iwlwifi: move eeprom pointer from iwl_priv to iwl_shared
[deliverable/linux.git] / drivers / net / wireless / iwlwifi / iwl-dev.h
1 /******************************************************************************
2 *
3 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
17 *
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
20 *
21 * Contact Information:
22 * Intel Linux Wireless <ilw@linux.intel.com>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
24 *
25 *****************************************************************************/
26 /*
27 * Please use this file (iwl-dev.h) for driver implementation definitions.
28 * Please use iwl-commands.h for uCode API definitions.
29 */
30
31 #ifndef __iwl_dev_h__
32 #define __iwl_dev_h__
33
34 #include <linux/interrupt.h>
35 #include <linux/kernel.h>
36 #include <linux/wait.h>
37 #include <linux/leds.h>
38 #include <linux/slab.h>
39 #include <net/ieee80211_radiotap.h>
40
41 #include "iwl-eeprom.h"
42 #include "iwl-csr.h"
43 #include "iwl-prph.h"
44 #include "iwl-debug.h"
45 #include "iwl-agn-hw.h"
46 #include "iwl-led.h"
47 #include "iwl-power.h"
48 #include "iwl-agn-rs.h"
49 #include "iwl-agn-tt.h"
50 #include "iwl-bus.h"
51 #include "iwl-trans.h"
52 #include "iwl-shared.h"
53
54 struct iwl_tx_queue;
55
56 /* CT-KILL constants */
57 #define CT_KILL_THRESHOLD_LEGACY 110 /* in Celsius */
58 #define CT_KILL_THRESHOLD 114 /* in Celsius */
59 #define CT_KILL_EXIT_THRESHOLD 95 /* in Celsius */
60
61 /* Default noise level to report when noise measurement is not available.
62 * This may be because we're:
63 * 1) Not associated no beacon statistics being sent to driver)
64 * 2) Scanning (noise measurement does not apply to associated channel)
65 * Use default noise value of -127 ... this is below the range of measurable
66 * Rx dBm for all agn devices, so it can indicate "unmeasurable" to user.
67 * Also, -127 works better than 0 when averaging frames with/without
68 * noise info (e.g. averaging might be done in app); measured dBm values are
69 * always negative ... using a negative value as the default keeps all
70 * averages within an s8's (used in some apps) range of negative values. */
71 #define IWL_NOISE_MEAS_NOT_AVAILABLE (-127)
72
73 /*
74 * RTS threshold here is total size [2347] minus 4 FCS bytes
75 * Per spec:
76 * a value of 0 means RTS on all data/management packets
77 * a value > max MSDU size means no RTS
78 * else RTS for data/management frames where MPDU is larger
79 * than RTS value.
80 */
81 #define DEFAULT_RTS_THRESHOLD 2347U
82 #define MIN_RTS_THRESHOLD 0U
83 #define MAX_RTS_THRESHOLD 2347U
84 #define MAX_MSDU_SIZE 2304U
85 #define MAX_MPDU_SIZE 2346U
86 #define DEFAULT_BEACON_INTERVAL 200U
87 #define DEFAULT_SHORT_RETRY_LIMIT 7U
88 #define DEFAULT_LONG_RETRY_LIMIT 4U
89
90 #define IWL_NUM_SCAN_RATES (2)
91
92 /*
93 * One for each channel, holds all channel setup data
94 * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant
95 * with one another!
96 */
97 struct iwl_channel_info {
98 struct iwl_eeprom_channel eeprom; /* EEPROM regulatory limit */
99 struct iwl_eeprom_channel ht40_eeprom; /* EEPROM regulatory limit for
100 * HT40 channel */
101
102 u8 channel; /* channel number */
103 u8 flags; /* flags copied from EEPROM */
104 s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
105 s8 curr_txpow; /* (dBm) regulatory/spectrum/user (not h/w) limit */
106 s8 min_power; /* always 0 */
107 s8 scan_power; /* (dBm) regul. eeprom, direct scans, any rate */
108
109 u8 group_index; /* 0-4, maps channel to group1/2/3/4/5 */
110 u8 band_index; /* 0-4, maps channel to band1/2/3/4/5 */
111 enum ieee80211_band band;
112
113 /* HT40 channel info */
114 s8 ht40_max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
115 u8 ht40_flags; /* flags copied from EEPROM */
116 u8 ht40_extension_channel; /* HT_IE_EXT_CHANNEL_* */
117 };
118
119 /*
120 * Minimum number of queues. MAX_NUM is defined in hw specific files.
121 * Set the minimum to accommodate
122 * - 4 standard TX queues
123 * - the command queue
124 * - 4 PAN TX queues
125 * - the PAN multicast queue, and
126 * - the AUX (TX during scan dwell) queue.
127 */
128 #define IWL_MIN_NUM_QUEUES 11
129
130 /*
131 * Command queue depends on iPAN support.
