drivers/net/wireless/iwlwifi/iwl-6000.c

   1 /******************************************************************************
   2  *
   3  * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
   4  *
   5  * This program is free software; you can redistribute it and/or modify it
   6  * under the terms of version 2 of the GNU General Public License as
   7  * published by the Free Software Foundation.
   8  *
   9  * This program is distributed in the hope that it will be useful, but WITHOUT
  10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  12  * more details.
  13  *
  14  * You should have received a copy of the GNU General Public License along with
  15  * this program; if not, write to the Free Software Foundation, Inc.,
  16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  17  *
  18  * The full GNU General Public License is included in this distribution in the
  19  * file called LICENSE.
  20  *
  21  * Contact Information:
  22  *  Intel Linux Wireless <ilw@linux.intel.com>
  23  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  24  *
  25  *****************************************************************************/
  26
  27 #include <linux/kernel.h>
  28 #include <linux/module.h>
  29 #include <linux/init.h>
  30 #include <linux/pci.h>
  31 #include <linux/dma-mapping.h>
  32 #include <linux/delay.h>
  33 #include <linux/skbuff.h>
  34 #include <linux/netdevice.h>
  35 #include <linux/wireless.h>
  36 #include <net/mac80211.h>
  37 #include <linux/etherdevice.h>
  38 #include <asm/unaligned.h>
  39
  40 #include "iwl-eeprom.h"
  41 #include "iwl-dev.h"
  42 #include "iwl-core.h"
  43 #include "iwl-io.h"
  44 #include "iwl-sta.h"
  45 #include "iwl-agn.h"
  46 #include "iwl-helpers.h"
  47 #include "iwl-agn-hw.h"
  48 #include "iwl-6000-hw.h"
  49 #include "iwl-agn-led.h"
  50 #include "iwl-agn-debugfs.h"
  51
  52 /* Highest firmware API version supported */
  53 #define IWL6000_UCODE_API_MAX 4
  54 #define IWL6050_UCODE_API_MAX 4
  55 #define IWL6000G2_UCODE_API_MAX 4
  56
  57 /* Lowest firmware API version supported */
  58 #define IWL6000_UCODE_API_MIN 4
  59 #define IWL6050_UCODE_API_MIN 4
  60 #define IWL6000G2_UCODE_API_MIN 4
  61
  62 #define IWL6000_FW_PRE "iwlwifi-6000-"
  63 #define _IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE #api ".ucode"
  64 #define IWL6000_MODULE_FIRMWARE(api) _IWL6000_MODULE_FIRMWARE(api)
  65
  66 #define IWL6050_FW_PRE "iwlwifi-6050-"
  67 #define _IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE #api ".ucode"
  68 #define IWL6050_MODULE_FIRMWARE(api) _IWL6050_MODULE_FIRMWARE(api)
  69
  70 #define IWL6000G2A_FW_PRE "iwlwifi-6000g2a-"
  71 #define _IWL6000G2A_MODULE_FIRMWARE(api) IWL6000G2A_FW_PRE #api ".ucode"
  72 #define IWL6000G2A_MODULE_FIRMWARE(api) _IWL6000G2A_MODULE_FIRMWARE(api)
  73
  74 #define IWL6000G2B_FW_PRE "iwlwifi-6000g2b-"
  75 #define _IWL6000G2B_MODULE_FIRMWARE(api) IWL6000G2B_FW_PRE #api ".ucode"
  76 #define IWL6000G2B_MODULE_FIRMWARE(api) _IWL6000G2B_MODULE_FIRMWARE(api)
  77
  78
  79 static void iwl6000_set_ct_threshold(struct iwl_priv *priv)
  80 {
  81         /* want Celsius */
  82         priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
  83         priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
  84 }
  85
  86 /* Indicate calibration version to uCode. */
  87 static void iwl6050_set_calib_version(struct iwl_priv *priv)
  88 {
  89         if (priv->cfg->ops->lib->eeprom_ops.calib_version(priv) >= 6)
  90                 iwl_set_bit(priv, CSR_GP_DRIVER_REG,
  91                                 CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
  92 }
  93
  94 /* NIC configuration for 6000 series */
  95 static void iwl6000_nic_config(struct iwl_priv *priv)
  96 {
  97         u16 radio_cfg;
  98
  99         radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
 100
 101         /* write radio config values to register */
 102         if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) <= EEPROM_RF_CONFIG_TYPE_MAX)
 103                 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
 104                             EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
 105                             EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
 106                             EEPROM_RF_CFG_DASH_MSK(radio_cfg));
 107
 108         /* set CSR_HW_CONFIG_REG for uCode use */
 109         iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
 110                     CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
 111                     CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
 112
 113         /* no locking required for register write */
 114         if (priv->cfg->pa_type == IWL_PA_INTERNAL) {
 115                 /* 2x2 IPA phy type */
 116                 iwl_write32(priv, CSR_GP_DRIVER_REG,
 117                              CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA);
 118         }
 119         /* else do nothing, uCode configured */
 120         if (priv->cfg->ops->lib->temp_ops.set_calib_version)
 121                 priv->cfg->ops->lib->temp_ops.set_calib_version(priv);
 122 }
 123
 124 static struct iwl_sensitivity_ranges iwl6000_sensitivity = {
 125         .min_nrg_cck = 97,
 126         .max_nrg_cck = 0, /* not used, set to 0 */
 127         .auto_corr_min_ofdm = 80,
 128         .auto_corr_min_ofdm_mrc = 128,
 129         .auto_corr_min_ofdm_x1 = 105,
