1 /******************************************************************************
5 * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of version 2 of the GNU General Public License as
9 * published by the Free Software Foundation.
11 * This program is distributed in the hope that it will be useful, but
12 * WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 * General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
21 * The full GNU General Public License is included in this distribution
22 * in the file called LICENSE.GPL.
24 * Contact Information:
25 * Intel Linux Wireless <ilw@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
28 *****************************************************************************/
29 #include <linux/etherdevice.h>
30 #include <linux/kernel.h>
31 #include <linux/module.h>
32 #include <linux/init.h>
33 #include <linux/sched.h>
38 #include "iwl-helpers.h"
39 #include "iwl-agn-hw.h"
43 static inline u32
iwlagn_get_scd_ssn(struct iwlagn_tx_resp
*tx_resp
)
45 return le32_to_cpup((__le32
*)&tx_resp
->status
+
46 tx_resp
->frame_count
) & MAX_SN
;
49 static void iwlagn_count_tx_err_status(struct iwl_priv
*priv
, u16 status
)
51 status
&= TX_STATUS_MSK
;
54 case TX_STATUS_POSTPONE_DELAY
:
55 priv
->_agn
.reply_tx_stats
.pp_delay
++;
57 case TX_STATUS_POSTPONE_FEW_BYTES
:
58 priv
->_agn
.reply_tx_stats
.pp_few_bytes
++;
60 case TX_STATUS_POSTPONE_BT_PRIO
:
61 priv
->_agn
.reply_tx_stats
.pp_bt_prio
++;
63 case TX_STATUS_POSTPONE_QUIET_PERIOD
:
64 priv
->_agn
.reply_tx_stats
.pp_quiet_period
++;
66 case TX_STATUS_POSTPONE_CALC_TTAK
:
67 priv
->_agn
.reply_tx_stats
.pp_calc_ttak
++;
69 case TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY
:
70 priv
->_agn
.reply_tx_stats
.int_crossed_retry
++;
72 case TX_STATUS_FAIL_SHORT_LIMIT
:
73 priv
->_agn
.reply_tx_stats
.short_limit
++;
75 case TX_STATUS_FAIL_LONG_LIMIT
:
76 priv
->_agn
.reply_tx_stats
.long_limit
++;
78 case TX_STATUS_FAIL_FIFO_UNDERRUN
:
79 priv
->_agn
.reply_tx_stats
.fifo_underrun
++;
81 case TX_STATUS_FAIL_DRAIN_FLOW
:
82 priv
->_agn
.reply_tx_stats
.drain_flow
++;
84 case TX_STATUS_FAIL_RFKILL_FLUSH
:
85 priv
->_agn
.reply_tx_stats
.rfkill_flush
++;
87 case TX_STATUS_FAIL_LIFE_EXPIRE
:
88 priv
->_agn
.reply_tx_stats
.life_expire
++;
90 case TX_STATUS_FAIL_DEST_PS
:
91 priv
->_agn
.reply_tx_stats
.dest_ps
++;
93 case TX_STATUS_FAIL_HOST_ABORTED
:
94 priv
->_agn
.reply_tx_stats
.host_abort
++;
96 case TX_STATUS_FAIL_BT_RETRY
:
97 priv
->_agn
.reply_tx_stats
.bt_retry
++;
99 case TX_STATUS_FAIL_STA_INVALID
:
100 priv
->_agn
.reply_tx_stats
.sta_invalid
++;
102 case TX_STATUS_FAIL_FRAG_DROPPED
:
103 priv
->_agn
.reply_tx_stats
.frag_drop
++;
105 case TX_STATUS_FAIL_TID_DISABLE
:
106 priv
->_agn
.reply_tx_stats
.tid_disable
++;
108 case TX_STATUS_FAIL_FIFO_FLUSHED
:
109 priv
->_agn
.reply_tx_stats
.fifo_flush
++;
111 case TX_STATUS_FAIL_INSUFFICIENT_CF_POLL
:
112 priv
->_agn
.reply_tx_stats
.insuff_cf_poll
++;
114 case TX_STATUS_FAIL_PASSIVE_NO_RX
:
115 priv
->_agn
.reply_tx_stats
.fail_hw_drop
++;
117 case TX_STATUS_FAIL_NO_BEACON_ON_RADAR
:
118 priv
->_agn
.reply_tx_stats
.sta_color_mismatch
++;
121 priv
->_agn
.reply_tx_stats
.unknown
++;
126 static void iwlagn_count_agg_tx_err_status(struct iwl_priv
*priv
, u16 status
)
128 status
&= AGG_TX_STATUS_MSK
;
131 case AGG_TX_STATE_UNDERRUN_MSK
:
132 priv
->_agn
.reply_agg_tx_stats
.underrun
++;
134 case AGG_TX_STATE_BT_PRIO_MSK
:
135 priv
->_agn
.reply_agg_tx_stats
.bt_prio
++;
137 case AGG_TX_STATE_FEW_BYTES_MSK
:
138 priv
->_agn
.reply_agg_tx_stats
.few_bytes
++;
140 case AGG_TX_STATE_ABORT_MSK
:
141 priv
->_agn
.reply_agg_tx_stats
.abort
++;
143 case AGG_TX_STATE_LAST_SENT_TTL_MSK
:
144 priv
->_agn
.reply_agg_tx_stats
.last_sent_ttl
++;
146 case AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK
:
147 priv
->_agn
.reply_agg_tx_stats
.last_sent_try
++;
149 case AGG_TX_STATE_LAST_SENT_BT_KILL_MSK
:
150 priv
->_agn
.reply_agg_tx_stats
.last_sent_bt_kill
++;
152 case AGG_TX_STATE_SCD_QUERY_MSK
:
153 priv
->_agn
.reply_agg_tx_stats
.scd_query
++;
155 case AGG_TX_STATE_TEST_BAD_CRC32_MSK
:
156 priv
->_agn
.reply_agg_tx_stats
.bad_crc32
++;
158 case AGG_TX_STATE_RESPONSE_MSK
:
159 priv
->_agn
.reply_agg_tx_stats
.response
++;
161 case AGG_TX_STATE_DUMP_TX_MSK
:
162 priv
->_agn
.reply_agg_tx_stats
.dump_tx
++;
164 case AGG_TX_STATE_DELAY_TX_MSK
:
165 priv
->_agn
.reply_agg_tx_stats
.delay_tx
++;
168 priv
->_agn
.reply_agg_tx_stats
.unknown
++;
173 static void iwlagn_set_tx_status(struct iwl_priv
*priv
,
174 struct ieee80211_tx_info
*info
,
175 struct iwlagn_tx_resp
*tx_resp
,
176 int txq_id
, bool is_agg
)
178 u16 status
= le16_to_cpu(tx_resp
->status
.status
);
180 info
->status
.rates
[0].count
= tx_resp
->failure_frame
+ 1;
182 info
->flags
&= ~IEEE80211_TX_CTL_AMPDU
;
183 info
->flags
|= iwl_tx_status_to_mac80211(status
);
184 iwlagn_hwrate_to_tx_control(priv
, le32_to_cpu(tx_resp
->rate_n_flags
),
186 if (!iwl_is_tx_success(status
))
187 iwlagn_count_tx_err_status(priv
, status
);
189 IWL_DEBUG_TX_REPLY(priv
, "TXQ %d status %s (0x%08x) rate_n_flags "
192 iwl_get_tx_fail_reason(status
), status
,
193 le32_to_cpu(tx_resp
->rate_n_flags
),
194 tx_resp
->failure_frame
);
197 #ifdef CONFIG_IWLWIFI_DEBUG
198 #define AGG_TX_STATE_FAIL(x) case AGG_TX_STATE_ ## x: return #x
200 const char *iwl_get_agg_tx_fail_reason(u16 status
)
202 status
&= AGG_TX_STATUS_MSK
;
204 case AGG_TX_STATE_TRANSMITTED
:
206 AGG_TX_STATE_FAIL(UNDERRUN_MSK
);
207 AGG_TX_STATE_FAIL(BT_PRIO_MSK
);
208 AGG_TX_STATE_FAIL(FEW_BYTES_MSK
);
209 AGG_TX_STATE_FAIL(ABORT_MSK
);
210 AGG_TX_STATE_FAIL(LAST_SENT_TTL_MSK
);
211 AGG_TX_STATE_FAIL(LAST_SENT_TRY_CNT_MSK
);
212 AGG_TX_STATE_FAIL(LAST_SENT_BT_KILL_MSK
);
213 AGG_TX_STATE_FAIL(SCD_QUERY_MSK
);
214 AGG_TX_STATE_FAIL(TEST_BAD_CRC32_MSK
);
215 AGG_TX_STATE_FAIL(RESPONSE_MSK
);
216 AGG_TX_STATE_FAIL(DUMP_TX_MSK
);
217 AGG_TX_STATE_FAIL(DELAY_TX_MSK
);
222 #endif /* CONFIG_IWLWIFI_DEBUG */
224 static int iwlagn_tx_status_reply_tx(struct iwl_priv
*priv
,
225 struct iwl_ht_agg
*agg
,
226 struct iwlagn_tx_resp
*tx_resp
,
227 int txq_id
, u16 start_idx
)
230 struct agg_tx_status
*frame_status
= &tx_resp
->status
;
231 struct ieee80211_hdr
*hdr
= NULL
;
235 if (agg
->wait_for_ba
)
236 IWL_DEBUG_TX_REPLY(priv
, "got tx response w/o block-ack\n");
238 agg
->frame_count
= tx_resp
->frame_count
;
239 agg
->start_idx
= start_idx
;
240 agg
->rate_n_flags
= le32_to_cpu(tx_resp
->rate_n_flags
);
243 /* # frames attempted by Tx command */
244 if (agg
->frame_count
== 1) {
245 /* Only one frame was attempted; no block-ack will arrive */
248 IWL_DEBUG_TX_REPLY(priv
, "FrameCnt = %d, StartIdx=%d idx=%d\n",
249 agg
->frame_count
, agg
->start_idx
, idx
);
250 iwlagn_set_tx_status(priv
,
252 priv
->txq
[txq_id
].txb
[idx
].skb
),
253 tx_resp
, txq_id
, true);
254 agg
->wait_for_ba
= 0;
256 /* Two or more frames were attempted; expect block-ack */
260 * Start is the lowest frame sent. It may not be the first
261 * frame in the batch; we figure this out dynamically during
262 * the following loop.
264 int start
= agg
->start_idx
;
266 /* Construct bit-map of pending frames within Tx window */
267 for (i
= 0; i
< agg
->frame_count
; i
++) {
269 status
= le16_to_cpu(frame_status
[i
].status
);
270 seq
= le16_to_cpu(frame_status
[i
].sequence
);
271 idx
= SEQ_TO_INDEX(seq
);
272 txq_id
= SEQ_TO_QUEUE(seq
);
274 if (status
& AGG_TX_STATUS_MSK
)
275 iwlagn_count_agg_tx_err_status(priv
, status
);
277 if (status
& (AGG_TX_STATE_FEW_BYTES_MSK
|
278 AGG_TX_STATE_ABORT_MSK
))
281 IWL_DEBUG_TX_REPLY(priv
, "FrameCnt = %d, txq_id=%d idx=%d\n",
282 agg
->frame_count
, txq_id
, idx
);
283 IWL_DEBUG_TX_REPLY(priv
, "status %s (0x%08x), "
284 "try-count (0x%08x)\n",
285 iwl_get_agg_tx_fail_reason(status
),
286 status
& AGG_TX_STATUS_MSK
,
287 status
& AGG_TX_TRY_MSK
);
289 hdr
= iwl_tx_queue_get_hdr(priv
, txq_id
, idx
);
292 "BUG_ON idx doesn't point to valid skb"
293 " idx=%d, txq_id=%d\n", idx
, txq_id
);
297 sc
= le16_to_cpu(hdr
->seq_ctrl
);
298 if (idx
!= (SEQ_TO_SN(sc
) & 0xff)) {
300 "BUG_ON idx doesn't match seq control"
301 " idx=%d, seq_idx=%d, seq=%d\n",
307 IWL_DEBUG_TX_REPLY(priv
, "AGG Frame i=%d idx %d seq=%d\n",
308 i
, idx
, SEQ_TO_SN(sc
));
311 * sh -> how many frames ahead of the starting frame is
314 * Note that all frames sent in the batch must be in a
315 * 64-frame window, so this number should be in [0,63].
316 * If outside of this window, then we've found a new
317 * "first" frame in the batch and need to change start.
322 * If >= 64, out of window. start must be at the front
323 * of the circular buffer, idx must be near the end of
324 * the buffer, and idx is the new "first" frame. Shift
325 * the indices around.
