531a7dc3dc7287ec2035706045aaee08d094710d
[deliverable/linux.git] / drivers / net / wireless / iwlwifi / iwl-agn-lib.c
1 /******************************************************************************
2 *
3 * GPL LICENSE SUMMARY
4 *
5 * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of version 2 of the GNU General Public License as
9 * published by the Free Software Foundation.
10 *
11 * This program is distributed in the hope that it will be useful, but
12 * WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 * General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
19 * USA
20 *
21 * The full GNU General Public License is included in this distribution
22 * in the file called LICENSE.GPL.
23 *
24 * Contact Information:
25 * Intel Linux Wireless <ilw@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27 *
28 *****************************************************************************/
29 #include <linux/etherdevice.h>
30 #include <linux/kernel.h>
31 #include <linux/module.h>
32 #include <linux/init.h>
33 #include <linux/sched.h>
34
35 #include "iwl-dev.h"
36 #include "iwl-core.h"
37 #include "iwl-io.h"
38 #include "iwl-helpers.h"
39 #include "iwl-agn-hw.h"
40 #include "iwl-agn.h"
41 #include "iwl-sta.h"
42
43 static inline u32 iwlagn_get_scd_ssn(struct iwl5000_tx_resp *tx_resp)
44 {
45 return le32_to_cpup((__le32 *)&tx_resp->status +
46 tx_resp->frame_count) & MAX_SN;
47 }
48
49 static int iwlagn_tx_status_reply_tx(struct iwl_priv *priv,
50 struct iwl_ht_agg *agg,
51 struct iwl5000_tx_resp *tx_resp,
52 int txq_id, u16 start_idx)
53 {
54 u16 status;
55 struct agg_tx_status *frame_status = &tx_resp->status;
56 struct ieee80211_tx_info *info = NULL;
57 struct ieee80211_hdr *hdr = NULL;
58 u32 rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags);
59 int i, sh, idx;
60 u16 seq;
61
62 if (agg->wait_for_ba)
63 IWL_DEBUG_TX_REPLY(priv, "got tx response w/o block-ack\n");
64
65 agg->frame_count = tx_resp->frame_count;
66 agg->start_idx = start_idx;
67 agg->rate_n_flags = rate_n_flags;
68 agg->bitmap = 0;
69
70 /* # frames attempted by Tx command */
71 if (agg->frame_count == 1) {
72 /* Only one frame was attempted; no block-ack will arrive */
73 status = le16_to_cpu(frame_status[0].status);
74 idx = start_idx;
75
76 /* FIXME: code repetition */
77 IWL_DEBUG_TX_REPLY(priv, "FrameCnt = %d, StartIdx=%d idx=%d\n",
78 agg->frame_count, agg->start_idx, idx);
79
80 info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb);
81 info->status.rates[0].count = tx_resp->failure_frame + 1;
82 info->flags &= ~IEEE80211_TX_CTL_AMPDU;
83 info->flags |= iwl_tx_status_to_mac80211(status);
84 iwlagn_hwrate_to_tx_control(priv, rate_n_flags, info);
85
86 /* FIXME: code repetition end */
87
88 IWL_DEBUG_TX_REPLY(priv, "1 Frame 0x%x failure :%d\n",
89 status & 0xff, tx_resp->failure_frame);
90 IWL_DEBUG_TX_REPLY(priv, "Rate Info rate_n_flags=%x\n", rate_n_flags);
91
92 agg->wait_for_ba = 0;
93 } else {
94 /* Two or more frames were attempted; expect block-ack */
95 u64 bitmap = 0;
96
97 /*
98 * Start is the lowest frame sent. It may not be the first
99 * frame in the batch; we figure this out dynamically during
100 * the following loop.
101 */
102 int start = agg->start_idx;
103
104 /* Construct bit-map of pending frames within Tx window */
105 for (i = 0; i < agg->frame_count; i++) {
106 u16 sc;
107 status = le16_to_cpu(frame_status[i].status);
108 seq = le16_to_cpu(frame_status[i].sequence);
109 idx = SEQ_TO_INDEX(seq);
110 txq_id = SEQ_TO_QUEUE(seq);
111
112 if (status & (AGG_TX_STATE_FEW_BYTES_MSK |
113 AGG_TX_STATE_ABORT_MSK))
114 continue;
115
116 IWL_DEBUG_TX_REPLY(priv, "FrameCnt = %d, txq_id=%d idx=%d\n",
117 agg->frame_count, txq_id, idx);
118
119 hdr = iwl_tx_queue_get_hdr(priv, txq_id, idx);
120 if (!hdr) {
121 IWL_ERR(priv,
122 "BUG_ON idx doesn't point to valid skb"
123 " idx=%d, txq_id=%d\n", idx, txq_id);
124 return -1;
125 }
126
127 sc = le16_to_cpu(hdr->seq_ctrl);
128 if (idx != (SEQ_TO_SN(sc) & 0xff)) {
129 IWL_ERR(priv,
130 "BUG_ON idx doesn't match seq control"
131 " idx=%d, seq_idx=%d, seq=%d\n",
132 idx, SEQ_TO_SN(sc),
133 hdr->seq_ctrl);
134 return -1;
135 }
136
137 IWL_DEBUG_TX_REPLY(priv, "AGG Frame i=%d idx %d seq=%d\n",
138 i, idx, SEQ_TO_SN(sc));
139
140 /*
141 * sh -> how many frames ahead of the starting frame is
142 * the current one?
143 *
144 * Note that all frames sent in the batch must be in a
145 * 64-frame window, so this number should be in [0,63].
146 * If outside of this window, then we've found a new
147 * "first" frame in the batch and need to change start.
148 */
149 sh = idx - start;
150
151 /*
152 * If >= 64, out of window. start must be at the front
153 * of the circular buffer, idx must be near the end of
154 * the buffer, and idx is the new "first" frame. Shift
155 * the indices around.
156 */
157 if (sh >= 64) {
158 /* Shift bitmap by start - idx, wrapped */
159 sh = 0x100 - idx + start;
160 bitmap = bitmap << sh;
161 /* Now idx is the new start so sh = 0 */
162 sh = 0;
163 start = idx;
164 /*
165 * If <= -64 then wraps the 256-pkt circular buffer
166 * (e.g., start = 255 and idx = 0, sh should be 1)
167 */
168 } else if (sh <= -64) {
169 sh = 0x100 - start + idx;
170 /*
171 * If < 0 but > -64, out of window. idx is before start
172 * but not wrapped. Shift the indices around.
173 */
174 } else if (sh < 0) {
175 /* Shift by how far start is ahead of idx */
176 sh = start - idx;
177 bitmap = bitmap << sh;
178 /* Now idx is the new start so sh = 0 */
179 start = idx;
180 sh = 0;
181 }
182 /* Sequence number start + sh was sent in this batch */
183 bitmap |= 1ULL << sh;
184 IWL_DEBUG_TX_REPLY(priv, "start=%d bitmap=0x%llx\n",
185 start, (unsigned long long)bitmap);
186 }
187
188 /*
189 * Store the bitmap and possibly the new start, if we wrapped
190 * the buffer above
191 */
192 agg->bitmap = bitmap;
193 agg->start_idx = start;
194 IWL_DEBUG_TX_REPLY(priv, "Frames %d start_idx=%d bitmap=0x%llx\n",
195 agg->frame_count, agg->start_idx,
196 (unsigned long long)agg->bitmap);
197
198 if (bitmap)
199 agg->wait_for_ba = 1;
200 }
201 return 0;
202 }
203
204 void iwl_check_abort_status(struct iwl_priv *priv,
205 u8 frame_count, u32 status)
206 {
207 if (frame_count == 1 && status == TX_STATUS_FAIL_RFKILL_FLUSH) {
208 IWL_ERR(priv, "Tx flush command to flush out all frames\n");
209 if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
210 queue_work(priv->workqueue, &priv->tx_flush);
211 }
212 }
213
214 static void iwlagn_rx_reply_tx(struct iwl_priv *priv,
215 struct iwl_rx_mem_buffer *rxb)
216 {
217 struct iwl_rx_packet *pkt = rxb_addr(rxb);
218 u16 sequence = le16_to_cpu(pkt->hdr.sequence);
219 int txq_id = SEQ_TO_QUEUE(sequence);
220 int index = SEQ_TO_INDEX(sequence);
221 struct iwl_tx_queue *txq = &priv->txq[txq_id];
222 struct ieee80211_tx_info *info;
223 struct iwl5000_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
224 u32 status = le16_to_cpu(tx_resp->status.status);
225 int tid;
226 int sta_id;
227 int freed;
228 unsigned long flags;
229
230 if ((index >= txq->q.n_bd) || (iwl_queue_used(&txq->q, index) == 0)) {
231 IWL_ERR(priv, "Read index for DMA queue txq_id (%d) index %d "
232 "is out of range [0-%d] %d %d\n", txq_id,
233 index, txq->q.n_bd, txq->q.write_ptr,
234 txq->q.read_ptr);
235 return;
236 }
237
238 info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb);
239 memset(&info->status, 0, sizeof(info->status));
240
241 tid = (tx_resp->ra_tid & IWL50_TX_RES_TID_MSK) >> IWL50_TX_RES_TID_POS;
242 sta_id = (tx_resp->ra_tid & IWL50_TX_RES_RA_MSK) >> IWL50_TX_RES_RA_POS;
243
244 spin_lock_irqsave(&priv->sta_lock, flags);
245 if (txq->sched_retry) {
246 const u32 scd_ssn = iwlagn_get_scd_ssn(tx_resp);
247 struct iwl_ht_agg *agg;
248
249 agg = &priv->stations[sta_id].tid[tid].agg;
250 /*
251 * If the BT kill count is non-zero, we'll get this
252 * notification again.