 130         .auto_corr_min_ofdm_mrc_x1 = 192,
 131
 132         .auto_corr_max_ofdm = 145,
 133         .auto_corr_max_ofdm_mrc = 232,
 134         .auto_corr_max_ofdm_x1 = 110,
 135         .auto_corr_max_ofdm_mrc_x1 = 232,
 136
 137         .auto_corr_min_cck = 125,
 138         .auto_corr_max_cck = 175,
 139         .auto_corr_min_cck_mrc = 160,
 140         .auto_corr_max_cck_mrc = 310,
 141         .nrg_th_cck = 97,
 142         .nrg_th_ofdm = 100,
 143
 144         .barker_corr_th_min = 190,
 145         .barker_corr_th_min_mrc = 390,
 146         .nrg_th_cca = 62,
 147 };
 148
 149 static int iwl6000_hw_set_hw_params(struct iwl_priv *priv)
 150 {
 151         if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
 152             priv->cfg->mod_params->num_of_queues <= IWLAGN_NUM_QUEUES)
 153                 priv->cfg->num_of_queues =
 154                         priv->cfg->mod_params->num_of_queues;
 155
 156         priv->hw_params.max_txq_num = priv->cfg->num_of_queues;
 157         priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
 158         priv->hw_params.scd_bc_tbls_size =
 159                         priv->cfg->num_of_queues *
 160                         sizeof(struct iwlagn_scd_bc_tbl);
 161         priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
 162         priv->hw_params.max_stations = IWL5000_STATION_COUNT;
 163         priv->hw_params.bcast_sta_id = IWL5000_BROADCAST_ID;
 164
 165         priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE;
 166         priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE;
 167
 168         priv->hw_params.max_bsm_size = 0;
 169         priv->hw_params.ht40_channel =  BIT(IEEE80211_BAND_2GHZ) |
 170                                         BIT(IEEE80211_BAND_5GHZ);
 171         priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
 172
 173         priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
 174         priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
 175         priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
 176         priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
 177
 178         if (priv->cfg->ops->lib->temp_ops.set_ct_kill)
 179                 priv->cfg->ops->lib->temp_ops.set_ct_kill(priv);
 180
 181         /* Set initial sensitivity parameters */
 182         /* Set initial calibration set */
 183         priv->hw_params.sens = &iwl6000_sensitivity;
 184         priv->hw_params.calib_init_cfg =
 185                 BIT(IWL_CALIB_XTAL)             |
 186                 BIT(IWL_CALIB_LO)               |
 187                 BIT(IWL_CALIB_TX_IQ)            |
 188                 BIT(IWL_CALIB_BASE_BAND);
 189
 190         priv->hw_params.beacon_time_tsf_bits = IWLAGN_EXT_BEACON_TIME_POS;
 191
 192         return 0;
 193 }
 194
 195 static int iwl6050_hw_set_hw_params(struct iwl_priv *priv)
 196 {
 197         if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
 198             priv->cfg->mod_params->num_of_queues <= IWLAGN_NUM_QUEUES)
 199                 priv->cfg->num_of_queues =
 200                         priv->cfg->mod_params->num_of_queues;
 201
 202         priv->hw_params.max_txq_num = priv->cfg->num_of_queues;
 203         priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
 204         priv->hw_params.scd_bc_tbls_size =
 205                         priv->cfg->num_of_queues *
 206                         sizeof(struct iwlagn_scd_bc_tbl);
 207         priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
 208         priv->hw_params.max_stations = IWL5000_STATION_COUNT;
 209         priv->hw_params.bcast_sta_id = IWL5000_BROADCAST_ID;
 210
 211         priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE;
 212         priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE;
 213
 214         priv->hw_params.max_bsm_size = 0;
 215         priv->hw_params.ht40_channel =  BIT(IEEE80211_BAND_2GHZ) |
 216                                         BIT(IEEE80211_BAND_5GHZ);
 217         priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
 218
 219         priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
 220         priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
 221         priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
 222         priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
 223
 224         if (priv->cfg->ops->lib->temp_ops.set_ct_kill)
 225                 priv->cfg->ops->lib->temp_ops.set_ct_kill(priv);
 226
 227         /* Set initial sensitivity parameters */
 228         /* Set initial calibration set */
 229         priv->hw_params.sens = &iwl6000_sensitivity;
 230         priv->hw_params.calib_init_cfg =
 231                 BIT(IWL_CALIB_XTAL)             |
 232                 BIT(IWL_CALIB_DC)               |
 233                 BIT(IWL_CALIB_LO)               |
 234                 BIT(IWL_CALIB_TX_IQ)            |
 235                 BIT(IWL_CALIB_BASE_BAND);
 236
 237         priv->hw_params.beacon_time_tsf_bits = IWLAGN_EXT_BEACON_TIME_POS;
 238
 239         return 0;
 240 }
 241
 242 static int iwl6000_hw_channel_switch(struct iwl_priv *priv, u16 channel)
 243 {
 244         struct iwl6000_channel_switch_cmd cmd;
 245         const struct iwl_channel_info *ch_info;
 246         struct iwl_host_cmd hcmd = {
 247                 .id = REPLY_CHANNEL_SWITCH,
 248                 .len = sizeof(cmd),
 249                 .flags = CMD_SIZE_HUGE,
