drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h

   1 /******************************************************************************
   2  *
   3  * This file is provided under a dual BSD/GPLv2 license.  When using or
   4  * redistributing this file, you may do so under either license.
   5  *
   6  * GPL LICENSE SUMMARY
   7  *
   8  * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of version 2 of the GNU General Public License as
  12  * published by the Free Software Foundation.
  13  *
  14  * This program is distributed in the hope that it will be useful, but
  15  * WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  17  * General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
  22  * USA
  23  *
  24  * The full GNU General Public License is included in this distribution
  25  * in the file called COPYING.
  26  *
  27  * Contact Information:
  28  *  Intel Linux Wireless <ilw@linux.intel.com>
  29  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  30  *
  31  * BSD LICENSE
  32  *
  33  * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
  34  * All rights reserved.
  35  *
  36  * Redistribution and use in source and binary forms, with or without
  37  * modification, are permitted provided that the following conditions
  38  * are met:
  39  *
  40  *  * Redistributions of source code must retain the above copyright
  41  *    notice, this list of conditions and the following disclaimer.
  42  *  * Redistributions in binary form must reproduce the above copyright
  43  *    notice, this list of conditions and the following disclaimer in
  44  *    the documentation and/or other materials provided with the
  45  *    distribution.
  46  *  * Neither the name Intel Corporation nor the names of its
  47  *    contributors may be used to endorse or promote products derived
  48  *    from this software without specific prior written permission.
  49  *
  50  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  51  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  52  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  53  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  54  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  55  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  56  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  57  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  58  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  59  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  60  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  61  *****************************************************************************/
  62
  63 #ifndef __fw_api_tx_h__
  64 #define __fw_api_tx_h__
  65
  66 /**
  67  * enum iwl_tx_flags - bitmasks for tx_flags in TX command
  68  * @TX_CMD_FLG_PROT_REQUIRE: use RTS or CTS-to-self to protect the frame
  69  * @TX_CMD_FLG_WRITE_TX_POWER: update current tx power value in the mgmt frame
  70  * @TX_CMD_FLG_ACK: expect ACK from receiving station
  71  * @TX_CMD_FLG_STA_RATE: use RS table with initial index from the TX command.
  72  *      Otherwise, use rate_n_flags from the TX command
  73  * @TX_CMD_FLG_BAR: this frame is a BA request, immediate BAR is expected
  74  *      Must set TX_CMD_FLG_ACK with this flag.
  75  * @TX_CMD_FLG_VHT_NDPA: mark frame is NDPA for VHT beamformer sequence
  76  * @TX_CMD_FLG_HT_NDPA: mark frame is NDPA for HT beamformer sequence
  77  * @TX_CMD_FLG_CSI_FDBK2HOST: mark to send feedback to host (only if good CRC)
  78  * @TX_CMD_FLG_BT_PRIO_POS: the position of the BT priority (bit 11 is ignored
  79  *      on old firmwares).
  80  * @TX_CMD_FLG_BT_DIS: disable BT priority for this frame
  81  * @TX_CMD_FLG_SEQ_CTL: set if FW should override the sequence control.
  82  *      Should be set for mgmt, non-QOS data, mcast, bcast and in scan command
  83  * @TX_CMD_FLG_MORE_FRAG: this frame is non-last MPDU
  84  * @TX_CMD_FLG_TSF: FW should calculate and insert TSF in the frame
  85  *      Should be set for beacons and probe responses
  86  * @TX_CMD_FLG_CALIB: activate PA TX power calibrations
  87  * @TX_CMD_FLG_KEEP_SEQ_CTL: if seq_ctl is set, don't increase inner seq count
  88  * @TX_CMD_FLG_MH_PAD: driver inserted 2 byte padding after MAC header.
