1 /******************************************************************************
3 * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
21 * Contact Information:
22 * Intel Linux Wireless <ilw@linux.intel.com>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 *****************************************************************************/
27 #include <linux/kernel.h>
28 #include <linux/module.h>
29 #include <linux/init.h>
30 #include <linux/pci.h>
31 #include <linux/dma-mapping.h>
32 #include <linux/delay.h>
33 #include <linux/skbuff.h>
34 #include <linux/netdevice.h>
35 #include <linux/wireless.h>
36 #include <net/mac80211.h>
37 #include <linux/etherdevice.h>
38 #include <asm/unaligned.h>
40 #include "iwl-eeprom.h"
46 #include "iwl-helpers.h"
47 #include "iwl-agn-hw.h"
48 #include "iwl-6000-hw.h"
49 #include "iwl-agn-led.h"
50 #include "iwl-agn-debugfs.h"
52 /* Highest firmware API version supported */
53 #define IWL6000_UCODE_API_MAX 4
54 #define IWL6050_UCODE_API_MAX 4
55 #define IWL6000G2_UCODE_API_MAX 4
57 /* Lowest firmware API version supported */
58 #define IWL6000_UCODE_API_MIN 4
59 #define IWL6050_UCODE_API_MIN 4
60 #define IWL6000G2_UCODE_API_MIN 4
62 #define IWL6000_FW_PRE "iwlwifi-6000-"
63 #define _IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE #api ".ucode"
64 #define IWL6000_MODULE_FIRMWARE(api) _IWL6000_MODULE_FIRMWARE(api)
66 #define IWL6050_FW_PRE "iwlwifi-6050-"
67 #define _IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE #api ".ucode"
68 #define IWL6050_MODULE_FIRMWARE(api) _IWL6050_MODULE_FIRMWARE(api)
70 #define IWL6000G2A_FW_PRE "iwlwifi-6000g2a-"
71 #define _IWL6000G2A_MODULE_FIRMWARE(api) IWL6000G2A_FW_PRE #api ".ucode"
72 #define IWL6000G2A_MODULE_FIRMWARE(api) _IWL6000G2A_MODULE_FIRMWARE(api)
74 #define IWL6000G2B_FW_PRE "iwlwifi-6000g2b-"
75 #define _IWL6000G2B_MODULE_FIRMWARE(api) IWL6000G2B_FW_PRE #api ".ucode"
76 #define IWL6000G2B_MODULE_FIRMWARE(api) _IWL6000G2B_MODULE_FIRMWARE(api)
79 static void iwl6000_set_ct_threshold(struct iwl_priv
*priv
)
82 priv
->hw_params
.ct_kill_threshold
= CT_KILL_THRESHOLD
;
83 priv
->hw_params
.ct_kill_exit_threshold
= CT_KILL_EXIT_THRESHOLD
;
86 /* Indicate calibration version to uCode. */
87 static void iwl6000_set_calib_version(struct iwl_priv
*priv
)
89 if (priv
->cfg
->need_dc_calib
&&
90 (priv
->cfg
->ops
->lib
->eeprom_ops
.calib_version(priv
) >= 6))
91 iwl_set_bit(priv
, CSR_GP_DRIVER_REG
,
92 CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6
);
95 /* NIC configuration for 6000 series */
96 static void iwl6000_nic_config(struct iwl_priv
*priv
)
100 radio_cfg
= iwl_eeprom_query16(priv
, EEPROM_RADIO_CONFIG
);
102 /* write radio config values to register */
103 if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg
) <= EEPROM_RF_CONFIG_TYPE_MAX
)
104 iwl_set_bit(priv
, CSR_HW_IF_CONFIG_REG
,
105 EEPROM_RF_CFG_TYPE_MSK(radio_cfg
) |
106 EEPROM_RF_CFG_STEP_MSK(radio_cfg
) |
107 EEPROM_RF_CFG_DASH_MSK(radio_cfg
));
109 /* set CSR_HW_CONFIG_REG for uCode use */
110 iwl_set_bit(priv
, CSR_HW_IF_CONFIG_REG
,
111 CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI
|
112 CSR_HW_IF_CONFIG_REG_BIT_MAC_SI
);
114 /* no locking required for register write */
115 if (priv
->cfg
->pa_type
== IWL_PA_INTERNAL
) {
116 /* 2x2 IPA phy type */
117 iwl_write32(priv
, CSR_GP_DRIVER_REG
,
118 CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA
);
120 /* else do nothing, uCode configured */
121 if (priv
->cfg
->ops
->lib
->temp_ops
.set_calib_version
)
122 priv
->cfg
->ops
->lib
->temp_ops
.set_calib_version(priv
);
125 static struct iwl_sensitivity_ranges iwl6000_sensitivity
= {
127 .max_nrg_cck
= 0, /* not used, set to 0 */
128 .auto_corr_min_ofdm
= 80,
