projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
[deliverable/linux.git] / drivers / net / wireless / libertas / if_sdio.c
1 /*
2 * linux/drivers/net/wireless/libertas/if_sdio.c
3 *
4 * Copyright 2007-2008 Pierre Ossman
5 *
6 * Inspired by if_cs.c, Copyright 2007 Holger Schurig
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or (at
11 * your option) any later version.
12 *
13 * This hardware has more or less no CMD53 support, so all registers
14 * must be accessed using sdio_readb()/sdio_writeb().
15 *
16 * Transfers must be in one transaction or the firmware goes bonkers.
17 * This means that the transfer must either be small enough to do a
18 * byte based transfer or it must be padded to a multiple of the
19 * current block size.
20 *
21 * As SDIO is still new to the kernel, it is unfortunately common with
22 * bugs in the host controllers related to that. One such bug is that
23 * controllers cannot do transfers that aren't a multiple of 4 bytes.
24 * If you don't have time to fix the host controller driver, you can
25 * work around the problem by modifying if_sdio_host_to_card() and
26 * if_sdio_card_to_host() to pad the data.
27 */
28
29 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
30
31 #include <linux/kernel.h>
32 #include <linux/module.h>
33 #include <linux/slab.h>
34 #include <linux/firmware.h>
35 #include <linux/netdevice.h>
36 #include <linux/delay.h>
37 #include <linux/mmc/card.h>
38 #include <linux/mmc/sdio_func.h>
39 #include <linux/mmc/sdio_ids.h>
40 #include <linux/mmc/sdio.h>
41 #include <linux/mmc/host.h>
42 #include <linux/pm_runtime.h>
43
44 #include "host.h"
45 #include "decl.h"
46 #include "defs.h"
47 #include "dev.h"
48 #include "cmd.h"
49 #include "if_sdio.h"
50
51 static void if_sdio_interrupt(struct sdio_func *func);
52
53 /* The if_sdio_remove() callback function is called when
54 * user removes this module from kernel space or ejects
55 * the card from the slot. The driver handles these 2 cases
56 * differently for SD8688 combo chip.
57 * If the user is removing the module, the FUNC_SHUTDOWN
58 * command for SD8688 is sent to the firmware.
59 * If the card is removed, there is no need to send this command.
60 *
61 * The variable 'user_rmmod' is used to distinguish these two
62 * scenarios. This flag is initialized as FALSE in case the card
63 * is removed, and will be set to TRUE for module removal when
64 * module_exit function is called.
65 */
66 static u8 user_rmmod;
67
68 static const struct sdio_device_id if_sdio_ids[] = {
69 { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL,
70 SDIO_DEVICE_ID_MARVELL_LIBERTAS) },
71 { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL,
72 SDIO_DEVICE_ID_MARVELL_8688WLAN) },
73 { /* end: all zeroes */ },
74 };
75
76 MODULE_DEVICE_TABLE(sdio, if_sdio_ids);
77
78 #define MODEL_8385 0x04
79 #define MODEL_8686 0x0b
80 #define MODEL_8688 0x10
81
82 static const struct lbs_fw_table fw_table[] = {
83 { MODEL_8385, "libertas/sd8385_helper.bin", "libertas/sd8385.bin" },
84 { MODEL_8385, "sd8385_helper.bin", "sd8385.bin" },
85 { MODEL_8686, "libertas/sd8686_v9_helper.bin", "libertas/sd8686_v9.bin" },
86 { MODEL_8686, "libertas/sd8686_v8_helper.bin", "libertas/sd8686_v8.bin" },
87 { MODEL_8686, "sd8686_helper.bin", "sd8686.bin" },
88 { MODEL_8688, "libertas/sd8688_helper.bin", "libertas/sd8688.bin" },
89 { MODEL_8688, "sd8688_helper.bin", "sd8688.bin" },
90 { 0, NULL, NULL }
91 };
92 MODULE_FIRMWARE("libertas/sd8385_helper.bin");
93 MODULE_FIRMWARE("libertas/sd8385.bin");
94 MODULE_FIRMWARE("sd8385_helper.bin");
95 MODULE_FIRMWARE("sd8385.bin");
96 MODULE_FIRMWARE("libertas/sd8686_v9_helper.bin");
97 MODULE_FIRMWARE("libertas/sd8686_v9.bin");
98 MODULE_FIRMWARE("libertas/sd8686_v8_helper.bin");
99 MODULE_FIRMWARE("libertas/sd8686_v8.bin");
100 MODULE_FIRMWARE("sd8686_helper.bin");
101 MODULE_FIRMWARE("sd8686.bin");
102 MODULE_FIRMWARE("libertas/sd8688_helper.bin");
103 MODULE_FIRMWARE("libertas/sd8688.bin");
104 MODULE_FIRMWARE("sd8688_helper.bin");
105 MODULE_FIRMWARE("sd8688.bin");
106
107 struct if_sdio_packet {
108 struct if_sdio_packet *next;
109 u16 nb;
110 u8 buffer[0] __attribute__((aligned(4)));
111 };
112
113 struct if_sdio_card {
114 struct sdio_func *func;
115 struct lbs_private *priv;
116
117 int model;
118 unsigned long ioport;
119 unsigned int scratch_reg;
120 bool started;
121 wait_queue_head_t pwron_waitq;
122
123 u8 buffer[65536] __attribute__((aligned(4)));
124
125 spinlock_t lock;
126 struct if_sdio_packet *packets;
127
128 struct workqueue_struct *workqueue;
129 struct work_struct packet_worker;
130
131 u8 rx_unit;
132 };
133
134 static void if_sdio_finish_power_on(struct if_sdio_card *card);
135 static int if_sdio_power_off(struct if_sdio_card *card);
136
137 /********************************************************************/
138 /* I/O */
139 /********************************************************************/
140
141 /*
142 * For SD8385/SD8686, this function reads firmware status after
143 * the image is downloaded, or reads RX packet length when
144 * interrupt (with IF_SDIO_H_INT_UPLD bit set) is received.
