1 /******************************************************************************
3 * This file is provided under a dual BSD/GPLv2 license. When using or
4 * redistributing this file, you may do so under either license.
8 * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of version 2 of the GNU General Public License as
12 * published by the Free Software Foundation.
14 * This program is distributed in the hope that it will be useful, but
15 * WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
17 * General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
24 * The full GNU General Public License is included in this distribution
25 * in the file called LICENSE.GPL.
27 * Contact Information:
28 * Intel Linux Wireless <ilw@linux.intel.com>
29 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
33 * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved.
34 * All rights reserved.
36 * Redistribution and use in source and binary forms, with or without
37 * modification, are permitted provided that the following conditions
40 * * Redistributions of source code must retain the above copyright
41 * notice, this list of conditions and the following disclaimer.
42 * * Redistributions in binary form must reproduce the above copyright
43 * notice, this list of conditions and the following disclaimer in
44 * the documentation and/or other materials provided with the
46 * * Neither the name Intel Corporation nor the names of its
47 * contributors may be used to endorse or promote products derived
48 * from this software without specific prior written permission.
50 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
51 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
52 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
53 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
54 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
55 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
56 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
57 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
58 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
59 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
60 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
62 *****************************************************************************/
63 #ifndef __IWL_CONFIG_H__
64 #define __IWL_CONFIG_H__
66 #include <linux/types.h>
67 #include <net/mac80211.h>
70 enum iwl_device_family
{
71 IWL_DEVICE_FAMILY_UNDEFINED
,
72 IWL_DEVICE_FAMILY_1000
,
73 IWL_DEVICE_FAMILY_100
,
74 IWL_DEVICE_FAMILY_2000
,
75 IWL_DEVICE_FAMILY_2030
,
76 IWL_DEVICE_FAMILY_105
,
77 IWL_DEVICE_FAMILY_135
,
78 IWL_DEVICE_FAMILY_5000
,
79 IWL_DEVICE_FAMILY_5150
,
80 IWL_DEVICE_FAMILY_6000
,
81 IWL_DEVICE_FAMILY_6000i
,
82 IWL_DEVICE_FAMILY_6005
,
83 IWL_DEVICE_FAMILY_6030
,
84 IWL_DEVICE_FAMILY_6050
,
85 IWL_DEVICE_FAMILY_6150
,
90 * IWL_LED_DEFAULT: use device default
91 * IWL_LED_RF_STATE: turn LED on/off based on RF state
94 * IWL_LED_BLINK: adjust led blink rate based on blink table
95 * IWL_LED_DISABLE: led disabled
105 * This is the threshold value of plcp error rate per 100mSecs. It is
106 * used to set and check for the validity of plcp_delta.
108 #define IWL_MAX_PLCP_ERR_THRESHOLD_MIN 1
109 #define IWL_MAX_PLCP_ERR_THRESHOLD_DEF 50
110 #define IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF 100
111 #define IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF 200
112 #define IWL_MAX_PLCP_ERR_THRESHOLD_MAX 255
113 #define IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE 0
115 /* TX queue watchdog timeouts in mSecs */
116 #define IWL_WATCHDOG_DISABLED 0
117 #define IWL_DEF_WD_TIMEOUT 2000
118 #define IWL_LONG_WD_TIMEOUT 10000
119 #define IWL_MAX_WD_TIMEOUT 120000
121 /* Antenna presence definitions */
126 #define ANT_AB (ANT_A | ANT_B)
127 #define ANT_AC (ANT_A | ANT_C)
128 #define ANT_BC (ANT_B | ANT_C)
129 #define ANT_ABC (ANT_A | ANT_B | ANT_C)
133 * @max_ll_items: max number of OTP blocks
134 * @shadow_ram_support: shadow support for OTP memory
135 * @led_compensation: compensate on the led on/off time per HW according
136 * to the deviation to achieve the desired led frequency.
