1 /******************************************************************************
5 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of version 2 of the GNU General Public License as
9 * published by the Free Software Foundation.
11 * This program is distributed in the hope that it will be useful, but
12 * WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 * General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
21 * The full GNU General Public License is included in this distribution
22 * in the file called LICENSE.GPL.
24 * Contact Information:
25 * Intel Linux Wireless <ilw@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27 *****************************************************************************/
29 #include <linux/kernel.h>
30 #include <linux/module.h>
31 #include <linux/etherdevice.h>
32 #include <linux/sched.h>
33 #include <linux/slab.h>
34 #include <net/mac80211.h>
36 #include "iwl-eeprom.h"
37 #include "iwl-dev.h" /* FIXME: remove */
38 #include "iwl-debug.h"
41 #include "iwl-power.h"
43 #include "iwl-helpers.h"
47 * set bt_coex_active to true, uCode will do kill/defer
48 * every time the priority line is asserted (BT is sending signals on the
49 * priority line in the PCIx).
50 * set bt_coex_active to false, uCode will ignore the BT activity and
51 * perform the normal operation
53 * User might experience transmit issue on some platform due to WiFi/BT
54 * co-exist problem. The possible behaviors are:
55 * Able to scan and finding all the available AP
56 * Not able to associate with any AP
57 * On those platforms, WiFi communication can be restored by set
58 * "bt_coex_active" module parameter to "false"
60 * default: bt_coex_active = true (BT_COEX_ENABLE)
62 bool bt_coex_active
= true;
63 module_param(bt_coex_active
, bool, S_IRUGO
);
64 MODULE_PARM_DESC(bt_coex_active
, "enable wifi/bluetooth co-exist");
68 const u8 iwl_bcast_addr
[ETH_ALEN
] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
71 /* This function both allocates and initializes hw and priv. */
72 struct ieee80211_hw
*iwl_alloc_all(struct iwl_cfg
*cfg
)
74 struct iwl_priv
*priv
;
75 /* mac80211 allocates memory for this device instance, including
76 * space for this driver's private structure */
77 struct ieee80211_hw
*hw
;
79 hw
= ieee80211_alloc_hw(sizeof(struct iwl_priv
),
80 cfg
->ops
->ieee80211_ops
);
82 pr_err("%s: Can not allocate network device\n",
94 #define MAX_BIT_RATE_40_MHZ 150 /* Mbps */
95 #define MAX_BIT_RATE_20_MHZ 72 /* Mbps */
96 static void iwlcore_init_ht_hw_capab(const struct iwl_priv
*priv
,
97 struct ieee80211_sta_ht_cap
*ht_info
,
98 enum ieee80211_band band
)
100 u16 max_bit_rate
= 0;
101 u8 rx_chains_num
= priv
->hw_params
.rx_chains_num
;
102 u8 tx_chains_num
= priv
->hw_params
.tx_chains_num
;
105 memset(&ht_info
->mcs
, 0, sizeof(ht_info
->mcs
));
107 ht_info
->ht_supported
= true;
109 if (priv
->cfg
->ht_params
&&
110 priv
->cfg
->ht_params
->ht_greenfield_support
)
111 ht_info
->cap
|= IEEE80211_HT_CAP_GRN_FLD
;
112 ht_info
->cap
|= IEEE80211_HT_CAP_SGI_20
;
113 max_bit_rate
= MAX_BIT_RATE_20_MHZ
;
114 if (priv
->hw_params
.ht40_channel
& BIT(band
)) {
115 ht_info
->cap
|= IEEE80211_HT_CAP_SUP_WIDTH_20_40
;
116 ht_info
->cap
|= IEEE80211_HT_CAP_SGI_40
;
117 ht_info
->mcs
.rx_mask
[4] = 0x01;
118 max_bit_rate
= MAX_BIT_RATE_40_MHZ
;
121 if (priv
->cfg
->mod_params
->amsdu_size_8K
)
122 ht_info
->cap
|= IEEE80211_HT_CAP_MAX_AMSDU
;
124 ht_info
->ampdu_factor
= CFG_HT_RX_AMPDU_FACTOR_DEF
;
125 if (priv
->cfg
->bt_params
&& priv
->cfg
->bt_params
->ampdu_factor
)
126 ht_info
->ampdu_factor
= priv
->cfg
->bt_params
->ampdu_factor
;
127 ht_info
->ampdu_density
= CFG_HT_MPDU_DENSITY_DEF
;
128 if (priv
->cfg
->bt_params
&& priv
->cfg
->bt_params
->ampdu_density
)
129 ht_info
->ampdu_density
= priv
->cfg
->bt_params
->ampdu_density
;
131 ht_info
->mcs
.rx_mask
[0] = 0xFF;
132 if (rx_chains_num
>= 2)
133 ht_info
->mcs
.rx_mask
[1] = 0xFF;
134 if (rx_chains_num
>= 3)
135 ht_info
->mcs
.rx_mask
[2] = 0xFF;
137 /* Highest supported Rx data rate */
138 max_bit_rate
*= rx_chains_num
;
139 WARN_ON(max_bit_rate
& ~IEEE80211_HT_MCS_RX_HIGHEST_MASK
);
140 ht_info
->mcs
.rx_highest
= cpu_to_le16(max_bit_rate
);
142 /* Tx MCS capabilities */
143 ht_info
->mcs
.tx_params
= IEEE80211_HT_MCS_TX_DEFINED
;
144 if (tx_chains_num
!= rx_chains_num
) {
145 ht_info
->mcs
.tx_params
|= IEEE80211_HT_MCS_TX_RX_DIFF
;
146 ht_info
->mcs
.tx_params
|= ((tx_chains_num
- 1) <<
147 IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT
);
152 * iwlcore_init_geos - Initialize mac80211's geo/channel info based from eeprom
154 int iwlcore_init_geos(struct iwl_priv
*priv
)
156 struct iwl_channel_info
*ch
;
157 struct ieee80211_supported_band
*sband
;
158 struct ieee80211_channel
*channels
;
159 struct ieee80211_channel
*geo_ch
;
160 struct ieee80211_rate
*rates
;
163 if (priv
->bands
[IEEE80211_BAND_2GHZ
].n_bitrates
||
164 priv
->bands
[IEEE80211_BAND_5GHZ
].n_bitrates
) {
165 IWL_DEBUG_INFO(priv
, "Geography modes already initialized.\n");
166 set_bit(STATUS_GEO_CONFIGURED
, &priv
->status
);
170 channels
= kzalloc(sizeof(struct ieee80211_channel
) *
171 priv
->channel_count
, GFP_KERNEL
);
175 rates
= kzalloc((sizeof(struct ieee80211_rate
) * IWL_RATE_COUNT_LEGACY
),
182 /* 5.2GHz channels start after the 2.4GHz channels */
183 sband
= &priv
->bands
[IEEE80211_BAND_5GHZ
];
184 sband
->channels
= &channels
[ARRAY_SIZE(iwl_eeprom_band_1
)];
186 sband
->bitrates
= &rates
[IWL_FIRST_OFDM_RATE
];
187 sband
->n_bitrates
= IWL_RATE_COUNT_LEGACY
- IWL_FIRST_OFDM_RATE
;
189 if (priv
->cfg
->sku
& IWL_SKU_N
)
190 iwlcore_init_ht_hw_capab(priv
, &sband
->ht_cap
,
191 IEEE80211_BAND_5GHZ
);
193 sband
= &priv
->bands
[IEEE80211_BAND_2GHZ
];
194 sband
->channels
= channels
;
196 sband
->bitrates
= rates
;
197 sband
->n_bitrates
= IWL_RATE_COUNT_LEGACY
;
199 if (priv
->cfg
->sku
& IWL_SKU_N
)
200 iwlcore_init_ht_hw_capab(priv
, &sband
->ht_cap
,
201 IEEE80211_BAND_2GHZ
);
203 priv
->ieee_channels
= channels
;
204 priv
->ieee_rates
= rates
;
206 for (i
= 0; i
< priv
->channel_count
; i
++) {
207 ch
= &priv
->channel_info
[i
];
209 /* FIXME: might be removed if scan is OK */
210 if (!is_channel_valid(ch
))
213 sband
= &priv
->bands
[ch
->band
];
215 geo_ch
= &sband
->channels
[sband
->n_channels
++];
217 geo_ch
->center_freq
=
218 ieee80211_channel_to_frequency(ch
->channel
, ch
->band
);
219 geo_ch
->max_power
= ch
->max_power_avg
;
220 geo_ch
->max_antenna_gain
= 0xff;
221 geo_ch
->hw_value
= ch
->channel
;
223 if (is_channel_valid(ch
)) {
224 if (!(ch
->flags
& EEPROM_CHANNEL_IBSS
))
225 geo_ch
->flags
|= IEEE80211_CHAN_NO_IBSS
;
227 if (!(ch
->flags
& EEPROM_CHANNEL_ACTIVE
))
228 geo_ch
->flags
|= IEEE80211_CHAN_PASSIVE_SCAN
;
230 if (ch
->flags
& EEPROM_CHANNEL_RADAR
)
231 geo_ch
->flags
|= IEEE80211_CHAN_RADAR
;
233 geo_ch
->flags
|= ch
->ht40_extension_channel
;
235 if (ch
->max_power_avg
> priv
->tx_power_device_lmt
)
236 priv
->tx_power_device_lmt
= ch
->max_power_avg
;
238 geo_ch
->flags
|= IEEE80211_CHAN_DISABLED
;
241 IWL_DEBUG_INFO(priv
, "Channel %d Freq=%d[%sGHz] %s flag=0x%X\n",
242 ch
->channel
, geo_ch
->center_freq
,
243 is_channel_a_band(ch
) ? "5.2" : "2.4",
244 geo_ch
->flags
& IEEE80211_CHAN_DISABLED
?
