iwlagn: move rx transport functions to iwl-trans-rx-pcie.c
[deliverable/linux.git] / drivers / net / wireless / iwlwifi / iwl-agn.c
1 /******************************************************************************
2 *
3 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
4 *
5 * Portions of this file are derived from the ipw3945 project, as well
6 * as portions of the ieee80211 subsystem header files.
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of version 2 of the GNU General Public License as
10 * published by the Free Software Foundation.
11 *
12 * This program is distributed in the hope that it will be useful, but WITHOUT
13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 * more details.
16 *
17 * You should have received a copy of the GNU General Public License along with
18 * this program; if not, write to the Free Software Foundation, Inc.,
19 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
20 *
21 * The full GNU General Public License is included in this distribution in the
22 * file called LICENSE.
23 *
24 * Contact Information:
25 * Intel Linux Wireless <ilw@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27 *
28 *****************************************************************************/
29
30 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
31
32 #include <linux/kernel.h>
33 #include <linux/module.h>
34 #include <linux/init.h>
35 #include <linux/slab.h>
36 #include <linux/dma-mapping.h>
37 #include <linux/delay.h>
38 #include <linux/sched.h>
39 #include <linux/skbuff.h>
40 #include <linux/netdevice.h>
41 #include <linux/wireless.h>
42 #include <linux/firmware.h>
43 #include <linux/etherdevice.h>
44 #include <linux/if_arp.h>
45
46 #include <net/mac80211.h>
47
48 #include <asm/div64.h>
49
50 #include "iwl-eeprom.h"
51 #include "iwl-dev.h"
52 #include "iwl-core.h"
53 #include "iwl-io.h"
54 #include "iwl-helpers.h"
55 #include "iwl-sta.h"
56 #include "iwl-agn-calib.h"
57 #include "iwl-agn.h"
58 #include "iwl-pci.h"
59 #include "iwl-trans.h"
60
61 /******************************************************************************
62 *
63 * module boiler plate
64 *
65 ******************************************************************************/
66
67 /*
68 * module name, copyright, version, etc.
69 */
70 #define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link AGN driver for Linux"
71
72 #ifdef CONFIG_IWLWIFI_DEBUG
73 #define VD "d"
74 #else
75 #define VD
76 #endif
77
78 #define DRV_VERSION IWLWIFI_VERSION VD
79
80
81 MODULE_DESCRIPTION(DRV_DESCRIPTION);
82 MODULE_VERSION(DRV_VERSION);
83 MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
84 MODULE_LICENSE("GPL");
85
86 static int iwlagn_ant_coupling;
87 static bool iwlagn_bt_ch_announce = 1;
88
89 void iwl_update_chain_flags(struct iwl_priv *priv)
90 {
91 struct iwl_rxon_context *ctx;
92
93 for_each_context(priv, ctx) {
94 iwlagn_set_rxon_chain(priv, ctx);
95 if (ctx->active.rx_chain != ctx->staging.rx_chain)
96 iwlagn_commit_rxon(priv, ctx);
97 }
98 }
99
100 /* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
101 static void iwl_set_beacon_tim(struct iwl_priv *priv,
102 struct iwl_tx_beacon_cmd *tx_beacon_cmd,
103 u8 *beacon, u32 frame_size)
104 {
105 u16 tim_idx;
106 struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon;
107
108 /*
109 * The index is relative to frame start but we start looking at the
110 * variable-length part of the beacon.
111 */
112 tim_idx = mgmt->u.beacon.variable - beacon;
113
114 /* Parse variable-length elements of beacon to find WLAN_EID_TIM */
115 while ((tim_idx < (frame_size - 2)) &&
116 (beacon[tim_idx] != WLAN_EID_TIM))
117 tim_idx += beacon[tim_idx+1] + 2;
118
119 /* If TIM field was found, set variables */
120 if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) {
121 tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx);
122 tx_beacon_cmd->tim_size = beacon[tim_idx+1];
123 } else
124 IWL_WARN(priv, "Unable to find TIM Element in beacon\n");
125 }
126
127 int iwlagn_send_beacon_cmd(struct iwl_priv *priv)
128 {
129 struct iwl_tx_beacon_cmd *tx_beacon_cmd;
130 struct iwl_host_cmd cmd = {
131 .id = REPLY_TX_BEACON,
132 .flags = CMD_SYNC,
133 };
134 struct ieee80211_tx_info *info;
135 u32 frame_size;
136 u32 rate_flags;
137 u32 rate;
138
139 /*
140 * We have to set up the TX command, the TX Beacon command, and the
141 * beacon contents.
142 */
143
144 lockdep_assert_held(&priv->mutex);
145
146 if (!priv->beacon_ctx) {
147 IWL_ERR(priv, "trying to build beacon w/o beacon context!\n");
148 return 0;
149 }
150
151 if (WARN_ON(!priv->beacon_skb))
152 return -EINVAL;
153
154 /* Allocate beacon command */
155 if (!priv->beacon_cmd)
156 priv->beacon_cmd = kzalloc(sizeof(*tx_beacon_cmd), GFP_KERNEL);
157 tx_beacon_cmd = priv->beacon_cmd;
158 if (!tx_beacon_cmd)
159 return -ENOMEM;
160
161 frame_size = priv->beacon_skb->len;
162
163 /* Set up TX command fields */
164 tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
165 tx_beacon_cmd->tx.sta_id = priv->beacon_ctx->bcast_sta_id;
166 tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
167 tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK |
168 TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK;
169
170 /* Set up TX beacon command fields */
171 iwl_set_beacon_tim(priv, tx_beacon_cmd, priv->beacon_skb->data,
172 frame_size);
173
174 /* Set up packet rate and flags */
175 info = IEEE80211_SKB_CB(priv->beacon_skb);
176
177 /*
178 * Let's set up the rate at least somewhat correctly;
179 * it will currently not actually be used by the uCode,
180 * it uses the broadcast station's rate instead.
181 */
182 if (info->control.rates[0].idx < 0 ||
183 info->control.rates[0].flags & IEEE80211_TX_RC_MCS)
184 rate = 0;
185 else
186 rate = info->control.rates[0].idx;
187
188 priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant,
189 priv->hw_params.valid_tx_ant);
190 rate_flags = iwl_ant_idx_to_flags(priv->mgmt_tx_ant);
191
192 /* In mac80211, rates for 5 GHz start at 0 */
193 if (info->band == IEEE80211_BAND_5GHZ)
194 rate += IWL_FIRST_OFDM_RATE;
195 else if (rate >= IWL_FIRST_CCK_RATE && rate <= IWL_LAST_CCK_RATE)
196 rate_flags |= RATE_MCS_CCK_MSK;
197
198 tx_beacon_cmd->tx.rate_n_flags =
199 iwl_hw_set_rate_n_flags(rate, rate_flags);
200
201 /* Submit command */
202 cmd.len[0] = sizeof(*tx_beacon_cmd);
203 cmd.data[0] = tx_beacon_cmd;
204 cmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY;
205 cmd.len[1] = frame_size;
206 cmd.data[1] = priv->beacon_skb->data;
207 cmd.dataflags[1] = IWL_HCMD_DFL_NOCOPY;
208
209 return trans_send_cmd(priv, &cmd);
210 }
211
212 static void iwl_bg_beacon_update(struct work_struct *work)
213 {
214 struct iwl_priv *priv =
215 container_of(work, struct iwl_priv, beacon_update);
216 struct sk_buff *beacon;
217
218 mutex_lock(&priv->mutex);
219 if (!priv->beacon_ctx) {
220 IWL_ERR(priv, "updating beacon w/o beacon context!\n");
221 goto out;
222 }
223
224 if (priv->beacon_ctx->vif->type != NL80211_IFTYPE_AP) {
225 /*
226 * The ucode will send beacon notifications even in
227 * IBSS mode, but we don't want to process them. But
228 * we need to defer the type check to here due to
229 * requiring locking around the beacon_ctx access.
230 */
231 goto out;
232 }
233
234 /* Pull updated AP beacon from mac80211. will fail if not in AP mode */
235 beacon = ieee80211_beacon_get(priv->hw, priv->beacon_ctx->vif);
236 if (!beacon) {
237 IWL_ERR(priv, "update beacon failed -- keeping old\n");
238 goto out;
239 }
240
241 /* new beacon skb is allocated every time; dispose previous.*/
242 dev_kfree_skb(priv->beacon_skb);
243
244 priv->beacon_skb = beacon;
245
246 iwlagn_send_beacon_cmd(priv);
247 out:
248 mutex_unlock(&priv->mutex);
249 }
250
251 static void iwl_bg_bt_runtime_config(struct work_struct *work)
252 {
253 struct iwl_priv *priv =
254 container_of(work, struct iwl_priv, bt_runtime_config);
255
256 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
257 return;
258
259 /* dont send host command if rf-kill is on */
260 if (!iwl_is_ready_rf(priv))
261 return;
262 iwlagn_send_advance_bt_config(priv);
263 }
264
265 static void iwl_bg_bt_full_concurrency(struct work_struct *work)
266 {
267 struct iwl_priv *priv =
268 container_of(work, struct iwl_priv, bt_full_concurrency);
269 struct iwl_rxon_context *ctx;
270
271 mutex_lock(&priv->mutex);
272
273 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
274 goto out;
275
276 /* dont send host command if rf-kill is on */
277 if (!iwl_is_ready_rf(priv))
278 goto out;
279
280 IWL_DEBUG_INFO(priv, "BT coex in %s mode\n",
281 priv->bt_full_concurrent ?
282 "full concurrency" : "3-wire");
283
284 /*
285 * LQ & RXON updated cmds must be sent before BT Config cmd
286 * to avoid 3-wire collisions
287 */
288 for_each_context(priv, ctx) {
289 iwlagn_set_rxon_chain(priv, ctx);
290 iwlagn_commit_rxon(priv, ctx);
291 }
292
293 iwlagn_send_advance_bt_config(priv);
294 out:
295 mutex_unlock(&priv->mutex);
296 }
297
298 /**
299 * iwl_bg_statistics_periodic - Timer callback to queue statistics
300 *
301 * This callback is provided in order to send a statistics request.
302 *
303 * This timer function is continually reset to execute within
304 * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION
305 * was received. We need to ensure we receive the statistics in order
306 * to update the temperature used for calibrating the TXPOWER.
307 */
308 static void iwl_bg_statistics_periodic(unsigned long data)
309 {
310 struct iwl_priv *priv = (struct iwl_priv *)data;
311
312 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
313 return;
314
315 /* dont send host command if rf-kill is on */
316 if (!iwl_is_ready_rf(priv))
317 return;
318
319 iwl_send_statistics_request(priv, CMD_ASYNC, false);
320 }
321
322
323 static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base,
324 u32 start_idx, u32 num_events,
325 u32 mode)
326 {
327 u32 i;
328 u32 ptr; /* SRAM byte address of log data */
329 u32 ev, time, data; /* event log data */
330 unsigned long reg_flags;
331
332 if (mode == 0)
333 ptr = base + (4 * sizeof(u32)) + (start_idx * 2 * sizeof(u32));
334 else
335 ptr = base + (4 * sizeof(u32)) + (start_idx * 3 * sizeof(u32));
336
337 /* Make sure device is powered up for SRAM reads */
338 spin_lock_irqsave(&priv->reg_lock, reg_flags);
339 if (iwl_grab_nic_access(priv)) {
340 spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
341 return;
342 }
343
344 /* Set starting address; reads will auto-increment */
345 iwl_write32(priv, HBUS_TARG_MEM_RADDR, ptr);
346 rmb();
347
348 /*
349 * "time" is actually "data" for mode 0 (no timestamp).
350 * place event id # at far right for easier visual parsing.
351 */
352 for (i = 0; i < num_events; i++) {
353 ev = iwl_read32(priv, HBUS_TARG_MEM_RDAT);
354 time = iwl_read32(priv, HBUS_TARG_MEM_RDAT);
355 if (mode == 0) {
356 trace_iwlwifi_dev_ucode_cont_event(priv,
357 0, time, ev);
358 } else {
359 data = iwl_read32(priv, HBUS_TARG_MEM_RDAT);
360 trace_iwlwifi_dev_ucode_cont_event(priv,
361 time, data, ev);
362 }
363 }
364 /* Allow device to power down */
365 iwl_release_nic_access(priv);
366 spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
367 }
368
369 static void iwl_continuous_event_trace(struct iwl_priv *priv)
370 {
371 u32 capacity; /* event log capacity in # entries */
372 u32 base; /* SRAM byte address of event log header */
373 u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
374 u32 num_wraps; /* # times uCode wrapped to top of log */
375 u32 next_entry; /* index of next entry to be written by uCode */
376
377 base = priv->device_pointers.error_event_table;
378 if (iwlagn_hw_valid_rtc_data_addr(base)) {
379 capacity = iwl_read_targ_mem(priv, base);
380 num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
381 mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
382 next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
383 } else
384 return;
385
386 if (num_wraps == priv->event_log.num_wraps) {
387 iwl_print_cont_event_trace(priv,
388 base, priv->event_log.next_entry,
389 next_entry - priv->event_log.next_entry,
390 mode);
391 priv->event_log.non_wraps_count++;
392 } else {
393 if ((num_wraps - priv->event_log.num_wraps) > 1)
394 priv->event_log.wraps_more_count++;
395 else
396 priv->event_log.wraps_once_count++;
397 trace_iwlwifi_dev_ucode_wrap_event(priv,
398 num_wraps - priv->event_log.num_wraps,
399 next_entry, priv->event_log.next_entry);
400 if (next_entry < priv->event_log.next_entry) {
401 iwl_print_cont_event_trace(priv, base,
402 priv->event_log.next_entry,
403 capacity - priv->event_log.next_entry,
404 mode);
405
406 iwl_print_cont_event_trace(priv, base, 0,
407 next_entry, mode);
408 } else {
409 iwl_print_cont_event_trace(priv, base,
410 next_entry, capacity - next_entry,
411 mode);
412
413 iwl_print_cont_event_trace(priv, base, 0,
414 next_entry, mode);
415 }
416 }
417 priv->event_log.num_wraps = num_wraps;
418 priv->event_log.next_entry = next_entry;
419 }
420
421 /**
422 * iwl_bg_ucode_trace - Timer callback to log ucode event
423 *
424 * The timer is continually set to execute every
425 * UCODE_TRACE_PERIOD milliseconds after the last timer expired
426 * this function is to perform continuous uCode event logging operation
427 * if enabled
428 */
429 static void iwl_bg_ucode_trace(unsigned long data)
430 {
431 struct iwl_priv *priv = (struct iwl_priv *)data;
432
433 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
434 return;
435
436 if (priv->event_log.ucode_trace) {
437 iwl_continuous_event_trace(priv);
438 /* Reschedule the timer to occur in UCODE_TRACE_PERIOD */
439 mod_timer(&priv->ucode_trace,
440 jiffies + msecs_to_jiffies(UCODE_TRACE_PERIOD));
441 }
442 }
443
444 static void iwl_bg_tx_flush(struct work_struct *work)
445 {
446 struct iwl_priv *priv =
447 container_of(work, struct iwl_priv, tx_flush);
448
449 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
450 return;
451
452 /* do nothing if rf-kill is on */
453 if (!iwl_is_ready_rf(priv))
454 return;
455
456 IWL_DEBUG_INFO(priv, "device request: flush all tx frames\n");
457 iwlagn_dev_txfifo_flush(priv, IWL_DROP_ALL);
458 }
459
460 /*****************************************************************************
461 *
462 * sysfs attributes
463 *
464 *****************************************************************************/
465
466 #ifdef CONFIG_IWLWIFI_DEBUG
467
468 /*
469 * The following adds a new attribute to the sysfs representation
470 * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/)
471 * used for controlling the debug level.
472 *
473 * See the level definitions in iwl for details.
474 *
475 * The debug_level being managed using sysfs below is a per device debug
476 * level that is used instead of the global debug level if it (the per
477 * device debug level) is set.
