1 /******************************************************************************
5 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of version 2 of the GNU General Public License as
9 * published by the Free Software Foundation.
11 * This program is distributed in the hope that it will be useful, but
12 * WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 * General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
21 * The full GNU General Public License is included in this distribution
22 * in the file called LICENSE.GPL.
24 * Contact Information:
25 * Intel Linux Wireless <ilw@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
28 *****************************************************************************/
29 #include <linux/etherdevice.h>
30 #include <linux/kernel.h>
31 #include <linux/module.h>
32 #include <linux/init.h>
33 #include <linux/sched.h>
38 #include "iwl-helpers.h"
39 #include "iwl-agn-hw.h"
42 #include "iwl-trans.h"
43 #include "iwl-shared.h"
45 static inline u32
iwlagn_get_scd_ssn(struct iwlagn_tx_resp
*tx_resp
)
47 return le32_to_cpup((__le32
*)&tx_resp
->status
+
48 tx_resp
->frame_count
) & MAX_SN
;
51 static void iwlagn_count_tx_err_status(struct iwl_priv
*priv
, u16 status
)
53 status
&= TX_STATUS_MSK
;
56 case TX_STATUS_POSTPONE_DELAY
:
57 priv
->reply_tx_stats
.pp_delay
++;
59 case TX_STATUS_POSTPONE_FEW_BYTES
:
60 priv
->reply_tx_stats
.pp_few_bytes
++;
62 case TX_STATUS_POSTPONE_BT_PRIO
:
63 priv
->reply_tx_stats
.pp_bt_prio
++;
65 case TX_STATUS_POSTPONE_QUIET_PERIOD
:
66 priv
->reply_tx_stats
.pp_quiet_period
++;
68 case TX_STATUS_POSTPONE_CALC_TTAK
:
69 priv
->reply_tx_stats
.pp_calc_ttak
++;
71 case TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY
:
72 priv
->reply_tx_stats
.int_crossed_retry
++;
74 case TX_STATUS_FAIL_SHORT_LIMIT
:
75 priv
->reply_tx_stats
.short_limit
++;
77 case TX_STATUS_FAIL_LONG_LIMIT
:
78 priv
->reply_tx_stats
.long_limit
++;
80 case TX_STATUS_FAIL_FIFO_UNDERRUN
:
81 priv
->reply_tx_stats
.fifo_underrun
++;
83 case TX_STATUS_FAIL_DRAIN_FLOW
:
84 priv
->reply_tx_stats
.drain_flow
++;
86 case TX_STATUS_FAIL_RFKILL_FLUSH
:
87 priv
->reply_tx_stats
.rfkill_flush
++;
89 case TX_STATUS_FAIL_LIFE_EXPIRE
:
90 priv
->reply_tx_stats
.life_expire
++;
92 case TX_STATUS_FAIL_DEST_PS
:
93 priv
->reply_tx_stats
.dest_ps
++;
95 case TX_STATUS_FAIL_HOST_ABORTED
:
96 priv
->reply_tx_stats
.host_abort
++;
98 case TX_STATUS_FAIL_BT_RETRY
:
99 priv
->reply_tx_stats
.bt_retry
++;
101 case TX_STATUS_FAIL_STA_INVALID
:
102 priv
->reply_tx_stats
.sta_invalid
++;
104 case TX_STATUS_FAIL_FRAG_DROPPED
:
105 priv
->reply_tx_stats
.frag_drop
++;
107 case TX_STATUS_FAIL_TID_DISABLE
:
108 priv
->reply_tx_stats
.tid_disable
++;
110 case TX_STATUS_FAIL_FIFO_FLUSHED
:
111 priv
->reply_tx_stats
.fifo_flush
++;
113 case TX_STATUS_FAIL_INSUFFICIENT_CF_POLL
:
114 priv
->reply_tx_stats
.insuff_cf_poll
++;
116 case TX_STATUS_FAIL_PASSIVE_NO_RX
:
117 priv
->reply_tx_stats
.fail_hw_drop
++;
119 case TX_STATUS_FAIL_NO_BEACON_ON_RADAR
:
120 priv
->reply_tx_stats
.sta_color_mismatch
++;
123 priv
->reply_tx_stats
.unknown
++;
128 static void iwlagn_count_agg_tx_err_status(struct iwl_priv
*priv
, u16 status
)
130 status
&= AGG_TX_STATUS_MSK
;
133 case AGG_TX_STATE_UNDERRUN_MSK
:
134 priv
->reply_agg_tx_stats
.underrun
++;
136 case AGG_TX_STATE_BT_PRIO_MSK
:
137 priv
->reply_agg_tx_stats
.bt_prio
++;
139 case AGG_TX_STATE_FEW_BYTES_MSK
:
140 priv
->reply_agg_tx_stats
.few_bytes
++;
142 case AGG_TX_STATE_ABORT_MSK
:
143 priv
->reply_agg_tx_stats
.abort
++;
145 case AGG_TX_STATE_LAST_SENT_TTL_MSK
:
146 priv
->reply_agg_tx_stats
.last_sent_ttl
++;
148 case AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK
:
149 priv
->reply_agg_tx_stats
.last_sent_try
++;
151 case AGG_TX_STATE_LAST_SENT_BT_KILL_MSK
:
152 priv
->reply_agg_tx_stats
.last_sent_bt_kill
++;
154 case AGG_TX_STATE_SCD_QUERY_MSK
:
155 priv
->reply_agg_tx_stats
.scd_query
++;
157 case AGG_TX_STATE_TEST_BAD_CRC32_MSK
:
158 priv
->reply_agg_tx_stats
.bad_crc32
++;
160 case AGG_TX_STATE_RESPONSE_MSK
:
161 priv
->reply_agg_tx_stats
.response
++;
163 case AGG_TX_STATE_DUMP_TX_MSK
:
164 priv
->reply_agg_tx_stats
.dump_tx
++;
166 case AGG_TX_STATE_DELAY_TX_MSK
:
167 priv
->reply_agg_tx_stats
.delay_tx
++;
170 priv
->reply_agg_tx_stats
.unknown
++;
175 static void iwlagn_set_tx_status(struct iwl_priv
*priv
,
176 struct ieee80211_tx_info
*info
,
177 struct iwl_rxon_context
*ctx
,
178 struct iwlagn_tx_resp
*tx_resp
,
179 int txq_id
, bool is_agg
)
181 u16 status
= le16_to_cpu(tx_resp
->status
.status
);
183 info
->status
.rates
[0].count
= tx_resp
->failure_frame
+ 1;
185 info
->flags
&= ~IEEE80211_TX_CTL_AMPDU
;
186 info
->flags
|= iwl_tx_status_to_mac80211(status
);
187 iwlagn_hwrate_to_tx_control(priv
, le32_to_cpu(tx_resp
->rate_n_flags
),
189 if (!iwl_is_tx_success(status
))
190 iwlagn_count_tx_err_status(priv
, status
);
192 if (status
== TX_STATUS_FAIL_PASSIVE_NO_RX
&&
193 iwl_is_associated_ctx(ctx
) && ctx
->vif
&&
194 ctx
->vif
->type
== NL80211_IFTYPE_STATION
) {
195 ctx
->last_tx_rejected
= true;
196 iwl_stop_queue(priv
, &priv
->txq
[txq_id
]);
199 IWL_DEBUG_TX_REPLY(priv
, "TXQ %d status %s (0x%08x) rate_n_flags "
202 iwl_get_tx_fail_reason(status
), status
,
203 le32_to_cpu(tx_resp
->rate_n_flags
),
204 tx_resp
->failure_frame
);
207 #ifdef CONFIG_IWLWIFI_DEBUG
208 #define AGG_TX_STATE_FAIL(x) case AGG_TX_STATE_ ## x: return #x
210 const char *iwl_get_agg_tx_fail_reason(u16 status
)
212 status
&= AGG_TX_STATUS_MSK
;
214 case AGG_TX_STATE_TRANSMITTED
:
216 AGG_TX_STATE_FAIL(UNDERRUN_MSK
);
217 AGG_TX_STATE_FAIL(BT_PRIO_MSK
);
218 AGG_TX_STATE_FAIL(FEW_BYTES_MSK
);
219 AGG_TX_STATE_FAIL(ABORT_MSK
);
220 AGG_TX_STATE_FAIL(LAST_SENT_TTL_MSK
);
221 AGG_TX_STATE_FAIL(LAST_SENT_TRY_CNT_MSK
);
222 AGG_TX_STATE_FAIL(LAST_SENT_BT_KILL_MSK
);
223 AGG_TX_STATE_FAIL(SCD_QUERY_MSK
);
224 AGG_TX_STATE_FAIL(TEST_BAD_CRC32_MSK
);
225 AGG_TX_STATE_FAIL(RESPONSE_MSK
);
226 AGG_TX_STATE_FAIL(DUMP_TX_MSK
);
227 AGG_TX_STATE_FAIL(DELAY_TX_MSK
);
232 #endif /* CONFIG_IWLWIFI_DEBUG */
234 static int iwlagn_tx_status_reply_tx(struct iwl_priv
*priv
,
235 struct iwl_ht_agg
*agg
,
236 struct iwlagn_tx_resp
*tx_resp
,
237 int txq_id
, u16 start_idx
)
240 struct agg_tx_status
*frame_status
= &tx_resp
->status
;
241 struct ieee80211_hdr
*hdr
= NULL
;
245 if (agg
->wait_for_ba
)
246 IWL_DEBUG_TX_REPLY(priv
, "got tx response w/o block-ack\n");
248 agg
->frame_count
= tx_resp
->frame_count
;
249 agg
->start_idx
= start_idx
;
250 agg
->rate_n_flags
= le32_to_cpu(tx_resp
->rate_n_flags
);
253 /* # frames attempted by Tx command */
254 if (agg
->frame_count
== 1) {
255 struct iwl_tx_info
*txb
;
257 /* Only one frame was attempted; no block-ack will arrive */
260 IWL_DEBUG_TX_REPLY(priv
, "FrameCnt = %d, StartIdx=%d idx=%d\n",
261 agg
->frame_count
, agg
->start_idx
, idx
);
262 txb
= &priv
->txq
[txq_id
].txb
[idx
];
263 iwlagn_set_tx_status(priv
, IEEE80211_SKB_CB(txb
->skb
),
264 txb
->ctx
, tx_resp
, txq_id
, true);
265 agg
->wait_for_ba
= 0;
267 /* Two or more frames were attempted; expect block-ack */
271 * Start is the lowest frame sent. It may not be the first
272 * frame in the batch; we figure this out dynamically during
273 * the following loop.