145 * For SD8688, this function reads firmware status only.
146 */
147 static u16 if_sdio_read_scratch(struct if_sdio_card *card, int *err)
148 {
149 int ret;
150 u16 scratch;
151
152 scratch = sdio_readb(card->func, card->scratch_reg, &ret);
153 if (!ret)
154 scratch |= sdio_readb(card->func, card->scratch_reg + 1,
155 &ret) << 8;
156
157 if (err)
158 *err = ret;
159
160 if (ret)
161 return 0xffff;
162
163 return scratch;
164 }
165
166 static u8 if_sdio_read_rx_unit(struct if_sdio_card *card)
167 {
168 int ret;
169 u8 rx_unit;
170
171 rx_unit = sdio_readb(card->func, IF_SDIO_RX_UNIT, &ret);
172
173 if (ret)
174 rx_unit = 0;
175
176 return rx_unit;
177 }
178
179 static u16 if_sdio_read_rx_len(struct if_sdio_card *card, int *err)
180 {
181 int ret;
182 u16 rx_len;
183
184 switch (card->model) {
185 case MODEL_8385:
186 case MODEL_8686:
187 rx_len = if_sdio_read_scratch(card, &ret);
188 break;
189 case MODEL_8688:
190 default: /* for newer chipsets */
191 rx_len = sdio_readb(card->func, IF_SDIO_RX_LEN, &ret);
192 if (!ret)
193 rx_len <<= card->rx_unit;
194 else
195 rx_len = 0xffff; /* invalid length */
196
197 break;
198 }
199
200 if (err)
201 *err = ret;
202
203 return rx_len;
204 }
205
206 static int if_sdio_handle_cmd(struct if_sdio_card *card,
207 u8 *buffer, unsigned size)
208 {
209 struct lbs_private *priv = card->priv;
210 int ret;
211 unsigned long flags;
212 u8 i;
213
214 lbs_deb_enter(LBS_DEB_SDIO);
215
216 if (size > LBS_CMD_BUFFER_SIZE) {
217 lbs_deb_sdio("response packet too large (%d bytes)\n",
218 (int)size);
219 ret = -E2BIG;
220 goto out;
221 }
222
223 spin_lock_irqsave(&priv->driver_lock, flags);
224
225 i = (priv->resp_idx == 0) ? 1 : 0;
226 BUG_ON(priv->resp_len[i]);
227 priv->resp_len[i] = size;
228 memcpy(priv->resp_buf[i], buffer, size);
229 lbs_notify_command_response(priv, i);
230
231 spin_unlock_irqrestore(&card->priv->driver_lock, flags);
232
233 ret = 0;
234
235 out:
236 lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
237 return ret;
238 }
239
240 static int if_sdio_handle_data(struct if_sdio_card *card,
241 u8 *buffer, unsigned size)
242 {
243 int ret;
244 struct sk_buff *skb;
245 char *data;
246
247 lbs_deb_enter(LBS_DEB_SDIO);
248
249 if (size > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) {
250 lbs_deb_sdio("response packet too large (%d bytes)\n",
251 (int)size);
252 ret = -E2BIG;
253 goto out;
254 }
255
256 skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE + NET_IP_ALIGN);
257 if (!skb) {
258 ret = -ENOMEM;
259 goto out;
260 }
261
262 skb_reserve(skb, NET_IP_ALIGN);
263
264 data = skb_put(skb, size);
265
266 memcpy(data, buffer, size);
267
268 lbs_process_rxed_packet(card->priv, skb);
269
270 ret = 0;
271
272 out:
273 lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
274
275 return ret;
276 }
277
278 static int if_sdio_handle_event(struct if_sdio_card *card,
279 u8 *buffer, unsigned size)
280 {
281 int ret;
282 u32 event;
283
284 lbs_deb_enter(LBS_DEB_SDIO);
285
286 if (card->model == MODEL_8385) {
287 event = sdio_readb(card->func, IF_SDIO_EVENT, &ret);
288 if (ret)
289 goto out;
290
291 /* right shift 3 bits to get the event id */
292 event >>= 3;
293 } else {
294 if (size < 4) {
295 lbs_deb_sdio("event packet too small (%d bytes)\n",
296 (int)size);
297 ret = -EINVAL;
298 goto out;
299 }
300 event = buffer[3] << 24;
301 event |= buffer[2] << 16;
302 event |= buffer[1] << 8;
303 event |= buffer[0] << 0;
304 }
305
306 lbs_queue_event(card->priv, event & 0xFF);
307 ret = 0;
308
309 out:
310 lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
311
312 return ret;
313 }
314
315 static int if_sdio_wait_status(struct if_sdio_card *card, const u8 condition)
316 {
317 u8 status;
318 unsigned long timeout;
319 int ret = 0;
320
321 timeout = jiffies + HZ;
322 while (1) {
323 status = sdio_readb(card->func, IF_SDIO_STATUS, &ret);
324 if (ret)
325 return ret;
326 if ((status & condition) == condition)
327 break;
328 if (time_after(jiffies, timeout))
329 return -ETIMEDOUT;
330 mdelay(1);
331 }
332 return ret;
333 }
334
335 static int if_sdio_card_to_host(struct if_sdio_card *card)
336 {
337 int ret;
338 u16 size, type, chunk;
339
340 lbs_deb_enter(LBS_DEB_SDIO);
341
342 size = if_sdio_read_rx_len(card, &ret);
343 if (ret)
344 goto out;
345
346 if (size < 4) {
347 lbs_deb_sdio("invalid packet size (%d bytes) from firmware\n",
348 (int)size);
349 ret = -EINVAL;
350 goto out;
351 }
352
353 ret = if_sdio_wait_status(card, IF_SDIO_IO_RDY);
354 if (ret)
355 goto out;
356
357 /*
358 * The transfer must be in one transaction or the firmware
359 * goes suicidal. There's no way to guarantee that for all
360 * controllers, but we can at least try.
