1 /******************************************************************************
5 * Copyright(c) 2008 Intel Corporation. All rights reserved.
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of version 2 of the GNU General Public License as
9 * published by the Free Software Foundation.
11 * This program is distributed in the hope that it will be useful, but
12 * WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 * General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
21 * The full GNU General Public License is included in this distribution
22 * in the file called LICENSE.GPL.
24 * Contact Information:
25 * Tomas Winkler <tomas.winkler@intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27 *****************************************************************************/
29 #include <linux/kernel.h>
30 #include <linux/module.h>
31 #include <linux/version.h>
32 #include <net/mac80211.h>
34 struct iwl_priv
; /* FIXME: remove */
35 #include "iwl-debug.h"
36 #include "iwl-eeprom.h"
37 #include "iwl-dev.h" /* FIXME: remove */
40 #include "iwl-rfkill.h"
41 #include "iwl-power.h"
44 MODULE_DESCRIPTION("iwl core");
45 MODULE_VERSION(IWLWIFI_VERSION
);
46 MODULE_AUTHOR(DRV_COPYRIGHT
);
47 MODULE_LICENSE("GPL");
49 #ifdef CONFIG_IWLWIFI_DEBUG
51 EXPORT_SYMBOL(iwl_debug_level
);
54 #define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \
55 [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \
56 IWL_RATE_SISO_##s##M_PLCP, \
57 IWL_RATE_MIMO2_##s##M_PLCP,\
58 IWL_RATE_MIMO3_##s##M_PLCP,\
59 IWL_RATE_##r##M_IEEE, \
60 IWL_RATE_##ip##M_INDEX, \
61 IWL_RATE_##in##M_INDEX, \
62 IWL_RATE_##rp##M_INDEX, \
63 IWL_RATE_##rn##M_INDEX, \
64 IWL_RATE_##pp##M_INDEX, \
65 IWL_RATE_##np##M_INDEX }
69 * rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate
71 * If there isn't a valid next or previous rate then INV is used which
72 * maps to IWL_RATE_INVALID
75 const struct iwl4965_rate_info iwl4965_rates
[IWL_RATE_COUNT
] = {
76 IWL_DECLARE_RATE_INFO(1, INV
, INV
, 2, INV
, 2, INV
, 2), /* 1mbps */
77 IWL_DECLARE_RATE_INFO(2, INV
, 1, 5, 1, 5, 1, 5), /* 2mbps */
78 IWL_DECLARE_RATE_INFO(5, INV
, 2, 6, 2, 11, 2, 11), /*5.5mbps */
79 IWL_DECLARE_RATE_INFO(11, INV
, 9, 12, 9, 12, 5, 18), /* 11mbps */
80 IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11), /* 6mbps */
81 IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11), /* 9mbps */
82 IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18), /* 12mbps */
83 IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24), /* 18mbps */
84 IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36), /* 24mbps */
85 IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48), /* 36mbps */
86 IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54), /* 48mbps */
87 IWL_DECLARE_RATE_INFO(54, 54, 48, INV
, 48, INV
, 48, INV
),/* 54mbps */
88 IWL_DECLARE_RATE_INFO(60, 60, 48, INV
, 48, INV
, 48, INV
),/* 60mbps */
89 /* FIXME:RS: ^^ should be INV (legacy) */
91 EXPORT_SYMBOL(iwl4965_rates
);
93 /* This function both allocates and initializes hw and priv. */
94 struct ieee80211_hw
*iwl_alloc_all(struct iwl_cfg
*cfg
,
95 struct ieee80211_ops
*hw_ops
)
97 struct iwl_priv
*priv
;
99 /* mac80211 allocates memory for this device instance, including
100 * space for this driver's private structure */
101 struct ieee80211_hw
*hw
=
102 ieee80211_alloc_hw(sizeof(struct iwl_priv
), hw_ops
);
104 IWL_ERROR("Can not allocate network device\n");
114 EXPORT_SYMBOL(iwl_alloc_all
);
116 void iwl_hw_detect(struct iwl_priv
*priv
)
118 priv
->hw_rev
= _iwl_read32(priv
, CSR_HW_REV
);
119 priv
->hw_wa_rev
= _iwl_read32(priv
, CSR_HW_REV_WA_REG
);
120 pci_read_config_byte(priv
->pci_dev
, PCI_REVISION_ID
, &priv
->rev_id
);
122 EXPORT_SYMBOL(iwl_hw_detect
);
125 * iwlcore_clear_stations_table - Clear the driver's station table
127 * NOTE: This does not clear or otherwise alter the device's station table.