253 */
254 if (tx_resp->bt_kill_count && tx_resp->frame_count == 1 &&
255 priv->cfg->advanced_bt_coexist) {
256 IWL_WARN(priv, "receive reply tx with bt_kill\n");
257 }
258 iwlagn_tx_status_reply_tx(priv, agg, tx_resp, txq_id, index);
259
260 /* check if BAR is needed */
261 if ((tx_resp->frame_count == 1) && !iwl_is_tx_success(status))
262 info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
263
264 if (txq->q.read_ptr != (scd_ssn & 0xff)) {
265 index = iwl_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd);
266 IWL_DEBUG_TX_REPLY(priv, "Retry scheduler reclaim "
267 "scd_ssn=%d idx=%d txq=%d swq=%d\n",
268 scd_ssn , index, txq_id, txq->swq_id);
269
270 freed = iwlagn_tx_queue_reclaim(priv, txq_id, index);
271 iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
272
273 if (priv->mac80211_registered &&
274 (iwl_queue_space(&txq->q) > txq->q.low_mark) &&
275 (agg->state != IWL_EMPTYING_HW_QUEUE_DELBA)) {
276 if (agg->state == IWL_AGG_OFF)
277 iwl_wake_queue(priv, txq_id);
278 else
279 iwl_wake_queue(priv, txq->swq_id);
280 }
281 }
282 } else {
283 BUG_ON(txq_id != txq->swq_id);
284
285 info->status.rates[0].count = tx_resp->failure_frame + 1;
286 info->flags |= iwl_tx_status_to_mac80211(status);
287 iwlagn_hwrate_to_tx_control(priv,
288 le32_to_cpu(tx_resp->rate_n_flags),
289 info);
290
291 IWL_DEBUG_TX_REPLY(priv, "TXQ %d status %s (0x%08x) rate_n_flags "
292 "0x%x retries %d\n",
293 txq_id,
294 iwl_get_tx_fail_reason(status), status,
295 le32_to_cpu(tx_resp->rate_n_flags),
296 tx_resp->failure_frame);
297
298 freed = iwlagn_tx_queue_reclaim(priv, txq_id, index);
299 iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
300
301 if (priv->mac80211_registered &&
302 (iwl_queue_space(&txq->q) > txq->q.low_mark))
303 iwl_wake_queue(priv, txq_id);
304 }
305
306 iwlagn_txq_check_empty(priv, sta_id, tid, txq_id);
307
308 iwl_check_abort_status(priv, tx_resp->frame_count, status);
309 spin_unlock_irqrestore(&priv->sta_lock, flags);
310 }
311
312 void iwlagn_rx_handler_setup(struct iwl_priv *priv)
313 {
314 /* init calibration handlers */
315 priv->rx_handlers[CALIBRATION_RES_NOTIFICATION] =
316 iwlagn_rx_calib_result;
317 priv->rx_handlers[CALIBRATION_COMPLETE_NOTIFICATION] =
318 iwlagn_rx_calib_complete;
319 priv->rx_handlers[REPLY_TX] = iwlagn_rx_reply_tx;
320 }
321
322 void iwlagn_setup_deferred_work(struct iwl_priv *priv)
323 {
324 /* in agn, the tx power calibration is done in uCode */
325 priv->disable_tx_power_cal = 1;
326 }
327
328 int iwlagn_hw_valid_rtc_data_addr(u32 addr)
329 {
330 return (addr >= IWLAGN_RTC_DATA_LOWER_BOUND) &&
331 (addr < IWLAGN_RTC_DATA_UPPER_BOUND);
332 }
333
334 int iwlagn_send_tx_power(struct iwl_priv *priv)
335 {
336 struct iwl5000_tx_power_dbm_cmd tx_power_cmd;
337 u8 tx_ant_cfg_cmd;
338
339 /* half dBm need to multiply */
340 tx_power_cmd.global_lmt = (s8)(2 * priv->tx_power_user_lmt);
341
342 if (priv->tx_power_lmt_in_half_dbm &&
343 priv->tx_power_lmt_in_half_dbm < tx_power_cmd.global_lmt) {
344 /*
345 * For the newer devices which using enhanced/extend tx power
346 * table in EEPROM, the format is in half dBm. driver need to
347 * convert to dBm format before report to mac80211.
348 * By doing so, there is a possibility of 1/2 dBm resolution
349 * lost. driver will perform "round-up" operation before
350 * reporting, but it will cause 1/2 dBm tx power over the
351 * regulatory limit. Perform the checking here, if the
352 * "tx_power_user_lmt" is higher than EEPROM value (in
353 * half-dBm format), lower the tx power based on EEPROM
354 */
355 tx_power_cmd.global_lmt = priv->tx_power_lmt_in_half_dbm;
356 }
357 tx_power_cmd.flags = IWL50_TX_POWER_NO_CLOSED;
358 tx_power_cmd.srv_chan_lmt = IWL50_TX_POWER_AUTO;
359
360 if (IWL_UCODE_API(priv->ucode_ver) == 1)
361 tx_ant_cfg_cmd = REPLY_TX_POWER_DBM_CMD_V1;
362 else
363 tx_ant_cfg_cmd = REPLY_TX_POWER_DBM_CMD;
364
365 return iwl_send_cmd_pdu_async(priv, tx_ant_cfg_cmd,
366 sizeof(tx_power_cmd), &tx_power_cmd,
367 NULL);
368 }
369
370 void iwlagn_temperature(struct iwl_priv *priv)
371 {
372 /* store temperature from statistics (in Celsius) */
373 priv->temperature =
374 le32_to_cpu(priv->_agn.statistics.general.common.temperature);
375 iwl_tt_handler(priv);
376 }
377
378 u16 iwlagn_eeprom_calib_version(struct iwl_priv *priv)
379 {
380 struct iwl_eeprom_calib_hdr {
381 u8 version;
382 u8 pa_type;
383 u16 voltage;
384 } *hdr;
385
386 hdr = (struct iwl_eeprom_calib_hdr *)iwl_eeprom_query_addr(priv,
387 EEPROM_CALIB_ALL);
388 return hdr->version;
389
390 }
391
392 /*
393 * EEPROM
394 */
395 static u32 eeprom_indirect_address(const struct iwl_priv *priv, u32 address)
396 {
397 u16 offset = 0;
398
399 if ((address & INDIRECT_ADDRESS) == 0)
400 return address;
401
402 switch (address & INDIRECT_TYPE_MSK) {
403 case INDIRECT_HOST:
404 offset = iwl_eeprom_query16(priv, EEPROM_LINK_HOST);
405 break;
406 case INDIRECT_GENERAL:
407 offset = iwl_eeprom_query16(priv, EEPROM_LINK_GENERAL);
408 break;
409 case INDIRECT_REGULATORY:
410 offset = iwl_eeprom_query16(priv, EEPROM_LINK_REGULATORY);
411 break;
412 case INDIRECT_CALIBRATION:
413 offset = iwl_eeprom_query16(priv, EEPROM_LINK_CALIBRATION);
414 break;
415 case INDIRECT_PROCESS_ADJST:
416 offset = iwl_eeprom_query16(priv, EEPROM_LINK_PROCESS_ADJST);
417 break;
418 case INDIRECT_OTHERS:
419 offset = iwl_eeprom_query16(priv, EEPROM_LINK_OTHERS);
420 break;
421 default:
422 IWL_ERR(priv, "illegal indirect type: 0x%X\n",
423 address & INDIRECT_TYPE_MSK);
424 break;
425 }
426
427 /* translate the offset from words to byte */
428 return (address & ADDRESS_MSK) + (offset << 1);
429 }
430
431 const u8 *iwlagn_eeprom_query_addr(const struct iwl_priv *priv,
432 size_t offset)
433 {
434 u32 address = eeprom_indirect_address(priv, offset);
435 BUG_ON(address >= priv->cfg->eeprom_size);
436 return &priv->eeprom[address];
437 }
438
439 struct iwl_mod_params iwlagn_mod_params = {
440 .amsdu_size_8K = 1,
441 .restart_fw = 1,
442 /* the rest are 0 by default */
443 };
444
445 void iwlagn_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
446 {
447 unsigned long flags;
448 int i;
449 spin_lock_irqsave(&rxq->lock, flags);
450 INIT_LIST_HEAD(&rxq->rx_free);
451 INIT_LIST_HEAD(&rxq->rx_used);
452 /* Fill the rx_used queue with _all_ of the Rx buffers */
453 for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
454 /* In the reset function, these buffers may have been allocated
455 * to an SKB, so we need to unmap and free potential storage */
456 if (rxq->pool[i].page != NULL) {
457 pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
458 PAGE_SIZE << priv->hw_params.rx_page_order,
459 PCI_DMA_FROMDEVICE);
460 __iwl_free_pages(priv, rxq->pool[i].page);
461 rxq->pool[i].page = NULL;
462 }
463 list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
464 }
465
466 for (i = 0; i < RX_QUEUE_SIZE; i++)
467 rxq->queue[i] = NULL;
468
469 /* Set us so that we have processed and used all buffers, but have
470 * not restocked the Rx queue with fresh buffers */
471 rxq->read = rxq->write = 0;
472 rxq->write_actual = 0;
473 rxq->free_count = 0;
474 spin_unlock_irqrestore(&rxq->lock, flags);
475 }
476
477 int iwlagn_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
478 {
479 u32 rb_size;
480 const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */
481 u32 rb_timeout = 0; /* FIXME: RX_RB_TIMEOUT for all devices? */
482
483 if (!priv->cfg->use_isr_legacy)
484 rb_timeout = RX_RB_TIMEOUT;
485
486 if (priv->cfg->mod_params->amsdu_size_8K)
487 rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K;
488 else
489 rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K;
490
491 /* Stop Rx DMA */
492 iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
493
494 /* Reset driver's Rx queue write index */
495 iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0);
496
497 /* Tell device where to find RBD circular buffer in DRAM */
498 iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_BASE_REG,
499 (u32)(rxq->bd_dma >> 8));
500
501 /* Tell device where in DRAM to update its Rx status */
502 iwl_write_direct32(priv, FH_RSCSR_CHNL0_STTS_WPTR_REG,
503 rxq->rb_stts_dma >> 4);
504
505 /* Enable Rx DMA
506 * FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY is set because of HW bug in
507 * the credit mechanism in 5000 HW RX FIFO
508 * Direct rx interrupts to hosts
509 * Rx buffer size 4 or 8k
510 * RB timeout 0x10
511 * 256 RBDs
512 */
513 iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG,
514 FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL |
515 FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY |
516 FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL |
517 FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK |
518 rb_size|
519 (rb_timeout << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)|
520 (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS));
521
522 /* Set interrupt coalescing timer to default (2048 usecs) */
523 iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_TIMEOUT_DEF);
524
525 return 0;
526 }
527
528 int iwlagn_hw_nic_init(struct iwl_priv *priv)
529 {
530 unsigned long flags;
531 struct iwl_rx_queue *rxq = &priv->rxq;
532 int ret;
533
534 /* nic_init */
535 spin_lock_irqsave(&priv->lock, flags);
536 priv->cfg->ops->lib->apm_ops.init(priv);
537
538 /* Set interrupt coalescing calibration timer to default (512 usecs) */
539 iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_CALIB_TIMEOUT_DEF);
540
541 spin_unlock_irqrestore(&priv->lock, flags);
542
543 ret = priv->cfg->ops->lib->apm_ops.set_pwr_src(priv, IWL_PWR_SRC_VMAIN);
544
545 priv->cfg->ops->lib->apm_ops.config(priv);
546
547 /* Allocate the RX queue, or reset if it is already allocated */
548 if (!rxq->bd) {
549 ret = iwl_rx_queue_alloc(priv);
550 if (ret) {
551 IWL_ERR(priv, "Unable to initialize Rx queue\n");
552 return -ENOMEM;
553 }
554 } else
555 iwlagn_rx_queue_reset(priv, rxq);
556
557 iwlagn_rx_replenish(priv);
558
559 iwlagn_rx_init(priv, rxq);
560
561 spin_lock_irqsave(&priv->lock, flags);
562
563 rxq->need_update = 1;
564 iwl_rx_queue_update_write_ptr(priv, rxq);
565
566 spin_unlock_irqrestore(&priv->lock, flags);
567
568 /* Allocate or reset and init all Tx and Command queues */
569 if (!priv->txq) {
570 ret = iwlagn_txq_ctx_alloc(priv);
571 if (ret)
572 return ret;
573 } else
574 iwlagn_txq_ctx_reset(priv);
575
576 set_bit(STATUS_INIT, &priv->status);
577
578 return 0;
579 }
580
581 /**
582 * iwlagn_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
583 */
584 static inline __le32 iwlagn_dma_addr2rbd_ptr(struct iwl_priv *priv,
585 dma_addr_t dma_addr)
586 {
587 return cpu_to_le32((u32)(dma_addr >> 8));
588 }
589
590 /**
591 * iwlagn_rx_queue_restock - refill RX queue from pre-allocated pool
592 *
593 * If there are slots in the RX queue that need to be restocked,
594 * and we have free pre-allocated buffers, fill the ranks as much
595 * as we can, pulling from rx_free.
