drivers/net/wireless/iwlwifi/iwl-shared.h

   1 /******************************************************************************
   2  *
   3  * This file is provided under a dual BSD/GPLv2 license.  When using or
   4  * redistributing this file, you may do so under either license.
   5  *
   6  * GPL LICENSE SUMMARY
   7  *
   8  * Copyright(c) 2007 - 2011 Intel Corporation. All rights reserved.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of version 2 of the GNU General Public License as
  12  * published by the Free Software Foundation.
  13  *
  14  * This program is distributed in the hope that it will be useful, but
  15  * WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  17  * General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
  22  * USA
  23  *
  24  * The full GNU General Public License is included in this distribution
  25  * in the file called LICENSE.GPL.
  26  *
  27  * Contact Information:
  28  *  Intel Linux Wireless <ilw@linux.intel.com>
  29  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  30  *
  31  * BSD LICENSE
  32  *
  33  * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
  34  * All rights reserved.
  35  *
  36  * Redistribution and use in source and binary forms, with or without
  37  * modification, are permitted provided that the following conditions
  38  * are met:
  39  *
  40  *  * Redistributions of source code must retain the above copyright
  41  *    notice, this list of conditions and the following disclaimer.
  42  *  * Redistributions in binary form must reproduce the above copyright
  43  *    notice, this list of conditions and the following disclaimer in
  44  *    the documentation and/or other materials provided with the
  45  *    distribution.
  46  *  * Neither the name Intel Corporation nor the names of its
  47  *    contributors may be used to endorse or promote products derived
  48  *    from this software without specific prior written permission.
  49  *
  50  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  51  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  52  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  53  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  54  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  55  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  56  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  57  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  58  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  59  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  60  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  61  *
  62  *****************************************************************************/
  63 #ifndef __iwl_shared_h__
  64 #define __iwl_shared_h__
  65
  66 #include <linux/types.h>
  67 #include <linux/spinlock.h>
  68 #include <linux/mutex.h>
  69 #include <linux/gfp.h>
  70 #include <linux/mm.h> /* for page_address */
  71 #include <net/mac80211.h>
  72
  73 #include "iwl-commands.h"
  74
  75 /**
  76  * DOC: shared area - role and goal
  77  *
  78  * The shared area contains all the data exported by the upper layer to the
  79  * other layers. Since the bus and transport layer shouldn't dereference
  80  * iwl_priv, all the data needed by the upper layer and the transport / bus
  81  * layer must be here.
  82  * The shared area also holds pointer to all the other layers. This allows a
  83  * layer to call a function from another layer.
  84  *
  85  * NOTE: All the layers hold a pointer to the shared area which must be shrd.
  86  *      A few macros assume that (_m)->shrd points to the shared area no matter
  87  *      what _m is.
  88  *
  89  * gets notifications about enumeration, suspend, resume.
  90  * For the moment, the bus layer is not a linux kernel module as itself, and
  91  * the module_init function of the driver must call the bus specific
  92  * registration functions. These functions are listed at the end of this file.
  93  * For the moment, there is only one implementation of this interface: PCI-e.
