1 /******************************************************************************
3 * This file is provided under a dual BSD/GPLv2 license. When using or
4 * redistributing this file, you may do so under either license.
8 * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
9 * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of version 2 of the GNU General Public License as
13 * published by the Free Software Foundation.
15 * This program is distributed in the hope that it will be useful, but
16 * WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
18 * General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
25 * The full GNU General Public License is included in this distribution
26 * in the file called COPYING.
28 * Contact Information:
29 * Intel Linux Wireless <ilw@linux.intel.com>
30 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
34 * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
35 * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
36 * All rights reserved.
38 * Redistribution and use in source and binary forms, with or without
39 * modification, are permitted provided that the following conditions
42 * * Redistributions of source code must retain the above copyright
43 * notice, this list of conditions and the following disclaimer.
44 * * Redistributions in binary form must reproduce the above copyright
45 * notice, this list of conditions and the following disclaimer in
46 * the documentation and/or other materials provided with the
48 * * Neither the name Intel Corporation nor the names of its
49 * contributors may be used to endorse or promote products derived
50 * from this software without specific prior written permission.
52 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
53 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
54 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
55 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
56 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
57 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
58 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
59 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
60 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
61 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
62 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
64 *****************************************************************************/
66 #include <linux/etherdevice.h>
67 #include <net/mac80211.h>
70 #include "fw-api-scan.h"
72 #define IWL_DENSE_EBS_SCAN_RATIO 5
73 #define IWL_SPARSE_EBS_SCAN_RATIO 1
75 struct iwl_mvm_scan_params
{
78 bool passive_fragmented
;
82 struct cfg80211_ssid
*ssids
;
83 struct ieee80211_channel
**channels
;
84 u16 interval
; /* interval between scans (in secs) */
91 struct iwl_scan_probe_req preq
;
92 struct cfg80211_match_set
*match_sets
;
97 } dwell
[IEEE80211_NUM_BANDS
];
100 u8 full_scan_mul
; /* not used for UMAC */
104 static int iwl_umac_scan_stop(struct iwl_mvm
*mvm
, int type
, bool notify
);
106 static u8
iwl_mvm_scan_rx_ant(struct iwl_mvm
*mvm
)
108 if (mvm
->scan_rx_ant
!= ANT_NONE
)
109 return mvm
->scan_rx_ant
;
110 return iwl_mvm_get_valid_rx_ant(mvm
);
113 static inline __le16
iwl_mvm_scan_rx_chain(struct iwl_mvm
*mvm
)
118 rx_ant
= iwl_mvm_scan_rx_ant(mvm
);
119 rx_chain
= rx_ant
<< PHY_RX_CHAIN_VALID_POS
;
120 rx_chain
|= rx_ant
<< PHY_RX_CHAIN_FORCE_MIMO_SEL_POS
;
121 rx_chain
|= rx_ant
<< PHY_RX_CHAIN_FORCE_SEL_POS
;
122 rx_chain
|= 0x1 << PHY_RX_CHAIN_DRIVER_FORCE_POS
;
123 return cpu_to_le16(rx_chain
);
126 static __le32
iwl_mvm_scan_rxon_flags(enum ieee80211_band band
)
128 if (band
== IEEE80211_BAND_2GHZ
)
129 return cpu_to_le32(PHY_BAND_24
);
131 return cpu_to_le32(PHY_BAND_5
);
135 iwl_mvm_scan_rate_n_flags(struct iwl_mvm
*mvm
, enum ieee80211_band band
,
140 mvm
->scan_last_antenna_idx
=
141 iwl_mvm_next_antenna(mvm
, iwl_mvm_get_valid_tx_ant(mvm
),
142 mvm
->scan_last_antenna_idx
);
143 tx_ant
= BIT(mvm
->scan_last_antenna_idx
) << RATE_MCS_ANT_POS
;
145 if (band
== IEEE80211_BAND_2GHZ
&& !no_cck
)
146 return cpu_to_le32(IWL_RATE_1M_PLCP
| RATE_MCS_CCK_MSK
|
149 return cpu_to_le32(IWL_RATE_6M_PLCP
| tx_ant
);
153 * If req->n_ssids > 0, it means we should do an active scan.
154 * In case of active scan w/o directed scan, we receive a zero-length SSID
155 * just to notify that this scan is active and not passive.
156 * In order to notify the FW of the number of SSIDs we wish to scan (including
157 * the zero-length one), we need to set the corresponding bits in chan->type,
158 * one for each SSID, and set the active bit (first). If the first SSID is
159 * already included in the probe template, so we need to set only
160 * req->n_ssids - 1 bits in addition to the first bit.
162 static u16
iwl_mvm_get_active_dwell(struct iwl_mvm
*mvm
,
163 enum ieee80211_band band
, int n_ssids
)
165 if (mvm
->fw
->ucode_capa
.api
[0] & IWL_UCODE_TLV_API_BASIC_DWELL
)
167 if (band
== IEEE80211_BAND_2GHZ
)
168 return 20 + 3 * (n_ssids
+ 1);
169 return 10 + 2 * (n_ssids
+ 1);
172 static u16
iwl_mvm_get_passive_dwell(struct iwl_mvm
*mvm
,
173 enum ieee80211_band band
)
175 if (mvm
->fw
->ucode_capa
.api
[0] & IWL_UCODE_TLV_API_BASIC_DWELL
)
177 return band
== IEEE80211_BAND_2GHZ
? 100 + 20 : 100 + 10;
180 static void iwl_mvm_scan_condition_iterator(void *data
, u8
*mac
,
181 struct ieee80211_vif
*vif
)
183 struct iwl_mvm_vif
*mvmvif
= iwl_mvm_vif_from_mac80211(vif
);
184 int *global_cnt
= data
;
186 if (vif
->type
!= NL80211_IFTYPE_P2P_DEVICE
&& mvmvif
->phy_ctxt
&&
187 mvmvif
->phy_ctxt
->id
< MAX_PHYS
)
191 static void iwl_mvm_scan_calc_dwell(struct iwl_mvm
*mvm
,
192 struct ieee80211_vif
*vif
,
193 struct iwl_mvm_scan_params
*params
)
196 enum ieee80211_band band
;
197 u8 frag_passive_dwell
= 0;
199 ieee80211_iterate_active_interfaces_atomic(mvm
->hw
,
200 IEEE80211_IFACE_ITER_NORMAL
,
201 iwl_mvm_scan_condition_iterator
,
206 params
->suspend_time
= 30;
207 params
->max_out_time
= 120;
209 if (iwl_mvm_low_latency(mvm
)) {
210 if (mvm
->fw
->ucode_capa
.api
[0] &
211 IWL_UCODE_TLV_API_FRAGMENTED_SCAN
) {
212 params
->suspend_time
= 105;
214 * If there is more than one active interface make
215 * passive scan more fragmented.