596 *
597 * This moves the 'write' index forward to catch up with 'processed', and
598 * also updates the memory address in the firmware to reference the new
599 * target buffer.
600 */
601 void iwlagn_rx_queue_restock(struct iwl_priv *priv)
602 {
603 struct iwl_rx_queue *rxq = &priv->rxq;
604 struct list_head *element;
605 struct iwl_rx_mem_buffer *rxb;
606 unsigned long flags;
607
608 spin_lock_irqsave(&rxq->lock, flags);
609 while ((iwl_rx_queue_space(rxq) > 0) && (rxq->free_count)) {
610 /* The overwritten rxb must be a used one */
611 rxb = rxq->queue[rxq->write];
612 BUG_ON(rxb && rxb->page);
613
614 /* Get next free Rx buffer, remove from free list */
615 element = rxq->rx_free.next;
616 rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
617 list_del(element);
618
619 /* Point to Rx buffer via next RBD in circular buffer */
620 rxq->bd[rxq->write] = iwlagn_dma_addr2rbd_ptr(priv,
621 rxb->page_dma);
622 rxq->queue[rxq->write] = rxb;
623 rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
624 rxq->free_count--;
625 }
626 spin_unlock_irqrestore(&rxq->lock, flags);
627 /* If the pre-allocated buffer pool is dropping low, schedule to
628 * refill it */
629 if (rxq->free_count <= RX_LOW_WATERMARK)
630 queue_work(priv->workqueue, &priv->rx_replenish);
631
632
633 /* If we've added more space for the firmware to place data, tell it.
634 * Increment device's write pointer in multiples of 8. */
635 if (rxq->write_actual != (rxq->write & ~0x7)) {
636 spin_lock_irqsave(&rxq->lock, flags);
637 rxq->need_update = 1;
638 spin_unlock_irqrestore(&rxq->lock, flags);
639 iwl_rx_queue_update_write_ptr(priv, rxq);
640 }
641 }
642
643 /**
644 * iwlagn_rx_replenish - Move all used packet from rx_used to rx_free
645 *
646 * When moving to rx_free an SKB is allocated for the slot.
647 *
648 * Also restock the Rx queue via iwl_rx_queue_restock.
649 * This is called as a scheduled work item (except for during initialization)
650 */
651 void iwlagn_rx_allocate(struct iwl_priv *priv, gfp_t priority)
652 {
653 struct iwl_rx_queue *rxq = &priv->rxq;
654 struct list_head *element;
655 struct iwl_rx_mem_buffer *rxb;
656 struct page *page;
657 unsigned long flags;
658 gfp_t gfp_mask = priority;
659
660 while (1) {
661 spin_lock_irqsave(&rxq->lock, flags);
662 if (list_empty(&rxq->rx_used)) {
663 spin_unlock_irqrestore(&rxq->lock, flags);
664 return;
665 }
666 spin_unlock_irqrestore(&rxq->lock, flags);
667
668 if (rxq->free_count > RX_LOW_WATERMARK)
669 gfp_mask |= __GFP_NOWARN;
670
671 if (priv->hw_params.rx_page_order > 0)
672 gfp_mask |= __GFP_COMP;
673
674 /* Alloc a new receive buffer */
675 page = alloc_pages(gfp_mask, priv->hw_params.rx_page_order);
676 if (!page) {
677 if (net_ratelimit())
678 IWL_DEBUG_INFO(priv, "alloc_pages failed, "
679 "order: %d\n",
680 priv->hw_params.rx_page_order);
681
682 if ((rxq->free_count <= RX_LOW_WATERMARK) &&
683 net_ratelimit())
684 IWL_CRIT(priv, "Failed to alloc_pages with %s. Only %u free buffers remaining.\n",
685 priority == GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL",
686 rxq->free_count);
687 /* We don't reschedule replenish work here -- we will
688 * call the restock method and if it still needs
689 * more buffers it will schedule replenish */
690 return;
691 }
692
693 spin_lock_irqsave(&rxq->lock, flags);
694
695 if (list_empty(&rxq->rx_used)) {
696 spin_unlock_irqrestore(&rxq->lock, flags);
697 __free_pages(page, priv->hw_params.rx_page_order);
698 return;
699 }
700 element = rxq->rx_used.next;
701 rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
702 list_del(element);
703
704 spin_unlock_irqrestore(&rxq->lock, flags);
705
706 BUG_ON(rxb->page);
707 rxb->page = page;
708 /* Get physical address of the RB */
709 rxb->page_dma = pci_map_page(priv->pci_dev, page, 0,
710 PAGE_SIZE << priv->hw_params.rx_page_order,
711 PCI_DMA_FROMDEVICE);
712 /* dma address must be no more than 36 bits */
713 BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36));
714 /* and also 256 byte aligned! */
715 BUG_ON(rxb->page_dma & DMA_BIT_MASK(8));
716
717 spin_lock_irqsave(&rxq->lock, flags);
718
719 list_add_tail(&rxb->list, &rxq->rx_free);
720 rxq->free_count++;
721 priv->alloc_rxb_page++;
722
723 spin_unlock_irqrestore(&rxq->lock, flags);
724 }
725 }
726
727 void iwlagn_rx_replenish(struct iwl_priv *priv)
728 {
729 unsigned long flags;
730
731 iwlagn_rx_allocate(priv, GFP_KERNEL);
732
733 spin_lock_irqsave(&priv->lock, flags);
734 iwlagn_rx_queue_restock(priv);
735 spin_unlock_irqrestore(&priv->lock, flags);
736 }
737
738 void iwlagn_rx_replenish_now(struct iwl_priv *priv)
739 {
740 iwlagn_rx_allocate(priv, GFP_ATOMIC);
741
742 iwlagn_rx_queue_restock(priv);
743 }
744
745 /* Assumes that the skb field of the buffers in 'pool' is kept accurate.