328 /* Shift bitmap by start - idx, wrapped */
329 sh
= 0x100 - idx
+ start
;
330 bitmap
= bitmap
<< sh
;
331 /* Now idx is the new start so sh = 0 */
335 * If <= -64 then wraps the 256-pkt circular buffer
336 * (e.g., start = 255 and idx = 0, sh should be 1)
338 } else if (sh
<= -64) {
339 sh
= 0x100 - start
+ idx
;
341 * If < 0 but > -64, out of window. idx is before start
342 * but not wrapped. Shift the indices around.
345 /* Shift by how far start is ahead of idx */
347 bitmap
= bitmap
<< sh
;
348 /* Now idx is the new start so sh = 0 */
352 /* Sequence number start + sh was sent in this batch */
353 bitmap
|= 1ULL << sh
;
354 IWL_DEBUG_TX_REPLY(priv
, "start=%d bitmap=0x%llx\n",
355 start
, (unsigned long long)bitmap
);
359 * Store the bitmap and possibly the new start, if we wrapped
362 agg
->bitmap
= bitmap
;
363 agg
->start_idx
= start
;
364 IWL_DEBUG_TX_REPLY(priv
, "Frames %d start_idx=%d bitmap=0x%llx\n",
365 agg
->frame_count
, agg
->start_idx
,
366 (unsigned long long)agg
->bitmap
);
369 agg
->wait_for_ba
= 1;
374 void iwl_check_abort_status(struct iwl_priv
*priv
,
375 u8 frame_count
, u32 status
)
377 if (frame_count
== 1 && status
== TX_STATUS_FAIL_RFKILL_FLUSH
) {
378 IWL_ERR(priv
, "Tx flush command to flush out all frames\n");
379 if (!test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
380 queue_work(priv
->workqueue
, &priv
->tx_flush
);
384 static void iwlagn_rx_reply_tx(struct iwl_priv
*priv
,
385 struct iwl_rx_mem_buffer
*rxb
)
387 struct iwl_rx_packet
*pkt
= rxb_addr(rxb
);
388 u16 sequence
= le16_to_cpu(pkt
->hdr
.sequence
);
389 int txq_id
= SEQ_TO_QUEUE(sequence
);
390 int index
= SEQ_TO_INDEX(sequence
);
391 struct iwl_tx_queue
*txq
= &priv
->txq
[txq_id
];
392 struct ieee80211_tx_info
*info
;
393 struct iwlagn_tx_resp
*tx_resp
= (void *)&pkt
->u
.raw
[0];
394 u32 status
= le16_to_cpu(tx_resp
->status
.status
);
400 if ((index
>= txq
->q
.n_bd
) || (iwl_queue_used(&txq
->q
, index
) == 0)) {
401 IWL_ERR(priv
, "Read index for DMA queue txq_id (%d) index %d "
402 "is out of range [0-%d] %d %d\n", txq_id
,
403 index
, txq
->q
.n_bd
, txq
->q
.write_ptr
,
408 info
= IEEE80211_SKB_CB(txq
->txb
[txq
->q
.read_ptr
].skb
);
409 memset(&info
->status
, 0, sizeof(info
->status
));
411 tid
= (tx_resp
->ra_tid
& IWLAGN_TX_RES_TID_MSK
) >>
412 IWLAGN_TX_RES_TID_POS
;
413 sta_id
= (tx_resp
->ra_tid
& IWLAGN_TX_RES_RA_MSK
) >>
414 IWLAGN_TX_RES_RA_POS
;
416 spin_lock_irqsave(&priv
->sta_lock
, flags
);
417 if (txq
->sched_retry
) {
418 const u32 scd_ssn
= iwlagn_get_scd_ssn(tx_resp
);
419 struct iwl_ht_agg
*agg
;
421 agg
= &priv
->stations
[sta_id
].tid
[tid
].agg
;
423 * If the BT kill count is non-zero, we'll get this
424 * notification again.
426 if (tx_resp
->bt_kill_count
&& tx_resp
->frame_count
== 1 &&
427 priv
->cfg
->bt_params
&&
428 priv
->cfg
->bt_params
->advanced_bt_coexist
) {
429 IWL_WARN(priv
, "receive reply tx with bt_kill\n");
431 iwlagn_tx_status_reply_tx(priv
, agg
, tx_resp
, txq_id
, index
);
433 /* check if BAR is needed */
434 if ((tx_resp
->frame_count
== 1) && !iwl_is_tx_success(status
))
435 info
->flags
|= IEEE80211_TX_STAT_AMPDU_NO_BACK
;
437 if (txq
->q
.read_ptr
!= (scd_ssn
& 0xff)) {
438 index
= iwl_queue_dec_wrap(scd_ssn
& 0xff, txq
->q
.n_bd
);
439 IWL_DEBUG_TX_REPLY(priv
, "Retry scheduler reclaim "
440 "scd_ssn=%d idx=%d txq=%d swq=%d\n",
441 scd_ssn
, index
, txq_id
, txq
->swq_id
);
443 freed
= iwlagn_tx_queue_reclaim(priv
, txq_id
, index
);
444 iwl_free_tfds_in_queue(priv
, sta_id
, tid
, freed
);
446 if (priv
->mac80211_registered
&&
447 (iwl_queue_space(&txq
->q
) > txq
->q
.low_mark
) &&
448 (agg
->state
!= IWL_EMPTYING_HW_QUEUE_DELBA
)) {
449 if (agg
->state
== IWL_AGG_OFF
)
450 iwl_wake_queue(priv
, txq_id
);
452 iwl_wake_queue(priv
, txq
->swq_id
);
456 BUG_ON(txq_id
!= txq
->swq_id
);
457 iwlagn_set_tx_status(priv
, info
, tx_resp
, txq_id
, false);
458 freed
= iwlagn_tx_queue_reclaim(priv
, txq_id
, index
);
459 iwl_free_tfds_in_queue(priv
, sta_id
, tid
, freed
);
461 if (priv
->mac80211_registered
&&
462 (iwl_queue_space(&txq
->q
) > txq
->q
.low_mark
))
463 iwl_wake_queue(priv
, txq_id
);
466 iwlagn_txq_check_empty(priv
, sta_id
, tid
, txq_id
);
468 iwl_check_abort_status(priv
, tx_resp
->frame_count
, status
);
469 spin_unlock_irqrestore(&priv
->sta_lock
, flags
);
472 void iwlagn_rx_handler_setup(struct iwl_priv
*priv
)
474 /* init calibration handlers */
475 priv
->rx_handlers
[CALIBRATION_RES_NOTIFICATION
] =
476 iwlagn_rx_calib_result
;
477 priv
->rx_handlers
[CALIBRATION_COMPLETE_NOTIFICATION
] =
478 iwlagn_rx_calib_complete
;
479 priv
->rx_handlers
[REPLY_TX
] = iwlagn_rx_reply_tx
;
482 void iwlagn_setup_deferred_work(struct iwl_priv
*priv
)
484 /* in agn, the tx power calibration is done in uCode */
485 priv
->disable_tx_power_cal
= 1;
488 int iwlagn_hw_valid_rtc_data_addr(u32 addr
)
490 return (addr
>= IWLAGN_RTC_DATA_LOWER_BOUND
) &&
491 (addr
< IWLAGN_RTC_DATA_UPPER_BOUND
);
494 int iwlagn_send_tx_power(struct iwl_priv
*priv
)
496 struct iwlagn_tx_power_dbm_cmd tx_power_cmd
;
499 /* half dBm need to multiply */
500 tx_power_cmd
.global_lmt
= (s8
)(2 * priv
->tx_power_user_lmt
);
502 if (priv
->tx_power_lmt_in_half_dbm
&&
503 priv
->tx_power_lmt_in_half_dbm
< tx_power_cmd
.global_lmt
) {
505 * For the newer devices which using enhanced/extend tx power
506 * table in EEPROM, the format is in half dBm. driver need to
507 * convert to dBm format before report to mac80211.
508 * By doing so, there is a possibility of 1/2 dBm resolution
509 * lost. driver will perform "round-up" operation before
510 * reporting, but it will cause 1/2 dBm tx power over the
511 * regulatory limit. Perform the checking here, if the
512 * "tx_power_user_lmt" is higher than EEPROM value (in
513 * half-dBm format), lower the tx power based on EEPROM
515 tx_power_cmd
.global_lmt
= priv
->tx_power_lmt_in_half_dbm
;
517 tx_power_cmd
.flags
= IWLAGN_TX_POWER_NO_CLOSED
;
518 tx_power_cmd
.srv_chan_lmt
= IWLAGN_TX_POWER_AUTO
;
520 if (IWL_UCODE_API(priv
->ucode_ver
) == 1)
521 tx_ant_cfg_cmd
= REPLY_TX_POWER_DBM_CMD_V1
;
523 tx_ant_cfg_cmd
= REPLY_TX_POWER_DBM_CMD
;
525 return iwl_send_cmd_pdu_async(priv
, tx_ant_cfg_cmd
,
526 sizeof(tx_power_cmd
), &tx_power_cmd
,
530 void iwlagn_temperature(struct iwl_priv
*priv
)
532 /* store temperature from statistics (in Celsius) */
534 le32_to_cpu(priv
->_agn
.statistics
.general
.common
.temperature
);
535 iwl_tt_handler(priv
);
538 u16
iwlagn_eeprom_calib_version(struct iwl_priv
*priv
)
540 struct iwl_eeprom_calib_hdr
{
546 hdr
= (struct iwl_eeprom_calib_hdr
*)iwl_eeprom_query_addr(priv
,
555 static u32
eeprom_indirect_address(const struct iwl_priv
*priv
, u32 address
)
559 if ((address
& INDIRECT_ADDRESS
) == 0)
562 switch (address
& INDIRECT_TYPE_MSK
) {
564 offset
= iwl_eeprom_query16(priv
, EEPROM_LINK_HOST
);
566 case INDIRECT_GENERAL
:
567 offset
= iwl_eeprom_query16(priv
, EEPROM_LINK_GENERAL
);
569 case INDIRECT_REGULATORY
:
570 offset
= iwl_eeprom_query16(priv
, EEPROM_LINK_REGULATORY
);
572 case INDIRECT_CALIBRATION
:
573 offset
= iwl_eeprom_query16(priv
, EEPROM_LINK_CALIBRATION
);
575 case INDIRECT_PROCESS_ADJST
:
576 offset
= iwl_eeprom_query16(priv
, EEPROM_LINK_PROCESS_ADJST
);
578 case INDIRECT_OTHERS
:
579 offset
= iwl_eeprom_query16(priv
, EEPROM_LINK_OTHERS
);
582 IWL_ERR(priv
, "illegal indirect type: 0x%X\n",
583 address
& INDIRECT_TYPE_MSK
);
587 /* translate the offset from words to byte */
588 return (address
& ADDRESS_MSK
) + (offset
<< 1);
591 const u8
*iwlagn_eeprom_query_addr(const struct iwl_priv
*priv
,
594 u32 address
= eeprom_indirect_address(priv
, offset
);
595 BUG_ON(address
>= priv
->cfg
->base_params
->eeprom_size
);
596 return &priv
->eeprom
[address
];
599 struct iwl_mod_params iwlagn_mod_params
= {
602 /* the rest are 0 by default */
605 void iwlagn_rx_queue_reset(struct iwl_priv
*priv
, struct iwl_rx_queue
*rxq
)
609 spin_lock_irqsave(&rxq
->lock
, flags
);
610 INIT_LIST_HEAD(&rxq
->rx_free
);
611 INIT_LIST_HEAD(&rxq
->rx_used
);
612 /* Fill the rx_used queue with _all_ of the Rx buffers */
613 for (i
= 0; i
< RX_FREE_BUFFERS
+ RX_QUEUE_SIZE
; i
++) {
614 /* In the reset function, these buffers may have been allocated
615 * to an SKB, so we need to unmap and free potential storage */
616 if (rxq
->pool
[i
].page
!= NULL
) {
617 pci_unmap_page(priv
->pci_dev
, rxq
->pool
[i
].page_dma
,
618 PAGE_SIZE
<< priv
->hw_params