245 "restricted" : "valid",
249 if ((priv
->bands
[IEEE80211_BAND_5GHZ
].n_channels
== 0) &&
250 priv
->cfg
->sku
& IWL_SKU_A
) {
251 IWL_INFO(priv
, "Incorrectly detected BG card as ABG. "
252 "Please send your PCI ID 0x%04X:0x%04X to maintainer.\n",
253 priv
->pci_dev
->device
,
254 priv
->pci_dev
->subsystem_device
);
255 priv
->cfg
->sku
&= ~IWL_SKU_A
;
258 IWL_INFO(priv
, "Tunable channels: %d 802.11bg, %d 802.11a channels\n",
259 priv
->bands
[IEEE80211_BAND_2GHZ
].n_channels
,
260 priv
->bands
[IEEE80211_BAND_5GHZ
].n_channels
);
262 set_bit(STATUS_GEO_CONFIGURED
, &priv
->status
);
268 * iwlcore_free_geos - undo allocations in iwlcore_init_geos
270 void iwlcore_free_geos(struct iwl_priv
*priv
)
272 kfree(priv
->ieee_channels
);
273 kfree(priv
->ieee_rates
);
274 clear_bit(STATUS_GEO_CONFIGURED
, &priv
->status
);
277 static bool iwl_is_channel_extension(struct iwl_priv
*priv
,
278 enum ieee80211_band band
,
279 u16 channel
, u8 extension_chan_offset
)
281 const struct iwl_channel_info
*ch_info
;
283 ch_info
= iwl_get_channel_info(priv
, band
, channel
);
284 if (!is_channel_valid(ch_info
))
287 if (extension_chan_offset
== IEEE80211_HT_PARAM_CHA_SEC_ABOVE
)
288 return !(ch_info
->ht40_extension_channel
&
289 IEEE80211_CHAN_NO_HT40PLUS
);
290 else if (extension_chan_offset
== IEEE80211_HT_PARAM_CHA_SEC_BELOW
)
291 return !(ch_info
->ht40_extension_channel
&
292 IEEE80211_CHAN_NO_HT40MINUS
);
297 bool iwl_is_ht40_tx_allowed(struct iwl_priv
*priv
,
298 struct iwl_rxon_context
*ctx
,
299 struct ieee80211_sta_ht_cap
*ht_cap
)
301 if (!ctx
->ht
.enabled
|| !ctx
->ht
.is_40mhz
)
305 * We do not check for IEEE80211_HT_CAP_SUP_WIDTH_20_40
306 * the bit will not set if it is pure 40MHz case
308 if (ht_cap
&& !ht_cap
->ht_supported
)
311 #ifdef CONFIG_IWLWIFI_DEBUGFS
312 if (priv
->disable_ht40
)
316 return iwl_is_channel_extension(priv
, priv
->band
,
317 le16_to_cpu(ctx
->staging
.channel
),
318 ctx
->ht
.extension_chan_offset
);
321 static u16
iwl_adjust_beacon_interval(u16 beacon_val
, u16 max_beacon_val
)
327 * If mac80211 hasn't given us a beacon interval, program
328 * the default into the device (not checking this here
329 * would cause the adjustment below to return the maximum
330 * value, which may break PAN.)
333 return DEFAULT_BEACON_INTERVAL
;
336 * If the beacon interval we obtained from the peer
337 * is too large, we'll have to wake up more often
338 * (and in IBSS case, we'll beacon too much)
340 * For example, if max_beacon_val is 4096, and the
341 * requested beacon interval is 7000, we'll have to
342 * use 3500 to be able to wake up on the beacons.
344 * This could badly influence beacon detection stats.
347 beacon_factor
= (beacon_val
+ max_beacon_val
) / max_beacon_val
;
348 new_val
= beacon_val
/ beacon_factor
;
351 new_val
= max_beacon_val
;
356 int iwl_send_rxon_timing(struct iwl_priv
*priv
, struct iwl_rxon_context
*ctx
)
359 s32 interval_tm
, rem
;
360 struct ieee80211_conf
*conf
= NULL
;
362 struct ieee80211_vif
*vif
= ctx
->vif
;
364 conf
= ieee80211_get_hw_conf(priv
->hw
);
366 lockdep_assert_held(&priv
->mutex
);
368 memset(&ctx
->timing
, 0, sizeof(struct iwl_rxon_time_cmd
));
370 ctx
->timing
.timestamp
= cpu_to_le64(priv
->timestamp
);
371 ctx
->timing
.listen_interval
= cpu_to_le16(conf
->listen_interval
);
373 beacon_int
= vif
? vif
->bss_conf
.beacon_int
: 0;
376 * TODO: For IBSS we need to get atim_window from mac80211,
377 * for now just always use 0
379 ctx
->timing
.atim_window
= 0;
381 if (ctx
->ctxid
== IWL_RXON_CTX_PAN
&&
382 (!ctx
->vif
|| ctx
->vif
->type
!= NL80211_IFTYPE_STATION
) &&
383 iwl_is_associated(priv
, IWL_RXON_CTX_BSS
) &&
384 priv
->contexts
[IWL_RXON_CTX_BSS
].vif
&&
385 priv
->contexts
[IWL_RXON_CTX_BSS
].vif
->bss_conf
.beacon_int
) {
386 ctx
->timing
.beacon_interval
=
387 priv
->contexts
[IWL_RXON_CTX_BSS
].timing
.beacon_interval
;
388 beacon_int
= le16_to_cpu(ctx
->timing
.beacon_interval
);
389 } else if (ctx
->ctxid
== IWL_RXON_CTX_BSS
&&
390 iwl_is_associated(priv
, IWL_RXON_CTX_PAN
) &&
391 priv
->contexts
[IWL_RXON_CTX_PAN
].vif
&&
392 priv
->contexts
[IWL_RXON_CTX_PAN
].vif
->bss_conf
.beacon_int
&&
393 (!iwl_is_associated_ctx(ctx
) || !ctx
->vif
||
394 !ctx
->vif
->bss_conf
.beacon_int
)) {
395 ctx
->timing
.beacon_interval
=
396 priv
->contexts
[IWL_RXON_CTX_PAN
].timing
.beacon_interval
;
397 beacon_int
= le16_to_cpu(ctx
->timing
.beacon_interval
);
399 beacon_int
= iwl_adjust_beacon_interval(beacon_int
,
400 priv
->hw_params
.max_beacon_itrvl
* TIME_UNIT
);
401 ctx
->timing
.beacon_interval
= cpu_to_le16(beacon_int
);
404 tsf
= priv
->timestamp
; /* tsf is modifed by do_div: copy it */
405 interval_tm
= beacon_int
* TIME_UNIT
;
406 rem
= do_div(tsf
, interval_tm
);
407 ctx
->timing
.beacon_init_val
= cpu_to_le32(interval_tm
- rem
);
409 ctx
->timing
.dtim_period
= vif
? (vif
->bss_conf
.dtim_period
?: 1) : 1;
411 IWL_DEBUG_ASSOC(priv
,
412 "beacon interval %d beacon timer %d beacon tim %d\n",
413 le16_to_cpu(ctx
->timing
.beacon_interval
),
414 le32_to_cpu(ctx
->timing
.beacon_init_val
),
415 le16_to_cpu(ctx
->timing
.atim_window
));
417 return iwl_send_cmd_pdu(priv
, ctx
->rxon_timing_cmd
,
418 sizeof(ctx
->timing
), &ctx
->timing
);
421 void iwl_set_rxon_hwcrypto(struct iwl_priv
*priv
, struct iwl_rxon_context
*ctx
,
424 struct iwl_rxon_cmd
*rxon
= &ctx
->staging
;
427 rxon
->filter_flags
&= ~RXON_FILTER_DIS_DECRYPT_MSK
;
429 rxon
->filter_flags
|= RXON_FILTER_DIS_DECRYPT_MSK
;
433 /* validate RXON structure is valid */
434 int iwl_check_rxon_cmd(struct iwl_priv
*priv
, struct iwl_rxon_context
*ctx
)
436 struct iwl_rxon_cmd
*rxon
= &ctx
->staging
;
439 if (rxon
->flags
& RXON_FLG_BAND_24G_MSK
) {
440 if (rxon
->flags
& RXON_FLG_TGJ_NARROW_BAND_MSK
) {
441 IWL_WARN(priv
, "check 2.4G: wrong narrow\n");
444 if (rxon
->flags
& RXON_FLG_RADAR_DETECT_MSK
) {
445 IWL_WARN(priv
, "check 2.4G: wrong radar\n");
449 if (!(rxon
->flags
& RXON_FLG_SHORT_SLOT_MSK
)) {
450 IWL_WARN(priv
, "check 5.2G: not short slot!\n");
453 if (rxon
->flags
& RXON_FLG_CCK_MSK
) {
454 IWL_WARN(priv
, "check 5.2G: CCK!\n");
458 if ((rxon
->node_addr
[0] | rxon
->bssid_addr
[0]) & 0x1) {
459 IWL_WARN(priv
, "mac/bssid mcast!\n");
463 /* make sure basic rates 6Mbps and 1Mbps are supported */
464 if ((rxon
->ofdm_basic_rates
& IWL_RATE_6M_MASK
) == 0 &&
465 (rxon
->cck_basic_rates
& IWL_RATE_1M_MASK
) == 0) {
466 IWL_WARN(priv
, "neither 1 nor 6 are basic\n");
470 if (le16_to_cpu(rxon
->assoc_id
) > 2007) {
471 IWL_WARN(priv
, "aid > 2007\n");
475 if ((rxon
->flags
& (RXON_FLG_CCK_MSK
| RXON_FLG_SHORT_SLOT_MSK
))
476 == (RXON_FLG_CCK_MSK
| RXON_FLG_SHORT_SLOT_MSK
)) {
477 IWL_WARN(priv
, "CCK and short slot\n");
481 if ((rxon
->flags
& (RXON_FLG_CCK_MSK
| RXON_FLG_AUTO_DETECT_MSK
))
482 == (RXON_FLG_CCK_MSK
| RXON_FLG_AUTO_DETECT_MSK
)) {
483 IWL_WARN(priv
, "CCK and auto detect");
487 if ((rxon
->flags
& (RXON_FLG_AUTO_DETECT_MSK
|
488 RXON_FLG_TGG_PROTECT_MSK
)) ==
489 RXON_FLG_TGG_PROTECT_MSK
) {
490 IWL_WARN(priv
, "TGg but no auto-detect\n");
495 IWL_WARN(priv
, "Tuning to channel %d\n",
496 le16_to_cpu(rxon
->channel
));
499 IWL_ERR(priv
, "Invalid RXON\n");
506 * iwl_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed
507 * @priv: staging_rxon is compared to active_rxon
509 * If the RXON structure is changing enough to require a new tune,
510 * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that
511 * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required.