 250                 .data = &cmd,
 251         };
 252
 253         IWL_DEBUG_11H(priv, "channel switch from %d to %d\n",
 254                 priv->active_rxon.channel, channel);
 255
 256         cmd.band = priv->band == IEEE80211_BAND_2GHZ;
 257         cmd.channel = cpu_to_le16(channel);
 258         cmd.rxon_flags = priv->staging_rxon.flags;
 259         cmd.rxon_filter_flags = priv->staging_rxon.filter_flags;
 260         cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
 261         ch_info = iwl_get_channel_info(priv, priv->band, channel);
 262         if (ch_info)
 263                 cmd.expect_beacon = is_channel_radar(ch_info);
 264         else {
 265                 IWL_ERR(priv, "invalid channel switch from %u to %u\n",
 266                         priv->active_rxon.channel, channel);
 267                 return -EFAULT;
 268         }
 269         priv->switch_rxon.channel = cpu_to_le16(channel);
 270         priv->switch_rxon.switch_in_progress = true;
 271
 272         return iwl_send_cmd_sync(priv, &hcmd);
 273 }
 274
 275 static struct iwl_lib_ops iwl6000_lib = {
 276         .set_hw_params = iwl6000_hw_set_hw_params,
 277         .txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
 278         .txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
 279         .txq_set_sched = iwlagn_txq_set_sched,
 280         .txq_agg_enable = iwlagn_txq_agg_enable,
 281         .txq_agg_disable = iwlagn_txq_agg_disable,
 282         .txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
 283         .txq_free_tfd = iwl_hw_txq_free_tfd,
 284         .txq_init = iwl_hw_tx_queue_init,
 285         .rx_handler_setup = iwlagn_rx_handler_setup,
 286         .setup_deferred_work = iwlagn_setup_deferred_work,
 287         .is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
 288         .load_ucode = iwlagn_load_ucode,
 289         .dump_nic_event_log = iwl_dump_nic_event_log,
 290         .dump_nic_error_log = iwl_dump_nic_error_log,
 291         .dump_csr = iwl_dump_csr,
 292         .dump_fh = iwl_dump_fh,
 293         .init_alive_start = iwlagn_init_alive_start,
 294         .alive_notify = iwlagn_alive_notify,
 295         .send_tx_power = iwlagn_send_tx_power,
 296         .update_chain_flags = iwl_update_chain_flags,
 297         .set_channel_switch = iwl6000_hw_channel_switch,
 298         .apm_ops = {
 299                 .init = iwl_apm_init,
 300                 .stop = iwl_apm_stop,
 301                 .config = iwl6000_nic_config,
 302                 .set_pwr_src = iwl_set_pwr_src,
 303         },
 304         .eeprom_ops = {
 305                 .regulatory_bands = {
 306                         EEPROM_REG_BAND_1_CHANNELS,
 307                         EEPROM_REG_BAND_2_CHANNELS,
 308                         EEPROM_REG_BAND_3_CHANNELS,
 309                         EEPROM_REG_BAND_4_CHANNELS,
 310                         EEPROM_REG_BAND_5_CHANNELS,
 311                         EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
 312                         EEPROM_REG_BAND_52_HT40_CHANNELS
 313                 },
 314                 .verify_signature  = iwlcore_eeprom_verify_signature,
 315                 .acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
 316                 .release_semaphore = iwlcore_eeprom_release_semaphore,
 317                 .calib_version  = iwlagn_eeprom_calib_version,
 318                 .query_addr = iwlagn_eeprom_query_addr,
 319                 .update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower,
 320         },
 321         .post_associate = iwl_post_associate,
 322         .isr = iwl_isr_ict,
 323         .config_ap = iwl_config_ap,
 324         .temp_ops = {
 325                 .temperature = iwlagn_temperature,
 326                 .set_ct_kill = iwl6000_set_ct_threshold,
 327          },
 328         .manage_ibss_station = iwlagn_manage_ibss_station,
 329         .debugfs_ops = {
 330                 .rx_stats_read = iwl_ucode_rx_stats_read,
 331                 .tx_stats_read = iwl_ucode_tx_stats_read,
 332                 .general_stats_read = iwl_ucode_general_stats_read,
 333         },
 334         .recover_from_tx_stall = iwl_bg_monitor_recover,
 335         .check_plcp_health = iwl_good_plcp_health,
 336         .check_ack_health = iwl_good_ack_health,
 337 };
 338
 339 static const struct iwl_ops iwl6000_ops = {
 340         .lib = &iwl6000_lib,
 341         .hcmd = &iwlagn_hcmd,
 342         .utils = &iwlagn_hcmd_utils,
 343         .led = &iwlagn_led_ops,
 344 };
 345
 346 static void do_not_send_bt_config(struct iwl_priv *priv)
 347 {
 348 }
 349
 350 static struct iwl_hcmd_ops iwl6000g2b_hcmd = {
 351         .rxon_assoc = iwlagn_send_rxon_assoc,
 352         .commit_rxon = iwl_commit_rxon,
 353         .set_rxon_chain = iwl_set_rxon_chain,
 354         .set_tx_ant = iwlagn_send_tx_ant_config,
 355         .send_bt_config = do_not_send_bt_config,
 356 };
 357
 358 static const struct iwl_ops iwl6000g2b_ops = {
 359         .lib = &iwl6000_lib,
 360         .hcmd = &iwl6000g2b_hcmd,
 361         .utils = &iwlagn_hcmd_utils,
 362         .led = &iwlagn_led_ops,
 363 };
 364
 365 static struct iwl_lib_ops iwl6050_lib = {
 366         .set_hw_params = iwl6050_hw_set_hw_params,
 367         .txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
 368         .txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
 369         .txq_set_sched = iwlagn_txq_set_sched,