129 void iwlcore_clear_stations_table(struct iwl_priv
*priv
)
133 spin_lock_irqsave(&priv
->sta_lock
, flags
);
135 priv
->num_stations
= 0;
136 memset(priv
->stations
, 0, sizeof(priv
->stations
));
138 spin_unlock_irqrestore(&priv
->sta_lock
, flags
);
140 EXPORT_SYMBOL(iwlcore_clear_stations_table
);
142 void iwl_reset_qos(struct iwl_priv
*priv
)
151 spin_lock_irqsave(&priv
->lock
, flags
);
152 priv
->qos_data
.qos_active
= 0;
154 if (priv
->iw_mode
== IEEE80211_IF_TYPE_IBSS
) {
155 if (priv
->qos_data
.qos_enable
)
156 priv
->qos_data
.qos_active
= 1;
157 if (!(priv
->active_rate
& 0xfff0)) {
161 } else if (priv
->iw_mode
== IEEE80211_IF_TYPE_AP
) {
162 if (priv
->qos_data
.qos_enable
)
163 priv
->qos_data
.qos_active
= 1;
164 } else if (!(priv
->staging_rxon
.flags
& RXON_FLG_SHORT_SLOT_MSK
)) {
169 if (priv
->qos_data
.qos_active
)
172 priv
->qos_data
.def_qos_parm
.ac
[0].cw_min
= cpu_to_le16(cw_min
);
173 priv
->qos_data
.def_qos_parm
.ac
[0].cw_max
= cpu_to_le16(cw_max
);
174 priv
->qos_data
.def_qos_parm
.ac
[0].aifsn
= aifs
;
175 priv
->qos_data
.def_qos_parm
.ac
[0].edca_txop
= 0;
176 priv
->qos_data
.def_qos_parm
.ac
[0].reserved1
= 0;
178 if (priv
->qos_data
.qos_active
) {
180 priv
->qos_data
.def_qos_parm
.ac
[i
].cw_min
= cpu_to_le16(cw_min
);
181 priv
->qos_data
.def_qos_parm
.ac
[i
].cw_max
= cpu_to_le16(cw_max
);
182 priv
->qos_data
.def_qos_parm
.ac
[i
].aifsn
= 7;
183 priv
->qos_data
.def_qos_parm
.ac
[i
].edca_txop
= 0;
184 priv
->qos_data
.def_qos_parm
.ac
[i
].reserved1
= 0;
187 priv
->qos_data
.def_qos_parm
.ac
[i
].cw_min
=
188 cpu_to_le16((cw_min
+ 1) / 2 - 1);
189 priv
->qos_data
.def_qos_parm
.ac
[i
].cw_max
=
191 priv
->qos_data
.def_qos_parm
.ac
[i
].aifsn
= 2;
193 priv
->qos_data
.def_qos_parm
.ac
[i
].edca_txop
=
196 priv
->qos_data
.def_qos_parm
.ac
[i
].edca_txop
=
198 priv
->qos_data
.def_qos_parm
.ac
[i
].reserved1
= 0;
201 priv
->qos_data
.def_qos_parm
.ac
[i
].cw_min
=
202 cpu_to_le16((cw_min
+ 1) / 4 - 1);
203 priv
->qos_data
.def_qos_parm
.ac
[i
].cw_max
=
204 cpu_to_le16((cw_max
+ 1) / 2 - 1);
205 priv
->qos_data
.def_qos_parm
.ac
[i
].aifsn
= 2;
206 priv
->qos_data
.def_qos_parm
