1 /******************************************************************************
3 * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
5 * Portions of this file are derived from the ipw3945 project, as well
6 * as portions of the ieee80211 subsystem header files.
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of version 2 of the GNU General Public License as
10 * published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but WITHOUT
13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
17 * You should have received a copy of the GNU General Public License along with
18 * this program; if not, write to the Free Software Foundation, Inc.,
19 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
21 * The full GNU General Public License is included in this distribution in the
22 * file called LICENSE.
24 * Contact Information:
25 * Intel Linux Wireless <ilw@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
28 *****************************************************************************/
30 #include <linux/kernel.h>
31 #include <linux/module.h>
32 #include <linux/init.h>
33 #include <linux/pci.h>
34 #include <linux/dma-mapping.h>
35 #include <linux/delay.h>
36 #include <linux/skbuff.h>
37 #include <linux/netdevice.h>
38 #include <linux/wireless.h>
39 #include <linux/firmware.h>
40 #include <linux/etherdevice.h>
41 #include <linux/if_arp.h>
43 #include <net/ieee80211_radiotap.h>
44 #include <net/lib80211.h>
45 #include <net/mac80211.h>
47 #include <asm/div64.h>
49 #define DRV_NAME "iwl3945"
52 #include "iwl-3945-fh.h"
53 #include "iwl-commands.h"
56 #include "iwl-helpers.h"
61 * module name, copyright, version, etc.
64 #define DRV_DESCRIPTION \
65 "Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux"
67 #ifdef CONFIG_IWLWIFI_DEBUG
73 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
79 #define IWL39_VERSION "1.2.26k" VD VS
80 #define DRV_COPYRIGHT "Copyright(c) 2003-2009 Intel Corporation"
81 #define DRV_AUTHOR "<ilw@linux.intel.com>"
82 #define DRV_VERSION IWL39_VERSION
85 MODULE_DESCRIPTION(DRV_DESCRIPTION
);
86 MODULE_VERSION(DRV_VERSION
);
87 MODULE_AUTHOR(DRV_COPYRIGHT
" " DRV_AUTHOR
);
88 MODULE_LICENSE("GPL");
90 /* module parameters */
91 struct iwl_mod_params iwl3945_mod_params
= {
92 .num_of_queues
= IWL39_NUM_QUEUES
, /* Not used */
95 /* the rest are 0 by default */
99 * iwl3945_get_antenna_flags - Get antenna flags for RXON command
100 * @priv: eeprom and antenna fields are used to determine antenna flags
102 * priv->eeprom39 is used to determine if antenna AUX/MAIN are reversed
103 * iwl3945_mod_params.antenna specifies the antenna diversity mode:
105 * IWL_ANTENNA_DIVERSITY - NIC selects best antenna by itself
106 * IWL_ANTENNA_MAIN - Force MAIN antenna
107 * IWL_ANTENNA_AUX - Force AUX antenna
109 __le32
iwl3945_get_antenna_flags(const struct iwl_priv
*priv
)
111 struct iwl3945_eeprom
*eeprom
= (struct iwl3945_eeprom
*)priv
->eeprom
;
113 switch (iwl3945_mod_params
.antenna
) {
114 case IWL_ANTENNA_DIVERSITY
:
117 case IWL_ANTENNA_MAIN
:
118 if (eeprom
->antenna_switch_type
)
119 return RXON_FLG_DIS_DIV_MSK
| RXON_FLG_ANT_B_MSK
;
120 return RXON_FLG_DIS_DIV_MSK
| RXON_FLG_ANT_A_MSK
;
122 case IWL_ANTENNA_AUX
:
123 if (eeprom
->antenna_switch_type
)
124 return RXON_FLG_DIS_DIV_MSK
| RXON_FLG_ANT_A_MSK
;
125 return RXON_FLG_DIS_DIV_MSK
| RXON_FLG_ANT_B_MSK
;
128 /* bad antenna selector value */
129 IWL_ERR(priv
, "Bad antenna selector value (0x%x)\n",
130 iwl3945_mod_params
.antenna
);
132 return 0; /* "diversity" is default if error */
135 static int iwl3945_set_ccmp_dynamic_key_info(struct iwl_priv
*priv
,
136 struct ieee80211_key_conf
*keyconf
,
140 __le16 key_flags
= 0;
143 key_flags
|= (STA_KEY_FLG_CCMP
| STA_KEY_FLG_MAP_KEY_MSK
);
144 key_flags
|= cpu_to_le16(keyconf
->keyidx
<< STA_KEY_FLG_KEYID_POS
);
146 if (sta_id
== priv
->hw_params
.bcast_sta_id
)
147 key_flags
|= STA_KEY_MULTICAST_MSK
;
149 keyconf
->flags
|= IEEE80211_KEY_FLAG_GENERATE_IV
;
150 keyconf
->hw_key_idx
= keyconf
->keyidx
;
151 key_flags
&= ~STA_KEY_FLG_INVALID
;
153 spin_lock_irqsave(&priv
->sta_lock
, flags
);
154 priv
->stations
[sta_id
].keyinfo
.alg
= keyconf
->alg
;
155 priv
->stations
[sta_id
].keyinfo
.keylen
= keyconf
->keylen
;
156 memcpy(priv
->stations
[sta_id
].keyinfo
.key
, keyconf
->key
,
159 memcpy(priv
->stations
[sta_id
].sta
.key
.key
, keyconf
->key
,
162 if ((priv
->stations
[sta_id
].sta
.key
.key_flags
& STA_KEY_FLG_ENCRYPT_MSK
)
163 == STA_KEY_FLG_NO_ENC
)
164 priv
->stations
[sta_id
].sta
.key
.key_offset
=
165 iwl_get_free_ucode_key_index(priv
);
166 /* else, we are overriding an existing key => no need to allocated room
169 WARN(priv
->stations
[sta_id
].sta
.key
.key_offset
== WEP_INVALID_OFFSET
,
170 "no space for a new key");
172 priv
->stations
[sta_id
].sta
.key
.key_flags
= key_flags
;
173 priv
->stations
[sta_id
].sta
.sta
.modify_mask
= STA_MODIFY_KEY_MASK
;
174 priv
->stations
[sta_id
].sta
.mode
= STA_CONTROL_MODIFY_MSK
;
176 IWL_DEBUG_INFO(priv
, "hwcrypto: modify ucode station key info\n");
178 ret
= iwl_send_add_sta(priv
, &priv
->stations
[sta_id
].sta
, CMD_ASYNC
);
180 spin_unlock_irqrestore(&priv
->sta_lock
, flags
);
185 static int iwl3945_set_tkip_dynamic_key_info(struct iwl_priv
*priv
,
186 struct ieee80211_key_conf
*keyconf
,
192 static int iwl3945_set_wep_dynamic_key_info(struct iwl_priv
*priv
,
193 struct ieee80211_key_conf
*keyconf
,
199 static int iwl3945_clear_sta_key_info(struct iwl_priv
*priv
, u8 sta_id
)
203 spin_lock_irqsave(&priv
->sta_lock
, flags
);
204 memset(&priv
->stations
[sta_id
].keyinfo
, 0, sizeof(struct iwl_hw_key
));
205 memset(&priv
->stations
[sta_id
].sta
.key
, 0,
206 sizeof(struct iwl4965_keyinfo
));
207 priv
->stations
[sta_id
].sta
.key
.key_flags
= STA_KEY_FLG_NO_ENC
;
208 priv
->stations
[sta_id
].sta
.sta
.modify_mask
= STA_MODIFY_KEY_MASK
;
209 priv
->stations
[sta_id
].sta
.mode
= STA_CONTROL_MODIFY_MSK
;
210 spin_unlock_irqrestore(&priv
->sta_lock
, flags
);
212 IWL_DEBUG_INFO(priv
, "hwcrypto: clear ucode station key info\n");
213 iwl_send_add_sta(priv
, &priv
->stations
[sta_id
].sta
, 0);
217 static int iwl3945_set_dynamic_key(struct iwl_priv
*priv
,
218 struct ieee80211_key_conf
*keyconf
, u8 sta_id
)
222 keyconf
->hw_key_idx
= HW_KEY_DYNAMIC
;
224 switch (keyconf
->alg
) {
226 ret
= iwl3945_set_ccmp_dynamic_key_info(priv
, keyconf
, sta_id
);
229 ret
= iwl3945_set_tkip_dynamic_key_info(priv
, keyconf
, sta_id
);
232 ret
= iwl3945_set_wep_dynamic_key_info(priv
, keyconf
, sta_id
);
235 IWL_ERR(priv
, "Unknown alg: %s alg = %d\n", __func__
, keyconf
->alg
);
239 IWL_DEBUG_WEP(priv
, "Set dynamic key: alg= %d len=%d idx=%d sta=%d ret=%d\n",
240 keyconf
->alg
, keyconf
->keylen
, keyconf
->keyidx
,
246 static int iwl3945_remove_static_key(struct iwl_priv
*priv
)
248 int ret
= -EOPNOTSUPP
;
253 static int iwl3945_set_static_key(struct iwl_priv
*priv
,
254 struct ieee80211_key_conf
*key
)
256 if (key
->alg
== ALG_WEP
)
259 IWL_ERR(priv
, "Static key invalid: alg %d\n", key
->alg
);
263 static void iwl3945_clear_free_frames(struct iwl_priv
*priv
)
265 struct list_head
*element
;
267 IWL_DEBUG_INFO(priv
, "%d frames on pre-allocated heap on clear.\n",
270 while (!list_empty(&priv
->free_frames
)) {
271 element
= priv
->free_frames
.next
;
273 kfree(list_entry(element
, struct iwl3945_frame
, list
));
274 priv
->frames_count
--;
277 if (priv
->frames_count
) {
278 IWL_WARN(priv
, "%d frames still in use. Did we lose one?\n",
280 priv
->frames_count
= 0;
284 static struct iwl3945_frame
*iwl3945_get_free_frame(struct iwl_priv
*priv
)
286 struct iwl3945_frame
*frame
;
287 struct list_head
*element
;
288 if (list_empty(&priv
->free_frames
)) {
289 frame
= kzalloc(sizeof(*frame
), GFP_KERNEL
);
291 IWL_ERR(priv
, "Could not allocate frame!\n");
295 priv
->frames_count
++;
299 element
= priv
->free_frames
.next
;
301 return list_entry(element
, struct iwl3945_frame
, list
);
304 static void iwl3945_free_frame(struct iwl_priv
*priv
, struct iwl3945_frame
*frame
)
306 memset(frame
, 0, sizeof(*frame
));
307 list_add(&frame
->list
, &priv
->free_frames
);
310 unsigned int iwl3945_fill_beacon_frame(struct iwl_priv
*priv
,
311 struct ieee80211_hdr
*hdr
,
315 if (!iwl_is_associated(priv
) || !priv
->ibss_beacon
||
316 ((priv
->iw_mode
!= NL80211_IFTYPE_ADHOC
) &&
317 (priv
->iw_mode
!= NL80211_IFTYPE_AP
)))
320 if (priv
->ibss_beacon
->len
> left
)
323 memcpy(hdr
, priv
->ibss_beacon
->data
, priv
->ibss_beacon
->len
);
325 return priv
->ibss_beacon
->len
;
328 static int iwl3945_send_beacon_cmd(struct iwl_priv
*priv
)
330 struct iwl3945_frame
*frame
;
331 unsigned int frame_size
;
335 frame
= iwl3945_get_free_frame(priv
);
338 IWL_ERR(priv
, "Could not obtain free frame buffer for beacon "
343 rate
= iwl_rate_get_lowest_plcp(priv
);
345 frame_size
= iwl3945_hw_get_beacon_cmd(priv
, frame
, rate
);
347 rc
= iwl_send_cmd_pdu(priv
, REPLY_TX_BEACON
, frame_size
,
350 iwl3945_free_frame(priv
, frame
);
355 static void iwl3945_unset_hw_params(struct iwl_priv
*priv
)
357 if (priv
->shared_virt
)
358 pci_free_consistent(priv
->pci_dev
,
359 sizeof(struct iwl3945_shared
),
364 static void iwl3945_build_tx_cmd_hwcrypto(struct iwl_priv
*priv
,
365 struct ieee80211_tx_info
*info
,
366 struct iwl_device_cmd
*cmd
,
367 struct sk_buff
*skb_frag
,
370 struct iwl3945_tx_cmd
*tx
= (struct iwl3945_tx_cmd
*)cmd
->cmd
.payload
;
371 struct iwl_hw_key
*keyinfo
= &priv
->stations
[sta_id
].keyinfo
;
373 switch (keyinfo
->alg
) {
375 tx
->sec_ctl
= TX_CMD_SEC_CCM
;
376 memcpy(tx
->key
, keyinfo
->key
, keyinfo
->keylen
);
377 IWL_DEBUG_TX(priv
, "tx_cmd with AES hwcrypto\n");
384 tx
->sec_ctl
= TX_CMD_SEC_WEP
|
385 (info
->control
.hw_key
->hw_key_idx
& TX_CMD_SEC_MSK
) << TX_CMD_SEC_SHIFT
;
387 if (keyinfo
->keylen
== 13)
388 tx
->sec_ctl
|= TX_CMD_SEC_KEY128
;
390 memcpy(&tx
->key
[3], keyinfo
->key
, keyinfo
->keylen
);
392 IWL_DEBUG_TX(priv
, "Configuring packet for WEP encryption "
393 "with key %d\n", info
->control
.hw_key
->hw_key_idx
);
397 IWL_ERR(priv
, "Unknown encode alg %d\n", keyinfo
->alg
);
403 * handle build REPLY_TX command notification.
405 static void iwl3945_build_tx_cmd_basic(struct iwl_priv
*priv
,
406 struct iwl_device_cmd
*cmd
,
407 struct ieee80211_tx_info
*info
,
408 struct ieee80211_hdr
*hdr
, u8 std_id
)
410 struct iwl3945_tx_cmd
*tx
= (struct iwl3945_tx_cmd
*)cmd
->cmd
.payload
;
411 __le32 tx_flags
= tx
->tx_flags
;
412 __le16 fc
= hdr
->frame_control
;
413 u8 rc_flags
= info
->control
.rates
[0].flags
;
415 tx
->stop_time
.life_time
= TX_CMD_LIFE_TIME_INFINITE
;
416 if (!(info
->flags
& IEEE80211_TX_CTL_NO_ACK
)) {
417 tx_flags
|= TX_CMD_FLG_ACK_MSK
;
418 if (ieee80211_is_mgmt(fc
))
419 tx_flags
|= TX_CMD_FLG_SEQ_CTL_MSK
;
420 if (ieee80211_is_probe_resp(fc
) &&
421 !(le16_to_cpu(hdr
->seq_ctrl
) & 0xf))
422 tx_flags
|= TX_CMD_FLG_TSF_MSK
;
424 tx_flags
&= (~TX_CMD_FLG_ACK_MSK
);
425 tx_flags
|= TX_CMD_FLG_SEQ_CTL_MSK
;
429 if (ieee80211_has_morefrags(fc
))
430 tx_flags
|= TX_CMD_FLG_MORE_FRAG_MSK
;
432 if (ieee80211_is_data_qos(fc
)) {
433 u8
*qc
= ieee80211_get_qos_ctl(hdr
);
434 tx
->tid_tspec
= qc
[0] & 0xf;
435 tx_flags
&= ~TX_CMD_FLG_SEQ_CTL_MSK
;
437 tx_flags
|= TX_CMD_FLG_SEQ_CTL_MSK
;
440 if (rc_flags
& IEEE80211_TX_RC_USE_RTS_CTS
) {
441 tx_flags
|= TX_CMD_FLG_RTS_MSK
;
442 tx_flags
&= ~TX_CMD_FLG_CTS_MSK
;
443 } else if (rc_flags
& IEEE80211_TX_RC_USE_CTS_PROTECT
) {
444 tx_flags
&= ~TX_CMD_FLG_RTS_MSK
;
445 tx_flags
|= TX_CMD_FLG_CTS_MSK
;
448 if ((tx_flags
& TX_CMD_FLG_RTS_MSK
) || (tx_flags
& TX_CMD_FLG_CTS_MSK
))
449 tx_flags
|= TX_CMD_FLG_FULL_TXOP_PROT_MSK
;
451 tx_flags
&= ~(TX_CMD_FLG_ANT_SEL_MSK
);
452 if (ieee80211_is_mgmt(fc
)) {
453 if (ieee80211_is_assoc_req(fc
) || ieee80211_is_reassoc_req(fc
))
454 tx
->timeout
.pm_frame_timeout
= cpu_to_le16(3);
456 tx
->timeout
.pm_frame_timeout
= cpu_to_le16(2);
458 tx
->timeout
.pm_frame_timeout
= 0;
459 #ifdef CONFIG_IWLWIFI_LEDS
460 priv
->rxtxpackets
+= le16_to_cpu(cmd
->cmd
.tx
.len
);
465 tx
->tx_flags
= tx_flags
;
466 tx
->next_frame_len
= 0;
470 * start REPLY_TX command process
472 static int iwl3945_tx_skb(struct iwl_priv
*priv
, struct sk_buff
*skb
)
474 struct ieee80211_hdr
*hdr
= (struct ieee80211_hdr
*)skb
->data
;
475 struct ieee80211_tx_info
*info
= IEEE80211_SKB_CB(skb
);
476 struct iwl3945_tx_cmd
*tx
;
477 struct iwl_tx_queue
*txq
= NULL
;
478 struct iwl_queue
*q
= NULL
;
479 struct iwl_device_cmd
*out_cmd
;
480 struct iwl_cmd_meta
*out_meta
;
481 dma_addr_t phys_addr
;
482 dma_addr_t txcmd_phys
;
483 int txq_id
= skb_get_queue_mapping(skb
);
484 u16 len
, idx
, len_org
, hdr_len
; /* TODO: len_org is not used */
491 u8 wait_write_ptr
= 0;
496 spin_lock_irqsave(&priv
->lock
, flags
);
497 if (iwl_is_rfkill(priv
)) {
498 IWL_DEBUG_DROP(priv
, "Dropping - RF KILL\n");
502 if ((ieee80211_get_tx_rate(priv
->hw
, info
)->hw_value
& 0xFF) == IWL_INVALID_RATE
) {
503 IWL_ERR(priv
, "ERROR: No TX rate available.\n");
507 unicast
= !is_multicast_ether_addr(hdr
->addr1
);
510 fc
= hdr
->frame_control
;
512 #ifdef CONFIG_IWLWIFI_DEBUG
513 if (ieee80211_is_auth(fc
))
514 IWL_DEBUG_TX(priv
, "Sending AUTH frame\n");
515 else if (ieee80211_is_assoc_req(fc
))
516 IWL_DEBUG_TX(priv
, "Sending ASSOC frame\n");
517 else if (ieee80211_is_reassoc_req(fc
))
518 IWL_DEBUG_TX(priv
, "Sending REASSOC frame\n");
521 /* drop all non-injected data frame if we are not associated */
522 if (ieee80211_is_data(fc
) &&
523 !(info
->flags
& IEEE80211_TX_CTL_INJECTED
) &&
524 (!iwl_is_associated(priv
) ||
525 ((priv
->iw_mode
== NL80211_IFTYPE_STATION
) && !priv
->assoc_id
))) {
526 IWL_DEBUG_DROP(priv
, "Dropping - !iwl_is_associated\n");
530 spin_unlock_irqrestore(&priv
->lock
, flags
);
532 hdr_len
= ieee80211_hdrlen(fc
);
534 /* Find (or create) index into station table for destination station */
535 if (info
->flags
& IEEE80211_TX_CTL_INJECTED
)
536 sta_id
= priv
->hw_params
.bcast_sta_id
;
538 sta_id
= iwl_get_sta_id(priv
, hdr
);
539 if (sta_id
== IWL_INVALID_STATION
) {
540 IWL_DEBUG_DROP(priv
, "Dropping - INVALID STATION: %pM\n",
545 IWL_DEBUG_RATE(priv
, "station Id %d\n", sta_id
);
547 if (ieee80211_is_data_qos(fc
)) {
548 qc
= ieee80211_get_qos_ctl(hdr
);
549 tid
= qc
[0] & IEEE80211_QOS_CTL_TID_MASK
;
550 if (unlikely(tid
>= MAX_TID_COUNT
))
552 seq_number
= priv
->stations
[sta_id
].tid
[tid
].seq_number
&
554 hdr
->seq_ctrl
= cpu_to_le16(seq_number
) |
556 cpu_to_le16(IEEE80211_SCTL_FRAG
));
560 /* Descriptor for chosen Tx queue */
561 txq
= &priv
->txq
[txq_id
];
564 spin_lock_irqsave(&priv
->lock
, flags
);
566 idx
= get_cmd_index(q
, q
->write_ptr
, 0);
568 /* Set up driver data for this TFD */
569 memset(&(txq
->txb
[q
->write_ptr
]), 0, sizeof(struct iwl_tx_info
));
570 txq
->txb
[q
->write_ptr
].skb
[0] = skb
;
572 /* Init first empty entry in queue's array of Tx/cmd buffers */
573 out_cmd
= txq
->cmd
[idx
];
574 out_meta
= &txq
->meta
[idx
];
575 tx
= (struct iwl3945_tx_cmd
*)out_cmd
->cmd
.payload
;
576 memset(&out_cmd
->hdr
, 0, sizeof(out_cmd
->hdr
));
577 memset(tx
, 0, sizeof(*tx
));
580 * Set up the Tx-command (not MAC!) header.