217 frag_passive_dwell
= 40;
218 params
->max_out_time
= frag_passive_dwell
;
220 params
->suspend_time
= 120;
221 params
->max_out_time
= 120;
225 if (frag_passive_dwell
&& (mvm
->fw
->ucode_capa
.api
[0] &
226 IWL_UCODE_TLV_API_FRAGMENTED_SCAN
)) {
228 * P2P device scan should not be fragmented to avoid negative
229 * impact on P2P device discovery. Configure max_out_time to be
230 * equal to dwell time on passive channel. Take a longest
231 * possible value, one that corresponds to 2GHz band
233 if (vif
->type
== NL80211_IFTYPE_P2P_DEVICE
) {
235 iwl_mvm_get_passive_dwell(mvm
,
236 IEEE80211_BAND_2GHZ
);
237 params
->max_out_time
= passive_dwell
;
239 params
->passive_fragmented
= true;
243 if ((params
->flags
& NL80211_SCAN_FLAG_LOW_PRIORITY
) &&
244 (params
->max_out_time
> 200))
245 params
->max_out_time
= 200;
249 for (band
= IEEE80211_BAND_2GHZ
; band
< IEEE80211_NUM_BANDS
; band
++) {
250 if (params
->passive_fragmented
)
251 params
->dwell
[band
].fragmented
= frag_passive_dwell
;
253 params
->dwell
[band
].passive
= iwl_mvm_get_passive_dwell(mvm
,
255 params
->dwell
[band
].active
=
256 iwl_mvm_get_active_dwell(mvm
, band
, params
->n_ssids
);
260 "scan parameters: max_out_time %d, suspend_time %d, passive_fragmented %d\n",
261 params
->max_out_time
, params
->suspend_time
,
262 params
->passive_fragmented
);
264 "dwell[IEEE80211_BAND_2GHZ]: passive %d, active %d, fragmented %d\n",
265 params
->dwell
[IEEE80211_BAND_2GHZ
].passive
,
266 params
->dwell
[IEEE80211_BAND_2GHZ
].active
,
267 params
->dwell
[IEEE80211_BAND_2GHZ
].fragmented
);
269 "dwell[IEEE80211_BAND_5GHZ]: passive %d, active %d, fragmented %d\n",
270 params
->dwell
[IEEE80211_BAND_5GHZ
].passive
,
271 params
->dwell
[IEEE80211_BAND_5GHZ
].active
,
272 params
->dwell
[IEEE80211_BAND_5GHZ
].fragmented
);
275 static inline bool iwl_mvm_rrm_scan_needed(struct iwl_mvm
*mvm
)
277 /* require rrm scan whenever the fw supports it */
278 return mvm
->fw
->ucode_capa
.capa
[0] &
279 IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT
;
282 static int iwl_mvm_max_scan_ie_fw_cmd_room(struct iwl_mvm
*mvm
)
286 max_probe_len
= SCAN_OFFLOAD_PROBE_REQ_SIZE
;
288 /* we create the 802.11 header and SSID element */
289 max_probe_len
-= 24 + 2;
291 /* DS parameter set element is added on 2.4GHZ band if required */
292 if (iwl_mvm_rrm_scan_needed(mvm
))
295 return max_probe_len
;
298 int iwl_mvm_max_scan_ie_len(struct iwl_mvm
*mvm
)
300 int max_ie_len
= iwl_mvm_max_scan_ie_fw_cmd_room(mvm
);
302 /* TODO: [BUG] This function should return the maximum allowed size of
303 * scan IEs, however the LMAC scan api contains both 2GHZ and 5GHZ IEs
304 * in the same command. So the correct implementation of this function
305 * is just iwl_mvm_max_scan_ie_fw_cmd_room() / 2. Currently the scan
306 * command has only 512 bytes and it would leave us with about 240
307 * bytes for scan IEs, which is clearly not enough. So meanwhile
308 * we will report an incorrect value. This may result in a failure to
309 * issue a scan in unified_scan_lmac and unified_sched_scan_lmac
310 * functions with -ENOBUFS, if a large enough probe will be provided.
315 static u8
*iwl_mvm_dump_channel_list(struct iwl_scan_results_notif
*res
,
316 int num_res
, u8
*buf
, size_t buf_size
)
319 u8
*pos
= buf
, *end
= buf
+ buf_size
;
321 for (i
= 0; pos
< end
&& i
< num_res
; i
++)
322 pos
+= snprintf(pos
, end
- pos
, " %u", res
[i
].channel
);
324 /* terminate the string in case the buffer was too short */
325 *(buf
+ buf_size
- 1) = '\0';
330 int iwl_mvm_rx_scan_offload_iter_complete_notif(struct iwl_mvm
*mvm
,
331 struct iwl_rx_cmd_buffer
*rxb
,
332 struct iwl_device_cmd
*cmd
)
334 struct iwl_rx_packet
*pkt
= rxb_addr(rxb
);
335 struct iwl_lmac_scan_complete_notif
*notif
= (void *)pkt
->data
;
339 "Scan offload iteration complete: status=0x%x scanned channels=%d channels list: %s\n",
340 notif
->status
, notif
->scanned_channels
,
341 iwl_mvm_dump_channel_list(notif
->results
,
342 notif
->scanned_channels
, buf
,
347 int iwl_mvm_rx_scan_offload_results(struct iwl_mvm
*mvm
,
348 struct iwl_rx_cmd_buffer
*rxb
,
349 struct iwl_device_cmd
*cmd
)
351 IWL_DEBUG_SCAN(mvm
, "Scheduled scan results\n");
352 ieee80211_sched_scan_results(mvm
->hw
);
357 int iwl_mvm_rx_scan_offload_complete_notif(struct iwl_mvm
*mvm
,
358 struct iwl_rx_cmd_buffer
*rxb
,
359 struct iwl_device_cmd
*cmd
)
361 struct iwl_rx_packet
*pkt
= rxb_addr(rxb
);
362 struct iwl_periodic_scan_complete
*scan_notif
= (void *)pkt
->data
;
363 bool aborted
= (scan_notif
->status
== IWL_SCAN_OFFLOAD_ABORTED
);
364 bool ebs_successful
= (scan_notif
->ebs_status
== IWL_SCAN_EBS_SUCCESS
);
366 /* scan status must be locked for proper checking */
367 lockdep_assert_held(&mvm
->mutex
);
369 /* We first check if we were stopping a scan, in which case we
370 * just clear the stopping flag. Then we check if it was a
371 * firmware initiated stop, in which case we need to inform
373 * Note that we can have a stopping and a running scan
374 * simultaneously, but we can't have two different types of
375 * scans stopping or running at the same time (since LMAC
376 * doesn't support it).
379 if (mvm
->scan_status
& IWL_MVM_SCAN_STOPPING_SCHED
) {
380 WARN_ON_ONCE(mvm
->scan_status
& IWL_MVM_SCAN_STOPPING_REGULAR
);
382 IWL_DEBUG_SCAN(mvm
, "Scheduled scan %s, EBS status %s\n",
383 aborted
? "aborted" : "completed",
384 ebs_successful
? "successful" : "failed");
386 mvm
->scan_status
&= ~IWL_MVM_SCAN_STOPPING_SCHED
;
387 } else if (mvm
->scan_status
& IWL_MVM_SCAN_STOPPING_REGULAR
) {
388 IWL_DEBUG_SCAN(mvm
, "Regular scan %s, EBS status %s\n",
389 aborted
? "aborted" : "completed",
390 ebs_successful
? "successful" : "failed");
392 mvm
->scan_status
&= ~IWL_MVM_SCAN_STOPPING_REGULAR
;
393 } else if (mvm
->scan_status
& IWL_MVM_SCAN_SCHED
) {
394 WARN_ON_ONCE(mvm
->scan_status
& IWL_MVM_SCAN_REGULAR
);
396 IWL_DEBUG_SCAN(mvm
, "Scheduled scan %s, EBS status %s (FW)\n",
397 aborted
? "aborted" : "completed",
398 ebs_successful
? "successful" : "failed");
400 mvm
->scan_status
&= ~IWL_MVM_SCAN_SCHED
;
401 ieee80211_sched_scan_stopped(mvm
->hw
);
402 } else if (mvm
->scan_status
& IWL_MVM_SCAN_REGULAR
) {
403 IWL_DEBUG_SCAN(mvm
, "Regular scan %s, EBS status %s (FW)\n",
404 aborted
? "aborted" : "completed",
405 ebs_successful
? "successful" : "failed");
407 mvm
->scan_status
&= ~IWL_MVM_SCAN_REGULAR
;
408 ieee80211_scan_completed(mvm
->hw
,
409 scan_notif
->status
== IWL_SCAN_OFFLOAD_ABORTED
);
410 iwl_mvm_unref(mvm
, IWL_MVM_REF_SCAN
);
413 mvm
->last_ebs_successful
= ebs_successful
;
418 static int iwl_ssid_exist(u8
*ssid
, u8 ssid_len
, struct iwl_ssid_ie
*ssid_list
)
422 for (i
= 0; i
< PROBE_OPTION_MAX
; i
++) {
423 if (!ssid_list
[i
].len
)
425 if (ssid_list
[i
].len
== ssid_len
&&
426 !memcmp(ssid_list
->ssid
, ssid
, ssid_len
))
432 /* We insert the SSIDs in an inverted order, because the FW will
435 static void iwl_scan_build_ssids(struct iwl_mvm_scan_params
*params
,
436 struct iwl_ssid_ie
*ssids
,
443 * copy SSIDs from match list.
