Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
[deliverable/linux.git] / drivers / net / wireless / iwlwifi / Kconfig
1 config IWL4965
2 tristate "Intel Wireless WiFi 4965AGN"
3 depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
4 select FW_LOADER
5 ---help---
6 Select to build the driver supporting the:
7
8 Intel Wireless WiFi Link 4965AGN
9
10 This driver uses the kernel's mac80211 subsystem.
11
12 In order to use this driver, you will need a microcode (uCode)
13 image for it. You can obtain the microcode from:
14
15 <http://intellinuxwireless.org/>.
16
17 The microcode is typically installed in /lib/firmware. You can
18 look in the hotplug script /etc/hotplug/firmware.agent to
19 determine which directory FIRMWARE_DIR is set to when the script
20 runs.
21
22 If you want to compile the driver as a module ( = code which can be
23 inserted in and removed from the running kernel whenever you want),
24 say M here and read <file:Documentation/kbuild/modules.txt>. The
25 module will be called iwl4965.ko.
26
27 config IWL4965_QOS
28 bool "Enable Wireless QoS in iwl4965 driver"
29 depends on IWL4965
30 ---help---
31 This option will enable wireless quality of service (QoS) for the
32 iwl4965 driver.
33
34 config IWL4965_HT
35 bool "Enable 802.11n HT features in iwl4965 driver"
36 depends on EXPERIMENTAL
37 depends on IWL4965 && IWL4965_QOS
38 ---help---
39 This option enables IEEE 802.11n High Throughput features
40 for the iwl4965 driver.
41
42 config IWL4965_SPECTRUM_MEASUREMENT
43 bool "Enable Spectrum Measurement in iwl4965 driver"
44 depends on IWL4965
45 ---help---
46 This option will enable spectrum measurement for the iwl4965 driver.
47
48 config IWL4965_SENSITIVITY
49 bool "Enable Sensitivity Calibration in iwl4965 driver"
50 depends on IWL4965
51 ---help---
52 This option will enable sensitivity calibration for the iwl4965
53 driver.
54
55 config IWL4965_DEBUG
56 bool "Enable full debugging output in iwl4965 driver"
57 depends on IWL4965
58 ---help---
59 This option will enable debug tracing output for the iwl4965
60 driver.
61
62 This will result in the kernel module being ~100k larger. You can
63 control which debug output is sent to the kernel log by setting the
64 value in
65
66 /sys/bus/pci/drivers/${DRIVER}/debug_level
67
68 This entry will only exist if this option is enabled.
69
70 To set a value, simply echo an 8-byte hex value to the same file:
71
72 % echo 0x43fff > /sys/bus/pci/drivers/${DRIVER}/debug_level
73
74 You can find the list of debug mask values in:
75 drivers/net/wireless/iwlwifi/iwl-4965-debug.h
76
77 If this is your first time using this driver, you should say Y here
78 as the debug information can assist others in helping you resolve
79 any problems you may encounter.
80
81 config IWL3945
82 tristate "Intel PRO/Wireless 3945ABG/BG Network Connection"
83 depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
84 select FW_LOADER
85 ---help---
86 Select to build the driver supporting the:
87
88 Intel PRO/Wireless 3945ABG/BG Network Connection
89
90 This driver uses the kernel's mac80211 subsystem.
91
92 In order to use this driver, you will need a microcode (uCode)
93 image for it. You can obtain the microcode from:
94
95 <http://intellinuxwireless.org/>.
96
97 The microcode is typically installed in /lib/firmware. You can
98 look in the hotplug script /etc/hotplug/firmware.agent to
99 determine which directory FIRMWARE_DIR is set to when the script
100 runs.
101
102 If you want to compile the driver as a module ( = code which can be
103 inserted in and removed from the running kernel whenever you want),
104 say M here and read <file:Documentation/kbuild/modules.txt>. The
105 module will be called iwl3945.ko.
106
107 config IWL3945_QOS
108 bool "Enable Wireless QoS in iwl3945 driver"
109 depends on IWL3945
110 ---help---
111 This option will enable wireless quality of service (QoS) for the
112 iwl3945 driver.
113
114 config IWL3945_SPECTRUM_MEASUREMENT
115 bool "Enable Spectrum Measurement in iwl3945 drivers"
116 depends on IWL3945
117 ---help---
118 This option will enable spectrum measurement for the iwl3945 driver.
119
120 config IWL3945_DEBUG
121 bool "Enable full debugging output in iwl3945 driver"
122 depends on IWL3945
123 ---help---
124 This option will enable debug tracing output for the iwl3945
125 driver.
126
127 This will result in the kernel module being ~100k larger. You can
128 control which debug output is sent to the kernel log by setting the
129 value in
130
131 /sys/bus/pci/drivers/${DRIVER}/debug_level
132
133 This entry will only exist if this option is enabled.
134
135 To set a value, simply echo an 8-byte hex value to the same file:
136
137 % echo 0x43fff > /sys/bus/pci/drivers/${DRIVER}/debug_level
138
139 You can find the list of debug mask values in:
140 drivers/net/wireless/iwlwifi/iwl-3945-debug.h
141
142 If this is your first time using this driver, you should say Y here
143 as the debug information can assist others in helping you resolve
144 any problems you may encounter.
145
This page took 0.035129 seconds and 6 git commands to generate.