drivers/net/wireless/iwlwifi/iwl-6000.c

   1 /******************************************************************************
   2  *
   3  * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
   4  *
   5  * This program is free software; you can redistribute it and/or modify it
   6  * under the terms of version 2 of the GNU General Public License as
   7  * published by the Free Software Foundation.
   8  *
   9  * This program is distributed in the hope that it will be useful, but WITHOUT
  10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  12  * more details.
  13  *
  14  * You should have received a copy of the GNU General Public License along with
  15  * this program; if not, write to the Free Software Foundation, Inc.,
  16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  17  *
  18  * The full GNU General Public License is included in this distribution in the
  19  * file called LICENSE.
  20  *
  21  * Contact Information:
  22  *  Intel Linux Wireless <ilw@linux.intel.com>
  23  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  24  *
  25  *****************************************************************************/
  26
  27 #include <linux/kernel.h>
  28 #include <linux/module.h>
  29 #include <linux/init.h>
  30 #include <linux/pci.h>
  31 #include <linux/dma-mapping.h>
  32 #include <linux/delay.h>
  33 #include <linux/skbuff.h>
  34 #include <linux/netdevice.h>
  35 #include <linux/wireless.h>
  36 #include <net/mac80211.h>
  37 #include <linux/etherdevice.h>
  38 #include <asm/unaligned.h>
  39
  40 #include "iwl-eeprom.h"
  41 #include "iwl-dev.h"
  42 #include "iwl-core.h"
  43 #include "iwl-io.h"
  44 #include "iwl-sta.h"
  45 #include "iwl-agn.h"
  46 #include "iwl-helpers.h"
  47 #include "iwl-agn-hw.h"
  48 #include "iwl-6000-hw.h"
  49 #include "iwl-agn-led.h"
  50 #include "iwl-agn-debugfs.h"
  51
  52 /* Highest firmware API version supported */
  53 #define IWL6000_UCODE_API_MAX 4
  54 #define IWL6050_UCODE_API_MAX 4
  55 #define IWL6000G2_UCODE_API_MAX 5
  56
  57 /* Lowest firmware API version supported */
  58 #define IWL6000_UCODE_API_MIN 4
  59 #define IWL6050_UCODE_API_MIN 4
  60 #define IWL6000G2_UCODE_API_MIN 4
  61
  62 #define IWL6000_FW_PRE "iwlwifi-6000-"
  63 #define _IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE #api ".ucode"
  64 #define IWL6000_MODULE_FIRMWARE(api) _IWL6000_MODULE_FIRMWARE(api)
  65
  66 #define IWL6050_FW_PRE "iwlwifi-6050-"
  67 #define _IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE #api ".ucode"
  68 #define IWL6050_MODULE_FIRMWARE(api) _IWL6050_MODULE_FIRMWARE(api)
  69
  70 #define IWL6000G2A_FW_PRE "iwlwifi-6000g2a-"
  71 #define _IWL6000G2A_MODULE_FIRMWARE(api) IWL6000G2A_FW_PRE #api ".ucode"
  72 #define IWL6000G2A_MODULE_FIRMWARE(api) _IWL6000G2A_MODULE_FIRMWARE(api)
  73
  74 #define IWL6000G2B_FW_PRE "iwlwifi-6000g2b-"
  75 #define _IWL6000G2B_MODULE_FIRMWARE(api) IWL6000G2B_FW_PRE #api ".ucode"
  76 #define IWL6000G2B_MODULE_FIRMWARE(api) _IWL6000G2B_MODULE_FIRMWARE(api)
  77
  78
  79 static void iwl6000_set_ct_threshold(struct iwl_priv *priv)
  80 {
  81         /* want Celsius */
  82         priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
  83         priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
  84 }
  85
  86 static void iwl6050_additional_nic_config(struct iwl_priv *priv)
  87 {
  88         /* Indicate calibration version to uCode. */
  89         if (priv->cfg->ops->lib->eeprom_ops.calib_version(priv) >= 6)
  90                 iwl_set_bit(priv, CSR_GP_DRIVER_REG,
  91                                 CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
  92 }
  93
  94 /* NIC configuration for 6000 series */
  95 static void iwl6000_nic_config(struct iwl_priv *priv)
  96 {
  97         u16 radio_cfg;
  98
  99         radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
 100
 101         /* write radio config values to register */
 102         if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) <= EEPROM_RF_CONFIG_TYPE_MAX)
 103                 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
 104                             EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
 105                             EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
 106                             EEPROM_RF_CFG_DASH_MSK(radio_cfg));
 107
 108         /* set CSR_HW_CONFIG_REG for uCode use */
 109         iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
 110                     CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
 111                     CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
 112
 113         /* no locking required for register write */
 114         if (priv->cfg->pa_type == IWL_PA_INTERNAL) {
 115                 /* 2x2 IPA phy type */
 116                 iwl_write32(priv, CSR_GP_DRIVER_REG,
 117                              CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA);
 118         }
 119         /* do additional nic configuration if needed */
 120         if (priv->cfg->ops->nic &&
 121                 priv->cfg->ops->nic->additional_nic_config) {
 122                         priv->cfg->ops->nic->additional_nic_config(priv);
 123         }
 124 }
 125
 126 static struct iwl_sensitivity_ranges iwl6000_sensitivity = {
 127         .min_nrg_cck = 97,
 128         .max_nrg_cck = 0, /* not used, set to 0 */
 129         .auto_corr_min_ofdm = 80,
 130         .auto_corr_min_ofdm_mrc = 128,
 131         .auto_corr_min_ofdm_x1 = 105,
 132         .auto_corr_min_ofdm_mrc_x1 = 192,
 133
 134         .auto_corr_max_ofdm = 145,
 135         .auto_corr_max_ofdm_mrc = 232,
 136         .auto_corr_max_ofdm_x1 = 110,
 137         .auto_corr_max_ofdm_mrc_x1 = 232,
 138
 139         .auto_corr_min_cck = 125,
 140         .auto_corr_max_cck = 175,
 141         .auto_corr_min_cck_mrc = 160,
 142         .auto_corr_max_cck_mrc = 310,
 143         .nrg_th_cck = 97,
 144         .nrg_th_ofdm = 100,
 145
 146         .barker_corr_th_min = 190,
 147         .barker_corr_th_min_mrc = 390,
 148         .nrg_th_cca = 62,
 149 };
 150
 151 static int iwl6000_hw_set_hw_params(struct iwl_priv *priv)
 152 {