444 * iwl_config_sched_scan_profiles() uses the order of these ssids to
447 for (i
= 0, j
= params
->n_match_sets
- 1;
448 j
>= 0 && i
< PROBE_OPTION_MAX
;
450 /* skip empty SSID matchsets */
451 if (!params
->match_sets
[j
].ssid
.ssid_len
)
453 ssids
[i
].id
= WLAN_EID_SSID
;
454 ssids
[i
].len
= params
->match_sets
[j
].ssid
.ssid_len
;
455 memcpy(ssids
[i
].ssid
, params
->match_sets
[j
].ssid
.ssid
,
459 /* add SSIDs from scan SSID list */
461 for (j
= params
->n_ssids
- 1;
462 j
>= 0 && i
< PROBE_OPTION_MAX
;
464 index
= iwl_ssid_exist(params
->ssids
[j
].ssid
,
465 params
->ssids
[j
].ssid_len
,
468 ssids
[i
].id
= WLAN_EID_SSID
;
469 ssids
[i
].len
= params
->ssids
[j
].ssid_len
;
470 memcpy(ssids
[i
].ssid
, params
->ssids
[j
].ssid
,
472 *ssid_bitmap
|= BIT(i
);
474 *ssid_bitmap
|= BIT(index
);
480 iwl_mvm_config_sched_scan_profiles(struct iwl_mvm
*mvm
,
481 struct cfg80211_sched_scan_request
*req
)
483 struct iwl_scan_offload_profile
*profile
;
484 struct iwl_scan_offload_profile_cfg
*profile_cfg
;
485 struct iwl_scan_offload_blacklist
*blacklist
;
486 struct iwl_host_cmd cmd
= {
487 .id
= SCAN_OFFLOAD_UPDATE_PROFILES_CMD
,
488 .len
[1] = sizeof(*profile_cfg
),
489 .dataflags
[0] = IWL_HCMD_DFL_NOCOPY
,
490 .dataflags
[1] = IWL_HCMD_DFL_NOCOPY
,
496 if (WARN_ON(req
->n_match_sets
> IWL_SCAN_MAX_PROFILES
))
499 if (mvm
->fw
->ucode_capa
.flags
& IWL_UCODE_TLV_FLAGS_SHORT_BL
)
500 blacklist_len
= IWL_SCAN_SHORT_BLACKLIST_LEN
;
502 blacklist_len
= IWL_SCAN_MAX_BLACKLIST_LEN
;
504 blacklist
= kzalloc(sizeof(*blacklist
) * blacklist_len
, GFP_KERNEL
);
508 profile_cfg
= kzalloc(sizeof(*profile_cfg
), GFP_KERNEL
);
514 cmd
.data
[0] = blacklist
;
515 cmd
.len
[0] = sizeof(*blacklist
) * blacklist_len
;
516 cmd
.data
[1] = profile_cfg
;
518 /* No blacklist configuration */
520 profile_cfg
->num_profiles
= req
->n_match_sets
;
521 profile_cfg
->active_clients
= SCAN_CLIENT_SCHED_SCAN
;
522 profile_cfg
->pass_match
= SCAN_CLIENT_SCHED_SCAN
;
523 profile_cfg
->match_notify
= SCAN_CLIENT_SCHED_SCAN
;
524 if (!req
->n_match_sets
|| !req
->match_sets
[0].ssid
.ssid_len
)
525 profile_cfg
->any_beacon_notify
= SCAN_CLIENT_SCHED_SCAN
;
527 for (i
= 0; i
< req
->n_match_sets
; i
++) {
528 profile
= &profile_cfg
->profiles
[i
];
529 profile
->ssid_index
= i
;
530 /* Support any cipher and auth algorithm */
531 profile
->unicast_cipher
= 0xff;
532 profile
->auth_alg
= 0xff;
533 profile
->network_type
= IWL_NETWORK_TYPE_ANY
;
534 profile
->band_selection
= IWL_SCAN_OFFLOAD_SELECT_ANY
;
535 profile
->client_bitmap
= SCAN_CLIENT_SCHED_SCAN
;
538 IWL_DEBUG_SCAN(mvm
, "Sending scheduled scan profile config\n");
540 ret
= iwl_mvm_send_cmd(mvm
, &cmd
);
548 static bool iwl_mvm_scan_pass_all(struct iwl_mvm
*mvm
,
549 struct cfg80211_sched_scan_request
*req
)
551 if (req
->n_match_sets
&& req
->match_sets
[0].ssid
.ssid_len
) {
553 "Sending scheduled scan with filtering, n_match_sets %d\n",
558 IWL_DEBUG_SCAN(mvm
, "Sending Scheduled scan without filtering\n");
562 static int iwl_mvm_send_scan_offload_abort(struct iwl_mvm
*mvm
)
565 struct iwl_host_cmd cmd
= {
566 .id
= SCAN_OFFLOAD_ABORT_CMD
,
570 ret
= iwl_mvm_send_cmd_status(mvm
, &cmd
, &status
);
574 if (status
!= CAN_ABORT_STATUS
) {
576 * The scan abort will return 1 for success or
577 * 2 for "failure". A failure condition can be
578 * due to simply not being in an active scan which
579 * can occur if we send the scan abort before the
580 * microcode has notified us that a scan is completed.
582 IWL_DEBUG_SCAN(mvm
, "SCAN OFFLOAD ABORT ret %d.\n", status
);
589 static int iwl_mvm_lmac_scan_stop(struct iwl_mvm
*mvm
, int type
)
592 struct iwl_notification_wait wait_scan_done
;
593 static const u8 scan_done_notif
[] = { SCAN_OFFLOAD_COMPLETE
, };
594 bool sched
= type
& IWL_MVM_SCAN_SCHED
;
596 lockdep_assert_held(&mvm
->mutex
);
598 iwl_init_notification_wait(&mvm
->notif_wait
, &wait_scan_done
,
600 ARRAY_SIZE(scan_done_notif
),
603 ret
= iwl_mvm_send_scan_offload_abort(mvm
);
605 IWL_DEBUG_SCAN(mvm
, "Send stop %sscan failed %d\n",
606 sched
? "offloaded " : "", ret
);
607 iwl_remove_notification(&mvm
->notif_wait
, &wait_scan_done
);
611 IWL_DEBUG_SCAN(mvm
, "Successfully sent stop %sscan\n",
612 sched
? "scheduled " : "");
614 ret
= iwl_wait_notification(&mvm
->notif_wait
, &wait_scan_done
, 1 * HZ
);
619 static void iwl_mvm_scan_fill_tx_cmd(struct iwl_mvm
*mvm
,
620 struct iwl_scan_req_tx_cmd
*tx_cmd
,
623 tx_cmd
[0].tx_flags
= cpu_to_le32(TX_CMD_FLG_SEQ_CTL
|
625 tx_cmd
[0].rate_n_flags
= iwl_mvm_scan_rate_n_flags(mvm
,
628 tx_cmd
[0].sta_id
= mvm
->aux_sta
.sta_id
;
630 tx_cmd
[1].tx_flags
= cpu_to_le32(TX_CMD_FLG_SEQ_CTL
|
632 tx_cmd
[1].rate_n_flags
= iwl_mvm_scan_rate_n_flags(mvm
,
635 tx_cmd
[1].sta_id
= mvm
->aux_sta
.sta_id
;
639 iwl_mvm_lmac_scan_cfg_channels(struct iwl_mvm
*mvm
,
640 struct ieee80211_channel
**channels
,
641 int n_channels
, u32 ssid_bitmap
,
642 struct iwl_scan_req_lmac
*cmd
)
644 struct iwl_scan_channel_cfg_lmac
*channel_cfg
= (void *)&cmd
->data
;
647 for (i
= 0; i
< n_channels
; i
++) {
648 channel_cfg
[i
].channel_num
=
649 cpu_to_le16(channels
[i
]->hw_value
);
650 channel_cfg
[i
].iter_count
= cpu_to_le16(1);
651 channel_cfg
[i
].iter_interval
= 0;
652 channel_cfg
[i
].flags
=
653 cpu_to_le32(IWL_UNIFIED_SCAN_CHANNEL_PARTIAL
|
658 static u8
*iwl_mvm_copy_and_insert_ds_elem(struct iwl_mvm
*mvm
, const u8
*ies
,
659 size_t len
, u8
*const pos
)
661 static const u8 before_ds_params
[] = {
665 WLAN_EID_EXT_SUPP_RATES
,
670 if (!iwl_mvm_rrm_scan_needed(mvm
)) {
671 memcpy(newpos
, ies
, len
);
675 offs
= ieee80211_ie_split(ies
, len
,
677 ARRAY_SIZE(before_ds_params
),
680 memcpy(newpos
, ies
, offs
);
683 /* Add a placeholder for DS Parameter Set element */
684 *newpos
++ = WLAN_EID_DS_PARAMS
;
688 memcpy(newpos
, ies
+ offs
, len
- offs
);
689 newpos
+= len
- offs
;
695 iwl_mvm_build_scan_probe(struct iwl_mvm
*mvm
, struct ieee80211_vif
*vif
,
696 struct ieee80211_scan_ies
*ies
,
697 struct iwl_mvm_scan_params
*params
)
699 struct ieee80211_mgmt
*frame
= (void *)params
->preq
.buf
;
701 const u8
*mac_addr
= params
->flags
& NL80211_SCAN_FLAG_RANDOM_ADDR
?
702 params
->mac_addr
: NULL
;
705 * Unfortunately, right now the offload scan doesn't support randomising
706 * within the firmware, so until the firmware API is ready we implement
707 * it in the driver. This means that the scan iterations won't really be
708 * random, only when it's restarted, but at least that helps a bit.