361 */
362 chunk = sdio_align_size(card->func, size);
363
364 ret = sdio_readsb(card->func, card->buffer, card->ioport, chunk);
365 if (ret)
366 goto out;
367
368 chunk = card->buffer[0] | (card->buffer[1] << 8);
369 type = card->buffer[2] | (card->buffer[3] << 8);
370
371 lbs_deb_sdio("packet of type %d and size %d bytes\n",
372 (int)type, (int)chunk);
373
374 if (chunk > size) {
375 lbs_deb_sdio("packet fragment (%d > %d)\n",
376 (int)chunk, (int)size);
377 ret = -EINVAL;
378 goto out;
379 }
380
381 if (chunk < size) {
382 lbs_deb_sdio("packet fragment (%d < %d)\n",
383 (int)chunk, (int)size);
384 }
385
386 switch (type) {
387 case MVMS_CMD:
388 ret = if_sdio_handle_cmd(card, card->buffer + 4, chunk - 4);
389 if (ret)
390 goto out;
391 break;
392 case MVMS_DAT:
393 ret = if_sdio_handle_data(card, card->buffer + 4, chunk - 4);
394 if (ret)
395 goto out;
396 break;
397 case MVMS_EVENT:
398 ret = if_sdio_handle_event(card, card->buffer + 4, chunk - 4);
399 if (ret)
400 goto out;
401 break;
402 default:
403 lbs_deb_sdio("invalid type (%d) from firmware\n",
404 (int)type);
405 ret = -EINVAL;
406 goto out;
407 }
408
409 out:
410 if (ret)
411 pr_err("problem fetching packet from firmware\n");
412
413 lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
414
415 return ret;
416 }
417
418 static void if_sdio_host_to_card_worker(struct work_struct *work)
419 {
420 struct if_sdio_card *card;
421 struct if_sdio_packet *packet;
422 int ret;
423 unsigned long flags;
424
425 lbs_deb_enter(LBS_DEB_SDIO);
426
427 card = container_of(work, struct if_sdio_card, packet_worker);
428
429 while (1) {
430 spin_lock_irqsave(&card->lock, flags);
431 packet = card->packets;
432 if (packet)
433 card->packets = packet->next;
434 spin_unlock_irqrestore(&card->lock, flags);
435
436 if (!packet)
437 break;
438
439 sdio_claim_host(card->func);
440
441 ret = if_sdio_wait_status(card, IF_SDIO_IO_RDY);
442 if (ret == 0) {
443 ret = sdio_writesb(card->func, card->ioport,
444 packet->buffer, packet->nb);
445 }
446
447 if (ret)
448 pr_err("error %d sending packet to firmware\n", ret);
449
450 sdio_release_host(card->func);
451
452 kfree(packet);
453 }
454
455 lbs_deb_leave(LBS_DEB_SDIO);
456 }
457
458 /********************************************************************/
459 /* Firmware */
460 /********************************************************************/
461
462 #define FW_DL_READY_STATUS (IF_SDIO_IO_RDY | IF_SDIO_DL_RDY)
463
464 static int if_sdio_prog_helper(struct if_sdio_card *card,
465 const struct firmware *fw)
466 {
467 int ret;
468 unsigned long timeout;
469 u8 *chunk_buffer;
470 u32 chunk_size;
471 const u8 *firmware;
472 size_t size;
473
474 lbs_deb_enter(LBS_DEB_SDIO);
475
476 chunk_buffer = kzalloc(64, GFP_KERNEL);
477 if (!chunk_buffer) {
478 ret = -ENOMEM;
479 goto out;
480 }
481
482 sdio_claim_host(card->func);
483
484 ret = sdio_set_block_size(card->func, 32);
485 if (ret)
486 goto release;
487
488 firmware = fw->data;
489 size = fw->size;
490
491 while (size) {
492 ret = if_sdio_wait_status(card, FW_DL_READY_STATUS);
493 if (ret)
494 goto release;
495
496 /* On some platforms (like Davinci) the chip needs more time
497 * between helper blocks.