132 */
133 #define IWL_DEFAULT_CMD_QUEUE_NUM 4
134 #define IWL_IPAN_CMD_QUEUE_NUM 9
135
136 #define IEEE80211_DATA_LEN 2304
137 #define IEEE80211_4ADDR_LEN 30
138 #define IEEE80211_HLEN (IEEE80211_4ADDR_LEN)
139 #define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
140
141 #define SUP_RATE_11A_MAX_NUM_CHANNELS 8
142 #define SUP_RATE_11B_MAX_NUM_CHANNELS 4
143 #define SUP_RATE_11G_MAX_NUM_CHANNELS 12
144
145 #define IWL_SUPPORTED_RATES_IE_LEN 8
146
147 #define IWL_INVALID_RATE 0xFF
148 #define IWL_INVALID_VALUE -1
149
150 union iwl_ht_rate_supp {
151 u16 rates;
152 struct {
153 u8 siso_rate;
154 u8 mimo_rate;
155 };
156 };
157
158 #define CFG_HT_RX_AMPDU_FACTOR_8K (0x0)
159 #define CFG_HT_RX_AMPDU_FACTOR_16K (0x1)
160 #define CFG_HT_RX_AMPDU_FACTOR_32K (0x2)
161 #define CFG_HT_RX_AMPDU_FACTOR_64K (0x3)
162 #define CFG_HT_RX_AMPDU_FACTOR_DEF CFG_HT_RX_AMPDU_FACTOR_64K
163 #define CFG_HT_RX_AMPDU_FACTOR_MAX CFG_HT_RX_AMPDU_FACTOR_64K
164 #define CFG_HT_RX_AMPDU_FACTOR_MIN CFG_HT_RX_AMPDU_FACTOR_8K
165
166 /*
167 * Maximal MPDU density for TX aggregation
168 * 4 - 2us density
169 * 5 - 4us density
170 * 6 - 8us density
171 * 7 - 16us density
172 */
173 #define CFG_HT_MPDU_DENSITY_2USEC (0x4)
174 #define CFG_HT_MPDU_DENSITY_4USEC (0x5)
175 #define CFG_HT_MPDU_DENSITY_8USEC (0x6)
176 #define CFG_HT_MPDU_DENSITY_16USEC (0x7)
177 #define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_4USEC
178 #define CFG_HT_MPDU_DENSITY_MAX CFG_HT_MPDU_DENSITY_16USEC
179 #define CFG_HT_MPDU_DENSITY_MIN (0x1)
180
181 struct iwl_ht_config {
182 bool single_chain_sufficient;
183 enum ieee80211_smps_mode smps; /* current smps mode */
184 };
185
186 /* QoS structures */
187 struct iwl_qos_info {
188 int qos_active;
189 struct iwl_qosparam_cmd def_qos_parm;
190 };
191
192 /*
193 * Structure should be accessed with sta_lock held. When station addition
194 * is in progress (IWL_STA_UCODE_INPROGRESS) it is possible to access only
195 * the commands (iwl_addsta_cmd and iwl_link_quality_cmd) without sta_lock
196 * held.
197 */
198 struct iwl_station_entry {
199 struct iwl_addsta_cmd sta;
200 u8 used, ctxid;
201 struct iwl_link_quality_cmd *lq;
202 };
203
204 /*
205 * iwl_station_priv: Driver's private station information
206 *
207 * When mac80211 creates a station it reserves some space (hw->sta_data_size)
208 * in the structure for use by driver. This structure is places in that
209 * space.
210 */
211 struct iwl_station_priv {
212 struct iwl_rxon_context *ctx;
213 struct iwl_lq_sta lq_sta;
214 atomic_t pending_frames;
215 bool client;
216 bool asleep;
217 u8 max_agg_bufsize;
218 u8 sta_id;
219 };
220
221 /**
222 * struct iwl_vif_priv - driver's private per-interface information
223 *
224 * When mac80211 allocates a virtual interface, it can allocate
225 * space for us to put data into.
226 */
227 struct iwl_vif_priv {
228 struct iwl_rxon_context *ctx;
229 u8 ibss_bssid_sta_id;
230 };
231
232 /* v1/v2 uCode file layout */
233 struct iwl_ucode_header {
234 __le32 ver; /* major/minor/API/serial */
235 union {
236 struct {
237 __le32 inst_size; /* bytes of runtime code */
238 __le32 data_size; /* bytes of runtime data */
239 __le32 init_size; /* bytes of init code */
240 __le32 init_data_size; /* bytes of init data */
241 __le32 boot_size; /* bytes of bootstrap code */
242 u8 data[0]; /* in same order as sizes */
243 } v1;
244 struct {
245 __le32 build; /* build number */
246 __le32 inst_size; /* bytes of runtime code */
247 __le32 data_size; /* bytes of runtime data */
248 __le32 init_size; /* bytes of init code */
249 __le32 init_data_size; /* bytes of init data */
250 __le32 boot_size; /* bytes of bootstrap code */
251 u8 data[0]; /* in same order as sizes */
252 } v2;
253 } u;
254 };
255
256 /*
257 * new TLV uCode file layout
258 *
259 * The new TLV file format contains TLVs, that each specify
260 * some piece of data. To facilitate "groups", for example
261 * different instruction image with different capabilities,
262 * bundled with the same init image, an alternative mechanism
263 * is provided:
264 * When the alternative field is 0, that means that the item
265 * is always valid. When it is non-zero, then it is only
266 * valid in conjunction with items of the same alternative,
267 * in which case the driver (user) selects one alternative
268 * to use.