  89  *      Should be set for 26/30 length MAC headers
  90  * @TX_CMD_FLG_RESP_TO_DRV: zero this if the response should go only to FW
  91  * @TX_CMD_FLG_CCMP_AGG: this frame uses CCMP for aggregation acceleration
  92  * @TX_CMD_FLG_TKIP_MIC_DONE: FW already performed TKIP MIC calculation
  93  * @TX_CMD_FLG_DUR: disable duration overwriting used in PS-Poll Assoc-id
  94  * @TX_CMD_FLG_FW_DROP: FW should mark frame to be dropped
  95  * @TX_CMD_FLG_EXEC_PAPD: execute PAPD
  96  * @TX_CMD_FLG_PAPD_TYPE: 0 for reference power, 1 for nominal power
  97  * @TX_CMD_FLG_HCCA_CHUNK: mark start of TSPEC chunk
  98  */
  99 enum iwl_tx_flags {
 100         TX_CMD_FLG_PROT_REQUIRE         = BIT(0),
 101         TX_CMD_FLG_WRITE_TX_POWER       = BIT(1),
 102         TX_CMD_FLG_ACK                  = BIT(3),
 103         TX_CMD_FLG_STA_RATE             = BIT(4),
 104         TX_CMD_FLG_BAR                  = BIT(6),
 105         TX_CMD_FLG_TXOP_PROT            = BIT(7),
 106         TX_CMD_FLG_VHT_NDPA             = BIT(8),
 107         TX_CMD_FLG_HT_NDPA              = BIT(9),
 108         TX_CMD_FLG_CSI_FDBK2HOST        = BIT(10),
 109         TX_CMD_FLG_BT_PRIO_POS          = 11,
 110         TX_CMD_FLG_BT_DIS               = BIT(12),
 111         TX_CMD_FLG_SEQ_CTL              = BIT(13),
 112         TX_CMD_FLG_MORE_FRAG            = BIT(14),
 113         TX_CMD_FLG_TSF                  = BIT(16),
 114         TX_CMD_FLG_CALIB                = BIT(17),
 115         TX_CMD_FLG_KEEP_SEQ_CTL         = BIT(18),
 116         TX_CMD_FLG_MH_PAD               = BIT(20),
 117         TX_CMD_FLG_RESP_TO_DRV          = BIT(21),
 118         TX_CMD_FLG_CCMP_AGG             = BIT(22),
 119         TX_CMD_FLG_TKIP_MIC_DONE        = BIT(23),
 120         TX_CMD_FLG_DUR                  = BIT(25),
 121         TX_CMD_FLG_FW_DROP              = BIT(26),
 122         TX_CMD_FLG_EXEC_PAPD            = BIT(27),
 123         TX_CMD_FLG_PAPD_TYPE            = BIT(28),
 124         TX_CMD_FLG_HCCA_CHUNK           = BIT(31)
 125 }; /* TX_FLAGS_BITS_API_S_VER_1 */
 126
 127 /*
 128  * TX command security control
 129  */
 130 #define TX_CMD_SEC_WEP                  0x01
 131 #define TX_CMD_SEC_CCM                  0x02
 132 #define TX_CMD_SEC_TKIP                 0x03
 133 #define TX_CMD_SEC_EXT                  0x04
 134 #define TX_CMD_SEC_MSK                  0x07
 135 #define TX_CMD_SEC_WEP_KEY_IDX_POS      6
 136 #define TX_CMD_SEC_WEP_KEY_IDX_MSK      0xc0
 137 #define TX_CMD_SEC_KEY128               0x08
 138
 139 /* TODO: how does these values are OK with only 16 bit variable??? */
 140 /*
 141  * TX command next frame info
 142  *
 143  * bits 0:2 - security control (TX_CMD_SEC_*)
 144  * bit 3 - immediate ACK required
 145  * bit 4 - rate is taken from STA table
 146  * bit 5 - frame belongs to BA stream
 147  * bit 6 - immediate BA response expected
 148  * bit 7 - unused
 149  * bits 8:15 - Station ID
 150  * bits 16:31 - rate
 151  */
 152 #define TX_CMD_NEXT_FRAME_ACK_MSK               (0x8)