581 * Store the chosen Tx queue and TFD index within the sequence field;
582 * after Tx, uCode's Tx response will return this value so driver can
583 * locate the frame within the tx queue and do post-tx processing.
585 out_cmd
->hdr
.cmd
= REPLY_TX
;
586 out_cmd
->hdr
.sequence
= cpu_to_le16((u16
)(QUEUE_TO_SEQ(txq_id
) |
587 INDEX_TO_SEQ(q
->write_ptr
)));
589 /* Copy MAC header from skb into command buffer */
590 memcpy(tx
->hdr
, hdr
, hdr_len
);
593 if (info
->control
.hw_key
)
594 iwl3945_build_tx_cmd_hwcrypto(priv
, info
, out_cmd
, skb
, sta_id
);
596 /* TODO need this for burst mode later on */
597 iwl3945_build_tx_cmd_basic(priv
, out_cmd
, info
, hdr
, sta_id
);
599 /* set is_hcca to 0; it probably will never be implemented */
600 iwl3945_hw_build_tx_cmd_rate(priv
, out_cmd
, info
, hdr
, sta_id
, 0);
602 /* Total # bytes to be transmitted */
604 tx
->len
= cpu_to_le16(len
);
606 iwl_dbg_log_tx_data_frame(priv
, len
, hdr
);
607 iwl_update_stats(priv
, true, fc
, len
);
608 tx
->tx_flags
&= ~TX_CMD_FLG_ANT_A_MSK
;
609 tx
->tx_flags
&= ~TX_CMD_FLG_ANT_B_MSK
;
611 if (!ieee80211_has_morefrags(hdr
->frame_control
)) {
612 txq
->need_update
= 1;
614 priv
->stations
[sta_id
].tid
[tid
].seq_number
= seq_number
;
617 txq
->need_update
= 0;
620 IWL_DEBUG_TX(priv
, "sequence nr = 0X%x \n",
621 le16_to_cpu(out_cmd
->hdr
.sequence
));
622 IWL_DEBUG_TX(priv
, "tx_flags = 0X%x \n", le32_to_cpu(tx
->tx_flags
));
623 iwl_print_hex_dump(priv
, IWL_DL_TX
, tx
, sizeof(*tx
));
624 iwl_print_hex_dump(priv
, IWL_DL_TX
, (u8
*)tx
->hdr
,
625 ieee80211_hdrlen(fc
));
628 * Use the first empty entry in this queue's command buffer array
629 * to contain the Tx command and MAC header concatenated together
630 * (payload data will be in another buffer).
631 * Size of this varies, due to varying MAC header length.
632 * If end is not dword aligned, we'll have 2 extra bytes at the end
633 * of the MAC header (device reads on dword boundaries).
634 * We'll tell device about this padding later.
636 len
= sizeof(struct iwl3945_tx_cmd
) +
637 sizeof(struct iwl_cmd_header
) + hdr_len
;
640 len
= (len
+ 3) & ~3;
647 /* Physical address of this Tx command's header (not MAC header!),
648 * within command buffer array. */
649 txcmd_phys
= pci_map_single(priv
->pci_dev
, &out_cmd
->hdr
,
650 len
, PCI_DMA_TODEVICE
);
651 /* we do not map meta data ... so we can safely access address to
652 * provide to unmap command*/
653 pci_unmap_addr_set(out_meta
, mapping
, txcmd_phys
);
654 pci_unmap_len_set(out_meta
, len
, len
);
656 /* Add buffer containing Tx command and MAC(!) header to TFD's
658 priv
->cfg
->ops
->lib
->txq_attach_buf_to_tfd(priv
, txq
,
659 txcmd_phys
, len
, 1, 0);
662 /* Set up TFD's 2nd entry to point directly to remainder of skb,
663 * if any (802.11 null frames have no payload). */
664 len
= skb
->len
- hdr_len
;
666 phys_addr
= pci_map_single(priv
->pci_dev
, skb
->data
+ hdr_len
,
667 len
, PCI_DMA_TODEVICE
);
668 priv
->cfg
->ops
->lib
->txq_attach_buf_to_tfd(priv
, txq
,
674 /* Tell device the write index *just past* this latest filled TFD */
675 q
->write_ptr
= iwl_queue_inc_wrap(q
->write_ptr
, q
->n_bd
);
676 rc
= iwl_txq_update_write_ptr(priv
, txq
);
677 spin_unlock_irqrestore(&priv
->lock
, flags
);
682 if ((iwl_queue_space(q
) < q
->high_mark
)
683 && priv
->mac80211_registered
) {
684 if (wait_write_ptr
) {
685 spin_lock_irqsave(&priv
->lock
, flags
);
686 txq
->need_update
= 1;
687 iwl_txq_update_write_ptr(priv
, txq
);
688 spin_unlock_irqrestore(&priv
->lock
, flags
);
691 iwl_stop_queue(priv
, skb_get_queue_mapping(skb
));
697 spin_unlock_irqrestore(&priv
->lock
, flags
);
702 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
704 #include "iwl-spectrum.h"
706 #define BEACON_TIME_MASK_LOW 0x00FFFFFF
707 #define BEACON_TIME_MASK_HIGH 0xFF000000
708 #define TIME_UNIT 1024
711 * extended beacon time format
712 * time in usec will be changed into a 32-bit value in 8:24 format
713 * the high 1 byte is the beacon counts
714 * the lower 3 bytes is the time in usec within one beacon interval
717 static u32
iwl3945_usecs_to_beacons(u32 usec
, u32 beacon_interval
)
721 u32 interval
= beacon_interval
* 1024;
723 if (!interval
|| !usec
)
726 quot
= (usec
/ interval
) & (BEACON_TIME_MASK_HIGH
>> 24);
727 rem
= (usec
% interval
) & BEACON_TIME_MASK_LOW
;
729 return (quot
<< 24) + rem
;
732 /* base is usually what we get from ucode with each received frame,
733 * the same as HW timer counter counting down
736 static __le32
iwl3945_add_beacon_time(u32 base
, u32 addon
, u32 beacon_interval
)
738 u32 base_low
= base
& BEACON_TIME_MASK_LOW
;
739 u32 addon_low
= addon
& BEACON_TIME_MASK_LOW
;
740 u32 interval
= beacon_interval
* TIME_UNIT
;
741 u32 res
= (base
& BEACON_TIME_MASK_HIGH
) +
742 (addon
& BEACON_TIME_MASK_HIGH
);
744 if (base_low
> addon_low
)
745 res
+= base_low
- addon_low
;
746 else if (base_low
< addon_low
) {
747 res
+= interval
+ base_low
- addon_low
;
752 return cpu_to_le32(res
);
755 static int iwl3945_get_measurement(struct iwl_priv
*priv
,
756 struct ieee80211_measurement_params
*params
,
759 struct iwl_spectrum_cmd spectrum
;
760 struct iwl_rx_packet
*res
;
761 struct iwl_host_cmd cmd
= {
762 .id
= REPLY_SPECTRUM_MEASUREMENT_CMD
,
763 .data
= (void *)&spectrum
,
764 .flags
= CMD_WANT_SKB
,
766 u32 add_time
= le64_to_cpu(params
->start_time
);
768 int spectrum_resp_status
;
769 int duration
= le16_to_cpu(params
->duration
);
771 if (iwl_is_associated(priv
))
773 iwl3945_usecs_to_beacons(
774 le64_to_cpu(params
->start_time
) - priv
->last_tsf
,
775 le16_to_cpu(priv
->rxon_timing
.beacon_interval
));
777 memset(&spectrum
, 0, sizeof(spectrum
));
779 spectrum
.channel_count
= cpu_to_le16(1);
781 RXON_FLG_TSF2HOST_MSK
| RXON_FLG_ANT_A_MSK
| RXON_FLG_DIS_DIV_MSK
;
782 spectrum
.filter_flags
= MEASUREMENT_FILTER_FLAG
;
783 cmd
.len
= sizeof(spectrum
);
784 spectrum
.len
= cpu_to_le16(cmd
.len
- sizeof(spectrum
.len
));
786 if (iwl_is_associated(priv
))
787 spectrum
.start_time
=
788 iwl3945_add_beacon_time(priv
->last_beacon_time
,
790 le16_to_cpu(priv
->rxon_timing
.beacon_interval
));
792 spectrum
.start_time
= 0;
794 spectrum
.channels
[0].duration
= cpu_to_le32(duration
* TIME_UNIT
);
795 spectrum
.channels
[0].channel
= params
->channel
;
796 spectrum
.channels
[0].type
= type
;
797 if (priv
->active_rxon
.flags
& RXON_FLG_BAND_24G_MSK
)
798 spectrum
.flags
|= RXON_FLG_BAND_24G_MSK
|
799 RXON_FLG_AUTO_DETECT_MSK
| RXON_FLG_TGG_PROTECT_MSK
;
801 rc
= iwl_send_cmd_sync(priv
, &cmd
);
805 res
= (struct iwl_rx_packet
*)cmd
.reply_skb
->data
;
806 if (res
->hdr
.flags
& IWL_CMD_FAILED_MSK
) {
807 IWL_ERR(priv
, "Bad return from REPLY_RX_ON_ASSOC command\n");
811 spectrum_resp_status
= le16_to_cpu(res
->u
.spectrum
.status
);
812 switch (spectrum_resp_status
) {
813 case 0: /* Command will be handled */
814 if (res
->u
.spectrum
.id
!= 0xff) {
815 IWL_DEBUG_INFO(priv
, "Replaced existing measurement: %d\n",
817 priv
->measurement_status
&= ~MEASUREMENT_READY
;
819 priv
->measurement_status
|= MEASUREMENT_ACTIVE
;
823 case 1: /* Command will not be handled */
828 dev_kfree_skb_any(cmd
.reply_skb
);
834 static void iwl3945_rx_reply_alive(struct iwl_priv
*priv
,
835 struct iwl_rx_mem_buffer
*rxb
)
837 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
838 struct iwl_alive_resp
*palive
;
839 struct delayed_work
*pwork
;
841 palive
= &pkt
->u
.alive_frame
;
843 IWL_DEBUG_INFO(priv
, "Alive ucode status 0x%08X revision "
845 palive
->is_valid
, palive
->ver_type
,
846 palive
->ver_subtype
);
848 if (palive
->ver_subtype
== INITIALIZE_SUBTYPE
) {
849 IWL_DEBUG_INFO(priv
, "Initialization Alive received.\n");
850 memcpy(&priv
->card_alive_init
, &pkt
->u
.alive_frame
,
851 sizeof(struct iwl_alive_resp
));
852 pwork
= &priv
->init_alive_start
;
854 IWL_DEBUG_INFO(priv
, "Runtime Alive received.\n");
855 memcpy(&priv
->card_alive
, &pkt
->u
.alive_frame
,
856 sizeof(struct iwl_alive_resp
));
857 pwork
= &priv
->alive_start
;
858 iwl3945_disable_events(priv
);
861 /* We delay the ALIVE response by 5ms to
862 * give the HW RF Kill time to activate... */
863 if (palive
->is_valid
== UCODE_VALID_OK
)
864 queue_delayed_work(priv
->workqueue
, pwork
,
865 msecs_to_jiffies(5));
867 IWL_WARN(priv
, "uCode did not respond OK.\n");
870 static void iwl3945_rx_reply_add_sta(struct iwl_priv
*priv
,
871 struct iwl_rx_mem_buffer
*rxb
)
873 #ifdef CONFIG_IWLWIFI_DEBUG
874 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
877 IWL_DEBUG_RX(priv
, "Received REPLY_ADD_STA: 0x%02X\n", pkt
->u
.status
);
881 static void iwl3945_bg_beacon_update(struct work_struct
*work
)
883 struct iwl_priv
*priv
=
884 container_of(work
, struct iwl_priv
, beacon_update
);
885 struct sk_buff
*beacon
;
887 /* Pull updated AP beacon from mac80211. will fail if not in AP mode */
888 beacon
= ieee80211_beacon_get(priv
->hw
, priv
->vif
);
891 IWL_ERR(priv
, "update beacon failed\n");
895 mutex_lock(&priv
->mutex
);
896 /* new beacon skb is allocated every time; dispose previous.*/
897 if (priv
->ibss_beacon
)
898 dev_kfree_skb(priv
->ibss_beacon
);
900 priv
->ibss_beacon
= beacon
;
901 mutex_unlock(&priv
->mutex
);
903 iwl3945_send_beacon_cmd(priv
);
906 static void iwl3945_rx_beacon_notif(struct iwl_priv
*priv
,
907 struct iwl_rx_mem_buffer
*rxb
)
909 #ifdef CONFIG_IWLWIFI_DEBUG
910 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
911 struct iwl3945_beacon_notif
*beacon
= &(pkt
->u
.beacon_status
);
912 u8 rate
= beacon
->beacon_notify_hdr
.rate
;
914 IWL_DEBUG_RX(priv
, "beacon status %x retries %d iss %d "
915 "tsf %d %d rate %d\n",
916 le32_to_cpu(beacon
->beacon_notify_hdr
.status
) & TX_STATUS_MSK
,
917 beacon
->beacon_notify_hdr
.failure_frame
,
918 le32_to_cpu(beacon
->ibss_mgr_status
),
919 le32_to_cpu(beacon
->high_tsf
),
920 le32_to_cpu(beacon
->low_tsf
), rate
);
923 if ((priv
->iw_mode
== NL80211_IFTYPE_AP
) &&
924 (!test_bit(STATUS_EXIT_PENDING
, &priv
->status
)))
925 queue_work(priv
->workqueue
, &priv
->beacon_update
);
928 /* Handle notification from uCode that card's power state is changing
929 * due to software, hardware, or critical temperature RFKILL */
930 static void iwl3945_rx_card_state_notif(struct iwl_priv
*priv
,
931 struct iwl_rx_mem_buffer
*rxb
)
933 struct iwl_rx_packet
*pkt
= (void *)rxb
->skb
->data
;
934 u32 flags
= le32_to_cpu(pkt
->u
.card_state_notif
.flags
);
935 unsigned long status
= priv
->status
;
937 IWL_WARN(priv
, "Card state received: HW:%s SW:%s\n",
938 (flags
& HW_CARD_DISABLED
) ? "Kill" : "On",
939 (flags
& SW_CARD_DISABLED
) ? "Kill" : "On");
941 iwl_write32(priv
, CSR_UCODE_DRV_GP1_SET
,
942 CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED
);
944 if (flags
& HW_CARD_DISABLED
)
945 set_bit(STATUS_RF_KILL_HW
, &priv
->status
);
947 clear_bit(STATUS_RF_KILL_HW
, &priv
->status
);
950 iwl_scan_cancel(priv
);
952 if ((test_bit(STATUS_RF_KILL_HW
, &status
) !=
953 test_bit(STATUS_RF_KILL_HW
, &priv
->status
)))
954 wiphy_rfkill_set_hw_state(priv
->hw
->wiphy
,
955 test_bit(STATUS_RF_KILL_HW
, &priv
->status
));
957 wake_up_interruptible(&priv
->wait_command_queue
);
961 * iwl3945_setup_rx_handlers - Initialize Rx handler callbacks
963 * Setup the RX handlers for each of the reply types sent from the uCode
966 * This function chains into the hardware specific files for them to setup
967 * any hardware specific handlers as well.
969 static void iwl3945_setup_rx_handlers(struct iwl_priv
*priv
)
971 priv
->rx_handlers
[REPLY_ALIVE
] = iwl3945_rx_reply_alive
;
972 priv
->rx_handlers
[REPLY_ADD_STA
] = iwl3945_rx_reply_add_sta
;
973 priv
->rx_handlers
[REPLY_ERROR
] = iwl_rx_reply_error
;
974 priv
->rx_handlers
[CHANNEL_SWITCH_NOTIFICATION
] = iwl_rx_csa
;
975 priv
->rx_handlers
[PM_SLEEP_NOTIFICATION
] = iwl_rx_pm_sleep_notif
;
976 priv
->rx_handlers
[PM_DEBUG_STATISTIC_NOTIFIC
] =
977 iwl_rx_pm_debug_statistics_notif
;
978 priv
->rx_handlers
[BEACON_NOTIFICATION
] = iwl3945_rx_beacon_notif
;
981 * The same handler is used for both the REPLY to a discrete
982 * statistics request from the host as well as for the periodic
983 * statistics notifications (after received beacons) from the uCode.
985 priv
->rx_handlers
[REPLY_STATISTICS_CMD
] = iwl3945_hw_rx_statistics
;
986 priv
->rx_handlers
[STATISTICS_NOTIFICATION
] = iwl3945_hw_rx_statistics
;
988 iwl_setup_spectrum_handlers(priv
);
989 iwl_setup_rx_scan_handlers(priv
);
990 priv
->rx_handlers
[CARD_STATE_NOTIFICATION
] = iwl3945_rx_card_state_notif
;
992 /* Set up hardware specific Rx handlers */
993 iwl3945_hw_rx_handler_setup(priv
);
996 /************************** RX-FUNCTIONS ****************************/
998 * Rx theory of operation
1000 * The host allocates 32 DMA target addresses and passes the host address
1001 * to the firmware at register IWL_RFDS_TABLE_LOWER + N * RFD_SIZE where N is
1005 * The host/firmware share two index registers for managing the Rx buffers.
1007 * The READ index maps to the first position that the firmware may be writing
1008 * to -- the driver can read up to (but not including) this position and get
1010 * The READ index is managed by the firmware once the card is enabled.
1012 * The WRITE index maps to the last position the driver has read from -- the
1013 * position preceding WRITE is the last slot the firmware can place a packet.
1015 * The queue is empty (no good data) if WRITE = READ - 1, and is full if
1018 * During initialization, the host sets up the READ queue position to the first
1019 * INDEX position, and WRITE to the last (READ - 1 wrapped)
1021 * When the firmware places a packet in a buffer, it will advance the READ index
1022 * and fire the RX interrupt. The driver can then query the READ index and
1023 * process as many packets as possible, moving the WRITE index forward as it
1024 * resets the Rx queue buffers with new memory.
