1 /******************************************************************************
3 * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
21 * Contact Information:
22 * James P. Ketrenos <ipw2100-admin@linux.intel.com>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 *****************************************************************************/
27 #include <linux/kernel.h>
28 #include <linux/module.h>
29 #include <linux/init.h>
30 #include <linux/pci.h>
31 #include <linux/dma-mapping.h>
32 #include <linux/delay.h>
33 #include <linux/skbuff.h>
34 #include <linux/netdevice.h>
35 #include <linux/wireless.h>
36 #include <linux/firmware.h>
37 #include <linux/etherdevice.h>
38 #include <asm/unaligned.h>
39 #include <net/mac80211.h>
41 #include "iwl-3945-core.h"
43 #include "iwl-helpers.h"
44 #include "iwl-3945-rs.h"
46 #define IWL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np) \
47 [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \
48 IWL_RATE_##r##M_IEEE, \
49 IWL_RATE_##ip##M_INDEX, \
50 IWL_RATE_##in##M_INDEX, \
51 IWL_RATE_##rp##M_INDEX, \
52 IWL_RATE_##rn##M_INDEX, \
53 IWL_RATE_##pp##M_INDEX, \
54 IWL_RATE_##np##M_INDEX, \
55 IWL_RATE_##r##M_INDEX_TABLE, \
56 IWL_RATE_##ip##M_INDEX_TABLE }
60 * rate, prev rate, next rate, prev tgg rate, next tgg rate
62 * If there isn't a valid next or previous rate then INV is used which
63 * maps to IWL_RATE_INVALID
66 const struct iwl3945_rate_info iwl3945_rates
[IWL_RATE_COUNT
] = {
67 IWL_DECLARE_RATE_INFO(1, INV
, 2, INV
, 2, INV
, 2), /* 1mbps */
68 IWL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5), /* 2mbps */
69 IWL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11), /*5.5mbps */
70 IWL_DECLARE_RATE_INFO(11, 9, 12, 5, 12, 5, 18), /* 11mbps */
71 IWL_DECLARE_RATE_INFO(6, 5, 9, 5, 11, 5, 11), /* 6mbps */
72 IWL_DECLARE_RATE_INFO(9, 6, 11, 5, 11, 5, 11), /* 9mbps */
73 IWL_DECLARE_RATE_INFO(12, 11, 18, 11, 18, 11, 18), /* 12mbps */
74 IWL_DECLARE_RATE_INFO(18, 12, 24, 12, 24, 11, 24), /* 18mbps */
75 IWL_DECLARE_RATE_INFO(24, 18, 36, 18, 36, 18, 36), /* 24mbps */
76 IWL_DECLARE_RATE_INFO(36, 24, 48, 24, 48, 24, 48), /* 36mbps */
77 IWL_DECLARE_RATE_INFO(48, 36, 54, 36, 54, 36, 54), /* 48mbps */
78 IWL_DECLARE_RATE_INFO(54, 48, INV
, 48, INV
, 48, INV
),/* 54mbps */
81 /* 1 = enable the iwl3945_disable_events() function */
82 #define IWL_EVT_DISABLE (0)
83 #define IWL_EVT_DISABLE_SIZE (1532/32)
86 * iwl3945_disable_events - Disable selected events in uCode event log
88 * Disable an event by writing "1"s into "disable"
89 * bitmap in SRAM. Bit position corresponds to Event # (id/type).
90 * Default values of 0 enable uCode events to be logged.
91 * Use for only special debugging. This function is just a placeholder as-is,
92 * you'll need to provide the special bits! ...
93 * ... and set IWL_EVT_DISABLE to 1. */
94 void iwl3945_disable_events(struct iwl3945_priv
*priv
)
98 u32 base
; /* SRAM address of event log header */
99 u32 disable_ptr
; /* SRAM address of event-disable bitmap array */
100 u32 array_size
; /* # of u32 entries in array */
101 u32 evt_disable
[IWL_EVT_DISABLE_SIZE
] = {
102 0x00000000, /* 31 - 0 Event id numbers */
103 0x00000000, /* 63 - 32 */
104 0x00000000, /* 95 - 64 */
105 0x00000000, /* 127 - 96 */
106 0x00000000, /* 159 - 128 */
107 0x00000000, /* 191 - 160 */
108 0x00000000, /* 223 - 192 */
109 0x00000000, /* 255 - 224 */
110 0x00000000, /* 287 - 256 */
111 0x00000000, /* 319 - 288 */
112 0x00000000, /* 351 - 320 */
113 0x00000000, /* 383 - 352 */
114 0x00000000, /* 415 - 384 */
115 0x00000000, /* 447 - 416 */
116 0x00000000, /* 479 - 448 */
117 0x00000000, /* 511 - 480 */
118 0x00000000, /* 543 - 512 */
119 0x00000000, /* 575 - 544 */
120 0x00000000, /* 607 - 576 */
121 0x00000000, /* 639 - 608 */
122 0x00000000, /* 671 - 640 */
123 0x00000000, /* 703 - 672 */
124 0x00000000, /* 735 - 704 */
125 0x00000000, /* 767 - 736 */
126 0x00000000, /* 799 - 768 */
127 0x00000000, /* 831 - 800 */
128 0x00000000, /* 863 - 832 */
129 0x00000000, /* 895 - 864 */
130 0x00000000, /* 927 - 896 */
131 0x00000000, /* 959 - 928 */
132 0x00000000, /* 991 - 960 */
133 0x00000000, /* 1023 - 992 */
134 0x00000000, /* 1055 - 1024 */
135 0x00000000, /* 1087 - 1056 */
136 0x00000000, /* 1119 - 1088 */
137 0x00000000, /* 1151 - 1120 */
138 0x00000000, /* 1183 - 1152 */
139 0x00000000, /* 1215 - 1184 */
140 0x00000000, /* 1247 - 1216 */
141 0x00000000, /* 1279 - 1248 */
142 0x00000000, /* 1311 - 1280 */
143 0x00000000, /* 1343 - 1312 */
144 0x00000000, /* 1375 - 1344 */
145 0x00000000, /* 1407 - 1376 */
146 0x00000000, /* 1439 - 1408 */
147 0x00000000, /* 1471 - 1440 */
148 0x00000000, /* 1503 - 1472 */
151 base
= le32_to_cpu(priv
->card_alive
.log_event_table_ptr
);
152 if (!iwl3945_hw_valid_rtc_data_addr(base
)) {
153 IWL_ERROR("Invalid event log pointer 0x%08X\n", base
);
157 ret
= iwl3945_grab_nic_access(priv
);
159 IWL_WARNING("Can not read from adapter at this time.\n");
163 disable_ptr
= iwl3945_read_targ_mem(priv
, base
+ (4 * sizeof(u32
)));
164 array_size
= iwl3945_read_targ_mem(priv
, base
+ (5 * sizeof(u32
)));
165 iwl3945_release_nic_access(priv
);
167 if (IWL_EVT_DISABLE
&& (array_size
== IWL_EVT_DISABLE_SIZE
)) {
168 IWL_DEBUG_INFO("Disabling selected uCode log events at 0x%x\n",
170 ret
= iwl3945_grab_nic_access(priv
);
171 for (i
= 0; i
< IWL_EVT_DISABLE_SIZE
; i
++)
172 iwl3945_write_targ_mem(priv
,
173 disable_ptr
+ (i
* sizeof(u32
)),
176 iwl3945_release_nic_access(priv
);
178 IWL_DEBUG_INFO("Selected uCode log events may be disabled\n");
179 IWL_DEBUG_INFO(" by writing \"1\"s into disable bitmap\n");
180 IWL_DEBUG_INFO(" in SRAM at 0x%x, size %d u32s\n",
181 disable_ptr
, array_size
);
186 static int iwl3945_hwrate_to_plcp_idx(u8 plcp
)
190 for (idx
= 0; idx
< IWL_RATE_COUNT
; idx
++)
191 if (iwl3945_rates
[idx
].plcp
== plcp
)
197 * iwl3945_get_antenna_flags - Get antenna flags for RXON command
198 * @priv: eeprom and antenna fields are used to determine antenna flags
200 * priv->eeprom is used to determine if antenna AUX/MAIN are reversed
201 * priv->antenna specifies the antenna diversity mode:
203 * IWL_ANTENNA_DIVERISTY - NIC selects best antenna by itself
204 * IWL_ANTENNA_MAIN - Force MAIN antenna
205 * IWL_ANTENNA_AUX - Force AUX antenna
207 __le32
iwl3945_get_antenna_flags(const struct iwl3945_priv
*priv
)
209 switch (priv
->antenna
) {
210 case IWL_ANTENNA_DIVERSITY
:
213 case IWL_ANTENNA_MAIN
:
214 if (priv
->eeprom
.antenna_switch_type
)
215 return RXON_FLG_DIS_DIV_MSK
| RXON_FLG_ANT_B_MSK
;
216 return RXON_FLG_DIS_DIV_MSK
| RXON_FLG_ANT_A_MSK
;
218 case IWL_ANTENNA_AUX
:
219 if (priv
->eeprom
.antenna_switch_type
)
220 return RXON_FLG_DIS_DIV_MSK
| RXON_FLG_ANT_A_MSK
;
221 return RXON_FLG_DIS_DIV_MSK
| RXON_FLG_ANT_B_MSK
;
224 /* bad antenna selector value */
225 IWL_ERROR("Bad antenna selector value (0x%x)\n", priv
->antenna
);
226 return 0; /* "diversity" is default if error */
229 #ifdef CONFIG_IWL3945_DEBUG
230 #define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x
232 static const char *iwl3945_get_tx_fail_reason(u32 status
)
234 switch (status
& TX_STATUS_MSK
) {
235 case TX_STATUS_SUCCESS
:
237 TX_STATUS_ENTRY(SHORT_LIMIT
);
238 TX_STATUS_ENTRY(LONG_LIMIT
);
239 TX_STATUS_ENTRY(FIFO_UNDERRUN
);
240 TX_STATUS_ENTRY(MGMNT_ABORT
);
241 TX_STATUS_ENTRY(NEXT_FRAG
);
242 TX_STATUS_ENTRY(LIFE_EXPIRE
);
243 TX_STATUS_ENTRY(DEST_PS
);
244 TX_STATUS_ENTRY(ABORTED
);
245 TX_STATUS_ENTRY(BT_RETRY
);
246 TX_STATUS_ENTRY(STA_INVALID
);
247 TX_STATUS_ENTRY(FRAG_DROPPED
);
248 TX_STATUS_ENTRY(TID_DISABLE
);
249 TX_STATUS_ENTRY(FRAME_FLUSHED
);
250 TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL
);
251 TX_STATUS_ENTRY(TX_LOCKED
);
252 TX_STATUS_ENTRY(NO_BEACON_ON_RADAR
);
258 static inline const char *iwl3945_get_tx_fail_reason(u32 status
)
266 * iwl3945_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd
268 * When FW advances 'R' index, all entries between old and new 'R' index
269 * need to be reclaimed. As result, some free space forms. If there is
270 * enough free space (> low mark), wake the stack that feeds us.