129 .auto_corr_min_ofdm_mrc
= 128,
130 .auto_corr_min_ofdm_x1
= 105,
131 .auto_corr_min_ofdm_mrc_x1
= 192,
133 .auto_corr_max_ofdm
= 145,
134 .auto_corr_max_ofdm_mrc
= 232,
135 .auto_corr_max_ofdm_x1
= 110,
136 .auto_corr_max_ofdm_mrc_x1
= 232,
138 .auto_corr_min_cck
= 125,
139 .auto_corr_max_cck
= 175,
140 .auto_corr_min_cck_mrc
= 160,
141 .auto_corr_max_cck_mrc
= 310,
145 .barker_corr_th_min
= 190,
146 .barker_corr_th_min_mrc
= 390,
150 static int iwl6000_hw_set_hw_params(struct iwl_priv
*priv
)
152 if (priv
->cfg
->mod_params
->num_of_queues
>= IWL_MIN_NUM_QUEUES
&&
153 priv
->cfg
->mod_params
->num_of_queues
<= IWLAGN_NUM_QUEUES
)
154 priv
->cfg
->num_of_queues
=
155 priv
->cfg
->mod_params
->num_of_queues
;
157 priv
->hw_params
.max_txq_num
= priv
->cfg
->num_of_queues
;
158 priv
->hw_params
.dma_chnl_num
= FH50_TCSR_CHNL_NUM
;
159 priv
->hw_params
.scd_bc_tbls_size
=
160 priv
->cfg
->num_of_queues
*
161 sizeof(struct iwlagn_scd_bc_tbl
);
162 priv
->hw_params
.tfd_size
= sizeof(struct iwl_tfd
);
163 priv
->hw_params
.max_stations
= IWL5000_STATION_COUNT
;
164 priv
->hw_params
.bcast_sta_id
= IWL5000_BROADCAST_ID
;
166 priv
->hw_params
.max_data_size
= IWL60_RTC_DATA_SIZE
;
167 priv
->hw_params
.max_inst_size
= IWL60_RTC_INST_SIZE
;
169 priv
->hw_params
.max_bsm_size
= 0;
170 priv
->hw_params
.ht40_channel
= BIT(IEEE80211_BAND_2GHZ
) |
171 BIT(IEEE80211_BAND_5GHZ
);
172 priv
->hw_params
.rx_wrt_ptr_reg
= FH_RSCSR_CHNL0_WPTR
;
174 priv
->hw_params
.tx_chains_num
= num_of_ant(priv
->cfg
->valid_tx_ant
);
175 priv
->hw_params
.rx_chains_num
= num_of_ant(priv
->cfg
->valid_rx_ant
);
176 priv
->hw_params
.valid_tx_ant
= priv
->cfg
->valid_tx_ant
;
177 priv
->hw_params
.valid_rx_ant
= priv
->cfg
->valid_rx_ant
;
179 if (priv
->cfg
->ops
->lib
->temp_ops
.set_ct_kill
)
180 priv
->cfg
->ops
->lib
->temp_ops
.set_ct_kill(priv
);
182 /* Set initial sensitivity parameters */
183 /* Set initial calibration set */
184 priv
->hw_params
.sens
= &iwl6000_sensitivity
;
185 priv
->hw_params
.calib_init_cfg
=
186 BIT(IWL_CALIB_XTAL
) |
188 BIT(IWL_CALIB_TX_IQ
) |
189 BIT(IWL_CALIB_BASE_BAND
);
190 if (priv
->cfg
->need_dc_calib
)
191 priv
->hw_params
.calib_init_cfg
|= BIT(IWL_CALIB_DC
);
193 priv
->hw_params
.beacon_time_tsf_bits
= IWLAGN_EXT_BEACON_TIME_POS
;
198 static int iwl6000_hw_channel_switch(struct iwl_priv
*priv
,
199 struct ieee80211_channel_switch
*ch_switch
)
201 struct iwl6000_channel_switch_cmd cmd
;
202 const struct iwl_channel_info
*ch_info
;
203 u32 switch_time_in_usec
, ucode_switch_time
;
207 u16 beacon_interval
= le16_to_cpu(priv
->rxon_timing
.beacon_interval
);
208 struct ieee80211_vif
*vif
= priv
->vif
;
209 struct iwl_host_cmd hcmd
= {
210 .id
= REPLY_CHANNEL_SWITCH
,
216 cmd
.band
= priv
->band
== IEEE80211_BAND_2GHZ
;
217 ch
= ieee80211_frequency_to_channel(ch_switch
->channel
->center_freq
);
218 IWL_DEBUG_11H(priv
, "channel switch from %u to %u\n",
219 priv
->active_rxon
.channel
, ch
);
220 cmd
.channel
= cpu_to_le16(ch
);
221 cmd
.rxon_flags
= priv
->staging_rxon
.flags
;
222 cmd
.rxon_filter_flags
= priv
->staging_rxon
.filter_flags
;
223 switch_count
= ch_switch
->count
;
224 tsf_low
= ch_switch
->timestamp
& 0x0ffffffff;
226 * calculate the ucode channel switch time
227 * adding TSF as one of the factor for when to switch
229 if ((priv
->ucode_beacon_time
> tsf_low
) && beacon_interval
) {
230 if (switch_count
> ((priv
->ucode_beacon_time
- tsf_low
) /
232 switch_count
-= (priv
->ucode_beacon_time
-
233 tsf_low
) / beacon_interval
;
237 if (switch_count
<= 1)
238 cmd
.switch_time
= cpu_to_le32(priv
->ucode_beacon_time
);
240 switch_time_in_usec
=
241 vif
->bss_conf
.beacon_int
* switch_count
* TIME_UNIT
;
242 ucode_switch_time