  94  * This implementation is iwl-pci.c
  95  */
  96
  97 struct iwl_bus;
  98 struct iwl_priv;
  99 struct iwl_trans;
 100 struct iwl_sensitivity_ranges;
 101 struct iwl_trans_ops;
 102
 103 #define DRV_NAME        "iwlwifi"
 104 #define IWLWIFI_VERSION "in-tree:"
 105 #define DRV_COPYRIGHT   "Copyright(c) 2003-2011 Intel Corporation"
 106 #define DRV_AUTHOR     "<ilw@linux.intel.com>"
 107
 108 extern struct iwl_mod_params iwlagn_mod_params;
 109
 110 #define IWL_DISABLE_HT_ALL      BIT(0)
 111 #define IWL_DISABLE_HT_TXAGG    BIT(1)
 112 #define IWL_DISABLE_HT_RXAGG    BIT(2)
 113
 114 /**
 115  * struct iwl_mod_params
 116  *
 117  * Holds the module parameters
 118  *
 119  * @sw_crypto: using hardware encryption, default = 0
 120  * @num_of_queues: number of tx queue, HW dependent
 121  * @disable_11n: disable 11n capabilities, default = 0,
 122  *      use IWL_DISABLE_HT_* constants
 123  * @amsdu_size_8K: enable 8K amsdu size, default = 1
 124  * @antenna: both antennas (use diversity), default = 0
 125  * @restart_fw: restart firmware, default = 1
 126  * @plcp_check: enable plcp health check, default = true
 127  * @ack_check: disable ack health check, default = false
 128  * @wd_disable: enable stuck queue check, default = 0
 129  * @bt_coex_active: enable bt coex, default = true
 130  * @led_mode: system default, default = 0
 131  * @no_sleep_autoadjust: disable autoadjust, default = true
 132  * @power_save: disable power save, default = false
 133  * @power_level: power level, default = 1
 134  * @debug_level: levels are IWL_DL_*
 135  * @ant_coupling: antenna coupling in dB, default = 0
 136  * @bt_ch_announce: BT channel inhibition, default = enable
 137  * @wanted_ucode_alternative: ucode alternative to use, default = 1
 138  * @auto_agg: enable agg. without check, default = true
 139  */
 140 struct iwl_mod_params {
 141         int sw_crypto;
 142         int num_of_queues;
 143         unsigned int disable_11n;
 144         int amsdu_size_8K;
 145         int antenna;
 146         int restart_fw;
 147         bool plcp_check;
 148         bool ack_check;
 149         int  wd_disable;
 150         bool bt_coex_active;
 151         int led_mode;
 152         bool no_sleep_autoadjust;
 153         bool power_save;
 154         int power_level;
 155         u32 debug_level;
 156         int ant_coupling;
 157         bool bt_ch_announce;
 158         int wanted_ucode_alternative;
 159         bool auto_agg;
 160 };
 161
 162 /**
 163  * struct iwl_hw_params
 164  *
 165  * Holds the module parameters
 166  *
 167  * @max_txq_num: Max # Tx queues supported
 168  * @num_ampdu_queues: num of ampdu queues
 169  * @tx_chains_num: Number of TX chains
 170  * @rx_chains_num: Number of RX chains
 171  * @valid_tx_ant: usable antennas for TX
 172  * @valid_rx_ant: usable antennas for RX
 173  * @ht40_channel: is 40MHz width possible: BIT(IEEE80211_BAND_XXX)
 174  * @sku: sku read from EEPROM
 175  * @rx_page_order: Rx buffer page order
 176  * @max_inst_size: for ucode use
 177  * @max_data_size: for ucode use
 178  * @ct_kill_threshold: temperature threshold - in hw dependent unit
 179  * @ct_kill_exit_threshold: when to reeable the device - in hw dependent unit
 180  *      relevant for 1000, 6000 and up
 181  * @wd_timeout: TX queues watchdog timeout
 182  * @struct iwl_sensitivity_ranges: range of sensitivity values
 183  */
 184 struct iwl_hw_params {
 185         u8  max_txq_num;
 186         u8  num_ampdu_queues;
 187         u8  tx_chains_num;
 188         u8  rx_chains_num;
 189         u8  valid_tx_ant;
 190         u8  valid_rx_ant;
 191         u8  ht40_channel;
 192         bool shadow_reg_enable;
 193         u16 sku;
 194         u32 rx_page_order;
 195         u32 max_inst_size;
 196         u32 max_data_size;
 197         u32 ct_kill_threshold;
 198         u32 ct_kill_exit_threshold;
 199         unsigned int wd_timeout;
 200
 201         const struct iwl_sensitivity_ranges *sens;
 202 };
 203
 204 /**
 205  * enum iwl_ucode_type
 206  *
 207  * The type of ucode currently loaded on the hardware.