478 */
479 static ssize_t show_debug_level(struct device *d,
480 struct device_attribute *attr, char *buf)
481 {
482 struct iwl_priv *priv = dev_get_drvdata(d);
483 return sprintf(buf, "0x%08X\n", iwl_get_debug_level(priv));
484 }
485 static ssize_t store_debug_level(struct device *d,
486 struct device_attribute *attr,
487 const char *buf, size_t count)
488 {
489 struct iwl_priv *priv = dev_get_drvdata(d);
490 unsigned long val;
491 int ret;
492
493 ret = strict_strtoul(buf, 0, &val);
494 if (ret)
495 IWL_ERR(priv, "%s is not in hex or decimal form.\n", buf);
496 else {
497 priv->debug_level = val;
498 if (iwl_alloc_traffic_mem(priv))
499 IWL_ERR(priv,
500 "Not enough memory to generate traffic log\n");
501 }
502 return strnlen(buf, count);
503 }
504
505 static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
506 show_debug_level, store_debug_level);
507
508
509 #endif /* CONFIG_IWLWIFI_DEBUG */
510
511
512 static ssize_t show_temperature(struct device *d,
513 struct device_attribute *attr, char *buf)
514 {
515 struct iwl_priv *priv = dev_get_drvdata(d);
516
517 if (!iwl_is_alive(priv))
518 return -EAGAIN;
519
520 return sprintf(buf, "%d\n", priv->temperature);
521 }
522
523 static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
524
525 static ssize_t show_tx_power(struct device *d,
526 struct device_attribute *attr, char *buf)
527 {
528 struct iwl_priv *priv = dev_get_drvdata(d);
529
530 if (!iwl_is_ready_rf(priv))
531 return sprintf(buf, "off\n");
532 else
533 return sprintf(buf, "%d\n", priv->tx_power_user_lmt);
534 }
535
536 static ssize_t store_tx_power(struct device *d,
537 struct device_attribute *attr,
538 const char *buf, size_t count)
539 {
540 struct iwl_priv *priv = dev_get_drvdata(d);
541 unsigned long val;
542 int ret;
543
544 ret = strict_strtoul(buf, 10, &val);
545 if (ret)
546 IWL_INFO(priv, "%s is not in decimal form.\n", buf);
547 else {
548 ret = iwl_set_tx_power(priv, val, false);
549 if (ret)
550 IWL_ERR(priv, "failed setting tx power (0x%d).\n",
551 ret);
552 else
553 ret = count;
554 }
555 return ret;
556 }
557
558 static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
559
560 static struct attribute *iwl_sysfs_entries[] = {
561 &dev_attr_temperature.attr,
562 &dev_attr_tx_power.attr,
563 #ifdef CONFIG_IWLWIFI_DEBUG
564 &dev_attr_debug_level.attr,
565 #endif
566 NULL
567 };
568
569 static struct attribute_group iwl_attribute_group = {
570 .name = NULL, /* put in device directory */
571 .attrs = iwl_sysfs_entries,
572 };
573
574 /******************************************************************************
575 *
576 * uCode download functions
577 *
578 ******************************************************************************/
579
580 static void iwl_free_fw_desc(struct iwl_priv *priv, struct fw_desc *desc)
581 {
582 if (desc->v_addr)
583 dma_free_coherent(priv->bus.dev, desc->len,
584 desc->v_addr, desc->p_addr);
585 desc->v_addr = NULL;
586 desc->len = 0;
587 }
588
589 static void iwl_free_fw_img(struct iwl_priv *priv, struct fw_img *img)
590 {
591 iwl_free_fw_desc(priv, &img->code);
592 iwl_free_fw_desc(priv, &img->data);
593 }
594
595 static void iwl_dealloc_ucode(struct iwl_priv *priv)
596 {
597 iwl_free_fw_img(priv, &priv->ucode_rt);
598 iwl_free_fw_img(priv, &priv->ucode_init);
599 }
600
601 static int iwl_alloc_fw_desc(struct iwl_priv *priv, struct fw_desc *desc,
602 const void *data, size_t len)
603 {
604 if (!len) {
605 desc->v_addr = NULL;
606 return -EINVAL;
607 }
608
609 desc->v_addr = dma_alloc_coherent(priv->bus.dev, len,
610 &desc->p_addr, GFP_KERNEL);
611 if (!desc->v_addr)
612 return -ENOMEM;
613
614 desc->len = len;
615 memcpy(desc->v_addr, data, len);
616 return 0;
617 }
618
619 struct iwlagn_ucode_capabilities {
620 u32 max_probe_length;
621 u32 standard_phy_calibration_size;
622 u32 flags;
623 };
624
625 static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context);
626 static int iwl_mac_setup_register(struct iwl_priv *priv,
627 struct iwlagn_ucode_capabilities *capa);
628
629 #define UCODE_EXPERIMENTAL_INDEX 100
630 #define UCODE_EXPERIMENTAL_TAG "exp"
631
632 static int __must_check iwl_request_firmware(struct iwl_priv *priv, bool first)
633 {
634 const char *name_pre = priv->cfg->fw_name_pre;
635 char tag[8];
636
637 if (first) {
638 #ifdef CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE
639 priv->fw_index = UCODE_EXPERIMENTAL_INDEX;
640 strcpy(tag, UCODE_EXPERIMENTAL_TAG);
641 } else if (priv->fw_index == UCODE_EXPERIMENTAL_INDEX) {
642 #endif
643 priv->fw_index = priv->cfg->ucode_api_max;
644 sprintf(tag, "%d", priv->fw_index);
645 } else {
646 priv->fw_index--;
647 sprintf(tag, "%d", priv->fw_index);
648 }
649
650 if (priv->fw_index < priv->cfg->ucode_api_min) {
651 IWL_ERR(priv, "no suitable firmware found!\n");
652 return -ENOENT;
653 }
654
655 sprintf(priv->firmware_name, "%s%s%s", name_pre, tag, ".ucode");
656
657 IWL_DEBUG_INFO(priv, "attempting to load firmware %s'%s'\n",
658 (priv->fw_index == UCODE_EXPERIMENTAL_INDEX)
659 ? "EXPERIMENTAL " : "",
660 priv->firmware_name);
661
662 return request_firmware_nowait(THIS_MODULE, 1, priv->firmware_name,
663 priv->bus.dev,
664 GFP_KERNEL, priv, iwl_ucode_callback);
665 }
666
667 struct iwlagn_firmware_pieces {
668 const void *inst, *data, *init, *init_data;
669 size_t inst_size, data_size, init_size, init_data_size;
670
671 u32 build;
672
673 u32 init_evtlog_ptr, init_evtlog_size, init_errlog_ptr;
674 u32 inst_evtlog_ptr, inst_evtlog_size, inst_errlog_ptr;
675 };
676
677 static int iwlagn_load_legacy_firmware(struct iwl_priv *priv,
678 const struct firmware *ucode_raw,
679 struct iwlagn_firmware_pieces *pieces)
680 {
681 struct iwl_ucode_header *ucode = (void *)ucode_raw->data;
682 u32 api_ver, hdr_size;
683 const u8 *src;
684
685 priv->ucode_ver = le32_to_cpu(ucode->ver);
686 api_ver = IWL_UCODE_API(priv->ucode_ver);
687
688 switch (api_ver) {
689 default:
690 hdr_size = 28;
691 if (ucode_raw->size < hdr_size) {
692 IWL_ERR(priv, "File size too small!\n");
693 return -EINVAL;
694 }
695 pieces->build = le32_to_cpu(ucode->u.v2.build);
696 pieces->inst_size = le32_to_cpu(ucode->u.v2.inst_size);
697 pieces->data_size = le32_to_cpu(ucode->u.v2.data_size);
698 pieces->init_size = le32_to_cpu(ucode->u.v2.init_size);
699 pieces->init_data_size = le32_to_cpu(ucode->u.v2.init_data_size);
700 src = ucode->u.v2.data;
701 break;
702 case 0:
703 case 1:
704 case 2:
705 hdr_size = 24;
706 if (ucode_raw->size < hdr_size) {
707 IWL_ERR(priv, "File size too small!\n");
708 return -EINVAL;
709 }
710 pieces->build = 0;
711 pieces->inst_size = le32_to_cpu(ucode->u.v1.inst_size);
712 pieces->data_size = le32_to_cpu(ucode->u.v1.data_size);
713 pieces->init_size = le32_to_cpu(ucode->u.v1.init_size);
714 pieces->init_data_size = le32_to_cpu(ucode->u.v1.init_data_size);
715 src = ucode->u.v1.data;
716 break;
717 }
718
719 /* Verify size of file vs. image size info in file's header */
720 if (ucode_raw->size != hdr_size + pieces->inst_size +
721 pieces->data_size + pieces->init_size +
722 pieces->init_data_size) {
723
724 IWL_ERR(priv,
725 "uCode file size %d does not match expected size\n",
726 (int)ucode_raw->size);
727 return -EINVAL;
728 }
729
730 pieces->inst = src;
731 src += pieces->inst_size;
732 pieces->data = src;
733 src += pieces->data_size;
734 pieces->init = src;
735 src += pieces->init_size;
736 pieces->init_data = src;
737 src += pieces->init_data_size;
738
739 return 0;
740 }
741
742 static int iwlagn_wanted_ucode_alternative = 1;
743
744 static int iwlagn_load_firmware(struct iwl_priv *priv,
745 const struct firmware *ucode_raw,
746 struct iwlagn_firmware_pieces *pieces,
747 struct iwlagn_ucode_capabilities *capa)
748 {
749 struct iwl_tlv_ucode_header *ucode = (void *)ucode_raw->data;
750 struct iwl_ucode_tlv *tlv;
751 size_t len = ucode_raw->size;
752 const u8 *data;
753 int wanted_alternative = iwlagn_wanted_ucode_alternative, tmp;
754 u64 alternatives;
755 u32 tlv_len;
756 enum iwl_ucode_tlv_type tlv_type;
757 const u8 *tlv_data;
758
759 if (len < sizeof(*ucode)) {
760 IWL_ERR(priv, "uCode has invalid length: %zd\n", len);
761 return -EINVAL;
762 }
763
764 if (ucode->magic != cpu_to_le32(IWL_TLV_UCODE_MAGIC)) {
765 IWL_ERR(priv, "invalid uCode magic: 0X%x\n",
766 le32_to_cpu(ucode->magic));
767 return -EINVAL;
768 }
769
770 /*
771 * Check which alternatives are present, and "downgrade"
772 * when the chosen alternative is not present, warning
773 * the user when that happens. Some files may not have
774 * any alternatives, so don't warn in that case.
775 */
776 alternatives = le64_to_cpu(ucode->alternatives);
777 tmp = wanted_alternative;
778 if (wanted_alternative > 63)
779 wanted_alternative = 63;
780 while (wanted_alternative && !(alternatives & BIT(wanted_alternative)))
781 wanted_alternative--;
782 if (wanted_alternative && wanted_alternative != tmp)
783 IWL_WARN(priv,
784 "uCode alternative %d not available, choosing %d\n",
785 tmp, wanted_alternative);
786
787 priv->ucode_ver = le32_to_cpu(ucode->ver);
788 pieces->build = le32_to_cpu(ucode->build);
789 data = ucode->data;
790
791 len -= sizeof(*ucode);
792
793 while (len >= sizeof(*tlv)) {
794 u16 tlv_alt;
795
796 len -= sizeof(*tlv);
797 tlv = (void *)data;
798
799 tlv_len = le32_to_cpu(tlv->length);
800 tlv_type = le16_to_cpu(tlv->type);
801 tlv_alt = le16_to_cpu(tlv->alternative);
802 tlv_data = tlv->data;
803
804 if (len < tlv_len) {
805 IWL_ERR(priv, "invalid TLV len: %zd/%u\n",
806 len, tlv_len);
807 return -EINVAL;
808 }
809 len -= ALIGN(tlv_len, 4);
810 data += sizeof(*tlv) + ALIGN(tlv_len, 4);
811
812 /*
813 * Alternative 0 is always valid.
814 *
815 * Skip alternative TLVs that are not selected.
816 */
817 if (tlv_alt != 0 && tlv_alt != wanted_alternative)
818 continue;
819
820 switch (tlv_type) {
821 case IWL_UCODE_TLV_INST:
822 pieces->inst = tlv_data;
823 pieces->inst_size = tlv_len;
824 break;
825 case IWL_UCODE_TLV_DATA:
826 pieces->data = tlv_data;
827 pieces->data_size = tlv_len;
828 break;
829 case IWL_UCODE_TLV_INIT:
830 pieces->init = tlv_data;
831 pieces->init_size = tlv_len;
832 break;
833 case IWL_UCODE_TLV_INIT_DATA:
834 pieces->init_data = tlv_data;
835 pieces->init_data_size = tlv_len;
836 break;
837 case IWL_UCODE_TLV_BOOT:
838 IWL_ERR(priv, "Found unexpected BOOT ucode\n");
839 break;
840 case IWL_UCODE_TLV_PROBE_MAX_LEN:
841 if (tlv_len != sizeof(u32))
842 goto invalid_tlv_len;
843 capa->max_probe_length =
844 le32_to_cpup((__le32 *)tlv_data);
845 break;
846 case IWL_UCODE_TLV_PAN:
847 if (tlv_len)
848 goto invalid_tlv_len;
849 capa->flags |= IWL_UCODE_TLV_FLAGS_PAN;
850 break;
851 case IWL_UCODE_TLV_FLAGS:
852 /* must be at least one u32 */
853 if (tlv_len < sizeof(u32))
854 goto invalid_tlv_len;
855 /* and a proper number of u32s */
856 if (tlv_len % sizeof(u32))
857 goto invalid_tlv_len;
858 /*
859 * This driver only reads the first u32 as
860 * right now no more features are defined,
861 * if that changes then either the driver
862 * will not work with the new firmware, or
863 * it'll not take advantage of new features.
864 */
865 capa->flags = le32_to_cpup((__le32 *)tlv_data);
866 break;
867 case IWL_UCODE_TLV_INIT_EVTLOG_PTR:
868 if (tlv_len != sizeof(u32))
869 goto invalid_tlv_len;
870 pieces->init_evtlog_ptr =
871 le32_to_cpup((__le32 *)tlv_data);
872 break;
873 case IWL_UCODE_TLV_INIT_EVTLOG_SIZE:
874 if (tlv_len != sizeof(u32))
875 goto invalid_tlv_len;
876 pieces->init_evtlog_size =
877 le32_to_cpup((__le32 *)tlv_data);
878 break;
879 case IWL_UCODE_TLV_INIT_ERRLOG_PTR:
880 if (tlv_len != sizeof(u32))
881 goto invalid_tlv_len;
882 pieces->init_errlog_ptr =
883 le32_to_cpup((__le32 *)tlv_data);
884 break;
885 case IWL_UCODE_TLV_RUNT_EVTLOG_PTR:
886 if (tlv_len != sizeof(u32))
887 goto invalid_tlv_len;
888 pieces->inst_evtlog_ptr =
889 le32_to_cpup((__le32 *)tlv_data);
890 break;
891 case IWL_UCODE_TLV_RUNT_EVTLOG_SIZE:
892 if (tlv_len != sizeof(u32))
893 goto invalid_tlv_len;
894 pieces->inst_evtlog_size =
895 le32_to_cpup((__le32 *)tlv_data);
896 break;
897 case IWL_UCODE_TLV_RUNT_ERRLOG_PTR:
898 if (tlv_len != sizeof(u32))
899 goto invalid_tlv_len;
900 pieces->inst_errlog_ptr =
901 le32_to_cpup((__le32 *)tlv_data);
902 break;
903 case IWL_UCODE_TLV_ENHANCE_SENS_TBL:
904 if (tlv_len)
905 goto invalid_tlv_len;
906 priv->enhance_sensitivity_table = true;
907 break;
908 case IWL_UCODE_TLV_PHY_CALIBRATION_SIZE:
909 if (tlv_len != sizeof(u32))
910 goto invalid_tlv_len;
911 capa->standard_phy_calibration_size =
912 le32_to_cpup((__le32 *)tlv_data);
913 break;
914 default:
915 IWL_DEBUG_INFO(priv, "unknown TLV: %d\n", tlv_type);
916 break;
917 }
918 }
919
920 if (len) {
921 IWL_ERR(priv, "invalid TLV after parsing: %zd\n", len);
922 iwl_print_hex_dump(priv, IWL_DL_FW, (u8 *)data, len);
923 return -EINVAL;
924 }
925
926 return 0;
927
928 invalid_tlv_len:
929 IWL_ERR(priv, "TLV %d has invalid size: %u\n", tlv_type, tlv_len);
930 iwl_print_hex_dump(priv, IWL_DL_FW, tlv_data, tlv_len);
931
932 return -EINVAL;
933 }
934
935 /**
936 * iwl_ucode_callback - callback when firmware was loaded
937 *
938 * If loaded successfully, copies the firmware into buffers
939 * for the card to fetch (via DMA).
