1 /******************************************************************************
3 Copyright(c) 2003 - 2006 Intel Corporation. All rights reserved.
5 This program is free software; you can redistribute it and/or modify it
6 under the terms of version 2 of the GNU General Public License as
7 published by the Free Software Foundation.
9 This program is distributed in the hope that it will be useful, but WITHOUT
10 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 You should have received a copy of the GNU General Public License along with
15 this program; if not, write to the Free Software Foundation, Inc., 59
16 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
18 The full GNU General Public License is included in this distribution in the
22 Intel Linux Wireless <ilw@linux.intel.com>
23 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 Portions of this file are based on the sample_* files provided by Wireless
26 Extensions 0.26 package and copyright (c) 1997-2003 Jean Tourrilhes
29 Portions of this file are based on the Host AP project,
30 Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
32 Copyright (c) 2002-2003, Jouni Malinen <j@w1.fi>
34 Portions of ipw2100_mod_firmware_load, ipw2100_do_mod_firmware_load, and
35 ipw2100_fw_load are loosely based on drivers/sound/sound_firmware.c
36 available in the 2.4.25 kernel sources, and are copyright (c) Alan Cox
38 ******************************************************************************/
41 Initial driver on which this is based was developed by Janusz Gorycki,
42 Maciej Urbaniak, and Maciej Sosnowski.
44 Promiscuous mode support added by Jacek Wysoczynski and Maciej Urbaniak.
48 Tx - Commands and Data
50 Firmware and host share a circular queue of Transmit Buffer Descriptors (TBDs)
51 Each TBD contains a pointer to the physical (dma_addr_t) address of data being
52 sent to the firmware as well as the length of the data.
54 The host writes to the TBD queue at the WRITE index. The WRITE index points
55 to the _next_ packet to be written and is advanced when after the TBD has been
58 The firmware pulls from the TBD queue at the READ index. The READ index points
59 to the currently being read entry, and is advanced once the firmware is
62 When data is sent to the firmware, the first TBD is used to indicate to the
63 firmware if a Command or Data is being sent. If it is Command, all of the
64 command information is contained within the physical address referred to by the
65 TBD. If it is Data, the first TBD indicates the type of data packet, number
66 of fragments, etc. The next TBD then refers to the actual packet location.
68 The Tx flow cycle is as follows:
70 1) ipw2100_tx() is called by kernel with SKB to transmit
71 2) Packet is move from the tx_free_list and appended to the transmit pending
73 3) work is scheduled to move pending packets into the shared circular queue.
74 4) when placing packet in the circular queue, the incoming SKB is DMA mapped
75 to a physical address. That address is entered into a TBD. Two TBDs are
76 filled out. The first indicating a data packet, the second referring to the
78 5) the packet is removed from tx_pend_list and placed on the end of the
79 firmware pending list (fw_pend_list)
80 6) firmware is notified that the WRITE index has
81 7) Once the firmware has processed the TBD, INTA is triggered.
82 8) For each Tx interrupt received from the firmware, the READ index is checked
83 to see which TBDs are done being processed.
84 9) For each TBD that has been processed, the ISR pulls the oldest packet
85 from the fw_pend_list.
86 10)The packet structure contained in the fw_pend_list is then used
87 to unmap the DMA address and to free the SKB originally passed to the driver
89 11)The packet structure is placed onto the tx_free_list
91 The above steps are the same for commands, only the msg_free_list/msg_pend_list
92 are used instead of tx_free_list/tx_pend_list
96 Critical Sections / Locking :
98 There are two locks utilized. The first is the low level lock (priv->low_lock)
99 that protects the following:
101 - Access to the Tx/Rx queue lists via priv->low_lock. The lists are as follows:
103 tx_free_list : Holds pre-allocated Tx buffers.
104 TAIL modified in __ipw2100_tx_process()
105 HEAD modified in ipw2100_tx()
107 tx_pend_list : Holds used Tx buffers waiting to go into the TBD ring
108 TAIL modified ipw2100_tx()
109 HEAD modified by ipw2100_tx_send_data()
111 msg_free_list : Holds pre-allocated Msg (Command) buffers
112 TAIL modified in __ipw2100_tx_process()
113 HEAD modified in ipw2100_hw_send_command()
115 msg_pend_list : Holds used Msg buffers waiting to go into the TBD ring
116 TAIL modified in ipw2100_hw_send_command()
117 HEAD modified in ipw2100_tx_send_commands()
119 The flow of data on the TX side is as follows:
121 MSG_FREE_LIST + COMMAND => MSG_PEND_LIST => TBD => MSG_FREE_LIST
122 TX_FREE_LIST + DATA => TX_PEND_LIST => TBD => TX_FREE_LIST
124 The methods that work on the TBD ring are protected via priv->low_lock.
126 - The internal data state of the device itself
127 - Access to the firmware read/write indexes for the BD queues
130 All external entry functions are locked with the priv->action_lock to ensure
131 that only one external action is invoked at a time.
136 #include <linux/compiler.h>
137 #include <linux/errno.h>
138 #include <linux/if_arp.h>
139 #include <linux/in6.h>
140 #include <linux/in.h>
141 #include <linux/ip.h>
142 #include <linux/kernel.h>
143 #include <linux/kmod.h>
144 #include <linux/module.h>
145 #include <linux/netdevice.h>
146 #include <linux/ethtool.h>
147 #include <linux/pci.h>
148 #include <linux/dma-mapping.h>
149 #include <linux/proc_fs.h>
150 #include <linux/skbuff.h>
151 #include <asm/uaccess.h>
153 #include <linux/fs.h>
154 #include <linux/mm.h>
155 #include <linux/slab.h>
156 #include <linux/unistd.h>
157 #include <linux/stringify.h>
158 #include <linux/tcp.h>
159 #include <linux/types.h>
160 #include <linux/time.h>
161 #include <linux/firmware.h>
162 #include <linux/acpi.h>
163 #include <linux/ctype.h>
164 #include <linux/pm_qos.h>
166 #include <net/lib80211.h>
171 #define IPW2100_VERSION "git-1.2.2"
173 #define DRV_NAME "ipw2100"
174 #define DRV_VERSION IPW2100_VERSION
175 #define DRV_DESCRIPTION "Intel(R) PRO/Wireless 2100 Network Driver"
176 #define DRV_COPYRIGHT "Copyright(c) 2003-2006 Intel Corporation"
178 static struct pm_qos_request ipw2100_pm_qos_req
;
180 /* Debugging stuff */
181 #ifdef CONFIG_IPW2100_DEBUG
182 #define IPW2100_RX_DEBUG /* Reception debugging */
185 MODULE_DESCRIPTION(DRV_DESCRIPTION
);
186 MODULE_VERSION(DRV_VERSION
);
187 MODULE_AUTHOR(DRV_COPYRIGHT
);
188 MODULE_LICENSE("GPL");
190 static int debug
= 0;
191 static int network_mode
= 0;
192 static int channel
= 0;
193 static int associate
= 0;
194 static int disable
= 0;
196 static struct ipw2100_fw ipw2100_firmware
;
199 #include <linux/moduleparam.h>
200 module_param(debug
, int, 0444);
201 module_param_named(mode
, network_mode
, int, 0444);
202 module_param(channel
, int, 0444);
203 module_param(associate
, int, 0444);
204 module_param(disable
, int, 0444);
206 MODULE_PARM_DESC(debug
, "debug level");
207 MODULE_PARM_DESC(mode
, "network mode (0=BSS,1=IBSS,2=Monitor)");
208 MODULE_PARM_DESC(channel
, "channel");
209 MODULE_PARM_DESC(associate
, "auto associate when scanning (default off)");
210 MODULE_PARM_DESC(disable
, "manually disable the radio (default 0 [radio on])");
212 static u32 ipw2100_debug_level
= IPW_DL_NONE
;
214 #ifdef CONFIG_IPW2100_DEBUG
215 #define IPW_DEBUG(level, message...) \
217 if (ipw2100_debug_level & (level)) { \
218 printk(KERN_DEBUG "ipw2100: %c %s ", \
219 in_interrupt() ? 'I' : 'U', __func__); \
224 #define IPW_DEBUG(level, message...) do {} while (0)
225 #endif /* CONFIG_IPW2100_DEBUG */
227 #ifdef CONFIG_IPW2100_DEBUG
228 static const char *command_types
[] = {
230 "unused", /* HOST_ATTENTION */
232 "unused", /* SLEEP */
233 "unused", /* HOST_POWER_DOWN */
236 "unused", /* SET_IMR */
239 "AUTHENTICATION_TYPE",
242 "INTERNATIONAL_MODE",
257 "CLEAR_ALL_MULTICAST",
278 "AP_OR_STATION_TABLE",
282 "unused", /* SAVE_CALIBRATION */
283 "unused", /* RESTORE_CALIBRATION */
287 "HOST_PRE_POWER_DOWN",
288 "unused", /* HOST_INTERRUPT_COALESCING */
290 "CARD_DISABLE_PHY_OFF",
293 "SET_STATION_STAT_BITS",
294 "CLEAR_STATIONS_STAT_BITS",
296 "SET_SECURITY_INFORMATION",
297 "DISASSOCIATION_BSSID",
302 static const long ipw2100_frequencies
[] = {
303 2412, 2417, 2422, 2427,
304 2432, 2437, 2442, 2447,
305 2452, 2457, 2462, 2467,
309 #define FREQ_COUNT ARRAY_SIZE(ipw2100_frequencies)
311 static struct ieee80211_rate ipw2100_bg_rates
[] = {
313 { .bitrate
= 20, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
314 { .bitrate
= 55, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
315 { .bitrate
= 110, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
318 #define RATE_COUNT ARRAY_SIZE(ipw2100_bg_rates)
320 /* Pre-decl until we get the code solid and then we can clean it up */
321 static void ipw2100_tx_send_commands(struct ipw2100_priv
*priv
);
322 static void ipw2100_tx_send_data(struct ipw2100_priv
*priv
);
323 static int ipw2100_adapter_setup(struct ipw2100_priv
*priv
);
325 static void ipw2100_queues_initialize(struct ipw2100_priv
*priv
);
326 static void ipw2100_queues_free(struct ipw2100_priv
*priv
);
327 static int ipw2100_queues_allocate(struct ipw2100_priv
*priv
);
329 static int ipw2100_fw_download(struct ipw2100_priv
*priv
,
330 struct ipw2100_fw
*fw
);
331 static int ipw2100_get_firmware(struct ipw2100_priv
*priv
,
332 struct ipw2100_fw
*fw
);
333 static int ipw2100_get_fwversion(struct ipw2100_priv
*priv
, char *buf
,
335 static int ipw2100_get_ucodeversion(struct ipw2100_priv
*priv
, char *buf
,
337 static void ipw2100_release_firmware(struct ipw2100_priv
*priv
,
338 struct ipw2100_fw
*fw
);
339 static int ipw2100_ucode_download(struct ipw2100_priv
*priv
,
340 struct ipw2100_fw
*fw
);
341 static void ipw2100_wx_event_work(struct work_struct
*work
);
342 static struct iw_statistics
*ipw2100_wx_wireless_stats(struct net_device
*dev
);
343 static struct iw_handler_def ipw2100_wx_handler_def
;
345 static inline void read_register(struct net_device
*dev
, u32 reg
, u32
* val
)
347 struct ipw2100_priv
*priv
= libipw_priv(dev
);
349 *val
= ioread32(priv
->ioaddr
+ reg
);
350 IPW_DEBUG_IO("r: 0x%08X => 0x%08X\n", reg
, *val
);
353 static inline void write_register(struct net_device
*dev
, u32 reg
, u32 val
)
355 struct ipw2100_priv
*priv
= libipw_priv(dev
);
357 iowrite32(val
, priv
->ioaddr
+ reg
);
358 IPW_DEBUG_IO("w: 0x%08X <= 0x%08X\n", reg
, val
);
361 static inline void read_register_word(struct net_device
*dev
, u32 reg
,
364 struct ipw2100_priv
*priv
= libipw_priv(dev
);
366 *val
= ioread16(priv
->ioaddr
+ reg
);
367 IPW_DEBUG_IO("r: 0x%08X => %04X\n", reg
, *val
);
370 static inline void read_register_byte(struct net_device
*dev
, u32 reg
, u8
* val
)
372 struct ipw2100_priv
*priv
= libipw_priv(dev
);
374 *val
= ioread8(priv
->ioaddr
+ reg
);
375 IPW_DEBUG_IO("r: 0x%08X => %02X\n", reg
, *val
);
378 static inline void write_register_word(struct net_device
*dev
, u32 reg
, u16 val
)
380 struct ipw2100_priv
*priv
= libipw_priv(dev
);
382 iowrite16(val
, priv
->ioaddr
+ reg
);
383 IPW_DEBUG_IO("w: 0x%08X <= %04X\n", reg
, val
);
386 static inline void write_register_byte(struct net_device
*dev
, u32 reg
, u8 val
)
388 struct ipw2100_priv
*priv
= libipw_priv(dev
);
390 iowrite8(val
, priv
->ioaddr
+ reg
);
391 IPW_DEBUG_IO("w: 0x%08X =< %02X\n", reg
, val
);
394 static inline void read_nic_dword(struct net_device
*dev
, u32 addr
, u32
* val
)
396 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
397 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
398 read_register(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
401 static inline void write_nic_dword(struct net_device
*dev
, u32 addr
, u32 val
)
403 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
404 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
405 write_register(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
408 static inline void read_nic_word(struct net_device
*dev
, u32 addr
, u16
* val
)
410 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
411 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
412 read_register_word(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
415 static inline void write_nic_word(struct net_device
*dev
, u32 addr
, u16 val
)
417 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
418 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
419 write_register_word(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
422 static inline void read_nic_byte(struct net_device
*dev
, u32 addr
, u8
* val
)
424 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
425 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
426 read_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
429 static inline void write_nic_byte(struct net_device
*dev
, u32 addr
, u8 val
)
431 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
432 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
433 write_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
436 static inline void write_nic_auto_inc_address(struct net_device
*dev
, u32 addr
)
438 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
,
439 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
442 static inline void write_nic_dword_auto_inc(struct net_device
*dev
, u32 val
)
444 write_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, val
);
447 static void write_nic_memory(struct net_device
*dev
, u32 addr
, u32 len
,
455 /* read first nibble byte by byte */
456 aligned_addr
= addr
& (~0x3);
457 dif_len
= addr
- aligned_addr
;
459 /* Start reading at aligned_addr + dif_len */
460 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
462 for (i
= dif_len
; i
< 4; i
++, buf
++)
463 write_register_byte(dev
,
464 IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
471 /* read DWs through autoincrement registers */
472 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
, aligned_addr
);
473 aligned_len
= len
& (~0x3);
474 for (i
= 0; i
< aligned_len
; i
+= 4, buf
+= 4, aligned_addr
+= 4)
475 write_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, *(u32
*) buf
);
477 /* copy the last nibble */
478 dif_len
= len
- aligned_len
;
479 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
, aligned_addr
);
480 for (i
= 0; i
< dif_len
; i
++, buf
++)
481 write_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
485 static void read_nic_memory(struct net_device
*dev
, u32 addr
, u32 len
,
493 /* read first nibble byte by byte */
494 aligned_addr
= addr
& (~0x3);
495 dif_len
= addr
- aligned_addr
;
497 /* Start reading at aligned_addr + dif_len */
498 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
500 for (i
= dif_len
; i
< 4; i
++, buf
++)
501 read_register_byte(dev
,
502 IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
509 /* read DWs through autoincrement registers */
510 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
, aligned_addr
);
511 aligned_len
= len
& (~0x3);
512 for (i
= 0; i
< aligned_len
; i
+= 4, buf
+= 4, aligned_addr
+= 4)
513 read_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, (u32
*) buf
);
515 /* copy the last nibble */
516 dif_len
= len
- aligned_len
;
517 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
, aligned_addr
);
518 for (i
= 0; i
< dif_len
; i
++, buf
++)
519 read_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
+ i
, buf
);
522 static bool ipw2100_hw_is_adapter_in_system(struct net_device
*dev
)
526 read_register(dev
, IPW_REG_DOA_DEBUG_AREA_START
, &dbg
);
528 return dbg
== IPW_DATA_DOA_DEBUG_VALUE
;
531 static int ipw2100_get_ordinal(struct ipw2100_priv
*priv
, u32 ord
,
532 void *val
, u32
* len
)
534 struct ipw2100_ordinals
*ordinals
= &priv
->ordinals
;
541 if (ordinals
->table1_addr
== 0) {
542 printk(KERN_WARNING DRV_NAME
": attempt to use fw ordinals "
543 "before they have been loaded.\n");
547 if (IS_ORDINAL_TABLE_ONE(ordinals
, ord
)) {
548 if (*len
< IPW_ORD_TAB_1_ENTRY_SIZE
) {
549 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
551 printk(KERN_WARNING DRV_NAME
552 ": ordinal buffer length too small, need %zd\n",
553 IPW_ORD_TAB_1_ENTRY_SIZE
);
558 read_nic_dword(priv
->net_dev
,
559 ordinals
->table1_addr
+ (ord
<< 2), &addr
);
560 read_nic_dword(priv
->net_dev
, addr
, val
);
562 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
567 if (IS_ORDINAL_TABLE_TWO(ordinals
, ord
)) {
569 ord
-= IPW_START_ORD_TAB_2
;
571 /* get the address of statistic */
572 read_nic_dword(priv
->net_dev
,
573 ordinals
->table2_addr
+ (ord
<< 3), &addr
);
575 /* get the second DW of statistics ;
576 * two 16-bit words - first is length, second is count */
577 read_nic_dword(priv
->net_dev
,
578 ordinals
->table2_addr
+ (ord
<< 3) + sizeof(u32
),
581 /* get each entry length */
582 field_len
= *((u16
*) & field_info
);
584 /* get number of entries */
585 field_count
= *(((u16
*) & field_info
) + 1);
587 /* abort if no enough memory */
588 total_length
= field_len
* field_count
;
589 if (total_length
> *len
) {
598 /* read the ordinal data from the SRAM */
599 read_nic_memory(priv
->net_dev
, addr
, total_length
, val
);
604 printk(KERN_WARNING DRV_NAME
": ordinal %d neither in table 1 nor "
605 "in table 2\n", ord
);
610 static int ipw2100_set_ordinal(struct ipw2100_priv
*priv
, u32 ord
, u32
* val
,
613 struct ipw2100_ordinals
*ordinals
= &priv
->ordinals
;
616 if (IS_ORDINAL_TABLE_ONE(ordinals
, ord
)) {
617 if (*len
!= IPW_ORD_TAB_1_ENTRY_SIZE
) {
618 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
619 IPW_DEBUG_INFO("wrong size\n");
623 read_nic_dword(priv
->net_dev
,
624 ordinals
->table1_addr
+ (ord
<< 2), &addr
);
626 write_nic_dword(priv
->net_dev
, addr
, *val
);
628 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
633 IPW_DEBUG_INFO("wrong table\n");
634 if (IS_ORDINAL_TABLE_TWO(ordinals
, ord
))
640 static char *snprint_line(char *buf
, size_t count
,
641 const u8
* data
, u32 len
, u32 ofs
)
646 out
= snprintf(buf
, count
, "%08X", ofs
);
648 for (l
= 0, i
= 0; i
< 2; i
++) {
649 out
+= snprintf(buf
+ out
, count
- out
, " ");
650 for (j
= 0; j
< 8 && l
< len
; j
++, l
++)
651 out
+= snprintf(buf
+ out
, count
- out
, "%02X ",
654 out
+= snprintf(buf
+ out
, count
- out
, " ");
657 out
+= snprintf(buf
+ out
, count
- out
, " ");
658 for (l
= 0, i
= 0; i
< 2; i
++) {
659 out
+= snprintf(buf
+ out
, count
- out
, " ");
660 for (j
= 0; j
< 8 && l
< len
; j
++, l
++) {
661 c
= data
[(i
* 8 + j
)];
662 if (!isascii(c
) || !isprint(c
))
665 out
+= snprintf(buf
+ out
, count
- out
, "%c", c
);
669 out
+= snprintf(buf
+ out
, count
- out
, " ");
675 static void printk_buf(int level
, const u8
* data
, u32 len
)
679 if (!(ipw2100_debug_level
& level
))
683 printk(KERN_DEBUG
"%s\n",
684 snprint_line(line
, sizeof(line
), &data
[ofs
],
685 min(len
, 16U), ofs
));
687 len
-= min(len
, 16U);
691 #define MAX_RESET_BACKOFF 10
693 static void schedule_reset(struct ipw2100_priv
*priv
)
695 unsigned long now
= get_seconds();
697 /* If we haven't received a reset request within the backoff period,
698 * then we can reset the backoff interval so this reset occurs
700 if (priv
->reset_backoff
&&
701 (now
- priv
->last_reset
> priv
->reset_backoff
))
702 priv
->reset_backoff
= 0;
704 priv
->last_reset
= get_seconds();
706 if (!(priv
->status
& STATUS_RESET_PENDING
)) {
707 IPW_DEBUG_INFO("%s: Scheduling firmware restart (%ds).\n",
708 priv
->net_dev
->name
, priv
->reset_backoff
);
709 netif_carrier_off(priv
->net_dev
);
710 netif_stop_queue(priv
->net_dev
);
711 priv
->status
|= STATUS_RESET_PENDING
;
712 if (priv
->reset_backoff
)
713 schedule_delayed_work(&priv
->reset_work
,
714 priv
->reset_backoff
* HZ
);
716 schedule_delayed_work(&priv
->reset_work
, 0);
718 if (priv
->reset_backoff
< MAX_RESET_BACKOFF
)
719 priv
->reset_backoff
++;
721 wake_up_interruptible(&priv
->wait_command_queue
);
723 IPW_DEBUG_INFO("%s: Firmware restart already in progress.\n",
724 priv
->net_dev
->name
);
728 #define HOST_COMPLETE_TIMEOUT (2 * HZ)
729 static int ipw2100_hw_send_command(struct ipw2100_priv
*priv
,
730 struct host_command
*cmd
)
732 struct list_head
*element
;
733 struct ipw2100_tx_packet
*packet
;
737 IPW_DEBUG_HC("Sending %s command (#%d), %d bytes\n",
738 command_types
[cmd
->host_command
], cmd
->host_command
,
739 cmd
->host_command_length
);
740 printk_buf(IPW_DL_HC
, (u8
*) cmd
->host_command_parameters
,
741 cmd
->host_command_length
);
743 spin_lock_irqsave(&priv
->low_lock
, flags
);
745 if (priv
->fatal_error
) {
747 ("Attempt to send command while hardware in fatal error condition.\n");
752 if (!(priv
->status
& STATUS_RUNNING
)) {
754 ("Attempt to send command while hardware is not running.\n");
759 if (priv
->status
& STATUS_CMD_ACTIVE
) {
761 ("Attempt to send command while another command is pending.\n");
766 if (list_empty(&priv
->msg_free_list
)) {
767 IPW_DEBUG_INFO("no available msg buffers\n");
771 priv
->status
|= STATUS_CMD_ACTIVE
;
772 priv
->messages_sent
++;
774 element
= priv
->msg_free_list
.next
;
776 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
777 packet
->jiffy_start
= jiffies
;
779 /* initialize the firmware command packet */
780 packet
->info
.c_struct
.cmd
->host_command_reg
= cmd
->host_command
;
781 packet
->info
.c_struct
.cmd
->host_command_reg1
= cmd
->host_command1
;
782 packet
->info
.c_struct
.cmd
->host_command_len_reg
=
783 cmd
->host_command_length
;
784 packet
->info
.c_struct
.cmd
->sequence
= cmd
->host_command_sequence
;
786 memcpy(packet
->info
.c_struct
.cmd
->host_command_params_reg
,
787 cmd
->host_command_parameters
,
788 sizeof(packet
->info
.c_struct
.cmd
->host_command_params_reg
));
791 DEC_STAT(&priv
->msg_free_stat
);
793 list_add_tail(element
, &priv
->msg_pend_list
);
794 INC_STAT(&priv
->msg_pend_stat
);
796 ipw2100_tx_send_commands(priv
);
797 ipw2100_tx_send_data(priv
);
799 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
802 * We must wait for this command to complete before another
803 * command can be sent... but if we wait more than 3 seconds
804 * then there is a problem.
808 wait_event_interruptible_timeout(priv
->wait_command_queue
,
810 status
& STATUS_CMD_ACTIVE
),
811 HOST_COMPLETE_TIMEOUT
);
814 IPW_DEBUG_INFO("Command completion failed out after %dms.\n",
815 1000 * (HOST_COMPLETE_TIMEOUT
/ HZ
));
816 priv
->fatal_error
= IPW2100_ERR_MSG_TIMEOUT
;
817 priv
->status
&= ~STATUS_CMD_ACTIVE
;
818 schedule_reset(priv
);
822 if (priv
->fatal_error
) {
823 printk(KERN_WARNING DRV_NAME
": %s: firmware fatal error\n",
824 priv
->net_dev
->name
);
828 /* !!!!! HACK TEST !!!!!
829 * When lots of debug trace statements are enabled, the driver
830 * doesn't seem to have as many firmware restart cycles...
832 * As a test, we're sticking in a 1/100s delay here */
833 schedule_timeout_uninterruptible(msecs_to_jiffies(10));
838 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
844 * Verify the values and data access of the hardware
845 * No locks needed or used. No functions called.
847 static int ipw2100_verify(struct ipw2100_priv
*priv
)
852 u32 val1
= 0x76543210;
853 u32 val2
= 0xFEDCBA98;
855 /* Domain 0 check - all values should be DOA_DEBUG */
856 for (address
= IPW_REG_DOA_DEBUG_AREA_START
;
857 address
< IPW_REG_DOA_DEBUG_AREA_END
; address
+= sizeof(u32
)) {
858 read_register(priv
->net_dev
, address
, &data1
);
859 if (data1
!= IPW_DATA_DOA_DEBUG_VALUE
)
863 /* Domain 1 check - use arbitrary read/write compare */
864 for (address
= 0; address
< 5; address
++) {
865 /* The memory area is not used now */
866 write_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x32,
868 write_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x36,
870 read_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x32,
872 read_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x36,
874 if (val1
== data1
&& val2
== data2
)
883 * Loop until the CARD_DISABLED bit is the same value as the
886 * TODO: See if it would be more efficient to do a wait/wake
887 * cycle and have the completion event trigger the wakeup
890 #define IPW_CARD_DISABLE_COMPLETE_WAIT 100 // 100 milli
891 static int ipw2100_wait_for_card_state(struct ipw2100_priv
*priv
, int state
)
895 u32 len
= sizeof(card_state
);
898 for (i
= 0; i
<= IPW_CARD_DISABLE_COMPLETE_WAIT
* 1000; i
+= 50) {
899 err
= ipw2100_get_ordinal(priv
, IPW_ORD_CARD_DISABLED
,
902 IPW_DEBUG_INFO("Query of CARD_DISABLED ordinal "
907 /* We'll break out if either the HW state says it is
908 * in the state we want, or if HOST_COMPLETE command
910 if ((card_state
== state
) ||
911 ((priv
->status
& STATUS_ENABLED
) ?
912 IPW_HW_STATE_ENABLED
: IPW_HW_STATE_DISABLED
) == state
) {
913 if (state
== IPW_HW_STATE_ENABLED
)
914 priv
->status
|= STATUS_ENABLED
;
916 priv
->status
&= ~STATUS_ENABLED
;
924 IPW_DEBUG_INFO("ipw2100_wait_for_card_state to %s state timed out\n",
925 state
? "DISABLED" : "ENABLED");
929 /*********************************************************************
930 Procedure : sw_reset_and_clock
931 Purpose : Asserts s/w reset, asserts clock initialization
932 and waits for clock stabilization
933 ********************************************************************/
934 static int sw_reset_and_clock(struct ipw2100_priv
*priv
)
940 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
941 IPW_AUX_HOST_RESET_REG_SW_RESET
);
943 // wait for clock stabilization
944 for (i
= 0; i
< 1000; i
++) {
945 udelay(IPW_WAIT_RESET_ARC_COMPLETE_DELAY
);
947 // check clock ready bit
948 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, &r
);
949 if (r
& IPW_AUX_HOST_RESET_REG_PRINCETON_RESET
)
954 return -EIO
; // TODO: better error value
956 /* set "initialization complete" bit to move adapter to
958 write_register(priv
->net_dev
, IPW_REG_GP_CNTRL
,
959 IPW_AUX_HOST_GP_CNTRL_BIT_INIT_DONE
);
961 /* wait for clock stabilization */
962 for (i
= 0; i
< 10000; i
++) {
963 udelay(IPW_WAIT_CLOCK_STABILIZATION_DELAY
* 4);
965 /* check clock ready bit */
966 read_register(priv
->net_dev
, IPW_REG_GP_CNTRL
, &r
);
967 if (r
& IPW_AUX_HOST_GP_CNTRL_BIT_CLOCK_READY
)
972 return -EIO
; /* TODO: better error value */
974 /* set D0 standby bit */
975 read_register(priv
->net_dev
, IPW_REG_GP_CNTRL
, &r
);
976 write_register(priv
->net_dev
, IPW_REG_GP_CNTRL
,
977 r
| IPW_AUX_HOST_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY
);
982 /*********************************************************************
983 Procedure : ipw2100_download_firmware
984 Purpose : Initiaze adapter after power on.
986 1. assert s/w reset first!
987 2. awake clocks & wait for clock stabilization
988 3. hold ARC (don't ask me why...)
989 4. load Dino ucode and reset/clock init again
990 5. zero-out shared mem
992 *******************************************************************/
993 static int ipw2100_download_firmware(struct ipw2100_priv
*priv
)
999 /* Fetch the firmware and microcode */
1000 struct ipw2100_fw ipw2100_firmware
;
1003 if (priv
->fatal_error
) {
1004 IPW_DEBUG_ERROR("%s: ipw2100_download_firmware called after "
1005 "fatal error %d. Interface must be brought down.\n",
1006 priv
->net_dev
->name
, priv
->fatal_error
);
1010 if (!ipw2100_firmware
.version
) {
1011 err
= ipw2100_get_firmware(priv
, &ipw2100_firmware
);
1013 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
1014 priv
->net_dev
->name
, err
);
1015 priv
->fatal_error
= IPW2100_ERR_FW_LOAD
;
1020 err
= ipw2100_get_firmware(priv
, &ipw2100_firmware
);
1022 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
1023 priv
->net_dev
->name
, err
);
1024 priv
->fatal_error
= IPW2100_ERR_FW_LOAD
;
1028 priv
->firmware_version
= ipw2100_firmware
.version
;
1030 /* s/w reset and clock stabilization */
1031 err
= sw_reset_and_clock(priv
);
1033 IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n",
1034 priv
->net_dev
->name
, err
);
1038 err
= ipw2100_verify(priv
);
1040 IPW_DEBUG_ERROR("%s: ipw2100_verify failed: %d\n",
1041 priv
->net_dev
->name
, err
);
1046 write_nic_dword(priv
->net_dev
,
1047 IPW_INTERNAL_REGISTER_HALT_AND_RESET
, 0x80000000);
1049 /* allow ARC to run */
1050 write_register(priv
->net_dev
, IPW_REG_RESET_REG
, 0);
1052 /* load microcode */
1053 err
= ipw2100_ucode_download(priv
, &ipw2100_firmware
);
1055 printk(KERN_ERR DRV_NAME
": %s: Error loading microcode: %d\n",
1056 priv
->net_dev
->name
, err
);
1061 write_nic_dword(priv
->net_dev
,
1062 IPW_INTERNAL_REGISTER_HALT_AND_RESET
, 0x00000000);
1064 /* s/w reset and clock stabilization (again!!!) */
1065 err
= sw_reset_and_clock(priv
);
1067 printk(KERN_ERR DRV_NAME
1068 ": %s: sw_reset_and_clock failed: %d\n",
1069 priv
->net_dev
->name
, err
);
1074 err
= ipw2100_fw_download(priv
, &ipw2100_firmware
);
1076 IPW_DEBUG_ERROR("%s: Error loading firmware: %d\n",
1077 priv
->net_dev
->name
, err
);
1082 * When the .resume method of the driver is called, the other
1083 * part of the system, i.e. the ide driver could still stay in
1084 * the suspend stage. This prevents us from loading the firmware
1085 * from the disk. --YZ
1088 /* free any storage allocated for firmware image */
1089 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
1092 /* zero out Domain 1 area indirectly (Si requirement) */
1093 for (address
= IPW_HOST_FW_SHARED_AREA0
;
1094 address
< IPW_HOST_FW_SHARED_AREA0_END
; address
+= 4)
1095 write_nic_dword(priv
->net_dev
, address
, 0);
1096 for (address
= IPW_HOST_FW_SHARED_AREA1
;
1097 address
< IPW_HOST_FW_SHARED_AREA1_END
; address
+= 4)
1098 write_nic_dword(priv
->net_dev
, address
, 0);
1099 for (address
= IPW_HOST_FW_SHARED_AREA2
;
1100 address
< IPW_HOST_FW_SHARED_AREA2_END
; address
+= 4)
1101 write_nic_dword(priv
->net_dev
, address
, 0);
1102 for (address
= IPW_HOST_FW_SHARED_AREA3
;
1103 address
< IPW_HOST_FW_SHARED_AREA3_END
; address
+= 4)
1104 write_nic_dword(priv
->net_dev
, address
, 0);
1105 for (address
= IPW_HOST_FW_INTERRUPT_AREA
;
1106 address
< IPW_HOST_FW_INTERRUPT_AREA_END
; address
+= 4)
1107 write_nic_dword(priv
->net_dev
, address
, 0);
1112 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
1116 static inline void ipw2100_enable_interrupts(struct ipw2100_priv
*priv
)
1118 if (priv
->status
& STATUS_INT_ENABLED
)
1120 priv
->status
|= STATUS_INT_ENABLED
;
1121 write_register(priv
->net_dev
, IPW_REG_INTA_MASK
, IPW_INTERRUPT_MASK
);
1124 static inline void ipw2100_disable_interrupts(struct ipw2100_priv
*priv
)
1126 if (!(priv
->status
& STATUS_INT_ENABLED
))
1128 priv
->status
&= ~STATUS_INT_ENABLED
;
1129 write_register(priv
->net_dev
, IPW_REG_INTA_MASK
, 0x0);
1132 static void ipw2100_initialize_ordinals(struct ipw2100_priv
*priv
)
1134 struct ipw2100_ordinals
*ord
= &priv
->ordinals
;
1136 IPW_DEBUG_INFO("enter\n");
1138 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_1
,
1141 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_2
,
1144 read_nic_dword(priv
->net_dev
, ord
->table1_addr
, &ord
->table1_size
);
1145 read_nic_dword(priv
->net_dev
, ord
->table2_addr
, &ord
->table2_size
);
1147 ord
->table2_size
&= 0x0000FFFF;
1149 IPW_DEBUG_INFO("table 1 size: %d\n", ord
->table1_size
);
1150 IPW_DEBUG_INFO("table 2 size: %d\n", ord
->table2_size
);
1151 IPW_DEBUG_INFO("exit\n");
1154 static inline void ipw2100_hw_set_gpio(struct ipw2100_priv
*priv
)
1158 * Set GPIO 3 writable by FW; GPIO 1 writable
1159 * by driver and enable clock
1161 reg
= (IPW_BIT_GPIO_GPIO3_MASK
| IPW_BIT_GPIO_GPIO1_ENABLE
|
1162 IPW_BIT_GPIO_LED_OFF
);
1163 write_register(priv
->net_dev
, IPW_REG_GPIO
, reg
);
1166 static int rf_kill_active(struct ipw2100_priv
*priv
)
1168 #define MAX_RF_KILL_CHECKS 5
1169 #define RF_KILL_CHECK_DELAY 40
1171 unsigned short value
= 0;
1175 if (!(priv
->hw_features
& HW_FEATURE_RFKILL
)) {
1176 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, false);
1177 priv
->status
&= ~STATUS_RF_KILL_HW
;
1181 for (i
= 0; i
< MAX_RF_KILL_CHECKS
; i
++) {
1182 udelay(RF_KILL_CHECK_DELAY
);
1183 read_register(priv
->net_dev
, IPW_REG_GPIO
, ®
);
1184 value
= (value
<< 1) | ((reg
& IPW_BIT_GPIO_RF_KILL
) ? 0 : 1);
1188 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, true);
1189 priv
->status
|= STATUS_RF_KILL_HW
;
1191 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, false);
1192 priv
->status
&= ~STATUS_RF_KILL_HW
;
1195 return (value
== 0);
1198 static int ipw2100_get_hw_features(struct ipw2100_priv
*priv
)
1204 * EEPROM_SRAM_DB_START_ADDRESS using ordinal in ordinal table 1
1207 if (ipw2100_get_ordinal
1208 (priv
, IPW_ORD_EEPROM_SRAM_DB_BLOCK_START_ADDRESS
, &addr
, &len
)) {
1209 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1214 IPW_DEBUG_INFO("EEPROM address: %08X\n", addr
);
1217 * EEPROM version is the byte at offset 0xfd in firmware
1218 * We read 4 bytes, then shift out the byte we actually want */
1219 read_nic_dword(priv
->net_dev
, addr
+ 0xFC, &val
);
1220 priv
->eeprom_version
= (val
>> 24) & 0xFF;
1221 IPW_DEBUG_INFO("EEPROM version: %d\n", priv
->eeprom_version
);
1224 * HW RF Kill enable is bit 0 in byte at offset 0x21 in firmware
1226 * notice that the EEPROM bit is reverse polarity, i.e.