 153         if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
 154             priv->cfg->mod_params->num_of_queues <= IWLAGN_NUM_QUEUES)
 155                 priv->cfg->num_of_queues =
 156                         priv->cfg->mod_params->num_of_queues;
 157
 158         priv->hw_params.max_txq_num = priv->cfg->num_of_queues;
 159         priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
 160         priv->hw_params.scd_bc_tbls_size =
 161                         priv->cfg->num_of_queues *
 162                         sizeof(struct iwlagn_scd_bc_tbl);
 163         priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
 164         priv->hw_params.max_stations = IWLAGN_STATION_COUNT;
 165         priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWLAGN_BROADCAST_ID;
 166
 167         priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE;
 168         priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE;
 169
 170         priv->hw_params.max_bsm_size = 0;
 171         priv->hw_params.ht40_channel =  BIT(IEEE80211_BAND_2GHZ) |
 172                                         BIT(IEEE80211_BAND_5GHZ);
 173         priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
 174
 175         priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
 176         priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
 177         priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
 178         priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
 179
 180         if (priv->cfg->ops->lib->temp_ops.set_ct_kill)
 181                 priv->cfg->ops->lib->temp_ops.set_ct_kill(priv);
 182
 183         /* Set initial sensitivity parameters */
 184         /* Set initial calibration set */
 185         priv->hw_params.sens = &iwl6000_sensitivity;
 186         priv->hw_params.calib_init_cfg =
 187                 BIT(IWL_CALIB_XTAL)             |
 188                 BIT(IWL_CALIB_LO)               |
 189                 BIT(IWL_CALIB_TX_IQ)            |
 190                 BIT(IWL_CALIB_BASE_BAND);
 191         if (priv->cfg->need_dc_calib)
 192                 priv->hw_params.calib_init_cfg |= BIT(IWL_CALIB_DC);
 193
 194         priv->hw_params.beacon_time_tsf_bits = IWLAGN_EXT_BEACON_TIME_POS;
 195
 196         return 0;
 197 }
 198
 199 static int iwl6000_hw_channel_switch(struct iwl_priv *priv,
 200                                      struct ieee80211_channel_switch *ch_switch)
 201 {
 202         /*
 203          * MULTI-FIXME
 204          * See iwl_mac_channel_switch.
 205          */
 206         struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
 207         struct iwl6000_channel_switch_cmd cmd;
 208         const struct iwl_channel_info *ch_info;
 209         u32 switch_time_in_usec, ucode_switch_time;
 210         u16 ch;
 211         u32 tsf_low;
 212         u8 switch_count;
 213         u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
 214         struct ieee80211_vif *vif = ctx->vif;
 215         struct iwl_host_cmd hcmd = {
 216                 .id = REPLY_CHANNEL_SWITCH,
 217                 .len = sizeof(cmd),
 218                 .flags = CMD_SYNC,
 219                 .data = &cmd,
 220         };
 221
 222         cmd.band = priv->band == IEEE80211_BAND_2GHZ;
 223         ch = ch_switch->channel->hw_value;
 224         IWL_DEBUG_11H(priv, "channel switch from %u to %u\n",
 225                       ctx->active.channel, ch);
 226         cmd.channel = cpu_to_le16(ch);
 227         cmd.rxon_flags = ctx->staging.flags;
 228         cmd.rxon_filter_flags = ctx->staging.filter_flags;
 229         switch_count = ch_switch->count;
 230         tsf_low = ch_switch->timestamp & 0x0ffffffff;
 231         /*
 232          * calculate the ucode channel switch time
 233          * adding TSF as one of the factor for when to switch
 234          */
 235         if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
 236                 if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
 237                     beacon_interval)) {
 238                         switch_count -= (priv->ucode_beacon_time -
 239                                 tsf_low) / beacon_interval;
 240                 } else
 241                         switch_count = 0;
 242         }
 243         if (switch_count <= 1)
 244                 cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
 245         else {
 246                 switch_time_in_usec =
 247                         vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
 248                 ucode_switch_time = iwl_usecs_to_beacons(priv,
 249                                                          switch_time_in_usec,
 250                                                          beacon_interval);
 251                 cmd.switch_time = iwl_add_beacon_time(priv,
 252                                                       priv->ucode_beacon_time,
 253                                                       ucode_switch_time,
 254                                                       beacon_interval);
 255         }
 256         IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
 257                       cmd.switch_time);
 258         ch_info = iwl_get_channel_info(priv, priv->band, ch);
 259         if (ch_info)
 260                 cmd.expect_beacon = is_channel_radar(ch_info);
 261         else {
 262                 IWL_ERR(priv, "invalid channel switch from %u to %u\n",
 263                         ctx->active.channel, ch);
 264                 return -EFAULT;
 265         }
 266         priv->switch_rxon.channel = cmd.channel;
 267         priv->switch_rxon.switch_in_progress = true;
 268
 269         return iwl_send_cmd_sync(priv, &hcmd);
 270 }
 271
 272 static struct iwl_lib_ops iwl6000_lib = {
 273         .set_hw_params = iwl6000_hw_set_hw_params,
 274         .txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
 275         .txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
 276         .txq_set_sched = iwlagn_txq_set_sched,
 277         .txq_agg_enable = iwlagn_txq_agg_enable,
 278         .txq_agg_disable = iwlagn_txq_agg_disable,
 279         .txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