269 */
270
271 enum iwl_ucode_tlv_type {
272 IWL_UCODE_TLV_INVALID = 0, /* unused */
273 IWL_UCODE_TLV_INST = 1,
274 IWL_UCODE_TLV_DATA = 2,
275 IWL_UCODE_TLV_INIT = 3,
276 IWL_UCODE_TLV_INIT_DATA = 4,
277 IWL_UCODE_TLV_BOOT = 5,
278 IWL_UCODE_TLV_PROBE_MAX_LEN = 6, /* a u32 value */
279 IWL_UCODE_TLV_PAN = 7,
280 IWL_UCODE_TLV_RUNT_EVTLOG_PTR = 8,
281 IWL_UCODE_TLV_RUNT_EVTLOG_SIZE = 9,
282 IWL_UCODE_TLV_RUNT_ERRLOG_PTR = 10,
283 IWL_UCODE_TLV_INIT_EVTLOG_PTR = 11,
284 IWL_UCODE_TLV_INIT_EVTLOG_SIZE = 12,
285 IWL_UCODE_TLV_INIT_ERRLOG_PTR = 13,
286 IWL_UCODE_TLV_ENHANCE_SENS_TBL = 14,
287 IWL_UCODE_TLV_PHY_CALIBRATION_SIZE = 15,
288 IWL_UCODE_TLV_WOWLAN_INST = 16,
289 IWL_UCODE_TLV_WOWLAN_DATA = 17,
290 IWL_UCODE_TLV_FLAGS = 18,
291 };
292
293 /**
294 * enum iwl_ucode_tlv_flag - ucode API flags
295 * @IWL_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously
296 * was a separate TLV but moved here to save space.
297 * @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behaviour on hidden SSID,
298 * treats good CRC threshold as a boolean
299 * @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w).
300 * @IWL_UCODE_TLV_FLAGS_P2P: This uCode image supports P2P.
301 */
302 enum iwl_ucode_tlv_flag {
303 IWL_UCODE_TLV_FLAGS_PAN = BIT(0),
304 IWL_UCODE_TLV_FLAGS_NEWSCAN = BIT(1),
305 IWL_UCODE_TLV_FLAGS_MFP = BIT(2),
306 IWL_UCODE_TLV_FLAGS_P2P = BIT(3),
307 };
308
309 struct iwl_ucode_tlv {
310 __le16 type; /* see above */
311 __le16 alternative; /* see comment */
312 __le32 length; /* not including type/length fields */
313 u8 data[0];
314 } __packed;
315
316 #define IWL_TLV_UCODE_MAGIC 0x0a4c5749
317
318 struct iwl_tlv_ucode_header {
319 /*
320 * The TLV style ucode header is distinguished from
321 * the v1/v2 style header by first four bytes being
322 * zero, as such is an invalid combination of
323 * major/minor/API/serial versions.
324 */
325 __le32 zero;
326 __le32 magic;
327 u8 human_readable[64];
328 __le32 ver; /* major/minor/API/serial */
329 __le32 build;
330 __le64 alternatives; /* bitmask of valid alternatives */
331 /*
332 * The data contained herein has a TLV layout,
333 * see above for the TLV header and types.
334 * Note that each TLV is padded to a length
335 * that is a multiple of 4 for alignment.
336 */
337 u8 data[0];
338 };
339
340 struct iwl_sensitivity_ranges {
341 u16 min_nrg_cck;
342 u16 max_nrg_cck;
343
344 u16 nrg_th_cck;
345 u16 nrg_th_ofdm;
346
347 u16 auto_corr_min_ofdm;
348 u16 auto_corr_min_ofdm_mrc;
349 u16 auto_corr_min_ofdm_x1;
350 u16 auto_corr_min_ofdm_mrc_x1;
351
352 u16 auto_corr_max_ofdm;
353 u16 auto_corr_max_ofdm_mrc;
354 u16 auto_corr_max_ofdm_x1;
355 u16 auto_corr_max_ofdm_mrc_x1;
356
357 u16 auto_corr_max_cck;
358 u16 auto_corr_max_cck_mrc;
359 u16 auto_corr_min_cck;
360 u16 auto_corr_min_cck_mrc;
361
362 u16 barker_corr_th_min;
363 u16 barker_corr_th_min_mrc;
364 u16 nrg_th_cca;
365 };
366
367
368 #define KELVIN_TO_CELSIUS(x) ((x)-273)
369 #define CELSIUS_TO_KELVIN(x) ((x)+273)
370
371
372 /******************************************************************************
373 *
374 * Functions implemented in core module which are forward declared here
375 * for use by iwl-[4-5].c
376 *
377 * NOTE: The implementation of these functions are not hardware specific
378 * which is why they are in the core module files.