498 */
499 mdelay(2);
500
501 chunk_size = min(size, (size_t)60);
502
503 *((__le32*)chunk_buffer) = cpu_to_le32(chunk_size);
504 memcpy(chunk_buffer + 4, firmware, chunk_size);
505 /*
506 lbs_deb_sdio("sending %d bytes chunk\n", chunk_size);
507 */
508 ret = sdio_writesb(card->func, card->ioport,
509 chunk_buffer, 64);
510 if (ret)
511 goto release;
512
513 firmware += chunk_size;
514 size -= chunk_size;
515 }
516
517 /* an empty block marks the end of the transfer */
518 memset(chunk_buffer, 0, 4);
519 ret = sdio_writesb(card->func, card->ioport, chunk_buffer, 64);
520 if (ret)
521 goto release;
522
523 lbs_deb_sdio("waiting for helper to boot...\n");
524
525 /* wait for the helper to boot by looking at the size register */
526 timeout = jiffies + HZ;
527 while (1) {
528 u16 req_size;
529
530 req_size = sdio_readb(card->func, IF_SDIO_RD_BASE, &ret);
531 if (ret)
532 goto release;
533
534 req_size |= sdio_readb(card->func, IF_SDIO_RD_BASE + 1, &ret) << 8;
535 if (ret)
536 goto release;
537
538 if (req_size != 0)
539 break;
540
541 if (time_after(jiffies, timeout)) {
542 ret = -ETIMEDOUT;
543 goto release;
544 }
545
546 msleep(10);
547 }
548
549 ret = 0;
550
551 release:
552 sdio_release_host(card->func);
553 kfree(chunk_buffer);
554
555 out:
556 if (ret)
557 pr_err("failed to load helper firmware\n");
558
559 lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
560 return ret;
561 }
562
563 static int if_sdio_prog_real(struct if_sdio_card *card,
564 const struct firmware *fw)
565 {
566 int ret;
567 unsigned long timeout;
568 u8 *chunk_buffer;
569 u32 chunk_size;
570 const u8 *firmware;
571 size_t size, req_size;
572
573 lbs_deb_enter(LBS_DEB_SDIO);
574
575 chunk_buffer = kzalloc(512, GFP_KERNEL);
576 if (!chunk_buffer) {
577 ret = -ENOMEM;
578 goto out;
579 }
580
581 sdio_claim_host(card->func);
582
583 ret = sdio_set_block_size(card->func, 32);
584 if (ret)
585 goto release;
586
587 firmware = fw->data;
588 size = fw->size;
589
590 while (size) {
591 timeout = jiffies + HZ;
592 while (1) {
593 ret = if_sdio_wait_status(card, FW_DL_READY_STATUS);
594 if (ret)
595 goto release;
596
597 req_size = sdio_readb(card->func, IF_SDIO_RD_BASE,
598 &ret);
599 if (ret)
600 goto release;
601
602 req_size |= sdio_readb(card->func, IF_SDIO_RD_BASE + 1,
603 &ret) << 8;
604 if (ret)
605 goto release;
606
607 /*
608 * For SD8688 wait until the length is not 0, 1 or 2
609 * before downloading the first FW block,
610 * since BOOT code writes the register to indicate the
611 * helper/FW download winner,
612 * the value could be 1 or 2 (Func1 or Func2).
613 */
614 if ((size != fw->size) || (req_size > 2))
615 break;
616 if (time_after(jiffies, timeout)) {
617 ret = -ETIMEDOUT;
618 goto release;
619 }
620 mdelay(1);
621 }
622
623 /*
624 lbs_deb_sdio("firmware wants %d bytes\n", (int)req_size);
625 */
626 if (req_size == 0) {
627 lbs_deb_sdio("firmware helper gave up early\n");
628 ret = -EIO;
629 goto release;
630 }
631
632 if (req_size & 0x01) {
633 lbs_deb_sdio("firmware helper signalled error\n");
634 ret = -EIO;
635 goto release;
636 }
637
638 if (req_size > size)
639 req_size = size;
640
641 while (req_size) {
642 chunk_size = min(req_size, (size_t)512);
643
644 memcpy(chunk_buffer, firmware, chunk_size);
645 /*
646 lbs_deb_sdio("sending %d bytes (%d bytes) chunk\n",
647 chunk_size, (chunk_size + 31) / 32 * 32);
648 */
649 ret = sdio_writesb(card->func, card->ioport,
650 chunk_buffer, roundup(chunk_size, 32));
651 if (ret)
652 goto release;
653
654 firmware += chunk_size;
655 size -= chunk_size;
656 req_size -= chunk_size;
657 }
658 }
659
660 ret = 0;
661
662 lbs_deb_sdio("waiting for firmware to boot...\n");
663
664 /* wait for the firmware to boot */
665 timeout = jiffies + HZ;
666 while (1) {
667 u16 scratch;
668
669 scratch = if_sdio_read_scratch(card, &ret);
670 if (ret)
671 goto release;
672
673 if (scratch == IF_SDIO_FIRMWARE_OK)
674 break;
675
676 if (time_after(jiffies, timeout)) {
677 ret = -ETIMEDOUT;
678 goto release;
679 }
680
681 msleep(10);
682 }
683
684 ret = 0;
685
686 release:
687 sdio_release_host(card->func);
688 kfree(chunk_buffer);
689
690 out:
691 if (ret)
692 pr_err("failed to load firmware\n");
693
694 lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
695 return ret;
696 }
697
698 static void if_sdio_do_prog_firmware(struct lbs_private *priv, int ret,
699 const struct firmware *helper,
700 const struct firmware *mainfw)
701 {
702 struct if_sdio_card *card = priv->card;
703
704 if (ret) {
705 pr_err("failed to find firmware (%d)\n", ret);
706 return;
707 }
708
709 ret = if_sdio_prog_helper(card, helper);
710 if (ret)
711 goto out;
712
713 lbs_deb_sdio("Helper firmware loaded\n");
714
715 ret = if_sdio_prog_real(card, mainfw);
716 if (ret)
717 goto out;
718
719 lbs_deb_sdio("Firmware loaded\n");
720 if_sdio_finish_power_on(card);
721
722 out:
723 release_firmware(helper);
724 release_firmware(mainfw);
725 }
726
727 static int if_sdio_prog_firmware(struct if_sdio_card *card)
728 {
729 int ret;
730 u16 scratch;
731
732 lbs_deb_enter(LBS_DEB_SDIO);
733
734 /*
735 * Disable interrupts
736 */
737 sdio_claim_host(card->func);
738 sdio_writeb(card->func, 0x00, IF_SDIO_H_INT_MASK, &ret);
739 sdio_release_host(card->func);
740
741 sdio_claim_host(card->func);
742 scratch = if_sdio_read_scratch(card, &ret);
743 sdio_release_host(card->func);
744
745 lbs_deb_sdio("firmware status = %#x\n", scratch);
746 lbs_deb_sdio("scratch ret = %d\n", ret);
747
748 if (ret)
749 goto out;
750
751
752 /*
753 * The manual clearly describes that FEDC is the right code to use
754 * to detect firmware presence, but for SD8686 it is not that simple.