 208  *
 209  * @IWL_UCODE_NONE: No ucode loaded
 210  * @IWL_UCODE_REGULAR: Normal runtime ucode
 211  * @IWL_UCODE_INIT: Initial ucode
 212  * @IWL_UCODE_WOWLAN: Wake on Wireless enabled ucode
 213  */
 214 enum iwl_ucode_type {
 215         IWL_UCODE_NONE,
 216         IWL_UCODE_REGULAR,
 217         IWL_UCODE_INIT,
 218         IWL_UCODE_WOWLAN,
 219 };
 220
 221 /**
 222  * struct iwl_notification_wait - notification wait entry
 223  * @list: list head for global list
 224  * @fn: function called with the notification
 225  * @cmd: command ID
 226  *
 227  * This structure is not used directly, to wait for a
 228  * notification declare it on the stack, and call
 229  * iwlagn_init_notification_wait() with appropriate
 230  * parameters. Then do whatever will cause the ucode
 231  * to notify the driver, and to wait for that then
 232  * call iwlagn_wait_notification().
 233  *
 234  * Each notification is one-shot. If at some point we
 235  * need to support multi-shot notifications (which
 236  * can't be allocated on the stack) we need to modify
 237  * the code for them.
 238  */
 239 struct iwl_notification_wait {
 240         struct list_head list;
 241
 242         void (*fn)(struct iwl_trans *trans, struct iwl_rx_packet *pkt,
 243                    void *data);
 244         void *fn_data;
 245
 246         u8 cmd;
 247         bool triggered, aborted;
 248 };
 249
 250 /**
 251  * enum iwl_pa_type - Power Amplifier type
 252  * @IWL_PA_SYSTEM:  based on uCode configuration
 253  * @IWL_PA_INTERNAL: use Internal only
 254  */
 255 enum iwl_pa_type {
 256         IWL_PA_SYSTEM = 0,
 257         IWL_PA_INTERNAL = 1,
 258 };
 259
 260 /*
 261  * LED mode
 262  *    IWL_LED_DEFAULT:  use device default
 263  *    IWL_LED_RF_STATE: turn LED on/off based on RF state
 264  *                      LED ON  = RF ON
 265  *                      LED OFF = RF OFF
 266  *    IWL_LED_BLINK:    adjust led blink rate based on blink table
 267  */
 268 enum iwl_led_mode {
 269         IWL_LED_DEFAULT,
 270         IWL_LED_RF_STATE,
 271         IWL_LED_BLINK,
 272 };
 273
 274 /**
 275  * struct iwl_cfg
 276  * @name: Offical name of the device
 277  * @fw_name_pre: Firmware filename prefix. The api version and extension
 278  *      (.ucode) will be added to filename before loading from disk. The
 279  *      filename is constructed as fw_name_pre<api>.ucode.
 280  * @ucode_api_max: Highest version of uCode API supported by driver.
 281  * @ucode_api_ok: oldest version of the uCode API that is OK to load
 282  *      without a warning, for use in transitions
 283  * @ucode_api_min: Lowest version of uCode API supported by driver.
 284  * @valid_tx_ant: valid transmit antenna
 285  * @valid_rx_ant: valid receive antenna
 286  * @sku: sku information from EEPROM
 287  * @eeprom_ver: EEPROM version
 288  * @eeprom_calib_ver: EEPROM calibration version
 289  * @lib: pointer to the lib ops
 290  * @additional_nic_config: additional nic configuration
 291  * @base_params: pointer to basic parameters
 292  * @ht_params: point to ht patameters
 293  * @bt_params: pointer to bt parameters
 294  * @pa_type: used by 6000 series only to identify the type of Power Amplifier
 295  * @need_temp_offset_calib: need to perform temperature offset calibration
 296  * @no_xtal_calib: some devices do not need crystal calibration data,
 297  *      don't send it to those
 298  * @scan_rx_antennas: available antenna for scan operation
 299  * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
 300  * @adv_pm: advance power management
 301  * @rx_with_siso_diversity: 1x1 device with rx antenna diversity
 302  * @internal_wimax_coex: internal wifi/wimax combo device
 303  * @iq_invert: I/Q inversion
 304  * @temp_offset_v2: support v2 of temperature offset calibration
 305  *
 306  * We enable the driver to be backward compatible wrt API version. The
 307  * driver specifies which APIs it supports (with @ucode_api_max being the
 308  * highest and @ucode_api_min the lowest). Firmware will only be loaded if
 309  * it has a supported API version.