379 *
380 * Naming convention --
381 * iwl_ <-- Is part of iwlwifi
382 * iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX)
383 *
384 ****************************************************************************/
385 extern void iwl_update_chain_flags(struct iwl_priv *priv);
386 extern const u8 iwl_bcast_addr[ETH_ALEN];
387
388 #define IWL_OPERATION_MODE_AUTO 0
389 #define IWL_OPERATION_MODE_HT_ONLY 1
390 #define IWL_OPERATION_MODE_MIXED 2
391 #define IWL_OPERATION_MODE_20MHZ 3
392
393 #define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000
394
395 /* Sensitivity and chain noise calibration */
396 #define INITIALIZATION_VALUE 0xFFFF
397 #define IWL_CAL_NUM_BEACONS 16
398 #define MAXIMUM_ALLOWED_PATHLOSS 15
399
400 #define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3
401
402 #define MAX_FA_OFDM 50
403 #define MIN_FA_OFDM 5
404 #define MAX_FA_CCK 50
405 #define MIN_FA_CCK 5
406
407 #define AUTO_CORR_STEP_OFDM 1
408
409 #define AUTO_CORR_STEP_CCK 3
410 #define AUTO_CORR_MAX_TH_CCK 160
411
412 #define NRG_DIFF 2
413 #define NRG_STEP_CCK 2
414 #define NRG_MARGIN 8
415 #define MAX_NUMBER_CCK_NO_FA 100
416
417 #define AUTO_CORR_CCK_MIN_VAL_DEF (125)
418
419 #define CHAIN_A 0
420 #define CHAIN_B 1
421 #define CHAIN_C 2
422 #define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4
423 #define ALL_BAND_FILTER 0xFF00
424 #define IN_BAND_FILTER 0xFF
425 #define MIN_AVERAGE_NOISE_MAX_VALUE 0xFFFFFFFF
426
427 #define NRG_NUM_PREV_STAT_L 20
428 #define NUM_RX_CHAINS 3
429
430 enum iwlagn_false_alarm_state {
431 IWL_FA_TOO_MANY = 0,
432 IWL_FA_TOO_FEW = 1,
433 IWL_FA_GOOD_RANGE = 2,
434 };
435
436 enum iwlagn_chain_noise_state {
437 IWL_CHAIN_NOISE_ALIVE = 0, /* must be 0 */
438 IWL_CHAIN_NOISE_ACCUMULATE,
439 IWL_CHAIN_NOISE_CALIBRATED,
440 IWL_CHAIN_NOISE_DONE,
441 };
442
443
444 /* Opaque calibration results */
445 struct iwl_calib_result {
446 struct list_head list;
447 size_t cmd_len;
448 struct iwl_calib_hdr hdr;
449 /* data follows */
450 };
451
452 /* Sensitivity calib data */
453 struct iwl_sensitivity_data {
454 u32 auto_corr_ofdm;
455 u32 auto_corr_ofdm_mrc;
456 u32 auto_corr_ofdm_x1;
457 u32 auto_corr_ofdm_mrc_x1;
458 u32 auto_corr_cck;
459 u32 auto_corr_cck_mrc;
460
461 u32 last_bad_plcp_cnt_ofdm;
462 u32 last_fa_cnt_ofdm;
463 u32 last_bad_plcp_cnt_cck;
464 u32 last_fa_cnt_cck;
465
466 u32 nrg_curr_state;
467 u32 nrg_prev_state;
468 u32 nrg_value[10];
469 u8 nrg_silence_rssi[NRG_NUM_PREV_STAT_L];
470 u32 nrg_silence_ref;
471 u32 nrg_energy_idx;
472 u32 nrg_silence_idx;
473 u32 nrg_th_cck;
474 s32 nrg_auto_corr_silence_diff;
475 u32 num_in_cck_no_fa;
476 u32 nrg_th_ofdm;
477
478 u16 barker_corr_th_min;
479 u16 barker_corr_th_min_mrc;
480 u16 nrg_th_cca;
481 };
482
483 /* Chain noise (differential Rx gain) calib data */
484 struct iwl_chain_noise_data {
485 u32 active_chains;
486 u32 chain_noise_a;
487 u32 chain_noise_b;
488 u32 chain_noise_c;
489 u32 chain_signal_a;
490 u32 chain_signal_b;
491 u32 chain_signal_c;
492 u16 beacon_count;
493 u8 disconn_array[NUM_RX_CHAINS];
494 u8 delta_gain_code[NUM_RX_CHAINS];
495 u8 radio_write;
496 u8 state;
497 };
498
499 #define EEPROM_SEM_TIMEOUT 10 /* milliseconds */
500 #define EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */
501
502 enum {
503 MEASUREMENT_READY = (1 << 0),
504 MEASUREMENT_ACTIVE = (1 << 1),
505 };
506
507 enum iwl_nvm_type {
508 NVM_DEVICE_TYPE_EEPROM = 0,
509 NVM_DEVICE_TYPE_OTP,
510 };
511
512 /*
513 * Two types of OTP memory access modes
514 * IWL_OTP_ACCESS_ABSOLUTE - absolute address mode,
515 * based on physical memory addressing
516 * IWL_OTP_ACCESS_RELATIVE - relative address mode,
517 * based on logical memory addressing
518 */
519 enum iwl_access_mode {
520 IWL_OTP_ACCESS_ABSOLUTE,
521 IWL_OTP_ACCESS_RELATIVE,
522 };
523
524 /**
525 * enum iwl_pa_type - Power Amplifier type
526 * @IWL_PA_SYSTEM: based on uCode configuration
527 * @IWL_PA_INTERNAL: use Internal only
528 */
529 enum iwl_pa_type {
530 IWL_PA_SYSTEM = 0,
531 IWL_PA_INTERNAL = 1,
532 };
533
534 /* reply_tx_statistics (for _agn devices) */
535 struct reply_tx_error_statistics {
536 u32 pp_delay;
537 u32 pp_few_bytes;
538 u32 pp_bt_prio;
539 u32 pp_quiet_period;
540 u32 pp_calc_ttak;