513 int iwl_full_rxon_required(struct iwl_priv
*priv
,
514 struct iwl_rxon_context
*ctx
)
516 const struct iwl_rxon_cmd
*staging
= &ctx
->staging
;
517 const struct iwl_rxon_cmd
*active
= &ctx
->active
;
521 IWL_DEBUG_INFO(priv, "need full RXON - " #cond "\n"); \
525 #define CHK_NEQ(c1, c2) \
526 if ((c1) != (c2)) { \
527 IWL_DEBUG_INFO(priv, "need full RXON - " \
528 #c1 " != " #c2 " - %d != %d\n", \
533 /* These items are only settable from the full RXON command */
534 CHK(!iwl_is_associated_ctx(ctx
));
535 CHK(compare_ether_addr(staging
->bssid_addr
, active
->bssid_addr
));
536 CHK(compare_ether_addr(staging
->node_addr
, active
->node_addr
));
537 CHK(compare_ether_addr(staging
->wlap_bssid_addr
,
538 active
->wlap_bssid_addr
));
539 CHK_NEQ(staging
->dev_type
, active
->dev_type
);
540 CHK_NEQ(staging
->channel
, active
->channel
);
541 CHK_NEQ(staging
->air_propagation
, active
->air_propagation
);
542 CHK_NEQ(staging
->ofdm_ht_single_stream_basic_rates
,
543 active
->ofdm_ht_single_stream_basic_rates
);
544 CHK_NEQ(staging
->ofdm_ht_dual_stream_basic_rates
,
545 active
->ofdm_ht_dual_stream_basic_rates
);
546 CHK_NEQ(staging
->ofdm_ht_triple_stream_basic_rates
,
547 active
->ofdm_ht_triple_stream_basic_rates
);
548 CHK_NEQ(staging
->assoc_id
, active
->assoc_id
);
550 /* flags, filter_flags, ofdm_basic_rates, and cck_basic_rates can
551 * be updated with the RXON_ASSOC command -- however only some
552 * flag transitions are allowed using RXON_ASSOC */
554 /* Check if we are not switching bands */
555 CHK_NEQ(staging
->flags
& RXON_FLG_BAND_24G_MSK
,
556 active
->flags
& RXON_FLG_BAND_24G_MSK
);
558 /* Check if we are switching association toggle */
559 CHK_NEQ(staging
->filter_flags
& RXON_FILTER_ASSOC_MSK
,
560 active
->filter_flags
& RXON_FILTER_ASSOC_MSK
);
568 u8
iwl_rate_get_lowest_plcp(struct iwl_priv
*priv
,
569 struct iwl_rxon_context
*ctx
)
572 * Assign the lowest rate -- should really get this from
573 * the beacon skb from mac80211.
575 if (ctx
->staging
.flags
& RXON_FLG_BAND_24G_MSK
)
576 return IWL_RATE_1M_PLCP
;
578 return IWL_RATE_6M_PLCP
;
581 static void _iwl_set_rxon_ht(struct iwl_priv
*priv
,
582 struct iwl_ht_config
*ht_conf
,
583 struct iwl_rxon_context
*ctx
)
585 struct iwl_rxon_cmd
*rxon
= &ctx
->staging
;
587 if (!ctx
->ht
.enabled
) {
588 rxon
->flags
&= ~(RXON_FLG_CHANNEL_MODE_MSK
|
589 RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK
|
590 RXON_FLG_HT40_PROT_MSK
|
591 RXON_FLG_HT_PROT_MSK
);
595 /* FIXME: if the definition of ht.protection changed, the "translation"
596 * will be needed for rxon->flags
598 rxon
->flags
|= cpu_to_le32(ctx
->ht
.protection
<< RXON_FLG_HT_OPERATING_MODE_POS
);
600 /* Set up channel bandwidth:
601 * 20 MHz only, 20/40 mixed or pure 40 if ht40 ok */
602 /* clear the HT channel mode before set the mode */
603 rxon
->flags
&= ~(RXON_FLG_CHANNEL_MODE_MSK
|
604 RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK
);
605 if (iwl_is_ht40_tx_allowed(priv
, ctx
, NULL
)) {
607 if (ctx
->ht
.protection
== IEEE80211_HT_OP_MODE_PROTECTION_20MHZ
) {
608 rxon
->flags
|= RXON_FLG_CHANNEL_MODE_PURE_40
;
609 /* Note: control channel is opposite of extension channel */
610 switch (ctx
->ht
.extension_chan_offset
) {
611 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE
:
612 rxon
->flags
&= ~RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK
;
614 case IEEE80211_HT_PARAM_CHA_SEC_BELOW
:
615 rxon
->flags
|= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK
;
619 /* Note: control channel is opposite of extension channel */
620 switch (ctx
->ht
.extension_chan_offset
) {
621 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE
:
622 rxon
->flags
&= ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK
);
623 rxon
->flags
|= RXON_FLG_CHANNEL_MODE_MIXED
;
625 case IEEE80211_HT_PARAM_CHA_SEC_BELOW
:
626 rxon
->flags
|= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK
;
627 rxon
->flags
|= RXON_FLG_CHANNEL_MODE_MIXED
;
629 case IEEE80211_HT_PARAM_CHA_SEC_NONE
:
631 /* channel location only valid if in Mixed mode */
632 IWL_ERR(priv
, "invalid extension channel offset\n");
637 rxon
->flags
|= RXON_FLG_CHANNEL_MODE_LEGACY
;
640 if (priv
->cfg
->ops
->hcmd
->set_rxon_chain
)
641 priv
->cfg
->ops
->hcmd
->set_rxon_chain(priv
, ctx
);
643 IWL_DEBUG_ASSOC(priv
, "rxon flags 0x%X operation mode :0x%X "
644 "extension channel offset 0x%x\n",
645 le32_to_cpu(rxon
->flags
), ctx
->ht
.protection
,
646 ctx
->ht
.extension_chan_offset
);
649 void iwl_set_rxon_ht(struct iwl_priv
*priv
, struct iwl_ht_config
*ht_conf
)
651 struct iwl_rxon_context
*ctx
;
653 for_each_context(priv
, ctx
)
654 _iwl_set_rxon_ht(priv
, ht_conf
, ctx
);
657 /* Return valid, unused, channel for a passive scan to reset the RF */
658 u8
iwl_get_single_channel_number(struct iwl_priv
*priv
,
659 enum ieee80211_band band
)
661 const struct iwl_channel_info
*ch_info
;
665 struct iwl_rxon_context
*ctx
;
667 if (band
== IEEE80211_BAND_5GHZ
) {
669 max
= priv
->channel_count
;
675 for (i
= min
; i
< max
; i
++) {
678 for_each_context(priv
, ctx
) {
679 busy
= priv
->channel_info
[i
].channel
==
680 le16_to_cpu(ctx
->staging
.channel
);
688 channel
= priv
->channel_info
[i
].channel
;
689 ch_info
= iwl_get_channel_info(priv
, band
, channel
);
690 if (is_channel_valid(ch_info
))
698 * iwl_set_rxon_channel - Set the band and channel values in staging RXON
699 * @ch: requested channel as a pointer to struct ieee80211_channel
701 * NOTE: Does not commit to the hardware; it sets appropriate bit fields
702 * in the staging RXON flag structure based on the ch->band
704 int iwl_set_rxon_channel(struct iwl_priv
*priv
, struct ieee80211_channel
*ch
,
705 struct iwl_rxon_context
*ctx
)
707 enum ieee80211_band band
= ch
->band
;
708 u16 channel
= ch
->hw_value
;
710 if ((le16_to_cpu(ctx
->staging
.channel
) == channel
) &&
711 (priv
->band
== band
))
714 ctx
->staging
.channel
= cpu_to_le16(channel
);
715 if (band
== IEEE80211_BAND_5GHZ
)
716 ctx
->staging
.flags
&= ~RXON_FLG_BAND_24G_MSK
;
718 ctx
->staging
.flags
|= RXON_FLG_BAND_24G_MSK
;
722 IWL_DEBUG_INFO(priv
, "Staging channel set to %d [%d]\n", channel
, band
);
727 void iwl_set_flags_for_band(struct iwl_priv
*priv
,
728 struct iwl_rxon_context
*ctx
,
729 enum ieee80211_band band
,
730 struct ieee80211_vif
*vif
)
732 if (band
== IEEE80211_BAND_5GHZ
) {
733 ctx
->staging
.flags
&=
734 ~(RXON_FLG_BAND_24G_MSK
| RXON_FLG_AUTO_DETECT_MSK
736 ctx
->staging
.flags
|= RXON_FLG_SHORT_SLOT_MSK
;
738 /* Copied from iwl_post_associate() */
739 if (vif
&& vif