940 */
941 static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
942 {
943 struct iwl_priv *priv = context;
944 struct iwl_ucode_header *ucode;
945 int err;
946 struct iwlagn_firmware_pieces pieces;
947 const unsigned int api_max = priv->cfg->ucode_api_max;
948 const unsigned int api_min = priv->cfg->ucode_api_min;
949 u32 api_ver;
950 char buildstr[25];
951 u32 build;
952 struct iwlagn_ucode_capabilities ucode_capa = {
953 .max_probe_length = 200,
954 .standard_phy_calibration_size =
955 IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE,
956 };
957
958 memset(&pieces, 0, sizeof(pieces));
959
960 if (!ucode_raw) {
961 if (priv->fw_index <= priv->cfg->ucode_api_max)
962 IWL_ERR(priv,
963 "request for firmware file '%s' failed.\n",
964 priv->firmware_name);
965 goto try_again;
966 }
967
968 IWL_DEBUG_INFO(priv, "Loaded firmware file '%s' (%zd bytes).\n",
969 priv->firmware_name, ucode_raw->size);
970
971 /* Make sure that we got at least the API version number */
972 if (ucode_raw->size < 4) {
973 IWL_ERR(priv, "File size way too small!\n");
974 goto try_again;
975 }
976
977 /* Data from ucode file: header followed by uCode images */
978 ucode = (struct iwl_ucode_header *)ucode_raw->data;
979
980 if (ucode->ver)
981 err = iwlagn_load_legacy_firmware(priv, ucode_raw, &pieces);
982 else
983 err = iwlagn_load_firmware(priv, ucode_raw, &pieces,
984 &ucode_capa);
985
986 if (err)
987 goto try_again;
988
989 api_ver = IWL_UCODE_API(priv->ucode_ver);
990 build = pieces.build;
991
992 /*
993 * api_ver should match the api version forming part of the
994 * firmware filename ... but we don't check for that and only rely
995 * on the API version read from firmware header from here on forward
996 */
997 /* no api version check required for experimental uCode */
998 if (priv->fw_index != UCODE_EXPERIMENTAL_INDEX) {
999 if (api_ver < api_min || api_ver > api_max) {
1000 IWL_ERR(priv,
1001 "Driver unable to support your firmware API. "
1002 "Driver supports v%u, firmware is v%u.\n",
1003 api_max, api_ver);
1004 goto try_again;
1005 }
1006
1007 if (api_ver != api_max)
1008 IWL_ERR(priv,
1009 "Firmware has old API version. Expected v%u, "
1010 "got v%u. New firmware can be obtained "
1011 "from http://www.intellinuxwireless.org.\n",
1012 api_max, api_ver);
1013 }
1014
1015 if (build)
1016 sprintf(buildstr, " build %u%s", build,
1017 (priv->fw_index == UCODE_EXPERIMENTAL_INDEX)
1018 ? " (EXP)" : "");
1019 else
1020 buildstr[0] = '\0';
1021
1022 IWL_INFO(priv, "loaded firmware version %u.%u.%u.%u%s\n",
1023 IWL_UCODE_MAJOR(priv->ucode_ver),
1024 IWL_UCODE_MINOR(priv->ucode_ver),
1025 IWL_UCODE_API(priv->ucode_ver),
1026 IWL_UCODE_SERIAL(priv->ucode_ver),
1027 buildstr);
1028
1029 snprintf(priv->hw->wiphy->fw_version,
1030 sizeof(priv->hw->wiphy->fw_version),
1031 "%u.%u.%u.%u%s",
1032 IWL_UCODE_MAJOR(priv->ucode_ver),
1033 IWL_UCODE_MINOR(priv->ucode_ver),
1034 IWL_UCODE_API(priv->ucode_ver),
1035 IWL_UCODE_SERIAL(priv->ucode_ver),
1036 buildstr);
1037
1038 /*
1039 * For any of the failures below (before allocating pci memory)
1040 * we will try to load a version with a smaller API -- maybe the
1041 * user just got a corrupted version of the latest API.
1042 */
1043
1044 IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n",
1045 priv->ucode_ver);
1046 IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %Zd\n",
1047 pieces.inst_size);
1048 IWL_DEBUG_INFO(priv, "f/w package hdr runtime data size = %Zd\n",
1049 pieces.data_size);
1050 IWL_DEBUG_INFO(priv, "f/w package hdr init inst size = %Zd\n",
1051 pieces.init_size);
1052 IWL_DEBUG_INFO(priv, "f/w package hdr init data size = %Zd\n",
1053 pieces.init_data_size);
1054
1055 /* Verify that uCode images will fit in card's SRAM */
1056 if (pieces.inst_size > priv->hw_params.max_inst_size) {
1057 IWL_ERR(priv, "uCode instr len %Zd too large to fit in\n",
1058 pieces.inst_size);
1059 goto try_again;
1060 }
1061
1062 if (pieces.data_size > priv->hw_params.max_data_size) {
1063 IWL_ERR(priv, "uCode data len %Zd too large to fit in\n",
1064 pieces.data_size);
1065 goto try_again;
1066 }
1067
1068 if (pieces.init_size > priv->hw_params.max_inst_size) {
1069 IWL_ERR(priv, "uCode init instr len %Zd too large to fit in\n",
1070 pieces.init_size);
1071 goto try_again;
1072 }
1073
1074 if (pieces.init_data_size > priv->hw_params.max_data_size) {
1075 IWL_ERR(priv, "uCode init data len %Zd too large to fit in\n",
1076 pieces.init_data_size);
1077 goto try_again;
1078 }
1079
1080 /* Allocate ucode buffers for card's bus-master loading ... */
1081
1082 /* Runtime instructions and 2 copies of data:
1083 * 1) unmodified from disk
1084 * 2) backup cache for save/restore during power-downs */
1085 if (iwl_alloc_fw_desc(priv, &priv->ucode_rt.code,
1086 pieces.inst, pieces.inst_size))
1087 goto err_pci_alloc;
1088 if (iwl_alloc_fw_desc(priv, &priv->ucode_rt.data,
1089 pieces.data, pieces.data_size))
1090 goto err_pci_alloc;
1091
1092 /* Initialization instructions and data */
1093 if (pieces.init_size && pieces.init_data_size) {
1094 if (iwl_alloc_fw_desc(priv, &priv->ucode_init.code,
1095 pieces.init, pieces.init_size))
1096 goto err_pci_alloc;
1097 if (iwl_alloc_fw_desc(priv, &priv->ucode_init.data,
1098 pieces.init_data, pieces.init_data_size))
1099 goto err_pci_alloc;
1100 }
1101
1102 /* Now that we can no longer fail, copy information */
1103
1104 /*
1105 * The (size - 16) / 12 formula is based on the information recorded
1106 * for each event, which is of mode 1 (including timestamp) for all
1107 * new microcodes that include this information.
1108 */
1109 priv->_agn.init_evtlog_ptr = pieces.init_evtlog_ptr;
1110 if (pieces.init_evtlog_size)
1111 priv->_agn.init_evtlog_size = (pieces.init_evtlog_size - 16)/12;
1112 else
1113 priv->_agn.init_evtlog_size =
1114 priv->cfg->base_params->max_event_log_size;
1115 priv->_agn.init_errlog_ptr = pieces.init_errlog_ptr;
1116 priv->_agn.inst_evtlog_ptr = pieces.inst_evtlog_ptr;
1117 if (pieces.inst_evtlog_size)
1118 priv->_agn.inst_evtlog_size = (pieces.inst_evtlog_size - 16)/12;
1119 else
1120 priv->_agn.inst_evtlog_size =
1121 priv->cfg->base_params->max_event_log_size;
1122 priv->_agn.inst_errlog_ptr = pieces.inst_errlog_ptr;
1123
1124 priv->new_scan_threshold_behaviour =
1125 !!(ucode_capa.flags & IWL_UCODE_TLV_FLAGS_NEWSCAN);
1126
1127 if ((priv->cfg->sku & EEPROM_SKU_CAP_IPAN_ENABLE) &&
1128 (ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PAN)) {
1129 priv->valid_contexts |= BIT(IWL_RXON_CTX_PAN);
1130 priv->sta_key_max_num = STA_KEY_MAX_NUM_PAN;
1131 } else
1132 priv->sta_key_max_num = STA_KEY_MAX_NUM;
1133
1134 if (priv->valid_contexts != BIT(IWL_RXON_CTX_BSS))
1135 priv->cmd_queue = IWL_IPAN_CMD_QUEUE_NUM;
1136 else
1137 priv->cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM;
1138
1139 /*
1140 * figure out the offset of chain noise reset and gain commands
1141 * base on the size of standard phy calibration commands table size
1142 */
1143 if (ucode_capa.standard_phy_calibration_size >
1144 IWL_MAX_PHY_CALIBRATE_TBL_SIZE)
1145 ucode_capa.standard_phy_calibration_size =
1146 IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE;
1147
1148 priv->_agn.phy_calib_chain_noise_reset_cmd =
1149 ucode_capa.standard_phy_calibration_size;
1150 priv->_agn.phy_calib_chain_noise_gain_cmd =
1151 ucode_capa.standard_phy_calibration_size + 1;
1152
1153 /**************************************************
1154 * This is still part of probe() in a sense...
1155 *
1156 * 9. Setup and register with mac80211 and debugfs
1157 **************************************************/
1158 err = iwl_mac_setup_register(priv, &ucode_capa);
1159 if (err)
1160 goto out_unbind;
1161
1162 err = iwl_dbgfs_register(priv, DRV_NAME);
1163 if (err)
1164 IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
1165
1166 err = sysfs_create_group(&(priv->bus.dev->kobj),
1167 &iwl_attribute_group);
1168 if (err) {
1169 IWL_ERR(priv, "failed to create sysfs device attributes\n");
1170 goto out_unbind;
1171 }
1172
1173 /* We have our copies now, allow OS release its copies */
1174 release_firmware(ucode_raw);
1175 complete(&priv->_agn.firmware_loading_complete);
1176 return;
1177
1178 try_again:
1179 /* try next, if any */
1180 if (iwl_request_firmware(priv, false))
1181 goto out_unbind;
1182 release_firmware(ucode_raw);
1183 return;
1184
1185 err_pci_alloc:
1186 IWL_ERR(priv, "failed to allocate pci memory\n");
1187 iwl_dealloc_ucode(priv);
1188 out_unbind:
1189 complete(&priv->_agn.firmware_loading_complete);
1190 device_release_driver(priv->bus.dev);
1191 release_firmware(ucode_raw);
1192 }
1193
1194 static const char * const desc_lookup_text[] = {
1195 "OK",
1196 "FAIL",
1197 "BAD_PARAM",
1198 "BAD_CHECKSUM",
1199 "NMI_INTERRUPT_WDG",
1200 "SYSASSERT",
1201 "FATAL_ERROR",
1202 "BAD_COMMAND",
1203 "HW_ERROR_TUNE_LOCK",
1204 "HW_ERROR_TEMPERATURE",
1205 "ILLEGAL_CHAN_FREQ",
1206 "VCC_NOT_STABLE",
1207 "FH_ERROR",
1208 "NMI_INTERRUPT_HOST",
1209 "NMI_INTERRUPT_ACTION_PT",
1210 "NMI_INTERRUPT_UNKNOWN",
1211 "UCODE_VERSION_MISMATCH",
1212 "HW_ERROR_ABS_LOCK",
1213 "HW_ERROR_CAL_LOCK_FAIL",
1214 "NMI_INTERRUPT_INST_ACTION_PT",
1215 "NMI_INTERRUPT_DATA_ACTION_PT",
1216 "NMI_TRM_HW_ER",
1217 "NMI_INTERRUPT_TRM",
1218 "NMI_INTERRUPT_BREAK_POINT",
1219 "DEBUG_0",
1220 "DEBUG_1",
1221 "DEBUG_2",
1222 "DEBUG_3",
1223 };
1224
1225 static struct { char *name; u8 num; } advanced_lookup[] = {
1226 { "NMI_INTERRUPT_WDG", 0x34 },
1227 { "SYSASSERT", 0x35 },
1228 { "UCODE_VERSION_MISMATCH", 0x37 },
1229 { "BAD_COMMAND", 0x38 },
1230 { "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C },
1231 { "FATAL_ERROR", 0x3D },
1232 { "NMI_TRM_HW_ERR", 0x46 },
1233 { "NMI_INTERRUPT_TRM", 0x4C },
1234 { "NMI_INTERRUPT_BREAK_POINT", 0x54 },
1235 { "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C },
1236 { "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64 },
1237 { "NMI_INTERRUPT_HOST", 0x66 },
1238 { "NMI_INTERRUPT_ACTION_PT", 0x7C },
1239 { "NMI_INTERRUPT_UNKNOWN", 0x84 },
1240 { "NMI_INTERRUPT_INST_ACTION_PT", 0x86 },
1241 { "ADVANCED_SYSASSERT", 0 },
1242 };
1243
1244 static const char *desc_lookup(u32 num)
1245 {
1246 int i;
1247 int max = ARRAY_SIZE(desc_lookup_text);
1248
1249 if (num < max)
1250 return desc_lookup_text[num];
1251
1252 max = ARRAY_SIZE(advanced_lookup) - 1;
1253 for (i = 0; i < max; i++) {
1254 if (advanced_lookup[i].num == num)
1255 break;
1256 }
1257 return advanced_lookup[i].name;
1258 }
1259
1260 #define ERROR_START_OFFSET (1 * sizeof(u32))
1261 #define ERROR_ELEM_SIZE (7 * sizeof(u32))
1262
1263 void iwl_dump_nic_error_log(struct iwl_priv *priv)
1264 {
1265 u32 base;
1266 struct iwl_error_event_table table;
1267
1268 base = priv->device_pointers.error_event_table;
1269 if (priv->ucode_type == IWL_UCODE_INIT) {
1270 if (!base)
1271 base = priv->_agn.init_errlog_ptr;
1272 } else {
1273 if (!base)
1274 base = priv->_agn.inst_errlog_ptr;
1275 }
1276
1277 if (!iwlagn_hw_valid_rtc_data_addr(base)) {
1278 IWL_ERR(priv,
1279 "Not valid error log pointer 0x%08X for %s uCode\n",
1280 base,
1281 (priv->ucode_type == IWL_UCODE_INIT)
1282 ? "Init" : "RT");
1283 return;
1284 }
1285
1286 iwl_read_targ_mem_words(priv, base, &table, sizeof(table));
1287
1288 if (ERROR_START_OFFSET <= table.valid * ERROR_ELEM_SIZE) {
1289 IWL_ERR(priv, "Start IWL Error Log Dump:\n");
1290 IWL_ERR(priv, "Status: 0x%08lX, count: %d\n",
1291 priv->status, table.valid);
1292 }
1293
1294 priv->isr_stats.err_code = table.error_id;
1295
1296 trace_iwlwifi_dev_ucode_error(priv, table.error_id, table.tsf_low,
1297 table.data1, table.data2, table.line,
1298 table.blink1, table.blink2, table.ilink1,
1299 table.ilink2, table.bcon_time, table.gp1,
1300 table.gp2, table.gp3, table.ucode_ver,
1301 table.hw_ver, table.brd_ver);
1302 IWL_ERR(priv, "0x%08X | %-28s\n", table.error_id,
1303 desc_lookup(table.error_id));
1304 IWL_ERR(priv, "0x%08X | uPc\n", table.pc);
1305 IWL_ERR(priv, "0x%08X | branchlink1\n", table.blink1);
1306 IWL_ERR(priv, "0x%08X | branchlink2\n", table.blink2);
1307 IWL_ERR(priv, "0x%08X | interruptlink1\n", table.ilink1);
1308 IWL_ERR(priv, "0x%08X | interruptlink2\n", table.ilink2);
1309 IWL_ERR(priv, "0x%08X | data1\n", table.data1);
1310 IWL_ERR(priv, "0x%08X | data2\n", table.data2);
1311 IWL_ERR(priv, "0x%08X | line\n", table.line);
1312 IWL_ERR(priv, "0x%08X | beacon time\n", table.bcon_time);
1313 IWL_ERR(priv, "0x%08X | tsf low\n", table.tsf_low);
1314 IWL_ERR(priv, "0x%08X | tsf hi\n", table.tsf_hi);
1315 IWL_ERR(priv, "0x%08X | time gp1\n", table.gp1);
1316 IWL_ERR(priv, "0x%08X | time gp2\n", table.gp2);
1317 IWL_ERR(priv, "0x%08X | time gp3\n", table.gp3);
1318 IWL_ERR(priv, "0x%08X | uCode version\n", table.ucode_ver);
1319 IWL_ERR(priv, "0x%08X | hw version\n", table.hw_ver);
1320 IWL_ERR(priv, "0x%08X | board version\n", table.brd_ver);
1321 IWL_ERR(priv, "0x%08X | hcmd\n", table.hcmd);
1322 }
1323
1324 #define EVENT_START_OFFSET (4 * sizeof(u32))
1325
1326 /**
1327 * iwl_print_event_log - Dump error event log to syslog
1328 *
1329 */
1330 static int iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
1331 u32 num_events, u32 mode,
1332 int pos, char **buf, size_t bufsz)
1333 {
1334 u32 i;
1335 u32 base; /* SRAM byte address of event log header */
1336 u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
1337 u32 ptr; /* SRAM byte address of log data */
1338 u32 ev, time, data; /* event log data */
1339 unsigned long reg_flags;
1340
1341 if (num_events == 0)
1342 return pos;
1343
1344 base = priv->device_pointers.log_event_table;
1345 if (priv->ucode_type == IWL_UCODE_INIT) {
1346 if (!base)
1347 base = priv->_agn.init_evtlog_ptr;
1348 } else {
1349 if (!base)
1350 base = priv->_agn.inst_evtlog_ptr;
1351 }
1352
1353 if (mode == 0)
1354 event_size = 2 * sizeof(u32);
1355 else
1356 event_size = 3 * sizeof(u32);
1357
1358 ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
1359
1360 /* Make sure device is powered up for SRAM reads */
1361 spin_lock_irqsave(&priv->reg_lock, reg_flags);
1362 iwl_grab_nic_access(priv);
1363
1364 /* Set starting address; reads will auto-increment */
1365 iwl_write32(priv, HBUS_TARG_MEM_RADDR, ptr);
1366 rmb();
1367
1368 /* "time" is actually "data" for mode 0 (no timestamp).