755 * Scratch is also used to store the RX packet length, so we lose
756 * the FEDC value early on. So we use a non-zero check in order
757 * to validate firmware presence.
758 * Additionally, the SD8686 in the Gumstix always has the high scratch
759 * bit set, even when the firmware is not loaded. So we have to
760 * exclude that from the test.
761 */
762 if (scratch == IF_SDIO_FIRMWARE_OK) {
763 lbs_deb_sdio("firmware already loaded\n");
764 if_sdio_finish_power_on(card);
765 return 0;
766 } else if ((card->model == MODEL_8686) && (scratch & 0x7fff)) {
767 lbs_deb_sdio("firmware may be running\n");
768 if_sdio_finish_power_on(card);
769 return 0;
770 }
771
772 ret = lbs_get_firmware_async(card->priv, &card->func->dev, card->model,
773 fw_table, if_sdio_do_prog_firmware);
774
775 out:
776 lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
777 return ret;
778 }
779
780 /********************************************************************/
781 /* Power management */
782 /********************************************************************/
783
784 /* Finish power on sequence (after firmware is loaded) */
785 static void if_sdio_finish_power_on(struct if_sdio_card *card)
786 {
787 struct sdio_func *func = card->func;
788 struct lbs_private *priv = card->priv;
789 int ret;
790
791 sdio_claim_host(func);
792 sdio_set_block_size(card->func, IF_SDIO_BLOCK_SIZE);
793
794 /*
795 * Get rx_unit if the chip is SD8688 or newer.
796 * SD8385 & SD8686 do not have rx_unit.
797 */
798 if ((card->model != MODEL_8385)
799 && (card->model != MODEL_8686))
800 card->rx_unit = if_sdio_read_rx_unit(card);
801 else
802 card->rx_unit = 0;
803
804 /*
805 * Set up the interrupt handler late.
806 *
807 * If we set it up earlier, the (buggy) hardware generates a spurious
808 * interrupt, even before the interrupt has been enabled, with
809 * CCCR_INTx = 0.
810 *
811 * We register the interrupt handler late so that we can handle any
812 * spurious interrupts, and also to avoid generation of that known
813 * spurious interrupt in the first place.
814 */
815 ret = sdio_claim_irq(func, if_sdio_interrupt);
816 if (ret)
817 goto release;
818
819 /*
820 * Enable interrupts now that everything is set up
821 */
822 sdio_writeb(func, 0x0f, IF_SDIO_H_INT_MASK, &ret);
823 if (ret)
824 goto release_irq;
825
826 sdio_release_host(func);
827
828 /* Set fw_ready before queuing any commands so that
829 * lbs_thread won't block from sending them to firmware.
830 */
831 priv->fw_ready = 1;
832
833 /*
834 * FUNC_INIT is required for SD8688 WLAN/BT multiple functions
835 */
836 if (card->model == MODEL_8688) {
837 struct cmd_header cmd;
838
839 memset(&cmd, 0, sizeof(cmd));
840
841 lbs_deb_sdio("send function INIT command\n");
842 if (__lbs_cmd(priv, CMD_FUNC_INIT, &cmd, sizeof(cmd),
843 lbs_cmd_copyback, (unsigned long) &cmd))
844 netdev_alert(priv->dev, "CMD_FUNC_INIT cmd failed\n");
845 }
846
847 wake_up(&card->pwron_waitq);
848
849 if (!card->started) {
850 ret = lbs_start_card(priv);
851 if_sdio_power_off(card);
852 if (ret == 0) {
853 card->started = true;
854 /* Tell PM core that we don't need the card to be
855 * powered now */
856 pm_runtime_put_noidle(&func->dev);
857 }
858 }
859
860 return;
861
862 release_irq:
863 sdio_release_irq(func);
864 release:
865 sdio_release_host(func);
866 }
867
868 static int if_sdio_power_on(struct if_sdio_card *card)
869 {
870 struct sdio_func *func = card->func;
871 struct mmc_host *host = func->card->host;
872 int ret;
873
874 sdio_claim_host(func);
875
876 ret = sdio_enable_func(func);
877 if (ret)
878 goto release;
879
880 /* For 1-bit transfers to the 8686 model, we need to enable the
881 * interrupt flag in the CCCR register. Set the MMC_QUIRK_LENIENT_FN0
882 * bit to allow access to non-vendor registers. */
883 if ((card->model == MODEL_8686) &&
884 (host->caps & MMC_CAP_SDIO_IRQ) &&
885 (host->ios.bus_width == MMC_BUS_WIDTH_1)) {
886 u8 reg;
887
888 func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
889 reg = sdio_f0_readb(func, SDIO_CCCR_IF, &ret);
890 if (ret)
891 goto disable;
892
893 reg |= SDIO_BUS_ECSI;
894 sdio_f0_writeb(func, reg, SDIO_CCCR_IF, &ret);
895 if (ret)
896 goto disable;
897 }
898
899 card->ioport = sdio_readb(func, IF_SDIO_IOPORT, &ret);
900 if (ret)
901 goto disable;
902
903 card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 1, &ret) << 8;
904 if (ret)
905 goto disable;
906
907 card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 2, &ret) << 16;
908 if (ret)
909 goto disable;
910
911 sdio_release_host(func);
912 ret = if_sdio_prog_firmware(card);
913 if (ret) {
914 sdio_disable_func(func);
915 return ret;
916 }
917
918 return 0;
919
920 disable:
921 sdio_disable_func(func);
922 release:
923 sdio_release_host(func);
924 return ret;
925 }
926
927 static int if_sdio_power_off(struct if_sdio_card *card)
928 {
929 struct sdio_func *func = card->func;
930 struct lbs_private *priv = card->priv;
931
932 priv->fw_ready = 0;
933
934 sdio_claim_host(func);
935 sdio_release_irq(func);
936 sdio_disable_func(func);
937 sdio_release_host(func);
938 return 0;
939 }
940
941
942 /*******************************************************************/
943 /* Libertas callbacks */
944 /*******************************************************************/
945
946 static int if_sdio_host_to_card(struct lbs_private *priv,
947 u8 type, u8 *buf, u16 nb)
948 {
949 int ret;
950 struct if_sdio_card *card;
951 struct if_sdio_packet *packet, *cur;
952 u16 size;
953 unsigned long flags;
954
955 lbs_deb_enter_args(LBS_DEB_SDIO, "type %d, bytes %d", type, nb);
956
957 card = priv->card;
958
959 if (nb > (65536 - sizeof(struct if_sdio_packet) - 4)) {
960 ret = -EINVAL;
961 goto out;
962 }
963
964 /*
965 * The transfer must be in one transaction or the firmware
966 * goes suicidal. There's no way to guarantee that for all
967 * controllers, but we can at least try.