 153 #define TX_CMD_NEXT_FRAME_STA_RATE_MSK          (0x10)
 154 #define TX_CMD_NEXT_FRAME_BA_MSK                (0x20)
 155 #define TX_CMD_NEXT_FRAME_IMM_BA_RSP_MSK        (0x40)
 156 #define TX_CMD_NEXT_FRAME_FLAGS_MSK             (0xf8)
 157 #define TX_CMD_NEXT_FRAME_STA_ID_MSK            (0xff00)
 158 #define TX_CMD_NEXT_FRAME_STA_ID_POS            (8)
 159 #define TX_CMD_NEXT_FRAME_RATE_MSK              (0xffff0000)
 160 #define TX_CMD_NEXT_FRAME_RATE_POS              (16)
 161
 162 /*
 163  * TX command Frame life time in us - to be written in pm_frame_timeout
 164  */
 165 #define TX_CMD_LIFE_TIME_INFINITE       0xFFFFFFFF
 166 #define TX_CMD_LIFE_TIME_DEFAULT        2000000 /* 2000 ms*/
 167 #define TX_CMD_LIFE_TIME_PROBE_RESP     40000 /* 40 ms */
 168 #define TX_CMD_LIFE_TIME_EXPIRED_FRAME  0
 169
 170 /*
 171  * TID for non QoS frames - to be written in tid_tspec
 172  */
 173 #define IWL_TID_NON_QOS IWL_MAX_TID_COUNT
 174
 175 /*
 176  * Limits on the retransmissions - to be written in {data,rts}_retry_limit
 177  */
 178 #define IWL_DEFAULT_TX_RETRY                    15
 179 #define IWL_MGMT_DFAULT_RETRY_LIMIT             3
 180 #define IWL_RTS_DFAULT_RETRY_LIMIT              60
 181 #define IWL_BAR_DFAULT_RETRY_LIMIT              60
 182 #define IWL_LOW_RETRY_LIMIT                     7
 183
 184 /* TODO: complete documentation for try_cnt and btkill_cnt */
 185 /**
 186  * struct iwl_tx_cmd - TX command struct to FW
 187  * ( TX_CMD = 0x1c )
 188  * @len: in bytes of the payload, see below for details
 189  * @tx_flags: combination of TX_CMD_FLG_*
 190  * @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is
 191  *      cleared. Combination of RATE_MCS_*
 192  * @sta_id: index of destination station in FW station table
 193  * @sec_ctl: security control, TX_CMD_SEC_*
 194  * @initial_rate_index: index into the the rate table for initial TX attempt.
 195  *      Applied if TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames.
 196  * @key: security key
 197  * @next_frame_flags: TX_CMD_SEC_* and TX_CMD_NEXT_FRAME_*
 198  * @life_time: frame life time (usecs??)
 199  * @dram_lsb_ptr: Physical address of scratch area in the command (try_cnt +
 200  *      btkill_cnd + reserved), first 32 bits. "0" disables usage.
 201  * @dram_msb_ptr: upper bits of the scratch physical address
 202  * @rts_retry_limit: max attempts for RTS
 203  * @data_retry_limit: max attempts to send the data packet
 204  * @tid_spec: TID/tspec
 205  * @pm_frame_timeout: PM TX frame timeout
 206  *
 207  * The byte count (both len and next_frame_len) includes MAC header
 208  * (24/26/30/32 bytes)
 209  * + 2 bytes pad if 26/30 header size
 210  * + 8 byte IV for CCM or TKIP (not used for WEP)
 211  * + Data payload
 212  * + 8-byte MIC (not used for CCM/WEP)
 213  * It does not include post-MAC padding, i.e.,
 214  * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.
 215  * Range of len: 14-2342 bytes.
 216  *
 217  * After the struct fields the MAC header is placed, plus any padding,
 218  * and then the actial payload.