 370         .txq_agg_enable = iwlagn_txq_agg_enable,
 371         .txq_agg_disable = iwlagn_txq_agg_disable,
 372         .txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
 373         .txq_free_tfd = iwl_hw_txq_free_tfd,
 374         .txq_init = iwl_hw_tx_queue_init,
 375         .rx_handler_setup = iwlagn_rx_handler_setup,
 376         .setup_deferred_work = iwlagn_setup_deferred_work,
 377         .is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
 378         .load_ucode = iwlagn_load_ucode,
 379         .dump_nic_event_log = iwl_dump_nic_event_log,
 380         .dump_nic_error_log = iwl_dump_nic_error_log,
 381         .dump_csr = iwl_dump_csr,
 382         .dump_fh = iwl_dump_fh,
 383         .init_alive_start = iwlagn_init_alive_start,
 384         .alive_notify = iwlagn_alive_notify,
 385         .send_tx_power = iwlagn_send_tx_power,
 386         .update_chain_flags = iwl_update_chain_flags,
 387         .set_channel_switch = iwl6000_hw_channel_switch,
 388         .apm_ops = {
 389                 .init = iwl_apm_init,
 390                 .stop = iwl_apm_stop,
 391                 .config = iwl6000_nic_config,
 392                 .set_pwr_src = iwl_set_pwr_src,
 393         },
 394         .eeprom_ops = {
 395                 .regulatory_bands = {
 396                         EEPROM_REG_BAND_1_CHANNELS,
 397                         EEPROM_REG_BAND_2_CHANNELS,
 398                         EEPROM_REG_BAND_3_CHANNELS,
 399                         EEPROM_REG_BAND_4_CHANNELS,
 400                         EEPROM_REG_BAND_5_CHANNELS,
 401                         EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
 402                         EEPROM_REG_BAND_52_HT40_CHANNELS
 403                 },
 404                 .verify_signature  = iwlcore_eeprom_verify_signature,
 405                 .acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
 406                 .release_semaphore = iwlcore_eeprom_release_semaphore,
 407                 .calib_version  = iwlagn_eeprom_calib_version,
 408                 .query_addr = iwlagn_eeprom_query_addr,
 409                 .update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower,
 410         },
 411         .post_associate = iwl_post_associate,
 412         .isr = iwl_isr_ict,
 413         .config_ap = iwl_config_ap,
 414         .temp_ops = {
 415                 .temperature = iwlagn_temperature,
 416                 .set_ct_kill = iwl6000_set_ct_threshold,
 417                 .set_calib_version = iwl6050_set_calib_version,
 418          },
 419         .manage_ibss_station = iwlagn_manage_ibss_station,
 420         .debugfs_ops = {
 421                 .rx_stats_read = iwl_ucode_rx_stats_read,
 422                 .tx_stats_read = iwl_ucode_tx_stats_read,
 423                 .general_stats_read = iwl_ucode_general_stats_read,
 424         },
 425         .recover_from_tx_stall = iwl_bg_monitor_recover,
 426         .check_plcp_health = iwl_good_plcp_health,
 427         .check_ack_health = iwl_good_ack_health,
 428 };
 429
 430 static const struct iwl_ops iwl6050_ops = {
 431         .lib = &iwl6050_lib,
 432         .hcmd = &iwlagn_hcmd,
 433         .utils = &iwlagn_hcmd_utils,
 434         .led = &iwlagn_led_ops,
 435 };
 436
 437
 438 struct iwl_cfg iwl6000g2a_2agn_cfg = {
 439         .name = "6000 Series 2x2 AGN Gen2a",
 440         .fw_name_pre = IWL6000G2A_FW_PRE,
 441         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
 442         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
 443         .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
 444         .ops = &iwl6000_ops,
 445         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 446         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
 447         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
 448         .num_of_queues = IWLAGN_NUM_QUEUES,
 449         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 450         .mod_params = &iwlagn_mod_params,
 451         .valid_tx_ant = ANT_AB,
 452         .valid_rx_ant = ANT_AB,
 453         .pll_cfg_val = 0,
 454         .set_l0s = true,
 455         .use_bsm = false,
 456         .pa_type = IWL_PA_SYSTEM,
 457         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 458         .shadow_ram_support = true,
 459         .ht_greenfield_support = true,
 460         .led_compensation = 51,
 461         .use_rts_for_ht = true, /* use rts/cts protection */
 462         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 463         .supports_idle = true,
 464         .adv_thermal_throttle = true,
 465         .support_ct_kill_exit = true,
 466         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 467         .chain_noise_scale = 1000,
 468         .monitor_recover_period = IWL_MONITORING_PERIOD,
 469         .max_event_log_size = 512,
 470         .ucode_tracing = true,
 471         .sensitivity_calib_by_driver = true,
 472         .chain_noise_calib_by_driver = true,
 473 };
 474
 475 struct iwl_cfg iwl6000g2a_2abg_cfg = {
 476         .name = "6000 Series 2x2 ABG Gen2a",
 477         .fw_name_pre = IWL6000G2A_FW_PRE,
 478         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
 479         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
 480         .sku = IWL_SKU_A|IWL_SKU_G,
 481         .ops = &iwl6000_ops,
 482         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 483         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