711 get_random_mask_addr(frame
->sa
, mac_addr
,
712 params
->mac_addr_mask
);
714 memcpy(frame
->sa
, vif
->addr
, ETH_ALEN
);
716 frame
->frame_control
= cpu_to_le16(IEEE80211_STYPE_PROBE_REQ
);
717 eth_broadcast_addr(frame
->da
);
718 eth_broadcast_addr(frame
->bssid
);
721 pos
= frame
->u
.probe_req
.variable
;
722 *pos
++ = WLAN_EID_SSID
;
725 params
->preq
.mac_header
.offset
= 0;
726 params
->preq
.mac_header
.len
= cpu_to_le16(24 + 2);
728 /* Insert ds parameter set element on 2.4 GHz band */
729 newpos
= iwl_mvm_copy_and_insert_ds_elem(mvm
,
730 ies
->ies
[IEEE80211_BAND_2GHZ
],
731 ies
->len
[IEEE80211_BAND_2GHZ
],
733 params
->preq
.band_data
[0].offset
= cpu_to_le16(pos
- params
->preq
.buf
);
734 params
->preq
.band_data
[0].len
= cpu_to_le16(newpos
- pos
);
737 memcpy(pos
, ies
->ies
[IEEE80211_BAND_5GHZ
],
738 ies
->len
[IEEE80211_BAND_5GHZ
]);
739 params
->preq
.band_data
[1].offset
= cpu_to_le16(pos
- params
->preq
.buf
);
740 params
->preq
.band_data
[1].len
=
741 cpu_to_le16(ies
->len
[IEEE80211_BAND_5GHZ
]);
742 pos
+= ies
->len
[IEEE80211_BAND_5GHZ
];
744 memcpy(pos
, ies
->common_ies
, ies
->common_ie_len
);
745 params
->preq
.common_data
.offset
= cpu_to_le16(pos
- params
->preq
.buf
);
746 params
->preq
.common_data
.len
= cpu_to_le16(ies
->common_ie_len
);
749 static void iwl_mvm_scan_lmac_dwell(struct iwl_mvm
*mvm
,
750 struct iwl_scan_req_lmac
*cmd
,
751 struct iwl_mvm_scan_params
*params
)
753 cmd
->active_dwell
= params
->dwell
[IEEE80211_BAND_2GHZ
].active
;
754 cmd
->passive_dwell
= params
->dwell
[IEEE80211_BAND_2GHZ
].passive
;
755 if (params
->passive_fragmented
)
756 cmd
->fragmented_dwell
=
757 params
->dwell
[IEEE80211_BAND_2GHZ
].fragmented
;
758 cmd
->max_out_time
= cpu_to_le32(params
->max_out_time
);
759 cmd
->suspend_time
= cpu_to_le32(params
->suspend_time
);
760 cmd
->scan_prio
= cpu_to_le32(IWL_SCAN_PRIORITY_HIGH
);
763 static inline bool iwl_mvm_scan_fits(struct iwl_mvm
*mvm
, int n_ssids
,
764 struct ieee80211_scan_ies
*ies
,
767 return ((n_ssids
<= PROBE_OPTION_MAX
) &&
768 (n_channels
<= mvm
->fw
->ucode_capa
.n_scan_channels
) &
769 (ies
->common_ie_len
+
770 ies
->len
[NL80211_BAND_2GHZ
] +
771 ies
->len
[NL80211_BAND_5GHZ
] <=
772 iwl_mvm_max_scan_ie_fw_cmd_room(mvm
)));
775 static inline bool iwl_mvm_scan_use_ebs(struct iwl_mvm
*mvm
, int n_iterations
)
777 const struct iwl_ucode_capabilities
*capa
= &mvm
->fw
->ucode_capa
;
779 /* We can only use EBS if:
780 * 1. the feature is supported;
781 * 2. the last EBS was successful;
782 * 3. if only single scan, the single scan EBS API is supported.
784 return ((capa
->flags
& IWL_UCODE_TLV_FLAGS_EBS_SUPPORT
) &&
785 mvm
->last_ebs_successful
&&
787 (capa
->api
[0] & IWL_UCODE_TLV_API_SINGLE_SCAN_EBS
)));
790 static int iwl_mvm_scan_total_iterations(struct iwl_mvm_scan_params
*params
)
792 return params
->schedule
[0].iterations
+ params
->schedule
[1].iterations
;
795 static int iwl_mvm_scan_lmac_flags(struct iwl_mvm
*mvm
,
796 struct iwl_mvm_scan_params
*params
)
800 if (params
->n_ssids
== 0)
801 flags
|= IWL_MVM_LMAC_SCAN_FLAG_PASSIVE
;
803 if (params
->n_ssids
== 1 && params
->ssids
[0].ssid_len
!= 0)
804 flags
|= IWL_MVM_LMAC_SCAN_FLAG_PRE_CONNECTION
;
806 if (params
->passive_fragmented
)
807 flags
|= IWL_MVM_LMAC_SCAN_FLAG_FRAGMENTED
;
809 if (iwl_mvm_rrm_scan_needed(mvm
))
810 flags
|= IWL_MVM_LMAC_SCAN_FLAGS_RRM_ENABLED
;
812 if (params
->pass_all
)
813 flags
|= IWL_MVM_LMAC_SCAN_FLAG_PASS_ALL
;
815 flags
|= IWL_MVM_LMAC_SCAN_FLAG_MATCH
;
817 #ifdef CONFIG_IWLWIFI_DEBUGFS
818 if (mvm
->scan_iter_notif_enabled
)
819 flags
|= IWL_MVM_LMAC_SCAN_FLAG_ITER_COMPLETE
;
825 static int iwl_mvm_scan_lmac(struct iwl_mvm
*mvm
, struct ieee80211_vif
*vif
,
826 struct iwl_mvm_scan_params
*params
)
828 struct iwl_scan_req_lmac
*cmd
= mvm
->scan_cmd
;
829 struct iwl_scan_probe_req
*preq
=
830 (void *)(cmd
->data
+ sizeof(struct iwl_scan_channel_cfg_lmac
) *
831 mvm
->fw
->ucode_capa
.n_scan_channels
);
833 int n_iterations
= iwl_mvm_scan_total_iterations(params
);
835 lockdep_assert_held(&mvm
->mutex
);
837 memset(cmd
, 0, ksize(cmd
));
839 iwl_mvm_scan_lmac_dwell(mvm
, cmd
, params
);
841 cmd
->rx_chain_select
= iwl_mvm_scan_rx_chain(mvm
);
842 cmd
->iter_num
= cpu_to_le32(1);
843 cmd
->n_channels
= (u8
)params
->n_channels
;
845 cmd
->delay
= cpu_to_le32(params
->delay
);
847 cmd
->scan_flags
= cpu_to_le32(iwl_mvm_scan_lmac_flags(mvm
, params
));
849 cmd
->flags
= iwl_mvm_scan_rxon_flags(params
->channels
[0]->band
);
850 cmd
->filter_flags
= cpu_to_le32(MAC_FILTER_ACCEPT_GRP
|
851 MAC_FILTER_IN_BEACON
);
852 iwl_mvm_scan_fill_tx_cmd(mvm
, cmd
->tx_cmd
, params
->no_cck
);
853 iwl_scan_build_ssids(params
, cmd
->direct_scan
, &ssid_bitmap
);
855 /* this API uses bits 1-20 instead of 0-19 */
858 cmd
->schedule
[0].delay
= cpu_to_le16(params
->interval
);
859 cmd
->schedule
[0].iterations
= params
->schedule
[0].iterations
;
860 cmd
->schedule
[0].full_scan_mul
= params
->schedule
[0].full_scan_mul
;
861 cmd
->schedule
[1].delay
= cpu_to_le16(params
->interval
);
862 cmd
->schedule
[1].iterations
= params
->schedule
[1].iterations
;
863 cmd
->schedule
[1].full_scan_mul
= params
->schedule
[1].iterations
;
865 if (iwl_mvm_scan_use_ebs(mvm
, n_iterations
)) {
866 cmd
->channel_opt
[0].flags
=
867 cpu_to_le16(IWL_SCAN_CHANNEL_FLAG_EBS
|
868 IWL_SCAN_CHANNEL_FLAG_EBS_ACCURATE
|
869 IWL_SCAN_CHANNEL_FLAG_CACHE_ADD
);
870 cmd
->channel_opt
[0].non_ebs_ratio
=
871 cpu_to_le16(IWL_DENSE_EBS_SCAN_RATIO
);
872 cmd
->channel_opt
[1].flags
=
873 cpu_to_le16(IWL_SCAN_CHANNEL_FLAG_EBS
|
874 IWL_SCAN_CHANNEL_FLAG_EBS_ACCURATE
|
875 IWL_SCAN_CHANNEL_FLAG_CACHE_ADD
);
876 cmd
->channel_opt
[1].non_ebs_ratio
=
877 cpu_to_le16(IWL_SPARSE_EBS_SCAN_RATIO
);
880 iwl_mvm_lmac_scan_cfg_channels(mvm
, params
->channels
,
881 params
->n_channels
, ssid_bitmap
, cmd
);
883 *preq
= params
->preq
;
888 int iwl_mvm_reg_scan_stop(struct iwl_mvm
*mvm
)
892 if (mvm
->fw
->ucode_capa
.capa
[0] & IWL_UCODE_TLV_CAPA_UMAC_SCAN
)
893 return iwl_umac_scan_stop(mvm
, IWL_MVM_SCAN_REGULAR
, true);
895 if (!(mvm
->scan_status
& IWL_MVM_SCAN_REGULAR
))
898 if (iwl_mvm_is_radio_killed(mvm
)) {
903 ret
= iwl_mvm_lmac_scan_stop(mvm
, IWL_MVM_SCAN_REGULAR
);
905 mvm
->scan_status
|= IWL_MVM_SCAN_STOPPING_REGULAR
;
907 /* Clear the scan status so the next scan requests will
908 * succeed and mark the scan as stopping, so that the Rx
909 * handler doesn't do anything, as the scan was stopped from
910 * above. Since the rx handler won't do anything now, we have
911 * to release the scan reference here.
