drivers/net/wireless/iwlwifi/Kconfig

   1 config IWLWIFI
   2         bool
   3         default n
   4
   5 config IWLCORE
   6         tristate "Intel Wireless Wifi Core"
   7         depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
   8         select IWLWIFI
   9
  10 config IWLWIFI_LEDS
  11         bool
  12         default n
  13
  14 config IWLWIFI_RFKILL
  15         boolean "IWLWIFI RF kill support"
  16         depends on IWLCORE
  17         select RFKILL
  18         select RFKILL_INPUT
  19
  20 config IWL4965
  21         tristate "Intel Wireless WiFi 4965AGN"
  22         depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
  23         select FW_LOADER
  24         select IWLCORE
  25         ---help---
  26           Select to build the driver supporting the:
  27
  28           Intel Wireless WiFi Link 4965AGN
  29
  30           This driver uses the kernel's mac80211 subsystem.
  31
  32           In order to use this driver, you will need a microcode (uCode)
  33           image for it. You can obtain the microcode from:
  34
  35                   <http://intellinuxwireless.org/>.
  36
  37           The microcode is typically installed in /lib/firmware. You can
  38           look in the hotplug script /etc/hotplug/firmware.agent to
  39           determine which directory FIRMWARE_DIR is set to when the script
  40           runs.
  41
  42           If you want to compile the driver as a module ( = code which can be
  43           inserted in and removed from the running kernel whenever you want),
  44           say M here and read <file:Documentation/kbuild/modules.txt>.  The
  45           module will be called iwl4965.ko.
  46
  47 config IWL4965_HT
  48         bool "Enable 802.11n HT features in iwl4965 driver"
  49         depends on EXPERIMENTAL
  50         depends on IWL4965
  51         ---help---
  52           This option enables IEEE 802.11n High Throughput features
  53           for the iwl4965 driver.
  54
  55 config IWL4965_LEDS
  56         bool "Enable LEDS features in iwl4965 driver"
  57         depends on IWL4965
  58         select MAC80211_LEDS
  59         select LEDS_CLASS
  60         select IWLWIFI_LEDS
  61         ---help---
  62           This option enables LEDS for the iwlwifi drivers
  63
  64
  65 config IWL4965_SPECTRUM_MEASUREMENT
  66         bool "Enable Spectrum Measurement in iwl4965 driver"
  67         depends on IWL4965
  68         ---help---
  69           This option will enable spectrum measurement for the iwl4965 driver.
  70
  71 config IWL4965_SENSITIVITY
  72         bool "Enable Sensitivity Calibration in iwl4965 driver"
  73         depends on IWL4965
  74         ---help---
  75           This option will enable sensitivity calibration for the iwl4965
  76           driver.
  77
  78 config IWLWIFI_DEBUG
  79         bool "Enable full debugging output in iwl4965 driver"
  80         depends on IWL4965
  81         ---help---
  82           This option will enable debug tracing output for the iwl4965
  83           driver.
  84
  85           This will result in the kernel module being ~100k larger.  You can
  86           control which debug output is sent to the kernel log by setting the
  87           value in
  88
  89                   /sys/bus/pci/drivers/${DRIVER}/debug_level
  90
  91           This entry will only exist if this option is enabled.
  92
  93           To set a value, simply echo an 8-byte hex value to the same file:
  94
  95                   % echo 0x43fff > /sys/bus/pci/drivers/${DRIVER}/debug_level
  96
  97           You can find the list of debug mask values in:
  98                   drivers/net/wireless/iwlwifi/iwl-4965-debug.h
  99
 100           If this is your first time using this driver, you should say Y here
 101           as the debug information can assist others in helping you resolve
 102           any problems you may encounter.
 103
 104 config IWLWIFI_DEBUGFS
 105         bool "Iwlwifi debugfs support"
 106         depends on IWLCORE && IWLWIFI_DEBUG && MAC80211_DEBUGFS
 107         ---help---
 108           Enable creation of debugfs files for the iwlwifi drivers.
 109
 110 config IWL3945
 111         tristate "Intel PRO/Wireless 3945ABG/BG Network Connection"
 112         depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
 113         select FW_LOADER
 114         select IWLWIFI
 115         ---help---
 116           Select to build the driver supporting the:
 117
 118           Intel PRO/Wireless 3945ABG/BG Network Connection
 119
 120           This driver uses the kernel's mac80211 subsystem.
 121
 122           In order to use this driver, you will need a microcode (uCode)
 123           image for it. You can obtain the microcode from:
 124
 125                   <http://intellinuxwireless.org/>.
 126
 127           The microcode is typically installed in /lib/firmware. You can
 128           look in the hotplug script /etc/hotplug/firmware.agent to
 129           determine which directory FIRMWARE_DIR is set to when the script
 130           runs.
 131
 132           If you want to compile the driver as a module ( = code which can be
 133           inserted in and removed from the running kernel whenever you want),
 134           say M here and read <file:Documentation/kbuild/modules.txt>.  The
 135           module will be called iwl3945.ko.
 136
 137 config IWL3945_SPECTRUM_MEASUREMENT
 138         bool "Enable Spectrum Measurement in iwl3945 drivers"
 139         depends on IWL3945
 140         ---help---
 141           This option will enable spectrum measurement for the iwl3945 driver.
 142
 143 config IWL3945_LEDS
 144         bool "Enable LEDS features in iwl3945 driver"
 145         depends on IWL3945
 146         select MAC80211_LEDS
 147         select LEDS_CLASS
 148         ---help---
 149           This option enables LEDS for the iwl3945 driver.
 150
 151 config IWL3945_DEBUG
 152         bool "Enable full debugging output in iwl3945 driver"
 153         depends on IWL3945
 154         ---help---
 155           This option will enable debug tracing output for the iwl3945
 156           driver.
 157
 158           This will result in the kernel module being ~100k larger.  You can
 159           control which debug output is sent to the kernel log by setting the
 160           value in
 161
 162                   /sys/bus/pci/drivers/${DRIVER}/debug_level
 163
 164           This entry will only exist if this option is enabled.
 165
 166           To set a value, simply echo an 8-byte hex value to the same file:
 167
 168                   % echo 0x43fff > /sys/bus/pci/drivers/${DRIVER}/debug_level
 169
 170           You can find the list of debug mask values in:
 171                   drivers/net/wireless/iwlwifi/iwl-3945-debug.h
 172
 173           If this is your first time using this driver, you should say Y here
 174           as the debug information can assist others in helping you resolve
 175           any problems you may encounter.
 176