137 * The detail algorithm is described in iwl-led.c
138 * @chain_noise_num_beacons: number of beacons used to compute chain noise
139 * @adv_thermal_throttle: support advance thermal throttle
140 * @support_ct_kill_exit: support ct kill exit condition
141 * @plcp_delta_threshold: plcp error rate threshold used to trigger
142 * radio tuning when there is a high receiving plcp error rate
143 * @chain_noise_scale: default chain noise scale used for gain computation
144 * @wd_timeout: TX queues watchdog timeout
145 * @max_event_log_size: size of event log buffer size for ucode event logging
146 * @shadow_reg_enable: HW shadow register support
147 * @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up
148 * @no_idle_support: do not support idle mode
150 struct iwl_base_params
{
152 int num_of_queues
; /* def: HW dependent */
153 /* for iwl_apm_init() */
156 const u16 max_ll_items
;
157 const bool shadow_ram_support
;
158 u16 led_compensation
;
159 bool adv_thermal_throttle
;
160 bool support_ct_kill_exit
;
161 u8 plcp_delta_threshold
;
162 s32 chain_noise_scale
;
163 unsigned int wd_timeout
;
164 u32 max_event_log_size
;
165 const bool shadow_reg_enable
;
167 const bool no_idle_support
;
171 * @advanced_bt_coexist: support advanced bt coexist
172 * @bt_init_traffic_load: specify initial bt traffic load
173 * @bt_prio_boost: default bt priority boost value
174 * @agg_time_limit: maximum number of uSec in aggregation
175 * @bt_sco_disable: uCode should not response to BT in SCO/ESCO mode
177 struct iwl_bt_params
{
178 bool advanced_bt_coexist
;
179 u8 bt_init_traffic_load
;
187 * @use_rts_for_aggregation: use rts/cts protection for HT traffic
188 * @ht40_bands: bitmap of bands (using %IEEE80211_BAND_*) that support HT40
190 struct iwl_ht_params
{
191 enum ieee80211_smps_mode smps_mode
;
192 const bool ht_greenfield_support
; /* if used set to true */
193 bool use_rts_for_aggregation
;
198 * information on how to parse the EEPROM
200 #define EEPROM_REG_BAND_1_CHANNELS 0x08
201 #define EEPROM_REG_BAND_2_CHANNELS 0x26
202 #define EEPROM_REG_BAND_3_CHANNELS 0x42
203 #define EEPROM_REG_BAND_4_CHANNELS 0x5C
204 #define EEPROM_REG_BAND_5_CHANNELS 0x74
205 #define EEPROM_REG_BAND_24_HT40_CHANNELS 0x82
206 #define EEPROM_REG_BAND_52_HT40_CHANNELS 0x92
207 #define EEPROM_6000_REG_BAND_24_HT40_CHANNELS 0x80
208 #define EEPROM_REGULATORY_BAND_NO_HT40 0
210 struct iwl_eeprom_params
{
211 const u8 regulatory_bands
[7];
212 bool enhanced_txpower
;
217 * @name: Offical name of the device
218 * @fw_name_pre: Firmware filename prefix. The api version and extension
219 * (.ucode) will be added to filename before loading from disk. The
220 * filename is constructed as fw_name_pre<api>.ucode.
221 * @ucode_api_max: Highest version of uCode API supported by driver.
222 * @ucode_api_ok: oldest version of the uCode API that is OK to load
223 * without a warning, for use in transitions
224 * @ucode_api_min: Lowest version of uCode API supported by driver.
225 * @max_inst_size: The maximal length of the fw inst section
226 * @max_data_size: The maximal length of the fw data section
227 * @valid_tx_ant: valid transmit antenna
228 * @valid_rx_ant: valid receive antenna
229 * @eeprom_ver: EEPROM version
230 * @eeprom_calib_ver: EEPROM calibration version
231 * @lib: pointer to the lib ops
232 * @base_params: pointer to basic parameters
233 * @ht_params: point to ht patameters
234 * @bt_params: pointer to bt parameters
235 * @need_temp_offset_calib: need to perform temperature offset calibration
236 * @no_xtal_calib: some devices do not need crystal calibration data,
237 * don't send it to those
238 * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
239 * @adv_pm: advance power management
240 * @rx_with_siso_diversity: 1x1 device with rx antenna diversity
241 * @internal_wimax_coex: internal wifi/wimax combo device
242 * @temp_offset_v2: support v2 of temperature offset calibration
244 * We enable the driver to be backward compatible wrt. hardware features.
245 * API differences in uCode shouldn't be handled here but through TLVs
246 * and/or the uCode API version instead.
249 /* params specific to an individual device within a device family */
251 const char *fw_name_pre
;
252 const unsigned int ucode_api_max
;
253 const unsigned int ucode_api_ok
;
254 const unsigned int ucode_api_min
;
255 const enum iwl_device_family device_family
;
256 const u32 max_data_size
;
257 const u32 max_inst_size
;
261 u16 eeprom_calib_ver
;
262 /* params not likely to change within a device family */
263 const struct iwl_base_params
*base_params
;
264 /* params likely to change within a device family */
265 const struct iwl_ht_params
*ht_params
;
266 const struct iwl_bt_params
*bt_params
;
267 const struct iwl_eeprom_params
*eeprom_params
;
268 const bool need_temp_offset_calib
; /* if used set to true */
269 const bool no_xtal_calib
;
270 enum iwl_led_mode led_mode
;
272 const bool rx_with_siso_diversity
;
273 const bool internal_wimax_coex
;
274 const bool temp_offset_v2
;
277 #endif /* __IWL_CONFIG_H__ */