.rx_page_order
,
620 __iwl_free_pages(priv
, rxq
->pool
[i
].page
);
621 rxq
->pool
[i
].page
= NULL
;
623 list_add_tail(&rxq
->pool
[i
].list
, &rxq
->rx_used
);
626 for (i
= 0; i
< RX_QUEUE_SIZE
; i
++)
627 rxq
->queue
[i
] = NULL
;
629 /* Set us so that we have processed and used all buffers, but have
630 * not restocked the Rx queue with fresh buffers */
631 rxq
->read
= rxq
->write
= 0;
632 rxq
->write_actual
= 0;
634 spin_unlock_irqrestore(&rxq
->lock
, flags
);
637 int iwlagn_rx_init(struct iwl_priv
*priv
, struct iwl_rx_queue
*rxq
)
640 const u32 rfdnlog
= RX_QUEUE_SIZE_LOG
; /* 256 RBDs */
641 u32 rb_timeout
= 0; /* FIXME: RX_RB_TIMEOUT for all devices? */
643 if (!priv
->cfg
->base_params
->use_isr_legacy
)
644 rb_timeout
= RX_RB_TIMEOUT
;
646 if (priv
->cfg
->mod_params
->amsdu_size_8K
)
647 rb_size
= FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K
;
649 rb_size
= FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K
;
652 iwl_write_direct32(priv
, FH_MEM_RCSR_CHNL0_CONFIG_REG
, 0);
654 /* Reset driver's Rx queue write index */
655 iwl_write_direct32(priv
, FH_RSCSR_CHNL0_RBDCB_WPTR_REG
, 0);
657 /* Tell device where to find RBD circular buffer in DRAM */
658 iwl_write_direct32(priv
, FH_RSCSR_CHNL0_RBDCB_BASE_REG
,
659 (u32
)(rxq
->bd_dma
>> 8));
661 /* Tell device where in DRAM to update its Rx status */
662 iwl_write_direct32(priv
, FH_RSCSR_CHNL0_STTS_WPTR_REG
,
663 rxq
->rb_stts_dma
>> 4);
666 * FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY is set because of HW bug in
667 * the credit mechanism in 5000 HW RX FIFO
668 * Direct rx interrupts to hosts
669 * Rx buffer size 4 or 8k
673 iwl_write_direct32(priv
, FH_MEM_RCSR_CHNL0_CONFIG_REG
,
674 FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL
|
675 FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY
|
676 FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL
|
677 FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK
|
679 (rb_timeout
<< FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS
)|
680 (rfdnlog
<< FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS
));
682 /* Set interrupt coalescing timer to default (2048 usecs) */
683 iwl_write8(priv
, CSR_INT_COALESCING
, IWL_HOST_INT_TIMEOUT_DEF
);
688 static void iwlagn_set_pwr_vmain(struct iwl_priv
*priv
)
691 * (for documentation purposes)
692 * to set power to V_AUX, do:
694 if (pci_pme_capable(priv->pci_dev, PCI_D3cold))
695 iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
696 APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
697 ~APMG_PS_CTRL_MSK_PWR_SRC);
700 iwl_set_bits_mask_prph(priv
, APMG_PS_CTRL_REG
,
701 APMG_PS_CTRL_VAL_PWR_SRC_VMAIN
,
702 ~APMG_PS_CTRL_MSK_PWR_SRC
);
705 int iwlagn_hw_nic_init(struct iwl_priv
*priv
)
708 struct iwl_rx_queue
*rxq
= &priv
->rxq
;
712 spin_lock_irqsave(&priv
->lock
, flags
);
713 priv
->cfg
->ops
->lib
->apm_ops
.init(priv
);
715 /* Set interrupt coalescing calibration timer to default (512 usecs) */
716 iwl_write8(priv
, CSR_INT_COALESCING
, IWL_HOST_INT_CALIB_TIMEOUT_DEF
);
718 spin_unlock_irqrestore(&priv
->lock
, flags
);
720 iwlagn_set_pwr_vmain(priv
);
722 priv
->cfg
->ops
->lib
->apm_ops
.config(priv
);
724 /* Allocate the RX queue, or reset if it is already allocated */
726 ret
= iwl_rx_queue_alloc(priv
);
728 IWL_ERR(priv
, "Unable to initialize Rx queue\n");
732 iwlagn_rx_queue_reset(priv
, rxq
);
734 iwlagn_rx_replenish(priv
);
736 iwlagn_rx_init(priv
, rxq
);
738 spin_lock_irqsave(&priv
->lock
, flags
);
740 rxq
->need_update
= 1;
741 iwl_rx_queue_update_write_ptr(priv
, rxq
);
743 spin_unlock_irqrestore(&priv
->lock
, flags
);
745 /* Allocate or reset and init all Tx and Command queues */
747 ret
= iwlagn_txq_ctx_alloc(priv
);
751 iwlagn_txq_ctx_reset(priv
);
753 set_bit(STATUS_INIT
, &priv
->status
);
759 * iwlagn_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
761 static inline __le32
iwlagn_dma_addr2rbd_ptr(struct iwl_priv
*priv
,
764 return cpu_to_le32((u32
)(dma_addr
>> 8));
768 * iwlagn_rx_queue_restock - refill RX queue from pre-allocated pool
770 * If there are slots in the RX queue that need to be restocked,
771 * and we have free pre-allocated buffers, fill the ranks as much
772 * as we can, pulling from rx_free.
774 * This moves the 'write' index forward to catch up with 'processed', and
775 * also updates the memory address in the firmware to reference the new
778 void iwlagn_rx_queue_restock(struct iwl_priv
*priv
)
780 struct iwl_rx_queue
*rxq
= &priv
->rxq
;
781 struct list_head
*element
;
782 struct iwl_rx_mem_buffer
*rxb
;
785 spin_lock_irqsave(&rxq
->lock
, flags
);
786 while ((iwl_rx_queue_space(rxq
) > 0) && (rxq
->free_count
)) {
787 /* The overwritten rxb must be a used one */
788 rxb
= rxq
->queue
[rxq
->write
];
789 BUG_ON(rxb
&& rxb
->page
);
791 /* Get next free Rx buffer, remove from free list */
792 element
= rxq
->rx_free
.next
;
793 rxb
= list_entry(element
, struct iwl_rx_mem_buffer
, list
);
796 /* Point to Rx buffer via next RBD in circular buffer */
797 rxq
->bd
[rxq
->write
] = iwlagn_dma_addr2rbd_ptr(priv
,
799 rxq
->queue
[rxq
->write
] = rxb
;
800 rxq
->write
= (rxq
->write
+ 1) & RX_QUEUE_MASK
;
803 spin_unlock_irqrestore(&rxq
->lock
, flags
);
804 /* If the pre-allocated buffer pool is dropping low, schedule to
806 if (rxq
->free_count
<= RX_LOW_WATERMARK
)
807 queue_work(priv
->workqueue
, &priv
->rx_replenish
);
810 /* If we've added more space for the firmware to place data, tell it.
811 * Increment device's write pointer in multiples of 8. */
812 if (rxq
->write_actual
!= (rxq
->write
& ~0x7)) {
813 spin_lock_irqsave(&rxq
->lock
, flags
);
814 rxq
->need_update
= 1;
815 spin_unlock_irqrestore(&rxq
->lock
, flags
);
816 iwl_rx_queue_update_write_ptr(priv
, rxq
);
821 * iwlagn_rx_replenish - Move all used packet from rx_used to rx_free
823 * When moving to rx_free an SKB is allocated for the slot.
825 * Also restock the Rx queue via iwl_rx_queue_restock.
826 * This is called as a scheduled work item (except for during initialization)
828 void iwlagn_rx_allocate(struct iwl_priv
*priv
, gfp_t priority
)
830 struct iwl_rx_queue
*rxq
= &priv
->rxq
;
831 struct list_head
*element
;
832 struct iwl_rx_mem_buffer
*rxb
;
835 gfp_t gfp_mask
= priority
;
838 spin_lock_irqsave(&rxq
->lock
, flags
);
839 if (list_empty(&rxq
->rx_used
)) {
840 spin_unlock_irqrestore(&rxq
->lock
, flags
);
843 spin_unlock_irqrestore(&rxq
->lock
, flags
);
845 if (rxq
->free_count
> RX_LOW_WATERMARK
)
846 gfp_mask
|= __GFP_NOWARN
;
848 if (priv
->hw_params
.rx_page_order
> 0)
849 gfp_mask
|= __GFP_COMP
;
851 /* Alloc a new receive buffer */
852 page
= alloc_pages(gfp_mask
, priv
->hw_params
.rx_page_order
);
855 IWL_DEBUG_INFO(priv
, "alloc_pages failed, "
857 priv
->hw_params
.rx_page_order
);
859 if ((rxq
->free_count
<= RX_LOW_WATERMARK
) &&
861 IWL_CRIT(priv
, "Failed to alloc_pages with %s. Only %u free buffers remaining.\n",
862 priority
== GFP_ATOMIC
? "GFP_ATOMIC" : "GFP_KERNEL",
864 /* We don't reschedule replenish work here -- we will
865 * call the restock method and if it still needs
866 * more buffers it will schedule replenish */
870 spin_lock_irqsave(&rxq
->lock
, flags
);
872 if (list_empty(&rxq
->rx_used
)) {
873 spin_unlock_irqrestore(&rxq
->lock
, flags
);
874 __free_pages(page
, priv
->hw_params
.rx_page_order
);
877 element
= rxq
->rx_used
.next
;
878 rxb
= list_entry(element
, struct iwl_rx_mem_buffer
, list
);
881 spin_unlock_irqrestore(&rxq
->lock
, flags
);
885 /* Get physical address of the RB */
886 rxb
->page_dma
= pci_map_page(priv
->pci_dev
, page
, 0,
887 PAGE_SIZE
<< priv
->hw_params
.rx_page_order
,
889 /* dma address must be no more than 36 bits */
890 BUG_ON(rxb
->page_dma
& ~DMA_BIT_MASK(36));
891 /* and also 256 byte aligned! */
892 BUG_ON(rxb
->page_dma
& DMA_BIT_MASK(8));
894 spin_lock_irqsave(&rxq
->lock
, flags
);
896 list_add_tail(&rxb
->list
, &rxq
->rx_free
);
898 priv
->alloc_rxb_page
++;
900 spin_unlock_irqrestore(&rxq
->lock
, flags
);
904 void iwlagn_rx_replenish(struct iwl_priv
*priv
)
908 iwlagn_rx_allocate(priv
, GFP_KERNEL
);
910 spin_lock_irqsave(&priv
->lock
, flags
);
911 iwlagn_rx_queue_restock(priv
);
912 spin_unlock_irqrestore(&priv
->lock
, flags
);
915 void iwlagn_rx_replenish_now(struct iwl_priv
*priv
)
917 iwlagn_rx_allocate(priv
, GFP_ATOMIC
);
919 iwlagn_rx_queue_restock(priv
);
922 /* Assumes that the skb field of the buffers in 'pool' is kept accurate.