 219  */
 220 struct iwl_tx_cmd {
 221         __le16 len;
 222         __le16 next_frame_len;
 223         __le32 tx_flags;
 224         struct {
 225                 u8 try_cnt;
 226                 u8 btkill_cnt;
 227                 __le16 reserved;
 228         } scratch; /* DRAM_SCRATCH_API_U_VER_1 */
 229         __le32 rate_n_flags;
 230         u8 sta_id;
 231         u8 sec_ctl;
 232         u8 initial_rate_index;
 233         u8 reserved2;
 234         u8 key[16];
 235         __le32 reserved3;
 236         __le32 life_time;
 237         __le32 dram_lsb_ptr;
 238         u8 dram_msb_ptr;
 239         u8 rts_retry_limit;
 240         u8 data_retry_limit;
 241         u8 tid_tspec;
 242         __le16 pm_frame_timeout;
 243         __le16 reserved4;
 244         u8 payload[0];
 245         struct ieee80211_hdr hdr[0];
 246 } __packed; /* TX_CMD_API_S_VER_3 */
 247
 248 /*
 249  * TX response related data
 250  */
 251
 252 /*
 253  * enum iwl_tx_status - status that is returned by the fw after attempts to Tx
 254  * @TX_STATUS_SUCCESS:
 255  * @TX_STATUS_DIRECT_DONE:
 256  * @TX_STATUS_POSTPONE_DELAY:
 257  * @TX_STATUS_POSTPONE_FEW_BYTES:
 258  * @TX_STATUS_POSTPONE_BT_PRIO:
 259  * @TX_STATUS_POSTPONE_QUIET_PERIOD:
 260  * @TX_STATUS_POSTPONE_CALC_TTAK:
 261  * @TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY:
 262  * @TX_STATUS_FAIL_SHORT_LIMIT:
 263  * @TX_STATUS_FAIL_LONG_LIMIT:
 264  * @TX_STATUS_FAIL_UNDERRUN:
 265  * @TX_STATUS_FAIL_DRAIN_FLOW:
 266  * @TX_STATUS_FAIL_RFKILL_FLUSH:
 267  * @TX_STATUS_FAIL_LIFE_EXPIRE:
 268  * @TX_STATUS_FAIL_DEST_PS:
 269  * @TX_STATUS_FAIL_HOST_ABORTED:
 270  * @TX_STATUS_FAIL_BT_RETRY:
 271  * @TX_STATUS_FAIL_STA_INVALID:
 272  * @TX_TATUS_FAIL_FRAG_DROPPED:
 273  * @TX_STATUS_FAIL_TID_DISABLE:
 274  * @TX_STATUS_FAIL_FIFO_FLUSHED:
 275  * @TX_STATUS_FAIL_SMALL_CF_POLL:
 276  * @TX_STATUS_FAIL_FW_DROP:
 277  * @TX_STATUS_FAIL_STA_COLOR_MISMATCH: mismatch between color of Tx cmd and
 278  *      STA table
 279  * @TX_FRAME_STATUS_INTERNAL_ABORT:
 280  * @TX_MODE_MSK:
 281  * @TX_MODE_NO_BURST:
 282  * @TX_MODE_IN_BURST_SEQ:
 283  * @TX_MODE_FIRST_IN_BURST:
 284  * @TX_QUEUE_NUM_MSK:
 285  *
 286  * Valid only if frame_count =1
 287  * TODO: complete documentation
 288  */
 289 enum iwl_tx_status {
 290         TX_STATUS_MSK = 0x000000ff,
 291         TX_STATUS_SUCCESS = 0x01,
 292         TX_STATUS_DIRECT_DONE = 0x02,
 293         /* postpone TX */
 294         TX_STATUS_POSTPONE_DELAY = 0x40,
 295         TX_STATUS_POSTPONE_FEW_BYTES = 0x41,
 296         TX_STATUS_POSTPONE_BT_PRIO = 0x42,
 297         TX_STATUS_POSTPONE_QUIET_PERIOD = 0x43,
 298         TX_STATUS_POSTPONE_CALC_TTAK = 0x44,
 299         /* abort TX */
 300         TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY = 0x81,
 301         TX_STATUS_FAIL_SHORT_LIMIT = 0x82,
 302         TX_STATUS_FAIL_LONG_LIMIT = 0x83,
 303         TX_STATUS_FAIL_UNDERRUN = 0x84,
 304         TX_STATUS_FAIL_DRAIN_FLOW = 0x85,
 305         TX_STATUS_FAIL_RFKILL_FLUSH = 0x86,
 306         TX_STATUS_FAIL_LIFE_EXPIRE = 0x87,
 307         TX_STATUS_FAIL_DEST_PS = 0x88,
 308         TX_STATUS_FAIL_HOST_ABORTED = 0x89,
