1 /******************************************************************************
5 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of version 2 of the GNU General Public License as
9 * published by the Free Software Foundation.
11 * This program is distributed in the hope that it will be useful, but
12 * WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 * General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
21 * The full GNU General Public License is included in this distribution
22 * in the file called LICENSE.GPL.
24 * Contact Information:
25 * Intel Linux Wireless <ilw@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
28 *****************************************************************************/
29 #include <linux/etherdevice.h>
30 #include <linux/kernel.h>
31 #include <linux/module.h>
32 #include <linux/init.h>
33 #include <linux/sched.h>
38 #include "iwl-helpers.h"
39 #include "iwl-agn-hw.h"
42 #include "iwl-trans.h"
44 static inline u32
iwlagn_get_scd_ssn(struct iwlagn_tx_resp
*tx_resp
)
46 return le32_to_cpup((__le32
*)&tx_resp
->status
+
47 tx_resp
->frame_count
) & MAX_SN
;
50 static void iwlagn_count_tx_err_status(struct iwl_priv
*priv
, u16 status
)
52 status
&= TX_STATUS_MSK
;
55 case TX_STATUS_POSTPONE_DELAY
:
56 priv
->_agn
.reply_tx_stats
.pp_delay
++;
58 case TX_STATUS_POSTPONE_FEW_BYTES
:
59 priv
->_agn
.reply_tx_stats
.pp_few_bytes
++;
61 case TX_STATUS_POSTPONE_BT_PRIO
:
62 priv
->_agn
.reply_tx_stats
.pp_bt_prio
++;
64 case TX_STATUS_POSTPONE_QUIET_PERIOD
:
65 priv
->_agn
.reply_tx_stats
.pp_quiet_period
++;
67 case TX_STATUS_POSTPONE_CALC_TTAK
:
68 priv
->_agn
.reply_tx_stats
.pp_calc_ttak
++;
70 case TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY
:
71 priv
->_agn
.reply_tx_stats
.int_crossed_retry
++;
73 case TX_STATUS_FAIL_SHORT_LIMIT
:
74 priv
->_agn
.reply_tx_stats
.short_limit
++;
76 case TX_STATUS_FAIL_LONG_LIMIT
:
77 priv
->_agn
.reply_tx_stats
.long_limit
++;
79 case TX_STATUS_FAIL_FIFO_UNDERRUN
:
80 priv
->_agn
.reply_tx_stats
.fifo_underrun
++;
82 case TX_STATUS_FAIL_DRAIN_FLOW
:
83 priv
->_agn
.reply_tx_stats
.drain_flow
++;
85 case TX_STATUS_FAIL_RFKILL_FLUSH
:
86 priv
->_agn
.reply_tx_stats
.rfkill_flush
++;
88 case TX_STATUS_FAIL_LIFE_EXPIRE
:
89 priv
->_agn
.reply_tx_stats
.life_expire
++;
91 case TX_STATUS_FAIL_DEST_PS
:
92 priv
->_agn
.reply_tx_stats
.dest_ps
++;
94 case TX_STATUS_FAIL_HOST_ABORTED
:
95 priv
->_agn
.reply_tx_stats
.host_abort
++;
97 case TX_STATUS_FAIL_BT_RETRY
:
98 priv
->_agn
.reply_tx_stats
.bt_retry
++;
100 case TX_STATUS_FAIL_STA_INVALID
:
101 priv
->_agn
.reply_tx_stats
.sta_invalid
++;
103 case TX_STATUS_FAIL_FRAG_DROPPED
:
104 priv
->_agn
.reply_tx_stats
.frag_drop
++;
106 case TX_STATUS_FAIL_TID_DISABLE
:
107 priv
->_agn
.reply_tx_stats
.tid_disable
++;
109 case TX_STATUS_FAIL_FIFO_FLUSHED
:
110 priv
->_agn
.reply_tx_stats
.fifo_flush
++;
112 case TX_STATUS_FAIL_INSUFFICIENT_CF_POLL
:
113 priv
->_agn
.reply_tx_stats
.insuff_cf_poll
++;
115 case TX_STATUS_FAIL_PASSIVE_NO_RX
:
116 priv
->_agn
.reply_tx_stats
.fail_hw_drop
++;
118 case TX_STATUS_FAIL_NO_BEACON_ON_RADAR
:
119 priv
->_agn
.reply_tx_stats
.sta_color_mismatch
++;
122 priv
->_agn
.reply_tx_stats
.unknown
++;
127 static void iwlagn_count_agg_tx_err_status(struct iwl_priv
*priv
, u16 status
)
129 status
&= AGG_TX_STATUS_MSK
;
132 case AGG_TX_STATE_UNDERRUN_MSK
:
133 priv
->_agn
.reply_agg_tx_stats
.underrun
++;
135 case AGG_TX_STATE_BT_PRIO_MSK
:
136 priv
->_agn
.reply_agg_tx_stats
.bt_prio
++;
138 case AGG_TX_STATE_FEW_BYTES_MSK
:
139 priv
->_agn
.reply_agg_tx_stats
.few_bytes
++;
141 case AGG_TX_STATE_ABORT_MSK
:
142 priv
->_agn
.reply_agg_tx_stats
.abort
++;
144 case AGG_TX_STATE_LAST_SENT_TTL_MSK
:
145 priv
->_agn
.reply_agg_tx_stats
.last_sent_ttl
++;
147 case AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK
:
148 priv
->_agn
.reply_agg_tx_stats
.last_sent_try
++;
150 case AGG_TX_STATE_LAST_SENT_BT_KILL_MSK
:
151 priv
->_agn
.reply_agg_tx_stats
.last_sent_bt_kill
++;
153 case AGG_TX_STATE_SCD_QUERY_MSK
:
154 priv
->_agn
.reply_agg_tx_stats
.scd_query
++;
156 case AGG_TX_STATE_TEST_BAD_CRC32_MSK
:
157 priv
->_agn
.reply_agg_tx_stats
.bad_crc32
++;
159 case AGG_TX_STATE_RESPONSE_MSK
:
160 priv
->_agn
.reply_agg_tx_stats
.response
++;
162 case AGG_TX_STATE_DUMP_TX_MSK
:
163 priv
->_agn
.reply_agg_tx_stats
.dump_tx
++;
165 case AGG_TX_STATE_DELAY_TX_MSK
:
166 priv
->_agn
.reply_agg_tx_stats
.delay_tx
++;
169 priv
->_agn
.reply_agg_tx_stats
.unknown
++;
174 static void iwlagn_set_tx_status(struct iwl_priv
*priv
,
175 struct ieee80211_tx_info
*info
,
176 struct iwl_rxon_context
*ctx
,
177 struct iwlagn_tx_resp
*tx_resp
,
178 int txq_id
, bool is_agg
)
180 u16 status
= le16_to_cpu(tx_resp
->status
.status
);
182 info
->status
.rates
[0].count
= tx_resp
->failure_frame
+ 1;
184 info
->flags
&= ~IEEE80211_TX_CTL_AMPDU
;
185 info
->flags
|= iwl_tx_status_to_mac80211(status
);
186 iwlagn_hwrate_to_tx_control(priv
, le32_to_cpu(tx_resp
->rate_n_flags
),
188 if (!iwl_is_tx_success(status
))
189 iwlagn_count_tx_err_status(priv
, status
);
191 if (status
== TX_STATUS_FAIL_PASSIVE_NO_RX
&&
192 iwl_is_associated_ctx(ctx
) && ctx
->vif
&&
193 ctx
->vif
->type
== NL80211_IFTYPE_STATION
) {
194 ctx
->last_tx_rejected
= true;
195 iwl_stop_queue(priv
, &priv
->txq
[txq_id
]);
198 IWL_DEBUG_TX_REPLY(priv
, "TXQ %d status %s (0x%08x) rate_n_flags "
201 iwl_get_tx_fail_reason(status
), status
,
202 le32_to_cpu(tx_resp
->rate_n_flags
),
203 tx_resp
->failure_frame
);
206 #ifdef CONFIG_IWLWIFI_DEBUG
207 #define AGG_TX_STATE_FAIL(x) case AGG_TX_STATE_ ## x: return #x
209 const char *iwl_get_agg_tx_fail_reason(u16 status
)
211 status
&= AGG_TX_STATUS_MSK
;
213 case AGG_TX_STATE_TRANSMITTED
:
215 AGG_TX_STATE_FAIL(UNDERRUN_MSK
);
216 AGG_TX_STATE_FAIL(BT_PRIO_MSK
);
217 AGG_TX_STATE_FAIL(FEW_BYTES_MSK
);
218 AGG_TX_STATE_FAIL(ABORT_MSK
);
219 AGG_TX_STATE_FAIL(LAST_SENT_TTL_MSK
);
220 AGG_TX_STATE_FAIL(LAST_SENT_TRY_CNT_MSK
);
221 AGG_TX_STATE_FAIL(LAST_SENT_BT_KILL_MSK
);
222 AGG_TX_STATE_FAIL(SCD_QUERY_MSK
);
223 AGG_TX_STATE_FAIL(TEST_BAD_CRC32_MSK
);
224 AGG_TX_STATE_FAIL(RESPONSE_MSK
);
225 AGG_TX_STATE_FAIL(DUMP_TX_MSK
);
226 AGG_TX_STATE_FAIL(DELAY_TX_MSK
);
231 #endif /* CONFIG_IWLWIFI_DEBUG */
233 static int iwlagn_tx_status_reply_tx(struct iwl_priv
*priv
,
234 struct iwl_ht_agg
*agg
,
235 struct iwlagn_tx_resp
*tx_resp
,
236 int txq_id
, u16 start_idx
)
239 struct agg_tx_status
*frame_status
= &tx_resp
->status
;
240 struct ieee80211_hdr
*hdr
= NULL
;
244 if (agg
->wait_for_ba
)
245 IWL_DEBUG_TX_REPLY(priv
, "got tx response w/o block-ack\n");
247 agg
->frame_count
= tx_resp
->frame_count
;
248 agg
->start_idx
= start_idx
;
249 agg
->rate_n_flags
= le32_to_cpu(tx_resp
->rate_n_flags
);
252 /* # frames attempted by Tx command */
253 if (agg
->frame_count
== 1) {
254 struct iwl_tx_info
*txb
;
256 /* Only one frame was attempted; no block-ack will arrive */
259 IWL_DEBUG_TX_REPLY(priv
, "FrameCnt = %d, StartIdx=%d idx=%d\n",
260 agg
->frame_count
, agg
->start_idx
, idx
);
261 txb
= &priv
->txq
[txq_id
].txb
[idx
];
262 iwlagn_set_tx_status(priv
, IEEE80211_SKB_CB(txb
->skb
),
263 txb
->ctx
, tx_resp
, txq_id
, true);
264 agg
->wait_for_ba
= 0;
266 /* Two or more frames were attempted; expect block-ack */
270 * Start is the lowest frame sent. It may not be the first
271 * frame in the batch; we figure this out dynamically during
272 * the following loop.
274 int start
= agg
->start_idx
;
276 /* Construct bit-map of pending frames within Tx window */
277 for (i
= 0; i
< agg
->frame_count
; i
++) {
279 status
= le16_to_cpu(frame_status
[i
].status
);
280 seq
= le16_to_cpu(frame_status
[i
].sequence
);
281 idx
= SEQ_TO_INDEX(seq
);
282 txq_id
= SEQ_TO_QUEUE(seq
);
284 if (status
& AGG_TX_STATUS_MSK
)
285 iwlagn_count_agg_tx_err_status(priv
, status
);
287 if (status
& (AGG_TX_STATE_FEW_BYTES_MSK
|
288 AGG_TX_STATE_ABORT_MSK
))
291 IWL_DEBUG_TX_REPLY(priv
, "FrameCnt = %d, txq_id=%d idx=%d\n",
292 agg
->frame_count
, txq_id
, idx
);
293 IWL_DEBUG_TX_REPLY(priv
, "status %s (0x%08x), "
294 "try-count (0x%08x)\n",
295 iwl_get_agg_tx_fail_reason(status
),
296 status
& AGG_TX_STATUS_MSK
,
297 status
& AGG_TX_TRY_MSK
);
299 hdr
= iwl_tx_queue_get_hdr(priv
, txq_id
, idx
);
302 "BUG_ON idx doesn't point to valid skb"
303 " idx=%d, txq_id=%d\n", idx
, txq_id
);
307 sc
= le16_to_cpu(hdr
->seq_ctrl
);
308 if (idx
!= (SEQ_TO_SN(sc
) & 0xff)) {
310 "BUG_ON idx doesn't match seq control"
311 " idx=%d, seq_idx=%d, seq=%d\n",
317 IWL_DEBUG_TX_REPLY(priv
, "AGG Frame i=%d idx %d seq=%d\n",
318 i
, idx
, SEQ_TO_SN(sc
));
321 * sh -> how many frames ahead of the starting frame is
324 * Note that all frames sent in the batch must be in a
325 * 64-frame window, so this number should be in [0,63].