.ac
[i
].reserved1
= 0;
208 priv
->qos_data
.def_qos_parm
.ac
[i
].edca_txop
=
211 priv
->qos_data
.def_qos_parm
.ac
[i
].edca_txop
=
214 for (i
= 1; i
< 4; i
++) {
215 priv
->qos_data
.def_qos_parm
.ac
[i
].cw_min
=
217 priv
->qos_data
.def_qos_parm
.ac
[i
].cw_max
=
219 priv
->qos_data
.def_qos_parm
.ac
[i
].aifsn
= aifs
;
220 priv
->qos_data
.def_qos_parm
.ac
[i
].edca_txop
= 0;
221 priv
->qos_data
.def_qos_parm
.ac
[i
].reserved1
= 0;
224 IWL_DEBUG_QOS("set QoS to default \n");
226 spin_unlock_irqrestore(&priv
->lock
, flags
);
228 EXPORT_SYMBOL(iwl_reset_qos
);
230 #ifdef CONFIG_IWL4965_HT
231 static void iwlcore_init_ht_hw_capab(const struct iwl_priv
*priv
,
232 struct ieee80211_ht_info
*ht_info
,
233 enum ieee80211_band band
)
236 memset(ht_info
->supp_mcs_set
, 0, 16);
238 ht_info
->ht_supported
= 1;
240 if (priv
->hw_params
.fat_channel
& BIT(band
)) {
241 ht_info
->cap
|= (u16
)IEEE80211_HT_CAP_SUP_WIDTH
;
242 ht_info
->cap
|= (u16
)IEEE80211_HT_CAP_SGI_40
;
243 ht_info
->supp_mcs_set
[4] = 0x01;
245 ht_info
->cap
|= (u16
)IEEE80211_HT_CAP_GRN_FLD
;
246 ht_info
->cap
|= (u16
)IEEE80211_HT_CAP_SGI_20
;
247 ht_info
->cap
|= (u16
)(IEEE80211_HT_CAP_MIMO_PS
&
248 (IWL_MIMO_PS_NONE
<< 2));
250 if (priv
->cfg
->mod_params
->amsdu_size_8K
)
251 ht_info
->cap
|= (u16
)IEEE80211_HT_CAP_MAX_AMSDU
;
253 ht_info
->ampdu_factor
= CFG_HT_RX_AMPDU_FACTOR_DEF
;
254 ht_info
->ampdu_density
= CFG_HT_MPDU_DENSITY_DEF
;
256 ht_info
->supp_mcs_set
[0] = 0xFF;
257 if (priv
->hw_params
.tx_chains_num
>= 2)
258 ht_info
->supp_mcs_set
[1] = 0xFF;
259 if (priv
->hw_params
.tx_chains_num
>= 3)
260 ht_info
->supp_mcs_set
[2] = 0xFF;
262 #endif /* CONFIG_IWL4965_HT */
264 static void iwlcore_init_hw_rates(struct iwl_priv
*priv
,
265 struct ieee80211_rate
*rates
)
269 for (i
= 0; i
< IWL_RATE_COUNT
; i
++) {
270 rates
[i
].bitrate
= iwl4965_rates
[i
].ieee
* 5;
271 rates
[i
].hw_value
= i
; /* Rate scaling will work on indexes */
272 rates
[i
].hw_value_short
= i
;
274 if ((i
> IWL_LAST_OFDM_RATE
) || (i
< IWL_FIRST_OFDM_RATE
)) {
276 * If CCK != 1M then set short preamble rate flag.
279 (iwl4965_rates
[i
].plcp
== IWL_RATE_1M_PLCP
) ?