1369 * place event id # at far right for easier visual parsing. */
1370 for (i = 0; i < num_events; i++) {
1371 ev = iwl_read32(priv, HBUS_TARG_MEM_RDAT);
1372 time = iwl_read32(priv, HBUS_TARG_MEM_RDAT);
1373 if (mode == 0) {
1374 /* data, ev */
1375 if (bufsz) {
1376 pos += scnprintf(*buf + pos, bufsz - pos,
1377 "EVT_LOG:0x%08x:%04u\n",
1378 time, ev);
1379 } else {
1380 trace_iwlwifi_dev_ucode_event(priv, 0,
1381 time, ev);
1382 IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n",
1383 time, ev);
1384 }
1385 } else {
1386 data = iwl_read32(priv, HBUS_TARG_MEM_RDAT);
1387 if (bufsz) {
1388 pos += scnprintf(*buf + pos, bufsz - pos,
1389 "EVT_LOGT:%010u:0x%08x:%04u\n",
1390 time, data, ev);
1391 } else {
1392 IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n",
1393 time, data, ev);
1394 trace_iwlwifi_dev_ucode_event(priv, time,
1395 data, ev);
1396 }
1397 }
1398 }
1399
1400 /* Allow device to power down */
1401 iwl_release_nic_access(priv);
1402 spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
1403 return pos;
1404 }
1405
1406 /**
1407 * iwl_print_last_event_logs - Dump the newest # of event log to syslog
1408 */
1409 static int iwl_print_last_event_logs(struct iwl_priv *priv, u32 capacity,
1410 u32 num_wraps, u32 next_entry,
1411 u32 size, u32 mode,
1412 int pos, char **buf, size_t bufsz)
1413 {
1414 /*
1415 * display the newest DEFAULT_LOG_ENTRIES entries
1416 * i.e the entries just before the next ont that uCode would fill.
1417 */
1418 if (num_wraps) {
1419 if (next_entry < size) {
1420 pos = iwl_print_event_log(priv,
1421 capacity - (size - next_entry),
1422 size - next_entry, mode,
1423 pos, buf, bufsz);
1424 pos = iwl_print_event_log(priv, 0,
1425 next_entry, mode,
1426 pos, buf, bufsz);
1427 } else
1428 pos = iwl_print_event_log(priv, next_entry - size,
1429 size, mode, pos, buf, bufsz);
1430 } else {
1431 if (next_entry < size) {
1432 pos = iwl_print_event_log(priv, 0, next_entry,
1433 mode, pos, buf, bufsz);
1434 } else {
1435 pos = iwl_print_event_log(priv, next_entry - size,
1436 size, mode, pos, buf, bufsz);
1437 }
1438 }
1439 return pos;
1440 }
1441
1442 #define DEFAULT_DUMP_EVENT_LOG_ENTRIES (20)
1443
1444 int iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
1445 char **buf, bool display)
1446 {
1447 u32 base; /* SRAM byte address of event log header */
1448 u32 capacity; /* event log capacity in # entries */
1449 u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
1450 u32 num_wraps; /* # times uCode wrapped to top of log */
1451 u32 next_entry; /* index of next entry to be written by uCode */
1452 u32 size; /* # entries that we'll print */
1453 u32 logsize;
1454 int pos = 0;
1455 size_t bufsz = 0;
1456
1457 base = priv->device_pointers.log_event_table;
1458 if (priv->ucode_type == IWL_UCODE_INIT) {
1459 logsize = priv->_agn.init_evtlog_size;
1460 if (!base)
1461 base = priv->_agn.init_evtlog_ptr;
1462 } else {
1463 logsize = priv->_agn.inst_evtlog_size;
1464 if (!base)
1465 base = priv->_agn.inst_evtlog_ptr;
1466 }
1467
1468 if (!iwlagn_hw_valid_rtc_data_addr(base)) {
1469 IWL_ERR(priv,
1470 "Invalid event log pointer 0x%08X for %s uCode\n",
1471 base,
1472 (priv->ucode_type == IWL_UCODE_INIT)
1473 ? "Init" : "RT");
1474 return -EINVAL;
1475 }
1476
1477 /* event log header */
1478 capacity = iwl_read_targ_mem(priv, base);
1479 mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
1480 num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
1481 next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
1482
1483 if (capacity > logsize) {
1484 IWL_ERR(priv, "Log capacity %d is bogus, limit to %d entries\n",
1485 capacity, logsize);
1486 capacity = logsize;
1487 }
1488
1489 if (next_entry > logsize) {
1490 IWL_ERR(priv, "Log write index %d is bogus, limit to %d\n",
1491 next_entry, logsize);
1492 next_entry = logsize;
1493 }
1494
1495 size = num_wraps ? capacity : next_entry;
1496
1497 /* bail out if nothing in log */
1498 if (size == 0) {
1499 IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
1500 return pos;
1501 }
1502
1503 /* enable/disable bt channel inhibition */
1504 priv->bt_ch_announce = iwlagn_bt_ch_announce;
1505
1506 #ifdef CONFIG_IWLWIFI_DEBUG
1507 if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) && !full_log)
1508 size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
1509 ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
1510 #else
1511 size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
1512 ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
1513 #endif
1514 IWL_ERR(priv, "Start IWL Event Log Dump: display last %u entries\n",
1515 size);
1516
1517 #ifdef CONFIG_IWLWIFI_DEBUG
1518 if (display) {
1519 if (full_log)
1520 bufsz = capacity * 48;
1521 else
1522 bufsz = size * 48;
1523 *buf = kmalloc(bufsz, GFP_KERNEL);
1524 if (!*buf)
1525 return -ENOMEM;
1526 }
1527 if ((iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) || full_log) {
1528 /*
1529 * if uCode has wrapped back to top of log,
1530 * start at the oldest entry,
1531 * i.e the next one that uCode would fill.
1532 */
1533 if (num_wraps)
1534 pos = iwl_print_event_log(priv, next_entry,
1535 capacity - next_entry, mode,
1536 pos, buf, bufsz);
1537 /* (then/else) start at top of log */
1538 pos = iwl_print_event_log(priv, 0,
1539 next_entry, mode, pos, buf, bufsz);
1540 } else
1541 pos = iwl_print_last_event_logs(priv, capacity, num_wraps,
1542 next_entry, size, mode,
1543 pos, buf, bufsz);
1544 #else
1545 pos = iwl_print_last_event_logs(priv, capacity, num_wraps,
1546 next_entry, size, mode,
1547 pos, buf, bufsz);
1548 #endif
1549 return pos;
1550 }
1551
1552 static void iwl_rf_kill_ct_config(struct iwl_priv *priv)
1553 {
1554 struct iwl_ct_kill_config cmd;
1555 struct iwl_ct_kill_throttling_config adv_cmd;
1556 unsigned long flags;
1557 int ret = 0;
1558
1559 spin_lock_irqsave(&priv->lock, flags);
1560 iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
1561 CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
1562 spin_unlock_irqrestore(&priv->lock, flags);
1563 priv->thermal_throttle.ct_kill_toggle = false;
1564
1565 if (priv->cfg->base_params->support_ct_kill_exit) {
1566 adv_cmd.critical_temperature_enter =
1567 cpu_to_le32(priv->hw_params.ct_kill_threshold);
1568 adv_cmd.critical_temperature_exit =
1569 cpu_to_le32(priv->hw_params.ct_kill_exit_threshold);
1570
1571 ret = trans_send_cmd_pdu(priv,
1572 REPLY_CT_KILL_CONFIG_CMD,
1573 CMD_SYNC, sizeof(adv_cmd), &adv_cmd);
1574 if (ret)
1575 IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n");
1576 else
1577 IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD "
1578 "succeeded, "
1579 "critical temperature enter is %d,"
1580 "exit is %d\n",
1581 priv->hw_params.ct_kill_threshold,
1582 priv->hw_params.ct_kill_exit_threshold);
1583 } else {
1584 cmd.critical_temperature_R =
1585 cpu_to_le32(priv->hw_params.ct_kill_threshold);
1586
1587 ret = trans_send_cmd_pdu(priv,
1588 REPLY_CT_KILL_CONFIG_CMD,
1589 CMD_SYNC, sizeof(cmd), &cmd);
1590 if (ret)
1591 IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n");
1592 else
1593 IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD "
1594 "succeeded, "
1595 "critical temperature is %d\n",
1596 priv->hw_params.ct_kill_threshold);
1597 }
1598 }
1599
1600 static int iwlagn_send_calib_cfg_rt(struct iwl_priv *priv, u32 cfg)
1601 {
1602 struct iwl_calib_cfg_cmd calib_cfg_cmd;
1603 struct iwl_host_cmd cmd = {
1604 .id = CALIBRATION_CFG_CMD,
1605 .len = { sizeof(struct iwl_calib_cfg_cmd), },
1606 .data = { &calib_cfg_cmd, },
1607 };
1608
1609 memset(&calib_cfg_cmd, 0, sizeof(calib_cfg_cmd));
1610 calib_cfg_cmd.ucd_calib_cfg.once.is_enable = IWL_CALIB_INIT_CFG_ALL;
1611 calib_cfg_cmd.ucd_calib_cfg.once.start = cpu_to_le32(cfg);
1612
1613 return trans_send_cmd(priv, &cmd);
1614 }
1615
1616
1617 static int iwlagn_send_tx_ant_config(struct iwl_priv *priv, u8 valid_tx_ant)
1618 {
1619 struct iwl_tx_ant_config_cmd tx_ant_cmd = {
1620 .valid = cpu_to_le32(valid_tx_ant),
1621 };
1622
1623 if (IWL_UCODE_API(priv->ucode_ver) > 1) {
1624 IWL_DEBUG_HC(priv, "select valid tx ant: %u\n", valid_tx_ant);
1625 return trans_send_cmd_pdu(priv,
1626 TX_ANT_CONFIGURATION_CMD,
1627 CMD_SYNC,
1628 sizeof(struct iwl_tx_ant_config_cmd),
1629 &tx_ant_cmd);
1630 } else {
1631 IWL_DEBUG_HC(priv, "TX_ANT_CONFIGURATION_CMD not supported\n");
1632 return -EOPNOTSUPP;
1633 }
1634 }
1635
1636 /**
1637 * iwl_alive_start - called after REPLY_ALIVE notification received
1638 * from protocol/runtime uCode (initialization uCode's
1639 * Alive gets handled by iwl_init_alive_start()).
1640 */
1641 int iwl_alive_start(struct iwl_priv *priv)
1642 {
1643 int ret = 0;
1644 struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
1645
1646 iwl_reset_ict(priv);
1647
1648 IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
1649
1650 /* After the ALIVE response, we can send host commands to the uCode */
1651 set_bit(STATUS_ALIVE, &priv->status);
1652
1653 /* Enable watchdog to monitor the driver tx queues */
1654 iwl_setup_watchdog(priv);
1655
1656 if (iwl_is_rfkill(priv))
1657 return -ERFKILL;
1658
1659 /* download priority table before any calibration request */
1660 if (priv->cfg->bt_params &&
1661 priv->cfg->bt_params->advanced_bt_coexist) {
1662 /* Configure Bluetooth device coexistence support */
1663 if (priv->cfg->bt_params->bt_sco_disable)
1664 priv->bt_enable_pspoll = false;
1665 else
1666 priv->bt_enable_pspoll = true;
1667
1668 priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK;
1669 priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT;
1670 priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT;
1671 iwlagn_send_advance_bt_config(priv);
1672 priv->bt_valid = IWLAGN_BT_VALID_ENABLE_FLAGS;
1673 priv->cur_rssi_ctx = NULL;
1674
1675 iwlagn_send_prio_tbl(priv);
1676
1677 /* FIXME: w/a to force change uCode BT state machine */
1678 ret = iwlagn_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN,
1679 BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
1680 if (ret)
1681 return ret;
1682 ret = iwlagn_send_bt_env(priv, IWL_BT_COEX_ENV_CLOSE,
1683 BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
1684 if (ret)
1685 return ret;
1686 } else {
1687 /*
1688 * default is 2-wire BT coexexistence support
1689 */
1690 iwl_send_bt_config(priv);
1691 }
1692
1693 if (priv->hw_params.calib_rt_cfg)
1694 iwlagn_send_calib_cfg_rt(priv, priv->hw_params.calib_rt_cfg);
1695
1696 ieee80211_wake_queues(priv->hw);
1697
1698 priv->active_rate = IWL_RATES_MASK;
1699
1700 /* Configure Tx antenna selection based on H/W config */
1701 iwlagn_send_tx_ant_config(priv, priv->cfg->valid_tx_ant);
1702
1703 if (iwl_is_associated_ctx(ctx)) {
1704 struct iwl_rxon_cmd *active_rxon =
1705 (struct iwl_rxon_cmd *)&ctx->active;
1706 /* apply any changes in staging */
1707 ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
1708 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
1709 } else {
1710 struct iwl_rxon_context *tmp;
1711 /* Initialize our rx_config data */
1712 for_each_context(priv, tmp)
1713 iwl_connection_init_rx_config(priv, tmp);
1714
1715 iwlagn_set_rxon_chain(priv, ctx);
1716 }
1717
1718 iwl_reset_run_time_calib(priv);
1719
1720 set_bit(STATUS_READY, &priv->status);
1721
1722 /* Configure the adapter for unassociated operation */
1723 ret = iwlagn_commit_rxon(priv, ctx);
1724 if (ret)
1725 return ret;
1726
1727 /* At this point, the NIC is initialized and operational */
1728 iwl_rf_kill_ct_config(priv);
1729
1730 IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
1731
1732 return iwl_power_update_mode(priv, true);
1733 }
1734
1735 static void iwl_cancel_deferred_work(struct iwl_priv *priv);
1736
1737 static void __iwl_down(struct iwl_priv *priv)
1738 {
1739 int exit_pending;
1740
1741 IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n");
1742
1743 iwl_scan_cancel_timeout(priv, 200);
1744
1745 exit_pending = test_and_set_bit(STATUS_EXIT_PENDING, &priv->status);
1746
1747 /* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set
1748 * to prevent rearm timer */
1749 del_timer_sync(&priv->watchdog);
1750
1751 iwl_clear_ucode_stations(priv, NULL);
1752 iwl_dealloc_bcast_stations(priv);
1753 iwl_clear_driver_stations(priv);
1754
1755 /* reset BT coex data */
1756 priv->bt_status = 0;
1757 priv->cur_rssi_ctx = NULL;
1758 priv->bt_is_sco = 0;
1759 if (priv->cfg->bt_params)
1760 priv->bt_traffic_load =
1761 priv->cfg->bt_params->bt_init_traffic_load;
1762 else
1763 priv->bt_traffic_load = 0;
1764 priv->bt_full_concurrent = false;
1765 priv->bt_ci_compliance = 0;
1766
1767 /* Wipe out the EXIT_PENDING status bit if we are not actually
1768 * exiting the module */
1769 if (!exit_pending)
1770 clear_bit(STATUS_EXIT_PENDING, &priv->status);
1771
1772 if (priv->mac80211_registered)
1773 ieee80211_stop_queues(priv->hw);
1774
1775 /* Clear out all status bits but a few that are stable across reset */
1776 priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
1777 STATUS_RF_KILL_HW |
1778 test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
1779 STATUS_GEO_CONFIGURED |
1780 test_bit(STATUS_FW_ERROR, &priv->status) <<
1781 STATUS_FW_ERROR |
1782 test_bit(STATUS_EXIT_PENDING, &priv->status) <<
1783 STATUS_EXIT_PENDING;
1784
1785 iwlagn_stop_device(priv);
1786
1787 dev_kfree_skb(priv->beacon_skb);
1788 priv->beacon_skb = NULL;
1789 }
1790
1791 static void iwl_down(struct iwl_priv *priv)
1792 {
1793 mutex_lock(&priv->mutex);
1794 __iwl_down(priv);
1795 mutex_unlock(&priv->mutex);
1796
1797 iwl_cancel_deferred_work(priv);
1798 }
1799
1800 #define HW_READY_TIMEOUT (50)
1801
1802 /* Note: returns poll_bit return value, which is >= 0 if success */
1803 static int iwl_set_hw_ready(struct iwl_priv *priv)
1804 {
1805 int ret;
1806
1807 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
1808 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY);
1809
1810 /* See if we got it */
1811 ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
1812 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
1813 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
1814 HW_READY_TIMEOUT);
1815
1816 IWL_DEBUG_INFO(priv, "hardware%s ready\n", ret < 0 ? " not" : "");
1817 return ret;
1818 }
1819
1820 /* Note: returns standard 0/-ERROR code */
1821 int iwl_prepare_card_hw(struct iwl_priv *priv)
1822 {
1823 int ret;
1824
1825 IWL_DEBUG_INFO(priv, "iwl_prepare_card_hw enter\n");
1826
1827 ret = iwl_set_hw_ready(priv);
1828 if (ret >= 0)
1829 return 0;
1830
1831 /* If HW is not ready, prepare the conditions to check again */
1832 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
1833 CSR_HW_IF_CONFIG_REG_PREPARE);
1834
1835 ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
1836 ~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE,
1837 CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000);
1838
1839 if (ret < 0)
1840 return ret;
1841
1842 /* HW should be ready by now, check again. */
1843 ret = iwl_set_hw_ready(priv);
1844 if (ret >= 0)
1845 return 0;
1846 return ret;
1847 }
1848
1849 #define MAX_HW_RESTARTS 5
1850
1851 static int __iwl_up(struct iwl_priv *priv)
1852 {
1853 struct iwl_rxon_context *ctx;
1854 int ret;
1855
1856 lockdep_assert_held(&priv->mutex);
1857
1858 if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
1859 IWL_WARN(priv, "Exit pending; will not bring the NIC up\n");
1860 return -EIO;
1861 }
1862
1863 for_each_context(priv, ctx) {
1864 ret = iwlagn_alloc_bcast_station(priv, ctx);
1865 if (ret) {
1866 iwl_dealloc_bcast_stations(priv);
1867 return ret;
1868 }
1869 }
1870
1871 ret = iwlagn_run_init_ucode(priv);
1872 if (ret) {
1873 IWL_ERR(priv, "Failed to run INIT ucode: %d\n", ret);
1874 goto error;
1875 }
1876
1877 ret = iwlagn_load_ucode_wait_alive(priv,
1878 &priv->ucode_rt,
1879 IWL_UCODE_REGULAR);
1880 if (ret) {
1881 IWL_ERR(priv, "Failed to start RT ucode: %d\n", ret);
1882 goto error;
1883 }
1884
1885 ret = iwl_alive_start(priv);
1886 if (ret)
1887 goto error;
1888 return 0;
1889
1890 error:
1891 set_bit(STATUS_EXIT_PENDING, &priv->status);
1892 __iwl_down(priv);
1893 clear_bit(STATUS_EXIT_PENDING, &priv->status);
1894
1895 IWL_ERR(priv, "Unable to initialize device.\n");
1896 return ret;
1897 }
1898
1899
1900 /*****************************************************************************
1901 *
1902 * Workqueue callbacks
1903 *
1904 *****************************************************************************/
1905
1906 static void iwl_bg_run_time_calib_work(struct work_struct *work)
1907 {
1908 struct iwl_priv *priv = container_of(work, struct iwl_priv,
1909 run_time_calib_work);
1910
1911 mutex_lock(&priv->mutex);
1912
1913 if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
1914 test_bit(STATUS_SCANNING, &priv->status)) {
1915 mutex_unlock(&priv->mutex);
1916 return;
1917 }
1918
1919 if (priv->start_calib) {
1920 iwl_chain_noise_calibration(priv);
1921 iwl_sensitivity_calibration(priv);
1922 }
1923
1924 mutex_unlock(&priv->mutex);
1925 }
1926
1927 static void iwlagn_prepare_restart(struct iwl_priv *priv)
1928 {
1929 struct iwl_rxon_context *ctx;
1930 bool bt_full_concurrent;
1931 u8 bt_ci_compliance;
1932 u8 bt_load;
1933 u8 bt_status;
1934 bool bt_is_sco;
1935
1936 lockdep_assert_held(&priv->mutex);
1937
1938 for_each_context(priv, ctx)
1939 ctx->vif = NULL;
1940 priv->is_open = 0;
1941
1942 /*
1943 * __iwl_down() will clear the BT status variables,
1944 * which is correct, but when we restart we really
1945 * want to keep them so restore them afterwards.