 280         .txq_free_tfd = iwl_hw_txq_free_tfd,
 281         .txq_init = iwl_hw_tx_queue_init,
 282         .rx_handler_setup = iwlagn_rx_handler_setup,
 283         .setup_deferred_work = iwlagn_setup_deferred_work,
 284         .is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
 285         .load_ucode = iwlagn_load_ucode,
 286         .dump_nic_event_log = iwl_dump_nic_event_log,
 287         .dump_nic_error_log = iwl_dump_nic_error_log,
 288         .dump_csr = iwl_dump_csr,
 289         .dump_fh = iwl_dump_fh,
 290         .init_alive_start = iwlagn_init_alive_start,
 291         .alive_notify = iwlagn_alive_notify,
 292         .send_tx_power = iwlagn_send_tx_power,
 293         .update_chain_flags = iwl_update_chain_flags,
 294         .set_channel_switch = iwl6000_hw_channel_switch,
 295         .apm_ops = {
 296                 .init = iwl_apm_init,
 297                 .stop = iwl_apm_stop,
 298                 .config = iwl6000_nic_config,
 299                 .set_pwr_src = iwl_set_pwr_src,
 300         },
 301         .eeprom_ops = {
 302                 .regulatory_bands = {
 303                         EEPROM_REG_BAND_1_CHANNELS,
 304                         EEPROM_REG_BAND_2_CHANNELS,
 305                         EEPROM_REG_BAND_3_CHANNELS,
 306                         EEPROM_REG_BAND_4_CHANNELS,
 307                         EEPROM_REG_BAND_5_CHANNELS,
 308                         EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
 309                         EEPROM_REG_BAND_52_HT40_CHANNELS
 310                 },
 311                 .verify_signature  = iwlcore_eeprom_verify_signature,
 312                 .acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
 313                 .release_semaphore = iwlcore_eeprom_release_semaphore,
 314                 .calib_version  = iwlagn_eeprom_calib_version,
 315                 .query_addr = iwlagn_eeprom_query_addr,
 316                 .update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower,
 317         },
 318         .post_associate = iwl_post_associate,
 319         .isr = iwl_isr_ict,
 320         .config_ap = iwl_config_ap,
 321         .temp_ops = {
 322                 .temperature = iwlagn_temperature,
 323                 .set_ct_kill = iwl6000_set_ct_threshold,
 324          },
 325         .manage_ibss_station = iwlagn_manage_ibss_station,
 326         .update_bcast_stations = iwl_update_bcast_stations,
 327         .debugfs_ops = {
 328                 .rx_stats_read = iwl_ucode_rx_stats_read,
 329                 .tx_stats_read = iwl_ucode_tx_stats_read,
 330                 .general_stats_read = iwl_ucode_general_stats_read,
 331                 .bt_stats_read = iwl_ucode_bt_stats_read,
 332                 .reply_tx_error = iwl_reply_tx_error_read,
 333         },
 334         .recover_from_tx_stall = iwl_bg_monitor_recover,
 335         .check_plcp_health = iwl_good_plcp_health,
 336         .check_ack_health = iwl_good_ack_health,
 337         .txfifo_flush = iwlagn_txfifo_flush,
 338         .dev_txfifo_flush = iwlagn_dev_txfifo_flush,
 339         .tt_ops = {
 340                 .lower_power_detection = iwl_tt_is_low_power_state,
 341                 .tt_power_mode = iwl_tt_current_power_mode,
 342                 .ct_kill_check = iwl_check_for_ct_kill,
 343         }
 344 };
 345
 346 static struct iwl_lib_ops iwl6000g2b_lib = {
 347         .set_hw_params = iwl6000_hw_set_hw_params,
 348         .txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
 349         .txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
 350         .txq_set_sched = iwlagn_txq_set_sched,
 351         .txq_agg_enable = iwlagn_txq_agg_enable,
 352         .txq_agg_disable = iwlagn_txq_agg_disable,
 353         .txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
 354         .txq_free_tfd = iwl_hw_txq_free_tfd,
 355         .txq_init = iwl_hw_tx_queue_init,
 356         .rx_handler_setup = iwlagn_bt_rx_handler_setup,
 357         .setup_deferred_work = iwlagn_bt_setup_deferred_work,
 358         .cancel_deferred_work = iwlagn_bt_cancel_deferred_work,
 359         .is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
 360         .load_ucode = iwlagn_load_ucode,
 361         .dump_nic_event_log = iwl_dump_nic_event_log,
 362         .dump_nic_error_log = iwl_dump_nic_error_log,
 363         .dump_csr = iwl_dump_csr,
 364         .dump_fh = iwl_dump_fh,
 365         .init_alive_start = iwlagn_init_alive_start,
 366         .alive_notify = iwlagn_alive_notify,
 367         .send_tx_power = iwlagn_send_tx_power,
 368         .update_chain_flags = iwl_update_chain_flags,
 369         .set_channel_switch = iwl6000_hw_channel_switch,
 370         .apm_ops = {
 371                 .init = iwl_apm_init,
 372                 .stop = iwl_apm_stop,
 373                 .config = iwl6000_nic_config,
 374                 .set_pwr_src = iwl_set_pwr_src,
 375         },
 376         .eeprom_ops = {
 377                 .regulatory_bands = {
 378                         EEPROM_REG_BAND_1_CHANNELS,
 379                         EEPROM_REG_BAND_2_CHANNELS,
 380                         EEPROM_REG_BAND_3_CHANNELS,
 381                         EEPROM_REG_BAND_4_CHANNELS,
 382                         EEPROM_REG_BAND_5_CHANNELS,
 383                         EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
 384                         EEPROM_REG_BAND_52_HT40_CHANNELS
 385                 },
 386                 .verify_signature  = iwlcore_eeprom_verify_signature,
 387                 .acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
 388                 .release_semaphore = iwlcore_eeprom_release_semaphore,
 389                 .calib_version  = iwlagn_eeprom_calib_version,
 390                 .query_addr = iwlagn_eeprom_query_addr,
 391                 .update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower,
 392         },
 393         .post_associate = iwl_post_associate,
 394         .isr = iwl_isr_ict,
 395         .config_ap = iwl_config_ap,
 396         .temp_ops = {
 397                 .temperature = iwlagn_temperature,
 398                 .set_ct_kill = iwl6000_set_ct_threshold,
 399          },