746 * If an SKB has been detached, the POOL needs to have its SKB set to NULL
747 * This free routine walks the list of POOL entries and if SKB is set to
748 * non NULL it is unmapped and freed
749 */
750 void iwlagn_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
751 {
752 int i;
753 for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
754 if (rxq->pool[i].page != NULL) {
755 pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
756 PAGE_SIZE << priv->hw_params.rx_page_order,
757 PCI_DMA_FROMDEVICE);
758 __iwl_free_pages(priv, rxq->pool[i].page);
759 rxq->pool[i].page = NULL;
760 }
761 }
762
763 dma_free_coherent(&priv->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
764 rxq->bd_dma);
765 dma_free_coherent(&priv->pci_dev->dev, sizeof(struct iwl_rb_status),
766 rxq->rb_stts, rxq->rb_stts_dma);
767 rxq->bd = NULL;
768 rxq->rb_stts = NULL;
769 }
770
771 int iwlagn_rxq_stop(struct iwl_priv *priv)
772 {
773
774 /* stop Rx DMA */
775 iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
776 iwl_poll_direct_bit(priv, FH_MEM_RSSR_RX_STATUS_REG,
777 FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000);
778
779 return 0;
780 }
781
782 int iwlagn_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band)
783 {
784 int idx = 0;
785 int band_offset = 0;
786
787 /* HT rate format: mac80211 wants an MCS number, which is just LSB */
788 if (rate_n_flags & RATE_MCS_HT_MSK) {
789 idx = (rate_n_flags & 0xff);
790 return idx;
791 /* Legacy rate format, search for match in table */
792 } else {
793 if (band == IEEE80211_BAND_5GHZ)
794 band_offset = IWL_FIRST_OFDM_RATE;
795 for (idx = band_offset; idx < IWL_RATE_COUNT_LEGACY; idx++)
796 if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF))
797 return idx - band_offset;
798 }
799
800 return -1;
801 }
802
803 /* Calc max signal level (dBm) among 3 possible receivers */
804 static inline int iwlagn_calc_rssi(struct iwl_priv *priv,
805 struct iwl_rx_phy_res *rx_resp)
806 {
807 return priv->cfg->ops->utils->calc_rssi(priv, rx_resp);
808 }
809
810 static u32 iwlagn_translate_rx_status(struct iwl_priv *priv, u32 decrypt_in)
811 {
812 u32 decrypt_out = 0;
813
814 if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) ==
815 RX_RES_STATUS_STATION_FOUND)
816 decrypt_out |= (RX_RES_STATUS_STATION_FOUND |
817 RX_RES_STATUS_NO_STATION_INFO_MISMATCH);
818
819 decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK);
820
821 /* packet was not encrypted */
822 if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
823 RX_RES_STATUS_SEC_TYPE_NONE)
824 return decrypt_out;
825
826 /* packet was encrypted with unknown alg */
827 if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
828 RX_RES_STATUS_SEC_TYPE_ERR)
829 return decrypt_out;
830
831 /* decryption was not done in HW */
832 if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) !=
833 RX_MPDU_RES_STATUS_DEC_DONE_MSK)
834 return decrypt_out;
835
836 switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) {
837
838 case RX_RES_STATUS_SEC_TYPE_CCMP:
839 /* alg is CCM: check MIC only */
840 if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK))
841 /* Bad MIC */
842 decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
843 else
844 decrypt_out |= RX_RES_STATUS_DECRYPT_OK;
845
846 break;
847
848 case RX_RES_STATUS_SEC_TYPE_TKIP:
849 if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) {
850 /* Bad TTAK */
851 decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK;
852 break;
853 }
854 /* fall through if TTAK OK */
855 default:
856 if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK))
857 decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
858 else
859 decrypt_out |= RX_RES_STATUS_DECRYPT_OK;
860 break;
861 }
862
863 IWL_DEBUG_RX(priv, "decrypt_in:0x%x decrypt_out = 0x%x\n",
864 decrypt_in, decrypt_out);
865
866 return decrypt_out;
867 }
868
869 static void iwlagn_pass_packet_to_mac80211(struct iwl_priv *priv,
870 struct ieee80211_hdr *hdr,
871 u16 len,
872 u32 ampdu_status,
873 struct iwl_rx_mem_buffer *rxb,
874 struct ieee80211_rx_status *stats)
875 {
876 struct sk_buff *skb;
877 __le16 fc = hdr->frame_control;
878
879 /* We only process data packets if the interface is open */
880 if (unlikely(!priv->is_open)) {
881 IWL_DEBUG_DROP_LIMIT(priv,
882 "Dropping packet while interface is not open.\n");
883 return;
884 }
885
886 /* In case of HW accelerated crypto and bad decryption, drop */
887 if (!priv->cfg->mod_params->sw_crypto &&
888 iwl_set_decrypted_flag(priv, hdr, ampdu_status, stats))
889 return;
890
891 skb = dev_alloc_skb(128);
892 if (!skb) {
893 IWL_ERR(priv, "dev_alloc_skb failed\n");
894 return;
895 }
896
897 skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb), len);
898
899 iwl_update_stats(priv, false, fc, len);
900 memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
901
902 ieee80211_rx(priv->hw, skb);
903 priv->alloc_rxb_page--;
904 rxb->page = NULL;
905 }
906
907 /* Called for REPLY_RX (legacy ABG frames), or
908 * REPLY_RX_MPDU_CMD (HT high-throughput N frames). */
909 void iwlagn_rx_reply_rx(struct iwl_priv *priv,
910 struct iwl_rx_mem_buffer *rxb)
911 {
912 struct ieee80211_hdr *header;
913 struct ieee80211_rx_status rx_status;
914 struct iwl_rx_packet *pkt = rxb_addr(rxb);
915 struct iwl_rx_phy_res *phy_res;
916 __le32 rx_pkt_status;
917 struct iwl_rx_mpdu_res_start *amsdu;
918 u32 len;
919 u32 ampdu_status;
920 u32 rate_n_flags;
921
922 /**
923 * REPLY_RX and REPLY_RX_MPDU_CMD are handled differently.
924 * REPLY_RX: physical layer info is in this buffer
925 * REPLY_RX_MPDU_CMD: physical layer info was sent in separate
926 * command and cached in priv->last_phy_res
927 *
928 * Here we set up local variables depending on which command is
929 * received.
930 */
931 if (pkt->hdr.cmd == REPLY_RX) {
932 phy_res = (struct iwl_rx_phy_res *)pkt->u.raw;
933 header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*phy_res)
934 + phy_res->cfg_phy_cnt);
935
936 len = le16_to_cpu(phy_res->byte_count);
937 rx_pkt_status = *(__le32 *)(pkt->u.raw + sizeof(*phy_res) +
938 phy_res->cfg_phy_cnt + len);
939 ampdu_status = le32_to_cpu(rx_pkt_status);
940 } else {
941 if (!priv->_agn.last_phy_res_valid) {
942 IWL_ERR(priv, "MPDU frame without cached PHY data\n");
943 return;
944 }
945 phy_res = &priv->_agn.last_phy_res;
946 amsdu = (struct iwl_rx_mpdu_res_start *)pkt->u.raw;
947 header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*amsdu));
948 len = le16_to_cpu(amsdu->byte_count);
949 rx_pkt_status = *(__le32 *)(pkt->u.raw + sizeof(*amsdu) + len);
950 ampdu_status = iwlagn_translate_rx_status(priv,
951 le32_to_cpu(rx_pkt_status));
952 }
953
954 if ((unlikely(phy_res->cfg_phy_cnt > 20))) {
955 IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d/n",
956 phy_res->cfg_phy_cnt);
957 return;
958 }
959
960 if (!(rx_pkt_status & RX_RES_STATUS_NO_CRC32_ERROR) ||
961 !(rx_pkt_status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
962 IWL_DEBUG_RX(priv, "Bad CRC or FIFO: 0x%08X.\n",
963 le32_to_cpu(rx_pkt_status));
964 return;
965 }
966
967 /* This will be used in several places later */
968 rate_n_flags = le32_to_cpu(phy_res->rate_n_flags);
969
970 /* rx_status carries information about the packet to mac80211 */
971 rx_status.mactime = le64_to_cpu(phy_res->timestamp);
972 rx_status.freq =
973 ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel));
974 rx_status.band = (phy_res->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
975 IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
976 rx_status.rate_idx =
977 iwlagn_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band);
978 rx_status.flag = 0;
979
980 /* TSF isn't reliable. In order to allow smooth user experience,
981 * this W/A doesn't propagate it to the mac80211 */
982 /*rx_status.flag |= RX_FLAG_TSFT;*/
983
984 priv->ucode_beacon_time = le32_to_cpu(phy_res->beacon_time_stamp);
985
986 /* Find max signal strength (dBm) among 3 antenna/receiver chains */
987 rx_status.signal = iwlagn_calc_rssi(priv, phy_res);
988
989 iwl_dbg_log_rx_data_frame(priv, len, header);
990 IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, TSF %llu\n",
991 rx_status.signal, (unsigned long long)rx_status.mactime);
992
993 /*
994 * "antenna number"
995 *
996 * It seems that the antenna field in the phy flags value
997 * is actually a bit field. This is undefined by radiotap,
998 * it wants an actual antenna number but I always get "7"
999 * for most legacy frames I receive indicating that the
1000 * same frame was received on all three RX chains.
1001 *
1002 * I think this field should be removed in favor of a
1003 * new 802.11n radiotap field "RX chains" that is defined
1004 * as a bitmask.
1005 */
1006 rx_status.antenna =
1007 (le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK)
1008 >> RX_RES_PHY_FLAGS_ANTENNA_POS;
1009
1010 /* set the preamble flag if appropriate */
1011 if (phy_res->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
1012 rx_status.flag |= RX_FLAG_SHORTPRE;
1013
1014 /* Set up the HT phy flags */
1015 if (rate_n_flags & RATE_MCS_HT_MSK)
1016 rx_status.flag |= RX_FLAG_HT;
1017 if (rate_n_flags & RATE_MCS_HT40_MSK)
1018 rx_status.flag |= RX_FLAG_40MHZ;
1019 if (rate_n_flags & RATE_MCS_SGI_MSK)
1020 rx_status.flag |= RX_FLAG_SHORT_GI;
1021
1022 iwlagn_pass_packet_to_mac80211(priv, header, len, ampdu_status,
1023 rxb, &rx_status);
1024 }
1025
1026 /* Cache phy data (Rx signal strength, etc) for HT frame (REPLY_RX_PHY_CMD).