= iwl_usecs_to_beacons(priv
,
245 cmd
.switch_time
= iwl_add_beacon_time(priv
,
246 priv
->ucode_beacon_time
,
250 IWL_DEBUG_11H(priv
, "uCode time for the switch is 0x%x\n",
252 ch_info
= iwl_get_channel_info(priv
, priv
->band
, ch
);
254 cmd
.expect_beacon
= is_channel_radar(ch_info
);
256 IWL_ERR(priv
, "invalid channel switch from %u to %u\n",
257 priv
->active_rxon
.channel
, ch
);
260 priv
->switch_rxon
.channel
= cmd
.channel
;
261 priv
->switch_rxon
.switch_in_progress
= true;
263 return iwl_send_cmd_sync(priv
, &hcmd
);
266 static struct iwl_lib_ops iwl6000_lib
= {
267 .set_hw_params
= iwl6000_hw_set_hw_params
,
268 .txq_update_byte_cnt_tbl
= iwlagn_txq_update_byte_cnt_tbl
,
269 .txq_inval_byte_cnt_tbl
= iwlagn_txq_inval_byte_cnt_tbl
,
270 .txq_set_sched
= iwlagn_txq_set_sched
,
271 .txq_agg_enable
= iwlagn_txq_agg_enable
,
272 .txq_agg_disable
= iwlagn_txq_agg_disable
,
273 .txq_attach_buf_to_tfd
= iwl_hw_txq_attach_buf_to_tfd
,
274 .txq_free_tfd
= iwl_hw_txq_free_tfd
,
275 .txq_init
= iwl_hw_tx_queue_init
,
276 .rx_handler_setup
= iwlagn_rx_handler_setup
,
277 .setup_deferred_work
= iwlagn_setup_deferred_work
,
278 .is_valid_rtc_data_addr
= iwlagn_hw_valid_rtc_data_addr
,
279 .load_ucode
= iwlagn_load_ucode
,
280 .dump_nic_event_log
= iwl_dump_nic_event_log
,
281 .dump_nic_error_log
= iwl_dump_nic_error_log
,
282 .dump_csr
= iwl_dump_csr
,
283 .dump_fh
= iwl_dump_fh
,
284 .init_alive_start
= iwlagn_init_alive_start
,
285 .alive_notify
= iwlagn_alive_notify
,
286 .send_tx_power
= iwlagn_send_tx_power
,
287 .update_chain_flags
= iwl_update_chain_flags
,
288 .set_channel_switch
= iwl6000_hw_channel_switch
,
290 .init
= iwl_apm_init
,
291 .stop
= iwl_apm_stop
,
292 .config
= iwl6000_nic_config
,
293 .set_pwr_src
= iwl_set_pwr_src
,
296 .regulatory_bands
= {
297 EEPROM_REG_BAND_1_CHANNELS
,
298 EEPROM_REG_BAND_2_CHANNELS
,
299 EEPROM_REG_BAND_3_CHANNELS
,
300 EEPROM_REG_BAND_4_CHANNELS
,
301 EEPROM_REG_BAND_5_CHANNELS
,
302 EEPROM_6000_REG_BAND_24_HT40_CHANNELS
,
303 EEPROM_REG_BAND_52_HT40_CHANNELS
305 .verify_signature
= iwlcore_eeprom_verify_signature
,
306 .acquire_semaphore
= iwlcore_eeprom_acquire_semaphore
,
307 .release_semaphore
= iwlcore_eeprom_release_semaphore
,
308 .calib_version
= iwlagn_eeprom_calib_version
,
309 .query_addr
= iwlagn_eeprom_query_addr
,
310 .update_enhanced_txpower
= iwlcore_eeprom_enhanced_txpower
,
312 .post_associate
= iwl_post_associate
,
314 .config_ap
= iwl_config_ap
,
316 .temperature
= iwlagn_temperature
,
317 .set_ct_kill
= iwl6000_set_ct_threshold
,
318 .set_calib_version
= iwl6000_set_calib_version
,
320 .manage_ibss_station
= iwlagn_manage_ibss_station
,
321 .update_bcast_station
= iwl_update_bcast_station
,
323 .rx_stats_read
= iwl_ucode_rx_stats_read
,
324 .tx_stats_read
= iwl_ucode_tx_stats_read
,
325 .general_stats_read
= iwl_ucode_general_stats_read
,
327 .recover_from_tx_stall
= iwl_bg_monitor_recover
,
328 .check_plcp_health
= iwl_good_plcp_health
,
329 .check_ack_health
= iwl_good_ack_health
,
330 .txfifo_flush
= iwlagn_txfifo_flush
,
331 .dev_txfifo_flush
= iwlagn_dev_txfifo_flush
,
334 static const struct iwl_ops iwl6000_ops
= {
336 .hcmd
= &iwlagn_hcmd
,
337 .utils
= &iwlagn_hcmd_utils
,
338 .led
= &iwlagn_led_ops
,
341 static void do_not_send_bt_config(struct iwl_priv
*priv
)
345 static struct iwl_hcmd_ops iwl6000g2b_hcmd
= {
346 .rxon_assoc
= iwlagn_send_rxon_assoc
,
347 .commit_rxon
= iwl_commit_rxon
,
348 .set_rxon_chain
= iwl_set_rxon_chain
,
349 .set_tx_ant
= iwlagn_send_tx_ant_config
,
350 .send_bt_config
= do_not_send_bt_config
,
353 static const struct iwl_ops iwl6000g2b_ops
= {
355 .hcmd
= &iwl6000g2b_hcmd
,
356 .utils
= &iwlagn_hcmd_utils
,
357 .led
= &iwlagn_led_ops
,