 400         .manage_ibss_station = iwlagn_manage_ibss_station,
 401         .update_bcast_stations = iwl_update_bcast_stations,
 402         .debugfs_ops = {
 403                 .rx_stats_read = iwl_ucode_rx_stats_read,
 404                 .tx_stats_read = iwl_ucode_tx_stats_read,
 405                 .general_stats_read = iwl_ucode_general_stats_read,
 406                 .bt_stats_read = iwl_ucode_bt_stats_read,
 407                 .reply_tx_error = iwl_reply_tx_error_read,
 408         },
 409         .recover_from_tx_stall = iwl_bg_monitor_recover,
 410         .check_plcp_health = iwl_good_plcp_health,
 411         .check_ack_health = iwl_good_ack_health,
 412         .txfifo_flush = iwlagn_txfifo_flush,
 413         .dev_txfifo_flush = iwlagn_dev_txfifo_flush,
 414         .tt_ops = {
 415                 .lower_power_detection = iwl_tt_is_low_power_state,
 416                 .tt_power_mode = iwl_tt_current_power_mode,
 417                 .ct_kill_check = iwl_check_for_ct_kill,
 418         }
 419 };
 420
 421 static struct iwl_nic_ops iwl6050_nic_ops = {
 422         .additional_nic_config = &iwl6050_additional_nic_config,
 423 };
 424
 425 static const struct iwl_ops iwl6000_ops = {
 426         .lib = &iwl6000_lib,
 427         .hcmd = &iwlagn_hcmd,
 428         .utils = &iwlagn_hcmd_utils,
 429         .led = &iwlagn_led_ops,
 430 };
 431
 432 static const struct iwl_ops iwl6050_ops = {
 433         .lib = &iwl6000_lib,
 434         .hcmd = &iwlagn_hcmd,
 435         .utils = &iwlagn_hcmd_utils,
 436         .led = &iwlagn_led_ops,
 437         .nic = &iwl6050_nic_ops,
 438 };
 439
 440 static const struct iwl_ops iwl6000g2b_ops = {
 441         .lib = &iwl6000g2b_lib,
 442         .hcmd = &iwlagn_bt_hcmd,
 443         .utils = &iwlagn_hcmd_utils,
 444         .led = &iwlagn_led_ops,
 445 };
 446
 447 struct iwl_cfg iwl6000g2a_2agn_cfg = {
 448         .name = "6000 Series 2x2 AGN Gen2a",
 449         .fw_name_pre = IWL6000G2A_FW_PRE,
 450         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
 451         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
 452         .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
 453         .ops = &iwl6000_ops,
 454         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 455         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
 456         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
 457         .num_of_queues = IWLAGN_NUM_QUEUES,
 458         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 459         .mod_params = &iwlagn_mod_params,
 460         .valid_tx_ant = ANT_AB,
 461         .valid_rx_ant = ANT_AB,
 462         .pll_cfg_val = 0,
 463         .set_l0s = true,
 464         .use_bsm = false,
 465         .pa_type = IWL_PA_SYSTEM,
 466         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 467         .shadow_ram_support = true,
 468         .ht_greenfield_support = true,
 469         .led_compensation = 51,
 470         .use_rts_for_aggregation = true, /* use rts/cts protection */
 471         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 472         .supports_idle = true,
 473         .adv_thermal_throttle = true,
 474         .support_ct_kill_exit = true,
 475         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 476         .chain_noise_scale = 1000,
 477         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
 478         .max_event_log_size = 512,
 479         .ucode_tracing = true,
 480         .sensitivity_calib_by_driver = true,
 481         .chain_noise_calib_by_driver = true,
 482         .need_dc_calib = true,
 483 };
 484
 485 struct iwl_cfg iwl6000g2a_2abg_cfg = {
 486         .name = "6000 Series 2x2 ABG Gen2a",
 487         .fw_name_pre = IWL6000G2A_FW_PRE,
 488         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
 489         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
 490         .sku = IWL_SKU_A|IWL_SKU_G,
 491         .ops = &iwl6000_ops,
 492         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 493         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
 494         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
 495         .num_of_queues = IWLAGN_NUM_QUEUES,
 496         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 497         .mod_params = &iwlagn_mod_params,
 498         .valid_tx_ant = ANT_AB,
 499         .valid_rx_ant = ANT_AB,
 500         .pll_cfg_val = 0,
 501         .set_l0s = true,
 502         .use_bsm = false,
 503         .pa_type = IWL_PA_SYSTEM,
 504         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 505         .shadow_ram_support = true,
 506         .led_compensation = 51,
 507         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 508         .supports_idle = true,
 509         .adv_thermal_throttle = true,
 510         .support_ct_kill_exit = true,
 511         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 512         .chain_noise_scale = 1000,
 513         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
 514         .max_event_log_size = 512,
 515         .sensitivity_calib_by_driver = true,
 516         .chain_noise_calib_by_driver = true,
 517         .need_dc_calib = true,
 518 };
 519
 520 struct iwl_cfg iwl6000g2a_2bg_cfg = {
 521         .name = "6000 Series 2x2 BG Gen2a",
 522         .fw_name_pre = IWL6000G2A_FW_PRE,
 523         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
 524         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
 525         .sku = IWL_SKU_G,
 526         .ops = &iwl6000_ops,
 527         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 528         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
 529         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
 530         .num_of_queues = IWLAGN_NUM_QUEUES,
 531         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 532         .mod_params = &iwlagn_mod_params,
 533         .valid_tx_ant = ANT_AB,
 534         .valid_rx_ant = ANT_AB,
 535         .pll_cfg_val = 0,
 536         .set_l0s = true,
 537         .use_bsm = false,
 538         .pa_type = IWL_PA_SYSTEM,
 539         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 540         .shadow_ram_support = true,