272 static void iwl3945_tx_queue_reclaim(struct iwl3945_priv
*priv
,
273 int txq_id
, int index
)
275 struct iwl3945_tx_queue
*txq
= &priv
->txq
[txq_id
];
276 struct iwl3945_queue
*q
= &txq
->q
;
277 struct iwl3945_tx_info
*tx_info
;
279 BUG_ON(txq_id
== IWL_CMD_QUEUE_NUM
);
281 for (index
= iwl_queue_inc_wrap(index
, q
->n_bd
); q
->read_ptr
!= index
;
282 q
->read_ptr
= iwl_queue_inc_wrap(q
->read_ptr
, q
->n_bd
)) {
284 tx_info
= &txq
->txb
[txq
->q
.read_ptr
];
285 ieee80211_tx_status_irqsafe(priv
->hw
, tx_info
->skb
[0]);
286 tx_info
->skb
[0] = NULL
;
287 iwl3945_hw_txq_free_tfd(priv
, txq
);
290 if (iwl3945_queue_space(q
) > q
->low_mark
&& (txq_id
>= 0) &&
291 (txq_id
!= IWL_CMD_QUEUE_NUM
) &&
292 priv
->mac80211_registered
)
293 ieee80211_wake_queue(priv
->hw
, txq_id
);
297 * iwl3945_rx_reply_tx - Handle Tx response
299 static void iwl3945_rx_reply_tx(struct iwl3945_priv
*priv
,
300 struct iwl3945_rx_mem_buffer
*rxb
)
302 struct iwl3945_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
303 u16 sequence
= le16_to_cpu(pkt
->hdr
.sequence
);
304 int txq_id
= SEQ_TO_QUEUE(sequence
);
305 int index
= SEQ_TO_INDEX(sequence
);
306 struct iwl3945_tx_queue
*txq
= &priv
->txq
[txq_id
];
307 struct ieee80211_tx_info
*info
;
308 struct iwl3945_tx_resp
*tx_resp
= (void *)&pkt
->u
.raw
[0];
309 u32 status
= le32_to_cpu(tx_resp
->status
);
312 if ((index
>= txq
->q
.n_bd
) || (iwl3945_x2_queue_used(&txq
->q
, index
) == 0)) {
313 IWL_ERROR("Read index for DMA queue txq_id (%d) index %d "
314 "is out of range [0-%d] %d %d\n", txq_id
,
315 index
, txq
->q
.n_bd
, txq
->q
.write_ptr
,
320 info
= IEEE80211_SKB_CB(txq
->txb
[txq
->q
.read_ptr
].skb
[0]);
321 memset(&info
->status
, 0, sizeof(info
->status
));
323 info
->status
.retry_count
= tx_resp
->failure_frame
;
324 /* tx_status->rts_retry_count = tx_resp->failure_rts; */
325 info
->flags
|= ((status
& TX_STATUS_MSK
) == TX_STATUS_SUCCESS
) ?
326 IEEE80211_TX_STAT_ACK
: 0;
328 IWL_DEBUG_TX("Tx queue %d Status %s (0x%08x) plcp rate %d retries %d\n",
329 txq_id
, iwl3945_get_tx_fail_reason(status
), status
,
330 tx_resp
->rate
, tx_resp
->failure_frame
);
332 rate_idx
= iwl3945_hwrate_to_plcp_idx(tx_resp
->rate
);
333 if (info
->band
== IEEE80211_BAND_5GHZ
)
334 rate_idx
-= IWL_FIRST_OFDM_RATE
;
335 info
->tx_rate_idx
= rate_idx
;
336 IWL_DEBUG_TX_REPLY("Tx queue reclaim %d\n", index
);
337 iwl3945_tx_queue_reclaim(priv
, txq_id
, index
);
339 if (iwl_check_bits(status
, TX_ABORT_REQUIRED_MSK
))
340 IWL_ERROR("TODO: Implement Tx ABORT REQUIRED!!!\n");
345 /*****************************************************************************
347 * Intel PRO/Wireless 3945ABG/BG Network Connection
349 * RX handler implementations
351 *****************************************************************************/
353 void iwl3945_hw_rx_statistics(struct iwl3945_priv
*priv
, struct iwl3945_rx_mem_buffer
*rxb
)
355 struct iwl3945_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
356 IWL_DEBUG_RX("Statistics notification received (%d vs %d).\n",
357 (int)sizeof(struct iwl3945_notif_statistics
),
358 le32_to_cpu(pkt
->len
));
360 memcpy(&priv
->statistics
, pkt
->u
.raw
, sizeof(priv
->statistics
));
362 iwl3945_led_background(priv
);
364 priv
->last_statistics_time
= jiffies
;
367 /******************************************************************************
369 * Misc. internal state and helper functions
371 ******************************************************************************/
372 #ifdef CONFIG_IWL3945_DEBUG
375 * iwl3945_report_frame - dump frame to syslog during debug sessions
377 * You may hack this function to show different aspects of received frames,
378 * including selective frame dumps.
379 * group100 parameter selects whether to show 1 out of 100 good frames.
381 static void iwl3945_dbg_report_frame(struct iwl3945_priv
*priv
,
382 struct iwl3945_rx_packet
*pkt
,
383 struct ieee80211_hdr
*header
, int group100
)
386 u32 print_summary
= 0;
387 u32 print_dump
= 0; /* set to 1 to dump all frames' contents */
403 struct iwl3945_rx_frame_stats
*rx_stats
= IWL_RX_STATS(pkt
);
404 struct iwl3945_rx_frame_hdr
*rx_hdr
= IWL_RX_HDR(pkt
);
405 struct iwl3945_rx_frame_end
*rx_end
= IWL_RX_END(pkt
);
406 u8
*data
= IWL_RX_DATA(pkt
);
409 fc
= header
->frame_control
;
410 seq_ctl
= le16_to_cpu(header
->seq_ctrl
);
413 channel
= le16_to_cpu(rx_hdr
->channel
);
414 phy_flags
= le16_to_cpu(rx_hdr
->phy_flags
);
415 length
= le16_to_cpu(rx_hdr
->len
);
417 /* end-of-frame status and timestamp */
418 status
= le32_to_cpu(rx_end
->status
);
419 bcn_tmr
= le32_to_cpu(rx_end
->beacon_timestamp
);
420 tsf_low
= le64_to_cpu(rx_end
->timestamp
) & 0x0ffffffff;
421 tsf
= le64_to_cpu(rx_end
->timestamp
);
423 /* signal statistics */
424 rssi
= rx_stats
->rssi
;
426 sig_avg
= le16_to_cpu(rx_stats
->sig_avg
);
427 noise_diff
= le16_to_cpu(rx_stats
->noise_diff
);
429 to_us
= !compare_ether_addr(header
->addr1
, priv
->mac_addr
);
431 /* if data frame is to us and all is good,
432 * (optionally) print summary for only 1 out of every 100 */
433 if (to_us
&& (fc
& ~cpu_to_le16(IEEE80211_FCTL_PROTECTED
)) ==
434 cpu_to_le16(IEEE80211_FCTL_FROMDS
| IEEE80211_FTYPE_DATA
)) {
437 print_summary
= 1; /* print each frame */
438 else if (priv
->framecnt_to_us
< 100) {
439 priv
->framecnt_to_us
++;
442 priv
->framecnt_to_us
= 0;
447 /* print summary for all other frames */
457 else if (ieee80211_has_retry(fc
))
459 else if (ieee80211_is_assoc_resp(fc
))
461 else if (ieee80211_is_reassoc_resp(fc
))
463 else if (ieee80211_is_probe_resp(fc
)) {
465 print_dump
= 1; /* dump frame contents */
466 } else if (ieee80211_is_beacon(fc
)) {
468 print_dump
= 1; /* dump frame contents */
469 } else if (ieee80211_is_atim(fc
))
471 else if (ieee80211_is_auth(fc
))
473 else if (ieee80211_is_deauth(fc
))
475 else if (ieee80211_is_disassoc(fc
))
480 rate
= iwl3945_hwrate_to_plcp_idx(rx_hdr
->rate
);
484 rate
= iwl3945_rates
[rate
].ieee
/ 2;
486 /* print frame summary.
487 * MAC addresses show just the last byte (for brevity),
488 * but you can hack it to show more, if you'd like to. */
490 IWL_DEBUG_RX("%s: mhd=0x%04x, dst=0x%02x, "
491 "len=%u, rssi=%d, chnl=%d, rate=%d, \n",
492 title
, le16_to_cpu(fc
), header
->addr1
[5],
493 length
, rssi
, channel
, rate
);
495 /* src/dst addresses assume managed mode */
496 IWL_DEBUG_RX("%s: 0x%04x, dst=0x%02x, "
497 "src=0x%02x, rssi=%u, tim=%lu usec, "
498 "phy=0x%02x, chnl=%d\n",
499 title
, le16_to_cpu(fc
), header
->addr1
[5],
500 header
->addr3
[5], rssi
,
501 tsf_low
- priv
->scan_start_tsf
,
506 iwl3945_print_hex_dump(IWL_DL_RX
, data
, length
);
509 static inline void iwl3945_dbg_report_frame(struct iwl3945_priv
*priv
,
510 struct iwl3945_rx_packet
*pkt
,
511 struct ieee80211_hdr
*header
, int group100
)
516 /* This is necessary only for a number of statistics, see the caller. */
517 static int iwl3945_is_network_packet(struct iwl3945_priv
*priv
,
518 struct ieee80211_hdr
*header
)
520 /* Filter incoming packets to determine if they are targeted toward
521 * this network, discarding packets coming from ourselves */
522 switch (priv
->iw_mode
) {
523 case NL80211_IFTYPE_ADHOC
: /* Header: Dest. | Source | BSSID */
524 /* packets to our IBSS update information */
525 return !compare_ether_addr(header
->addr3
, priv
->bssid
);
526 case NL80211_IFTYPE_STATION
: /* Header: Dest. | AP{BSSID} | Source */
527 /* packets to our IBSS update information */
528 return !compare_ether_addr(header
->addr2
, priv
->bssid
);
534 static void iwl3945_pass_packet_to_mac80211(struct iwl3945_priv
*priv
,
535 struct iwl3945_rx_mem_buffer
*rxb
,
536 struct ieee80211_rx_status
*stats
)
538 struct iwl3945_rx_packet
*pkt
= (struct iwl3945_rx_packet
*)rxb
->skb
->data
;
539 #ifdef CONFIG_IWL3945_LEDS
540 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)IWL_RX_DATA(pkt
);
542 struct iwl3945_rx_frame_hdr
*rx_hdr
= IWL_RX_HDR(pkt
);
543 struct iwl3945_rx_frame_end
*rx_end
= IWL_RX_END(pkt
);
544 short len
= le16_to_cpu(rx_hdr
->len
);
546 /* We received data from the HW, so stop the watchdog */
547 if (unlikely((len
+ IWL_RX_FRAME_SIZE
) > skb_tailroom(rxb
->skb
))) {
548 IWL_DEBUG_DROP("Corruption detected!\n");
552 /* We only process data packets if the interface is open */
553 if (unlikely(!priv
->is_open
)) {
555 ("Dropping packet while interface is not open.\n");
559 skb_reserve(rxb
->skb
, (void *)rx_hdr
->payload
- (void *)pkt
);
560 /* Set the size of the skb to the size of the frame */
561 skb_put(rxb
->skb
, le16_to_cpu(rx_hdr
->len
));
563 if (iwl3945_param_hwcrypto
)
564 iwl3945_set_decrypted_flag(priv
, rxb
->skb
,
565 le32_to_cpu(rx_end
->status
), stats
);
567 #ifdef CONFIG_IWL3945_LEDS
568 if (ieee80211_is_data(hdr
->frame_control
))
569 priv
->rxtxpackets
+= len
;
571 ieee80211_rx_irqsafe(priv
->hw
, rxb
->skb
, stats
);
575 #define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
577 static void iwl3945_rx_reply_rx(struct iwl3945_priv
*priv
,
578 struct iwl3945_rx_mem_buffer
*rxb
)
580 struct ieee80211_hdr
*header
;
581 struct ieee80211_rx_status rx_status
;
582 struct iwl3945_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
583 struct iwl3945_rx_frame_stats
*rx_stats
= IWL_RX_STATS(pkt
);
584 struct iwl3945_rx_frame_hdr
*rx_hdr
= IWL_RX_HDR(pkt
);
585 struct iwl3945_rx_frame_end
*rx_end
= IWL_RX_END(pkt
);
587 u16 rx_stats_sig_avg
= le16_to_cpu(rx_stats
->sig_avg
);
588 u16 rx_stats_noise_diff
= le16_to_cpu(rx_stats
->noise_diff
);
592 rx_status
.mactime
= le64_to_cpu(rx_end
->timestamp
);
594 ieee80211_channel_to_frequency(le16_to_cpu(rx_hdr
->channel
));
595 rx_status
.band
= (rx_hdr
->phy_flags
& RX_RES_PHY_FLAGS_BAND_24_MSK
) ?