1946 *
1947 * The restart process will later pick them up and
1948 * re-configure the hw when we reconfigure the BT
1949 * command.
1950 */
1951 bt_full_concurrent = priv->bt_full_concurrent;
1952 bt_ci_compliance = priv->bt_ci_compliance;
1953 bt_load = priv->bt_traffic_load;
1954 bt_status = priv->bt_status;
1955 bt_is_sco = priv->bt_is_sco;
1956
1957 __iwl_down(priv);
1958
1959 priv->bt_full_concurrent = bt_full_concurrent;
1960 priv->bt_ci_compliance = bt_ci_compliance;
1961 priv->bt_traffic_load = bt_load;
1962 priv->bt_status = bt_status;
1963 priv->bt_is_sco = bt_is_sco;
1964 }
1965
1966 static void iwl_bg_restart(struct work_struct *data)
1967 {
1968 struct iwl_priv *priv = container_of(data, struct iwl_priv, restart);
1969
1970 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
1971 return;
1972
1973 if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) {
1974 mutex_lock(&priv->mutex);
1975 iwlagn_prepare_restart(priv);
1976 mutex_unlock(&priv->mutex);
1977 iwl_cancel_deferred_work(priv);
1978 ieee80211_restart_hw(priv->hw);
1979 } else {
1980 WARN_ON(1);
1981 }
1982 }
1983
1984 static int iwl_mac_offchannel_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
1985 struct ieee80211_channel *chan,
1986 enum nl80211_channel_type channel_type,
1987 unsigned int wait)
1988 {
1989 struct iwl_priv *priv = hw->priv;
1990 int ret;
1991
1992 /* Not supported if we don't have PAN */
1993 if (!(priv->valid_contexts & BIT(IWL_RXON_CTX_PAN))) {
1994 ret = -EOPNOTSUPP;
1995 goto free;
1996 }
1997
1998 /* Not supported on pre-P2P firmware */
1999 if (!(priv->contexts[IWL_RXON_CTX_PAN].interface_modes &
2000 BIT(NL80211_IFTYPE_P2P_CLIENT))) {
2001 ret = -EOPNOTSUPP;
2002 goto free;
2003 }
2004
2005 mutex_lock(&priv->mutex);
2006
2007 if (!priv->contexts[IWL_RXON_CTX_PAN].is_active) {
2008 /*
2009 * If the PAN context is free, use the normal
2010 * way of doing remain-on-channel offload + TX.
2011 */
2012 ret = 1;
2013 goto out;
2014 }
2015
2016 /* TODO: queue up if scanning? */
2017 if (test_bit(STATUS_SCANNING, &priv->status) ||
2018 priv->_agn.offchan_tx_skb) {
2019 ret = -EBUSY;
2020 goto out;
2021 }
2022
2023 /*
2024 * max_scan_ie_len doesn't include the blank SSID or the header,
2025 * so need to add that again here.
2026 */
2027 if (skb->len > hw->wiphy->max_scan_ie_len + 24 + 2) {
2028 ret = -ENOBUFS;
2029 goto out;
2030 }
2031
2032 priv->_agn.offchan_tx_skb = skb;
2033 priv->_agn.offchan_tx_timeout = wait;
2034 priv->_agn.offchan_tx_chan = chan;
2035
2036 ret = iwl_scan_initiate(priv, priv->contexts[IWL_RXON_CTX_PAN].vif,
2037 IWL_SCAN_OFFCH_TX, chan->band);
2038 if (ret)
2039 priv->_agn.offchan_tx_skb = NULL;
2040 out:
2041 mutex_unlock(&priv->mutex);
2042 free:
2043 if (ret < 0)
2044 kfree_skb(skb);
2045
2046 return ret;
2047 }
2048
2049 static int iwl_mac_offchannel_tx_cancel_wait(struct ieee80211_hw *hw)
2050 {
2051 struct iwl_priv *priv = hw->priv;
2052 int ret;
2053
2054 mutex_lock(&priv->mutex);
2055
2056 if (!priv->_agn.offchan_tx_skb) {
2057 ret = -EINVAL;
2058 goto unlock;
2059 }
2060
2061 priv->_agn.offchan_tx_skb = NULL;
2062
2063 ret = iwl_scan_cancel_timeout(priv, 200);
2064 if (ret)
2065 ret = -EIO;
2066 unlock:
2067 mutex_unlock(&priv->mutex);
2068
2069 return ret;
2070 }
2071
2072 /*****************************************************************************
2073 *
2074 * mac80211 entry point functions
2075 *
2076 *****************************************************************************/
2077
2078 static const struct ieee80211_iface_limit iwlagn_sta_ap_limits[] = {
2079 {
2080 .max = 1,
2081 .types = BIT(NL80211_IFTYPE_STATION),
2082 },
2083 {
2084 .max = 1,
2085 .types = BIT(NL80211_IFTYPE_AP),
2086 },
2087 };
2088
2089 static const struct ieee80211_iface_limit iwlagn_2sta_limits[] = {
2090 {
2091 .max = 2,
2092 .types = BIT(NL80211_IFTYPE_STATION),
2093 },
2094 };
2095
2096 static const struct ieee80211_iface_limit iwlagn_p2p_sta_go_limits[] = {
2097 {
2098 .max = 1,
2099 .types = BIT(NL80211_IFTYPE_STATION),
2100 },
2101 {
2102 .max = 1,
2103 .types = BIT(NL80211_IFTYPE_P2P_GO) |
2104 BIT(NL80211_IFTYPE_AP),
2105 },
2106 };
2107
2108 static const struct ieee80211_iface_limit iwlagn_p2p_2sta_limits[] = {
2109 {
2110 .max = 2,
2111 .types = BIT(NL80211_IFTYPE_STATION),
2112 },
2113 {
2114 .max = 1,
2115 .types = BIT(NL80211_IFTYPE_P2P_CLIENT),
2116 },
2117 };
2118
2119 static const struct ieee80211_iface_combination
2120 iwlagn_iface_combinations_dualmode[] = {
2121 { .num_different_channels = 1,
2122 .max_interfaces = 2,
2123 .beacon_int_infra_match = true,
2124 .limits = iwlagn_sta_ap_limits,
2125 .n_limits = ARRAY_SIZE(iwlagn_sta_ap_limits),
2126 },
2127 { .num_different_channels = 1,
2128 .max_interfaces = 2,
2129 .limits = iwlagn_2sta_limits,
2130 .n_limits = ARRAY_SIZE(iwlagn_2sta_limits),
2131 },
2132 };
2133
2134 static const struct ieee80211_iface_combination
2135 iwlagn_iface_combinations_p2p[] = {
2136 { .num_different_channels = 1,
2137 .max_interfaces = 2,
2138 .beacon_int_infra_match = true,
2139 .limits = iwlagn_p2p_sta_go_limits,
2140 .n_limits = ARRAY_SIZE(iwlagn_p2p_sta_go_limits),
2141 },
2142 { .num_different_channels = 1,
2143 .max_interfaces = 2,
2144 .limits = iwlagn_p2p_2sta_limits,
2145 .n_limits = ARRAY_SIZE(iwlagn_p2p_2sta_limits),
2146 },
2147 };
2148
2149 /*
2150 * Not a mac80211 entry point function, but it fits in with all the
2151 * other mac80211 functions grouped here.
2152 */
2153 static int iwl_mac_setup_register(struct iwl_priv *priv,
2154 struct iwlagn_ucode_capabilities *capa)
2155 {
2156 int ret;
2157 struct ieee80211_hw *hw = priv->hw;
2158 struct iwl_rxon_context *ctx;
2159
2160 hw->rate_control_algorithm = "iwl-agn-rs";
2161
2162 /* Tell mac80211 our characteristics */
2163 hw->flags = IEEE80211_HW_SIGNAL_DBM |
2164 IEEE80211_HW_AMPDU_AGGREGATION |
2165 IEEE80211_HW_NEED_DTIM_PERIOD |
2166 IEEE80211_HW_SPECTRUM_MGMT |
2167 IEEE80211_HW_REPORTS_TX_ACK_STATUS;
2168
2169 hw->max_tx_aggregation_subframes = LINK_QUAL_AGG_FRAME_LIMIT_DEF;
2170
2171 hw->flags |= IEEE80211_HW_SUPPORTS_PS |
2172 IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
2173
2174 if (priv->cfg->sku & EEPROM_SKU_CAP_11N_ENABLE)
2175 hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS |
2176 IEEE80211_HW_SUPPORTS_STATIC_SMPS;
2177
2178 if (capa->flags & IWL_UCODE_TLV_FLAGS_MFP)
2179 hw->flags |= IEEE80211_HW_MFP_CAPABLE;
2180
2181 hw->sta_data_size = sizeof(struct iwl_station_priv);
2182 hw->vif_data_size = sizeof(struct iwl_vif_priv);
2183
2184 for_each_context(priv, ctx) {
2185 hw->wiphy->interface_modes |= ctx->interface_modes;
2186 hw->wiphy->interface_modes |= ctx->exclusive_interface_modes;
2187 }
2188
2189 BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
2190
2191 if (hw->wiphy->interface_modes & BIT(NL80211_IFTYPE_P2P_CLIENT)) {
2192 hw->wiphy->iface_combinations = iwlagn_iface_combinations_p2p;
2193 hw->wiphy->n_iface_combinations =
2194 ARRAY_SIZE(iwlagn_iface_combinations_p2p);
2195 } else if (hw->wiphy->interface_modes & BIT(NL80211_IFTYPE_AP)) {
2196 hw->wiphy->iface_combinations = iwlagn_iface_combinations_dualmode;
2197 hw->wiphy->n_iface_combinations =
2198 ARRAY_SIZE(iwlagn_iface_combinations_dualmode);
2199 }
2200
2201 hw->wiphy->max_remain_on_channel_duration = 1000;
2202
2203 hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
2204 WIPHY_FLAG_DISABLE_BEACON_HINTS |
2205 WIPHY_FLAG_IBSS_RSN;
2206
2207 if (iwlagn_mod_params.power_save)
2208 hw->wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT;
2209 else
2210 hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
2211
2212 hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
2213 /* we create the 802.11 header and a zero-length SSID element */
2214 hw->wiphy->max_scan_ie_len = capa->max_probe_length - 24 - 2;
2215
2216 /* Default value; 4 EDCA QOS priorities */
2217 hw->queues = 4;
2218
2219 hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
2220
2221 if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
2222 priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
2223 &priv->bands[IEEE80211_BAND_2GHZ];
2224 if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
2225 priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
2226 &priv->bands[IEEE80211_BAND_5GHZ];
2227
2228 iwl_leds_init(priv);
2229
2230 ret = ieee80211_register_hw(priv->hw);
2231 if (ret) {
2232 IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
2233 return ret;
2234 }
2235 priv->mac80211_registered = 1;
2236
2237 return 0;
2238 }
2239
2240
2241 static int iwlagn_mac_start(struct ieee80211_hw *hw)
2242 {
2243 struct iwl_priv *priv = hw->priv;
2244 int ret;
2245
2246 IWL_DEBUG_MAC80211(priv, "enter\n");
2247
2248 /* we should be verifying the device is ready to be opened */
2249 mutex_lock(&priv->mutex);
2250 ret = __iwl_up(priv);
2251 mutex_unlock(&priv->mutex);
2252 if (ret)
2253 return ret;
2254
2255 IWL_DEBUG_INFO(priv, "Start UP work done.\n");
2256
2257 /* Now we should be done, and the READY bit should be set. */
2258 if (WARN_ON(!test_bit(STATUS_READY, &priv->status)))
2259 ret = -EIO;
2260
2261 iwlagn_led_enable(priv);
2262
2263 priv->is_open = 1;
2264 IWL_DEBUG_MAC80211(priv, "leave\n");
2265 return 0;
2266 }
2267
2268 static void iwlagn_mac_stop(struct ieee80211_hw *hw)
2269 {
2270 struct iwl_priv *priv = hw->priv;
2271
2272 IWL_DEBUG_MAC80211(priv, "enter\n");
2273
2274 if (!priv->is_open)
2275 return;
2276
2277 priv->is_open = 0;
2278
2279 iwl_down(priv);
2280
2281 flush_workqueue(priv->workqueue);
2282
2283 /* User space software may expect getting rfkill changes
2284 * even if interface is down */
2285 iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
2286 iwl_enable_rfkill_int(priv);
2287
2288 IWL_DEBUG_MAC80211(priv, "leave\n");
2289 }
2290
2291 static void iwlagn_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
2292 {
2293 struct iwl_priv *priv = hw->priv;
2294
2295 IWL_DEBUG_MACDUMP(priv, "enter\n");
2296
2297 IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
2298 ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
2299
2300 if (iwlagn_tx_skb(priv, skb))
2301 dev_kfree_skb_any(skb);
2302
2303 IWL_DEBUG_MACDUMP(priv, "leave\n");
2304 }
2305
2306 static void iwlagn_mac_update_tkip_key(struct ieee80211_hw *hw,
2307 struct ieee80211_vif *vif,
2308 struct ieee80211_key_conf *keyconf,
2309 struct ieee80211_sta *sta,
2310 u32 iv32, u16 *phase1key)
2311 {
2312 struct iwl_priv *priv = hw->priv;
2313 struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
2314
2315 IWL_DEBUG_MAC80211(priv, "enter\n");
2316
2317 iwl_update_tkip_key(priv, vif_priv->ctx, keyconf, sta,
2318 iv32, phase1key);
2319
2320 IWL_DEBUG_MAC80211(priv, "leave\n");
2321 }
2322
2323 static int iwlagn_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
2324 struct ieee80211_vif *vif,
2325 struct ieee80211_sta *sta,
2326 struct ieee80211_key_conf *key)
2327 {
2328 struct iwl_priv *priv = hw->priv;
2329 struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
2330 struct iwl_rxon_context *ctx = vif_priv->ctx;
2331 int ret;
2332 u8 sta_id;
2333 bool is_default_wep_key = false;
2334
2335 IWL_DEBUG_MAC80211(priv, "enter\n");
2336
2337 if (iwlagn_mod_params.sw_crypto) {
2338 IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n");
2339 return -EOPNOTSUPP;
2340 }
2341
2342 /*
2343 * To support IBSS RSN, don't program group keys in IBSS, the
2344 * hardware will then not attempt to decrypt the frames.