913 iwl_mvm_unref(mvm
, IWL_MVM_REF_SCAN
);
915 mvm
->scan_status
&= ~IWL_MVM_SCAN_REGULAR
;
916 ieee80211_scan_completed(mvm
->hw
, true);
921 int iwl_mvm_sched_scan_stop(struct iwl_mvm
*mvm
, bool notify
)
925 if (mvm
->fw
->ucode_capa
.capa
[0] & IWL_UCODE_TLV_CAPA_UMAC_SCAN
)
926 return iwl_umac_scan_stop(mvm
, IWL_MVM_SCAN_SCHED
, notify
);
928 if (!(mvm
->scan_status
& IWL_MVM_SCAN_SCHED
))
931 if (iwl_mvm_is_radio_killed(mvm
)) {
936 ret
= iwl_mvm_lmac_scan_stop(mvm
, IWL_MVM_SCAN_SCHED
);
938 mvm
->scan_status
|= IWL_MVM_SCAN_STOPPING_SCHED
;
940 mvm
->scan_status
&= ~IWL_MVM_SCAN_SCHED
;
942 ieee80211_sched_scan_stopped(mvm
->hw
);
949 struct iwl_umac_scan_done
{
954 static int rate_to_scan_rate_flag(unsigned int rate
)
956 static const int rate_to_scan_rate
[IWL_RATE_COUNT
] = {
957 [IWL_RATE_1M_INDEX
] = SCAN_CONFIG_RATE_1M
,
958 [IWL_RATE_2M_INDEX
] = SCAN_CONFIG_RATE_2M
,
959 [IWL_RATE_5M_INDEX
] = SCAN_CONFIG_RATE_5M
,
960 [IWL_RATE_11M_INDEX
] = SCAN_CONFIG_RATE_11M
,
961 [IWL_RATE_6M_INDEX
] = SCAN_CONFIG_RATE_6M
,
962 [IWL_RATE_9M_INDEX
] = SCAN_CONFIG_RATE_9M
,
963 [IWL_RATE_12M_INDEX
] = SCAN_CONFIG_RATE_12M
,
964 [IWL_RATE_18M_INDEX
] = SCAN_CONFIG_RATE_18M
,
965 [IWL_RATE_24M_INDEX
] = SCAN_CONFIG_RATE_24M
,
966 [IWL_RATE_36M_INDEX
] = SCAN_CONFIG_RATE_36M
,
967 [IWL_RATE_48M_INDEX
] = SCAN_CONFIG_RATE_48M
,
968 [IWL_RATE_54M_INDEX
] = SCAN_CONFIG_RATE_54M
,
971 return rate_to_scan_rate
[rate
];
974 static __le32
iwl_mvm_scan_config_rates(struct iwl_mvm
*mvm
)
976 struct ieee80211_supported_band
*band
;
977 unsigned int rates
= 0;
980 band
= &mvm
->nvm_data
->bands
[IEEE80211_BAND_2GHZ
];
981 for (i
= 0; i
< band
->n_bitrates
; i
++)
982 rates
|= rate_to_scan_rate_flag(band
->bitrates
[i
].hw_value
);
983 band
= &mvm
->nvm_data
->bands
[IEEE80211_BAND_5GHZ
];
984 for (i
= 0; i
< band
->n_bitrates
; i
++)
985 rates
|= rate_to_scan_rate_flag(band
->bitrates
[i
].hw_value
);
987 /* Set both basic rates and supported rates */
988 rates
|= SCAN_CONFIG_SUPPORTED_RATE(rates
);
990 return cpu_to_le32(rates
);
993 int iwl_mvm_config_scan(struct iwl_mvm
*mvm
)
996 struct iwl_scan_config
*scan_config
;
997 struct ieee80211_supported_band
*band
;
999 mvm
->nvm_data
->bands
[IEEE80211_BAND_2GHZ
].n_channels
+
1000 mvm
->nvm_data
->bands
[IEEE80211_BAND_5GHZ
].n_channels
;
1001 int ret
, i
, j
= 0, cmd_size
, data_size
;
1002 struct iwl_host_cmd cmd
= {
1006 if (WARN_ON(num_channels
> mvm
->fw
->ucode_capa
.n_scan_channels
))
1009 cmd_size
= sizeof(*scan_config
) + mvm
->fw
->ucode_capa
.n_scan_channels
;
1011 scan_config
= kzalloc(cmd_size
, GFP_KERNEL
);
1015 data_size
= cmd_size
- sizeof(struct iwl_mvm_umac_cmd_hdr
);
1016 scan_config
->hdr
.size
= cpu_to_le16(data_size
);
1017 scan_config
->flags
= cpu_to_le32(SCAN_CONFIG_FLAG_ACTIVATE
|
1018 SCAN_CONFIG_FLAG_ALLOW_CHUB_REQS
|
1019 SCAN_CONFIG_FLAG_SET_TX_CHAINS
|
1020 SCAN_CONFIG_FLAG_SET_RX_CHAINS
|
1021 SCAN_CONFIG_FLAG_SET_ALL_TIMES
|
1022 SCAN_CONFIG_FLAG_SET_LEGACY_RATES
|
1023 SCAN_CONFIG_FLAG_SET_MAC_ADDR
|
1024 SCAN_CONFIG_FLAG_SET_CHANNEL_FLAGS
|
1025 SCAN_CONFIG_N_CHANNELS(num_channels
));
1026 scan_config
->tx_chains
= cpu_to_le32(iwl_mvm_get_valid_tx_ant(mvm
));
1027 scan_config
->rx_chains
= cpu_to_le32(iwl_mvm_scan_rx_ant(mvm
));
1028 scan_config
->legacy_rates
= iwl_mvm_scan_config_rates(mvm
);
1029 scan_config
->out_of_channel_time
= cpu_to_le32(170);
1030 scan_config
->suspend_time
= cpu_to_le32(30);
1031 scan_config
->dwell_active
= 20;
1032 scan_config
->dwell_passive
= 110;
1033 scan_config
->dwell_fragmented
= 20;
1035 memcpy(&scan_config
->mac_addr
, &mvm
->addresses
[0].addr
, ETH_ALEN
);
1037 scan_config
->bcast_sta_id
= mvm
->aux_sta
.sta_id
;
1038 scan_config
->channel_flags
= IWL_CHANNEL_FLAG_EBS
|
1039 IWL_CHANNEL_FLAG_ACCURATE_EBS
|
1040 IWL_CHANNEL_FLAG_EBS_ADD
|
1041 IWL_CHANNEL_FLAG_PRE_SCAN_PASSIVE2ACTIVE
;
1043 band
= &mvm
->nvm_data
->bands
[IEEE80211_BAND_2GHZ
];
1044 for (i
= 0; i
< band
->n_channels
; i
++, j
++)
1045 scan_config
->channel_array
[j
] = band
->channels
[i
].hw_value
;
1046 band
= &mvm
->nvm_data
->bands
[IEEE80211_BAND_5GHZ
];
1047 for (i
= 0; i
< band
->n_channels
; i
++, j
++)
1048 scan_config
->channel_array
[j
] = band
->channels
[i
].hw_value
;
1050 cmd
.data
[0] = scan_config
;
1051 cmd
.len
[0] = cmd_size
;
1052 cmd
.dataflags
[0] = IWL_HCMD_DFL_NOCOPY
;
1054 IWL_DEBUG_SCAN(mvm
, "Sending UMAC scan config\n");
1056 ret
= iwl_mvm_send_cmd(mvm
, &cmd
);
1062 static int iwl_mvm_find_scan_uid(struct iwl_mvm
*mvm
, u32 uid
)
1066 for (i
= 0; i
< mvm
->max_scans
; i
++)
1067 if (mvm
->scan_uid
[i
] == uid
)
1073 static int iwl_mvm_find_free_scan_uid(struct iwl_mvm
*mvm
)
1075 return iwl_mvm_find_scan_uid(mvm
, 0);
1078 static bool iwl_mvm_find_scan_type(struct iwl_mvm
*mvm
, int type
)
1082 for (i
= 0; i
< mvm
->max_scans
; i
++)
1083 if (mvm
->scan_uid
[i
] & type
)
1089 static int iwl_mvm_find_first_scan(struct iwl_mvm
*mvm
, int type
)
1093 for (i
= 0; i
< mvm
->max_scans
; i
++)
1094 if (mvm
->scan_uid
[i
] & type
)
1100 static u32
iwl_generate_scan_uid(struct iwl_mvm
*mvm
, int type
)
1104 /* make sure exactly one bit is on in scan type */
1105 WARN_ON(hweight8(type
) != 1);
1108 * Make sure scan uids are unique. If one scan lasts long time while
1109 * others are completing frequently, the seq number will wrap up and
1110 * we may have more than one scan with the same uid.