326 * If outside of this window, then we've found a new
327 * "first" frame in the batch and need to change start.
332 * If >= 64, out of window. start must be at the front
333 * of the circular buffer, idx must be near the end of
334 * the buffer, and idx is the new "first" frame. Shift
335 * the indices around.
338 /* Shift bitmap by start - idx, wrapped */
339 sh
= 0x100 - idx
+ start
;
340 bitmap
= bitmap
<< sh
;
341 /* Now idx is the new start so sh = 0 */
345 * If <= -64 then wraps the 256-pkt circular buffer
346 * (e.g., start = 255 and idx = 0, sh should be 1)
348 } else if (sh
<= -64) {
349 sh
= 0x100 - start
+ idx
;
351 * If < 0 but > -64, out of window. idx is before start
352 * but not wrapped. Shift the indices around.
355 /* Shift by how far start is ahead of idx */
357 bitmap
= bitmap
<< sh
;
358 /* Now idx is the new start so sh = 0 */
362 /* Sequence number start + sh was sent in this batch */
363 bitmap
|= 1ULL << sh
;
364 IWL_DEBUG_TX_REPLY(priv
, "start=%d bitmap=0x%llx\n",
365 start
, (unsigned long long)bitmap
);
369 * Store the bitmap and possibly the new start, if we wrapped
372 agg
->bitmap
= bitmap
;
373 agg
->start_idx
= start
;
374 IWL_DEBUG_TX_REPLY(priv
, "Frames %d start_idx=%d bitmap=0x%llx\n",
375 agg
->frame_count
, agg
->start_idx
,
376 (unsigned long long)agg
->bitmap
);
379 agg
->wait_for_ba
= 1;
384 void iwl_check_abort_status(struct iwl_priv
*priv
,
385 u8 frame_count
, u32 status
)
387 if (frame_count
== 1 && status
== TX_STATUS_FAIL_RFKILL_FLUSH
) {
388 IWL_ERR(priv
, "Tx flush command to flush out all frames\n");
389 if (!test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
390 queue_work(priv
->workqueue
, &priv
->tx_flush
);
394 static void iwlagn_rx_reply_tx(struct iwl_priv
*priv
,
395 struct iwl_rx_mem_buffer
*rxb
)
397 struct iwl_rx_packet
*pkt
= rxb_addr(rxb
);
398 u16 sequence
= le16_to_cpu(pkt
->hdr
.sequence
);
399 int txq_id
= SEQ_TO_QUEUE(sequence
);
400 int index
= SEQ_TO_INDEX(sequence
);
401 struct iwl_tx_queue
*txq
= &priv
->txq
[txq_id
];
402 struct ieee80211_tx_info
*info
;
403 struct iwlagn_tx_resp
*tx_resp
= (void *)&pkt
->u
.raw
[0];
404 struct iwl_tx_info
*txb
;
405 u32 status
= le16_to_cpu(tx_resp
->status
.status
);
411 if ((index
>= txq
->q
.n_bd
) || (iwl_queue_used(&txq
->q
, index
) == 0)) {
412 IWL_ERR(priv
, "%s: Read index for DMA queue txq_id (%d) "
413 "index %d is out of range [0-%d] %d %d\n", __func__
,
414 txq_id
, index
, txq
->q
.n_bd
, txq
->q
.write_ptr
,
419 txq
->time_stamp
= jiffies
;
420 txb
= &txq
->txb
[txq
->q
.read_ptr
];
421 info
= IEEE80211_SKB_CB(txb
->skb
);
422 memset(&info
->status
, 0, sizeof(info
->status
));
424 tid
= (tx_resp
->ra_tid
& IWLAGN_TX_RES_TID_MSK
) >>
425 IWLAGN_TX_RES_TID_POS
;
426 sta_id
= (tx_resp
->ra_tid
& IWLAGN_TX_RES_RA_MSK
) >>
427 IWLAGN_TX_RES_RA_POS
;
429 spin_lock_irqsave(&priv
->sta_lock
, flags
);
430 if (txq
->sched_retry
) {
431 const u32 scd_ssn
= iwlagn_get_scd_ssn(tx_resp
);
432 struct iwl_ht_agg
*agg
;
434 agg
= &priv
->stations
[sta_id
].tid
[tid
].agg
;
436 * If the BT kill count is non-zero, we'll get this
437 * notification again.
439 if (tx_resp
->bt_kill_count
&& tx_resp
->frame_count
== 1 &&
440 priv
->cfg
->bt_params
&&
441 priv
->cfg
->bt_params
->advanced_bt_coexist
) {
442 IWL_DEBUG_COEX(priv
, "receive reply tx with bt_kill\n");
444 iwlagn_tx_status_reply_tx(priv
, agg
, tx_resp
, txq_id
, index
);
446 /* check if BAR is needed */
447 if ((tx_resp
->frame_count
== 1) && !iwl_is_tx_success(status
))
448 info
->flags
|= IEEE80211_TX_STAT_AMPDU_NO_BACK
;
450 if (txq
->q
.read_ptr
!= (scd_ssn
& 0xff)) {
451 index
= iwl_queue_dec_wrap(scd_ssn
& 0xff, txq
->q
.n_bd
);
452 IWL_DEBUG_TX_REPLY(priv
, "Retry scheduler reclaim "
453 "scd_ssn=%d idx=%d txq=%d swq=%d\n",
454 scd_ssn
, index
, txq_id
, txq
->swq_id
);
456 freed
= iwlagn_tx_queue_reclaim(priv
, txq_id
, index
);
457 iwl_free_tfds_in_queue(priv
, sta_id
, tid
, freed
);
459 if (priv
->mac80211_registered
&&
460 (iwl_queue_space(&txq
->q
) > txq
->q
.low_mark
) &&
461 (agg
->state
!= IWL_EMPTYING_HW_QUEUE_DELBA
))
462 iwl_wake_queue(priv
, txq
);
465 iwlagn_set_tx_status(priv
, info
, txb
->ctx
, tx_resp
,
467 freed
= iwlagn_tx_queue_reclaim(priv
, txq_id
, index
);
468 iwl_free_tfds_in_queue(priv
, sta_id
, tid
, freed
);
470 if (priv
->mac80211_registered
&&
471 iwl_queue_space(&txq
->q
) > txq
->q
.low_mark
&&
472 status
!= TX_STATUS_FAIL_PASSIVE_NO_RX
)
473 iwl_wake_queue(priv
, txq
);
476 iwlagn_txq_check_empty(priv
, sta_id
, tid
, txq_id
);
478 iwl_check_abort_status(priv
, tx_resp
->frame_count
, status
);
479 spin_unlock_irqrestore(&priv
->sta_lock
, flags
);
482 void iwlagn_rx_handler_setup(struct iwl_priv
*priv
)
484 /* init calibration handlers */
485 priv
->rx_handlers
[CALIBRATION_RES_NOTIFICATION
] =
486 iwlagn_rx_calib_result
;
487 priv
->rx_handlers
[REPLY_TX
] = iwlagn_rx_reply_tx
;
489 /* set up notification wait support */
490 spin_lock_init(&priv
->_agn
.notif_wait_lock
);
491 INIT_LIST_HEAD(&priv
->_agn
.notif_waits
);
492 init_waitqueue_head(&priv
->_agn
.notif_waitq
);
495 void iwlagn_setup_deferred_work(struct iwl_priv
*priv
)
498 * nothing need to be done here anymore
499 * still keep for future use if needed
503 int iwlagn_hw_valid_rtc_data_addr(u32 addr
)
505 return (addr
>= IWLAGN_RTC_DATA_LOWER_BOUND
) &&
506 (addr
< IWLAGN_RTC_DATA_UPPER_BOUND
);
509 int iwlagn_send_tx_power(struct iwl_priv
*priv
)
511 struct iwlagn_tx_power_dbm_cmd tx_power_cmd
;
514 if (WARN_ONCE(test_bit(STATUS_SCAN_HW
, &priv
->status
),
515 "TX Power requested while scanning!\n"))
518 /* half dBm need to multiply */
519 tx_power_cmd
.global_lmt
= (s8
)(2 * priv
->tx_power_user_lmt
);
521 if (priv
->tx_power_lmt_in_half_dbm
&&
522 priv
->tx_power_lmt_in_half_dbm
< tx_power_cmd
.global_lmt
) {
524 * For the newer devices which using enhanced/extend tx power
525 * table in EEPROM, the format is in half dBm. driver need to
526 * convert to dBm format before report to mac80211.