275 int start
= agg
->start_idx
;
277 /* Construct bit-map of pending frames within Tx window */
278 for (i
= 0; i
< agg
->frame_count
; i
++) {
280 status
= le16_to_cpu(frame_status
[i
].status
);
281 seq
= le16_to_cpu(frame_status
[i
].sequence
);
282 idx
= SEQ_TO_INDEX(seq
);
283 txq_id
= SEQ_TO_QUEUE(seq
);
285 if (status
& AGG_TX_STATUS_MSK
)
286 iwlagn_count_agg_tx_err_status(priv
, status
);
288 if (status
& (AGG_TX_STATE_FEW_BYTES_MSK
|
289 AGG_TX_STATE_ABORT_MSK
))
292 IWL_DEBUG_TX_REPLY(priv
, "FrameCnt = %d, txq_id=%d idx=%d\n",
293 agg
->frame_count
, txq_id
, idx
);
294 IWL_DEBUG_TX_REPLY(priv
, "status %s (0x%08x), "
295 "try-count (0x%08x)\n",
296 iwl_get_agg_tx_fail_reason(status
),
297 status
& AGG_TX_STATUS_MSK
,
298 status
& AGG_TX_TRY_MSK
);
300 hdr
= iwl_tx_queue_get_hdr(priv
, txq_id
, idx
);
303 "BUG_ON idx doesn't point to valid skb"
304 " idx=%d, txq_id=%d\n", idx
, txq_id
);
308 sc
= le16_to_cpu(hdr
->seq_ctrl
);
309 if (idx
!= (SEQ_TO_SN(sc
) & 0xff)) {
311 "BUG_ON idx doesn't match seq control"
312 " idx=%d, seq_idx=%d, seq=%d\n",
318 IWL_DEBUG_TX_REPLY(priv
, "AGG Frame i=%d idx %d seq=%d\n",
319 i
, idx
, SEQ_TO_SN(sc
));
322 * sh -> how many frames ahead of the starting frame is
325 * Note that all frames sent in the batch must be in a
326 * 64-frame window, so this number should be in [0,63].
327 * If outside of this window, then we've found a new
328 * "first" frame in the batch and need to change start.
333 * If >= 64, out of window. start must be at the front
334 * of the circular buffer, idx must be near the end of
335 * the buffer, and idx is the new "first" frame. Shift
336 * the indices around.
339 /* Shift bitmap by start - idx, wrapped */
340 sh
= 0x100 - idx
+ start
;
341 bitmap
= bitmap
<< sh
;
342 /* Now idx is the new start so sh = 0 */
346 * If <= -64 then wraps the 256-pkt circular buffer
347 * (e.g., start = 255 and idx = 0, sh should be 1)
349 } else if (sh
<= -64) {
350 sh
= 0x100 - start
+ idx
;
352 * If < 0 but > -64, out of window. idx is before start
353 * but not wrapped. Shift the indices around.
356 /* Shift by how far start is ahead of idx */
358 bitmap
= bitmap
<< sh
;
359 /* Now idx is the new start so sh = 0 */
363 /* Sequence number start + sh was sent in this batch */
364 bitmap
|= 1ULL << sh
;
365 IWL_DEBUG_TX_REPLY(priv
, "start=%d bitmap=0x%llx\n",
366 start
, (unsigned long long)bitmap
);
370 * Store the bitmap and possibly the new start, if we wrapped
373 agg
->bitmap
= bitmap
;
374 agg
->start_idx
= start
;
375 IWL_DEBUG_TX_REPLY(priv
, "Frames %d start_idx=%d bitmap=0x%llx\n",
376 agg
->frame_count
, agg
->start_idx
,
377 (unsigned long long)agg
->bitmap
);
380 agg
->wait_for_ba
= 1;
385 void iwl_check_abort_status(struct iwl_priv
*priv
,
386 u8 frame_count
, u32 status
)
388 if (frame_count
== 1 && status
== TX_STATUS_FAIL_RFKILL_FLUSH
) {
389 IWL_ERR(priv
, "Tx flush command to flush out all frames\n");
390 if (!test_bit(STATUS_EXIT_PENDING
, &priv
->shrd
->status
))
391 queue_work(priv
->shrd
->workqueue
, &priv
->tx_flush
);
395 void iwlagn_rx_reply_tx(struct iwl_priv
*priv
, struct iwl_rx_mem_buffer
*rxb
)
397 struct iwl_rx_packet
*pkt
= rxb_addr(rxb
);
398 u16 sequence
= le16_to_cpu(pkt
->hdr
.sequence
);
399 int txq_id
= SEQ_TO_QUEUE(sequence
);
400 int index
= SEQ_TO_INDEX(sequence
);
401 struct iwl_tx_queue
*txq
= &priv
->txq
[txq_id
];
402 struct ieee80211_tx_info
*info
;
403 struct iwlagn_tx_resp
*tx_resp
= (void *)&pkt
->u
.raw
[0];
404 struct ieee80211_hdr
*hdr
;
405 struct iwl_tx_info
*txb
;
406 u32 status
= le16_to_cpu(tx_resp
->status
.status
);
412 if ((index
>= txq
->q
.n_bd
) || (iwl_queue_used(&txq
->q
, index
) == 0)) {
413 IWL_ERR(priv
, "%s: Read index for DMA queue txq_id (%d) "
414 "index %d is out of range [0-%d] %d %d\n", __func__
,
415 txq_id
, index
, txq
->q
.n_bd
, txq
->q
.write_ptr
,
420 txq
->time_stamp
= jiffies
;
421 txb
= &txq
->txb
[txq
->q
.read_ptr
];
422 info
= IEEE80211_SKB_CB(txb
->skb
);
423 memset(&info
->status
, 0, sizeof(info
->status
));
425 tid
= (tx_resp
->ra_tid
& IWLAGN_TX_RES_TID_MSK
) >>
426 IWLAGN_TX_RES_TID_POS
;
427 sta_id
= (tx_resp
->ra_tid
& IWLAGN_TX_RES_RA_MSK
) >>
428 IWLAGN_TX_RES_RA_POS
;
430 spin_lock_irqsave(&priv
->shrd
->sta_lock
, flags
);
432 hdr
= (void *)txb
->skb
->data
;
433 if (!ieee80211_is_data_qos(hdr
->frame_control
))
434 priv
->last_seq_ctl
= tx_resp
->seq_ctl
;
436 if (txq
->sched_retry
) {
437 const u32 scd_ssn
= iwlagn_get_scd_ssn(tx_resp
);
438 struct iwl_ht_agg
*agg
;
440 agg
= &priv
->stations
[sta_id
].tid
[tid
].agg
;
442 * If the BT kill count is non-zero, we'll get this
443 * notification again.
445 if (tx_resp
->bt_kill_count
&& tx_resp
->frame_count
== 1 &&
446 priv
->cfg
->bt_params
&&
447 priv
->cfg
->bt_params
->advanced_bt_coexist
) {
448 IWL_DEBUG_COEX(priv
, "receive reply tx with bt_kill\n");
450 iwlagn_tx_status_reply_tx(priv
, agg
, tx_resp
, txq_id
, index
);
452 /* check if BAR is needed */
453 if ((tx_resp
->frame_count
== 1) && !iwl_is_tx_success(status
))
454 info
->flags
|= IEEE80211_TX_STAT_AMPDU_NO_BACK
;
456 if (txq
->q
.read_ptr
!= (scd_ssn
& 0xff)) {
457 index
= iwl_queue_dec_wrap(scd_ssn
& 0xff, txq
->q
.n_bd
);
458 IWL_DEBUG_TX_REPLY(priv
, "Retry scheduler reclaim "
459 "scd_ssn=%d idx=%d txq=%d swq=%d\n",
460 scd_ssn
, index
, txq_id
, txq
->swq_id
);
462 freed
= iwlagn_tx_queue_reclaim(priv
, txq_id
, index
);
463 iwl_free_tfds_in_queue(priv
, sta_id
, tid
, freed
);
465 if (priv
->mac80211_registered
&&
466 (iwl_queue_space(&txq
->q
) > txq
->q
.low_mark
) &&
467 (agg
->state
!= IWL_EMPTYING_HW_QUEUE_DELBA
))
468 iwl_wake_queue(priv
, txq
);
471 iwlagn_set_tx_status(priv
, info
, txb
->ctx
, tx_resp
,
473 freed
= iwlagn_tx_queue_reclaim(priv
, txq_id
, index
);
474 iwl_free_tfds_in_queue(priv
, sta_id
, tid
, freed
);
476 if (priv
->mac80211_registered
&&
477 iwl_queue_space(&txq
->q
) > txq
->q
.low_mark
&&
478 status
!= TX_STATUS_FAIL_PASSIVE_NO_RX
)
479 iwl_wake_queue(priv
, txq
);
482 iwlagn_txq_check_empty(priv
, sta_id
, tid
, txq_id
);
484 iwl_check_abort_status(priv
, tx_resp
->frame_count
, status
);
485 spin_unlock_irqrestore(&priv
->shrd
->sta_lock
, flags
);
488 int iwlagn_hw_valid_rtc_data_addr(u32 addr
)
490 return (addr
>= IWLAGN_RTC_DATA_LOWER_BOUND
) &&
491 (addr
< IWLAGN_RTC_DATA_UPPER_BOUND
);
494 int iwlagn_send_tx_power(struct iwl_priv
*priv
)
496 struct iwlagn_tx_power_dbm_cmd tx_power_cmd
;
499 if (WARN_ONCE(test_bit(STATUS_SCAN_HW
, &priv
->shrd
->status
),
500 "TX Power requested while scanning!\n"))
503 /* half dBm need to multiply */
504 tx_power_cmd
.global_lmt
= (s8
)(2 * priv
->tx_power_user_lmt
);
506 if (priv
->tx_power_lmt_in_half_dbm
&&
507 priv
->tx_power_lmt_in_half_dbm
< tx_power_cmd
.global_lmt
) {
509 * For the newer devices which using enhanced/extend tx power
510 * table in EEPROM, the format is in half dBm. driver need to
511 * convert to dBm format before report to mac80211.