1027 * This will be used later in iwl_rx_reply_rx() for REPLY_RX_MPDU_CMD. */
1028 void iwlagn_rx_reply_rx_phy(struct iwl_priv *priv,
1029 struct iwl_rx_mem_buffer *rxb)
1030 {
1031 struct iwl_rx_packet *pkt = rxb_addr(rxb);
1032 priv->_agn.last_phy_res_valid = true;
1033 memcpy(&priv->_agn.last_phy_res, pkt->u.raw,
1034 sizeof(struct iwl_rx_phy_res));
1035 }
1036
1037 static int iwl_get_single_channel_for_scan(struct iwl_priv *priv,
1038 struct ieee80211_vif *vif,
1039 enum ieee80211_band band,
1040 struct iwl_scan_channel *scan_ch)
1041 {
1042 const struct ieee80211_supported_band *sband;
1043 u16 passive_dwell = 0;
1044 u16 active_dwell = 0;
1045 int added = 0;
1046 u16 channel = 0;
1047
1048 sband = iwl_get_hw_mode(priv, band);
1049 if (!sband) {
1050 IWL_ERR(priv, "invalid band\n");
1051 return added;
1052 }
1053
1054 active_dwell = iwl_get_active_dwell_time(priv, band, 0);
1055 passive_dwell = iwl_get_passive_dwell_time(priv, band, vif);
1056
1057 if (passive_dwell <= active_dwell)
1058 passive_dwell = active_dwell + 1;
1059
1060 channel = iwl_get_single_channel_number(priv, band);
1061 if (channel) {
1062 scan_ch->channel = cpu_to_le16(channel);
1063 scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
1064 scan_ch->active_dwell = cpu_to_le16(active_dwell);
1065 scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
1066 /* Set txpower levels to defaults */
1067 scan_ch->dsp_atten = 110;
1068 if (band == IEEE80211_BAND_5GHZ)
1069 scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
1070 else
1071 scan_ch->tx_gain = ((1 << 5) | (5 << 3));
1072 added++;
1073 } else
1074 IWL_ERR(priv, "no valid channel found\n");
1075 return added;
1076 }
1077
1078 static int iwl_get_channels_for_scan(struct iwl_priv *priv,
1079 struct ieee80211_vif *vif,
1080 enum ieee80211_band band,
1081 u8 is_active, u8 n_probes,
1082 struct iwl_scan_channel *scan_ch)
1083 {
1084 struct ieee80211_channel *chan;
1085 const struct ieee80211_supported_band *sband;
1086 const struct iwl_channel_info *ch_info;
1087 u16 passive_dwell = 0;
1088 u16 active_dwell = 0;
1089 int added, i;
1090 u16 channel;
1091
1092 sband = iwl_get_hw_mode(priv, band);
1093 if (!sband)
1094 return 0;
1095
1096 active_dwell = iwl_get_active_dwell_time(priv, band, n_probes);
1097 passive_dwell = iwl_get_passive_dwell_time(priv, band, vif);
1098
1099 if (passive_dwell <= active_dwell)
1100 passive_dwell = active_dwell + 1;
1101
1102 for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) {
1103 chan = priv->scan_request->channels[i];
1104
1105 if (chan->band != band)
1106 continue;
1107
1108 channel = chan->hw_value;
1109 scan_ch->channel = cpu_to_le16(channel);
1110
1111 ch_info = iwl_get_channel_info(priv, band, channel);
1112 if (!is_channel_valid(ch_info)) {
1113 IWL_DEBUG_SCAN(priv, "Channel %d is INVALID for this band.\n",
1114 channel);
1115 continue;
1116 }
1117
1118 if (!is_active || is_channel_passive(ch_info) ||
1119 (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN))
1120 scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
1121 else
1122 scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE;
1123
1124 if (n_probes)
1125 scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes);
1126
1127 scan_ch->active_dwell = cpu_to_le16(active_dwell);
1128 scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
1129
1130 /* Set txpower levels to defaults */
1131 scan_ch->dsp_atten = 110;
1132
1133 /* NOTE: if we were doing 6Mb OFDM for scans we'd use
1134 * power level:
1135 * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
1136 */
1137 if (band == IEEE80211_BAND_5GHZ)
1138 scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
1139 else
1140 scan_ch->tx_gain = ((1 << 5) | (5 << 3));
1141
1142 IWL_DEBUG_SCAN(priv, "Scanning ch=%d prob=0x%X [%s %d]\n",
1143 channel, le32_to_cpu(scan_ch->type),
1144 (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
1145 "ACTIVE" : "PASSIVE",
1146 (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
1147 active_dwell : passive_dwell);
1148
1149 scan_ch++;
1150 added++;
1151 }
1152
1153 IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added);
1154 return added;
1155 }
1156
1157 void iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
1158 {
1159 struct iwl_host_cmd cmd = {
1160 .id = REPLY_SCAN_CMD,
1161 .len = sizeof(struct iwl_scan_cmd),
1162 .flags = CMD_SIZE_HUGE,
1163 };
1164 struct iwl_scan_cmd *scan;
1165 struct ieee80211_conf *conf = NULL;
1166 u32 rate_flags = 0;
1167 u16 cmd_len;
1168 u16 rx_chain = 0;
1169 enum ieee80211_band band;
1170 u8 n_probes = 0;
1171 u8 rx_ant = priv->hw_params.valid_rx_ant;
1172 u8 rate;
1173 bool is_active = false;
1174 int chan_mod;
1175 u8 active_chains;
1176 u8 scan_tx_antennas = priv->hw_params.valid_tx_ant;
1177
1178 conf = ieee80211_get_hw_conf(priv->hw);
1179
1180 cancel_delayed_work(&priv->scan_check);
1181
1182 if (!iwl_is_ready(priv)) {
1183 IWL_WARN(priv, "request scan called when driver not ready.\n");
1184 goto done;
1185 }
1186
1187 /* Make sure the scan wasn't canceled before this queued work
1188 * was given the chance to run... */
1189 if (!test_bit(STATUS_SCANNING, &priv->status))
1190 goto done;
1191
1192 /* This should never be called or scheduled if there is currently
1193 * a scan active in the hardware. */
1194 if (test_bit(STATUS_SCAN_HW, &priv->status)) {
1195 IWL_DEBUG_INFO(priv, "Multiple concurrent scan requests in parallel. "
1196 "Ignoring second request.\n");
1197 goto done;
1198 }
1199
1200 if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
1201 IWL_DEBUG_SCAN(priv, "Aborting scan due to device shutdown\n");
1202 goto done;
1203 }
1204
1205 if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
1206 IWL_DEBUG_HC(priv, "Scan request while abort pending. Queuing.\n");
1207 goto done;
1208 }
1209
1210 if (iwl_is_rfkill(priv)) {
1211 IWL_DEBUG_HC(priv, "Aborting scan due to RF Kill activation\n");
1212 goto done;
1213 }
1214
1215 if (!test_bit(STATUS_READY, &priv->status)) {
1216 IWL_DEBUG_HC(priv, "Scan request while uninitialized. Queuing.\n");
1217 goto done;
1218 }
1219
1220 if (!priv->scan_cmd) {
1221 priv->scan_cmd = kmalloc(sizeof(struct iwl_scan_cmd) +
1222 IWL_MAX_SCAN_SIZE, GFP_KERNEL);
1223 if (!priv->scan_cmd) {
1224 IWL_DEBUG_SCAN(priv,
1225 "fail to allocate memory for scan\n");
1226 goto done;
1227 }
1228 }
1229 scan = priv->scan_cmd;
1230 memset(scan, 0, sizeof(struct iwl_scan_cmd) + IWL_MAX_SCAN_SIZE);
1231
1232 scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH;
1233 scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
1234
1235 if (iwl_is_any_associated(priv)) {
1236 u16 interval = 0;
1237 u32 extra;
1238 u32 suspend_time = 100;
1239 u32 scan_suspend_time = 100;
1240 unsigned long flags;
1241
1242 IWL_DEBUG_INFO(priv, "Scanning while associated...\n");
1243 spin_lock_irqsave(&priv->lock, flags);
1244 if (priv->is_internal_short_scan)
1245 interval = 0;
1246 else
1247 interval = vif->bss_conf.beacon_int;
1248 spin_unlock_irqrestore(&priv->lock, flags);
1249
1250 scan->suspend_time = 0;
1251 scan->max_out_time = cpu_to_le32(200 * 1024);
1252 if (!interval)
1253 interval = suspend_time;
1254
1255 extra = (suspend_time / interval) << 22;
1256 scan_suspend_time = (extra |
1257 ((suspend_time % interval) * 1024));
1258 scan->suspend_time = cpu_to_le32(scan_suspend_time);
1259 IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n",
1260 scan_suspend_time, interval);
1261 }
1262
1263 if (priv->is_internal_short_scan) {
1264 IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n");
1265 } else if (priv->scan_request->n_ssids) {
1266 int i, p = 0;
1267 IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
1268 for (i = 0; i < priv->scan_request->n_ssids; i++) {
1269 /* always does wildcard anyway */
1270 if (!priv->scan_request->ssids[i].ssid_len)
1271 continue;
1272 scan->direct_scan[p].id = WLAN_EID_SSID;
1273 scan->direct_scan[p].len =
1274 priv->scan_request->ssids[i].ssid_len;
1275 memcpy(scan->direct_scan[p].ssid,
1276 priv->scan_request->ssids[i].ssid,
1277 priv->scan_request->ssids[i].ssid_len);
1278 n_probes++;
1279 p++;
1280 }
1281 is_active = true;
1282 } else
1283 IWL_DEBUG_SCAN(priv, "Start passive scan.\n");
1284
1285 scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
1286 scan->tx_cmd.sta_id = priv->hw_params.bcast_sta_id;
1287 scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
1288
1289 switch (priv->scan_band) {
1290 case IEEE80211_BAND_2GHZ:
1291 scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
1292 chan_mod = le32_to_cpu(
1293 priv->contexts[IWL_RXON_CTX_BSS].active.flags &
1294 RXON_FLG_CHANNEL_MODE_MSK)
1295 >> RXON_FLG_CHANNEL_MODE_POS;
1296 if (chan_mod == CHANNEL_MODE_PURE_40) {
1297 rate = IWL_RATE_6M_PLCP;
1298 } else {
1299 rate = IWL_RATE_1M_PLCP;
1300 rate_flags = RATE_MCS_CCK_MSK;
1301 }
1302 /*
1303 * Internal scans are passive, so we can indiscriminately set
1304 * the BT ignore flag on 2.4 GHz since it applies to TX only.
1305 */
1306 if (priv->cfg->advanced_bt_coexist)
1307 scan->tx_cmd.tx_flags |= TX_CMD_FLG_IGNORE_BT;
1308 scan->good_CRC_th = IWL_GOOD_CRC_TH_DISABLED;
1309 break;
1310 case IEEE80211_BAND_5GHZ:
1311 rate = IWL_RATE_6M_PLCP;
1312 /*
1313 * If active scanning is requested but a certain channel is
1314 * marked passive, we can do active scanning if we detect
1315 * transmissions.
