drivers/net/wireless/iwlwifi/Kconfig

   1 config IWLCORE
   2         tristate "Intel Wireless Wifi Core"
   3         depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
   4
   5 config IWLWIFI_LEDS
   6         bool "Enable LEDS features in iwlwifi driver"
   7         depends on IWLCORE && MAC80211_LEDS && LEDS_CLASS
   8         ---help---
   9           This option enables LEDS for the iwlwifi drivers
  10
  11
  12 config IWLCORE_RFKILL
  13         boolean "IWLWIFI RF kill support"
  14         depends on IWLCORE
  15         select RFKILL
  16         select RFKILL_INPUT
  17
  18 config IWL4965
  19         tristate "Intel Wireless WiFi 4965AGN"
  20         depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
  21         select FW_LOADER
  22         select IWLCORE
  23         ---help---
  24           Select to build the driver supporting the:
  25
  26           Intel Wireless WiFi Link 4965AGN
  27
  28           This driver uses the kernel's mac80211 subsystem.
  29
  30           In order to use this driver, you will need a microcode (uCode)
  31           image for it. You can obtain the microcode from:
  32
  33                   <http://intellinuxwireless.org/>.
  34
  35           The microcode is typically installed in /lib/firmware. You can
  36           look in the hotplug script /etc/hotplug/firmware.agent to
  37           determine which directory FIRMWARE_DIR is set to when the script
  38           runs.
  39
  40           If you want to compile the driver as a module ( = code which can be
  41           inserted in and removed from the running kernel whenever you want),
  42           say M here and read <file:Documentation/kbuild/modules.txt>.  The
  43           module will be called iwl4965.ko.
  44
  45 config IWL4965_HT
  46         bool "Enable 802.11n HT features in iwl4965 driver"
  47         depends on EXPERIMENTAL
  48         depends on IWL4965
  49         ---help---
  50           This option enables IEEE 802.11n High Throughput features
  51           for the iwl4965 driver.
  52
  53 config IWL4965_LEDS
  54         bool "Enable LEDS features in iwl4965 driver"
  55         depends on IWL4965 && IWLWIFI_LEDS
  56         ---help---
  57           This option enables LEDS for the iwlwifi drivers
  58
  59
  60 config IWL4965_SPECTRUM_MEASUREMENT
  61         bool "Enable Spectrum Measurement in iwl4965 driver"
  62         depends on IWL4965
  63         ---help---
  64           This option will enable spectrum measurement for the iwl4965 driver.
  65
  66 config IWL4965_SENSITIVITY
  67         bool "Enable Sensitivity Calibration in iwl4965 driver"
  68         depends on IWL4965
  69         ---help---
  70           This option will enable sensitivity calibration for the iwl4965
  71           driver.
  72
  73 config IWLWIFI_DEBUG
  74         bool "Enable full debugging output in iwl4965 driver"
  75         depends on IWL4965
  76         ---help---
  77           This option will enable debug tracing output for the iwl4965
  78           driver.
  79
  80           This will result in the kernel module being ~100k larger.  You can
  81           control which debug output is sent to the kernel log by setting the
  82           value in
  83
  84                   /sys/bus/pci/drivers/${DRIVER}/debug_level
  85
  86           This entry will only exist if this option is enabled.
  87
  88           To set a value, simply echo an 8-byte hex value to the same file:
  89
  90                   % echo 0x43fff > /sys/bus/pci/drivers/${DRIVER}/debug_level
  91
  92           You can find the list of debug mask values in:
  93                   drivers/net/wireless/iwlwifi/iwl-4965-debug.h
  94
  95           If this is your first time using this driver, you should say Y here
  96           as the debug information can assist others in helping you resolve
  97           any problems you may encounter.
  98
  99 config IWLWIFI_DEBUGFS
 100         bool "Iwlwifi debugfs support"
 101         depends on IWLCORE && IWLWIFI_DEBUG && MAC80211_DEBUGFS
 102         ---help---
 103           Enable creation of debugfs files for the iwlwifi drivers.
 104
 105 config IWL3945
 106         tristate "Intel PRO/Wireless 3945ABG/BG Network Connection"
 107         depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
 108         select FW_LOADER
 109         ---help---
 110           Select to build the driver supporting the:
 111
 112           Intel PRO/Wireless 3945ABG/BG Network Connection
 113
 114           This driver uses the kernel's mac80211 subsystem.
 115
 116           In order to use this driver, you will need a microcode (uCode)
 117           image for it. You can obtain the microcode from:
 118
 119                   <http://intellinuxwireless.org/>.
 120
 121           The microcode is typically installed in /lib/firmware. You can
 122           look in the hotplug script /etc/hotplug/firmware.agent to
 123           determine which directory FIRMWARE_DIR is set to when the script
 124           runs.
 125
 126           If you want to compile the driver as a module ( = code which can be
 127           inserted in and removed from the running kernel whenever you want),
 128           say M here and read <file:Documentation/kbuild/modules.txt>.  The
 129           module will be called iwl3945.ko.
 130
 131 config IWL3945_SPECTRUM_MEASUREMENT
 132         bool "Enable Spectrum Measurement in iwl3945 drivers"
 133         depends on IWL3945
 134         ---help---
 135           This option will enable spectrum measurement for the iwl3945 driver.
 136
 137 config IWL3945_LEDS
 138         bool "Enable LEDS features in iwl3945 driver"
 139         depends on IWL3945 && MAC80211_LEDS && LEDS_CLASS
 140         ---help---
 141           This option enables LEDS for the iwl3945 driver.
 142
 143 config IWL3945_DEBUG
 144         bool "Enable full debugging output in iwl3945 driver"
 145         depends on IWL3945
 146         ---help---
 147           This option will enable debug tracing output for the iwl3945
 148           driver.
 149
 150           This will result in the kernel module being ~100k larger.  You can
 151           control which debug output is sent to the kernel log by setting the
 152           value in
 153
 154                   /sys/bus/pci/drivers/${DRIVER}/debug_level
 155
 156           This entry will only exist if this option is enabled.
 157
 158           To set a value, simply echo an 8-byte hex value to the same file:
 159
 160                   % echo 0x43fff > /sys/bus/pci/drivers/${DRIVER}/debug_level
 161
 162           You can find the list of debug mask values in:
 163                   drivers/net/wireless/iwlwifi/iwl-3945-debug.h
 164
 165           If this is your first time using this driver, you should say Y here
 166           as the debug information can assist others in helping you resolve
 167           any problems you may encounter.
 168