512 * By doing so, there is a possibility of 1/2 dBm resolution
513 * lost. driver will perform "round-up" operation before
514 * reporting, but it will cause 1/2 dBm tx power over the
515 * regulatory limit. Perform the checking here, if the
516 * "tx_power_user_lmt" is higher than EEPROM value (in
517 * half-dBm format), lower the tx power based on EEPROM
519 tx_power_cmd
.global_lmt
= priv
->tx_power_lmt_in_half_dbm
;
521 tx_power_cmd
.flags
= IWLAGN_TX_POWER_NO_CLOSED
;
522 tx_power_cmd
.srv_chan_lmt
= IWLAGN_TX_POWER_AUTO
;
524 if (IWL_UCODE_API(priv
->ucode_ver
) == 1)
525 tx_ant_cfg_cmd
= REPLY_TX_POWER_DBM_CMD_V1
;
527 tx_ant_cfg_cmd
= REPLY_TX_POWER_DBM_CMD
;
529 return trans_send_cmd_pdu(&priv
->trans
, tx_ant_cfg_cmd
, CMD_SYNC
,
530 sizeof(tx_power_cmd
), &tx_power_cmd
);
533 void iwlagn_temperature(struct iwl_priv
*priv
)
535 /* store temperature from correct statistics (in Celsius) */
536 priv
->temperature
= le32_to_cpu(priv
->statistics
.common
.temperature
);
537 iwl_tt_handler(priv
);
540 u16
iwlagn_eeprom_calib_version(struct iwl_priv
*priv
)
542 struct iwl_eeprom_calib_hdr
{
548 hdr
= (struct iwl_eeprom_calib_hdr
*)iwl_eeprom_query_addr(priv
,
557 static u32
eeprom_indirect_address(const struct iwl_priv
*priv
, u32 address
)
561 if ((address
& INDIRECT_ADDRESS
) == 0)
564 switch (address
& INDIRECT_TYPE_MSK
) {
566 offset
= iwl_eeprom_query16(priv
, EEPROM_LINK_HOST
);
568 case INDIRECT_GENERAL
:
569 offset
= iwl_eeprom_query16(priv
, EEPROM_LINK_GENERAL
);
571 case INDIRECT_REGULATORY
:
572 offset
= iwl_eeprom_query16(priv
, EEPROM_LINK_REGULATORY
);
574 case INDIRECT_TXP_LIMIT
:
575 offset
= iwl_eeprom_query16(priv
, EEPROM_LINK_TXP_LIMIT
);
577 case INDIRECT_TXP_LIMIT_SIZE
:
578 offset
= iwl_eeprom_query16(priv
, EEPROM_LINK_TXP_LIMIT_SIZE
);
580 case INDIRECT_CALIBRATION
:
581 offset
= iwl_eeprom_query16(priv
, EEPROM_LINK_CALIBRATION
);
583 case INDIRECT_PROCESS_ADJST
:
584 offset
= iwl_eeprom_query16(priv
, EEPROM_LINK_PROCESS_ADJST
);
586 case INDIRECT_OTHERS
:
587 offset
= iwl_eeprom_query16(priv
, EEPROM_LINK_OTHERS
);
590 IWL_ERR(priv
, "illegal indirect type: 0x%X\n",
591 address
& INDIRECT_TYPE_MSK
);
595 /* translate the offset from words to byte */
596 return (address
& ADDRESS_MSK
) + (offset
<< 1);
599 const u8
*iwl_eeprom_query_addr(const struct iwl_priv
*priv
, size_t offset
)
601 u32 address
= eeprom_indirect_address(priv
, offset
);
602 BUG_ON(address
>= priv
->cfg
->base_params
->eeprom_size
);
603 return &priv
->eeprom
[address
];
606 struct iwl_mod_params iwlagn_mod_params
= {
610 .bt_coex_active
= true,
611 .no_sleep_autoadjust
= true,
612 .power_level
= IWL_POWER_INDEX_1
,
614 .wanted_ucode_alternative
= 1,
615 /* the rest are 0 by default */
618 int iwlagn_hwrate_to_mac80211_idx(u32 rate_n_flags
, enum ieee80211_band band
)
623 /* HT rate format: mac80211 wants an MCS number, which is just LSB */
624 if (rate_n_flags
& RATE_MCS_HT_MSK
) {
625 idx
= (rate_n_flags
& 0xff);
627 /* Legacy rate format, search for match in table */
629 if (band
== IEEE80211_BAND_5GHZ
)
630 band_offset
= IWL_FIRST_OFDM_RATE
;
631 for (idx
= band_offset
; idx
< IWL_RATE_COUNT_LEGACY
; idx
++)
632 if (iwl_rates
[idx
].plcp
== (rate_n_flags
& 0xFF))
633 return idx
- band_offset
;
639 static int iwl_get_single_channel_for_scan(struct iwl_priv
*priv
,
640 struct ieee80211_vif
*vif
,
641 enum ieee80211_band band
,
642 struct iwl_scan_channel
*scan_ch
)
644 const struct ieee80211_supported_band
*sband
;
645 u16 passive_dwell
= 0;
646 u16 active_dwell
= 0;
650 sband
= iwl_get_hw_mode(priv
, band
);
652 IWL_ERR(priv
, "invalid band\n");
656 active_dwell
= iwl_get_active_dwell_time(priv
, band
, 0);
657 passive_dwell
= iwl_get_passive_dwell_time(priv
, band
, vif
);
659 if (passive_dwell
<= active_dwell
)
660 passive_dwell
= active_dwell
+ 1;
662 channel
= iwl_get_single_channel_number(priv
, band
);
664 scan_ch
->channel
= cpu_to_le16(channel
);
665 scan_ch
->type
= SCAN_CHANNEL_TYPE_PASSIVE
;
666 scan_ch
->active_dwell
= cpu_to_le16(active_dwell
);
667 scan_ch
->passive_dwell
= cpu_to_le16(passive_dwell
);
668 /* Set txpower levels to defaults */
669 scan_ch
->dsp_atten
= 110;
670 if (band
== IEEE80211_BAND_5GHZ
)
671 scan_ch
->tx_gain
= ((1 << 5) | (3 << 3)) | 3;
673 scan_ch
->tx_gain
= ((1 << 5) | (5 << 3));
676 IWL_ERR(priv
, "no valid channel found\n");
680 static int iwl_get_channels_for_scan(struct iwl_priv
*priv
,
681 struct ieee80211_vif
*vif
,
682 enum ieee80211_band band
,
683 u8 is_active
, u8 n_probes
,
684 struct iwl_scan_channel
*scan_ch
)
686 struct ieee80211_channel
*chan
;
687 const struct ieee80211_supported_band
*sband
;
688 const struct iwl_channel_info
*ch_info
;
689 u16 passive_dwell
= 0;
690 u16 active_dwell
= 0;
694 sband
= iwl_get_hw_mode(priv
, band
);
698 active_dwell
= iwl_get_active_dwell_time(priv
, band
, n_probes
);
699 passive_dwell
= iwl_get_passive_dwell_time(priv
, band
, vif
);
701 if (passive_dwell
<= active_dwell
)
702 passive_dwell
= active_dwell
+ 1;
704 for (i
= 0, added
= 0; i
< priv
->scan_request
->n_channels
; i
++) {
705 chan
= priv
->scan_request
->channels
[i
];
707 if (chan
->band
!= band
)
710 channel
= chan
->hw_value
;
711 scan_ch
->channel
= cpu_to_le16(channel
);
713 ch_info
= iwl_get_channel_info(priv
, band
, channel
);
714 if (!is_channel_valid(ch_info
)) {
715 IWL_DEBUG_SCAN(priv
, "Channel %d is INVALID for this band.\n",
720 if (!is_active
|| is_channel_passive(ch_info
) ||
721 (chan
->flags
& IEEE80211_CHAN_PASSIVE_SCAN
))
722 scan_ch
->type
= SCAN_CHANNEL_TYPE_PASSIVE
;
724 scan_ch
->type
= SCAN_CHANNEL_TYPE_ACTIVE
;
727 scan_ch
->type
|= IWL_SCAN_PROBE_MASK(n_probes
);
729 scan_ch
->active_dwell
= cpu_to_le16(active_dwell
);
730 scan_ch
->passive_dwell
= cpu_to_le16(passive_dwell
);
732 /* Set txpower levels to defaults */
733 scan_ch
->dsp_atten
= 110;
735 /* NOTE: if we were doing 6Mb OFDM for scans we'd use
737 * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
739 if (band
== IEEE80211_BAND_5GHZ
)
740 scan_ch
->tx_gain
= ((1 << 5) | (3 << 3)) | 3;
742 scan_ch
->tx_gain
= ((1 << 5) | (5 << 3));
744 IWL_DEBUG_SCAN(priv
, "Scanning ch=%d prob=0x%X [%s %d]\n",
745 channel
, le32_to_cpu(scan_ch
->type
),
746 (scan_ch
->type
& SCAN_CHANNEL_TYPE_ACTIVE
) ?
747 "ACTIVE" : "PASSIVE",
748 (scan_ch
->type
& SCAN_CHANNEL_TYPE_ACTIVE
) ?