1227 * bit = 0 signifies HW RF kill switch is supported
1228 * bit = 1 signifies HW RF kill switch is NOT supported
1230 read_nic_dword(priv
->net_dev
, addr
+ 0x20, &val
);
1231 if (!((val
>> 24) & 0x01))
1232 priv
->hw_features
|= HW_FEATURE_RFKILL
;
1234 IPW_DEBUG_INFO("HW RF Kill: %ssupported.\n",
1235 (priv
->hw_features
& HW_FEATURE_RFKILL
) ? "" : "not ");
1241 * Start firmware execution after power on and intialization
1244 * 2. Wait for f/w initialization completes;
1246 static int ipw2100_start_adapter(struct ipw2100_priv
*priv
)
1249 u32 inta
, inta_mask
, gpio
;
1251 IPW_DEBUG_INFO("enter\n");
1253 if (priv
->status
& STATUS_RUNNING
)
1257 * Initialize the hw - drive adapter to DO state by setting
1258 * init_done bit. Wait for clk_ready bit and Download
1261 if (ipw2100_download_firmware(priv
)) {
1262 printk(KERN_ERR DRV_NAME
1263 ": %s: Failed to power on the adapter.\n",
1264 priv
->net_dev
->name
);
1268 /* Clear the Tx, Rx and Msg queues and the r/w indexes
1269 * in the firmware RBD and TBD ring queue */
1270 ipw2100_queues_initialize(priv
);
1272 ipw2100_hw_set_gpio(priv
);
1274 /* TODO -- Look at disabling interrupts here to make sure none
1275 * get fired during FW initialization */
1277 /* Release ARC - clear reset bit */
1278 write_register(priv
->net_dev
, IPW_REG_RESET_REG
, 0);
1280 /* wait for f/w intialization complete */
1281 IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n");
1284 schedule_timeout_uninterruptible(msecs_to_jiffies(40));
1285 /* Todo... wait for sync command ... */
1287 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
1289 /* check "init done" bit */
1290 if (inta
& IPW2100_INTA_FW_INIT_DONE
) {
1291 /* reset "init done" bit */
1292 write_register(priv
->net_dev
, IPW_REG_INTA
,
1293 IPW2100_INTA_FW_INIT_DONE
);
1297 /* check error conditions : we check these after the firmware
1298 * check so that if there is an error, the interrupt handler
1299 * will see it and the adapter will be reset */
1301 (IPW2100_INTA_FATAL_ERROR
| IPW2100_INTA_PARITY_ERROR
)) {
1302 /* clear error conditions */
1303 write_register(priv
->net_dev
, IPW_REG_INTA
,
1304 IPW2100_INTA_FATAL_ERROR
|
1305 IPW2100_INTA_PARITY_ERROR
);
1309 /* Clear out any pending INTAs since we aren't supposed to have
1310 * interrupts enabled at this point... */
1311 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
1312 read_register(priv
->net_dev
, IPW_REG_INTA_MASK
, &inta_mask
);
1313 inta
&= IPW_INTERRUPT_MASK
;
1314 /* Clear out any pending interrupts */
1315 if (inta
& inta_mask
)
1316 write_register(priv
->net_dev
, IPW_REG_INTA
, inta
);
1318 IPW_DEBUG_FW("f/w initialization complete: %s\n",
1319 i
? "SUCCESS" : "FAILED");
1322 printk(KERN_WARNING DRV_NAME
1323 ": %s: Firmware did not initialize.\n",
1324 priv
->net_dev
->name
);
1328 /* allow firmware to write to GPIO1 & GPIO3 */
1329 read_register(priv
->net_dev
, IPW_REG_GPIO
, &gpio
);
1331 gpio
|= (IPW_BIT_GPIO_GPIO1_MASK
| IPW_BIT_GPIO_GPIO3_MASK
);
1333 write_register(priv
->net_dev
, IPW_REG_GPIO
, gpio
);
1335 /* Ready to receive commands */
1336 priv
->status
|= STATUS_RUNNING
;
1338 /* The adapter has been reset; we are not associated */
1339 priv
->status
&= ~(STATUS_ASSOCIATING
| STATUS_ASSOCIATED
);
1341 IPW_DEBUG_INFO("exit\n");
1346 static inline void ipw2100_reset_fatalerror(struct ipw2100_priv
*priv
)
1348 if (!priv
->fatal_error
)
1351 priv
->fatal_errors
[priv
->fatal_index
++] = priv
->fatal_error
;
1352 priv
->fatal_index
%= IPW2100_ERROR_QUEUE
;
1353 priv
->fatal_error
= 0;
1356 /* NOTE: Our interrupt is disabled when this method is called */
1357 static int ipw2100_power_cycle_adapter(struct ipw2100_priv
*priv
)
1362 IPW_DEBUG_INFO("Power cycling the hardware.\n");
1364 ipw2100_hw_set_gpio(priv
);
1366 /* Step 1. Stop Master Assert */
1367 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1368 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
1370 /* Step 2. Wait for stop Master Assert
1371 * (not more than 50us, otherwise ret error */
1374 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY
);
1375 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
1377 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
1381 priv
->status
&= ~STATUS_RESET_PENDING
;
1385 ("exit - waited too long for master assert stop\n");
1389 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1390 IPW_AUX_HOST_RESET_REG_SW_RESET
);
1392 /* Reset any fatal_error conditions */
1393 ipw2100_reset_fatalerror(priv
);
1395 /* At this point, the adapter is now stopped and disabled */
1396 priv
->status
&= ~(STATUS_RUNNING
| STATUS_ASSOCIATING
|
1397 STATUS_ASSOCIATED
| STATUS_ENABLED
);
1403 * Send the CARD_DISABLE_PHY_OFF command to the card to disable it
1405 * After disabling, if the card was associated, a STATUS_ASSN_LOST will be sent.
1407 * STATUS_CARD_DISABLE_NOTIFICATION will be sent regardless of
1408 * if STATUS_ASSN_LOST is sent.
1410 static int ipw2100_hw_phy_off(struct ipw2100_priv
*priv
)
1413 #define HW_PHY_OFF_LOOP_DELAY (HZ / 5000)
1415 struct host_command cmd
= {
1416 .host_command
= CARD_DISABLE_PHY_OFF
,
1417 .host_command_sequence
= 0,
1418 .host_command_length
= 0,
1423 IPW_DEBUG_HC("CARD_DISABLE_PHY_OFF\n");
1425 /* Turn off the radio */
1426 err
= ipw2100_hw_send_command(priv
, &cmd
);
1430 for (i
= 0; i
< 2500; i
++) {
1431 read_nic_dword(priv
->net_dev
, IPW2100_CONTROL_REG
, &val1
);
1432 read_nic_dword(priv
->net_dev
, IPW2100_COMMAND
, &val2
);
1434 if ((val1
& IPW2100_CONTROL_PHY_OFF
) &&
1435 (val2
& IPW2100_COMMAND_PHY_OFF
))
1438 schedule_timeout_uninterruptible(HW_PHY_OFF_LOOP_DELAY
);
1444 static int ipw2100_enable_adapter(struct ipw2100_priv
*priv
)
1446 struct host_command cmd
= {
1447 .host_command
= HOST_COMPLETE
,
1448 .host_command_sequence
= 0,
1449 .host_command_length
= 0
1453 IPW_DEBUG_HC("HOST_COMPLETE\n");
1455 if (priv
->status
& STATUS_ENABLED
)
1458 mutex_lock(&priv
->adapter_mutex
);
1460 if (rf_kill_active(priv
)) {
1461 IPW_DEBUG_HC("Command aborted due to RF kill active.\n");
1465 err
= ipw2100_hw_send_command(priv
, &cmd
);
1467 IPW_DEBUG_INFO("Failed to send HOST_COMPLETE command\n");
1471 err
= ipw2100_wait_for_card_state(priv
, IPW_HW_STATE_ENABLED
);
1473 IPW_DEBUG_INFO("%s: card not responding to init command.\n",
1474 priv
->net_dev
->name
);
1478 if (priv
->stop_hang_check
) {
1479 priv
->stop_hang_check
= 0;
1480 schedule_delayed_work(&priv
->hang_check
, HZ
/ 2);
1484 mutex_unlock(&priv
->adapter_mutex
);
1488 static int ipw2100_hw_stop_adapter(struct ipw2100_priv
*priv
)
1490 #define HW_POWER_DOWN_DELAY (msecs_to_jiffies(100))
1492 struct host_command cmd
= {
1493 .host_command
= HOST_PRE_POWER_DOWN
,
1494 .host_command_sequence
= 0,
1495 .host_command_length
= 0,
1500 if (!(priv
->status
& STATUS_RUNNING
))
1503 priv
->status
|= STATUS_STOPPING
;
1505 /* We can only shut down the card if the firmware is operational. So,
1506 * if we haven't reset since a fatal_error, then we can not send the
1507 * shutdown commands. */
1508 if (!priv
->fatal_error
) {
1509 /* First, make sure the adapter is enabled so that the PHY_OFF
1510 * command can shut it down */
1511 ipw2100_enable_adapter(priv
);
1513 err
= ipw2100_hw_phy_off(priv
);
1515 printk(KERN_WARNING DRV_NAME
1516 ": Error disabling radio %d\n", err
);
1519 * If in D0-standby mode going directly to D3 may cause a
1520 * PCI bus violation. Therefore we must change out of the D0
1523 * Sending the PREPARE_FOR_POWER_DOWN will restrict the
1524 * hardware from going into standby mode and will transition
1525 * out of D0-standby if it is already in that state.
1527 * STATUS_PREPARE_POWER_DOWN_COMPLETE will be sent by the
1528 * driver upon completion. Once received, the driver can
1529 * proceed to the D3 state.
1531 * Prepare for power down command to fw. This command would
1532 * take HW out of D0-standby and prepare it for D3 state.
1534 * Currently FW does not support event notification for this
1535 * event. Therefore, skip waiting for it. Just wait a fixed
1538 IPW_DEBUG_HC("HOST_PRE_POWER_DOWN\n");
1540 err
= ipw2100_hw_send_command(priv
, &cmd
);
1542 printk(KERN_WARNING DRV_NAME
": "
1543 "%s: Power down command failed: Error %d\n",
1544 priv
->net_dev
->name
, err
);
1546 schedule_timeout_uninterruptible(HW_POWER_DOWN_DELAY
);
1549 priv
->status
&= ~STATUS_ENABLED
;
1552 * Set GPIO 3 writable by FW; GPIO 1 writable
1553 * by driver and enable clock
1555 ipw2100_hw_set_gpio(priv
);
1558 * Power down adapter. Sequence:
1559 * 1. Stop master assert (RESET_REG[9]=1)
1560 * 2. Wait for stop master (RESET_REG[8]==1)
1561 * 3. S/w reset assert (RESET_REG[7] = 1)
1564 /* Stop master assert */
1565 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1566 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
1568 /* wait stop master not more than 50 usec.
1569 * Otherwise return error. */
1570 for (i
= 5; i
> 0; i
--) {
1573 /* Check master stop bit */
1574 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
1576 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
1581 printk(KERN_WARNING DRV_NAME
1582 ": %s: Could now power down adapter.\n",
1583 priv
->net_dev
->name
);
1585 /* assert s/w reset */
1586 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1587 IPW_AUX_HOST_RESET_REG_SW_RESET
);
1589 priv
->status
&= ~(STATUS_RUNNING
| STATUS_STOPPING
);
1594 static int ipw2100_disable_adapter(struct ipw2100_priv
*priv
)
1596 struct host_command cmd
= {
1597 .host_command
= CARD_DISABLE
,
1598 .host_command_sequence
= 0,
1599 .host_command_length
= 0
1603 IPW_DEBUG_HC("CARD_DISABLE\n");
1605 if (!(priv
->status
& STATUS_ENABLED
))
1608 /* Make sure we clear the associated state */
1609 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1611 if (!priv
->stop_hang_check
) {
1612 priv
->stop_hang_check
= 1;
1613 cancel_delayed_work(&priv
->hang_check
);
1616 mutex_lock(&priv
->adapter_mutex
);
1618 err
= ipw2100_hw_send_command(priv
, &cmd
);
1620 printk(KERN_WARNING DRV_NAME
1621 ": exit - failed to send CARD_DISABLE command\n");
1625 err
= ipw2100_wait_for_card_state(priv
, IPW_HW_STATE_DISABLED
);
1627 printk(KERN_WARNING DRV_NAME
1628 ": exit - card failed to change to DISABLED\n");
1632 IPW_DEBUG_INFO("TODO: implement scan state machine\n");
1635 mutex_unlock(&priv
->adapter_mutex
);
1639 static int ipw2100_set_scan_options(struct ipw2100_priv
*priv
)
1641 struct host_command cmd
= {
1642 .host_command
= SET_SCAN_OPTIONS
,
1643 .host_command_sequence
= 0,
1644 .host_command_length
= 8
1648 IPW_DEBUG_INFO("enter\n");
1650 IPW_DEBUG_SCAN("setting scan options\n");
1652 cmd
.host_command_parameters
[0] = 0;
1654 if (!(priv
->config
& CFG_ASSOCIATE
))
1655 cmd
.host_command_parameters
[0] |= IPW_SCAN_NOASSOCIATE
;
1656 if ((priv
->ieee
->sec
.flags
& SEC_ENABLED
) && priv
->ieee
->sec
.enabled
)
1657 cmd
.host_command_parameters
[0] |= IPW_SCAN_MIXED_CELL
;
1658 if (priv
->config
& CFG_PASSIVE_SCAN
)
1659 cmd
.host_command_parameters
[0] |= IPW_SCAN_PASSIVE
;
1661 cmd
.host_command_parameters
[1] = priv
->channel_mask
;
1663 err
= ipw2100_hw_send_command(priv
, &cmd
);
1665 IPW_DEBUG_HC("SET_SCAN_OPTIONS 0x%04X\n",
1666 cmd
.host_command_parameters
[0]);
1671 static int ipw2100_start_scan(struct ipw2100_priv
*priv
)
1673 struct host_command cmd
= {
1674 .host_command
= BROADCAST_SCAN
,
1675 .host_command_sequence
= 0,
1676 .host_command_length
= 4
1680 IPW_DEBUG_HC("START_SCAN\n");
1682 cmd
.host_command_parameters
[0] = 0;
1684 /* No scanning if in monitor mode */
1685 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
1688 if (priv
->status
& STATUS_SCANNING
) {
1689 IPW_DEBUG_SCAN("Scan requested while already in scan...\n");
1693 IPW_DEBUG_INFO("enter\n");
1695 /* Not clearing here; doing so makes iwlist always return nothing...
1697 * We should modify the table logic to use aging tables vs. clearing
1698 * the table on each scan start.
1700 IPW_DEBUG_SCAN("starting scan\n");
1702 priv
->status
|= STATUS_SCANNING
;
1703 err
= ipw2100_hw_send_command(priv
, &cmd
);
1705 priv
->status
&= ~STATUS_SCANNING
;
1707 IPW_DEBUG_INFO("exit\n");
1712 static const struct libipw_geo ipw_geos
[] = {
1716 .bg
= {{2412, 1}, {2417, 2}, {2422, 3},
1717 {2427, 4}, {2432, 5}, {2437, 6},
1718 {2442, 7}, {2447, 8}, {2452, 9},
1719 {2457, 10}, {2462, 11}, {2467, 12},
1720 {2472, 13}, {2484, 14}},
1724 static int ipw2100_up(struct ipw2100_priv
*priv
, int deferred
)
1726 unsigned long flags
;
1729 u32 ord_len
= sizeof(lock
);
1731 /* Age scan list entries found before suspend */
1732 if (priv
->suspend_time
) {
1733 libipw_networks_age(priv
->ieee
, priv
->suspend_time
);
1734 priv
->suspend_time
= 0;
1737 /* Quiet if manually disabled. */
1738 if (priv
->status
& STATUS_RF_KILL_SW
) {
1739 IPW_DEBUG_INFO("%s: Radio is disabled by Manual Disable "
1740 "switch\n", priv
->net_dev
->name
);
1744 /* the ipw2100 hardware really doesn't want power management delays
1745 * longer than 175usec
1747 pm_qos_update_request(&ipw2100_pm_qos_req
, 175);
1749 /* If the interrupt is enabled, turn it off... */
1750 spin_lock_irqsave(&priv
->low_lock
, flags
);
1751 ipw2100_disable_interrupts(priv
);
1753 /* Reset any fatal_error conditions */
1754 ipw2100_reset_fatalerror(priv
);
1755 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1757 if (priv
->status
& STATUS_POWERED
||
1758 (priv
->status
& STATUS_RESET_PENDING
)) {
1759 /* Power cycle the card ... */
1760 if (ipw2100_power_cycle_adapter(priv
)) {
1761 printk(KERN_WARNING DRV_NAME
1762 ": %s: Could not cycle adapter.\n",
1763 priv
->net_dev
->name
);
1768 priv
->status
|= STATUS_POWERED
;
1770 /* Load the firmware, start the clocks, etc. */
1771 if (ipw2100_start_adapter(priv
)) {
1772 printk(KERN_ERR DRV_NAME
1773 ": %s: Failed to start the firmware.\n",
1774 priv
->net_dev
->name
);
1779 ipw2100_initialize_ordinals(priv
);
1781 /* Determine capabilities of this particular HW configuration */
1782 if (ipw2100_get_hw_features(priv
)) {
1783 printk(KERN_ERR DRV_NAME
1784 ": %s: Failed to determine HW features.\n",
1785 priv
->net_dev
->name
);
1790 /* Initialize the geo */
1791 if (libipw_set_geo(priv
->ieee
, &ipw_geos
[0])) {
1792 printk(KERN_WARNING DRV_NAME
"Could not set geo\n");
1795 priv
->ieee
->freq_band
= LIBIPW_24GHZ_BAND
;
1798 if (ipw2100_set_ordinal(priv
, IPW_ORD_PERS_DB_LOCK
, &lock
, &ord_len
)) {
1799 printk(KERN_ERR DRV_NAME
1800 ": %s: Failed to clear ordinal lock.\n",
1801 priv
->net_dev
->name
);
1806 priv
->status
&= ~STATUS_SCANNING
;
1808 if (rf_kill_active(priv
)) {
1809 printk(KERN_INFO
"%s: Radio is disabled by RF switch.\n",
1810 priv
->net_dev
->name
);
1812 if (priv
->stop_rf_kill
) {
1813 priv
->stop_rf_kill
= 0;
1814 schedule_delayed_work(&priv
->rf_kill
,
1815 round_jiffies_relative(HZ
));
1821 /* Turn on the interrupt so that commands can be processed */
1822 ipw2100_enable_interrupts(priv
);
1824 /* Send all of the commands that must be sent prior to
1826 if (ipw2100_adapter_setup(priv
)) {
1827 printk(KERN_ERR DRV_NAME
": %s: Failed to start the card.\n",
1828 priv
->net_dev
->name
);
1834 /* Enable the adapter - sends HOST_COMPLETE */
1835 if (ipw2100_enable_adapter(priv
)) {
1836 printk(KERN_ERR DRV_NAME
": "
1837 "%s: failed in call to enable adapter.\n",
1838 priv
->net_dev
->name
);
1839 ipw2100_hw_stop_adapter(priv
);
1844 /* Start a scan . . . */
1845 ipw2100_set_scan_options(priv
);
1846 ipw2100_start_scan(priv
);
1853 static void ipw2100_down(struct ipw2100_priv
*priv
)
1855 unsigned long flags
;
1856 union iwreq_data wrqu
= {
1858 .sa_family
= ARPHRD_ETHER
}
1860 int associated
= priv
->status
& STATUS_ASSOCIATED
;
1862 /* Kill the RF switch timer */
1863 if (!priv
->stop_rf_kill
) {
1864 priv
->stop_rf_kill
= 1;
1865 cancel_delayed_work(&priv
->rf_kill
);
1868 /* Kill the firmware hang check timer */
1869 if (!priv
->stop_hang_check
) {
1870 priv
->stop_hang_check
= 1;
1871 cancel_delayed_work(&priv
->hang_check
);
1874 /* Kill any pending resets */
1875 if (priv
->status
& STATUS_RESET_PENDING
)
1876 cancel_delayed_work(&priv
->reset_work
);
1878 /* Make sure the interrupt is on so that FW commands will be
1879 * processed correctly */
1880 spin_lock_irqsave(&priv
->low_lock
, flags
);
1881 ipw2100_enable_interrupts(priv
);
1882 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1884 if (ipw2100_hw_stop_adapter(priv
))
1885 printk(KERN_ERR DRV_NAME
": %s: Error stopping adapter.\n",
1886 priv
->net_dev
->name
);
1888 /* Do not disable the interrupt until _after_ we disable
1889 * the adaptor. Otherwise the CARD_DISABLE command will never
1890 * be ack'd by the firmware */
1891 spin_lock_irqsave(&priv
->low_lock
, flags
);
1892 ipw2100_disable_interrupts(priv
);
1893 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1895 pm_qos_update_request(&ipw2100_pm_qos_req
, PM_QOS_DEFAULT_VALUE
);
1897 /* We have to signal any supplicant if we are disassociating */
1899 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
1901 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1902 netif_carrier_off(priv
->net_dev
);
1903 netif_stop_queue(priv
->net_dev
);
1906 /* Called by register_netdev() */
1907 static int ipw2100_net_init(struct net_device
*dev
)
1909 struct ipw2100_priv
*priv
= libipw_priv(dev
);
1911 return ipw2100_up(priv
, 1);
1914 static int ipw2100_wdev_init(struct net_device
*dev
)
1916 struct ipw2100_priv
*priv
= libipw_priv(dev
);
1917 const struct libipw_geo
*geo
= libipw_get_geo(priv
->ieee
);
1918 struct wireless_dev
*wdev
= &priv
->ieee
->wdev
;
1921 memcpy(wdev
->wiphy
->perm_addr
, priv
->mac_addr
, ETH_ALEN
);
1923 /* fill-out priv->ieee->bg_band */
1924 if (geo
->bg_channels
) {
1925 struct ieee80211_supported_band
*bg_band
= &priv
->ieee
->bg_band
;
1927 bg_band
->band
= IEEE80211_BAND_2GHZ
;
1928 bg_band
->n_channels
= geo
->bg_channels
;
1929 bg_band
->channels
= kcalloc(geo
->bg_channels
,
1930 sizeof(struct ieee80211_channel
),
1932 if (!bg_band
->channels
) {
1936 /* translate geo->bg to bg_band.channels */
1937 for (i
= 0; i
< geo
->bg_channels
; i
++) {
1938 bg_band
->channels
[i
].band
= IEEE80211_BAND_2GHZ
;
1939 bg_band
->channels
[i
].center_freq
= geo
->bg
[i
].freq
;
1940 bg_band
->channels
[i
].hw_value
= geo
->bg
[i
].channel
;
1941 bg_band
->channels
[i
].max_power
= geo
->bg
[i
].max_power
;
1942 if (geo
->bg
[i
].flags
& LIBIPW_CH_PASSIVE_ONLY
)
1943 bg_band
->channels
[i
].flags
|=
1944 IEEE80211_CHAN_PASSIVE_SCAN
;
1945 if (geo
->bg
[i
].flags
& LIBIPW_CH_NO_IBSS
)
1946 bg_band
->channels
[i
].flags
|=
1947 IEEE80211_CHAN_NO_IBSS
;
1948 if (geo
->bg
[i
].flags
& LIBIPW_CH_RADAR_DETECT
)
1949 bg_band
->channels
[i
].flags
|=
1950 IEEE80211_CHAN_RADAR
;
1951 /* No equivalent for LIBIPW_CH_80211H_RULES,
1952 LIBIPW_CH_UNIFORM_SPREADING, or
1953 LIBIPW_CH_B_ONLY... */
1955 /* point at bitrate info */
1956 bg_band
->bitrates
= ipw2100_bg_rates
;
1957 bg_band
->n_bitrates
= RATE_COUNT
;
1959 wdev
->wiphy
->bands
[IEEE80211_BAND_2GHZ
] = bg_band
;
1962 wdev
->wiphy
->cipher_suites
= ipw_cipher_suites
;
1963 wdev
->wiphy
->n_cipher_suites
= ARRAY_SIZE(ipw_cipher_suites
);
1965 set_wiphy_dev(wdev
->wiphy
, &priv
->pci_dev
->dev
);
1966 if (wiphy_register(wdev
->wiphy
)) {
1973 static void ipw2100_reset_adapter(struct work_struct
*work
)
1975 struct ipw2100_priv
*priv
=
1976 container_of(work
, struct ipw2100_priv
, reset_work
.work
);
1977 unsigned long flags
;
1978 union iwreq_data wrqu
= {
1980 .sa_family
= ARPHRD_ETHER
}
1982 int associated
= priv
->status
& STATUS_ASSOCIATED
;
1984 spin_lock_irqsave(&priv
->low_lock
, flags
);
1985 IPW_DEBUG_INFO(": %s: Restarting adapter.\n", priv
->net_dev
->name
);
1987 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1988 priv
->status
|= STATUS_SECURITY_UPDATED
;
1990 /* Force a power cycle even if interface hasn't been opened
1992 cancel_delayed_work(&priv
->reset_work
);
1993 priv
->status
|= STATUS_RESET_PENDING
;
1994 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1996 mutex_lock(&priv
->action_mutex
);
1997 /* stop timed checks so that they don't interfere with reset */
1998 priv
->stop_hang_check
= 1;
1999 cancel_delayed_work(&priv
->hang_check
);
2001 /* We have to signal any supplicant if we are disassociating */
2003 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
2005 ipw2100_up(priv
, 0);
2006 mutex_unlock(&priv
->action_mutex
);
2010 static void isr_indicate_associated(struct ipw2100_priv
*priv
, u32 status
)
2013 #define MAC_ASSOCIATION_READ_DELAY (HZ)
2015 unsigned int len
, essid_len
;
2016 char essid
[IW_ESSID_MAX_SIZE
];
2021 DECLARE_SSID_BUF(ssid
);
2024 * TBD: BSSID is usually 00:00:00:00:00:00 here and not
2025 * an actual MAC of the AP. Seems like FW sets this
2026 * address too late. Read it later and expose through
2027 * /proc or schedule a later task to query and update
2030 essid_len
= IW_ESSID_MAX_SIZE
;
2031 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_SSID
,
2034 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2040 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_CURRENT_TX_RATE
, &txrate
, &len
);
2042 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2048 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_OUR_FREQ
, &chan
, &len
);
2050 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2055 ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
, &bssid
, &len
);
2057 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2061 memcpy(priv
->ieee
->bssid
, bssid
, ETH_ALEN
);
2064 case TX_RATE_1_MBIT
:
2065 txratename
= "1Mbps";
2067 case TX_RATE_2_MBIT
:
2068 txratename
= "2Mbsp";
2070 case TX_RATE_5_5_MBIT
:
2071 txratename
= "5.5Mbps";
2073 case TX_RATE_11_MBIT
:
2074 txratename
= "11Mbps";
2077 IPW_DEBUG_INFO("Unknown rate: %d\n", txrate
);
2078 txratename
= "unknown rate";
2082 IPW_DEBUG_INFO("%s: Associated with '%s' at %s, channel %d (BSSID=%pM)\n",
2083 priv
->net_dev
->name
, print_ssid(ssid
, essid
, essid_len
),
2084 txratename
, chan
, bssid
);
2086 /* now we copy read ssid into dev */
2087 if (!(priv
->config
& CFG_STATIC_ESSID
)) {
2088 priv
->essid_len
= min((u8
) essid_len
, (u8
) IW_ESSID_MAX_SIZE
);
2089 memcpy(priv
->essid
, essid
, priv
->essid_len
);
2091 priv
->channel
= chan
;
2092 memcpy(priv
->bssid
, bssid
, ETH_ALEN
);
2094 priv
->status
|= STATUS_ASSOCIATING
;
2095 priv
->connect_start
= get_seconds();
2097 schedule_delayed_work(&priv
->wx_event_work
, HZ
/ 10);
2100 static int ipw2100_set_essid(struct ipw2100_priv
*priv
, char *essid
,
2101 int length
, int batch_mode
)
2103 int ssid_len
= min(length
, IW_ESSID_MAX_SIZE
);
2104 struct host_command cmd
= {
2105 .host_command
= SSID
,
2106 .host_command_sequence
= 0,
2107 .host_command_length
= ssid_len
2110 DECLARE_SSID_BUF(ssid
);
2112 IPW_DEBUG_HC("SSID: '%s'\n", print_ssid(ssid
, essid
, ssid_len
));
2115 memcpy(cmd
.host_command_parameters
, essid
, ssid_len
);
2118 err
= ipw2100_disable_adapter(priv
);
2123 /* Bug in FW currently doesn't honor bit 0 in SET_SCAN_OPTIONS to
2124 * disable auto association -- so we cheat by setting a bogus SSID */
2125 if (!ssid_len
&& !(priv
->config
& CFG_ASSOCIATE
)) {
2127 u8
*bogus
= (u8
*) cmd
.host_command_parameters
;
2128 for (i
= 0; i
< IW_ESSID_MAX_SIZE
; i
++)
2129 bogus
[i
] = 0x18 + i
;
2130 cmd
.host_command_length
= IW_ESSID_MAX_SIZE
;
2133 /* NOTE: We always send the SSID command even if the provided ESSID is
2134 * the same as what we currently think is set. */
2136 err
= ipw2100_hw_send_command(priv
, &cmd
);
2138 memset(priv
->essid
+ ssid_len
, 0, IW_ESSID_MAX_SIZE
- ssid_len
);
2139 memcpy(priv
->essid
, essid
, ssid_len
);
2140 priv
->essid_len
= ssid_len
;
2144 if (ipw2100_enable_adapter(priv
))
2151 static void isr_indicate_association_lost(struct ipw2100_priv
*priv
, u32 status
)
2153 DECLARE_SSID_BUF(ssid
);
2155 IPW_DEBUG(IPW_DL_NOTIF
| IPW_DL_STATE
| IPW_DL_ASSOC
,
2156 "disassociated: '%s' %pM\n",
2157 print_ssid(ssid
, priv
->essid
, priv
->essid_len
),
2160 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
2162 if (priv
->status
& STATUS_STOPPING
) {
2163 IPW_DEBUG_INFO("Card is stopping itself, discard ASSN_LOST.\n");
2167 memset(priv
->bssid
, 0, ETH_ALEN
);
2168 memset(priv
->ieee
->bssid
, 0, ETH_ALEN
);
2170 netif_carrier_off(priv
->net_dev
);
2171 netif_stop_queue(priv
->net_dev
);
2173 if (!(priv
->status
& STATUS_RUNNING
))
2176 if (priv
->status
& STATUS_SECURITY_UPDATED
)
2177 schedule_delayed_work(&priv
->security_work
, 0);
2179 schedule_delayed_work(&priv
->wx_event_work
, 0);
2182 static void isr_indicate_rf_kill(struct ipw2100_priv
*priv
, u32 status
)
2184 IPW_DEBUG_INFO("%s: RF Kill state changed to radio OFF.\n",
2185 priv
->net_dev
->name
);
2187 /* RF_KILL is now enabled (else we wouldn't be here) */
2188 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, true);
2189 priv
->status
|= STATUS_RF_KILL_HW
;
2191 /* Make sure the RF Kill check timer is running */
2192 priv
->stop_rf_kill
= 0;
2193 cancel_delayed_work(&priv
->rf_kill
);
2194 schedule_delayed_work(&priv
->rf_kill
, round_jiffies_relative(HZ
));
2197 static void send_scan_event(void *data
)
2199 struct ipw2100_priv
*priv
= data
;
2200 union iwreq_data wrqu
;
2202 wrqu
.data
.length
= 0;
2203 wrqu
.data
.flags
= 0;
2204 wireless_send_event(priv
->net_dev
, SIOCGIWSCAN
, &wrqu
, NULL
);
2207 static void ipw2100_scan_event_later(struct work_struct
*work
)
2209 send_scan_event(container_of(work
, struct ipw2100_priv
,
2210 scan_event_later
.work
));
2213 static void ipw2100_scan_event_now(struct work_struct
*work
)
2215 send_scan_event(container_of(work
, struct ipw2100_priv
,
2219 static void isr_scan_complete(struct ipw2100_priv
*priv
, u32 status
)
2221 IPW_DEBUG_SCAN("scan complete\n");
2222 /* Age the scan results... */
2223 priv
->ieee
->scans
++;
2224 priv
->status
&= ~STATUS_SCANNING
;
2226 /* Only userspace-requested scan completion events go out immediately */
2227 if (!priv
->user_requested_scan
) {
2228 if (!delayed_work_pending(&priv
->scan_event_later
))
2229 schedule_delayed_work(&priv
->scan_event_later
,
2230 round_jiffies_relative(msecs_to_jiffies(4000)));
2232 priv
->user_requested_scan
= 0;
2233 cancel_delayed_work(&priv
->scan_event_later
);
2234 schedule_work(&priv
->scan_event_now
);
2238 #ifdef CONFIG_IPW2100_DEBUG
2239 #define IPW2100_HANDLER(v, f) { v, f, # v }
2240 struct ipw2100_status_indicator
{
2242 void (*cb
) (struct ipw2100_priv
* priv
, u32 status
);
2246 #define IPW2100_HANDLER(v, f) { v, f }
2247 struct ipw2100_status_indicator
{
2249 void (*cb
) (struct ipw2100_priv
* priv
, u32 status
);
2251 #endif /* CONFIG_IPW2100_DEBUG */
2253 static void isr_indicate_scanning(struct ipw2100_priv
*priv
, u32 status
)
2255 IPW_DEBUG_SCAN("Scanning...\n");