 484         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
 485         .num_of_queues = IWLAGN_NUM_QUEUES,
 486         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 487         .mod_params = &iwlagn_mod_params,
 488         .valid_tx_ant = ANT_AB,
 489         .valid_rx_ant = ANT_AB,
 490         .pll_cfg_val = 0,
 491         .set_l0s = true,
 492         .use_bsm = false,
 493         .pa_type = IWL_PA_SYSTEM,
 494         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 495         .shadow_ram_support = true,
 496         .led_compensation = 51,
 497         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 498         .supports_idle = true,
 499         .adv_thermal_throttle = true,
 500         .support_ct_kill_exit = true,
 501         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 502         .chain_noise_scale = 1000,
 503         .monitor_recover_period = IWL_MONITORING_PERIOD,
 504         .max_event_log_size = 512,
 505 };
 506
 507 struct iwl_cfg iwl6000g2a_2bg_cfg = {
 508         .name = "6000 Series 2x2 BG Gen2a",
 509         .fw_name_pre = IWL6000G2A_FW_PRE,
 510         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
 511         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
 512         .sku = IWL_SKU_G,
 513         .ops = &iwl6000_ops,
 514         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 515         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
 516         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
 517         .num_of_queues = IWLAGN_NUM_QUEUES,
 518         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 519         .mod_params = &iwlagn_mod_params,
 520         .valid_tx_ant = ANT_AB,
 521         .valid_rx_ant = ANT_AB,
 522         .pll_cfg_val = 0,
 523         .set_l0s = true,
 524         .use_bsm = false,
 525         .pa_type = IWL_PA_SYSTEM,
 526         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 527         .shadow_ram_support = true,
 528         .led_compensation = 51,
 529         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 530         .supports_idle = true,
 531         .adv_thermal_throttle = true,
 532         .support_ct_kill_exit = true,
 533         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 534         .chain_noise_scale = 1000,
 535         .monitor_recover_period = IWL_MONITORING_PERIOD,
 536         .max_event_log_size = 512,
 537 };
 538
 539 struct iwl_cfg iwl6000g2b_2agn_cfg = {
 540         .name = "6000 Series 2x2 AGN Gen2b",
 541         .fw_name_pre = IWL6000G2B_FW_PRE,
 542         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
 543         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
 544         .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
 545         .ops = &iwl6000g2b_ops,
 546         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 547         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
 548         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
 549         .num_of_queues = IWLAGN_NUM_QUEUES,
 550         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 551         .mod_params = &iwlagn_mod_params,
 552         .valid_tx_ant = ANT_AB,
 553         .valid_rx_ant = ANT_AB,
 554         .pll_cfg_val = 0,
 555         .set_l0s = true,
 556         .use_bsm = false,
 557         .pa_type = IWL_PA_SYSTEM,
 558         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 559         .shadow_ram_support = true,
 560         .ht_greenfield_support = true,
 561         .led_compensation = 51,
 562         .use_rts_for_ht = true, /* use rts/cts protection */
 563         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 564         .supports_idle = true,
 565         .adv_thermal_throttle = true,
 566         .support_ct_kill_exit = true,
 567         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 568         .chain_noise_scale = 1000,
 569         .monitor_recover_period = IWL_MONITORING_PERIOD,
 570         .max_event_log_size = 512,
 571 };
 572
 573 struct iwl_cfg iwl6000g2b_2abg_cfg = {
 574         .name = "6000 Series 2x2 ABG Gen2b",
 575         .fw_name_pre = IWL6000G2B_FW_PRE,
 576         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
 577         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
 578         .sku = IWL_SKU_A|IWL_SKU_G,
 579         .ops = &iwl6000g2b_ops,
 580         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 581         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
 582         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
 583         .num_of_queues = IWLAGN_NUM_QUEUES,
 584         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 585         .mod_params = &iwlagn_mod_params,
 586         .valid_tx_ant = ANT_AB,
 587         .valid_rx_ant = ANT_AB,
 588         .pll_cfg_val = 0,
 589         .set_l0s = true,
 590         .use_bsm = false,
 591         .pa_type = IWL_PA_SYSTEM,
 592         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 593         .shadow_ram_support = true,
 594         .led_compensation = 51,
 595         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 596         .supports_idle = true,
 597         .adv_thermal_throttle = true,
 598         .support_ct_kill_exit = true,
 599         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 600         .chain_noise_scale = 1000,