1026 * The management in the driver is as follows:
1027 * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When
1028 * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
1029 * to replenish the iwl->rxq->rx_free.
1030 * + In iwl3945_rx_replenish (scheduled) if 'processed' != 'read' then the
1031 * iwl->rxq is replenished and the READ INDEX is updated (updating the
1032 * 'processed' and 'read' driver indexes as well)
1033 * + A received packet is processed and handed to the kernel network stack,
1034 * detached from the iwl->rxq. The driver 'processed' index is updated.
1035 * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
1036 * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
1037 * INDEX is not incremented and iwl->status(RX_STALLED) is set. If there
1038 * were enough free buffers and RX_STALLED is set it is cleared.
1043 * iwl3945_rx_replenish() Replenishes rx_free list from rx_used, and calls
1044 * iwl3945_rx_queue_restock
1045 * iwl3945_rx_queue_restock() Moves available buffers from rx_free into Rx
1046 * queue, updates firmware pointers, and updates
1047 * the WRITE index. If insufficient rx_free buffers
1048 * are available, schedules iwl3945_rx_replenish
1050 * -- enable interrupts --
1051 * ISR - iwl3945_rx() Detach iwl_rx_mem_buffers from pool up to the
1052 * READ INDEX, detaching the SKB from the pool.
1053 * Moves the packet buffer from queue to rx_used.
1054 * Calls iwl3945_rx_queue_restock to refill any empty
1061 * iwl3945_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
1063 static inline __le32
iwl3945_dma_addr2rbd_ptr(struct iwl_priv
*priv
,
1064 dma_addr_t dma_addr
)
1066 return cpu_to_le32((u32
)dma_addr
);
1070 * iwl3945_rx_queue_restock - refill RX queue from pre-allocated pool
1072 * If there are slots in the RX queue that need to be restocked,
1073 * and we have free pre-allocated buffers, fill the ranks as much
1074 * as we can, pulling from rx_free.
1076 * This moves the 'write' index forward to catch up with 'processed', and
1077 * also updates the memory address in the firmware to reference the new
1080 static int iwl3945_rx_queue_restock(struct iwl_priv
*priv
)
1082 struct iwl_rx_queue
*rxq
= &priv
->rxq
;
1083 struct list_head
*element
;
1084 struct iwl_rx_mem_buffer
*rxb
;
1085 unsigned long flags
;
1088 spin_lock_irqsave(&rxq
->lock
, flags
);
1089 write
= rxq
->write
& ~0x7;
1090 while ((iwl_rx_queue_space(rxq
) > 0) && (rxq
->free_count
)) {
1091 /* Get next free Rx buffer, remove from free list */
1092 element
= rxq
->rx_free
.next
;
1093 rxb
= list_entry(element
, struct iwl_rx_mem_buffer
, list
);
1096 /* Point to Rx buffer via next RBD in circular buffer */
1097 rxq
->bd
[rxq
->write
] = iwl3945_dma_addr2rbd_ptr(priv
, rxb
->real_dma_addr
);
1098 rxq
->queue
[rxq
->write
] = rxb
;
1099 rxq
->write
= (rxq
->write
+ 1) & RX_QUEUE_MASK
;
1102 spin_unlock_irqrestore(&rxq
->lock
, flags
);
1103 /* If the pre-allocated buffer pool is dropping low, schedule to
1105 if (rxq
->free_count
<= RX_LOW_WATERMARK
)
1106 queue_work(priv
->workqueue
, &priv
->rx_replenish
);
1109 /* If we've added more space for the firmware to place data, tell it.
1110 * Increment device's write pointer in multiples of 8. */
1111 if ((rxq
->write_actual
!= (rxq
->write
& ~0x7))
1112 || (abs(rxq
->write
- rxq
->read
) > 7)) {
1113 spin_lock_irqsave(&rxq
->lock
, flags
);
1114 rxq
->need_update
= 1;
1115 spin_unlock_irqrestore(&rxq
->lock
, flags
);
1116 rc
= iwl_rx_queue_update_write_ptr(priv
, rxq
);
1125 * iwl3945_rx_replenish - Move all used packet from rx_used to rx_free
1127 * When moving to rx_free an SKB is allocated for the slot.
1129 * Also restock the Rx queue via iwl3945_rx_queue_restock.
1130 * This is called as a scheduled work item (except for during initialization)
1132 static void iwl3945_rx_allocate(struct iwl_priv
*priv
, gfp_t priority
)
1134 struct iwl_rx_queue
*rxq
= &priv
->rxq
;
1135 struct list_head
*element
;
1136 struct iwl_rx_mem_buffer
*rxb
;
1137 struct sk_buff
*skb
;
1138 unsigned long flags
;
1141 spin_lock_irqsave(&rxq
->lock
, flags
);
1143 if (list_empty(&rxq
->rx_used
)) {
1144 spin_unlock_irqrestore(&rxq
->lock
, flags
);
1147 spin_unlock_irqrestore(&rxq
->lock
, flags
);
1149 /* Alloc a new receive buffer */
1150 skb
= alloc_skb(priv
->hw_params
.rx_buf_size
, priority
);
1152 if (net_ratelimit())
1153 IWL_CRIT(priv
, ": Can not allocate SKB buffers\n");
1154 /* We don't reschedule replenish work here -- we will
1155 * call the restock method and if it still needs
1156 * more buffers it will schedule replenish */
1160 spin_lock_irqsave(&rxq
->lock
, flags
);
1161 if (list_empty(&rxq
->rx_used
)) {
1162 spin_unlock_irqrestore(&rxq
->lock
, flags
);
1163 dev_kfree_skb_any(skb
);
1166 element
= rxq
->rx_used
.next
;
1167 rxb
= list_entry(element
, struct iwl_rx_mem_buffer
, list
);
1169 spin_unlock_irqrestore(&rxq
->lock
, flags
);
1173 /* If radiotap head is required, reserve some headroom here.
1174 * The physical head count is a variable rx_stats->phy_count.
1175 * We reserve 4 bytes here. Plus these extra bytes, the
1176 * headroom of the physical head should be enough for the
1177 * radiotap head that iwl3945 supported. See iwl3945_rt.
1179 skb_reserve(rxb
->skb
, 4);
1181 /* Get physical address of RB/SKB */
1182 rxb
->real_dma_addr
= pci_map_single(priv
->pci_dev
,
1184 priv
->hw_params
.rx_buf_size
,
1185 PCI_DMA_FROMDEVICE
);
1187 spin_lock_irqsave(&rxq
->lock
, flags
);
1188 list_add_tail(&rxb
->list
, &rxq
->rx_free
);
1189 priv
->alloc_rxb_skb
++;
1191 spin_unlock_irqrestore(&rxq
->lock
, flags
);
1195 void iwl3945_rx_queue_reset(struct iwl_priv
*priv
, struct iwl_rx_queue
*rxq
)
1197 unsigned long flags
;
1199 spin_lock_irqsave(&rxq
->lock
, flags
);
1200 INIT_LIST_HEAD(&rxq
->rx_free
);
1201 INIT_LIST_HEAD(&rxq
->rx_used
);
1202 /* Fill the rx_used queue with _all_ of the Rx buffers */
1203 for (i
= 0; i
< RX_FREE_BUFFERS
+ RX_QUEUE_SIZE
; i
++) {
1204 /* In the reset function, these buffers may have been allocated
1205 * to an SKB, so we need to unmap and free potential storage */
1206 if (rxq
->pool
[i
].skb
!= NULL
) {
1207 pci_unmap_single(priv
->pci_dev
,
1208 rxq
->pool
[i
].real_dma_addr
,
1209 priv
->hw_params
.rx_buf_size
,
1210 PCI_DMA_FROMDEVICE
);
1211 priv
->alloc_rxb_skb
--;
1212 dev_kfree_skb(rxq
->pool
[i
].skb
);
1213 rxq
->pool
[i
].skb
= NULL
;
1215 list_add_tail(&rxq
->pool
[i
].list
, &rxq
->rx_used
);
1218 /* Set us so that we have processed and used all buffers, but have
1219 * not restocked the Rx queue with fresh buffers */
1220 rxq
->read
= rxq
->write
= 0;
1221 rxq
->free_count
= 0;
1222 rxq
->write_actual
= 0;
1223 spin_unlock_irqrestore(&rxq
->lock
, flags
);
1226 void iwl3945_rx_replenish(void *data
)
1228 struct iwl_priv
*priv
= data
;
1229 unsigned long flags
;
1231 iwl3945_rx_allocate(priv
, GFP_KERNEL
);
1233 spin_lock_irqsave(&priv
->lock
, flags
);
1234 iwl3945_rx_queue_restock(priv
);
1235 spin_unlock_irqrestore(&priv
->lock
, flags
);
1238 static void iwl3945_rx_replenish_now(struct iwl_priv
*priv
)
1240 iwl3945_rx_allocate(priv
, GFP_ATOMIC
);
1242 iwl3945_rx_queue_restock(priv
);
1246 /* Assumes that the skb field of the buffers in 'pool' is kept accurate.
1247 * If an SKB has been detached, the POOL needs to have its SKB set to NULL
1248 * This free routine walks the list of POOL entries and if SKB is set to
1249 * non NULL it is unmapped and freed
1251 static void iwl3945_rx_queue_free(struct iwl_priv
*priv
, struct iwl_rx_queue
*rxq
)
1254 for (i
= 0; i
< RX_QUEUE_SIZE
+ RX_FREE_BUFFERS
; i
++) {
1255 if (rxq
->pool
[i
].skb
!= NULL
) {
1256 pci_unmap_single(priv
->pci_dev
,
1257 rxq
->pool
[i
].real_dma_addr
,
1258 priv
->hw_params
.rx_buf_size
,
1259 PCI_DMA_FROMDEVICE
);
1260 dev_kfree_skb(rxq
->pool
[i
].skb
);
1264 pci_free_consistent(priv
->pci_dev
, 4 * RX_QUEUE_SIZE
, rxq
->bd
,
1266 pci_free_consistent(priv
->pci_dev
, sizeof(struct iwl_rb_status
),
1267 rxq
->rb_stts
, rxq
->rb_stts_dma
);
1269 rxq
->rb_stts
= NULL
;
1273 /* Convert linear signal-to-noise ratio into dB */
1274 static u8 ratio2dB
[100] = {
1275 /* 0 1 2 3 4 5 6 7 8 9 */
1276 0, 0, 6, 10, 12, 14, 16, 17, 18, 19, /* 00 - 09 */
1277 20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */
1278 26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */
1279 29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */
1280 32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */
1281 34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */
1282 36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */
1283 37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */
1284 38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */
1285 39, 39, 39, 39, 39, 40, 40, 40, 40, 40 /* 90 - 99 */
1288 /* Calculates a relative dB value from a ratio of linear
1289 * (i.e. not dB) signal levels.
1290 * Conversion assumes that levels are voltages (20*log), not powers (10*log). */
1291 int iwl3945_calc_db_from_ratio(int sig_ratio
)
1293 /* 1000:1 or higher just report as 60 dB */
1294 if (sig_ratio
>= 1000)
1297 /* 100:1 or higher, divide by 10 and use table,
1298 * add 20 dB to make up for divide by 10 */
1299 if (sig_ratio
>= 100)
1300 return 20 + (int)ratio2dB
[sig_ratio
/10];
1302 /* We shouldn't see this */
1306 /* Use table for ratios 1:1 - 99:1 */
1307 return (int)ratio2dB
[sig_ratio
];
1310 #define PERFECT_RSSI (-20) /* dBm */
1311 #define WORST_RSSI (-95) /* dBm */
1312 #define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI)
1314 /* Calculate an indication of rx signal quality (a percentage, not dBm!).
1315 * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info
1316 * about formulas used below. */
1317 int iwl3945_calc_sig_qual(int rssi_dbm
, int noise_dbm
)
1320 int degradation
= PERFECT_RSSI
- rssi_dbm
;
1322 /* If we get a noise measurement, use signal-to-noise ratio (SNR)
1323 * as indicator; formula is (signal dbm - noise dbm).
1324 * SNR at or above 40 is a great signal (100%).
1325 * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator.
1326 * Weakest usable signal is usually 10 - 15 dB SNR. */
1328 if (rssi_dbm
- noise_dbm
>= 40)
1330 else if (rssi_dbm
< noise_dbm
)
1332 sig_qual
= ((rssi_dbm
- noise_dbm
) * 5) / 2;
1334 /* Else use just the signal level.
1335 * This formula is a least squares fit of data points collected and
1336 * compared with a reference system that had a percentage (%) display
1337 * for signal quality. */
1339 sig_qual
= (100 * (RSSI_RANGE
* RSSI_RANGE
) - degradation
*
1340 (15 * RSSI_RANGE
+ 62 * degradation
)) /
1341 (RSSI_RANGE
* RSSI_RANGE
);
1345 else if (sig_qual
< 1)
1352 * iwl3945_rx_handle - Main entry function for receiving responses from uCode
1354 * Uses the priv->rx_handlers callback function array to invoke
1355 * the appropriate handlers, including command responses,
1356 * frame-received notifications, and other notifications.
1358 static void iwl3945_rx_handle(struct iwl_priv
*priv
)
1360 struct iwl_rx_mem_buffer
*rxb
;
1361 struct iwl_rx_packet
*pkt
;
1362 struct iwl_rx_queue
*rxq
= &priv
->rxq
;
1365 unsigned long flags
;
1368 int total_empty
= 0;
1370 /* uCode's read index (stored in shared DRAM) indicates the last Rx
1371 * buffer that the driver may process (last buffer filled by ucode). */
1372 r
= le16_to_cpu(rxq
->rb_stts
->closed_rb_num
) & 0x0FFF;
1375 /* calculate total frames need to be restock after handling RX */
1376 total_empty
= r
- priv
->rxq
.write_actual
;
1377 if (total_empty
< 0)
1378 total_empty
+= RX_QUEUE_SIZE
;
1380 if (total_empty
> (RX_QUEUE_SIZE
/ 2))
1382 /* Rx interrupt, but nothing sent from uCode */
1384 IWL_DEBUG_RX(priv
, "r = %d, i = %d\n", r
, i
);
1387 rxb
= rxq
->queue
[i
];
1389 /* If an RXB doesn't have a Rx queue slot associated with it,
1390 * then a bug has been introduced in the queue refilling
1391 * routines -- catch it here */
1392 BUG_ON(rxb
== NULL
);
1394 rxq
->queue
[i
] = NULL
;
1396 pci_unmap_single(priv
->pci_dev
, rxb
->real_dma_addr
,
1397 priv
->hw_params
.rx_buf_size
,
1398 PCI_DMA_FROMDEVICE
);
1399 pkt
= (struct iwl_rx_packet
*)rxb
->skb
->data
;
1401 /* Reclaim a command buffer only if this packet is a response
1402 * to a (driver-originated) command.
1403 * If the packet (e.g. Rx frame) originated from uCode,
1404 * there is no command buffer to reclaim.
1405 * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
1406 * but apparently a few don't get set; catch them here. */
1407 reclaim
= !(pkt
->hdr
.sequence
& SEQ_RX_FRAME
) &&
1408 (pkt
->hdr
.cmd
!= STATISTICS_NOTIFICATION
) &&
1409 (pkt
->hdr
.cmd
!= REPLY_TX
);
1411 /* Based on type of command response or notification,
1412 * handle those that need handling via function in
1413 * rx_handlers table. See iwl3945_setup_rx_handlers() */
1414 if (priv
->rx_handlers
[pkt
->hdr
.cmd
]) {
1415 IWL_DEBUG_RX(priv
, "r = %d, i = %d, %s, 0x%02x\n", r
, i
,
1416 get_cmd_string(pkt
->hdr
.cmd
), pkt
->hdr
.cmd
);
1417 priv
->rx_handlers
[pkt
->hdr
.cmd
] (priv
, rxb
);
1418 priv
->isr_stats
.rx_handlers
[pkt
->hdr
.cmd
]++;
1420 /* No handling needed */
1421 IWL_DEBUG_RX(priv
, "r %d i %d No handler needed for %s, 0x%02x\n",
1422 r
, i
, get_cmd_string(pkt
->hdr
.cmd
),
1427 /* Invoke any callbacks, transfer the skb to caller, and
1428 * fire off the (possibly) blocking iwl_send_cmd()
1429 * as we reclaim the driver command queue */
1430 if (rxb
&& rxb
->skb
)
1431 iwl_tx_cmd_complete(priv
, rxb
);
1433 IWL_WARN(priv
, "Claim null rxb?\n");
1436 /* For now we just don't re-use anything. We can tweak this
1437 * later to try and re-use notification packets and SKBs that
1438 * fail to Rx correctly */
1439 if (rxb
->skb
!= NULL
) {
1440 priv
->alloc_rxb_skb
--;
1441 dev_kfree_skb_any(rxb
->skb
);
1445 spin_lock_irqsave(&rxq
->lock
, flags
);
1446 list_add_tail(&rxb
->list
, &priv
->rxq
.rx_used
);
1447 spin_unlock_irqrestore(&rxq
->lock
, flags
);
1448 i
= (i
+ 1) & RX_QUEUE_MASK
;
1449 /* If there are a lot of unused frames,
1450 * restock the Rx queue so ucode won't assert. */
1455 iwl3945_rx_replenish_now(priv
);
1461 /* Backtrack one entry */
1464 iwl3945_rx_replenish_now(priv
);
1466 iwl3945_rx_queue_restock(priv
);
1469 /* call this function to flush any scheduled tasklet */
1470 static inline void iwl_synchronize_irq(struct iwl_priv
*priv
)
1472 /* wait to make sure we flush pending tasklet*/
1473 synchronize_irq(priv
->pci_dev
->irq
);
1474 tasklet_kill(&priv
->irq_tasklet
);
1477 static const char *desc_lookup(int i
)
1485 return "BAD_CHECKSUM";
1487 return "NMI_INTERRUPT";
1491 return "FATAL_ERROR";
1497 #define ERROR_START_OFFSET (1 * sizeof(u32))
1498 #define ERROR_ELEM_SIZE (7 * sizeof(u32))
1500 static void iwl3945_dump_nic_error_log(struct iwl_priv
*priv
)
1503 u32 desc
, time
, count
, base
, data1
;
1504 u32 blink1
, blink2
, ilink1
, ilink2
;
1506 base
= le32_to_cpu(priv
->card_alive
.error_event_table_ptr
);
1508 if (!iwl3945_hw_valid_rtc_data_addr(base
)) {
1509 IWL_ERR(priv
, "Not valid error log pointer 0x%08X\n", base
);
1514 count
= iwl_read_targ_mem(priv
, base
);
1516 if (ERROR_START_OFFSET
<= count
* ERROR_ELEM_SIZE
) {
1517 IWL_ERR(priv
, "Start IWL Error Log Dump:\n");
1518 IWL_ERR(priv
, "Status: 0x%08lX, count: %d\n",
1519 priv
->status
, count
);
1522 IWL_ERR(priv
, "Desc Time asrtPC blink2 "
1523 "ilink1 nmiPC Line\n");
1524 for (i
= ERROR_START_OFFSET
;
1525 i
< (count
* ERROR_ELEM_SIZE
) + ERROR_START_OFFSET
;
1526 i
+= ERROR_ELEM_SIZE
) {
1527 desc
= iwl_read_targ_mem(priv
, base
+ i
);
1529 iwl_read_targ_mem(priv
, base
+ i
+ 1 * sizeof(u32
));
1531 iwl_read_targ_mem(priv
, base
+ i
+ 2 * sizeof(u32
));
1533 iwl_read_targ_mem(priv
, base
+ i
+ 3 * sizeof(u32
));
1535 iwl_read_targ_mem(priv
, base
+ i
+ 4 * sizeof(u32
));
1537 iwl_read_targ_mem(priv
, base
+ i
+ 5 * sizeof(u32
));
1539 iwl_read_targ_mem(priv
, base
+ i
+ 6 * sizeof(u32
));
1542 "%-13s (#%d) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n",
1543 desc_lookup(desc
), desc
, time
, blink1
, blink2
,
1544 ilink1
, ilink2
, data1
);
1549 #define EVENT_START_OFFSET (6 * sizeof(u32))
1552 * iwl3945_print_event_log - Dump error event log to syslog
1555 static void iwl3945_print_event_log(struct iwl_priv
*priv
, u32 start_idx
,
1556 u32 num_events
, u32 mode
)
1559 u32 base
; /* SRAM byte address of event log header */
1560 u32 event_size
; /* 2 u32s, or 3 u32s if timestamp recorded */
1561 u32 ptr
; /* SRAM byte address of log data */
1562 u32 ev
, time
, data
; /* event log data */
1564 if (num_events
== 0)
1567 base
= le32_to_cpu(priv
->card_alive
.log_event_table_ptr
);
1570 event_size
= 2 * sizeof(u32
);
1572 event_size
= 3 * sizeof(u32
);
1574 ptr
= base
+ EVENT_START_OFFSET
+ (start_idx
* event_size
);
1576 /* "time" is actually "data" for mode 0 (no timestamp).