527 * By doing so, there is a possibility of 1/2 dBm resolution
528 * lost. driver will perform "round-up" operation before
529 * reporting, but it will cause 1/2 dBm tx power over the
530 * regulatory limit. Perform the checking here, if the
531 * "tx_power_user_lmt" is higher than EEPROM value (in
532 * half-dBm format), lower the tx power based on EEPROM
534 tx_power_cmd
.global_lmt
= priv
->tx_power_lmt_in_half_dbm
;
536 tx_power_cmd
.flags
= IWLAGN_TX_POWER_NO_CLOSED
;
537 tx_power_cmd
.srv_chan_lmt
= IWLAGN_TX_POWER_AUTO
;
539 if (IWL_UCODE_API(priv
->ucode_ver
) == 1)
540 tx_ant_cfg_cmd
= REPLY_TX_POWER_DBM_CMD_V1
;
542 tx_ant_cfg_cmd
= REPLY_TX_POWER_DBM_CMD
;
544 return trans_send_cmd_pdu(priv
, tx_ant_cfg_cmd
, CMD_SYNC
,
545 sizeof(tx_power_cmd
), &tx_power_cmd
);
548 void iwlagn_temperature(struct iwl_priv
*priv
)
550 /* store temperature from correct statistics (in Celsius) */
551 priv
->temperature
= le32_to_cpu(priv
->statistics
.common
.temperature
);
552 iwl_tt_handler(priv
);
555 u16
iwlagn_eeprom_calib_version(struct iwl_priv
*priv
)
557 struct iwl_eeprom_calib_hdr
{
563 hdr
= (struct iwl_eeprom_calib_hdr
*)iwl_eeprom_query_addr(priv
,
572 static u32
eeprom_indirect_address(const struct iwl_priv
*priv
, u32 address
)
576 if ((address
& INDIRECT_ADDRESS
) == 0)
579 switch (address
& INDIRECT_TYPE_MSK
) {
581 offset
= iwl_eeprom_query16(priv
, EEPROM_LINK_HOST
);
583 case INDIRECT_GENERAL
:
584 offset
= iwl_eeprom_query16(priv
, EEPROM_LINK_GENERAL
);
586 case INDIRECT_REGULATORY
:
587 offset
= iwl_eeprom_query16(priv
, EEPROM_LINK_REGULATORY
);
589 case INDIRECT_TXP_LIMIT
:
590 offset
= iwl_eeprom_query16(priv
, EEPROM_LINK_TXP_LIMIT
);
592 case INDIRECT_TXP_LIMIT_SIZE
:
593 offset
= iwl_eeprom_query16(priv
, EEPROM_LINK_TXP_LIMIT_SIZE
);
595 case INDIRECT_CALIBRATION
:
596 offset
= iwl_eeprom_query16(priv
, EEPROM_LINK_CALIBRATION
);
598 case INDIRECT_PROCESS_ADJST
:
599 offset
= iwl_eeprom_query16(priv
, EEPROM_LINK_PROCESS_ADJST
);
601 case INDIRECT_OTHERS
:
602 offset
= iwl_eeprom_query16(priv
, EEPROM_LINK_OTHERS
);
605 IWL_ERR(priv
, "illegal indirect type: 0x%X\n",
606 address
& INDIRECT_TYPE_MSK
);
610 /* translate the offset from words to byte */
611 return (address
& ADDRESS_MSK
) + (offset
<< 1);
614 const u8
*iwl_eeprom_query_addr(const struct iwl_priv
*priv
, size_t offset
)
616 u32 address
= eeprom_indirect_address(priv
, offset
);
617 BUG_ON(address
>= priv
->cfg
->base_params
->eeprom_size
);
618 return &priv
->eeprom
[address
];
621 struct iwl_mod_params iwlagn_mod_params
= {
625 .bt_coex_active
= true,
626 .no_sleep_autoadjust
= true,
627 .power_level
= IWL_POWER_INDEX_1
,
628 /* the rest are 0 by default */
631 int iwlagn_rx_init(struct iwl_priv
*priv
, struct iwl_rx_queue
*rxq
)
634 const u32 rfdnlog
= RX_QUEUE_SIZE_LOG
; /* 256 RBDs */
635 u32 rb_timeout
= 0; /* FIXME: RX_RB_TIMEOUT for all devices? */
637 rb_timeout
= RX_RB_TIMEOUT
;
639 if (iwlagn_mod_params
.amsdu_size_8K
)
640 rb_size
= FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K
;
642 rb_size
= FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K
;
645 iwl_write_direct32(priv
, FH_MEM_RCSR_CHNL0_CONFIG_REG
, 0);
647 /* Reset driver's Rx queue write index */
648 iwl_write_direct32(priv
, FH_RSCSR_CHNL0_RBDCB_WPTR_REG
, 0);
650 /* Tell device where to find RBD circular buffer in DRAM */
651 iwl_write_direct32(priv
, FH_RSCSR_CHNL0_RBDCB_BASE_REG
,
652 (u32
)(rxq
->bd_dma
>> 8));
654 /* Tell device where in DRAM to update its Rx status */
655 iwl_write_direct32(priv
, FH_RSCSR_CHNL0_STTS_WPTR_REG
,
656 rxq
->rb_stts_dma
>> 4);
659 * FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY is set because of HW bug in
660 * the credit mechanism in 5000 HW RX FIFO
661 * Direct rx interrupts to hosts
662 * Rx buffer size 4 or 8k
666 iwl_write_direct32(priv
, FH_MEM_RCSR_CHNL0_CONFIG_REG
,
667 FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL
|
668 FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY
|
669 FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL
|
670 FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK
|
672 (rb_timeout
<< FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS
)|
673 (rfdnlog
<< FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS
));
675 /* Set interrupt coalescing timer to default (2048 usecs) */
676 iwl_write8(priv
, CSR_INT_COALESCING
, IWL_HOST_INT_TIMEOUT_DEF
);
681 static void iwlagn_set_pwr_vmain(struct iwl_priv
*priv
)
684 * (for documentation purposes)
685 * to set power to V_AUX, do:
687 if (pci_pme_capable(priv->pci_dev, PCI_D3cold))
688 iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
689 APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
690 ~APMG_PS_CTRL_MSK_PWR_SRC);
693 iwl_set_bits_mask_prph(priv
, APMG_PS_CTRL_REG
,
694 APMG_PS_CTRL_VAL_PWR_SRC_VMAIN
,
695 ~APMG_PS_CTRL_MSK_PWR_SRC
);
698 int iwlagn_hw_nic_init(struct iwl_priv
*priv
)
701 struct iwl_rx_queue
*rxq
= &priv
->rxq
;
704 spin_lock_irqsave(&priv
->lock
, flags
);
707 /* Set interrupt coalescing calibration timer to default (512 usecs) */
708 iwl_write8(priv
, CSR_INT_COALESCING
, IWL_HOST_INT_CALIB_TIMEOUT_DEF
);
710 spin_unlock_irqrestore(&priv
->lock
, flags
);
712 iwlagn_set_pwr_vmain(priv
);
714 priv
->cfg
->ops
->lib
->nic_config(priv
);
716 /* Allocate the RX queue, or reset if it is already allocated */
719 iwlagn_rx_replenish(priv
);
721 iwlagn_rx_init(priv
, rxq
);
723 spin_lock_irqsave(&priv
->lock
, flags
);
725 rxq
->need_update
= 1;
726 iwl_rx_queue_update_write_ptr(priv
, rxq
);
728 spin_unlock_irqrestore(&priv
->lock
, flags
);
730 /* Allocate or reset and init all Tx and Command queues */
731 if (trans_tx_init(priv
))
734 if (priv
->cfg
->base_params
->shadow_reg_enable
) {
735 /* enable shadow regs in HW */
736 iwl_set_bit(priv
, CSR_MAC_SHADOW_REG_CTRL
,
740 set_bit(STATUS_INIT
, &priv
->status
);
746 * iwlagn_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
748 static inline __le32
iwlagn_dma_addr2rbd_ptr(struct iwl_priv
*priv
,
751 return cpu_to_le32((u32
)(dma_addr
>> 8));
755 * iwlagn_rx_queue_restock - refill RX queue from pre-allocated pool
757 * If there are slots in the RX queue that need to be restocked,
758 * and we have free pre-allocated buffers, fill the ranks as much
759 * as we can, pulling from rx_free.
761 * This moves the 'write' index forward to catch up with 'processed', and
762 * also updates the memory address in the firmware to reference the new
765 void iwlagn_rx_queue_restock(struct iwl_priv
*priv
)
767 struct iwl_rx_queue
*rxq
= &priv
->rxq
;
768 struct list_head
*element
;
769 struct iwl_rx_mem_buffer
*rxb
;
772 spin_lock_irqsave(&rxq
->lock
, flags
);
773 while ((iwl_rx_queue_space(rxq
) > 0) && (rxq
->free_count
)) {
774 /* The overwritten rxb must be a used one */
775 rxb
= rxq
->queue
[rxq
->write
];
776 BUG_ON(rxb
&& rxb
->page
);
778 /* Get next free Rx buffer, remove from free list */
779 element
= rxq
->rx_free
.next
;
780 rxb
= list_entry(element
, struct iwl_rx_mem_buffer
, list
);
783 /* Point to Rx buffer via next RBD in circular buffer */
784 rxq
->bd
[rxq
->write
] = iwlagn_dma_addr2rbd_ptr(priv
,
786 rxq
->queue
[rxq
->write
] = rxb
;
787 rxq
->write
= (rxq
->write
+ 1) & RX_QUEUE_MASK
;
790 spin_unlock_irqrestore(&rxq
->lock
, flags
);
791 /* If the pre-allocated buffer pool is dropping low, schedule to
793 if (rxq
->free_count
<= RX_LOW_WATERMARK
)
794 queue_work(priv
->workqueue
, &priv
->rx_replenish
);
797 /* If we've added more space for the firmware to place data, tell it.
798 * Increment device's write pointer in multiples of 8. */
799 if (rxq
->write_actual
!= (rxq
->write
& ~0x7)) {
800 spin_lock_irqsave(&rxq
->lock
, flags
);
801 rxq
->need_update
= 1;
802 spin_unlock_irqrestore(&rxq
->lock
, flags
);
803 iwl_rx_queue_update_write_ptr(priv
, rxq
);
808 * iwlagn_rx_replenish - Move all used packet from rx_used to rx_free
810 * When moving to rx_free an SKB is allocated for the slot.
812 * Also restock the Rx queue via iwl_rx_queue_restock.
813 * This is called as a scheduled work item (except for during initialization)
815 void iwlagn_rx_allocate(struct iwl_priv
*priv
, gfp_t priority
)
817 struct iwl_rx_queue
*rxq
= &priv
->rxq
;
818 struct list_head
*element
;
819 struct iwl_rx_mem_buffer
*rxb
;
822 gfp_t gfp_mask
= priority
;
825 spin_lock_irqsave(&rxq
->lock
, flags
);
826 if (list_empty(&rxq
->rx_used
)) {
827 spin_unlock_irqrestore(&rxq
->lock
, flags
);
830 spin_unlock_irqrestore(&rxq
->lock
, flags
);
832 if (rxq
->free_count
> RX_LOW_WATERMARK
)
833 gfp_mask
|= __GFP_NOWARN
;
835 if (priv
->hw_params
.rx_page_order
> 0)
836 gfp_mask
|= __GFP_COMP
;
838 /* Alloc a new receive buffer */
839 page
= alloc_pages(gfp_mask
, priv
->hw_params
.rx_page_order
);
842 IWL_DEBUG_INFO(priv
, "alloc_pages failed, "
844 priv
->hw_params
.rx_page_order
);
846 if ((rxq
->free_count
<= RX_LOW_WATERMARK
) &&
848 IWL_CRIT(priv
, "Failed to alloc_pages with %s. Only %u free buffers remaining.\n",
849 priority
== GFP_ATOMIC
? "GFP_ATOMIC" : "GFP_KERNEL",
851 /* We don't reschedule replenish work here -- we will
852 * call the restock method and if it still needs
853 * more buffers it will schedule replenish */
857 spin_lock_irqsave(&rxq
->lock
, flags
);
859 if (list_empty(&rxq
->rx_used
)) {
860 spin_unlock_irqrestore(&rxq
->lock
, flags
);
861 __free_pages(page
, priv
->hw_params
.rx_page_order
);
864 element
= rxq
->rx_used
.next
;
865 rxb
= list_entry(element
, struct iwl_rx_mem_buffer
, list
);
868 spin_unlock_irqrestore(&rxq
->lock
, flags
);
872 /* Get physical address of the RB */
873 rxb
->page_dma
= dma_map_page(priv
->bus
.dev
, page
, 0,
874 PAGE_SIZE
<< priv
->hw_params
.rx_page_order
,
876 /* dma address must be no more than 36 bits */
877 BUG_ON(rxb
->page_dma
& ~DMA_BIT_MASK(36));
878 /* and also 256 byte aligned! */
879 BUG_ON(rxb
->page_dma
& DMA_BIT_MASK(8));
881 spin_lock_irqsave(&rxq
->lock
, flags
);
883 list_add_tail(&rxb
->list
, &rxq
->rx_free
);
886 spin_unlock_irqrestore(&rxq
->lock
, flags
);
890 void iwlagn_rx_replenish(struct iwl_priv
*priv
)
894 iwlagn_rx_allocate(priv
, GFP_KERNEL
);
896 spin_lock_irqsave(&priv
->lock
, flags
);
897 iwlagn_rx_queue_restock(priv
);
898 spin_unlock_irqrestore(&priv
->lock
, flags
);
901 void iwlagn_rx_replenish_now(struct iwl_priv
*priv
)
903 iwlagn_rx_allocate(priv
, GFP_ATOMIC
);
905 iwlagn_rx_queue_restock(priv
);
908 int iwlagn_hwrate_to_mac80211_idx(u32 rate_n_flags
, enum ieee80211_band band
)
913 /* HT rate format: mac80211 wants an MCS number, which is just LSB */
914 if (rate_n_flags
& RATE_MCS_HT_MSK
) {
915 idx
= (rate_n_flags
& 0xff);
917 /* Legacy rate format, search for match in table */
919 if (band
== IEEE80211_BAND_5GHZ
)
920 band_offset
= IWL_FIRST_OFDM_RATE
;
921 for (idx
= band_offset
; idx
< IWL_RATE_COUNT_LEGACY
; idx
++)
922 if (iwl_rates
[idx
].plcp
== (rate_n_flags
& 0xFF))
923 return idx
- band_offset
;
929 static int iwl_get_single_channel_for_scan(struct iwl_priv
*priv
,
930 struct ieee80211_vif
*vif
,
931 enum ieee80211_band band
,
932 struct iwl_scan_channel
*scan_ch
)
934 const struct ieee80211_supported_band
*sband
;
935 u16 passive_dwell
= 0;
936 u16 active_dwell
= 0;
940 sband
= iwl_get_hw_mode(priv
, band
);
942 IWL_ERR(priv
, "invalid band\n");
946 active_dwell
= iwl_get_active_dwell_time(priv
, band
, 0);
947 passive_dwell
= iwl_get_passive_dwell_time(priv
, band
, vif
);
949 if (passive_dwell
<= active_dwell
)
950 passive_dwell
= active_dwell
+ 1;
952 channel
= iwl_get_single_channel_number(priv
, band
);
954 scan_ch
->channel
= cpu_to_le16(channel
);
955 scan_ch
->type
= SCAN_CHANNEL_TYPE_PASSIVE
;
956 scan_ch
->active_dwell
= cpu_to_le16(active_dwell
);
957 scan_ch
->passive_dwell
= cpu_to_le16(passive_dwell
);
958 /* Set txpower levels to defaults */
959 scan_ch
->dsp_atten
= 110;
960 if (band
== IEEE80211_BAND_5GHZ
)
961 scan_ch
->tx_gain
= ((1 << 5) | (3 << 3)) | 3;
963 scan_ch
->tx_gain
= ((1 << 5) | (5 << 3));
966 IWL_ERR(priv
, "no valid channel found\n");
970 static int iwl_get_channels_for_scan(struct iwl_priv
*priv
,
971 struct ieee80211_vif
*vif
,
972 enum ieee80211_band band
,
973 u8 is_active
, u8 n_probes
,
974 struct iwl_scan_channel
*scan_ch
)
976 struct ieee80211_channel
*chan
;
977 const struct ieee80211_supported_band
*sband
;
978 const struct iwl_channel_info
*ch_info
;
979 u16 passive_dwell
= 0;
980 u16 active_dwell
= 0;
984 sband
= iwl_get_hw_mode(priv
, band
);
988 active_dwell
= iwl_get_active_dwell_time(priv
, band
, n_probes
);
989 passive_dwell
= iwl_get_passive_dwell_time(priv
, band
, vif
);
991 if (passive_dwell
<= active_dwell
)
992 passive_dwell
= active_dwell
+ 1;
994 for (i
= 0, added
= 0; i
< priv
->scan_request
->n_channels
; i
++) {
995 chan
= priv
->scan_request
->channels
[i
];
997 if (chan
->band
!= band
)
1000 channel
= chan
->hw_value
;
1001 scan_ch
->channel
= cpu_to_le16(channel
);
1003 ch_info
= iwl_get_channel_info(priv
, band
, channel
);
1004 if (!is_channel_valid(ch_info
)) {
1005 IWL_DEBUG_SCAN(priv
, "Channel %d is INVALID for this band.\n",
1010 if (!is_active
|| is_channel_passive(ch_info
) ||
1011 (chan
->flags
& IEEE80211_CHAN_PASSIVE_SCAN
))
1012 scan_ch
->type
= SCAN_CHANNEL_TYPE_PASSIVE
;
1014 scan_ch
->type
= SCAN_CHANNEL_TYPE_ACTIVE
;
1017 scan_ch
->type
|= IWL_SCAN_PROBE_MASK(n_probes
);
1019 scan_ch
->active_dwell
= cpu_to_le16(active_dwell
);
1020 scan_ch
->passive_dwell
= cpu_to_le16(passive_dwell
);
1022 /* Set txpower levels to defaults */
1023 scan_ch
->dsp_atten
= 110;
1025 /* NOTE: if we were doing 6Mb OFDM for scans we'd use
1027 * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
1029 if (band
== IEEE80211_BAND_5GHZ
)
1030 scan_ch
->tx_gain
= ((1 << 5) | (3 << 3)) | 3;
1032 scan_ch
->tx_gain
= ((1 << 5) | (5 << 3));
1034 IWL_DEBUG_SCAN(priv
, "Scanning ch=%d prob=0x%X [%s %d]\n",
1035 channel
, le32_to_cpu(scan_ch
->type
),
1036 (scan_ch
->type
& SCAN_CHANNEL_TYPE_ACTIVE
) ?