2256 priv
->status
|= STATUS_SCANNING
;
2259 static const struct ipw2100_status_indicator status_handlers
[] = {
2260 IPW2100_HANDLER(IPW_STATE_INITIALIZED
, NULL
),
2261 IPW2100_HANDLER(IPW_STATE_COUNTRY_FOUND
, NULL
),
2262 IPW2100_HANDLER(IPW_STATE_ASSOCIATED
, isr_indicate_associated
),
2263 IPW2100_HANDLER(IPW_STATE_ASSN_LOST
, isr_indicate_association_lost
),
2264 IPW2100_HANDLER(IPW_STATE_ASSN_CHANGED
, NULL
),
2265 IPW2100_HANDLER(IPW_STATE_SCAN_COMPLETE
, isr_scan_complete
),
2266 IPW2100_HANDLER(IPW_STATE_ENTERED_PSP
, NULL
),
2267 IPW2100_HANDLER(IPW_STATE_LEFT_PSP
, NULL
),
2268 IPW2100_HANDLER(IPW_STATE_RF_KILL
, isr_indicate_rf_kill
),
2269 IPW2100_HANDLER(IPW_STATE_DISABLED
, NULL
),
2270 IPW2100_HANDLER(IPW_STATE_POWER_DOWN
, NULL
),
2271 IPW2100_HANDLER(IPW_STATE_SCANNING
, isr_indicate_scanning
),
2272 IPW2100_HANDLER(-1, NULL
)
2275 static void isr_status_change(struct ipw2100_priv
*priv
, int status
)
2279 if (status
== IPW_STATE_SCANNING
&&
2280 priv
->status
& STATUS_ASSOCIATED
&&
2281 !(priv
->status
& STATUS_SCANNING
)) {
2282 IPW_DEBUG_INFO("Scan detected while associated, with "
2283 "no scan request. Restarting firmware.\n");
2285 /* Wake up any sleeping jobs */
2286 schedule_reset(priv
);
2289 for (i
= 0; status_handlers
[i
].status
!= -1; i
++) {
2290 if (status
== status_handlers
[i
].status
) {
2291 IPW_DEBUG_NOTIF("Status change: %s\n",
2292 status_handlers
[i
].name
);
2293 if (status_handlers
[i
].cb
)
2294 status_handlers
[i
].cb(priv
, status
);
2295 priv
->wstats
.status
= status
;
2300 IPW_DEBUG_NOTIF("unknown status received: %04x\n", status
);
2303 static void isr_rx_complete_command(struct ipw2100_priv
*priv
,
2304 struct ipw2100_cmd_header
*cmd
)
2306 #ifdef CONFIG_IPW2100_DEBUG
2307 if (cmd
->host_command_reg
< ARRAY_SIZE(command_types
)) {
2308 IPW_DEBUG_HC("Command completed '%s (%d)'\n",
2309 command_types
[cmd
->host_command_reg
],
2310 cmd
->host_command_reg
);
2313 if (cmd
->host_command_reg
== HOST_COMPLETE
)
2314 priv
->status
|= STATUS_ENABLED
;
2316 if (cmd
->host_command_reg
== CARD_DISABLE
)
2317 priv
->status
&= ~STATUS_ENABLED
;
2319 priv
->status
&= ~STATUS_CMD_ACTIVE
;
2321 wake_up_interruptible(&priv
->wait_command_queue
);
2324 #ifdef CONFIG_IPW2100_DEBUG
2325 static const char *frame_types
[] = {
2326 "COMMAND_STATUS_VAL",
2327 "STATUS_CHANGE_VAL",
2330 "HOST_NOTIFICATION_VAL"
2334 static int ipw2100_alloc_skb(struct ipw2100_priv
*priv
,
2335 struct ipw2100_rx_packet
*packet
)
2337 packet
->skb
= dev_alloc_skb(sizeof(struct ipw2100_rx
));
2341 packet
->rxp
= (struct ipw2100_rx
*)packet
->skb
->data
;
2342 packet
->dma_addr
= pci_map_single(priv
->pci_dev
, packet
->skb
->data
,
2343 sizeof(struct ipw2100_rx
),
2344 PCI_DMA_FROMDEVICE
);
2345 /* NOTE: pci_map_single does not return an error code, and 0 is a valid
2351 #define SEARCH_ERROR 0xffffffff
2352 #define SEARCH_FAIL 0xfffffffe
2353 #define SEARCH_SUCCESS 0xfffffff0
2354 #define SEARCH_DISCARD 0
2355 #define SEARCH_SNAPSHOT 1
2357 #define SNAPSHOT_ADDR(ofs) (priv->snapshot[((ofs) >> 12) & 0xff] + ((ofs) & 0xfff))
2358 static void ipw2100_snapshot_free(struct ipw2100_priv
*priv
)
2361 if (!priv
->snapshot
[0])
2363 for (i
= 0; i
< 0x30; i
++)
2364 kfree(priv
->snapshot
[i
]);
2365 priv
->snapshot
[0] = NULL
;
2368 #ifdef IPW2100_DEBUG_C3
2369 static int ipw2100_snapshot_alloc(struct ipw2100_priv
*priv
)
2372 if (priv
->snapshot
[0])
2374 for (i
= 0; i
< 0x30; i
++) {
2375 priv
->snapshot
[i
] = kmalloc(0x1000, GFP_ATOMIC
);
2376 if (!priv
->snapshot
[i
]) {
2377 IPW_DEBUG_INFO("%s: Error allocating snapshot "
2378 "buffer %d\n", priv
->net_dev
->name
, i
);
2380 kfree(priv
->snapshot
[--i
]);
2381 priv
->snapshot
[0] = NULL
;
2389 static u32
ipw2100_match_buf(struct ipw2100_priv
*priv
, u8
* in_buf
,
2390 size_t len
, int mode
)
2398 if (mode
== SEARCH_SNAPSHOT
) {
2399 if (!ipw2100_snapshot_alloc(priv
))
2400 mode
= SEARCH_DISCARD
;
2403 for (ret
= SEARCH_FAIL
, i
= 0; i
< 0x30000; i
+= 4) {
2404 read_nic_dword(priv
->net_dev
, i
, &tmp
);
2405 if (mode
== SEARCH_SNAPSHOT
)
2406 *(u32
*) SNAPSHOT_ADDR(i
) = tmp
;
2407 if (ret
== SEARCH_FAIL
) {
2409 for (j
= 0; j
< 4; j
++) {
2418 if ((s
- in_buf
) == len
)
2419 ret
= (i
+ j
) - len
+ 1;
2421 } else if (mode
== SEARCH_DISCARD
)
2431 * 0) Disconnect the SKB from the firmware (just unmap)
2432 * 1) Pack the ETH header into the SKB
2433 * 2) Pass the SKB to the network stack
2435 * When packet is provided by the firmware, it contains the following:
2440 * The size of the constructed ethernet
2443 #ifdef IPW2100_RX_DEBUG
2444 static u8 packet_data
[IPW_RX_NIC_BUFFER_LENGTH
];
2447 static void ipw2100_corruption_detected(struct ipw2100_priv
*priv
, int i
)
2449 #ifdef IPW2100_DEBUG_C3
2450 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2455 IPW_DEBUG_INFO(": PCI latency error detected at 0x%04zX.\n",
2456 i
* sizeof(struct ipw2100_status
));
2458 #ifdef IPW2100_DEBUG_C3
2459 /* Halt the firmware so we can get a good image */
2460 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
2461 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
2464 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY
);
2465 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
2467 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
2471 match
= ipw2100_match_buf(priv
, (u8
*) status
,
2472 sizeof(struct ipw2100_status
),
2474 if (match
< SEARCH_SUCCESS
)
2475 IPW_DEBUG_INFO("%s: DMA status match in Firmware at "
2476 "offset 0x%06X, length %d:\n",
2477 priv
->net_dev
->name
, match
,
2478 sizeof(struct ipw2100_status
));
2480 IPW_DEBUG_INFO("%s: No DMA status match in "
2481 "Firmware.\n", priv
->net_dev
->name
);
2483 printk_buf((u8
*) priv
->status_queue
.drv
,
2484 sizeof(struct ipw2100_status
) * RX_QUEUE_LENGTH
);
2487 priv
->fatal_error
= IPW2100_ERR_C3_CORRUPTION
;
2488 priv
->net_dev
->stats
.rx_errors
++;
2489 schedule_reset(priv
);
2492 static void isr_rx(struct ipw2100_priv
*priv
, int i
,
2493 struct libipw_rx_stats
*stats
)
2495 struct net_device
*dev
= priv
->net_dev
;
2496 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2497 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
2499 IPW_DEBUG_RX("Handler...\n");
2501 if (unlikely(status
->frame_size
> skb_tailroom(packet
->skb
))) {
2502 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2505 status
->frame_size
, skb_tailroom(packet
->skb
));
2506 dev
->stats
.rx_errors
++;
2510 if (unlikely(!netif_running(dev
))) {
2511 dev
->stats
.rx_errors
++;
2512 priv
->wstats
.discard
.misc
++;
2513 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2517 if (unlikely(priv
->ieee
->iw_mode
!= IW_MODE_MONITOR
&&
2518 !(priv
->status
& STATUS_ASSOCIATED
))) {
2519 IPW_DEBUG_DROP("Dropping packet while not associated.\n");
2520 priv
->wstats
.discard
.misc
++;
2524 pci_unmap_single(priv
->pci_dev
,
2526 sizeof(struct ipw2100_rx
), PCI_DMA_FROMDEVICE
);
2528 skb_put(packet
->skb
, status
->frame_size
);
2530 #ifdef IPW2100_RX_DEBUG
2531 /* Make a copy of the frame so we can dump it to the logs if
2532 * libipw_rx fails */
2533 skb_copy_from_linear_data(packet
->skb
, packet_data
,
2534 min_t(u32
, status
->frame_size
,
2535 IPW_RX_NIC_BUFFER_LENGTH
));
2538 if (!libipw_rx(priv
->ieee
, packet
->skb
, stats
)) {
2539 #ifdef IPW2100_RX_DEBUG
2540 IPW_DEBUG_DROP("%s: Non consumed packet:\n",
2542 printk_buf(IPW_DL_DROP
, packet_data
, status
->frame_size
);
2544 dev
->stats
.rx_errors
++;
2546 /* libipw_rx failed, so it didn't free the SKB */
2547 dev_kfree_skb_any(packet
->skb
);
2551 /* We need to allocate a new SKB and attach it to the RDB. */
2552 if (unlikely(ipw2100_alloc_skb(priv
, packet
))) {
2553 printk(KERN_WARNING DRV_NAME
": "
2554 "%s: Unable to allocate SKB onto RBD ring - disabling "
2555 "adapter.\n", dev
->name
);
2556 /* TODO: schedule adapter shutdown */
2557 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2560 /* Update the RDB entry */
2561 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
2564 #ifdef CONFIG_IPW2100_MONITOR
2566 static void isr_rx_monitor(struct ipw2100_priv
*priv
, int i
,
2567 struct libipw_rx_stats
*stats
)
2569 struct net_device
*dev
= priv
->net_dev
;
2570 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2571 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
2573 /* Magic struct that slots into the radiotap header -- no reason
2574 * to build this manually element by element, we can write it much
2575 * more efficiently than we can parse it. ORDER MATTERS HERE */
2577 struct ieee80211_radiotap_header rt_hdr
;
2578 s8 rt_dbmsignal
; /* signal in dbM, kluged to signed */
2581 IPW_DEBUG_RX("Handler...\n");
2583 if (unlikely(status
->frame_size
> skb_tailroom(packet
->skb
) -
2584 sizeof(struct ipw_rt_hdr
))) {
2585 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2589 skb_tailroom(packet
->skb
));
2590 dev
->stats
.rx_errors
++;
2594 if (unlikely(!netif_running(dev
))) {
2595 dev
->stats
.rx_errors
++;
2596 priv
->wstats
.discard
.misc
++;
2597 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2601 if (unlikely(priv
->config
& CFG_CRC_CHECK
&&
2602 status
->flags
& IPW_STATUS_FLAG_CRC_ERROR
)) {
2603 IPW_DEBUG_RX("CRC error in packet. Dropping.\n");
2604 dev
->stats
.rx_errors
++;
2608 pci_unmap_single(priv
->pci_dev
, packet
->dma_addr
,
2609 sizeof(struct ipw2100_rx
), PCI_DMA_FROMDEVICE
);
2610 memmove(packet
->skb
->data
+ sizeof(struct ipw_rt_hdr
),
2611 packet
->skb
->data
, status
->frame_size
);
2613 ipw_rt
= (struct ipw_rt_hdr
*) packet
->skb
->data
;
2615 ipw_rt
->rt_hdr
.it_version
= PKTHDR_RADIOTAP_VERSION
;
2616 ipw_rt
->rt_hdr
.it_pad
= 0; /* always good to zero */
2617 ipw_rt
->rt_hdr
.it_len
= cpu_to_le16(sizeof(struct ipw_rt_hdr
)); /* total hdr+data */
2619 ipw_rt
->rt_hdr
.it_present
= cpu_to_le32(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL
);
2621 ipw_rt
->rt_dbmsignal
= status
->rssi
+ IPW2100_RSSI_TO_DBM
;
2623 skb_put(packet
->skb
, status
->frame_size
+ sizeof(struct ipw_rt_hdr
));
2625 if (!libipw_rx(priv
->ieee
, packet
->skb
, stats
)) {
2626 dev
->stats
.rx_errors
++;
2628 /* libipw_rx failed, so it didn't free the SKB */
2629 dev_kfree_skb_any(packet
->skb
);
2633 /* We need to allocate a new SKB and attach it to the RDB. */
2634 if (unlikely(ipw2100_alloc_skb(priv
, packet
))) {
2636 "%s: Unable to allocate SKB onto RBD ring - disabling "
2637 "adapter.\n", dev
->name
);
2638 /* TODO: schedule adapter shutdown */
2639 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2642 /* Update the RDB entry */
2643 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
2648 static int ipw2100_corruption_check(struct ipw2100_priv
*priv
, int i
)
2650 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2651 struct ipw2100_rx
*u
= priv
->rx_buffers
[i
].rxp
;
2652 u16 frame_type
= status
->status_fields
& STATUS_TYPE_MASK
;
2654 switch (frame_type
) {
2655 case COMMAND_STATUS_VAL
:
2656 return (status
->frame_size
!= sizeof(u
->rx_data
.command
));
2657 case STATUS_CHANGE_VAL
:
2658 return (status
->frame_size
!= sizeof(u
->rx_data
.status
));
2659 case HOST_NOTIFICATION_VAL
:
2660 return (status
->frame_size
< sizeof(u
->rx_data
.notification
));
2661 case P80211_DATA_VAL
:
2662 case P8023_DATA_VAL
:
2663 #ifdef CONFIG_IPW2100_MONITOR
2666 switch (WLAN_FC_GET_TYPE(le16_to_cpu(u
->rx_data
.header
.frame_ctl
))) {
2667 case IEEE80211_FTYPE_MGMT
:
2668 case IEEE80211_FTYPE_CTL
:
2670 case IEEE80211_FTYPE_DATA
:
2671 return (status
->frame_size
>
2672 IPW_MAX_802_11_PAYLOAD_LENGTH
);
2681 * ipw2100 interrupts are disabled at this point, and the ISR
2682 * is the only code that calls this method. So, we do not need
2683 * to play with any locks.
2685 * RX Queue works as follows:
2687 * Read index - firmware places packet in entry identified by the
2688 * Read index and advances Read index. In this manner,
2689 * Read index will always point to the next packet to
2690 * be filled--but not yet valid.
2692 * Write index - driver fills this entry with an unused RBD entry.
2693 * This entry has not filled by the firmware yet.
2695 * In between the W and R indexes are the RBDs that have been received
2696 * but not yet processed.
2698 * The process of handling packets will start at WRITE + 1 and advance
2699 * until it reaches the READ index.
2701 * The WRITE index is cached in the variable 'priv->rx_queue.next'.
2704 static void __ipw2100_rx_process(struct ipw2100_priv
*priv
)
2706 struct ipw2100_bd_queue
*rxq
= &priv
->rx_queue
;
2707 struct ipw2100_status_queue
*sq
= &priv
->status_queue
;
2708 struct ipw2100_rx_packet
*packet
;
2711 struct ipw2100_rx
*u
;
2712 struct libipw_rx_stats stats
= {
2713 .mac_time
= jiffies
,
2716 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_READ_INDEX
, &r
);
2717 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
, &w
);
2719 if (r
>= rxq
->entries
) {
2720 IPW_DEBUG_RX("exit - bad read index\n");
2724 i
= (rxq
->next
+ 1) % rxq
->entries
;
2727 /* IPW_DEBUG_RX("r = %d : w = %d : processing = %d\n",
2728 r, rxq->next, i); */
2730 packet
= &priv
->rx_buffers
[i
];
2732 /* Sync the DMA for the RX buffer so CPU is sure to get
2733 * the correct values */
2734 pci_dma_sync_single_for_cpu(priv
->pci_dev
, packet
->dma_addr
,
2735 sizeof(struct ipw2100_rx
),
2736 PCI_DMA_FROMDEVICE
);
2738 if (unlikely(ipw2100_corruption_check(priv
, i
))) {
2739 ipw2100_corruption_detected(priv
, i
);
2744 frame_type
= sq
->drv
[i
].status_fields
& STATUS_TYPE_MASK
;
2745 stats
.rssi
= sq
->drv
[i
].rssi
+ IPW2100_RSSI_TO_DBM
;
2746 stats
.len
= sq
->drv
[i
].frame_size
;
2749 if (stats
.rssi
!= 0)
2750 stats
.mask
|= LIBIPW_STATMASK_RSSI
;
2751 stats
.freq
= LIBIPW_24GHZ_BAND
;
2753 IPW_DEBUG_RX("%s: '%s' frame type received (%d).\n",
2754 priv
->net_dev
->name
, frame_types
[frame_type
],
2757 switch (frame_type
) {
2758 case COMMAND_STATUS_VAL
:
2759 /* Reset Rx watchdog */
2760 isr_rx_complete_command(priv
, &u
->rx_data
.command
);
2763 case STATUS_CHANGE_VAL
:
2764 isr_status_change(priv
, u
->rx_data
.status
);
2767 case P80211_DATA_VAL
:
2768 case P8023_DATA_VAL
:
2769 #ifdef CONFIG_IPW2100_MONITOR
2770 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
2771 isr_rx_monitor(priv
, i
, &stats
);
2775 if (stats
.len
< sizeof(struct libipw_hdr_3addr
))
2777 switch (WLAN_FC_GET_TYPE(le16_to_cpu(u
->rx_data
.header
.frame_ctl
))) {
2778 case IEEE80211_FTYPE_MGMT
:
2779 libipw_rx_mgt(priv
->ieee
,
2780 &u
->rx_data
.header
, &stats
);
2783 case IEEE80211_FTYPE_CTL
:
2786 case IEEE80211_FTYPE_DATA
:
2787 isr_rx(priv
, i
, &stats
);
2795 /* clear status field associated with this RBD */
2796 rxq
->drv
[i
].status
.info
.field
= 0;
2798 i
= (i
+ 1) % rxq
->entries
;
2802 /* backtrack one entry, wrapping to end if at 0 */
2803 rxq
->next
= (i
? i
: rxq
->entries
) - 1;
2805 write_register(priv
->net_dev
,
2806 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
, rxq
->next
);
2811 * __ipw2100_tx_process
2813 * This routine will determine whether the next packet on
2814 * the fw_pend_list has been processed by the firmware yet.
2816 * If not, then it does nothing and returns.
2818 * If so, then it removes the item from the fw_pend_list, frees
2819 * any associated storage, and places the item back on the
2820 * free list of its source (either msg_free_list or tx_free_list)
2822 * TX Queue works as follows:
2824 * Read index - points to the next TBD that the firmware will
2825 * process. The firmware will read the data, and once
2826 * done processing, it will advance the Read index.
2828 * Write index - driver fills this entry with an constructed TBD
2829 * entry. The Write index is not advanced until the
2830 * packet has been configured.
2832 * In between the W and R indexes are the TBDs that have NOT been
2833 * processed. Lagging behind the R index are packets that have
2834 * been processed but have not been freed by the driver.
2836 * In order to free old storage, an internal index will be maintained
2837 * that points to the next packet to be freed. When all used
2838 * packets have been freed, the oldest index will be the same as the
2839 * firmware's read index.
2841 * The OLDEST index is cached in the variable 'priv->tx_queue.oldest'
2843 * Because the TBD structure can not contain arbitrary data, the
2844 * driver must keep an internal queue of cached allocations such that
2845 * it can put that data back into the tx_free_list and msg_free_list
2846 * for use by future command and data packets.
2849 static int __ipw2100_tx_process(struct ipw2100_priv
*priv
)
2851 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
2852 struct ipw2100_bd
*tbd
;
2853 struct list_head
*element
;
2854 struct ipw2100_tx_packet
*packet
;
2855 int descriptors_used
;
2857 u32 r
, w
, frag_num
= 0;
2859 if (list_empty(&priv
->fw_pend_list
))
2862 element
= priv
->fw_pend_list
.next
;
2864 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
2865 tbd
= &txq
->drv
[packet
->index
];
2867 /* Determine how many TBD entries must be finished... */
2868 switch (packet
->type
) {
2870 /* COMMAND uses only one slot; don't advance */
2871 descriptors_used
= 1;
2876 /* DATA uses two slots; advance and loop position. */
2877 descriptors_used
= tbd
->num_fragments
;
2878 frag_num
= tbd
->num_fragments
- 1;
2879 e
= txq
->oldest
+ frag_num
;
2884 printk(KERN_WARNING DRV_NAME
": %s: Bad fw_pend_list entry!\n",
2885 priv
->net_dev
->name
);
2889 /* if the last TBD is not done by NIC yet, then packet is
2890 * not ready to be released.
2893 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX
,
2895 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
2898 printk(KERN_WARNING DRV_NAME
": %s: write index mismatch\n",
2899 priv
->net_dev
->name
);
2902 * txq->next is the index of the last packet written txq->oldest is
2903 * the index of the r is the index of the next packet to be read by
2908 * Quick graphic to help you visualize the following
2909 * if / else statement
2911 * ===>| s---->|===============
2913 * | a | b | c | d | e | f | g | h | i | j | k | l
2917 * w - updated by driver
2918 * r - updated by firmware
2919 * s - start of oldest BD entry (txq->oldest)
2920 * e - end of oldest BD entry
2923 if (!((r
<= w
&& (e
< r
|| e
>= w
)) || (e
< r
&& e
>= w
))) {
2924 IPW_DEBUG_TX("exit - no processed packets ready to release.\n");
2929 DEC_STAT(&priv
->fw_pend_stat
);
2931 #ifdef CONFIG_IPW2100_DEBUG
2934 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i
,
2936 (u32
) (txq
->nic
+ i
* sizeof(struct ipw2100_bd
)),
2937 txq
->drv
[i
].host_addr
, txq
->drv
[i
].buf_length
);
2939 if (packet
->type
== DATA
) {
2940 i
= (i
+ 1) % txq
->entries
;
2942 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i
,
2944 (u32
) (txq
->nic
+ i
*
2945 sizeof(struct ipw2100_bd
)),
2946 (u32
) txq
->drv
[i
].host_addr
,
2947 txq
->drv
[i
].buf_length
);
2952 switch (packet
->type
) {
2954 if (txq
->drv
[txq
->oldest
].status
.info
.fields
.txType
!= 0)
2955 printk(KERN_WARNING DRV_NAME
": %s: Queue mismatch. "
2956 "Expecting DATA TBD but pulled "
2957 "something else: ids %d=%d.\n",
2958 priv
->net_dev
->name
, txq
->oldest
, packet
->index
);
2960 /* DATA packet; we have to unmap and free the SKB */
2961 for (i
= 0; i
< frag_num
; i
++) {
2962 tbd
= &txq
->drv
[(packet
->index
+ 1 + i
) % txq
->entries
];
2964 IPW_DEBUG_TX("TX%d P=%08x L=%d\n",
2965 (packet
->index
+ 1 + i
) % txq
->entries
,
2966 tbd
->host_addr
, tbd
->buf_length
);
2968 pci_unmap_single(priv
->pci_dev
,
2970 tbd
->buf_length
, PCI_DMA_TODEVICE
);
2973 libipw_txb_free(packet
->info
.d_struct
.txb
);
2974 packet
->info
.d_struct
.txb
= NULL
;
2976 list_add_tail(element
, &priv
->tx_free_list
);
2977 INC_STAT(&priv
->tx_free_stat
);
2979 /* We have a free slot in the Tx queue, so wake up the
2980 * transmit layer if it is stopped. */
2981 if (priv
->status
& STATUS_ASSOCIATED
)
2982 netif_wake_queue(priv
->net_dev
);
2984 /* A packet was processed by the hardware, so update the
2986 priv
->net_dev
->trans_start
= jiffies
;
2991 if (txq
->drv
[txq
->oldest
].status
.info
.fields
.txType
!= 1)
2992 printk(KERN_WARNING DRV_NAME
": %s: Queue mismatch. "
2993 "Expecting COMMAND TBD but pulled "
2994 "something else: ids %d=%d.\n",
2995 priv
->net_dev
->name
, txq
->oldest
, packet
->index
);
2997 #ifdef CONFIG_IPW2100_DEBUG
2998 if (packet
->info
.c_struct
.cmd
->host_command_reg
<
2999 ARRAY_SIZE(command_types
))
3000 IPW_DEBUG_TX("Command '%s (%d)' processed: %d.\n",
3001 command_types
[packet
->info
.c_struct
.cmd
->
3003 packet
->info
.c_struct
.cmd
->
3005 packet
->info
.c_struct
.cmd
->cmd_status_reg
);
3008 list_add_tail(element
, &priv
->msg_free_list
);
3009 INC_STAT(&priv
->msg_free_stat
);
3013 /* advance oldest used TBD pointer to start of next entry */
3014 txq
->oldest
= (e
+ 1) % txq
->entries
;
3015 /* increase available TBDs number */
3016 txq
->available
+= descriptors_used
;
3017 SET_STAT(&priv
->txq_stat
, txq
->available
);
3019 IPW_DEBUG_TX("packet latency (send to process) %ld jiffies\n",
3020 jiffies
- packet
->jiffy_start
);
3022 return (!list_empty(&priv
->fw_pend_list
));
3025 static inline void __ipw2100_tx_complete(struct ipw2100_priv
*priv
)
3029 while (__ipw2100_tx_process(priv
) && i
< 200)
3033 printk(KERN_WARNING DRV_NAME
": "
3034 "%s: Driver is running slow (%d iters).\n",
3035 priv
->net_dev
->name
, i
);
3039 static void ipw2100_tx_send_commands(struct ipw2100_priv
*priv
)
3041 struct list_head
*element
;
3042 struct ipw2100_tx_packet
*packet
;
3043 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
3044 struct ipw2100_bd
*tbd
;
3045 int next
= txq
->next
;
3047 while (!list_empty(&priv
->msg_pend_list
)) {
3048 /* if there isn't enough space in TBD queue, then
3049 * don't stuff a new one in.
3050 * NOTE: 3 are needed as a command will take one,
3051 * and there is a minimum of 2 that must be
3052 * maintained between the r and w indexes
3054 if (txq
->available
<= 3) {
3055 IPW_DEBUG_TX("no room in tx_queue\n");
3059 element
= priv
->msg_pend_list
.next
;
3061 DEC_STAT(&priv
->msg_pend_stat
);
3063 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3065 IPW_DEBUG_TX("using TBD at virt=%p, phys=%04X\n",
3066 &txq
->drv
[txq
->next
],
3067 (u32
) (txq
->nic
+ txq
->next
*
3068 sizeof(struct ipw2100_bd
)));
3070 packet
->index
= txq
->next
;
3072 tbd
= &txq
->drv
[txq
->next
];
3074 /* initialize TBD */
3075 tbd
->host_addr
= packet
->info
.c_struct
.cmd_phys
;
3076 tbd
->buf_length
= sizeof(struct ipw2100_cmd_header
);
3077 /* not marking number of fragments causes problems
3078 * with f/w debug version */
3079 tbd
->num_fragments
= 1;
3080 tbd
->status
.info
.field
=
3081 IPW_BD_STATUS_TX_FRAME_COMMAND
|
3082 IPW_BD_STATUS_TX_INTERRUPT_ENABLE
;
3084 /* update TBD queue counters */
3086 txq
->next
%= txq
->entries
;
3088 DEC_STAT(&priv
->txq_stat
);
3090 list_add_tail(element
, &priv
->fw_pend_list
);
3091 INC_STAT(&priv
->fw_pend_stat
);
3094 if (txq
->next
!= next
) {
3095 /* kick off the DMA by notifying firmware the
3096 * write index has moved; make sure TBD stores are sync'd */
3098 write_register(priv
->net_dev
,
3099 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
3105 * ipw2100_tx_send_data
3108 static void ipw2100_tx_send_data(struct ipw2100_priv
*priv
)
3110 struct list_head
*element
;
3111 struct ipw2100_tx_packet
*packet
;
3112 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
3113 struct ipw2100_bd
*tbd
;
3114 int next
= txq
->next
;
3116 struct ipw2100_data_header
*ipw_hdr
;
3117 struct libipw_hdr_3addr
*hdr
;
3119 while (!list_empty(&priv
->tx_pend_list
)) {
3120 /* if there isn't enough space in TBD queue, then
3121 * don't stuff a new one in.
3122 * NOTE: 4 are needed as a data will take two,
3123 * and there is a minimum of 2 that must be
3124 * maintained between the r and w indexes
3126 element
= priv
->tx_pend_list
.next
;
3127 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3129 if (unlikely(1 + packet
->info
.d_struct
.txb
->nr_frags
>
3131 /* TODO: Support merging buffers if more than
3132 * IPW_MAX_BDS are used */
3133 IPW_DEBUG_INFO("%s: Maximum BD threshold exceeded. "
3134 "Increase fragmentation level.\n",
3135 priv
->net_dev
->name
);
3138 if (txq
->available
<= 3 + packet
->info
.d_struct
.txb
->nr_frags
) {
3139 IPW_DEBUG_TX("no room in tx_queue\n");
3144 DEC_STAT(&priv
->tx_pend_stat
);
3146 tbd
= &txq
->drv
[txq
->next
];
3148 packet
->index
= txq
->next
;
3150 ipw_hdr
= packet
->info
.d_struct
.data
;
3151 hdr
= (struct libipw_hdr_3addr
*)packet
->info
.d_struct
.txb
->
3154 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
) {
3155 /* To DS: Addr1 = BSSID, Addr2 = SA,
3157 memcpy(ipw_hdr
->src_addr
, hdr
->addr2
, ETH_ALEN
);
3158 memcpy(ipw_hdr
->dst_addr
, hdr
->addr3
, ETH_ALEN
);
3159 } else if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
3160 /* not From/To DS: Addr1 = DA, Addr2 = SA,
3162 memcpy(ipw_hdr
->src_addr
, hdr
->addr2
, ETH_ALEN
);
3163 memcpy(ipw_hdr
->dst_addr
, hdr
->addr1
, ETH_ALEN
);
3166 ipw_hdr
->host_command_reg
= SEND
;
3167 ipw_hdr
->host_command_reg1
= 0;
3169 /* For now we only support host based encryption */
3170 ipw_hdr
->needs_encryption
= 0;
3171 ipw_hdr
->encrypted
= packet
->info
.d_struct
.txb
->encrypted
;
3172 if (packet
->info
.d_struct
.txb
->nr_frags
> 1)
3173 ipw_hdr
->fragment_size
=
3174 packet
->info
.d_struct
.txb
->frag_size
-
3177 ipw_hdr
->fragment_size
= 0;
3179 tbd
->host_addr
= packet
->info
.d_struct
.data_phys
;
3180 tbd
->buf_length
= sizeof(struct ipw2100_data_header
);
3181 tbd
->num_fragments
= 1 + packet
->info
.d_struct
.txb
->nr_frags
;
3182 tbd
->status
.info
.field
=
3183 IPW_BD_STATUS_TX_FRAME_802_3
|
3184 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT
;
3186 txq
->next
%= txq
->entries
;
3188 IPW_DEBUG_TX("data header tbd TX%d P=%08x L=%d\n",
3189 packet
->index
, tbd
->host_addr
, tbd
->buf_length
);
3190 #ifdef CONFIG_IPW2100_DEBUG
3191 if (packet
->info
.d_struct
.txb
->nr_frags
> 1)
3192 IPW_DEBUG_FRAG("fragment Tx: %d frames\n",
3193 packet
->info
.d_struct
.txb
->nr_frags
);
3196 for (i
= 0; i
< packet
->info
.d_struct
.txb
->nr_frags
; i
++) {
3197 tbd
= &txq
->drv
[txq
->next
];
3198 if (i
== packet
->info
.d_struct
.txb
->nr_frags
- 1)
3199 tbd
->status
.info
.field
=
3200 IPW_BD_STATUS_TX_FRAME_802_3
|
3201 IPW_BD_STATUS_TX_INTERRUPT_ENABLE
;
3203 tbd
->status
.info
.field
=
3204 IPW_BD_STATUS_TX_FRAME_802_3
|
3205 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT
;
3207 tbd
->buf_length
= packet
->info
.d_struct
.txb
->
3208 fragments
[i
]->len
- LIBIPW_3ADDR_LEN
;
3210 tbd
->host_addr
= pci_map_single(priv
->pci_dev
,
3211 packet
->info
.d_struct
.