 541         .led_compensation = 51,
 542         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 543         .supports_idle = true,
 544         .adv_thermal_throttle = true,
 545         .support_ct_kill_exit = true,
 546         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 547         .chain_noise_scale = 1000,
 548         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
 549         .max_event_log_size = 512,
 550         .sensitivity_calib_by_driver = true,
 551         .chain_noise_calib_by_driver = true,
 552         .need_dc_calib = true,
 553 };
 554
 555 struct iwl_cfg iwl6000g2b_2agn_cfg = {
 556         .name = "6000 Series 2x2 AGN Gen2b",
 557         .fw_name_pre = IWL6000G2B_FW_PRE,
 558         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
 559         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
 560         .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
 561         .ops = &iwl6000g2b_ops,
 562         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 563         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
 564         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
 565         .num_of_queues = IWLAGN_NUM_QUEUES,
 566         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 567         .mod_params = &iwlagn_mod_params,
 568         .valid_tx_ant = ANT_AB,
 569         .valid_rx_ant = ANT_AB,
 570         .pll_cfg_val = 0,
 571         .set_l0s = true,
 572         .use_bsm = false,
 573         .pa_type = IWL_PA_SYSTEM,
 574         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 575         .shadow_ram_support = true,
 576         .ht_greenfield_support = true,
 577         .led_compensation = 51,
 578         .use_rts_for_aggregation = true, /* use rts/cts protection */
 579         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 580         .supports_idle = true,
 581         .adv_thermal_throttle = true,
 582         .support_ct_kill_exit = true,
 583         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE,
 584         .chain_noise_scale = 1000,
 585         .monitor_recover_period = IWL_LONG_MONITORING_PERIOD,
 586         .max_event_log_size = 512,
 587         .sensitivity_calib_by_driver = true,
 588         .chain_noise_calib_by_driver = true,
 589         .need_dc_calib = true,
 590         .bt_statistics = true,
 591         /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
 592         .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
 593         .advanced_bt_coexist = true,
 594         .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE,
 595         .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT,
 596 };
 597
 598 struct iwl_cfg iwl6000g2b_2abg_cfg = {
 599         .name = "6000 Series 2x2 ABG Gen2b",
 600         .fw_name_pre = IWL6000G2B_FW_PRE,
 601         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
 602         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
 603         .sku = IWL_SKU_A|IWL_SKU_G,
 604         .ops = &iwl6000g2b_ops,
 605         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 606         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
 607         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
 608         .num_of_queues = IWLAGN_NUM_QUEUES,
 609         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 610         .mod_params = &iwlagn_mod_params,
 611         .valid_tx_ant = ANT_AB,
 612         .valid_rx_ant = ANT_AB,
 613         .pll_cfg_val = 0,
 614         .set_l0s = true,
 615         .use_bsm = false,
 616         .pa_type = IWL_PA_SYSTEM,
 617         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 618         .shadow_ram_support = true,
 619         .led_compensation = 51,
 620         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 621         .supports_idle = true,
 622         .adv_thermal_throttle = true,
 623         .support_ct_kill_exit = true,
 624         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE,
 625         .chain_noise_scale = 1000,
 626         .monitor_recover_period = IWL_LONG_MONITORING_PERIOD,
 627         .max_event_log_size = 512,
 628         .sensitivity_calib_by_driver = true,
 629         .chain_noise_calib_by_driver = true,
 630         .need_dc_calib = true,
 631         .bt_statistics = true,
 632         /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
 633         .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
 634         .advanced_bt_coexist = true,
 635         .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE,
 636         .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT,
 637 };
 638
 639 struct iwl_cfg iwl6000g2b_2bgn_cfg = {
 640         .name = "6000 Series 2x2 BGN Gen2b",
 641         .fw_name_pre = IWL6000G2B_FW_PRE,
 642         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
 643         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
 644         .sku = IWL_SKU_G|IWL_SKU_N,
 645         .ops = &iwl6000g2b_ops,
 646         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 647         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
 648         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
 649         .num_of_queues = IWLAGN_NUM_QUEUES,
 650         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 651         .mod_params = &iwlagn_mod_params,
 652         .valid_tx_ant = ANT_AB,
 653         .valid_rx_ant = ANT_AB,
 654         .pll_cfg_val = 0,
 655         .set_l0s = true,
 656         .use_bsm = false,
 657         .pa_type = IWL_PA_SYSTEM,
 658         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 659         .shadow_ram_support = true,
 660         .ht_greenfield_support = true,
 661         .led_compensation = 51,
 662         .use_rts_for_aggregation = true, /* use rts/cts protection */
 663         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 664         .supports_idle = true,
 665         .adv_thermal_throttle = true,
 666         .support_ct_kill_exit = true,
 667         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE,
 668         .chain_noise_scale = 1000,