280 0 : IEEE80211_RATE_SHORT_PREAMBLE
;
286 * iwlcore_init_geos - Initialize mac80211's geo/channel info based from eeprom
288 static int iwlcore_init_geos(struct iwl_priv
*priv
)
290 struct iwl_channel_info
*ch
;
291 struct ieee80211_supported_band
*sband
;
292 struct ieee80211_channel
*channels
;
293 struct ieee80211_channel
*geo_ch
;
294 struct ieee80211_rate
*rates
;
297 if (priv
->bands
[IEEE80211_BAND_2GHZ
].n_bitrates
||
298 priv
->bands
[IEEE80211_BAND_5GHZ
].n_bitrates
) {
299 IWL_DEBUG_INFO("Geography modes already initialized.\n");
300 set_bit(STATUS_GEO_CONFIGURED
, &priv
->status
);
304 channels
= kzalloc(sizeof(struct ieee80211_channel
) *
305 priv
->channel_count
, GFP_KERNEL
);
309 rates
= kzalloc((sizeof(struct ieee80211_rate
) * (IWL_RATE_COUNT
+ 1)),
316 /* 5.2GHz channels start after the 2.4GHz channels */
317 sband
= &priv
->bands
[IEEE80211_BAND_5GHZ
];
318 sband
->channels
= &channels
[ARRAY_SIZE(iwl_eeprom_band_1
)];
320 sband
->bitrates
= &rates
[IWL_FIRST_OFDM_RATE
];
321 sband
->n_bitrates
= IWL_RATE_COUNT
- IWL_FIRST_OFDM_RATE
;
323 iwlcore_init_ht_hw_capab(priv
, &sband
->ht_info
, IEEE80211_BAND_5GHZ
);
325 sband
= &priv
->bands
[IEEE80211_BAND_2GHZ
];
326 sband
->channels
= channels
;
328 sband
->bitrates
= rates
;
329 sband
->n_bitrates
= IWL_RATE_COUNT
;
331 iwlcore_init_ht_hw_capab(priv
, &sband
->ht_info
, IEEE80211_BAND_2GHZ
);
333 priv
->ieee_channels
= channels
;
334 priv
->ieee_rates
= rates
;
336 iwlcore_init_hw_rates(priv
, rates
);
338 for (i
= 0; i
< priv
->channel_count
; i
++) {
339 ch
= &priv
->channel_info
[i
];
341 /* FIXME: might be removed if scan is OK */
342 if (!is_channel_valid(ch
))
345 if (is_channel_a_band(ch
))
346 sband
= &priv
->bands
[IEEE80211_BAND_5GHZ
];
348 sband
= &priv
->bands
[IEEE80211_BAND_2GHZ
];
350 geo_ch
= &sband
->channels
[sband
->n_channels
++];
352 geo_ch
->center_freq
=
353 ieee80211_channel_to_frequency(ch
->channel
);
354 geo_ch
->max_power
= ch
->max_power_avg
;
355 geo_ch
->max_antenna_gain
= 0xff;
356 geo_ch
->hw_value
= ch
->channel
;
358 if (is_channel_valid(ch
)) {
359 if (!(ch
->flags
& EEPROM_CHANNEL_IBSS
))
360 geo_ch
->flags
|= IEEE80211_CHAN_NO_IBSS
;
362 if (!(ch
->flags
& EEPROM_CHANNEL_ACTIVE
))
363 geo_ch
->flags
|= IEEE80211_CHAN_PASSIVE_SCAN
;
365 if (ch
->flags
& EEPROM_CHANNEL_RADAR
)
366 geo_ch
->flags
|= IEEE80211_CHAN_RADAR
;
368 if (ch
->max_power_avg
> priv
->max_channel_txpower_limit
)
369 priv
->max_channel_txpower_limit
=
372 geo_ch
->flags
|= IEEE80211_CHAN_DISABLED
;
375 /* Save flags for reg domain usage */
376 geo_ch
->orig_flags
= geo_ch
->flags
;
378 IWL_DEBUG_INFO("Channel %d Freq=%d[%sGHz] %s flag=0%X\n",
379 ch
->channel
, geo_ch
->center_freq
,
380 is_channel_a_band(ch
) ? "5.2" : "2.4",
381 geo_ch
->flags
& IEEE80211_CHAN_DISABLED
?
