drivers/net/wireless/iwlwifi/Kconfig

   1 config IWLCORE
   2         tristate "Intel Wireless Wifi Core"
   3         depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
   4
   5 config IWL4965
   6         tristate "Intel Wireless WiFi 4965AGN"
   7         depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
   8         select FW_LOADER
   9         select IWLCORE
  10         ---help---
  11           Select to build the driver supporting the:
  12
  13           Intel Wireless WiFi Link 4965AGN
  14
  15           This driver uses the kernel's mac80211 subsystem.
  16
  17           In order to use this driver, you will need a microcode (uCode)
  18           image for it. You can obtain the microcode from:
  19
  20                   <http://intellinuxwireless.org/>.
  21
  22           The microcode is typically installed in /lib/firmware. You can
  23           look in the hotplug script /etc/hotplug/firmware.agent to
  24           determine which directory FIRMWARE_DIR is set to when the script
  25           runs.
  26
  27           If you want to compile the driver as a module ( = code which can be
  28           inserted in and remvoed from the running kernel whenever you want),
  29           say M here and read <file:Documentation/kbuild/modules.txt>.  The
  30           module will be called iwl4965.ko.
  31
  32 config IWL4965_HT
  33         bool "Enable 802.11n HT features in iwl4965 driver"
  34         depends on EXPERIMENTAL
  35         depends on IWL4965
  36         ---help---
  37           This option enables IEEE 802.11n High Throughput features
  38           for the iwl4965 driver.
  39
  40 config IWL4965_SPECTRUM_MEASUREMENT
  41         bool "Enable Spectrum Measurement in iwl4965 driver"
  42         depends on IWL4965
  43         ---help---
  44           This option will enable spectrum measurement for the iwl4965 driver.
  45
  46 config IWL4965_SENSITIVITY
  47         bool "Enable Sensitivity Calibration in iwl4965 driver"
  48         depends on IWL4965
  49         ---help---
  50           This option will enable sensitivity calibration for the iwl4965
  51           driver.
  52
  53 config IWL4965_DEBUG
  54         bool "Enable full debugging output in iwl4965 driver"
  55         depends on IWL4965
  56         ---help---
  57           This option will enable debug tracing output for the iwl4965
  58           driver.
  59
  60           This will result in the kernel module being ~100k larger.  You can
  61           control which debug output is sent to the kernel log by setting the
  62           value in
  63
  64                   /sys/bus/pci/drivers/${DRIVER}/debug_level
  65
  66           This entry will only exist if this option is enabled.
  67
  68           To set a value, simply echo an 8-byte hex value to the same file:
  69
  70                   % echo 0x43fff > /sys/bus/pci/drivers/${DRIVER}/debug_level
  71
  72           You can find the list of debug mask values in:
  73                   drivers/net/wireless/iwlwifi/iwl-4965-debug.h
  74
  75           If this is your first time using this driver, you should say Y here
  76           as the debug information can assist others in helping you resolve
  77           any problems you may encounter.
  78
  79 config IWL3945
  80         tristate "Intel PRO/Wireless 3945ABG/BG Network Connection"
  81         depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
  82         select FW_LOADER
  83         ---help---
  84           Select to build the driver supporting the:
  85
  86           Intel PRO/Wireless 3945ABG/BG Network Connection
  87
  88           This driver uses the kernel's mac80211 subsystem.
  89
  90           In order to use this driver, you will need a microcode (uCode)
  91           image for it. You can obtain the microcode from:
  92
  93                   <http://intellinuxwireless.org/>.
  94
  95           The microcode is typically installed in /lib/firmware. You can
  96           look in the hotplug script /etc/hotplug/firmware.agent to
  97           determine which directory FIRMWARE_DIR is set to when the script
  98           runs.
  99
 100           If you want to compile the driver as a module ( = code which can be
 101           inserted in and remvoed from the running kernel whenever you want),
 102           say M here and read <file:Documentation/kbuild/modules.txt>.  The
 103           module will be called iwl3945.ko.
 104
 105 config IWL3945_SPECTRUM_MEASUREMENT
 106         bool "Enable Spectrum Measurement in iwl3945 drivers"
 107         depends on IWL3945
 108         ---help---
 109           This option will enable spectrum measurement for the iwl3945 driver.
 110
 111 config IWL3945_DEBUG
 112         bool "Enable full debugging output in iwl3945 driver"
 113         depends on IWL3945
 114         ---help---
 115           This option will enable debug tracing output for the iwl3945
 116           driver.
 117
 118           This will result in the kernel module being ~100k larger.  You can
 119           control which debug output is sent to the kernel log by setting the
 120           value in
 121
 122                   /sys/bus/pci/drivers/${DRIVER}/debug_level
 123
 124           This entry will only exist if this option is enabled.
 125
 126           To set a value, simply echo an 8-byte hex value to the same file:
 127
 128                   % echo 0x43fff > /sys/bus/pci/drivers/${DRIVER}/debug_level
 129
 130           You can find the list of debug mask values in:
 131                   drivers/net/wireless/iwlwifi/iwl-3945-debug.h
 132
 133           If this is your first time using this driver, you should say Y here
 134           as the debug information can assist others in helping you resolve
 135           any problems you may encounter.
 136