 601         .monitor_recover_period = IWL_MONITORING_PERIOD,
 602         .max_event_log_size = 512,
 603 };
 604
 605 struct iwl_cfg iwl6000g2b_2bgn_cfg = {
 606         .name = "6000 Series 2x2 BGN Gen2b",
 607         .fw_name_pre = IWL6000G2B_FW_PRE,
 608         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
 609         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
 610         .sku = IWL_SKU_G|IWL_SKU_N,
 611         .ops = &iwl6000g2b_ops,
 612         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 613         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
 614         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
 615         .num_of_queues = IWLAGN_NUM_QUEUES,
 616         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 617         .mod_params = &iwlagn_mod_params,
 618         .valid_tx_ant = ANT_AB,
 619         .valid_rx_ant = ANT_AB,
 620         .pll_cfg_val = 0,
 621         .set_l0s = true,
 622         .use_bsm = false,
 623         .pa_type = IWL_PA_SYSTEM,
 624         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 625         .shadow_ram_support = true,
 626         .ht_greenfield_support = true,
 627         .led_compensation = 51,
 628         .use_rts_for_ht = true, /* use rts/cts protection */
 629         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 630         .supports_idle = true,
 631         .adv_thermal_throttle = true,
 632         .support_ct_kill_exit = true,
 633         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 634         .chain_noise_scale = 1000,
 635         .monitor_recover_period = IWL_MONITORING_PERIOD,
 636         .max_event_log_size = 512,
 637 };
 638
 639 struct iwl_cfg iwl6000g2b_2bg_cfg = {
 640         .name = "6000 Series 2x2 BG Gen2b",
 641         .fw_name_pre = IWL6000G2B_FW_PRE,
 642         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
 643         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
 644         .sku = IWL_SKU_G,
 645         .ops = &iwl6000g2b_ops,
 646         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 647         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
 648         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
 649         .num_of_queues = IWLAGN_NUM_QUEUES,
 650         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 651         .mod_params = &iwlagn_mod_params,
 652         .valid_tx_ant = ANT_AB,
 653         .valid_rx_ant = ANT_AB,
 654         .pll_cfg_val = 0,
 655         .set_l0s = true,
 656         .use_bsm = false,
 657         .pa_type = IWL_PA_SYSTEM,
 658         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 659         .shadow_ram_support = true,
 660         .led_compensation = 51,
 661         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 662         .supports_idle = true,
 663         .adv_thermal_throttle = true,
 664         .support_ct_kill_exit = true,
 665         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 666         .chain_noise_scale = 1000,
 667         .monitor_recover_period = IWL_MONITORING_PERIOD,
 668         .max_event_log_size = 512,
 669 };
 670
 671 struct iwl_cfg iwl6000g2b_bgn_cfg = {
 672         .name = "6000 Series 1x2 BGN Gen2b",
 673         .fw_name_pre = IWL6000G2B_FW_PRE,
 674         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
 675         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
 676         .sku = IWL_SKU_G|IWL_SKU_N,
 677         .ops = &iwl6000g2b_ops,
 678         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 679         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
 680         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
 681         .num_of_queues = IWLAGN_NUM_QUEUES,
 682         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 683         .mod_params = &iwlagn_mod_params,
 684         .valid_tx_ant = ANT_A,
 685         .valid_rx_ant = ANT_AB,
 686         .pll_cfg_val = 0,
 687         .set_l0s = true,
 688         .use_bsm = false,
 689         .pa_type = IWL_PA_SYSTEM,
 690         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 691         .shadow_ram_support = true,
 692         .ht_greenfield_support = true,
 693         .led_compensation = 51,
 694         .use_rts_for_ht = true, /* use rts/cts protection */
 695         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 696         .supports_idle = true,
 697         .adv_thermal_throttle = true,
 698         .support_ct_kill_exit = true,
 699         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 700         .chain_noise_scale = 1000,
 701         .monitor_recover_period = IWL_MONITORING_PERIOD,
 702         .max_event_log_size = 512,
 703 };
 704
 705 struct iwl_cfg iwl6000g2b_bg_cfg = {
 706         .name = "6000 Series 1x2 BG Gen2b",
 707         .fw_name_pre = IWL6000G2B_FW_PRE,
 708         .ucode_api_max = IWL6000G2_UCODE_API_MAX,
 709         .ucode_api_min = IWL6000G2_UCODE_API_MIN,
 710         .sku = IWL_SKU_G,
 711         .ops = &iwl6000g2b_ops,
 712         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 713         .eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
 714         .eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
 715         .num_of_queues = IWLAGN_NUM_QUEUES,
 716         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 717         .mod_params = &iwlagn_mod_params,
 718         .valid_tx_ant = ANT_A,
 719         .valid_rx_ant = ANT_AB,