 310  *
 311  * The ideal usage of this infrastructure is to treat a new ucode API
 312  * release as a new hardware revision.
 313  */
 314 struct iwl_cfg {
 315         /* params specific to an individual device within a device family */
 316         const char *name;
 317         const char *fw_name_pre;
 318         const unsigned int ucode_api_max;
 319         const unsigned int ucode_api_ok;
 320         const unsigned int ucode_api_min;
 321         u8   valid_tx_ant;
 322         u8   valid_rx_ant;
 323         u16  sku;
 324         u16  eeprom_ver;
 325         u16  eeprom_calib_ver;
 326         const struct iwl_lib_ops *lib;
 327         void (*additional_nic_config)(struct iwl_priv *priv);
 328         /* params not likely to change within a device family */
 329         struct iwl_base_params *base_params;
 330         /* params likely to change within a device family */
 331         struct iwl_ht_params *ht_params;
 332         struct iwl_bt_params *bt_params;
 333         enum iwl_pa_type pa_type;         /* if used set to IWL_PA_SYSTEM */
 334         const bool need_temp_offset_calib; /* if used set to true */
 335         const bool no_xtal_calib;
 336         u8 scan_rx_antennas[IEEE80211_NUM_BANDS];
 337         enum iwl_led_mode led_mode;
 338         const bool adv_pm;
 339         const bool rx_with_siso_diversity;
 340         const bool internal_wimax_coex;
 341         const bool iq_invert;
 342         const bool temp_offset_v2;
 343 };
 344
 345 /**
 346  * struct iwl_shared - shared fields for all the layers of the driver
 347  *
 348  * @dbg_level_dev: dbg level set per device. Prevails on
 349  *      iwlagn_mod_params.debug_level if set (!= 0)
 350  * @ucode_owner: IWL_OWNERSHIP_*
 351  * @cmd_queue: command queue number
 352  * @status: STATUS_*
 353  * @wowlan: are we running wowlan uCode
 354  * @valid_contexts: microcode/device supports multiple contexts
 355  * @bus: pointer to the bus layer data
 356  * @cfg: see struct iwl_cfg
 357  * @priv: pointer to the upper layer data
 358  * @trans: pointer to the transport layer data
 359  * @hw_params: see struct iwl_hw_params
 360  * @workqueue: the workqueue used by all the layers of the driver
 361  * @lock: protect general shared data
 362  * @sta_lock: protects the station table.
 363  *      If lock and sta_lock are needed, lock must be acquired first.