382 "restricted" : "valid",
386 if ((priv
->bands
[IEEE80211_BAND_5GHZ
].n_channels
== 0) &&
387 priv
->cfg
->sku
& IWL_SKU_A
) {
388 printk(KERN_INFO DRV_NAME
389 ": Incorrectly detected BG card as ABG. Please send "
390 "your PCI ID 0x%04X:0x%04X to maintainer.\n",
391 priv
->pci_dev
->device
, priv
->pci_dev
->subsystem_device
);
392 priv
->cfg
->sku
&= ~IWL_SKU_A
;
395 printk(KERN_INFO DRV_NAME
396 ": Tunable channels: %d 802.11bg, %d 802.11a channels\n",
397 priv
->bands
[IEEE80211_BAND_2GHZ
].n_channels
,
398 priv
->bands
[IEEE80211_BAND_5GHZ
].n_channels
);
400 if (priv
->bands
[IEEE80211_BAND_2GHZ
].n_channels
)
401 priv
->hw
->wiphy
->bands
[IEEE80211_BAND_2GHZ
] =
402 &priv
->bands
[IEEE80211_BAND_2GHZ
];
403 if (priv
->bands
[IEEE80211_BAND_5GHZ
].n_channels
)
404 priv
->hw
->wiphy
->bands
[IEEE80211_BAND_5GHZ
] =
405 &priv
->bands
[IEEE80211_BAND_5GHZ
];
407 set_bit(STATUS_GEO_CONFIGURED
, &priv
->status
);
413 * iwlcore_free_geos - undo allocations in iwlcore_init_geos
415 void iwlcore_free_geos(struct iwl_priv
*priv
)
417 kfree(priv
->ieee_channels
);
418 kfree(priv
->ieee_rates
);
419 clear_bit(STATUS_GEO_CONFIGURED
, &priv
->status
);
421 EXPORT_SYMBOL(iwlcore_free_geos
);
423 #ifdef CONFIG_IWL4965_HT
424 static u8
is_single_rx_stream(struct iwl_priv
*priv
)
426 return !priv
->current_ht_config
.is_ht
||
427 ((priv
->current_ht_config
.supp_mcs_set
[1] == 0) &&
428 (priv
->current_ht_config
.supp_mcs_set
[2] == 0)) ||
429 priv
->ps_mode
== IWL_MIMO_PS_STATIC
;
432 static inline u8
is_single_rx_stream(struct iwl_priv
*priv
)
436 #endif /*CONFIG_IWL4965_HT */
439 * Determine how many receiver/antenna chains to use.
440 * More provides better reception via diversity. Fewer saves power.
441 * MIMO (dual stream) requires at least 2, but works better with 3.
442 * This does not determine *which* chains to use, just how many.
444 static int iwlcore_get_rx_chain_counter(struct iwl_priv
*priv
,
445 u8
*idle_state
, u8
*rx_state
)
447 u8 is_single
= is_single_rx_stream(priv
);
448 u8 is_cam
= test_bit(STATUS_POWER_PMI
, &priv
->status
) ? 0 : 1;
450 /* # of Rx chains to use when expecting MIMO. */
451 if (is_single
|| (!is_cam
&& (priv
->ps_mode
== IWL_MIMO_PS_STATIC
)))
456 /* # Rx chains when idling and maybe trying to save power */
457 switch (priv
->ps_mode
) {
458 case IWL_MIMO_PS_STATIC
:
459 case IWL_MIMO_PS_DYNAMIC
:
460 *idle_state
= (is_cam
) ? 2 : 1;
462 case IWL_MIMO_PS_NONE
:
463 *idle_state
= (is_cam
) ? *rx_state
: 1;
474 * iwl_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
476 * Selects how many and which Rx receivers/antennas/chains to use.
477 * This should not be used for scan command ... it puts data in wrong place.
479 void iwl_set_rxon_chain(struct iwl_priv
*priv
)
481 u8 is_single
= is_single_rx_stream(priv
);
482 u8 idle_state
, rx_state
;
484 priv
->staging_rxon
.rx_chain
= 0;
485 rx_state
= idle_state
= 3;
487 /* Tell uCode which antennas are actually connected.