1037 "ACTIVE" : "PASSIVE",
1038 (scan_ch
->type
& SCAN_CHANNEL_TYPE_ACTIVE
) ?
1039 active_dwell
: passive_dwell
);
1045 IWL_DEBUG_SCAN(priv
, "total channels to scan %d\n", added
);
1049 static int iwl_fill_offch_tx(struct iwl_priv
*priv
, void *data
, size_t maxlen
)
1051 struct sk_buff
*skb
= priv
->_agn
.offchan_tx_skb
;
1053 if (skb
->len
< maxlen
)
1056 memcpy(data
, skb
->data
, maxlen
);
1061 int iwlagn_request_scan(struct iwl_priv
*priv
, struct ieee80211_vif
*vif
)
1063 struct iwl_host_cmd cmd
= {
1064 .id
= REPLY_SCAN_CMD
,
1065 .len
= { sizeof(struct iwl_scan_cmd
), },
1068 struct iwl_scan_cmd
*scan
;
1069 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
1073 enum ieee80211_band band
;
1075 u8 rx_ant
= priv
->hw_params
.valid_rx_ant
;
1077 bool is_active
= false;
1080 u8 scan_tx_antennas
= priv
->hw_params
.valid_tx_ant
;
1083 lockdep_assert_held(&priv
->mutex
);
1086 ctx
= iwl_rxon_ctx_from_vif(vif
);
1088 if (!priv
->scan_cmd
) {
1089 priv
->scan_cmd
= kmalloc(sizeof(struct iwl_scan_cmd
) +
1090 IWL_MAX_SCAN_SIZE
, GFP_KERNEL
);
1091 if (!priv
->scan_cmd
) {
1092 IWL_DEBUG_SCAN(priv
,
1093 "fail to allocate memory for scan\n");
1097 scan
= priv
->scan_cmd
;
1098 memset(scan
, 0, sizeof(struct iwl_scan_cmd
) + IWL_MAX_SCAN_SIZE
);
1100 scan
->quiet_plcp_th
= IWL_PLCP_QUIET_THRESH
;
1101 scan
->quiet_time
= IWL_ACTIVE_QUIET_TIME
;
1103 if (priv
->scan_type
!= IWL_SCAN_OFFCH_TX
&&
1104 iwl_is_any_associated(priv
)) {
1107 u32 suspend_time
= 100;
1108 u32 scan_suspend_time
= 100;
1110 IWL_DEBUG_INFO(priv
, "Scanning while associated...\n");
1111 switch (priv
->scan_type
) {
1112 case IWL_SCAN_OFFCH_TX
:
1115 case IWL_SCAN_RADIO_RESET
:
1118 case IWL_SCAN_NORMAL
:
1119 interval
= vif
->bss_conf
.beacon_int
;
1123 scan
->suspend_time
= 0;
1124 scan
->max_out_time
= cpu_to_le32(200 * 1024);
1126 interval
= suspend_time
;
1128 extra
= (suspend_time
/ interval
) << 22;
1129 scan_suspend_time
= (extra
|
1130 ((suspend_time
% interval
) * 1024));
1131 scan
->suspend_time
= cpu_to_le32(scan_suspend_time
);
1132 IWL_DEBUG_SCAN(priv
, "suspend_time 0x%X beacon interval %d\n",
1133 scan_suspend_time
, interval
);
1134 } else if (priv
->scan_type
== IWL_SCAN_OFFCH_TX
) {
1135 scan
->suspend_time
= 0;
1136 scan
->max_out_time
=
1137 cpu_to_le32(1024 * priv
->_agn
.offchan_tx_timeout
);
1140 switch (priv
->scan_type
) {
1141 case IWL_SCAN_RADIO_RESET
:
1142 IWL_DEBUG_SCAN(priv
, "Start internal passive scan.\n");
1144 case IWL_SCAN_NORMAL
:
1145 if (priv
->scan_request
->n_ssids
) {
1147 IWL_DEBUG_SCAN(priv
, "Kicking off active scan\n");
1148 for (i
= 0; i
< priv
->scan_request
->n_ssids
; i
++) {
1149 /* always does wildcard anyway */
1150 if (!priv
->scan_request
->ssids
[i
].ssid_len
)
1152 scan
->direct_scan
[p
].id
= WLAN_EID_SSID
;
1153 scan
->direct_scan
[p
].len
=
1154 priv
->scan_request
->ssids
[i
].ssid_len
;
1155 memcpy(scan
->direct_scan
[p
].ssid
,
1156 priv
->scan_request
->ssids
[i
].ssid
,
1157 priv
->scan_request
->ssids
[i
].ssid_len
);
1163 IWL_DEBUG_SCAN(priv
, "Start passive scan.\n");
1165 case IWL_SCAN_OFFCH_TX
:
1166 IWL_DEBUG_SCAN(priv
, "Start offchannel TX scan.\n");
1170 scan
->tx_cmd
.tx_flags
= TX_CMD_FLG_SEQ_CTL_MSK
;
1171 scan
->tx_cmd
.sta_id
= ctx
->bcast_sta_id
;
1172 scan
->tx_cmd
.stop_time
.life_time
= TX_CMD_LIFE_TIME_INFINITE
;
1174 switch (priv
->scan_band
) {
1175 case IEEE80211_BAND_2GHZ
:
1176 scan
->flags
= RXON_FLG_BAND_24G_MSK
| RXON_FLG_AUTO_DETECT_MSK
;
1177 chan_mod
= le32_to_cpu(
1178 priv
->contexts
[IWL_RXON_CTX_BSS
].active
.flags
&
1179 RXON_FLG_CHANNEL_MODE_MSK
)
1180 >> RXON_FLG_CHANNEL_MODE_POS
;
1181 if (chan_mod
== CHANNEL_MODE_PURE_40
) {
1182 rate
= IWL_RATE_6M_PLCP
;
1184 rate
= IWL_RATE_1M_PLCP
;
1185 rate_flags
= RATE_MCS_CCK_MSK
;
1188 * Internal scans are passive, so we can indiscriminately set
1189 * the BT ignore flag on 2.4 GHz since it applies to TX only.
1191 if (priv
->cfg
->bt_params
&&
1192 priv
->cfg
->bt_params
->advanced_bt_coexist
)
1193 scan
->tx_cmd
.tx_flags
|= TX_CMD_FLG_IGNORE_BT
;
1195 case IEEE80211_BAND_5GHZ
:
1196 rate
= IWL_RATE_6M_PLCP
;
1199 IWL_WARN(priv
, "Invalid scan band\n");
1204 * If active scanning is requested but a certain channel is
1205 * marked passive, we can do active scanning if we detect
1208 * There is an issue with some firmware versions that triggers
1209 * a sysassert on a "good CRC threshold" of zero (== disabled),
1210 * on a radar channel even though this means that we should NOT
1213 * The "good CRC threshold" is the number of frames that we
1214 * need to receive during our dwell time on a channel before
1215 * sending out probes -- setting this to a huge value will
1216 * mean we never reach it, but at the same time work around
1217 * the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER
1218 * here instead of IWL_GOOD_CRC_TH_DISABLED.