360 struct iwl_cfg iwl6000g2a_2agn_cfg
= {
361 .name
= "6000 Series 2x2 AGN Gen2a",
362 .fw_name_pre
= IWL6000G2A_FW_PRE
,
363 .ucode_api_max
= IWL6000G2_UCODE_API_MAX
,
364 .ucode_api_min
= IWL6000G2_UCODE_API_MIN
,
365 .sku
= IWL_SKU_A
|IWL_SKU_G
|IWL_SKU_N
,
367 .eeprom_size
= OTP_LOW_IMAGE_SIZE
,
368 .eeprom_ver
= EEPROM_6000G2_EEPROM_VERSION
,
369 .eeprom_calib_ver
= EEPROM_6000G2_TX_POWER_VERSION
,
370 .num_of_queues
= IWLAGN_NUM_QUEUES
,
371 .num_of_ampdu_queues
= IWLAGN_NUM_AMPDU_QUEUES
,
372 .mod_params
= &iwlagn_mod_params
,
373 .valid_tx_ant
= ANT_AB
,
374 .valid_rx_ant
= ANT_AB
,
378 .pa_type
= IWL_PA_SYSTEM
,
379 .max_ll_items
= OTP_MAX_LL_ITEMS_6x00
,
380 .shadow_ram_support
= true,
381 .ht_greenfield_support
= true,
382 .led_compensation
= 51,
383 .use_rts_for_ht
= true, /* use rts/cts protection */
384 .chain_noise_num_beacons
= IWL_CAL_NUM_BEACONS
,
385 .supports_idle
= true,
386 .adv_thermal_throttle
= true,
387 .support_ct_kill_exit
= true,
388 .plcp_delta_threshold
= IWL_MAX_PLCP_ERR_THRESHOLD_DEF
,
389 .chain_noise_scale
= 1000,
390 .monitor_recover_period
= IWL_MONITORING_PERIOD
,
391 .max_event_log_size
= 512,
392 .ucode_tracing
= true,
393 .sensitivity_calib_by_driver
= true,
394 .chain_noise_calib_by_driver
= true,
395 .need_dc_calib
= true,
398 struct iwl_cfg iwl6000g2a_2abg_cfg
= {
399 .name
= "6000 Series 2x2 ABG Gen2a",
400 .fw_name_pre
= IWL6000G2A_FW_PRE
,
401 .ucode_api_max
= IWL6000G2_UCODE_API_MAX
,
402 .ucode_api_min
= IWL6000G2_UCODE_API_MIN
,
403 .sku
= IWL_SKU_A
|IWL_SKU_G
,
405 .eeprom_size
= OTP_LOW_IMAGE_SIZE
,
406 .eeprom_ver
= EEPROM_6000G2_EEPROM_VERSION
,
407 .eeprom_calib_ver
= EEPROM_6000G2_TX_POWER_VERSION
,
408 .num_of_queues
= IWLAGN_NUM_QUEUES
,
409 .num_of_ampdu_queues
= IWLAGN_NUM_AMPDU_QUEUES
,
410 .mod_params
= &iwlagn_mod_params
,
411 .valid_tx_ant
= ANT_AB
,
412 .valid_rx_ant
= ANT_AB
,
416 .pa_type
= IWL_PA_SYSTEM
,
417 .max_ll_items
= OTP_MAX_LL_ITEMS_6x00
,
418 .shadow_ram_support
= true,
419 .led_compensation
= 51,
420 .chain_noise_num_beacons
= IWL_CAL_NUM_BEACONS
,
421 .supports_idle
= true,
422 .adv_thermal_throttle
= true,
423 .support_ct_kill_exit
= true,
424 .plcp_delta_threshold
= IWL_MAX_PLCP_ERR_THRESHOLD_DEF
,
425 .chain_noise_scale
= 1000,
426 .monitor_recover_period
= IWL_MONITORING_PERIOD
,
427 .max_event_log_size
= 512,
428 .sensitivity_calib_by_driver
= true,
429 .chain_noise_calib_by_driver
= true,
430 .need_dc_calib
= true,
433 struct iwl_cfg iwl6000g2a_2bg_cfg
= {
434 .name
= "6000 Series 2x2 BG Gen2a",
435 .fw_name_pre
= IWL6000G2A_FW_PRE
,
436 .ucode_api_max
= IWL6000G2_UCODE_API_MAX
,
437 .ucode_api_min
= IWL6000G2_UCODE_API_MIN
,
440 .eeprom_size
= OTP_LOW_IMAGE_SIZE
,
441 .eeprom_ver
= EEPROM_6000G2_EEPROM_VERSION
,
442 .eeprom_calib_ver
= EEPROM_6000G2_TX_POWER_VERSION
,
443 .num_of_queues
= IWLAGN_NUM_QUEUES
,
444 .num_of_ampdu_queues
= IWLAGN_NUM_AMPDU_QUEUES
,
445 .mod_params
= &iwlagn_mod_params
,
446 .valid_tx_ant
= ANT_AB
,
447 .valid_rx_ant
= ANT_AB
,
451 .pa_type
= IWL_PA_SYSTEM
,
452 .max_ll_items
= OTP_MAX_LL_ITEMS_6x00
,
453 .shadow_ram_support
= true,
454 .led_compensation
= 51,
455 .chain_noise_num_beacons
= IWL_CAL_NUM_BEACONS
,
456 .supports_idle
= true,
457 .adv_thermal_throttle
= true,
458 .support_ct_kill_exit
= true,
459 .plcp_delta_threshold
= IWL_MAX_PLCP_ERR_THRESHOLD_DEF
,
460 .chain_noise_scale
= 1000,
461 .monitor_recover_period
= IWL_MONITORING_PERIOD
,
462 .max_event_log_size
= 512,
463 .sensitivity_calib_by_driver
= true,
464 .chain_noise_calib_by_driver
= true,
465 .need_dc_calib
= true,
468 struct iwl_cfg iwl6000g2b_2agn_cfg
= {
469 .name
= "6000 Series 2x2 AGN Gen2b",
470 .fw_name_pre
= IWL6000G2B_FW_PRE
,
471 .ucode_api_max
= IWL6000G2_UCODE_API_MAX