->bss_conf
.use_short_slot
)
740 ctx
->staging
.flags
|= RXON_FLG_SHORT_SLOT_MSK
;
742 ctx
->staging
.flags
&= ~RXON_FLG_SHORT_SLOT_MSK
;
744 ctx
->staging
.flags
|= RXON_FLG_BAND_24G_MSK
;
745 ctx
->staging
.flags
|= RXON_FLG_AUTO_DETECT_MSK
;
746 ctx
->staging
.flags
&= ~RXON_FLG_CCK_MSK
;
751 * initialize rxon structure with default values from eeprom
753 void iwl_connection_init_rx_config(struct iwl_priv
*priv
,
754 struct iwl_rxon_context
*ctx
)
756 const struct iwl_channel_info
*ch_info
;
758 memset(&ctx
->staging
, 0, sizeof(ctx
->staging
));
761 ctx
->staging
.dev_type
= ctx
->unused_devtype
;
762 } else switch (ctx
->vif
->type
) {
763 case NL80211_IFTYPE_AP
:
764 ctx
->staging
.dev_type
= ctx
->ap_devtype
;
767 case NL80211_IFTYPE_STATION
:
768 ctx
->staging
.dev_type
= ctx
->station_devtype
;
769 ctx
->staging
.filter_flags
= RXON_FILTER_ACCEPT_GRP_MSK
;
772 case NL80211_IFTYPE_ADHOC
:
773 ctx
->staging
.dev_type
= ctx
->ibss_devtype
;
774 ctx
->staging
.flags
= RXON_FLG_SHORT_PREAMBLE_MSK
;
775 ctx
->staging
.filter_flags
= RXON_FILTER_BCON_AWARE_MSK
|
776 RXON_FILTER_ACCEPT_GRP_MSK
;
780 IWL_ERR(priv
, "Unsupported interface type %d\n",
786 /* TODO: Figure out when short_preamble would be set and cache from
788 if (!hw_to_local(priv
->hw
)->short_preamble
)
789 ctx
->staging
.flags
&= ~RXON_FLG_SHORT_PREAMBLE_MSK
;
791 ctx
->staging
.flags
|= RXON_FLG_SHORT_PREAMBLE_MSK
;
794 ch_info
= iwl_get_channel_info(priv
, priv
->band
,
795 le16_to_cpu(ctx
->active
.channel
));
798 ch_info
= &priv
->channel_info
[0];
800 ctx
->staging
.channel
= cpu_to_le16(ch_info
->channel
);
801 priv
->band
= ch_info
->band
;
803 iwl_set_flags_for_band(priv
, ctx
, priv
->band
, ctx
->vif
);
805 ctx
->staging
.ofdm_basic_rates
=
806 (IWL_OFDM_RATES_MASK
>> IWL_FIRST_OFDM_RATE
) & 0xFF;
807 ctx
->staging
.cck_basic_rates
=
808 (IWL_CCK_RATES_MASK
>> IWL_FIRST_CCK_RATE
) & 0xF;
810 /* clear both MIX and PURE40 mode flag */
811 ctx
->staging
.flags
&= ~(RXON_FLG_CHANNEL_MODE_MIXED
|
812 RXON_FLG_CHANNEL_MODE_PURE_40
);
814 memcpy(ctx
->staging
.node_addr
, ctx
->vif
->addr
, ETH_ALEN
);
816 ctx
->staging
.ofdm_ht_single_stream_basic_rates
= 0xff;
817 ctx
->staging
.ofdm_ht_dual_stream_basic_rates
= 0xff;
818 ctx
->staging
.ofdm_ht_triple_stream_basic_rates
= 0xff;
821 void iwl_set_rate(struct iwl_priv
*priv
)
823 const struct ieee80211_supported_band
*hw
= NULL
;
824 struct ieee80211_rate
*rate
;
825 struct iwl_rxon_context
*ctx
;
828 hw
= iwl_get_hw_mode(priv
, priv
->band
);
830 IWL_ERR(priv
, "Failed to set rate: unable to get hw mode\n");
834 priv
->active_rate
= 0;
836 for (i
= 0; i
< hw
->n_bitrates
; i
++) {
837 rate
= &(hw
->bitrates
[i
]);
838 if (rate
->hw_value
< IWL_RATE_COUNT_LEGACY
)
839 priv
->active_rate
|= (1 << rate
->hw_value
);
842 IWL_DEBUG_RATE(priv
, "Set active_rate = %0x\n", priv
->active_rate
);
844 for_each_context(priv
, ctx
) {
845 ctx
->staging
.cck_basic_rates
=
846 (IWL_CCK_BASIC_RATES_MASK
>> IWL_FIRST_CCK_RATE
) & 0xF;
848 ctx
->staging
.ofdm_basic_rates
=
849 (IWL_OFDM_BASIC_RATES_MASK
>> IWL_FIRST_OFDM_RATE
) & 0xFF;
853 void iwl_chswitch_done(struct iwl_priv
*priv
, bool is_success
)
857 * See iwl_mac_channel_switch.
859 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
861 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
864 if (priv
->switch_rxon
.switch_in_progress
) {
865 ieee80211_chswitch_done(ctx
->vif
, is_success
);
866 mutex_lock(&priv
->mutex
);
867 priv
->switch_rxon
.switch_in_progress
= false;
868 mutex_unlock(&priv
->mutex
);
872 #ifdef CONFIG_IWLWIFI_DEBUG
873 void iwl_print_rx_config_cmd(struct iwl_priv
*priv
,
874 struct iwl_rxon_context
*ctx
)
876 struct iwl_rxon_cmd
*rxon
= &ctx
->staging
;
878 IWL_DEBUG_RADIO(priv
, "RX CONFIG:\n");
879 iwl_print_hex_dump(priv
, IWL_DL_RADIO
, (u8
*) rxon
, sizeof(*rxon
));
880 IWL_DEBUG_RADIO(priv
, "u16 channel: 0x%x\n", le16_to_cpu(rxon
->channel
));
881 IWL_DEBUG_RADIO(priv
, "u32 flags: 0x%08X\n", le32_to_cpu(rxon
->flags
));
882 IWL_DEBUG_RADIO(priv
, "u32 filter_flags: 0x%08x\n",
883 le32_to_cpu(rxon
->filter_flags
));
884 IWL_DEBUG_RADIO(priv
, "u8 dev_type: 0x%x\n", rxon
->dev_type
);
885 IWL_DEBUG_RADIO(priv
, "u8 ofdm_basic_rates: 0x%02x\n",
886 rxon
->ofdm_basic_rates
);
887 IWL_DEBUG_RADIO(priv
, "u8 cck_basic_rates: 0x%02x\n", rxon
->cck_basic_rates
);
888 IWL_DEBUG_RADIO(priv
, "u8[6] node_addr: %pM\n", rxon
->node_addr
);
889 IWL_DEBUG_RADIO(priv
, "u8[6] bssid_addr: %pM\n", rxon
->bssid_addr
);
890 IWL_DEBUG_RADIO(priv
, "u16 assoc_id: 0x%x\n", le16_to_cpu(rxon
->assoc_id
));
894 void iwlagn_fw_error(struct iwl_priv
*priv
, bool ondemand
)
896 unsigned int reload_msec
;
897 unsigned long reload_jiffies
;
899 /* Set the FW error flag -- cleared on iwl_down */
900 set_bit(STATUS_FW_ERROR
, &priv
->status
);
902 /* Cancel currently queued command. */
903 clear_bit(STATUS_HCMD_ACTIVE
, &priv
->status
);
905 /* Keep the restart process from trying to send host
906 * commands by clearing the ready bit */
907 clear_bit(STATUS_READY
, &priv
->status
);
909 wake_up_interruptible(&priv
->wait_command_queue
);
913 * If firmware keep reloading, then it indicate something
914 * serious wrong and firmware having problem to recover
915 * from it. Instead of keep trying which will fill the syslog
916 * and hang the system, let's just stop it
918 reload_jiffies
= jiffies
;
919 reload_msec
= jiffies_to_msecs((long) reload_jiffies
-
920 (long) priv
->reload_jiffies
);
921 priv
->reload_jiffies
= reload_jiffies
;
922 if (reload_msec
<= IWL_MIN_RELOAD_DURATION
) {
923 priv
->reload_count
++;
924 if (priv
->reload_count
>= IWL_MAX_CONTINUE_RELOAD_CNT
) {
925 IWL_ERR(priv
, "BUG_ON, Stop restarting\n");
929 priv
->reload_count
= 0;
932 if (!test_bit(STATUS_EXIT_PENDING
, &priv
->status
)) {
933 if (priv
->cfg
->mod_params
->restart_fw
) {
934 IWL_DEBUG(priv
, IWL_DL_FW_ERRORS
,
935 "Restarting adapter due to uCode error.\n");
936 queue_work(priv
->workqueue
, &priv
->restart
);
938 IWL_DEBUG(priv
, IWL_DL_FW_ERRORS
,
939 "Detected FW error, but not restarting\n");
944 * iwl_irq_handle_error - called for HW or SW error interrupt from card
946 void iwl_irq_handle_error(struct iwl_priv
*priv
)
948 /* W/A for WiFi/WiMAX coex and WiMAX own the RF */
949 if (priv
->cfg
->internal_wimax_coex
&&
950 (!(iwl_read_prph(priv
, APMG_CLK_CTRL_REG
) &
951 APMS_CLK_VAL_MRB_FUNC_MODE
) ||
952 (iwl_read_prph(priv
, APMG_PS_CTRL_REG
) &
953 APMG_PS_CTRL_VAL_RESET_REQ
))) {
955 * Keep the restart process from trying to send host
956 * commands by clearing the ready bit.