1316 *
1317 * There is an issue with some firmware versions that triggers
1318 * a sysassert on a "good CRC threshold" of zero (== disabled),
1319 * on a radar channel even though this means that we should NOT
1320 * send probes.
1321 *
1322 * The "good CRC threshold" is the number of frames that we
1323 * need to receive during our dwell time on a channel before
1324 * sending out probes -- setting this to a huge value will
1325 * mean we never reach it, but at the same time work around
1326 * the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER
1327 * here instead of IWL_GOOD_CRC_TH_DISABLED.
1328 */
1329 scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
1330 IWL_GOOD_CRC_TH_NEVER;
1331 break;
1332 default:
1333 IWL_WARN(priv, "Invalid scan band count\n");
1334 goto done;
1335 }
1336
1337 band = priv->scan_band;
1338
1339 if (priv->cfg->scan_rx_antennas[band])
1340 rx_ant = priv->cfg->scan_rx_antennas[band];
1341
1342 if (priv->cfg->scan_tx_antennas[band])
1343 scan_tx_antennas = priv->cfg->scan_tx_antennas[band];
1344
1345 if (priv->cfg->advanced_bt_coexist && priv->bt_full_concurrent) {
1346 /* operated as 1x1 in full concurrency mode */
1347 scan_tx_antennas =
1348 first_antenna(priv->cfg->scan_tx_antennas[band]);
1349 }
1350
1351 priv->scan_tx_ant[band] = iwl_toggle_tx_ant(priv, priv->scan_tx_ant[band],
1352 scan_tx_antennas);
1353 rate_flags |= iwl_ant_idx_to_flags(priv->scan_tx_ant[band]);
1354 scan->tx_cmd.rate_n_flags = iwl_hw_set_rate_n_flags(rate, rate_flags);
1355
1356 /* In power save mode use one chain, otherwise use all chains */
1357 if (test_bit(STATUS_POWER_PMI, &priv->status)) {
1358 /* rx_ant has been set to all valid chains previously */
1359 active_chains = rx_ant &
1360 ((u8)(priv->chain_noise_data.active_chains));
1361 if (!active_chains)
1362 active_chains = rx_ant;
1363
1364 IWL_DEBUG_SCAN(priv, "chain_noise_data.active_chains: %u\n",
1365 priv->chain_noise_data.active_chains);
1366
1367 rx_ant = first_antenna(active_chains);
1368 }
1369 if (priv->cfg->advanced_bt_coexist && priv->bt_full_concurrent) {
1370 /* operated as 1x1 in full concurrency mode */
1371 rx_ant = first_antenna(rx_ant);
1372 }
1373
1374 /* MIMO is not used here, but value is required */
1375 rx_chain |= priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS;
1376 rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
1377 rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS;
1378 rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
1379 scan->rx_chain = cpu_to_le16(rx_chain);
1380 if (!priv->is_internal_short_scan) {
1381 cmd_len = iwl_fill_probe_req(priv,
1382 (struct ieee80211_mgmt *)scan->data,
1383 vif->addr,
1384 priv->scan_request->ie,
1385 priv->scan_request->ie_len,
1386 IWL_MAX_SCAN_SIZE - sizeof(*scan));
1387 } else {
1388 /* use bcast addr, will not be transmitted but must be valid */
1389 cmd_len = iwl_fill_probe_req(priv,
1390 (struct ieee80211_mgmt *)scan->data,
1391 iwl_bcast_addr, NULL, 0,
1392 IWL_MAX_SCAN_SIZE - sizeof(*scan));
1393
1394 }
1395 scan->tx_cmd.len = cpu_to_le16(cmd_len);
1396
1397 scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK |
1398 RXON_FILTER_BCON_AWARE_MSK);
1399
1400 if (priv->is_internal_short_scan) {
1401 scan->channel_count =
1402 iwl_get_single_channel_for_scan(priv, vif, band,
1403 (void *)&scan->data[le16_to_cpu(
1404 scan->tx_cmd.len)]);
1405 } else {
1406 scan->channel_count =
1407 iwl_get_channels_for_scan(priv, vif, band,
1408 is_active, n_probes,
1409 (void *)&scan->data[le16_to_cpu(
1410 scan->tx_cmd.len)]);
1411 }
1412 if (scan->channel_count == 0) {
1413 IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);
1414 goto done;
1415 }
1416
1417 cmd.len += le16_to_cpu(scan->tx_cmd.len) +
1418 scan->channel_count * sizeof(struct iwl_scan_channel);
1419 cmd.data = scan;
1420 scan->len = cpu_to_le16(cmd.len);
1421
1422 set_bit(STATUS_SCAN_HW, &priv->status);
1423 if (iwl_send_cmd_sync(priv, &cmd))
1424 goto done;
1425
1426 queue_delayed_work(priv->workqueue, &priv->scan_check,
1427 IWL_SCAN_CHECK_WATCHDOG);
1428
1429 return;
1430
1431 done:
1432 /* Cannot perform scan. Make sure we clear scanning
1433 * bits from status so next scan request can be performed.
1434 * If we don't clear scanning status bit here all next scan
1435 * will fail
1436 */
1437 clear_bit(STATUS_SCAN_HW, &priv->status);
1438 clear_bit(STATUS_SCANNING, &priv->status);
1439 /* inform mac80211 scan aborted */
1440 queue_work(priv->workqueue, &priv->scan_completed);
1441 }
1442
1443 int iwlagn_manage_ibss_station(struct iwl_priv *priv,
1444 struct ieee80211_vif *vif, bool add)
1445 {
1446 struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
1447
1448 if (add)
1449 return iwl_add_bssid_station(priv, vif->bss_conf.bssid, true,
1450 &vif_priv->ibss_bssid_sta_id);
1451 return iwl_remove_station(priv, vif_priv->ibss_bssid_sta_id,
1452 vif->bss_conf.bssid);
1453 }
1454
1455 void iwl_free_tfds_in_queue(struct iwl_priv *priv,
1456 int sta_id, int tid, int freed)
1457 {
1458 lockdep_assert_held(&priv->sta_lock);
1459
1460 if (priv->stations[sta_id].tid[tid].tfds_in_queue >= freed)
1461 priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
1462 else {
1463 IWL_DEBUG_TX(priv, "free more than tfds_in_queue (%u:%d)\n",
1464 priv->stations[sta_id].tid[tid].tfds_in_queue,
1465 freed);
1466 priv->stations[sta_id].tid[tid].tfds_in_queue = 0;
1467 }
1468 }
1469
1470 #define IWL_FLUSH_WAIT_MS 2000
1471
1472 int iwlagn_wait_tx_queue_empty(struct iwl_priv *priv)
1473 {
1474 struct iwl_tx_queue *txq;
1475 struct iwl_queue *q;
1476 int cnt;
1477 unsigned long now = jiffies;
1478 int ret = 0;
1479
1480 /* waiting for all the tx frames complete might take a while */
1481 for (cnt = 0; cnt < priv->hw_params.max_txq_num; cnt++) {
1482 if (cnt == IWL_CMD_QUEUE_NUM)
1483 continue;
1484 txq = &priv->txq[cnt];
1485 q = &txq->q;
1486 while (q->read_ptr != q->write_ptr && !time_after(jiffies,
1487 now + msecs_to_jiffies(IWL_FLUSH_WAIT_MS)))
1488 msleep(1);
1489
1490 if (q->read_ptr != q->write_ptr) {
1491 IWL_ERR(priv, "fail to flush all tx fifo queues\n");
1492 ret = -ETIMEDOUT;
1493 break;
1494 }
1495 }
1496 return ret;
1497 }
1498
1499 #define IWL_TX_QUEUE_MSK 0xfffff
1500
1501 /**
1502 * iwlagn_txfifo_flush: send REPLY_TXFIFO_FLUSH command to uCode
1503 *
1504 * pre-requirements:
1505 * 1. acquire mutex before calling
1506 * 2. make sure rf is on and not in exit state
1507 */
1508 int iwlagn_txfifo_flush(struct iwl_priv *priv, u16 flush_control)
1509 {
1510 struct iwl_txfifo_flush_cmd flush_cmd;
1511 struct iwl_host_cmd cmd = {
1512 .id = REPLY_TXFIFO_FLUSH,
1513 .len = sizeof(struct iwl_txfifo_flush_cmd),
1514 .flags = CMD_SYNC,
1515 .data = &flush_cmd,
1516 };
1517
1518 might_sleep();
1519
1520 memset(&flush_cmd, 0, sizeof(flush_cmd));
1521 flush_cmd.fifo_control = IWL_TX_FIFO_VO_MSK | IWL_TX_FIFO_VI_MSK |
1522 IWL_TX_FIFO_BE_MSK | IWL_TX_FIFO_BK_MSK;
1523 if (priv->cfg->sku & IWL_SKU_N)
1524 flush_cmd.fifo_control |= IWL_AGG_TX_QUEUE_MSK;
1525
1526 IWL_DEBUG_INFO(priv, "fifo queue control: 0X%x\n",
1527 flush_cmd.fifo_control);
1528 flush_cmd.flush_control = cpu_to_le16(flush_control);
1529
1530 return iwl_send_cmd(priv, &cmd);
1531 }
1532
1533 void iwlagn_dev_txfifo_flush(struct iwl_priv *priv, u16 flush_control)
1534 {
1535 mutex_lock(&priv->mutex);
1536 ieee80211_stop_queues(priv->hw);
1537 if (priv->cfg->ops->lib->txfifo_flush(priv, IWL_DROP_ALL)) {
1538 IWL_ERR(priv, "flush request fail\n");
1539 goto done;
1540 }
1541 IWL_DEBUG_INFO(priv, "wait transmit/flush all frames\n");
1542 iwlagn_wait_tx_queue_empty(priv);
1543 done:
1544 ieee80211_wake_queues(priv->hw);
1545 mutex_unlock(&priv->mutex);
1546 }
1547
1548 /*
1549 * BT coex
1550 */
1551 /*
1552 * Macros to access the lookup table.