2345 */
2346 if (vif->type == NL80211_IFTYPE_ADHOC &&
2347 !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE))
2348 return -EOPNOTSUPP;
2349
2350 sta_id = iwl_sta_id_or_broadcast(priv, vif_priv->ctx, sta);
2351 if (sta_id == IWL_INVALID_STATION)
2352 return -EINVAL;
2353
2354 mutex_lock(&priv->mutex);
2355 iwl_scan_cancel_timeout(priv, 100);
2356
2357 /*
2358 * If we are getting WEP group key and we didn't receive any key mapping
2359 * so far, we are in legacy wep mode (group key only), otherwise we are
2360 * in 1X mode.
2361 * In legacy wep mode, we use another host command to the uCode.
2362 */
2363 if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
2364 key->cipher == WLAN_CIPHER_SUITE_WEP104) &&
2365 !sta) {
2366 if (cmd == SET_KEY)
2367 is_default_wep_key = !ctx->key_mapping_keys;
2368 else
2369 is_default_wep_key =
2370 (key->hw_key_idx == HW_KEY_DEFAULT);
2371 }
2372
2373 switch (cmd) {
2374 case SET_KEY:
2375 if (is_default_wep_key)
2376 ret = iwl_set_default_wep_key(priv, vif_priv->ctx, key);
2377 else
2378 ret = iwl_set_dynamic_key(priv, vif_priv->ctx,
2379 key, sta_id);
2380
2381 IWL_DEBUG_MAC80211(priv, "enable hwcrypto key\n");
2382 break;
2383 case DISABLE_KEY:
2384 if (is_default_wep_key)
2385 ret = iwl_remove_default_wep_key(priv, ctx, key);
2386 else
2387 ret = iwl_remove_dynamic_key(priv, ctx, key, sta_id);
2388
2389 IWL_DEBUG_MAC80211(priv, "disable hwcrypto key\n");
2390 break;
2391 default:
2392 ret = -EINVAL;
2393 }
2394
2395 mutex_unlock(&priv->mutex);
2396 IWL_DEBUG_MAC80211(priv, "leave\n");
2397
2398 return ret;
2399 }
2400
2401 static int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw,
2402 struct ieee80211_vif *vif,
2403 enum ieee80211_ampdu_mlme_action action,
2404 struct ieee80211_sta *sta, u16 tid, u16 *ssn,
2405 u8 buf_size)
2406 {
2407 struct iwl_priv *priv = hw->priv;
2408 int ret = -EINVAL;
2409 struct iwl_station_priv *sta_priv = (void *) sta->drv_priv;
2410
2411 IWL_DEBUG_HT(priv, "A-MPDU action on addr %pM tid %d\n",
2412 sta->addr, tid);
2413
2414 if (!(priv->cfg->sku & EEPROM_SKU_CAP_11N_ENABLE))
2415 return -EACCES;
2416
2417 mutex_lock(&priv->mutex);
2418
2419 switch (action) {
2420 case IEEE80211_AMPDU_RX_START:
2421 IWL_DEBUG_HT(priv, "start Rx\n");
2422 ret = iwl_sta_rx_agg_start(priv, sta, tid, *ssn);
2423 break;
2424 case IEEE80211_AMPDU_RX_STOP:
2425 IWL_DEBUG_HT(priv, "stop Rx\n");
2426 ret = iwl_sta_rx_agg_stop(priv, sta, tid);
2427 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2428 ret = 0;
2429 break;
2430 case IEEE80211_AMPDU_TX_START:
2431 IWL_DEBUG_HT(priv, "start Tx\n");
2432 ret = iwlagn_tx_agg_start(priv, vif, sta, tid, ssn);
2433 if (ret == 0) {
2434 priv->_agn.agg_tids_count++;
2435 IWL_DEBUG_HT(priv, "priv->_agn.agg_tids_count = %u\n",
2436 priv->_agn.agg_tids_count);
2437 }
2438 break;
2439 case IEEE80211_AMPDU_TX_STOP:
2440 IWL_DEBUG_HT(priv, "stop Tx\n");
2441 ret = iwlagn_tx_agg_stop(priv, vif, sta, tid);
2442 if ((ret == 0) && (priv->_agn.agg_tids_count > 0)) {
2443 priv->_agn.agg_tids_count--;
2444 IWL_DEBUG_HT(priv, "priv->_agn.agg_tids_count = %u\n",
2445 priv->_agn.agg_tids_count);
2446 }
2447 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2448 ret = 0;
2449 if (priv->cfg->ht_params &&
2450 priv->cfg->ht_params->use_rts_for_aggregation) {
2451 /*
2452 * switch off RTS/CTS if it was previously enabled
2453 */
2454 sta_priv->lq_sta.lq.general_params.flags &=
2455 ~LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK;
2456 iwl_send_lq_cmd(priv, iwl_rxon_ctx_from_vif(vif),
2457 &sta_priv->lq_sta.lq, CMD_ASYNC, false);
2458 }
2459 break;
2460 case IEEE80211_AMPDU_TX_OPERATIONAL:
2461 buf_size = min_t(int, buf_size, LINK_QUAL_AGG_FRAME_LIMIT_DEF);
2462
2463 iwlagn_txq_agg_queue_setup(priv, sta, tid, buf_size);
2464
2465 /*
2466 * If the limit is 0, then it wasn't initialised yet,
2467 * use the default. We can do that since we take the
2468 * minimum below, and we don't want to go above our
2469 * default due to hardware restrictions.
2470 */
2471 if (sta_priv->max_agg_bufsize == 0)
2472 sta_priv->max_agg_bufsize =
2473 LINK_QUAL_AGG_FRAME_LIMIT_DEF;
2474
2475 /*
2476 * Even though in theory the peer could have different
2477 * aggregation reorder buffer sizes for different sessions,
2478 * our ucode doesn't allow for that and has a global limit
2479 * for each station. Therefore, use the minimum of all the
2480 * aggregation sessions and our default value.
2481 */
2482 sta_priv->max_agg_bufsize =
2483 min(sta_priv->max_agg_bufsize, buf_size);
2484
2485 if (priv->cfg->ht_params &&
2486 priv->cfg->ht_params->use_rts_for_aggregation) {
2487 /*
2488 * switch to RTS/CTS if it is the prefer protection
2489 * method for HT traffic
2490 */
2491
2492 sta_priv->lq_sta.lq.general_params.flags |=
2493 LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK;
2494 }
2495
2496 sta_priv->lq_sta.lq.agg_params.agg_frame_cnt_limit =
2497 sta_priv->max_agg_bufsize;
2498
2499 iwl_send_lq_cmd(priv, iwl_rxon_ctx_from_vif(vif),
2500 &sta_priv->lq_sta.lq, CMD_ASYNC, false);
2501
2502 IWL_INFO(priv, "Tx aggregation enabled on ra = %pM tid = %d\n",
2503 sta->addr, tid);
2504 ret = 0;
2505 break;
2506 }
2507 mutex_unlock(&priv->mutex);
2508
2509 return ret;
2510 }
2511
2512 static int iwlagn_mac_sta_add(struct ieee80211_hw *hw,
2513 struct ieee80211_vif *vif,
2514 struct ieee80211_sta *sta)
2515 {
2516 struct iwl_priv *priv = hw->priv;
2517 struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
2518 struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
2519 bool is_ap = vif->type == NL80211_IFTYPE_STATION;
2520 int ret;
2521 u8 sta_id;
2522
2523 IWL_DEBUG_INFO(priv, "received request to add station %pM\n",
2524 sta->addr);
2525 mutex_lock(&priv->mutex);
2526 IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n",
2527 sta->addr);
2528 sta_priv->common.sta_id = IWL_INVALID_STATION;
2529
2530 atomic_set(&sta_priv->pending_frames, 0);
2531 if (vif->type == NL80211_IFTYPE_AP)
2532 sta_priv->client = true;
2533
2534 ret = iwl_add_station_common(priv, vif_priv->ctx, sta->addr,
2535 is_ap, sta, &sta_id);
2536 if (ret) {
2537 IWL_ERR(priv, "Unable to add station %pM (%d)\n",
2538 sta->addr, ret);
2539 /* Should we return success if return code is EEXIST ? */
2540 mutex_unlock(&priv->mutex);
2541 return ret;
2542 }
2543
2544 sta_priv->common.sta_id = sta_id;
2545
2546 /* Initialize rate scaling */
2547 IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n",
2548 sta->addr);
2549 iwl_rs_rate_init(priv, sta, sta_id);
2550 mutex_unlock(&priv->mutex);
2551
2552 return 0;
2553 }
2554
2555 static void iwlagn_mac_channel_switch(struct ieee80211_hw *hw,
2556 struct ieee80211_channel_switch *ch_switch)
2557 {
2558 struct iwl_priv *priv = hw->priv;
2559 const struct iwl_channel_info *ch_info;
2560 struct ieee80211_conf *conf = &hw->conf;
2561 struct ieee80211_channel *channel = ch_switch->channel;
2562 struct iwl_ht_config *ht_conf = &priv->current_ht_config;
2563 /*
2564 * MULTI-FIXME
2565 * When we add support for multiple interfaces, we need to
2566 * revisit this. The channel switch command in the device
2567 * only affects the BSS context, but what does that really
2568 * mean? And what if we get a CSA on the second interface?
2569 * This needs a lot of work.
2570 */
2571 struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
2572 u16 ch;
2573
2574 IWL_DEBUG_MAC80211(priv, "enter\n");
2575
2576 mutex_lock(&priv->mutex);
2577
2578 if (iwl_is_rfkill(priv))
2579 goto out;
2580
2581 if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
2582 test_bit(STATUS_SCANNING, &priv->status) ||
2583 test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
2584 goto out;
2585
2586 if (!iwl_is_associated_ctx(ctx))
2587 goto out;
2588
2589 if (!priv->cfg->lib->set_channel_switch)
2590 goto out;
2591
2592 ch = channel->hw_value;
2593 if (le16_to_cpu(ctx->active.channel) == ch)
2594 goto out;
2595
2596 ch_info = iwl_get_channel_info(priv, channel->band, ch);
2597 if (!is_channel_valid(ch_info)) {
2598 IWL_DEBUG_MAC80211(priv, "invalid channel\n");
2599 goto out;
2600 }
2601
2602 spin_lock_irq(&priv->lock);
2603
2604 priv->current_ht_config.smps = conf->smps_mode;
2605
2606 /* Configure HT40 channels */
2607 ctx->ht.enabled = conf_is_ht(conf);
2608 if (ctx->ht.enabled) {
2609 if (conf_is_ht40_minus(conf)) {
2610 ctx->ht.extension_chan_offset =
2611 IEEE80211_HT_PARAM_CHA_SEC_BELOW;
2612 ctx->ht.is_40mhz = true;
2613 } else if (conf_is_ht40_plus(conf)) {
2614 ctx->ht.extension_chan_offset =
2615 IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
2616 ctx->ht.is_40mhz = true;
2617 } else {
2618 ctx->ht.extension_chan_offset =
2619 IEEE80211_HT_PARAM_CHA_SEC_NONE;
2620 ctx->ht.is_40mhz = false;
2621 }
2622 } else
2623 ctx->ht.is_40mhz = false;
2624
2625 if ((le16_to_cpu(ctx->staging.channel) != ch))
2626 ctx->staging.flags = 0;
2627
2628 iwl_set_rxon_channel(priv, channel, ctx);
2629 iwl_set_rxon_ht(priv, ht_conf);
2630 iwl_set_flags_for_band(priv, ctx, channel->band, ctx->vif);
2631
2632 spin_unlock_irq(&priv->lock);
2633
2634 iwl_set_rate(priv);
2635 /*
2636 * at this point, staging_rxon has the
2637 * configuration for channel switch
2638 */
2639 set_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status);
2640 priv->switch_channel = cpu_to_le16(ch);
2641 if (priv->cfg->lib->set_channel_switch(priv, ch_switch)) {
2642 clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status);
2643 priv->switch_channel = 0;
2644 ieee80211_chswitch_done(ctx->vif, false);
2645 }
2646
2647 out:
2648 mutex_unlock(&priv->mutex);
2649 IWL_DEBUG_MAC80211(priv, "leave\n");
2650 }
2651
2652 static void iwlagn_configure_filter(struct ieee80211_hw *hw,
2653 unsigned int changed_flags,
2654 unsigned int *total_flags,
2655 u64 multicast)
2656 {
2657 struct iwl_priv *priv = hw->priv;
2658 __le32 filter_or = 0, filter_nand = 0;
2659 struct iwl_rxon_context *ctx;
2660
2661 #define CHK(test, flag) do { \
2662 if (*total_flags & (test)) \
2663 filter_or |= (flag); \
2664 else \
2665 filter_nand |= (flag); \
2666 } while (0)
2667
2668 IWL_DEBUG_MAC80211(priv, "Enter: changed: 0x%x, total: 0x%x\n",
2669 changed_flags, *total_flags);
2670
2671 CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK);
2672 /* Setting _just_ RXON_FILTER_CTL2HOST_MSK causes FH errors */
2673 CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_PROMISC_MSK);
2674 CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);
2675
2676 #undef CHK
2677
2678 mutex_lock(&priv->mutex);
2679
2680 for_each_context(priv, ctx) {
2681 ctx->staging.filter_flags &= ~filter_nand;
2682 ctx->staging.filter_flags |= filter_or;
2683
2684 /*
2685 * Not committing directly because hardware can perform a scan,
2686 * but we'll eventually commit the filter flags change anyway.
2687 */
2688 }
2689
2690 mutex_unlock(&priv->mutex);
2691
2692 /*
2693 * Receiving all multicast frames is always enabled by the
2694 * default flags setup in iwl_connection_init_rx_config()
2695 * since we currently do not support programming multicast
2696 * filters into the device.