958 clear_bit(STATUS_READY
, &priv
->status
);
959 clear_bit(STATUS_HCMD_ACTIVE
, &priv
->status
);
960 wake_up_interruptible(&priv
->wait_command_queue
);
961 IWL_ERR(priv
, "RF is used by WiMAX\n");
965 IWL_ERR(priv
, "Loaded firmware version: %s\n",
966 priv
->hw
->wiphy
->fw_version
);
968 priv
->cfg
->ops
->lib
->dump_nic_error_log(priv
);
969 if (priv
->cfg
->ops
->lib
->dump_csr
)
970 priv
->cfg
->ops
->lib
->dump_csr(priv
);
971 if (priv
->cfg
->ops
->lib
->dump_fh
)
972 priv
->cfg
->ops
->lib
->dump_fh(priv
, NULL
, false);
973 priv
->cfg
->ops
->lib
->dump_nic_event_log(priv
, false, NULL
, false);
974 #ifdef CONFIG_IWLWIFI_DEBUG
975 if (iwl_get_debug_level(priv
) & IWL_DL_FW_ERRORS
)
976 iwl_print_rx_config_cmd(priv
,
977 &priv
->contexts
[IWL_RXON_CTX_BSS
]);
980 iwlagn_fw_error(priv
, false);
983 static int iwl_apm_stop_master(struct iwl_priv
*priv
)
987 /* stop device's busmaster DMA activity */
988 iwl_set_bit(priv
, CSR_RESET
, CSR_RESET_REG_FLAG_STOP_MASTER
);
990 ret
= iwl_poll_bit(priv
, CSR_RESET
, CSR_RESET_REG_FLAG_MASTER_DISABLED
,
991 CSR_RESET_REG_FLAG_MASTER_DISABLED
, 100);
993 IWL_WARN(priv
, "Master Disable Timed Out, 100 usec\n");
995 IWL_DEBUG_INFO(priv
, "stop master\n");
1000 void iwl_apm_stop(struct iwl_priv
*priv
)
1002 IWL_DEBUG_INFO(priv
, "Stop card, put in low power state\n");
1004 /* Stop device's DMA activity */
1005 iwl_apm_stop_master(priv
);
1007 /* Reset the entire device */
1008 iwl_set_bit(priv
, CSR_RESET
, CSR_RESET_REG_FLAG_SW_RESET
);
1013 * Clear "initialization complete" bit to move adapter from
1014 * D0A* (powered-up Active) --> D0U* (Uninitialized) state.
1016 iwl_clear_bit(priv
, CSR_GP_CNTRL
, CSR_GP_CNTRL_REG_FLAG_INIT_DONE
);
1021 * Start up NIC's basic functionality after it has been reset
1022 * (e.g. after platform boot, or shutdown via iwl_apm_stop())
1023 * NOTE: This does not load uCode nor start the embedded processor
1025 int iwl_apm_init(struct iwl_priv
*priv
)
1030 IWL_DEBUG_INFO(priv
, "Init card's basic functions\n");
1033 * Use "set_bit" below rather than "write", to preserve any hardware
1034 * bits already set by default after reset.
1037 /* Disable L0S exit timer (platform NMI Work/Around) */
1038 iwl_set_bit(priv
, CSR_GIO_CHICKEN_BITS
,
1039 CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER
);
1042 * Disable L0s without affecting L1;
1043 * don't wait for ICH L0s (ICH bug W/A)
1045 iwl_set_bit(priv
, CSR_GIO_CHICKEN_BITS
,
1046 CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX
);
1048 /* Set FH wait threshold to maximum (HW error during stress W/A) */
1049 iwl_set_bit(priv
, CSR_DBG_HPET_MEM_REG
, CSR_DBG_HPET_MEM_REG_VAL
);
1052 * Enable HAP INTA (interrupt from management bus) to
1053 * wake device's PCI Express link L1a -> L0s
1054 * NOTE: This is no-op for 3945 (non-existant bit)
1056 iwl_set_bit(priv
, CSR_HW_IF_CONFIG_REG
,
1057 CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A
);
1060 * HW bug W/A for instability in PCIe bus L0->L0S->L1 transition.
1061 * Check if BIOS (or OS) enabled L1-ASPM on this device.
1062 * If so (likely), disable L0S, so device moves directly L0->L1;
1063 * costs negligible amount of power savings.
1064 * If not (unlikely), enable L0S, so there is at least some
1065 * power savings, even without L1.
1067 if (priv
->cfg
->base_params
->set_l0s
) {
1068 lctl
= iwl_pcie_link_ctl(priv
);
1069 if ((lctl
& PCI_CFG_LINK_CTRL_VAL_L1_EN
) ==
1070 PCI_CFG_LINK_CTRL_VAL_L1_EN
) {
1071 /* L1-ASPM enabled; disable(!) L0S */
1072 iwl_set_bit(priv
, CSR_GIO_REG
,
1073 CSR_GIO_REG_VAL_L0S_ENABLED
);
1074 IWL_DEBUG_POWER(priv
, "L1 Enabled; Disabling L0S\n");
1076 /* L1-ASPM disabled; enable(!) L0S */
1077 iwl_clear_bit(priv
, CSR_GIO_REG
,
1078 CSR_GIO_REG_VAL_L0S_ENABLED
);
1079 IWL_DEBUG_POWER(priv
, "L1 Disabled; Enabling L0S\n");
1083 /* Configure analog phase-lock-loop before activating to D0A */
1084 if (priv
->cfg
->base_params
->pll_cfg_val
)
1085 iwl_set_bit(priv
, CSR_ANA_PLL_CFG
,
1086 priv
->cfg
->base_params
->pll_cfg_val
);
1089 * Set "initialization complete" bit to move adapter from
1090 * D0U* --> D0A* (powered-up active) state.
1092 iwl_set_bit(priv
, CSR_GP_CNTRL
, CSR_GP_CNTRL_REG_FLAG_INIT_DONE
);
1095 * Wait for clock stabilization; once stabilized, access to
1096 * device-internal resources is supported, e.g. iwl_write_prph()
1097 * and accesses to uCode SRAM.
1099 ret
= iwl_poll_bit(priv
, CSR_GP_CNTRL
,
1100 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY
,
1101 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY
, 25000);
1103 IWL_DEBUG_INFO(priv
, "Failed to init the card\n");
1108 * Enable DMA and BSM (if used) clocks, wait for them to stabilize.
1109 * BSM (Boostrap State Machine) is only in 3945 and 4965;
1110 * later devices (i.e. 5000 and later) have non-volatile SRAM,
1111 * and don't need BSM to restore data after power-saving sleep.
1113 * Write to "CLK_EN_REG"; "1" bits enable clocks, while "0" bits
1114 * do not disable clocks. This preserves any hardware bits already
1115 * set by default in "CLK_CTRL_REG" after reset.