1577 * place event id # at far right for easier visual parsing. */
1578 for (i
= 0; i
< num_events
; i
++) {
1579 ev
= iwl_read_targ_mem(priv
, ptr
);
1581 time
= iwl_read_targ_mem(priv
, ptr
);
1585 IWL_ERR(priv
, "0x%08x\t%04u\n", time
, ev
);
1587 data
= iwl_read_targ_mem(priv
, ptr
);
1589 IWL_ERR(priv
, "%010u\t0x%08x\t%04u\n", time
, data
, ev
);
1594 static void iwl3945_dump_nic_event_log(struct iwl_priv
*priv
)
1596 u32 base
; /* SRAM byte address of event log header */
1597 u32 capacity
; /* event log capacity in # entries */
1598 u32 mode
; /* 0 - no timestamp, 1 - timestamp recorded */
1599 u32 num_wraps
; /* # times uCode wrapped to top of log */
1600 u32 next_entry
; /* index of next entry to be written by uCode */
1601 u32 size
; /* # entries that we'll print */
1603 base
= le32_to_cpu(priv
->card_alive
.log_event_table_ptr
);
1604 if (!iwl3945_hw_valid_rtc_data_addr(base
)) {
1605 IWL_ERR(priv
, "Invalid event log pointer 0x%08X\n", base
);
1609 /* event log header */
1610 capacity
= iwl_read_targ_mem(priv
, base
);
1611 mode
= iwl_read_targ_mem(priv
, base
+ (1 * sizeof(u32
)));
1612 num_wraps
= iwl_read_targ_mem(priv
, base
+ (2 * sizeof(u32
)));
1613 next_entry
= iwl_read_targ_mem(priv
, base
+ (3 * sizeof(u32
)));
1615 size
= num_wraps
? capacity
: next_entry
;
1617 /* bail out if nothing in log */
1619 IWL_ERR(priv
, "Start IWL Event Log Dump: nothing in log\n");
1623 IWL_ERR(priv
, "Start IWL Event Log Dump: display count %d, wraps %d\n",
1626 /* if uCode has wrapped back to top of log, start at the oldest entry,
1627 * i.e the next one that uCode would fill. */
1629 iwl3945_print_event_log(priv
, next_entry
,
1630 capacity
- next_entry
, mode
);
1632 /* (then/else) start at top of log */
1633 iwl3945_print_event_log(priv
, 0, next_entry
, mode
);
1637 static void iwl3945_irq_tasklet(struct iwl_priv
*priv
)
1639 u32 inta
, handled
= 0;
1641 unsigned long flags
;
1642 #ifdef CONFIG_IWLWIFI_DEBUG
1646 spin_lock_irqsave(&priv
->lock
, flags
);
1648 /* Ack/clear/reset pending uCode interrupts.
1649 * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
1650 * and will clear only when CSR_FH_INT_STATUS gets cleared. */
1651 inta
= iwl_read32(priv
, CSR_INT
);
1652 iwl_write32(priv
, CSR_INT
, inta
);
1654 /* Ack/clear/reset pending flow-handler (DMA) interrupts.
1655 * Any new interrupts that happen after this, either while we're
1656 * in this tasklet, or later, will show up in next ISR/tasklet. */
1657 inta_fh
= iwl_read32(priv
, CSR_FH_INT_STATUS
);
1658 iwl_write32(priv
, CSR_FH_INT_STATUS
, inta_fh
);
1660 #ifdef CONFIG_IWLWIFI_DEBUG
1661 if (iwl_get_debug_level(priv
) & IWL_DL_ISR
) {
1662 /* just for debug */
1663 inta_mask
= iwl_read32(priv
, CSR_INT_MASK
);
1664 IWL_DEBUG_ISR(priv
, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
1665 inta
, inta_mask
, inta_fh
);
1669 /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
1670 * atomic, make sure that inta covers all the interrupts that
1671 * we've discovered, even if FH interrupt came in just after
1672 * reading CSR_INT. */
1673 if (inta_fh
& CSR39_FH_INT_RX_MASK
)
1674 inta
|= CSR_INT_BIT_FH_RX
;
1675 if (inta_fh
& CSR39_FH_INT_TX_MASK
)
1676 inta
|= CSR_INT_BIT_FH_TX
;
1678 /* Now service all interrupt bits discovered above. */
1679 if (inta
& CSR_INT_BIT_HW_ERR
) {
1680 IWL_ERR(priv
, "Hardware error detected. Restarting.\n");
1682 /* Tell the device to stop sending interrupts */
1683 iwl_disable_interrupts(priv
);
1685 priv
->isr_stats
.hw
++;
1686 iwl_irq_handle_error(priv
);
1688 handled
|= CSR_INT_BIT_HW_ERR
;
1690 spin_unlock_irqrestore(&priv
->lock
, flags
);
1695 #ifdef CONFIG_IWLWIFI_DEBUG
1696 if (iwl_get_debug_level(priv
) & (IWL_DL_ISR
)) {
1697 /* NIC fires this, but we don't use it, redundant with WAKEUP */
1698 if (inta
& CSR_INT_BIT_SCD
) {
1699 IWL_DEBUG_ISR(priv
, "Scheduler finished to transmit "
1700 "the frame/frames.\n");
1701 priv
->isr_stats
.sch
++;
1704 /* Alive notification via Rx interrupt will do the real work */
1705 if (inta
& CSR_INT_BIT_ALIVE
) {
1706 IWL_DEBUG_ISR(priv
, "Alive interrupt\n");
1707 priv
->isr_stats
.alive
++;
1711 /* Safely ignore these bits for debug checks below */
1712 inta
&= ~(CSR_INT_BIT_SCD
| CSR_INT_BIT_ALIVE
);
1714 /* Error detected by uCode */
1715 if (inta
& CSR_INT_BIT_SW_ERR
) {
1716 IWL_ERR(priv
, "Microcode SW error detected. "
1717 "Restarting 0x%X.\n", inta
);
1718 priv
->isr_stats
.sw
++;
1719 priv
->isr_stats
.sw_err
= inta
;
1720 iwl_irq_handle_error(priv
);
1721 handled
|= CSR_INT_BIT_SW_ERR
;
1724 /* uCode wakes up after power-down sleep */
1725 if (inta
& CSR_INT_BIT_WAKEUP
) {
1726 IWL_DEBUG_ISR(priv
, "Wakeup interrupt\n");
1727 iwl_rx_queue_update_write_ptr(priv
, &priv
->rxq
);
1728 iwl_txq_update_write_ptr(priv
, &priv
->txq
[0]);
1729 iwl_txq_update_write_ptr(priv
, &priv
->txq
[1]);
1730 iwl_txq_update_write_ptr(priv
, &priv
->txq
[2]);
1731 iwl_txq_update_write_ptr(priv
, &priv
->txq
[3]);
1732 iwl_txq_update_write_ptr(priv
, &priv
->txq
[4]);
1733 iwl_txq_update_write_ptr(priv
, &priv
->txq
[5]);
1735 priv
->isr_stats
.wakeup
++;
1736 handled
|= CSR_INT_BIT_WAKEUP
;
1739 /* All uCode command responses, including Tx command responses,
1740 * Rx "responses" (frame-received notification), and other
1741 * notifications from uCode come through here*/
1742 if (inta
& (CSR_INT_BIT_FH_RX
| CSR_INT_BIT_SW_RX
)) {
1743 iwl3945_rx_handle(priv
);
1744 priv
->isr_stats
.rx
++;
1745 handled
|= (CSR_INT_BIT_FH_RX
| CSR_INT_BIT_SW_RX
);
1748 if (inta
& CSR_INT_BIT_FH_TX
) {
1749 IWL_DEBUG_ISR(priv
, "Tx interrupt\n");
1750 priv
->isr_stats
.tx
++;
1752 iwl_write32(priv
, CSR_FH_INT_STATUS
, (1 << 6));
1753 iwl_write_direct32(priv
, FH39_TCSR_CREDIT
1754 (FH39_SRVC_CHNL
), 0x0);
1755 handled
|= CSR_INT_BIT_FH_TX
;
1758 if (inta
& ~handled
) {
1759 IWL_ERR(priv
, "Unhandled INTA bits 0x%08x\n", inta
& ~handled
);
1760 priv
->isr_stats
.unhandled
++;
1763 if (inta
& ~priv
->inta_mask
) {
1764 IWL_WARN(priv
, "Disabled INTA bits 0x%08x were pending\n",
1765 inta
& ~priv
->inta_mask
);
1766 IWL_WARN(priv
, " with FH_INT = 0x%08x\n", inta_fh
);
1769 /* Re-enable all interrupts */
1770 /* only Re-enable if disabled by irq */
1771 if (test_bit(STATUS_INT_ENABLED
, &priv
->status
))
1772 iwl_enable_interrupts(priv
);
1774 #ifdef CONFIG_IWLWIFI_DEBUG
1775 if (iwl_get_debug_level(priv
) & (IWL_DL_ISR
)) {
1776 inta
= iwl_read32(priv
, CSR_INT
);
1777 inta_mask
= iwl_read32(priv
, CSR_INT_MASK
);
1778 inta_fh
= iwl_read32(priv
, CSR_FH_INT_STATUS
);
1779 IWL_DEBUG_ISR(priv
, "End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
1780 "flags 0x%08lx\n", inta
, inta_mask
, inta_fh
, flags
);
1783 spin_unlock_irqrestore(&priv
->lock
, flags
);
1786 static int iwl3945_get_channels_for_scan(struct iwl_priv
*priv
,
1787 enum ieee80211_band band
,
1788 u8 is_active
, u8 n_probes
,
1789 struct iwl3945_scan_channel
*scan_ch
)
1791 struct ieee80211_channel
*chan
;
1792 const struct ieee80211_supported_band
*sband
;
1793 const struct iwl_channel_info
*ch_info
;
1794 u16 passive_dwell
= 0;
1795 u16 active_dwell
= 0;
1798 sband
= iwl_get_hw_mode(priv
, band
);
1802 active_dwell
= iwl_get_active_dwell_time(priv
, band
, n_probes
);
1803 passive_dwell
= iwl_get_passive_dwell_time(priv
, band
);
1805 if (passive_dwell
<= active_dwell
)
1806 passive_dwell
= active_dwell
+ 1;
1808 for (i
= 0, added
= 0; i
< priv
->scan_request
->n_channels
; i
++) {
1809 chan
= priv
->scan_request
->channels
[i
];
1811 if (chan
->band
!= band
)
1814 scan_ch
->channel
= chan
->hw_value
;
1816 ch_info
= iwl_get_channel_info(priv
, band
, scan_ch
->channel
);
1817 if (!is_channel_valid(ch_info
)) {
1818 IWL_DEBUG_SCAN(priv
, "Channel %d is INVALID for this band.\n",
1823 scan_ch
->active_dwell
= cpu_to_le16(active_dwell
);
1824 scan_ch
->passive_dwell
= cpu_to_le16(passive_dwell
);
1825 /* If passive , set up for auto-switch
1826 * and use long active_dwell time.
1828 if (!is_active
|| is_channel_passive(ch_info
) ||
1829 (chan
->flags
& IEEE80211_CHAN_PASSIVE_SCAN
)) {
1830 scan_ch
->type
= 0; /* passive */
1831 if (IWL_UCODE_API(priv
->ucode_ver
) == 1)
1832 scan_ch
->active_dwell
= cpu_to_le16(passive_dwell
- 1);
1834 scan_ch
->type
= 1; /* active */
1837 /* Set direct probe bits. These may be used both for active
1838 * scan channels (probes gets sent right away),
1839 * or for passive channels (probes get se sent only after
1840 * hearing clear Rx packet).*/
1841 if (IWL_UCODE_API(priv
->ucode_ver
) >= 2) {
1843 scan_ch
->type
|= IWL39_SCAN_PROBE_MASK(n_probes
);
1845 /* uCode v1 does not allow setting direct probe bits on
1846 * passive channel. */
1847 if ((scan_ch
->type
& 1) && n_probes
)
1848 scan_ch
->type
|= IWL39_SCAN_PROBE_MASK(n_probes
);
1851 /* Set txpower levels to defaults */
1852 scan_ch
->tpc
.dsp_atten
= 110;
1853 /* scan_pwr_info->tpc.dsp_atten; */
1855 /*scan_pwr_info->tpc.tx_gain; */
1856 if (band
== IEEE80211_BAND_5GHZ
)
1857 scan_ch
->tpc
.tx_gain
= ((1 << 5) | (3 << 3)) | 3;
1859 scan_ch
->tpc
.tx_gain
= ((1 << 5) | (5 << 3));
1860 /* NOTE: if we were doing 6Mb OFDM for scans we'd use
1862 * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3;
1866 IWL_DEBUG_SCAN(priv
, "Scanning %d [%s %d]\n",
1868 (scan_ch
->type
& 1) ? "ACTIVE" : "PASSIVE",
1869 (scan_ch
->type
& 1) ?
1870 active_dwell
: passive_dwell
);
1876 IWL_DEBUG_SCAN(priv
, "total channels to scan %d \n", added
);
1880 static void iwl3945_init_hw_rates(struct iwl_priv
*priv
,
1881 struct ieee80211_rate
*rates
)
1885 for (i
= 0; i
< IWL_RATE_COUNT
; i
++) {
1886 rates
[i
].bitrate
= iwl3945_rates
[i
].ieee
* 5;
1887 rates
[i
].hw_value
= i
; /* Rate scaling will work on indexes */
1888 rates
[i
].hw_value_short
= i
;
1890 if ((i
> IWL39_LAST_OFDM_RATE
) || (i
< IWL_FIRST_OFDM_RATE
)) {
1892 * If CCK != 1M then set short preamble rate flag.
1894 rates
[i
].flags
|= (iwl3945_rates
[i
].plcp
== 10) ?
1895 0 : IEEE80211_RATE_SHORT_PREAMBLE
;
1900 /******************************************************************************
1902 * uCode download functions
1904 ******************************************************************************/
1906 static void iwl3945_dealloc_ucode_pci(struct iwl_priv
*priv
)
1908 iwl_free_fw_desc(priv
->pci_dev
, &priv
->ucode_code
);
1909 iwl_free_fw_desc(priv
->pci_dev
, &priv
->ucode_data
);
1910 iwl_free_fw_desc(priv
->pci_dev
, &priv
->ucode_data_backup
);
1911 iwl_free_fw_desc(priv
->pci_dev
, &priv
->ucode_init
);
1912 iwl_free_fw_desc(priv
->pci_dev
, &priv
->ucode_init_data
);
1913 iwl_free_fw_desc(priv
->pci_dev
, &priv
->ucode_boot
);
1917 * iwl3945_verify_inst_full - verify runtime uCode image in card vs. host,
1918 * looking at all data.
1920 static int iwl3945_verify_inst_full(struct iwl_priv
*priv
, __le32
*image
, u32 len
)
1927 IWL_DEBUG_INFO(priv
, "ucode inst image size is %u\n", len
);
1929 iwl_write_direct32(priv
, HBUS_TARG_MEM_RADDR
,
1930 IWL39_RTC_INST_LOWER_BOUND
);
1933 for (; len
> 0; len
-= sizeof(u32
), image
++) {
1934 /* read data comes through single port, auto-incr addr */
1935 /* NOTE: Use the debugless read so we don't flood kernel log
1936 * if IWL_DL_IO is set */
1937 val
= _iwl_read_direct32(priv
, HBUS_TARG_MEM_RDAT
);
1938 if (val
!= le32_to_cpu(*image
)) {
1939 IWL_ERR(priv
, "uCode INST section is invalid at "
1940 "offset 0x%x, is 0x%x, s/b 0x%x\n",
1941 save_len
- len
, val
, le32_to_cpu(*image
));
1951 IWL_DEBUG_INFO(priv
,
1952 "ucode image in INSTRUCTION memory is good\n");
1959 * iwl3945_verify_inst_sparse - verify runtime uCode image in card vs. host,
1960 * using sample data 100 bytes apart. If these sample points are good,
1961 * it's a pretty good bet that everything between them is good, too.
1963 static int iwl3945_verify_inst_sparse(struct iwl_priv
*priv
, __le32
*image
, u32 len
)
1970 IWL_DEBUG_INFO(priv
, "ucode inst image size is %u\n", len
);
1972 for (i
= 0; i
< len
; i
+= 100, image
+= 100/sizeof(u32
)) {
1973 /* read data comes through single port, auto-incr addr */
1974 /* NOTE: Use the debugless read so we don't flood kernel log
1975 * if IWL_DL_IO is set */
1976 iwl_write_direct32(priv
, HBUS_TARG_MEM_RADDR
,
1977 i
+ IWL39_RTC_INST_LOWER_BOUND
);
1978 val
= _iwl_read_direct32(priv
, HBUS_TARG_MEM_RDAT
);
1979 if (val
!= le32_to_cpu(*image
)) {
1980 #if 0 /* Enable this if you want to see details */
1981 IWL_ERR(priv
, "uCode INST section is invalid at "
1982 "offset 0x%x, is 0x%x, s/b 0x%x\n",
1997 * iwl3945_verify_ucode - determine which instruction image is in SRAM,
1998 * and verify its contents
2000 static int iwl3945_verify_ucode(struct iwl_priv
*priv
)
2007 image
= (__le32
*)priv
->ucode_boot
.v_addr
;
2008 len
= priv
->ucode_boot
.len
;
2009 rc
= iwl3945_verify_inst_sparse(priv
, image
, len
);
2011 IWL_DEBUG_INFO(priv
, "Bootstrap uCode is good in inst SRAM\n");
2015 /* Try initialize */
2016 image
= (__le32
*)priv
->ucode_init
.v_addr
;
2017 len
= priv
->ucode_init
.len
;
2018 rc
= iwl3945_verify_inst_sparse(priv
, image
, len
);
2020 IWL_DEBUG_INFO(priv
, "Initialize uCode is good in inst SRAM\n");
2024 /* Try runtime/protocol */
2025 image
= (__le32
*)priv
->ucode_code
.v_addr
;
2026 len
= priv
->ucode_code
.len
;
2027 rc
= iwl3945_verify_inst_sparse(priv
, image
, len
);
2029 IWL_DEBUG_INFO(priv
, "Runtime uCode is good in inst SRAM\n");
2033 IWL_ERR(priv
, "NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
2035 /* Since nothing seems to match, show first several data entries in
2036 * instruction SRAM, so maybe visual inspection will give a clue.
