
);
8560 firmware_data_left
-= 2;
8563 printk(KERN_ERR DRV_NAME
": "
8564 "Invalid firmware run-length of %d bytes\n",
8569 write_nic_memory(priv
->net_dev
, addr
, len
, firmware_data
);
8570 firmware_data
+= len
;
8571 firmware_data_left
-= len
;
8577 struct symbol_alive_response
{
8586 u16 clock_settle_time
; // 1us LSB
8587 u16 powerup_settle_time
; // 1us LSB
8588 u16 hop_settle_time
; // 1us LSB
8589 u8 date
[3]; // month, day, year
8590 u8 time
[2]; // hours, minutes
8594 static int ipw2100_ucode_download(struct ipw2100_priv
*priv
,
8595 struct ipw2100_fw
*fw
)
8597 struct net_device
*dev
= priv
->net_dev
;
8598 const unsigned char *microcode_data
= fw
->uc
.data
;
8599 unsigned int microcode_data_left
= fw
->uc
.size
;
8600 void __iomem
*reg
= priv
->ioaddr
;
8602 struct symbol_alive_response response
;
8606 /* Symbol control */
8607 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x703);
8609 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x707);
8613 write_nic_byte(dev
, 0x210014, 0x72); /* fifo width =16 */
8615 write_nic_byte(dev
, 0x210014, 0x72); /* fifo width =16 */
8618 /* EN_CS_ACCESS bit to reset control store pointer */
8619 write_nic_byte(dev
, 0x210000, 0x40);
8621 write_nic_byte(dev
, 0x210000, 0x0);
8623 write_nic_byte(dev
, 0x210000, 0x40);
8626 /* copy microcode from buffer into Symbol */
8628 while (microcode_data_left
> 0) {
8629 write_nic_byte(dev
, 0x210010, *microcode_data
++);
8630 write_nic_byte(dev
, 0x210010, *microcode_data
++);
8631 microcode_data_left
-= 2;
8634 /* EN_CS_ACCESS bit to reset the control store pointer */
8635 write_nic_byte(dev
, 0x210000, 0x0);
8638 /* Enable System (Reg 0)
8639 * first enable causes garbage in RX FIFO */
8640 write_nic_byte(dev
, 0x210000, 0x0);
8642 write_nic_byte(dev
, 0x210000, 0x80);
8645 /* Reset External Baseband Reg */
8646 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x703);
8648 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x707);
8651 /* HW Config (Reg 5) */
8652 write_nic_byte(dev
, 0x210014, 0x72); // fifo width =16
8654 write_nic_byte(dev
, 0x210014, 0x72); // fifo width =16
8657 /* Enable System (Reg 0)
8658 * second enable should be OK */
8659 write_nic_byte(dev
, 0x210000, 0x00); // clear enable system
8661 write_nic_byte(dev
, 0x210000, 0x80); // set enable system
8663 /* check Symbol is enabled - upped this from 5 as it wasn't always
8664 * catching the update */
8665 for (i
= 0; i
< 10; i
++) {
8668 /* check Dino is enabled bit */
8669 read_nic_byte(dev
, 0x210000, &data
);
8675 printk(KERN_ERR DRV_NAME
": %s: Error initializing Symbol\n",
8680 /* Get Symbol alive response */
8681 for (i
= 0; i
< 30; i
++) {
8682 /* Read alive response structure */
8684 j
< (sizeof(struct symbol_alive_response
) >> 1); j
++)
8685 read_nic_word(dev
, 0x210004, ((u16
*) & response
) + j
);
8687 if ((response
.cmd_id
== 1) && (response
.ucode_valid
== 0x1))
8693 printk(KERN_ERR DRV_NAME
8694 ": %s: No response from Symbol - hw not alive\n",
8696 printk_buf(IPW_DL_ERROR
, (u8
*) & response
, sizeof(response
));