923 * If an SKB has been detached, the POOL needs to have its SKB set to NULL
924 * This free routine walks the list of POOL entries and if SKB is set to
925 * non NULL it is unmapped and freed
927 void iwlagn_rx_queue_free(struct iwl_priv
*priv
, struct iwl_rx_queue
*rxq
)
930 for (i
= 0; i
< RX_QUEUE_SIZE
+ RX_FREE_BUFFERS
; i
++) {
931 if (rxq
->pool
[i
].page
!= NULL
) {
932 pci_unmap_page(priv
->pci_dev
, rxq
->pool
[i
].page_dma
,
933 PAGE_SIZE
<< priv
->hw_params
.rx_page_order
,
935 __iwl_free_pages(priv
, rxq
->pool
[i
].page
);
936 rxq
->pool
[i
].page
= NULL
;
940 dma_free_coherent(&priv
->pci_dev
->dev
, 4 * RX_QUEUE_SIZE
, rxq
->bd
,
942 dma_free_coherent(&priv
->pci_dev
->dev
, sizeof(struct iwl_rb_status
),
943 rxq
->rb_stts
, rxq
->rb_stts_dma
);
948 int iwlagn_rxq_stop(struct iwl_priv
*priv
)
952 iwl_write_direct32(priv
, FH_MEM_RCSR_CHNL0_CONFIG_REG
, 0);
953 iwl_poll_direct_bit(priv
, FH_MEM_RSSR_RX_STATUS_REG
,
954 FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE
, 1000);
959 int iwlagn_hwrate_to_mac80211_idx(u32 rate_n_flags
, enum ieee80211_band band
)
964 /* HT rate format: mac80211 wants an MCS number, which is just LSB */
965 if (rate_n_flags
& RATE_MCS_HT_MSK
) {
966 idx
= (rate_n_flags
& 0xff);
968 /* Legacy rate format, search for match in table */
970 if (band
== IEEE80211_BAND_5GHZ
)
971 band_offset
= IWL_FIRST_OFDM_RATE
;
972 for (idx
= band_offset
; idx
< IWL_RATE_COUNT_LEGACY
; idx
++)
973 if (iwl_rates
[idx
].plcp
== (rate_n_flags
& 0xFF))
974 return idx
- band_offset
;
980 /* Calc max signal level (dBm) among 3 possible receivers */
981 static inline int iwlagn_calc_rssi(struct iwl_priv
*priv
,
982 struct iwl_rx_phy_res
*rx_resp
)
984 return priv
->cfg
->ops
->utils
->calc_rssi(priv
, rx_resp
);
987 static u32
iwlagn_translate_rx_status(struct iwl_priv
*priv
, u32 decrypt_in
)
991 if ((decrypt_in
& RX_RES_STATUS_STATION_FOUND
) ==
992 RX_RES_STATUS_STATION_FOUND
)
993 decrypt_out
|= (RX_RES_STATUS_STATION_FOUND
|
994 RX_RES_STATUS_NO_STATION_INFO_MISMATCH
);
996 decrypt_out
|= (decrypt_in
& RX_RES_STATUS_SEC_TYPE_MSK
);
998 /* packet was not encrypted */
999 if ((decrypt_in
& RX_RES_STATUS_SEC_TYPE_MSK
) ==
1000 RX_RES_STATUS_SEC_TYPE_NONE
)
1003 /* packet was encrypted with unknown alg */
1004 if ((decrypt_in
& RX_RES_STATUS_SEC_TYPE_MSK
) ==
1005 RX_RES_STATUS_SEC_TYPE_ERR
)
1008 /* decryption was not done in HW */
1009 if ((decrypt_in
& RX_MPDU_RES_STATUS_DEC_DONE_MSK
) !=
1010 RX_MPDU_RES_STATUS_DEC_DONE_MSK
)
1013 switch (decrypt_in
& RX_RES_STATUS_SEC_TYPE_MSK
) {
1015 case RX_RES_STATUS_SEC_TYPE_CCMP
:
1016 /* alg is CCM: check MIC only */
1017 if (!(decrypt_in
& RX_MPDU_RES_STATUS_MIC_OK
))
1019 decrypt_out
|= RX_RES_STATUS_BAD_ICV_MIC
;
1021 decrypt_out
|= RX_RES_STATUS_DECRYPT_OK
;
1025 case RX_RES_STATUS_SEC_TYPE_TKIP
:
1026 if (!(decrypt_in
& RX_MPDU_RES_STATUS_TTAK_OK
)) {
1028 decrypt_out
|= RX_RES_STATUS_BAD_KEY_TTAK
;
1031 /* fall through if TTAK OK */
1033 if (!(decrypt_in
& RX_MPDU_RES_STATUS_ICV_OK
))
1034 decrypt_out
|= RX_RES_STATUS_BAD_ICV_MIC
;
1036 decrypt_out
|= RX_RES_STATUS_DECRYPT_OK
;
1040 IWL_DEBUG_RX(priv
, "decrypt_in:0x%x decrypt_out = 0x%x\n",
1041 decrypt_in
, decrypt_out
);
1046 static void iwlagn_pass_packet_to_mac80211(struct iwl_priv
*priv
,
1047 struct ieee80211_hdr
*hdr
,
1050 struct iwl_rx_mem_buffer
*rxb
,
1051 struct ieee80211_rx_status
*stats
)
1053 struct sk_buff
*skb
;
1054 __le16 fc
= hdr
->frame_control
;
1056 /* We only process data packets if the interface is open */
1057 if (unlikely(!priv
->is_open
)) {
1058 IWL_DEBUG_DROP_LIMIT(priv
,
1059 "Dropping packet while interface is not open.\n");
1063 /* In case of HW accelerated crypto and bad decryption, drop */
1064 if (!priv
->cfg
->mod_params
->sw_crypto
&&
1065 iwl_set_decrypted_flag(priv
, hdr
, ampdu_status
, stats
))
1068 skb
= dev_alloc_skb(128);
1070 IWL_ERR(priv
, "dev_alloc_skb failed\n");
1074 skb_add_rx_frag(skb
, 0, rxb
->page
, (void *)hdr
- rxb_addr(rxb
), len
);
1076 iwl_update_stats(priv
, false, fc
, len
);
1077 memcpy(IEEE80211_SKB_RXCB(skb
), stats
, sizeof(*stats
));
1079 ieee80211_rx(priv
->hw
, skb
);
1080 priv
->alloc_rxb_page
--;
1084 /* Called for REPLY_RX (legacy ABG frames), or
1085 * REPLY_RX_MPDU_CMD (HT high-throughput N frames). */
1086 void iwlagn_rx_reply_rx(struct iwl_priv
*priv
,
1087 struct iwl_rx_mem_buffer
*rxb
)
1089 struct ieee80211_hdr
*header
;
1090 struct ieee80211_rx_status rx_status
;
1091 struct iwl_rx_packet
*pkt
= rxb_addr(rxb
);
1092 struct iwl_rx_phy_res
*phy_res
;
1093 __le32 rx_pkt_status
;
1094 struct iwl_rx_mpdu_res_start
*amsdu
;
1100 * REPLY_RX and REPLY_RX_MPDU_CMD are handled differently.
1101 * REPLY_RX: physical layer info is in this buffer
1102 * REPLY_RX_MPDU_CMD: physical layer info was sent in separate
1103 * command and cached in priv->last_phy_res
1105 * Here we set up local variables depending on which command is
1108 if (pkt
->hdr
.cmd
== REPLY_RX
) {
1109 phy_res
= (struct iwl_rx_phy_res
*)pkt
->u
.raw
;
1110 header
= (struct ieee80211_hdr
*)(pkt
->u
.raw
+ sizeof(*phy_res
)
1111 + phy_res
->cfg_phy_cnt
);
1113 len
= le16_to_cpu(phy_res
->byte_count
);
1114 rx_pkt_status
= *(__le32
*)(pkt
->u
.raw
+ sizeof(*phy_res
) +
1115 phy_res
->cfg_phy_cnt
+ len
);
1116 ampdu_status
= le32_to_cpu(rx_pkt_status
);
1118 if (!priv
->_agn
.last_phy_res_valid
) {
1119 IWL_ERR(priv
, "MPDU frame without cached PHY data\n");
1122 phy_res
= &priv
->_agn
.last_phy_res
;
1123 amsdu
= (struct iwl_rx_mpdu_res_start
*)pkt
->u
.raw
;
1124 header
= (struct ieee80211_hdr
*)(pkt
->u
.raw
+ sizeof(*amsdu
));
1125 len
= le16_to_cpu(amsdu
->byte_count
);
1126 rx_pkt_status
= *(__le32
*)(pkt
->u
.raw
+ sizeof(*amsdu
) + len
);
1127 ampdu_status
= iwlagn_translate_rx_status(priv
,
1128 le32_to_cpu(rx_pkt_status
));
1131 if ((unlikely(phy_res
->cfg_phy_cnt
> 20))) {
1132 IWL_DEBUG_DROP(priv
, "dsp size out of range [0,20]: %d/n",
1133 phy_res
->cfg_phy_cnt
);
1137 if (!(rx_pkt_status
& RX_RES_STATUS_NO_CRC32_ERROR
) ||
1138 !(rx_pkt_status
& RX_RES_STATUS_NO_RXE_OVERFLOW
)) {
1139 IWL_DEBUG_RX(priv
, "Bad CRC or FIFO: 0x%08X.\n",
1140 le32_to_cpu(rx_pkt_status
));
1144 /* This will be used in several places later */
1145 rate_n_flags
= le32_to_cpu(phy_res
->rate_n_flags
);
1147 /* rx_status carries information about the packet to mac80211 */
1148 rx_status
.mactime
= le64_to_cpu(phy_res
->timestamp
);
1150 ieee80211_channel_to_frequency(le16_to_cpu(phy_res
->channel
));
1151 rx_status
.band
= (phy_res
->phy_flags
& RX_RES_PHY_FLAGS_BAND_24_MSK
) ?
1152 IEEE80211_BAND_2GHZ
: IEEE80211_BAND_5GHZ
;
1153 rx_status
.rate_idx
=
1154 iwlagn_hwrate_to_mac80211_idx(rate_n_flags
, rx_status
.band
);
1157 /* TSF isn't reliable. In order to allow smooth user experience,
1158 * this W/A doesn't propagate it to the mac80211 */
1159 /*rx_status.flag |= RX_FLAG_TSFT;*/
1161 priv
->ucode_beacon_time
= le32_to_cpu(phy_res
->beacon_time_stamp
);
1163 /* Find max signal strength (dBm) among 3 antenna/receiver chains */
1164 rx_status
.signal
= iwlagn_calc_rssi(priv
, phy_res
);
1166 iwl_dbg_log_rx_data_frame(priv
, len
, header
);
1167 IWL_DEBUG_STATS_LIMIT(priv
, "Rssi %d, TSF %llu\n",
1168 rx_status
.signal
, (unsigned long long)rx_status
.mactime
);
1173 * It seems that the antenna field in the phy flags value
1174 * is actually a bit field. This is undefined by radiotap,
1175 * it wants an actual antenna number but I always get "7"
1176 * for most legacy frames I receive indicating that the
1177 * same frame was received on all three RX chains.
1179 * I think this field should be removed in favor of a
1180 * new 802.11n radiotap field "RX chains" that is defined
1184 (le16_to_cpu(phy_res
->phy_flags
) & RX_RES_PHY_FLAGS_ANTENNA_MSK
)
1185 >> RX_RES_PHY_FLAGS_ANTENNA_POS
;
1187 /* set the preamble flag if appropriate */
1188 if (phy_res
->phy_flags
& RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK
)
1189 rx_status
.flag
|= RX_FLAG_SHORTPRE
;
1191 /* Set up the HT phy flags */
1192 if (rate_n_flags
& RATE_MCS_HT_MSK
)
1193 rx_status
.flag
|= RX_FLAG_HT
;
1194 if (rate_n_flags
& RATE_MCS_HT40_MSK
)
1195 rx_status
.flag
|= RX_FLAG_40MHZ
;
1196 if (rate_n_flags
& RATE_MCS_SGI_MSK
)
1197 rx_status
.flag
|= RX_FLAG_SHORT_GI
;
1199 iwlagn_pass_packet_to_mac80211(priv
, header
, len
, ampdu_status
,
1203 /* Cache phy data (Rx signal strength, etc) for HT frame (REPLY_RX_PHY_CMD).