1113 uid
= type
| (mvm
->scan_seq_num
<<
1114 IWL_UMAC_SCAN_UID_SEQ_OFFSET
);
1115 mvm
->scan_seq_num
++;
1116 } while (iwl_mvm_find_scan_uid(mvm
, uid
) < mvm
->max_scans
);
1118 IWL_DEBUG_SCAN(mvm
, "Generated scan UID %u\n", uid
);
1123 static void iwl_mvm_scan_umac_dwell(struct iwl_mvm
*mvm
,
1124 struct iwl_scan_req_umac
*cmd
,
1125 struct iwl_mvm_scan_params
*params
)
1127 cmd
->active_dwell
= params
->dwell
[IEEE80211_BAND_2GHZ
].active
;
1128 cmd
->passive_dwell
= params
->dwell
[IEEE80211_BAND_2GHZ
].passive
;
1129 if (params
->passive_fragmented
)
1130 cmd
->fragmented_dwell
=
1131 params
->dwell
[IEEE80211_BAND_2GHZ
].fragmented
;
1132 cmd
->max_out_time
= cpu_to_le32(params
->max_out_time
);
1133 cmd
->suspend_time
= cpu_to_le32(params
->suspend_time
);
1134 cmd
->scan_priority
= cpu_to_le32(IWL_SCAN_PRIORITY_HIGH
);
1136 if (iwl_mvm_scan_total_iterations(params
) == 0)
1137 cmd
->ooc_priority
= cpu_to_le32(IWL_SCAN_PRIORITY_HIGH
);
1139 cmd
->ooc_priority
= cpu_to_le32(IWL_SCAN_PRIORITY_LOW
);
1143 iwl_mvm_umac_scan_cfg_channels(struct iwl_mvm
*mvm
,
1144 struct ieee80211_channel
**channels
,
1145 int n_channels
, u32 ssid_bitmap
,
1146 struct iwl_scan_req_umac
*cmd
)
1148 struct iwl_scan_channel_cfg_umac
*channel_cfg
= (void *)&cmd
->data
;
1151 for (i
= 0; i
< n_channels
; i
++) {
1152 channel_cfg
[i
].flags
= cpu_to_le32(ssid_bitmap
);
1153 channel_cfg
[i
].channel_num
= channels
[i
]->hw_value
;
1154 channel_cfg
[i
].iter_count
= 1;
1155 channel_cfg
[i
].iter_interval
= 0;
1159 static u32
iwl_mvm_scan_umac_flags(struct iwl_mvm
*mvm
,
1160 struct iwl_mvm_scan_params
*params
)
1164 if (params
->n_ssids
== 0)
1165 flags
= IWL_UMAC_SCAN_GEN_FLAGS_PASSIVE
;
1167 if (params
->n_ssids
== 1 && params
->ssids
[0].ssid_len
!= 0)
1168 flags
|= IWL_UMAC_SCAN_GEN_FLAGS_PRE_CONNECT
;
1170 if (params
->passive_fragmented
)
1171 flags
|= IWL_UMAC_SCAN_GEN_FLAGS_FRAGMENTED
;
1173 if (iwl_mvm_rrm_scan_needed(mvm
))
1174 flags
|= IWL_UMAC_SCAN_GEN_FLAGS_RRM_ENABLED
;
1176 if (params
->pass_all
)
1177 flags
|= IWL_UMAC_SCAN_GEN_FLAGS_PASS_ALL
;
1179 flags
|= IWL_UMAC_SCAN_GEN_FLAGS_MATCH
;
1181 if (iwl_mvm_scan_total_iterations(params
) > 1)
1182 flags
|= IWL_UMAC_SCAN_GEN_FLAGS_PERIODIC
;
1184 #ifdef CONFIG_IWLWIFI_DEBUGFS
1185 if (mvm
->scan_iter_notif_enabled
)
1186 flags
|= IWL_UMAC_SCAN_GEN_FLAGS_ITER_COMPLETE
;
1191 static int iwl_mvm_scan_umac(struct iwl_mvm
*mvm
, struct ieee80211_vif
*vif
,
1192 struct iwl_mvm_scan_params
*params
)
1194 struct iwl_scan_req_umac
*cmd
= mvm
->scan_cmd
;
1195 struct iwl_scan_req_umac_tail
*sec_part
= (void *)&cmd
->data
+
1196 sizeof(struct iwl_scan_channel_cfg_umac
) *
1197 mvm
->fw
->ucode_capa
.n_scan_channels
;
1199 u32 ssid_bitmap
= 0;
1200 int n_iterations
= iwl_mvm_scan_total_iterations(params
);
1203 lockdep_assert_held(&mvm
->mutex
);
1205 uid_idx
= iwl_mvm_find_free_scan_uid(mvm
);
1206 if (uid_idx
>= mvm
->max_scans
)
1209 memset(cmd
, 0, ksize(cmd
));
1210 cmd
->hdr
.size
= cpu_to_le16(iwl_mvm_scan_size(mvm
) -
1211 sizeof(struct iwl_mvm_umac_cmd_hdr
));
1213 iwl_mvm_scan_umac_dwell(mvm
, cmd
, params
);
1215 if (n_iterations
== 1)
1216 uid
= iwl_generate_scan_uid(mvm
, IWL_MVM_SCAN_REGULAR
);
1218 uid
= iwl_generate_scan_uid(mvm
, IWL_MVM_SCAN_SCHED
);
1220 mvm
->scan_uid
[uid_idx
] = uid
;
1221 cmd
->uid
= cpu_to_le32(uid
);
1223 cmd
->general_flags
= cpu_to_le32(iwl_mvm_scan_umac_flags(mvm
, params
));
1225 if (iwl_mvm_scan_use_ebs(mvm
, n_iterations
))
1226 cmd
->channel_flags
= IWL_SCAN_CHANNEL_FLAG_EBS
|
1227 IWL_SCAN_CHANNEL_FLAG_EBS_ACCURATE
|
1228 IWL_SCAN_CHANNEL_FLAG_CACHE_ADD
;
1230 cmd
->n_channels
= params
->n_channels
;
1232 iwl_scan_build_ssids(params
, sec_part
->direct_scan
, &ssid_bitmap
);
1234 iwl_mvm_umac_scan_cfg_channels(mvm
, params
->channels
,
1235 params
->n_channels
, ssid_bitmap
, cmd
);
1237 /* With UMAC we use only one schedule for now, so use the sum
1238 * of the iterations (with a a maximum of 255).
1240 sec_part
->schedule
[0].iter_count
=
1241 (n_iterations
> 255) ? 255 : n_iterations
;
1242 sec_part
->schedule
[0].interval
= cpu_to_le16(params
->interval
);
1244 sec_part
->delay
= cpu_to_le16(params
->delay
);
1245 sec_part
->preq
= params
->preq
;
1250 static int iwl_mvm_num_scans(struct iwl_mvm
*mvm
)
1252 return hweight32(mvm
->scan_status
& IWL_MVM_SCAN_MASK
);
1255 static int iwl_mvm_check_running_scans(struct iwl_mvm
*mvm
, int type
)
1257 /* This looks a bit arbitrary, but the idea is that if we run
1258 * out of possible simultaneous scans and the userspace is
1259 * trying to run a scan type that is already running, we
1260 * return -EBUSY. But if the userspace wants to start a
1261 * different type of scan, we stop the opposite type to make
1262 * space for the new request. The reason is backwards
1263 * compatibility with old wpa_supplicant that wouldn't stop a
1264 * scheduled scan before starting a normal scan.