1553 *
1554 * The lookup table has 7 inputs: bt3_prio, bt3_txrx, bt_rf_act, wifi_req,
1555 * wifi_prio, wifi_txrx and wifi_sh_ant_req.
1556 *
1557 * It has three outputs: WLAN_ACTIVE, WLAN_KILL and ANT_SWITCH
1558 *
1559 * The format is that "registers" 8 through 11 contain the WLAN_ACTIVE bits
1560 * one after another in 32-bit registers, and "registers" 0 through 7 contain
1561 * the WLAN_KILL and ANT_SWITCH bits interleaved (in that order).
1562 *
1563 * These macros encode that format.
1564 */
1565 #define LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, wifi_req, wifi_prio, \
1566 wifi_txrx, wifi_sh_ant_req) \
1567 (bt3_prio | (bt3_txrx << 1) | (bt_rf_act << 2) | (wifi_req << 3) | \
1568 (wifi_prio << 4) | (wifi_txrx << 5) | (wifi_sh_ant_req << 6))
1569
1570 #define LUT_PTA_WLAN_ACTIVE_OP(lut, op, val) \
1571 lut[8 + ((val) >> 5)] op (cpu_to_le32(BIT((val) & 0x1f)))
1572 #define LUT_TEST_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1573 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1574 (!!(LUT_PTA_WLAN_ACTIVE_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, \
1575 bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \
1576 wifi_sh_ant_req))))
1577 #define LUT_SET_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1578 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1579 LUT_PTA_WLAN_ACTIVE_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, \
1580 bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \
1581 wifi_sh_ant_req))
1582 #define LUT_CLEAR_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, \
1583 wifi_req, wifi_prio, wifi_txrx, \
1584 wifi_sh_ant_req) \
1585 LUT_PTA_WLAN_ACTIVE_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, \
1586 bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \
1587 wifi_sh_ant_req))
1588
1589 #define LUT_WLAN_KILL_OP(lut, op, val) \
1590 lut[(val) >> 4] op (cpu_to_le32(BIT(((val) << 1) & 0x1e)))
1591 #define LUT_TEST_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1592 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1593 (!!(LUT_WLAN_KILL_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1594 wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))))
1595 #define LUT_SET_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1596 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1597 LUT_WLAN_KILL_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1598 wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
1599 #define LUT_CLEAR_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1600 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1601 LUT_WLAN_KILL_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1602 wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
1603
1604 #define LUT_ANT_SWITCH_OP(lut, op, val) \
1605 lut[(val) >> 4] op (cpu_to_le32(BIT((((val) << 1) & 0x1e) + 1)))
1606 #define LUT_TEST_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1607 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1608 (!!(LUT_ANT_SWITCH_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1609 wifi_req, wifi_prio, wifi_txrx, \
1610 wifi_sh_ant_req))))
1611 #define LUT_SET_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1612 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1613 LUT_ANT_SWITCH_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1614 wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
1615 #define LUT_CLEAR_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1616 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1617 LUT_ANT_SWITCH_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1618 wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
1619
1620 static const __le32 iwlagn_def_3w_lookup[12] = {
1621 cpu_to_le32(0xaaaaaaaa),
1622 cpu_to_le32(0xaaaaaaaa),
1623 cpu_to_le32(0xaeaaaaaa),
1624 cpu_to_le32(0xaaaaaaaa),
1625 cpu_to_le32(0xcc00ff28),
1626 cpu_to_le32(0x0000aaaa),
1627 cpu_to_le32(0xcc00aaaa),
1628 cpu_to_le32(0x0000aaaa),
1629 cpu_to_le32(0xc0004000),
1630 cpu_to_le32(0x00004000),
1631 cpu_to_le32(0xf0005000),
1632 cpu_to_le32(0xf0004000),
1633 };
1634
1635 static const __le32 iwlagn_concurrent_lookup[12] = {
1636 cpu_to_le32(0xaaaaaaaa),
1637 cpu_to_le32(0xaaaaaaaa),
1638 cpu_to_le32(0xaaaaaaaa),
1639 cpu_to_le32(0xaaaaaaaa),
1640 cpu_to_le32(0xaaaaaaaa),
1641 cpu_to_le32(0xaaaaaaaa),
1642 cpu_to_le32(0xaaaaaaaa),
1643 cpu_to_le32(0xaaaaaaaa),
1644 cpu_to_le32(0x00000000),
1645 cpu_to_le32(0x00000000),
1646 cpu_to_le32(0x00000000),
1647 cpu_to_le32(0x00000000),
1648 };
1649
1650 void iwlagn_send_advance_bt_config(struct iwl_priv *priv)
1651 {
1652 struct iwlagn_bt_cmd bt_cmd = {
1653 .max_kill = IWLAGN_BT_MAX_KILL_DEFAULT,
1654 .bt3_timer_t7_value = IWLAGN_BT3_T7_DEFAULT,
1655 .bt3_prio_sample_time = IWLAGN_BT3_PRIO_SAMPLE_DEFAULT,
1656 .bt3_timer_t2_value = IWLAGN_BT3_T2_DEFAULT,
1657 };
1658
1659 BUILD_BUG_ON(sizeof(iwlagn_def_3w_lookup) !=
1660 sizeof(bt_cmd.bt3_lookup_table));
1661
1662 bt_cmd.prio_boost = priv->cfg->bt_prio_boost;
1663 bt_cmd.kill_ack_mask = priv->kill_ack_mask;
1664 bt_cmd.kill_cts_mask = priv->kill_cts_mask;
1665 bt_cmd.valid = priv->bt_valid;
1666
1667 /*
1668 * Configure BT coex mode to "no coexistence" when the
1669 * user disabled BT coexistence, we have no interface
1670 * (might be in monitor mode), or the interface is in
1671 * IBSS mode (no proper uCode support for coex then).
1672 */
1673 if (!bt_coex_active || priv->iw_mode == NL80211_IFTYPE_ADHOC) {
1674 bt_cmd.flags = 0;
1675 } else {
1676 bt_cmd.flags = IWLAGN_BT_FLAG_COEX_MODE_3W <<
1677 IWLAGN_BT_FLAG_COEX_MODE_SHIFT;
1678 if (priv->bt_ch_announce)
1679 bt_cmd.flags |= IWLAGN_BT_FLAG_CHANNEL_INHIBITION;
1680 IWL_DEBUG_INFO(priv, "BT coex flag: 0X%x\n", bt_cmd.flags);
1681 }
1682 if (priv->bt_full_concurrent)
1683 memcpy(bt_cmd.bt3_lookup_table, iwlagn_concurrent_lookup,
1684 sizeof(iwlagn_concurrent_lookup));
1685 else
1686 memcpy(bt_cmd.bt3_lookup_table, iwlagn_def_3w_lookup,
1687 sizeof(iwlagn_def_3w_lookup));
1688
1689 IWL_DEBUG_INFO(priv, "BT coex %s in %s mode\n",
1690 bt_cmd.flags ? "active" : "disabled",
1691 priv->bt_full_concurrent ?
1692 "full concurrency" : "3-wire");
1693
1694 if (iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG, sizeof(bt_cmd), &bt_cmd))
1695 IWL_ERR(priv, "failed to send BT Coex Config\n");
1696
1697 /*
1698 * When we are doing a restart, need to also reconfigure BT
1699 * SCO to the device. If not doing a restart, bt_sco_active
1700 * will always be false, so there's no need to have an extra
1701 * variable to check for it.