2037 * Selection of bootstrap image (vs. other images) is arbitrary. */
2038 image
= (__le32
*)priv
->ucode_boot
.v_addr
;
2039 len
= priv
->ucode_boot
.len
;
2040 rc
= iwl3945_verify_inst_full(priv
, image
, len
);
2045 static void iwl3945_nic_start(struct iwl_priv
*priv
)
2047 /* Remove all resets to allow NIC to operate */
2048 iwl_write32(priv
, CSR_RESET
, 0);
2052 * iwl3945_read_ucode - Read uCode images from disk file.
2054 * Copy into buffers for card to fetch via bus-mastering
2056 static int iwl3945_read_ucode(struct iwl_priv
*priv
)
2058 const struct iwl_ucode_header
*ucode
;
2059 int ret
= -EINVAL
, index
;
2060 const struct firmware
*ucode_raw
;
2061 /* firmware file name contains uCode/driver compatibility version */
2062 const char *name_pre
= priv
->cfg
->fw_name_pre
;
2063 const unsigned int api_max
= priv
->cfg
->ucode_api_max
;
2064 const unsigned int api_min
= priv
->cfg
->ucode_api_min
;
2068 u32 api_ver
, inst_size
, data_size
, init_size
, init_data_size
, boot_size
;
2070 /* Ask kernel firmware_class module to get the boot firmware off disk.
2071 * request_firmware() is synchronous, file is in memory on return. */
2072 for (index
= api_max
; index
>= api_min
; index
--) {
2073 sprintf(buf
, "%s%u%s", name_pre
, index
, ".ucode");
2074 ret
= request_firmware(&ucode_raw
, buf
, &priv
->pci_dev
->dev
);
2076 IWL_ERR(priv
, "%s firmware file req failed: %d\n",
2083 if (index
< api_max
)
2084 IWL_ERR(priv
, "Loaded firmware %s, "
2085 "which is deprecated. "
2086 " Please use API v%u instead.\n",
2088 IWL_DEBUG_INFO(priv
, "Got firmware '%s' file "
2089 "(%zd bytes) from disk\n",
2090 buf
, ucode_raw
->size
);
2098 /* Make sure that we got at least our header! */
2099 if (ucode_raw
->size
< priv
->cfg
->ops
->ucode
->get_header_size(1)) {
2100 IWL_ERR(priv
, "File size way too small!\n");
2105 /* Data from ucode file: header followed by uCode images */
2106 ucode
= (struct iwl_ucode_header
*)ucode_raw
->data
;
2108 priv
->ucode_ver
= le32_to_cpu(ucode
->ver
);
2109 api_ver
= IWL_UCODE_API(priv
->ucode_ver
);
2110 inst_size
= priv
->cfg
->ops
->ucode
->get_inst_size(ucode
, api_ver
);
2111 data_size
= priv
->cfg
->ops
->ucode
->get_data_size(ucode
, api_ver
);
2112 init_size
= priv
->cfg
->ops
->ucode
->get_init_size(ucode
, api_ver
);
2114 priv
->cfg
->ops
->ucode
->get_init_data_size(ucode
, api_ver
);
2115 boot_size
= priv
->cfg
->ops
->ucode
->get_boot_size(ucode
, api_ver
);
2116 src
= priv
->cfg
->ops
->ucode
->get_data(ucode
, api_ver
);
2118 /* api_ver should match the api version forming part of the
2119 * firmware filename ... but we don't check for that and only rely
2120 * on the API version read from firmware header from here on forward */
2122 if (api_ver
< api_min
|| api_ver
> api_max
) {
2123 IWL_ERR(priv
, "Driver unable to support your firmware API. "
2124 "Driver supports v%u, firmware is v%u.\n",
2126 priv
->ucode_ver
= 0;
2130 if (api_ver
!= api_max
)
2131 IWL_ERR(priv
, "Firmware has old API version. Expected %u, "
2132 "got %u. New firmware can be obtained "
2133 "from http://www.intellinuxwireless.org.\n",
2136 IWL_INFO(priv
, "loaded firmware version %u.%u.%u.%u\n",
2137 IWL_UCODE_MAJOR(priv
->ucode_ver
),
2138 IWL_UCODE_MINOR(priv
->ucode_ver
),
2139 IWL_UCODE_API(priv
->ucode_ver
),
2140 IWL_UCODE_SERIAL(priv
->ucode_ver
));
2142 IWL_DEBUG_INFO(priv
, "f/w package hdr ucode version raw = 0x%x\n",
2144 IWL_DEBUG_INFO(priv
, "f/w package hdr runtime inst size = %u\n",
2146 IWL_DEBUG_INFO(priv
, "f/w package hdr runtime data size = %u\n",
2148 IWL_DEBUG_INFO(priv
, "f/w package hdr init inst size = %u\n",
2150 IWL_DEBUG_INFO(priv
, "f/w package hdr init data size = %u\n",
2152 IWL_DEBUG_INFO(priv
, "f/w package hdr boot inst size = %u\n",
2156 /* Verify size of file vs. image size info in file's header */
2157 if (ucode_raw
->size
!= priv
->cfg
->ops
->ucode
->get_header_size(api_ver
) +
2158 inst_size
+ data_size
+ init_size
+
2159 init_data_size
+ boot_size
) {
2161 IWL_DEBUG_INFO(priv
,
2162 "uCode file size %zd does not match expected size\n",
2168 /* Verify that uCode images will fit in card's SRAM */
2169 if (inst_size
> IWL39_MAX_INST_SIZE
) {
2170 IWL_DEBUG_INFO(priv
, "uCode instr len %d too large to fit in\n",
2176 if (data_size
> IWL39_MAX_DATA_SIZE
) {
2177 IWL_DEBUG_INFO(priv
, "uCode data len %d too large to fit in\n",
2182 if (init_size
> IWL39_MAX_INST_SIZE
) {
2183 IWL_DEBUG_INFO(priv
,
2184 "uCode init instr len %d too large to fit in\n",
2189 if (init_data_size
> IWL39_MAX_DATA_SIZE
) {
2190 IWL_DEBUG_INFO(priv
,
2191 "uCode init data len %d too large to fit in\n",
2196 if (boot_size
> IWL39_MAX_BSM_SIZE
) {
2197 IWL_DEBUG_INFO(priv
,
2198 "uCode boot instr len %d too large to fit in\n",
2204 /* Allocate ucode buffers for card's bus-master loading ... */
2206 /* Runtime instructions and 2 copies of data:
2207 * 1) unmodified from disk
2208 * 2) backup cache for save/restore during power-downs */
2209 priv
->ucode_code
.len
= inst_size
;
2210 iwl_alloc_fw_desc(priv
->pci_dev
, &priv
->ucode_code
);
2212 priv
->ucode_data
.len
= data_size
;
2213 iwl_alloc_fw_desc(priv
->pci_dev
, &priv
->ucode_data
);
2215 priv
->ucode_data_backup
.len
= data_size
;
2216 iwl_alloc_fw_desc(priv
->pci_dev
, &priv
->ucode_data_backup
);
2218 if (!priv
->ucode_code
.v_addr
|| !priv
->ucode_data
.v_addr
||
2219 !priv
->ucode_data_backup
.v_addr
)
2222 /* Initialization instructions and data */
2223 if (init_size
&& init_data_size
) {
2224 priv
->ucode_init
.len
= init_size
;
2225 iwl_alloc_fw_desc(priv
->pci_dev
, &priv
->ucode_init
);
2227 priv
->ucode_init_data
.len
= init_data_size
;
2228 iwl_alloc_fw_desc(priv
->pci_dev
, &priv
->ucode_init_data
);
2230 if (!priv
->ucode_init
.v_addr
|| !priv
->ucode_init_data
.v_addr
)
2234 /* Bootstrap (instructions only, no data) */
2236 priv
->ucode_boot
.len
= boot_size
;
2237 iwl_alloc_fw_desc(priv
->pci_dev
, &priv
->ucode_boot
);
2239 if (!priv
->ucode_boot
.v_addr
)
2243 /* Copy images into buffers for card's bus-master reads ... */
2245 /* Runtime instructions (first block of data in file) */
2247 IWL_DEBUG_INFO(priv
,
2248 "Copying (but not loading) uCode instr len %zd\n", len
);
2249 memcpy(priv
->ucode_code
.v_addr
, src
, len
);
2252 IWL_DEBUG_INFO(priv
, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
2253 priv
->ucode_code
.v_addr
, (u32
)priv
->ucode_code
.p_addr
);
2255 /* Runtime data (2nd block)
2256 * NOTE: Copy into backup buffer will be done in iwl3945_up() */
2258 IWL_DEBUG_INFO(priv
,
2259 "Copying (but not loading) uCode data len %zd\n", len
);
2260 memcpy(priv
->ucode_data
.v_addr
, src
, len
);
2261 memcpy(priv
->ucode_data_backup
.v_addr
, src
, len
);
2264 /* Initialization instructions (3rd block) */
2267 IWL_DEBUG_INFO(priv
,
2268 "Copying (but not loading) init instr len %zd\n", len
);
2269 memcpy(priv
->ucode_init
.v_addr
, src
, len
);
2273 /* Initialization data (4th block) */
2274 if (init_data_size
) {
2275 len
= init_data_size
;
2276 IWL_DEBUG_INFO(priv
,
2277 "Copying (but not loading) init data len %zd\n", len
);
2278 memcpy(priv
->ucode_init_data
.v_addr
, src
, len
);
2282 /* Bootstrap instructions (5th block) */
2284 IWL_DEBUG_INFO(priv
,
2285 "Copying (but not loading) boot instr len %zd\n", len
);
2286 memcpy(priv
->ucode_boot
.v_addr
, src
, len
);
2288 /* We have our copies now, allow OS release its copies */
2289 release_firmware(ucode_raw
);
2293 IWL_ERR(priv
, "failed to allocate pci memory\n");
2295 iwl3945_dealloc_ucode_pci(priv
);
2298 release_firmware(ucode_raw
);
2306 * iwl3945_set_ucode_ptrs - Set uCode address location
2308 * Tell initialization uCode where to find runtime uCode.
2310 * BSM registers initially contain pointers to initialization uCode.
2311 * We need to replace them to load runtime uCode inst and data,
2312 * and to save runtime data when powering down.
2314 static int iwl3945_set_ucode_ptrs(struct iwl_priv
*priv
)
2319 /* bits 31:0 for 3945 */
2320 pinst
= priv
->ucode_code
.p_addr
;
2321 pdata
= priv
->ucode_data_backup
.p_addr
;
2323 /* Tell bootstrap uCode where to find image to load */
2324 iwl_write_prph(priv
, BSM_DRAM_INST_PTR_REG
, pinst
);
2325 iwl_write_prph(priv
, BSM_DRAM_DATA_PTR_REG
, pdata
);
2326 iwl_write_prph(priv
, BSM_DRAM_DATA_BYTECOUNT_REG
,
2327 priv
->ucode_data
.len
);
2329 /* Inst byte count must be last to set up, bit 31 signals uCode
2330 * that all new ptr/size info is in place */
2331 iwl_write_prph(priv
, BSM_DRAM_INST_BYTECOUNT_REG
,
2332 priv
->ucode_code
.len
| BSM_DRAM_INST_LOAD
);
2334 IWL_DEBUG_INFO(priv
, "Runtime uCode pointers are set.\n");
2340 * iwl3945_init_alive_start - Called after REPLY_ALIVE notification received
2342 * Called after REPLY_ALIVE notification received from "initialize" uCode.
2344 * Tell "initialize" uCode to go ahead and load the runtime uCode.
2346 static void iwl3945_init_alive_start(struct iwl_priv
*priv
)
2348 /* Check alive response for "valid" sign from uCode */
2349 if (priv
->card_alive_init
.is_valid
!= UCODE_VALID_OK
) {
2350 /* We had an error bringing up the hardware, so take it
2351 * all the way back down so we can try again */
2352 IWL_DEBUG_INFO(priv
, "Initialize Alive failed.\n");
2356 /* Bootstrap uCode has loaded initialize uCode ... verify inst image.
2357 * This is a paranoid check, because we would not have gotten the
2358 * "initialize" alive if code weren't properly loaded. */
2359 if (iwl3945_verify_ucode(priv
)) {
2360 /* Runtime instruction load was bad;
2361 * take it all the way back down so we can try again */
2362 IWL_DEBUG_INFO(priv
, "Bad \"initialize\" uCode load.\n");
2366 /* Send pointers to protocol/runtime uCode image ... init code will
2367 * load and launch runtime uCode, which will send us another "Alive"
2369 IWL_DEBUG_INFO(priv
, "Initialization Alive received.\n");
2370 if (iwl3945_set_ucode_ptrs(priv
)) {
2371 /* Runtime instruction load won't happen;
2372 * take it all the way back down so we can try again */
2373 IWL_DEBUG_INFO(priv
, "Couldn't set up uCode pointers.\n");
2379 queue_work(priv
->workqueue
, &priv
->restart
);
2383 * iwl3945_alive_start - called after REPLY_ALIVE notification received
2384 * from protocol/runtime uCode (initialization uCode's
2385 * Alive gets handled by iwl3945_init_alive_start()).
2387 static void iwl3945_alive_start(struct iwl_priv
*priv
)
2389 int thermal_spin
= 0;
2392 IWL_DEBUG_INFO(priv
, "Runtime Alive received.\n");
2394 if (priv
->card_alive
.is_valid
!= UCODE_VALID_OK
) {
2395 /* We had an error bringing up the hardware, so take it
2396 * all the way back down so we can try again */
2397 IWL_DEBUG_INFO(priv
, "Alive failed.\n");
2401 /* Initialize uCode has loaded Runtime uCode ... verify inst image.
2402 * This is a paranoid check, because we would not have gotten the
2403 * "runtime" alive if code weren't properly loaded. */
2404 if (iwl3945_verify_ucode(priv
)) {
2405 /* Runtime instruction load was bad;
2406 * take it all the way back down so we can try again */
2407 IWL_DEBUG_INFO(priv
, "Bad runtime uCode load.\n");
2411 iwl_clear_stations_table(priv
);
2413 rfkill
= iwl_read_prph(priv
, APMG_RFKILL_REG
);
2414 IWL_DEBUG_INFO(priv
, "RFKILL status: 0x%x\n", rfkill
);
2417 clear_bit(STATUS_RF_KILL_HW
, &priv
->status
);
2418 /* if RFKILL is not on, then wait for thermal
2419 * sensor in adapter to kick in */
2420 while (iwl3945_hw_get_temperature(priv
) == 0) {
2426 IWL_DEBUG_INFO(priv
, "Thermal calibration took %dus\n",
2429 set_bit(STATUS_RF_KILL_HW
, &priv
->status
);
2431 /* After the ALIVE response, we can send commands to 3945 uCode */
2432 set_bit(STATUS_ALIVE
, &priv
->status
);
2434 if (iwl_is_rfkill(priv
))
2437 ieee80211_wake_queues(priv
->hw
);
2439 priv
->active_rate
= priv
->rates_mask
;
2440 priv
->active_rate_basic
= priv
->rates_mask
& IWL_BASIC_RATES_MASK
;
2442 iwl_power_update_mode(priv
, false);
2444 if (iwl_is_associated(priv
)) {
2445 struct iwl3945_rxon_cmd
*active_rxon
=
2446 (struct iwl3945_rxon_cmd
*)(&priv
->active_rxon
);
2448 priv
->staging_rxon
.filter_flags
|= RXON_FILTER_ASSOC_MSK
;
2449 active_rxon
->filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
2451 /* Initialize our rx_config data */
2452 iwl_connection_init_rx_config(priv
, priv
->iw_mode
);
2455 /* Configure Bluetooth device coexistence support */
2456 iwl_send_bt_config(priv
);
2458 /* Configure the adapter for unassociated operation */
2459 iwlcore_commit_rxon(priv
);
2461 iwl3945_reg_txpower_periodic(priv
);
2463 iwl3945_led_register(priv
);
2465 IWL_DEBUG_INFO(priv
, "ALIVE processing complete.\n");
2466 set_bit(STATUS_READY
, &priv
->status
);
2467 wake_up_interruptible(&priv
->wait_command_queue
);
2469 /* reassociate for ADHOC mode */
2470 if (priv
->vif
&& (priv
->iw_mode
== NL80211_IFTYPE_ADHOC
)) {
2471 struct sk_buff
*beacon
= ieee80211_beacon_get(priv
->hw
,
2474 iwl_mac_beacon_update(priv
->hw
, beacon
);
2477 if (test_and_clear_bit(STATUS_MODE_PENDING
, &priv
->status
))
2478 iwl_set_mode(priv
, priv
->iw_mode
);
2483 queue_work(priv
->workqueue
, &priv
->restart
);
2486 static void iwl3945_cancel_deferred_work(struct iwl_priv
*priv
);
2488 static void __iwl3945_down(struct iwl_priv
*priv
)
2490 unsigned long flags
;
2491 int exit_pending
= test_bit(STATUS_EXIT_PENDING
, &priv
->status
);
2492 struct ieee80211_conf
*conf
= NULL
;
2494 IWL_DEBUG_INFO(priv
, DRV_NAME
" is going down\n");
2496 conf
= ieee80211_get_hw_conf(priv
->hw
);
2499 set_bit(STATUS_EXIT_PENDING
, &priv
->status
);
2501 iwl3945_led_unregister(priv
);
2502 iwl_clear_stations_table(priv
);
2504 /* Unblock any waiting calls */
2505 wake_up_interruptible_all(&priv
->wait_command_queue
);
2507 /* Wipe out the EXIT_PENDING status bit if we are not actually
2508 * exiting the module */
2510 clear_bit(STATUS_EXIT_PENDING
, &priv
->status
);
2512 /* stop and reset the on-board processor */
2513 iwl_write32(priv
, CSR_RESET
, CSR_RESET_REG_FLAG_NEVO_RESET
);
2515 /* tell the device to stop sending interrupts */
2516 spin_lock_irqsave(&priv
->lock
, flags
);
2517 iwl_disable_interrupts(priv
);
2518 spin_unlock_irqrestore(&priv
->lock
, flags
);
2519 iwl_synchronize_irq(priv
);
2521 if (priv
->mac80211_registered
)
2522 ieee80211_stop_queues(priv
->hw
);
2524 /* If we have not previously called iwl3945_init() then
2525 * clear all bits but the RF Kill bits and return */
2526 if (!iwl_is_init(priv
)) {
2527 priv
->status
= test_bit(STATUS_RF_KILL_HW
, &priv
->status
) <<
2529 test_bit(STATUS_GEO_CONFIGURED
, &priv
->status
) <<
2530 STATUS_GEO_CONFIGURED
|
2531 test_bit(STATUS_EXIT_PENDING
, &priv
->status
) <<
2532 STATUS_EXIT_PENDING
;
2536 /* ...otherwise clear out all the status bits but the RF Kill
2537 * bit and continue taking the NIC down. */
2538 priv
->status
&= test_bit(STATUS_RF_KILL_HW
, &priv
->status
) <<
2540 test_bit(STATUS_GEO_CONFIGURED
, &priv
->status
) <<
2541 STATUS_GEO_CONFIGURED
|
2542 test_bit(STATUS_FW_ERROR
, &priv
->status
) <<
2544 test_bit(STATUS_EXIT_PENDING
, &priv
->status
) <<
2545 STATUS_EXIT_PENDING
;
2547 priv
->cfg
->ops
->lib
->apm_ops
.reset(priv
);
2548 spin_lock_irqsave(&priv
->lock
, flags
);
2549 iwl_clear_bit(priv
, CSR_GP_CNTRL
, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ
);
2550 spin_unlock_irqrestore(&priv
->lock
, flags
);
2552 iwl3945_hw_txq_ctx_stop(priv
);
2553 iwl3945_hw_rxq_stop(priv
);
2555 iwl_write_prph(priv
, APMG_CLK_DIS_REG
,
2556 APMG_CLK_VAL_DMA_CLK_RQT
);
2561 priv
->cfg
->ops
->lib
->apm_ops
.stop(priv
);
2563 priv
->cfg
->ops
->lib
->apm_ops
.reset(priv
);
2566 memset(&priv
->card_alive
, 0, sizeof(struct iwl_alive_resp
));
2568 if (priv
->ibss_beacon
)
2569 dev_kfree_skb(priv
->ibss_beacon
);
2570 priv
->ibss_beacon
= NULL
;
2572 /* clear out any free frames */
2573 iwl3945_clear_free_frames(priv
);
2576 static void iwl3945_down(struct iwl_priv
*priv
)
2578 mutex_lock(&priv
->mutex
);
2579 __iwl3945_down(priv
);
2580 mutex_unlock(&priv
->mutex
);
2582 iwl3945_cancel_deferred_work(priv
);
2585 #define MAX_HW_RESTARTS 5
2587 static int __iwl3945_up(struct iwl_priv
*priv
)
2591 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
)) {
2592 IWL_WARN(priv
, "Exit pending; will not bring the NIC up\n");
2596 if (!priv
->ucode_data_backup
.v_addr
|| !priv
->ucode_data
.v_addr
) {
2597 IWL_ERR(priv
, "ucode not available for device bring up\n");
2601 /* If platform's RF_KILL switch is NOT set to KILL */
2602 if (iwl_read32(priv
, CSR_GP_CNTRL
) &
2603 CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW
)
2604 clear_bit(STATUS_RF_KILL_HW
, &priv
->status
);
2606 set_bit(STATUS_RF_KILL_HW
, &priv
->status
);
2607 IWL_WARN(priv
, "Radio disabled by HW RF Kill switch\n");
2611 iwl_write32(priv
, CSR_INT
, 0xFFFFFFFF);
2613 rc
= iwl3945_hw_nic_init(priv
);
2615 IWL_ERR(priv
, "Unable to int nic\n");
2619 /* make sure rfkill handshake bits are cleared */
2620 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
, CSR_UCODE_SW_BIT_RFKILL
);
2621 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
,
2622 CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED
);
2624 /* clear (again), then enable host interrupts */
2625 iwl_write32(priv
, CSR_INT
, 0xFFFFFFFF);
2626 iwl_enable_interrupts(priv
);
2628 /* really make sure rfkill handshake bits are cleared */
2629 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
, CSR_UCODE_SW_BIT_RFKILL
);
2630 iwl_write32(priv
, CSR_UCODE_DRV_GP1_CLR
, CSR_UCODE_SW_BIT_RFKILL
);
2632 /* Copy original ucode data image from disk into backup cache.