749 active_dwell
: passive_dwell
);
755 IWL_DEBUG_SCAN(priv
, "total channels to scan %d\n", added
);
759 int iwlagn_request_scan(struct iwl_priv
*priv
, struct ieee80211_vif
*vif
)
761 struct iwl_host_cmd cmd
= {
762 .id
= REPLY_SCAN_CMD
,
763 .len
= { sizeof(struct iwl_scan_cmd
), },
766 struct iwl_scan_cmd
*scan
;
767 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
771 enum ieee80211_band band
;
773 u8 rx_ant
= hw_params(priv
).valid_rx_ant
;
775 bool is_active
= false;
778 u8 scan_tx_antennas
= hw_params(priv
).valid_tx_ant
;
781 lockdep_assert_held(&priv
->shrd
->mutex
);
784 ctx
= iwl_rxon_ctx_from_vif(vif
);
786 if (!priv
->scan_cmd
) {
787 priv
->scan_cmd
= kmalloc(sizeof(struct iwl_scan_cmd
) +
788 IWL_MAX_SCAN_SIZE
, GFP_KERNEL
);
789 if (!priv
->scan_cmd
) {
791 "fail to allocate memory for scan\n");
795 scan
= priv
->scan_cmd
;
796 memset(scan
, 0, sizeof(struct iwl_scan_cmd
) + IWL_MAX_SCAN_SIZE
);
798 scan
->quiet_plcp_th
= IWL_PLCP_QUIET_THRESH
;
799 scan
->quiet_time
= IWL_ACTIVE_QUIET_TIME
;
801 if (priv
->scan_type
!= IWL_SCAN_ROC
&&
802 iwl_is_any_associated(priv
)) {
805 u32 suspend_time
= 100;
806 u32 scan_suspend_time
= 100;
808 IWL_DEBUG_INFO(priv
, "Scanning while associated...\n");
809 switch (priv
->scan_type
) {
813 case IWL_SCAN_RADIO_RESET
:
816 case IWL_SCAN_NORMAL
:
817 interval
= vif
->bss_conf
.beacon_int
;
821 scan
->suspend_time
= 0;
822 scan
->max_out_time
= cpu_to_le32(200 * 1024);
824 interval
= suspend_time
;
826 extra
= (suspend_time
/ interval
) << 22;
827 scan_suspend_time
= (extra
|
828 ((suspend_time
% interval
) * 1024));
829 scan
->suspend_time
= cpu_to_le32(scan_suspend_time
);
830 IWL_DEBUG_SCAN(priv
, "suspend_time 0x%X beacon interval %d\n",
831 scan_suspend_time
, interval
);
832 } else if (priv
->scan_type
== IWL_SCAN_ROC
) {
833 scan
->suspend_time
= 0;
834 scan
->max_out_time
= 0;
835 scan
->quiet_time
= 0;
836 scan
->quiet_plcp_th
= 0;
839 switch (priv
->scan_type
) {
840 case IWL_SCAN_RADIO_RESET
:
841 IWL_DEBUG_SCAN(priv
, "Start internal passive scan.\n");
843 case IWL_SCAN_NORMAL
:
844 if (priv
->scan_request
->n_ssids
) {
846 IWL_DEBUG_SCAN(priv
, "Kicking off active scan\n");
847 for (i
= 0; i
< priv
->scan_request
->n_ssids
; i
++) {
848 /* always does wildcard anyway */
849 if (!priv
->scan_request
->ssids
[i
].ssid_len
)
851 scan
->direct_scan
[p
].id
= WLAN_EID_SSID
;
852 scan
->direct_scan
[p
].len
=
853 priv
->scan_request
->ssids
[i
].ssid_len
;
854 memcpy(scan
->direct_scan
[p
].ssid
,
855 priv
->scan_request
->ssids
[i
].ssid
,
856 priv
->scan_request
->ssids
[i
].ssid_len
);
862 IWL_DEBUG_SCAN(priv
, "Start passive scan.\n");
865 IWL_DEBUG_SCAN(priv
, "Start ROC scan.\n");
869 scan
->tx_cmd
.tx_flags
= TX_CMD_FLG_SEQ_CTL_MSK
;
870 scan
->tx_cmd
.sta_id
= ctx
->bcast_sta_id
;
871 scan
->tx_cmd
.stop_time
.life_time
= TX_CMD_LIFE_TIME_INFINITE
;
873 switch (priv
->scan_band
) {
874 case IEEE80211_BAND_2GHZ
:
875 scan
->flags
= RXON_FLG_BAND_24G_MSK
| RXON_FLG_AUTO_DETECT_MSK
;
876 chan_mod
= le32_to_cpu(
877 priv
->contexts
[IWL_RXON_CTX_BSS
].active
.flags
&
878 RXON_FLG_CHANNEL_MODE_MSK
)
879 >> RXON_FLG_CHANNEL_MODE_POS
;
880 if (chan_mod
== CHANNEL_MODE_PURE_40
) {
881 rate
= IWL_RATE_6M_PLCP
;
883 rate
= IWL_RATE_1M_PLCP
;
884 rate_flags
= RATE_MCS_CCK_MSK
;
887 * Internal scans are passive, so we can indiscriminately set
888 * the BT ignore flag on 2.4 GHz since it applies to TX only.
890 if (priv
->cfg
->bt_params
&&
891 priv
->cfg
->bt_params
->advanced_bt_coexist
)
892 scan
->tx_cmd
.tx_flags
|= TX_CMD_FLG_IGNORE_BT
;
894 case IEEE80211_BAND_5GHZ
:
895 rate
= IWL_RATE_6M_PLCP
;
898 IWL_WARN(priv
, "Invalid scan band\n");
903 * If active scanning is requested but a certain channel is
904 * marked passive, we can do active scanning if we detect
907 * There is an issue with some firmware versions that triggers
908 * a sysassert on a "good CRC threshold" of zero (== disabled),
909 * on a radar channel even though this means that we should NOT
912 * The "good CRC threshold" is the number of frames that we
913 * need to receive during our dwell time on a channel before
914 * sending out probes -- setting this to a huge value will
915 * mean we never reach it, but at the same time work around
916 * the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER
917 * here instead of IWL_GOOD_CRC_TH_DISABLED.
919 * This was fixed in later versions along with some other
920 * scan changes, and the threshold behaves as a flag in those
923 if (priv
->new_scan_threshold_behaviour
)
924 scan
->good_CRC_th
= is_active
? IWL_GOOD_CRC_TH_DEFAULT
:
925 IWL_GOOD_CRC_TH_DISABLED
;
927 scan
->good_CRC_th
= is_active
? IWL_GOOD_CRC_TH_DEFAULT
:
928 IWL_GOOD_CRC_TH_NEVER
;
930 band
= priv
->scan_band
;
932 if (priv
->cfg
->scan_rx_antennas
[band
])
933 rx_ant
= priv
->cfg
->scan_rx_antennas
[band
];
935 if (band
== IEEE80211_BAND_2GHZ
&&
936 priv
->cfg
->bt_params
&&
937 priv
->cfg
->bt_params
->advanced_bt_coexist
) {
938 /* transmit 2.4 GHz probes only on first antenna */
939 scan_tx_antennas
= first_antenna(scan_tx_antennas
);
942 priv
->scan_tx_ant
[band
] = iwl_toggle_tx_ant(priv
, priv
->scan_tx_ant
[band
],
944 rate_flags
|= iwl_ant_idx_to_flags(priv
->scan_tx_ant
[band
]);
945 scan
->tx_cmd
.rate_n_flags
= iwl_hw_set_rate_n_flags(rate
, rate_flags
);
947 /* In power save mode use one chain, otherwise use all chains */
948 if (test_bit(STATUS_POWER_PMI
, &priv
->shrd
->status
)) {
949 /* rx_ant has been set to all valid chains previously */
950 active_chains
= rx_ant
&
951 ((u8
)(priv
->chain_noise_data
.active_chains
));
953 active_chains
= rx_ant
;
955 IWL_DEBUG_SCAN(priv
, "chain_noise_data.active_chains: %u\n",
956 priv
->chain_noise_data
.active_chains
);
958 rx_ant
= first_antenna(active_chains
);
960 if (priv
->cfg
->bt_params
&&
961 priv
->cfg
->bt_params
->advanced_bt_coexist
&&
962 priv
->bt_full_concurrent
) {
963 /* operated as 1x1 in full concurrency mode */
964 rx_ant
= first_antenna(rx_ant
);
967 /* MIMO is not used here, but value is required */
969 hw_params(priv
).valid_rx_ant
<< RXON_RX_CHAIN_VALID_POS
;
970 rx_chain
|= rx_ant
<< RXON_RX_CHAIN_FORCE_MIMO_SEL_POS
;
971 rx_chain
|= rx_ant
<< RXON_RX_CHAIN_FORCE_SEL_POS
;
972 rx_chain
|= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS
;
973 scan
->rx_chain
= cpu_to_le16(rx_chain
);
974 switch (priv
->scan_type
) {
975 case IWL_SCAN_NORMAL
:
976 cmd_len
= iwl_fill_probe_req(priv
,
977 (struct ieee80211_mgmt
*)scan
->data
,
979 priv
->scan_request
->ie
,
980 priv
->scan_request
->ie_len
,
981 IWL_MAX_SCAN_SIZE
- sizeof(*scan
));
983 case IWL_SCAN_RADIO_RESET
:
985 /* use bcast addr, will not be transmitted but must be valid */
986 cmd_len
= iwl_fill_probe_req(priv
,
987 (struct ieee80211_mgmt
*)scan
->data
,
988 iwl_bcast_addr
, NULL
, 0,
989 IWL_MAX_SCAN_SIZE
- sizeof(*scan
));
994 scan
->tx_cmd
.len
= cpu_to_le16(cmd_len
);
996 scan
->filter_flags
|= (RXON_FILTER_ACCEPT_GRP_MSK
|
997 RXON_FILTER_BCON_AWARE_MSK
);
999 switch (priv
->scan_type
) {
1000 case IWL_SCAN_RADIO_RESET
:
1001 scan
->channel_count
=
1002 iwl_get_single_channel_for_scan(priv
, vif
, band
,
1003 (void *)&scan
->data
[cmd_len
]);
1005 case IWL_SCAN_NORMAL
:
1006 scan
->channel_count
=
1007 iwl_get_channels_for_scan(priv
, vif
, band
,
1008 is_active
, n_probes
,
1009 (void *)&scan
->data
[cmd_len
]);
1011 case IWL_SCAN_ROC
: {
1012 struct iwl_scan_channel
*scan_ch
;
1014 scan
->channel_count
= 1;
1016 scan_ch
= (void *)&scan
->data
[cmd_len
];
1017 scan_ch
->type
= SCAN_CHANNEL_TYPE_PASSIVE
;
1019 cpu_to_le16(priv
->hw_roc_channel
->hw_value
);
1020 scan_ch
->active_dwell
=
1021 scan_ch
->passive_dwell
=
1022 cpu_to_le16(priv
->hw_roc_duration
);
1024 /* Set txpower levels to defaults */
1025 scan_ch
->dsp_atten
= 110;
1027 /* NOTE: if we were doing 6Mb OFDM for scans we'd use
1029 * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
1031 if (priv
->hw_roc_channel
->band
== IEEE80211_BAND_5GHZ
)
1032 scan_ch
->tx_gain
= ((1 << 5) | (3 << 3)) | 3;
1034 scan_ch
->tx_gain
= ((1 << 5) | (5 << 3));
1039 if (scan
->channel_count
== 0) {
1040 IWL_DEBUG_SCAN(priv
, "channel count %d\n", scan
->channel_count
);
1044 cmd
.len
[0] += le16_to_cpu(scan
->tx_cmd
.len
) +
1045 scan
->channel_count
* sizeof(struct iwl_scan_channel
);
1047 cmd
.dataflags
[0] = IWL_HCMD_DFL_NOCOPY
;
1048 scan
->len
= cpu_to_le16(cmd
.len
[0]);
1050 /* set scan bit here for PAN params */
1051 set_bit(STATUS_SCAN_HW
, &priv
->shrd
->status
);
1053 ret
= iwlagn_set_pan_params(priv
);
1057 ret
= trans_send_cmd(&priv
->trans
, &cmd
);
1059 clear_bit(STATUS_SCAN_HW
, &priv
->shrd
->status
);
1060 iwlagn_set_pan_params(priv
);
1066 int iwlagn_manage_ibss_station(struct iwl_priv
*priv
,
1067 struct ieee80211_vif
*vif
, bool add
)