1220 * This was fixed in later versions along with some other
1221 * scan changes, and the threshold behaves as a flag in those
1224 if (priv
->new_scan_threshold_behaviour
)
1225 scan
->good_CRC_th
= is_active
? IWL_GOOD_CRC_TH_DEFAULT
:
1226 IWL_GOOD_CRC_TH_DISABLED
;
1228 scan
->good_CRC_th
= is_active
? IWL_GOOD_CRC_TH_DEFAULT
:
1229 IWL_GOOD_CRC_TH_NEVER
;
1231 band
= priv
->scan_band
;
1233 if (priv
->cfg
->scan_rx_antennas
[band
])
1234 rx_ant
= priv
->cfg
->scan_rx_antennas
[band
];
1236 if (band
== IEEE80211_BAND_2GHZ
&&
1237 priv
->cfg
->bt_params
&&
1238 priv
->cfg
->bt_params
->advanced_bt_coexist
) {
1239 /* transmit 2.4 GHz probes only on first antenna */
1240 scan_tx_antennas
= first_antenna(scan_tx_antennas
);
1243 priv
->scan_tx_ant
[band
] = iwl_toggle_tx_ant(priv
, priv
->scan_tx_ant
[band
],
1245 rate_flags
|= iwl_ant_idx_to_flags(priv
->scan_tx_ant
[band
]);
1246 scan
->tx_cmd
.rate_n_flags
= iwl_hw_set_rate_n_flags(rate
, rate_flags
);
1248 /* In power save mode use one chain, otherwise use all chains */
1249 if (test_bit(STATUS_POWER_PMI
, &priv
->status
)) {
1250 /* rx_ant has been set to all valid chains previously */
1251 active_chains
= rx_ant
&
1252 ((u8
)(priv
->chain_noise_data
.active_chains
));
1254 active_chains
= rx_ant
;
1256 IWL_DEBUG_SCAN(priv
, "chain_noise_data.active_chains: %u\n",
1257 priv
->chain_noise_data
.active_chains
);
1259 rx_ant
= first_antenna(active_chains
);
1261 if (priv
->cfg
->bt_params
&&
1262 priv
->cfg
->bt_params
->advanced_bt_coexist
&&
1263 priv
->bt_full_concurrent
) {
1264 /* operated as 1x1 in full concurrency mode */
1265 rx_ant
= first_antenna(rx_ant
);
1268 /* MIMO is not used here, but value is required */
1269 rx_chain
|= priv
->hw_params
.valid_rx_ant
<< RXON_RX_CHAIN_VALID_POS
;
1270 rx_chain
|= rx_ant
<< RXON_RX_CHAIN_FORCE_MIMO_SEL_POS
;
1271 rx_chain
|= rx_ant
<< RXON_RX_CHAIN_FORCE_SEL_POS
;
1272 rx_chain
|= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS
;
1273 scan
->rx_chain
= cpu_to_le16(rx_chain
);
1274 switch (priv
->scan_type
) {
1275 case IWL_SCAN_NORMAL
:
1276 cmd_len
= iwl_fill_probe_req(priv
,
1277 (struct ieee80211_mgmt
*)scan
->data
,
1279 priv
->scan_request
->ie
,
1280 priv
->scan_request
->ie_len
,
1281 IWL_MAX_SCAN_SIZE
- sizeof(*scan
));
1283 case IWL_SCAN_RADIO_RESET
:
1284 /* use bcast addr, will not be transmitted but must be valid */
1285 cmd_len
= iwl_fill_probe_req(priv
,
1286 (struct ieee80211_mgmt
*)scan
->data
,
1287 iwl_bcast_addr
, NULL
, 0,
1288 IWL_MAX_SCAN_SIZE
- sizeof(*scan
));
1290 case IWL_SCAN_OFFCH_TX
:
1291 cmd_len
= iwl_fill_offch_tx(priv
, scan
->data
,
1294 - sizeof(struct iwl_scan_channel
));
1295 scan
->scan_flags
|= IWL_SCAN_FLAGS_ACTION_FRAME_TX
;
1300 scan
->tx_cmd
.len
= cpu_to_le16(cmd_len
);
1302 scan
->filter_flags
|= (RXON_FILTER_ACCEPT_GRP_MSK
|
1303 RXON_FILTER_BCON_AWARE_MSK
);
1305 switch (priv
->scan_type
) {
1306 case IWL_SCAN_RADIO_RESET
:
1307 scan
->channel_count
=
1308 iwl_get_single_channel_for_scan(priv
, vif
, band
,
1309 (void *)&scan
->data
[cmd_len
]);
1311 case IWL_SCAN_NORMAL
:
1312 scan
->channel_count
=
1313 iwl_get_channels_for_scan(priv
, vif
, band
,
1314 is_active
, n_probes
,
1315 (void *)&scan
->data
[cmd_len
]);
1317 case IWL_SCAN_OFFCH_TX
: {
1318 struct iwl_scan_channel
*scan_ch
;
1320 scan
->channel_count
= 1;
1322 scan_ch
= (void *)&scan
->data
[cmd_len
];
1323 scan_ch
->type
= SCAN_CHANNEL_TYPE_ACTIVE
;
1325 cpu_to_le16(priv
->_agn
.offchan_tx_chan
->hw_value
);
1326 scan_ch
->active_dwell
=
1327 cpu_to_le16(priv
->_agn
.offchan_tx_timeout
);
1328 scan_ch
->passive_dwell
= 0;
1330 /* Set txpower levels to defaults */
1331 scan_ch
->dsp_atten
= 110;
1333 /* NOTE: if we were doing 6Mb OFDM for scans we'd use
1335 * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
1337 if (priv
->_agn
.offchan_tx_chan
->band
== IEEE80211_BAND_5GHZ
)
1338 scan_ch
->tx_gain
= ((1 << 5) | (3 << 3)) | 3;
1340 scan_ch
->tx_gain
= ((1 << 5) | (5 << 3));
1345 if (scan
->channel_count
== 0) {
1346 IWL_DEBUG_SCAN(priv
, "channel count %d\n", scan
->channel_count
);
1350 cmd
.len
[0] += le16_to_cpu(scan
->tx_cmd
.len
) +
1351 scan
->channel_count
* sizeof(struct iwl_scan_channel
);
1353 cmd
.dataflags
[0] = IWL_HCMD_DFL_NOCOPY
;
1354 scan
->len
= cpu_to_le16(cmd
.len
[0]);
1356 /* set scan bit here for PAN params */
1357 set_bit(STATUS_SCAN_HW
, &priv
->status
);
1359 ret
= iwlagn_set_pan_params(priv
);
1363 ret
= trans_send_cmd(priv
, &cmd
);
1365 clear_bit(STATUS_SCAN_HW
, &priv
->status
);
1366 iwlagn_set_pan_params(priv
);
1372 int iwlagn_manage_ibss_station(struct iwl_priv
*priv
,
1373 struct ieee80211_vif
*vif
, bool add
)
1375 struct iwl_vif_priv
*vif_priv
= (void *)vif
->drv_priv
;
1378 return iwlagn_add_bssid_station(priv
, vif_priv
->ctx
,
1379 vif
->bss_conf
.bssid
,
1380 &vif_priv
->ibss_bssid_sta_id
);
1381 return iwl_remove_station(priv
, vif_priv
->ibss_bssid_sta_id
,
1382 vif
->bss_conf
.bssid
);
1385 void iwl_free_tfds_in_queue(struct iwl_priv
*priv
,
1386 int sta_id
, int tid
, int freed
)
1388 lockdep_assert_held(&priv
->sta_lock
);
1390 if (priv
->stations
[sta_id
].tid
[tid
].tfds_in_queue
>= freed
)
1391 priv
->stations
[sta_id
].tid
[tid
].tfds_in_queue
-= freed
;
1393 IWL_DEBUG_TX(priv
, "free more than tfds_in_queue (%u:%d)\n",
1394 priv
->stations
[sta_id
].tid
[tid
].tfds_in_queue
,
1396 priv
->stations
[sta_id
].tid
[tid
].tfds_in_queue
= 0;
1400 #define IWL_FLUSH_WAIT_MS 2000
1402 int iwlagn_wait_tx_queue_empty(struct iwl_priv
*priv
)
1404 struct iwl_tx_queue
*txq
;
1405 struct iwl_queue
*q
;
1407 unsigned long now
= jiffies
;
1410 /* waiting for all the tx frames complete might take a while */
1411 for (cnt
= 0; cnt
< priv
->hw_params
.max_txq_num
; cnt
++) {
1412 if (cnt
== priv
->cmd_queue
)
1414 txq
= &priv
->txq
[cnt
];
1416 while (q
->read_ptr
!= q
->write_ptr
&& !time_after(jiffies
,
1417 now
+ msecs_to_jiffies(IWL_FLUSH_WAIT_MS
)))
1420 if (q
->read_ptr
!= q
->write_ptr
) {
1421 IWL_ERR(priv
, "fail to flush all tx fifo queues\n");
1429 #define IWL_TX_QUEUE_MSK 0xfffff
1432 * iwlagn_txfifo_flush: send REPLY_TXFIFO_FLUSH command to uCode
1435 * 1. acquire mutex before calling
1436 * 2. make sure rf is on and not in exit state
1438 int iwlagn_txfifo_flush(struct iwl_priv
*priv
, u16 flush_control
)
1440 struct iwl_txfifo_flush_cmd flush_cmd
;
1441 struct iwl_host_cmd cmd
= {
1442 .id
= REPLY_TXFIFO_FLUSH
,
1443 .len
= { sizeof(struct iwl_txfifo_flush_cmd
), },
1445 .data
= { &flush_cmd
, },
1450 memset(&flush_cmd
, 0, sizeof(flush_cmd
));
1451 if (flush_control
& BIT(IWL_RXON_CTX_BSS
))
1452 flush_cmd
.fifo_control
= IWL_SCD_VO_MSK
| IWL_SCD_VI_MSK
|
1453 IWL_SCD_BE_MSK
| IWL_SCD_BK_MSK
|
1455 if ((flush_control
& BIT(IWL_RXON_CTX_PAN
)) &&
1456 (priv
->valid_contexts
!= BIT(IWL_RXON_CTX_BSS
)))
1457 flush_cmd
.fifo_control
|= IWL_PAN_SCD_VO_MSK
|
1458 IWL_PAN_SCD_VI_MSK
| IWL_PAN_SCD_BE_MSK
|
1459 IWL_PAN_SCD_BK_MSK
| IWL_PAN_SCD_MGMT_MSK
|
1460 IWL_PAN_SCD_MULTICAST_MSK
;
1462 if (priv
->cfg
->sku
& EEPROM_SKU_CAP_11N_ENABLE
)
1463 flush_cmd
.fifo_control
|= IWL_AGG_TX_QUEUE_MSK
;
1465 IWL_DEBUG_INFO(priv
, "fifo queue control: 0X%x\n",
1466 flush_cmd
.fifo_control
);
1467 flush_cmd
.flush_control
= cpu_to_le16(flush_control
);
1469 return trans_send_cmd(priv
, &cmd
);
1472 void iwlagn_dev_txfifo_flush(struct iwl_priv
*priv
, u16 flush_control
)
1474 mutex_lock(&priv
->mutex
);
1475 ieee80211_stop_queues(priv
->hw
);
1476 if (iwlagn_txfifo_flush(priv
, IWL_DROP_ALL
)) {
1477 IWL_ERR(priv
, "flush request fail\n");
1480 IWL_DEBUG_INFO(priv
, "wait transmit/flush all frames\n");
1481 iwlagn_wait_tx_queue_empty(priv
);
1483 ieee80211_wake_queues(priv
->hw
);
1484 mutex_unlock(&priv
->mutex
);
1491 * Macros to access the lookup table.
1493 * The lookup table has 7 inputs: bt3_prio, bt3_txrx, bt_rf_act, wifi_req,
1494 * wifi_prio, wifi_txrx and wifi_sh_ant_req.
1496 * It has three outputs: WLAN_ACTIVE, WLAN_KILL and ANT_SWITCH
1498 * The format is that "registers" 8 through 11 contain the WLAN_ACTIVE bits
1499 * one after another in 32-bit registers, and "registers" 0 through 7 contain
1500 * the WLAN_KILL and ANT_SWITCH bits interleaved (in that order).
1502 * These macros encode that format.