488 * Before first association, we assume all antennas are connected.
489 * Just after first association, iwl_chain_noise_calibration()
490 * checks which antennas actually *are* connected. */
491 priv
->staging_rxon
.rx_chain
|=
492 cpu_to_le16(priv
->hw_params
.valid_rx_ant
<<
493 RXON_RX_CHAIN_VALID_POS
);
495 /* How many receivers should we use? */
496 iwlcore_get_rx_chain_counter(priv
, &idle_state
, &rx_state
);
497 priv
->staging_rxon
.rx_chain
|=
498 cpu_to_le16(rx_state
<< RXON_RX_CHAIN_MIMO_CNT_POS
);
499 priv
->staging_rxon
.rx_chain
|=
500 cpu_to_le16(idle_state
<< RXON_RX_CHAIN_CNT_POS
);
502 if (!is_single
&& (rx_state
>= 2) &&
503 !test_bit(STATUS_POWER_PMI
, &priv
->status
))
504 priv
->staging_rxon
.rx_chain
|= RXON_RX_CHAIN_MIMO_FORCE_MSK
;
506 priv
->staging_rxon
.rx_chain
&= ~RXON_RX_CHAIN_MIMO_FORCE_MSK
;
508 IWL_DEBUG_ASSOC("rx chain %X\n", priv
->staging_rxon
.rx_chain
);
510 EXPORT_SYMBOL(iwl_set_rxon_chain
);
513 * iwlcore_set_rxon_channel - Set the phymode and channel values in staging RXON
514 * @phymode: MODE_IEEE80211A sets to 5.2GHz; all else set to 2.4GHz
515 * @channel: Any channel valid for the requested phymode
517 * In addition to setting the staging RXON, priv->phymode is also set.
519 * NOTE: Does not commit to the hardware; it sets appropriate bit fields
520 * in the staging RXON flag structure based on the phymode
522 int iwl_set_rxon_channel(struct iwl_priv
*priv
,
523 enum ieee80211_band band
,
526 if (!iwl_get_channel_info(priv
, band
, channel
)) {
527 IWL_DEBUG_INFO("Could not set channel to %d [%d]\n",
532 if ((le16_to_cpu(priv
->staging_rxon
.channel
) == channel
) &&
533 (priv
->band
== band
))
536 priv
->staging_rxon
.channel
= cpu_to_le16(channel
);
537 if (band
== IEEE80211_BAND_5GHZ
)
538 priv
->staging_rxon
.flags
&= ~RXON_FLG_BAND_24G_MSK
;
540 priv
->staging_rxon
.flags
|= RXON_FLG_BAND_24G_MSK
;
544 IWL_DEBUG_INFO("Staging channel set to %d [%d]\n", channel
, band
);
548 EXPORT_SYMBOL(iwl_set_rxon_channel
);
550 static void iwlcore_init_hw(struct iwl_priv
*priv
)
552 struct ieee80211_hw
*hw
= priv
->hw
;
553 hw
->rate_control_algorithm
= "iwl-4965-rs";
555 /* Tell mac80211 and its clients (e.g. Wireless Extensions)
556 * the range of signal quality values that we'll provide.
557 * Negative values for level/noise indicate that we'll provide dBm.