2633 * This will be used to initialize the on-board processor's
2634 * data SRAM for a clean start when the runtime program first loads. */
2635 memcpy(priv
->ucode_data_backup
.v_addr
, priv
->ucode_data
.v_addr
,
2636 priv
->ucode_data
.len
);
2638 /* We return success when we resume from suspend and rf_kill is on. */
2639 if (test_bit(STATUS_RF_KILL_HW
, &priv
->status
))
2642 for (i
= 0; i
< MAX_HW_RESTARTS
; i
++) {
2644 iwl_clear_stations_table(priv
);
2646 /* load bootstrap state machine,
2647 * load bootstrap program into processor's memory,
2648 * prepare to load the "initialize" uCode */
2649 priv
->cfg
->ops
->lib
->load_ucode(priv
);
2653 "Unable to set up bootstrap uCode: %d\n", rc
);
2657 /* start card; "initialize" will load runtime ucode */
2658 iwl3945_nic_start(priv
);
2660 IWL_DEBUG_INFO(priv
, DRV_NAME
" is coming up\n");
2665 set_bit(STATUS_EXIT_PENDING
, &priv
->status
);
2666 __iwl3945_down(priv
);
2667 clear_bit(STATUS_EXIT_PENDING
, &priv
->status
);
2669 /* tried to restart and config the device for as long as our
2670 * patience could withstand */
2671 IWL_ERR(priv
, "Unable to initialize device after %d attempts.\n", i
);
2676 /*****************************************************************************
2678 * Workqueue callbacks
2680 *****************************************************************************/
2682 static void iwl3945_bg_init_alive_start(struct work_struct
*data
)
2684 struct iwl_priv
*priv
=
2685 container_of(data
, struct iwl_priv
, init_alive_start
.work
);
2687 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
2690 mutex_lock(&priv
->mutex
);
2691 iwl3945_init_alive_start(priv
);
2692 mutex_unlock(&priv
->mutex
);
2695 static void iwl3945_bg_alive_start(struct work_struct
*data
)
2697 struct iwl_priv
*priv
=
2698 container_of(data
, struct iwl_priv
, alive_start
.work
);
2700 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
2703 mutex_lock(&priv
->mutex
);
2704 iwl3945_alive_start(priv
);
2705 mutex_unlock(&priv
->mutex
);
2708 static void iwl3945_rfkill_poll(struct work_struct
*data
)
2710 struct iwl_priv
*priv
=
2711 container_of(data
, struct iwl_priv
, rfkill_poll
.work
);
2713 if (iwl_read32(priv
, CSR_GP_CNTRL
) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW
)
2714 clear_bit(STATUS_RF_KILL_HW
, &priv
->status
);
2716 set_bit(STATUS_RF_KILL_HW
, &priv
->status
);
2718 wiphy_rfkill_set_hw_state(priv
->hw
->wiphy
,
2719 test_bit(STATUS_RF_KILL_HW
, &priv
->status
));
2721 queue_delayed_work(priv
->workqueue
, &priv
->rfkill_poll
,
2722 round_jiffies_relative(2 * HZ
));
2726 #define IWL_SCAN_CHECK_WATCHDOG (7 * HZ)
2727 static void iwl3945_bg_request_scan(struct work_struct
*data
)
2729 struct iwl_priv
*priv
=
2730 container_of(data
, struct iwl_priv
, request_scan
);
2731 struct iwl_host_cmd cmd
= {
2732 .id
= REPLY_SCAN_CMD
,
2733 .len
= sizeof(struct iwl3945_scan_cmd
),
2734 .flags
= CMD_SIZE_HUGE
,
2737 struct iwl3945_scan_cmd
*scan
;
2738 struct ieee80211_conf
*conf
= NULL
;
2740 enum ieee80211_band band
;
2741 bool is_active
= false;
2743 conf
= ieee80211_get_hw_conf(priv
->hw
);
2745 mutex_lock(&priv
->mutex
);
2747 cancel_delayed_work(&priv
->scan_check
);
2749 if (!iwl_is_ready(priv
)) {
2750 IWL_WARN(priv
, "request scan called when driver not ready.\n");
2754 /* Make sure the scan wasn't canceled before this queued work
2755 * was given the chance to run... */
2756 if (!test_bit(STATUS_SCANNING
, &priv
->status
))
2759 /* This should never be called or scheduled if there is currently
2760 * a scan active in the hardware. */
2761 if (test_bit(STATUS_SCAN_HW
, &priv
->status
)) {
2762 IWL_DEBUG_INFO(priv
, "Multiple concurrent scan requests "
2763 "Ignoring second request.\n");
2768 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
)) {
2769 IWL_DEBUG_SCAN(priv
, "Aborting scan due to device shutdown\n");
2773 if (test_bit(STATUS_SCAN_ABORTING
, &priv
->status
)) {
2775 "Scan request while abort pending. Queuing.\n");
2779 if (iwl_is_rfkill(priv
)) {
2780 IWL_DEBUG_HC(priv
, "Aborting scan due to RF Kill activation\n");
2784 if (!test_bit(STATUS_READY
, &priv
->status
)) {
2786 "Scan request while uninitialized. Queuing.\n");
2790 if (!priv
->scan_bands
) {
2791 IWL_DEBUG_HC(priv
, "Aborting scan due to no requested bands\n");
2796 priv
->scan
= kmalloc(sizeof(struct iwl3945_scan_cmd
) +
2797 IWL_MAX_SCAN_SIZE
, GFP_KERNEL
);
2804 memset(scan
, 0, sizeof(struct iwl3945_scan_cmd
) + IWL_MAX_SCAN_SIZE
);
2806 scan
->quiet_plcp_th
= IWL_PLCP_QUIET_THRESH
;
2807 scan
->quiet_time
= IWL_ACTIVE_QUIET_TIME
;
2809 if (iwl_is_associated(priv
)) {
2812 u32 suspend_time
= 100;
2813 u32 scan_suspend_time
= 100;
2814 unsigned long flags
;
2816 IWL_DEBUG_INFO(priv
, "Scanning while associated...\n");
2818 spin_lock_irqsave(&priv
->lock
, flags
);
2819 interval
= priv
->beacon_int
;
2820 spin_unlock_irqrestore(&priv
->lock
, flags
);
2822 scan
->suspend_time
= 0;
2823 scan
->max_out_time
= cpu_to_le32(200 * 1024);
2825 interval
= suspend_time
;
2827 * suspend time format:
2828 * 0-19: beacon interval in usec (time before exec.)
2830 * 24-31: number of beacons (suspend between channels)
2833 extra
= (suspend_time
/ interval
) << 24;
2834 scan_suspend_time
= 0xFF0FFFFF &
2835 (extra
| ((suspend_time
% interval
) * 1024));
2837 scan
->suspend_time
= cpu_to_le32(scan_suspend_time
);
2838 IWL_DEBUG_SCAN(priv
, "suspend_time 0x%X beacon interval %d\n",
2839 scan_suspend_time
, interval
);
2842 if (priv
->scan_request
->n_ssids
) {
2844 IWL_DEBUG_SCAN(priv
, "Kicking off active scan\n");
2845 for (i
= 0; i
< priv
->scan_request
->n_ssids
; i
++) {
2846 /* always does wildcard anyway */
2847 if (!priv
->scan_request
->ssids
[i
].ssid_len
)
2849 scan
->direct_scan
[p
].id
= WLAN_EID_SSID
;
2850 scan
->direct_scan
[p
].len
=
2851 priv
->scan_request
->ssids
[i
].ssid_len
;
2852 memcpy(scan
->direct_scan
[p
].ssid
,
2853 priv
->scan_request
->ssids
[i
].ssid
,
2854 priv
->scan_request
->ssids
[i
].ssid_len
);
2860 IWL_DEBUG_SCAN(priv
, "Kicking off passive scan.\n");
2862 /* We don't build a direct scan probe request; the uCode will do
2863 * that based on the direct_mask added to each channel entry */
2864 scan
->tx_cmd
.tx_flags
= TX_CMD_FLG_SEQ_CTL_MSK
;
2865 scan
->tx_cmd
.sta_id
= priv
->hw_params
.bcast_sta_id
;
2866 scan
->tx_cmd
.stop_time
.life_time
= TX_CMD_LIFE_TIME_INFINITE
;
2868 /* flags + rate selection */
2870 if (priv
->scan_bands
& BIT(IEEE80211_BAND_2GHZ
)) {
2871 scan
->flags
= RXON_FLG_BAND_24G_MSK
| RXON_FLG_AUTO_DETECT_MSK
;
2872 scan
->tx_cmd
.rate
= IWL_RATE_1M_PLCP
;
2873 scan
->good_CRC_th
= 0;
2874 band
= IEEE80211_BAND_2GHZ
;
2875 } else if (priv
->scan_bands
& BIT(IEEE80211_BAND_5GHZ
)) {
2876 scan
->tx_cmd
.rate
= IWL_RATE_6M_PLCP
;
2878 * If active scaning is requested but a certain channel
2879 * is marked passive, we can do active scanning if we
2880 * detect transmissions.
2882 scan
->good_CRC_th
= is_active
? IWL_GOOD_CRC_TH
: 0;
2883 band
= IEEE80211_BAND_5GHZ
;
2885 IWL_WARN(priv
, "Invalid scan band count\n");
2889 scan
->tx_cmd
.len
= cpu_to_le16(
2890 iwl_fill_probe_req(priv
,
2891 (struct ieee80211_mgmt
*)scan
->data
,
2892 priv
->scan_request
->ie
,
2893 priv
->scan_request
->ie_len
,
2894 IWL_MAX_SCAN_SIZE
- sizeof(*scan
)));
2896 /* select Rx antennas */
2897 scan
->flags
|= iwl3945_get_antenna_flags(priv
);
2899 if (iwl_is_monitor_mode(priv
))
2900 scan
->filter_flags
= RXON_FILTER_PROMISC_MSK
;
2902 scan
->channel_count
=
2903 iwl3945_get_channels_for_scan(priv
, band
, is_active
, n_probes
,
2904 (void *)&scan
->data
[le16_to_cpu(scan
->tx_cmd
.len
)]);
2906 if (scan
->channel_count
== 0) {
2907 IWL_DEBUG_SCAN(priv
, "channel count %d\n", scan
->channel_count
);
2911 cmd
.len
+= le16_to_cpu(scan
->tx_cmd
.len
) +
2912 scan
->channel_count
* sizeof(struct iwl3945_scan_channel
);
2914 scan
->len
= cpu_to_le16(cmd
.len
);
2916 set_bit(STATUS_SCAN_HW
, &priv
->status
);
2917 rc
= iwl_send_cmd_sync(priv
, &cmd
);
2921 queue_delayed_work(priv
->workqueue
, &priv
->scan_check
,
2922 IWL_SCAN_CHECK_WATCHDOG
);
2924 mutex_unlock(&priv
->mutex
);
2928 /* can not perform scan make sure we clear scanning
2929 * bits from status so next scan request can be performed.
2930 * if we dont clear scanning status bit here all next scan
2933 clear_bit(STATUS_SCAN_HW
, &priv
->status
);
2934 clear_bit(STATUS_SCANNING
, &priv
->status
);
2936 /* inform mac80211 scan aborted */
2937 queue_work(priv
->workqueue
, &priv
->scan_completed
);
2938 mutex_unlock(&priv
->mutex
);
2941 static void iwl3945_bg_up(struct work_struct
*data
)
2943 struct iwl_priv
*priv
= container_of(data
, struct iwl_priv
, up
);
2945 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
2948 mutex_lock(&priv
->mutex
);
2950 mutex_unlock(&priv
->mutex
);
2953 static void iwl3945_bg_restart(struct work_struct
*data
)
2955 struct iwl_priv
*priv
= container_of(data
, struct iwl_priv
, restart
);
2957 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
2960 if (test_and_clear_bit(STATUS_FW_ERROR
, &priv
->status
)) {
2961 mutex_lock(&priv
->mutex
);
2964 mutex_unlock(&priv
->mutex
);
2966 ieee80211_restart_hw(priv
->hw
);
2969 queue_work(priv
->workqueue
, &priv
->up
);
2973 static void iwl3945_bg_rx_replenish(struct work_struct
*data
)
2975 struct iwl_priv
*priv
=
2976 container_of(data
, struct iwl_priv
, rx_replenish
);
2978 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
2981 mutex_lock(&priv
->mutex
);
2982 iwl3945_rx_replenish(priv
);
2983 mutex_unlock(&priv
->mutex
);
2986 #define IWL_DELAY_NEXT_SCAN (HZ*2)
2988 void iwl3945_post_associate(struct iwl_priv
*priv
)
2991 struct ieee80211_conf
*conf
= NULL
;
2993 if (priv
->iw_mode
== NL80211_IFTYPE_AP
) {
2994 IWL_ERR(priv
, "%s Should not be called in AP mode\n", __func__
);
2999 IWL_DEBUG_ASSOC(priv
, "Associated as %d to: %pM\n",
3000 priv
->assoc_id
, priv
->active_rxon
.bssid_addr
);
3002 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
3005 if (!priv
->vif
|| !priv
->is_open
)
3008 iwl_scan_cancel_timeout(priv
, 200);
3010 conf
= ieee80211_get_hw_conf(priv
->hw
);
3012 priv
->staging_rxon
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
3013 iwlcore_commit_rxon(priv
);
3015 memset(&priv
->rxon_timing
, 0, sizeof(struct iwl_rxon_time_cmd
));
3016 iwl_setup_rxon_timing(priv
);
3017 rc
= iwl_send_cmd_pdu(priv
, REPLY_RXON_TIMING
,
3018 sizeof(priv
->rxon_timing
), &priv
->rxon_timing
);
3020 IWL_WARN(priv
, "REPLY_RXON_TIMING failed - "
3021 "Attempting to continue.\n");
3023 priv
->staging_rxon
.filter_flags
|= RXON_FILTER_ASSOC_MSK
;
3025 priv
->staging_rxon
.assoc_id
= cpu_to_le16(priv
->assoc_id
);
3027 IWL_DEBUG_ASSOC(priv
, "assoc id %d beacon interval %d\n",
3028 priv
->assoc_id
, priv
->beacon_int
);
3030 if (priv
->assoc_capability
& WLAN_CAPABILITY_SHORT_PREAMBLE
)
3031 priv
->staging_rxon
.flags
|= RXON_FLG_SHORT_PREAMBLE_MSK
;
3033 priv
->staging_rxon
.flags
&= ~RXON_FLG_SHORT_PREAMBLE_MSK
;
3035 if (priv
->staging_rxon
.flags
& RXON_FLG_BAND_24G_MSK
) {
3036 if (priv
->assoc_capability
& WLAN_CAPABILITY_SHORT_SLOT_TIME
)
3037 priv
->staging_rxon
.flags
|= RXON_FLG_SHORT_SLOT_MSK
;
3039 priv
->staging_rxon
.flags
&= ~RXON_FLG_SHORT_SLOT_MSK
;
3041 if (priv
->iw_mode
== NL80211_IFTYPE_ADHOC
)
3042 priv
->staging_rxon
.flags
&= ~RXON_FLG_SHORT_SLOT_MSK
;
3046 iwlcore_commit_rxon(priv
);
3048 switch (priv
->iw_mode
) {
3049 case NL80211_IFTYPE_STATION
:
3050 iwl3945_rate_scale_init(priv
->hw
, IWL_AP_ID
);
3053 case NL80211_IFTYPE_ADHOC
:
3056 iwl_add_station(priv
, priv
->bssid
, 0, CMD_SYNC
, NULL
);
3057 iwl3945_sync_sta(priv
, IWL_STA_ID
,
3058 (priv
->band
== IEEE80211_BAND_5GHZ
) ?
3059 IWL_RATE_6M_PLCP
: IWL_RATE_1M_PLCP
,
3061 iwl3945_rate_scale_init(priv
->hw
, IWL_STA_ID
);
3062 iwl3945_send_beacon_cmd(priv
);
3067 IWL_ERR(priv
, "%s Should not be called in %d mode\n",
3068 __func__
, priv
->iw_mode
);
3072 iwl_activate_qos(priv
, 0);
3074 /* we have just associated, don't start scan too early */
3075 priv
->next_scan_jiffies
= jiffies
+ IWL_DELAY_NEXT_SCAN
;
3078 /*****************************************************************************
3080 * mac80211 entry point functions
3082 *****************************************************************************/
3084 #define UCODE_READY_TIMEOUT (2 * HZ)
3086 static int iwl3945_mac_start(struct ieee80211_hw
*hw
)
3088 struct iwl_priv
*priv
= hw
->priv
;
3091 IWL_DEBUG_MAC80211(priv
, "enter\n");
3093 /* we should be verifying the device is ready to be opened */
3094 mutex_lock(&priv
->mutex
);
3096 /* fetch ucode file from disk, alloc and copy to bus-master buffers ...