1204 * This will be used later in iwl_rx_reply_rx() for REPLY_RX_MPDU_CMD. */
1205 void iwlagn_rx_reply_rx_phy(struct iwl_priv
*priv
,
1206 struct iwl_rx_mem_buffer
*rxb
)
1208 struct iwl_rx_packet
*pkt
= rxb_addr(rxb
);
1209 priv
->_agn
.last_phy_res_valid
= true;
1210 memcpy(&priv
->_agn
.last_phy_res
, pkt
->u
.raw
,
1211 sizeof(struct iwl_rx_phy_res
));
1214 static int iwl_get_single_channel_for_scan(struct iwl_priv
*priv
,
1215 struct ieee80211_vif
*vif
,
1216 enum ieee80211_band band
,
1217 struct iwl_scan_channel
*scan_ch
)
1219 const struct ieee80211_supported_band
*sband
;
1220 u16 passive_dwell
= 0;
1221 u16 active_dwell
= 0;
1225 sband
= iwl_get_hw_mode(priv
, band
);
1227 IWL_ERR(priv
, "invalid band\n");
1231 active_dwell
= iwl_get_active_dwell_time(priv
, band
, 0);
1232 passive_dwell
= iwl_get_passive_dwell_time(priv
, band
, vif
);
1234 if (passive_dwell
<= active_dwell
)
1235 passive_dwell
= active_dwell
+ 1;
1237 channel
= iwl_get_single_channel_number(priv
, band
);
1239 scan_ch
->channel
= cpu_to_le16(channel
);
1240 scan_ch
->type
= SCAN_CHANNEL_TYPE_PASSIVE
;
1241 scan_ch
->active_dwell
= cpu_to_le16(active_dwell
);
1242 scan_ch
->passive_dwell
= cpu_to_le16(passive_dwell
);
1243 /* Set txpower levels to defaults */
1244 scan_ch
->dsp_atten
= 110;
1245 if (band
== IEEE80211_BAND_5GHZ
)
1246 scan_ch
->tx_gain
= ((1 << 5) | (3 << 3)) | 3;
1248 scan_ch
->tx_gain
= ((1 << 5) | (5 << 3));
1251 IWL_ERR(priv
, "no valid channel found\n");
1255 static int iwl_get_channels_for_scan(struct iwl_priv
*priv
,
1256 struct ieee80211_vif
*vif
,
1257 enum ieee80211_band band
,
1258 u8 is_active
, u8 n_probes
,
1259 struct iwl_scan_channel
*scan_ch
)
1261 struct ieee80211_channel
*chan
;
1262 const struct ieee80211_supported_band
*sband
;
1263 const struct iwl_channel_info
*ch_info
;
1264 u16 passive_dwell
= 0;
1265 u16 active_dwell
= 0;
1269 sband
= iwl_get_hw_mode(priv
, band
);
1273 active_dwell
= iwl_get_active_dwell_time(priv
, band
, n_probes
);
1274 passive_dwell
= iwl_get_passive_dwell_time(priv
, band
, vif
);
1276 if (passive_dwell
<= active_dwell
)
1277 passive_dwell
= active_dwell
+ 1;
1279 for (i
= 0, added
= 0; i
< priv
->scan_request
->n_channels
; i
++) {
1280 chan
= priv
->scan_request
->channels
[i
];
1282 if (chan
->band
!= band
)
1285 channel
= chan
->hw_value
;
1286 scan_ch
->channel
= cpu_to_le16(channel
);
1288 ch_info
= iwl_get_channel_info(priv
, band
, channel
);
1289 if (!is_channel_valid(ch_info
)) {
1290 IWL_DEBUG_SCAN(priv
, "Channel %d is INVALID for this band.\n",
1295 if (!is_active
|| is_channel_passive(ch_info
) ||
1296 (chan
->flags
& IEEE80211_CHAN_PASSIVE_SCAN
))
1297 scan_ch
->type
= SCAN_CHANNEL_TYPE_PASSIVE
;
1299 scan_ch
->type
= SCAN_CHANNEL_TYPE_ACTIVE
;
1302 scan_ch
->type
|= IWL_SCAN_PROBE_MASK(n_probes
);
1304 scan_ch
->active_dwell
= cpu_to_le16(active_dwell
);
1305 scan_ch
->passive_dwell
= cpu_to_le16(passive_dwell
);
1307 /* Set txpower levels to defaults */
1308 scan_ch
->dsp_atten
= 110;
1310 /* NOTE: if we were doing 6Mb OFDM for scans we'd use
1312 * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
1314 if (band
== IEEE80211_BAND_5GHZ
)
1315 scan_ch
->tx_gain
= ((1 << 5) | (3 << 3)) | 3;
1317 scan_ch
->tx_gain
= ((1 << 5) | (5 << 3));
1319 IWL_DEBUG_SCAN(priv
, "Scanning ch=%d prob=0x%X [%s %d]\n",
1320 channel
, le32_to_cpu(scan_ch
->type
),
1321 (scan_ch
->type
& SCAN_CHANNEL_TYPE_ACTIVE
) ?
1322 "ACTIVE" : "PASSIVE",
1323 (scan_ch
->type
& SCAN_CHANNEL_TYPE_ACTIVE
) ?
1324 active_dwell
: passive_dwell
);
1330 IWL_DEBUG_SCAN(priv
, "total channels to scan %d\n", added
);
1334 int iwlagn_request_scan(struct iwl_priv
*priv
, struct ieee80211_vif
*vif
)
1336 struct iwl_host_cmd cmd
= {
1337 .id
= REPLY_SCAN_CMD
,
1338 .len
= sizeof(struct iwl_scan_cmd
),
1339 .flags
= CMD_SIZE_HUGE
,
1341 struct iwl_scan_cmd
*scan
;
1342 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
1346 enum ieee80211_band band
;
1348 u8 rx_ant
= priv
->hw_params
.valid_rx_ant
;
1350 bool is_active
= false;
1353 u8 scan_tx_antennas
= priv
->hw_params
.valid_tx_ant
;
1356 lockdep_assert_held(&priv
->mutex
);
1359 ctx
= iwl_rxon_ctx_from_vif(vif
);
1361 if (!priv
->scan_cmd
) {
1362 priv
->scan_cmd
= kmalloc(sizeof(struct iwl_scan_cmd
) +
1363 IWL_MAX_SCAN_SIZE
, GFP_KERNEL
);
1364 if (!priv
->scan_cmd
) {
1365 IWL_DEBUG_SCAN(priv
,
1366 "fail to allocate memory for scan\n");
1370 scan
= priv
->scan_cmd
;
1371 memset(scan
, 0, sizeof(struct iwl_scan_cmd
) + IWL_MAX_SCAN_SIZE
);
1373 scan
->quiet_plcp_th
= IWL_PLCP_QUIET_THRESH
;
1374 scan
->quiet_time
= IWL_ACTIVE_QUIET_TIME
;
1376 if (iwl_is_any_associated(priv
)) {
1379 u32 suspend_time
= 100;
1380 u32 scan_suspend_time
= 100;
1381 unsigned long flags
;
1383 IWL_DEBUG_INFO(priv
, "Scanning while associated...\n");
1384 spin_lock_irqsave(&priv
->lock
, flags
);
1385 if (priv
->is_internal_short_scan
)
1388 interval
= vif
->bss_conf
.beacon_int
;
1389 spin_unlock_irqrestore(&priv
->lock
, flags
);
1391 scan
->suspend_time
= 0;
1392 scan
->max_out_time
= cpu_to_le32(200 * 1024);
1394 interval
= suspend_time
;
1396 extra
= (suspend_time
/ interval
) << 22;
1397 scan_suspend_time
= (extra
|
1398 ((suspend_time
% interval
) * 1024));
1399 scan
->suspend_time
= cpu_to_le32(scan_suspend_time
);
1400 IWL_DEBUG_SCAN(priv
, "suspend_time 0x%X beacon interval %d\n",
1401 scan_suspend_time
, interval
);
1404 if (priv
->is_internal_short_scan
) {
1405 IWL_DEBUG_SCAN(priv
, "Start internal passive scan.\n");
1406 } else if (priv
->scan_request
->n_ssids
) {
1408 IWL_DEBUG_SCAN(priv
, "Kicking off active scan\n");
1409 for (i
= 0; i
< priv
->scan_request
->n_ssids
; i
++) {
1410 /* always does wildcard anyway */
1411 if (!priv
->scan_request
->ssids
[i
].ssid_len
)
1413 scan
->direct_scan
[p
].id
= WLAN_EID_SSID
;
1414 scan
->direct_scan
[p
].len
=
1415 priv
->scan_request
->ssids
[i
].ssid_len
;
1416 memcpy(scan
->direct_scan
[p
].ssid
,
1417 priv
->scan_request
->ssids
[i
].ssid
,
1418 priv
->scan_request
->ssids
[i
].ssid_len
);
1424 IWL_DEBUG_SCAN(priv
, "Start passive scan.\n");
1426 scan
->tx_cmd
.tx_flags
= TX_CMD_FLG_SEQ_CTL_MSK
;
1427 scan
->tx_cmd
.sta_id
= ctx
->bcast_sta_id
;
1428 scan
->tx_cmd
.stop_time
.life_time
= TX_CMD_LIFE_TIME_INFINITE
;
1430 switch (priv
->scan_band
) {
1431 case IEEE80211_BAND_2GHZ
:
1432 scan
->flags
= RXON_FLG_BAND_24G_MSK
| RXON_FLG_AUTO_DETECT_MSK
;
1433 chan_mod
= le32_to_cpu(
1434 priv
->contexts
[IWL_RXON_CTX_BSS
].active
.flags
&
1435 RXON_FLG_CHANNEL_MODE_MSK
)
1436 >> RXON_FLG_CHANNEL_MODE_POS
;
1437 if (chan_mod
== CHANNEL_MODE_PURE_40
) {
1438 rate
= IWL_RATE_6M_PLCP
;
1440 rate
= IWL_RATE_1M_PLCP
;
1441 rate_flags
= RATE_MCS_CCK_MSK
;
1444 * Internal scans are passive, so we can indiscriminately set
1445 * the BT ignore flag on 2.4 GHz since it applies to TX only.
1447 if (priv
->cfg
->bt_params
&&
1448 priv
->cfg
->bt_params
->advanced_bt_coexist
)
1449 scan
->tx_cmd
.tx_flags
|= TX_CMD_FLG_IGNORE_BT
;
1450 scan
->good_CRC_th
= IWL_GOOD_CRC_TH_DISABLED
;
1452 case IEEE80211_BAND_5GHZ
:
1453 rate
= IWL_RATE_6M_PLCP
;
1455 * If active scanning is requested but a certain channel is
1456 * marked passive, we can do active scanning if we detect
1459 * There is an issue with some firmware versions that triggers
1460 * a sysassert on a "good CRC threshold" of zero (== disabled),
1461 * on a radar channel even though this means that we should NOT
1464 * The "good CRC threshold" is the number of frames that we
1465 * need to receive during our dwell time on a channel before
1466 * sending out probes -- setting this to a huge value will
1467 * mean we never reach it, but at the same time work around
1468 * the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER
1469 * here instead of IWL_GOOD_CRC_TH_DISABLED.
1471 scan
->good_CRC_th
= is_active
? IWL_GOOD_CRC_TH_DEFAULT
:
1472 IWL_GOOD_CRC_TH_NEVER
;
1475 IWL_WARN(priv
, "Invalid scan band\n");
1479 band
= priv
->scan_band
;
1481 if (priv
->cfg
->scan_rx_antennas
[band
])
1482 rx_ant
= priv
->cfg
->scan_rx_antennas
[band
];
1484 if (priv
->cfg
->scan_tx_antennas
[band
])
1485 scan_tx_antennas
= priv
->cfg
->scan_tx_antennas
[band
];
1487 if (priv
->cfg
->bt_params
&&
1488 priv
->cfg
->bt_params
->advanced_bt_coexist
&&
1489 priv
->bt_full_concurrent
) {
1490 /* operated as 1x1 in full concurrency mode */
1491 scan_tx_antennas
= first_antenna(
1492 priv
->cfg
->scan_tx_antennas
[band
]);
1495 priv
->scan_tx_ant
[band
] = iwl_toggle_tx_ant(priv
, priv
->scan_tx_ant
[band
],
1497 rate_flags
|= iwl_ant_idx_to_flags(priv
->scan_tx_ant
[band
]);
1498 scan
->tx_cmd
.rate_n_flags
= iwl_hw_set_rate_n_flags(rate
, rate_flags
);
1500 /* In power save mode use one chain, otherwise use all chains */
1501 if (test_bit(STATUS_POWER_PMI
, &priv
->status
)) {
1502 /* rx_ant has been set to all valid chains previously */
1503 active_chains
= rx_ant
&
1504 ((u8
)(priv
->chain_noise_data
.active_chains
));
1506 active_chains
= rx_ant
;
1508 IWL_DEBUG_SCAN(priv
, "chain_noise_data.active_chains: %u\n",
1509 priv
->chain_noise_data
.active_chains
);
1511 rx_ant
= first_antenna(active_chains
);
1513 if (priv
->cfg
->bt_params
&&
1514 priv
->cfg
->bt_params
->advanced_bt_coexist
&&
1515 priv
->bt_full_concurrent
) {
1516 /* operated as 1x1 in full concurrency mode */
1517 rx_ant
= first_antenna(rx_ant
);
1520 /* MIMO is not used here, but value is required */
1521 rx_chain
|= priv
->hw_params
.valid_rx_ant
<< RXON_RX_CHAIN_VALID_POS
;
1522 rx_chain
|= rx_ant
<< RXON_RX_CHAIN_FORCE_MIMO_SEL_POS
;
1523 rx_chain
|= rx_ant
<< RXON_RX_CHAIN_FORCE_SEL_POS
;
1524 rx_chain
|= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS
;
1525 scan
->rx_chain
= cpu_to_le16(rx_chain
);
1526 if (!priv
->is_internal_short_scan
) {
1527 cmd_len
= iwl_fill_probe_req(priv
,
1528 (struct ieee80211_mgmt
*)scan
->data
,
1530 priv
->scan_request
->ie
,
1531 priv
->scan_request
->ie_len
,
1532 IWL_MAX_SCAN_SIZE
- sizeof(*scan
));
1534 /* use bcast addr, will not be transmitted but must be valid */
1535 cmd_len
= iwl_fill_probe_req(priv
,
1536 (struct ieee80211_mgmt
*)scan
->data
,
1537 iwl_bcast_addr
, NULL
, 0,
1538 IWL_MAX_SCAN_SIZE
- sizeof(*scan
));
1541 scan
->tx_cmd
.len
= cpu_to_le16(cmd_len
);
1543 scan
->filter_flags
|= (RXON_FILTER_ACCEPT_GRP_MSK
|
1544 RXON_FILTER_BCON_AWARE_MSK