,
472 .ucode_api_min
= IWL6000G2_UCODE_API_MIN
,
473 .sku
= IWL_SKU_A
|IWL_SKU_G
|IWL_SKU_N
,
474 .ops
= &iwl6000g2b_ops
,
475 .eeprom_size
= OTP_LOW_IMAGE_SIZE
,
476 .eeprom_ver
= EEPROM_6000G2_EEPROM_VERSION
,
477 .eeprom_calib_ver
= EEPROM_6000G2_TX_POWER_VERSION
,
478 .num_of_queues
= IWLAGN_NUM_QUEUES
,
479 .num_of_ampdu_queues
= IWLAGN_NUM_AMPDU_QUEUES
,
480 .mod_params
= &iwlagn_mod_params
,
481 .valid_tx_ant
= ANT_AB
,
482 .valid_rx_ant
= ANT_AB
,
486 .pa_type
= IWL_PA_SYSTEM
,
487 .max_ll_items
= OTP_MAX_LL_ITEMS_6x00
,
488 .shadow_ram_support
= true,
489 .ht_greenfield_support
= true,
490 .led_compensation
= 51,
491 .use_rts_for_ht
= true, /* use rts/cts protection */
492 .chain_noise_num_beacons
= IWL_CAL_NUM_BEACONS
,
493 .supports_idle
= true,
494 .adv_thermal_throttle
= true,
495 .support_ct_kill_exit
= true,
496 .plcp_delta_threshold
= IWL_MAX_PLCP_ERR_THRESHOLD_DEF
,
497 .chain_noise_scale
= 1000,
498 .monitor_recover_period
= IWL_MONITORING_PERIOD
,
499 .max_event_log_size
= 512,
500 .sensitivity_calib_by_driver
= true,
501 .chain_noise_calib_by_driver
= true,
502 .need_dc_calib
= true,
505 struct iwl_cfg iwl6000g2b_2abg_cfg
= {
506 .name
= "6000 Series 2x2 ABG Gen2b",
507 .fw_name_pre
= IWL6000G2B_FW_PRE
,
508 .ucode_api_max
= IWL6000G2_UCODE_API_MAX
,
509 .ucode_api_min
= IWL6000G2_UCODE_API_MIN
,
510 .sku
= IWL_SKU_A
|IWL_SKU_G
,
511 .ops
= &iwl6000g2b_ops
,
512 .eeprom_size
= OTP_LOW_IMAGE_SIZE
,
513 .eeprom_ver
= EEPROM_6000G2_EEPROM_VERSION
,
514 .eeprom_calib_ver
= EEPROM_6000G2_TX_POWER_VERSION
,
515 .num_of_queues
= IWLAGN_NUM_QUEUES
,
516 .num_of_ampdu_queues
= IWLAGN_NUM_AMPDU_QUEUES
,
517 .mod_params
= &iwlagn_mod_params
,
518 .valid_tx_ant
= ANT_AB
,
519 .valid_rx_ant
= ANT_AB
,
523 .pa_type
= IWL_PA_SYSTEM
,
524 .max_ll_items
= OTP_MAX_LL_ITEMS_6x00
,
525 .shadow_ram_support
= true,
526 .led_compensation
= 51,
527 .chain_noise_num_beacons
= IWL_CAL_NUM_BEACONS
,
528 .supports_idle
= true,
529 .adv_thermal_throttle
= true,
530 .support_ct_kill_exit
= true,
531 .plcp_delta_threshold
= IWL_MAX_PLCP_ERR_THRESHOLD_DEF
,
532 .chain_noise_scale
= 1000,
533 .monitor_recover_period
= IWL_MONITORING_PERIOD
,
534 .max_event_log_size
= 512,
535 .sensitivity_calib_by_driver
= true,
536 .chain_noise_calib_by_driver
= true,
537 .need_dc_calib
= true,
540 struct iwl_cfg iwl6000g2b_2bgn_cfg
= {
541 .name
= "6000 Series 2x2 BGN Gen2b",
542 .fw_name_pre
= IWL6000G2B_FW_PRE
,
543 .ucode_api_max
= IWL6000G2_UCODE_API_MAX
,
544 .ucode_api_min
= IWL6000G2_UCODE_API_MIN
,
545 .sku
= IWL_SKU_G
|IWL_SKU_N
,
546 .ops
= &iwl6000g2b_ops
,
547 .eeprom_size
= OTP_LOW_IMAGE_SIZE
,
548 .eeprom_ver
= EEPROM_6000G2_EEPROM_VERSION
,
549 .eeprom_calib_ver
= EEPROM_6000G2_TX_POWER_VERSION
,
550 .num_of_queues
= IWLAGN_NUM_QUEUES
,
551 .num_of_ampdu_queues
= IWLAGN_NUM_AMPDU_QUEUES
,
552 .mod_params
= &iwlagn_mod_params
,
553 .valid_tx_ant
= ANT_AB
,
554 .valid_rx_ant
= ANT_AB
,
558 .pa_type
= IWL_PA_SYSTEM
,
559 .max_ll_items
= OTP_MAX_LL_ITEMS_6x00
,
560 .shadow_ram_support
= true,
561 .ht_greenfield_support
= true,
562 .led_compensation
= 51,
563 .use_rts_for_ht
= true, /* use rts/cts protection */
564 .chain_noise_num_beacons
= IWL_CAL_NUM_BEACONS
,
565 .supports_idle
= true,
566 .adv_thermal_throttle
= true,
567 .support_ct_kill_exit
= true,
568 .plcp_delta_threshold
= IWL_MAX_PLCP_ERR_THRESHOLD_DEF
,
569 .chain_noise_scale
= 1000,
570 .monitor_recover_period
= IWL_MONITORING_PERIOD
,
571 .max_event_log_size
= 512,
572 .sensitivity_calib_by_driver
= true,
573 .chain_noise_calib_by_driver
= true,
574 .need_dc_calib
= true,
577 struct iwl_cfg iwl6000g2b_2bg_cfg
= {
578 .name
= "6000 Series 2x2 BG Gen2b",
579 .fw_name_pre
= IWL6000G2B_FW_PRE
,