1267 if (iwl_mvm_num_scans(mvm
) < mvm
->max_scans
)
1270 /* Use a switch, even though this is a bitmask, so that more
1271 * than one bits set will fall in default and we will warn.
1274 case IWL_MVM_SCAN_REGULAR
:
1275 if (mvm
->scan_status
& IWL_MVM_SCAN_REGULAR_MASK
)
1277 return iwl_mvm_sched_scan_stop(mvm
, true);
1278 case IWL_MVM_SCAN_SCHED
:
1279 if (mvm
->scan_status
& IWL_MVM_SCAN_SCHED_MASK
)
1281 return iwl_mvm_reg_scan_stop(mvm
);
1282 case IWL_MVM_SCAN_NETDETECT
:
1283 /* No need to stop anything for net-detect since the
1284 * firmware is restarted anyway. This way, any sched
1285 * scans that were running will be restarted when we
1297 int iwl_mvm_reg_scan_start(struct iwl_mvm
*mvm
, struct ieee80211_vif
*vif
,
1298 struct cfg80211_scan_request
*req
,
1299 struct ieee80211_scan_ies
*ies
)
1301 struct iwl_host_cmd hcmd
= {
1302 .len
= { iwl_mvm_scan_size(mvm
), },
1303 .data
= { mvm
->scan_cmd
, },
1304 .dataflags
= { IWL_HCMD_DFL_NOCOPY
, },
1306 struct iwl_mvm_scan_params params
= {};
1309 lockdep_assert_held(&mvm
->mutex
);
1311 if (iwl_mvm_is_lar_supported(mvm
) && !mvm
->lar_regdom_set
) {
1312 IWL_ERR(mvm
, "scan while LAR regdomain is not set\n");
1316 ret
= iwl_mvm_check_running_scans(mvm
, IWL_MVM_SCAN_REGULAR
);
1320 iwl_mvm_ref(mvm
, IWL_MVM_REF_SCAN
);
1322 /* we should have failed registration if scan_cmd was NULL */
1323 if (WARN_ON(!mvm
->scan_cmd
))
1326 if (!iwl_mvm_scan_fits(mvm
, req
->n_ssids
, ies
, req
->n_channels
))
1329 params
.n_ssids
= req
->n_ssids
;
1330 params
.flags
= req
->flags
;
1331 params
.n_channels
= req
->n_channels
;
1333 params
.interval
= 0;
1334 params
.ssids
= req
->ssids
;
1335 params
.channels
= req
->channels
;
1336 params
.mac_addr
= req
->mac_addr
;
1337 params
.mac_addr_mask
= req
->mac_addr_mask
;
1338 params
.no_cck
= req
->no_cck
;
1339 params
.pass_all
= true;
1340 params
.n_match_sets
= 0;
1341 params
.match_sets
= NULL
;
1343 params
.schedule
[0].iterations
= 1;
1344 params
.schedule
[0].full_scan_mul
= 0;
1345 params
.schedule
[1].iterations
= 0;
1346 params
.schedule
[1].full_scan_mul
= 0;
1348 iwl_mvm_scan_calc_dwell(mvm
, vif
, ¶ms
);
1350 iwl_mvm_build_scan_probe(mvm
, vif
, ies
, ¶ms
);
1352 if (mvm
->fw
->ucode_capa
.capa
[0] & IWL_UCODE_TLV_CAPA_UMAC_SCAN
) {
1353 hcmd
.id
= SCAN_REQ_UMAC
;
1354 ret
= iwl_mvm_scan_umac(mvm
, vif
, ¶ms
);
1356 hcmd
.id
= SCAN_OFFLOAD_REQUEST_CMD
;
1357 ret
= iwl_mvm_scan_lmac(mvm
, vif
, ¶ms
);
1363 ret
= iwl_mvm_send_cmd(mvm
, &hcmd
);
1365 IWL_DEBUG_SCAN(mvm
, "Scan request was sent successfully\n");
1366 mvm
->scan_status
|= IWL_MVM_SCAN_REGULAR
;
1368 /* If the scan failed, it usually means that the FW was unable
1369 * to allocate the time events. Warn on it, but maybe we
1370 * should try to send the command again with different params.
1372 IWL_ERR(mvm
, "Scan failed! ret %d\n", ret
);
1376 iwl_mvm_unref(mvm
, IWL_MVM_REF_SCAN
);
1381 int iwl_mvm_sched_scan_start(struct iwl_mvm
*mvm
,
1382 struct ieee80211_vif
*vif
,
1383 struct cfg80211_sched_scan_request
*req
,
1384 struct ieee80211_scan_ies
*ies
,
1387 struct iwl_host_cmd hcmd
= {
1388 .len
= { iwl_mvm_scan_size(mvm
), },
1389 .data
= { mvm
->scan_cmd
, },
1390 .dataflags
= { IWL_HCMD_DFL_NOCOPY
, },
1392 struct iwl_mvm_scan_params params
= {};
1395 lockdep_assert_held(&mvm
->mutex
);
1397 if (iwl_mvm_is_lar_supported(mvm
) && !mvm
->lar_regdom_set
) {
1398 IWL_ERR(mvm
, "sched-scan while LAR regdomain is not set\n");
1402 ret
= iwl_mvm_check_running_scans(mvm
, type
);
1406 /* we should have failed registration if scan_cmd was NULL */
1407 if (WARN_ON(!mvm
->scan_cmd
))
1410 if (!iwl_mvm_scan_fits(mvm
, req
->n_ssids
, ies
, req
->n_channels
))
1413 params
.n_ssids
= req
->n_ssids
;
1414 params
.flags
= req
->flags
;
1415 params
.n_channels
= req
->n_channels
;
1416 params
.ssids
= req
->ssids
;
1417 params
.channels
= req
->channels
;
1418 params
.mac_addr
= req
->mac_addr
;
1419 params
.mac_addr_mask
= req
->mac_addr_mask
;
1420 params
.no_cck
= false;
1421 params
.pass_all
= iwl_mvm_scan_pass_all(mvm
, req
);
1422 params
.n_match_sets
= req
->n_match_sets
;
1423 params
.match_sets
= req
->match_sets
;
1425 params
.schedule
[0].iterations
= IWL_FAST_SCHED_SCAN_ITERATIONS
;
1426 params
.schedule
[0].full_scan_mul
= 1;
1427 params
.schedule
[1].iterations
= 0xff;
1428 params
.schedule
[1].full_scan_mul
= IWL_FULL_SCAN_MULTIPLIER
;
1430 if (req
->interval
> U16_MAX
) {
1432 "interval value is > 16-bits, set to max possible\n");
1433 params
.interval
= U16_MAX
;
1435 params
.interval
= req
->interval
/ MSEC_PER_SEC
;
1438 /* In theory, LMAC scans can handle a 32-bit delay, but since
1439 * waiting for over 18 hours to start the scan is a bit silly
1440 * and to keep it aligned with UMAC scans (which only support
1441 * 16-bit delays), trim it down to 16-bits.
1443 if (req
->delay
> U16_MAX
) {
1445 "delay value is > 16-bits, set to max possible\n");
1446 params
.delay
= U16_MAX
;
1448 params
.delay
= req
->delay
;
1451 iwl_mvm_scan_calc_dwell(mvm
, vif
, ¶ms
);
1453 ret
= iwl_mvm_config_sched_scan_profiles(mvm
, req
);
1457 iwl_mvm_build_scan_probe(mvm
, vif
, ies
, ¶ms
);
1459 if (mvm
->fw
->ucode_capa
.capa
[0] & IWL_UCODE_TLV_CAPA_UMAC_SCAN
) {
1460 hcmd
.id
= SCAN_REQ_UMAC
;
1461 ret
= iwl_mvm_scan_umac(mvm
, vif
, ¶ms
);
1463 hcmd
.id
= SCAN_OFFLOAD_REQUEST_CMD
;
1464 ret
= iwl_mvm_scan_lmac(mvm
, vif
, ¶ms
);
1470 ret
= iwl_mvm_send_cmd(mvm
, &hcmd
);
1473 "Sched scan request was sent successfully\n");
1474 mvm
->scan_status
|= type
;
1476 /* If the scan failed, it usually means that the FW was unable
1477 * to allocate the time events. Warn on it, but maybe we
1478 * should try to send the command again with different params.