 309         TX_STATUS_FAIL_BT_RETRY = 0x8a,
 310         TX_STATUS_FAIL_STA_INVALID = 0x8b,
 311         TX_STATUS_FAIL_FRAG_DROPPED = 0x8c,
 312         TX_STATUS_FAIL_TID_DISABLE = 0x8d,
 313         TX_STATUS_FAIL_FIFO_FLUSHED = 0x8e,
 314         TX_STATUS_FAIL_SMALL_CF_POLL = 0x8f,
 315         TX_STATUS_FAIL_FW_DROP = 0x90,
 316         TX_STATUS_FAIL_STA_COLOR_MISMATCH = 0x91,
 317         TX_STATUS_INTERNAL_ABORT = 0x92,
 318         TX_MODE_MSK = 0x00000f00,
 319         TX_MODE_NO_BURST = 0x00000000,
 320         TX_MODE_IN_BURST_SEQ = 0x00000100,
 321         TX_MODE_FIRST_IN_BURST = 0x00000200,
 322         TX_QUEUE_NUM_MSK = 0x0001f000,
 323         TX_NARROW_BW_MSK = 0x00060000,
 324         TX_NARROW_BW_1DIV2 = 0x00020000,
 325         TX_NARROW_BW_1DIV4 = 0x00040000,
 326         TX_NARROW_BW_1DIV8 = 0x00060000,
 327 };
 328
 329 /*
 330  * enum iwl_tx_agg_status - TX aggregation status
 331  * @AGG_TX_STATE_STATUS_MSK:
 332  * @AGG_TX_STATE_TRANSMITTED:
 333  * @AGG_TX_STATE_UNDERRUN:
 334  * @AGG_TX_STATE_BT_PRIO:
 335  * @AGG_TX_STATE_FEW_BYTES:
 336  * @AGG_TX_STATE_ABORT:
 337  * @AGG_TX_STATE_LAST_SENT_TTL:
 338  * @AGG_TX_STATE_LAST_SENT_TRY_CNT:
 339  * @AGG_TX_STATE_LAST_SENT_BT_KILL:
 340  * @AGG_TX_STATE_SCD_QUERY:
 341  * @AGG_TX_STATE_TEST_BAD_CRC32:
 342  * @AGG_TX_STATE_RESPONSE:
 343  * @AGG_TX_STATE_DUMP_TX:
 344  * @AGG_TX_STATE_DELAY_TX:
 345  * @AGG_TX_STATE_TRY_CNT_MSK: Retry count for 1st frame in aggregation (retries
 346  *      occur if tx failed for this frame when it was a member of a previous
 347  *      aggregation block). If rate scaling is used, retry count indicates the
 348  *      rate table entry used for all frames in the new agg.
 349  *@ AGG_TX_STATE_SEQ_NUM_MSK: Command ID and sequence number of Tx command for
 350  *      this frame
 351  *
 352  * TODO: complete documentation
 353  */
 354 enum iwl_tx_agg_status {
 355         AGG_TX_STATE_STATUS_MSK = 0x00fff,
 356         AGG_TX_STATE_TRANSMITTED = 0x000,
 357         AGG_TX_STATE_UNDERRUN = 0x001,
 358         AGG_TX_STATE_BT_PRIO = 0x002,
 359         AGG_TX_STATE_FEW_BYTES = 0x004,
 360         AGG_TX_STATE_ABORT = 0x008,
 361         AGG_TX_STATE_LAST_SENT_TTL = 0x010,
 362         AGG_TX_STATE_LAST_SENT_TRY_CNT = 0x020,
 363         AGG_TX_STATE_LAST_SENT_BT_KILL = 0x040,
 364         AGG_TX_STATE_SCD_QUERY = 0x080,
 365         AGG_TX_STATE_TEST_BAD_CRC32 = 0x0100,
 366         AGG_TX_STATE_RESPONSE = 0x1ff,
 367         AGG_TX_STATE_DUMP_TX = 0x200,
 368         AGG_TX_STATE_DELAY_TX = 0x400,
 369         AGG_TX_STATE_TRY_CNT_POS = 12,
 370         AGG_TX_STATE_TRY_CNT_MSK = 0xf << AGG_TX_STATE_TRY_CNT_POS,
 371 };
 372
 373 #define AGG_TX_STATE_LAST_SENT_MSK  (AGG_TX_STATE_LAST_SENT_TTL| \
 374                                      AGG_TX_STATE_LAST_SENT_TRY_CNT| \
 375                                      AGG_TX_STATE_LAST_SENT_BT_KILL)
 376
 377 /*
 378  * The mask below describes a status where we are absolutely sure that the MPDU
 379  * wasn't sent. For BA/Underrun we cannot be that sure. All we know that we've
 380  * written the bytes to the TXE, but we know nothing about what the DSP did.