580 .ucode_api_max
= IWL6000G2_UCODE_API_MAX
,
581 .ucode_api_min
= IWL6000G2_UCODE_API_MIN
,
583 .ops
= &iwl6000g2b_ops
,
584 .eeprom_size
= OTP_LOW_IMAGE_SIZE
,
585 .eeprom_ver
= EEPROM_6000G2_EEPROM_VERSION
,
586 .eeprom_calib_ver
= EEPROM_6000G2_TX_POWER_VERSION
,
587 .num_of_queues
= IWLAGN_NUM_QUEUES
,
588 .num_of_ampdu_queues
= IWLAGN_NUM_AMPDU_QUEUES
,
589 .mod_params
= &iwlagn_mod_params
,
590 .valid_tx_ant
= ANT_AB
,
591 .valid_rx_ant
= ANT_AB
,
595 .pa_type
= IWL_PA_SYSTEM
,
596 .max_ll_items
= OTP_MAX_LL_ITEMS_6x00
,
597 .shadow_ram_support
= true,
598 .led_compensation
= 51,
599 .chain_noise_num_beacons
= IWL_CAL_NUM_BEACONS
,
600 .supports_idle
= true,
601 .adv_thermal_throttle
= true,
602 .support_ct_kill_exit
= true,
603 .plcp_delta_threshold
= IWL_MAX_PLCP_ERR_THRESHOLD_DEF
,
604 .chain_noise_scale
= 1000,
605 .monitor_recover_period
= IWL_MONITORING_PERIOD
,
606 .max_event_log_size
= 512,
607 .sensitivity_calib_by_driver
= true,
608 .chain_noise_calib_by_driver
= true,
609 .need_dc_calib
= true,
612 struct iwl_cfg iwl6000g2b_bgn_cfg
= {
613 .name
= "6000 Series 1x2 BGN Gen2b",
614 .fw_name_pre
= IWL6000G2B_FW_PRE
,
615 .ucode_api_max
= IWL6000G2_UCODE_API_MAX
,
616 .ucode_api_min
= IWL6000G2_UCODE_API_MIN
,
617 .sku
= IWL_SKU_G
|IWL_SKU_N
,
618 .ops
= &iwl6000g2b_ops
,
619 .eeprom_size
= OTP_LOW_IMAGE_SIZE
,
620 .eeprom_ver
= EEPROM_6000G2_EEPROM_VERSION
,
621 .eeprom_calib_ver
= EEPROM_6000G2_TX_POWER_VERSION
,
622 .num_of_queues
= IWLAGN_NUM_QUEUES
,
623 .num_of_ampdu_queues
= IWLAGN_NUM_AMPDU_QUEUES
,
624 .mod_params
= &iwlagn_mod_params
,
625 .valid_tx_ant
= ANT_A
,
626 .valid_rx_ant
= ANT_AB
,
630 .pa_type
= IWL_PA_SYSTEM
,
631 .max_ll_items
= OTP_MAX_LL_ITEMS_6x00
,
632 .shadow_ram_support
= true,
633 .ht_greenfield_support
= true,
634 .led_compensation
= 51,
635 .use_rts_for_ht
= true, /* use rts/cts protection */
636 .chain_noise_num_beacons
= IWL_CAL_NUM_BEACONS
,
637 .supports_idle
= true,
638 .adv_thermal_throttle
= true,
639 .support_ct_kill_exit
= true,
640 .plcp_delta_threshold
= IWL_MAX_PLCP_ERR_THRESHOLD_DEF
,
641 .chain_noise_scale
= 1000,
642 .monitor_recover_period
= IWL_MONITORING_PERIOD
,
643 .max_event_log_size
= 512,
644 .sensitivity_calib_by_driver
= true,
645 .chain_noise_calib_by_driver
= true,
646 .need_dc_calib
= true,
649 struct iwl_cfg iwl6000g2b_bg_cfg
= {
650 .name
= "6000 Series 1x2 BG Gen2b",
651 .fw_name_pre
= IWL6000G2B_FW_PRE
,
652 .ucode_api_max
= IWL6000G2_UCODE_API_MAX
,
653 .ucode_api_min
= IWL6000G2_UCODE_API_MIN
,
655 .ops
= &iwl6000g2b_ops
,
656 .eeprom_size
= OTP_LOW_IMAGE_SIZE
,
657 .eeprom_ver
= EEPROM_6000G2_EEPROM_VERSION
,
658 .eeprom_calib_ver
= EEPROM_6000G2_TX_POWER_VERSION
,
659 .num_of_queues
= IWLAGN_NUM_QUEUES
,
660 .num_of_ampdu_queues
= IWLAGN_NUM_AMPDU_QUEUES
,
661 .mod_params
= &iwlagn_mod_params
,
662 .valid_tx_ant
= ANT_A
,
663 .valid_rx_ant
= ANT_AB
,
667 .pa_type
= IWL_PA_SYSTEM
,
668 .max_ll_items
= OTP_MAX_LL_ITEMS_6x00
,
669 .shadow_ram_support
= true,
670 .led_compensation
= 51,
671 .chain_noise_num_beacons
= IWL_CAL_NUM_BEACONS
,
672 .supports_idle
= true,
673 .adv_thermal_throttle
= true,
674 .support_ct_kill_exit
= true,
675 .plcp_delta_threshold
= IWL_MAX_PLCP_ERR_THRESHOLD_DEF
,
676 .chain_noise_scale
= 1000,
677 .monitor_recover_period
= IWL_MONITORING_PERIOD
,
678 .max_event_log_size
= 512,
679 .sensitivity_calib_by_driver
= true,
680 .chain_noise_calib_by_driver
= true,
681 .need_dc_calib
= true,
685 * "i": Internal configuration, use internal Power Amplifier
687 struct iwl_cfg iwl6000i_2agn_cfg
= {
688 .name
= "Intel(R) Centrino(R) Advanced-N 6200 AGN",
689 .fw_name_pre
= IWL6000_FW_PRE
,
690 .ucode_api_max
= IWL6000_UCODE_API_MAX
,
691 .ucode_api_min