596 IEEE80211_BAND_2GHZ
: IEEE80211_BAND_5GHZ
;
598 rx_status
.rate_idx
= iwl3945_hwrate_to_plcp_idx(rx_hdr
->rate
);
599 if (rx_status
.band
== IEEE80211_BAND_5GHZ
)
600 rx_status
.rate_idx
-= IWL_FIRST_OFDM_RATE
;
602 rx_status
.antenna
= le16_to_cpu(rx_hdr
->phy_flags
&
603 RX_RES_PHY_FLAGS_ANTENNA_MSK
) >> 4;
605 /* set the preamble flag if appropriate */
606 if (rx_hdr
->phy_flags
& RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK
)
607 rx_status
.flag
|= RX_FLAG_SHORTPRE
;
609 if ((unlikely(rx_stats
->phy_count
> 20))) {
611 ("dsp size out of range [0,20]: "
612 "%d/n", rx_stats
->phy_count
);
616 if (!(rx_end
->status
& RX_RES_STATUS_NO_CRC32_ERROR
)
617 || !(rx_end
->status
& RX_RES_STATUS_NO_RXE_OVERFLOW
)) {
618 IWL_DEBUG_RX("Bad CRC or FIFO: 0x%08X.\n", rx_end
->status
);
624 /* Convert 3945's rssi indicator to dBm */
625 rx_status
.signal
= rx_stats
->rssi
- IWL_RSSI_OFFSET
;
627 /* Set default noise value to -127 */
628 if (priv
->last_rx_noise
== 0)
629 priv
->last_rx_noise
= IWL_NOISE_MEAS_NOT_AVAILABLE
;
631 /* 3945 provides noise info for OFDM frames only.
632 * sig_avg and noise_diff are measured by the 3945's digital signal
633 * processor (DSP), and indicate linear levels of signal level and
634 * distortion/noise within the packet preamble after
635 * automatic gain control (AGC). sig_avg should stay fairly
636 * constant if the radio's AGC is working well.
637 * Since these values are linear (not dB or dBm), linear
638 * signal-to-noise ratio (SNR) is (sig_avg / noise_diff).
639 * Convert linear SNR to dB SNR, then subtract that from rssi dBm
640 * to obtain noise level in dBm.
641 * Calculate rx_status.signal (quality indicator in %) based on SNR. */
642 if (rx_stats_noise_diff
) {
643 snr
= rx_stats_sig_avg
/ rx_stats_noise_diff
;
644 rx_status
.noise
= rx_status
.signal
-
645 iwl3945_calc_db_from_ratio(snr
);
646 rx_status
.qual
= iwl3945_calc_sig_qual(rx_status
.signal
,
649 /* If noise info not available, calculate signal quality indicator (%)
650 * using just the dBm signal level. */
652 rx_status
.noise
= priv
->last_rx_noise
;
653 rx_status
.qual
= iwl3945_calc_sig_qual(rx_status
.signal
, 0);
657 IWL_DEBUG_STATS("Rssi %d noise %d qual %d sig_avg %d noise_diff %d\n",
658 rx_status
.signal
, rx_status
.noise
, rx_status
.qual
,
659 rx_stats_sig_avg
, rx_stats_noise_diff
);
661 header
= (struct ieee80211_hdr
*)IWL_RX_DATA(pkt
);
663 network_packet
= iwl3945_is_network_packet(priv
, header
);
665 IWL_DEBUG_STATS_LIMIT("[%c] %d RSSI:%d Signal:%u, Noise:%u, Rate:%u\n",
666 network_packet
? '*' : ' ',
667 le16_to_cpu(rx_hdr
->channel
),
668 rx_status
.signal
, rx_status
.signal
,
669 rx_status
.noise
, rx_status
.rate_idx
);
671 #ifdef CONFIG_IWL3945_DEBUG
672 if (iwl3945_debug_level
& (IWL_DL_RX
))
673 /* Set "1" to report good data frames in groups of 100 */
674 iwl3945_dbg_report_frame(priv
, pkt
, header
, 1);
677 if (network_packet
) {
678 priv
->last_beacon_time
= le32_to_cpu(rx_end
->beacon_timestamp
);
679 priv
->last_tsf
= le64_to_cpu(rx_end
->timestamp
);
680 priv
->last_rx_rssi
= rx_status
.signal
;
681 priv
->last_rx_noise
= rx_status
.noise
;
684 iwl3945_pass_packet_to_mac80211(priv
, rxb
, &rx_status
);
687 int iwl3945_hw_txq_attach_buf_to_tfd(struct iwl3945_priv
*priv
, void *ptr
,
688 dma_addr_t addr
, u16 len
)
692 struct iwl3945_tfd_frame
*tfd
= (struct iwl3945_tfd_frame
*)ptr
;
694 count
= TFD_CTL_COUNT_GET(le32_to_cpu(tfd
->control_flags
));
695 pad
= TFD_CTL_PAD_GET(le32_to_cpu(tfd
->control_flags
));
697 if ((count
>= NUM_TFD_CHUNKS
) || (count
< 0)) {
698 IWL_ERROR("Error can not send more than %d chunks\n",
703 tfd
->pa
[count
].addr
= cpu_to_le32(addr
);
704 tfd
->pa
[count
].len
= cpu_to_le32(len
);
708 tfd
->control_flags
= cpu_to_le32(TFD_CTL_COUNT_SET(count
) |
709 TFD_CTL_PAD_SET(pad
));
715 * iwl3945_hw_txq_free_tfd - Free one TFD, those at index [txq->q.read_ptr]
717 * Does NOT advance any indexes
719 int iwl3945_hw_txq_free_tfd(struct iwl3945_priv
*priv
, struct iwl3945_tx_queue
*txq
)
721 struct iwl3945_tfd_frame
*bd_tmp
= (struct iwl3945_tfd_frame
*)&txq
->bd
[0];
722 struct iwl3945_tfd_frame
*bd
= &bd_tmp
[txq
->q
.read_ptr
];
723 struct pci_dev
*dev
= priv
->pci_dev
;
728 if (txq
->q
.id
== IWL_CMD_QUEUE_NUM
)
729 /* nothing to cleanup after for host commands */
733 counter
= TFD_CTL_COUNT_GET(le32_to_cpu(bd
->control_flags
));
734 if (counter
> NUM_TFD_CHUNKS
) {
735 IWL_ERROR("Too many chunks: %i\n", counter
);
736 /* @todo issue fatal error, it is quite serious situation */
740 /* unmap chunks if any */
742 for (i
= 1; i
< counter
; i
++) {
743 pci_unmap_single(dev
, le32_to_cpu(bd
->pa
[i
].addr
),
744 le32_to_cpu(bd
->pa
[i
].len
), PCI_DMA_TODEVICE
);
745 if (txq
->txb
[txq
->q
.read_ptr
].skb
[0]) {
746 struct sk_buff
*skb
= txq
->txb
[txq
->q
.read_ptr
].skb
[0];
747 if (txq
->txb
[txq
->q
.read_ptr
].skb
[0]) {
748 /* Can be called from interrupt context */
749 dev_kfree_skb_any(skb
);
750 txq
->txb
[txq
->q
.read_ptr
].skb
[0] = NULL
;
757 u8
iwl3945_hw_find_station(struct iwl3945_priv
*priv
, const u8
*addr
)
760 int ret
= IWL_INVALID_STATION
;
763 spin_lock_irqsave(&priv
->sta_lock
, flags
);
764 for (i
= IWL_STA_ID
; i
< priv
->hw_setting
.max_stations
; i
++)
765 if ((priv
->stations
[i
].used
) &&
767 (priv
->stations
[i
].sta
.sta
.addr
, addr
))) {
772 IWL_DEBUG_INFO("can not find STA %pM (total %d)\n",
773 addr
, priv
->num_stations
);
775 spin_unlock_irqrestore(&priv
->sta_lock
, flags
);
780 * iwl3945_hw_build_tx_cmd_rate - Add rate portion to TX_CMD:
783 void iwl3945_hw_build_tx_cmd_rate(struct iwl3945_priv
*priv
,
784 struct iwl3945_cmd
*cmd
,
785 struct ieee80211_tx_info
*info
,
786 struct ieee80211_hdr
*hdr
, int sta_id
, int tx_id
)
789 u16 hw_value
= ieee80211_get_tx_rate(priv
->hw
, info
)->hw_value
;
790 u16 rate_index
= min(hw_value
& 0xffff, IWL_RATE_COUNT
- 1);
796 __le16 fc
= hdr
->frame_control
;
798 rate
= iwl3945_rates
[rate_index
].plcp
;
799 tx_flags
= cmd
->cmd
.tx
.tx_flags
;
801 /* We need to figure out how to get the sta->supp_rates while
802 * in this running context */
803 rate_mask
= IWL_RATES_MASK
;
805 spin_lock_irqsave(&priv
->sta_lock
, flags
);
807 priv
->stations
[sta_id
].current_rate
.rate_n_flags
= rate
;
809 if ((priv
->iw_mode
== NL80211_IFTYPE_ADHOC
) &&
810 (sta_id
!= priv
->hw_setting
.bcast_sta_id
) &&
811 (sta_id
!= IWL_MULTICAST_ID
))
812 priv
->stations
[IWL_STA_ID
].current_rate
.rate_n_flags
= rate
;
814 spin_unlock_irqrestore(&priv
->sta_lock
, flags
);
816 if (tx_id
>= IWL_CMD_QUEUE_NUM
)
821 if (ieee80211_is_probe_resp(fc
)) {
822 data_retry_limit
= 3;
823 if (data_retry_limit
< rts_retry_limit
)
824 rts_retry_limit
= data_retry_limit
;
826 data_retry_limit
= IWL_DEFAULT_TX_RETRY
;
828 if (priv
->data_retry_limit
!= -1)
829 data_retry_limit
= priv
->data_retry_limit
;
831 if (ieee80211_is_mgmt(fc
)) {
832 switch (fc
& cpu_to_le16(IEEE80211_FCTL_STYPE
)) {
833 case cpu_to_le16(IEEE80211_STYPE_AUTH
):
834 case cpu_to_le16(IEEE80211_STYPE_DEAUTH
):
835 case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ
):
836 case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ
):
837 if (tx_flags
& TX_CMD_FLG_RTS_MSK
) {
838 tx_flags
&= ~TX_CMD_FLG_RTS_MSK
;
839 tx_flags
|= TX_CMD_FLG_CTS_MSK
;
847 cmd
->cmd
.tx
.rts_retry_limit
= rts_retry_limit
;
848 cmd
->cmd
.tx
.data_retry_limit
= data_retry_limit
;
849 cmd
->cmd
.tx
.rate
= rate
;
850 cmd
->cmd
.tx
.tx_flags
= tx_flags
;
853 cmd
->cmd
.tx
.supp_rates
[0] =
854 ((rate_mask
& IWL_OFDM_RATES_MASK
) >> IWL_FIRST_OFDM_RATE
) & 0xFF;
857 cmd
->cmd
.tx
.supp_rates
[1] = (rate_mask
& 0xF);
859 IWL_DEBUG_RATE("Tx sta id: %d, rate: %d (plcp), flags: 0x%4X "
860 "cck/ofdm mask: 0x%x/0x%x\n", sta_id
,
861 cmd
->cmd
.tx
.rate
, le32_to_cpu(cmd
->cmd
.tx
.tx_flags
),
862 cmd
->cmd
.tx
.supp_rates
[1], cmd
->cmd
.tx
.supp_rates
[0]);
865 u8
iwl3945_sync_sta(struct iwl3945_priv
*priv
, int sta_id
, u16 tx_rate
, u8 flags
)
867 unsigned long flags_spin
;
868 struct iwl3945_station_entry
*station
;
870 if (sta_id
== IWL_INVALID_STATION
)
871 return IWL_INVALID_STATION
;
873 spin_lock_irqsave(&priv
->sta_lock
, flags_spin
);
874 station
