drivers/net/wireless/iwlwifi/Kconfig

   1 config IWLCORE
   2         tristate "Intel Wireless Wifi Core"
   3         depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
   4
   5 config IWL4965
   6         tristate "Intel Wireless WiFi 4965AGN"
   7         depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
   8         select FW_LOADER
   9         select IWLCORE
  10         ---help---
  11           Select to build the driver supporting the:
  12
  13           Intel Wireless WiFi Link 4965AGN
  14
  15           This driver uses the kernel's mac80211 subsystem.
  16
  17           In order to use this driver, you will need a microcode (uCode)
  18           image for it. You can obtain the microcode from:
  19
  20                   <http://intellinuxwireless.org/>.
  21
  22           The microcode is typically installed in /lib/firmware. You can
  23           look in the hotplug script /etc/hotplug/firmware.agent to
  24           determine which directory FIRMWARE_DIR is set to when the script
  25           runs.
  26
  27           If you want to compile the driver as a module ( = code which can be
  28           inserted in and remvoed from the running kernel whenever you want),
  29           say M here and read <file:Documentation/kbuild/modules.txt>.  The
  30           module will be called iwl4965.ko.
  31
  32 config IWL4965_HT
  33         bool "Enable 802.11n HT features in iwl4965 driver"
  34         depends on EXPERIMENTAL
  35         depends on IWL4965
  36         ---help---
  37           This option enables IEEE 802.11n High Throughput features
  38           for the iwl4965 driver.
  39
  40 config IWL4965_SPECTRUM_MEASUREMENT
  41         bool "Enable Spectrum Measurement in iwl4965 driver"
  42         depends on IWL4965
  43         ---help---
  44           This option will enable spectrum measurement for the iwl4965 driver.
  45
  46 config IWL4965_SENSITIVITY
  47         bool "Enable Sensitivity Calibration in iwl4965 driver"
  48         depends on IWL4965
  49         ---help---
  50           This option will enable sensitivity calibration for the iwl4965
  51           driver.
  52
  53 config IWLWIFI_DEBUG
  54         bool "Enable full debugging output in iwl4965 driver"
  55         depends on IWL4965
  56         ---help---
  57           This option will enable debug tracing output for the iwl4965
  58           driver.
  59
  60           This will result in the kernel module being ~100k larger.  You can
  61           control which debug output is sent to the kernel log by setting the
  62           value in
  63
  64                   /sys/bus/pci/drivers/${DRIVER}/debug_level
  65
  66           This entry will only exist if this option is enabled.
  67
  68           To set a value, simply echo an 8-byte hex value to the same file:
  69
  70                   % echo 0x43fff > /sys/bus/pci/drivers/${DRIVER}/debug_level
  71
  72           You can find the list of debug mask values in:
  73                   drivers/net/wireless/iwlwifi/iwl-4965-debug.h
  74
  75           If this is your first time using this driver, you should say Y here
  76           as the debug information can assist others in helping you resolve
  77           any problems you may encounter.
  78
  79 config IWLWIFI_DEBUGFS
  80         bool "Iwlwifi debugfs support"
  81         depends on IWLCORE && IWLWIFI_DEBUG && MAC80211_DEBUGFS
  82         ---help---
  83           Enable creation of debugfs files for the iwlwifi drivers.
  84
  85 config IWL3945
  86         tristate "Intel PRO/Wireless 3945ABG/BG Network Connection"
  87         depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
  88         select FW_LOADER
  89         ---help---
  90           Select to build the driver supporting the:
  91
  92           Intel PRO/Wireless 3945ABG/BG Network Connection
  93
  94           This driver uses the kernel's mac80211 subsystem.
  95
  96           In order to use this driver, you will need a microcode (uCode)
  97           image for it. You can obtain the microcode from:
  98
  99                   <http://intellinuxwireless.org/>.
 100
 101           The microcode is typically installed in /lib/firmware. You can
 102           look in the hotplug script /etc/hotplug/firmware.agent to
 103           determine which directory FIRMWARE_DIR is set to when the script
 104           runs.
 105
 106           If you want to compile the driver as a module ( = code which can be
 107           inserted in and remvoed from the running kernel whenever you want),
 108           say M here and read <file:Documentation/kbuild/modules.txt>.  The
 109           module will be called iwl3945.ko.
 110
 111 config IWL3945_SPECTRUM_MEASUREMENT
 112         bool "Enable Spectrum Measurement in iwl3945 drivers"
 113         depends on IWL3945
 114         ---help---
 115           This option will enable spectrum measurement for the iwl3945 driver.
 116
 117 config IWL3945_DEBUG
 118         bool "Enable full debugging output in iwl3945 driver"
 119         depends on IWL3945
 120         ---help---
 121           This option will enable debug tracing output for the iwl3945
 122           driver.
 123
 124           This will result in the kernel module being ~100k larger.  You can
 125           control which debug output is sent to the kernel log by setting the
 126           value in
 127
 128                   /sys/bus/pci/drivers/${DRIVER}/debug_level
 129
 130           This entry will only exist if this option is enabled.
 131
 132           To set a value, simply echo an 8-byte hex value to the same file:
 133
 134                   % echo 0x43fff > /sys/bus/pci/drivers/${DRIVER}/debug_level
 135
 136           You can find the list of debug mask values in:
 137                   drivers/net/wireless/iwlwifi/iwl-3945-debug.h
 138
 139           If this is your first time using this driver, you should say Y here
 140           as the debug information can assist others in helping you resolve
 141           any problems you may encounter.
 142