1117 if (priv
->cfg
->base_params
->use_bsm
)
1118 iwl_write_prph(priv
, APMG_CLK_EN_REG
,
1119 APMG_CLK_VAL_DMA_CLK_RQT
| APMG_CLK_VAL_BSM_CLK_RQT
);
1121 iwl_write_prph(priv
, APMG_CLK_EN_REG
,
1122 APMG_CLK_VAL_DMA_CLK_RQT
);
1125 /* Disable L1-Active */
1126 iwl_set_bits_prph(priv
, APMG_PCIDEV_STT_REG
,
1127 APMG_PCIDEV_STT_VAL_L1_ACT_DIS
);
1134 int iwl_set_tx_power(struct iwl_priv
*priv
, s8 tx_power
, bool force
)
1139 struct iwl_rxon_context
*ctx
= &priv
->contexts
[IWL_RXON_CTX_BSS
];
1141 lockdep_assert_held(&priv
->mutex
);
1143 if (priv
->tx_power_user_lmt
== tx_power
&& !force
)
1146 if (!priv
->cfg
->ops
->lib
->send_tx_power
)
1149 if (tx_power
< IWLAGN_TX_POWER_TARGET_POWER_MIN
) {
1151 "Requested user TXPOWER %d below lower limit %d.\n",
1153 IWLAGN_TX_POWER_TARGET_POWER_MIN
);
1157 if (tx_power
> priv
->tx_power_device_lmt
) {
1159 "Requested user TXPOWER %d above upper limit %d.\n",
1160 tx_power
, priv
->tx_power_device_lmt
);
1164 if (!iwl_is_ready_rf(priv
))
1167 /* scan complete and commit_rxon use tx_power_next value,
1168 * it always need to be updated for newest request */
1169 priv
->tx_power_next
= tx_power
;
1171 /* do not set tx power when scanning or channel changing */
1172 defer
= test_bit(STATUS_SCANNING
, &priv
->status
) ||
1173 memcmp(&ctx
->active
, &ctx
->staging
, sizeof(ctx
->staging
));
1174 if (defer
&& !force
) {
1175 IWL_DEBUG_INFO(priv
, "Deferring tx power set\n");
1179 prev_tx_power
= priv
->tx_power_user_lmt
;
1180 priv
->tx_power_user_lmt
= tx_power
;
1182 ret
= priv
->cfg
->ops
->lib
->send_tx_power(priv
);
1184 /* if fail to set tx_power, restore the orig. tx power */
1186 priv
->tx_power_user_lmt
= prev_tx_power
;
1187 priv
->tx_power_next
= prev_tx_power
;
1192 void iwl_send_bt_config(struct iwl_priv
*priv
)
1194 struct iwl_bt_cmd bt_cmd
= {
1195 .lead_time
= BT_LEAD_TIME_DEF
,
1196 .max_kill
= BT_MAX_KILL_DEF
,
1201 if (!bt_coex_active
)
1202 bt_cmd
.flags
= BT_COEX_DISABLE
;
1204 bt_cmd
.flags
= BT_COEX_ENABLE
;
1206 priv
->bt_enable_flag
= bt_cmd
.flags
;
1207 IWL_DEBUG_INFO(priv
, "BT coex %s\n",
1208 (bt_cmd
.flags
== BT_COEX_DISABLE
) ? "disable" : "active");
1210 if (iwl_send_cmd_pdu(priv
, REPLY_BT_CONFIG
,
1211 sizeof(struct iwl_bt_cmd
), &bt_cmd
))
1212 IWL_ERR(priv
, "failed to send BT Coex Config\n");
1215 int iwl_send_statistics_request(struct iwl_priv
*priv
, u8 flags
, bool clear
)
1217 struct iwl_statistics_cmd statistics_cmd
= {
1218 .configuration_flags
=
1219 clear
? IWL_STATS_CONF_CLEAR_STATS
: 0,
1222 if (flags
& CMD_ASYNC
)
1223 return iwl_send_cmd_pdu_async(priv
, REPLY_STATISTICS_CMD
,
1224 sizeof(struct iwl_statistics_cmd
),
1225 &statistics_cmd
, NULL
);
1227 return iwl_send_cmd_pdu(priv
, REPLY_STATISTICS_CMD
,
1228 sizeof(struct iwl_statistics_cmd
),
1232 void iwl_clear_isr_stats(struct iwl_priv
*priv
)
1234 memset(&priv
->isr_stats
, 0, sizeof(priv
->isr_stats
));
1237 int iwl_mac_conf_tx(struct ieee80211_hw
*hw
, u16 queue
,
1238 const struct ieee80211_tx_queue_params
*params
)
1240 struct iwl_priv
*priv
= hw
->priv
;
1241 struct iwl_rxon_context
*ctx
;
1242 unsigned long flags
;
1245 IWL_DEBUG_MAC80211(priv
, "enter\n");
1247 if (!iwl_is_ready_rf(priv
)) {
1248 IWL_DEBUG_MAC80211(priv
, "leave - RF not ready\n");
1252 if (queue
>= AC_NUM
) {
1253 IWL_DEBUG_MAC80211(priv
, "leave - queue >= AC_NUM %d\n", queue
);
1257 q
= AC_NUM
- 1 - queue
;
1259 spin_lock_irqsave(&priv
->lock
, flags
);
1263 * This may need to be done per interface in nl80211/cfg80211/mac80211.
1265 for_each_context(priv
, ctx
) {
1266 ctx
->qos_data
.def_qos_parm
.ac
[q
].cw_min
=
1267 cpu_to_le16(params
->cw_min
);
1268 ctx
->qos_data
.def_qos_parm
.ac
[q
].cw_max
=
1269 cpu_to_le16(params
->cw_max
);
1270 ctx
->qos_data
.def_qos_parm
.ac
[q
].aifsn
= params
->aifs
;
1271 ctx
->qos_data
.def_qos_parm
.ac
[q
].edca_txop
=
1272 cpu_to_le16((params
->txop
* 32));
1274 ctx
->qos_data
.def_qos_parm
.ac
[q
].reserved1
= 0;
1277 spin_unlock_irqrestore(&priv
->lock
, flags
);
1279 IWL_DEBUG_MAC80211(priv
, "leave\n");
1283 int iwl_mac_tx_last_beacon(struct ieee80211_hw
*hw
)
1285 struct iwl_priv
*priv
= hw
->priv
;
1287 return priv
->ibss_manager
== IWL_IBSS_MANAGER
;
1290 static int iwl_set_mode(struct iwl_priv
*priv
, struct iwl_rxon_context
*ctx
)
1292 iwl_connection_init_rx_config(priv
, ctx
);
1294 if (priv
->cfg
->ops
->hcmd
->set_rxon_chain
)
1295 priv
->cfg
->ops
->hcmd
->set_rxon_chain(priv
, ctx
);
1297 return iwlcore_commit_rxon(priv
, ctx
);
1300 static int iwl_setup_interface(struct iwl_priv
*priv
,
1301 struct iwl_rxon_context
*ctx
)
1303 struct ieee80211_vif
*vif
= ctx
->vif
;
1306 lockdep_assert_held(&priv
->mutex
);
1309 * This variable will be correct only when there's just
1310 * a single context, but all code using it is for hardware
1311 * that supports only one context.
1313 priv
->iw_mode
= vif
->type
;
1315 ctx
->is_active
= true;
1317 err
= iwl_set_mode(priv
, ctx
);
1319 if (!ctx
->always_active
)
1320 ctx
->is_active
= false;
1324 if (priv
->cfg
->bt_params
&& priv
->cfg
->bt_params
->advanced_bt_coexist
&&
1325 vif
->type
== NL80211_IFTYPE_ADHOC
) {
1327 * pretend to have high BT traffic as long as we
1328 * are operating in IBSS mode, as this will cause
1329 * the rate scaling etc. to behave as intended.
1331 priv
->bt_traffic_load
= IWL_BT_COEX_TRAFFIC_LOAD_HIGH
;
1337 int iwl_mac_add_interface(struct ieee80211_hw
*hw
, struct ieee80211_vif
*vif
)
1339 struct iwl_priv
*priv
= hw
->priv
;
1340 struct iwl_vif_priv
*vif_priv
= (void *)vif
->drv_priv
;
1341 struct iwl_rxon_context
*tmp
, *ctx
= NULL
;
1343 enum nl80211_iftype viftype
= ieee80211_vif_type_p2p(vif
);
1345 IWL_DEBUG_MAC80211(priv
, "enter: type %d, addr %pM\n",
1346 viftype
, vif
->addr
);
1348 mutex_lock(&priv
->mutex
);
1350 if (!iwl_is_ready_rf(priv
)) {
1351 IWL_WARN(priv
, "Try to add interface when device not ready\n");
1356 for_each_context(priv
, tmp
) {
1357 u32 possible_modes
=
1358 tmp
->interface_modes
| tmp
->exclusive_interface_modes
;
1361 /* check if this busy context is exclusive */
1362 if (tmp
->exclusive_interface_modes
&
1363 BIT(tmp
->vif
->type
)) {
1370 if (!(possible_modes
& BIT(viftype
)))
1373 /* have maybe usable context w/o interface */
1383 vif_priv
->ctx
= ctx
;
1386 err
= iwl_setup_interface(priv
, ctx
);
1391 priv
->iw_mode
= NL80211_IFTYPE_STATION
;
1393 mutex_unlock(&priv
->mutex
);
1395 IWL_DEBUG_MAC80211(priv
, "leave\n");
1399 static void iwl_teardown_interface(struct iwl_priv
*priv
,
1400 struct ieee80211_vif
*vif
,
1403 struct iwl_rxon_context
*ctx
= iwl_rxon_ctx_from_vif(vif
);
1405 lockdep_assert_held(&priv
->mutex
);
1407 if (priv
->scan_vif
== vif
) {
1408 iwl_scan_cancel_timeout(priv
, 200);
1409 iwl_force_scan_end(priv
);
1413 iwl_set_mode(priv
, ctx
);
1414 if (!ctx
->always_active
)
1415 ctx
->is_active
= false;
1419 * When removing the IBSS interface, overwrite the
1420 * BT traffic load with the stored one from the last
1421 * notification, if any. If this is a device that
1422 * doesn't implement this, this has no effect since
1423 * both values are the same and zero.