 381  */
 382 #define AGG_TX_STAT_FRAME_NOT_SENT (AGG_TX_STATE_FEW_BYTES | \
 383                                     AGG_TX_STATE_ABORT | \
 384                                     AGG_TX_STATE_SCD_QUERY)
 385
 386 /*
 387  * REPLY_TX = 0x1c (response)
 388  *
 389  * This response may be in one of two slightly different formats, indicated
 390  * by the frame_count field:
 391  *
 392  * 1)   No aggregation (frame_count == 1).  This reports Tx results for a single
 393  *      frame. Multiple attempts, at various bit rates, may have been made for
 394  *      this frame.
 395  *
 396  * 2)   Aggregation (frame_count > 1).  This reports Tx results for two or more
 397  *      frames that used block-acknowledge.  All frames were transmitted at
 398  *      same rate. Rate scaling may have been used if first frame in this new
 399  *      agg block failed in previous agg block(s).
 400  *
 401  *      Note that, for aggregation, ACK (block-ack) status is not delivered
 402  *      here; block-ack has not been received by the time the device records
 403  *      this status.
 404  *      This status relates to reasons the tx might have been blocked or aborted
 405  *      within the device, rather than whether it was received successfully by
 406  *      the destination station.
 407  */
 408
 409 /**
 410  * struct agg_tx_status - per packet TX aggregation status
 411  * @status: enum iwl_tx_agg_status
 412  * @sequence: Sequence # for this frame's Tx cmd (not SSN!)
 413  */
 414 struct agg_tx_status {
 415         __le16 status;
 416         __le16 sequence;
 417 } __packed;
 418
 419 /*
 420  * definitions for initial rate index field
 421  * bits [3:0] initial rate index
 422  * bits [6:4] rate table color, used for the initial rate
 423  * bit-7 invalid rate indication
 424  */
 425 #define TX_RES_INIT_RATE_INDEX_MSK 0x0f
 426 #define TX_RES_RATE_TABLE_COLOR_MSK 0x70
 427 #define TX_RES_INV_RATE_INDEX_MSK 0x80
 428
 429 #define IWL_MVM_TX_RES_GET_TID(_ra_tid) ((_ra_tid) & 0x0f)
 430 #define IWL_MVM_TX_RES_GET_RA(_ra_tid) ((_ra_tid) >> 4)
 431
 432 /**
 433  * struct iwl_mvm_tx_resp - notifies that fw is TXing a packet
 434  * ( REPLY_TX = 0x1c )
 435  * @frame_count: 1 no aggregation, >1 aggregation
 436  * @bt_kill_count: num of times blocked by bluetooth (unused for agg)
 437  * @failure_rts: num of failures due to unsuccessful RTS
 438  * @failure_frame: num failures due to no ACK (unused for agg)
 439  * @initial_rate: for non-agg: rate of the successful Tx. For agg: rate of the
 440  *      Tx of all the batch. RATE_MCS_*
 441  * @wireless_media_time: for non-agg: RTS + CTS + frame tx attempts time + ACK.
 442  *      for agg: RTS + CTS + aggregation tx time + block-ack time.