1069 struct iwl_vif_priv
*vif_priv
= (void *)vif
->drv_priv
;
1072 return iwlagn_add_bssid_station(priv
, vif_priv
->ctx
,
1073 vif
->bss_conf
.bssid
,
1074 &vif_priv
->ibss_bssid_sta_id
);
1075 return iwl_remove_station(priv
, vif_priv
->ibss_bssid_sta_id
,
1076 vif
->bss_conf
.bssid
);
1079 void iwl_free_tfds_in_queue(struct iwl_priv
*priv
,
1080 int sta_id
, int tid
, int freed
)
1082 lockdep_assert_held(&priv
->shrd
->sta_lock
);
1084 if (priv
->stations
[sta_id
].tid
[tid
].tfds_in_queue
>= freed
)
1085 priv
->stations
[sta_id
].tid
[tid
].tfds_in_queue
-= freed
;
1087 IWL_DEBUG_TX(priv
, "free more than tfds_in_queue (%u:%d)\n",
1088 priv
->stations
[sta_id
].tid
[tid
].tfds_in_queue
,
1090 priv
->stations
[sta_id
].tid
[tid
].tfds_in_queue
= 0;
1094 #define IWL_FLUSH_WAIT_MS 2000
1096 int iwlagn_wait_tx_queue_empty(struct iwl_priv
*priv
)
1098 struct iwl_tx_queue
*txq
;
1099 struct iwl_queue
*q
;
1101 unsigned long now
= jiffies
;
1104 /* waiting for all the tx frames complete might take a while */
1105 for (cnt
= 0; cnt
< hw_params(priv
).max_txq_num
; cnt
++) {
1106 if (cnt
== priv
->shrd
->cmd_queue
)
1108 txq
= &priv
->txq
[cnt
];
1110 while (q
->read_ptr
!= q
->write_ptr
&& !time_after(jiffies
,
1111 now
+ msecs_to_jiffies(IWL_FLUSH_WAIT_MS
)))
1114 if (q
->read_ptr
!= q
->write_ptr
) {
1115 IWL_ERR(priv
, "fail to flush all tx fifo queues\n");
1123 #define IWL_TX_QUEUE_MSK 0xfffff
1126 * iwlagn_txfifo_flush: send REPLY_TXFIFO_FLUSH command to uCode
1129 * 1. acquire mutex before calling
1130 * 2. make sure rf is on and not in exit state
1132 int iwlagn_txfifo_flush(struct iwl_priv
*priv
, u16 flush_control
)
1134 struct iwl_txfifo_flush_cmd flush_cmd
;
1135 struct iwl_host_cmd cmd
= {
1136 .id
= REPLY_TXFIFO_FLUSH
,
1137 .len
= { sizeof(struct iwl_txfifo_flush_cmd
), },
1139 .data
= { &flush_cmd
, },
1144 memset(&flush_cmd
, 0, sizeof(flush_cmd
));
1145 if (flush_control
& BIT(IWL_RXON_CTX_BSS
))
1146 flush_cmd
.fifo_control
= IWL_SCD_VO_MSK
| IWL_SCD_VI_MSK
|
1147 IWL_SCD_BE_MSK
| IWL_SCD_BK_MSK
|
1149 if ((flush_control
& BIT(IWL_RXON_CTX_PAN
)) &&
1150 (priv
->valid_contexts
!= BIT(IWL_RXON_CTX_BSS
)))
1151 flush_cmd
.fifo_control
|= IWL_PAN_SCD_VO_MSK
|
1152 IWL_PAN_SCD_VI_MSK
| IWL_PAN_SCD_BE_MSK
|
1153 IWL_PAN_SCD_BK_MSK
| IWL_PAN_SCD_MGMT_MSK
|
1154 IWL_PAN_SCD_MULTICAST_MSK
;
1156 if (priv
->cfg
->sku
& EEPROM_SKU_CAP_11N_ENABLE
)
1157 flush_cmd
.fifo_control
|= IWL_AGG_TX_QUEUE_MSK
;
1159 IWL_DEBUG_INFO(priv
, "fifo queue control: 0X%x\n",
1160 flush_cmd
.fifo_control
);
1161 flush_cmd
.flush_control
= cpu_to_le16(flush_control
);
1163 return trans_send_cmd(&priv
->trans
, &cmd
);
1166 void iwlagn_dev_txfifo_flush(struct iwl_priv
*priv
, u16 flush_control
)
1168 mutex_lock(&priv
->shrd
->mutex
);
1169 ieee80211_stop_queues(priv
->hw
);
1170 if (iwlagn_txfifo_flush(priv
, IWL_DROP_ALL
)) {
1171 IWL_ERR(priv
, "flush request fail\n");
1174 IWL_DEBUG_INFO(priv
, "wait transmit/flush all frames\n");
1175 iwlagn_wait_tx_queue_empty(priv
);
1177 ieee80211_wake_queues(priv
->hw
);
1178 mutex_unlock(&priv
->shrd
->mutex
);
1185 * Macros to access the lookup table.
1187 * The lookup table has 7 inputs: bt3_prio, bt3_txrx, bt_rf_act, wifi_req,
1188 * wifi_prio, wifi_txrx and wifi_sh_ant_req.
1190 * It has three outputs: WLAN_ACTIVE, WLAN_KILL and ANT_SWITCH
1192 * The format is that "registers" 8 through 11 contain the WLAN_ACTIVE bits
1193 * one after another in 32-bit registers, and "registers" 0 through 7 contain
1194 * the WLAN_KILL and ANT_SWITCH bits interleaved (in that order).
1196 * These macros encode that format.
1198 #define LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, wifi_req, wifi_prio, \
1199 wifi_txrx, wifi_sh_ant_req) \
1200 (bt3_prio | (bt3_txrx << 1) | (bt_rf_act << 2) | (wifi_req << 3) | \
1201 (wifi_prio << 4) | (wifi_txrx << 5) | (wifi_sh_ant_req << 6))
1203 #define LUT_PTA_WLAN_ACTIVE_OP(lut, op, val) \
1204 lut[8 + ((val) >> 5)] op (cpu_to_le32(BIT((val) & 0x1f)))
1205 #define LUT_TEST_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1206 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1207 (!!(LUT_PTA_WLAN_ACTIVE_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, \
1208 bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \
1210 #define LUT_SET_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1211 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1212 LUT_PTA_WLAN_ACTIVE_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, \
1213 bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \
1215 #define LUT_CLEAR_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, \
1216 wifi_req, wifi_prio, wifi_txrx, \
1218 LUT_PTA_WLAN_ACTIVE_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, \
1219 bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \
1222 #define LUT_WLAN_KILL_OP(lut, op, val) \
1223 lut[(val) >> 4] op (cpu_to_le32(BIT(((val) << 1) & 0x1e)))
1224 #define LUT_TEST_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1225 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1226 (!!(LUT_WLAN_KILL_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1227 wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))))
1228 #define LUT_SET_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1229 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1230 LUT_WLAN_KILL_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1231 wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
1232 #define LUT_CLEAR_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1233 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1234 LUT_WLAN_KILL_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1235 wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
1237 #define LUT_ANT_SWITCH_OP(lut, op, val) \
1238 lut[(val) >> 4] op (cpu_to_le32(BIT((((val) << 1) & 0x1e) + 1)))
1239 #define LUT_TEST_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1240 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1241 (!!(LUT_ANT_SWITCH_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1242 wifi_req, wifi_prio, wifi_txrx, \
1244 #define LUT_SET_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1245 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1246 LUT_ANT_SWITCH_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1247 wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
1248 #define LUT_CLEAR_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1249 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1250 LUT_ANT_SWITCH_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1251 wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
1253 static const __le32 iwlagn_def_3w_lookup
[12] = {
1254 cpu_to_le32(0xaaaaaaaa),
1255 cpu_to_le32(0xaaaaaaaa),
1256 cpu_to_le32(0xaeaaaaaa),
1257 cpu_to_le32(0xaaaaaaaa),
1258 cpu_to_le32(0xcc00ff28),
1259 cpu_to_le32(0x0000aaaa),
1260 cpu_to_le32(0xcc00aaaa),
1261 cpu_to_le32(0x0000aaaa),
1262 cpu_to_le32(0xc0004000),
1263 cpu_to_le32(0x00004000),
1264 cpu_to_le32(0xf0005000),
1265 cpu_to_le32(0xf0005000),
1268 static const __le32 iwlagn_concurrent_lookup
[12] = {
1269 cpu_to_le32(0xaaaaaaaa),
1270 cpu_to_le32(0xaaaaaaaa),
1271 cpu_to_le32(0xaaaaaaaa),
1272 cpu_to_le32(0xaaaaaaaa),
1273 cpu_to_le32(0xaaaaaaaa),
1274 cpu_to_le32(0xaaaaaaaa),
1275 cpu_to_le32(0xaaaaaaaa),
1276 cpu_to_le32(0xaaaaaaaa),
1277 cpu_to_le32(0x00000000),
1278 cpu_to_le32(0x00000000),
1279 cpu_to_le32(0x00000000),
1280 cpu_to_le32(0x00000000),
1283 void iwlagn_send_advance_bt_config(struct iwl_priv
*priv
)
1285 struct iwl_basic_bt_cmd basic
= {
1286 .max_kill
= IWLAGN_BT_MAX_KILL_DEFAULT
,
1287 .bt3_timer_t7_value
= IWLAGN_BT3_T7_DEFAULT
,
1288 .bt3_prio_sample_time
= IWLAGN_BT3_PRIO_SAMPLE_DEFAULT
,
1289 .bt3_timer_t2_value
= IWLAGN_BT3_T2_DEFAULT
,
1291 struct iwl6000_bt_cmd bt_cmd_6000
;
1292 struct iwl2000_bt_cmd bt_cmd_2000
;
1295 BUILD_BUG_ON(sizeof(iwlagn_def_3w_lookup
) !=
1296 sizeof(basic
.bt3_lookup_table
));
1298 if (priv
->cfg
->bt_params
) {
1299 if (priv
->cfg
->bt_params
->bt_session_2
) {
1300 bt_cmd_2000
.prio_boost
= cpu_to_le32(
1301 priv
->cfg
->bt_params
->bt_prio_boost
);
1302 bt_cmd_2000
.tx_prio_boost
= 0;
1303 bt_cmd_2000
.rx_prio_boost
= 0;
1305 bt_cmd_6000
.prio_boost
=
1306 priv
->cfg
->bt_params
->bt_prio_boost
;
1307 bt_cmd_6000
.tx_prio_boost
= 0;
1308 bt_cmd_6000
.rx_prio_boost
= 0;
1311 IWL_ERR(priv
, "failed to construct BT Coex Config\n");
1315 basic
.kill_ack_mask
= priv
->kill_ack_mask
;
1316 basic
.kill_cts_mask
= priv
->kill_cts_mask
;
1317 basic
.valid
= priv
->bt_valid
;
1320 * Configure BT coex mode to "no coexistence" when the
1321 * user disabled BT coexistence, we have no interface
1322 * (might be in monitor mode), or the interface is in
1323 * IBSS mode (no proper uCode support for coex then).