= &priv
->stations
[sta_id
];
876 station
->sta
.sta
.modify_mask
= STA_MODIFY_TX_RATE_MSK
;
877 station
->sta
.rate_n_flags
= cpu_to_le16(tx_rate
);
878 station
->current_rate
.rate_n_flags
= tx_rate
;
879 station
->sta
.mode
= STA_CONTROL_MODIFY_MSK
;
881 spin_unlock_irqrestore(&priv
->sta_lock
, flags_spin
);
883 iwl3945_send_add_station(priv
, &station
->sta
, flags
);
884 IWL_DEBUG_RATE("SCALE sync station %d to rate %d\n",
889 static int iwl3945_nic_set_pwr_src(struct iwl3945_priv
*priv
, int pwr_max
)
894 spin_lock_irqsave(&priv
->lock
, flags
);
895 rc
= iwl3945_grab_nic_access(priv
);
897 spin_unlock_irqrestore(&priv
->lock
, flags
);
904 rc
= pci_read_config_dword(priv
->pci_dev
,
905 PCI_POWER_SOURCE
, &val
);
906 if (val
& PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT
) {
907 iwl3945_set_bits_mask_prph(priv
, APMG_PS_CTRL_REG
,
908 APMG_PS_CTRL_VAL_PWR_SRC_VAUX
,
909 ~APMG_PS_CTRL_MSK_PWR_SRC
);
910 iwl3945_release_nic_access(priv
);
912 iwl3945_poll_bit(priv
, CSR_GPIO_IN
,
913 CSR_GPIO_IN_VAL_VAUX_PWR_SRC
,
914 CSR_GPIO_IN_BIT_AUX_POWER
, 5000);
916 iwl3945_release_nic_access(priv
);
918 iwl3945_set_bits_mask_prph(priv
, APMG_PS_CTRL_REG
,
919 APMG_PS_CTRL_VAL_PWR_SRC_VMAIN
,
920 ~APMG_PS_CTRL_MSK_PWR_SRC
);
922 iwl3945_release_nic_access(priv
);
923 iwl3945_poll_bit(priv
, CSR_GPIO_IN
, CSR_GPIO_IN_VAL_VMAIN_PWR_SRC
,
924 CSR_GPIO_IN_BIT_AUX_POWER
, 5000); /* uS */
926 spin_unlock_irqrestore(&priv
->lock
, flags
);
931 static int iwl3945_rx_init(struct iwl3945_priv
*priv
, struct iwl3945_rx_queue
*rxq
)
936 spin_lock_irqsave(&priv
->lock
, flags
);
937 rc
= iwl3945_grab_nic_access(priv
);
939 spin_unlock_irqrestore(&priv
->lock
, flags
);
943 iwl3945_write_direct32(priv
, FH_RCSR_RBD_BASE(0), rxq
->dma_addr
);
944 iwl3945_write_direct32(priv
, FH_RCSR_RPTR_ADDR(0),
945 priv
->hw_setting
.shared_phys
+
946 offsetof(struct iwl3945_shared
, rx_read_ptr
[0]));
947 iwl3945_write_direct32(priv
, FH_RCSR_WPTR(0), 0);
948 iwl3945_write_direct32(priv
, FH_RCSR_CONFIG(0),
949 ALM_FH_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE
|
950 ALM_FH_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE
|
951 ALM_FH_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN
|
952 ALM_FH_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128
|
953 (RX_QUEUE_SIZE_LOG
<< ALM_FH_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE
) |
954 ALM_FH_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST
|
955 (1 << ALM_FH_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH
) |
956 ALM_FH_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH
);
958 /* fake read to flush all prev I/O */
959 iwl3945_read_direct32(priv
, FH_RSSR_CTRL
);
961 iwl3945_release_nic_access(priv
);
962 spin_unlock_irqrestore(&priv
->lock
, flags
);
967 static int iwl3945_tx_reset(struct iwl3945_priv
*priv
)
972 spin_lock_irqsave(&priv
->lock
, flags
);
973 rc
= iwl3945_grab_nic_access(priv
);
975 spin_unlock_irqrestore(&priv
->lock
, flags
);
980 iwl3945_write_prph(priv
, ALM_SCD_MODE_REG
, 0x2);
983 iwl3945_write_prph(priv
, ALM_SCD_ARASTAT_REG
, 0x01);
985 /* all 6 fifo are active */
986 iwl3945_write_prph(priv
, ALM_SCD_TXFACT_REG
, 0x3f);
988 iwl3945_write_prph(priv
, ALM_SCD_SBYP_MODE_1_REG
, 0x010000);
989 iwl3945_write_prph(priv
, ALM_SCD_SBYP_MODE_2_REG
, 0x030002);
990 iwl3945_write_prph(priv
, ALM_SCD_TXF4MF_REG
, 0x000004);
991 iwl3945_write_prph(priv
, ALM_SCD_TXF5MF_REG
, 0x000005);
993 iwl3945_write_direct32(priv
, FH_TSSR_CBB_BASE
,
994 priv
->hw_setting
.shared_phys
);
996 iwl3945_write_direct32(priv
, FH_TSSR_MSG_CONFIG
,
997 ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON
|
998 ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON
|
999 ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B
|
1000 ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON
|
1001 ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON
|
1002 ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH
|
1003 ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH
);
1005 iwl3945_release_nic_access(priv
);
1006 spin_unlock_irqrestore(&priv
->lock
, flags
);
1012 * iwl3945_txq_ctx_reset - Reset TX queue context
1014 * Destroys all DMA structures and initialize them again
1016 static int iwl3945_txq_ctx_reset(struct iwl3945_priv
*priv
)
1019 int txq_id
, slots_num
;
1021 iwl3945_hw_txq_ctx_free(priv
);
1024 rc
= iwl3945_tx_reset(priv
);
1029 for (txq_id
= 0; txq_id
< TFD_QUEUE_MAX
; txq_id
++) {
1030 slots_num
= (txq_id
== IWL_CMD_QUEUE_NUM
) ?
1031 TFD_CMD_SLOTS
: TFD_TX_CMD_SLOTS
;
1032 rc
= iwl3945_tx_queue_init(priv
, &priv
->txq
[txq_id
], slots_num
,
1035 IWL_ERROR("Tx %d queue init failed\n", txq_id
);
1043 iwl3945_hw_txq_ctx_free(priv
);
1047 int iwl3945_hw_nic_init(struct iwl3945_priv
*priv
)
1051 unsigned long flags
;
1052 struct iwl3945_rx_queue
*rxq
= &priv
->rxq
;
1054 iwl3945_power_init_handle(priv
);
1056 spin_lock_irqsave(&priv
->lock
, flags
);
1057 iwl3945_set_bit(priv
, CSR_ANA_PLL_CFG
, CSR39_ANA_PLL_CFG_VAL
);
1058 iwl3945_set_bit(priv
, CSR_GIO_CHICKEN_BITS
,
1059 CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX
);
1061 iwl3945_set_bit(priv
, CSR_GP_CNTRL
, CSR_GP_CNTRL_REG_FLAG_INIT_DONE
);
1062 rc
= iwl3945_poll_bit(priv
, CSR_GP_CNTRL
,
1063 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY
,
1064 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY
, 25000);
1066 spin_unlock_irqrestore(&priv
->lock
, flags
);
1067 IWL_DEBUG_INFO("Failed to init the card\n");
1071 rc
= iwl3945_grab_nic_access(priv
);
1073 spin_unlock_irqrestore(&priv
->lock
, flags
);
1076 iwl3945_write_prph(priv
, APMG_CLK_EN_REG
,
1077 APMG_CLK_VAL_DMA_CLK_RQT
|
1078 APMG_CLK_VAL_BSM_CLK_RQT
);
1080 iwl3945_set_bits_prph(priv
, APMG_PCIDEV_STT_REG
,
1081 APMG_PCIDEV_STT_VAL_L1_ACT_DIS
);
1082 iwl3945_release_nic_access(priv
);
1083 spin_unlock_irqrestore(&priv
->lock
, flags
);
1085 /* Determine HW type */
1086 rc
= pci_read_config_byte(priv
->pci_dev
, PCI_REVISION_ID
, &rev_id
);
1089 IWL_DEBUG_INFO("HW Revision ID = 0x%X\n", rev_id
);
1091 iwl3945_nic_set_pwr_src(priv
, 1);
1092 spin_lock_irqsave(&priv
->lock
, flags
);
1094 if (rev_id
& PCI_CFG_REV_ID_BIT_RTP
)
1095 IWL_DEBUG_INFO("RTP type \n");
1096 else if (rev_id
& PCI_CFG_REV_ID_BIT_BASIC_SKU
) {
1097 IWL_DEBUG_INFO("3945 RADIO-MB type\n");
1098 iwl3945_set_bit(priv
, CSR_HW_IF_CONFIG_REG
,
1099 CSR39_HW_IF_CONFIG_REG_BIT_3945_MB
);
1101 IWL_DEBUG_INFO("3945 RADIO-MM type\n");
1102 iwl3945_set_bit(priv
, CSR_HW_IF_CONFIG_REG
,
1103 CSR39_HW_IF_CONFIG_REG_BIT_3945_MM
);
1106 if (EEPROM_SKU_CAP_OP_MODE_MRC
== priv
->eeprom
.sku_cap
) {
1107 IWL_DEBUG_INFO("SKU OP mode is mrc\n");
1108 iwl3945_set_bit(priv
, CSR_HW_IF_CONFIG_REG
,
1109 CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC
);
1111 IWL_DEBUG_INFO("SKU OP mode is basic\n");
1113 if ((priv
->eeprom
.board_revision
& 0xF0) == 0xD0) {
1114 IWL_DEBUG_INFO("3945ABG revision is 0x%X\n",
1115 priv
->eeprom
.board_revision
);
1116 iwl3945_set_bit(priv
, CSR_HW_IF_CONFIG_REG
,
1117 CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE
);
1119 IWL_DEBUG_INFO("3945ABG revision is 0x%X\n",
1120 priv
->eeprom
.board_revision
);
1121 iwl3945_clear_bit(priv
, CSR_HW_IF_CONFIG_REG
,
1122 CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE
);
1125 if (priv
->eeprom
.almgor_m_version
<= 1) {
1126 iwl3945_set_bit(priv
, CSR_HW_IF_CONFIG_REG
,
1127 CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A
);
1128 IWL_DEBUG_INFO("Card M type A version is 0x%X\n",
1129 priv
->eeprom
.almgor_m_version
);
1131 IWL_DEBUG_INFO("Card M type B version is 0x%X\n",
1132 priv
->eeprom
.almgor_m_version
);
1133 iwl3945_set_bit(priv
, CSR_HW_IF_CONFIG_REG
,
1134 CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B
);
1136 spin_unlock_irqrestore(&priv
->lock
, flags
);
1138 if (priv
->eeprom
.sku_cap
& EEPROM_SKU_CAP_SW_RF_KILL_ENABLE
)
1139 IWL_DEBUG_RF_KILL("SW RF KILL supported in EEPROM.\n");
1141 if (priv
->eeprom
.sku_cap
& EEPROM_SKU_CAP_HW_RF_KILL_ENABLE
)
1142 IWL_DEBUG_RF_KILL("HW RF KILL supported in EEPROM.\n");
1144 /* Allocate the RX queue, or reset if it is already allocated */
1146 rc
= iwl3945_rx_queue_alloc(priv