 443  *      in usec.
 444  * @pa_status: tx power info
 445  * @pa_integ_res_a: tx power info
 446  * @pa_integ_res_b: tx power info
 447  * @pa_integ_res_c: tx power info
 448  * @measurement_req_id: tx power info
 449  * @tfd_info: TFD information set by the FH
 450  * @seq_ctl: sequence control from the Tx cmd
 451  * @byte_cnt: byte count from the Tx cmd
 452  * @tlc_info: TLC rate info
 453  * @ra_tid: bits [3:0] = ra, bits [7:4] = tid
 454  * @frame_ctrl: frame control
 455  * @status: for non-agg:  frame status TX_STATUS_*
 456  *      for agg: status of 1st frame, AGG_TX_STATE_*; other frame status fields
 457  *      follow this one, up to frame_count.
 458  *
 459  * After the array of statuses comes the SSN of the SCD. Look at
 460  * %iwl_mvm_get_scd_ssn for more details.
 461  */
 462 struct iwl_mvm_tx_resp {
 463         u8 frame_count;
 464         u8 bt_kill_count;
 465         u8 failure_rts;
 466         u8 failure_frame;
 467         __le32 initial_rate;
 468         __le16 wireless_media_time;
 469
 470         u8 pa_status;
 471         u8 pa_integ_res_a[3];
 472         u8 pa_integ_res_b[3];
 473         u8 pa_integ_res_c[3];
 474         __le16 measurement_req_id;
 475         u8 reduced_tpc;
 476         u8 reserved;
 477
 478         __le32 tfd_info;
 479         __le16 seq_ctl;
 480         __le16 byte_cnt;
 481         u8 tlc_info;
 482         u8 ra_tid;
 483         __le16 frame_ctrl;
 484
 485         struct agg_tx_status status;
 486 } __packed; /* TX_RSP_API_S_VER_3 */
 487
 488 /**
 489  * struct iwl_mvm_ba_notif - notifies about reception of BA
 490  * ( BA_NOTIF = 0xc5 )
 491  * @sta_addr_lo32: lower 32 bits of the MAC address
 492  * @sta_addr_hi16: upper 16 bits of the MAC address
 493  * @sta_id: Index of recipient (BA-sending) station in fw's station table
 494  * @tid: tid of the session
 495  * @seq_ctl:
 496  * @bitmap: the bitmap of the BA notification as seen in the air
 497  * @scd_flow: the tx queue this BA relates to
 498  * @scd_ssn: the index of the last contiguously sent packet
 499  * @txed: number of Txed frames in this batch
 500  * @txed_2_done: number of Acked frames in this batch
 501  */
 502 struct iwl_mvm_ba_notif {
 503         __le32 sta_addr_lo32;
 504         __le16 sta_addr_hi16;
 505         __le16 reserved;
 506
 507         u8 sta_id;
 508         u8 tid;
 509         __le16 seq_ctl;
 510         __le64 bitmap;
 511         __le16 scd_flow;
 512         __le16 scd_ssn;
 513         u8 txed;
 514         u8 txed_2_done;
 515         __le16 reserved1;
 516 } __packed;
 517
 518 /*
 519  * struct iwl_mac_beacon_cmd - beacon template command
 520  * @tx: the tx commands associated with the beacon frame
 521  * @template_id: currently equal to the mac context id of the coresponding
 522  *  mac.