2697 */
2698 *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS |
2699 FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
2700 }
2701
2702 static void iwlagn_mac_flush(struct ieee80211_hw *hw, bool drop)
2703 {
2704 struct iwl_priv *priv = hw->priv;
2705
2706 mutex_lock(&priv->mutex);
2707 IWL_DEBUG_MAC80211(priv, "enter\n");
2708
2709 if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
2710 IWL_DEBUG_TX(priv, "Aborting flush due to device shutdown\n");
2711 goto done;
2712 }
2713 if (iwl_is_rfkill(priv)) {
2714 IWL_DEBUG_TX(priv, "Aborting flush due to RF Kill\n");
2715 goto done;
2716 }
2717
2718 /*
2719 * mac80211 will not push any more frames for transmit
2720 * until the flush is completed
2721 */
2722 if (drop) {
2723 IWL_DEBUG_MAC80211(priv, "send flush command\n");
2724 if (iwlagn_txfifo_flush(priv, IWL_DROP_ALL)) {
2725 IWL_ERR(priv, "flush request fail\n");
2726 goto done;
2727 }
2728 }
2729 IWL_DEBUG_MAC80211(priv, "wait transmit/flush all frames\n");
2730 iwlagn_wait_tx_queue_empty(priv);
2731 done:
2732 mutex_unlock(&priv->mutex);
2733 IWL_DEBUG_MAC80211(priv, "leave\n");
2734 }
2735
2736 static void iwlagn_disable_roc(struct iwl_priv *priv)
2737 {
2738 struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_PAN];
2739 struct ieee80211_channel *chan = ACCESS_ONCE(priv->hw->conf.channel);
2740
2741 lockdep_assert_held(&priv->mutex);
2742
2743 if (!ctx->is_active)
2744 return;
2745
2746 ctx->staging.dev_type = RXON_DEV_TYPE_2STA;
2747 ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2748 iwl_set_rxon_channel(priv, chan, ctx);
2749 iwl_set_flags_for_band(priv, ctx, chan->band, NULL);
2750
2751 priv->_agn.hw_roc_channel = NULL;
2752
2753 iwlagn_commit_rxon(priv, ctx);
2754
2755 ctx->is_active = false;
2756 }
2757
2758 static void iwlagn_bg_roc_done(struct work_struct *work)
2759 {
2760 struct iwl_priv *priv = container_of(work, struct iwl_priv,
2761 _agn.hw_roc_work.work);
2762
2763 mutex_lock(&priv->mutex);
2764 ieee80211_remain_on_channel_expired(priv->hw);
2765 iwlagn_disable_roc(priv);
2766 mutex_unlock(&priv->mutex);
2767 }
2768
2769 static int iwl_mac_remain_on_channel(struct ieee80211_hw *hw,
2770 struct ieee80211_channel *channel,
2771 enum nl80211_channel_type channel_type,
2772 int duration)
2773 {
2774 struct iwl_priv *priv = hw->priv;
2775 int err = 0;
2776
2777 if (!(priv->valid_contexts & BIT(IWL_RXON_CTX_PAN)))
2778 return -EOPNOTSUPP;
2779
2780 if (!(priv->contexts[IWL_RXON_CTX_PAN].interface_modes &
2781 BIT(NL80211_IFTYPE_P2P_CLIENT)))
2782 return -EOPNOTSUPP;
2783
2784 mutex_lock(&priv->mutex);
2785
2786 if (priv->contexts[IWL_RXON_CTX_PAN].is_active ||
2787 test_bit(STATUS_SCAN_HW, &priv->status)) {
2788 err = -EBUSY;
2789 goto out;
2790 }
2791
2792 priv->contexts[IWL_RXON_CTX_PAN].is_active = true;
2793 priv->_agn.hw_roc_channel = channel;
2794 priv->_agn.hw_roc_chantype = channel_type;
2795 priv->_agn.hw_roc_duration = DIV_ROUND_UP(duration * 1000, 1024);
2796 iwlagn_commit_rxon(priv, &priv->contexts[IWL_RXON_CTX_PAN]);
2797 queue_delayed_work(priv->workqueue, &priv->_agn.hw_roc_work,
2798 msecs_to_jiffies(duration + 20));
2799
2800 msleep(IWL_MIN_SLOT_TIME); /* TU is almost ms */
2801 ieee80211_ready_on_channel(priv->hw);
2802
2803 out:
2804 mutex_unlock(&priv->mutex);
2805
2806 return err;
2807 }
2808
2809 static int iwl_mac_cancel_remain_on_channel(struct ieee80211_hw *hw)
2810 {
2811 struct iwl_priv *priv = hw->priv;
2812
2813 if (!(priv->valid_contexts & BIT(IWL_RXON_CTX_PAN)))
2814 return -EOPNOTSUPP;
2815
2816 cancel_delayed_work_sync(&priv->_agn.hw_roc_work);
2817
2818 mutex_lock(&priv->mutex);
2819 iwlagn_disable_roc(priv);
2820 mutex_unlock(&priv->mutex);
2821
2822 return 0;
2823 }
2824
2825 /*****************************************************************************
2826 *
2827 * driver setup and teardown
2828 *
2829 *****************************************************************************/
2830
2831 static void iwl_setup_deferred_work(struct iwl_priv *priv)
2832 {
2833 priv->workqueue = create_singlethread_workqueue(DRV_NAME);
2834
2835 init_waitqueue_head(&priv->wait_command_queue);
2836
2837 INIT_WORK(&priv->restart, iwl_bg_restart);
2838 INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update);
2839 INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work);
2840 INIT_WORK(&priv->tx_flush, iwl_bg_tx_flush);
2841 INIT_WORK(&priv->bt_full_concurrency, iwl_bg_bt_full_concurrency);
2842 INIT_WORK(&priv->bt_runtime_config, iwl_bg_bt_runtime_config);
2843 INIT_DELAYED_WORK(&priv->_agn.hw_roc_work, iwlagn_bg_roc_done);
2844
2845 iwl_setup_scan_deferred_work(priv);
2846
2847 if (priv->cfg->lib->setup_deferred_work)
2848 priv->cfg->lib->setup_deferred_work(priv);
2849
2850 init_timer(&priv->statistics_periodic);
2851 priv->statistics_periodic.data = (unsigned long)priv;
2852 priv->statistics_periodic.function = iwl_bg_statistics_periodic;
2853
2854 init_timer(&priv->ucode_trace);
2855 priv->ucode_trace.data = (unsigned long)priv;
2856 priv->ucode_trace.function = iwl_bg_ucode_trace;
2857
2858 init_timer(&priv->watchdog);
2859 priv->watchdog.data = (unsigned long)priv;
2860 priv->watchdog.function = iwl_bg_watchdog;
2861 }
2862
2863 static void iwl_cancel_deferred_work(struct iwl_priv *priv)
2864 {
2865 if (priv->cfg->lib->cancel_deferred_work)
2866 priv->cfg->lib->cancel_deferred_work(priv);
2867
2868 cancel_work_sync(&priv->run_time_calib_work);
2869 cancel_work_sync(&priv->beacon_update);
2870
2871 iwl_cancel_scan_deferred_work(priv);
2872
2873 cancel_work_sync(&priv->bt_full_concurrency);
2874 cancel_work_sync(&priv->bt_runtime_config);
2875
2876 del_timer_sync(&priv->statistics_periodic);
2877 del_timer_sync(&priv->ucode_trace);
2878 }
2879
2880 static void iwl_init_hw_rates(struct iwl_priv *priv,
2881 struct ieee80211_rate *rates)
2882 {
2883 int i;
2884
2885 for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) {
2886 rates[i].bitrate = iwl_rates[i].ieee * 5;
2887 rates[i].hw_value = i; /* Rate scaling will work on indexes */
2888 rates[i].hw_value_short = i;
2889 rates[i].flags = 0;
2890 if ((i >= IWL_FIRST_CCK_RATE) && (i <= IWL_LAST_CCK_RATE)) {
2891 /*
2892 * If CCK != 1M then set short preamble rate flag.
2893 */
2894 rates[i].flags |=
2895 (iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ?
2896 0 : IEEE80211_RATE_SHORT_PREAMBLE;
2897 }
2898 }
2899 }
2900
2901 static int iwl_init_drv(struct iwl_priv *priv)
2902 {
2903 int ret;
2904
2905 spin_lock_init(&priv->sta_lock);
2906 spin_lock_init(&priv->hcmd_lock);
2907
2908 mutex_init(&priv->mutex);
2909
2910 priv->ieee_channels = NULL;
2911 priv->ieee_rates = NULL;
2912 priv->band = IEEE80211_BAND_2GHZ;
2913
2914 priv->iw_mode = NL80211_IFTYPE_STATION;
2915 priv->current_ht_config.smps = IEEE80211_SMPS_STATIC;
2916 priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF;
2917 priv->_agn.agg_tids_count = 0;
2918
2919 /* initialize force reset */
2920 priv->force_reset[IWL_RF_RESET].reset_duration =
2921 IWL_DELAY_NEXT_FORCE_RF_RESET;
2922 priv->force_reset[IWL_FW_RESET].reset_duration =
2923 IWL_DELAY_NEXT_FORCE_FW_RELOAD;
2924
2925 priv->rx_statistics_jiffies = jiffies;
2926
2927 /* Choose which receivers/antennas to use */
2928 iwlagn_set_rxon_chain(priv, &priv->contexts[IWL_RXON_CTX_BSS]);
2929
2930 iwl_init_scan_params(priv);
2931
2932 /* init bt coex */
2933 if (priv->cfg->bt_params &&
2934 priv->cfg->bt_params->advanced_bt_coexist) {
2935 priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT;
2936 priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT;
2937 priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK;
2938 priv->bt_on_thresh = BT_ON_THRESHOLD_DEF;
2939 priv->bt_duration = BT_DURATION_LIMIT_DEF;
2940 priv->dynamic_frag_thresh = BT_FRAG_THRESHOLD_DEF;
2941 }
2942
2943 ret = iwl_init_channel_map(priv);
2944 if (ret) {
2945 IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
2946 goto err;
2947 }
2948
2949 ret = iwlcore_init_geos(priv);
2950 if (ret) {
2951 IWL_ERR(priv, "initializing geos failed: %d\n", ret);
2952 goto err_free_channel_map;
2953 }
2954 iwl_init_hw_rates(priv, priv->ieee_rates);
2955
2956 return 0;
2957
2958 err_free_channel_map:
2959 iwl_free_channel_map(priv);
2960 err:
2961 return ret;
2962 }
2963
2964 static void iwl_uninit_drv(struct iwl_priv *priv)
2965 {
2966 iwl_calib_free_results(priv);
2967 iwlcore_free_geos(priv);
2968 iwl_free_channel_map(priv);
2969 kfree(priv->scan_cmd);
2970 kfree(priv->beacon_cmd);
2971 }
2972
2973 static void iwl_mac_rssi_callback(struct ieee80211_hw *hw,
2974 enum ieee80211_rssi_event rssi_event)
2975 {
2976 struct iwl_priv *priv = hw->priv;
2977
2978 mutex_lock(&priv->mutex);
2979
2980 if (priv->cfg->bt_params &&
2981 priv->cfg->bt_params->advanced_bt_coexist) {
2982 if (rssi_event == RSSI_EVENT_LOW)
2983 priv->bt_enable_pspoll = true;
2984 else if (rssi_event == RSSI_EVENT_HIGH)
2985 priv->bt_enable_pspoll = false;
2986
2987 iwlagn_send_advance_bt_config(priv);
2988 } else {
2989 IWL_DEBUG_MAC80211(priv, "Advanced BT coex disabled,"
2990 "ignoring RSSI callback\n");
2991 }
2992
2993 mutex_unlock(&priv->mutex);
2994 }
2995
2996 struct ieee80211_ops iwlagn_hw_ops = {
2997 .tx = iwlagn_mac_tx,
2998 .start = iwlagn_mac_start,
2999 .stop = iwlagn_mac_stop,
3000 .add_interface = iwl_mac_add_interface,
3001 .remove_interface = iwl_mac_remove_interface,
3002 .change_interface = iwl_mac_change_interface,
3003 .config = iwlagn_mac_config,
3004 .configure_filter = iwlagn_configure_filter,
3005 .set_key = iwlagn_mac_set_key,
3006 .update_tkip_key = iwlagn_mac_update_tkip_key,
3007 .conf_tx = iwl_mac_conf_tx,
3008 .bss_info_changed = iwlagn_bss_info_changed,
3009 .ampdu_action = iwlagn_mac_ampdu_action,
3010 .hw_scan = iwl_mac_hw_scan,
3011 .sta_notify = iwlagn_mac_sta_notify,
3012 .sta_add = iwlagn_mac_sta_add,
3013 .sta_remove = iwl_mac_sta_remove,
3014 .channel_switch = iwlagn_mac_channel_switch,
3015 .flush = iwlagn_mac_flush,
3016 .tx_last_beacon = iwl_mac_tx_last_beacon,
3017 .remain_on_channel = iwl_mac_remain_on_channel,
3018 .cancel_remain_on_channel = iwl_mac_cancel_remain_on_channel,
3019 .offchannel_tx = iwl_mac_offchannel_tx,
3020 .offchannel_tx_cancel_wait = iwl_mac_offchannel_tx_cancel_wait,
3021 .rssi_callback = iwl_mac_rssi_callback,
3022 CFG80211_TESTMODE_CMD(iwl_testmode_cmd)
3023 CFG80211_TESTMODE_DUMP(iwl_testmode_dump)
3024 };
3025
3026 static u32 iwl_hw_detect(struct iwl_priv *priv)
3027 {
3028 return iwl_read32(priv, CSR_HW_REV);
3029 }
3030
3031 static int iwl_set_hw_params(struct iwl_priv *priv)
3032 {
3033 priv->hw_params.max_rxq_size = RX_QUEUE_SIZE;
3034 priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
3035 if (iwlagn_mod_params.amsdu_size_8K)
3036 priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_8K);
3037 else
3038 priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_4K);
3039
3040 priv->hw_params.max_beacon_itrvl = IWL_MAX_UCODE_BEACON_INTERVAL;
3041
3042 if (iwlagn_mod_params.disable_11n)
3043 priv->cfg->sku &= ~EEPROM_SKU_CAP_11N_ENABLE;
3044
3045 /* Device-specific setup */
3046 return priv->cfg->lib->set_hw_params(priv);
3047 }
3048
3049 static const u8 iwlagn_bss_ac_to_fifo[] = {
3050 IWL_TX_FIFO_VO,
3051 IWL_TX_FIFO_VI,
3052 IWL_TX_FIFO_BE,
3053 IWL_TX_FIFO_BK,
3054 };
3055
3056 static const u8 iwlagn_bss_ac_to_queue[] = {
3057 0, 1, 2, 3,
3058 };
3059
3060 static const u8 iwlagn_pan_ac_to_fifo[] = {
3061 IWL_TX_FIFO_VO_IPAN,
3062 IWL_TX_FIFO_VI_IPAN,
3063 IWL_TX_FIFO_BE_IPAN,
3064 IWL_TX_FIFO_BK_IPAN,
3065 };
3066
3067 static const u8 iwlagn_pan_ac_to_queue[] = {
3068 7, 6, 5, 4,
3069 };
3070
3071 /* This function both allocates and initializes hw and priv. */
3072 static struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg)
3073 {
3074 struct iwl_priv *priv;
3075 /* mac80211 allocates memory for this device instance, including
3076 * space for this driver's private structure */
3077 struct ieee80211_hw *hw;
3078
3079 hw = ieee80211_alloc_hw(sizeof(struct iwl_priv), &iwlagn_hw_ops);
3080 if (hw == NULL) {
3081 pr_err("%s: Can not allocate network device\n",
3082 cfg->name);
3083 goto out;
3084 }
3085
3086 priv = hw->priv;
3087 priv->hw = hw;
3088
3089 out:
3090 return hw;
3091 }
3092
3093 static void iwl_init_context(struct iwl_priv *priv)
3094 {
3095 int i;
3096
3097 /*
3098 * The default context is always valid,
3099 * more may be discovered when firmware
3100 * is loaded.