 364  * @mutex:
 365  * @wait_command_queue: the wait_queue for SYNC host command nad uCode load
 366  * @eeprom: pointer to the eeprom/OTP image
 367  * @ucode_type: indicator of loaded ucode image
 368  * @notif_waits: things waiting for notification
 369  * @notif_wait_lock: lock protecting notification
 370  * @notif_waitq: head of notification wait queue
 371  * @device_pointers: pointers to ucode event tables
 372  */
 373 struct iwl_shared {
 374 #ifdef CONFIG_IWLWIFI_DEBUG
 375         u32 dbg_level_dev;
 376 #endif /* CONFIG_IWLWIFI_DEBUG */
 377
 378 #define IWL_OWNERSHIP_DRIVER    0
 379 #define IWL_OWNERSHIP_TM        1
 380         u8 ucode_owner;
 381         u8 cmd_queue;
 382         unsigned long status;
 383         bool wowlan;
 384         u8 valid_contexts;
 385
 386         struct iwl_bus *bus;
 387         struct iwl_cfg *cfg;
 388         struct iwl_priv *priv;
 389         struct iwl_trans *trans;
 390         struct iwl_hw_params hw_params;
 391
 392         struct workqueue_struct *workqueue;
 393         spinlock_t lock;
 394         spinlock_t sta_lock;
 395         struct mutex mutex;
 396
 397         wait_queue_head_t wait_command_queue;
 398
 399         /* eeprom -- this is in the card's little endian byte order */
 400         u8 *eeprom;
 401
 402         /* ucode related variables */
 403         enum iwl_ucode_type ucode_type;
 404
 405         /* notification wait support */
 406         struct list_head notif_waits;
 407         spinlock_t notif_wait_lock;
 408         wait_queue_head_t notif_waitq;
 409
 410         struct {
 411                 u32 error_event_table;
 412                 u32 log_event_table;
 413         } device_pointers;
 414
 415 };
 416
 417 /*Whatever _m is (iwl_trans, iwl_priv, iwl_bus, these macros will work */
 418 #define priv(_m)        ((_m)->shrd->priv)
 419 #define cfg(_m)         ((_m)->shrd->cfg)
 420 #define bus(_m)         ((_m)->shrd->bus)
 421 #define trans(_m)       ((_m)->shrd->trans)
 422 #define hw_params(_m)   ((_m)->shrd->hw_params)
 423
 424 #ifdef CONFIG_IWLWIFI_DEBUG
 425 /*
 426  * iwl_get_debug_level: Return active debug level for device
 427  *
 428  * Using sysfs it is possible to set per device debug level. This debug
 429  * level will be used if set, otherwise the global debug level which can be
 430  * set via module parameter is used.
 431  */
 432 static inline u32 iwl_get_debug_level(struct iwl_shared *shrd)
 433 {
 434         if (shrd->dbg_level_dev)
 435                 return shrd->dbg_level_dev;
 436         else
 437                 return iwlagn_mod_params.debug_level;
 438 }
 439 #else
 440 static inline u32 iwl_get_debug_level(struct iwl_shared *shrd)
 441 {
 442         return iwlagn_mod_params.debug_level;
 443 }
 444 #endif
 445
 446 static inline void iwl_free_pages(struct iwl_shared *shrd, unsigned long page)
 447 {
 448         free_pages(page, shrd->hw_params.rx_page_order);
 449 }
 450
 451 /**
 452  * iwl_queue_inc_wrap - increment queue index, wrap back to beginning
 453  * @index -- current index
 454  * @n_bd -- total number of entries in queue (must be power of 2)
 455  */
 456 static inline int iwl_queue_inc_wrap(int index, int n_bd)
 457 {
 458         return ++index & (n_bd - 1);
 459 }
 460
 461 /**
 462  * iwl_queue_dec_wrap - decrement queue index, wrap back to end
 463  * @index -- current index
 464  * @n_bd -- total number of entries in queue (must be power of 2)
 465  */
 466 static inline int iwl_queue_dec_wrap(int index, int n_bd)
 467 {
 468         return --index & (n_bd - 1);
 469 }
 470
 471 struct iwl_rx_mem_buffer {
 472         dma_addr_t page_dma;
 473         struct page *page;
 474         struct list_head list;
 475 };
 476
 477 #define rxb_addr(r) page_address(r->page)
 478
 479 /*
 480  * mac80211 queues, ACs, hardware queues, FIFOs.