3218 IPW_DEBUG_TX("data frag tbd TX%d P=%08x L=%d\n",
3219 txq
->next
, tbd
->host_addr
,
3222 pci_dma_sync_single_for_device(priv
->pci_dev
,
3228 txq
->next
%= txq
->entries
;
3231 txq
->available
-= 1 + packet
->info
.d_struct
.txb
->nr_frags
;
3232 SET_STAT(&priv
->txq_stat
, txq
->available
);
3234 list_add_tail(element
, &priv
->fw_pend_list
);
3235 INC_STAT(&priv
->fw_pend_stat
);
3238 if (txq
->next
!= next
) {
3239 /* kick off the DMA by notifying firmware the
3240 * write index has moved; make sure TBD stores are sync'd */
3241 write_register(priv
->net_dev
,
3242 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
3247 static void ipw2100_irq_tasklet(struct ipw2100_priv
*priv
)
3249 struct net_device
*dev
= priv
->net_dev
;
3250 unsigned long flags
;
3253 spin_lock_irqsave(&priv
->low_lock
, flags
);
3254 ipw2100_disable_interrupts(priv
);
3256 read_register(dev
, IPW_REG_INTA
, &inta
);
3258 IPW_DEBUG_ISR("enter - INTA: 0x%08lX\n",
3259 (unsigned long)inta
& IPW_INTERRUPT_MASK
);
3264 /* We do not loop and keep polling for more interrupts as this
3265 * is frowned upon and doesn't play nicely with other potentially
3267 IPW_DEBUG_ISR("INTA: 0x%08lX\n",
3268 (unsigned long)inta
& IPW_INTERRUPT_MASK
);
3270 if (inta
& IPW2100_INTA_FATAL_ERROR
) {
3271 printk(KERN_WARNING DRV_NAME
3272 ": Fatal interrupt. Scheduling firmware restart.\n");
3274 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_FATAL_ERROR
);
3276 read_nic_dword(dev
, IPW_NIC_FATAL_ERROR
, &priv
->fatal_error
);
3277 IPW_DEBUG_INFO("%s: Fatal error value: 0x%08X\n",
3278 priv
->net_dev
->name
, priv
->fatal_error
);
3280 read_nic_dword(dev
, IPW_ERROR_ADDR(priv
->fatal_error
), &tmp
);
3281 IPW_DEBUG_INFO("%s: Fatal error address value: 0x%08X\n",
3282 priv
->net_dev
->name
, tmp
);
3284 /* Wake up any sleeping jobs */
3285 schedule_reset(priv
);
3288 if (inta
& IPW2100_INTA_PARITY_ERROR
) {
3289 printk(KERN_ERR DRV_NAME
3290 ": ***** PARITY ERROR INTERRUPT !!!!\n");
3292 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_PARITY_ERROR
);
3295 if (inta
& IPW2100_INTA_RX_TRANSFER
) {
3296 IPW_DEBUG_ISR("RX interrupt\n");
3298 priv
->rx_interrupts
++;
3300 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_RX_TRANSFER
);
3302 __ipw2100_rx_process(priv
);
3303 __ipw2100_tx_complete(priv
);
3306 if (inta
& IPW2100_INTA_TX_TRANSFER
) {
3307 IPW_DEBUG_ISR("TX interrupt\n");
3309 priv
->tx_interrupts
++;
3311 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_TX_TRANSFER
);
3313 __ipw2100_tx_complete(priv
);
3314 ipw2100_tx_send_commands(priv
);
3315 ipw2100_tx_send_data(priv
);
3318 if (inta
& IPW2100_INTA_TX_COMPLETE
) {
3319 IPW_DEBUG_ISR("TX complete\n");
3321 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_TX_COMPLETE
);
3323 __ipw2100_tx_complete(priv
);
3326 if (inta
& IPW2100_INTA_EVENT_INTERRUPT
) {
3327 /* ipw2100_handle_event(dev); */
3329 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_EVENT_INTERRUPT
);
3332 if (inta
& IPW2100_INTA_FW_INIT_DONE
) {
3333 IPW_DEBUG_ISR("FW init done interrupt\n");
3336 read_register(dev
, IPW_REG_INTA
, &tmp
);
3337 if (tmp
& (IPW2100_INTA_FATAL_ERROR
|
3338 IPW2100_INTA_PARITY_ERROR
)) {
3339 write_register(dev
, IPW_REG_INTA
,
3340 IPW2100_INTA_FATAL_ERROR
|
3341 IPW2100_INTA_PARITY_ERROR
);
3344 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_FW_INIT_DONE
);
3347 if (inta
& IPW2100_INTA_STATUS_CHANGE
) {
3348 IPW_DEBUG_ISR("Status change interrupt\n");
3350 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_STATUS_CHANGE
);
3353 if (inta
& IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE
) {
3354 IPW_DEBUG_ISR("slave host mode interrupt\n");
3356 write_register(dev
, IPW_REG_INTA
,
3357 IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE
);
3361 ipw2100_enable_interrupts(priv
);
3363 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3365 IPW_DEBUG_ISR("exit\n");
3368 static irqreturn_t
ipw2100_interrupt(int irq
, void *data
)
3370 struct ipw2100_priv
*priv
= data
;
3371 u32 inta
, inta_mask
;
3376 spin_lock(&priv
->low_lock
);
3378 /* We check to see if we should be ignoring interrupts before
3379 * we touch the hardware. During ucode load if we try and handle
3380 * an interrupt we can cause keyboard problems as well as cause
3381 * the ucode to fail to initialize */
3382 if (!(priv
->status
& STATUS_INT_ENABLED
)) {
3387 read_register(priv
->net_dev
, IPW_REG_INTA_MASK
, &inta_mask
);
3388 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
3390 if (inta
== 0xFFFFFFFF) {
3391 /* Hardware disappeared */
3392 printk(KERN_WARNING DRV_NAME
": IRQ INTA == 0xFFFFFFFF\n");
3396 inta
&= IPW_INTERRUPT_MASK
;
3398 if (!(inta
& inta_mask
)) {
3399 /* Shared interrupt */
3403 /* We disable the hardware interrupt here just to prevent unneeded
3404 * calls to be made. We disable this again within the actual
3405 * work tasklet, so if another part of the code re-enables the
3406 * interrupt, that is fine */
3407 ipw2100_disable_interrupts(priv
);
3409 tasklet_schedule(&priv
->irq_tasklet
);
3410 spin_unlock(&priv
->low_lock
);
3414 spin_unlock(&priv
->low_lock
);
3418 static netdev_tx_t
ipw2100_tx(struct libipw_txb
*txb
,
3419 struct net_device
*dev
, int pri
)
3421 struct ipw2100_priv
*priv
= libipw_priv(dev
);
3422 struct list_head
*element
;
3423 struct ipw2100_tx_packet
*packet
;
3424 unsigned long flags
;
3426 spin_lock_irqsave(&priv
->low_lock
, flags
);
3428 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
3429 IPW_DEBUG_INFO("Can not transmit when not connected.\n");
3430 priv
->net_dev
->stats
.tx_carrier_errors
++;
3431 netif_stop_queue(dev
);
3435 if (list_empty(&priv
->tx_free_list
))
3438 element
= priv
->tx_free_list
.next
;
3439 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3441 packet
->info
.d_struct
.txb
= txb
;
3443 IPW_DEBUG_TX("Sending fragment (%d bytes):\n", txb
->fragments
[0]->len
);
3444 printk_buf(IPW_DL_TX
, txb
->fragments
[0]->data
, txb
->fragments
[0]->len
);
3446 packet
->jiffy_start
= jiffies
;
3449 DEC_STAT(&priv
->tx_free_stat
);
3451 list_add_tail(element
, &priv
->tx_pend_list
);
3452 INC_STAT(&priv
->tx_pend_stat
);
3454 ipw2100_tx_send_data(priv
);
3456 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3457 return NETDEV_TX_OK
;
3460 netif_stop_queue(dev
);
3461 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3462 return NETDEV_TX_BUSY
;
3465 static int ipw2100_msg_allocate(struct ipw2100_priv
*priv
)
3467 int i
, j
, err
= -EINVAL
;
3472 kmalloc(IPW_COMMAND_POOL_SIZE
* sizeof(struct ipw2100_tx_packet
),
3474 if (!priv
->msg_buffers
)
3477 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++) {
3478 v
= pci_alloc_consistent(priv
->pci_dev
,
3479 sizeof(struct ipw2100_cmd_header
), &p
);
3481 printk(KERN_ERR DRV_NAME
": "
3482 "%s: PCI alloc failed for msg "
3483 "buffers.\n", priv
->net_dev
->name
);
3488 memset(v
, 0, sizeof(struct ipw2100_cmd_header
));
3490 priv
->msg_buffers
[i
].type
= COMMAND
;
3491 priv
->msg_buffers
[i
].info
.c_struct
.cmd
=
3492 (struct ipw2100_cmd_header
*)v
;
3493 priv
->msg_buffers
[i
].info
.c_struct
.cmd_phys
= p
;
3496 if (i
== IPW_COMMAND_POOL_SIZE
)
3499 for (j
= 0; j
< i
; j
++) {
3500 pci_free_consistent(priv
->pci_dev
,
3501 sizeof(struct ipw2100_cmd_header
),
3502 priv
->msg_buffers
[j
].info
.c_struct
.cmd
,
3503 priv
->msg_buffers
[j
].info
.c_struct
.
3507 kfree(priv
->msg_buffers
);
3508 priv
->msg_buffers
= NULL
;
3513 static int ipw2100_msg_initialize(struct ipw2100_priv
*priv
)
3517 INIT_LIST_HEAD(&priv
->msg_free_list
);
3518 INIT_LIST_HEAD(&priv
->msg_pend_list
);
3520 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++)
3521 list_add_tail(&priv
->msg_buffers
[i
].list
, &priv
->msg_free_list
);
3522 SET_STAT(&priv
->msg_free_stat
, i
);
3527 static void ipw2100_msg_free(struct ipw2100_priv
*priv
)
3531 if (!priv
->msg_buffers
)
3534 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++) {
3535 pci_free_consistent(priv
->pci_dev
,
3536 sizeof(struct ipw2100_cmd_header
),
3537 priv
->msg_buffers
[i
].info
.c_struct
.cmd
,
3538 priv
->msg_buffers
[i
].info
.c_struct
.
3542 kfree(priv
->msg_buffers
);
3543 priv
->msg_buffers
= NULL
;
3546 static ssize_t
show_pci(struct device
*d
, struct device_attribute
*attr
,
3549 struct pci_dev
*pci_dev
= container_of(d
, struct pci_dev
, dev
);
3554 for (i
= 0; i
< 16; i
++) {
3555 out
+= sprintf(out
, "[%08X] ", i
* 16);
3556 for (j
= 0; j
< 16; j
+= 4) {
3557 pci_read_config_dword(pci_dev
, i
* 16 + j
, &val
);
3558 out
+= sprintf(out
, "%08X ", val
);
3560 out
+= sprintf(out
, "\n");
3566 static DEVICE_ATTR(pci
, S_IRUGO
, show_pci
, NULL
);
3568 static ssize_t
show_cfg(struct device
*d
, struct device_attribute
*attr
,
3571 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3572 return sprintf(buf
, "0x%08x\n", (int)p
->config
);
3575 static DEVICE_ATTR(cfg
, S_IRUGO
, show_cfg
, NULL
);
3577 static ssize_t
show_status(struct device
*d
, struct device_attribute
*attr
,
3580 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3581 return sprintf(buf
, "0x%08x\n", (int)p
->status
);
3584 static DEVICE_ATTR(status
, S_IRUGO
, show_status
, NULL
);
3586 static ssize_t
show_capability(struct device
*d
, struct device_attribute
*attr
,
3589 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3590 return sprintf(buf
, "0x%08x\n", (int)p
->capability
);
3593 static DEVICE_ATTR(capability
, S_IRUGO
, show_capability
, NULL
);
3595 #define IPW2100_REG(x) { IPW_ ##x, #x }
3596 static const struct {
3600 IPW2100_REG(REG_GP_CNTRL
),
3601 IPW2100_REG(REG_GPIO
),
3602 IPW2100_REG(REG_INTA
),
3603 IPW2100_REG(REG_INTA_MASK
), IPW2100_REG(REG_RESET_REG
),};
3604 #define IPW2100_NIC(x, s) { x, #x, s }
3605 static const struct {
3610 IPW2100_NIC(IPW2100_CONTROL_REG
, 2),
3611 IPW2100_NIC(0x210014, 1), IPW2100_NIC(0x210000, 1),};
3612 #define IPW2100_ORD(x, d) { IPW_ORD_ ##x, #x, d }
3613 static const struct {
3618 IPW2100_ORD(STAT_TX_HOST_REQUESTS
, "requested Host Tx's (MSDU)"),
3619 IPW2100_ORD(STAT_TX_HOST_COMPLETE
,
3620 "successful Host Tx's (MSDU)"),
3621 IPW2100_ORD(STAT_TX_DIR_DATA
,
3622 "successful Directed Tx's (MSDU)"),
3623 IPW2100_ORD(STAT_TX_DIR_DATA1
,
3624 "successful Directed Tx's (MSDU) @ 1MB"),
3625 IPW2100_ORD(STAT_TX_DIR_DATA2
,
3626 "successful Directed Tx's (MSDU) @ 2MB"),
3627 IPW2100_ORD(STAT_TX_DIR_DATA5_5
,
3628 "successful Directed Tx's (MSDU) @ 5_5MB"),
3629 IPW2100_ORD(STAT_TX_DIR_DATA11
,
3630 "successful Directed Tx's (MSDU) @ 11MB"),
3631 IPW2100_ORD(STAT_TX_NODIR_DATA1
,
3632 "successful Non_Directed Tx's (MSDU) @ 1MB"),
3633 IPW2100_ORD(STAT_TX_NODIR_DATA2
,
3634 "successful Non_Directed Tx's (MSDU) @ 2MB"),
3635 IPW2100_ORD(STAT_TX_NODIR_DATA5_5
,
3636 "successful Non_Directed Tx's (MSDU) @ 5.5MB"),
3637 IPW2100_ORD(STAT_TX_NODIR_DATA11
,
3638 "successful Non_Directed Tx's (MSDU) @ 11MB"),
3639 IPW2100_ORD(STAT_NULL_DATA
, "successful NULL data Tx's"),
3640 IPW2100_ORD(STAT_TX_RTS
, "successful Tx RTS"),
3641 IPW2100_ORD(STAT_TX_CTS
, "successful Tx CTS"),
3642 IPW2100_ORD(STAT_TX_ACK
, "successful Tx ACK"),
3643 IPW2100_ORD(STAT_TX_ASSN
, "successful Association Tx's"),
3644 IPW2100_ORD(STAT_TX_ASSN_RESP
,
3645 "successful Association response Tx's"),
3646 IPW2100_ORD(STAT_TX_REASSN
,
3647 "successful Reassociation Tx's"),
3648 IPW2100_ORD(STAT_TX_REASSN_RESP
,
3649 "successful Reassociation response Tx's"),
3650 IPW2100_ORD(STAT_TX_PROBE
,
3651 "probes successfully transmitted"),
3652 IPW2100_ORD(STAT_TX_PROBE_RESP
,
3653 "probe responses successfully transmitted"),
3654 IPW2100_ORD(STAT_TX_BEACON
, "tx beacon"),
3655 IPW2100_ORD(STAT_TX_ATIM
, "Tx ATIM"),
3656 IPW2100_ORD(STAT_TX_DISASSN
,
3657 "successful Disassociation TX"),
3658 IPW2100_ORD(STAT_TX_AUTH
, "successful Authentication Tx"),
3659 IPW2100_ORD(STAT_TX_DEAUTH
,
3660 "successful Deauthentication TX"),
3661 IPW2100_ORD(STAT_TX_TOTAL_BYTES
,
3662 "Total successful Tx data bytes"),
3663 IPW2100_ORD(STAT_TX_RETRIES
, "Tx retries"),
3664 IPW2100_ORD(STAT_TX_RETRY1
, "Tx retries at 1MBPS"),
3665 IPW2100_ORD(STAT_TX_RETRY2
, "Tx retries at 2MBPS"),
3666 IPW2100_ORD(STAT_TX_RETRY5_5
, "Tx retries at 5.5MBPS"),
3667 IPW2100_ORD(STAT_TX_RETRY11
, "Tx retries at 11MBPS"),
3668 IPW2100_ORD(STAT_TX_FAILURES
, "Tx Failures"),
3669 IPW2100_ORD(STAT_TX_MAX_TRIES_IN_HOP
,
3670 "times max tries in a hop failed"),
3671 IPW2100_ORD(STAT_TX_DISASSN_FAIL
,
3672 "times disassociation failed"),
3673 IPW2100_ORD(STAT_TX_ERR_CTS
, "missed/bad CTS frames"),
3674 IPW2100_ORD(STAT_TX_ERR_ACK
, "tx err due to acks"),
3675 IPW2100_ORD(STAT_RX_HOST
, "packets passed to host"),
3676 IPW2100_ORD(STAT_RX_DIR_DATA
, "directed packets"),
3677 IPW2100_ORD(STAT_RX_DIR_DATA1
, "directed packets at 1MB"),
3678 IPW2100_ORD(STAT_RX_DIR_DATA2
, "directed packets at 2MB"),
3679 IPW2100_ORD(STAT_RX_DIR_DATA5_5
,
3680 "directed packets at 5.5MB"),
3681 IPW2100_ORD(STAT_RX_DIR_DATA11
, "directed packets at 11MB"),
3682 IPW2100_ORD(STAT_RX_NODIR_DATA
, "nondirected packets"),
3683 IPW2100_ORD(STAT_RX_NODIR_DATA1
,
3684 "nondirected packets at 1MB"),
3685 IPW2100_ORD(STAT_RX_NODIR_DATA2
,
3686 "nondirected packets at 2MB"),
3687 IPW2100_ORD(STAT_RX_NODIR_DATA5_5
,
3688 "nondirected packets at 5.5MB"),
3689 IPW2100_ORD(STAT_RX_NODIR_DATA11
,
3690 "nondirected packets at 11MB"),
3691 IPW2100_ORD(STAT_RX_NULL_DATA
, "null data rx's"),
3692 IPW2100_ORD(STAT_RX_RTS
, "Rx RTS"), IPW2100_ORD(STAT_RX_CTS
,
3694 IPW2100_ORD(STAT_RX_ACK
, "Rx ACK"),
3695 IPW2100_ORD(STAT_RX_CFEND
, "Rx CF End"),
3696 IPW2100_ORD(STAT_RX_CFEND_ACK
, "Rx CF End + CF Ack"),
3697 IPW2100_ORD(STAT_RX_ASSN
, "Association Rx's"),
3698 IPW2100_ORD(STAT_RX_ASSN_RESP
, "Association response Rx's"),
3699 IPW2100_ORD(STAT_RX_REASSN
, "Reassociation Rx's"),
3700 IPW2100_ORD(STAT_RX_REASSN_RESP
,
3701 "Reassociation response Rx's"),
3702 IPW2100_ORD(STAT_RX_PROBE
, "probe Rx's"),
3703 IPW2100_ORD(STAT_RX_PROBE_RESP
, "probe response Rx's"),
3704 IPW2100_ORD(STAT_RX_BEACON
, "Rx beacon"),
3705 IPW2100_ORD(STAT_RX_ATIM
, "Rx ATIM"),
3706 IPW2100_ORD(STAT_RX_DISASSN
, "disassociation Rx"),
3707 IPW2100_ORD(STAT_RX_AUTH
, "authentication Rx"),
3708 IPW2100_ORD(STAT_RX_DEAUTH
, "deauthentication Rx"),
3709 IPW2100_ORD(STAT_RX_TOTAL_BYTES
,
3710 "Total rx data bytes received"),
3711 IPW2100_ORD(STAT_RX_ERR_CRC
, "packets with Rx CRC error"),
3712 IPW2100_ORD(STAT_RX_ERR_CRC1
, "Rx CRC errors at 1MB"),
3713 IPW2100_ORD(STAT_RX_ERR_CRC2
, "Rx CRC errors at 2MB"),
3714 IPW2100_ORD(STAT_RX_ERR_CRC5_5
, "Rx CRC errors at 5.5MB"),
3715 IPW2100_ORD(STAT_RX_ERR_CRC11
, "Rx CRC errors at 11MB"),
3716 IPW2100_ORD(STAT_RX_DUPLICATE1
,
3717 "duplicate rx packets at 1MB"),
3718 IPW2100_ORD(STAT_RX_DUPLICATE2
,
3719 "duplicate rx packets at 2MB"),
3720 IPW2100_ORD(STAT_RX_DUPLICATE5_5
,
3721 "duplicate rx packets at 5.5MB"),
3722 IPW2100_ORD(STAT_RX_DUPLICATE11
,
3723 "duplicate rx packets at 11MB"),
3724 IPW2100_ORD(STAT_RX_DUPLICATE
, "duplicate rx packets"),
3725 IPW2100_ORD(PERS_DB_LOCK
, "locking fw permanent db"),
3726 IPW2100_ORD(PERS_DB_SIZE
, "size of fw permanent db"),
3727 IPW2100_ORD(PERS_DB_ADDR
, "address of fw permanent db"),
3728 IPW2100_ORD(STAT_RX_INVALID_PROTOCOL
,
3729 "rx frames with invalid protocol"),
3730 IPW2100_ORD(SYS_BOOT_TIME
, "Boot time"),
3731 IPW2100_ORD(STAT_RX_NO_BUFFER
,
3732 "rx frames rejected due to no buffer"),
3733 IPW2100_ORD(STAT_RX_MISSING_FRAG
,
3734 "rx frames dropped due to missing fragment"),
3735 IPW2100_ORD(STAT_RX_ORPHAN_FRAG
,
3736 "rx frames dropped due to non-sequential fragment"),
3737 IPW2100_ORD(STAT_RX_ORPHAN_FRAME
,
3738 "rx frames dropped due to unmatched 1st frame"),
3739 IPW2100_ORD(STAT_RX_FRAG_AGEOUT
,
3740 "rx frames dropped due to uncompleted frame"),
3741 IPW2100_ORD(STAT_RX_ICV_ERRORS
,
3742 "ICV errors during decryption"),
3743 IPW2100_ORD(STAT_PSP_SUSPENSION
, "times adapter suspended"),
3744 IPW2100_ORD(STAT_PSP_BCN_TIMEOUT
, "beacon timeout"),
3745 IPW2100_ORD(STAT_PSP_POLL_TIMEOUT
,
3746 "poll response timeouts"),
3747 IPW2100_ORD(STAT_PSP_NONDIR_TIMEOUT
,
3748 "timeouts waiting for last {broad,multi}cast pkt"),
3749 IPW2100_ORD(STAT_PSP_RX_DTIMS
, "PSP DTIMs received"),
3750 IPW2100_ORD(STAT_PSP_RX_TIMS
, "PSP TIMs received"),
3751 IPW2100_ORD(STAT_PSP_STATION_ID
, "PSP Station ID"),
3752 IPW2100_ORD(LAST_ASSN_TIME
, "RTC time of last association"),
3753 IPW2100_ORD(STAT_PERCENT_MISSED_BCNS
,
3754 "current calculation of % missed beacons"),
3755 IPW2100_ORD(STAT_PERCENT_RETRIES
,
3756 "current calculation of % missed tx retries"),
3757 IPW2100_ORD(ASSOCIATED_AP_PTR
,
3758 "0 if not associated, else pointer to AP table entry"),
3759 IPW2100_ORD(AVAILABLE_AP_CNT
,
3760 "AP's decsribed in the AP table"),
3761 IPW2100_ORD(AP_LIST_PTR
, "Ptr to list of available APs"),
3762 IPW2100_ORD(STAT_AP_ASSNS
, "associations"),
3763 IPW2100_ORD(STAT_ASSN_FAIL
, "association failures"),
3764 IPW2100_ORD(STAT_ASSN_RESP_FAIL
,
3765 "failures due to response fail"),
3766 IPW2100_ORD(STAT_FULL_SCANS
, "full scans"),
3767 IPW2100_ORD(CARD_DISABLED
, "Card Disabled"),
3768 IPW2100_ORD(STAT_ROAM_INHIBIT
,
3769 "times roaming was inhibited due to activity"),
3770 IPW2100_ORD(RSSI_AT_ASSN
,
3771 "RSSI of associated AP at time of association"),
3772 IPW2100_ORD(STAT_ASSN_CAUSE1
,
3773 "reassociation: no probe response or TX on hop"),
3774 IPW2100_ORD(STAT_ASSN_CAUSE2
,
3775 "reassociation: poor tx/rx quality"),
3776 IPW2100_ORD(STAT_ASSN_CAUSE3
,
3777 "reassociation: tx/rx quality (excessive AP load"),
3778 IPW2100_ORD(STAT_ASSN_CAUSE4
,
3779 "reassociation: AP RSSI level"),
3780 IPW2100_ORD(STAT_ASSN_CAUSE5
,
3781 "reassociations due to load leveling"),
3782 IPW2100_ORD(STAT_AUTH_FAIL
, "times authentication failed"),
3783 IPW2100_ORD(STAT_AUTH_RESP_FAIL
,
3784 "times authentication response failed"),
3785 IPW2100_ORD(STATION_TABLE_CNT
,
3786 "entries in association table"),
3787 IPW2100_ORD(RSSI_AVG_CURR
, "Current avg RSSI"),
3788 IPW2100_ORD(POWER_MGMT_MODE
, "Power mode - 0=CAM, 1=PSP"),
3789 IPW2100_ORD(COUNTRY_CODE
,
3790 "IEEE country code as recv'd from beacon"),
3791 IPW2100_ORD(COUNTRY_CHANNELS
,
3792 "channels supported by country"),
3793 IPW2100_ORD(RESET_CNT
, "adapter resets (warm)"),
3794 IPW2100_ORD(BEACON_INTERVAL
, "Beacon interval"),
3795 IPW2100_ORD(ANTENNA_DIVERSITY
,
3796 "TRUE if antenna diversity is disabled"),
3797 IPW2100_ORD(DTIM_PERIOD
, "beacon intervals between DTIMs"),
3798 IPW2100_ORD(OUR_FREQ
,
3799 "current radio freq lower digits - channel ID"),
3800 IPW2100_ORD(RTC_TIME
, "current RTC time"),
3801 IPW2100_ORD(PORT_TYPE
, "operating mode"),
3802 IPW2100_ORD(CURRENT_TX_RATE
, "current tx rate"),
3803 IPW2100_ORD(SUPPORTED_RATES
, "supported tx rates"),
3804 IPW2100_ORD(ATIM_WINDOW
, "current ATIM Window"),
3805 IPW2100_ORD(BASIC_RATES
, "basic tx rates"),
3806 IPW2100_ORD(NIC_HIGHEST_RATE
, "NIC highest tx rate"),
3807 IPW2100_ORD(AP_HIGHEST_RATE
, "AP highest tx rate"),
3808 IPW2100_ORD(CAPABILITIES
,
3809 "Management frame capability field"),
3810 IPW2100_ORD(AUTH_TYPE
, "Type of authentication"),
3811 IPW2100_ORD(RADIO_TYPE
, "Adapter card platform type"),
3812 IPW2100_ORD(RTS_THRESHOLD
,
3813 "Min packet length for RTS handshaking"),
3814 IPW2100_ORD(INT_MODE
, "International mode"),
3815 IPW2100_ORD(FRAGMENTATION_THRESHOLD
,
3816 "protocol frag threshold"),
3817 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_START_ADDRESS
,
3818 "EEPROM offset in SRAM"),
3819 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_SIZE
,
3820 "EEPROM size in SRAM"),
3821 IPW2100_ORD(EEPROM_SKU_CAPABILITY
, "EEPROM SKU Capability"),
3822 IPW2100_ORD(EEPROM_IBSS_11B_CHANNELS
,
3823 "EEPROM IBSS 11b channel set"),
3824 IPW2100_ORD(MAC_VERSION
, "MAC Version"),
3825 IPW2100_ORD(MAC_REVISION
, "MAC Revision"),
3826 IPW2100_ORD(RADIO_VERSION
, "Radio Version"),
3827 IPW2100_ORD(NIC_MANF_DATE_TIME
, "MANF Date/Time STAMP"),
3828 IPW2100_ORD(UCODE_VERSION
, "Ucode Version"),};
3830 static ssize_t
show_registers(struct device
*d
, struct device_attribute
*attr
,
3834 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3835 struct net_device
*dev
= priv
->net_dev
;
3839 out
+= sprintf(out
, "%30s [Address ] : Hex\n", "Register");
3841 for (i
= 0; i
< ARRAY_SIZE(hw_data
); i
++) {
3842 read_register(dev
, hw_data
[i
].addr
, &val
);
3843 out
+= sprintf(out
, "%30s [%08X] : %08X\n",
3844 hw_data
[i
].name
, hw_data
[i
].addr
, val
);
3850 static DEVICE_ATTR(registers
, S_IRUGO
, show_registers
, NULL
);
3852 static ssize_t
show_hardware(struct device
*d
, struct device_attribute
*attr
,
3855 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3856 struct net_device
*dev
= priv
->net_dev
;
3860 out
+= sprintf(out
, "%30s [Address ] : Hex\n", "NIC entry");
3862 for (i
= 0; i
< ARRAY_SIZE(nic_data
); i
++) {
3867 switch (nic_data
[i
].size
) {
3869 read_nic_byte(dev
, nic_data
[i
].addr
, &tmp8
);
3870 out
+= sprintf(out
, "%30s [%08X] : %02X\n",
3871 nic_data
[i
].name
, nic_data
[i
].addr
,
3875 read_nic_word(dev
, nic_data
[i
].addr
, &tmp16
);
3876 out
+= sprintf(out
, "%30s [%08X] : %04X\n",
3877 nic_data
[i
].name
, nic_data
[i
].addr
,
3881 read_nic_dword(dev
, nic_data
[i
].addr
, &tmp32
);
3882 out
+= sprintf(out
, "%30s [%08X] : %08X\n",
3883 nic_data
[i
].name
, nic_data
[i
].addr
,
3891 static DEVICE_ATTR(hardware
, S_IRUGO
, show_hardware
, NULL
);
3893 static ssize_t
show_memory(struct device
*d
, struct device_attribute
*attr
,
3896 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3897 struct net_device
*dev
= priv
->net_dev
;
3898 static unsigned long loop
= 0;
3904 if (loop
>= 0x30000)
3907 /* sysfs provides us PAGE_SIZE buffer */
3908 while (len
< PAGE_SIZE
- 128 && loop
< 0x30000) {
3910 if (priv
->snapshot
[0])
3911 for (i
= 0; i
< 4; i
++)
3913 *(u32
*) SNAPSHOT_ADDR(loop
+ i
* 4);
3915 for (i
= 0; i
< 4; i
++)
3916 read_nic_dword(dev
, loop
+ i
* 4, &buffer
[i
]);
3919 len
+= sprintf(buf
+ len
,
3924 ((u8
*) buffer
)[0x0],
3925 ((u8
*) buffer
)[0x1],
3926 ((u8
*) buffer
)[0x2],
3927 ((u8
*) buffer
)[0x3],
3928 ((u8
*) buffer
)[0x4],
3929 ((u8
*) buffer
)[0x5],
3930 ((u8
*) buffer
)[0x6],
3931 ((u8
*) buffer
)[0x7],
3932 ((u8
*) buffer
)[0x8],
3933 ((u8
*) buffer
)[0x9],
3934 ((u8
*) buffer
)[0xa],
3935 ((u8
*) buffer
)[0xb],
3936 ((u8
*) buffer
)[0xc],
3937 ((u8
*) buffer
)[0xd],
3938 ((u8
*) buffer
)[0xe],
3939 ((u8
*) buffer
)[0xf]);
3941 len
+= sprintf(buf
+ len
, "%s\n",
3942 snprint_line(line
, sizeof(line
),
3943 (u8
*) buffer
, 16, loop
));
3950 static ssize_t
store_memory(struct device
*d
, struct device_attribute
*attr
,
3951 const char *buf
, size_t count
)
3953 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3954 struct net_device
*dev
= priv
->net_dev
;
3955 const char *p
= buf
;
3957 (void)dev
; /* kill unused-var warning for debug-only code */
3963 (count
>= 2 && tolower(p
[0]) == 'o' && tolower(p
[1]) == 'n')) {
3964 IPW_DEBUG_INFO("%s: Setting memory dump to RAW mode.\n",
3968 } else if (p
[0] == '0' || (count
>= 2 && tolower(p
[0]) == 'o' &&
3969 tolower(p
[1]) == 'f')) {
3970 IPW_DEBUG_INFO("%s: Setting memory dump to HEX mode.\n",
3974 } else if (tolower(p
[0]) == 'r') {
3975 IPW_DEBUG_INFO("%s: Resetting firmware snapshot.\n", dev
->name
);
3976 ipw2100_snapshot_free(priv
);
3979 IPW_DEBUG_INFO("%s: Usage: 0|on = HEX, 1|off = RAW, "
3980 "reset = clear memory snapshot\n", dev
->name
);
3985 static DEVICE_ATTR(memory
, S_IWUSR
| S_IRUGO
, show_memory
, store_memory
);
3987 static ssize_t
show_ordinals(struct device
*d
, struct device_attribute
*attr
,
3990 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3994 static int loop
= 0;
3996 if (priv
->status
& STATUS_RF_KILL_MASK
)
3999 if (loop
>= ARRAY_SIZE(ord_data
))
4002 /* sysfs provides us PAGE_SIZE buffer */
4003 while (len
< PAGE_SIZE
- 128 && loop
< ARRAY_SIZE(ord_data
)) {
4004 val_len
= sizeof(u32
);
4006 if (ipw2100_get_ordinal(priv
, ord_data
[loop
].index
, &val
,
4008 len
+= sprintf(buf
+ len
, "[0x%02X] = ERROR %s\n",
4009 ord_data
[loop
].index
,
4010 ord_data
[loop
].desc
);
4012 len
+= sprintf(buf
+ len
, "[0x%02X] = 0x%08X %s\n",
4013 ord_data
[loop
].index
, val
,
4014 ord_data
[loop
].desc
);
4021 static DEVICE_ATTR(ordinals
, S_IRUGO
, show_ordinals
, NULL
);
4023 static ssize_t
show_stats(struct device
*d
, struct device_attribute
*attr
,
4026 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4029 out
+= sprintf(out
, "interrupts: %d {tx: %d, rx: %d, other: %d}\n",
4030 priv
->interrupts
, priv
->tx_interrupts
,
4031 priv
->rx_interrupts
, priv
->inta_other
);
4032 out
+= sprintf(out
, "firmware resets: %d\n", priv
->resets
);
4033 out
+= sprintf(out
, "firmware hangs: %d\n", priv
->hangs
);
4034 #ifdef CONFIG_IPW2100_DEBUG
4035 out
+= sprintf(out
, "packet mismatch image: %s\n",
4036 priv
->snapshot
[0] ? "YES" : "NO");
4042 static DEVICE_ATTR(stats
, S_IRUGO
, show_stats
, NULL
);
4044 static int ipw2100_switch_mode(struct ipw2100_priv
*priv
, u32 mode
)
4048 if (mode
== priv
->ieee
->iw_mode
)
4051 err
= ipw2100_disable_adapter(priv
);
4053 printk(KERN_ERR DRV_NAME
": %s: Could not disable adapter %d\n",
4054 priv
->net_dev
->name
, err
);
4060 priv
->net_dev
->type
= ARPHRD_ETHER
;
4063 priv
->net_dev
->type
= ARPHRD_ETHER
;
4065 #ifdef CONFIG_IPW2100_MONITOR
4066 case IW_MODE_MONITOR
:
4067 priv
->last_mode
= priv
->ieee
->iw_mode
;
4068 priv
->net_dev
->type
= ARPHRD_IEEE80211_RADIOTAP
;
4070 #endif /* CONFIG_IPW2100_MONITOR */
4073 priv
->ieee
->iw_mode
= mode
;
4076 /* Indicate ipw2100_download_firmware download firmware
4077 * from disk instead of memory. */
4078 ipw2100_firmware
.version
= 0;
4081 printk(KERN_INFO
"%s: Resetting on mode change.\n", priv
->net_dev
->name
);
4082 priv
->reset_backoff
= 0;
4083 schedule_reset(priv
);
4088 static ssize_t
show_internals(struct device
*d
, struct device_attribute
*attr
,
4091 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4094 #define DUMP_VAR(x,y) len += sprintf(buf + len, # x ": %" y "\n", priv-> x)
4096 if (priv
->status
& STATUS_ASSOCIATED
)
4097 len
+= sprintf(buf
+ len
, "connected: %lu\n",
4098 get_seconds() - priv
->connect_start
);
4100 len
+= sprintf(buf
+ len
, "not connected\n");
4102 DUMP_VAR(ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
], "p");
4103 DUMP_VAR(status
, "08lx");
4104 DUMP_VAR(config
, "08lx");
4105 DUMP_VAR(capability
, "08lx");
4108 sprintf(buf
+ len
, "last_rtc: %lu\n",
4109 (unsigned long)priv
->last_rtc
);
4111 DUMP_VAR(fatal_error
, "d");
4112 DUMP_VAR(stop_hang_check
, "d");
4113 DUMP_VAR(stop_rf_kill
, "d");
4114 DUMP_VAR(messages_sent
, "d");
4116 DUMP_VAR(tx_pend_stat
.value
, "d");
4117 DUMP_VAR(tx_pend_stat
.hi
, "d");
4119 DUMP_VAR(tx_free_stat
.value
, "d");
4120 DUMP_VAR(tx_free_stat
.lo
, "d");
4122 DUMP_VAR(msg_free_stat
.value
, "d");
4123 DUMP_VAR(msg_free_stat
.lo
, "d");
4125 DUMP_VAR(msg_pend_stat
.value
, "d");
4126 DUMP_VAR(msg_pend_stat
.hi
, "d");
4128 DUMP_VAR(fw_pend_stat
.value
, "d");
4129 DUMP_VAR(fw_pend_stat
.hi
, "d");
4131 DUMP_VAR(txq_stat
.value
, "d");
4132 DUMP_VAR(txq_stat
.lo
, "d");
4134 DUMP_VAR(ieee
->scans
, "d");
4135 DUMP_VAR(reset_backoff
, "d");
4140 static DEVICE_ATTR(internals
, S_IRUGO
, show_internals
, NULL
);
4142 static ssize_t
show_bssinfo(struct device
*d
, struct device_attribute
*attr
,
4145 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4146 char essid
[IW_ESSID_MAX_SIZE
+ 1];
4150 unsigned int length
;
4153 if (priv
->status
& STATUS_RF_KILL_MASK
)
4156 memset(essid
, 0, sizeof(essid
));
4157 memset(bssid
, 0, sizeof(bssid
));
4159 length
= IW_ESSID_MAX_SIZE
;
4160 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_SSID
, essid
, &length
);
4162 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4165 length
= sizeof(bssid
);
4166 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
,
4169 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4172 length
= sizeof(u32
);
4173 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_OUR_FREQ
, &chan
, &length
);