968 */
969 size = sdio_align_size(card->func, nb + 4);
970
971 packet = kzalloc(sizeof(struct if_sdio_packet) + size,
972 GFP_ATOMIC);
973 if (!packet) {
974 ret = -ENOMEM;
975 goto out;
976 }
977
978 packet->next = NULL;
979 packet->nb = size;
980
981 /*
982 * SDIO specific header.
983 */
984 packet->buffer[0] = (nb + 4) & 0xff;
985 packet->buffer[1] = ((nb + 4) >> 8) & 0xff;
986 packet->buffer[2] = type;
987 packet->buffer[3] = 0;
988
989 memcpy(packet->buffer + 4, buf, nb);
990
991 spin_lock_irqsave(&card->lock, flags);
992
993 if (!card->packets)
994 card->packets = packet;
995 else {
996 cur = card->packets;
997 while (cur->next)
998 cur = cur->next;
999 cur->next = packet;
1000 }
1001
1002 switch (type) {
1003 case MVMS_CMD:
1004 priv->dnld_sent = DNLD_CMD_SENT;
1005 break;
1006 case MVMS_DAT:
1007 priv->dnld_sent = DNLD_DATA_SENT;
1008 break;
1009 default:
1010 lbs_deb_sdio("unknown packet type %d\n", (int)type);
1011 }
1012
1013 spin_unlock_irqrestore(&card->lock, flags);
1014
1015 queue_work(card->workqueue, &card->packet_worker);
1016
1017 ret = 0;
1018
1019 out:
1020 lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
1021
1022 return ret;
1023 }
1024
1025 static int if_sdio_enter_deep_sleep(struct lbs_private *priv)
1026 {
1027 int ret = -1;
1028 struct cmd_header cmd;
1029
1030 memset(&cmd, 0, sizeof(cmd));
1031
1032 lbs_deb_sdio("send DEEP_SLEEP command\n");
1033 ret = __lbs_cmd(priv, CMD_802_11_DEEP_SLEEP, &cmd, sizeof(cmd),
1034 lbs_cmd_copyback, (unsigned long) &cmd);
1035 if (ret)
1036 netdev_err(priv->dev, "DEEP_SLEEP cmd failed\n");
1037
1038 mdelay(200);
1039 return ret;
1040 }
1041
1042 static int if_sdio_exit_deep_sleep(struct lbs_private *priv)
1043 {
1044 struct if_sdio_card *card = priv->card;
1045 int ret = -1;
1046
1047 lbs_deb_enter(LBS_DEB_SDIO);
1048 sdio_claim_host(card->func);
1049
1050 sdio_writeb(card->func, HOST_POWER_UP, CONFIGURATION_REG, &ret);
1051 if (ret)
1052 netdev_err(priv->dev, "sdio_writeb failed!\n");
1053
1054 sdio_release_host(card->func);
1055 lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
1056 return ret;
1057 }
1058
1059 static int if_sdio_reset_deep_sleep_wakeup(struct lbs_private *priv)
1060 {
1061 struct if_sdio_card *card = priv->card;
1062 int ret = -1;
1063
1064 lbs_deb_enter(LBS_DEB_SDIO);
1065 sdio_claim_host(card->func);
1066
1067 sdio_writeb(card->func, 0, CONFIGURATION_REG, &ret);
1068 if (ret)
1069 netdev_err(priv->dev, "sdio_writeb failed!\n");
1070
1071 sdio_release_host(card->func);
1072 lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
1073 return ret;
1074
1075 }
1076
1077 static struct mmc_host *reset_host;
1078
1079 static void if_sdio_reset_card_worker(struct work_struct *work)
1080 {
1081 /*
1082 * The actual reset operation must be run outside of lbs_thread. This
1083 * is because mmc_remove_host() will cause the device to be instantly
1084 * destroyed, and the libertas driver then needs to end lbs_thread,
1085 * leading to a deadlock.
1086 *
1087 * We run it in a workqueue totally independent from the if_sdio_card
1088 * instance for that reason.