= IWL6000_UCODE_API_MIN
,
692 .sku
= IWL_SKU_A
|IWL_SKU_G
|IWL_SKU_N
,
694 .eeprom_size
= OTP_LOW_IMAGE_SIZE
,
695 .eeprom_ver
= EEPROM_6000_EEPROM_VERSION
,
696 .eeprom_calib_ver
= EEPROM_6000_TX_POWER_VERSION
,
697 .num_of_queues
= IWLAGN_NUM_QUEUES
,
698 .num_of_ampdu_queues
= IWLAGN_NUM_AMPDU_QUEUES
,
699 .mod_params
= &iwlagn_mod_params
,
700 .valid_tx_ant
= ANT_BC
,
701 .valid_rx_ant
= ANT_BC
,
705 .pa_type
= IWL_PA_INTERNAL
,
706 .max_ll_items
= OTP_MAX_LL_ITEMS_6x00
,
707 .shadow_ram_support
= true,
708 .ht_greenfield_support
= true,
709 .led_compensation
= 51,
710 .use_rts_for_ht
= true, /* use rts/cts protection */
711 .chain_noise_num_beacons
= IWL_CAL_NUM_BEACONS
,
712 .supports_idle
= true,
713 .adv_thermal_throttle
= true,
714 .support_ct_kill_exit
= true,
715 .plcp_delta_threshold
= IWL_MAX_PLCP_ERR_THRESHOLD_DEF
,
716 .chain_noise_scale
= 1000,
717 .monitor_recover_period
= IWL_MONITORING_PERIOD
,
718 .max_event_log_size
= 1024,
719 .ucode_tracing
= true,
720 .sensitivity_calib_by_driver
= true,
721 .chain_noise_calib_by_driver
= true,
724 struct iwl_cfg iwl6000i_2abg_cfg
= {
725 .name
= "Intel(R) Centrino(R) Advanced-N 6200 ABG",
726 .fw_name_pre
= IWL6000_FW_PRE
,
727 .ucode_api_max
= IWL6000_UCODE_API_MAX
,
728 .ucode_api_min
= IWL6000_UCODE_API_MIN
,
729 .sku
= IWL_SKU_A
|IWL_SKU_G
,
731 .eeprom_size
= OTP_LOW_IMAGE_SIZE
,
732 .eeprom_ver
= EEPROM_6000_EEPROM_VERSION
,
733 .eeprom_calib_ver
= EEPROM_6000_TX_POWER_VERSION
,
734 .num_of_queues
= IWLAGN_NUM_QUEUES
,
735 .num_of_ampdu_queues
= IWLAGN_NUM_AMPDU_QUEUES
,
736 .mod_params
= &iwlagn_mod_params
,
737 .valid_tx_ant
= ANT_BC
,
738 .valid_rx_ant
= ANT_BC
,
742 .pa_type
= IWL_PA_INTERNAL
,
743 .max_ll_items
= OTP_MAX_LL_ITEMS_6x00
,
744 .shadow_ram_support
= true,
745 .led_compensation
= 51,
746 .chain_noise_num_beacons
= IWL_CAL_NUM_BEACONS
,
747 .supports_idle
= true,
748 .adv_thermal_throttle
= true,
749 .support_ct_kill_exit
= true,
750 .plcp_delta_threshold
= IWL_MAX_PLCP_ERR_THRESHOLD_DEF
,
751 .chain_noise_scale
= 1000,
752 .monitor_recover_period
= IWL_MONITORING_PERIOD
,
753 .max_event_log_size
= 1024,
754 .ucode_tracing
= true,
755 .sensitivity_calib_by_driver
= true,
756 .chain_noise_calib_by_driver
= true,
759 struct iwl_cfg iwl6000i_2bg_cfg
= {
760 .name
= "Intel(R) Centrino(R) Advanced-N 6200 BG",
761 .fw_name_pre
= IWL6000_FW_PRE
,
762 .ucode_api_max
= IWL6000_UCODE_API_MAX
,
763 .ucode_api_min
= IWL6000_UCODE_API_MIN
,
766 .eeprom_size
= OTP_LOW_IMAGE_SIZE
,
767 .eeprom_ver
= EEPROM_6000_EEPROM_VERSION
,
768 .eeprom_calib_ver
= EEPROM_6000_TX_POWER_VERSION
,
769 .num_of_queues
= IWLAGN_NUM_QUEUES
,
770 .num_of_ampdu_queues
= IWLAGN_NUM_AMPDU_QUEUES
,
771 .mod_params
= &iwlagn_mod_params
,
772 .valid_tx_ant
= ANT_BC
,
773 .valid_rx_ant
= ANT_BC
,
777 .pa_type
= IWL_PA_INTERNAL
,
778 .max_ll_items
= OTP_MAX_LL_ITEMS_6x00
,
779 .shadow_ram_support
= true,
780 .led_compensation
= 51,
781 .chain_noise_num_beacons
= IWL_CAL_NUM_BEACONS
,
782 .supports_idle
= true,
783 .adv_thermal_throttle
= true,
784 .support_ct_kill_exit
= true,
785 .plcp_delta_threshold
= IWL_MAX_PLCP_ERR_THRESHOLD_DEF
,
786 .chain_noise_scale
= 1000,
787 .monitor_recover_period
= IWL_MONITORING_PERIOD
,
788 .max_event_log_size
= 1024,
789 .ucode_tracing
= true,
790 .sensitivity_calib_by_driver
= true,
791 .chain_noise_calib_by_driver
= true,
794 struct iwl_cfg iwl6050_2agn_cfg
= {
795 .name
= "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN",
796 .fw_name_pre
= IWL6050_FW_PRE
,
797 .ucode_api_max
= IWL6050_UCODE_API_MAX
,
798 .ucode_api_min
= IWL6050_UCODE_API_MIN
,
799 .sku
= IWL_SKU_A
|IWL_SKU_G
|IWL_SKU_N
,
801 .eeprom_size
= OTP_LOW_IMAGE_SIZE
,
802 .eeprom_ver
= EEPROM_6050_EEPROM_VERSION