3101 */
3102 priv->valid_contexts = BIT(IWL_RXON_CTX_BSS);
3103
3104 for (i = 0; i < NUM_IWL_RXON_CTX; i++)
3105 priv->contexts[i].ctxid = i;
3106
3107 priv->contexts[IWL_RXON_CTX_BSS].always_active = true;
3108 priv->contexts[IWL_RXON_CTX_BSS].is_active = true;
3109 priv->contexts[IWL_RXON_CTX_BSS].rxon_cmd = REPLY_RXON;
3110 priv->contexts[IWL_RXON_CTX_BSS].rxon_timing_cmd = REPLY_RXON_TIMING;
3111 priv->contexts[IWL_RXON_CTX_BSS].rxon_assoc_cmd = REPLY_RXON_ASSOC;
3112 priv->contexts[IWL_RXON_CTX_BSS].qos_cmd = REPLY_QOS_PARAM;
3113 priv->contexts[IWL_RXON_CTX_BSS].ap_sta_id = IWL_AP_ID;
3114 priv->contexts[IWL_RXON_CTX_BSS].wep_key_cmd = REPLY_WEPKEY;
3115 priv->contexts[IWL_RXON_CTX_BSS].ac_to_fifo = iwlagn_bss_ac_to_fifo;
3116 priv->contexts[IWL_RXON_CTX_BSS].ac_to_queue = iwlagn_bss_ac_to_queue;
3117 priv->contexts[IWL_RXON_CTX_BSS].exclusive_interface_modes =
3118 BIT(NL80211_IFTYPE_ADHOC);
3119 priv->contexts[IWL_RXON_CTX_BSS].interface_modes =
3120 BIT(NL80211_IFTYPE_STATION);
3121 priv->contexts[IWL_RXON_CTX_BSS].ap_devtype = RXON_DEV_TYPE_AP;
3122 priv->contexts[IWL_RXON_CTX_BSS].ibss_devtype = RXON_DEV_TYPE_IBSS;
3123 priv->contexts[IWL_RXON_CTX_BSS].station_devtype = RXON_DEV_TYPE_ESS;
3124 priv->contexts[IWL_RXON_CTX_BSS].unused_devtype = RXON_DEV_TYPE_ESS;
3125
3126 priv->contexts[IWL_RXON_CTX_PAN].rxon_cmd = REPLY_WIPAN_RXON;
3127 priv->contexts[IWL_RXON_CTX_PAN].rxon_timing_cmd =
3128 REPLY_WIPAN_RXON_TIMING;
3129 priv->contexts[IWL_RXON_CTX_PAN].rxon_assoc_cmd =
3130 REPLY_WIPAN_RXON_ASSOC;
3131 priv->contexts[IWL_RXON_CTX_PAN].qos_cmd = REPLY_WIPAN_QOS_PARAM;
3132 priv->contexts[IWL_RXON_CTX_PAN].ap_sta_id = IWL_AP_ID_PAN;
3133 priv->contexts[IWL_RXON_CTX_PAN].wep_key_cmd = REPLY_WIPAN_WEPKEY;
3134 priv->contexts[IWL_RXON_CTX_PAN].bcast_sta_id = IWLAGN_PAN_BCAST_ID;
3135 priv->contexts[IWL_RXON_CTX_PAN].station_flags = STA_FLG_PAN_STATION;
3136 priv->contexts[IWL_RXON_CTX_PAN].ac_to_fifo = iwlagn_pan_ac_to_fifo;
3137 priv->contexts[IWL_RXON_CTX_PAN].ac_to_queue = iwlagn_pan_ac_to_queue;
3138 priv->contexts[IWL_RXON_CTX_PAN].mcast_queue = IWL_IPAN_MCAST_QUEUE;
3139 priv->contexts[IWL_RXON_CTX_PAN].interface_modes =
3140 BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP);
3141 #ifdef CONFIG_IWL_P2P
3142 priv->contexts[IWL_RXON_CTX_PAN].interface_modes |=
3143 BIT(NL80211_IFTYPE_P2P_CLIENT) | BIT(NL80211_IFTYPE_P2P_GO);
3144 #endif
3145 priv->contexts[IWL_RXON_CTX_PAN].ap_devtype = RXON_DEV_TYPE_CP;
3146 priv->contexts[IWL_RXON_CTX_PAN].station_devtype = RXON_DEV_TYPE_2STA;
3147 priv->contexts[IWL_RXON_CTX_PAN].unused_devtype = RXON_DEV_TYPE_P2P;
3148
3149 BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
3150 }
3151
3152 int iwl_probe(void *bus_specific, struct iwl_bus_ops *bus_ops,
3153 struct iwl_cfg *cfg)
3154 {
3155 int err = 0;
3156 struct iwl_priv *priv;
3157 struct ieee80211_hw *hw;
3158 u16 num_mac;
3159 u32 hw_rev;
3160
3161 /************************
3162 * 1. Allocating HW data
3163 ************************/
3164 hw = iwl_alloc_all(cfg);
3165 if (!hw) {
3166 err = -ENOMEM;
3167 goto out;
3168 }
3169
3170 priv = hw->priv;
3171
3172 priv->bus.priv = priv;
3173 priv->bus.bus_specific = bus_specific;
3174 priv->bus.ops = bus_ops;
3175 priv->bus.irq = priv->bus.ops->get_irq(&priv->bus);
3176 priv->bus.ops->set_drv_data(&priv->bus, priv);
3177 priv->bus.dev = priv->bus.ops->get_dev(&priv->bus);
3178
3179 /* At this point both hw and priv are allocated. */
3180
3181 SET_IEEE80211_DEV(hw, priv->bus.dev);
3182
3183 IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n");
3184 priv->cfg = cfg;
3185 priv->inta_mask = CSR_INI_SET_MASK;
3186
3187 err = iwl_trans_register(priv);
3188 if (err)
3189 goto out_free_priv;
3190
3191 /* is antenna coupling more than 35dB ? */
3192 priv->bt_ant_couple_ok =
3193 (iwlagn_ant_coupling > IWL_BT_ANTENNA_COUPLING_THRESHOLD) ?
3194 true : false;
3195
3196 /* enable/disable bt channel inhibition */
3197 priv->bt_ch_announce = iwlagn_bt_ch_announce;
3198 IWL_DEBUG_INFO(priv, "BT channel inhibition is %s\n",
3199 (priv->bt_ch_announce) ? "On" : "Off");
3200
3201 if (iwl_alloc_traffic_mem(priv))
3202 IWL_ERR(priv, "Not enough memory to generate traffic log\n");
3203
3204
3205 /* these spin locks will be used in apm_ops.init and EEPROM access
3206 * we should init now
3207 */
3208 spin_lock_init(&priv->reg_lock);
3209 spin_lock_init(&priv->lock);
3210
3211 /*
3212 * stop and reset the on-board processor just in case it is in a
3213 * strange state ... like being left stranded by a primary kernel
3214 * and this is now the kdump kernel trying to start up
3215 */
3216 iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
3217
3218 /***********************
3219 * 3. Read REV register
3220 ***********************/
3221 hw_rev = iwl_hw_detect(priv);
3222 IWL_INFO(priv, "Detected %s, REV=0x%X\n",
3223 priv->cfg->name, hw_rev);
3224
3225 if (iwl_prepare_card_hw(priv)) {
3226 err = -EIO;
3227 IWL_WARN(priv, "Failed, HW not ready\n");
3228 goto out_free_traffic_mem;
3229 }
3230
3231 /*****************
3232 * 4. Read EEPROM
3233 *****************/
3234 /* Read the EEPROM */
3235 err = iwl_eeprom_init(priv, hw_rev);
3236 if (err) {
3237 IWL_ERR(priv, "Unable to init EEPROM\n");
3238 goto out_free_traffic_mem;
3239 }
3240 err = iwl_eeprom_check_version(priv);
3241 if (err)
3242 goto out_free_eeprom;
3243
3244 err = iwl_eeprom_check_sku(priv);
3245 if (err)
3246 goto out_free_eeprom;
3247
3248 /* extract MAC Address */
3249 iwl_eeprom_get_mac(priv, priv->addresses[0].addr);
3250 IWL_DEBUG_INFO(priv, "MAC address: %pM\n", priv->addresses[0].addr);
3251 priv->hw->wiphy->addresses = priv->addresses;
3252 priv->hw->wiphy->n_addresses = 1;
3253 num_mac = iwl_eeprom_query16(priv, EEPROM_NUM_MAC_ADDRESS);
3254 if (num_mac > 1) {
3255 memcpy(priv->addresses[1].addr, priv->addresses[0].addr,
3256 ETH_ALEN);
3257 priv->addresses[1].addr[5]++;
3258 priv->hw->wiphy->n_addresses++;
3259 }
3260
3261 /* initialize all valid contexts */
3262 iwl_init_context(priv);
3263
3264 /************************
3265 * 5. Setup HW constants
3266 ************************/
3267 if (iwl_set_hw_params(priv)) {
3268 err = -ENOENT;
3269 IWL_ERR(priv, "failed to set hw parameters\n");
3270 goto out_free_eeprom;
3271 }
3272
3273 /*******************
3274 * 6. Setup priv
3275 *******************/
3276
3277 err = iwl_init_drv(priv);
3278 if (err)
3279 goto out_free_eeprom;
3280 /* At this point both hw and priv are initialized. */
3281
3282 /********************
3283 * 7. Setup services
3284 ********************/
3285 iwl_setup_deferred_work(priv);
3286 iwl_setup_rx_handlers(priv);
3287 iwl_testmode_init(priv);
3288
3289 /*********************************************
3290 * 8. Enable interrupts
3291 *********************************************/
3292
3293 iwl_enable_rfkill_int(priv);
3294
3295 /* If platform's RF_KILL switch is NOT set to KILL */
3296 if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
3297 clear_bit(STATUS_RF_KILL_HW, &priv->status);
3298 else
3299 set_bit(STATUS_RF_KILL_HW, &priv->status);
3300
3301 wiphy_rfkill_set_hw_state(priv->hw->wiphy,
3302 test_bit(STATUS_RF_KILL_HW, &priv->status));
3303
3304 iwl_power_initialize(priv);
3305 iwl_tt_initialize(priv);
3306
3307 init_completion(&priv->_agn.firmware_loading_complete);
3308
3309 err = iwl_request_firmware(priv, true);
3310 if (err)
3311 goto out_destroy_workqueue;
3312
3313 return 0;
3314
3315 out_destroy_workqueue:
3316 destroy_workqueue(priv->workqueue);
3317 priv->workqueue = NULL;
3318 iwl_uninit_drv(priv);
3319 out_free_eeprom:
3320 iwl_eeprom_free(priv);
3321 out_free_traffic_mem:
3322 iwl_free_traffic_mem(priv);
3323 trans_free(priv);
3324 out_free_priv:
3325 ieee80211_free_hw(priv->hw);
3326 out:
3327 return err;
3328 }
3329
3330 void __devexit iwl_remove(struct iwl_priv * priv)
3331 {
3332 unsigned long flags;
3333
3334 wait_for_completion(&priv->_agn.firmware_loading_complete);
3335
3336 IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n");
3337
3338 iwl_dbgfs_unregister(priv);
3339 sysfs_remove_group(&priv->bus.dev->kobj,
3340 &iwl_attribute_group);
3341
3342 /* ieee80211_unregister_hw call wil cause iwl_mac_stop to
3343 * to be called and iwl_down since we are removing the device
3344 * we need to set STATUS_EXIT_PENDING bit.
3345 */
3346 set_bit(STATUS_EXIT_PENDING, &priv->status);
3347
3348 iwl_testmode_cleanup(priv);
3349 iwl_leds_exit(priv);
3350
3351 if (priv->mac80211_registered) {
3352 ieee80211_unregister_hw(priv->hw);
3353 priv->mac80211_registered = 0;
3354 }
3355
3356 /* Reset to low power before unloading driver. */
3357 iwl_apm_stop(priv);
3358
3359 iwl_tt_exit(priv);
3360
3361 /* make sure we flush any pending irq or
3362 * tasklet for the driver
3363 */
3364 spin_lock_irqsave(&priv->lock, flags);
3365 iwl_disable_interrupts(priv);
3366 spin_unlock_irqrestore(&priv->lock, flags);
3367
3368 trans_sync_irq(priv);
3369
3370 iwl_dealloc_ucode(priv);
3371
3372 trans_rx_free(priv);
3373 trans_tx_free(priv);
3374
3375 iwl_eeprom_free(priv);
3376
3377 /*netif_stop_queue(dev); */
3378 flush_workqueue(priv->workqueue);
3379
3380 /* ieee80211_unregister_hw calls iwl_mac_stop, which flushes
3381 * priv->workqueue... so we can't take down the workqueue
3382 * until now... */
3383 destroy_workqueue(priv->workqueue);
3384 priv->workqueue = NULL;
3385 iwl_free_traffic_mem(priv);
3386
3387 trans_free(priv);
3388
3389 priv->bus.ops->set_drv_data(&priv->bus, NULL);
3390
3391 iwl_uninit_drv(priv);
3392
3393 dev_kfree_skb(priv->beacon_skb);
3394
3395 ieee80211_free_hw(priv->hw);
3396 }
3397
3398
3399 /*****************************************************************************
3400 *
3401 * driver and module entry point
3402 *
3403 *****************************************************************************/
3404 static int __init iwl_init(void)
3405 {
3406
3407 int ret;
3408 pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
3409 pr_info(DRV_COPYRIGHT "\n");
3410
3411 ret = iwlagn_rate_control_register();
3412 if (ret) {
3413 pr_err("Unable to register rate control algorithm: %d\n", ret);
3414 return ret;
3415 }
3416
3417 ret = iwl_pci_register_driver();
3418
3419 if (ret)
3420 goto error_register;
3421 return ret;
3422
3423 error_register:
3424 iwlagn_rate_control_unregister();
3425 return ret;
3426 }
3427
3428 static void __exit iwl_exit(void)
3429 {
3430 iwl_pci_unregister_driver();
3431 iwlagn_rate_control_unregister();
3432 }
3433
3434 module_exit(iwl_exit);
3435 module_init(iwl_init);
3436
3437 #ifdef CONFIG_IWLWIFI_DEBUG
3438 module_param_named(debug, iwl_debug_level, uint, S_IRUGO | S_IWUSR);
3439 MODULE_PARM_DESC(debug, "debug output mask");
3440 #endif
3441
3442 module_param_named(swcrypto, iwlagn_mod_params.sw_crypto, int, S_IRUGO);
3443 MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
3444 module_param_named(queues_num, iwlagn_mod_params.num_of_queues, int, S_IRUGO);
3445 MODULE_PARM_DESC(queues_num, "number of hw queues.");
3446 module_param_named(11n_disable, iwlagn_mod_params.disable_11n, int, S_IRUGO);
3447 MODULE_PARM_DESC(11n_disable, "disable 11n functionality");
3448 module_param_named(amsdu_size_8K, iwlagn_mod_params.amsdu_size_8K,
3449 int, S_IRUGO);
3450 MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
3451 module_param_named(fw_restart, iwlagn_mod_params.restart_fw, int, S_IRUGO);
3452 MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
3453
3454 module_param_named(ucode_alternative, iwlagn_wanted_ucode_alternative, int,
3455 S_IRUGO);
3456 MODULE_PARM_DESC(ucode_alternative,
3457 "specify ucode alternative to use from ucode file");
3458
3459 module_param_named(antenna_coupling, iwlagn_ant_coupling, int, S_IRUGO);
3460 MODULE_PARM_DESC(antenna_coupling,
3461 "specify antenna coupling in dB (defualt: 0 dB)");
3462
3463 module_param_named(bt_ch_inhibition, iwlagn_bt_ch_announce, bool, S_IRUGO);
3464 MODULE_PARM_DESC(bt_ch_inhibition,
3465 "Disable BT channel inhibition (default: enable)");
3466
3467 module_param_named(plcp_check, iwlagn_mod_params.plcp_check, bool, S_IRUGO);
3468 MODULE_PARM_DESC(plcp_check, "Check plcp health (default: 1 [enabled])");
3469
3470 module_param_named(ack_check, iwlagn_mod_params.ack_check, bool, S_IRUGO);
3471 MODULE_PARM_DESC(ack_check, "Check ack health (default: 0 [disabled])");
3472
3473 module_param_named(wd_disable, iwlagn_mod_params.wd_disable, bool, S_IRUGO);
3474 MODULE_PARM_DESC(wd_disable,
3475 "Disable stuck queue watchdog timer (default: 0 [enabled])");
3476
3477 /*
3478 * set bt_coex_active to true, uCode will do kill/defer
3479 * every time the priority line is asserted (BT is sending signals on the
3480 * priority line in the PCIx).
3481 * set bt_coex_active to false, uCode will ignore the BT activity and
3482 * perform the normal operation
3483 *
3484 * User might experience transmit issue on some platform due to WiFi/BT
3485 * co-exist problem. The possible behaviors are:
3486 * Able to scan and finding all the available AP
3487 * Not able to associate with any AP
3488 * On those platforms, WiFi communication can be restored by set
3489 * "bt_coex_active" module parameter to "false"
3490 *
3491 * default: bt_coex_active = true (BT_COEX_ENABLE)
3492 */
3493 module_param_named(bt_coex_active, iwlagn_mod_params.bt_coex_active,
3494 bool, S_IRUGO);
3495 MODULE_PARM_DESC(bt_coex_active, "enable wifi/bt co-exist (default: enable)");
3496
3497 module_param_named(led_mode, iwlagn_mod_params.led_mode, int, S_IRUGO);
3498 MODULE_PARM_DESC(led_mode, "0=system default, "
3499 "1=On(RF On)/Off(RF Off), 2=blinking (default: 0)");
3500
3501 module_param_named(power_save, iwlagn_mod_params.power_save,
3502 bool, S_IRUGO);
3503 MODULE_PARM_DESC(power_save,
3504 "enable WiFi power management (default: disable)");
3505
3506 module_param_named(power_level, iwlagn_mod_params.power_level,
3507 int, S_IRUGO);
3508 MODULE_PARM_DESC(power_level,
3509 "default power save level (range from 1 - 5, default: 1)");
3510
3511 /*
3512 * For now, keep using power level 1 instead of automatically
3513 * adjusting ...
3514 */
3515 module_param_named(no_sleep_autoadjust, iwlagn_mod_params.no_sleep_autoadjust,
3516 bool, S_IRUGO);
3517 MODULE_PARM_DESC(no_sleep_autoadjust,
3518 "don't automatically adjust sleep level "
3519 "according to maximum network latency (default: true)");
This page took 0.104747 seconds and 6 git commands to generate.