);
1148 IWL_ERROR("Unable to initialize Rx queue\n");
1152 iwl3945_rx_queue_reset(priv
, rxq
);
1154 iwl3945_rx_replenish(priv
);
1156 iwl3945_rx_init(priv
, rxq
);
1158 spin_lock_irqsave(&priv
->lock
, flags
);
1160 /* Look at using this instead:
1161 rxq->need_update = 1;
1162 iwl3945_rx_queue_update_write_ptr(priv, rxq);
1165 rc
= iwl3945_grab_nic_access(priv
);
1167 spin_unlock_irqrestore(&priv
->lock
, flags
);
1170 iwl3945_write_direct32(priv
, FH_RCSR_WPTR(0), rxq
->write
& ~7);
1171 iwl3945_release_nic_access(priv
);
1173 spin_unlock_irqrestore(&priv
->lock
, flags
);
1175 rc
= iwl3945_txq_ctx_reset(priv
);
1179 set_bit(STATUS_INIT
, &priv
->status
);
1185 * iwl3945_hw_txq_ctx_free - Free TXQ Context
1187 * Destroy all TX DMA queues and structures
1189 void iwl3945_hw_txq_ctx_free(struct iwl3945_priv
*priv
)
1194 for (txq_id
= 0; txq_id
< TFD_QUEUE_MAX
; txq_id
++)
1195 iwl3945_tx_queue_free(priv
, &priv
->txq
[txq_id
]);
1198 void iwl3945_hw_txq_ctx_stop(struct iwl3945_priv
*priv
)
1201 unsigned long flags
;
1203 spin_lock_irqsave(&priv
->lock
, flags
);
1204 if (iwl3945_grab_nic_access(priv
)) {
1205 spin_unlock_irqrestore(&priv
->lock
, flags
);
1206 iwl3945_hw_txq_ctx_free(priv
);
1211 iwl3945_write_prph(priv
, ALM_SCD_MODE_REG
, 0);
1213 /* reset TFD queues */
1214 for (queue
= TFD_QUEUE_MIN
; queue
< TFD_QUEUE_MAX
; queue
++) {
1215 iwl3945_write_direct32(priv
, FH_TCSR_CONFIG(queue
), 0x0);
1216 iwl3945_poll_direct_bit(priv
, FH_TSSR_TX_STATUS
,
1217 ALM_FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(queue
),
1221 iwl3945_release_nic_access(priv
);
1222 spin_unlock_irqrestore(&priv
->lock
, flags
);
1224 iwl3945_hw_txq_ctx_free(priv
);
1227 int iwl3945_hw_nic_stop_master(struct iwl3945_priv
*priv
)
1231 unsigned long flags
;
1233 spin_lock_irqsave(&priv
->lock
, flags
);
1235 /* set stop master bit */
1236 iwl3945_set_bit(priv
, CSR_RESET
, CSR_RESET_REG_FLAG_STOP_MASTER
);
1238 reg_val
= iwl3945_read32(priv
, CSR_GP_CNTRL
);
1240 if (CSR_GP_CNTRL_REG_FLAG_MAC_POWER_SAVE
==
1241 (reg_val
& CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE
))
1242 IWL_DEBUG_INFO("Card in power save, master is already "
1245 rc
= iwl3945_poll_bit(priv
, CSR_RESET
,
1246 CSR_RESET_REG_FLAG_MASTER_DISABLED
,
1247 CSR_RESET_REG_FLAG_MASTER_DISABLED
, 100);
1249 spin_unlock_irqrestore(&priv
->lock
, flags
);
1254 spin_unlock_irqrestore(&priv
->lock
, flags
);
1255 IWL_DEBUG_INFO("stop master\n");
1260 int iwl3945_hw_nic_reset(struct iwl3945_priv
*priv
)
1263 unsigned long flags
;
1265 iwl3945_hw_nic_stop_master(priv
);
1267 spin_lock_irqsave(&priv
->lock
, flags
);
1269 iwl3945_set_bit(priv
, CSR_RESET
, CSR_RESET_REG_FLAG_SW_RESET
);
1271 rc
= iwl3945_poll_bit(priv
, CSR_GP_CNTRL
,
1272 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY
,
1273 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY
, 25000);
1275 rc
= iwl3945_grab_nic_access(priv
);
1277 iwl3945_write_prph(priv
, APMG_CLK_CTRL_REG
,
1278 APMG_CLK_VAL_BSM_CLK_RQT
);
1282 iwl3945_set_bit(priv
, CSR_GP_CNTRL
,
1283 CSR_GP_CNTRL_REG_FLAG_INIT_DONE
);
1285 iwl3945_write_prph(priv
, APMG_RTC_INT_MSK_REG
, 0x0);
1286 iwl3945_write_prph(priv
, APMG_RTC_INT_STT_REG
,
1290 iwl3945_write_prph(priv
, APMG_CLK_EN_REG
,
1291 APMG_CLK_VAL_DMA_CLK_RQT
|
1292 APMG_CLK_VAL_BSM_CLK_RQT
);
1295 iwl3945_set_bits_prph(priv
, APMG_PS_CTRL_REG
,
1296 APMG_PS_CTRL_VAL_RESET_REQ
);
1298 iwl3945_clear_bits_prph(priv
, APMG_PS_CTRL_REG
,
1299 APMG_PS_CTRL_VAL_RESET_REQ
);
1300 iwl3945_release_nic_access(priv
);
1303 /* Clear the 'host command active' bit... */
1304 clear_bit(STATUS_HCMD_ACTIVE
, &priv
->status
);
1306 wake_up_interruptible(&priv
->wait_command_queue
);
1307 spin_unlock_irqrestore(&priv
->lock
, flags
);
1313 * iwl3945_hw_reg_adjust_power_by_temp
1314 * return index delta into power gain settings table
1316 static int iwl3945_hw_reg_adjust_power_by_temp(int new_reading
, int old_reading
)
1318 return (new_reading
- old_reading
) * (-11) / 100;
1322 * iwl3945_hw_reg_temp_out_of_range - Keep temperature in sane range
1324 static inline int iwl3945_hw_reg_temp_out_of_range(int temperature
)
1326 return ((temperature
< -260) || (temperature
> 25)) ? 1 : 0;
1329 int iwl3945_hw_get_temperature(struct iwl3945_priv
*priv
)
1331 return iwl3945_read32(priv
, CSR_UCODE_DRV_GP2
);
1335 * iwl3945_hw_reg_txpower_get_temperature
1336 * get the current temperature by reading from NIC
1338 static int iwl3945_hw_reg_txpower_get_temperature(struct iwl3945_priv
*priv
)
1342 temperature
= iwl3945_hw_get_temperature(priv
);
1344 /* driver's okay range is -260 to +25.
1345 * human readable okay range is 0 to +285 */
1346 IWL_DEBUG_INFO("Temperature: %d\n", temperature
+ IWL_TEMP_CONVERT
);
1348 /* handle insane temp reading */
1349 if (iwl3945_hw_reg_temp_out_of_range(temperature
)) {
1350 IWL_ERROR("Error bad temperature value %d\n", temperature
);
1352 /* if really really hot(?),
1353 * substitute the 3rd band/group's temp measured at factory */
1354 if (priv
->last_temperature
> 100)
1355 temperature
= priv
->eeprom
.groups
[2].temperature
;
1356 else /* else use most recent "sane" value from driver */
1357 temperature
= priv
->last_temperature
;
1360 return temperature
; /* raw, not "human readable" */
1363 /* Adjust Txpower only if temperature variance is greater than threshold.
1365 * Both are lower than older versions' 9 degrees */
1366 #define IWL_TEMPERATURE_LIMIT_TIMER 6
1369 * is_temp_calib_needed - determines if new calibration is needed
1371 * records new temperature in tx_mgr->temperature.
1372 * replaces tx_mgr->last_temperature *only* if calib needed
1373 * (assumes caller will actually do the calibration!). */
1374 static int is_temp_calib_needed(struct iwl3945_priv
*priv
)
1378 priv
->temperature
= iwl3945_hw_reg_txpower_get_temperature(priv
);
1379 temp_diff
= priv
->temperature
- priv
->last_temperature
;
1381 /* get absolute value */
1382 if (temp_diff
< 0) {
1383 IWL_DEBUG_POWER("Getting cooler, delta %d,\n", temp_diff
);
1384 temp_diff
= -temp_diff
;
1385 } else if (temp_diff
== 0)
1386 IWL_DEBUG_POWER("Same temp,\n");
1388 IWL_DEBUG_POWER("Getting warmer, delta %d,\n", temp_diff
);
1390 /* if we don't need calibration, *don't* update last_temperature */
1391 if (temp_diff
< IWL_TEMPERATURE_LIMIT_TIMER
) {
1392 IWL_DEBUG_POWER("Timed thermal calib not needed\n");
1396 IWL_DEBUG_POWER("Timed thermal calib needed\n");
1398 /* assume that caller will actually do calib ...
1399 * update the "last temperature" value */
1400 priv
->last_temperature
= priv
->temperature
;
1404 #define IWL_MAX_GAIN_ENTRIES 78
1405 #define IWL_CCK_FROM_OFDM_POWER_DIFF -5
1406 #define IWL_CCK_FROM_OFDM_INDEX_DIFF (10)
1408 /* radio and DSP power table, each step is 1/2 dB.
1409 * 1st number is for RF analog gain, 2nd number is for DSP pre-DAC gain. */
1410 static struct iwl3945_tx_power power_gain_table
[2][IWL_MAX_GAIN_ENTRIES
] = {
1412 {251, 127}, /* 2.4 GHz, highest power */
1489 {3, 95} }, /* 2.4 GHz, lowest power */
1491 {251, 127}, /* 5.x GHz, highest power */
1568 {3, 120} } /* 5.x GHz, lowest power */
1571 static inline u8
iwl3945_hw_reg_fix_power_index(int index
)
1575 if (index
>= IWL_MAX_GAIN_ENTRIES
)
1576 return IWL_MAX_GAIN_ENTRIES
- 1;
1580 /* Kick off thermal recalibration check every 60 seconds */
1581 #define REG_RECALIB_PERIOD (60)
1584 * iwl3945_hw_reg_set_scan_power - Set Tx power for scan probe requests
1586 * Set (in our channel info database) the direct scan Tx power for 1 Mbit (CCK)
1587 * or 6 Mbit (OFDM) rates.
1589 static void iwl3945_hw_reg_set_scan_power(struct iwl3945_priv
*priv
, u32 scan_tbl_index
,
1590 s32 rate_index
, const s8
*clip_pwrs
,
1591 struct iwl3945_channel_info
*ch_info
,
1594 struct iwl3945_scan_power_info
*scan_power_info
;
1598 scan_power_info
= &ch_info
->scan_pwr_info
[scan_tbl_index
];
1600 /* use this channel group's 6Mbit clipping/saturation pwr,
1601 * but cap at regulatory scan power restriction (set during init
1602 * based on eeprom channel data) for this channel. */
1603 power
= min(ch_info
->scan_power
, clip_pwrs
[IWL_RATE_6M_INDEX_TABLE
]);
1605 /* further limit to user's max power preference.