1504 #define LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, wifi_req, wifi_prio, \
1505 wifi_txrx, wifi_sh_ant_req) \
1506 (bt3_prio | (bt3_txrx << 1) | (bt_rf_act << 2) | (wifi_req << 3) | \
1507 (wifi_prio << 4) | (wifi_txrx << 5) | (wifi_sh_ant_req << 6))
1509 #define LUT_PTA_WLAN_ACTIVE_OP(lut, op, val) \
1510 lut[8 + ((val) >> 5)] op (cpu_to_le32(BIT((val) & 0x1f)))
1511 #define LUT_TEST_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1512 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1513 (!!(LUT_PTA_WLAN_ACTIVE_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, \
1514 bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \
1516 #define LUT_SET_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1517 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1518 LUT_PTA_WLAN_ACTIVE_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, \
1519 bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \
1521 #define LUT_CLEAR_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, \
1522 wifi_req, wifi_prio, wifi_txrx, \
1524 LUT_PTA_WLAN_ACTIVE_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, \
1525 bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \
1528 #define LUT_WLAN_KILL_OP(lut, op, val) \
1529 lut[(val) >> 4] op (cpu_to_le32(BIT(((val) << 1) & 0x1e)))
1530 #define LUT_TEST_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1531 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1532 (!!(LUT_WLAN_KILL_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1533 wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))))
1534 #define LUT_SET_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1535 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1536 LUT_WLAN_KILL_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1537 wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
1538 #define LUT_CLEAR_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1539 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1540 LUT_WLAN_KILL_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1541 wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
1543 #define LUT_ANT_SWITCH_OP(lut, op, val) \
1544 lut[(val) >> 4] op (cpu_to_le32(BIT((((val) << 1) & 0x1e) + 1)))
1545 #define LUT_TEST_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1546 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1547 (!!(LUT_ANT_SWITCH_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1548 wifi_req, wifi_prio, wifi_txrx, \
1550 #define LUT_SET_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1551 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1552 LUT_ANT_SWITCH_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1553 wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
1554 #define LUT_CLEAR_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1555 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1556 LUT_ANT_SWITCH_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1557 wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
1559 static const __le32 iwlagn_def_3w_lookup
[12] = {
1560 cpu_to_le32(0xaaaaaaaa),
1561 cpu_to_le32(0xaaaaaaaa),
1562 cpu_to_le32(0xaeaaaaaa),
1563 cpu_to_le32(0xaaaaaaaa),
1564 cpu_to_le32(0xcc00ff28),
1565 cpu_to_le32(0x0000aaaa),
1566 cpu_to_le32(0xcc00aaaa),
1567 cpu_to_le32(0x0000aaaa),
1568 cpu_to_le32(0xc0004000),
1569 cpu_to_le32(0x00004000),
1570 cpu_to_le32(0xf0005000),
1571 cpu_to_le32(0xf0005000),
1574 static const __le32 iwlagn_concurrent_lookup
[12] = {
1575 cpu_to_le32(0xaaaaaaaa),
1576 cpu_to_le32(0xaaaaaaaa),
1577 cpu_to_le32(0xaaaaaaaa),
1578 cpu_to_le32(0xaaaaaaaa),
1579 cpu_to_le32(0xaaaaaaaa),
1580 cpu_to_le32(0xaaaaaaaa),
1581 cpu_to_le32(0xaaaaaaaa),
1582 cpu_to_le32(0xaaaaaaaa),
1583 cpu_to_le32(0x00000000),
1584 cpu_to_le32(0x00000000),
1585 cpu_to_le32(0x00000000),
1586 cpu_to_le32(0x00000000),
1589 void iwlagn_send_advance_bt_config(struct iwl_priv
*priv
)
1591 struct iwl_basic_bt_cmd basic
= {
1592 .max_kill
= IWLAGN_BT_MAX_KILL_DEFAULT
,
1593 .bt3_timer_t7_value
= IWLAGN_BT3_T7_DEFAULT
,
1594 .bt3_prio_sample_time
= IWLAGN_BT3_PRIO_SAMPLE_DEFAULT
,
1595 .bt3_timer_t2_value
= IWLAGN_BT3_T2_DEFAULT
,
1597 struct iwl6000_bt_cmd bt_cmd_6000
;
1598 struct iwl2000_bt_cmd bt_cmd_2000
;
1601 BUILD_BUG_ON(sizeof(iwlagn_def_3w_lookup
) !=
1602 sizeof(basic
.bt3_lookup_table
));
1604 if (priv
->cfg
->bt_params
) {
1605 if (priv
->cfg
->bt_params
->bt_session_2
) {
1606 bt_cmd_2000
.prio_boost
= cpu_to_le32(
1607 priv
->cfg
->bt_params
->bt_prio_boost
);
1608 bt_cmd_2000
.tx_prio_boost
= 0;
1609 bt_cmd_2000
.rx_prio_boost
= 0;
1611 bt_cmd_6000
.prio_boost
=
1612 priv
->cfg
->bt_params
->bt_prio_boost
;
1613 bt_cmd_6000
.tx_prio_boost
= 0;
1614 bt_cmd_6000
.rx_prio_boost
= 0;
1617 IWL_ERR(priv
, "failed to construct BT Coex Config\n");
1621 basic
.kill_ack_mask
= priv
->kill_ack_mask
;
1622 basic
.kill_cts_mask
= priv
->kill_cts_mask
;
1623 basic
.valid
= priv
->bt_valid
;
1626 * Configure BT coex mode to "no coexistence" when the
1627 * user disabled BT coexistence, we have no interface
1628 * (might be in monitor mode), or the interface is in
1629 * IBSS mode (no proper uCode support for coex then).
1631 if (!iwlagn_mod_params
.bt_coex_active
||
1632 priv
->iw_mode
== NL80211_IFTYPE_ADHOC
) {
1633 basic
.flags
= IWLAGN_BT_FLAG_COEX_MODE_DISABLED
;
1635 basic
.flags
= IWLAGN_BT_FLAG_COEX_MODE_3W
<<
1636 IWLAGN_BT_FLAG_COEX_MODE_SHIFT
;
1638 if (!priv
->bt_enable_pspoll
)
1639 basic
.flags
|= IWLAGN_BT_FLAG_SYNC_2_BT_DISABLE
;
1641 basic
.flags
&= ~IWLAGN_BT_FLAG_SYNC_2_BT_DISABLE
;
1643 if (priv
->bt_ch_announce
)
1644 basic
.flags
|= IWLAGN_BT_FLAG_CHANNEL_INHIBITION
;
1645 IWL_DEBUG_COEX(priv
, "BT coex flag: 0X%x\n", basic
.flags
);
1647 priv
->bt_enable_flag
= basic
.flags
;
1648 if (priv
->bt_full_concurrent
)
1649 memcpy(basic
.bt3_lookup_table
, iwlagn_concurrent_lookup
,
1650 sizeof(iwlagn_concurrent_lookup
));
1652 memcpy(basic
.bt3_lookup_table
, iwlagn_def_3w_lookup
,
1653 sizeof(iwlagn_def_3w_lookup
));
1655 IWL_DEBUG_COEX(priv
, "BT coex %s in %s mode\n",
1656 basic
.flags
? "active" : "disabled",
1657 priv
->bt_full_concurrent
?
1658 "full concurrency" : "3-wire");
1660 if (priv
->cfg
->bt_params
->bt_session_2
) {
1661 memcpy(&bt_cmd_2000
.basic
, &basic
,
1663 ret
= trans_send_cmd_pdu(priv
, REPLY_BT_CONFIG
,
1664 CMD_SYNC
, sizeof(bt_cmd_2000
), &bt_cmd_2000
);
1666 memcpy(&bt_cmd_6000
.basic
, &basic
,
1668 ret
= trans_send_cmd_pdu(priv
, REPLY_BT_CONFIG
,
1669 CMD_SYNC
, sizeof(bt_cmd_6000
), &bt_cmd_6000
);
1672 IWL_ERR(priv
, "failed to send BT Coex Config\n");
1676 void iwlagn_bt_adjust_rssi_monitor(struct iwl_priv
*priv
, bool rssi_ena
)
1678 struct iwl_rxon_context
*ctx
, *found_ctx
= NULL
;
1679 bool found_ap
= false;
1681 lockdep_assert_held(&priv
->mutex
);
1683 /* Check whether AP or GO mode is active. */
1685 for_each_context(priv
, ctx
) {
1686 if (ctx
->vif
&& ctx
->vif
->type
== NL80211_IFTYPE_AP
&&
1687 iwl_is_associated_ctx(ctx
)) {
1695 * If disable was received or If GO/AP mode, disable RSSI
1698 if (!rssi_ena
|| found_ap
) {
1699 if (priv
->cur_rssi_ctx
) {
1700 ctx
= priv
->cur_rssi_ctx
;
1701 ieee80211_disable_rssi_reports(ctx
->vif
);
1702 priv
->cur_rssi_ctx
= NULL
;
1708 * If rssi measurements need to be enabled, consider all cases now.
1709 * Figure out how many contexts are active.
1711 for_each_context(priv
, ctx
) {
1712 if (ctx
->vif
&& ctx
->vif
->type
== NL80211_IFTYPE_STATION
&&
1713 iwl_is_associated_ctx(ctx
)) {
1720 * rssi monitor already enabled for the correct interface...nothing
1723 if (found_ctx
== priv
->cur_rssi_ctx
)
1727 * Figure out if rssi monitor is currently enabled, and needs
1728 * to be changed. If rssi monitor is already enabled, disable
1729 * it first else just enable rssi measurements on the
1730 * interface found above.
1732 if (priv
->cur_rssi_ctx
) {
1733 ctx
= priv
->cur_rssi_ctx
;
1735 ieee80211_disable_rssi_reports(ctx
->vif
);
1738 priv
->cur_rssi_ctx
= found_ctx
;
1743 ieee80211_enable_rssi_reports(found_ctx
->vif
,
1744 IWLAGN_BT_PSP_MIN_RSSI_THRESHOLD
,
1745 IWLAGN_BT_PSP_MAX_RSSI_THRESHOLD
);
1748 static bool iwlagn_bt_traffic_is_sco(struct iwl_bt_uart_msg
*uart_msg
)
1750 return BT_UART_MSG_FRAME3SCOESCO_MSK
& uart_msg
->frame3
>>
1751 BT_UART_MSG_FRAME3SCOESCO_POS
;
1754 static void iwlagn_bt_traffic_change_work(struct work_struct
*work
)
1756 struct iwl_priv
*priv
=
1757 container_of(work
, struct iwl_priv
, bt_traffic_change_work
);
1758 struct iwl_rxon_context
*ctx
;
1759 int smps_request
= -1;
1761 if (priv
->bt_enable_flag
== IWLAGN_BT_FLAG_COEX_MODE_DISABLED
) {
1762 /* bt coex disabled */
1767 * Note: bt_traffic_load can be overridden by scan complete and
1768 * coex profile notifications. Ignore that since only bad consequence
1769 * can be not matching debug print with actual state.
1771 IWL_DEBUG_COEX(priv
, "BT traffic load changes: %d\n",
1772 priv
->bt_traffic_load
);
1774 switch (priv
->bt_traffic_load
) {
1775 case IWL_BT_COEX_TRAFFIC_LOAD_NONE
:
1776 if (priv
->bt_status
)
1777 smps_request
= IEEE80211_SMPS_DYNAMIC
;
1779 smps_request
= IEEE80211_SMPS_AUTOMATIC
;
1781 case IWL_BT_COEX_TRAFFIC_LOAD_LOW
:
1782 smps_request
= IEEE80211_SMPS_DYNAMIC
;
1784 case IWL_BT_COEX_TRAFFIC_LOAD_HIGH
:
1785 case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS
:
1786 smps_request
= IEEE80211_SMPS_STATIC
;
1789 IWL_ERR(priv
, "Invalid BT traffic load: %d\n",
1790 priv
->bt_traffic_load
);
1794 mutex_lock(&priv
->mutex
);
1797 * We can not send command to firmware while scanning. When the scan
1798 * complete we will schedule this work again. We do check with mutex
1799 * locked to prevent new scan request to arrive. We do not check
1800 * STATUS_SCANNING to avoid race when queue_work two times from
1801 * different notifications, but quit and not perform any work at all.