4175 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4178 out
+= sprintf(out
, "ESSID: %s\n", essid
);
4179 out
+= sprintf(out
, "BSSID: %pM\n", bssid
);
4180 out
+= sprintf(out
, "Channel: %d\n", chan
);
4185 static DEVICE_ATTR(bssinfo
, S_IRUGO
, show_bssinfo
, NULL
);
4187 #ifdef CONFIG_IPW2100_DEBUG
4188 static ssize_t
show_debug_level(struct device_driver
*d
, char *buf
)
4190 return sprintf(buf
, "0x%08X\n", ipw2100_debug_level
);
4193 static ssize_t
store_debug_level(struct device_driver
*d
,
4194 const char *buf
, size_t count
)
4196 char *p
= (char *)buf
;
4199 if (p
[1] == 'x' || p
[1] == 'X' || p
[0] == 'x' || p
[0] == 'X') {
4201 if (p
[0] == 'x' || p
[0] == 'X')
4203 val
= simple_strtoul(p
, &p
, 16);
4205 val
= simple_strtoul(p
, &p
, 10);
4207 IPW_DEBUG_INFO(": %s is not in hex or decimal form.\n", buf
);
4209 ipw2100_debug_level
= val
;
4211 return strnlen(buf
, count
);
4214 static DRIVER_ATTR(debug_level
, S_IWUSR
| S_IRUGO
, show_debug_level
,
4216 #endif /* CONFIG_IPW2100_DEBUG */
4218 static ssize_t
show_fatal_error(struct device
*d
,
4219 struct device_attribute
*attr
, char *buf
)
4221 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4225 if (priv
->fatal_error
)
4226 out
+= sprintf(out
, "0x%08X\n", priv
->fatal_error
);
4228 out
+= sprintf(out
, "0\n");
4230 for (i
= 1; i
<= IPW2100_ERROR_QUEUE
; i
++) {
4231 if (!priv
->fatal_errors
[(priv
->fatal_index
- i
) %
4232 IPW2100_ERROR_QUEUE
])
4235 out
+= sprintf(out
, "%d. 0x%08X\n", i
,
4236 priv
->fatal_errors
[(priv
->fatal_index
- i
) %
4237 IPW2100_ERROR_QUEUE
]);
4243 static ssize_t
store_fatal_error(struct device
*d
,
4244 struct device_attribute
*attr
, const char *buf
,
4247 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4248 schedule_reset(priv
);
4252 static DEVICE_ATTR(fatal_error
, S_IWUSR
| S_IRUGO
, show_fatal_error
,
4255 static ssize_t
show_scan_age(struct device
*d
, struct device_attribute
*attr
,
4258 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4259 return sprintf(buf
, "%d\n", priv
->ieee
->scan_age
);
4262 static ssize_t
store_scan_age(struct device
*d
, struct device_attribute
*attr
,
4263 const char *buf
, size_t count
)
4265 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4266 struct net_device
*dev
= priv
->net_dev
;
4267 char buffer
[] = "00000000";
4269 (sizeof(buffer
) - 1) > count
? count
: sizeof(buffer
) - 1;
4273 (void)dev
; /* kill unused-var warning for debug-only code */
4275 IPW_DEBUG_INFO("enter\n");
4277 strncpy(buffer
, buf
, len
);
4280 if (p
[1] == 'x' || p
[1] == 'X' || p
[0] == 'x' || p
[0] == 'X') {
4282 if (p
[0] == 'x' || p
[0] == 'X')
4284 val
= simple_strtoul(p
, &p
, 16);
4286 val
= simple_strtoul(p
, &p
, 10);
4288 IPW_DEBUG_INFO("%s: user supplied invalid value.\n", dev
->name
);
4290 priv
->ieee
->scan_age
= val
;
4291 IPW_DEBUG_INFO("set scan_age = %u\n", priv
->ieee
->scan_age
);
4294 IPW_DEBUG_INFO("exit\n");
4298 static DEVICE_ATTR(scan_age
, S_IWUSR
| S_IRUGO
, show_scan_age
, store_scan_age
);
4300 static ssize_t
show_rf_kill(struct device
*d
, struct device_attribute
*attr
,
4303 /* 0 - RF kill not enabled
4304 1 - SW based RF kill active (sysfs)
4305 2 - HW based RF kill active
4306 3 - Both HW and SW baed RF kill active */
4307 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4308 int val
= ((priv
->status
& STATUS_RF_KILL_SW
) ? 0x1 : 0x0) |
4309 (rf_kill_active(priv
) ? 0x2 : 0x0);
4310 return sprintf(buf
, "%i\n", val
);
4313 static int ipw_radio_kill_sw(struct ipw2100_priv
*priv
, int disable_radio
)
4315 if ((disable_radio
? 1 : 0) ==
4316 (priv
->status
& STATUS_RF_KILL_SW
? 1 : 0))
4319 IPW_DEBUG_RF_KILL("Manual SW RF Kill set to: RADIO %s\n",
4320 disable_radio
? "OFF" : "ON");
4322 mutex_lock(&priv
->action_mutex
);
4324 if (disable_radio
) {
4325 priv
->status
|= STATUS_RF_KILL_SW
;
4328 priv
->status
&= ~STATUS_RF_KILL_SW
;
4329 if (rf_kill_active(priv
)) {
4330 IPW_DEBUG_RF_KILL("Can not turn radio back on - "
4331 "disabled by HW switch\n");
4332 /* Make sure the RF_KILL check timer is running */
4333 priv
->stop_rf_kill
= 0;
4334 cancel_delayed_work(&priv
->rf_kill
);
4335 schedule_delayed_work(&priv
->rf_kill
,
4336 round_jiffies_relative(HZ
));
4338 schedule_reset(priv
);
4341 mutex_unlock(&priv
->action_mutex
);
4345 static ssize_t
store_rf_kill(struct device
*d
, struct device_attribute
*attr
,
4346 const char *buf
, size_t count
)
4348 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4349 ipw_radio_kill_sw(priv
, buf
[0] == '1');
4353 static DEVICE_ATTR(rf_kill
, S_IWUSR
| S_IRUGO
, show_rf_kill
, store_rf_kill
);
4355 static struct attribute
*ipw2100_sysfs_entries
[] = {
4356 &dev_attr_hardware
.attr
,
4357 &dev_attr_registers
.attr
,
4358 &dev_attr_ordinals
.attr
,
4360 &dev_attr_stats
.attr
,
4361 &dev_attr_internals
.attr
,
4362 &dev_attr_bssinfo
.attr
,
4363 &dev_attr_memory
.attr
,
4364 &dev_attr_scan_age
.attr
,
4365 &dev_attr_fatal_error
.attr
,
4366 &dev_attr_rf_kill
.attr
,
4368 &dev_attr_status
.attr
,
4369 &dev_attr_capability
.attr
,
4373 static struct attribute_group ipw2100_attribute_group
= {
4374 .attrs
= ipw2100_sysfs_entries
,
4377 static int status_queue_allocate(struct ipw2100_priv
*priv
, int entries
)
4379 struct ipw2100_status_queue
*q
= &priv
->status_queue
;
4381 IPW_DEBUG_INFO("enter\n");
4383 q
->size
= entries
* sizeof(struct ipw2100_status
);
4385 (struct ipw2100_status
*)pci_alloc_consistent(priv
->pci_dev
,
4388 IPW_DEBUG_WARNING("Can not allocate status queue.\n");
4392 memset(q
->drv
, 0, q
->size
);
4394 IPW_DEBUG_INFO("exit\n");
4399 static void status_queue_free(struct ipw2100_priv
*priv
)
4401 IPW_DEBUG_INFO("enter\n");
4403 if (priv
->status_queue
.drv
) {
4404 pci_free_consistent(priv
->pci_dev
, priv
->status_queue
.size
,
4405 priv
->status_queue
.drv
,
4406 priv
->status_queue
.nic
);
4407 priv
->status_queue
.drv
= NULL
;
4410 IPW_DEBUG_INFO("exit\n");
4413 static int bd_queue_allocate(struct ipw2100_priv
*priv
,
4414 struct ipw2100_bd_queue
*q
, int entries
)
4416 IPW_DEBUG_INFO("enter\n");
4418 memset(q
, 0, sizeof(struct ipw2100_bd_queue
));
4420 q
->entries
= entries
;
4421 q
->size
= entries
* sizeof(struct ipw2100_bd
);
4422 q
->drv
= pci_alloc_consistent(priv
->pci_dev
, q
->size
, &q
->nic
);
4425 ("can't allocate shared memory for buffer descriptors\n");
4428 memset(q
->drv
, 0, q
->size
);
4430 IPW_DEBUG_INFO("exit\n");
4435 static void bd_queue_free(struct ipw2100_priv
*priv
, struct ipw2100_bd_queue
*q
)
4437 IPW_DEBUG_INFO("enter\n");
4443 pci_free_consistent(priv
->pci_dev
, q
->size
, q
->drv
, q
->nic
);
4447 IPW_DEBUG_INFO("exit\n");
4450 static void bd_queue_initialize(struct ipw2100_priv
*priv
,
4451 struct ipw2100_bd_queue
*q
, u32 base
, u32 size
,
4454 IPW_DEBUG_INFO("enter\n");
4456 IPW_DEBUG_INFO("initializing bd queue at virt=%p, phys=%08x\n", q
->drv
,
4459 write_register(priv
->net_dev
, base
, q
->nic
);
4460 write_register(priv
->net_dev
, size
, q
->entries
);
4461 write_register(priv
->net_dev
, r
, q
->oldest
);
4462 write_register(priv
->net_dev
, w
, q
->next
);
4464 IPW_DEBUG_INFO("exit\n");
4467 static void ipw2100_kill_works(struct ipw2100_priv
*priv
)
4469 priv
->stop_rf_kill
= 1;
4470 priv
->stop_hang_check
= 1;
4471 cancel_delayed_work_sync(&priv
->reset_work
);
4472 cancel_delayed_work_sync(&priv
->security_work
);
4473 cancel_delayed_work_sync(&priv
->wx_event_work
);
4474 cancel_delayed_work_sync(&priv
->hang_check
);
4475 cancel_delayed_work_sync(&priv
->rf_kill
);
4476 cancel_work_sync(&priv
->scan_event_now
);
4477 cancel_delayed_work_sync(&priv
->scan_event_later
);
4480 static int ipw2100_tx_allocate(struct ipw2100_priv
*priv
)
4482 int i
, j
, err
= -EINVAL
;
4486 IPW_DEBUG_INFO("enter\n");
4488 err
= bd_queue_allocate(priv
, &priv
->tx_queue
, TX_QUEUE_LENGTH
);
4490 IPW_DEBUG_ERROR("%s: failed bd_queue_allocate\n",
4491 priv
->net_dev
->name
);
4496 kmalloc(TX_PENDED_QUEUE_LENGTH
* sizeof(struct ipw2100_tx_packet
),
4498 if (!priv
->tx_buffers
) {
4499 printk(KERN_ERR DRV_NAME
4500 ": %s: alloc failed form tx buffers.\n",
4501 priv
->net_dev
->name
);
4502 bd_queue_free(priv
, &priv
->tx_queue
);
4506 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4507 v
= pci_alloc_consistent(priv
->pci_dev
,
4508 sizeof(struct ipw2100_data_header
),
4511 printk(KERN_ERR DRV_NAME
4512 ": %s: PCI alloc failed for tx " "buffers.\n",
4513 priv
->net_dev
->name
);
4518 priv
->tx_buffers
[i
].type
= DATA
;
4519 priv
->tx_buffers
[i
].info
.d_struct
.data
=
4520 (struct ipw2100_data_header
*)v
;
4521 priv
->tx_buffers
[i
].info
.d_struct
.data_phys
= p
;
4522 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4525 if (i
== TX_PENDED_QUEUE_LENGTH
)
4528 for (j
= 0; j
< i
; j
++) {
4529 pci_free_consistent(priv
->pci_dev
,
4530 sizeof(struct ipw2100_data_header
),
4531 priv
->tx_buffers
[j
].info
.d_struct
.data
,
4532 priv
->tx_buffers
[j
].info
.d_struct
.
4536 kfree(priv
->tx_buffers
);
4537 priv
->tx_buffers
= NULL
;
4542 static void ipw2100_tx_initialize(struct ipw2100_priv
*priv
)
4546 IPW_DEBUG_INFO("enter\n");
4549 * reinitialize packet info lists
4551 INIT_LIST_HEAD(&priv
->fw_pend_list
);
4552 INIT_STAT(&priv
->fw_pend_stat
);
4555 * reinitialize lists
4557 INIT_LIST_HEAD(&priv
->tx_pend_list
);
4558 INIT_LIST_HEAD(&priv
->tx_free_list
);
4559 INIT_STAT(&priv
->tx_pend_stat
);
4560 INIT_STAT(&priv
->tx_free_stat
);
4562 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4563 /* We simply drop any SKBs that have been queued for
4565 if (priv
->tx_buffers
[i
].info
.d_struct
.txb
) {
4566 libipw_txb_free(priv
->tx_buffers
[i
].info
.d_struct
.
4568 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4571 list_add_tail(&priv
->tx_buffers
[i
].list
, &priv
->tx_free_list
);
4574 SET_STAT(&priv
->tx_free_stat
, i
);
4576 priv
->tx_queue
.oldest
= 0;
4577 priv
->tx_queue
.available
= priv
->tx_queue
.entries
;
4578 priv
->tx_queue
.next
= 0;
4579 INIT_STAT(&priv
->txq_stat
);
4580 SET_STAT(&priv
->txq_stat
, priv
->tx_queue
.available
);
4582 bd_queue_initialize(priv
, &priv
->tx_queue
,
4583 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE
,
4584 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE
,
4585 IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX
,
4586 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
);
4588 IPW_DEBUG_INFO("exit\n");
4592 static void ipw2100_tx_free(struct ipw2100_priv
*priv
)
4596 IPW_DEBUG_INFO("enter\n");
4598 bd_queue_free(priv
, &priv
->tx_queue
);
4600 if (!priv
->tx_buffers
)
4603 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4604 if (priv
->tx_buffers
[i
].info
.d_struct
.txb
) {
4605 libipw_txb_free(priv
->tx_buffers
[i
].info
.d_struct
.
4607 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4609 if (priv
->tx_buffers
[i
].info
.d_struct
.data
)
4610 pci_free_consistent(priv
->pci_dev
,
4611 sizeof(struct ipw2100_data_header
),
4612 priv
->tx_buffers
[i
].info
.d_struct
.
4614 priv
->tx_buffers
[i
].info
.d_struct
.
4618 kfree(priv
->tx_buffers
);
4619 priv
->tx_buffers
= NULL
;
4621 IPW_DEBUG_INFO("exit\n");
4624 static int ipw2100_rx_allocate(struct ipw2100_priv
*priv
)
4626 int i
, j
, err
= -EINVAL
;
4628 IPW_DEBUG_INFO("enter\n");
4630 err
= bd_queue_allocate(priv
, &priv
->rx_queue
, RX_QUEUE_LENGTH
);
4632 IPW_DEBUG_INFO("failed bd_queue_allocate\n");
4636 err
= status_queue_allocate(priv
, RX_QUEUE_LENGTH
);
4638 IPW_DEBUG_INFO("failed status_queue_allocate\n");
4639 bd_queue_free(priv
, &priv
->rx_queue
);
4646 priv
->rx_buffers
= kmalloc(RX_QUEUE_LENGTH
*
4647 sizeof(struct ipw2100_rx_packet
),
4649 if (!priv
->rx_buffers
) {
4650 IPW_DEBUG_INFO("can't allocate rx packet buffer table\n");
4652 bd_queue_free(priv
, &priv
->rx_queue
);
4654 status_queue_free(priv
);
4659 for (i
= 0; i
< RX_QUEUE_LENGTH
; i
++) {
4660 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
4662 err
= ipw2100_alloc_skb(priv
, packet
);
4663 if (unlikely(err
)) {
4668 /* The BD holds the cache aligned address */
4669 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
4670 priv
->rx_queue
.drv
[i
].buf_length
= IPW_RX_NIC_BUFFER_LENGTH
;
4671 priv
->status_queue
.drv
[i
].status_fields
= 0;
4674 if (i
== RX_QUEUE_LENGTH
)
4677 for (j
= 0; j
< i
; j
++) {
4678 pci_unmap_single(priv
->pci_dev
, priv
->rx_buffers
[j
].dma_addr
,
4679 sizeof(struct ipw2100_rx_packet
),
4680 PCI_DMA_FROMDEVICE
);
4681 dev_kfree_skb(priv
->rx_buffers
[j
].skb
);
4684 kfree(priv
->rx_buffers
);
4685 priv
->rx_buffers
= NULL
;
4687 bd_queue_free(priv
, &priv
->rx_queue
);
4689 status_queue_free(priv
);
4694 static void ipw2100_rx_initialize(struct ipw2100_priv
*priv
)
4696 IPW_DEBUG_INFO("enter\n");
4698 priv
->rx_queue
.oldest
= 0;
4699 priv
->rx_queue
.available
= priv
->rx_queue
.entries
- 1;
4700 priv
->rx_queue
.next
= priv
->rx_queue
.entries
- 1;
4702 INIT_STAT(&priv
->rxq_stat
);
4703 SET_STAT(&priv
->rxq_stat
, priv
->rx_queue
.available
);
4705 bd_queue_initialize(priv
, &priv
->rx_queue
,
4706 IPW_MEM_HOST_SHARED_RX_BD_BASE
,
4707 IPW_MEM_HOST_SHARED_RX_BD_SIZE
,
4708 IPW_MEM_HOST_SHARED_RX_READ_INDEX
,
4709 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
);
4711 /* set up the status queue */
4712 write_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_STATUS_BASE
,
4713 priv
->status_queue
.nic
);
4715 IPW_DEBUG_INFO("exit\n");
4718 static void ipw2100_rx_free(struct ipw2100_priv
*priv
)
4722 IPW_DEBUG_INFO("enter\n");
4724 bd_queue_free(priv
, &priv
->rx_queue
);
4725 status_queue_free(priv
);
4727 if (!priv
->rx_buffers
)
4730 for (i
= 0; i
< RX_QUEUE_LENGTH
; i
++) {
4731 if (priv
->rx_buffers
[i
].rxp
) {
4732 pci_unmap_single(priv
->pci_dev
,
4733 priv
->rx_buffers
[i
].dma_addr
,
4734 sizeof(struct ipw2100_rx
),
4735 PCI_DMA_FROMDEVICE
);
4736 dev_kfree_skb(priv
->rx_buffers
[i
].skb
);
4740 kfree(priv
->rx_buffers
);
4741 priv
->rx_buffers
= NULL
;
4743 IPW_DEBUG_INFO("exit\n");
4746 static int ipw2100_read_mac_address(struct ipw2100_priv
*priv
)
4748 u32 length
= ETH_ALEN
;
4753 err
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ADAPTER_MAC
, addr
, &length
);
4755 IPW_DEBUG_INFO("MAC address read failed\n");
4759 memcpy(priv
->net_dev
->dev_addr
, addr
, ETH_ALEN
);
4760 IPW_DEBUG_INFO("card MAC is %pM\n", priv
->net_dev
->dev_addr
);
4765 /********************************************************************
4769 ********************************************************************/
4771 static int ipw2100_set_mac_address(struct ipw2100_priv
*priv
, int batch_mode
)
4773 struct host_command cmd
= {
4774 .host_command
= ADAPTER_ADDRESS
,
4775 .host_command_sequence
= 0,
4776 .host_command_length
= ETH_ALEN
4780 IPW_DEBUG_HC("SET_MAC_ADDRESS\n");
4782 IPW_DEBUG_INFO("enter\n");
4784 if (priv
->config
& CFG_CUSTOM_MAC
) {
4785 memcpy(cmd
.host_command_parameters
, priv
->mac_addr
, ETH_ALEN
);
4786 memcpy(priv
->net_dev
->dev_addr
, priv
->mac_addr
, ETH_ALEN
);
4788 memcpy(cmd
.host_command_parameters
, priv
->net_dev
->dev_addr
,
4791 err
= ipw2100_hw_send_command(priv
, &cmd
);
4793 IPW_DEBUG_INFO("exit\n");
4797 static int ipw2100_set_port_type(struct ipw2100_priv
*priv
, u32 port_type
,
4800 struct host_command cmd
= {
4801 .host_command
= PORT_TYPE
,
4802 .host_command_sequence
= 0,
4803 .host_command_length
= sizeof(u32
)
4807 switch (port_type
) {
4809 cmd
.host_command_parameters
[0] = IPW_BSS
;
4812 cmd
.host_command_parameters
[0] = IPW_IBSS
;
4816 IPW_DEBUG_HC("PORT_TYPE: %s\n",
4817 port_type
== IPW_IBSS
? "Ad-Hoc" : "Managed");
4820 err
= ipw2100_disable_adapter(priv
);
4822 printk(KERN_ERR DRV_NAME
4823 ": %s: Could not disable adapter %d\n",
4824 priv
->net_dev
->name
, err
);
4829 /* send cmd to firmware */
4830 err
= ipw2100_hw_send_command(priv
, &cmd
);
4833 ipw2100_enable_adapter(priv
);
4838 static int ipw2100_set_channel(struct ipw2100_priv
*priv
, u32 channel
,
4841 struct host_command cmd
= {
4842 .host_command
= CHANNEL
,
4843 .host_command_sequence
= 0,
4844 .host_command_length
= sizeof(u32
)
4848 cmd
.host_command_parameters
[0] = channel
;
4850 IPW_DEBUG_HC("CHANNEL: %d\n", channel
);
4852 /* If BSS then we don't support channel selection */
4853 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
)
4856 if ((channel
!= 0) &&
4857 ((channel
< REG_MIN_CHANNEL
) || (channel
> REG_MAX_CHANNEL
)))
4861 err
= ipw2100_disable_adapter(priv
);
4866 err
= ipw2100_hw_send_command(priv
, &cmd
);
4868 IPW_DEBUG_INFO("Failed to set channel to %d", channel
);
4873 priv
->config
|= CFG_STATIC_CHANNEL
;
4875 priv
->config
&= ~CFG_STATIC_CHANNEL
;
4877 priv
->channel
= channel
;
4880 err
= ipw2100_enable_adapter(priv
);
4888 static int ipw2100_system_config(struct ipw2100_priv
*priv
, int batch_mode
)
4890 struct host_command cmd
= {
4891 .host_command
= SYSTEM_CONFIG
,
4892 .host_command_sequence
= 0,
4893 .host_command_length
= 12,
4895 u32 ibss_mask
, len
= sizeof(u32
);
4898 /* Set system configuration */
4901 err
= ipw2100_disable_adapter(priv
);
4906 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
)
4907 cmd
.host_command_parameters
[0] |= IPW_CFG_IBSS_AUTO_START
;
4909 cmd
.host_command_parameters
[0] |= IPW_CFG_IBSS_MASK
|
4910 IPW_CFG_BSS_MASK
| IPW_CFG_802_1x_ENABLE
;
4912 if (!(priv
->config
& CFG_LONG_PREAMBLE
))
4913 cmd
.host_command_parameters
[0] |= IPW_CFG_PREAMBLE_AUTO
;
4915 err
= ipw2100_get_ordinal(priv
,
4916 IPW_ORD_EEPROM_IBSS_11B_CHANNELS
,
4919 ibss_mask
= IPW_IBSS_11B_DEFAULT_MASK
;
4921 cmd
.host_command_parameters
[1] = REG_CHANNEL_MASK
;
4922 cmd
.host_command_parameters
[2] = REG_CHANNEL_MASK
& ibss_mask
;
4925 /*cmd.host_command_parameters[0] |= DIVERSITY_ANTENNA_A; */
4927 err
= ipw2100_hw_send_command(priv
, &cmd
);
4931 /* If IPv6 is configured in the kernel then we don't want to filter out all
4932 * of the multicast packets as IPv6 needs some. */
4933 #if !defined(CONFIG_IPV6) && !defined(CONFIG_IPV6_MODULE)
4934 cmd
.host_command
= ADD_MULTICAST
;
4935 cmd
.host_command_sequence
= 0;
4936 cmd
.host_command_length
= 0;
4938 ipw2100_hw_send_command(priv
, &cmd
);
4941 err
= ipw2100_enable_adapter(priv
);
4949 static int ipw2100_set_tx_rates(struct ipw2100_priv
*priv
, u32 rate
,
4952 struct host_command cmd
= {
4953 .host_command
= BASIC_TX_RATES
,
4954 .host_command_sequence
= 0,
4955 .host_command_length
= 4
4959 cmd
.host_command_parameters
[0] = rate
& TX_RATE_MASK
;
4962 err
= ipw2100_disable_adapter(priv
);
4967 /* Set BASIC TX Rate first */
4968 ipw2100_hw_send_command(priv
, &cmd
);
4971 cmd
.host_command
= TX_RATES
;
4972 ipw2100_hw_send_command(priv
, &cmd
);
4974 /* Set MSDU TX Rate */
4975 cmd
.host_command
= MSDU_TX_RATES
;
4976 ipw2100_hw_send_command(priv
, &cmd
);
4979 err
= ipw2100_enable_adapter(priv
);
4984 priv
->tx_rates
= rate
;
4989 static int ipw2100_set_power_mode(struct ipw2100_priv
*priv
, int power_level
)
4991 struct host_command cmd
= {
4992 .host_command
= POWER_MODE
,
4993 .host_command_sequence
= 0,
4994 .host_command_length
= 4
4998 cmd
.host_command_parameters
[0] = power_level
;
5000 err
= ipw2100_hw_send_command(priv
, &cmd
);
5004 if (power_level
== IPW_POWER_MODE_CAM
)
5005 priv
->power_mode
= IPW_POWER_LEVEL(priv
->power_mode
);
5007 priv
->power_mode
= IPW_POWER_ENABLED
| power_level
;
5009 #ifdef IPW2100_TX_POWER
5010 if (priv
->port_type
== IBSS
&& priv
->adhoc_power
!= DFTL_IBSS_TX_POWER
) {
5011 /* Set beacon interval */
5012 cmd
.host_command
= TX_POWER_INDEX
;
5013 cmd
.host_command_parameters
[0] = (u32
) priv
->adhoc_power
;
5015 err
= ipw2100_hw_send_command(priv
, &cmd
);
5024 static int ipw2100_set_rts_threshold(struct ipw2100_priv
*priv
, u32 threshold
)
5026 struct host_command cmd
= {
5027 .host_command
= RTS_THRESHOLD
,
5028 .host_command_sequence
= 0,
5029 .host_command_length
= 4
5033 if (threshold
& RTS_DISABLED
)
5034 cmd
.host_command_parameters
[0] = MAX_RTS_THRESHOLD
;
5036 cmd
.host_command_parameters
[0] = threshold
& ~RTS_DISABLED
;
5038 err
= ipw2100_hw_send_command(priv
, &cmd
);
5042 priv
->rts_threshold
= threshold
;
5048 int ipw2100_set_fragmentation_threshold(struct ipw2100_priv
*priv
,
5049 u32 threshold
, int batch_mode
)
5051 struct host_command cmd
= {
5052 .host_command
= FRAG_THRESHOLD
,
5053 .host_command_sequence
= 0,
5054 .host_command_length
= 4,
5055 .host_command_parameters
[0] = 0,
5060 err
= ipw2100_disable_adapter(priv
);
5066 threshold
= DEFAULT_FRAG_THRESHOLD
;
5068 threshold
= max(threshold
, MIN_FRAG_THRESHOLD
);
5069 threshold
= min(threshold
, MAX_FRAG_THRESHOLD
);
5072 cmd
.host_command_parameters
[0] = threshold
;
5074 IPW_DEBUG_HC("FRAG_THRESHOLD: %u\n", threshold
);
5076 err
= ipw2100_hw_send_command(priv
, &cmd
);
5079 ipw2100_enable_adapter(priv
);
5082 priv
->frag_threshold
= threshold
;
5088 static int ipw2100_set_short_retry(struct ipw2100_priv
*priv
, u32 retry
)
5090 struct host_command cmd
= {
5091 .host_command
= SHORT_RETRY_LIMIT
,
5092 .host_command_sequence
= 0,
5093 .host_command_length
= 4
5097 cmd
.host_command_parameters
[0] = retry
;
5099 err
= ipw2100_hw_send_command(priv
, &cmd
);
5103 priv
->short_retry_limit
= retry
;
5108 static int ipw2100_set_long_retry(struct ipw2100_priv
*priv
, u32 retry
)
5110 struct host_command cmd
= {
5111 .host_command
= LONG_RETRY_LIMIT
,
5112 .host_command_sequence
= 0,
5113 .host_command_length
= 4
5117 cmd
.host_command_parameters
[0] = retry
;
5119 err
= ipw2100_hw_send_command(priv
, &cmd
);
5123 priv
->long_retry_limit
= retry
;
5128 static int ipw2100_set_mandatory_bssid(struct ipw2100_priv
*priv
, u8
* bssid
,
5131 struct host_command cmd
= {
5132 .host_command
= MANDATORY_BSSID
,
5133 .host_command_sequence
= 0,
5134 .host_command_length
= (bssid
== NULL
) ? 0 : ETH_ALEN
5138 #ifdef CONFIG_IPW2100_DEBUG
5140 IPW_DEBUG_HC("MANDATORY_BSSID: %pM\n", bssid
);
5142 IPW_DEBUG_HC("MANDATORY_BSSID: <clear>\n");
5144 /* if BSSID is empty then we disable mandatory bssid mode */
5146 memcpy(cmd
.host_command_parameters
, bssid
, ETH_ALEN
);
5149 err
= ipw2100_disable_adapter(priv
);
5154 err
= ipw2100_hw_send_command(priv
, &cmd
);
5157 ipw2100_enable_adapter(priv
);
5162 static int ipw2100_disassociate_bssid(struct ipw2100_priv
*priv
)
5164 struct host_command cmd
= {
5165 .host_command
= DISASSOCIATION_BSSID
,
5166 .host_command_sequence
= 0,
5167 .host_command_length
= ETH_ALEN
5172 IPW_DEBUG_HC("DISASSOCIATION_BSSID\n");
5175 /* The Firmware currently ignores the BSSID and just disassociates from
5176 * the currently associated AP -- but in the off chance that a future
5177 * firmware does use the BSSID provided here, we go ahead and try and
5178 * set it to the currently associated AP's BSSID */
5179 memcpy(cmd
.host_command_parameters
, priv
->bssid
, ETH_ALEN
);
5181 err
= ipw2100_hw_send_command(priv
, &cmd
);
5186 static int ipw2100_set_wpa_ie(struct ipw2100_priv
*,
5187 struct ipw2100_wpa_assoc_frame
*, int)
5188 __attribute__ ((unused
));
5190 static int ipw2100_set_wpa_ie(struct ipw2100_priv
*priv
,
5191 struct ipw2100_wpa_assoc_frame
*wpa_frame
,
5194 struct host_command cmd
= {
5195 .host_command
= SET_WPA_IE
,
5196 .host_command_sequence
= 0,
5197 .host_command_length
= sizeof(struct ipw2100_wpa_assoc_frame
),
5201 IPW_DEBUG_HC("SET_WPA_IE\n");
5204 err
= ipw2100_disable_adapter(priv
);
5209 memcpy(cmd
.host_command_parameters
, wpa_frame
,
5210 sizeof(struct ipw2100_wpa_assoc_frame
));
5212 err
= ipw2100_hw_send_command(priv
, &cmd
);
5215 if (ipw2100_enable_adapter(priv
))
5222 struct security_info_params
{
5223 u32 allowed_ciphers
;
5226 u8 replay_counters_number
;
5227 u8 unicast_using_group
;
5230 static int ipw2100_set_security_information(struct ipw2100_priv
*priv
,
5233 int unicast_using_group
,
5236 struct host_command cmd
= {
5237 .host_command
= SET_SECURITY_INFORMATION
,
5238 .host_command_sequence
= 0,
5239 .host_command_length
= sizeof(struct security_info_params
)
5241 struct security_info_params
*security
=
5242 (struct security_info_params
*)&cmd
.host_command_parameters
;
5244 memset(security
, 0, sizeof(*security
));
5246 /* If shared key AP authentication is turned on, then we need to
5247 * configure the firmware to try and use it.
5249 * Actual data encryption/decryption is handled by the host. */
5250 security
->auth_mode
= auth_mode
;
5251 security
->unicast_using_group
= unicast_using_group
;
5253 switch (security_level
) {
5256 security
->allowed_ciphers
= IPW_NONE_CIPHER
;
5259 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5263 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5264 IPW_WEP104_CIPHER
| IPW_TKIP_CIPHER
;
5266 case SEC_LEVEL_2_CKIP
:
5267 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5268 IPW_WEP104_CIPHER
| IPW_CKIP_CIPHER
;
5271 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5272 IPW_WEP104_CIPHER
| IPW_TKIP_CIPHER
| IPW_CCMP_CIPHER
;
5277 ("SET_SECURITY_INFORMATION: auth:%d cipher:0x%02X (level %d)\n",
5278 security
->auth_mode
, security
->allowed_ciphers
, security_level
);
5280 security
->replay_counters_number
= 0;
5283 err
= ipw2100_disable_adapter(priv
);
5288 err
= ipw2100_hw_send_command(priv
, &cmd
);
5291 ipw2100_enable_adapter(priv
);
5296 static int ipw2100_set_tx_power(struct ipw2100_priv
*priv
, u32 tx_power
)
5298 struct host_command cmd
= {
5299 .host_command
= TX_POWER_INDEX
,
5300 .host_command_sequence
= 0,
5301 .host_command_length
= 4
5306 if (tx_power
!= IPW_TX_POWER_DEFAULT
)
5307 tmp
= (tx_power
- IPW_TX_POWER_MIN_DBM
) * 16 /
5308 (IPW_TX_POWER_MAX_DBM
- IPW_TX_POWER_MIN_DBM
);
5310 cmd
.host_command_parameters
[0] = tmp
;
5312 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
)
5313 err
= ipw2100_hw_send_command(priv
, &cmd
);
5315 priv
->tx_power
= tx_power
;
5320 static int ipw2100_set_ibss_beacon_interval(struct ipw2100_priv
*priv
,
5321 u32 interval
, int batch_mode
)
5323 struct host_command cmd
= {
5324 .host_command
= BEACON_INTERVAL
,
5325 .host_command_sequence
= 0,
5326 .host_command_length
= 4
5330 cmd
.host_command_parameters
[0] = interval
;
5332 IPW_DEBUG_INFO("enter\n");
5334 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5336 err
= ipw2100_disable_adapter(priv
);
5341 ipw2100_hw_send_command(priv
, &cmd
);
5344 err
= ipw2100_enable_adapter(priv
);
5350 IPW_DEBUG_INFO("exit\n");
5355 static void ipw2100_queues_initialize(struct ipw2100_priv
*priv
)
5357 ipw2100_tx_initialize(priv
);
5358 ipw2100_rx_initialize(priv
);
5359 ipw2100_msg_initialize(priv
);
5362 static void ipw2100_queues_free(struct ipw2100_priv
*priv
)
5364 ipw2100_tx_free(priv
);
5365 ipw2100_rx_free(priv
);
5366 ipw2100_msg_free(priv
);
5369 static int ipw2100_queues_allocate(struct ipw2100_priv
*priv
)
5371 if (ipw2100_tx_allocate(priv
) ||
5372 ipw2100_rx_allocate(priv
) || ipw2100_msg_allocate(priv
))
5378 ipw2100_tx_free(priv
);
5379 ipw2100_rx_free(priv
);
5380 ipw2100_msg_free(priv
);
5384 #define IPW_PRIVACY_CAPABLE 0x0008
5386 static int ipw2100_set_wep_flags(struct ipw2100_priv
*priv
, u32 flags
,
5389 struct host_command cmd
= {
5390 .host_command
= WEP_FLAGS
,
5391 .host_command_sequence
= 0,
5392 .host_command_length
= 4
5396 cmd
.host_command_parameters
[0] = flags
;
5398 IPW_DEBUG_HC("WEP_FLAGS: flags = 0x%08X\n", flags
);
5401 err
= ipw2100_disable_adapter(priv
);
5403 printk(KERN_ERR DRV_NAME
5404 ": %s: Could not disable adapter %d\n",
5405 priv
->net_dev
->name
, err
);
5410 /* send cmd to firmware */
5411 err
= ipw2100_hw_send_command(priv
, &cmd
);
5414 ipw2100_enable_adapter(priv
);
5419 struct ipw2100_wep_key
{
5425 /* Macros to ease up priting WEP keys */
5426 #define WEP_FMT_64 "%02X%02X%02X%02X-%02X"
5427 #define WEP_FMT_128 "%02X%02X%02X%02X-%02X%02X%02X%02X-%02X%02X%02X"
5428 #define WEP_STR_64(x) x[0],x[1],x[2],x[3],x[4]
5429 #define WEP_STR_128(x) x[0],x[1],x[2],x[3],x[4],x[5],x[6],x[7],x[8],x[9],x[10]
5434 * @priv: struct to work on
5435 * @idx: index of the key we want to set
5436 * @key: ptr to the key data to set
5437 * @len: length of the buffer at @key
5438 * @batch_mode: FIXME perform the operation in batch mode, not
5439 * disabling the device.