558 * For WE, at least, non-0 values here *enable* display of values
559 * in app (iwconfig). */
560 hw
->max_rssi
= -20; /* signal level, negative indicates dBm */
561 hw
->max_noise
= -20; /* noise level, negative indicates dBm */
562 hw
->max_signal
= 100; /* link quality indication (%) */
564 /* Tell mac80211 our Tx characteristics */
565 hw
->flags
= IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE
;
567 /* Default value; 4 EDCA QOS priorities */
569 #ifdef CONFIG_IWL4965_HT
570 /* Enhanced value; more queues, to support 11n aggregation */
571 hw
->ampdu_queues
= 12;
572 #endif /* CONFIG_IWL4965_HT */
575 static int iwlcore_init_drv(struct iwl_priv
*priv
)
580 priv
->retry_rate
= 1;
581 priv
->ibss_beacon
= NULL
;
583 spin_lock_init(&priv
->lock
);
584 spin_lock_init(&priv
->power_data
.lock
);
585 spin_lock_init(&priv
->sta_lock
);
586 spin_lock_init(&priv
->hcmd_lock
);
587 spin_lock_init(&priv
->lq_mngr
.lock
);
589 for (i
= 0; i
< IWL_IBSS_MAC_HASH_SIZE
; i
++)
590 INIT_LIST_HEAD(&priv
->ibss_mac_hash
[i
]);
592 INIT_LIST_HEAD(&priv
->free_frames
);
594 mutex_init(&priv
->mutex
);
596 /* Clear the driver's (not device's) station table */
597 iwlcore_clear_stations_table(priv
);
599 priv
->data_retry_limit
= -1;
600 priv
->ieee_channels
= NULL
;
601 priv
->ieee_rates
= NULL
;
602 priv
->band
= IEEE80211_BAND_2GHZ
;
604 priv
->iw_mode
= IEEE80211_IF_TYPE_STA
;
606 priv
->use_ant_b_for_management_frame
= 1; /* start with ant B */
607 priv
->ps_mode
= IWL_MIMO_PS_NONE
;
609 /* Choose which receivers/antennas to use */
610 iwl_set_rxon_chain(priv
);
614 priv
->qos_data
.qos_active
= 0;
615 priv
->qos_data
.qos_cap
.val
= 0;
617 iwl_set_rxon_channel(priv
, IEEE80211_BAND_2GHZ
, 6);
619 priv
->rates_mask
= IWL_RATES_MASK
;
620 /* If power management is turned on, default to AC mode */
621 priv
->power_mode
= IWL_POWER_AC
;
622 priv
->user_txpower_limit
= IWL_DEFAULT_TX_POWER
;
624 ret
= iwl_init_channel_map(priv
);
626 IWL_ERROR("initializing regulatory failed: %d\n", ret
);
630 ret
= iwlcore_init_geos(priv
);
632 IWL_ERROR("initializing geos failed: %d\n", ret
);
633 goto err_free_channel_map
;
636 ret
= ieee80211_register_hw(priv
->hw
);
638 IWL_ERROR("Failed to register network device (error %d)\n",
643 priv
->hw
->conf
.beacon_int
= 100;
644 priv
->mac80211_registered
= 1;
649 iwlcore_free_geos(priv
);
650 err_free_channel_map
:
651 iwl_free_channel_map(priv
);
656 int iwl_setup(struct iwl_priv
*priv
)
659 iwlcore_init_hw(priv
);
660 ret
= iwlcore_init_drv(priv
);
663 EXPORT_SYMBOL(iwl_setup
);
665 /* Low level driver call this function to update iwlcore with
668 int iwlcore_low_level_notify(struct iwl_priv
*priv
,
669 enum iwlcore_card_notify notify
)
673 case IWLCORE_INIT_EVT
:
674 ret
= iwl_rfkill_init(priv
);
676 IWL_ERROR("Unable to initialize RFKILL system. "
677 "Ignoring error: %d\n", ret
);
678 iwl_power_initialize(priv
);
680 case IWLCORE_START_EVT
:
681 iwl_power_update_mode(priv
, 1);
683 case IWLCORE_STOP_EVT
:
685 case IWLCORE_REMOVE_EVT
:
686 iwl_rfkill_unregister(priv
);
692 EXPORT_SYMBOL(iwlcore_low_level_notify
);
694 int iwl_send_statistics_request(struct iwl_priv
*priv
, u8 flags
)
697 struct iwl_host_cmd cmd
= {
698 .id
= REPLY_STATISTICS_CMD
,
700 .len
= sizeof(stat_flags
),
701 .data
= (u8
*) &stat_flags
,
703 return iwl_send_cmd(priv
, &cmd
);
705 EXPORT_SYMBOL(iwl_send_statistics_request
);
708 * iwl_verify_inst_sparse - verify runtime uCode image in card vs. host,
709 * using sample data 100 bytes apart. If these sample points are good,
710 * it's a pretty good bet that everything between them is good, too.