541 u32 int_crossed_retry;
542 u32 short_limit;
543 u32 long_limit;
544 u32 fifo_underrun;
545 u32 drain_flow;
546 u32 rfkill_flush;
547 u32 life_expire;
548 u32 dest_ps;
549 u32 host_abort;
550 u32 bt_retry;
551 u32 sta_invalid;
552 u32 frag_drop;
553 u32 tid_disable;
554 u32 fifo_flush;
555 u32 insuff_cf_poll;
556 u32 fail_hw_drop;
557 u32 sta_color_mismatch;
558 u32 unknown;
559 };
560
561 /* reply_agg_tx_statistics (for _agn devices) */
562 struct reply_agg_tx_error_statistics {
563 u32 underrun;
564 u32 bt_prio;
565 u32 few_bytes;
566 u32 abort;
567 u32 last_sent_ttl;
568 u32 last_sent_try;
569 u32 last_sent_bt_kill;
570 u32 scd_query;
571 u32 bad_crc32;
572 u32 response;
573 u32 dump_tx;
574 u32 delay_tx;
575 u32 unknown;
576 };
577
578 /* management statistics */
579 enum iwl_mgmt_stats {
580 MANAGEMENT_ASSOC_REQ = 0,
581 MANAGEMENT_ASSOC_RESP,
582 MANAGEMENT_REASSOC_REQ,
583 MANAGEMENT_REASSOC_RESP,
584 MANAGEMENT_PROBE_REQ,
585 MANAGEMENT_PROBE_RESP,
586 MANAGEMENT_BEACON,
587 MANAGEMENT_ATIM,
588 MANAGEMENT_DISASSOC,
589 MANAGEMENT_AUTH,
590 MANAGEMENT_DEAUTH,
591 MANAGEMENT_ACTION,
592 MANAGEMENT_MAX,
593 };
594 /* control statistics */
595 enum iwl_ctrl_stats {
596 CONTROL_BACK_REQ = 0,
597 CONTROL_BACK,
598 CONTROL_PSPOLL,
599 CONTROL_RTS,
600 CONTROL_CTS,
601 CONTROL_ACK,
602 CONTROL_CFEND,
603 CONTROL_CFENDACK,
604 CONTROL_MAX,
605 };
606
607 struct traffic_stats {
608 #ifdef CONFIG_IWLWIFI_DEBUGFS
609 u32 mgmt[MANAGEMENT_MAX];
610 u32 ctrl[CONTROL_MAX];
611 u32 data_cnt;
612 u64 data_bytes;
613 #endif
614 };
615
616 /*
617 * schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds
618 * to perform continuous uCode event logging operation if enabled
619 */
620 #define UCODE_TRACE_PERIOD (100)
621
622 /*
623 * iwl_event_log: current uCode event log position
624 *
625 * @ucode_trace: enable/disable ucode continuous trace timer
626 * @num_wraps: how many times the event buffer wraps
627 * @next_entry: the entry just before the next one that uCode would fill
628 * @non_wraps_count: counter for no wrap detected when dump ucode events
629 * @wraps_once_count: counter for wrap once detected when dump ucode events
630 * @wraps_more_count: counter for wrap more than once detected
631 * when dump ucode events
632 */
633 struct iwl_event_log {
634 bool ucode_trace;
635 u32 num_wraps;
636 u32 next_entry;
637 int non_wraps_count;
638 int wraps_once_count;
639 int wraps_more_count;
640 };
641
642 /*
643 * This is the threshold value of plcp error rate per 100mSecs. It is
644 * used to set and check for the validity of plcp_delta.
645 */
646 #define IWL_MAX_PLCP_ERR_THRESHOLD_MIN (1)
647 #define IWL_MAX_PLCP_ERR_THRESHOLD_DEF (50)
648 #define IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF (100)
649 #define IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF (200)
650 #define IWL_MAX_PLCP_ERR_THRESHOLD_MAX (255)
651 #define IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE (0)
652
653 #define IWL_DELAY_NEXT_FORCE_RF_RESET (HZ*3)
654 #define IWL_DELAY_NEXT_FORCE_FW_RELOAD (HZ*5)
655
656 /* TX queue watchdog timeouts in mSecs */
657 #define IWL_DEF_WD_TIMEOUT (2000)
658 #define IWL_LONG_WD_TIMEOUT (10000)
659 #define IWL_MAX_WD_TIMEOUT (120000)
660
661 /* BT Antenna Coupling Threshold (dB) */
662 #define IWL_BT_ANTENNA_COUPLING_THRESHOLD (35)
663
664 /* Firmware reload counter and Timestamp */
665 #define IWL_MIN_RELOAD_DURATION 1000 /* 1000 ms */
666 #define IWL_MAX_CONTINUE_RELOAD_CNT 4
667
668
669 enum iwl_reset {
670 IWL_RF_RESET = 0,
671 IWL_FW_RESET,
672 IWL_MAX_FORCE_RESET,
673 };
674
675 struct iwl_force_reset {
676 int reset_request_count;
677 int reset_success_count;
678 int reset_reject_count;
679 unsigned long reset_duration;
680 unsigned long last_force_reset_jiffies;
681 };
682
683 /* extend beacon time format bit shifting */
684 /*
685 * for _agn devices
686 * bits 31:22 - extended
687 * bits 21:0 - interval
688 */
689 #define IWLAGN_EXT_BEACON_TIME_POS 22
690
691 struct iwl_rxon_context {
692 struct ieee80211_vif *vif;
693
694 /*
695 * We could use the vif to indicate active, but we
696 * also need it to be active during disabling when
697 * we already removed the vif for type setting.