1606 * FIXME: Other spectrum management power limitations do not
1607 * seem to apply?? */
1608 power
= min(power
, priv
->user_txpower_limit
);
1609 scan_power_info
->requested_power
= power
;
1611 /* find difference between new scan *power* and current "normal"
1612 * Tx *power* for 6Mb. Use this difference (x2) to adjust the
1613 * current "normal" temperature-compensated Tx power *index* for
1614 * this rate (1Mb or 6Mb) to yield new temp-compensated scan power
1616 power_index
= ch_info
->power_info
[rate_index
].power_table_index
1617 - (power
- ch_info
->power_info
1618 [IWL_RATE_6M_INDEX_TABLE
].requested_power
) * 2;
1620 /* store reference index that we use when adjusting *all* scan
1621 * powers. So we can accommodate user (all channel) or spectrum
1622 * management (single channel) power changes "between" temperature
1623 * feedback compensation procedures.
1624 * don't force fit this reference index into gain table; it may be a
1625 * negative number. This will help avoid errors when we're at
1626 * the lower bounds (highest gains, for warmest temperatures)
1629 /* don't exceed table bounds for "real" setting */
1630 power_index
= iwl3945_hw_reg_fix_power_index(power_index
);
1632 scan_power_info
->power_table_index
= power_index
;
1633 scan_power_info
->tpc
.tx_gain
=
1634 power_gain_table
[band_index
][power_index
].tx_gain
;
1635 scan_power_info
->tpc
.dsp_atten
=
1636 power_gain_table
[band_index
][power_index
].dsp_atten
;
1640 * iwl3945_hw_reg_send_txpower - fill in Tx Power command with gain settings
1642 * Configures power settings for all rates for the current channel,
1643 * using values from channel info struct, and send to NIC
1645 int iwl3945_hw_reg_send_txpower(struct iwl3945_priv
*priv
)
1648 const struct iwl3945_channel_info
*ch_info
= NULL
;
1649 struct iwl3945_txpowertable_cmd txpower
= {
1650 .channel
= priv
->active_rxon
.channel
,
1653 txpower
.band
= (priv
->band
== IEEE80211_BAND_5GHZ
) ? 0 : 1;
1654 ch_info
= iwl3945_get_channel_info(priv
,
1656 le16_to_cpu(priv
->active_rxon
.channel
));
1659 ("Failed to get channel info for channel %d [%d]\n",
1660 le16_to_cpu(priv
->active_rxon
.channel
), priv
->band
);
1664 if (!is_channel_valid(ch_info
)) {
1665 IWL_DEBUG_POWER("Not calling TX_PWR_TABLE_CMD on "
1666 "non-Tx channel.\n");
1670 /* fill cmd with power settings for all rates for current channel */
1671 /* Fill OFDM rate */
1672 for (rate_idx
= IWL_FIRST_OFDM_RATE
, i
= 0;
1673 rate_idx
<= IWL_LAST_OFDM_RATE
; rate_idx
++, i
++) {
1675 txpower
.power
[i
].tpc
= ch_info
->power_info
[i
].tpc
;
1676 txpower
.power
[i
].rate
= iwl3945_rates
[rate_idx
].plcp
;
1678 IWL_DEBUG_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
1679 le16_to_cpu(txpower
.channel
),
1681 txpower
.power
[i
].tpc
.tx_gain
,
1682 txpower
.power
[i
].tpc
.dsp_atten
,
1683 txpower
.power
[i
].rate
);
1685 /* Fill CCK rates */
1686 for (rate_idx
= IWL_FIRST_CCK_RATE
;
1687 rate_idx
<= IWL_LAST_CCK_RATE
; rate_idx
++, i
++) {
1688 txpower
.power
[i
].tpc
= ch_info
->power_info
[i
].tpc
;
1689 txpower
.power
[i
].rate
= iwl3945_rates
[rate_idx
].plcp
;
1691 IWL_DEBUG_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
1692 le16_to_cpu(txpower
.channel
),
1694 txpower
.power
[i
].tpc
.tx_gain
,
1695 txpower
.power
[i
].tpc
.dsp_atten
,
1696 txpower
.power
[i
].rate
);
1699 return iwl3945_send_cmd_pdu(priv
, REPLY_TX_PWR_TABLE_CMD
,
1700 sizeof(struct iwl3945_txpowertable_cmd
), &txpower
);
1705 * iwl3945_hw_reg_set_new_power - Configures power tables at new levels
1706 * @ch_info: Channel to update. Uses power_info.requested_power.
1708 * Replace requested_power and base_power_index ch_info fields for
1711 * Called if user or spectrum management changes power preferences.
1712 * Takes into account h/w and modulation limitations (clip power).
1714 * This does *not* send anything to NIC, just sets up ch_info for one channel.
1716 * NOTE: reg_compensate_for_temperature_dif() *must* be run after this to
1717 * properly fill out the scan powers, and actual h/w gain settings,
1718 * and send changes to NIC
1720 static int iwl3945_hw_reg_set_new_power(struct iwl3945_priv
*priv
,
1721 struct iwl3945_channel_info
*ch_info
)
1723 struct iwl3945_channel_power_info
*power_info
;
1724 int power_changed
= 0;
1726 const s8
*clip_pwrs
;
1729 /* Get this chnlgrp's rate-to-max/clip-powers table */
1730 clip_pwrs
= priv
->clip_groups
[ch_info
->group_index
].clip_powers
;
1732 /* Get this channel's rate-to-current-power settings table */
1733 power_info
= ch_info
->power_info
;
1735 /* update OFDM Txpower settings */
1736 for (i
= IWL_RATE_6M_INDEX_TABLE
; i
<= IWL_RATE_54M_INDEX_TABLE
;
1737 i
++, ++power_info
) {
1740 /* limit new power to be no more than h/w capability */
1741 power
= min(ch_info
->curr_txpow
, clip_pwrs
[i
]);
1742 if (power
== power_info
->requested_power
)
1745 /* find difference between old and new requested powers,
1746 * update base (non-temp-compensated) power index */
1747 delta_idx
= (power
- power_info
->requested_power
) * 2;
1748 power_info
->base_power_index
-= delta_idx
;
1750 /* save new requested power value */
1751 power_info
->requested_power
= power
;
1756 /* update CCK Txpower settings, based on OFDM 12M setting ...
1757 * ... all CCK power settings for a given channel are the *same*. */
1758 if (power_changed
) {
1760 ch_info
->power_info
[IWL_RATE_12M_INDEX_TABLE
].
1761 requested_power
+ IWL_CCK_FROM_OFDM_POWER_DIFF
;
1763 /* do all CCK rates' iwl3945_channel_power_info structures */
1764 for (i
= IWL_RATE_1M_INDEX_TABLE
; i
<= IWL_RATE_11M_INDEX_TABLE
; i
++) {
1765 power_info
->requested_power
= power
;
1766 power_info
->base_power_index
=
1767 ch_info
->power_info
[IWL_RATE_12M_INDEX_TABLE
].
1768 base_power_index
+ IWL_CCK_FROM_OFDM_INDEX_DIFF
;
1777 * iwl3945_hw_reg_get_ch_txpower_limit - returns new power limit for channel
1779 * NOTE: Returned power limit may be less (but not more) than requested,
1780 * based strictly on regulatory (eeprom and spectrum mgt) limitations
1781 * (no consideration for h/w clipping limitations).
1783 static int iwl3945_hw_reg_get_ch_txpower_limit(struct iwl3945_channel_info
*ch_info
)
1788 /* if we're using TGd limits, use lower of TGd or EEPROM */
1789 if (ch_info
->tgd_data
.max_power
!= 0)
1790 max_power
= min(ch_info
->tgd_data
.max_power
,
1791 ch_info
->eeprom
.max_power_avg
);
1793 /* else just use EEPROM limits */
1796 max_power
= ch_info
->eeprom
.max_power_avg
;
1798 return min(max_power
, ch_info
->max_power_avg
);
1802 * iwl3945_hw_reg_comp_txpower_temp - Compensate for temperature
1804 * Compensate txpower settings of *all* channels for temperature.
1805 * This only accounts for the difference between current temperature
1806 * and the factory calibration temperatures, and bases the new settings
1807 * on the channel's base_power_index.
1809 * If RxOn is "associated", this sends the new Txpower to NIC!
1811 static int iwl3945_hw_reg_comp_txpower_temp(struct iwl3945_priv
*priv
)
1813 struct iwl3945_channel_info
*ch_info
= NULL
;
1815 const s8
*clip_pwrs
; /* array of h/w max power levels for each rate */
1821 int temperature
= priv
->temperature
;
1823 /* set up new Tx power info for each and every channel, 2.4 and 5.x */
1824 for (i
= 0; i
< priv
->channel_count
; i
++) {
1825 ch_info
= &priv
->channel_info
[i
];
1826 a_band
= is_channel_a_band(ch_info
);
1828 /* Get this chnlgrp's factory calibration temperature */
1829 ref_temp
= (s16
)priv
->eeprom
.groups
[ch_info
->group_index
].
1832 /* get power index adjustment based on curr and factory
1834 delta_index
= iwl3945_hw_reg_adjust_power_by_temp(temperature
,
1837 /* set tx power value for all rates, OFDM and CCK */
1838 for (rate_index
= 0; rate_index
< IWL_RATE_COUNT
;
1841 ch_info
->power_info
[rate_index
].base_power_index
;
1843 /* temperature compensate */
1844 power_idx
+= delta_index
;
1846 /* stay within table range */
1847 power_idx
= iwl3945_hw_reg_fix_power_index(power_idx
);
1848 ch_info
->power_info
[rate_index
].
1849 power_table_index
= (u8
) power_idx
;
1850 ch_info
->power_info
[rate_index
].tpc
=
1851 power_gain_table
[a_band
][power_idx
];
1854 /* Get this chnlgrp's rate-to-max/clip-powers table */
1855 clip_pwrs
= priv
->clip_groups
[ch_info
->group_index
].clip_powers
;
1857 /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
1858 for (scan_tbl_index
= 0;
1859 scan_tbl_index
< IWL_NUM_SCAN_RATES
; scan_tbl_index
++) {
1860 s32 actual_index
= (scan_tbl_index
== 0) ?
1861 IWL_RATE_1M_INDEX_TABLE
: IWL_RATE_6M_INDEX_TABLE
;
1862 iwl3945_hw_reg_set_scan_power(priv
, scan_tbl_index
,
1863 actual_index
, clip_pwrs
,
1868 /* send Txpower command for current channel to ucode */
1869 return iwl3945_hw_reg_send_txpower(priv
);
1872 int iwl3945_hw_reg_set_txpower(struct iwl3945_priv
*priv
, s8 power
)
1874 struct iwl3945_channel_info
*ch_info
;
1879 if (priv
->user_txpower_limit
== power
) {
1880 IWL_DEBUG_POWER("Requested Tx power same as current "
1881 "limit: %ddBm.\n", power
);
1885 IWL_DEBUG_POWER("Setting upper limit clamp to %ddBm.\n", power
);
1886 priv
->user_txpower_limit
= power
;
1888 /* set up new Tx powers for each and every channel, 2.4 and 5.x */
1890 for (i
= 0; i
< priv
->channel_count
; i
++) {
1891 ch_info
= &priv
->channel_info
[i
];
1892 a_band
= is_channel_a_band(ch_info
);
1894 /* find minimum power of all user and regulatory constraints
1895 * (does not consider h/w clipping limitations) */
1896 max_power
= iwl3945_hw_reg_get_ch_txpower_limit(ch_info
);
1897 max_power
= min(power
, max_power
);
1898 if (max_power
!= ch_info
->curr_txpow
) {
1899 ch_info
->curr_txpow
= max_power
;
1901 /* this considers the h/w clipping limitations */
1902 iwl3945_hw_reg_set_new_power(priv
, ch_info
);
1906 /* update txpower settings for all channels,
1907 * send to NIC if associated. */
1908 is_temp_calib_needed(priv
);
1909 iwl3945_hw_reg_comp_txpower_temp(priv
);
1914 /* will add 3945 channel switch cmd handling later */
1915 int iwl3945_hw_channel_switch(struct iwl3945_priv
*priv
, u16 channel
)
1921 * iwl3945_reg_txpower_periodic - called when time to check our temperature.