 669         .monitor_recover_period = IWL_LONG_MONITORING_PERIOD,
 670         .max_event_log_size = 512,
 671         .sensitivity_calib_by_driver = true,
 672         .chain_noise_calib_by_driver = true,
 673         .need_dc_calib = true,
 674         .bt_statistics = true,
 675         /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
 676         .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
 677         .advanced_bt_coexist = true,
 678         .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE,
 679         .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT,
 680 };
 681
 682 struct iwl_cfg iwl6000g2b_2bg_cfg = {
 683         .name = "6000 Series 2x2 BG Gen2b",
 684         .fw_name_pre = IWL6000G2B_FW_PRE,
 685         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
 686         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
 687         .sku = IWL_SKU_G,
 688         .ops = &iwl6000g2b_ops,
 689         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 690         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
 691         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
 692         .num_of_queues = IWLAGN_NUM_QUEUES,
 693         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 694         .mod_params = &iwlagn_mod_params,
 695         .valid_tx_ant = ANT_AB,
 696         .valid_rx_ant = ANT_AB,
 697         .pll_cfg_val = 0,
 698         .set_l0s = true,
 699         .use_bsm = false,
 700         .pa_type = IWL_PA_SYSTEM,
 701         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 702         .shadow_ram_support = true,
 703         .led_compensation = 51,
 704         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 705         .supports_idle = true,
 706         .adv_thermal_throttle = true,
 707         .support_ct_kill_exit = true,
 708         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE,
 709         .chain_noise_scale = 1000,
 710         .monitor_recover_period = IWL_LONG_MONITORING_PERIOD,
 711         .max_event_log_size = 512,
 712         .sensitivity_calib_by_driver = true,
 713         .chain_noise_calib_by_driver = true,
 714         .need_dc_calib = true,
 715         .bt_statistics = true,
 716         /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
 717         .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
 718         .advanced_bt_coexist = true,
 719         .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE,
 720         .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT,
 721 };
 722
 723 struct iwl_cfg iwl6000g2b_bgn_cfg = {
 724         .name = "6000 Series 1x2 BGN Gen2b",
 725         .fw_name_pre = IWL6000G2B_FW_PRE,
 726         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
 727         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
 728         .sku = IWL_SKU_G|IWL_SKU_N,
 729         .ops = &iwl6000g2b_ops,
 730         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 731         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
 732         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
 733         .num_of_queues = IWLAGN_NUM_QUEUES,
 734         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 735         .mod_params = &iwlagn_mod_params,
 736         .valid_tx_ant = ANT_A,
 737         .valid_rx_ant = ANT_AB,
 738         .pll_cfg_val = 0,
 739         .set_l0s = true,
 740         .use_bsm = false,
 741         .pa_type = IWL_PA_SYSTEM,
 742         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 743         .shadow_ram_support = true,
 744         .ht_greenfield_support = true,
 745         .led_compensation = 51,
 746         .use_rts_for_aggregation = true, /* use rts/cts protection */
 747         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 748         .supports_idle = true,
 749         .adv_thermal_throttle = true,
 750         .support_ct_kill_exit = true,
 751         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE,
 752         .chain_noise_scale = 1000,
 753         .monitor_recover_period = IWL_LONG_MONITORING_PERIOD,
 754         .max_event_log_size = 512,
 755         .sensitivity_calib_by_driver = true,
 756         .chain_noise_calib_by_driver = true,
 757         .need_dc_calib = true,
 758         .bt_statistics = true,
 759         /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
 760         .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
 761         .advanced_bt_coexist = true,
 762         .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE,
 763         .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT,
 764 };
 765
 766 struct iwl_cfg iwl6000g2b_bg_cfg = {
 767         .name = "6000 Series 1x2 BG Gen2b",
 768         .fw_name_pre = IWL6000G2B_FW_PRE,
 769         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
 770         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
 771         .sku = IWL_SKU_G,
 772         .ops = &iwl6000g2b_ops,
 773         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 774         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
 775         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
 776         .num_of_queues = IWLAGN_NUM_QUEUES,
 777         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 778         .mod_params = &iwlagn_mod_params,
 779         .valid_tx_ant = ANT_A,
 780         .valid_rx_ant = ANT_AB,
 781         .pll_cfg_val = 0,
 782         .set_l0s = true,
 783         .use_bsm = false,
 784         .pa_type = IWL_PA_SYSTEM,
 785         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 786         .shadow_ram_support = true,
 787         .led_compensation = 51,
 788         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 789         .supports_idle = true,
 790         .adv_thermal_throttle = true,
 791         .support_ct_kill_exit = true,
 792         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE,
 793         .chain_noise_scale = 1000,
 794         .monitor_recover_period = IWL_LONG_MONITORING_PERIOD,
 795         .max_event_log_size = 512,
 796         .sensitivity_calib_by_driver = true,
 797         .chain_noise_calib_by_driver = true,
 798         .need_dc_calib = true,