);
1546 if (priv
->is_internal_short_scan
) {
1547 scan
->channel_count
=
1548 iwl_get_single_channel_for_scan(priv
, vif
, band
,
1549 (void *)&scan
->data
[le16_to_cpu(
1550 scan
->tx_cmd
.len
)]);
1552 scan
->channel_count
=
1553 iwl_get_channels_for_scan(priv
, vif
, band
,
1554 is_active
, n_probes
,
1555 (void *)&scan
->data
[le16_to_cpu(
1556 scan
->tx_cmd
.len
)]);
1558 if (scan
->channel_count
== 0) {
1559 IWL_DEBUG_SCAN(priv
, "channel count %d\n", scan
->channel_count
);
1563 cmd
.len
+= le16_to_cpu(scan
->tx_cmd
.len
) +
1564 scan
->channel_count
* sizeof(struct iwl_scan_channel
);
1566 scan
->len
= cpu_to_le16(cmd
.len
);
1568 if (priv
->cfg
->ops
->hcmd
->set_pan_params
) {
1569 ret
= priv
->cfg
->ops
->hcmd
->set_pan_params(priv
);
1574 set_bit(STATUS_SCAN_HW
, &priv
->status
);
1575 ret
= iwl_send_cmd_sync(priv
, &cmd
);
1577 clear_bit(STATUS_SCAN_HW
, &priv
->status
);
1578 if (priv
->cfg
->ops
->hcmd
->set_pan_params
)
1579 priv
->cfg
->ops
->hcmd
->set_pan_params(priv
);
1585 void iwlagn_post_scan(struct iwl_priv
*priv
)
1587 struct iwl_rxon_context
*ctx
;
1590 * Since setting the RXON may have been deferred while
1591 * performing the scan, fire one off if needed
1593 for_each_context(priv
, ctx
)
1594 if (memcmp(&ctx
->staging
, &ctx
->active
, sizeof(ctx
->staging
)))
1595 iwlagn_commit_rxon(priv
, ctx
);
1597 if (priv
->cfg
->ops
->hcmd
->set_pan_params
)
1598 priv
->cfg
->ops
->hcmd
->set_pan_params(priv
);
1601 int iwlagn_manage_ibss_station(struct iwl_priv
*priv
,
1602 struct ieee80211_vif
*vif
, bool add
)
1604 struct iwl_vif_priv
*vif_priv
= (void *)vif
->drv_priv
;
1607 return iwlagn_add_bssid_station(priv
, vif_priv
->ctx
,
1608 vif
->bss_conf
.bssid
,
1609 &vif_priv
->ibss_bssid_sta_id
);
1610 return iwl_remove_station(priv
, vif_priv
->ibss_bssid_sta_id
,
1611 vif
->bss_conf
.bssid
);
1614 void iwl_free_tfds_in_queue(struct iwl_priv
*priv
,
1615 int sta_id
, int tid
, int freed
)
1617 lockdep_assert_held(&priv
->sta_lock
);
1619 if (priv
->stations
[sta_id
].tid
[tid
].tfds_in_queue
>= freed
)
1620 priv
->stations
[sta_id
].tid
[tid
].tfds_in_queue
-= freed
;
1622 IWL_DEBUG_TX(priv
, "free more than tfds_in_queue (%u:%d)\n",
1623 priv
->stations
[sta_id
].tid
[tid
].tfds_in_queue
,
1625 priv
->stations
[sta_id
].tid
[tid
].tfds_in_queue
= 0;
1629 #define IWL_FLUSH_WAIT_MS 2000
1631 int iwlagn_wait_tx_queue_empty(struct iwl_priv
*priv
)
1633 struct iwl_tx_queue
*txq
;
1634 struct iwl_queue
*q
;
1636 unsigned long now
= jiffies
;
1639 /* waiting for all the tx frames complete might take a while */
1640 for (cnt
= 0; cnt
< priv
->hw_params
.max_txq_num
; cnt
++) {
1641 if (cnt
== priv
->cmd_queue
)
1643 txq
= &priv
->txq
[cnt
];
1645 while (q
->read_ptr
!= q
->write_ptr
&& !time_after(jiffies
,
1646 now
+ msecs_to_jiffies(IWL_FLUSH_WAIT_MS
)))
1649 if (q
->read_ptr
!= q
->write_ptr
) {
1650 IWL_ERR(priv
, "fail to flush all tx fifo queues\n");
1658 #define IWL_TX_QUEUE_MSK 0xfffff
1661 * iwlagn_txfifo_flush: send REPLY_TXFIFO_FLUSH command to uCode
1664 * 1. acquire mutex before calling
1665 * 2. make sure rf is on and not in exit state
1667 int iwlagn_txfifo_flush(struct iwl_priv
*priv
, u16 flush_control
)
1669 struct iwl_txfifo_flush_cmd flush_cmd
;
1670 struct iwl_host_cmd cmd
= {
1671 .id
= REPLY_TXFIFO_FLUSH
,
1672 .len
= sizeof(struct iwl_txfifo_flush_cmd
),
1679 memset(&flush_cmd
, 0, sizeof(flush_cmd
));
1680 flush_cmd
.fifo_control
= IWL_TX_FIFO_VO_MSK
| IWL_TX_FIFO_VI_MSK
|
1681 IWL_TX_FIFO_BE_MSK
| IWL_TX_FIFO_BK_MSK
;
1682 if (priv
->cfg
->sku
& IWL_SKU_N
)
1683 flush_cmd
.fifo_control
|= IWL_AGG_TX_QUEUE_MSK
;
1685 IWL_DEBUG_INFO(priv
, "fifo queue control: 0X%x\n",
1686 flush_cmd
.fifo_control
);
1687 flush_cmd
.flush_control
= cpu_to_le16(flush_control
);
1689 return iwl_send_cmd(priv
, &cmd
);
1692 void iwlagn_dev_txfifo_flush(struct iwl_priv
*priv
, u16 flush_control
)
1694 mutex_lock(&priv
->mutex
);
1695 ieee80211_stop_queues(priv
->hw
);
1696 if (priv
->cfg
->ops
->lib
->txfifo_flush(priv
, IWL_DROP_ALL
)) {
1697 IWL_ERR(priv
, "flush request fail\n");
1700 IWL_DEBUG_INFO(priv
, "wait transmit/flush all frames\n");
1701 iwlagn_wait_tx_queue_empty(priv
);
1703 ieee80211_wake_queues(priv
->hw
);
1704 mutex_unlock(&priv
->mutex
);
1711 * Macros to access the lookup table.
1713 * The lookup table has 7 inputs: bt3_prio, bt3_txrx, bt_rf_act, wifi_req,
1714 * wifi_prio, wifi_txrx and wifi_sh_ant_req.
1716 * It has three outputs: WLAN_ACTIVE, WLAN_KILL and ANT_SWITCH
1718 * The format is that "registers" 8 through 11 contain the WLAN_ACTIVE bits
1719 * one after another in 32-bit registers, and "registers" 0 through 7 contain
1720 * the WLAN_KILL and ANT_SWITCH bits interleaved (in that order).
1722 * These macros encode that format.
1724 #define LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, wifi_req, wifi_prio, \
1725 wifi_txrx, wifi_sh_ant_req) \
1726 (bt3_prio | (bt3_txrx << 1) | (bt_rf_act << 2) | (wifi_req << 3) | \
1727 (wifi_prio << 4) | (wifi_txrx << 5) | (wifi_sh_ant_req << 6))
1729 #define LUT_PTA_WLAN_ACTIVE_OP(lut, op, val) \
1730 lut[8 + ((val) >> 5)] op (cpu_to_le32(BIT((val) & 0x1f)))
1731 #define LUT_TEST_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1732 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1733 (!!(LUT_PTA_WLAN_ACTIVE_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, \
1734 bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \
1736 #define LUT_SET_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1737 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1738 LUT_PTA_WLAN_ACTIVE_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, \
1739 bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \
1741 #define LUT_CLEAR_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, \
1742 wifi_req, wifi_prio, wifi_txrx, \
1744 LUT_PTA_WLAN_ACTIVE_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, \
1745 bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \
1748 #define LUT_WLAN_KILL_OP(lut, op, val) \
1749 lut[(val) >> 4] op (cpu_to_le32(BIT(((val) << 1) & 0x1e)))
1750 #define LUT_TEST_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1751 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1752 (!!(LUT_WLAN_KILL_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1753 wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))))
1754 #define LUT_SET_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1755 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1756 LUT_WLAN_KILL_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1757 wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
1758 #define LUT_CLEAR_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1759 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1760 LUT_WLAN_KILL_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1761 wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
1763 #define LUT_ANT_SWITCH_OP(lut, op, val) \
1764 lut[(val) >> 4] op (cpu_to_le32(BIT((((val) << 1) & 0x1e) + 1)))
1765 #define LUT_TEST_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1766 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1767 (!!(LUT_ANT_SWITCH_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1768 wifi_req, wifi_prio, wifi_txrx, \
1770 #define LUT_SET_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1771 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1772 LUT_ANT_SWITCH_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1773 wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
1774 #define LUT_CLEAR_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1775 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1776 LUT_ANT_SWITCH_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1777 wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
1779 static const __le32 iwlagn_def_3w_lookup
[12] = {
1780 cpu_to_le32(0xaaaaaaaa),
1781 cpu_to_le32(0xaaaaaaaa),
1782 cpu_to_le32(0xaeaaaaaa),
1783 cpu_to_le32(0xaaaaaaaa),
1784 cpu_to_le32(0xcc00ff28),
1785 cpu_to_le32(0x0000aaaa),
1786 cpu_to_le32(0xcc00aaaa),
1787 cpu_to_le32(0x0000aaaa),
1788 cpu_to_le32(0xc0004000),
1789 cpu_to_le32(0x00004000),
1790 cpu_to_le32(0xf0005000),
1791 cpu_to_le32(0xf0004000),
1794 static const __le32 iwlagn_concurrent_lookup
[12] = {
1795 cpu_to_le32(0xaaaaaaaa),
1796 cpu_to_le32(0xaaaaaaaa),
1797 cpu_to_le32(0xaaaaaaaa),
1798 cpu_to_le32(0xaaaaaaaa),
1799 cpu_to_le32(0xaaaaaaaa),
1800 cpu_to_le32(0xaaaaaaaa),
1801 cpu_to_le32(0xaaaaaaaa),
1802 cpu_to_le32(0xaaaaaaaa),
1803 cpu_to_le32(0x00000000),
1804 cpu_to_le32(0x00000000),
1805 cpu_to_le32(0x00000000),
1806 cpu_to_le32(0x00000000),
1809 void iwlagn_send_advance_bt_config(struct iwl_priv
*priv
)
1811 struct iwlagn_bt_cmd bt_cmd
= {
1812 .max_kill
= IWLAGN_BT_MAX_KILL_DEFAULT
,
1813 .bt3_timer_t7_value
= IWLAGN_BT3_T7_DEFAULT
,
1814 .bt3_prio_sample_time
= IWLAGN_BT3_PRIO_SAMPLE_DEFAULT
,
1815 .bt3_timer_t2_value
= IWLAGN_BT3_T2_DEFAULT
,
1818 BUILD_BUG_ON(sizeof(iwlagn_def_3w_lookup
) !=
1819 sizeof(bt_cmd
.bt3_lookup_table
));
1821 if (priv
->cfg
->bt_params
)
1822 bt_cmd
.prio_boost
= priv
->cfg
->bt_params
->bt_prio_boost
;
1824 bt_cmd
.prio_boost
= 0;
1825 bt_cmd
.kill_ack_mask
= priv
->kill_ack_mask
;
1826 bt_cmd
.kill_cts_mask
= priv
->kill_cts_mask
;
1827 bt_cmd
.valid
= priv
->bt_valid
;
1828 bt_cmd
.tx_prio_boost
= 0;
1829 bt_cmd
.rx_prio_boost
= 0;
1832 * Configure BT coex mode to "no coexistence" when the
1833 * user disabled BT coexistence, we have no interface
1834 * (might be in monitor mode), or the interface is in
1835 * IBSS mode (no proper uCode support for coex then).
1837 if (!bt_coex_active
|| priv
->iw_mode
== NL80211_IFTYPE_ADHOC
) {
1840 bt_cmd
.flags
= IWLAGN_BT_FLAG_COEX_MODE_3W
<<
1841 IWLAGN_BT_FLAG_COEX_MODE_SHIFT
;
1842 if (priv
->bt_ch_announce
)
1843 bt_cmd
.flags
|= IWLAGN_BT_FLAG_CHANNEL_INHIBITION
;
1844 IWL_DEBUG_INFO(priv
, "BT coex flag: 0X%x\n", bt_cmd
.flags
);
1846 if (priv
->bt_full_concurrent
)
1847 memcpy(bt_cmd
.bt3_lookup_table
, iwlagn_concurrent_lookup
,
1848 sizeof(iwlagn_concurrent_lookup
));
1850 memcpy(bt_cmd
.bt3_lookup_table
, iwlagn_def_3w_lookup
,
1851 sizeof(iwlagn_def_3w_lookup
));
1853 IWL_DEBUG_INFO(priv
, "BT coex %s in %s mode\n",
1854 bt_cmd
.flags
? "active" : "disabled",
1855 priv
->bt_full_concurrent
?