5441 * @returns 0 if OK, < 0 errno code on error.
5443 * Fill out a command structure with the new wep key, length an
5444 * index and send it down the wire.
5446 static int ipw2100_set_key(struct ipw2100_priv
*priv
,
5447 int idx
, char *key
, int len
, int batch_mode
)
5449 int keylen
= len
? (len
<= 5 ? 5 : 13) : 0;
5450 struct host_command cmd
= {
5451 .host_command
= WEP_KEY_INFO
,
5452 .host_command_sequence
= 0,
5453 .host_command_length
= sizeof(struct ipw2100_wep_key
),
5455 struct ipw2100_wep_key
*wep_key
= (void *)cmd
.host_command_parameters
;
5458 IPW_DEBUG_HC("WEP_KEY_INFO: index = %d, len = %d/%d\n",
5461 /* NOTE: We don't check cached values in case the firmware was reset
5462 * or some other problem is occurring. If the user is setting the key,
5463 * then we push the change */
5466 wep_key
->len
= keylen
;
5469 memcpy(wep_key
->key
, key
, len
);
5470 memset(wep_key
->key
+ len
, 0, keylen
- len
);
5473 /* Will be optimized out on debug not being configured in */
5475 IPW_DEBUG_WEP("%s: Clearing key %d\n",
5476 priv
->net_dev
->name
, wep_key
->idx
);
5477 else if (keylen
== 5)
5478 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_64
"\n",
5479 priv
->net_dev
->name
, wep_key
->idx
, wep_key
->len
,
5480 WEP_STR_64(wep_key
->key
));
5482 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_128
5484 priv
->net_dev
->name
, wep_key
->idx
, wep_key
->len
,
5485 WEP_STR_128(wep_key
->key
));
5488 err
= ipw2100_disable_adapter(priv
);
5489 /* FIXME: IPG: shouldn't this prink be in _disable_adapter()? */
5491 printk(KERN_ERR DRV_NAME
5492 ": %s: Could not disable adapter %d\n",
5493 priv
->net_dev
->name
, err
);
5498 /* send cmd to firmware */
5499 err
= ipw2100_hw_send_command(priv
, &cmd
);
5502 int err2
= ipw2100_enable_adapter(priv
);
5509 static int ipw2100_set_key_index(struct ipw2100_priv
*priv
,
5510 int idx
, int batch_mode
)
5512 struct host_command cmd
= {
5513 .host_command
= WEP_KEY_INDEX
,
5514 .host_command_sequence
= 0,
5515 .host_command_length
= 4,
5516 .host_command_parameters
= {idx
},
5520 IPW_DEBUG_HC("WEP_KEY_INDEX: index = %d\n", idx
);
5522 if (idx
< 0 || idx
> 3)
5526 err
= ipw2100_disable_adapter(priv
);
5528 printk(KERN_ERR DRV_NAME
5529 ": %s: Could not disable adapter %d\n",
5530 priv
->net_dev
->name
, err
);
5535 /* send cmd to firmware */
5536 err
= ipw2100_hw_send_command(priv
, &cmd
);
5539 ipw2100_enable_adapter(priv
);
5544 static int ipw2100_configure_security(struct ipw2100_priv
*priv
, int batch_mode
)
5546 int i
, err
, auth_mode
, sec_level
, use_group
;
5548 if (!(priv
->status
& STATUS_RUNNING
))
5552 err
= ipw2100_disable_adapter(priv
);
5557 if (!priv
->ieee
->sec
.enabled
) {
5559 ipw2100_set_security_information(priv
, IPW_AUTH_OPEN
,
5562 auth_mode
= IPW_AUTH_OPEN
;
5563 if (priv
->ieee
->sec
.flags
& SEC_AUTH_MODE
) {
5564 if (priv
->ieee
->sec
.auth_mode
== WLAN_AUTH_SHARED_KEY
)
5565 auth_mode
= IPW_AUTH_SHARED
;
5566 else if (priv
->ieee
->sec
.auth_mode
== WLAN_AUTH_LEAP
)
5567 auth_mode
= IPW_AUTH_LEAP_CISCO_ID
;
5570 sec_level
= SEC_LEVEL_0
;
5571 if (priv
->ieee
->sec
.flags
& SEC_LEVEL
)
5572 sec_level
= priv
->ieee
->sec
.level
;
5575 if (priv
->ieee
->sec
.flags
& SEC_UNICAST_GROUP
)
5576 use_group
= priv
->ieee
->sec
.unicast_uses_group
;
5579 ipw2100_set_security_information(priv
, auth_mode
, sec_level
,
5586 if (priv
->ieee
->sec
.enabled
) {
5587 for (i
= 0; i
< 4; i
++) {
5588 if (!(priv
->ieee
->sec
.flags
& (1 << i
))) {
5589 memset(priv
->ieee
->sec
.keys
[i
], 0, WEP_KEY_LEN
);
5590 priv
->ieee
->sec
.key_sizes
[i
] = 0;
5592 err
= ipw2100_set_key(priv
, i
,
5593 priv
->ieee
->sec
.keys
[i
],
5601 ipw2100_set_key_index(priv
, priv
->ieee
->crypt_info
.tx_keyidx
, 1);
5604 /* Always enable privacy so the Host can filter WEP packets if
5605 * encrypted data is sent up */
5607 ipw2100_set_wep_flags(priv
,
5609 enabled
? IPW_PRIVACY_CAPABLE
: 0, 1);
5613 priv
->status
&= ~STATUS_SECURITY_UPDATED
;
5617 ipw2100_enable_adapter(priv
);
5622 static void ipw2100_security_work(struct work_struct
*work
)
5624 struct ipw2100_priv
*priv
=
5625 container_of(work
, struct ipw2100_priv
, security_work
.work
);
5627 /* If we happen to have reconnected before we get a chance to
5628 * process this, then update the security settings--which causes
5629 * a disassociation to occur */
5630 if (!(priv
->status
& STATUS_ASSOCIATED
) &&
5631 priv
->status
& STATUS_SECURITY_UPDATED
)
5632 ipw2100_configure_security(priv
, 0);
5635 static void shim__set_security(struct net_device
*dev
,
5636 struct libipw_security
*sec
)
5638 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5639 int i
, force_update
= 0;
5641 mutex_lock(&priv
->action_mutex
);
5642 if (!(priv
->status
& STATUS_INITIALIZED
))
5645 for (i
= 0; i
< 4; i
++) {
5646 if (sec
->flags
& (1 << i
)) {
5647 priv
->ieee
->sec
.key_sizes
[i
] = sec
->key_sizes
[i
];
5648 if (sec
->key_sizes
[i
] == 0)
5649 priv
->ieee
->sec
.flags
&= ~(1 << i
);
5651 memcpy(priv
->ieee
->sec
.keys
[i
], sec
->keys
[i
],
5653 if (sec
->level
== SEC_LEVEL_1
) {
5654 priv
->ieee
->sec
.flags
|= (1 << i
);
5655 priv
->status
|= STATUS_SECURITY_UPDATED
;
5657 priv
->ieee
->sec
.flags
&= ~(1 << i
);
5661 if ((sec
->flags
& SEC_ACTIVE_KEY
) &&
5662 priv
->ieee
->sec
.active_key
!= sec
->active_key
) {
5663 if (sec
->active_key
<= 3) {
5664 priv
->ieee
->sec
.active_key
= sec
->active_key
;
5665 priv
->ieee
->sec
.flags
|= SEC_ACTIVE_KEY
;
5667 priv
->ieee
->sec
.flags
&= ~SEC_ACTIVE_KEY
;
5669 priv
->status
|= STATUS_SECURITY_UPDATED
;
5672 if ((sec
->flags
& SEC_AUTH_MODE
) &&
5673 (priv
->ieee
->sec
.auth_mode
!= sec
->auth_mode
)) {
5674 priv
->ieee
->sec
.auth_mode
= sec
->auth_mode
;
5675 priv
->ieee
->sec
.flags
|= SEC_AUTH_MODE
;
5676 priv
->status
|= STATUS_SECURITY_UPDATED
;
5679 if (sec
->flags
& SEC_ENABLED
&& priv
->ieee
->sec
.enabled
!= sec
->enabled
) {
5680 priv
->ieee
->sec
.flags
|= SEC_ENABLED
;
5681 priv
->ieee
->sec
.enabled
= sec
->enabled
;
5682 priv
->status
|= STATUS_SECURITY_UPDATED
;
5686 if (sec
->flags
& SEC_ENCRYPT
)
5687 priv
->ieee
->sec
.encrypt
= sec
->encrypt
;
5689 if (sec
->flags
& SEC_LEVEL
&& priv
->ieee
->sec
.level
!= sec
->level
) {
5690 priv
->ieee
->sec
.level
= sec
->level
;
5691 priv
->ieee
->sec
.flags
|= SEC_LEVEL
;
5692 priv
->status
|= STATUS_SECURITY_UPDATED
;
5695 IPW_DEBUG_WEP("Security flags: %c %c%c%c%c %c%c%c%c\n",
5696 priv
->ieee
->sec
.flags
& (1 << 8) ? '1' : '0',
5697 priv
->ieee
->sec
.flags
& (1 << 7) ? '1' : '0',
5698 priv
->ieee
->sec
.flags
& (1 << 6) ? '1' : '0',
5699 priv
->ieee
->sec
.flags
& (1 << 5) ? '1' : '0',
5700 priv
->ieee
->sec
.flags
& (1 << 4) ? '1' : '0',
5701 priv
->ieee
->sec
.flags
& (1 << 3) ? '1' : '0',
5702 priv
->ieee
->sec
.flags
& (1 << 2) ? '1' : '0',
5703 priv
->ieee
->sec
.flags
& (1 << 1) ? '1' : '0',
5704 priv
->ieee
->sec
.flags
& (1 << 0) ? '1' : '0');
5706 /* As a temporary work around to enable WPA until we figure out why
5707 * wpa_supplicant toggles the security capability of the driver, which
5708 * forces a disassocation with force_update...
5710 * if (force_update || !(priv->status & STATUS_ASSOCIATED))*/
5711 if (!(priv
->status
& (STATUS_ASSOCIATED
| STATUS_ASSOCIATING
)))
5712 ipw2100_configure_security(priv
, 0);
5714 mutex_unlock(&priv
->action_mutex
);
5717 static int ipw2100_adapter_setup(struct ipw2100_priv
*priv
)
5723 IPW_DEBUG_INFO("enter\n");
5725 err
= ipw2100_disable_adapter(priv
);
5728 #ifdef CONFIG_IPW2100_MONITOR
5729 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
5730 err
= ipw2100_set_channel(priv
, priv
->channel
, batch_mode
);
5734 IPW_DEBUG_INFO("exit\n");
5738 #endif /* CONFIG_IPW2100_MONITOR */
5740 err
= ipw2100_read_mac_address(priv
);
5744 err
= ipw2100_set_mac_address(priv
, batch_mode
);
5748 err
= ipw2100_set_port_type(priv
, priv
->ieee
->iw_mode
, batch_mode
);
5752 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5753 err
= ipw2100_set_channel(priv
, priv
->channel
, batch_mode
);
5758 err
= ipw2100_system_config(priv
, batch_mode
);
5762 err
= ipw2100_set_tx_rates(priv
, priv
->tx_rates
, batch_mode
);
5766 /* Default to power mode OFF */
5767 err
= ipw2100_set_power_mode(priv
, IPW_POWER_MODE_CAM
);
5771 err
= ipw2100_set_rts_threshold(priv
, priv
->rts_threshold
);
5775 if (priv
->config
& CFG_STATIC_BSSID
)
5776 bssid
= priv
->bssid
;
5779 err
= ipw2100_set_mandatory_bssid(priv
, bssid
, batch_mode
);
5783 if (priv
->config
& CFG_STATIC_ESSID
)
5784 err
= ipw2100_set_essid(priv
, priv
->essid
, priv
->essid_len
,
5787 err
= ipw2100_set_essid(priv
, NULL
, 0, batch_mode
);
5791 err
= ipw2100_configure_security(priv
, batch_mode
);
5795 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5797 ipw2100_set_ibss_beacon_interval(priv
,
5798 priv
->beacon_interval
,
5803 err
= ipw2100_set_tx_power(priv
, priv
->tx_power
);
5809 err = ipw2100_set_fragmentation_threshold(
5810 priv, priv->frag_threshold, batch_mode);
5815 IPW_DEBUG_INFO("exit\n");
5820 /*************************************************************************
5822 * EXTERNALLY CALLED METHODS
5824 *************************************************************************/
5826 /* This method is called by the network layer -- not to be confused with
5827 * ipw2100_set_mac_address() declared above called by this driver (and this
5828 * method as well) to talk to the firmware */
5829 static int ipw2100_set_address(struct net_device
*dev
, void *p
)
5831 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5832 struct sockaddr
*addr
= p
;
5835 if (!is_valid_ether_addr(addr
->sa_data
))
5836 return -EADDRNOTAVAIL
;
5838 mutex_lock(&priv
->action_mutex
);
5840 priv
->config
|= CFG_CUSTOM_MAC
;
5841 memcpy(priv
->mac_addr
, addr
->sa_data
, ETH_ALEN
);
5843 err
= ipw2100_set_mac_address(priv
, 0);
5847 priv
->reset_backoff
= 0;
5848 mutex_unlock(&priv
->action_mutex
);
5849 ipw2100_reset_adapter(&priv
->reset_work
.work
);
5853 mutex_unlock(&priv
->action_mutex
);
5857 static int ipw2100_open(struct net_device
*dev
)
5859 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5860 unsigned long flags
;
5861 IPW_DEBUG_INFO("dev->open\n");
5863 spin_lock_irqsave(&priv
->low_lock
, flags
);
5864 if (priv
->status
& STATUS_ASSOCIATED
) {
5865 netif_carrier_on(dev
);
5866 netif_start_queue(dev
);
5868 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
5873 static int ipw2100_close(struct net_device
*dev
)
5875 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5876 unsigned long flags
;
5877 struct list_head
*element
;
5878 struct ipw2100_tx_packet
*packet
;
5880 IPW_DEBUG_INFO("enter\n");
5882 spin_lock_irqsave(&priv
->low_lock
, flags
);
5884 if (priv
->status
& STATUS_ASSOCIATED
)
5885 netif_carrier_off(dev
);
5886 netif_stop_queue(dev
);
5888 /* Flush the TX queue ... */
5889 while (!list_empty(&priv
->tx_pend_list
)) {
5890 element
= priv
->tx_pend_list
.next
;
5891 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
5894 DEC_STAT(&priv
->tx_pend_stat
);
5896 libipw_txb_free(packet
->info
.d_struct
.txb
);
5897 packet
->info
.d_struct
.txb
= NULL
;
5899 list_add_tail(element
, &priv
->tx_free_list
);
5900 INC_STAT(&priv
->tx_free_stat
);
5902 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
5904 IPW_DEBUG_INFO("exit\n");
5910 * TODO: Fix this function... its just wrong
5912 static void ipw2100_tx_timeout(struct net_device
*dev
)
5914 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5916 dev
->stats
.tx_errors
++;
5918 #ifdef CONFIG_IPW2100_MONITOR
5919 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
5923 IPW_DEBUG_INFO("%s: TX timed out. Scheduling firmware restart.\n",
5925 schedule_reset(priv
);
5928 static int ipw2100_wpa_enable(struct ipw2100_priv
*priv
, int value
)
5930 /* This is called when wpa_supplicant loads and closes the driver
5932 priv
->ieee
->wpa_enabled
= value
;
5936 static int ipw2100_wpa_set_auth_algs(struct ipw2100_priv
*priv
, int value
)
5939 struct libipw_device
*ieee
= priv
->ieee
;
5940 struct libipw_security sec
= {
5941 .flags
= SEC_AUTH_MODE
,
5945 if (value
& IW_AUTH_ALG_SHARED_KEY
) {
5946 sec
.auth_mode
= WLAN_AUTH_SHARED_KEY
;
5948 } else if (value
& IW_AUTH_ALG_OPEN_SYSTEM
) {
5949 sec
.auth_mode
= WLAN_AUTH_OPEN
;
5951 } else if (value
& IW_AUTH_ALG_LEAP
) {
5952 sec
.auth_mode
= WLAN_AUTH_LEAP
;
5957 if (ieee
->set_security
)
5958 ieee
->set_security(ieee
->dev
, &sec
);
5965 static void ipw2100_wpa_assoc_frame(struct ipw2100_priv
*priv
,
5966 char *wpa_ie
, int wpa_ie_len
)
5969 struct ipw2100_wpa_assoc_frame frame
;
5971 frame
.fixed_ie_mask
= 0;
5974 memcpy(frame
.var_ie
, wpa_ie
, wpa_ie_len
);
5975 frame
.var_ie_len
= wpa_ie_len
;
5977 /* make sure WPA is enabled */
5978 ipw2100_wpa_enable(priv
, 1);
5979 ipw2100_set_wpa_ie(priv
, &frame
, 0);
5982 static void ipw_ethtool_get_drvinfo(struct net_device
*dev
,
5983 struct ethtool_drvinfo
*info
)
5985 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5986 char fw_ver
[64], ucode_ver
[64];
5988 strlcpy(info
->driver
, DRV_NAME
, sizeof(info
->driver
));
5989 strlcpy(info
->version
, DRV_VERSION
, sizeof(info
->version
));
5991 ipw2100_get_fwversion(priv
, fw_ver
, sizeof(fw_ver
));
5992 ipw2100_get_ucodeversion(priv
, ucode_ver
, sizeof(ucode_ver
));
5994 snprintf(info
->fw_version
, sizeof(info
->fw_version
), "%s:%d:%s",
5995 fw_ver
, priv
->eeprom_version
, ucode_ver
);
5997 strlcpy(info
->bus_info
, pci_name(priv
->pci_dev
),
5998 sizeof(info
->bus_info
));
6001 static u32
ipw2100_ethtool_get_link(struct net_device
*dev
)
6003 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6004 return (priv
->status
& STATUS_ASSOCIATED
) ? 1 : 0;
6007 static const struct ethtool_ops ipw2100_ethtool_ops
= {
6008 .get_link
= ipw2100_ethtool_get_link
,
6009 .get_drvinfo
= ipw_ethtool_get_drvinfo
,
6012 static void ipw2100_hang_check(struct work_struct
*work
)
6014 struct ipw2100_priv
*priv
=
6015 container_of(work
, struct ipw2100_priv
, hang_check
.work
);
6016 unsigned long flags
;
6017 u32 rtc
= 0xa5a5a5a5;
6018 u32 len
= sizeof(rtc
);
6021 spin_lock_irqsave(&priv
->low_lock
, flags
);
6023 if (priv
->fatal_error
!= 0) {
6024 /* If fatal_error is set then we need to restart */
6025 IPW_DEBUG_INFO("%s: Hardware fatal error detected.\n",
6026 priv
->net_dev
->name
);
6029 } else if (ipw2100_get_ordinal(priv
, IPW_ORD_RTC_TIME
, &rtc
, &len
) ||
6030 (rtc
== priv
->last_rtc
)) {
6031 /* Check if firmware is hung */
6032 IPW_DEBUG_INFO("%s: Firmware RTC stalled.\n",
6033 priv
->net_dev
->name
);
6040 priv
->stop_hang_check
= 1;
6043 /* Restart the NIC */
6044 schedule_reset(priv
);
6047 priv
->last_rtc
= rtc
;
6049 if (!priv
->stop_hang_check
)
6050 schedule_delayed_work(&priv
->hang_check
, HZ
/ 2);
6052 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
6055 static void ipw2100_rf_kill(struct work_struct
*work
)
6057 struct ipw2100_priv
*priv
=
6058 container_of(work
, struct ipw2100_priv
, rf_kill
.work
);
6059 unsigned long flags
;
6061 spin_lock_irqsave(&priv
->low_lock
, flags
);
6063 if (rf_kill_active(priv
)) {
6064 IPW_DEBUG_RF_KILL("RF Kill active, rescheduling GPIO check\n");
6065 if (!priv
->stop_rf_kill
)
6066 schedule_delayed_work(&priv
->rf_kill
,
6067 round_jiffies_relative(HZ
));
6071 /* RF Kill is now disabled, so bring the device back up */
6073 if (!(priv
->status
& STATUS_RF_KILL_MASK
)) {
6074 IPW_DEBUG_RF_KILL("HW RF Kill no longer active, restarting "
6076 schedule_reset(priv
);
6078 IPW_DEBUG_RF_KILL("HW RF Kill deactivated. SW RF Kill still "
6082 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
6085 static void ipw2100_irq_tasklet(struct ipw2100_priv
*priv
);
6087 static const struct net_device_ops ipw2100_netdev_ops
= {
6088 .ndo_open
= ipw2100_open
,
6089 .ndo_stop
= ipw2100_close
,
6090 .ndo_start_xmit
= libipw_xmit
,
6091 .ndo_change_mtu
= libipw_change_mtu
,
6092 .ndo_init
= ipw2100_net_init
,
6093 .ndo_tx_timeout
= ipw2100_tx_timeout
,
6094 .ndo_set_mac_address
= ipw2100_set_address
,
6095 .ndo_validate_addr
= eth_validate_addr
,
6098 /* Look into using netdev destructor to shutdown libipw? */
6100 static struct net_device
*ipw2100_alloc_device(struct pci_dev
*pci_dev
,
6101 void __iomem
* ioaddr
)
6103 struct ipw2100_priv
*priv
;
6104 struct net_device
*dev
;
6106 dev
= alloc_libipw(sizeof(struct ipw2100_priv
), 0);
6109 priv
= libipw_priv(dev
);
6110 priv
->ieee
= netdev_priv(dev
);
6111 priv
->pci_dev
= pci_dev
;
6112 priv
->net_dev
= dev
;
6113 priv
->ioaddr
= ioaddr
;
6115 priv
->ieee
->hard_start_xmit
= ipw2100_tx
;
6116 priv
->ieee
->set_security
= shim__set_security
;
6118 priv
->ieee
->perfect_rssi
= -20;
6119 priv
->ieee
->worst_rssi
= -85;
6121 dev
->netdev_ops
= &ipw2100_netdev_ops
;
6122 dev
->ethtool_ops
= &ipw2100_ethtool_ops
;
6123 dev
->wireless_handlers
= &ipw2100_wx_handler_def
;
6124 priv
->wireless_data
.libipw
= priv
->ieee
;
6125 dev
->wireless_data
= &priv
->wireless_data
;
6126 dev
->watchdog_timeo
= 3 * HZ
;
6129 /* NOTE: We don't use the wireless_handlers hook
6130 * in dev as the system will start throwing WX requests
6131 * to us before we're actually initialized and it just
6132 * ends up causing problems. So, we just handle
6133 * the WX extensions through the ipw2100_ioctl interface */
6135 /* memset() puts everything to 0, so we only have explicitly set
6136 * those values that need to be something else */
6138 /* If power management is turned on, default to AUTO mode */
6139 priv
->power_mode
= IPW_POWER_AUTO
;
6141 #ifdef CONFIG_IPW2100_MONITOR
6142 priv
->config
|= CFG_CRC_CHECK
;
6144 priv
->ieee
->wpa_enabled
= 0;
6145 priv
->ieee
->drop_unencrypted
= 0;
6146 priv
->ieee
->privacy_invoked
= 0;
6147 priv
->ieee
->ieee802_1x
= 1;
6149 /* Set module parameters */
6150 switch (network_mode
) {
6152 priv
->ieee
->iw_mode
= IW_MODE_ADHOC
;
6154 #ifdef CONFIG_IPW2100_MONITOR
6156 priv
->ieee
->iw_mode
= IW_MODE_MONITOR
;
6161 priv
->ieee
->iw_mode
= IW_MODE_INFRA
;
6166 priv
->status
|= STATUS_RF_KILL_SW
;
6169 ((channel
>= REG_MIN_CHANNEL
) && (channel
<= REG_MAX_CHANNEL
))) {
6170 priv
->config
|= CFG_STATIC_CHANNEL
;
6171 priv
->channel
= channel
;
6175 priv
->config
|= CFG_ASSOCIATE
;
6177 priv
->beacon_interval
= DEFAULT_BEACON_INTERVAL
;
6178 priv
->short_retry_limit
= DEFAULT_SHORT_RETRY_LIMIT
;
6179 priv
->long_retry_limit
= DEFAULT_LONG_RETRY_LIMIT
;
6180 priv
->rts_threshold
= DEFAULT_RTS_THRESHOLD
| RTS_DISABLED
;
6181 priv
->frag_threshold
= DEFAULT_FTS
| FRAG_DISABLED
;
6182 priv
->tx_power
= IPW_TX_POWER_DEFAULT
;
6183 priv
->tx_rates
= DEFAULT_TX_RATES
;
6185 strcpy(priv
->nick
, "ipw2100");
6187 spin_lock_init(&priv
->low_lock
);
6188 mutex_init(&priv
->action_mutex
);
6189 mutex_init(&priv
->adapter_mutex
);
6191 init_waitqueue_head(&priv
->wait_command_queue
);
6193 netif_carrier_off(dev
);
6195 INIT_LIST_HEAD(&priv
->msg_free_list
);
6196 INIT_LIST_HEAD(&priv
->msg_pend_list
);
6197 INIT_STAT(&priv
->msg_free_stat
);
6198 INIT_STAT(&priv
->msg_pend_stat
);
6200 INIT_LIST_HEAD(&priv
->tx_free_list
);
6201 INIT_LIST_HEAD(&priv
->tx_pend_list
);
6202 INIT_STAT(&priv
->tx_free_stat
);
6203 INIT_STAT(&priv
->tx_pend_stat
);
6205 INIT_LIST_HEAD(&priv
->fw_pend_list
);
6206 INIT_STAT(&priv
->fw_pend_stat
);
6208 INIT_DELAYED_WORK(&priv
->reset_work
, ipw2100_reset_adapter
);
6209 INIT_DELAYED_WORK(&priv
->security_work
, ipw2100_security_work
);
6210 INIT_DELAYED_WORK(&priv
->wx_event_work
, ipw2100_wx_event_work
);
6211 INIT_DELAYED_WORK(&priv
->hang_check
, ipw2100_hang_check
);
6212 INIT_DELAYED_WORK(&priv
->rf_kill
, ipw2100_rf_kill
);
6213 INIT_WORK(&priv
->scan_event_now
, ipw2100_scan_event_now
);
6214 INIT_DELAYED_WORK(&priv
->scan_event_later
, ipw2100_scan_event_later
);
6216 tasklet_init(&priv
->irq_tasklet
, (void (*)(unsigned long))
6217 ipw2100_irq_tasklet
, (unsigned long)priv
);
6219 /* NOTE: We do not start the deferred work for status checks yet */
6220 priv
->stop_rf_kill
= 1;
6221 priv
->stop_hang_check
= 1;
6226 static int ipw2100_pci_init_one(struct pci_dev
*pci_dev
,
6227 const struct pci_device_id
*ent
)
6229 void __iomem
*ioaddr
;
6230 struct net_device
*dev
= NULL
;
6231 struct ipw2100_priv
*priv
= NULL
;
6236 IPW_DEBUG_INFO("enter\n");
6238 if (!(pci_resource_flags(pci_dev
, 0) & IORESOURCE_MEM
)) {
6239 IPW_DEBUG_INFO("weird - resource type is not memory\n");
6244 ioaddr
= pci_iomap(pci_dev
, 0, 0);
6246 printk(KERN_WARNING DRV_NAME
6247 "Error calling ioremap_nocache.\n");
6252 /* allocate and initialize our net_device */
6253 dev
= ipw2100_alloc_device(pci_dev
, ioaddr
);
6255 printk(KERN_WARNING DRV_NAME
6256 "Error calling ipw2100_alloc_device.\n");
6261 /* set up PCI mappings for device */
6262 err
= pci_enable_device(pci_dev
);
6264 printk(KERN_WARNING DRV_NAME
6265 "Error calling pci_enable_device.\n");
6269 priv
= libipw_priv(dev
);
6271 pci_set_master(pci_dev
);
6272 pci_set_drvdata(pci_dev
, priv
);
6274 err
= pci_set_dma_mask(pci_dev
, DMA_BIT_MASK(32));
6276 printk(KERN_WARNING DRV_NAME
6277 "Error calling pci_set_dma_mask.\n");
6278 pci_disable_device(pci_dev
);
6282 err
= pci_request_regions(pci_dev
, DRV_NAME
);
6284 printk(KERN_WARNING DRV_NAME
6285 "Error calling pci_request_regions.\n");
6286 pci_disable_device(pci_dev
);
6290 /* We disable the RETRY_TIMEOUT register (0x41) to keep
6291 * PCI Tx retries from interfering with C3 CPU state */
6292 pci_read_config_dword(pci_dev
, 0x40, &val
);
6293 if ((val
& 0x0000ff00) != 0)
6294 pci_write_config_dword(pci_dev
, 0x40, val
& 0xffff00ff);
6296 pci_set_power_state(pci_dev
, PCI_D0
);
6298 if (!ipw2100_hw_is_adapter_in_system(dev
)) {
6299 printk(KERN_WARNING DRV_NAME
6300 "Device not found via register read.\n");
6305 SET_NETDEV_DEV(dev
, &pci_dev
->dev
);
6307 /* Force interrupts to be shut off on the device */
6308 priv
->status
|= STATUS_INT_ENABLED
;
6309 ipw2100_disable_interrupts(priv
);
6311 /* Allocate and initialize the Tx/Rx queues and lists */
6312 if (ipw2100_queues_allocate(priv
)) {
6313 printk(KERN_WARNING DRV_NAME
6314 "Error calling ipw2100_queues_allocate.\n");
6318 ipw2100_queues_initialize(priv
);
6320 err
= request_irq(pci_dev
->irq
,
6321 ipw2100_interrupt
, IRQF_SHARED
, dev
->name
, priv
);
6323 printk(KERN_WARNING DRV_NAME
6324 "Error calling request_irq: %d.\n", pci_dev
->irq
);
6327 dev
->irq
= pci_dev
->irq
;
6329 IPW_DEBUG_INFO("Attempting to register device...\n");
6331 printk(KERN_INFO DRV_NAME
6332 ": Detected Intel PRO/Wireless 2100 Network Connection\n");
6334 /* Bring up the interface. Pre 0.46, after we registered the
6335 * network device we would call ipw2100_up. This introduced a race
6336 * condition with newer hotplug configurations (network was coming
6337 * up and making calls before the device was initialized).
6339 * If we called ipw2100_up before we registered the device, then the
6340 * device name wasn't registered. So, we instead use the net_dev->init
6341 * member to call a function that then just turns and calls ipw2100_up.
6342 * net_dev->init is called after name allocation but before the
6343 * notifier chain is called */
6344 err
= register_netdev(dev
);
6346 printk(KERN_WARNING DRV_NAME
6347 "Error calling register_netdev.\n");
6352 err
= ipw2100_wdev_init(dev
);
6356 mutex_lock(&priv
->action_mutex
);
6358 IPW_DEBUG_INFO("%s: Bound to %s\n", dev
->name
, pci_name(pci_dev
));
6360 /* perform this after register_netdev so that dev->name is set */
6361 err
= sysfs_create_group(&pci_dev
->dev
.kobj
, &ipw2100_attribute_group
);
6365 /* If the RF Kill switch is disabled, go ahead and complete the
6366 * startup sequence */
6367 if (!(priv
->status
& STATUS_RF_KILL_MASK
)) {
6368 /* Enable the adapter - sends HOST_COMPLETE */
6369 if (ipw2100_enable_adapter(priv
)) {
6370 printk(KERN_WARNING DRV_NAME
6371 ": %s: failed in call to enable adapter.\n",
6372 priv
->net_dev
->name
);
6373 ipw2100_hw_stop_adapter(priv
);
6378 /* Start a scan . . . */
6379 ipw2100_set_scan_options(priv
);
6380 ipw2100_start_scan(priv
);
6383 IPW_DEBUG_INFO("exit\n");
6385 priv
->status
|= STATUS_INITIALIZED
;
6387 mutex_unlock(&priv
->action_mutex
);
6392 mutex_unlock(&priv
->action_mutex
);
6393 wiphy_unregister(priv
->ieee
->wdev
.wiphy
);
6394 kfree(priv
->ieee
->bg_band
.channels
);
6398 unregister_netdev(dev
);
6400 ipw2100_hw_stop_adapter(priv
);
6402 ipw2100_disable_interrupts(priv
);
6405 free_irq(dev
->irq
, priv
);
6407 ipw2100_kill_works(priv
);
6409 /* These are safe to call even if they weren't allocated */
6410 ipw2100_queues_free(priv
);
6411 sysfs_remove_group(&pci_dev
->dev
.kobj
,
6412 &ipw2100_attribute_group
);
6414 free_libipw(dev
, 0);
6415 pci_set_drvdata(pci_dev
, NULL
);
6418 pci_iounmap(pci_dev
, ioaddr
);
6420 pci_release_regions(pci_dev
);
6421 pci_disable_device(pci_dev
);
6425 static void __devexit
ipw2100_pci_remove_one(struct pci_dev
*pci_dev
)
6427 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6428 struct net_device
*dev
= priv
->net_dev
;
6430 mutex_lock(&priv
->action_mutex
);
6432 priv
->status
&= ~STATUS_INITIALIZED
;
6434 sysfs_remove_group(&pci_dev
->dev
.kobj
, &ipw2100_attribute_group
);
6437 if (ipw2100_firmware
.version
)
6438 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
6440 /* Take down the hardware */
6443 /* Release the mutex so that the network subsystem can
6444 * complete any needed calls into the driver... */
6445 mutex_unlock(&priv
->action_mutex
);
6447 /* Unregister the device first - this results in close()
6448 * being called if the device is open. If we free storage
6449 * first, then close() will crash.
6450 * FIXME: remove the comment above. */
6451 unregister_netdev(dev
);
6453 ipw2100_kill_works(priv
);
6455 ipw2100_queues_free(priv
);
6457 /* Free potential debugging firmware snapshot */
6458 ipw2100_snapshot_free(priv
);
6460 free_irq(dev
->irq
, priv
);
6462 pci_iounmap(pci_dev
, priv
->ioaddr
);
6464 /* wiphy_unregister needs to be here, before free_libipw */
6465 wiphy_unregister(priv
->ieee
->wdev
.wiphy
);
6466 kfree(priv
->ieee
->bg_band
.channels
);
6467 free_libipw(dev
, 0);
6469 pci_release_regions(pci_dev
);
6470 pci_disable_device(pci_dev
);
6472 IPW_DEBUG_INFO("exit\n");
6476 static int ipw2100_suspend(struct pci_dev
*pci_dev
, pm_message_t state
)
6478 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6479 struct net_device
*dev
= priv
->net_dev
;
6481 IPW_DEBUG_INFO("%s: Going into suspend...\n", dev
->name
);
6483 mutex_lock(&priv
->action_mutex
);
6484 if (priv
->status
& STATUS_INITIALIZED
) {
6485 /* Take down the device; powers it off, etc. */
6489 /* Remove the PRESENT state of the device */
6490 netif_device_detach(dev
);
6492 pci_save_state(pci_dev
);
6493 pci_disable_device(pci_dev
);
6494 pci_set_power_state(pci_dev
, PCI_D3hot
);
6496 priv
->suspend_at
= get_seconds();
6498 mutex_unlock(&priv
->action_mutex
);
6503 static int ipw2100_resume(struct pci_dev
*pci_dev
)
6505 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6506 struct net_device
*dev
= priv
->net_dev
;
6510 if (IPW2100_PM_DISABLED
)
6513 mutex_lock(&priv
->action_mutex
);
6515 IPW_DEBUG_INFO("%s: Coming out of suspend...\n", dev
->name
);
6517 pci_set_power_state(pci_dev
, PCI_D0
);
6518 err
= pci_enable_device(pci_dev
);
6520 printk(KERN_ERR
"%s: pci_enable_device failed on resume\n",
6522 mutex_unlock(&priv
->action_mutex
);
6525 pci_restore_state(pci_dev
);
6528 * Suspend/Resume resets the PCI configuration space, so we have to
6529 * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
6530 * from interfering with C3 CPU state. pci_restore_state won't help
6531 * here since it only restores the first 64 bytes pci config header.