3097 * ucode filename and max sizes are card-specific. */
3099 if (!priv
->ucode_code
.len
) {
3100 ret
= iwl3945_read_ucode(priv
);
3102 IWL_ERR(priv
, "Could not read microcode: %d\n", ret
);
3103 mutex_unlock(&priv
->mutex
);
3104 goto out_release_irq
;
3108 ret
= __iwl3945_up(priv
);
3110 mutex_unlock(&priv
->mutex
);
3113 goto out_release_irq
;
3115 IWL_DEBUG_INFO(priv
, "Start UP work.\n");
3117 /* Wait for START_ALIVE from ucode. Otherwise callbacks from
3118 * mac80211 will not be run successfully. */
3119 ret
= wait_event_interruptible_timeout(priv
->wait_command_queue
,
3120 test_bit(STATUS_READY
, &priv
->status
),
3121 UCODE_READY_TIMEOUT
);
3123 if (!test_bit(STATUS_READY
, &priv
->status
)) {
3125 "Wait for START_ALIVE timeout after %dms.\n",
3126 jiffies_to_msecs(UCODE_READY_TIMEOUT
));
3128 goto out_release_irq
;
3132 /* ucode is running and will send rfkill notifications,
3133 * no need to poll the killswitch state anymore */
3134 cancel_delayed_work(&priv
->rfkill_poll
);
3137 IWL_DEBUG_MAC80211(priv
, "leave\n");
3142 IWL_DEBUG_MAC80211(priv
, "leave - failed\n");
3146 static void iwl3945_mac_stop(struct ieee80211_hw
*hw
)
3148 struct iwl_priv
*priv
= hw
->priv
;
3150 IWL_DEBUG_MAC80211(priv
, "enter\n");
3152 if (!priv
->is_open
) {
3153 IWL_DEBUG_MAC80211(priv
, "leave - skip\n");
3159 if (iwl_is_ready_rf(priv
)) {
3160 /* stop mac, cancel any scan request and clear
3161 * RXON_FILTER_ASSOC_MSK BIT
3163 mutex_lock(&priv
->mutex
);
3164 iwl_scan_cancel_timeout(priv
, 100);
3165 mutex_unlock(&priv
->mutex
);
3170 flush_workqueue(priv
->workqueue
);
3172 /* start polling the killswitch state again */
3173 queue_delayed_work(priv
->workqueue
, &priv
->rfkill_poll
,
3174 round_jiffies_relative(2 * HZ
));
3176 IWL_DEBUG_MAC80211(priv
, "leave\n");
3179 static int iwl3945_mac_tx(struct ieee80211_hw
*hw
, struct sk_buff
*skb
)
3181 struct iwl_priv
*priv
= hw
->priv
;
3183 IWL_DEBUG_MAC80211(priv
, "enter\n");
3185 IWL_DEBUG_TX(priv
, "dev->xmit(%d bytes) at rate 0x%02x\n", skb
->len
,
3186 ieee80211_get_tx_rate(hw
, IEEE80211_SKB_CB(skb
))->bitrate
);
3188 if (iwl3945_tx_skb(priv
, skb
))
3189 dev_kfree_skb_any(skb
);
3191 IWL_DEBUG_MAC80211(priv
, "leave\n");
3192 return NETDEV_TX_OK
;
3195 void iwl3945_config_ap(struct iwl_priv
*priv
)
3199 if (test_bit(STATUS_EXIT_PENDING
, &priv
->status
))
3202 /* The following should be done only at AP bring up */
3203 if (!(iwl_is_associated(priv
))) {
3205 /* RXON - unassoc (to set timing command) */
3206 priv
->staging_rxon
.filter_flags
&= ~RXON_FILTER_ASSOC_MSK
;
3207 iwlcore_commit_rxon(priv
);
3210 memset(&priv
->rxon_timing
, 0, sizeof(struct iwl_rxon_time_cmd
));
3211 iwl_setup_rxon_timing(priv
);
3212 rc
= iwl_send_cmd_pdu(priv
, REPLY_RXON_TIMING
,
3213 sizeof(priv
->rxon_timing
),
3214 &priv
->rxon_timing
);
3216 IWL_WARN(priv
, "REPLY_RXON_TIMING failed - "
3217 "Attempting to continue.\n");
3219 /* FIXME: what should be the assoc_id for AP? */
3220 priv
->staging_rxon
.assoc_id
= cpu_to_le16(priv
->assoc_id
);
3221 if (priv
->assoc_capability
& WLAN_CAPABILITY_SHORT_PREAMBLE
)
3222 priv
->staging_rxon
.flags
|=
3223 RXON_FLG_SHORT_PREAMBLE_MSK
;
3225 priv
->staging_rxon
.flags
&=
3226 ~RXON_FLG_SHORT_PREAMBLE_MSK
;
3228 if (priv
->staging_rxon
.flags
& RXON_FLG_BAND_24G_MSK
) {
3229 if (priv
->assoc_capability
&
3230 WLAN_CAPABILITY_SHORT_SLOT_TIME
)
3231 priv
->staging_rxon
.flags
|=
3232 RXON_FLG_SHORT_SLOT_MSK
;
3234 priv
->staging_rxon
.flags
&=
3235 ~RXON_FLG_SHORT_SLOT_MSK
;
3237 if (priv
->iw_mode
== NL80211_IFTYPE_ADHOC
)
3238 priv
->staging_rxon
.flags
&=
3239 ~RXON_FLG_SHORT_SLOT_MSK
;
3241 /* restore RXON assoc */
3242 priv
->staging_rxon
.filter_flags
|= RXON_FILTER_ASSOC_MSK
;
3243 iwlcore_commit_rxon(priv
);
3244 iwl_add_station(priv
, iwl_bcast_addr
, 0, CMD_SYNC
, NULL
);
3246 iwl3945_send_beacon_cmd(priv
);
3248 /* FIXME - we need to add code here to detect a totally new
3249 * configuration, reset the AP, unassoc, rxon timing, assoc,
3250 * clear sta table, add BCAST sta... */
3253 static int iwl3945_mac_set_key(struct ieee80211_hw
*hw
, enum set_key_cmd cmd
,
3254 struct ieee80211_vif
*vif
,
3255 struct ieee80211_sta
*sta
,
3256 struct ieee80211_key_conf
*key
)
3258 struct iwl_priv
*priv
= hw
->priv
;
3261 u8 sta_id
= IWL_INVALID_STATION
;
3264 IWL_DEBUG_MAC80211(priv
, "enter\n");
3266 if (iwl3945_mod_params
.sw_crypto
) {
3267 IWL_DEBUG_MAC80211(priv
, "leave - hwcrypto disabled\n");
3271 addr
= sta
? sta
->addr
: iwl_bcast_addr
;
3272 static_key
= !iwl_is_associated(priv
);
3275 sta_id
= iwl_find_station(priv
, addr
);
3276 if (sta_id
== IWL_INVALID_STATION
) {
3277 IWL_DEBUG_MAC80211(priv
, "leave - %pM not in station map.\n",
3283 mutex_lock(&priv
->mutex
);
3284 iwl_scan_cancel_timeout(priv
, 100);
3285 mutex_unlock(&priv
->mutex
);
3290 ret
= iwl3945_set_static_key(priv
, key
);
3292 ret
= iwl3945_set_dynamic_key(priv
, key
, sta_id
);
3293 IWL_DEBUG_MAC80211(priv
, "enable hwcrypto key\n");
3297 ret
= iwl3945_remove_static_key(priv
);
3299 ret
= iwl3945_clear_sta_key_info(priv
, sta_id
);
3300 IWL_DEBUG_MAC80211(priv
, "disable hwcrypto key\n");
3306 IWL_DEBUG_MAC80211(priv
, "leave\n");
3311 /*****************************************************************************
3315 *****************************************************************************/
3317 #ifdef CONFIG_IWLWIFI_DEBUG
3320 * The following adds a new attribute to the sysfs representation
3321 * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/)
3322 * used for controlling the debug level.
3324 * See the level definitions in iwl for details.
3326 * The debug_level being managed using sysfs below is a per device debug
3327 * level that is used instead of the global debug level if it (the per
3328 * device debug level) is set.
3330 static ssize_t
show_debug_level(struct device
*d
,
3331 struct device_attribute
*attr
, char *buf
)
3333 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3334 return sprintf(buf
, "0x%08X\n", iwl_get_debug_level(priv
));
3336 static ssize_t
store_debug_level(struct device
*d
,
3337 struct device_attribute
*attr
,
3338 const char *buf
, size_t count
)
3340 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3344 ret
= strict_strtoul(buf
, 0, &val
);
3346 IWL_INFO(priv
, "%s is not in hex or decimal form.\n", buf
);
3348 priv
->debug_level
= val
;
3349 if (iwl_alloc_traffic_mem(priv
))
3351 "Not enough memory to generate traffic log\n");
3353 return strnlen(buf
, count
);
3356 static DEVICE_ATTR(debug_level
, S_IWUSR
| S_IRUGO
,
3357 show_debug_level
, store_debug_level
);
3359 #endif /* CONFIG_IWLWIFI_DEBUG */
3361 static ssize_t
show_temperature(struct device
*d
,
3362 struct device_attribute
*attr
, char *buf
)
3364 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3366 if (!iwl_is_alive(priv
))
3369 return sprintf(buf
, "%d\n", iwl3945_hw_get_temperature(priv
));
3372 static DEVICE_ATTR(temperature
, S_IRUGO
, show_temperature
, NULL
);
3374 static ssize_t
show_tx_power(struct device
*d
,
3375 struct device_attribute
*attr
, char *buf
)
3377 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3378 return sprintf(buf
, "%d\n", priv
->tx_power_user_lmt
);
3381 static ssize_t
store_tx_power(struct device
*d
,
3382 struct device_attribute
*attr
,
3383 const char *buf
, size_t count
)
3385 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3386 char *p
= (char *)buf
;
3389 val
= simple_strtoul(p
, &p
, 10);
3391 IWL_INFO(priv
, ": %s is not in decimal form.\n", buf
);
3393 iwl3945_hw_reg_set_txpower(priv
, val
);
3398 static DEVICE_ATTR(tx_power
, S_IWUSR
| S_IRUGO
, show_tx_power
, store_tx_power
);
3400 static ssize_t
show_flags(struct device
*d
,
3401 struct device_attribute
*attr
, char *buf
)
3403 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3405 return sprintf(buf
, "0x%04X\n", priv
->active_rxon
.flags
);
3408 static ssize_t
store_flags(struct device
*d
,
3409 struct device_attribute
*attr
,
3410 const char *buf
, size_t count
)
3412 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3413 u32 flags
= simple_strtoul(buf
, NULL
, 0);
3415 mutex_lock(&priv
->mutex
);
3416 if (le32_to_cpu(priv
->staging_rxon
.flags
) != flags
) {
3417 /* Cancel any currently running scans... */
3418 if (iwl_scan_cancel_timeout(priv
, 100))
3419 IWL_WARN(priv
, "Could not cancel scan.\n");
3421 IWL_DEBUG_INFO(priv
, "Committing rxon.flags = 0x%04X\n",
3423 priv
->staging_rxon
.flags
= cpu_to_le32(flags
);
3424 iwlcore_commit_rxon(priv
);
3427 mutex_unlock(&priv
->mutex
);
3432 static DEVICE_ATTR(flags
, S_IWUSR
| S_IRUGO
, show_flags
, store_flags
);
3434 static ssize_t
show_filter_flags(struct device
*d
,
3435 struct device_attribute
*attr
, char *buf
)
3437 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3439 return sprintf(buf
, "0x%04X\n",
3440 le32_to_cpu(priv
->active_rxon
.filter_flags
));
3443 static ssize_t
store_filter_flags(struct device
*d
,
3444 struct device_attribute
*attr
,
3445 const char *buf
, size_t count
)
3447 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3448 u32 filter_flags
= simple_strtoul(buf
, NULL
, 0);
3450 mutex_lock(&priv
->mutex
);
3451 if (le32_to_cpu(priv
->staging_rxon
.filter_flags
) != filter_flags
) {
3452 /* Cancel any currently running scans... */
3453 if (iwl_scan_cancel_timeout(priv
, 100))
3454 IWL_WARN(priv
, "Could not cancel scan.\n");
3456 IWL_DEBUG_INFO(priv
, "Committing rxon.filter_flags = "
3457 "0x%04X\n", filter_flags
);
3458 priv
->staging_rxon
.filter_flags
=
3459 cpu_to_le32(filter_flags
);
3460 iwlcore_commit_rxon(priv
);
3463 mutex_unlock(&priv
->mutex
);
3468 static DEVICE_ATTR(filter_flags
, S_IWUSR
| S_IRUGO
, show_filter_flags
,
3469 store_filter_flags
);
3471 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
3473 static ssize_t
show_measurement(struct device
*d
,
3474 struct device_attribute
*attr
, char *buf
)
3476 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3477 struct iwl_spectrum_notification measure_report
;
3478 u32 size
= sizeof(measure_report
), len
= 0, ofs
= 0;
3479 u8
*data
= (u8
*)&measure_report
;
3480 unsigned long flags
;
3482 spin_lock_irqsave(&priv
->lock
, flags
);
3483 if (!(priv
->measurement_status
& MEASUREMENT_READY
)) {
3484 spin_unlock_irqrestore(&priv
->lock
, flags
);
3487 memcpy(&measure_report
, &priv
->measure_report
, size
);
3488 priv
->measurement_status
= 0;
3489 spin_unlock_irqrestore(&priv
->lock
, flags
);
3491 while (size
&& (PAGE_SIZE
- len
)) {
3492 hex_dump_to_buffer(data
+ ofs
, size
, 16, 1, buf
+ len
,
3493 PAGE_SIZE
- len
, 1);
3495 if (PAGE_SIZE
- len
)
3499 size
-= min(size
, 16U);
3505 static ssize_t
store_measurement(struct device
*d
,
3506 struct device_attribute
*attr
,
3507 const char *buf
, size_t count
)
3509 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3510 struct ieee80211_measurement_params params
= {
3511 .channel
= le16_to_cpu(priv
->active_rxon
.channel
),
3512 .start_time
= cpu_to_le64(priv
->last_tsf
),
3513 .duration
= cpu_to_le16(1),
3515 u8 type
= IWL_MEASURE_BASIC
;
3521 strncpy(buffer
, buf
, min(sizeof(buffer
), count
));
3522 channel
= simple_strtoul(p
, NULL
, 0);
3524 params
.channel
= channel
;
3527 while (*p
&& *p
!= ' ')
3530 type
= simple_strtoul(p
+ 1, NULL
, 0);
3533 IWL_DEBUG_INFO(priv
, "Invoking measurement of type %d on "
3534 "channel %d (for '%s')\n", type
, params
.channel
, buf
);
3535 iwl3945_get_measurement(priv
, ¶ms
, type
);
3540 static DEVICE_ATTR(measurement
, S_IRUSR
| S_IWUSR
,
3541 show_measurement
, store_measurement
);
3542 #endif /* CONFIG_IWL3945_SPECTRUM_MEASUREMENT */
3544 static ssize_t
store_retry_rate(struct device
*d
,
3545 struct device_attribute
*attr
,
3546 const char *buf
, size_t count
)
3548 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3550 priv
->retry_rate
= simple_strtoul(buf
, NULL
, 0);
3551 if (priv
->retry_rate
<= 0)
3552 priv
->retry_rate
= 1;
3557 static ssize_t
show_retry_rate(struct device
*d
,
3558 struct device_attribute
*attr
, char *buf
)
3560 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3561 return sprintf(buf
, "%d", priv
->retry_rate
);
3564 static DEVICE_ATTR(retry_rate
, S_IWUSR
| S_IRUSR
, show_retry_rate
,
3568 static ssize_t
show_channels(struct device
*d
,
3569 struct device_attribute
*attr
, char *buf
)
3571 /* all this shit doesn't belong into sysfs anyway */
3575 static DEVICE_ATTR(channels
, S_IRUSR
, show_channels
, NULL
);
3577 static ssize_t
show_statistics(struct device
*d
,
3578 struct device_attribute
*attr
, char *buf
)
3580 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3581 u32 size
= sizeof(struct iwl3945_notif_statistics
);
3582 u32 len
= 0, ofs
= 0;
3583 u8
*data
= (u8
*)&priv
->statistics_39
;
3586 if (!iwl_is_alive(priv
))
3589 mutex_lock(&priv
->mutex
);
3590 rc
= iwl_send_statistics_request(priv
, 0);
3591 mutex_unlock(&priv
->mutex
);
3595 "Error sending statistics request: 0x%08X\n", rc
);
3599 while (size
&& (PAGE_SIZE
- len
)) {
3600 hex_dump_to_buffer(data
+ ofs
, size
, 16, 1, buf
+ len
,
3601 PAGE_SIZE
- len
, 1);
3603 if (PAGE_SIZE
- len
)
3607 size
-= min(size
, 16U);
3613 static DEVICE_ATTR(statistics
, S_IRUGO
, show_statistics
, NULL
);
3615 static ssize_t
show_antenna(struct device
*d
,
3616 struct device_attribute
*attr
, char *buf
)
3618 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3620 if (!iwl_is_alive(priv
))
3623 return sprintf(buf
, "%d\n", iwl3945_mod_params
.antenna
);
3626 static ssize_t
store_antenna(struct device
*d
,
3627 struct device_attribute
*attr
,
3628 const char *buf
, size_t count
)
3630 struct iwl_priv
*priv __maybe_unused
= dev_get_drvdata(d
);
3636 if (sscanf(buf
, "%1i", &ant
) != 1) {
3637 IWL_DEBUG_INFO(priv
, "not in hex or decimal form.\n");
3641 if ((ant
>= 0) && (ant
<= 2)) {
3642 IWL_DEBUG_INFO(priv
, "Setting antenna select to %d.\n", ant
);
3643 iwl3945_mod_params
.antenna
= (enum iwl3945_antenna
)ant
;
3645 IWL_DEBUG_INFO(priv
, "Bad antenna select value %d.\n", ant
);
3651 static DEVICE_ATTR(antenna
, S_IWUSR
| S_IRUGO
, show_antenna
, store_antenna
);
3653 static ssize_t
show_status(struct device
*d
,
3654 struct device_attribute
*attr
, char *buf
)
3656 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3657 if (!iwl_is_alive(priv
))
3659 return sprintf(buf
, "0x%08x\n", (int)priv
->status
);
3662 static DEVICE_ATTR(status
, S_IRUGO
, show_status
, NULL
);
3664 static ssize_t
dump_error_log(struct device
*d
,
3665 struct device_attribute
*attr
,
3666 const char *buf
, size_t count
)
3668 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3669 char *p
= (char *)buf
;
3672 iwl3945_dump_nic_error_log(priv
);
3674 return strnlen(buf
, count
);
3677 static DEVICE_ATTR(dump_errors
, S_IWUSR
, NULL
, dump_error_log
);
3679 static ssize_t
dump_event_log(struct device
*d
,
3680 struct device_attribute
*attr
,
3681 const char *buf
, size_t count
)
3683 struct iwl_priv
*priv
= dev_get_drvdata(d
);
3684 char *p
= (char *)buf
;
3687 iwl3945_dump_nic_event_log(priv
);
3689 return strnlen(buf