1856 "full concurrency" : "3-wire");
1858 if (iwl_send_cmd_pdu(priv
, REPLY_BT_CONFIG
, sizeof(bt_cmd
), &bt_cmd
))
1859 IWL_ERR(priv
, "failed to send BT Coex Config\n");
1862 * When we are doing a restart, need to also reconfigure BT
1863 * SCO to the device. If not doing a restart, bt_sco_active
1864 * will always be false, so there's no need to have an extra
1865 * variable to check for it.
1867 if (priv
->bt_sco_active
) {
1868 struct iwlagn_bt_sco_cmd sco_cmd
= { .flags
= 0 };
1870 if (priv
->bt_sco_active
)
1871 sco_cmd
.flags
|= IWLAGN_BT_SCO_ACTIVE
;
1872 if (iwl_send_cmd_pdu(priv
, REPLY_BT_COEX_SCO
,
1873 sizeof(sco_cmd
), &sco_cmd
))
1874 IWL_ERR(priv
, "failed to send BT SCO command\n");
1878 static void iwlagn_bt_traffic_change_work(struct work_struct
*work
)
1880 struct iwl_priv
*priv
=
1881 container_of(work
, struct iwl_priv
, bt_traffic_change_work
);
1882 struct iwl_rxon_context
*ctx
;
1883 int smps_request
= -1;
1885 IWL_DEBUG_INFO(priv
, "BT traffic load changes: %d\n",
1886 priv
->bt_traffic_load
);
1888 switch (priv
->bt_traffic_load
) {
1889 case IWL_BT_COEX_TRAFFIC_LOAD_NONE
:
1890 smps_request
= IEEE80211_SMPS_AUTOMATIC
;
1892 case IWL_BT_COEX_TRAFFIC_LOAD_LOW
:
1893 smps_request
= IEEE80211_SMPS_DYNAMIC
;
1895 case IWL_BT_COEX_TRAFFIC_LOAD_HIGH
:
1896 case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS
:
1897 smps_request
= IEEE80211_SMPS_STATIC
;
1900 IWL_ERR(priv
, "Invalid BT traffic load: %d\n",
1901 priv
->bt_traffic_load
);
1905 mutex_lock(&priv
->mutex
);
1907 if (priv
->cfg
->ops
->lib
->update_chain_flags
)
1908 priv
->cfg
->ops
->lib
->update_chain_flags(priv
);
1910 if (smps_request
!= -1) {
1911 for_each_context(priv
, ctx
) {
1912 if (ctx
->vif
&& ctx
->vif
->type
== NL80211_IFTYPE_STATION
)
1913 ieee80211_request_smps(ctx
->vif
, smps_request
);
1917 mutex_unlock(&priv
->mutex
);
1920 static void iwlagn_print_uartmsg(struct iwl_priv
*priv
,
1921 struct iwl_bt_uart_msg
*uart_msg
)
1923 IWL_DEBUG_NOTIF(priv
, "Message Type = 0x%X, SSN = 0x%X, "
1924 "Update Req = 0x%X",
1925 (BT_UART_MSG_FRAME1MSGTYPE_MSK
& uart_msg
->frame1
) >>
1926 BT_UART_MSG_FRAME1MSGTYPE_POS
,
1927 (BT_UART_MSG_FRAME1SSN_MSK
& uart_msg
->frame1
) >>
1928 BT_UART_MSG_FRAME1SSN_POS
,
1929 (BT_UART_MSG_FRAME1UPDATEREQ_MSK
& uart_msg
->frame1
) >>
1930 BT_UART_MSG_FRAME1UPDATEREQ_POS
);
1932 IWL_DEBUG_NOTIF(priv
, "Open connections = 0x%X, Traffic load = 0x%X, "
1933 "Chl_SeqN = 0x%X, In band = 0x%X",
1934 (BT_UART_MSG_FRAME2OPENCONNECTIONS_MSK
& uart_msg
->frame2
) >>
1935 BT_UART_MSG_FRAME2OPENCONNECTIONS_POS
,
1936 (BT_UART_MSG_FRAME2TRAFFICLOAD_MSK
& uart_msg
->frame2
) >>
1937 BT_UART_MSG_FRAME2TRAFFICLOAD_POS
,
1938 (BT_UART_MSG_FRAME2CHLSEQN_MSK
& uart_msg
->frame2
) >>
1939 BT_UART_MSG_FRAME2CHLSEQN_POS
,
1940 (BT_UART_MSG_FRAME2INBAND_MSK
& uart_msg
->frame2
) >>
1941 BT_UART_MSG_FRAME2INBAND_POS
);
1943 IWL_DEBUG_NOTIF(priv
, "SCO/eSCO = 0x%X, Sniff = 0x%X, A2DP = 0x%X, "
1944 "ACL = 0x%X, Master = 0x%X, OBEX = 0x%X",
1945 (BT_UART_MSG_FRAME3SCOESCO_MSK
& uart_msg
->frame3
) >>
1946 BT_UART_MSG_FRAME3SCOESCO_POS
,
1947 (BT_UART_MSG_FRAME3SNIFF_MSK
& uart_msg
->frame3
) >>
1948 BT_UART_MSG_FRAME3SNIFF_POS
,
1949 (BT_UART_MSG_FRAME3A2DP_MSK
& uart_msg
->frame3
) >>
1950 BT_UART_MSG_FRAME3A2DP_POS
,
1951 (BT_UART_MSG_FRAME3ACL_MSK
& uart_msg
->frame3
) >>
1952 BT_UART_MSG_FRAME3ACL_POS
,
1953 (BT_UART_MSG_FRAME3MASTER_MSK
& uart_msg
->frame3
) >>
1954 BT_UART_MSG_FRAME3MASTER_POS
,
1955 (BT_UART_MSG_FRAME3OBEX_MSK
& uart_msg
->frame3
) >>
1956 BT_UART_MSG_FRAME3OBEX_POS
);
1958 IWL_DEBUG_NOTIF(priv
, "Idle duration = 0x%X",
1959 (BT_UART_MSG_FRAME4IDLEDURATION_MSK
& uart_msg
->frame4
) >>
1960 BT_UART_MSG_FRAME4IDLEDURATION_POS
);
1962 IWL_DEBUG_NOTIF(priv
, "Tx Activity = 0x%X, Rx Activity = 0x%X, "
1963 "eSCO Retransmissions = 0x%X",
1964 (BT_UART_MSG_FRAME5TXACTIVITY_MSK
& uart_msg
->frame5
) >>
1965 BT_UART_MSG_FRAME5TXACTIVITY_POS
,
1966 (BT_UART_MSG_FRAME5RXACTIVITY_MSK
& uart_msg
->frame5
) >>
1967 BT_UART_MSG_FRAME5RXACTIVITY_POS
,
1968 (BT_UART_MSG_FRAME5ESCORETRANSMIT_MSK
& uart_msg
->frame5
) >>
1969 BT_UART_MSG_FRAME5ESCORETRANSMIT_POS
);
1971 IWL_DEBUG_NOTIF(priv
, "Sniff Interval = 0x%X, Discoverable = 0x%X",
1972 (BT_UART_MSG_FRAME6SNIFFINTERVAL_MSK
& uart_msg
->frame6
) >>
1973 BT_UART_MSG_FRAME6SNIFFINTERVAL_POS
,
1974 (BT_UART_MSG_FRAME6DISCOVERABLE_MSK
& uart_msg
->frame6
) >>
1975 BT_UART_MSG_FRAME6DISCOVERABLE_POS
);
1977 IWL_DEBUG_NOTIF(priv
, "Sniff Activity = 0x%X, Inquiry/Page SR Mode = "
1978 "0x%X, Connectable = 0x%X",
1979 (BT_UART_MSG_FRAME7SNIFFACTIVITY_MSK
& uart_msg
->frame7
) >>
1980 BT_UART_MSG_FRAME7SNIFFACTIVITY_POS
,
1981 (BT_UART_MSG_FRAME7INQUIRYPAGESRMODE_MSK
& uart_msg
->frame7
) >>
1982 BT_UART_MSG_FRAME7INQUIRYPAGESRMODE_POS
,
1983 (BT_UART_MSG_FRAME7CONNECTABLE_MSK
& uart_msg
->frame7
) >>
1984 BT_UART_MSG_FRAME7CONNECTABLE_POS
);
1987 static void iwlagn_set_kill_ack_msk(struct iwl_priv
*priv
,
1988 struct iwl_bt_uart_msg
*uart_msg
)
1991 __le32 bt_kill_ack_msg
[2] = {
1992 cpu_to_le32(0xFFFFFFF), cpu_to_le32(0xFFFFFC00) };
1994 kill_ack_msk
= (((BT_UART_MSG_FRAME3A2DP_MSK
|
1995 BT_UART_MSG_FRAME3SNIFF_MSK
|
1996 BT_UART_MSG_FRAME3SCOESCO_MSK
) &
1997 uart_msg
->frame3
) == 0) ? 1 : 0;
1998 if (priv
->kill_ack_mask
!= bt_kill_ack_msg
[kill_ack_msk
]) {
1999 priv
->bt_valid
|= IWLAGN_BT_VALID_KILL_ACK_MASK
;
2000 priv
->kill_ack_mask
= bt_kill_ack_msg
[kill_ack_msk
];
2001 /* schedule to send runtime bt_config */
2002 queue_work(priv
->workqueue
, &priv
->bt_runtime_config
);
2007 void iwlagn_bt_coex_profile_notif(struct iwl_priv
*priv
,
2008 struct iwl_rx_mem_buffer
*rxb
)
2010 unsigned long flags
;
2011 struct iwl_rx_packet
*pkt
= rxb_addr(rxb
);
2012 struct iwl_bt_coex_profile_notif
*coex
= &pkt
->u
.bt_coex_profile_notif
;
2013 struct iwlagn_bt_sco_cmd sco_cmd
= { .flags
= 0 };
2014 struct iwl_bt_uart_msg
*uart_msg
= &coex
->last_bt_uart_msg
;
2015 u8 last_traffic_load
;
2017 IWL_DEBUG_NOTIF(priv
, "BT Coex notification:\n");
2018 IWL_DEBUG_NOTIF(priv
, " status: %d\n", coex
->bt_status
);
2019 IWL_DEBUG_NOTIF(priv
, " traffic load: %d\n", coex
->bt_traffic_load
);
2020 IWL_DEBUG_NOTIF(priv
, " CI compliance: %d\n",
2021 coex
->bt_ci_compliance
);
2022 iwlagn_print_uartmsg(priv
, uart_msg
);
2024 last_traffic_load
= priv
->notif_bt_traffic_load
;
2025 priv
->notif_bt_traffic_load
= coex
->bt_traffic_load
;
2026 if (priv
->iw_mode
!= NL80211_IFTYPE_ADHOC
) {
2027 if (priv
->bt_status
!= coex
->bt_status
||
2028 last_traffic_load
!= coex
->bt_traffic_load
) {
2029 if (coex
->bt_status
) {
2031 if (!priv
->bt_ch_announce
)
2032 priv
->bt_traffic_load
=
2033 IWL_BT_COEX_TRAFFIC_LOAD_HIGH
;
2035 priv
->bt_traffic_load
=
2036 coex
->bt_traffic_load
;
2039 priv
->bt_traffic_load
=
2040 IWL_BT_COEX_TRAFFIC_LOAD_NONE
;
2042 priv
->bt_status
= coex
->bt_status
;
2043 queue_work(priv
->workqueue
,
2044 &priv
->bt_traffic_change_work
);
2046 if (priv
->bt_sco_active
!=
2047 (uart_msg
->frame3
& BT_UART_MSG_FRAME3SCOESCO_MSK
)) {
2048 priv
->bt_sco_active
= uart_msg
->frame3
&
2049 BT_UART_MSG_FRAME3SCOESCO_MSK
;
2050 if (priv
->bt_sco_active
)
2051 sco_cmd
.flags
|= IWLAGN_BT_SCO_ACTIVE
;
2052 iwl_send_cmd_pdu_async(priv
, REPLY_BT_COEX_SCO
,
2053 sizeof(sco_cmd
), &sco_cmd
, NULL
);
2057 iwlagn_set_kill_ack_msk(priv
, uart_msg
);
2059 /* FIXME: based on notification, adjust the prio_boost */
2061 spin_lock_irqsave(&priv
->lock
, flags
);
2062 priv
->bt_ci_compliance
= coex
->bt_ci_compliance
;
2063 spin_unlock_irqrestore(&priv
->lock
, flags
);
2066 void iwlagn_bt_rx_handler_setup(struct iwl_priv
*priv
)
2068 iwlagn_rx_handler_setup(priv
);
2069 priv
->rx_handlers
[REPLY_BT_COEX_PROFILE_NOTIF
] =
2070 iwlagn_bt_coex_profile_notif
;
2073 void iwlagn_bt_setup_deferred_work(struct iwl_priv
*priv
)
2075 iwlagn_setup_deferred_work(priv
);
2077 INIT_WORK(&priv
->bt_traffic_change_work
,
2078 iwlagn_bt_traffic_change_work
);
2081 void iwlagn_bt_cancel_deferred_work(struct iwl_priv
*priv
)
2083 cancel_work_sync(&priv
->bt_traffic_change_work
);
2086 static bool is_single_rx_stream(struct iwl_priv
*priv
)
2088 return priv
->current_ht_config
.smps
== IEEE80211_SMPS_STATIC
||
2089 priv
->current_ht_config
.single_chain_sufficient
;
2092 #define IWL_NUM_RX_CHAINS_MULTIPLE 3
2093 #define IWL_NUM_RX_CHAINS_SINGLE 2
2094 #define IWL_NUM_IDLE_CHAINS_DUAL 2
2095 #define IWL_NUM_IDLE_CHAINS_SINGLE 1
2098 * Determine how many receiver/antenna chains to use.