1325 if (!iwlagn_mod_params
.bt_coex_active
||
1326 priv
->iw_mode
== NL80211_IFTYPE_ADHOC
) {
1327 basic
.flags
= IWLAGN_BT_FLAG_COEX_MODE_DISABLED
;
1329 basic
.flags
= IWLAGN_BT_FLAG_COEX_MODE_3W
<<
1330 IWLAGN_BT_FLAG_COEX_MODE_SHIFT
;
1332 if (!priv
->bt_enable_pspoll
)
1333 basic
.flags
|= IWLAGN_BT_FLAG_SYNC_2_BT_DISABLE
;
1335 basic
.flags
&= ~IWLAGN_BT_FLAG_SYNC_2_BT_DISABLE
;
1337 if (priv
->bt_ch_announce
)
1338 basic
.flags
|= IWLAGN_BT_FLAG_CHANNEL_INHIBITION
;
1339 IWL_DEBUG_COEX(priv
, "BT coex flag: 0X%x\n", basic
.flags
);
1341 priv
->bt_enable_flag
= basic
.flags
;
1342 if (priv
->bt_full_concurrent
)
1343 memcpy(basic
.bt3_lookup_table
, iwlagn_concurrent_lookup
,
1344 sizeof(iwlagn_concurrent_lookup
));
1346 memcpy(basic
.bt3_lookup_table
, iwlagn_def_3w_lookup
,
1347 sizeof(iwlagn_def_3w_lookup
));
1349 IWL_DEBUG_COEX(priv
, "BT coex %s in %s mode\n",
1350 basic
.flags
? "active" : "disabled",
1351 priv
->bt_full_concurrent
?
1352 "full concurrency" : "3-wire");
1354 if (priv
->cfg
->bt_params
->bt_session_2
) {
1355 memcpy(&bt_cmd_2000
.basic
, &basic
,
1357 ret
= trans_send_cmd_pdu(&priv
->trans
, REPLY_BT_CONFIG
,
1358 CMD_SYNC
, sizeof(bt_cmd_2000
), &bt_cmd_2000
);
1360 memcpy(&bt_cmd_6000
.basic
, &basic
,
1362 ret
= trans_send_cmd_pdu(&priv
->trans
, REPLY_BT_CONFIG
,
1363 CMD_SYNC
, sizeof(bt_cmd_6000
), &bt_cmd_6000
);
1366 IWL_ERR(priv
, "failed to send BT Coex Config\n");
1370 void iwlagn_bt_adjust_rssi_monitor(struct iwl_priv
*priv
, bool rssi_ena
)
1372 struct iwl_rxon_context
*ctx
, *found_ctx
= NULL
;
1373 bool found_ap
= false;
1375 lockdep_assert_held(&priv
->shrd
->mutex
);
1377 /* Check whether AP or GO mode is active. */
1379 for_each_context(priv
, ctx
) {
1380 if (ctx
->vif
&& ctx
->vif
->type
== NL80211_IFTYPE_AP
&&
1381 iwl_is_associated_ctx(ctx
)) {
1389 * If disable was received or If GO/AP mode, disable RSSI
1392 if (!rssi_ena
|| found_ap
) {
1393 if (priv
->cur_rssi_ctx
) {
1394 ctx
= priv
->cur_rssi_ctx
;
1395 ieee80211_disable_rssi_reports(ctx
->vif
);
1396 priv
->cur_rssi_ctx
= NULL
;
1402 * If rssi measurements need to be enabled, consider all cases now.
1403 * Figure out how many contexts are active.
1405 for_each_context(priv
, ctx
) {
1406 if (ctx
->vif
&& ctx
->vif
->type
== NL80211_IFTYPE_STATION
&&
1407 iwl_is_associated_ctx(ctx
)) {
1414 * rssi monitor already enabled for the correct interface...nothing
1417 if (found_ctx
== priv
->cur_rssi_ctx
)
1421 * Figure out if rssi monitor is currently enabled, and needs
1422 * to be changed. If rssi monitor is already enabled, disable
1423 * it first else just enable rssi measurements on the
1424 * interface found above.
1426 if (priv
->cur_rssi_ctx
) {
1427 ctx
= priv
->cur_rssi_ctx
;
1429 ieee80211_disable_rssi_reports(ctx
->vif
);
1432 priv
->cur_rssi_ctx
= found_ctx
;
1437 ieee80211_enable_rssi_reports(found_ctx
->vif
,
1438 IWLAGN_BT_PSP_MIN_RSSI_THRESHOLD
,
1439 IWLAGN_BT_PSP_MAX_RSSI_THRESHOLD
);
1442 static bool iwlagn_bt_traffic_is_sco(struct iwl_bt_uart_msg
*uart_msg
)
1444 return BT_UART_MSG_FRAME3SCOESCO_MSK
& uart_msg
->frame3
>>
1445 BT_UART_MSG_FRAME3SCOESCO_POS
;
1448 static void iwlagn_bt_traffic_change_work(struct work_struct
*work
)
1450 struct iwl_priv
*priv
=
1451 container_of(work
, struct iwl_priv
, bt_traffic_change_work
);
1452 struct iwl_rxon_context
*ctx
;
1453 int smps_request
= -1;
1455 if (priv
->bt_enable_flag
== IWLAGN_BT_FLAG_COEX_MODE_DISABLED
) {
1456 /* bt coex disabled */
1461 * Note: bt_traffic_load can be overridden by scan complete and
1462 * coex profile notifications. Ignore that since only bad consequence
1463 * can be not matching debug print with actual state.
1465 IWL_DEBUG_COEX(priv
, "BT traffic load changes: %d\n",
1466 priv
->bt_traffic_load
);
1468 switch (priv
->bt_traffic_load
) {
1469 case IWL_BT_COEX_TRAFFIC_LOAD_NONE
:
1470 if (priv
->bt_status
)
1471 smps_request
= IEEE80211_SMPS_DYNAMIC
;
1473 smps_request
= IEEE80211_SMPS_AUTOMATIC
;
1475 case IWL_BT_COEX_TRAFFIC_LOAD_LOW
:
1476 smps_request
= IEEE80211_SMPS_DYNAMIC
;
1478 case IWL_BT_COEX_TRAFFIC_LOAD_HIGH
:
1479 case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS
:
1480 smps_request
= IEEE80211_SMPS_STATIC
;
1483 IWL_ERR(priv
, "Invalid BT traffic load: %d\n",
1484 priv
->bt_traffic_load
);
1488 mutex_lock(&priv
->shrd
->mutex
);
1491 * We can not send command to firmware while scanning. When the scan
1492 * complete we will schedule this work again. We do check with mutex
1493 * locked to prevent new scan request to arrive. We do not check
1494 * STATUS_SCANNING to avoid race when queue_work two times from
1495 * different notifications, but quit and not perform any work at all.
1497 if (test_bit(STATUS_SCAN_HW
, &priv
->shrd
->status
))
1500 iwl_update_chain_flags(priv
);
1502 if (smps_request
!= -1) {
1503 priv
->current_ht_config
.smps
= smps_request
;
1504 for_each_context(priv
, ctx
) {
1505 if (ctx
->vif
&& ctx
->vif
->type
== NL80211_IFTYPE_STATION
)
1506 ieee80211_request_smps(ctx
->vif
, smps_request
);
1511 * Dynamic PS poll related functionality. Adjust RSSI measurements if
1514 iwlagn_bt_coex_rssi_monitor(priv
);
1516 mutex_unlock(&priv
->shrd
->mutex
);
1520 * If BT sco traffic, and RSSI monitor is enabled, move measurements to the
1521 * correct interface or disable it if this is the last interface to be
1524 void iwlagn_bt_coex_rssi_monitor(struct iwl_priv
*priv
)
1526 if (priv
->bt_is_sco
&&
1527 priv
->bt_traffic_load
== IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS
)
1528 iwlagn_bt_adjust_rssi_monitor(priv
, true);
1530 iwlagn_bt_adjust_rssi_monitor(priv
, false);
1533 static void iwlagn_print_uartmsg(struct iwl_priv
*priv
,
1534 struct iwl_bt_uart_msg
*uart_msg
)
1536 IWL_DEBUG_COEX(priv
, "Message Type = 0x%X, SSN = 0x%X, "
1537 "Update Req = 0x%X",
1538 (BT_UART_MSG_FRAME1MSGTYPE_MSK
& uart_msg
->frame1
) >>
1539 BT_UART_MSG_FRAME1MSGTYPE_POS
,
1540 (BT_UART_MSG_FRAME1SSN_MSK
& uart_msg
->frame1
) >>
1541 BT_UART_MSG_FRAME1SSN_POS
,
1542 (BT_UART_MSG_FRAME1UPDATEREQ_MSK
& uart_msg
->frame1
) >>
1543 BT_UART_MSG_FRAME1UPDATEREQ_POS
);
1545 IWL_DEBUG_COEX(priv
, "Open connections = 0x%X, Traffic load = 0x%X, "
1546 "Chl_SeqN = 0x%X, In band = 0x%X",
1547 (BT_UART_MSG_FRAME2OPENCONNECTIONS_MSK
& uart_msg
->frame2
) >>
1548 BT_UART_MSG_FRAME2OPENCONNECTIONS_POS
,
1549 (BT_UART_MSG_FRAME2TRAFFICLOAD_MSK
& uart_msg
->frame2
) >>
1550 BT_UART_MSG_FRAME2TRAFFICLOAD_POS
,
1551 (BT_UART_MSG_FRAME2CHLSEQN_MSK
& uart_msg
->frame2
) >>
1552 BT_UART_MSG_FRAME2CHLSEQN_POS
,
1553 (BT_UART_MSG_FRAME2INBAND_MSK
& uart_msg
->frame2
) >>
1554 BT_UART_MSG_FRAME2INBAND_POS
);
1556 IWL_DEBUG_COEX(priv
, "SCO/eSCO = 0x%X, Sniff = 0x%X, A2DP = 0x%X, "
1557 "ACL = 0x%X, Master = 0x%X, OBEX = 0x%X",
1558 (BT_UART_MSG_FRAME3SCOESCO_MSK
& uart_msg
->frame3
) >>
1559 BT_UART_MSG_FRAME3SCOESCO_POS
,
1560 (BT_UART_MSG_FRAME3SNIFF_MSK
& uart_msg
->frame3
) >>
1561 BT_UART_MSG_FRAME3SNIFF_POS
,