1803 if (test_bit(STATUS_SCAN_HW
, &priv
->status
))
1806 iwl_update_chain_flags(priv
);
1808 if (smps_request
!= -1) {
1809 priv
->current_ht_config
.smps
= smps_request
;
1810 for_each_context(priv
, ctx
) {
1811 if (ctx
->vif
&& ctx
->vif
->type
== NL80211_IFTYPE_STATION
)
1812 ieee80211_request_smps(ctx
->vif
, smps_request
);
1817 * Dynamic PS poll related functionality. Adjust RSSI measurements if
1820 iwlagn_bt_coex_rssi_monitor(priv
);
1822 mutex_unlock(&priv
->mutex
);
1826 * If BT sco traffic, and RSSI monitor is enabled, move measurements to the
1827 * correct interface or disable it if this is the last interface to be
1830 void iwlagn_bt_coex_rssi_monitor(struct iwl_priv
*priv
)
1832 if (priv
->bt_is_sco
&&
1833 priv
->bt_traffic_load
== IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS
)
1834 iwlagn_bt_adjust_rssi_monitor(priv
, true);
1836 iwlagn_bt_adjust_rssi_monitor(priv
, false);
1839 static void iwlagn_print_uartmsg(struct iwl_priv
*priv
,
1840 struct iwl_bt_uart_msg
*uart_msg
)
1842 IWL_DEBUG_COEX(priv
, "Message Type = 0x%X, SSN = 0x%X, "
1843 "Update Req = 0x%X",
1844 (BT_UART_MSG_FRAME1MSGTYPE_MSK
& uart_msg
->frame1
) >>
1845 BT_UART_MSG_FRAME1MSGTYPE_POS
,
1846 (BT_UART_MSG_FRAME1SSN_MSK
& uart_msg
->frame1
) >>
1847 BT_UART_MSG_FRAME1SSN_POS
,
1848 (BT_UART_MSG_FRAME1UPDATEREQ_MSK
& uart_msg
->frame1
) >>
1849 BT_UART_MSG_FRAME1UPDATEREQ_POS
);
1851 IWL_DEBUG_COEX(priv
, "Open connections = 0x%X, Traffic load = 0x%X, "
1852 "Chl_SeqN = 0x%X, In band = 0x%X",
1853 (BT_UART_MSG_FRAME2OPENCONNECTIONS_MSK
& uart_msg
->frame2
) >>
1854 BT_UART_MSG_FRAME2OPENCONNECTIONS_POS
,
1855 (BT_UART_MSG_FRAME2TRAFFICLOAD_MSK
& uart_msg
->frame2
) >>
1856 BT_UART_MSG_FRAME2TRAFFICLOAD_POS
,
1857 (BT_UART_MSG_FRAME2CHLSEQN_MSK
& uart_msg
->frame2
) >>
1858 BT_UART_MSG_FRAME2CHLSEQN_POS
,
1859 (BT_UART_MSG_FRAME2INBAND_MSK
& uart_msg
->frame2
) >>
1860 BT_UART_MSG_FRAME2INBAND_POS
);
1862 IWL_DEBUG_COEX(priv
, "SCO/eSCO = 0x%X, Sniff = 0x%X, A2DP = 0x%X, "
1863 "ACL = 0x%X, Master = 0x%X, OBEX = 0x%X",
1864 (BT_UART_MSG_FRAME3SCOESCO_MSK
& uart_msg
->frame3
) >>
1865 BT_UART_MSG_FRAME3SCOESCO_POS
,
1866 (BT_UART_MSG_FRAME3SNIFF_MSK
& uart_msg
->frame3
) >>
1867 BT_UART_MSG_FRAME3SNIFF_POS
,
1868 (BT_UART_MSG_FRAME3A2DP_MSK
& uart_msg
->frame3
) >>
1869 BT_UART_MSG_FRAME3A2DP_POS
,
1870 (BT_UART_MSG_FRAME3ACL_MSK
& uart_msg
->frame3
) >>
1871 BT_UART_MSG_FRAME3ACL_POS
,
1872 (BT_UART_MSG_FRAME3MASTER_MSK
& uart_msg
->frame3
) >>
1873 BT_UART_MSG_FRAME3MASTER_POS
,
1874 (BT_UART_MSG_FRAME3OBEX_MSK
& uart_msg
->frame3
) >>
1875 BT_UART_MSG_FRAME3OBEX_POS
);
1877 IWL_DEBUG_COEX(priv
, "Idle duration = 0x%X",
1878 (BT_UART_MSG_FRAME4IDLEDURATION_MSK
& uart_msg
->frame4
) >>
1879 BT_UART_MSG_FRAME4IDLEDURATION_POS
);
1881 IWL_DEBUG_COEX(priv
, "Tx Activity = 0x%X, Rx Activity = 0x%X, "
1882 "eSCO Retransmissions = 0x%X",
1883 (BT_UART_MSG_FRAME5TXACTIVITY_MSK
& uart_msg
->frame5
) >>
1884 BT_UART_MSG_FRAME5TXACTIVITY_POS
,
1885 (BT_UART_MSG_FRAME5RXACTIVITY_MSK
& uart_msg
->frame5
) >>
1886 BT_UART_MSG_FRAME5RXACTIVITY_POS
,
1887 (BT_UART_MSG_FRAME5ESCORETRANSMIT_MSK
& uart_msg
->frame5
) >>
1888 BT_UART_MSG_FRAME5ESCORETRANSMIT_POS
);
1890 IWL_DEBUG_COEX(priv
, "Sniff Interval = 0x%X, Discoverable = 0x%X",
1891 (BT_UART_MSG_FRAME6SNIFFINTERVAL_MSK
& uart_msg
->frame6
) >>
1892 BT_UART_MSG_FRAME6SNIFFINTERVAL_POS
,
1893 (BT_UART_MSG_FRAME6DISCOVERABLE_MSK
& uart_msg
->frame6
) >>
1894 BT_UART_MSG_FRAME6DISCOVERABLE_POS
);
1896 IWL_DEBUG_COEX(priv
, "Sniff Activity = 0x%X, Page = "
1897 "0x%X, Inquiry = 0x%X, Connectable = 0x%X",
1898 (BT_UART_MSG_FRAME7SNIFFACTIVITY_MSK
& uart_msg
->frame7
) >>
1899 BT_UART_MSG_FRAME7SNIFFACTIVITY_POS
,
1900 (BT_UART_MSG_FRAME7PAGE_MSK
& uart_msg
->frame7
) >>
1901 BT_UART_MSG_FRAME7PAGE_POS
,
1902 (BT_UART_MSG_FRAME7INQUIRY_MSK
& uart_msg
->frame7
) >>
1903 BT_UART_MSG_FRAME7INQUIRY_POS
,
1904 (BT_UART_MSG_FRAME7CONNECTABLE_MSK
& uart_msg
->frame7
) >>
1905 BT_UART_MSG_FRAME7CONNECTABLE_POS
);
1908 static void iwlagn_set_kill_msk(struct iwl_priv
*priv
,
1909 struct iwl_bt_uart_msg
*uart_msg
)
1912 static const __le32 bt_kill_ack_msg
[2] = {
1913 IWLAGN_BT_KILL_ACK_MASK_DEFAULT
,
1914 IWLAGN_BT_KILL_ACK_CTS_MASK_SCO
};
1915 static const __le32 bt_kill_cts_msg
[2] = {
1916 IWLAGN_BT_KILL_CTS_MASK_DEFAULT
,
1917 IWLAGN_BT_KILL_ACK_CTS_MASK_SCO
};
1919 kill_msk
= (BT_UART_MSG_FRAME3SCOESCO_MSK
& uart_msg
->frame3
)
1921 if (priv
->kill_ack_mask
!= bt_kill_ack_msg
[kill_msk
] ||
1922 priv
->kill_cts_mask
!= bt_kill_cts_msg
[kill_msk
]) {
1923 priv
->bt_valid
|= IWLAGN_BT_VALID_KILL_ACK_MASK
;
1924 priv
->kill_ack_mask
= bt_kill_ack_msg
[kill_msk
];
1925 priv
->bt_valid
|= IWLAGN_BT_VALID_KILL_CTS_MASK
;
1926 priv
->kill_cts_mask
= bt_kill_cts_msg
[kill_msk
];
1928 /* schedule to send runtime bt_config */
1929 queue_work(priv
->workqueue
, &priv
->bt_runtime_config
);
1933 void iwlagn_bt_coex_profile_notif(struct iwl_priv
*priv
,
1934 struct iwl_rx_mem_buffer
*rxb
)
1936 unsigned long flags
;
1937 struct iwl_rx_packet
*pkt
= rxb_addr(rxb
);
1938 struct iwl_bt_coex_profile_notif
*coex
= &pkt
->u
.bt_coex_profile_notif
;
1939 struct iwl_bt_uart_msg
*uart_msg
= &coex
->last_bt_uart_msg
;
1941 if (priv
->bt_enable_flag
== IWLAGN_BT_FLAG_COEX_MODE_DISABLED
) {
1942 /* bt coex disabled */
1946 IWL_DEBUG_COEX(priv
, "BT Coex notification:\n");
1947 IWL_DEBUG_COEX(priv
, " status: %d\n", coex
->bt_status
);
1948 IWL_DEBUG_COEX(priv
, " traffic load: %d\n", coex
->bt_traffic_load
);
1949 IWL_DEBUG_COEX(priv
, " CI compliance: %d\n",
1950 coex
->bt_ci_compliance
);
1951 iwlagn_print_uartmsg(priv
, uart_msg
);
1953 priv
->last_bt_traffic_load
= priv
->bt_traffic_load
;
1954 priv
->bt_is_sco
= iwlagn_bt_traffic_is_sco(uart_msg
);
1956 if (priv
->iw_mode
!= NL80211_IFTYPE_ADHOC
) {
1957 if (priv
->bt_status
!= coex
->bt_status
||
1958 priv
->last_bt_traffic_load
!= coex
->bt_traffic_load
) {
1959 if (coex
->bt_status
) {
1961 if (!priv
->bt_ch_announce
)
1962 priv
->bt_traffic_load
=
1963 IWL_BT_COEX_TRAFFIC_LOAD_HIGH
;
1965 priv
->bt_traffic_load
=
1966 coex
->bt_traffic_load
;
1969 priv
->bt_traffic_load
=
1970 IWL_BT_COEX_TRAFFIC_LOAD_NONE
;
1972 priv
->bt_status
= coex
->bt_status
;
1973 queue_work(priv
->workqueue
,
1974 &priv
->bt_traffic_change_work
);
1978 iwlagn_set_kill_msk(priv
, uart_msg
);
1980 /* FIXME: based on notification, adjust the prio_boost */
1982 spin_lock_irqsave(&priv
->lock
, flags
);
1983 priv
->bt_ci_compliance
= coex
->bt_ci_compliance
;
1984 spin_unlock_irqrestore(&priv
->lock
, flags
);
1987 void iwlagn_bt_rx_handler_setup(struct iwl_priv
*priv
)
1989 iwlagn_rx_handler_setup(priv
);
1990 priv
->rx_handlers
[REPLY_BT_COEX_PROFILE_NOTIF
] =
1991 iwlagn_bt_coex_profile_notif
;
1994 void iwlagn_bt_setup_deferred_work(struct iwl_priv
*priv
)
1996 iwlagn_setup_deferred_work(priv
);
1998 INIT_WORK(&priv
->bt_traffic_change_work
,
1999 iwlagn_bt_traffic_change_work
);
2002 void iwlagn_bt_cancel_deferred_work(struct iwl_priv
*priv
)
2004 cancel_work_sync(&priv
->bt_traffic_change_work
);
2007 static bool is_single_rx_stream(struct iwl_priv
*priv
)
2009 return priv
->current_ht_config
.smps
== IEEE80211_SMPS_STATIC
||
2010 priv
->current_ht_config
.single_chain_sufficient
;
2013 #define IWL_NUM_RX_CHAINS_MULTIPLE 3
2014 #define IWL_NUM_RX_CHAINS_SINGLE 2
2015 #define IWL_NUM_IDLE_CHAINS_DUAL 2
2016 #define IWL_NUM_IDLE_CHAINS_SINGLE 1
2019 * Determine how many receiver/antenna chains to use.
2021 * More provides better reception via diversity. Fewer saves power
2022 * at the expense of throughput, but only when not in powersave to
2025 * MIMO (dual stream) requires at least 2, but works better with 3.
2026 * This does not determine *which* chains to use, just how many.
2028 static int iwl_get_active_rx_chain_count(struct iwl_priv
*priv
)
2030 if (priv
->cfg
->bt_params
&&
2031 priv
->cfg
->bt_params
->advanced_bt_coexist
&&
2032 (priv
->bt_full_concurrent
||
2033 priv
->bt_traffic_load
>= IWL_BT_COEX_TRAFFIC_LOAD_HIGH
)) {
2035 * only use chain 'A' in bt high traffic load or
2036 * full concurrency mode
2038 return IWL_NUM_RX_CHAINS_SINGLE
;
2040 /* # of Rx chains to use when expecting MIMO. */
2041 if (is_single_rx_stream(priv
))
2042 return IWL_NUM_RX_CHAINS_SINGLE
;
2044 return IWL_NUM_RX_CHAINS_MULTIPLE
;
2048 * When we are in power saving mode, unless device support spatial
2049 * multiplexing power save, use the active count for rx chain count.
2051 static int iwl_get_idle_rx_chain_count(struct iwl_priv
*priv
, int active_cnt
)
2053 /* # Rx chains when idling, depending on SMPS mode */
2054 switch (priv
->current_ht_config
.smps
) {
2055 case IEEE80211_SMPS_STATIC
:
2056 case IEEE80211_SMPS_DYNAMIC
:
2057 return IWL_NUM_IDLE_CHAINS_SINGLE
;
2058 case IEEE80211_SMPS_OFF
:
2061 WARN(1, "invalid SMPS mode %d",
2062 priv
->current_ht_config
.smps
);
2067 /* up to 4 chains */
2068 static u8
iwl_count_chain_bitmap(u32 chain_bitmap
)
2071 res
= (chain_bitmap
& BIT(0)) >> 0;
2072 res
+= (chain_bitmap
& BIT(1)) >> 1;
2073 res
+= (chain_bitmap
& BIT(2)) >> 2;
2074 res
+= (chain_bitmap
& BIT(3)) >> 3;
2079 * iwlagn_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
2081 * Selects how many and which Rx receivers/antennas/chains to use.
2082 * This should not be used for scan command ... it puts data in wrong place.
2084 void iwlagn_set_rxon_chain(struct iwl_priv
*priv
, struct iwl_rxon_context
*ctx
)
2086 bool is_single
= is_single_rx_stream(priv
);
2087 bool is_cam
= !test_bit(STATUS_POWER_PMI
, &priv
->status
);
2088 u8 idle_rx_cnt
, active_rx_cnt
, valid_rx_cnt
;
2092 /* Tell uCode which antennas are actually connected.
2093 * Before first association, we assume all antennas are connected.