6533 pci_read_config_dword(pci_dev
, 0x40, &val
);
6534 if ((val
& 0x0000ff00) != 0)
6535 pci_write_config_dword(pci_dev
, 0x40, val
& 0xffff00ff);
6537 /* Set the device back into the PRESENT state; this will also wake
6538 * the queue of needed */
6539 netif_device_attach(dev
);
6541 priv
->suspend_time
= get_seconds() - priv
->suspend_at
;
6543 /* Bring the device back up */
6544 if (!(priv
->status
& STATUS_RF_KILL_SW
))
6545 ipw2100_up(priv
, 0);
6547 mutex_unlock(&priv
->action_mutex
);
6553 static void ipw2100_shutdown(struct pci_dev
*pci_dev
)
6555 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6557 /* Take down the device; powers it off, etc. */
6560 pci_disable_device(pci_dev
);
6563 #define IPW2100_DEV_ID(x) { PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, x }
6565 static DEFINE_PCI_DEVICE_TABLE(ipw2100_pci_id_table
) = {
6566 IPW2100_DEV_ID(0x2520), /* IN 2100A mPCI 3A */
6567 IPW2100_DEV_ID(0x2521), /* IN 2100A mPCI 3B */
6568 IPW2100_DEV_ID(0x2524), /* IN 2100A mPCI 3B */
6569 IPW2100_DEV_ID(0x2525), /* IN 2100A mPCI 3B */
6570 IPW2100_DEV_ID(0x2526), /* IN 2100A mPCI Gen A3 */
6571 IPW2100_DEV_ID(0x2522), /* IN 2100 mPCI 3B */
6572 IPW2100_DEV_ID(0x2523), /* IN 2100 mPCI 3A */
6573 IPW2100_DEV_ID(0x2527), /* IN 2100 mPCI 3B */
6574 IPW2100_DEV_ID(0x2528), /* IN 2100 mPCI 3B */
6575 IPW2100_DEV_ID(0x2529), /* IN 2100 mPCI 3B */
6576 IPW2100_DEV_ID(0x252B), /* IN 2100 mPCI 3A */
6577 IPW2100_DEV_ID(0x252C), /* IN 2100 mPCI 3A */
6578 IPW2100_DEV_ID(0x252D), /* IN 2100 mPCI 3A */
6580 IPW2100_DEV_ID(0x2550), /* IB 2100A mPCI 3B */
6581 IPW2100_DEV_ID(0x2551), /* IB 2100 mPCI 3B */
6582 IPW2100_DEV_ID(0x2553), /* IB 2100 mPCI 3B */
6583 IPW2100_DEV_ID(0x2554), /* IB 2100 mPCI 3B */
6584 IPW2100_DEV_ID(0x2555), /* IB 2100 mPCI 3B */
6586 IPW2100_DEV_ID(0x2560), /* DE 2100A mPCI 3A */
6587 IPW2100_DEV_ID(0x2562), /* DE 2100A mPCI 3A */
6588 IPW2100_DEV_ID(0x2563), /* DE 2100A mPCI 3A */
6589 IPW2100_DEV_ID(0x2561), /* DE 2100 mPCI 3A */
6590 IPW2100_DEV_ID(0x2565), /* DE 2100 mPCI 3A */
6591 IPW2100_DEV_ID(0x2566), /* DE 2100 mPCI 3A */
6592 IPW2100_DEV_ID(0x2567), /* DE 2100 mPCI 3A */
6594 IPW2100_DEV_ID(0x2570), /* GA 2100 mPCI 3B */
6596 IPW2100_DEV_ID(0x2580), /* TO 2100A mPCI 3B */
6597 IPW2100_DEV_ID(0x2582), /* TO 2100A mPCI 3B */
6598 IPW2100_DEV_ID(0x2583), /* TO 2100A mPCI 3B */
6599 IPW2100_DEV_ID(0x2581), /* TO 2100 mPCI 3B */
6600 IPW2100_DEV_ID(0x2585), /* TO 2100 mPCI 3B */
6601 IPW2100_DEV_ID(0x2586), /* TO 2100 mPCI 3B */
6602 IPW2100_DEV_ID(0x2587), /* TO 2100 mPCI 3B */
6604 IPW2100_DEV_ID(0x2590), /* SO 2100A mPCI 3B */
6605 IPW2100_DEV_ID(0x2592), /* SO 2100A mPCI 3B */
6606 IPW2100_DEV_ID(0x2591), /* SO 2100 mPCI 3B */
6607 IPW2100_DEV_ID(0x2593), /* SO 2100 mPCI 3B */
6608 IPW2100_DEV_ID(0x2596), /* SO 2100 mPCI 3B */
6609 IPW2100_DEV_ID(0x2598), /* SO 2100 mPCI 3B */
6611 IPW2100_DEV_ID(0x25A0), /* HP 2100 mPCI 3B */
6615 MODULE_DEVICE_TABLE(pci
, ipw2100_pci_id_table
);
6617 static struct pci_driver ipw2100_pci_driver
= {
6619 .id_table
= ipw2100_pci_id_table
,
6620 .probe
= ipw2100_pci_init_one
,
6621 .remove
= __devexit_p(ipw2100_pci_remove_one
),
6623 .suspend
= ipw2100_suspend
,
6624 .resume
= ipw2100_resume
,
6626 .shutdown
= ipw2100_shutdown
,
6630 * Initialize the ipw2100 driver/module
6632 * @returns 0 if ok, < 0 errno node con error.
6634 * Note: we cannot init the /proc stuff until the PCI driver is there,
6635 * or we risk an unlikely race condition on someone accessing
6636 * uninitialized data in the PCI dev struct through /proc.
6638 static int __init
ipw2100_init(void)
6642 printk(KERN_INFO DRV_NAME
": %s, %s\n", DRV_DESCRIPTION
, DRV_VERSION
);
6643 printk(KERN_INFO DRV_NAME
": %s\n", DRV_COPYRIGHT
);
6645 pm_qos_add_request(&ipw2100_pm_qos_req
, PM_QOS_CPU_DMA_LATENCY
,
6646 PM_QOS_DEFAULT_VALUE
);
6648 ret
= pci_register_driver(&ipw2100_pci_driver
);
6652 #ifdef CONFIG_IPW2100_DEBUG
6653 ipw2100_debug_level
= debug
;
6654 ret
= driver_create_file(&ipw2100_pci_driver
.driver
,
6655 &driver_attr_debug_level
);
6663 * Cleanup ipw2100 driver registration
6665 static void __exit
ipw2100_exit(void)
6667 /* FIXME: IPG: check that we have no instances of the devices open */
6668 #ifdef CONFIG_IPW2100_DEBUG
6669 driver_remove_file(&ipw2100_pci_driver
.driver
,
6670 &driver_attr_debug_level
);
6672 pci_unregister_driver(&ipw2100_pci_driver
);
6673 pm_qos_remove_request(&ipw2100_pm_qos_req
);
6676 module_init(ipw2100_init
);
6677 module_exit(ipw2100_exit
);
6679 static int ipw2100_wx_get_name(struct net_device
*dev
,
6680 struct iw_request_info
*info
,
6681 union iwreq_data
*wrqu
, char *extra
)
6684 * This can be called at any time. No action lock required
6687 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6688 if (!(priv
->status
& STATUS_ASSOCIATED
))
6689 strcpy(wrqu
->name
, "unassociated");
6691 snprintf(wrqu
->name
, IFNAMSIZ
, "IEEE 802.11b");
6693 IPW_DEBUG_WX("Name: %s\n", wrqu
->name
);
6697 static int ipw2100_wx_set_freq(struct net_device
*dev
,
6698 struct iw_request_info
*info
,
6699 union iwreq_data
*wrqu
, char *extra
)
6701 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6702 struct iw_freq
*fwrq
= &wrqu
->freq
;
6705 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
)
6708 mutex_lock(&priv
->action_mutex
);
6709 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6714 /* if setting by freq convert to channel */
6716 if ((fwrq
->m
>= (int)2.412e8
&& fwrq
->m
<= (int)2.487e8
)) {
6717 int f
= fwrq
->m
/ 100000;
6720 while ((c
< REG_MAX_CHANNEL
) &&
6721 (f
!= ipw2100_frequencies
[c
]))
6724 /* hack to fall through */
6730 if (fwrq
->e
> 0 || fwrq
->m
> 1000) {
6733 } else { /* Set the channel */
6734 IPW_DEBUG_WX("SET Freq/Channel -> %d\n", fwrq
->m
);
6735 err
= ipw2100_set_channel(priv
, fwrq
->m
, 0);
6739 mutex_unlock(&priv
->action_mutex
);
6743 static int ipw2100_wx_get_freq(struct net_device
*dev
,
6744 struct iw_request_info
*info
,
6745 union iwreq_data
*wrqu
, char *extra
)
6748 * This can be called at any time. No action lock required
6751 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6755 /* If we are associated, trying to associate, or have a statically
6756 * configured CHANNEL then return that; otherwise return ANY */
6757 if (priv
->config
& CFG_STATIC_CHANNEL
||
6758 priv
->status
& STATUS_ASSOCIATED
)
6759 wrqu
->freq
.m
= priv
->channel
;
6763 IPW_DEBUG_WX("GET Freq/Channel -> %d\n", priv
->channel
);
6768 static int ipw2100_wx_set_mode(struct net_device
*dev
,
6769 struct iw_request_info
*info
,
6770 union iwreq_data
*wrqu
, char *extra
)
6772 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6775 IPW_DEBUG_WX("SET Mode -> %d\n", wrqu
->mode
);
6777 if (wrqu
->mode
== priv
->ieee
->iw_mode
)
6780 mutex_lock(&priv
->action_mutex
);
6781 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6786 switch (wrqu
->mode
) {
6787 #ifdef CONFIG_IPW2100_MONITOR
6788 case IW_MODE_MONITOR
:
6789 err
= ipw2100_switch_mode(priv
, IW_MODE_MONITOR
);
6791 #endif /* CONFIG_IPW2100_MONITOR */
6793 err
= ipw2100_switch_mode(priv
, IW_MODE_ADHOC
);
6798 err
= ipw2100_switch_mode(priv
, IW_MODE_INFRA
);
6803 mutex_unlock(&priv
->action_mutex
);
6807 static int ipw2100_wx_get_mode(struct net_device
*dev
,
6808 struct iw_request_info
*info
,
6809 union iwreq_data
*wrqu
, char *extra
)
6812 * This can be called at any time. No action lock required
6815 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6817 wrqu
->mode
= priv
->ieee
->iw_mode
;
6818 IPW_DEBUG_WX("GET Mode -> %d\n", wrqu
->mode
);
6823 #define POWER_MODES 5
6825 /* Values are in microsecond */
6826 static const s32 timeout_duration
[POWER_MODES
] = {
6834 static const s32 period_duration
[POWER_MODES
] = {
6842 static int ipw2100_wx_get_range(struct net_device
*dev
,
6843 struct iw_request_info
*info
,
6844 union iwreq_data
*wrqu
, char *extra
)
6847 * This can be called at any time. No action lock required
6850 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6851 struct iw_range
*range
= (struct iw_range
*)extra
;
6855 wrqu
->data
.length
= sizeof(*range
);
6856 memset(range
, 0, sizeof(*range
));
6858 /* Let's try to keep this struct in the same order as in
6859 * linux/include/wireless.h
6862 /* TODO: See what values we can set, and remove the ones we can't
6863 * set, or fill them with some default data.
6866 /* ~5 Mb/s real (802.11b) */
6867 range
->throughput
= 5 * 1000 * 1000;
6869 // range->sensitivity; /* signal level threshold range */
6871 range
->max_qual
.qual
= 100;
6872 /* TODO: Find real max RSSI and stick here */
6873 range
->max_qual
.level
= 0;
6874 range
->max_qual
.noise
= 0;
6875 range
->max_qual
.updated
= 7; /* Updated all three */
6877 range
->avg_qual
.qual
= 70; /* > 8% missed beacons is 'bad' */
6878 /* TODO: Find real 'good' to 'bad' threshold value for RSSI */
6879 range
->avg_qual
.level
= 20 + IPW2100_RSSI_TO_DBM
;
6880 range
->avg_qual
.noise
= 0;
6881 range
->avg_qual
.updated
= 7; /* Updated all three */
6883 range
->num_bitrates
= RATE_COUNT
;
6885 for (i
= 0; i
< RATE_COUNT
&& i
< IW_MAX_BITRATES
; i
++) {
6886 range
->bitrate
[i
] = ipw2100_bg_rates
[i
].bitrate
* 100 * 1000;
6889 range
->min_rts
= MIN_RTS_THRESHOLD
;
6890 range
->max_rts
= MAX_RTS_THRESHOLD
;
6891 range
->min_frag
= MIN_FRAG_THRESHOLD
;
6892 range
->max_frag
= MAX_FRAG_THRESHOLD
;
6894 range
->min_pmp
= period_duration
[0]; /* Minimal PM period */
6895 range
->max_pmp
= period_duration
[POWER_MODES
- 1]; /* Maximal PM period */
6896 range
->min_pmt
= timeout_duration
[POWER_MODES
- 1]; /* Minimal PM timeout */
6897 range
->max_pmt
= timeout_duration
[0]; /* Maximal PM timeout */
6899 /* How to decode max/min PM period */
6900 range
->pmp_flags
= IW_POWER_PERIOD
;
6901 /* How to decode max/min PM period */
6902 range
->pmt_flags
= IW_POWER_TIMEOUT
;
6903 /* What PM options are supported */
6904 range
->pm_capa
= IW_POWER_TIMEOUT
| IW_POWER_PERIOD
;
6906 range
->encoding_size
[0] = 5;
6907 range
->encoding_size
[1] = 13; /* Different token sizes */
6908 range
->num_encoding_sizes
= 2; /* Number of entry in the list */
6909 range
->max_encoding_tokens
= WEP_KEYS
; /* Max number of tokens */
6910 // range->encoding_login_index; /* token index for login token */
6912 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
6913 range
->txpower_capa
= IW_TXPOW_DBM
;
6914 range
->num_txpower
= IW_MAX_TXPOWER
;
6915 for (i
= 0, level
= (IPW_TX_POWER_MAX_DBM
* 16);
6918 ((IPW_TX_POWER_MAX_DBM
-
6919 IPW_TX_POWER_MIN_DBM
) * 16) / (IW_MAX_TXPOWER
- 1))
6920 range
->txpower
[i
] = level
/ 16;
6922 range
->txpower_capa
= 0;
6923 range
->num_txpower
= 0;
6926 /* Set the Wireless Extension versions */
6927 range
->we_version_compiled
= WIRELESS_EXT
;
6928 range
->we_version_source
= 18;
6930 // range->retry_capa; /* What retry options are supported */
6931 // range->retry_flags; /* How to decode max/min retry limit */
6932 // range->r_time_flags; /* How to decode max/min retry life */
6933 // range->min_retry; /* Minimal number of retries */
6934 // range->max_retry; /* Maximal number of retries */
6935 // range->min_r_time; /* Minimal retry lifetime */
6936 // range->max_r_time; /* Maximal retry lifetime */
6938 range
->num_channels
= FREQ_COUNT
;
6941 for (i
= 0; i
< FREQ_COUNT
; i
++) {
6942 // TODO: Include only legal frequencies for some countries
6943 // if (local->channel_mask & (1 << i)) {
6944 range
->freq
[val
].i
= i
+ 1;
6945 range
->freq
[val
].m
= ipw2100_frequencies
[i
] * 100000;
6946 range
->freq
[val
].e
= 1;
6949 if (val
== IW_MAX_FREQUENCIES
)
6952 range
->num_frequency
= val
;
6954 /* Event capability (kernel + driver) */
6955 range
->event_capa
[0] = (IW_EVENT_CAPA_K_0
|
6956 IW_EVENT_CAPA_MASK(SIOCGIWAP
));
6957 range
->event_capa
[1] = IW_EVENT_CAPA_K_1
;
6959 range
->enc_capa
= IW_ENC_CAPA_WPA
| IW_ENC_CAPA_WPA2
|
6960 IW_ENC_CAPA_CIPHER_TKIP
| IW_ENC_CAPA_CIPHER_CCMP
;
6962 IPW_DEBUG_WX("GET Range\n");
6967 static int ipw2100_wx_set_wap(struct net_device
*dev
,
6968 struct iw_request_info
*info
,
6969 union iwreq_data
*wrqu
, char *extra
)
6971 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6974 static const unsigned char any
[] = {
6975 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
6977 static const unsigned char off
[] = {
6978 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
6982 if (wrqu
->ap_addr
.sa_family
!= ARPHRD_ETHER
)
6985 mutex_lock(&priv
->action_mutex
);
6986 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6991 if (!memcmp(any
, wrqu
->ap_addr
.sa_data
, ETH_ALEN
) ||
6992 !memcmp(off
, wrqu
->ap_addr
.sa_data
, ETH_ALEN
)) {
6993 /* we disable mandatory BSSID association */
6994 IPW_DEBUG_WX("exit - disable mandatory BSSID\n");
6995 priv
->config
&= ~CFG_STATIC_BSSID
;
6996 err
= ipw2100_set_mandatory_bssid(priv
, NULL
, 0);
7000 priv
->config
|= CFG_STATIC_BSSID
;
7001 memcpy(priv
->mandatory_bssid_mac
, wrqu
->ap_addr
.sa_data
, ETH_ALEN
);
7003 err
= ipw2100_set_mandatory_bssid(priv
, wrqu
->ap_addr
.sa_data
, 0);
7005 IPW_DEBUG_WX("SET BSSID -> %pM\n", wrqu
->ap_addr
.sa_data
);
7008 mutex_unlock(&priv
->action_mutex
);
7012 static int ipw2100_wx_get_wap(struct net_device
*dev
,
7013 struct iw_request_info
*info
,
7014 union iwreq_data
*wrqu
, char *extra
)
7017 * This can be called at any time. No action lock required
7020 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7022 /* If we are associated, trying to associate, or have a statically
7023 * configured BSSID then return that; otherwise return ANY */
7024 if (priv
->config
& CFG_STATIC_BSSID
|| priv
->status
& STATUS_ASSOCIATED
) {
7025 wrqu
->ap_addr
.sa_family
= ARPHRD_ETHER
;
7026 memcpy(wrqu
->ap_addr
.sa_data
, priv
->bssid
, ETH_ALEN
);
7028 memset(wrqu
->ap_addr
.sa_data
, 0, ETH_ALEN
);
7030 IPW_DEBUG_WX("Getting WAP BSSID: %pM\n", wrqu
->ap_addr
.sa_data
);
7034 static int ipw2100_wx_set_essid(struct net_device
*dev
,
7035 struct iw_request_info
*info
,
7036 union iwreq_data
*wrqu
, char *extra
)
7038 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7039 char *essid
= ""; /* ANY */
7042 DECLARE_SSID_BUF(ssid
);
7044 mutex_lock(&priv
->action_mutex
);
7045 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7050 if (wrqu
->essid
.flags
&& wrqu
->essid
.length
) {
7051 length
= wrqu
->essid
.length
;
7056 IPW_DEBUG_WX("Setting ESSID to ANY\n");
7057 priv
->config
&= ~CFG_STATIC_ESSID
;
7058 err
= ipw2100_set_essid(priv
, NULL
, 0, 0);
7062 length
= min(length
, IW_ESSID_MAX_SIZE
);
7064 priv
->config
|= CFG_STATIC_ESSID
;
7066 if (priv
->essid_len
== length
&& !memcmp(priv
->essid
, extra
, length
)) {
7067 IPW_DEBUG_WX("ESSID set to current ESSID.\n");
7072 IPW_DEBUG_WX("Setting ESSID: '%s' (%d)\n",
7073 print_ssid(ssid
, essid
, length
), length
);
7075 priv
->essid_len
= length
;
7076 memcpy(priv
->essid
, essid
, priv
->essid_len
);
7078 err
= ipw2100_set_essid(priv
, essid
, length
, 0);
7081 mutex_unlock(&priv
->action_mutex
);
7085 static int ipw2100_wx_get_essid(struct net_device
*dev
,
7086 struct iw_request_info
*info
,
7087 union iwreq_data
*wrqu
, char *extra
)
7090 * This can be called at any time. No action lock required
7093 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7094 DECLARE_SSID_BUF(ssid
);
7096 /* If we are associated, trying to associate, or have a statically
7097 * configured ESSID then return that; otherwise return ANY */
7098 if (priv
->config
& CFG_STATIC_ESSID
|| priv
->status
& STATUS_ASSOCIATED
) {
7099 IPW_DEBUG_WX("Getting essid: '%s'\n",
7100 print_ssid(ssid
, priv
->essid
, priv
->essid_len
));
7101 memcpy(extra
, priv
->essid
, priv
->essid_len
);
7102 wrqu
->essid
.length
= priv
->essid_len
;
7103 wrqu
->essid
.flags
= 1; /* active */
7105 IPW_DEBUG_WX("Getting essid: ANY\n");
7106 wrqu
->essid
.length
= 0;
7107 wrqu
->essid
.flags
= 0; /* active */
7113 static int ipw2100_wx_set_nick(struct net_device
*dev
,
7114 struct iw_request_info
*info
,
7115 union iwreq_data
*wrqu
, char *extra
)
7118 * This can be called at any time. No action lock required
7121 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7123 if (wrqu
->data
.length
> IW_ESSID_MAX_SIZE
)
7126 wrqu
->data
.length
= min((size_t) wrqu
->data
.length
, sizeof(priv
->nick
));
7127 memset(priv
->nick
, 0, sizeof(priv
->nick
));
7128 memcpy(priv
->nick
, extra
, wrqu
->data
.length
);
7130 IPW_DEBUG_WX("SET Nickname -> %s\n", priv
->nick
);
7135 static int ipw2100_wx_get_nick(struct net_device
*dev
,
7136 struct iw_request_info
*info
,
7137 union iwreq_data
*wrqu
, char *extra
)
7140 * This can be called at any time. No action lock required
7143 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7145 wrqu
->data
.length
= strlen(priv
->nick
);
7146 memcpy(extra
, priv
->nick
, wrqu
->data
.length
);
7147 wrqu
->data
.flags
= 1; /* active */
7149 IPW_DEBUG_WX("GET Nickname -> %s\n", extra
);
7154 static int ipw2100_wx_set_rate(struct net_device
*dev
,
7155 struct iw_request_info
*info
,
7156 union iwreq_data
*wrqu
, char *extra
)
7158 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7159 u32 target_rate
= wrqu
->bitrate
.value
;
7163 mutex_lock(&priv
->action_mutex
);
7164 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7171 if (target_rate
== 1000000 ||
7172 (!wrqu
->bitrate
.fixed
&& target_rate
> 1000000))
7173 rate
|= TX_RATE_1_MBIT
;
7174 if (target_rate
== 2000000 ||
7175 (!wrqu
->bitrate
.fixed
&& target_rate
> 2000000))
7176 rate
|= TX_RATE_2_MBIT
;
7177 if (target_rate
== 5500000 ||
7178 (!wrqu
->bitrate
.fixed
&& target_rate
> 5500000))
7179 rate
|= TX_RATE_5_5_MBIT
;
7180 if (target_rate
== 11000000 ||
7181 (!wrqu
->bitrate
.fixed
&& target_rate
> 11000000))
7182 rate
|= TX_RATE_11_MBIT
;
7184 rate
= DEFAULT_TX_RATES
;
7186 err
= ipw2100_set_tx_rates(priv
, rate
, 0);
7188 IPW_DEBUG_WX("SET Rate -> %04X\n", rate
);
7190 mutex_unlock(&priv
->action_mutex
);
7194 static int ipw2100_wx_get_rate(struct net_device
*dev
,
7195 struct iw_request_info
*info
,
7196 union iwreq_data
*wrqu
, char *extra
)
7198 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7200 unsigned int len
= sizeof(val
);
7203 if (!(priv
->status
& STATUS_ENABLED
) ||
7204 priv
->status
& STATUS_RF_KILL_MASK
||
7205 !(priv
->status
& STATUS_ASSOCIATED
)) {
7206 wrqu
->bitrate
.value
= 0;
7210 mutex_lock(&priv
->action_mutex
);
7211 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7216 err
= ipw2100_get_ordinal(priv
, IPW_ORD_CURRENT_TX_RATE
, &val
, &len
);
7218 IPW_DEBUG_WX("failed querying ordinals.\n");
7222 switch (val
& TX_RATE_MASK
) {
7223 case TX_RATE_1_MBIT
:
7224 wrqu
->bitrate
.value
= 1000000;
7226 case TX_RATE_2_MBIT
:
7227 wrqu
->bitrate
.value
= 2000000;
7229 case TX_RATE_5_5_MBIT
:
7230 wrqu
->bitrate
.value
= 5500000;
7232 case TX_RATE_11_MBIT
:
7233 wrqu
->bitrate
.value
= 11000000;
7236 wrqu
->bitrate
.value
= 0;
7239 IPW_DEBUG_WX("GET Rate -> %d\n", wrqu
->bitrate
.value
);
7242 mutex_unlock(&priv
->action_mutex
);
7246 static int ipw2100_wx_set_rts(struct net_device
*dev
,
7247 struct iw_request_info
*info
,
7248 union iwreq_data
*wrqu
, char *extra
)
7250 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7253 /* Auto RTS not yet supported */
7254 if (wrqu
->rts
.fixed
== 0)
7257 mutex_lock(&priv
->action_mutex
);
7258 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7263 if (wrqu
->rts
.disabled
)
7264 value
= priv
->rts_threshold
| RTS_DISABLED
;
7266 if (wrqu
->rts
.value
< 1 || wrqu
->rts
.value
> 2304) {
7270 value
= wrqu
->rts
.value
;
7273 err
= ipw2100_set_rts_threshold(priv
, value
);
7275 IPW_DEBUG_WX("SET RTS Threshold -> 0x%08X\n", value
);
7277 mutex_unlock(&priv
->action_mutex
);
7281 static int ipw2100_wx_get_rts(struct net_device
*dev
,
7282 struct iw_request_info
*info
,
7283 union iwreq_data
*wrqu
, char *extra
)
7286 * This can be called at any time. No action lock required
7289 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7291 wrqu
->rts
.value
= priv
->rts_threshold
& ~RTS_DISABLED
;
7292 wrqu
->rts
.fixed
= 1; /* no auto select */
7294 /* If RTS is set to the default value, then it is disabled */
7295 wrqu
->rts
.disabled
= (priv
->rts_threshold
& RTS_DISABLED
) ? 1 : 0;
7297 IPW_DEBUG_WX("GET RTS Threshold -> 0x%08X\n", wrqu
->rts
.value
);
7302 static int ipw2100_wx_set_txpow(struct net_device
*dev
,
7303 struct iw_request_info
*info
,
7304 union iwreq_data
*wrqu
, char *extra
)
7306 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7309 if (ipw_radio_kill_sw(priv
, wrqu
->txpower
.disabled
))
7310 return -EINPROGRESS
;
7312 if (priv
->ieee
->iw_mode
!= IW_MODE_ADHOC
)
7315 if ((wrqu
->txpower
.flags
& IW_TXPOW_TYPE
) != IW_TXPOW_DBM
)
7318 if (wrqu
->txpower
.fixed
== 0)
7319 value
= IPW_TX_POWER_DEFAULT
;
7321 if (wrqu
->txpower
.value
< IPW_TX_POWER_MIN_DBM
||
7322 wrqu
->txpower
.value
> IPW_TX_POWER_MAX_DBM
)
7325 value
= wrqu
->txpower
.value
;
7328 mutex_lock(&priv
->action_mutex
);
7329 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7334 err
= ipw2100_set_tx_power(priv
, value
);
7336 IPW_DEBUG_WX("SET TX Power -> %d\n", value
);
7339 mutex_unlock(&priv
->action_mutex
);
7343 static int ipw2100_wx_get_txpow(struct net_device
*dev
,
7344 struct iw_request_info
*info
,
7345 union iwreq_data
*wrqu
, char *extra
)
7348 * This can be called at any time. No action lock required
7351 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7353 wrqu
->txpower
.disabled
= (priv
->status
& STATUS_RF_KILL_MASK
) ? 1 : 0;
7355 if (priv
->tx_power
== IPW_TX_POWER_DEFAULT
) {
7356 wrqu
->txpower
.fixed
= 0;
7357 wrqu
->txpower
.value
= IPW_TX_POWER_MAX_DBM
;
7359 wrqu
->txpower
.fixed
= 1;
7360 wrqu
->txpower
.value
= priv
->tx_power
;
7363 wrqu
->txpower
.flags
= IW_TXPOW_DBM
;
7365 IPW_DEBUG_WX("GET TX Power -> %d\n", wrqu
->txpower
.value
);
7370 static int ipw2100_wx_set_frag(struct net_device
*dev
,
7371 struct iw_request_info
*info
,
7372 union iwreq_data
*wrqu
, char *extra
)
7375 * This can be called at any time. No action lock required
7378 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7380 if (!wrqu
->frag
.fixed
)
7383 if (wrqu
->frag
.disabled
) {
7384 priv
->frag_threshold
|= FRAG_DISABLED
;
7385 priv
->ieee
->fts
= DEFAULT_FTS
;
7387 if (wrqu
->frag
.value
< MIN_FRAG_THRESHOLD
||
7388 wrqu
->frag
.value
> MAX_FRAG_THRESHOLD
)
7391 priv
->ieee
->fts
= wrqu
->frag
.value
& ~0x1;
7392 priv
->frag_threshold
= priv
->ieee
->fts
;
7395 IPW_DEBUG_WX("SET Frag Threshold -> %d\n", priv
->ieee
->fts
);
7400 static int ipw2100_wx_get_frag(struct net_device
*dev
,
7401 struct iw_request_info
*info
,
7402 union iwreq_data
*wrqu
, char *extra
)
7405 * This can be called at any time. No action lock required
7408 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7409 wrqu
->frag
.value
= priv
->frag_threshold
& ~FRAG_DISABLED
;
7410 wrqu
->frag
.fixed
= 0; /* no auto select */
7411 wrqu
->frag
.disabled
= (priv
->frag_threshold
& FRAG_DISABLED
) ? 1 : 0;
7413 IPW_DEBUG_WX("GET Frag Threshold -> %d\n", wrqu
->frag
.value
);
7418 static int ipw2100_wx_set_retry(struct net_device
*dev
,
7419 struct iw_request_info
*info
,
7420 union iwreq_data
*wrqu
, char *extra
)
7422 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7425 if (wrqu
->retry
.flags
& IW_RETRY_LIFETIME
|| wrqu
->retry
.disabled
)
7428 if (!(wrqu
->retry
.flags
& IW_RETRY_LIMIT
))
7431 mutex_lock(&priv
->action_mutex
);
7432 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7437 if (wrqu
->retry
.flags
& IW_RETRY_SHORT
) {
7438 err
= ipw2100_set_short_retry(priv
, wrqu
->retry
.value
);
7439 IPW_DEBUG_WX("SET Short Retry Limit -> %d\n",
7444 if (wrqu
->retry
.flags
& IW_RETRY_LONG
) {
7445 err
= ipw2100_set_long_retry(priv
, wrqu
->retry
.value
);
7446 IPW_DEBUG_WX("SET Long Retry Limit -> %d\n",
7451 err
= ipw2100_set_short_retry(priv
, wrqu
->retry
.value
);
7453 err
= ipw2100_set_long_retry(priv
, wrqu
->retry
.value
);
7455 IPW_DEBUG_WX("SET Both Retry Limits -> %d\n", wrqu
->retry
.value
);
7458 mutex_unlock(&priv
->action_mutex
);
7462 static int ipw2100_wx_get_retry(struct net_device
*dev
,
7463 struct iw_request_info
*info
,
7464 union iwreq_data
*wrqu
, char *extra
)
7467 * This can be called at any time. No action lock required
7470 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7472 wrqu
->retry
.disabled
= 0; /* can't be disabled */
7474 if ((wrqu
->retry
.flags
& IW_RETRY_TYPE
) == IW_RETRY_LIFETIME
)
7477 if (wrqu
->retry
.flags
& IW_RETRY_LONG
) {
7478 wrqu
->retry
.flags
= IW_RETRY_LIMIT
| IW_RETRY_LONG
;
7479 wrqu
->retry
.value
= priv
->long_retry_limit
;
7482 (priv
->short_retry_limit
!=
7483 priv
->long_retry_limit
) ?
7484 IW_RETRY_LIMIT
| IW_RETRY_SHORT
: IW_RETRY_LIMIT
;
7486 wrqu
->retry
.value
= priv
->short_retry_limit
;
7489 IPW_DEBUG_WX("GET Retry -> %d\n", wrqu
->retry
.value
);
7494 static int ipw2100_wx_set_scan(struct net_device
*dev
,
7495 struct iw_request_info
*info
,
7496 union iwreq_data
*wrqu
, char *extra
)
7498 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7501 mutex_lock(&priv
->action_mutex
);
7502 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7507 IPW_DEBUG_WX("Initiating scan...\n");
7509 priv
->user_requested_scan
= 1;
7510 if (ipw2100_set_scan_options(priv
) || ipw2100_start_scan(priv
)) {
7511 IPW_DEBUG_WX("Start scan failed.\n");
7513 /* TODO: Mark a scan as pending so when hardware initialized
7518 mutex_unlock(&priv
->action_mutex
);
7522 static int ipw2100_wx_get_scan(struct net_device
*dev
,
7523 struct iw_request_info
*info
,
7524 union iwreq_data
*wrqu
, char *extra
)
7527 * This can be called at any time. No action lock required
7530 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7531 return libipw_wx_get_scan(priv
->ieee
, info
, wrqu
, extra
);
7535 * Implementation based on code in hostap-driver v0.1.3 hostap_ioctl.c
7537 static int ipw2100_wx_set_encode(struct net_device
*dev
,
7538 struct iw_request_info
*info
,
7539 union iwreq_data
*wrqu
, char *key
)
7542 * No check of STATUS_INITIALIZED required
7545 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7546 return libipw_wx_set_encode(priv
->ieee
, info
, wrqu
, key
);
7549 static int ipw2100_wx_get_encode(struct net_device
*dev
,
7550 struct iw_request_info
*info
,
7551 union iwreq_data
*wrqu
, char *key
)
7554 * This can be called at any time. No action lock required
7557 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7558 return libipw_wx_get_encode(priv
->ieee
, info
, wrqu
, key
);
7561 static int ipw2100_wx_set_power(struct net_device
*dev
,
7562 struct iw_request_info
*info
,
7563 union iwreq_data
*wrqu
, char *extra
)
7565 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7568 mutex_lock(&priv
->action_mutex
);
7569 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7574 if (wrqu
->power
.disabled
) {
7575 priv
->power_mode
= IPW_POWER_LEVEL(priv
->power_mode
);
7576 err
= ipw2100_set_power_mode(priv
, IPW_POWER_MODE_CAM
);
7577 IPW_DEBUG_WX("SET Power Management Mode -> off\n");
7581 switch (wrqu
->power
.flags
& IW_POWER_MODE
) {
7582 case IW_POWER_ON
: /* If not specified */
7583 case IW_POWER_MODE
: /* If set all mask */
7584 case IW_POWER_ALL_R
: /* If explicitly state all */
7586 default: /* Otherwise we don't support it */
7587 IPW_DEBUG_WX("SET PM Mode: %X not supported.\n",
7593 /* If the user hasn't specified a power management mode yet, default
7595 priv
->power_mode
= IPW_POWER_ENABLED
| priv
->power_mode
;
7596 err
= ipw2100_set_power_mode(priv
, IPW_POWER_LEVEL(priv
->power_mode
));
7598 IPW_DEBUG_WX("SET Power Management Mode -> 0x%02X\n", priv
->power_mode
);
7601 mutex_unlock(&priv
->action_mutex
);
7606 static int ipw2100_wx_get_power(struct net_device
*dev
,
7607 struct iw_request_info
*info
,
7608 union iwreq_data
*wrqu
, char *extra
)
7611 * This can be called at any time. No action lock required
7614 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7616 if (!(priv
->power_mode
& IPW_POWER_ENABLED
))
7617 wrqu
->power
.disabled
= 1;
7619 wrqu
->power
.disabled
= 0;
7620 wrqu
->power
.flags
= 0;
7623 IPW_DEBUG_WX("GET Power Management Mode -> %02X\n", priv
->power_mode
);
7633 static int ipw2100_wx_set_genie(struct net_device
*dev
,
7634 struct iw_request_info
*info
,
7635 union iwreq_data
*wrqu
, char *extra
)
7638 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7639 struct libipw_device
*ieee
= priv
->ieee
;
7642 if (!ieee
->wpa_enabled
)
7645 if (wrqu
->data
.length
> MAX_WPA_IE_LEN
||
7646 (wrqu
->data
.length
&& extra
== NULL
))
7649 if (wrqu
->data
.length
) {
7650 buf
= kmemdup(extra
, wrqu
->data
.length
, GFP_KERNEL
);
7654 kfree(ieee
->wpa_ie
);
7656 ieee
->wpa_ie_len
= wrqu
->data
.length
;
7658 kfree(ieee
->wpa_ie
);
7659 ieee
->wpa_ie
= NULL
;
7660 ieee
->wpa_ie_len
= 0;
7663 ipw2100_wpa_assoc_frame(priv
, ieee
->wpa_ie
, ieee
->wpa_ie_len
);
7669 static int ipw2100_wx_get_genie(struct net_device
*dev
,
7670 struct iw_request_info
*info
,
7671 union iwreq_data
*wrqu
, char *extra
)
7673 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7674 struct libipw_device
*ieee
= priv
->ieee
;
7676 if (ieee
->wpa_ie_len
== 0 || ieee
->wpa_ie
== NULL
) {
7677 wrqu
->data
.length
= 0;
7681 if (wrqu
->data
.length
< ieee
->wpa_ie_len
)
7684 wrqu
->data
.length
= ieee
->wpa_ie_len
;
7685 memcpy(extra
, ieee
->wpa_ie
, ieee
->wpa_ie_len
);
7691 static int ipw2100_wx_set_auth(struct net_device
*dev
,
7692 struct iw_request_info
*info
,
7693 union iwreq_data
*wrqu
, char *extra
)
7695 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7696 struct libipw_device
*ieee
= priv
->ieee
;
7697 struct iw_param
*param
= &wrqu
->param
;
7698 struct lib80211_crypt_data
*crypt
;
7699 unsigned long flags
;
7702 switch (param
->flags
& IW_AUTH_INDEX
) {
7703 case IW_AUTH_WPA_VERSION
:
7704 case IW_AUTH_CIPHER_PAIRWISE
:
7705 case IW_AUTH_CIPHER_GROUP
:
7706 case IW_AUTH_KEY_MGMT
:
7708 * ipw2200 does not use these parameters
7712 case IW_AUTH_TKIP_COUNTERMEASURES
:
7713 crypt
= priv
->ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
];
7714 if (!crypt
|| !crypt
->ops
->set_flags
|| !crypt
->ops
->get_flags
)
7717 flags
= crypt
->ops
->get_flags(crypt
->priv
);
7720 flags
|= IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
;
7722 flags
&= ~IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
;
7724 crypt
->ops
->set_flags(flags
, crypt
->priv
);
7728 case IW_AUTH_DROP_UNENCRYPTED
:{
7731 * wpa_supplicant calls set_wpa_enabled when the driver
7732 * is loaded and unloaded, regardless of if WPA is being
7733 * used. No other calls are made which can be used to
7734 * determine if encryption will be used or not prior to
7735 * association being expected. If encryption is not being
7736 * used, drop_unencrypted is set to false, else true -- we
7737 * can use this to determine if the CAP_PRIVACY_ON bit should
7740 struct libipw_security sec
= {
7741 .flags
= SEC_ENABLED
,
7742 .enabled
= param
->value
,
7744 priv
->ieee
->drop_unencrypted
= param
->value
;
7745 /* We only change SEC_LEVEL for open mode. Others
7746 * are set by ipw_wpa_set_encryption.