1562 (BT_UART_MSG_FRAME3A2DP_MSK
& uart_msg
->frame3
) >>
1563 BT_UART_MSG_FRAME3A2DP_POS
,
1564 (BT_UART_MSG_FRAME3ACL_MSK
& uart_msg
->frame3
) >>
1565 BT_UART_MSG_FRAME3ACL_POS
,
1566 (BT_UART_MSG_FRAME3MASTER_MSK
& uart_msg
->frame3
) >>
1567 BT_UART_MSG_FRAME3MASTER_POS
,
1568 (BT_UART_MSG_FRAME3OBEX_MSK
& uart_msg
->frame3
) >>
1569 BT_UART_MSG_FRAME3OBEX_POS
);
1571 IWL_DEBUG_COEX(priv
, "Idle duration = 0x%X",
1572 (BT_UART_MSG_FRAME4IDLEDURATION_MSK
& uart_msg
->frame4
) >>
1573 BT_UART_MSG_FRAME4IDLEDURATION_POS
);
1575 IWL_DEBUG_COEX(priv
, "Tx Activity = 0x%X, Rx Activity = 0x%X, "
1576 "eSCO Retransmissions = 0x%X",
1577 (BT_UART_MSG_FRAME5TXACTIVITY_MSK
& uart_msg
->frame5
) >>
1578 BT_UART_MSG_FRAME5TXACTIVITY_POS
,
1579 (BT_UART_MSG_FRAME5RXACTIVITY_MSK
& uart_msg
->frame5
) >>
1580 BT_UART_MSG_FRAME5RXACTIVITY_POS
,
1581 (BT_UART_MSG_FRAME5ESCORETRANSMIT_MSK
& uart_msg
->frame5
) >>
1582 BT_UART_MSG_FRAME5ESCORETRANSMIT_POS
);
1584 IWL_DEBUG_COEX(priv
, "Sniff Interval = 0x%X, Discoverable = 0x%X",
1585 (BT_UART_MSG_FRAME6SNIFFINTERVAL_MSK
& uart_msg
->frame6
) >>
1586 BT_UART_MSG_FRAME6SNIFFINTERVAL_POS
,
1587 (BT_UART_MSG_FRAME6DISCOVERABLE_MSK
& uart_msg
->frame6
) >>
1588 BT_UART_MSG_FRAME6DISCOVERABLE_POS
);
1590 IWL_DEBUG_COEX(priv
, "Sniff Activity = 0x%X, Page = "
1591 "0x%X, Inquiry = 0x%X, Connectable = 0x%X",
1592 (BT_UART_MSG_FRAME7SNIFFACTIVITY_MSK
& uart_msg
->frame7
) >>
1593 BT_UART_MSG_FRAME7SNIFFACTIVITY_POS
,
1594 (BT_UART_MSG_FRAME7PAGE_MSK
& uart_msg
->frame7
) >>
1595 BT_UART_MSG_FRAME7PAGE_POS
,
1596 (BT_UART_MSG_FRAME7INQUIRY_MSK
& uart_msg
->frame7
) >>
1597 BT_UART_MSG_FRAME7INQUIRY_POS
,
1598 (BT_UART_MSG_FRAME7CONNECTABLE_MSK
& uart_msg
->frame7
) >>
1599 BT_UART_MSG_FRAME7CONNECTABLE_POS
);
1602 static void iwlagn_set_kill_msk(struct iwl_priv
*priv
,
1603 struct iwl_bt_uart_msg
*uart_msg
)
1606 static const __le32 bt_kill_ack_msg
[2] = {
1607 IWLAGN_BT_KILL_ACK_MASK_DEFAULT
,
1608 IWLAGN_BT_KILL_ACK_CTS_MASK_SCO
};
1609 static const __le32 bt_kill_cts_msg
[2] = {
1610 IWLAGN_BT_KILL_CTS_MASK_DEFAULT
,
1611 IWLAGN_BT_KILL_ACK_CTS_MASK_SCO
};
1613 kill_msk
= (BT_UART_MSG_FRAME3SCOESCO_MSK
& uart_msg
->frame3
)
1615 if (priv
->kill_ack_mask
!= bt_kill_ack_msg
[kill_msk
] ||
1616 priv
->kill_cts_mask
!= bt_kill_cts_msg
[kill_msk
]) {
1617 priv
->bt_valid
|= IWLAGN_BT_VALID_KILL_ACK_MASK
;
1618 priv
->kill_ack_mask
= bt_kill_ack_msg
[kill_msk
];
1619 priv
->bt_valid
|= IWLAGN_BT_VALID_KILL_CTS_MASK
;
1620 priv
->kill_cts_mask
= bt_kill_cts_msg
[kill_msk
];
1622 /* schedule to send runtime bt_config */
1623 queue_work(priv
->shrd
->workqueue
, &priv
->bt_runtime_config
);
1627 void iwlagn_bt_coex_profile_notif(struct iwl_priv
*priv
,
1628 struct iwl_rx_mem_buffer
*rxb
)
1630 unsigned long flags
;
1631 struct iwl_rx_packet
*pkt
= rxb_addr(rxb
);
1632 struct iwl_bt_coex_profile_notif
*coex
= &pkt
->u
.bt_coex_profile_notif
;
1633 struct iwl_bt_uart_msg
*uart_msg
= &coex
->last_bt_uart_msg
;
1635 if (priv
->bt_enable_flag
== IWLAGN_BT_FLAG_COEX_MODE_DISABLED
) {
1636 /* bt coex disabled */
1640 IWL_DEBUG_COEX(priv
, "BT Coex notification:\n");
1641 IWL_DEBUG_COEX(priv
, " status: %d\n", coex
->bt_status
);
1642 IWL_DEBUG_COEX(priv
, " traffic load: %d\n", coex
->bt_traffic_load
);
1643 IWL_DEBUG_COEX(priv
, " CI compliance: %d\n",
1644 coex
->bt_ci_compliance
);
1645 iwlagn_print_uartmsg(priv
, uart_msg
);
1647 priv
->last_bt_traffic_load
= priv
->bt_traffic_load
;
1648 priv
->bt_is_sco
= iwlagn_bt_traffic_is_sco(uart_msg
);
1650 if (priv
->iw_mode
!= NL80211_IFTYPE_ADHOC
) {
1651 if (priv
->bt_status
!= coex
->bt_status
||
1652 priv
->last_bt_traffic_load
!= coex
->bt_traffic_load
) {
1653 if (coex
->bt_status
) {
1655 if (!priv
->bt_ch_announce
)
1656 priv
->bt_traffic_load
=
1657 IWL_BT_COEX_TRAFFIC_LOAD_HIGH
;
1659 priv
->bt_traffic_load
=
1660 coex
->bt_traffic_load
;
1663 priv
->bt_traffic_load
=
1664 IWL_BT_COEX_TRAFFIC_LOAD_NONE
;
1666 priv
->bt_status
= coex
->bt_status
;
1667 queue_work(priv
->shrd
->workqueue
,
1668 &priv
->bt_traffic_change_work
);
1672 iwlagn_set_kill_msk(priv
, uart_msg
);
1674 /* FIXME: based on notification, adjust the prio_boost */
1676 spin_lock_irqsave(&priv
->shrd
->lock
, flags
);
1677 priv
->bt_ci_compliance
= coex
->bt_ci_compliance
;
1678 spin_unlock_irqrestore(&priv
->shrd
->lock
, flags
);
1681 void iwlagn_bt_rx_handler_setup(struct iwl_priv
*priv
)
1683 priv
->rx_handlers
[REPLY_BT_COEX_PROFILE_NOTIF
] =
1684 iwlagn_bt_coex_profile_notif
;
1687 void iwlagn_bt_setup_deferred_work(struct iwl_priv
*priv
)
1689 INIT_WORK(&priv
->bt_traffic_change_work
,
1690 iwlagn_bt_traffic_change_work
);
1693 void iwlagn_bt_cancel_deferred_work(struct iwl_priv
*priv
)
1695 cancel_work_sync(&priv
->bt_traffic_change_work
);
1698 static bool is_single_rx_stream(struct iwl_priv
*priv
)
1700 return priv
->current_ht_config
.smps
== IEEE80211_SMPS_STATIC
||
1701 priv
->current_ht_config
.single_chain_sufficient
;
1704 #define IWL_NUM_RX_CHAINS_MULTIPLE 3
1705 #define IWL_NUM_RX_CHAINS_SINGLE 2
1706 #define IWL_NUM_IDLE_CHAINS_DUAL 2
1707 #define IWL_NUM_IDLE_CHAINS_SINGLE 1
1710 * Determine how many receiver/antenna chains to use.
1712 * More provides better reception via diversity. Fewer saves power
1713 * at the expense of throughput, but only when not in powersave to
1716 * MIMO (dual stream) requires at least 2, but works better with 3.
1717 * This does not determine *which* chains to use, just how many.
1719 static int iwl_get_active_rx_chain_count(struct iwl_priv
*priv
)
1721 if (priv
->cfg
->bt_params
&&
1722 priv
->cfg
->bt_params
->advanced_bt_coexist
&&
1723 (priv
->bt_full_concurrent
||
1724 priv
->bt_traffic_load
>= IWL_BT_COEX_TRAFFIC_LOAD_HIGH
)) {
1726 * only use chain 'A' in bt high traffic load or
1727 * full concurrency mode
1729 return IWL_NUM_RX_CHAINS_SINGLE
;
1731 /* # of Rx chains to use when expecting MIMO. */
1732 if (is_single_rx_stream(priv
))
1733 return IWL_NUM_RX_CHAINS_SINGLE
;
1735 return IWL_NUM_RX_CHAINS_MULTIPLE
;
1739 * When we are in power saving mode, unless device support spatial
1740 * multiplexing power save, use the active count for rx chain count.
1742 static int iwl_get_idle_rx_chain_count(struct iwl_priv
*priv
, int active_cnt
)
1744 /* # Rx chains when idling, depending on SMPS mode */
1745 switch (priv
->current_ht_config
.smps
) {
1746 case IEEE80211_SMPS_STATIC
:
1747 case IEEE80211_SMPS_DYNAMIC
:
1748 return IWL_NUM_IDLE_CHAINS_SINGLE
;
1749 case IEEE80211_SMPS_OFF
:
1752 WARN(1, "invalid SMPS mode %d",
1753 priv
->current_ht_config
.smps
);
1758 /* up to 4 chains */
1759 static u8
iwl_count_chain_bitmap(u32 chain_bitmap
)
1762 res
= (chain_bitmap
& BIT(0)) >> 0;
1763 res
+= (chain_bitmap
& BIT(1)) >> 1;
1764 res
+= (chain_bitmap
& BIT(2)) >> 2;
1765 res
+= (chain_bitmap
& BIT(3)) >> 3;
1770 * iwlagn_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
1772 * Selects how many and which Rx receivers/antennas/chains to use.