1702 */
1703 if (priv->bt_sco_active) {
1704 struct iwlagn_bt_sco_cmd sco_cmd = { .flags = 0 };
1705
1706 if (priv->bt_sco_active)
1707 sco_cmd.flags |= IWLAGN_BT_SCO_ACTIVE;
1708 if (iwl_send_cmd_pdu(priv, REPLY_BT_COEX_SCO,
1709 sizeof(sco_cmd), &sco_cmd))
1710 IWL_ERR(priv, "failed to send BT SCO command\n");
1711 }
1712 }
1713
1714 static void iwlagn_bt_traffic_change_work(struct work_struct *work)
1715 {
1716 struct iwl_priv *priv =
1717 container_of(work, struct iwl_priv, bt_traffic_change_work);
1718 int smps_request = -1;
1719
1720 IWL_DEBUG_INFO(priv, "BT traffic load changes: %d\n",
1721 priv->bt_traffic_load);
1722
1723 switch (priv->bt_traffic_load) {
1724 case IWL_BT_COEX_TRAFFIC_LOAD_NONE:
1725 smps_request = IEEE80211_SMPS_AUTOMATIC;
1726 break;
1727 case IWL_BT_COEX_TRAFFIC_LOAD_LOW:
1728 smps_request = IEEE80211_SMPS_DYNAMIC;
1729 break;
1730 case IWL_BT_COEX_TRAFFIC_LOAD_HIGH:
1731 case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS:
1732 smps_request = IEEE80211_SMPS_STATIC;
1733 break;
1734 default:
1735 IWL_ERR(priv, "Invalid BT traffic load: %d\n",
1736 priv->bt_traffic_load);
1737 break;
1738 }
1739
1740 mutex_lock(&priv->mutex);
1741
1742 if (priv->cfg->ops->lib->update_chain_flags)
1743 priv->cfg->ops->lib->update_chain_flags(priv);
1744
1745 if (smps_request != -1 &&
1746 priv->vif && priv->vif->type == NL80211_IFTYPE_STATION)
1747 ieee80211_request_smps(priv->vif, smps_request);
1748
1749 mutex_unlock(&priv->mutex);
1750 }
1751
1752 static void iwlagn_print_uartmsg(struct iwl_priv *priv,
1753 struct iwl_bt_uart_msg *uart_msg)
1754 {
1755 IWL_DEBUG_NOTIF(priv, "Message Type = 0x%X, SSN = 0x%X, "
1756 "Update Req = 0x%X",
1757 (BT_UART_MSG_FRAME1MSGTYPE_MSK & uart_msg->frame1) >>
1758 BT_UART_MSG_FRAME1MSGTYPE_POS,
1759 (BT_UART_MSG_FRAME1SSN_MSK & uart_msg->frame1) >>
1760 BT_UART_MSG_FRAME1SSN_POS,
1761 (BT_UART_MSG_FRAME1UPDATEREQ_MSK & uart_msg->frame1) >>
1762 BT_UART_MSG_FRAME1UPDATEREQ_POS);
1763
1764 IWL_DEBUG_NOTIF(priv, "Open connections = 0x%X, Traffic load = 0x%X, "
1765 "Chl_SeqN = 0x%X, In band = 0x%X",
1766 (BT_UART_MSG_FRAME2OPENCONNECTIONS_MSK & uart_msg->frame2) >>
1767 BT_UART_MSG_FRAME2OPENCONNECTIONS_POS,
1768 (BT_UART_MSG_FRAME2TRAFFICLOAD_MSK & uart_msg->frame2) >>
1769 BT_UART_MSG_FRAME2TRAFFICLOAD_POS,
1770 (BT_UART_MSG_FRAME2CHLSEQN_MSK & uart_msg->frame2) >>
1771 BT_UART_MSG_FRAME2CHLSEQN_POS,
1772 (BT_UART_MSG_FRAME2INBAND_MSK & uart_msg->frame2) >>
1773 BT_UART_MSG_FRAME2INBAND_POS);
1774
1775 IWL_DEBUG_NOTIF(priv, "SCO/eSCO = 0x%X, Sniff = 0x%X, A2DP = 0x%X, "
1776 "ACL = 0x%X, Master = 0x%X, OBEX = 0x%X",
1777 (BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3) >>
1778 BT_UART_MSG_FRAME3SCOESCO_POS,
1779 (BT_UART_MSG_FRAME3SNIFF_MSK & uart_msg->frame3) >>
1780 BT_UART_MSG_FRAME3SNIFF_POS,
1781 (BT_UART_MSG_FRAME3A2DP_MSK & uart_msg->frame3) >>
1782 BT_UART_MSG_FRAME3A2DP_POS,
1783 (BT_UART_MSG_FRAME3ACL_MSK & uart_msg->frame3) >>
1784 BT_UART_MSG_FRAME3ACL_POS,
1785 (BT_UART_MSG_FRAME3MASTER_MSK & uart_msg->frame3) >>
1786 BT_UART_MSG_FRAME3MASTER_POS,
1787 (BT_UART_MSG_FRAME3OBEX_MSK & uart_msg->frame3) >>
1788 BT_UART_MSG_FRAME3OBEX_POS);
1789
1790 IWL_DEBUG_NOTIF(priv, "Idle duration = 0x%X",
1791 (BT_UART_MSG_FRAME4IDLEDURATION_MSK & uart_msg->frame4) >>
1792 BT_UART_MSG_FRAME4IDLEDURATION_POS);
1793
1794 IWL_DEBUG_NOTIF(priv, "Tx Activity = 0x%X, Rx Activity = 0x%X, "
1795 "eSCO Retransmissions = 0x%X",
1796 (BT_UART_MSG_FRAME5TXACTIVITY_MSK & uart_msg->frame5) >>
1797 BT_UART_MSG_FRAME5TXACTIVITY_POS,
1798 (BT_UART_MSG_FRAME5RXACTIVITY_MSK & uart_msg->frame5) >>
1799 BT_UART_MSG_FRAME5RXACTIVITY_POS,
1800 (BT_UART_MSG_FRAME5ESCORETRANSMIT_MSK & uart_msg->frame5) >>
1801 BT_UART_MSG_FRAME5ESCORETRANSMIT_POS);
1802
1803 IWL_DEBUG_NOTIF(priv, "Sniff Interval = 0x%X, Discoverable = 0x%X",
1804 (BT_UART_MSG_FRAME6SNIFFINTERVAL_MSK & uart_msg->frame6) >>
1805 BT_UART_MSG_FRAME6SNIFFINTERVAL_POS,
1806 (BT_UART_MSG_FRAME6DISCOVERABLE_MSK & uart_msg->frame6) >>
1807 BT_UART_MSG_FRAME6DISCOVERABLE_POS);
1808
1809 IWL_DEBUG_NOTIF(priv, "Sniff Activity = 0x%X, Inquiry/Page SR Mode = "
1810 "0x%X, Connectable = 0x%X",
1811 (BT_UART_MSG_FRAME7SNIFFACTIVITY_MSK & uart_msg->frame7) >>
1812 BT_UART_MSG_FRAME7SNIFFACTIVITY_POS,
1813 (BT_UART_MSG_FRAME7INQUIRYPAGESRMODE_MSK & uart_msg->frame7) >>
1814 BT_UART_MSG_FRAME7INQUIRYPAGESRMODE_POS,
1815 (BT_UART_MSG_FRAME7CONNECTABLE_MSK & uart_msg->frame7) >>
1816 BT_UART_MSG_FRAME7CONNECTABLE_POS);
1817 }
1818
1819 static void iwlagn_set_kill_ack_msk(struct iwl_priv *priv,
1820 struct iwl_bt_uart_msg *uart_msg)
1821 {
1822 u8 kill_ack_msk;
1823 __le32 bt_kill_ack_msg[2] = {
1824 cpu_to_le32(0xFFFFFFF), cpu_to_le32(0xFFFFFC00) };
1825
1826 kill_ack_msk = (((BT_UART_MSG_FRAME3A2DP_MSK |
1827 BT_UART_MSG_FRAME3SNIFF_MSK |
1828 BT_UART_MSG_FRAME3SCOESCO_MSK) &
1829 uart_msg->frame3) == 0) ? 1 : 0;
1830 if (priv->kill_ack_mask != bt_kill_ack_msg[kill_ack_msk]) {
1831 priv->bt_valid |= IWLAGN_BT_VALID_KILL_ACK_MASK;
1832 priv->kill_ack_mask = bt_kill_ack_msg[kill_ack_msk];
1833 /* schedule to send runtime bt_config */
1834 queue_work(priv->workqueue, &priv->bt_runtime_config);
1835 }
1836
1837 }
1838
1839 void iwlagn_bt_coex_profile_notif(struct iwl_priv *priv,
1840 struct iwl_rx_mem_buffer *rxb)
1841 {
1842 unsigned long flags;
1843 struct iwl_rx_packet *pkt = rxb_addr(rxb);
1844 struct iwl_bt_coex_profile_notif *coex = &pkt->u.bt_coex_profile_notif;
1845 struct iwlagn_bt_sco_cmd sco_cmd = { .flags = 0 };
1846 struct iwl_bt_uart_msg *uart_msg = &coex->last_bt_uart_msg;
1847 u8 last_traffic_load;
1848
1849 IWL_DEBUG_NOTIF(priv, "BT Coex notification:\n");
1850 IWL_DEBUG_NOTIF(priv, " status: %d\n", coex->bt_status);
1851 IWL_DEBUG_NOTIF(priv, " traffic load: %d\n", coex->bt_traffic_load);
1852 IWL_DEBUG_NOTIF(priv, " CI compliance: %d\n",
1853 coex->bt_ci_compliance);
1854 iwlagn_print_uartmsg(priv, uart_msg);
1855
1856 last_traffic_load = priv->notif_bt_traffic_load;
1857 priv->notif_bt_traffic_load = coex->bt_traffic_load;
1858 if (priv->iw_mode != NL80211_IFTYPE_ADHOC) {
1859 if (priv->bt_status != coex->bt_status ||
1860 last_traffic_load != coex->bt_traffic_load) {
1861 if (coex->bt_status) {
1862 /* BT on */
1863 if (!priv->bt_ch_announce)
1864 priv->bt_traffic_load =
1865 IWL_BT_COEX_TRAFFIC_LOAD_HIGH;
1866 else
1867 priv->bt_traffic_load =
1868 coex->bt_traffic_load;
1869 } else {
1870 /* BT off */
1871 priv->bt_traffic_load =
1872 IWL_BT_COEX_TRAFFIC_LOAD_NONE;
1873 }
1874 priv->bt_status = coex->bt_status;
1875 queue_work(priv->workqueue,
1876 &priv->bt_traffic_change_work);
1877 }
1878 if (priv->bt_sco_active !=
1879 (uart_msg->frame3 & BT_UART_MSG_FRAME3SCOESCO_MSK)) {
1880 priv->bt_sco_active = uart_msg->frame3 &
1881 BT_UART_MSG_FRAME3SCOESCO_MSK;
1882 if (priv->bt_sco_active)
1883 sco_cmd.flags |= IWLAGN_BT_SCO_ACTIVE;
1884 iwl_send_cmd_pdu_async(priv, REPLY_BT_COEX_SCO,
1885 sizeof(sco_cmd), &sco_cmd, NULL);
1886 }
1887 }
1888
1889 iwlagn_set_kill_ack_msk(priv, uart_msg);
1890
1891 /* FIXME: based on notification, adjust the prio_boost */
1892
1893 spin_lock_irqsave(&priv->lock, flags);
1894 priv->bt_ci_compliance = coex->bt_ci_compliance;
1895 spin_unlock_irqrestore(&priv->lock, flags);
1896 }
1897
1898 void iwlagn_bt_rx_handler_setup(struct iwl_priv *priv)
1899 {
1900 iwlagn_rx_handler_setup(priv);
1901 priv->rx_handlers[REPLY_BT_COEX_PROFILE_NOTIF] =
1902 iwlagn_bt_coex_profile_notif;
1903 }
1904
1905 void iwlagn_bt_setup_deferred_work(struct iwl_priv *priv)
1906 {
1907 iwlagn_setup_deferred_work(priv);
1908
1909 INIT_WORK(&priv->bt_traffic_change_work,
1910 iwlagn_bt_traffic_change_work);
1911 }
1912
1913 void iwlagn_bt_cancel_deferred_work(struct iwl_priv *priv)
1914 {
1915 cancel_work_sync(&priv->bt_traffic_change_work);
1916 }
This page took 0.108905 seconds and 5 git commands to generate.