 720         .pll_cfg_val = 0,
 721         .set_l0s = true,
 722         .use_bsm = false,
 723         .pa_type = IWL_PA_SYSTEM,
 724         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 725         .shadow_ram_support = true,
 726         .led_compensation = 51,
 727         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 728         .supports_idle = true,
 729         .adv_thermal_throttle = true,
 730         .support_ct_kill_exit = true,
 731         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 732         .chain_noise_scale = 1000,
 733         .monitor_recover_period = IWL_MONITORING_PERIOD,
 734         .max_event_log_size = 512,
 735 };
 736
 737 /*
 738  * "i": Internal configuration, use internal Power Amplifier
 739  */
 740 struct iwl_cfg iwl6000i_2agn_cfg = {
 741         .name = "Intel(R) Centrino(R) Advanced-N 6200 AGN",
 742         .fw_name_pre = IWL6000_FW_PRE,
 743         .ucode_api_max = IWL6000_UCODE_API_MAX,
 744         .ucode_api_min = IWL6000_UCODE_API_MIN,
 745         .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
 746         .ops = &iwl6000_ops,
 747         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 748         .eeprom_ver = EEPROM_6000_EEPROM_VERSION,
 749         .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
 750         .num_of_queues = IWLAGN_NUM_QUEUES,
 751         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 752         .mod_params = &iwlagn_mod_params,
 753         .valid_tx_ant = ANT_BC,
 754         .valid_rx_ant = ANT_BC,
 755         .pll_cfg_val = 0,
 756         .set_l0s = true,
 757         .use_bsm = false,
 758         .pa_type = IWL_PA_INTERNAL,
 759         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 760         .shadow_ram_support = true,
 761         .ht_greenfield_support = true,
 762         .led_compensation = 51,
 763         .use_rts_for_ht = true, /* use rts/cts protection */
 764         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 765         .supports_idle = true,
 766         .adv_thermal_throttle = true,
 767         .support_ct_kill_exit = true,
 768         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 769         .chain_noise_scale = 1000,
 770         .monitor_recover_period = IWL_MONITORING_PERIOD,
 771         .max_event_log_size = 1024,
 772         .ucode_tracing = true,
 773         .sensitivity_calib_by_driver = true,
 774         .chain_noise_calib_by_driver = true,
 775 };
 776
 777 struct iwl_cfg iwl6000i_2abg_cfg = {
 778         .name = "Intel(R) Centrino(R) Advanced-N 6200 ABG",
 779         .fw_name_pre = IWL6000_FW_PRE,
 780         .ucode_api_max = IWL6000_UCODE_API_MAX,
 781         .ucode_api_min = IWL6000_UCODE_API_MIN,
 782         .sku = IWL_SKU_A|IWL_SKU_G,
 783         .ops = &iwl6000_ops,
 784         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 785         .eeprom_ver = EEPROM_6000_EEPROM_VERSION,
 786         .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
 787         .num_of_queues = IWLAGN_NUM_QUEUES,
 788         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 789         .mod_params = &iwlagn_mod_params,
 790         .valid_tx_ant = ANT_BC,
 791         .valid_rx_ant = ANT_BC,
 792         .pll_cfg_val = 0,
 793         .set_l0s = true,
 794         .use_bsm = false,
 795         .pa_type = IWL_PA_INTERNAL,
 796         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 797         .shadow_ram_support = true,
 798         .led_compensation = 51,
 799         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 800         .supports_idle = true,
 801         .adv_thermal_throttle = true,
 802         .support_ct_kill_exit = true,
 803         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 804         .chain_noise_scale = 1000,
 805         .monitor_recover_period = IWL_MONITORING_PERIOD,
 806         .max_event_log_size = 1024,
 807         .ucode_tracing = true,
 808         .sensitivity_calib_by_driver = true,
 809         .chain_noise_calib_by_driver = true,
 810 };
 811
 812 struct iwl_cfg iwl6000i_2bg_cfg = {
 813         .name = "Intel(R) Centrino(R) Advanced-N 6200 BG",
 814         .fw_name_pre = IWL6000_FW_PRE,
 815         .ucode_api_max = IWL6000_UCODE_API_MAX,
 816         .ucode_api_min = IWL6000_UCODE_API_MIN,
 817         .sku = IWL_SKU_G,
 818         .ops = &iwl6000_ops,
 819         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 820         .eeprom_ver = EEPROM_6000_EEPROM_VERSION,
 821         .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
 822         .num_of_queues = IWLAGN_NUM_QUEUES,
 823         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 824         .mod_params = &iwlagn_mod_params,
 825         .valid_tx_ant = ANT_BC,
 826         .valid_rx_ant = ANT_BC,
 827         .pll_cfg_val = 0,
 828         .set_l0s = true,
 829         .use_bsm = false,
 830         .pa_type = IWL_PA_INTERNAL,
 831         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 832         .shadow_ram_support = true,
 833         .led_compensation = 51,
 834         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 835         .supports_idle = true,
 836         .adv_thermal_throttle = true,
 837         .support_ct_kill_exit = true,
 838         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 839         .chain_noise_scale = 1000,
 840         .monitor_recover_period = IWL_MONITORING_PERIOD,