, count
);
3692 static DEVICE_ATTR(dump_events
, S_IWUSR
, NULL
, dump_event_log
);
3694 /*****************************************************************************
3696 * driver setup and tear down
3698 *****************************************************************************/
3700 static void iwl3945_setup_deferred_work(struct iwl_priv
*priv
)
3702 priv
->workqueue
= create_singlethread_workqueue(DRV_NAME
);
3704 init_waitqueue_head(&priv
->wait_command_queue
);
3706 INIT_WORK(&priv
->up
, iwl3945_bg_up
);
3707 INIT_WORK(&priv
->restart
, iwl3945_bg_restart
);
3708 INIT_WORK(&priv
->rx_replenish
, iwl3945_bg_rx_replenish
);
3709 INIT_WORK(&priv
->beacon_update
, iwl3945_bg_beacon_update
);
3710 INIT_DELAYED_WORK(&priv
->init_alive_start
, iwl3945_bg_init_alive_start
);
3711 INIT_DELAYED_WORK(&priv
->alive_start
, iwl3945_bg_alive_start
);
3712 INIT_DELAYED_WORK(&priv
->rfkill_poll
, iwl3945_rfkill_poll
);
3713 INIT_WORK(&priv
->scan_completed
, iwl_bg_scan_completed
);
3714 INIT_WORK(&priv
->request_scan
, iwl3945_bg_request_scan
);
3715 INIT_WORK(&priv
->abort_scan
, iwl_bg_abort_scan
);
3716 INIT_DELAYED_WORK(&priv
->scan_check
, iwl_bg_scan_check
);
3718 iwl3945_hw_setup_deferred_work(priv
);
3720 tasklet_init(&priv
->irq_tasklet
, (void (*)(unsigned long))
3721 iwl3945_irq_tasklet
, (unsigned long)priv
);
3724 static void iwl3945_cancel_deferred_work(struct iwl_priv
*priv
)
3726 iwl3945_hw_cancel_deferred_work(priv
);
3728 cancel_delayed_work_sync(&priv
->init_alive_start
);
3729 cancel_delayed_work(&priv
->scan_check
);
3730 cancel_delayed_work(&priv
->alive_start
);
3731 cancel_work_sync(&priv
->beacon_update
);
3734 static struct attribute
*iwl3945_sysfs_entries
[] = {
3735 &dev_attr_antenna
.attr
,
3736 &dev_attr_channels
.attr
,
3737 &dev_attr_dump_errors
.attr
,
3738 &dev_attr_dump_events
.attr
,
3739 &dev_attr_flags
.attr
,
3740 &dev_attr_filter_flags
.attr
,
3741 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
3742 &dev_attr_measurement
.attr
,
3744 &dev_attr_retry_rate
.attr
,
3745 &dev_attr_statistics
.attr
,
3746 &dev_attr_status
.attr
,
3747 &dev_attr_temperature
.attr
,
3748 &dev_attr_tx_power
.attr
,
3749 #ifdef CONFIG_IWLWIFI_DEBUG
3750 &dev_attr_debug_level
.attr
,
3755 static struct attribute_group iwl3945_attribute_group
= {
3756 .name
= NULL
, /* put in device directory */
3757 .attrs
= iwl3945_sysfs_entries
,
3760 static struct ieee80211_ops iwl3945_hw_ops
= {
3761 .tx
= iwl3945_mac_tx
,
3762 .start
= iwl3945_mac_start
,
3763 .stop
= iwl3945_mac_stop
,
3764 .add_interface
= iwl_mac_add_interface
,
3765 .remove_interface
= iwl_mac_remove_interface
,
3766 .config
= iwl_mac_config
,
3767 .configure_filter
= iwl_configure_filter
,
3768 .set_key
= iwl3945_mac_set_key
,
3769 .get_tx_stats
= iwl_mac_get_tx_stats
,
3770 .conf_tx
= iwl_mac_conf_tx
,
3771 .reset_tsf
= iwl_mac_reset_tsf
,
3772 .bss_info_changed
= iwl_bss_info_changed
,
3773 .hw_scan
= iwl_mac_hw_scan
3776 static int iwl3945_init_drv(struct iwl_priv
*priv
)
3779 struct iwl3945_eeprom
*eeprom
= (struct iwl3945_eeprom
*)priv
->eeprom
;
3781 priv
->retry_rate
= 1;
3782 priv
->ibss_beacon
= NULL
;
3784 spin_lock_init(&priv
->lock
);
3785 spin_lock_init(&priv
->sta_lock
);
3786 spin_lock_init(&priv
->hcmd_lock
);
3788 INIT_LIST_HEAD(&priv
->free_frames
);
3790 mutex_init(&priv
->mutex
);
3792 /* Clear the driver's (not device's) station table */
3793 iwl_clear_stations_table(priv
);
3795 priv
->data_retry_limit
= -1;
3796 priv
->ieee_channels
= NULL
;
3797 priv
->ieee_rates
= NULL
;
3798 priv
->band
= IEEE80211_BAND_2GHZ
;
3800 priv
->iw_mode
= NL80211_IFTYPE_STATION
;
3802 iwl_reset_qos(priv
);
3804 priv
->qos_data
.qos_active
= 0;
3805 priv
->qos_data
.qos_cap
.val
= 0;
3807 priv
->rates_mask
= IWL_RATES_MASK
;
3808 priv
->tx_power_user_lmt
= IWL_DEFAULT_TX_POWER
;
3810 if (eeprom
->version
< EEPROM_3945_EEPROM_VERSION
) {
3811 IWL_WARN(priv
, "Unsupported EEPROM version: 0x%04X\n",
3816 ret
= iwl_init_channel_map(priv
);
3818 IWL_ERR(priv
, "initializing regulatory failed: %d\n", ret
);
3822 /* Set up txpower settings in driver for all channels */
3823 if (iwl3945_txpower_set_from_eeprom(priv
)) {
3825 goto err_free_channel_map
;
3828 ret
= iwlcore_init_geos(priv
);
3830 IWL_ERR(priv
, "initializing geos failed: %d\n", ret
);
3831 goto err_free_channel_map
;
3833 iwl3945_init_hw_rates(priv
, priv
->ieee_rates
);
3837 err_free_channel_map
:
3838 iwl_free_channel_map(priv
);
3843 static int iwl3945_setup_mac(struct iwl_priv
*priv
)
3846 struct ieee80211_hw
*hw
= priv
->hw
;
3848 hw
->rate_control_algorithm
= "iwl-3945-rs";
3849 hw
->sta_data_size
= sizeof(struct iwl3945_sta_priv
);
3851 /* Tell mac80211 our characteristics */
3852 hw
->flags
= IEEE80211_HW_SIGNAL_DBM
|
3853 IEEE80211_HW_NOISE_DBM
|
3854 IEEE80211_HW_SPECTRUM_MGMT
|
3855 IEEE80211_HW_SUPPORTS_PS
|
3856 IEEE80211_HW_SUPPORTS_DYNAMIC_PS
;
3858 hw
->wiphy
->interface_modes
=
3859 BIT(NL80211_IFTYPE_STATION
) |
3860 BIT(NL80211_IFTYPE_ADHOC
);
3862 hw
->wiphy
->custom_regulatory
= true;
3864 /* Firmware does not support this */
3865 hw
->wiphy
->disable_beacon_hints
= true;
3867 hw
->wiphy
->max_scan_ssids
= PROBE_OPTION_MAX_3945
;
3868 /* we create the 802.11 header and a zero-length SSID element */
3869 hw
->wiphy
->max_scan_ie_len
= IWL_MAX_PROBE_REQUEST
- 24 - 2;
3871 /* Default value; 4 EDCA QOS priorities */
3874 if (priv
->bands
[IEEE80211_BAND_2GHZ
].n_channels
)
3875 priv
->hw
->wiphy
->bands
[IEEE80211_BAND_2GHZ
] =
3876 &priv
->bands
[IEEE80211_BAND_2GHZ
];
3878 if (priv
->bands
[IEEE80211_BAND_5GHZ
].n_channels
)
3879 priv
->hw
->wiphy
->bands
[IEEE80211_BAND_5GHZ
] =
3880 &priv
->bands
[IEEE80211_BAND_5GHZ
];
3882 ret
= ieee80211_register_hw(priv
->hw
);
3884 IWL_ERR(priv
, "Failed to register hw (error %d)\n", ret
);
3887 priv
->mac80211_registered
= 1;
3892 static int iwl3945_pci_probe(struct pci_dev
*pdev
, const struct pci_device_id
*ent
)
3895 struct iwl_priv
*priv
;
3896 struct ieee80211_hw
*hw
;
3897 struct iwl_cfg
*cfg
= (struct iwl_cfg
*)(ent
->driver_data
);
3898 struct iwl3945_eeprom
*eeprom
;
3899 unsigned long flags
;
3901 /***********************
3902 * 1. Allocating HW data
3903 * ********************/
3905 /* mac80211 allocates memory for this device instance, including
3906 * space for this driver's private structure */
3907 hw
= iwl_alloc_all(cfg
, &iwl3945_hw_ops
);
3909 printk(KERN_ERR DRV_NAME
"Can not allocate network device\n");
3914 SET_IEEE80211_DEV(hw
, &pdev
->dev
);
3917 * Disabling hardware scan means that mac80211 will perform scans
3918 * "the hard way", rather than using device's scan.
3920 if (iwl3945_mod_params
.disable_hw_scan
) {
3921 IWL_DEBUG_INFO(priv
, "Disabling hw_scan\n");
3922 iwl3945_hw_ops
.hw_scan
= NULL
;
3926 IWL_DEBUG_INFO(priv
, "*** LOAD DRIVER ***\n");
3928 priv
->pci_dev
= pdev
;
3929 priv
->inta_mask
= CSR_INI_SET_MASK
;
3931 #ifdef CONFIG_IWLWIFI_DEBUG
3932 atomic_set(&priv
->restrict_refcnt
, 0);
3934 if (iwl_alloc_traffic_mem(priv
))
3935 IWL_ERR(priv
, "Not enough memory to generate traffic log\n");
3937 /***************************
3938 * 2. Initializing PCI bus
3939 * *************************/
3940 if (pci_enable_device(pdev
)) {
3942 goto out_ieee80211_free_hw
;
3945 pci_set_master(pdev
);
3947 err
= pci_set_dma_mask(pdev
, DMA_BIT_MASK(32));
3949 err
= pci_set_consistent_dma_mask(pdev
, DMA_BIT_MASK(32));
3951 IWL_WARN(priv
, "No suitable DMA available.\n");
3952 goto out_pci_disable_device
;
3955 pci_set_drvdata(pdev
, priv
);
3956 err
= pci_request_regions(pdev
, DRV_NAME
);
3958 goto out_pci_disable_device
;
3960 /***********************
3961 * 3. Read REV Register
3962 * ********************/
3963 priv
->hw_base
= pci_iomap(pdev
, 0, 0);
3964 if (!priv
->hw_base
) {
3966 goto out_pci_release_regions
;
3969 IWL_DEBUG_INFO(priv
, "pci_resource_len = 0x%08llx\n",
3970 (unsigned long long) pci_resource_len(pdev
, 0));
3971 IWL_DEBUG_INFO(priv
, "pci_resource_base = %p\n", priv
->hw_base
);
3973 /* We disable the RETRY_TIMEOUT register (0x41) to keep
3974 * PCI Tx retries from interfering with C3 CPU state */
3975 pci_write_config_byte(pdev
, 0x41, 0x00);
3977 /* this spin lock will be used in apm_ops.init and EEPROM access
3978 * we should init now
3980 spin_lock_init(&priv
->reg_lock
);
3983 err
= priv
->cfg
->ops
->lib
->apm_ops
.init(priv
);
3985 IWL_DEBUG_INFO(priv
, "Failed to init the card\n");
3989 /***********************
3991 * ********************/
3993 /* Read the EEPROM */
3994 err
= iwl_eeprom_init(priv
);
3996 IWL_ERR(priv
, "Unable to init EEPROM\n");
3999 /* MAC Address location in EEPROM same for 3945/4965 */
4000 eeprom
= (struct iwl3945_eeprom
*)priv
->eeprom
;
4001 memcpy(priv
->mac_addr
, eeprom
->mac_address
, ETH_ALEN
);
4002 IWL_DEBUG_INFO(priv
, "MAC address: %pM\n", priv
->mac_addr
);
4003 SET_IEEE80211_PERM_ADDR(priv
->hw
, priv
->mac_addr
);
4005 /***********************
4006 * 5. Setup HW Constants
4007 * ********************/
4008 /* Device-specific setup */
4009 if (iwl3945_hw_set_hw_params(priv
)) {
4010 IWL_ERR(priv
, "failed to set hw settings\n");
4011 goto out_eeprom_free
;
4014 /***********************
4016 * ********************/
4018 err
= iwl3945_init_drv(priv
);
4020 IWL_ERR(priv
, "initializing driver failed\n");
4021 goto out_unset_hw_params
;
4024 IWL_INFO(priv
, "Detected Intel Wireless WiFi Link %s\n",
4027 /***********************
4029 * ********************/
4031 spin_lock_irqsave(&priv
->lock
, flags
);
4032 iwl_disable_interrupts(priv
);
4033 spin_unlock_irqrestore(&priv
->lock
, flags
);
4035 pci_enable_msi(priv
->pci_dev
);
4037 err
= request_irq(priv
->pci_dev
->irq
, priv
->cfg
->ops
->lib
->isr
,
4038 IRQF_SHARED
, DRV_NAME
, priv
);
4040 IWL_ERR(priv
, "Error allocating IRQ %d\n", priv
->pci_dev
->irq
);
4041 goto out_disable_msi
;
4044 err
= sysfs_create_group(&pdev
->dev
.kobj
, &iwl3945_attribute_group
);
4046 IWL_ERR(priv
, "failed to create sysfs device attributes\n");
4047 goto out_release_irq
;
4050 iwl_set_rxon_channel(priv
,
4051 &priv
->bands
[IEEE80211_BAND_2GHZ
].channels
[5]);
4052 iwl3945_setup_deferred_work(priv
);
4053 iwl3945_setup_rx_handlers(priv
);
4055 /*********************************
4056 * 8. Setup and Register mac80211
4057 * *******************************/
4059 iwl_enable_interrupts(priv
);
4061 err
= iwl3945_setup_mac(priv
);
4063 goto out_remove_sysfs
;
4065 err
= iwl_dbgfs_register(priv
, DRV_NAME
);
4067 IWL_ERR(priv
, "failed to create debugfs files. Ignoring error: %d\n", err
);
4069 /* Start monitoring the killswitch */
4070 queue_delayed_work(priv
->workqueue
, &priv
->rfkill_poll
,
4076 destroy_workqueue(priv
->workqueue
);
4077 priv
->workqueue
= NULL
;
4078 sysfs_remove_group(&pdev
->dev
.kobj
, &iwl3945_attribute_group
);
4080 free_irq(priv
->pci_dev
->irq
, priv
);
4082 pci_disable_msi(priv
->pci_dev
);
4083 iwlcore_free_geos(priv
);
4084 iwl_free_channel_map(priv
);
4085 out_unset_hw_params
:
4086 iwl3945_unset_hw_params(priv
);
4088 iwl_eeprom_free(priv
);
4090 pci_iounmap(pdev
, priv
->hw_base
);
4091 out_pci_release_regions
:
4092 pci_release_regions(pdev
);
4093 out_pci_disable_device
:
4094 pci_set_drvdata(pdev
, NULL
);
4095 pci_disable_device(pdev
);
4096 out_ieee80211_free_hw
:
4097 ieee80211_free_hw(priv
->hw
);
4098 iwl_free_traffic_mem(priv
);
4103 static void __devexit
iwl3945_pci_remove(struct pci_dev
*pdev
)
4105 struct iwl_priv
*priv
= pci_get_drvdata(pdev
);
4106 unsigned long flags
;
4111 IWL_DEBUG_INFO(priv
, "*** UNLOAD DRIVER ***\n");
4113 iwl_dbgfs_unregister(priv
);
4115 set_bit(STATUS_EXIT_PENDING
, &priv
->status
);
4117 if (priv
->mac80211_registered
) {
4118 ieee80211_unregister_hw(priv
->hw
);
4119 priv
->mac80211_registered
= 0;
4124 /* make sure we flush any pending irq or
4125 * tasklet for the driver
4127 spin_lock_irqsave(&priv
->lock
, flags
);
4128 iwl_disable_interrupts(priv
);
4129 spin_unlock_irqrestore(&priv
->lock
, flags
);
4131 iwl_synchronize_irq(priv
);
4133 sysfs_remove_group(&pdev
->dev
.kobj
, &iwl3945_attribute_group
);
4135 cancel_delayed_work_sync(&priv
->rfkill_poll
);
4137 iwl3945_dealloc_ucode_pci(priv
);
4140 iwl3945_rx_queue_free(priv
, &priv
->rxq
);
4141 iwl3945_hw_txq_ctx_free(priv
);
4143 iwl3945_unset_hw_params(priv
);
4144 iwl_clear_stations_table(priv
);
4146 /*netif_stop_queue(dev); */
4147 flush_workqueue(priv
->workqueue
);
4149 /* ieee80211_unregister_hw calls iwl3945_mac_stop, which flushes
4150 * priv->workqueue... so we can't take down the workqueue
4152 destroy_workqueue(priv
->workqueue
);
4153 priv
->workqueue
= NULL
;
4154 iwl_free_traffic_mem(priv
);
4156 free_irq(pdev
->irq
, priv
);
4157 pci_disable_msi(pdev
);
4159 pci_iounmap(pdev
, priv
->hw_base
);
4160 pci_release_regions(pdev
);
4161 pci_disable_device(pdev
);
4162 pci_set_drvdata(pdev
, NULL
);
4164 iwl_free_channel_map(priv
);
4165 iwlcore_free_geos(priv
);
4167 if (priv
->ibss_beacon
)
4168 dev_kfree_skb(priv
->ibss_beacon
);
4170 ieee80211_free_hw(priv
->hw
);
4174 /*****************************************************************************
4176 * driver and module entry point
4178 *****************************************************************************/
4180 static struct pci_driver iwl3945_driver
= {
4182 .id_table
= iwl3945_hw_card_ids
,
4183 .probe
= iwl3945_pci_probe
,
4184 .remove
= __devexit_p(iwl3945_pci_remove
),
4186 .suspend
= iwl_pci_suspend
,
4187 .resume
= iwl_pci_resume
,
4191 static int __init
iwl3945_init(void)
4195 printk(KERN_INFO DRV_NAME
": " DRV_DESCRIPTION
", " DRV_VERSION
"\n");
4196 printk(KERN_INFO DRV_NAME
": " DRV_COPYRIGHT
"\n");
4198 ret
= iwl3945_rate_control_register();
4200 printk(KERN_ERR DRV_NAME
4201 "Unable to register rate control algorithm: %d\n", ret
);
4205 ret
= pci_register_driver(&iwl3945_driver
);
4207 printk(KERN_ERR DRV_NAME
"Unable to initialize PCI module\n");
4208 goto error_register
;
4214 iwl3945_rate_control_unregister();
4218 static void __exit
iwl3945_exit(void)
4220 pci_unregister_driver(&iwl3945_driver
);
4221 iwl3945_rate_control_unregister();
4224 MODULE_FIRMWARE(IWL3945_MODULE_FIRMWARE(IWL3945_UCODE_API_MAX
));
4226 module_param_named(antenna
, iwl3945_mod_params
.antenna
, int, 0444);
4227 MODULE_PARM_DESC(antenna
, "select antenna (1=Main, 2=Aux, default 0 [both])");
4228 module_param_named(swcrypto
, iwl3945_mod_params
.sw_crypto
, int, 0444);
4229 MODULE_PARM_DESC(swcrypto
,
4230 "using software crypto (default 1 [software])\n");
4231 #ifdef CONFIG_IWLWIFI_DEBUG
4232 module_param_named(debug
, iwl_debug_level
, uint
, 0644);
4233 MODULE_PARM_DESC(debug
, "debug output mask");
4235 module_param_named(disable_hw_scan
, iwl3945_mod_params
.disable_hw_scan
, int, 0444);
4236 MODULE_PARM_DESC(disable_hw_scan
, "disable hardware scanning (default 0)");
4237 module_param_named(fw_restart3945
, iwl3945_mod_params
.restart_fw
, int, 0444);
4238 MODULE_PARM_DESC(fw_restart3945
, "restart firmware in case of error");
4240 module_exit(iwl3945_exit
);
4241 module_init(iwl3945_init
);