 523  * @tim_idx: the offset of the tim IE in the beacon
 524  * @tim_size: the length of the tim IE
 525  * @frame: the template of the beacon frame
 526  */
 527 struct iwl_mac_beacon_cmd {
 528         struct iwl_tx_cmd tx;
 529         __le32 template_id;
 530         __le32 tim_idx;
 531         __le32 tim_size;
 532         struct ieee80211_hdr frame[0];
 533 } __packed;
 534
 535 struct iwl_beacon_notif {
 536         struct iwl_mvm_tx_resp beacon_notify_hdr;
 537         __le64 tsf;
 538         __le32 ibss_mgr_status;
 539 } __packed;
 540
 541 /**
 542  * struct iwl_extended_beacon_notif - notifies about beacon transmission
 543  * @beacon_notify_hdr: tx response command associated with the beacon
 544  * @tsf: last beacon tsf
 545  * @ibss_mgr_status: whether IBSS is manager
 546  * @gp2: last beacon time in gp2
 547  */
 548 struct iwl_extended_beacon_notif {
 549         struct iwl_mvm_tx_resp beacon_notify_hdr;
 550         __le64 tsf;
 551         __le32 ibss_mgr_status;
 552         __le32 gp2;
 553 } __packed; /* BEACON_NTFY_API_S_VER_5 */
 554
 555 /**
 556  * enum iwl_dump_control - dump (flush) control flags
 557  * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the the FIFO is empty
 558  *      and the TFD queues are empty.
 559  */
 560 enum iwl_dump_control {
 561         DUMP_TX_FIFO_FLUSH      = BIT(1),
 562 };
 563
 564 /**
 565  * struct iwl_tx_path_flush_cmd -- queue/FIFO flush command
 566  * @queues_ctl: bitmap of queues to flush
 567  * @flush_ctl: control flags
 568  * @reserved: reserved
 569  */
 570 struct iwl_tx_path_flush_cmd {
 571         __le32 queues_ctl;
 572         __le16 flush_ctl;
 573         __le16 reserved;
 574 } __packed; /* TX_PATH_FLUSH_CMD_API_S_VER_1 */
 575
 576 /**
 577  * iwl_mvm_get_scd_ssn - returns the SSN of the SCD
 578  * @tx_resp: the Tx response from the fw (agg or non-agg)
 579  *
 580  * When the fw sends an AMPDU, it fetches the MPDUs one after the other. Since
 581  * it can't know that everything will go well until the end of the AMPDU, it
 582  * can't know in advance the number of MPDUs that will be sent in the current
 583  * batch. This is why it writes the agg Tx response while it fetches the MPDUs.
 584  * Hence, it can't know in advance what the SSN of the SCD will be at the end
 585  * of the batch. This is why the SSN of the SCD is written at the end of the
 586  * whole struct at a variable offset. This function knows how to cope with the
 587  * variable offset and returns the SSN of the SCD.
 588  */
 589 static inline u32 iwl_mvm_get_scd_ssn(struct iwl_mvm_tx_resp *tx_resp)
 590 {
 591         return le32_to_cpup((__le32 *)&tx_resp->status +
 592                             tx_resp->frame_count) & 0xfff;
 593 }
 594
 595 /**
 596  * struct iwl_scd_txq_cfg_cmd - New txq hw scheduler config command
 597  * @token:
 598  * @sta_id: station id
 599  * @tid:
 600  * @scd_queue: scheduler queue to confiug
 601  * @enable: 1 queue enable, 0 queue disable
 602  * @aggregate: 1 aggregated queue, 0 otherwise
 603  * @tx_fifo: %enum iwl_mvm_tx_fifo
 604  * @window: BA window size
 605  * @ssn: SSN for the BA agreement
 606  */
 607 struct iwl_scd_txq_cfg_cmd {
 608         u8 token;
 609         u8 sta_id;
 610         u8 tid;
 611         u8 scd_queue;
 612         u8 enable;
 613         u8 aggregate;
 614         u8 tx_fifo;
 615         u8 window;
 616         __le16 ssn;
 617         __le16 reserved;
 618 } __packed; /* SCD_QUEUE_CFG_CMD_API_S_VER_1 */
 619
 620 /**
 621  * struct iwl_scd_txq_cfg_rsp
 622  * @token: taken from the command
 623  * @sta_id: station id from the command
 624  * @tid: tid from the command
 625  * @scd_queue: scd_queue from the command
 626  */
 627 struct iwl_scd_txq_cfg_rsp {
 628         u8 token;
 629         u8 sta_id;
 630         u8 tid;
 631         u8 scd_queue;
 632 } __packed; /* SCD_QUEUE_CFG_RSP_API_S_VER_1 */
 633
 634 #endif /* __fw_api_tx_h__ */