 481  *
 482  * Cf. http://wireless.kernel.org/en/developers/Documentation/mac80211/queues
 483  *
 484  * Mac80211 uses the following numbers, which we get as from it
 485  * by way of skb_get_queue_mapping(skb):
 486  *
 487  *      VO      0
 488  *      VI      1
 489  *      BE      2
 490  *      BK      3
 491  *
 492  *
 493  * Regular (not A-MPDU) frames are put into hardware queues corresponding
 494  * to the FIFOs, see comments in iwl-prph.h. Aggregated frames get their
 495  * own queue per aggregation session (RA/TID combination), such queues are
 496  * set up to map into FIFOs too, for which we need an AC->FIFO mapping. In
 497  * order to map frames to the right queue, we also need an AC->hw queue
 498  * mapping. This is implemented here.
 499  *
 500  * Due to the way hw queues are set up (by the hw specific modules like
 501  * iwl-4965.c, iwl-5000.c etc.), the AC->hw queue mapping is the identity
 502  * mapping.
 503  */
 504
 505 static const u8 tid_to_ac[] = {
 506         IEEE80211_AC_BE,
 507         IEEE80211_AC_BK,
 508         IEEE80211_AC_BK,
 509         IEEE80211_AC_BE,
 510         IEEE80211_AC_VI,
 511         IEEE80211_AC_VI,
 512         IEEE80211_AC_VO,
 513         IEEE80211_AC_VO
 514 };
 515
 516 static inline int get_ac_from_tid(u16 tid)
 517 {
 518         if (likely(tid < ARRAY_SIZE(tid_to_ac)))
 519                 return tid_to_ac[tid];
 520
 521         /* no support for TIDs 8-15 yet */
 522         return -EINVAL;
 523 }
 524
 525 enum iwl_rxon_context_id {
 526         IWL_RXON_CTX_BSS,
 527         IWL_RXON_CTX_PAN,
 528
 529         NUM_IWL_RXON_CTX
 530 };
 531
 532 int iwl_probe(struct iwl_bus *bus, const struct iwl_trans_ops *trans_ops,
 533                 struct iwl_cfg *cfg);
 534 void __devexit iwl_remove(struct iwl_priv * priv);
 535 struct iwl_device_cmd;
 536 int __must_check iwl_rx_dispatch(struct iwl_priv *priv,
 537                                  struct iwl_rx_mem_buffer *rxb,
 538                                  struct iwl_device_cmd *cmd);
 539
 540 int iwlagn_hw_valid_rtc_data_addr(u32 addr);
 541 void iwl_set_hw_rfkill_state(struct iwl_priv *priv, bool state);
 542 void iwl_nic_config(struct iwl_priv *priv);
 543 void iwl_free_skb(struct iwl_priv *priv, struct sk_buff *skb);
 544 void iwl_apm_stop(struct iwl_priv *priv);
 545 int iwl_apm_init(struct iwl_priv *priv);
 546 void iwlagn_fw_error(struct iwl_priv *priv, bool ondemand);
 547 const char *get_cmd_string(u8 cmd);
 548 bool iwl_check_for_ct_kill(struct iwl_priv *priv);
 549
 550 void iwl_stop_sw_queue(struct iwl_priv *priv, u8 ac);
 551 void iwl_wake_sw_queue(struct iwl_priv *priv, u8 ac);
 552
 553 /* notification wait support */
 554 void iwl_abort_notification_waits(struct iwl_shared *shrd);
 555 void __acquires(wait_entry)
 556 iwl_init_notification_wait(struct iwl_shared *shrd,
 557                               struct iwl_notification_wait *wait_entry,
 558                               u8 cmd,
 559                               void (*fn)(struct iwl_trans *trans,
 560                                          struct iwl_rx_packet *pkt,
 561                                          void *data),
 562                               void *fn_data);
 563 int __must_check __releases(wait_entry)
 564 iwl_wait_notification(struct iwl_shared *shrd,