1480 IWL_ERR(mvm
, "Sched scan failed! ret %d\n", ret
);
1486 int iwl_mvm_rx_umac_scan_complete_notif(struct iwl_mvm
*mvm
,
1487 struct iwl_rx_cmd_buffer
*rxb
,
1488 struct iwl_device_cmd
*cmd
)
1490 struct iwl_rx_packet
*pkt
= rxb_addr(rxb
);
1491 struct iwl_umac_scan_complete
*notif
= (void *)pkt
->data
;
1492 u32 uid
= __le32_to_cpu(notif
->uid
);
1493 bool sched
= !!(uid
& IWL_MVM_SCAN_SCHED
);
1494 int uid_idx
= iwl_mvm_find_scan_uid(mvm
, uid
);
1497 * Scan uid may be set to zero in case of scan abort request from above.
1499 if (uid_idx
>= mvm
->max_scans
)
1503 "Scan completed, uid %u type %s, status %s, EBS status %s\n",
1504 uid
, sched
? "sched" : "regular",
1505 notif
->status
== IWL_SCAN_OFFLOAD_COMPLETED
?
1506 "completed" : "aborted",
1507 notif
->ebs_status
== IWL_SCAN_EBS_SUCCESS
?
1508 "success" : "failed");
1510 if (notif
->ebs_status
)
1511 mvm
->last_ebs_successful
= false;
1513 mvm
->scan_uid
[uid_idx
] = 0;
1516 ieee80211_scan_completed(mvm
->hw
,
1518 IWL_SCAN_OFFLOAD_ABORTED
);
1519 iwl_mvm_unref(mvm
, IWL_MVM_REF_SCAN
);
1520 } else if (!iwl_mvm_find_scan_type(mvm
, IWL_MVM_SCAN_SCHED
)) {
1521 ieee80211_sched_scan_stopped(mvm
->hw
);
1523 IWL_DEBUG_SCAN(mvm
, "Another sched scan is running\n");
1529 int iwl_mvm_rx_umac_scan_iter_complete_notif(struct iwl_mvm
*mvm
,
1530 struct iwl_rx_cmd_buffer
*rxb
,
1531 struct iwl_device_cmd
*cmd
)
1533 struct iwl_rx_packet
*pkt
= rxb_addr(rxb
);
1534 struct iwl_umac_scan_iter_complete_notif
*notif
= (void *)pkt
->data
;
1538 "UMAC Scan iteration complete: status=0x%x scanned_channels=%d channels list: %s\n",
1539 notif
->status
, notif
->scanned_channels
,
1540 iwl_mvm_dump_channel_list(notif
->results
,
1541 notif
->scanned_channels
, buf
,
1546 static bool iwl_scan_umac_done_check(struct iwl_notif_wait_data
*notif_wait
,
1547 struct iwl_rx_packet
*pkt
, void *data
)
1549 struct iwl_umac_scan_done
*scan_done
= data
;
1550 struct iwl_umac_scan_complete
*notif
= (void *)pkt
->data
;
1551 u32 uid
= __le32_to_cpu(notif
->uid
);
1552 int uid_idx
= iwl_mvm_find_scan_uid(scan_done
->mvm
, uid
);
1554 if (WARN_ON(pkt
->hdr
.cmd
!= SCAN_COMPLETE_UMAC
))
1557 if (uid_idx
>= scan_done
->mvm
->max_scans
)
1561 * Clear scan uid of scans that was aborted from above and completed
1562 * in FW so the RX handler does nothing. Set last_ebs_successful here if
1565 scan_done
->mvm
->scan_uid
[uid_idx
] = 0;
1567 if (notif
->ebs_status
)
1568 scan_done
->mvm
->last_ebs_successful
= false;
1570 return !iwl_mvm_find_scan_type(scan_done
->mvm
, scan_done
->type
);
1573 static int iwl_umac_scan_abort_one(struct iwl_mvm
*mvm
, u32 uid
)
1575 struct iwl_umac_scan_abort cmd
= {
1576 .hdr
.size
= cpu_to_le16(sizeof(struct iwl_umac_scan_abort
) -
1577 sizeof(struct iwl_mvm_umac_cmd_hdr
)),
1578 .uid
= cpu_to_le32(uid
),
1581 lockdep_assert_held(&mvm
->mutex
);
1583 IWL_DEBUG_SCAN(mvm
, "Sending scan abort, uid %u\n", uid
);
1585 return iwl_mvm_send_cmd_pdu(mvm
, SCAN_ABORT_UMAC
, 0, sizeof(cmd
), &cmd
);
1588 static int iwl_umac_scan_stop(struct iwl_mvm
*mvm
, int type
, bool notify
)
1590 struct iwl_notification_wait wait_scan_done
;
1591 static const u8 scan_done_notif
[] = { SCAN_COMPLETE_UMAC
, };
1592 struct iwl_umac_scan_done scan_done
= {
1598 iwl_init_notification_wait(&mvm
->notif_wait
, &wait_scan_done
,
1600 ARRAY_SIZE(scan_done_notif
),
1601 iwl_scan_umac_done_check
, &scan_done
);
1603 IWL_DEBUG_SCAN(mvm
, "Preparing to stop scan, type %x\n", type
);
1605 for (i
= 0; i
< mvm
->max_scans
; i
++) {
1606 if (mvm
->scan_uid
[i
] & type
) {
1609 if (iwl_mvm_is_radio_killed(mvm
) &&
1610 (type
& IWL_MVM_SCAN_REGULAR
)) {
1611 ieee80211_scan_completed(mvm
->hw
, true);
1612 iwl_mvm_unref(mvm
, IWL_MVM_REF_SCAN
);
1616 err
= iwl_umac_scan_abort_one(mvm
, mvm
->scan_uid
[i
]);
1623 IWL_DEBUG_SCAN(mvm
, "Couldn't stop scan\n");
1624 iwl_remove_notification(&mvm
->notif_wait
, &wait_scan_done
);
1628 ret
= iwl_wait_notification(&mvm
->notif_wait
, &wait_scan_done
, 1 * HZ
);
1633 if (type
& IWL_MVM_SCAN_SCHED
)
1634 ieee80211_sched_scan_stopped(mvm
->hw
);
1635 if (type
& IWL_MVM_SCAN_REGULAR
) {
1636 ieee80211_scan_completed(mvm
->hw
, true);
1637 iwl_mvm_unref(mvm
, IWL_MVM_REF_SCAN
);
1644 int iwl_mvm_scan_size(struct iwl_mvm
*mvm
)
1646 if (mvm
->fw
->ucode_capa
.capa
[0] & IWL_UCODE_TLV_CAPA_UMAC_SCAN
)
1647 return sizeof(struct iwl_scan_req_umac
) +
1648 sizeof(struct iwl_scan_channel_cfg_umac
) *
1649 mvm
->fw
->ucode_capa
.n_scan_channels
+
1650 sizeof(struct iwl_scan_req_umac_tail
);
1652 return sizeof(struct iwl_scan_req_lmac
) +
1653 sizeof(struct iwl_scan_channel_cfg_lmac
) *
1654 mvm
->fw
->ucode_capa
.n_scan_channels
+
1655 sizeof(struct iwl_scan_probe_req
);
1659 * This function is used in nic restart flow, to inform mac80211 about scans
1660 * that was aborted by restart flow or by an assert.
1662 void iwl_mvm_report_scan_aborted(struct iwl_mvm
*mvm
)
1664 if (mvm
->fw
->ucode_capa
.capa
[0] & IWL_UCODE_TLV_CAPA_UMAC_SCAN
) {
1667 uid
= iwl_mvm_find_first_scan(mvm
, IWL_MVM_SCAN_REGULAR
);
1668 if (uid
< mvm
->max_scans
) {
1669 ieee80211_scan_completed(mvm
->hw
, true);
1670 mvm
->scan_uid
[uid
] = 0;
1672 uid
= iwl_mvm_find_first_scan(mvm
, IWL_MVM_SCAN_SCHED
);
1673 if (uid
< mvm
->max_scans
&& !mvm
->restart_fw
) {
1674 ieee80211_sched_scan_stopped(mvm
->hw
);
1675 mvm
->scan_uid
[uid
] = 0;
1678 /* We shouldn't have any UIDs still set. Loop over all the
1679 * UIDs to make sure there's nothing left there and warn if
1682 for (i
= 0; i
< mvm
->max_scans
; i
++) {
1683 if (WARN_ONCE(mvm
->scan_uid
[i
],
1684 "UMAC scan UID %d was not cleaned\n",
1686 mvm
->scan_uid
[i
] = 0;
1689 if (mvm
->scan_status
& IWL_MVM_SCAN_REGULAR
)
1690 ieee80211_scan_completed(mvm
->hw
, true);
1692 /* Sched scan will be restarted by mac80211 in
1693 * restart_hw, so do not report if FW is about to be
1696 if ((mvm
->scan_status
& IWL_MVM_SCAN_SCHED
) && !mvm
->restart_fw
)
1697 ieee80211_sched_scan_stopped(mvm
->hw
);