1425 if (vif
->type
== NL80211_IFTYPE_ADHOC
)
1426 priv
->bt_traffic_load
= priv
->last_bt_traffic_load
;
1429 void iwl_mac_remove_interface(struct ieee80211_hw
*hw
,
1430 struct ieee80211_vif
*vif
)
1432 struct iwl_priv
*priv
= hw
->priv
;
1433 struct iwl_rxon_context
*ctx
= iwl_rxon_ctx_from_vif(vif
);
1435 IWL_DEBUG_MAC80211(priv
, "enter\n");
1437 mutex_lock(&priv
->mutex
);
1439 WARN_ON(ctx
->vif
!= vif
);
1442 iwl_teardown_interface(priv
, vif
, false);
1444 mutex_unlock(&priv
->mutex
);
1446 IWL_DEBUG_MAC80211(priv
, "leave\n");
1450 int iwl_alloc_txq_mem(struct iwl_priv
*priv
)
1453 priv
->txq
= kzalloc(
1454 sizeof(struct iwl_tx_queue
) *
1455 priv
->cfg
->base_params
->num_of_queues
,
1458 IWL_ERR(priv
, "Not enough memory for txq\n");
1464 void iwl_free_txq_mem(struct iwl_priv
*priv
)
1470 #ifdef CONFIG_IWLWIFI_DEBUGFS
1472 #define IWL_TRAFFIC_DUMP_SIZE (IWL_TRAFFIC_ENTRY_SIZE * IWL_TRAFFIC_ENTRIES)
1474 void iwl_reset_traffic_log(struct iwl_priv
*priv
)
1476 priv
->tx_traffic_idx
= 0;
1477 priv
->rx_traffic_idx
= 0;
1478 if (priv
->tx_traffic
)
1479 memset(priv
->tx_traffic
, 0, IWL_TRAFFIC_DUMP_SIZE
);
1480 if (priv
->rx_traffic
)
1481 memset(priv
->rx_traffic
, 0, IWL_TRAFFIC_DUMP_SIZE
);
1484 int iwl_alloc_traffic_mem(struct iwl_priv
*priv
)
1486 u32 traffic_size
= IWL_TRAFFIC_DUMP_SIZE
;
1488 if (iwl_debug_level
& IWL_DL_TX
) {
1489 if (!priv
->tx_traffic
) {
1491 kzalloc(traffic_size
, GFP_KERNEL
);
1492 if (!priv
->tx_traffic
)
1496 if (iwl_debug_level
& IWL_DL_RX
) {
1497 if (!priv
->rx_traffic
) {
1499 kzalloc(traffic_size
, GFP_KERNEL
);
1500 if (!priv
->rx_traffic
)
1504 iwl_reset_traffic_log(priv
);
1508 void iwl_free_traffic_mem(struct iwl_priv
*priv
)
1510 kfree(priv
->tx_traffic
);
1511 priv
->tx_traffic
= NULL
;
1513 kfree(priv
->rx_traffic
);
1514 priv
->rx_traffic
= NULL
;
1517 void iwl_dbg_log_tx_data_frame(struct iwl_priv
*priv
,
1518 u16 length
, struct ieee80211_hdr
*header
)
1523 if (likely(!(iwl_debug_level
& IWL_DL_TX
)))
1526 if (!priv
->tx_traffic
)
1529 fc
= header
->frame_control
;
1530 if (ieee80211_is_data(fc
)) {
1531 len
= (length
> IWL_TRAFFIC_ENTRY_SIZE
)
1532 ? IWL_TRAFFIC_ENTRY_SIZE
: length
;
1533 memcpy((priv
->tx_traffic
+
1534 (priv
->tx_traffic_idx
* IWL_TRAFFIC_ENTRY_SIZE
)),
1536 priv
->tx_traffic_idx
=
1537 (priv
->tx_traffic_idx
+ 1) % IWL_TRAFFIC_ENTRIES
;
1541 void iwl_dbg_log_rx_data_frame(struct iwl_priv
*priv
,
1542 u16 length
, struct ieee80211_hdr
*header
)
1547 if (likely(!(iwl_debug_level
& IWL_DL_RX
)))
1550 if (!priv
->rx_traffic
)
1553 fc
= header
->frame_control
;
1554 if (ieee80211_is_data(fc
)) {
1555 len
= (length
> IWL_TRAFFIC_ENTRY_SIZE
)
1556 ? IWL_TRAFFIC_ENTRY_SIZE
: length
;
1557 memcpy((priv
->rx_traffic
+
1558 (priv
->rx_traffic_idx
* IWL_TRAFFIC_ENTRY_SIZE
)),
1560 priv
->rx_traffic_idx
=
1561 (priv
->rx_traffic_idx
+ 1) % IWL_TRAFFIC_ENTRIES
;
1565 const char *get_mgmt_string(int cmd
)
1568 IWL_CMD(MANAGEMENT_ASSOC_REQ
);
1569 IWL_CMD(MANAGEMENT_ASSOC_RESP
);
1570 IWL_CMD(MANAGEMENT_REASSOC_REQ
);
1571 IWL_CMD(MANAGEMENT_REASSOC_RESP
);
1572 IWL_CMD(MANAGEMENT_PROBE_REQ
);
1573 IWL_CMD(MANAGEMENT_PROBE_RESP
);
1574 IWL_CMD(MANAGEMENT_BEACON
);
1575 IWL_CMD(MANAGEMENT_ATIM
);
1576 IWL_CMD(MANAGEMENT_DISASSOC
);
1577 IWL_CMD(MANAGEMENT_AUTH
);
1578 IWL_CMD(MANAGEMENT_DEAUTH
);
1579 IWL_CMD(MANAGEMENT_ACTION
);
1586 const char *get_ctrl_string(int cmd
)
1589 IWL_CMD(CONTROL_BACK_REQ
);
1590 IWL_CMD(CONTROL_BACK
);
1591 IWL_CMD(CONTROL_PSPOLL
);
1592 IWL_CMD(CONTROL_RTS
);
1593 IWL_CMD(CONTROL_CTS
);
1594 IWL_CMD(CONTROL_ACK
);
1595 IWL_CMD(CONTROL_CFEND
);
1596 IWL_CMD(CONTROL_CFENDACK
);
1603 void iwl_clear_traffic_stats(struct iwl_priv
*priv
)
1605 memset(&priv
->tx_stats
, 0, sizeof(struct traffic_stats
));
1606 memset(&priv
->rx_stats
, 0, sizeof(struct traffic_stats
));
1610 * if CONFIG_IWLWIFI_DEBUGFS defined, iwl_update_stats function will
1611 * record all the MGMT, CTRL and DATA pkt for both TX and Rx pass.
1612 * Use debugFs to display the rx/rx_statistics
1613 * if CONFIG_IWLWIFI_DEBUGFS not being defined, then no MGMT and CTRL
1614 * information will be recorded, but DATA pkt still will be recorded
1615 * for the reason of iwl_led.c need to control the led blinking based on
1616 * number of tx and rx data.
1619 void iwl_update_stats(struct iwl_priv
*priv
, bool is_tx
, __le16 fc
, u16 len
)
1621 struct traffic_stats
*stats
;
1624 stats
= &priv
->tx_stats
;
1626 stats
= &priv
->rx_stats
;
1628 if (ieee80211_is_mgmt(fc
)) {
1629 switch (fc
& cpu_to_le16(IEEE80211_FCTL_STYPE
)) {
1630 case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ
):
1631 stats
->mgmt
[MANAGEMENT_ASSOC_REQ
]++;
1633 case cpu_to_le16(IEEE80211_STYPE_ASSOC_RESP
):
1634 stats
->mgmt
[MANAGEMENT_ASSOC_RESP
]++;
1636 case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ
):
1637 stats
->mgmt
[MANAGEMENT_REASSOC_REQ
]++;
1639 case cpu_to_le16(IEEE80211_STYPE_REASSOC_RESP
):
1640 stats
->mgmt
[MANAGEMENT_REASSOC_RESP
]++;
1642 case cpu_to_le16(IEEE80211_STYPE_PROBE_REQ
):
1643 stats
->mgmt
[MANAGEMENT_PROBE_REQ
]++;
1645 case cpu_to_le16(IEEE80211_STYPE_PROBE_RESP
):
1646 stats
->mgmt
[MANAGEMENT_PROBE_RESP
]++;
1648 case cpu_to_le16(IEEE80211_STYPE_BEACON
):
1649 stats
->mgmt
[MANAGEMENT_BEACON
]++;
1651 case cpu_to_le16(IEEE80211_STYPE_ATIM
):
1652 stats
->mgmt
[MANAGEMENT_ATIM
]++;
1654 case cpu_to_le16(IEEE80211_STYPE_DISASSOC
):
1655 stats
->mgmt
[MANAGEMENT_DISASSOC
]++;
1657 case cpu_to_le16(IEEE80211_STYPE_AUTH
):
1658 stats
->mgmt
[MANAGEMENT_AUTH
]++;
1660 case cpu_to_le16(IEEE80211_STYPE_DEAUTH
):
1661 stats
->mgmt
[MANAGEMENT_DEAUTH
]++;
1663 case cpu_to_le16(IEEE80211_STYPE_ACTION
):
1664 stats
->mgmt
[MANAGEMENT_ACTION
]++;
1667 } else if (ieee80211_is_ctl(fc
)) {
1668 switch (fc
& cpu_to_le16(IEEE80211_FCTL_STYPE
)) {
1669 case cpu_to_le16(IEEE80211_STYPE_BACK_REQ
):
1670 stats
->ctrl
[CONTROL_BACK_REQ
]++;
1672 case cpu_to_le16(IEEE80211_STYPE_BACK
):
1673 stats
->ctrl
[CONTROL_BACK
]++;
1675 case cpu_to_le16(IEEE80211_STYPE_PSPOLL
):
1676 stats
->ctrl
[CONTROL_PSPOLL
]++;
1678 case cpu_to_le16(IEEE80211_STYPE_RTS
):
1679 stats
->ctrl
[CONTROL_RTS
]++;
1681 case cpu_to_le16(IEEE80211_STYPE_CTS
):
1682 stats
->ctrl
[CONTROL_CTS
]++;
1684 case cpu_to_le16(IEEE80211_STYPE_ACK
):
1685 stats
->ctrl
[CONTROL_ACK
]++;
1687 case cpu_to_le16(IEEE80211_STYPE_CFEND
):
1688 stats
->ctrl
[CONTROL_CFEND
]++;
1690 case cpu_to_le16(IEEE80211_STYPE_CFENDACK
):
1691 stats
->ctrl
[CONTROL_CFENDACK
]++;
1697 stats
->data_bytes
+= len
;
1702 static void iwl_force_rf_reset(struct iwl_priv
*priv
)
1704 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
1707 if (!iwl_is_any_associated(priv
)) {
1708 IWL_DEBUG_SCAN(priv
, "force reset rejected: not associated\n");
1712 * There is no easy and better way to force reset the radio,
1713 * the only known method is switching channel which will force to
1714 * reset and tune the radio.
1715 * Use internal short scan (single channel) operation to should
1716 * achieve this objective.
1717 * Driver should reset the radio when number of consecutive missed
1718 * beacon, or any other uCode error condition detected.