712 static int iwlcore_verify_inst_sparse(struct iwl_priv
*priv
, __le32
*image
, u32 len
)
719 IWL_DEBUG_INFO("ucode inst image size is %u\n", len
);
721 ret
= iwl_grab_nic_access(priv
);
725 for (i
= 0; i
< len
; i
+= 100, image
+= 100/sizeof(u32
)) {
726 /* read data comes through single port, auto-incr addr */
727 /* NOTE: Use the debugless read so we don't flood kernel log
728 * if IWL_DL_IO is set */
729 iwl_write_direct32(priv
, HBUS_TARG_MEM_RADDR
,
730 i
+ RTC_INST_LOWER_BOUND
);
731 val
= _iwl_read_direct32(priv
, HBUS_TARG_MEM_RDAT
);
732 if (val
!= le32_to_cpu(*image
)) {
740 iwl_release_nic_access(priv
);
746 * iwlcore_verify_inst_full - verify runtime uCode image in card vs. host,
747 * looking at all data.
749 static int iwl_verify_inst_full(struct iwl_priv
*priv
, __le32
*image
,
757 IWL_DEBUG_INFO("ucode inst image size is %u\n", len
);
759 ret
= iwl_grab_nic_access(priv
);
763 iwl_write_direct32(priv
, HBUS_TARG_MEM_RADDR
, RTC_INST_LOWER_BOUND
);
766 for (; len
> 0; len
-= sizeof(u32
), image
++) {
767 /* read data comes through single port, auto-incr addr */
768 /* NOTE: Use the debugless read so we don't flood kernel log
769 * if IWL_DL_IO is set */
770 val
= _iwl_read_direct32(priv
, HBUS_TARG_MEM_RDAT
);
771 if (val
!= le32_to_cpu(*image
)) {
772 IWL_ERROR("uCode INST section is invalid at "
773 "offset 0x%x, is 0x%x, s/b 0x%x\n",
774 save_len
- len
, val
, le32_to_cpu(*image
));
782 iwl_release_nic_access(priv
);
786 ("ucode image in INSTRUCTION memory is good\n");
792 * iwl_verify_ucode - determine which instruction image is in SRAM,
793 * and verify its contents
795 int iwl_verify_ucode(struct iwl_priv
*priv
)
802 image
= (__le32
*)priv
->ucode_boot
.v_addr
;
803 len
= priv
->ucode_boot
.len
;
804 ret
= iwlcore_verify_inst_sparse(priv
, image
, len
);
806 IWL_DEBUG_INFO("Bootstrap uCode is good in inst SRAM\n");
811 image
= (__le32
*)priv
->ucode_init
.v_addr
;
812 len
= priv
->ucode_init
.len
;
813 ret
= iwlcore_verify_inst_sparse(priv
, image
, len
);
815 IWL_DEBUG_INFO("Initialize uCode is good in inst SRAM\n");
819 /* Try runtime/protocol */
820 image
= (__le32
*)priv
->ucode_code
.v_addr
;
821 len
= priv
->ucode_code
.len
;
822 ret
= iwlcore_verify_inst_sparse(priv
, image
, len
);
824 IWL_DEBUG_INFO("Runtime uCode is good in inst SRAM\n");
828 IWL_ERROR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
830 /* Since nothing seems to match, show first several data entries in
831 * instruction SRAM, so maybe visual inspection will give a clue.
832 * Selection of bootstrap image (vs. other images) is arbitrary. */
833 image
= (__le32
*)priv
->ucode_boot
.v_addr
;
834 len
= priv
->ucode_boot
.len
;
835 ret
= iwl_verify_inst_full(priv
, image
, len
);
839 EXPORT_SYMBOL(iwl_verify_ucode
);