7748 if (!param
->value
) {
7749 sec
.flags
|= SEC_LEVEL
;
7750 sec
.level
= SEC_LEVEL_0
;
7752 sec
.flags
|= SEC_LEVEL
;
7753 sec
.level
= SEC_LEVEL_1
;
7755 if (priv
->ieee
->set_security
)
7756 priv
->ieee
->set_security(priv
->ieee
->dev
, &sec
);
7760 case IW_AUTH_80211_AUTH_ALG
:
7761 ret
= ipw2100_wpa_set_auth_algs(priv
, param
->value
);
7764 case IW_AUTH_WPA_ENABLED
:
7765 ret
= ipw2100_wpa_enable(priv
, param
->value
);
7768 case IW_AUTH_RX_UNENCRYPTED_EAPOL
:
7769 ieee
->ieee802_1x
= param
->value
;
7772 //case IW_AUTH_ROAMING_CONTROL:
7773 case IW_AUTH_PRIVACY_INVOKED
:
7774 ieee
->privacy_invoked
= param
->value
;
7784 static int ipw2100_wx_get_auth(struct net_device
*dev
,
7785 struct iw_request_info
*info
,
7786 union iwreq_data
*wrqu
, char *extra
)
7788 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7789 struct libipw_device
*ieee
= priv
->ieee
;
7790 struct lib80211_crypt_data
*crypt
;
7791 struct iw_param
*param
= &wrqu
->param
;
7794 switch (param
->flags
& IW_AUTH_INDEX
) {
7795 case IW_AUTH_WPA_VERSION
:
7796 case IW_AUTH_CIPHER_PAIRWISE
:
7797 case IW_AUTH_CIPHER_GROUP
:
7798 case IW_AUTH_KEY_MGMT
:
7800 * wpa_supplicant will control these internally
7805 case IW_AUTH_TKIP_COUNTERMEASURES
:
7806 crypt
= priv
->ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
];
7807 if (!crypt
|| !crypt
->ops
->get_flags
) {
7808 IPW_DEBUG_WARNING("Can't get TKIP countermeasures: "
7809 "crypt not set!\n");
7813 param
->value
= (crypt
->ops
->get_flags(crypt
->priv
) &
7814 IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
) ? 1 : 0;
7818 case IW_AUTH_DROP_UNENCRYPTED
:
7819 param
->value
= ieee
->drop_unencrypted
;
7822 case IW_AUTH_80211_AUTH_ALG
:
7823 param
->value
= priv
->ieee
->sec
.auth_mode
;
7826 case IW_AUTH_WPA_ENABLED
:
7827 param
->value
= ieee
->wpa_enabled
;
7830 case IW_AUTH_RX_UNENCRYPTED_EAPOL
:
7831 param
->value
= ieee
->ieee802_1x
;
7834 case IW_AUTH_ROAMING_CONTROL
:
7835 case IW_AUTH_PRIVACY_INVOKED
:
7836 param
->value
= ieee
->privacy_invoked
;
7845 /* SIOCSIWENCODEEXT */
7846 static int ipw2100_wx_set_encodeext(struct net_device
*dev
,
7847 struct iw_request_info
*info
,
7848 union iwreq_data
*wrqu
, char *extra
)
7850 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7851 return libipw_wx_set_encodeext(priv
->ieee
, info
, wrqu
, extra
);
7854 /* SIOCGIWENCODEEXT */
7855 static int ipw2100_wx_get_encodeext(struct net_device
*dev
,
7856 struct iw_request_info
*info
,
7857 union iwreq_data
*wrqu
, char *extra
)
7859 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7860 return libipw_wx_get_encodeext(priv
->ieee
, info
, wrqu
, extra
);
7864 static int ipw2100_wx_set_mlme(struct net_device
*dev
,
7865 struct iw_request_info
*info
,
7866 union iwreq_data
*wrqu
, char *extra
)
7868 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7869 struct iw_mlme
*mlme
= (struct iw_mlme
*)extra
;
7872 reason
= cpu_to_le16(mlme
->reason_code
);
7874 switch (mlme
->cmd
) {
7875 case IW_MLME_DEAUTH
:
7879 case IW_MLME_DISASSOC
:
7880 ipw2100_disassociate_bssid(priv
);
7894 #ifdef CONFIG_IPW2100_MONITOR
7895 static int ipw2100_wx_set_promisc(struct net_device
*dev
,
7896 struct iw_request_info
*info
,
7897 union iwreq_data
*wrqu
, char *extra
)
7899 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7900 int *parms
= (int *)extra
;
7901 int enable
= (parms
[0] > 0);
7904 mutex_lock(&priv
->action_mutex
);
7905 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7911 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
7912 err
= ipw2100_set_channel(priv
, parms
[1], 0);
7915 priv
->channel
= parms
[1];
7916 err
= ipw2100_switch_mode(priv
, IW_MODE_MONITOR
);
7918 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
7919 err
= ipw2100_switch_mode(priv
, priv
->last_mode
);
7922 mutex_unlock(&priv
->action_mutex
);
7926 static int ipw2100_wx_reset(struct net_device
*dev
,
7927 struct iw_request_info
*info
,
7928 union iwreq_data
*wrqu
, char *extra
)
7930 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7931 if (priv
->status
& STATUS_INITIALIZED
)
7932 schedule_reset(priv
);
7938 static int ipw2100_wx_set_powermode(struct net_device
*dev
,
7939 struct iw_request_info
*info
,
7940 union iwreq_data
*wrqu
, char *extra
)
7942 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7943 int err
= 0, mode
= *(int *)extra
;
7945 mutex_lock(&priv
->action_mutex
);
7946 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7951 if ((mode
< 0) || (mode
> POWER_MODES
))
7952 mode
= IPW_POWER_AUTO
;
7954 if (IPW_POWER_LEVEL(priv
->power_mode
) != mode
)
7955 err
= ipw2100_set_power_mode(priv
, mode
);
7957 mutex_unlock(&priv
->action_mutex
);
7961 #define MAX_POWER_STRING 80
7962 static int ipw2100_wx_get_powermode(struct net_device
*dev
,
7963 struct iw_request_info
*info
,
7964 union iwreq_data
*wrqu
, char *extra
)
7967 * This can be called at any time. No action lock required
7970 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7971 int level
= IPW_POWER_LEVEL(priv
->power_mode
);
7972 s32 timeout
, period
;
7974 if (!(priv
->power_mode
& IPW_POWER_ENABLED
)) {
7975 snprintf(extra
, MAX_POWER_STRING
,
7976 "Power save level: %d (Off)", level
);
7979 case IPW_POWER_MODE_CAM
:
7980 snprintf(extra
, MAX_POWER_STRING
,
7981 "Power save level: %d (None)", level
);
7983 case IPW_POWER_AUTO
:
7984 snprintf(extra
, MAX_POWER_STRING
,
7985 "Power save level: %d (Auto)", level
);
7988 timeout
= timeout_duration
[level
- 1] / 1000;
7989 period
= period_duration
[level
- 1] / 1000;
7990 snprintf(extra
, MAX_POWER_STRING
,
7991 "Power save level: %d "
7992 "(Timeout %dms, Period %dms)",
7993 level
, timeout
, period
);
7997 wrqu
->data
.length
= strlen(extra
) + 1;
8002 static int ipw2100_wx_set_preamble(struct net_device
*dev
,
8003 struct iw_request_info
*info
,
8004 union iwreq_data
*wrqu
, char *extra
)
8006 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8007 int err
, mode
= *(int *)extra
;
8009 mutex_lock(&priv
->action_mutex
);
8010 if (!(priv
->status
& STATUS_INITIALIZED
)) {
8016 priv
->config
|= CFG_LONG_PREAMBLE
;
8018 priv
->config
&= ~CFG_LONG_PREAMBLE
;
8024 err
= ipw2100_system_config(priv
, 0);
8027 mutex_unlock(&priv
->action_mutex
);
8031 static int ipw2100_wx_get_preamble(struct net_device
*dev
,
8032 struct iw_request_info
*info
,
8033 union iwreq_data
*wrqu
, char *extra
)
8036 * This can be called at any time. No action lock required
8039 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8041 if (priv
->config
& CFG_LONG_PREAMBLE
)
8042 snprintf(wrqu
->name
, IFNAMSIZ
, "long (1)");
8044 snprintf(wrqu
->name
, IFNAMSIZ
, "auto (0)");
8049 #ifdef CONFIG_IPW2100_MONITOR
8050 static int ipw2100_wx_set_crc_check(struct net_device
*dev
,
8051 struct iw_request_info
*info
,
8052 union iwreq_data
*wrqu
, char *extra
)
8054 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8055 int err
, mode
= *(int *)extra
;
8057 mutex_lock(&priv
->action_mutex
);
8058 if (!(priv
->status
& STATUS_INITIALIZED
)) {
8064 priv
->config
|= CFG_CRC_CHECK
;
8066 priv
->config
&= ~CFG_CRC_CHECK
;
8074 mutex_unlock(&priv
->action_mutex
);
8078 static int ipw2100_wx_get_crc_check(struct net_device
*dev
,
8079 struct iw_request_info
*info
,
8080 union iwreq_data
*wrqu
, char *extra
)
8083 * This can be called at any time. No action lock required
8086 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8088 if (priv
->config
& CFG_CRC_CHECK
)
8089 snprintf(wrqu
->name
, IFNAMSIZ
, "CRC checked (1)");
8091 snprintf(wrqu
->name
, IFNAMSIZ
, "CRC ignored (0)");
8095 #endif /* CONFIG_IPW2100_MONITOR */
8097 static iw_handler ipw2100_wx_handlers
[] = {
8098 IW_HANDLER(SIOCGIWNAME
, ipw2100_wx_get_name
),
8099 IW_HANDLER(SIOCSIWFREQ
, ipw2100_wx_set_freq
),
8100 IW_HANDLER(SIOCGIWFREQ
, ipw2100_wx_get_freq
),
8101 IW_HANDLER(SIOCSIWMODE
, ipw2100_wx_set_mode
),
8102 IW_HANDLER(SIOCGIWMODE
, ipw2100_wx_get_mode
),
8103 IW_HANDLER(SIOCGIWRANGE
, ipw2100_wx_get_range
),
8104 IW_HANDLER(SIOCSIWAP
, ipw2100_wx_set_wap
),
8105 IW_HANDLER(SIOCGIWAP
, ipw2100_wx_get_wap
),
8106 IW_HANDLER(SIOCSIWMLME
, ipw2100_wx_set_mlme
),
8107 IW_HANDLER(SIOCSIWSCAN
, ipw2100_wx_set_scan
),
8108 IW_HANDLER(SIOCGIWSCAN
, ipw2100_wx_get_scan
),
8109 IW_HANDLER(SIOCSIWESSID
, ipw2100_wx_set_essid
),
8110 IW_HANDLER(SIOCGIWESSID
, ipw2100_wx_get_essid
),
8111 IW_HANDLER(SIOCSIWNICKN
, ipw2100_wx_set_nick
),
8112 IW_HANDLER(SIOCGIWNICKN
, ipw2100_wx_get_nick
),
8113 IW_HANDLER(SIOCSIWRATE
, ipw2100_wx_set_rate
),
8114 IW_HANDLER(SIOCGIWRATE
, ipw2100_wx_get_rate
),
8115 IW_HANDLER(SIOCSIWRTS
, ipw2100_wx_set_rts
),
8116 IW_HANDLER(SIOCGIWRTS
, ipw2100_wx_get_rts
),
8117 IW_HANDLER(SIOCSIWFRAG
, ipw2100_wx_set_frag
),
8118 IW_HANDLER(SIOCGIWFRAG
, ipw2100_wx_get_frag
),
8119 IW_HANDLER(SIOCSIWTXPOW
, ipw2100_wx_set_txpow
),
8120 IW_HANDLER(SIOCGIWTXPOW
, ipw2100_wx_get_txpow
),
8121 IW_HANDLER(SIOCSIWRETRY
, ipw2100_wx_set_retry
),
8122 IW_HANDLER(SIOCGIWRETRY
, ipw2100_wx_get_retry
),
8123 IW_HANDLER(SIOCSIWENCODE
, ipw2100_wx_set_encode
),
8124 IW_HANDLER(SIOCGIWENCODE
, ipw2100_wx_get_encode
),
8125 IW_HANDLER(SIOCSIWPOWER
, ipw2100_wx_set_power
),
8126 IW_HANDLER(SIOCGIWPOWER
, ipw2100_wx_get_power
),
8127 IW_HANDLER(SIOCSIWGENIE
, ipw2100_wx_set_genie
),
8128 IW_HANDLER(SIOCGIWGENIE
, ipw2100_wx_get_genie
),
8129 IW_HANDLER(SIOCSIWAUTH
, ipw2100_wx_set_auth
),
8130 IW_HANDLER(SIOCGIWAUTH
, ipw2100_wx_get_auth
),
8131 IW_HANDLER(SIOCSIWENCODEEXT
, ipw2100_wx_set_encodeext
),
8132 IW_HANDLER(SIOCGIWENCODEEXT
, ipw2100_wx_get_encodeext
),
8135 #define IPW2100_PRIV_SET_MONITOR SIOCIWFIRSTPRIV
8136 #define IPW2100_PRIV_RESET SIOCIWFIRSTPRIV+1
8137 #define IPW2100_PRIV_SET_POWER SIOCIWFIRSTPRIV+2
8138 #define IPW2100_PRIV_GET_POWER SIOCIWFIRSTPRIV+3
8139 #define IPW2100_PRIV_SET_LONGPREAMBLE SIOCIWFIRSTPRIV+4
8140 #define IPW2100_PRIV_GET_LONGPREAMBLE SIOCIWFIRSTPRIV+5
8141 #define IPW2100_PRIV_SET_CRC_CHECK SIOCIWFIRSTPRIV+6
8142 #define IPW2100_PRIV_GET_CRC_CHECK SIOCIWFIRSTPRIV+7
8144 static const struct iw_priv_args ipw2100_private_args
[] = {
8146 #ifdef CONFIG_IPW2100_MONITOR
8148 IPW2100_PRIV_SET_MONITOR
,
8149 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 2, 0, "monitor"},
8152 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 0, 0, "reset"},
8153 #endif /* CONFIG_IPW2100_MONITOR */
8156 IPW2100_PRIV_SET_POWER
,
8157 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_power"},
8159 IPW2100_PRIV_GET_POWER
,
8160 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| MAX_POWER_STRING
,
8163 IPW2100_PRIV_SET_LONGPREAMBLE
,
8164 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_preamble"},
8166 IPW2100_PRIV_GET_LONGPREAMBLE
,
8167 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| IFNAMSIZ
, "get_preamble"},
8168 #ifdef CONFIG_IPW2100_MONITOR
8170 IPW2100_PRIV_SET_CRC_CHECK
,
8171 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_crc_check"},
8173 IPW2100_PRIV_GET_CRC_CHECK
,
8174 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| IFNAMSIZ
, "get_crc_check"},
8175 #endif /* CONFIG_IPW2100_MONITOR */
8178 static iw_handler ipw2100_private_handler
[] = {
8179 #ifdef CONFIG_IPW2100_MONITOR
8180 ipw2100_wx_set_promisc
,
8182 #else /* CONFIG_IPW2100_MONITOR */
8185 #endif /* CONFIG_IPW2100_MONITOR */
8186 ipw2100_wx_set_powermode
,
8187 ipw2100_wx_get_powermode
,
8188 ipw2100_wx_set_preamble
,
8189 ipw2100_wx_get_preamble
,
8190 #ifdef CONFIG_IPW2100_MONITOR
8191 ipw2100_wx_set_crc_check
,
8192 ipw2100_wx_get_crc_check
,
8193 #else /* CONFIG_IPW2100_MONITOR */
8196 #endif /* CONFIG_IPW2100_MONITOR */
8200 * Get wireless statistics.
8201 * Called by /proc/net/wireless
8202 * Also called by SIOCGIWSTATS
8204 static struct iw_statistics
*ipw2100_wx_wireless_stats(struct net_device
*dev
)
8219 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8220 struct iw_statistics
*wstats
;
8221 u32 rssi
, tx_retries
, missed_beacons
, tx_failures
;
8222 u32 ord_len
= sizeof(u32
);
8225 return (struct iw_statistics
*)NULL
;
8227 wstats
= &priv
->wstats
;
8229 /* if hw is disabled, then ipw2100_get_ordinal() can't be called.
8230 * ipw2100_wx_wireless_stats seems to be called before fw is
8231 * initialized. STATUS_ASSOCIATED will only be set if the hw is up
8232 * and associated; if not associcated, the values are all meaningless
8233 * anyway, so set them all to NULL and INVALID */
8234 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8235 wstats
->miss
.beacon
= 0;
8236 wstats
->discard
.retries
= 0;
8237 wstats
->qual
.qual
= 0;
8238 wstats
->qual
.level
= 0;
8239 wstats
->qual
.noise
= 0;
8240 wstats
->qual
.updated
= 7;
8241 wstats
->qual
.updated
|= IW_QUAL_NOISE_INVALID
|
8242 IW_QUAL_QUAL_INVALID
| IW_QUAL_LEVEL_INVALID
;
8246 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_PERCENT_MISSED_BCNS
,
8247 &missed_beacons
, &ord_len
))
8248 goto fail_get_ordinal
;
8250 /* If we don't have a connection the quality and level is 0 */
8251 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8252 wstats
->qual
.qual
= 0;
8253 wstats
->qual
.level
= 0;
8255 if (ipw2100_get_ordinal(priv
, IPW_ORD_RSSI_AVG_CURR
,
8257 goto fail_get_ordinal
;
8258 wstats
->qual
.level
= rssi
+ IPW2100_RSSI_TO_DBM
;
8260 rssi_qual
= rssi
* POOR
/ 10;
8262 rssi_qual
= (rssi
- 10) * (FAIR
- POOR
) / 5 + POOR
;
8264 rssi_qual
= (rssi
- 15) * (GOOD
- FAIR
) / 5 + FAIR
;
8266 rssi_qual
= (rssi
- 20) * (VERY_GOOD
- GOOD
) /
8269 rssi_qual
= (rssi
- 30) * (PERFECT
- VERY_GOOD
) /
8272 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_PERCENT_RETRIES
,
8273 &tx_retries
, &ord_len
))
8274 goto fail_get_ordinal
;
8276 if (tx_retries
> 75)
8277 tx_qual
= (90 - tx_retries
) * POOR
/ 15;
8278 else if (tx_retries
> 70)
8279 tx_qual
= (75 - tx_retries
) * (FAIR
- POOR
) / 5 + POOR
;
8280 else if (tx_retries
> 65)
8281 tx_qual
= (70 - tx_retries
) * (GOOD
- FAIR
) / 5 + FAIR
;
8282 else if (tx_retries
> 50)
8283 tx_qual
= (65 - tx_retries
) * (VERY_GOOD
- GOOD
) /
8286 tx_qual
= (50 - tx_retries
) *
8287 (PERFECT
- VERY_GOOD
) / 50 + VERY_GOOD
;
8289 if (missed_beacons
> 50)
8290 beacon_qual
= (60 - missed_beacons
) * POOR
/ 10;
8291 else if (missed_beacons
> 40)
8292 beacon_qual
= (50 - missed_beacons
) * (FAIR
- POOR
) /
8294 else if (missed_beacons
> 32)
8295 beacon_qual
= (40 - missed_beacons
) * (GOOD
- FAIR
) /
8297 else if (missed_beacons
> 20)
8298 beacon_qual
= (32 - missed_beacons
) *
8299 (VERY_GOOD
- GOOD
) / 20 + GOOD
;
8301 beacon_qual
= (20 - missed_beacons
) *
8302 (PERFECT
- VERY_GOOD
) / 20 + VERY_GOOD
;
8304 quality
= min(tx_qual
, rssi_qual
);
8305 quality
= min(beacon_qual
, quality
);
8307 #ifdef CONFIG_IPW2100_DEBUG
8308 if (beacon_qual
== quality
)
8309 IPW_DEBUG_WX("Quality clamped by Missed Beacons\n");
8310 else if (tx_qual
== quality
)
8311 IPW_DEBUG_WX("Quality clamped by Tx Retries\n");
8312 else if (quality
!= 100)
8313 IPW_DEBUG_WX("Quality clamped by Signal Strength\n");
8315 IPW_DEBUG_WX("Quality not clamped.\n");
8318 wstats
->qual
.qual
= quality
;
8319 wstats
->qual
.level
= rssi
+ IPW2100_RSSI_TO_DBM
;
8322 wstats
->qual
.noise
= 0;
8323 wstats
->qual
.updated
= 7;
8324 wstats
->qual
.updated
|= IW_QUAL_NOISE_INVALID
;
8326 /* FIXME: this is percent and not a # */
8327 wstats
->miss
.beacon
= missed_beacons
;
8329 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_TX_FAILURES
,
8330 &tx_failures
, &ord_len
))
8331 goto fail_get_ordinal
;
8332 wstats
->discard
.retries
= tx_failures
;
8337 IPW_DEBUG_WX("failed querying ordinals.\n");
8339 return (struct iw_statistics
*)NULL
;
8342 static struct iw_handler_def ipw2100_wx_handler_def
= {
8343 .standard
= ipw2100_wx_handlers
,
8344 .num_standard
= ARRAY_SIZE(ipw2100_wx_handlers
),
8345 .num_private
= ARRAY_SIZE(ipw2100_private_handler
),
8346 .num_private_args
= ARRAY_SIZE(ipw2100_private_args
),
8347 .private = (iw_handler
*) ipw2100_private_handler
,
8348 .private_args
= (struct iw_priv_args
*)ipw2100_private_args
,
8349 .get_wireless_stats
= ipw2100_wx_wireless_stats
,
8352 static void ipw2100_wx_event_work(struct work_struct
*work
)
8354 struct ipw2100_priv
*priv
=
8355 container_of(work
, struct ipw2100_priv
, wx_event_work
.work
);
8356 union iwreq_data wrqu
;
8357 unsigned int len
= ETH_ALEN
;
8359 if (priv
->status
& STATUS_STOPPING
)
8362 mutex_lock(&priv
->action_mutex
);
8364 IPW_DEBUG_WX("enter\n");
8366 mutex_unlock(&priv
->action_mutex
);
8368 wrqu
.ap_addr
.sa_family
= ARPHRD_ETHER
;
8370 /* Fetch BSSID from the hardware */
8371 if (!(priv
->status
& (STATUS_ASSOCIATING
| STATUS_ASSOCIATED
)) ||
8372 priv
->status
& STATUS_RF_KILL_MASK
||
8373 ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
,
8374 &priv
->bssid
, &len
)) {
8375 memset(wrqu
.ap_addr
.sa_data
, 0, ETH_ALEN
);
8377 /* We now have the BSSID, so can finish setting to the full
8378 * associated state */
8379 memcpy(wrqu
.ap_addr
.sa_data
, priv
->bssid
, ETH_ALEN
);
8380 memcpy(priv
->ieee
->bssid
, priv
->bssid
, ETH_ALEN
);
8381 priv
->status
&= ~STATUS_ASSOCIATING
;
8382 priv
->status
|= STATUS_ASSOCIATED
;
8383 netif_carrier_on(priv
->net_dev
);
8384 netif_wake_queue(priv
->net_dev
);
8387 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8388 IPW_DEBUG_WX("Configuring ESSID\n");
8389 mutex_lock(&priv
->action_mutex
);
8390 /* This is a disassociation event, so kick the firmware to
8391 * look for another AP */
8392 if (priv
->config
& CFG_STATIC_ESSID
)
8393 ipw2100_set_essid(priv
, priv
->essid
, priv
->essid_len
,
8396 ipw2100_set_essid(priv
, NULL
, 0, 0);
8397 mutex_unlock(&priv
->action_mutex
);
8400 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
8403 #define IPW2100_FW_MAJOR_VERSION 1
8404 #define IPW2100_FW_MINOR_VERSION 3
8406 #define IPW2100_FW_MINOR(x) ((x & 0xff) >> 8)
8407 #define IPW2100_FW_MAJOR(x) (x & 0xff)
8409 #define IPW2100_FW_VERSION ((IPW2100_FW_MINOR_VERSION << 8) | \
8410 IPW2100_FW_MAJOR_VERSION)
8412 #define IPW2100_FW_PREFIX "ipw2100-" __stringify(IPW2100_FW_MAJOR_VERSION) \
8413 "." __stringify(IPW2100_FW_MINOR_VERSION)
8415 #define IPW2100_FW_NAME(x) IPW2100_FW_PREFIX "" x ".fw"
8419 BINARY FIRMWARE HEADER FORMAT
8423 2 2 mode == 0:BSS,1:IBSS,2:MONITOR
8426 C fw_len firmware data
8427 12 + fw_len uc_len microcode data
8431 struct ipw2100_fw_header
{
8434 unsigned int fw_size
;
8435 unsigned int uc_size
;
8438 static int ipw2100_mod_firmware_load(struct ipw2100_fw
*fw
)
8440 struct ipw2100_fw_header
*h
=
8441 (struct ipw2100_fw_header
*)fw
->fw_entry
->data
;
8443 if (IPW2100_FW_MAJOR(h
->version
) != IPW2100_FW_MAJOR_VERSION
) {
8444 printk(KERN_WARNING DRV_NAME
": Firmware image not compatible "
8445 "(detected version id of %u). "
8446 "See Documentation/networking/README.ipw2100\n",
8451 fw
->version
= h
->version
;
8452 fw
->fw
.data
= fw
->fw_entry
->data
+ sizeof(struct ipw2100_fw_header
);
8453 fw
->fw
.size
= h
->fw_size
;
8454 fw
->uc
.data
= fw
->fw
.data
+ h
->fw_size
;
8455 fw
->uc
.size
= h
->uc_size
;
8460 static int ipw2100_get_firmware(struct ipw2100_priv
*priv
,
8461 struct ipw2100_fw
*fw
)
8466 IPW_DEBUG_INFO("%s: Using hotplug firmware load.\n",
8467 priv
->net_dev
->name
);
8469 switch (priv
->ieee
->iw_mode
) {
8471 fw_name
= IPW2100_FW_NAME("-i");
8473 #ifdef CONFIG_IPW2100_MONITOR
8474 case IW_MODE_MONITOR
:
8475 fw_name
= IPW2100_FW_NAME("-p");
8480 fw_name
= IPW2100_FW_NAME("");
8484 rc
= request_firmware(&fw
->fw_entry
, fw_name
, &priv
->pci_dev
->dev
);
8487 printk(KERN_ERR DRV_NAME
": "
8488 "%s: Firmware '%s' not available or load failed.\n",
8489 priv
->net_dev
->name
, fw_name
);
8492 IPW_DEBUG_INFO("firmware data %p size %zd\n", fw
->fw_entry
->data
,
8493 fw
->fw_entry
->size
);
8495 ipw2100_mod_firmware_load(fw
);
8500 MODULE_FIRMWARE(IPW2100_FW_NAME("-i"));
8501 #ifdef CONFIG_IPW2100_MONITOR
8502 MODULE_FIRMWARE(IPW2100_FW_NAME("-p"));
8504 MODULE_FIRMWARE(IPW2100_FW_NAME(""));
8506 static void ipw2100_release_firmware(struct ipw2100_priv
*priv
,
8507 struct ipw2100_fw
*fw
)
8510 release_firmware(fw
->fw_entry
);
8511 fw
->fw_entry
= NULL
;
8514 static int ipw2100_get_fwversion(struct ipw2100_priv
*priv
, char *buf
,
8517 char ver
[MAX_FW_VERSION_LEN
];
8518 u32 len
= MAX_FW_VERSION_LEN
;
8521 /* firmware version is an ascii string (max len of 14) */
8522 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_FW_VER_NUM
, ver
, &len
))
8527 for (i
= 0; i
< len
; i
++)
8533 static int ipw2100_get_ucodeversion(struct ipw2100_priv
*priv
, char *buf
,
8537 u32 len
= sizeof(ver
);
8538 /* microcode version is a 32 bit integer */
8539 if (ipw2100_get_ordinal(priv
, IPW_ORD_UCODE_VERSION
, &ver
, &len
))
8541 return snprintf(buf
, max
, "%08X", ver
);
8545 * On exit, the firmware will have been freed from the fw list
8547 static int ipw2100_fw_download(struct ipw2100_priv
*priv
, struct ipw2100_fw
*fw
)
8549 /* firmware is constructed of N contiguous entries, each entry is
8553 * 0 4 address to write to
8554 * 4 2 length of data run
8560 const unsigned char *firmware_data
= fw
->fw
.data
;
8561 unsigned int firmware_data_left
= fw
->fw
.size
;
8563 while (firmware_data_left
> 0) {
8564 addr
= *(u32
*) (firmware_data
);
8566 firmware_data_left
-= 4;
8568 len
= *(u16
*) (firmware_data
);
8570 firmware_data_left
-= 2;
8573 printk(KERN_ERR DRV_NAME
": "
8574 "Invalid firmware run-length of %d bytes\n",
8579 write_nic_memory(priv
->net_dev
, addr
, len
, firmware_data
);
8580 firmware_data
+= len
;
8581 firmware_data_left
-= len
;
8587 struct symbol_alive_response
{
8596 u16 clock_settle_time
; // 1us LSB
8597 u16 powerup_settle_time
; // 1us LSB
8598 u16 hop_settle_time
; // 1us LSB
8599 u8 date
[3]; // month, day, year
8600 u8 time
[2]; // hours, minutes
8604 static int ipw2100_ucode_download(struct ipw2100_priv
*priv
,
8605 struct ipw2100_fw
*fw
)
8607 struct net_device
*dev
= priv
->net_dev
;
8608 const unsigned char *microcode_data
= fw
->uc
.data
;
8609 unsigned int microcode_data_left
= fw
->uc
.size
;
8610 void __iomem
*reg
= priv
->ioaddr
;
8612 struct symbol_alive_response response
;
8616 /* Symbol control */
8617 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x703);
8619 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x707);
8623 write_nic_byte(dev
, 0x210014, 0x72); /* fifo width =16 */
8625 write_nic_byte(dev
, 0x210014, 0x72); /* fifo width =16 */
8628 /* EN_CS_ACCESS bit to reset control store pointer */
8629 write_nic_byte(dev
, 0x210000, 0x40);
8631 write_nic_byte(dev
, 0x210000, 0x0);
8633 write_nic_byte(dev
, 0x210000, 0x40);
8636 /* copy microcode from buffer into Symbol */
8638 while (microcode_data_left
> 0) {
8639 write_nic_byte(dev
, 0x210010, *microcode_data
++);
8640 write_nic_byte(dev
, 0x210010, *microcode_data
++);
8641 microcode_data_left
-= 2;
8644 /* EN_CS_ACCESS bit to reset the control store pointer */
8645 write_nic_byte(dev
, 0x210000, 0x0);
8648 /* Enable System (Reg 0)
8649 * first enable causes garbage in RX FIFO */
8650 write_nic_byte(dev
, 0x210000, 0x0);
8652 write_nic_byte(dev
, 0x210000, 0x80);
8655 /* Reset External Baseband Reg */
8656 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x703);
8658 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x707);
8661 /* HW Config (Reg 5) */
8662 write_nic_byte(dev
, 0x210014, 0x72); // fifo width =16
8664 write_nic_byte(dev
, 0x210014, 0x72); // fifo width =16
8667 /* Enable System (Reg 0)
8668 * second enable should be OK */
8669 write_nic_byte(dev
, 0x210000, 0x00); // clear enable system
8671 write_nic_byte(dev
, 0x210000, 0x80); // set enable system
8673 /* check Symbol is enabled - upped this from 5 as it wasn't always
8674 * catching the update */
8675 for (i
= 0; i
< 10; i
++) {
8678 /* check Dino is enabled bit */
8679 read_nic_byte(dev
, 0x210000, &data
);
8685 printk(KERN_ERR DRV_NAME
": %s: Error initializing Symbol\n",
8690 /* Get Symbol alive response */
8691 for (i
= 0; i
< 30; i
++) {
8692 /* Read alive response structure */
8694 j
< (sizeof(struct symbol_alive_response
) >> 1); j
++)
8695 read_nic_word(dev
, 0x210004, ((u16
*) & response
) + j
);
8697 if ((response
.cmd_id
== 1) && (response
.ucode_valid
== 0x1))
8703 printk(KERN_ERR DRV_NAME
8704 ": %s: No response from Symbol - hw not alive\n",
8706 printk_buf(IPW_DL_ERROR
, (u8
*) & response
, sizeof(response
));