 841         .max_event_log_size = 1024,
 842         .ucode_tracing = true,
 843         .sensitivity_calib_by_driver = true,
 844         .chain_noise_calib_by_driver = true,
 845 };
 846
 847 struct iwl_cfg iwl6050_2agn_cfg = {
 848         .name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN",
 849         .fw_name_pre = IWL6050_FW_PRE,
 850         .ucode_api_max = IWL6050_UCODE_API_MAX,
 851         .ucode_api_min = IWL6050_UCODE_API_MIN,
 852         .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
 853         .ops = &iwl6050_ops,
 854         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 855         .eeprom_ver = EEPROM_6050_EEPROM_VERSION,
 856         .eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,
 857         .num_of_queues = IWLAGN_NUM_QUEUES,
 858         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 859         .mod_params = &iwlagn_mod_params,
 860         .valid_tx_ant = ANT_AB,
 861         .valid_rx_ant = ANT_AB,
 862         .pll_cfg_val = 0,
 863         .set_l0s = true,
 864         .use_bsm = false,
 865         .pa_type = IWL_PA_SYSTEM,
 866         .max_ll_items = OTP_MAX_LL_ITEMS_6x50,
 867         .shadow_ram_support = true,
 868         .ht_greenfield_support = true,
 869         .led_compensation = 51,
 870         .use_rts_for_ht = true, /* use rts/cts protection */
 871         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 872         .supports_idle = true,
 873         .adv_thermal_throttle = true,
 874         .support_ct_kill_exit = true,
 875         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 876         .chain_noise_scale = 1500,
 877         .monitor_recover_period = IWL_MONITORING_PERIOD,
 878         .max_event_log_size = 1024,
 879         .ucode_tracing = true,
 880         .sensitivity_calib_by_driver = true,
 881         .chain_noise_calib_by_driver = true,
 882 };
 883
 884 struct iwl_cfg iwl6050_2abg_cfg = {
 885         .name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG",
 886         .fw_name_pre = IWL6050_FW_PRE,
 887         .ucode_api_max = IWL6050_UCODE_API_MAX,
 888         .ucode_api_min = IWL6050_UCODE_API_MIN,
 889         .sku = IWL_SKU_A|IWL_SKU_G,
 890         .ops = &iwl6050_ops,
 891         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 892         .eeprom_ver = EEPROM_6050_EEPROM_VERSION,
 893         .eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,
 894         .num_of_queues = IWLAGN_NUM_QUEUES,
 895         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 896         .mod_params = &iwlagn_mod_params,
 897         .valid_tx_ant = ANT_AB,
 898         .valid_rx_ant = ANT_AB,
 899         .pll_cfg_val = 0,
 900         .set_l0s = true,
 901         .use_bsm = false,
 902         .pa_type = IWL_PA_SYSTEM,
 903         .max_ll_items = OTP_MAX_LL_ITEMS_6x50,
 904         .shadow_ram_support = true,
 905         .led_compensation = 51,
 906         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 907         .supports_idle = true,
 908         .adv_thermal_throttle = true,
 909         .support_ct_kill_exit = true,
 910         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 911         .chain_noise_scale = 1500,
 912         .monitor_recover_period = IWL_MONITORING_PERIOD,
 913         .max_event_log_size = 1024,
 914         .ucode_tracing = true,
 915         .sensitivity_calib_by_driver = true,
 916         .chain_noise_calib_by_driver = true,
 917 };
 918
 919 struct iwl_cfg iwl6000_3agn_cfg = {
 920         .name = "Intel(R) Centrino(R) Ultimate-N 6300 AGN",
 921         .fw_name_pre = IWL6000_FW_PRE,
 922         .ucode_api_max = IWL6000_UCODE_API_MAX,
 923         .ucode_api_min = IWL6000_UCODE_API_MIN,
 924         .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
 925         .ops = &iwl6000_ops,
 926         .eeprom_size = OTP_LOW_IMAGE_SIZE,
 927         .eeprom_ver = EEPROM_6000_EEPROM_VERSION,
 928         .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
 929         .num_of_queues = IWLAGN_NUM_QUEUES,
 930         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 931         .mod_params = &iwlagn_mod_params,
 932         .valid_tx_ant = ANT_ABC,
 933         .valid_rx_ant = ANT_ABC,
 934         .pll_cfg_val = 0,
 935         .set_l0s = true,
 936         .use_bsm = false,
 937         .pa_type = IWL_PA_SYSTEM,
 938         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 939         .shadow_ram_support = true,
 940         .ht_greenfield_support = true,
 941         .led_compensation = 51,
 942         .use_rts_for_ht = true, /* use rts/cts protection */
 943         .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 944         .supports_idle = true,
 945         .adv_thermal_throttle = true,
 946         .support_ct_kill_exit = true,
 947         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 948         .chain_noise_scale = 1000,
 949         .monitor_recover_period = IWL_MONITORING_PERIOD,
 950         .max_event_log_size = 1024,
 951         .ucode_tracing = true,
 952         .sensitivity_calib_by_driver = true,
 953         .chain_noise_calib_by_driver = true,
 954 };
 955
 956 MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
 957 MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX));
 958 MODULE_FIRMWARE(IWL6000G2A_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));
 959 MODULE_FIRMWARE(IWL6000G2B_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));