2094 * Just after first association, iwl_chain_noise_calibration()
2095 * checks which antennas actually *are* connected. */
2096 if (priv
->chain_noise_data
.active_chains
)
2097 active_chains
= priv
->chain_noise_data
.active_chains
;
2099 active_chains
= priv
->hw_params
.valid_rx_ant
;
2101 if (priv
->cfg
->bt_params
&&
2102 priv
->cfg
->bt_params
->advanced_bt_coexist
&&
2103 (priv
->bt_full_concurrent
||
2104 priv
->bt_traffic_load
>= IWL_BT_COEX_TRAFFIC_LOAD_HIGH
)) {
2106 * only use chain 'A' in bt high traffic load or
2107 * full concurrency mode
2109 active_chains
= first_antenna(active_chains
);
2112 rx_chain
= active_chains
<< RXON_RX_CHAIN_VALID_POS
;
2114 /* How many receivers should we use? */
2115 active_rx_cnt
= iwl_get_active_rx_chain_count(priv
);
2116 idle_rx_cnt
= iwl_get_idle_rx_chain_count(priv
, active_rx_cnt
);
2119 /* correct rx chain count according hw settings
2120 * and chain noise calibration
2122 valid_rx_cnt
= iwl_count_chain_bitmap(active_chains
);
2123 if (valid_rx_cnt
< active_rx_cnt
)
2124 active_rx_cnt
= valid_rx_cnt
;
2126 if (valid_rx_cnt
< idle_rx_cnt
)
2127 idle_rx_cnt
= valid_rx_cnt
;
2129 rx_chain
|= active_rx_cnt
<< RXON_RX_CHAIN_MIMO_CNT_POS
;
2130 rx_chain
|= idle_rx_cnt
<< RXON_RX_CHAIN_CNT_POS
;
2132 ctx
->staging
.rx_chain
= cpu_to_le16(rx_chain
);
2134 if (!is_single
&& (active_rx_cnt
>= IWL_NUM_RX_CHAINS_SINGLE
) && is_cam
)
2135 ctx
->staging
.rx_chain
|= RXON_RX_CHAIN_MIMO_FORCE_MSK
;
2137 ctx
->staging
.rx_chain
&= ~RXON_RX_CHAIN_MIMO_FORCE_MSK
;
2139 IWL_DEBUG_ASSOC(priv
, "rx_chain=0x%X active=%d idle=%d\n",
2140 ctx
->staging
.rx_chain
,
2141 active_rx_cnt
, idle_rx_cnt
);
2143 WARN_ON(active_rx_cnt
== 0 || idle_rx_cnt
== 0 ||
2144 active_rx_cnt
< idle_rx_cnt
);
2147 u8
iwl_toggle_tx_ant(struct iwl_priv
*priv
, u8 ant
, u8 valid
)
2152 if (priv
->band
== IEEE80211_BAND_2GHZ
&&
2153 priv
->bt_traffic_load
>= IWL_BT_COEX_TRAFFIC_LOAD_HIGH
)
2156 for (i
= 0; i
< RATE_ANT_NUM
- 1; i
++) {
2157 ind
= (ind
+ 1) < RATE_ANT_NUM
? ind
+ 1 : 0;
2158 if (valid
& BIT(ind
))
2164 static const char *get_csr_string(int cmd
)
2167 IWL_CMD(CSR_HW_IF_CONFIG_REG
);
2168 IWL_CMD(CSR_INT_COALESCING
);
2170 IWL_CMD(CSR_INT_MASK
);
2171 IWL_CMD(CSR_FH_INT_STATUS
);
2172 IWL_CMD(CSR_GPIO_IN
);
2174 IWL_CMD(CSR_GP_CNTRL
);
2175 IWL_CMD(CSR_HW_REV
);
2176 IWL_CMD(CSR_EEPROM_REG
);
2177 IWL_CMD(CSR_EEPROM_GP
);
2178 IWL_CMD(CSR_OTP_GP_REG
);
2179 IWL_CMD(CSR_GIO_REG
);
2180 IWL_CMD(CSR_GP_UCODE_REG
);
2181 IWL_CMD(CSR_GP_DRIVER_REG
);
2182 IWL_CMD(CSR_UCODE_DRV_GP1
);
2183 IWL_CMD(CSR_UCODE_DRV_GP2
);
2184 IWL_CMD(CSR_LED_REG
);
2185 IWL_CMD(CSR_DRAM_INT_TBL_REG
);
2186 IWL_CMD(CSR_GIO_CHICKEN_BITS
);
2187 IWL_CMD(CSR_ANA_PLL_CFG
);
2188 IWL_CMD(CSR_HW_REV_WA_REG
);
2189 IWL_CMD(CSR_DBG_HPET_MEM_REG
);
2195 void iwl_dump_csr(struct iwl_priv
*priv
)
2198 static const u32 csr_tbl
[] = {
2199 CSR_HW_IF_CONFIG_REG
,
2217 CSR_DRAM_INT_TBL_REG
,
2218 CSR_GIO_CHICKEN_BITS
,
2221 CSR_DBG_HPET_MEM_REG
2223 IWL_ERR(priv
, "CSR values:\n");
2224 IWL_ERR(priv
, "(2nd byte of CSR_INT_COALESCING is "
2225 "CSR_INT_PERIODIC_REG)\n");
2226 for (i
= 0; i
< ARRAY_SIZE(csr_tbl
); i
++) {
2227 IWL_ERR(priv
, " %25s: 0X%08x\n",
2228 get_csr_string(csr_tbl
[i
]),
2229 iwl_read32(priv
, csr_tbl
[i
]));
2233 static const char *get_fh_string(int cmd
)
2236 IWL_CMD(FH_RSCSR_CHNL0_STTS_WPTR_REG
);
2237 IWL_CMD(FH_RSCSR_CHNL0_RBDCB_BASE_REG
);
2238 IWL_CMD(FH_RSCSR_CHNL0_WPTR
);
2239 IWL_CMD(FH_MEM_RCSR_CHNL0_CONFIG_REG
);
2240 IWL_CMD(FH_MEM_RSSR_SHARED_CTRL_REG
);
2241 IWL_CMD(FH_MEM_RSSR_RX_STATUS_REG
);
2242 IWL_CMD(FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV
);
2243 IWL_CMD(FH_TSSR_TX_STATUS_REG
);
2244 IWL_CMD(FH_TSSR_TX_ERROR_REG
);
2250 int iwl_dump_fh(struct iwl_priv
*priv
, char **buf
, bool display
)
2253 #ifdef CONFIG_IWLWIFI_DEBUG
2257 static const u32 fh_tbl
[] = {
2258 FH_RSCSR_CHNL0_STTS_WPTR_REG
,
2259 FH_RSCSR_CHNL0_RBDCB_BASE_REG
,
2260 FH_RSCSR_CHNL0_WPTR
,
2261 FH_MEM_RCSR_CHNL0_CONFIG_REG
,
2262 FH_MEM_RSSR_SHARED_CTRL_REG
,
2263 FH_MEM_RSSR_RX_STATUS_REG
,
2264 FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV
,
2265 FH_TSSR_TX_STATUS_REG
,
2266 FH_TSSR_TX_ERROR_REG
2268 #ifdef CONFIG_IWLWIFI_DEBUG
2270 bufsz
= ARRAY_SIZE(fh_tbl
) * 48 + 40;
2271 *buf
= kmalloc(bufsz
, GFP_KERNEL
);
2274 pos
+= scnprintf(*buf
+ pos
, bufsz
- pos
,
2275 "FH register values:\n");
2276 for (i
= 0; i
< ARRAY_SIZE(fh_tbl
); i
++) {
2277 pos
+= scnprintf(*buf
+ pos
, bufsz
- pos
,
2279 get_fh_string(fh_tbl
[i
]),
2280 iwl_read_direct32(priv
, fh_tbl
[i
]));
2285 IWL_ERR(priv
, "FH register values:\n");
2286 for (i
= 0; i
< ARRAY_SIZE(fh_tbl
); i
++) {
2287 IWL_ERR(priv
, " %34s: 0X%08x\n",
2288 get_fh_string(fh_tbl
[i
]),
2289 iwl_read_direct32(priv
, fh_tbl
[i
]));
2294 /* notification wait support */
2295 void iwlagn_init_notification_wait(struct iwl_priv
*priv
,
2296 struct iwl_notification_wait
*wait_entry
,
2298 void (*fn
)(struct iwl_priv
*priv
,
2299 struct iwl_rx_packet
*pkt
,
2303 wait_entry
->fn
= fn
;
2304 wait_entry
->fn_data
= fn_data
;
2305 wait_entry
->cmd
= cmd
;
2306 wait_entry
->triggered
= false;
2307 wait_entry
->aborted
= false;
2309 spin_lock_bh(&priv
->_agn
.notif_wait_lock
);
2310 list_add(&wait_entry
->list
, &priv
->_agn
.notif_waits
);
2311 spin_unlock_bh(&priv
->_agn
.notif_wait_lock
);
2314 int iwlagn_wait_notification(struct iwl_priv
*priv
,
2315 struct iwl_notification_wait
*wait_entry
,
2316 unsigned long timeout
)
2320 ret
= wait_event_timeout(priv
->_agn
.notif_waitq
,
2321 wait_entry
->triggered
|| wait_entry
->aborted
,
2324 spin_lock_bh(&priv
->_agn
.notif_wait_lock
);
2325 list_del(&wait_entry
->list
);
2326 spin_unlock_bh(&priv
->_agn
.notif_wait_lock
);
2328 if (wait_entry
->aborted
)
2331 /* return value is always >= 0 */
2337 void iwlagn_remove_notification(struct iwl_priv
*priv
,
2338 struct iwl_notification_wait
*wait_entry
)
2340 spin_lock_bh(&priv
->_agn
.notif_wait_lock
);
2341 list_del(&wait_entry
->list
);
2342 spin_unlock_bh(&priv
->_agn
.notif_wait_lock
);
2345 int iwlagn_start_device(struct iwl_priv
*priv
)
2349 if ((priv
->cfg
->sku
& EEPROM_SKU_CAP_AMT_ENABLE
) &&
2350 iwl_prepare_card_hw(priv
)) {
2351 IWL_WARN(priv
, "Exit HW not ready\n");
2355 /* If platform's RF_KILL switch is NOT set to KILL */
2356 if (iwl_read32(priv
, CSR_GP_CNTRL
) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW
)
2357 clear_bit(STATUS_RF_KILL_HW
, &priv
->status
);
2359 set_bit(STATUS_RF_KILL_HW
, &priv
->status
);
2361 if (iwl_is_rfkill(priv
)) {
2362 wiphy_rfkill_set_hw_state(priv
->hw
->wiphy
, true);
2363 iwl_enable_interrupts(priv
);
2367 iwl_write32(priv
, CSR_INT
, 0xFFFFFFFF);
2369 ret
= iwlagn_hw_nic_init(priv
);
2371 IWL_ERR(priv
, "Unable to init nic\n");
2375 /* make sure rfkill handshake bits are cleared */
2376 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
, CSR_UCODE_SW_BIT_RFKILL
);
2377 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
,
2378 CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED
);
2380 /* clear (again), then enable host interrupts */
2381 iwl_write32(priv
, CSR_INT
, 0xFFFFFFFF);
2382 iwl_enable_interrupts(priv
);
2384 /* really make sure rfkill handshake bits are cleared */
2385 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
, CSR_UCODE_SW_BIT_RFKILL
);
2386 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
, CSR_UCODE_SW_BIT_RFKILL
);
2391 void iwlagn_stop_device(struct iwl_priv
*priv
)
2393 unsigned long flags
;
2395 /* stop and reset the on-board processor */
2396 iwl_write32(priv
, CSR_RESET
, CSR_RESET_REG_FLAG_NEVO_RESET
);
2398 /* tell the device to stop sending interrupts */
2399 spin_lock_irqsave(&priv
->lock
, flags
);
2400 iwl_disable_interrupts(priv
);
2401 spin_unlock_irqrestore(&priv
->lock
, flags
);
2402 iwl_synchronize_irq(priv
);
2404 /* device going down, Stop using ICT table */
2405 iwl_disable_ict(priv
);
2408 * If a HW restart happens during firmware loading,
2409 * then the firmware loading might call this function
2410 * and later it might be called again due to the
2411 * restart. So don't process again if the device is
2414 if (test_bit(STATUS_DEVICE_ENABLED
, &priv
->status
)) {
2415 trans_tx_stop(priv
);
2416 trans_rx_stop(priv
);
2418 /* Power-down device's busmaster DMA clocks */
2419 iwl_write_prph(priv
, APMG_CLK_DIS_REG
,
2420 APMG_CLK_VAL_DMA_CLK_RQT
);
2424 /* Make sure (redundant) we've released our request to stay awake */
2425 iwl_clear_bit(priv
, CSR_GP_CNTRL
, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ
);
2427 /* Stop the device, and put it in low power state */