698 */
699 bool always_active, is_active;
700
701 bool ht_need_multiple_chains;
702
703 enum iwl_rxon_context_id ctxid;
704
705 u32 interface_modes, exclusive_interface_modes;
706 u8 unused_devtype, ap_devtype, ibss_devtype, station_devtype;
707
708 /*
709 * We declare this const so it can only be
710 * changed via explicit cast within the
711 * routines that actually update the physical
712 * hardware.
713 */
714 const struct iwl_rxon_cmd active;
715 struct iwl_rxon_cmd staging;
716
717 struct iwl_rxon_time_cmd timing;
718
719 struct iwl_qos_info qos_data;
720
721 u8 bcast_sta_id, ap_sta_id;
722
723 u8 rxon_cmd, rxon_assoc_cmd, rxon_timing_cmd;
724 u8 qos_cmd;
725 u8 wep_key_cmd;
726
727 struct iwl_wep_key wep_keys[WEP_KEYS_MAX];
728 u8 key_mapping_keys;
729
730 __le32 station_flags;
731
732 int beacon_int;
733
734 struct {
735 bool non_gf_sta_present;
736 u8 protection;
737 bool enabled, is_40mhz;
738 u8 extension_chan_offset;
739 } ht;
740
741 u8 bssid[ETH_ALEN];
742 bool preauth_bssid;
743
744 bool last_tx_rejected;
745 };
746
747 enum iwl_scan_type {
748 IWL_SCAN_NORMAL,
749 IWL_SCAN_RADIO_RESET,
750 IWL_SCAN_ROC,
751 };
752
753 #ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE
754 struct iwl_testmode_trace {
755 u32 buff_size;
756 u32 total_size;
757 u32 num_chunks;
758 u8 *cpu_addr;
759 u8 *trace_addr;
760 dma_addr_t dma_addr;
761 bool trace_enabled;
762 };
763 struct iwl_testmode_sram {
764 u32 buff_size;
765 u32 num_chunks;
766 u8 *buff_addr;
767 bool sram_readed;
768 };
769 #endif
770
771 struct iwl_wipan_noa_data {
772 struct rcu_head rcu_head;
773 u32 length;
774 u8 data[];
775 };
776
777 struct iwl_priv {
778
779 /*data shared among all the driver's layers */
780 struct iwl_shared _shrd;
781 struct iwl_shared *shrd;
782
783 /* ieee device used by generic ieee processing code */
784 struct ieee80211_hw *hw;
785 struct ieee80211_channel *ieee_channels;
786 struct ieee80211_rate *ieee_rates;
787 struct kmem_cache *tx_cmd_pool;
788 struct iwl_cfg *cfg;
789
790 enum ieee80211_band band;
791
792 void (*pre_rx_handler)(struct iwl_priv *priv,
793 struct iwl_rx_mem_buffer *rxb);
794 int (*rx_handlers[REPLY_MAX])(struct iwl_priv *priv,
795 struct iwl_rx_mem_buffer *rxb,
796 struct iwl_device_cmd *cmd);
797
798 struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
799
800 /* spectrum measurement report caching */
801 struct iwl_spectrum_notification measure_report;
802 u8 measurement_status;
803
804 /* ucode beacon time */
805 u32 ucode_beacon_time;
806 int missed_beacon_threshold;
807
808 /* track IBSS manager (last beacon) status */
809 u32 ibss_manager;
810
811 /* jiffies when last recovery from statistics was performed */
812 unsigned long rx_statistics_jiffies;
813
814 /*counters */
815 u32 rx_handlers_stats[REPLY_MAX];
816
817 /* force reset */
818 struct iwl_force_reset force_reset[IWL_MAX_FORCE_RESET];
819
820 /* firmware reload counter and timestamp */
821 unsigned long reload_jiffies;
822 int reload_count;
823
824 /* we allocate array of iwl_channel_info for NIC's valid channels.