1923 * -- reset periodic timer
1924 * -- see if temp has changed enough to warrant re-calibration ... if so:
1925 * -- correct coeffs for temp (can reset temp timer)
1926 * -- save this temp as "last",
1927 * -- send new set of gain settings to NIC
1928 * NOTE: This should continue working, even when we're not associated,
1929 * so we can keep our internal table of scan powers current. */
1930 void iwl3945_reg_txpower_periodic(struct iwl3945_priv
*priv
)
1932 /* This will kick in the "brute force"
1933 * iwl3945_hw_reg_comp_txpower_temp() below */
1934 if (!is_temp_calib_needed(priv
))
1937 /* Set up a new set of temp-adjusted TxPowers, send to NIC.
1938 * This is based *only* on current temperature,
1939 * ignoring any previous power measurements */
1940 iwl3945_hw_reg_comp_txpower_temp(priv
);
1943 queue_delayed_work(priv
->workqueue
,
1944 &priv
->thermal_periodic
, REG_RECALIB_PERIOD
* HZ
);
1947 static void iwl3945_bg_reg_txpower_periodic(struct work_struct
*work
)
1949 struct iwl3945_priv
*priv
= container_of(work
, struct iwl3945_priv
,
1950 thermal_periodic
.work
);
1952 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
1955 mutex_lock(&priv
->mutex
);
1956 iwl3945_reg_txpower_periodic(priv
);
1957 mutex_unlock(&priv
->mutex
);
1961 * iwl3945_hw_reg_get_ch_grp_index - find the channel-group index (0-4)
1964 * This function is used when initializing channel-info structs.
1966 * NOTE: These channel groups do *NOT* match the bands above!
1967 * These channel groups are based on factory-tested channels;
1968 * on A-band, EEPROM's "group frequency" entries represent the top
1969 * channel in each group 1-4. Group 5 All B/G channels are in group 0.
1971 static u16
iwl3945_hw_reg_get_ch_grp_index(struct iwl3945_priv
*priv
,
1972 const struct iwl3945_channel_info
*ch_info
)
1974 struct iwl3945_eeprom_txpower_group
*ch_grp
= &priv
->eeprom
.groups
[0];
1976 u16 group_index
= 0; /* based on factory calib frequencies */
1979 /* Find the group index for the channel ... don't use index 1(?) */
1980 if (is_channel_a_band(ch_info
)) {
1981 for (group
= 1; group
< 5; group
++) {
1982 grp_channel
= ch_grp
[group
].group_channel
;
1983 if (ch_info
->channel
<= grp_channel
) {
1984 group_index
= group
;
1988 /* group 4 has a few channels *above* its factory cal freq */
1992 group_index
= 0; /* 2.4 GHz, group 0 */
1994 IWL_DEBUG_POWER("Chnl %d mapped to grp %d\n", ch_info
->channel
,
2000 * iwl3945_hw_reg_get_matched_power_index - Interpolate to get nominal index
2002 * Interpolate to get nominal (i.e. at factory calibration temperature) index
2003 * into radio/DSP gain settings table for requested power.
2005 static int iwl3945_hw_reg_get_matched_power_index(struct iwl3945_priv
*priv
,
2007 s32 setting_index
, s32
*new_index
)
2009 const struct iwl3945_eeprom_txpower_group
*chnl_grp
= NULL
;
2011 s32 power
= 2 * requested_power
;
2013 const struct iwl3945_eeprom_txpower_sample
*samples
;
2018 chnl_grp
= &priv
->eeprom
.groups
[setting_index
];
2019 samples
= chnl_grp
->samples
;
2020 for (i
= 0; i
< 5; i
++) {
2021 if (power
== samples
[i
].power
) {
2022 *new_index
= samples
[i
].gain_index
;
2027 if (power
> samples
[1].power
) {
2030 } else if (power
> samples
[2].power
) {
2033 } else if (power
> samples
[3].power
) {
2041 denominator
= (s32
) samples
[index1
].power
- (s32
) samples
[index0
].power
;
2042 if (denominator
== 0)
2044 gains0
= (s32
) samples
[index0
].gain_index
* (1 << 19);
2045 gains1
= (s32
) samples
[index1
].gain_index
* (1 << 19);
2046 res
= gains0
+ (gains1
- gains0
) *
2047 ((s32
) power
- (s32
) samples
[index0
].power
) / denominator
+
2049 *new_index
= res
>> 19;
2053 static void iwl3945_hw_reg_init_channel_groups(struct iwl3945_priv
*priv
)
2057 const struct iwl3945_eeprom_txpower_group
*group
;
2059 IWL_DEBUG_POWER("Initializing factory calib info from EEPROM\n");
2061 for (i
= 0; i
< IWL_NUM_TX_CALIB_GROUPS
; i
++) {
2062 s8
*clip_pwrs
; /* table of power levels for each rate */
2063 s8 satur_pwr
; /* saturation power for each chnl group */
2064 group
= &priv
->eeprom
.groups
[i
];
2066 /* sanity check on factory saturation power value */
2067 if (group
->saturation_power
< 40) {
2068 IWL_WARNING("Error: saturation power is %d, "
2069 "less than minimum expected 40\n",
2070 group
->saturation_power
);
2075 * Derive requested power levels for each rate, based on
2076 * hardware capabilities (saturation power for band).
2077 * Basic value is 3dB down from saturation, with further
2078 * power reductions for highest 3 data rates. These
2079 * backoffs provide headroom for high rate modulation
2080 * power peaks, without too much distortion (clipping).
2082 /* we'll fill in this array with h/w max power levels */
2083 clip_pwrs
= (s8
*) priv
->clip_groups
[i
].clip_powers
;
2085 /* divide factory saturation power by 2 to find -3dB level */
2086 satur_pwr
= (s8
) (group
->saturation_power
>> 1);
2088 /* fill in channel group's nominal powers for each rate */
2089 for (rate_index
= 0;
2090 rate_index
< IWL_RATE_COUNT
; rate_index
++, clip_pwrs
++) {
2091 switch (rate_index
) {
2092 case IWL_RATE_36M_INDEX_TABLE
:
2093 if (i
== 0) /* B/G */
2094 *clip_pwrs
= satur_pwr
;
2096 *clip_pwrs
= satur_pwr
- 5;
2098 case IWL_RATE_48M_INDEX_TABLE
:
2100 *clip_pwrs
= satur_pwr
- 7;
2102 *clip_pwrs
= satur_pwr
- 10;
2104 case IWL_RATE_54M_INDEX_TABLE
:
2106 *clip_pwrs
= satur_pwr
- 9;
2108 *clip_pwrs
= satur_pwr
- 12;
2111 *clip_pwrs
= satur_pwr
;
2119 * iwl3945_txpower_set_from_eeprom - Set channel power info based on EEPROM
2121 * Second pass (during init) to set up priv->channel_info
2123 * Set up Tx-power settings in our channel info database for each VALID
2124 * (for this geo/SKU) channel, at all Tx data rates, based on eeprom values
2125 * and current temperature.
2127 * Since this is based on current temperature (at init time), these values may
2128 * not be valid for very long, but it gives us a starting/default point,
2129 * and allows us to active (i.e. using Tx) scan.
2131 * This does *not* write values to NIC, just sets up our internal table.
2133 int iwl3945_txpower_set_from_eeprom(struct iwl3945_priv
*priv
)
2135 struct iwl3945_channel_info
*ch_info
= NULL
;
2136 struct iwl3945_channel_power_info
*pwr_info
;
2140 const s8
*clip_pwrs
; /* array of power levels for each rate */
2143 u8 pwr_index
, base_pwr_index
, a_band
;
2147 /* save temperature reference,
2148 * so we can determine next time to calibrate */
2149 temperature
= iwl3945_hw_reg_txpower_get_temperature(priv
);
2150 priv
->last_temperature
= temperature
;
2152 iwl3945_hw_reg_init_channel_groups(priv
);
2154 /* initialize Tx power info for each and every channel, 2.4 and 5.x */
2155 for (i
= 0, ch_info
= priv
->channel_info
; i
< priv
->channel_count
;
2157 a_band
= is_channel_a_band(ch_info
);
2158 if (!is_channel_valid(ch_info
))
2161 /* find this channel's channel group (*not* "band") index */
2162 ch_info
->group_index
=
2163 iwl3945_hw_reg_get_ch_grp_index(priv
, ch_info
);
2165 /* Get this chnlgrp's rate->max/clip-powers table */
2166 clip_pwrs
= priv
->clip_groups
[ch_info
->group_index
].clip_powers
;
2168 /* calculate power index *adjustment* value according to
2169 * diff between current temperature and factory temperature */
2170 delta_index
= iwl3945_hw_reg_adjust_power_by_temp(temperature
,
2171 priv
->eeprom
.groups
[ch_info
->group_index
].
2174 IWL_DEBUG_POWER("Delta index for channel %d: %d [%d]\n",
2175 ch_info
->channel
, delta_index
, temperature
+
2178 /* set tx power value for all OFDM rates */
2179 for (rate_index
= 0; rate_index
< IWL_OFDM_RATES
;
2184 /* use channel group's clip-power table,
2185 * but don't exceed channel's max power */
2186 s8 pwr
= min(ch_info
->max_power_avg
,
2187 clip_pwrs
[rate_index
]);
2189 pwr_info
= &ch_info
->power_info
[rate_index
];
2191 /* get base (i.e. at factory-measured temperature)
2192 * power table index for this rate's power */
2193 rc
= iwl3945_hw_reg_get_matched_power_index(priv
, pwr
,
2194 ch_info
->group_index
,
2197 IWL_ERROR("Invalid power index\n");
2200 pwr_info
->base_power_index
= (u8
) power_idx
;
2202 /* temperature compensate */
2203 power_idx
+= delta_index
;
2205 /* stay within range of gain table */
2206 power_idx
= iwl3945_hw_reg_fix_power_index(power_idx
);
2208 /* fill 1 OFDM rate's iwl3945_channel_power_info struct */
2209 pwr_info
->requested_power
= pwr
;
2210 pwr_info
->power_table_index
= (u8
) power_idx
;
2211 pwr_info
->tpc
.tx_gain
=
2212 power_gain_table
[a_band
][power_idx
].tx_gain
;
2213 pwr_info
->tpc
.dsp_atten
=
2214 power_gain_table
[a_band
][power_idx
].dsp_atten
;
2217 /* set tx power for CCK rates, based on OFDM 12 Mbit settings*/
2218 pwr_info
= &ch_info
->power_info
[IWL_RATE_12M_INDEX_TABLE
];
2219 power
= pwr_info
->requested_power
+
2220 IWL_CCK_FROM_OFDM_POWER_DIFF
;
2221 pwr_index
= pwr_info
->power_table_index
+
2222 IWL_CCK_FROM_OFDM_INDEX_DIFF
;
2223 base_pwr_index
= pwr_info
->base_power_index
+
2224 IWL_CCK_FROM_OFDM_INDEX_DIFF
;
2226 /* stay within table range */
2227 pwr_index
= iwl3945_hw_reg_fix_power_index(pwr_index
);
2228 gain
= power_gain_table
[a_band
][pwr_index
].tx_gain
;
2229 dsp_atten
= power_gain_table
[a_band
][pwr_index
].dsp_atten
;
2231 /* fill each CCK rate's iwl3945_channel_power_info structure
2232 * NOTE: All CCK-rate Txpwrs are the same for a given chnl!