,
803 .eeprom_calib_ver
= EEPROM_6050_TX_POWER_VERSION
,
804 .num_of_queues
= IWLAGN_NUM_QUEUES
,
805 .num_of_ampdu_queues
= IWLAGN_NUM_AMPDU_QUEUES
,
806 .mod_params
= &iwlagn_mod_params
,
807 .valid_tx_ant
= ANT_AB
,
808 .valid_rx_ant
= ANT_AB
,
812 .pa_type
= IWL_PA_SYSTEM
,
813 .max_ll_items
= OTP_MAX_LL_ITEMS_6x50
,
814 .shadow_ram_support
= true,
815 .ht_greenfield_support
= true,
816 .led_compensation
= 51,
817 .use_rts_for_ht
= true, /* use rts/cts protection */
818 .chain_noise_num_beacons
= IWL_CAL_NUM_BEACONS
,
819 .supports_idle
= true,
820 .adv_thermal_throttle
= true,
821 .support_ct_kill_exit
= true,
822 .plcp_delta_threshold
= IWL_MAX_PLCP_ERR_THRESHOLD_DEF
,
823 .chain_noise_scale
= 1500,
824 .monitor_recover_period
= IWL_MONITORING_PERIOD
,
825 .max_event_log_size
= 1024,
826 .ucode_tracing
= true,
827 .sensitivity_calib_by_driver
= true,
828 .chain_noise_calib_by_driver
= true,
829 .need_dc_calib
= true,
832 struct iwl_cfg iwl6050_2abg_cfg
= {
833 .name
= "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG",
834 .fw_name_pre
= IWL6050_FW_PRE
,
835 .ucode_api_max
= IWL6050_UCODE_API_MAX
,
836 .ucode_api_min
= IWL6050_UCODE_API_MIN
,
837 .sku
= IWL_SKU_A
|IWL_SKU_G
,
839 .eeprom_size
= OTP_LOW_IMAGE_SIZE
,
840 .eeprom_ver
= EEPROM_6050_EEPROM_VERSION
,
841 .eeprom_calib_ver
= EEPROM_6050_TX_POWER_VERSION
,
842 .num_of_queues
= IWLAGN_NUM_QUEUES
,
843 .num_of_ampdu_queues
= IWLAGN_NUM_AMPDU_QUEUES
,
844 .mod_params
= &iwlagn_mod_params
,
845 .valid_tx_ant
= ANT_AB
,
846 .valid_rx_ant
= ANT_AB
,
850 .pa_type
= IWL_PA_SYSTEM
,
851 .max_ll_items
= OTP_MAX_LL_ITEMS_6x50
,
852 .shadow_ram_support
= true,
853 .led_compensation
= 51,
854 .chain_noise_num_beacons
= IWL_CAL_NUM_BEACONS
,
855 .supports_idle
= true,
856 .adv_thermal_throttle
= true,
857 .support_ct_kill_exit
= true,
858 .plcp_delta_threshold
= IWL_MAX_PLCP_ERR_THRESHOLD_DEF
,
859 .chain_noise_scale
= 1500,
860 .monitor_recover_period
= IWL_MONITORING_PERIOD
,
861 .max_event_log_size
= 1024,
862 .ucode_tracing
= true,
863 .sensitivity_calib_by_driver
= true,
864 .chain_noise_calib_by_driver
= true,
865 .need_dc_calib
= true,
868 struct iwl_cfg iwl6000_3agn_cfg
= {
869 .name
= "Intel(R) Centrino(R) Ultimate-N 6300 AGN",
870 .fw_name_pre
= IWL6000_FW_PRE
,
871 .ucode_api_max
= IWL6000_UCODE_API_MAX
,
872 .ucode_api_min
= IWL6000_UCODE_API_MIN
,
873 .sku
= IWL_SKU_A
|IWL_SKU_G
|IWL_SKU_N
,
875 .eeprom_size
= OTP_LOW_IMAGE_SIZE
,
876 .eeprom_ver
= EEPROM_6000_EEPROM_VERSION
,
877 .eeprom_calib_ver
= EEPROM_6000_TX_POWER_VERSION
,
878 .num_of_queues
= IWLAGN_NUM_QUEUES
,
879 .num_of_ampdu_queues
= IWLAGN_NUM_AMPDU_QUEUES
,
880 .mod_params
= &iwlagn_mod_params
,
881 .valid_tx_ant
= ANT_ABC
,
882 .valid_rx_ant
= ANT_ABC
,
886 .pa_type
= IWL_PA_SYSTEM
,
887 .max_ll_items
= OTP_MAX_LL_ITEMS_6x00
,
888 .shadow_ram_support
= true,
889 .ht_greenfield_support
= true,
890 .led_compensation
= 51,
891 .use_rts_for_ht
= true, /* use rts/cts protection */
892 .chain_noise_num_beacons
= IWL_CAL_NUM_BEACONS
,
893 .supports_idle
= true,
894 .adv_thermal_throttle
= true,
895 .support_ct_kill_exit
= true,
896 .plcp_delta_threshold
= IWL_MAX_PLCP_ERR_THRESHOLD_DEF
,
897 .chain_noise_scale
= 1000,
898 .monitor_recover_period
= IWL_MONITORING_PERIOD
,
899 .max_event_log_size
= 1024,
900 .ucode_tracing
= true,
901 .sensitivity_calib_by_driver
= true,
902 .chain_noise_calib_by_driver
= true,
905 MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX
));
906 MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX
));
907 MODULE_FIRMWARE(IWL6000G2A_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX
));
908 MODULE_FIRMWARE(IWL6000G2B_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX
));