825 * Access via channel # using indirect index array */
826 struct iwl_channel_info *channel_info; /* channel info array */
827 u8 channel_count; /* # of channels */
828
829 /* thermal calibration */
830 s32 temperature; /* Celsius */
831 s32 last_temperature;
832
833 /* init calibration results */
834 struct list_head calib_results;
835
836 struct iwl_wipan_noa_data __rcu *noa_data;
837
838 /* Scan related variables */
839 unsigned long scan_start;
840 unsigned long scan_start_tsf;
841 void *scan_cmd;
842 enum ieee80211_band scan_band;
843 struct cfg80211_scan_request *scan_request;
844 struct ieee80211_vif *scan_vif;
845 enum iwl_scan_type scan_type;
846 u8 scan_tx_ant[IEEE80211_NUM_BANDS];
847 u8 mgmt_tx_ant;
848
849 /* max number of station keys */
850 u8 sta_key_max_num;
851
852 bool new_scan_threshold_behaviour;
853
854 /* EEPROM MAC addresses */
855 struct mac_address addresses[2];
856
857 /* uCode images, save to reload in case of failure */
858 int fw_index; /* firmware we're trying to load */
859 u32 ucode_ver; /* version of ucode, copy of
860 iwl_ucode.ver */
861
862 char firmware_name[25];
863
864 struct iwl_rxon_context contexts[NUM_IWL_RXON_CTX];
865
866 __le16 switch_channel;
867
868 struct {
869 u32 error_event_table;
870 u32 log_event_table;
871 } device_pointers;
872
873 u16 active_rate;
874
875 u8 start_calib;
876 struct iwl_sensitivity_data sensitivity_data;
877 struct iwl_chain_noise_data chain_noise_data;
878 bool enhance_sensitivity_table;
879 __le16 sensitivity_tbl[HD_TABLE_SIZE];
880 __le16 enhance_sensitivity_tbl[ENHANCE_HD_TABLE_ENTRIES];
881
882 struct iwl_ht_config current_ht_config;
883
884 /* Rate scaling data */
885 u8 retry_rate;
886
887 int activity_timer_active;
888
889 /* counts mgmt, ctl, and data packets */
890 struct traffic_stats tx_stats;
891 struct traffic_stats rx_stats;
892
893 struct iwl_power_mgr power_data;
894 struct iwl_tt_mgmt thermal_throttle;
895
896 /* station table variables */
897 int num_stations;
898 struct iwl_station_entry stations[IWLAGN_STATION_COUNT];
899 unsigned long ucode_key_table;
900
901 u8 mac80211_registered;
902
903 /* Indication if ieee80211_ops->open has been called */
904 u8 is_open;
905
906 enum nl80211_iftype iw_mode;
907
908 /* Last Rx'd beacon timestamp */
909 u64 timestamp;
910
911 struct {
912 __le32 flag;
913 struct statistics_general_common common;
914 struct statistics_rx_non_phy rx_non_phy;
915 struct statistics_rx_phy rx_ofdm;
916 struct statistics_rx_ht_phy rx_ofdm_ht;
917 struct statistics_rx_phy rx_cck;
918 struct statistics_tx tx;
919 #ifdef CONFIG_IWLWIFI_DEBUGFS
920 struct statistics_bt_activity bt_activity;
921 __le32 num_bt_kills, accum_num_bt_kills;
922 #endif
923 } statistics;
924 #ifdef CONFIG_IWLWIFI_DEBUGFS
925 struct {
926 struct statistics_general_common common;
927 struct statistics_rx_non_phy rx_non_phy;
928 struct statistics_rx_phy rx_ofdm;
929 struct statistics_rx_ht_phy rx_ofdm_ht;
930 struct statistics_rx_phy rx_cck;
931 struct statistics_tx tx;
932 struct statistics_bt_activity bt_activity;
933 } accum_stats, delta_stats, max_delta_stats;
934 #endif
935
936 /*
937 * reporting the number of tids has AGG on. 0 means
938 * no AGGREGATION
939 */
940 u8 agg_tids_count;
941
942 struct iwl_rx_phy_res last_phy_res;
943 bool last_phy_res_valid;
944
945 struct completion firmware_loading_complete;
946
947 u32 init_evtlog_ptr, init_evtlog_size, init_errlog_ptr;
948 u32 inst_evtlog_ptr, inst_evtlog_size, inst_errlog_ptr;
949
950 /*
951 * chain noise reset and gain commands are the
952 * two extra calibration commands follows the standard
953 * phy calibration commands
954 */
955 u8 phy_calib_chain_noise_reset_cmd;
956 u8 phy_calib_chain_noise_gain_cmd;
957
958 /* counts reply_tx error */
959 struct reply_tx_error_statistics reply_tx_stats;
960 struct reply_agg_tx_error_statistics reply_agg_tx_stats;
961
962 /* remain-on-channel offload support */
963 struct ieee80211_channel *hw_roc_channel;
964 struct delayed_work hw_roc_disable_work;
965 enum nl80211_channel_type hw_roc_chantype;
966 int hw_roc_duration;
967 bool hw_roc_setup, hw_roc_start_notified;
968
969 /* bt coex */
970 u8 bt_enable_flag;
971 u8 bt_status;
972 u8 bt_traffic_load, last_bt_traffic_load;
973 bool bt_ch_announce;
974 bool bt_full_concurrent;
975 bool bt_ant_couple_ok;