2100 * More provides better reception via diversity. Fewer saves power
2101 * at the expense of throughput, but only when not in powersave to
2104 * MIMO (dual stream) requires at least 2, but works better with 3.
2105 * This does not determine *which* chains to use, just how many.
2107 static int iwl_get_active_rx_chain_count(struct iwl_priv
*priv
)
2109 if (priv
->cfg
->bt_params
&&
2110 priv
->cfg
->bt_params
->advanced_bt_coexist
&&
2111 (priv
->bt_full_concurrent
||
2112 priv
->bt_traffic_load
>= IWL_BT_COEX_TRAFFIC_LOAD_HIGH
)) {
2114 * only use chain 'A' in bt high traffic load or
2115 * full concurrency mode
2117 return IWL_NUM_RX_CHAINS_SINGLE
;
2119 /* # of Rx chains to use when expecting MIMO. */
2120 if (is_single_rx_stream(priv
))
2121 return IWL_NUM_RX_CHAINS_SINGLE
;
2123 return IWL_NUM_RX_CHAINS_MULTIPLE
;
2127 * When we are in power saving mode, unless device support spatial
2128 * multiplexing power save, use the active count for rx chain count.
2130 static int iwl_get_idle_rx_chain_count(struct iwl_priv
*priv
, int active_cnt
)
2132 /* # Rx chains when idling, depending on SMPS mode */
2133 switch (priv
->current_ht_config
.smps
) {
2134 case IEEE80211_SMPS_STATIC
:
2135 case IEEE80211_SMPS_DYNAMIC
:
2136 return IWL_NUM_IDLE_CHAINS_SINGLE
;
2137 case IEEE80211_SMPS_OFF
:
2140 WARN(1, "invalid SMPS mode %d",
2141 priv
->current_ht_config
.smps
);
2146 /* up to 4 chains */
2147 static u8
iwl_count_chain_bitmap(u32 chain_bitmap
)
2150 res
= (chain_bitmap
& BIT(0)) >> 0;
2151 res
+= (chain_bitmap
& BIT(1)) >> 1;
2152 res
+= (chain_bitmap
& BIT(2)) >> 2;
2153 res
+= (chain_bitmap
& BIT(3)) >> 3;
2158 * iwlagn_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
2160 * Selects how many and which Rx receivers/antennas/chains to use.
2161 * This should not be used for scan command ... it puts data in wrong place.
2163 void iwlagn_set_rxon_chain(struct iwl_priv
*priv
, struct iwl_rxon_context
*ctx
)
2165 bool is_single
= is_single_rx_stream(priv
);
2166 bool is_cam
= !test_bit(STATUS_POWER_PMI
, &priv
->status
);
2167 u8 idle_rx_cnt
, active_rx_cnt
, valid_rx_cnt
;
2171 /* Tell uCode which antennas are actually connected.
2172 * Before first association, we assume all antennas are connected.
2173 * Just after first association, iwl_chain_noise_calibration()
2174 * checks which antennas actually *are* connected. */
2175 if (priv
->chain_noise_data
.active_chains
)
2176 active_chains
= priv
->chain_noise_data
.active_chains
;
2178 active_chains
= priv
->hw_params
.valid_rx_ant
;
2180 if (priv
->cfg
->bt_params
&&
2181 priv
->cfg
->bt_params
->advanced_bt_coexist
&&
2182 (priv
->bt_full_concurrent
||
2183 priv
->bt_traffic_load
>= IWL_BT_COEX_TRAFFIC_LOAD_HIGH
)) {
2185 * only use chain 'A' in bt high traffic load or
2186 * full concurrency mode
2188 active_chains
= first_antenna(active_chains
);
2191 rx_chain
= active_chains
<< RXON_RX_CHAIN_VALID_POS
;
2193 /* How many receivers should we use? */
2194 active_rx_cnt
= iwl_get_active_rx_chain_count(priv
);
2195 idle_rx_cnt
= iwl_get_idle_rx_chain_count(priv
, active_rx_cnt
);
2198 /* correct rx chain count according hw settings
2199 * and chain noise calibration
2201 valid_rx_cnt
= iwl_count_chain_bitmap(active_chains
);
2202 if (valid_rx_cnt
< active_rx_cnt
)
2203 active_rx_cnt
= valid_rx_cnt
;
2205 if (valid_rx_cnt
< idle_rx_cnt
)
2206 idle_rx_cnt
= valid_rx_cnt
;
2208 rx_chain
|= active_rx_cnt
<< RXON_RX_CHAIN_MIMO_CNT_POS
;
2209 rx_chain
|= idle_rx_cnt
<< RXON_RX_CHAIN_CNT_POS
;
2211 ctx
->staging
.rx_chain
= cpu_to_le16(rx_chain
);
2213 if (!is_single
&& (active_rx_cnt
>= IWL_NUM_RX_CHAINS_SINGLE
) && is_cam
)
2214 ctx
->staging
.rx_chain
|= RXON_RX_CHAIN_MIMO_FORCE_MSK
;
2216 ctx
->staging
.rx_chain
&= ~RXON_RX_CHAIN_MIMO_FORCE_MSK
;
2218 IWL_DEBUG_ASSOC(priv
, "rx_chain=0x%X active=%d idle=%d\n",
2219 ctx
->staging
.rx_chain
,
2220 active_rx_cnt
, idle_rx_cnt
);
2222 WARN_ON(active_rx_cnt
== 0 || idle_rx_cnt
== 0 ||
2223 active_rx_cnt
< idle_rx_cnt
);
2226 u8
iwl_toggle_tx_ant(struct iwl_priv
*priv
, u8 ant
, u8 valid
)
2231 if (priv
->band
== IEEE80211_BAND_2GHZ
&&
2232 priv
->bt_traffic_load
>= IWL_BT_COEX_TRAFFIC_LOAD_HIGH
)
2235 for (i
= 0; i
< RATE_ANT_NUM
- 1; i
++) {
2236 ind
= (ind
+ 1) < RATE_ANT_NUM
? ind
+ 1 : 0;
2237 if (valid
& BIT(ind
))
2243 static const char *get_csr_string(int cmd
)
2246 IWL_CMD(CSR_HW_IF_CONFIG_REG
);
2247 IWL_CMD(CSR_INT_COALESCING
);
2249 IWL_CMD(CSR_INT_MASK
);
2250 IWL_CMD(CSR_FH_INT_STATUS
);
2251 IWL_CMD(CSR_GPIO_IN
);
2253 IWL_CMD(CSR_GP_CNTRL
);
2254 IWL_CMD(CSR_HW_REV
);
2255 IWL_CMD(CSR_EEPROM_REG
);
2256 IWL_CMD(CSR_EEPROM_GP
);
2257 IWL_CMD(CSR_OTP_GP_REG
);
2258 IWL_CMD(CSR_GIO_REG
);
2259 IWL_CMD(CSR_GP_UCODE_REG
);
2260 IWL_CMD(CSR_GP_DRIVER_REG
);
2261 IWL_CMD(CSR_UCODE_DRV_GP1
);
2262 IWL_CMD(CSR_UCODE_DRV_GP2
);
2263 IWL_CMD(CSR_LED_REG
);
2264 IWL_CMD(CSR_DRAM_INT_TBL_REG
);
2265 IWL_CMD(CSR_GIO_CHICKEN_BITS
);
2266 IWL_CMD(CSR_ANA_PLL_CFG
);
2267 IWL_CMD(CSR_HW_REV_WA_REG
);
2268 IWL_CMD(CSR_DBG_HPET_MEM_REG
);
2274 void iwl_dump_csr(struct iwl_priv
*priv
)
2278 CSR_HW_IF_CONFIG_REG
,
2296 CSR_DRAM_INT_TBL_REG
,
2297 CSR_GIO_CHICKEN_BITS
,
2300 CSR_DBG_HPET_MEM_REG
2302 IWL_ERR(priv
, "CSR values:\n");
2303 IWL_ERR(priv
, "(2nd byte of CSR_INT_COALESCING is "
2304 "CSR_INT_PERIODIC_REG)\n");
2305 for (i
= 0; i
< ARRAY_SIZE(csr_tbl
); i
++) {
2306 IWL_ERR(priv
, " %25s: 0X%08x\n",
2307 get_csr_string(csr_tbl
[i
]),
2308 iwl_read32(priv
, csr_tbl
[i
]));
2312 static const char *get_fh_string(int cmd
)
2315 IWL_CMD(FH_RSCSR_CHNL0_STTS_WPTR_REG
);
2316 IWL_CMD(FH_RSCSR_CHNL0_RBDCB_BASE_REG
);
2317 IWL_CMD(FH_RSCSR_CHNL0_WPTR
);
2318 IWL_CMD(FH_MEM_RCSR_CHNL0_CONFIG_REG
);
2319 IWL_CMD(FH_MEM_RSSR_SHARED_CTRL_REG
);
2320 IWL_CMD(FH_MEM_RSSR_RX_STATUS_REG
);
2321 IWL_CMD(FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV
);
2322 IWL_CMD(FH_TSSR_TX_STATUS_REG
);
2323 IWL_CMD(FH_TSSR_TX_ERROR_REG
);
2329 int iwl_dump_fh(struct iwl_priv
*priv
, char **buf
, bool display
)
2332 #ifdef CONFIG_IWLWIFI_DEBUG
2337 FH_RSCSR_CHNL0_STTS_WPTR_REG
,
2338 FH_RSCSR_CHNL0_RBDCB_BASE_REG
,
2339 FH_RSCSR_CHNL0_WPTR
,
2340 FH_MEM_RCSR_CHNL0_CONFIG_REG
,
2341 FH_MEM_RSSR_SHARED_CTRL_REG
,
2342 FH_MEM_RSSR_RX_STATUS_REG
,
2343 FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV
,
2344 FH_TSSR_TX_STATUS_REG
,
2345 FH_TSSR_TX_ERROR_REG
2347 #ifdef CONFIG_IWLWIFI_DEBUG
2349 bufsz
= ARRAY_SIZE(fh_tbl
) * 48 + 40;
2350 *buf
= kmalloc(bufsz
, GFP_KERNEL
);
2353 pos
+= scnprintf(*buf
+ pos
, bufsz
- pos
,
2354 "FH register values:\n");
2355 for (i
= 0; i
< ARRAY_SIZE(fh_tbl
); i
++) {
2356 pos
+= scnprintf(*buf
+ pos
, bufsz
- pos
,
2358 get_fh_string(fh_tbl
[i
]),
2359 iwl_read_direct32(priv
, fh_tbl
[i
]));
2364 IWL_ERR(priv
, "FH register values:\n");
2365 for (i
= 0; i
< ARRAY_SIZE(fh_tbl
); i
++) {
2366 IWL_ERR(priv
, " %34s: 0X%08x\n",
2367 get_fh_string(fh_tbl
[i
]),
2368 iwl_read_direct32(priv
, fh_tbl
[i
]));