 565                          struct iwl_notification_wait *wait_entry,
 566                          unsigned long timeout);
 567 void __releases(wait_entry)
 568 iwl_remove_notification(struct iwl_shared *shrd,
 569                            struct iwl_notification_wait *wait_entry);
 570
 571 #ifdef CONFIG_IWLWIFI_DEBUGFS
 572 void iwl_reset_traffic_log(struct iwl_priv *priv);
 573 #endif /* CONFIG_IWLWIFI_DEBUGFS */
 574
 575 #ifdef CONFIG_IWLWIFI_DEBUG
 576 void iwl_print_rx_config_cmd(struct iwl_priv *priv,
 577                              enum iwl_rxon_context_id ctxid);
 578 #else
 579 static inline void iwl_print_rx_config_cmd(struct iwl_priv *priv,
 580                                            enum iwl_rxon_context_id ctxid)
 581 {
 582 }
 583 #endif
 584
 585 #define IWL_CMD(x) case x: return #x
 586 #define IWL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo))))
 587
 588 #define IWL_TRAFFIC_ENTRIES     (256)
 589 #define IWL_TRAFFIC_ENTRY_SIZE  (64)
 590
 591 /*****************************************************
 592 * DRIVER STATUS FUNCTIONS
 593 ******************************************************/
 594 #define STATUS_HCMD_ACTIVE      0       /* host command in progress */
 595 /* 1 is unused (used to be STATUS_HCMD_SYNC_ACTIVE) */
 596 #define STATUS_INT_ENABLED      2
 597 #define STATUS_RF_KILL_HW       3
 598 #define STATUS_CT_KILL          4
 599 #define STATUS_INIT             5
 600 #define STATUS_ALIVE            6
 601 #define STATUS_READY            7
 602 #define STATUS_TEMPERATURE      8
 603 #define STATUS_GEO_CONFIGURED   9
 604 #define STATUS_EXIT_PENDING     10
 605 #define STATUS_STATISTICS       12
 606 #define STATUS_SCANNING         13
 607 #define STATUS_SCAN_ABORTING    14
 608 #define STATUS_SCAN_HW          15
 609 #define STATUS_POWER_PMI        16
 610 #define STATUS_FW_ERROR         17
 611 #define STATUS_DEVICE_ENABLED   18
 612 #define STATUS_CHANNEL_SWITCH_PENDING 19
 613 #define STATUS_SCAN_COMPLETE    20
 614
 615 static inline int iwl_is_ready(struct iwl_shared *shrd)
 616 {
 617         /* The adapter is 'ready' if READY and GEO_CONFIGURED bits are
 618          * set but EXIT_PENDING is not */
 619         return test_bit(STATUS_READY, &shrd->status) &&
 620                test_bit(STATUS_GEO_CONFIGURED, &shrd->status) &&
 621                !test_bit(STATUS_EXIT_PENDING, &shrd->status);
 622 }
 623
 624 static inline int iwl_is_alive(struct iwl_shared *shrd)
 625 {
 626         return test_bit(STATUS_ALIVE, &shrd->status);
 627 }
 628
 629 static inline int iwl_is_init(struct iwl_shared *shrd)
 630 {
 631         return test_bit(STATUS_INIT, &shrd->status);
 632 }
 633
 634 static inline int iwl_is_rfkill_hw(struct iwl_shared *shrd)
 635 {
 636         return test_bit(STATUS_RF_KILL_HW, &shrd->status);
 637 }
 638
 639 static inline int iwl_is_rfkill(struct iwl_shared *shrd)
 640 {
 641         return iwl_is_rfkill_hw(shrd);
 642 }
 643
 644 static inline int iwl_is_ctkill(struct iwl_shared *shrd)
 645 {
 646         return test_bit(STATUS_CT_KILL, &shrd->status);
 647 }
 648
 649 static inline int iwl_is_ready_rf(struct iwl_shared *shrd)
 650 {
 651         if (iwl_is_rfkill(shrd))
 652                 return 0;
 653
 654         return iwl_is_ready(shrd);
 655 }
 656
 657 #endif /* #__iwl_shared_h__ */