1089 */
1090
1091 pr_info("Resetting card...");
1092 mmc_remove_host(reset_host);
1093 mmc_add_host(reset_host);
1094 }
1095 static DECLARE_WORK(card_reset_work, if_sdio_reset_card_worker);
1096
1097 static void if_sdio_reset_card(struct lbs_private *priv)
1098 {
1099 struct if_sdio_card *card = priv->card;
1100
1101 if (work_pending(&card_reset_work))
1102 return;
1103
1104 reset_host = card->func->card->host;
1105 schedule_work(&card_reset_work);
1106 }
1107
1108 static int if_sdio_power_save(struct lbs_private *priv)
1109 {
1110 struct if_sdio_card *card = priv->card;
1111 int ret;
1112
1113 flush_workqueue(card->workqueue);
1114
1115 ret = if_sdio_power_off(card);
1116
1117 /* Let runtime PM know the card is powered off */
1118 pm_runtime_put_sync(&card->func->dev);
1119
1120 return ret;
1121 }
1122
1123 static int if_sdio_power_restore(struct lbs_private *priv)
1124 {
1125 struct if_sdio_card *card = priv->card;
1126 int r;
1127
1128 /* Make sure the card will not be powered off by runtime PM */
1129 pm_runtime_get_sync(&card->func->dev);
1130
1131 r = if_sdio_power_on(card);
1132 if (r)
1133 return r;
1134
1135 wait_event(card->pwron_waitq, priv->fw_ready);
1136 return 0;
1137 }
1138
1139
1140 /*******************************************************************/
1141 /* SDIO callbacks */
1142 /*******************************************************************/
1143
1144 static void if_sdio_interrupt(struct sdio_func *func)
1145 {
1146 int ret;
1147 struct if_sdio_card *card;
1148 u8 cause;
1149
1150 lbs_deb_enter(LBS_DEB_SDIO);
1151
1152 card = sdio_get_drvdata(func);
1153
1154 cause = sdio_readb(card->func, IF_SDIO_H_INT_STATUS, &ret);
1155 if (ret || !cause)
1156 goto out;
1157
1158 lbs_deb_sdio("interrupt: 0x%X\n", (unsigned)cause);
1159
1160 sdio_writeb(card->func, ~cause, IF_SDIO_H_INT_STATUS, &ret);
1161 if (ret)
1162 goto out;
1163
1164 /*
1165 * Ignore the define name, this really means the card has
1166 * successfully received the command.
1167 */
1168 card->priv->is_activity_detected = 1;
1169 if (cause & IF_SDIO_H_INT_DNLD)
1170 lbs_host_to_card_done(card->priv);
1171
1172
1173 if (cause & IF_SDIO_H_INT_UPLD) {
1174 ret = if_sdio_card_to_host(card);
1175 if (ret)
1176 goto out;
1177 }
1178
1179 ret = 0;
1180
1181 out:
1182 lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
1183 }
1184
1185 static int if_sdio_probe(struct sdio_func *func,
1186 const struct sdio_device_id *id)
1187 {
1188 struct if_sdio_card *card;
1189 struct lbs_private *priv;
1190 int ret, i;
1191 unsigned int model;
1192 struct if_sdio_packet *packet;
1193
1194 lbs_deb_enter(LBS_DEB_SDIO);
1195
1196 for (i = 0;i < func->card->num_info;i++) {
1197 if (sscanf(func->card->info[i],
1198 "802.11 SDIO ID: %x", &model) == 1)
1199 break;
1200 if (sscanf(func->card->info[i],
1201 "ID: %x", &model) == 1)
1202 break;
1203 if (!strcmp(func->card->info[i], "IBIS Wireless SDIO Card")) {
1204 model = MODEL_8385;
1205 break;
1206 }
1207 }
1208
1209 if (i == func->card->num_info) {
1210 pr_err("unable to identify card model\n");
1211 return -ENODEV;
1212 }
1213
1214 card = kzalloc(sizeof(struct if_sdio_card), GFP_KERNEL);
1215 if (!card)
1216 return -ENOMEM;
1217
1218 card->func = func;
1219 card->model = model;
1220
1221 switch (card->model) {
1222 case MODEL_8385:
1223 card->scratch_reg = IF_SDIO_SCRATCH_OLD;
1224 break;
1225 case MODEL_8686:
1226 card->scratch_reg = IF_SDIO_SCRATCH;
1227 break;
1228 case MODEL_8688:
1229 default: /* for newer chipsets */
1230 card->scratch_reg = IF_SDIO_FW_STATUS;
1231 break;
1232 }
1233
1234 spin_lock_init(&card->lock);
1235 card->workqueue = create_workqueue("libertas_sdio");
1236 INIT_WORK(&card->packet_worker, if_sdio_host_to_card_worker);
1237 init_waitqueue_head(&card->pwron_waitq);
1238
1239 /* Check if we support this card */
1240 for (i = 0; i < ARRAY_SIZE(fw_table); i++) {
1241 if (card->model == fw_table[i].model)
1242 break;
1243 }
1244 if (i == ARRAY_SIZE(fw_table)) {
1245 pr_err("unknown card model 0x%x\n", card->model);
1246 ret = -ENODEV;
1247 goto free;
1248 }
1249
1250 sdio_set_drvdata(func, card);
1251
1252 lbs_deb_sdio("class = 0x%X, vendor = 0x%X, "
1253 "device = 0x%X, model = 0x%X, ioport = 0x%X\n",
1254 func->class, func->vendor, func->device,
1255 model, (unsigned)card->ioport);
1256
1257
1258 priv = lbs_add_card(card, &func->dev);
1259 if (!priv) {
1260 ret = -ENOMEM;
1261 goto free;
1262 }
1263
1264 card->priv = priv;
1265
1266 priv->card = card;
1267 priv->hw_host_to_card = if_sdio_host_to_card;
1268 priv->enter_deep_sleep = if_sdio_enter_deep_sleep;
1269 priv->exit_deep_sleep = if_sdio_exit_deep_sleep;
1270 priv->reset_deep_sleep_wakeup = if_sdio_reset_deep_sleep_wakeup;
1271 priv->reset_card = if_sdio_reset_card;
1272 priv->power_save = if_sdio_power_save;
1273 priv->power_restore = if_sdio_power_restore;
1274