1773 * This should not be used for scan command ... it puts data in wrong place.
1775 void iwlagn_set_rxon_chain(struct iwl_priv
*priv
, struct iwl_rxon_context
*ctx
)
1777 bool is_single
= is_single_rx_stream(priv
);
1778 bool is_cam
= !test_bit(STATUS_POWER_PMI
, &priv
->shrd
->status
);
1779 u8 idle_rx_cnt
, active_rx_cnt
, valid_rx_cnt
;
1783 /* Tell uCode which antennas are actually connected.
1784 * Before first association, we assume all antennas are connected.
1785 * Just after first association, iwl_chain_noise_calibration()
1786 * checks which antennas actually *are* connected. */
1787 if (priv
->chain_noise_data
.active_chains
)
1788 active_chains
= priv
->chain_noise_data
.active_chains
;
1790 active_chains
= hw_params(priv
).valid_rx_ant
;
1792 if (priv
->cfg
->bt_params
&&
1793 priv
->cfg
->bt_params
->advanced_bt_coexist
&&
1794 (priv
->bt_full_concurrent
||
1795 priv
->bt_traffic_load
>= IWL_BT_COEX_TRAFFIC_LOAD_HIGH
)) {
1797 * only use chain 'A' in bt high traffic load or
1798 * full concurrency mode
1800 active_chains
= first_antenna(active_chains
);
1803 rx_chain
= active_chains
<< RXON_RX_CHAIN_VALID_POS
;
1805 /* How many receivers should we use? */
1806 active_rx_cnt
= iwl_get_active_rx_chain_count(priv
);
1807 idle_rx_cnt
= iwl_get_idle_rx_chain_count(priv
, active_rx_cnt
);
1810 /* correct rx chain count according hw settings
1811 * and chain noise calibration
1813 valid_rx_cnt
= iwl_count_chain_bitmap(active_chains
);
1814 if (valid_rx_cnt
< active_rx_cnt
)
1815 active_rx_cnt
= valid_rx_cnt
;
1817 if (valid_rx_cnt
< idle_rx_cnt
)
1818 idle_rx_cnt
= valid_rx_cnt
;
1820 rx_chain
|= active_rx_cnt
<< RXON_RX_CHAIN_MIMO_CNT_POS
;
1821 rx_chain
|= idle_rx_cnt
<< RXON_RX_CHAIN_CNT_POS
;
1823 ctx
->staging
.rx_chain
= cpu_to_le16(rx_chain
);
1825 if (!is_single
&& (active_rx_cnt
>= IWL_NUM_RX_CHAINS_SINGLE
) && is_cam
)
1826 ctx
->staging
.rx_chain
|= RXON_RX_CHAIN_MIMO_FORCE_MSK
;
1828 ctx
->staging
.rx_chain
&= ~RXON_RX_CHAIN_MIMO_FORCE_MSK
;
1830 IWL_DEBUG_ASSOC(priv
, "rx_chain=0x%X active=%d idle=%d\n",
1831 ctx
->staging
.rx_chain
,
1832 active_rx_cnt
, idle_rx_cnt
);
1834 WARN_ON(active_rx_cnt
== 0 || idle_rx_cnt
== 0 ||
1835 active_rx_cnt
< idle_rx_cnt
);
1838 u8
iwl_toggle_tx_ant(struct iwl_priv
*priv
, u8 ant
, u8 valid
)
1843 if (priv
->band
== IEEE80211_BAND_2GHZ
&&
1844 priv
->bt_traffic_load
>= IWL_BT_COEX_TRAFFIC_LOAD_HIGH
)
1847 for (i
= 0; i
< RATE_ANT_NUM
- 1; i
++) {
1848 ind
= (ind
+ 1) < RATE_ANT_NUM
? ind
+ 1 : 0;
1849 if (valid
& BIT(ind
))
1855 static const char *get_csr_string(int cmd
)
1858 IWL_CMD(CSR_HW_IF_CONFIG_REG
);
1859 IWL_CMD(CSR_INT_COALESCING
);
1861 IWL_CMD(CSR_INT_MASK
);
1862 IWL_CMD(CSR_FH_INT_STATUS
);
1863 IWL_CMD(CSR_GPIO_IN
);
1865 IWL_CMD(CSR_GP_CNTRL
);
1866 IWL_CMD(CSR_HW_REV
);
1867 IWL_CMD(CSR_EEPROM_REG
);
1868 IWL_CMD(CSR_EEPROM_GP
);
1869 IWL_CMD(CSR_OTP_GP_REG
);
1870 IWL_CMD(CSR_GIO_REG
);
1871 IWL_CMD(CSR_GP_UCODE_REG
);
1872 IWL_CMD(CSR_GP_DRIVER_REG
);
1873 IWL_CMD(CSR_UCODE_DRV_GP1
);
1874 IWL_CMD(CSR_UCODE_DRV_GP2
);
1875 IWL_CMD(CSR_LED_REG
);
1876 IWL_CMD(CSR_DRAM_INT_TBL_REG
);
1877 IWL_CMD(CSR_GIO_CHICKEN_BITS
);
1878 IWL_CMD(CSR_ANA_PLL_CFG
);
1879 IWL_CMD(CSR_HW_REV_WA_REG
);
1880 IWL_CMD(CSR_DBG_HPET_MEM_REG
);
1886 void iwl_dump_csr(struct iwl_priv
*priv
)
1889 static const u32 csr_tbl
[] = {
1890 CSR_HW_IF_CONFIG_REG
,
1908 CSR_DRAM_INT_TBL_REG
,
1909 CSR_GIO_CHICKEN_BITS
,
1912 CSR_DBG_HPET_MEM_REG
1914 IWL_ERR(priv
, "CSR values:\n");
1915 IWL_ERR(priv
, "(2nd byte of CSR_INT_COALESCING is "
1916 "CSR_INT_PERIODIC_REG)\n");
1917 for (i
= 0; i
< ARRAY_SIZE(csr_tbl
); i
++) {
1918 IWL_ERR(priv
, " %25s: 0X%08x\n",
1919 get_csr_string(csr_tbl
[i
]),
1920 iwl_read32(priv
, csr_tbl
[i
]));
1924 static const char *get_fh_string(int cmd
)
1927 IWL_CMD(FH_RSCSR_CHNL0_STTS_WPTR_REG
);
1928 IWL_CMD(FH_RSCSR_CHNL0_RBDCB_BASE_REG
);
1929 IWL_CMD(FH_RSCSR_CHNL0_WPTR
);
1930 IWL_CMD(FH_MEM_RCSR_CHNL0_CONFIG_REG
);
1931 IWL_CMD(FH_MEM_RSSR_SHARED_CTRL_REG
);
1932 IWL_CMD(FH_MEM_RSSR_RX_STATUS_REG
);
1933 IWL_CMD(FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV
);
1934 IWL_CMD(FH_TSSR_TX_STATUS_REG
);
1935 IWL_CMD(FH_TSSR_TX_ERROR_REG
);
1941 int iwl_dump_fh(struct iwl_priv
*priv
, char **buf
, bool display
)
1944 #ifdef CONFIG_IWLWIFI_DEBUG
1948 static const u32 fh_tbl
[] = {
1949 FH_RSCSR_CHNL0_STTS_WPTR_REG
,
1950 FH_RSCSR_CHNL0_RBDCB_BASE_REG
,
1951 FH_RSCSR_CHNL0_WPTR
,
1952 FH_MEM_RCSR_CHNL0_CONFIG_REG
,
1953 FH_MEM_RSSR_SHARED_CTRL_REG
,
1954 FH_MEM_RSSR_RX_STATUS_REG
,
1955 FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV
,
1956 FH_TSSR_TX_STATUS_REG
,
1957 FH_TSSR_TX_ERROR_REG
1959 #ifdef CONFIG_IWLWIFI_DEBUG
1961 bufsz
= ARRAY_SIZE(fh_tbl
) * 48 + 40;
1962 *buf
= kmalloc(bufsz
, GFP_KERNEL
);
1965 pos
+= scnprintf(*buf
+ pos
, bufsz
- pos
,
1966 "FH register values:\n");
1967 for (i
= 0; i
< ARRAY_SIZE(fh_tbl
); i
++) {
1968 pos
+= scnprintf(*buf
+ pos
, bufsz
- pos
,
1970 get_fh_string(fh_tbl
[i
]),
1971 iwl_read_direct32(priv
, fh_tbl
[i
]));
1976 IWL_ERR(priv
, "FH register values:\n");
1977 for (i
= 0; i
< ARRAY_SIZE(fh_tbl
); i
++) {
1978 IWL_ERR(priv
, " %34s: 0X%08x\n",
1979 get_fh_string(fh_tbl
[i
]),
1980 iwl_read_direct32(priv
, fh_tbl
[i
]));
1985 /* notification wait support */
1986 void iwlagn_init_notification_wait(struct iwl_priv
*priv
,
1987 struct iwl_notification_wait
*wait_entry
,
1989 void (*fn
)(struct iwl_priv
*priv
,
1990 struct iwl_rx_packet
*pkt
,
1994 wait_entry
->fn
= fn
;
1995 wait_entry
->fn_data
= fn_data
;
1996 wait_entry
->cmd
= cmd
;
1997 wait_entry
->triggered
= false;
1998 wait_entry
->aborted
= false;
2000 spin_lock_bh(&priv
->notif_wait_lock
);
2001 list_add(&wait_entry
->list
, &priv
->notif_waits
);
2002 spin_unlock_bh(&priv
->notif_wait_lock
);
2005 int iwlagn_wait_notification(struct iwl_priv
*priv
,
2006 struct iwl_notification_wait
*wait_entry
,
2007 unsigned long timeout
)
2011 ret
= wait_event_timeout(priv
->notif_waitq
,
2012 wait_entry
->triggered
|| wait_entry
->aborted
,
2015 spin_lock_bh(&priv
->notif_wait_lock
);
2016 list_del(&wait_entry
->list
);
2017 spin_unlock_bh(&priv
->notif_wait_lock
);
2019 if (wait_entry
->aborted
)
2022 /* return value is always >= 0 */
2028 void iwlagn_remove_notification(struct iwl_priv
*priv
,
2029 struct iwl_notification_wait
*wait_entry
)
2031 spin_lock_bh(&priv
->notif_wait_lock
);
2032 list_del(&wait_entry
->list
);
2033 spin_unlock_bh(&priv
->notif_wait_lock
);