1720 IWL_DEBUG_INFO(priv
, "perform radio reset.\n");
1721 iwl_internal_short_hw_scan(priv
);
1725 int iwl_force_reset(struct iwl_priv
*priv
, int mode
, bool external
)
1727 struct iwl_force_reset
*force_reset
;
1729 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
1732 if (mode
>= IWL_MAX_FORCE_RESET
) {
1733 IWL_DEBUG_INFO(priv
, "invalid reset request.\n");
1736 force_reset
= &priv
->force_reset
[mode
];
1737 force_reset
->reset_request_count
++;
1739 if (force_reset
->last_force_reset_jiffies
&&
1740 time_after(force_reset
->last_force_reset_jiffies
+
1741 force_reset
->reset_duration
, jiffies
)) {
1742 IWL_DEBUG_INFO(priv
, "force reset rejected\n");
1743 force_reset
->reset_reject_count
++;
1747 force_reset
->reset_success_count
++;
1748 force_reset
->last_force_reset_jiffies
= jiffies
;
1749 IWL_DEBUG_INFO(priv
, "perform force reset (%d)\n", mode
);
1752 iwl_force_rf_reset(priv
);
1756 * if the request is from external(ex: debugfs),
1757 * then always perform the request in regardless the module
1759 * if the request is from internal (uCode error or driver
1760 * detect failure), then fw_restart module parameter
1761 * need to be check before performing firmware reload
1763 if (!external
&& !priv
->cfg
->mod_params
->restart_fw
) {
1764 IWL_DEBUG_INFO(priv
, "Cancel firmware reload based on "
1765 "module parameter setting\n");
1768 IWL_ERR(priv
, "On demand firmware reload\n");
1769 iwlagn_fw_error(priv
, true);
1775 int iwl_mac_change_interface(struct ieee80211_hw
*hw
, struct ieee80211_vif
*vif
,
1776 enum nl80211_iftype newtype
, bool newp2p
)
1778 struct iwl_priv
*priv
= hw
->priv
;
1779 struct iwl_rxon_context
*ctx
= iwl_rxon_ctx_from_vif(vif
);
1780 struct iwl_rxon_context
*tmp
;
1781 u32 interface_modes
;
1784 newtype
= ieee80211_iftype_p2p(newtype
, newp2p
);
1786 mutex_lock(&priv
->mutex
);
1788 interface_modes
= ctx
->interface_modes
| ctx
->exclusive_interface_modes
;
1790 if (!(interface_modes
& BIT(newtype
))) {
1795 if (ctx
->exclusive_interface_modes
& BIT(newtype
)) {
1796 for_each_context(priv
, tmp
) {
1804 * The current mode switch would be exclusive, but
1805 * another context is active ... refuse the switch.
1813 iwl_teardown_interface(priv
, vif
, true);
1814 vif
->type
= newtype
;
1815 err
= iwl_setup_interface(priv
, ctx
);
1818 * We've switched internally, but submitting to the
1819 * device may have failed for some reason. Mask this
1820 * error, because otherwise mac80211 will not switch
1821 * (and set the interface type back) and we'll be
1822 * out of sync with it.
1827 mutex_unlock(&priv
->mutex
);
1832 * On every watchdog tick we check (latest) time stamp. If it does not
1833 * change during timeout period and queue is not empty we reset firmware.
1835 static int iwl_check_stuck_queue(struct iwl_priv
*priv
, int cnt
)
1837 struct iwl_tx_queue
*txq
= &priv
->txq
[cnt
];
1838 struct iwl_queue
*q
= &txq
->q
;
1839 unsigned long timeout
;
1842 if (q
->read_ptr
== q
->write_ptr
) {
1843 txq
->time_stamp
= jiffies
;
1847 timeout
= txq
->time_stamp
+
1848 msecs_to_jiffies(priv
->cfg
->base_params
->wd_timeout
);
1850 if (time_after(jiffies
, timeout
)) {
1851 IWL_ERR(priv
, "Queue %d stuck for %u ms.\n",
1852 q
->id
, priv
->cfg
->base_params
->wd_timeout
);
1853 ret
= iwl_force_reset(priv
, IWL_FW_RESET
, false);
1854 return (ret
== -EAGAIN
) ? 0 : 1;
1861 * Making watchdog tick be a quarter of timeout assure we will
1862 * discover the queue hung between timeout and 1.25*timeout
1864 #define IWL_WD_TICK(timeout) ((timeout) / 4)
1867 * Watchdog timer callback, we check each tx queue for stuck, if if hung
1868 * we reset the firmware. If everything is fine just rearm the timer.
1870 void iwl_bg_watchdog(unsigned long data
)
1872 struct iwl_priv
*priv
= (struct iwl_priv
*)data
;
1874 unsigned long timeout
;
1876 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
1879 timeout
= priv
->cfg
->base_params
->wd_timeout
;
1883 /* monitor and check for stuck cmd queue */
1884 if (iwl_check_stuck_queue(priv
, priv
->cmd_queue
))
1887 /* monitor and check for other stuck queues */
1888 if (iwl_is_any_associated(priv
)) {
1889 for (cnt
= 0; cnt
< priv
->hw_params
.max_txq_num
; cnt
++) {
1890 /* skip as we already checked the command queue */
1891 if (cnt
== priv
->cmd_queue
)
1893 if (iwl_check_stuck_queue(priv
, cnt
))
1898 mod_timer(&priv
->watchdog
, jiffies
+
1899 msecs_to_jiffies(IWL_WD_TICK(timeout
)));
1902 void iwl_setup_watchdog(struct iwl_priv
*priv
)
1904 unsigned int timeout
= priv
->cfg
->base_params
->wd_timeout
;
1907 mod_timer(&priv
->watchdog
,
1908 jiffies
+ msecs_to_jiffies(IWL_WD_TICK(timeout
)));
1910 del_timer(&priv
->watchdog
);
1914 * extended beacon time format
1915 * time in usec will be changed into a 32-bit value in extended:internal format
1916 * the extended part is the beacon counts
1917 * the internal part is the time in usec within one beacon interval
1919 u32
iwl_usecs_to_beacons(struct iwl_priv
*priv
, u32 usec
, u32 beacon_interval
)
1923 u32 interval
= beacon_interval
* TIME_UNIT
;
1925 if (!interval
|| !usec
)
1928 quot
= (usec
/ interval
) &
1929 (iwl_beacon_time_mask_high(priv
,
1930 priv
->hw_params
.beacon_time_tsf_bits
) >>
1931 priv
->hw_params
.beacon_time_tsf_bits
);
1932 rem
= (usec
% interval
) & iwl_beacon_time_mask_low(priv
,
1933 priv
->hw_params
.beacon_time_tsf_bits
);
1935 return (quot
<< priv
->hw_params
.beacon_time_tsf_bits
) + rem
;
1938 /* base is usually what we get from ucode with each received frame,
1939 * the same as HW timer counter counting down
1941 __le32
iwl_add_beacon_time(struct iwl_priv
*priv
, u32 base
,
1942 u32 addon
, u32 beacon_interval
)
1944 u32 base_low
= base
& iwl_beacon_time_mask_low(priv
,
1945 priv
->hw_params
.beacon_time_tsf_bits
);
1946 u32 addon_low
= addon
& iwl_beacon_time_mask_low(priv
,
1947 priv
->hw_params
.beacon_time_tsf_bits
);
1948 u32 interval
= beacon_interval
* TIME_UNIT
;
1949 u32 res
= (base
& iwl_beacon_time_mask_high(priv
,
1950 priv
->hw_params
.beacon_time_tsf_bits
)) +
1951 (addon
& iwl_beacon_time_mask_high(priv
,
1952 priv
->hw_params
.beacon_time_tsf_bits
));
1954 if (base_low
> addon_low
)
1955 res
+= base_low
- addon_low
;
1956 else if (base_low
< addon_low
) {
1957 res
+= interval
+ base_low
- addon_low
;
1958 res
+= (1 << priv
->hw_params
.beacon_time_tsf_bits
);
1960 res
+= (1 << priv
->hw_params
.beacon_time_tsf_bits
);
1962 return cpu_to_le32(res
);
1967 int iwl_pci_suspend(struct device
*device
)
1969 struct pci_dev
*pdev
= to_pci_dev(device
);
1970 struct iwl_priv
*priv
= pci_get_drvdata(pdev
);
1973 * This function is called when system goes into suspend state
1974 * mac80211 will call iwl_mac_stop() from the mac80211 suspend function
1975 * first but since iwl_mac_stop() has no knowledge of who the caller is,
1976 * it will not call apm_ops.stop() to stop the DMA operation.
1977 * Calling apm_ops.stop here to make sure we stop the DMA.
1984 int iwl_pci_resume(struct device
*device
)
1986 struct pci_dev
*pdev
= to_pci_dev(device
);
1987 struct iwl_priv
*priv
= pci_get_drvdata(pdev
);
1988 bool hw_rfkill
= false;
1991 * We disable the RETRY_TIMEOUT register (0x41) to keep
1992 * PCI Tx retries from interfering with C3 CPU state.
1994 pci_write_config_byte(pdev
, PCI_CFG_RETRY_TIMEOUT
, 0x00);
1996 iwl_enable_interrupts(priv
);
1998 if (!(iwl_read32(priv
, CSR_GP_CNTRL
) &
1999 CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW
))
2003 set_bit(STATUS_RF_KILL_HW
, &priv
->status
);
2005 clear_bit(STATUS_RF_KILL_HW
, &priv
->status
);
2007 wiphy_rfkill_set_hw_state(priv
->hw
->wiphy
, hw_rfkill
);
2012 const struct dev_pm_ops iwl_pm_ops
= {
2013 .suspend
= iwl_pci_suspend
,
2014 .resume
= iwl_pci_resume
,
2015 .freeze
= iwl_pci_suspend
,
2016 .thaw
= iwl_pci_resume
,
2017 .poweroff
= iwl_pci_suspend
,
2018 .restore
= iwl_pci_resume
,
2021 #endif /* CONFIG_PM */