976 __le32 kill_ack_mask;
977 __le32 kill_cts_mask;
978 __le16 bt_valid;
979 u16 bt_on_thresh;
980 u16 bt_duration;
981 u16 dynamic_frag_thresh;
982 u8 bt_ci_compliance;
983 struct work_struct bt_traffic_change_work;
984 bool bt_enable_pspoll;
985 struct iwl_rxon_context *cur_rssi_ctx;
986 bool bt_is_sco;
987
988 struct work_struct restart;
989 struct work_struct scan_completed;
990 struct work_struct abort_scan;
991
992 struct work_struct beacon_update;
993 struct iwl_rxon_context *beacon_ctx;
994 struct sk_buff *beacon_skb;
995 void *beacon_cmd;
996
997 struct work_struct tt_work;
998 struct work_struct ct_enter;
999 struct work_struct ct_exit;
1000 struct work_struct start_internal_scan;
1001 struct work_struct tx_flush;
1002 struct work_struct bt_full_concurrency;
1003 struct work_struct bt_runtime_config;
1004
1005 struct delayed_work scan_check;
1006
1007 /* TX Power */
1008 s8 tx_power_user_lmt;
1009 s8 tx_power_device_lmt;
1010 s8 tx_power_lmt_in_half_dbm; /* max tx power in half-dBm format */
1011 s8 tx_power_next;
1012
1013 #ifdef CONFIG_IWLWIFI_DEBUGFS
1014 /* debugfs */
1015 u16 tx_traffic_idx;
1016 u16 rx_traffic_idx;
1017 u8 *tx_traffic;
1018 u8 *rx_traffic;
1019 struct dentry *debugfs_dir;
1020 u32 dbgfs_sram_offset, dbgfs_sram_len;
1021 bool disable_ht40;
1022 void *wowlan_sram;
1023 #endif /* CONFIG_IWLWIFI_DEBUGFS */
1024
1025 struct work_struct txpower_work;
1026 u32 disable_sens_cal;
1027 u32 disable_chain_noise_cal;
1028 struct work_struct run_time_calib_work;
1029 struct timer_list statistics_periodic;
1030 struct timer_list ucode_trace;
1031 struct timer_list watchdog;
1032
1033 struct iwl_event_log event_log;
1034
1035 struct led_classdev led;
1036 unsigned long blink_on, blink_off;
1037 bool led_registered;
1038 #ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE
1039 struct iwl_testmode_trace testmode_trace;
1040 struct iwl_testmode_sram testmode_sram;
1041 u32 tm_fixed_rate;
1042 #endif
1043
1044 /* WoWLAN GTK rekey data */
1045 u8 kck[NL80211_KCK_LEN], kek[NL80211_KEK_LEN];
1046 __le64 replay_ctr;
1047 __le16 last_seq_ctl;
1048 bool have_rekey_data;
1049 }; /*iwl_priv */
1050
1051 extern struct iwl_mod_params iwlagn_mod_params;
1052
1053 static inline struct iwl_rxon_context *
1054 iwl_rxon_ctx_from_vif(struct ieee80211_vif *vif)
1055 {
1056 struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
1057
1058 return vif_priv->ctx;
1059 }
1060
1061 #define for_each_context(priv, ctx) \
1062 for (ctx = &priv->contexts[IWL_RXON_CTX_BSS]; \
1063 ctx < &priv->contexts[NUM_IWL_RXON_CTX]; ctx++) \
1064 if (priv->shrd->valid_contexts & BIT(ctx->ctxid))
1065
1066 static inline int iwl_is_associated_ctx(struct iwl_rxon_context *ctx)
1067 {
1068 return (ctx->active.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0;
1069 }
1070
1071 static inline int iwl_is_associated(struct iwl_priv *priv,
1072 enum iwl_rxon_context_id ctxid)
1073 {
1074 return iwl_is_associated_ctx(&priv->contexts[ctxid]);
1075 }
1076
1077 static inline int iwl_is_any_associated(struct iwl_priv *priv)
1078 {
1079 struct iwl_rxon_context *ctx;
1080 for_each_context(priv, ctx)
1081 if (iwl_is_associated_ctx(ctx))
1082 return true;
1083 return false;
1084 }
1085
1086 static inline int is_channel_valid(const struct iwl_channel_info *ch_info)
1087 {
1088 if (ch_info == NULL)
1089 return 0;
1090 return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0;
1091 }
1092
1093 static inline int is_channel_radar(const struct iwl_channel_info *ch_info)
1094 {
1095 return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0;
1096 }
1097
1098 static inline u8 is_channel_a_band(const struct iwl_channel_info *ch_info)
1099 {
1100 return ch_info->band == IEEE80211_BAND_5GHZ;
1101 }
1102
1103 static inline u8 is_channel_bg_band(const struct iwl_channel_info *ch_info)
1104 {
1105 return ch_info->band == IEEE80211_BAND_2GHZ;
1106 }
1107
1108 static inline int is_channel_passive(const struct iwl_channel_info *ch)
1109 {
1110 return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0;
1111 }
1112
1113 static inline int is_channel_ibss(const struct iwl_channel_info *ch)
1114 {
1115 return ((ch->flags & EEPROM_CHANNEL_IBSS)) ? 1 : 0;
1116 }
1117
1118 #endif /* __iwl_dev_h__ */
This page took 0.0784899999999999 seconds and 5 git commands to generate.