2233 * NOTE: CCK rates start at end of OFDM rates! */
2234 for (rate_index
= 0;
2235 rate_index
< IWL_CCK_RATES
; rate_index
++) {
2236 pwr_info
= &ch_info
->power_info
[rate_index
+IWL_OFDM_RATES
];
2237 pwr_info
->requested_power
= power
;
2238 pwr_info
->power_table_index
= pwr_index
;
2239 pwr_info
->base_power_index
= base_pwr_index
;
2240 pwr_info
->tpc
.tx_gain
= gain
;
2241 pwr_info
->tpc
.dsp_atten
= dsp_atten
;
2244 /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
2245 for (scan_tbl_index
= 0;
2246 scan_tbl_index
< IWL_NUM_SCAN_RATES
; scan_tbl_index
++) {
2247 s32 actual_index
= (scan_tbl_index
== 0) ?
2248 IWL_RATE_1M_INDEX_TABLE
: IWL_RATE_6M_INDEX_TABLE
;
2249 iwl3945_hw_reg_set_scan_power(priv
, scan_tbl_index
,
2250 actual_index
, clip_pwrs
, ch_info
, a_band
);
2257 int iwl3945_hw_rxq_stop(struct iwl3945_priv
*priv
)
2260 unsigned long flags
;
2262 spin_lock_irqsave(&priv
->lock
, flags
);
2263 rc
= iwl3945_grab_nic_access(priv
);
2265 spin_unlock_irqrestore(&priv
->lock
, flags
);
2269 iwl3945_write_direct32(priv
, FH_RCSR_CONFIG(0), 0);
2270 rc
= iwl3945_poll_direct_bit(priv
, FH_RSSR_STATUS
, (1 << 24), 1000);
2272 IWL_ERROR("Can't stop Rx DMA.\n");
2274 iwl3945_release_nic_access(priv
);
2275 spin_unlock_irqrestore(&priv
->lock
, flags
);
2280 int iwl3945_hw_tx_queue_init(struct iwl3945_priv
*priv
, struct iwl3945_tx_queue
*txq
)
2283 unsigned long flags
;
2284 int txq_id
= txq
->q
.id
;
2286 struct iwl3945_shared
*shared_data
= priv
->hw_setting
.shared_virt
;
2288 shared_data
->tx_base_ptr
[txq_id
] = cpu_to_le32((u32
)txq
->q
.dma_addr
);
2290 spin_lock_irqsave(&priv
->lock
, flags
);
2291 rc
= iwl3945_grab_nic_access(priv
);
2293 spin_unlock_irqrestore(&priv
->lock
, flags
);
2296 iwl3945_write_direct32(priv
, FH_CBCC_CTRL(txq_id
), 0);
2297 iwl3945_write_direct32(priv
, FH_CBCC_BASE(txq_id
), 0);
2299 iwl3945_write_direct32(priv
, FH_TCSR_CONFIG(txq_id
),
2300 ALM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT
|
2301 ALM_FH_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF
|
2302 ALM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD
|
2303 ALM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL
|
2304 ALM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE
);
2305 iwl3945_release_nic_access(priv
);
2307 /* fake read to flush all prev. writes */
2308 iwl3945_read32(priv
, FH_TSSR_CBB_BASE
);
2309 spin_unlock_irqrestore(&priv
->lock
, flags
);
2314 int iwl3945_hw_get_rx_read(struct iwl3945_priv
*priv
)
2316 struct iwl3945_shared
*shared_data
= priv
->hw_setting
.shared_virt
;
2318 return le32_to_cpu(shared_data
->rx_read_ptr
[0]);
2322 * iwl3945_init_hw_rate_table - Initialize the hardware rate fallback table
2324 int iwl3945_init_hw_rate_table(struct iwl3945_priv
*priv
)
2326 int rc
, i
, index
, prev_index
;
2327 struct iwl3945_rate_scaling_cmd rate_cmd
= {
2328 .reserved
= {0, 0, 0},
2330 struct iwl3945_rate_scaling_info
*table
= rate_cmd
.table
;
2332 for (i
= 0; i
< ARRAY_SIZE(iwl3945_rates
); i
++) {
2333 index
= iwl3945_rates
[i
].table_rs_index
;
2335 table
[index
].rate_n_flags
=
2336 iwl3945_hw_set_rate_n_flags(iwl3945_rates
[i
].plcp
, 0);
2337 table
[index
].try_cnt
= priv
->retry_rate
;
2338 prev_index
= iwl3945_get_prev_ieee_rate(i
);
2339 table
[index
].next_rate_index
= iwl3945_rates
[prev_index
].table_rs_index
;
2342 switch (priv
->band
) {
2343 case IEEE80211_BAND_5GHZ
:
2344 IWL_DEBUG_RATE("Select A mode rate scale\n");
2345 /* If one of the following CCK rates is used,
2346 * have it fall back to the 6M OFDM rate */
2347 for (i
= IWL_RATE_1M_INDEX_TABLE
; i
<= IWL_RATE_11M_INDEX_TABLE
; i
++)
2348 table
[i
].next_rate_index
= iwl3945_rates
[IWL_FIRST_OFDM_RATE
].table_rs_index
;
2350 /* Don't fall back to CCK rates */
2351 table
[IWL_RATE_12M_INDEX_TABLE
].next_rate_index
= IWL_RATE_9M_INDEX_TABLE
;
2353 /* Don't drop out of OFDM rates */
2354 table
[IWL_RATE_6M_INDEX_TABLE
].next_rate_index
=
2355 iwl3945_rates
[IWL_FIRST_OFDM_RATE
].table_rs_index
;
2358 case IEEE80211_BAND_2GHZ
:
2359 IWL_DEBUG_RATE("Select B/G mode rate scale\n");
2360 /* If an OFDM rate is used, have it fall back to the
2362 for (i
= IWL_RATE_6M_INDEX_TABLE
; i
<= IWL_RATE_54M_INDEX_TABLE
; i
++)
2363 table
[i
].next_rate_index
= iwl3945_rates
[IWL_FIRST_CCK_RATE
].table_rs_index
;
2365 /* CCK shouldn't fall back to OFDM... */
2366 table
[IWL_RATE_11M_INDEX_TABLE
].next_rate_index
= IWL_RATE_5M_INDEX_TABLE
;
2374 /* Update the rate scaling for control frame Tx */
2375 rate_cmd
.table_id
= 0;
2376 rc
= iwl3945_send_cmd_pdu(priv
, REPLY_RATE_SCALE
, sizeof(rate_cmd
),
2381 /* Update the rate scaling for data frame Tx */
2382 rate_cmd
.table_id
= 1;
2383 return iwl3945_send_cmd_pdu(priv
, REPLY_RATE_SCALE
, sizeof(rate_cmd
),
2387 /* Called when initializing driver */
2388 int iwl3945_hw_set_hw_setting(struct iwl3945_priv
*priv
)
2390 memset((void *)&priv
->hw_setting
, 0,
2391 sizeof(struct iwl3945_driver_hw_info
));
2393 priv
->hw_setting
.shared_virt
=
2394 pci_alloc_consistent(priv
->pci_dev
,
2395 sizeof(struct iwl3945_shared
),
2396 &priv
->hw_setting
.shared_phys
);
2398 if (!priv
->hw_setting
.shared_virt
) {
2399 IWL_ERROR("failed to allocate pci memory\n");
2400 mutex_unlock(&priv
->mutex
);
2404 priv
->hw_setting
.rx_buf_size
= IWL_RX_BUF_SIZE
;
2405 priv
->hw_setting
.max_pkt_size
= 2342;
2406 priv
->hw_setting
.tx_cmd_len
= sizeof(struct iwl3945_tx_cmd
);
2407 priv
->hw_setting
.max_rxq_size
= RX_QUEUE_SIZE
;
2408 priv
->hw_setting
.max_rxq_log
= RX_QUEUE_SIZE_LOG
;
2409 priv
->hw_setting
.max_stations
= IWL3945_STATION_COUNT
;
2410 priv
->hw_setting
.bcast_sta_id
= IWL3945_BROADCAST_ID
;
2412 priv
->hw_setting
.tx_ant_num
= 2;
2416 unsigned int iwl3945_hw_get_beacon_cmd(struct iwl3945_priv
*priv
,
2417 struct iwl3945_frame
*frame
, u8 rate
)
2419 struct iwl3945_tx_beacon_cmd
*tx_beacon_cmd
;
2420 unsigned int frame_size
;
2422 tx_beacon_cmd
= (struct iwl3945_tx_beacon_cmd
*)&frame
->u
;
2423 memset(tx_beacon_cmd
, 0, sizeof(*tx_beacon_cmd
));
2425 tx_beacon_cmd
->tx
.sta_id
= priv
->hw_setting
.bcast_sta_id
;
2426 tx_beacon_cmd
->tx
.stop_time
.life_time
= TX_CMD_LIFE_TIME_INFINITE
;
2428 frame_size
= iwl3945_fill_beacon_frame(priv
,
2429 tx_beacon_cmd
->frame
,
2430 iwl3945_broadcast_addr
,
2431 sizeof(frame
->u
) - sizeof(*tx_beacon_cmd
));
2433 BUG_ON(frame_size
> MAX_MPDU_SIZE
);
2434 tx_beacon_cmd
->tx
.len
= cpu_to_le16((u16
)frame_size
);
2436 tx_beacon_cmd
->tx
.rate
= rate
;
2437 tx_beacon_cmd
->tx
.tx_flags
= (TX_CMD_FLG_SEQ_CTL_MSK
|
2438 TX_CMD_FLG_TSF_MSK
);
2440 /* supp_rates[0] == OFDM start at IWL_FIRST_OFDM_RATE*/
2441 tx_beacon_cmd
->tx
.supp_rates
[0] =
2442 (IWL_OFDM_BASIC_RATES_MASK
>> IWL_FIRST_OFDM_RATE
) & 0xFF;
2444 tx_beacon_cmd
->tx
.supp_rates
[1] =
2445 (IWL_CCK_BASIC_RATES_MASK
& 0xF);
2447 return sizeof(struct iwl3945_tx_beacon_cmd
) + frame_size
;
2450 void iwl3945_hw_rx_handler_setup(struct iwl3945_priv
*priv
)
2452 priv
->rx_handlers
[REPLY_TX
] = iwl3945_rx_reply_tx
;
2453 priv
->rx_handlers
[REPLY_3945_RX
] = iwl3945_rx_reply_rx
;
2456 void iwl3945_hw_setup_deferred_work(struct iwl3945_priv
*priv
)
2458 INIT_DELAYED_WORK(&priv
->thermal_periodic
,
2459 iwl3945_bg_reg_txpower_periodic
);
2462 void iwl3945_hw_cancel_deferred_work(struct iwl3945_priv
*priv
)
2464 cancel_delayed_work(&priv
->thermal_periodic
);
2467 static struct iwl_3945_cfg iwl3945_bg_cfg
= {
2469 .fw_name
= "iwlwifi-3945" IWL3945_UCODE_API
".ucode",
2473 static struct iwl_3945_cfg iwl3945_abg_cfg
= {
2475 .fw_name
= "iwlwifi-3945" IWL3945_UCODE_API
".ucode",
2476 .sku
= IWL_SKU_A
|IWL_SKU_G
,
2479 struct pci_device_id iwl3945_hw_card_ids
[] = {
2480 {IWL_PCI_DEVICE(0x4222, 0x1005, iwl3945_bg_cfg
)},
2481 {IWL_PCI_DEVICE(0x4222, 0x1034, iwl3945_bg_cfg
)},
2482 {IWL_PCI_DEVICE(0x4222, 0x1044, iwl3945_bg_cfg
)},
2483 {IWL_PCI_DEVICE(0x4227, 0x1014, iwl3945_bg_cfg
)},
2484 {IWL_PCI_DEVICE(0x4222, PCI_ANY_ID
, iwl3945_abg_cfg
)},
2485 {IWL_PCI_DEVICE(0x4227, PCI_ANY_ID
, iwl3945_abg_cfg
)},
2489 MODULE_DEVICE_TABLE(pci
, iwl3945_hw_card_ids
);