1275 ret = if_sdio_power_on(card);
1276 if (ret)
1277 goto err_activate_card;
1278
1279 out:
1280 lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
1281
1282 return ret;
1283
1284 err_activate_card:
1285 flush_workqueue(card->workqueue);
1286 lbs_remove_card(priv);
1287 free:
1288 destroy_workqueue(card->workqueue);
1289 while (card->packets) {
1290 packet = card->packets;
1291 card->packets = card->packets->next;
1292 kfree(packet);
1293 }
1294
1295 kfree(card);
1296
1297 goto out;
1298 }
1299
1300 static void if_sdio_remove(struct sdio_func *func)
1301 {
1302 struct if_sdio_card *card;
1303 struct if_sdio_packet *packet;
1304
1305 lbs_deb_enter(LBS_DEB_SDIO);
1306
1307 card = sdio_get_drvdata(func);
1308
1309 /* Undo decrement done above in if_sdio_probe */
1310 pm_runtime_get_noresume(&func->dev);
1311
1312 if (user_rmmod && (card->model == MODEL_8688)) {
1313 /*
1314 * FUNC_SHUTDOWN is required for SD8688 WLAN/BT
1315 * multiple functions
1316 */
1317 struct cmd_header cmd;
1318
1319 memset(&cmd, 0, sizeof(cmd));
1320
1321 lbs_deb_sdio("send function SHUTDOWN command\n");
1322 if (__lbs_cmd(card->priv, CMD_FUNC_SHUTDOWN,
1323 &cmd, sizeof(cmd), lbs_cmd_copyback,
1324 (unsigned long) &cmd))
1325 pr_alert("CMD_FUNC_SHUTDOWN cmd failed\n");
1326 }
1327
1328
1329 lbs_deb_sdio("call remove card\n");
1330 lbs_stop_card(card->priv);
1331 lbs_remove_card(card->priv);
1332
1333 flush_workqueue(card->workqueue);
1334 destroy_workqueue(card->workqueue);
1335
1336 while (card->packets) {
1337 packet = card->packets;
1338 card->packets = card->packets->next;
1339 kfree(packet);
1340 }
1341
1342 kfree(card);
1343 lbs_deb_leave(LBS_DEB_SDIO);
1344 }
1345
1346 static int if_sdio_suspend(struct device *dev)
1347 {
1348 struct sdio_func *func = dev_to_sdio_func(dev);
1349 int ret;
1350 struct if_sdio_card *card = sdio_get_drvdata(func);
1351
1352 mmc_pm_flag_t flags = sdio_get_host_pm_caps(func);
1353
1354 /* If we're powered off anyway, just let the mmc layer remove the
1355 * card. */
1356 if (!lbs_iface_active(card->priv))
1357 return -ENOSYS;
1358
1359 dev_info(dev, "%s: suspend: PM flags = 0x%x\n",
1360 sdio_func_id(func), flags);
1361
1362 /* If we aren't being asked to wake on anything, we should bail out
1363 * and let the SD stack power down the card.
1364 */
1365 if (card->priv->wol_criteria == EHS_REMOVE_WAKEUP) {
1366 dev_info(dev, "Suspend without wake params -- powering down card\n");
1367 return -ENOSYS;
1368 }
1369
1370 if (!(flags & MMC_PM_KEEP_POWER)) {
1371 dev_err(dev, "%s: cannot remain alive while host is suspended\n",
1372 sdio_func_id(func));
1373 return -ENOSYS;
1374 }
1375
1376 ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
1377 if (ret)
1378 return ret;
1379
1380 ret = lbs_suspend(card->priv);
1381 if (ret)
1382 return ret;
1383
1384 return sdio_set_host_pm_flags(func, MMC_PM_WAKE_SDIO_IRQ);
1385 }
1386
1387 static int if_sdio_resume(struct device *dev)
1388 {
1389 struct sdio_func *func = dev_to_sdio_func(dev);
1390 struct if_sdio_card *card = sdio_get_drvdata(func);
1391 int ret;
1392
1393 dev_info(dev, "%s: resume: we're back\n", sdio_func_id(func));
1394
1395 ret = lbs_resume(card->priv);
1396
1397 return ret;
1398 }
1399
1400 static const struct dev_pm_ops if_sdio_pm_ops = {
1401 .suspend = if_sdio_suspend,
1402 .resume = if_sdio_resume,
1403 };
1404
1405 static struct sdio_driver if_sdio_driver = {
1406 .name = "libertas_sdio",
1407 .id_table = if_sdio_ids,
1408 .probe = if_sdio_probe,
1409 .remove = if_sdio_remove,
1410 .drv = {
1411 .pm = &if_sdio_pm_ops,
1412 },
1413 };
1414
1415 /*******************************************************************/
1416 /* Module functions */
1417 /*******************************************************************/
1418
1419 static int __init if_sdio_init_module(void)
1420 {
1421 int ret = 0;
1422
1423 lbs_deb_enter(LBS_DEB_SDIO);
1424
1425 printk(KERN_INFO "libertas_sdio: Libertas SDIO driver\n");
1426 printk(KERN_INFO "libertas_sdio: Copyright Pierre Ossman\n");
1427
1428 ret = sdio_register_driver(&if_sdio_driver);
1429
1430 /* Clear the flag in case user removes the card. */
1431 user_rmmod = 0;
1432
1433 lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
1434
1435 return ret;
1436 }
1437
1438 static void __exit if_sdio_exit_module(void)
1439 {
1440 lbs_deb_enter(LBS_DEB_SDIO);
1441
1442 /* Set the flag as user is removing this module. */
1443 user_rmmod = 1;
1444
1445 cancel_work_sync(&card_reset_work);
1446
1447 sdio_unregister_driver(&if_sdio_driver);
1448
1449 lbs_deb_leave(LBS_DEB_SDIO);
1450 }
1451
1452 module_init(if_sdio_init_module);
1453 module_exit(if_sdio_exit_module);
1454
1455 MODULE_DESCRIPTION("Libertas SDIO WLAN Driver");
1456 MODULE_AUTHOR("Pierre Ossman");
1457 MODULE_LICENSE("GPL");
Linux kernel - Deliverables
This page took 0.100632 seconds and 5 git commands to generate.