 799         .bt_statistics = true,
 800         /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
 801         .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
 802         .advanced_bt_coexist = true,
 803         .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE,
 804         .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT,
 805 };
 806
 807 /*
 808  * "i": Internal configuration, use internal Power Amplifier
 809  */
 810 struct iwl_cfg iwl6000i_2agn_cfg = {
 811         .name = "Intel(R) Centrino(R) Advanced-N 6200 AGN",
 812         .fw_name_pre = IWL6000_FW_PRE,
 813         .ucode_api_max = IWL6000_UCODE_API_MAX,
 814         .ucode_api_min = IWL6000_UCODE_API_MIN,
 815         .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
 816         .ops = &iwl6000_ops,
 817         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 818         .eeprom_ver = EEPROM_6000_EEPROM_VERSION,
 819         .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
 820         .num_of_queues = IWLAGN_NUM_QUEUES,
 821         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 822         .mod_params = &iwlagn_mod_params,
 823         .valid_tx_ant = ANT_BC,
 824         .valid_rx_ant = ANT_BC,
 825         .pll_cfg_val = 0,
 826         .set_l0s = true,
 827         .use_bsm = false,
 828         .pa_type = IWL_PA_INTERNAL,
 829         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 830         .shadow_ram_support = true,
 831         .ht_greenfield_support = true,
 832         .led_compensation = 51,
 833         .use_rts_for_aggregation = true, /* use rts/cts protection */
 834         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 835         .supports_idle = true,
 836         .adv_thermal_throttle = true,
 837         .support_ct_kill_exit = true,
 838         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 839         .chain_noise_scale = 1000,
 840         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
 841         .max_event_log_size = 1024,
 842         .ucode_tracing = true,
 843         .sensitivity_calib_by_driver = true,
 844         .chain_noise_calib_by_driver = true,
 845 };
 846
 847 struct iwl_cfg iwl6000i_2abg_cfg = {
 848         .name = "Intel(R) Centrino(R) Advanced-N 6200 ABG",
 849         .fw_name_pre = IWL6000_FW_PRE,
 850         .ucode_api_max = IWL6000_UCODE_API_MAX,
 851         .ucode_api_min = IWL6000_UCODE_API_MIN,
 852         .sku = IWL_SKU_A|IWL_SKU_G,
 853         .ops = &iwl6000_ops,
 854         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 855         .eeprom_ver = EEPROM_6000_EEPROM_VERSION,
 856         .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
 857         .num_of_queues = IWLAGN_NUM_QUEUES,
 858         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 859         .mod_params = &iwlagn_mod_params,
 860         .valid_tx_ant = ANT_BC,
 861         .valid_rx_ant = ANT_BC,
 862         .pll_cfg_val = 0,
 863         .set_l0s = true,
 864         .use_bsm = false,
 865         .pa_type = IWL_PA_INTERNAL,
 866         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 867         .shadow_ram_support = true,
 868         .led_compensation = 51,
 869         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 870         .supports_idle = true,
 871         .adv_thermal_throttle = true,
 872         .support_ct_kill_exit = true,
 873         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 874         .chain_noise_scale = 1000,
 875         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
 876         .max_event_log_size = 1024,
 877         .ucode_tracing = true,
 878         .sensitivity_calib_by_driver = true,
 879         .chain_noise_calib_by_driver = true,
 880 };
 881
 882 struct iwl_cfg iwl6000i_2bg_cfg = {
 883         .name = "Intel(R) Centrino(R) Advanced-N 6200 BG",
 884         .fw_name_pre = IWL6000_FW_PRE,
 885         .ucode_api_max = IWL6000_UCODE_API_MAX,
 886         .ucode_api_min = IWL6000_UCODE_API_MIN,
 887         .sku = IWL_SKU_G,
 888         .ops = &iwl6000_ops,
 889         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 890         .eeprom_ver = EEPROM_6000_EEPROM_VERSION,
 891         .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
 892         .num_of_queues = IWLAGN_NUM_QUEUES,
 893         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 894         .mod_params = &iwlagn_mod_params,
 895         .valid_tx_ant = ANT_BC,
 896         .valid_rx_ant = ANT_BC,
 897         .pll_cfg_val = 0,
 898         .set_l0s = true,
 899         .use_bsm = false,
 900         .pa_type = IWL_PA_INTERNAL,
 901         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 902         .shadow_ram_support = true,
 903         .led_compensation = 51,
 904         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 905         .supports_idle = true,
 906         .adv_thermal_throttle = true,
 907         .support_ct_kill_exit = true,
 908         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 909         .chain_noise_scale = 1000,
 910         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
 911         .max_event_log_size = 1024,
 912         .ucode_tracing = true,
 913         .sensitivity_calib_by_driver = true,
 914         .chain_noise_calib_by_driver = true,
 915 };
 916
 917 struct iwl_cfg iwl6050_2agn_cfg = {
 918         .name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN",
 919         .fw_name_pre = IWL6050_FW_PRE,
 920         .ucode_api_max = IWL6050_UCODE_API_MAX,
 921         .ucode_api_min = IWL6050_UCODE_API_MIN,
 922         .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
 923         .ops = &iwl6050_ops,
 924         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 925         .eeprom_ver = EEPROM_6050_EEPROM_VERSION,
 926         .eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,
 927         .num_of_queues = IWLAGN_NUM_QUEUES,
 928         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 929         .mod_params = &iwlagn_mod_params,
 930         .valid_tx_ant = ANT_AB,
 931         .valid_rx_ant = ANT_AB,
 932         .pll_cfg_val = 0,
 933         .set_l0s = true,
 934         .use_bsm = false,
 935         .pa_type = IWL_PA_SYSTEM,
 936         .max_ll_items = OTP_MAX_LL_ITEMS_6x50,
 937         .shadow_ram_support = true,
 938         .ht_greenfield_support = true,
 939         .led_compensation = 51,
 940         .use_rts_for_aggregation = true, /* use rts/cts protection */
 941         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 942         .supports_idle = true,
 943         .adv_thermal_throttle = true,
 944         .support_ct_kill_exit = true,
 945         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 946         .chain_noise_scale = 1500,
 947         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
 948         .max_event_log_size = 1024,
 949         .ucode_tracing = true,
 950         .sensitivity_calib_by_driver = true,
 951         .chain_noise_calib_by_driver = true,
 952         .need_dc_calib = true,
 953 };
 954
 955 struct iwl_cfg iwl6050g2_bgn_cfg = {
 956         .name = "6050 Series 1x2 BGN Gen2",
 957         .fw_name_pre = IWL6050_FW_PRE,
 958         .ucode_api_max = IWL6050_UCODE_API_MAX,
 959         .ucode_api_min = IWL6050_UCODE_API_MIN,
 960         .sku = IWL_SKU_G|IWL_SKU_N,
 961         .ops = &iwl6050_ops,
 962         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 963         .eeprom_ver = EEPROM_6050G2_EEPROM_VERSION,
 964         .eeprom_calib_ver = EEPROM_6050G2_TX_POWER_VERSION,
 965         .num_of_queues = IWLAGN_NUM_QUEUES,
 966         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 967         .mod_params = &iwlagn_mod_params,
 968         .valid_tx_ant = ANT_A,
 969         .valid_rx_ant = ANT_AB,
 970         .pll_cfg_val = 0,
 971         .set_l0s = true,
 972         .use_bsm = false,
 973         .pa_type = IWL_PA_SYSTEM,
 974         .max_ll_items = OTP_MAX_LL_ITEMS_6x50,
 975         .shadow_ram_support = true,
 976         .ht_greenfield_support = true,
 977         .led_compensation = 51,
 978         .use_rts_for_aggregation = true, /* use rts/cts protection */
 979         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 980         .supports_idle = true,
 981         .adv_thermal_throttle = true,
 982         .support_ct_kill_exit = true,
 983         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 984         .chain_noise_scale = 1500,
 985         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
 986         .max_event_log_size = 1024,
 987         .ucode_tracing = true,
 988         .sensitivity_calib_by_driver = true,
 989         .chain_noise_calib_by_driver = true,
 990         .need_dc_calib = true,
 991 };
 992
 993 struct iwl_cfg iwl6050_2abg_cfg = {
 994         .name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG",
 995         .fw_name_pre = IWL6050_FW_PRE,
 996         .ucode_api_max = IWL6050_UCODE_API_MAX,
 997         .ucode_api_min = IWL6050_UCODE_API_MIN,
 998         .sku = IWL_SKU_A|IWL_SKU_G,
 999         .ops = &iwl6050_ops,
1000         .eeprom_size = OTP_LOW_IMAGE_SIZE,
1001         .eeprom_ver = EEPROM_6050_EEPROM_VERSION,
1002         .eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,
1003         .num_of_queues = IWLAGN_NUM_QUEUES,
1004         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
1005         .mod_params = &iwlagn_mod_params,
1006         .valid_tx_ant = ANT_AB,
1007         .valid_rx_ant = ANT_AB,
1008         .pll_cfg_val = 0,
1009         .set_l0s = true,
1010         .use_bsm = false,
1011         .pa_type = IWL_PA_SYSTEM,
1012         .max_ll_items = OTP_MAX_LL_ITEMS_6x50,
1013         .shadow_ram_support = true,
1014         .led_compensation = 51,
1015         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
1016         .supports_idle = true,
1017         .adv_thermal_throttle = true,
1018         .support_ct_kill_exit = true,
1019         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
1020         .chain_noise_scale = 1500,
1021         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
1022         .max_event_log_size = 1024,
1023         .ucode_tracing = true,
1024         .sensitivity_calib_by_driver = true,
1025         .chain_noise_calib_by_driver = true,
1026         .need_dc_calib = true,
1027 };
1028
1029 struct iwl_cfg iwl6000_3agn_cfg = {
1030         .name = "Intel(R) Centrino(R) Ultimate-N 6300 AGN",
1031         .fw_name_pre = IWL6000_FW_PRE,
1032         .ucode_api_max = IWL6000_UCODE_API_MAX,
1033         .ucode_api_min = IWL6000_UCODE_API_MIN,
1034         .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
1035         .ops = &iwl6000_ops,
1036         .eeprom_size = OTP_LOW_IMAGE_SIZE,
1037         .eeprom_ver = EEPROM_6000_EEPROM_VERSION,
1038         .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
1039         .num_of_queues = IWLAGN_NUM_QUEUES,
1040         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
1041         .mod_params = &iwlagn_mod_params,
1042         .valid_tx_ant = ANT_ABC,
1043         .valid_rx_ant = ANT_ABC,
1044         .pll_cfg_val = 0,
1045         .set_l0s = true,
1046         .use_bsm = false,
1047         .pa_type = IWL_PA_SYSTEM,
1048         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
1049         .shadow_ram_support = true,
1050         .ht_greenfield_support = true,
1051         .led_compensation = 51,
1052         .use_rts_for_aggregation = true, /* use rts/cts protection */
1053         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
1054         .supports_idle = true,
1055         .adv_thermal_throttle = true,
1056         .support_ct_kill_exit = true,
1057         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
1058         .chain_noise_scale = 1000,
1059         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
1060         .max_event_log_size = 1024,
1061         .ucode_tracing = true,
1062         .sensitivity_calib_by_driver = true,
1063         .chain_noise_calib_by_driver = true,
1064 };
1065
1066 MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
1067 MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX));
1068 MODULE_FIRMWARE(IWL6000G2A_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));
1069 MODULE_FIRMWARE(IWL6000G2B_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));