drivers/net/wireless/libertas/if_usb.c

   1 /*
   2  * This file contains functions used in USB interface module.
   3  */
   4
   5 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
   6
   7 #include <linux/delay.h>
   8 #include <linux/module.h>
   9 #include <linux/firmware.h>
  10 #include <linux/netdevice.h>
  11 #include <linux/slab.h>
  12 #include <linux/usb.h>
  13
  14 #ifdef CONFIG_OLPC
  15 #include <asm/olpc.h>
  16 #endif
  17
  18 #define DRV_NAME "usb8xxx"
  19
  20 #include "host.h"
  21 #include "decl.h"
  22 #include "defs.h"
  23 #include "dev.h"
  24 #include "cmd.h"
  25 #include "if_usb.h"
  26
  27 #define INSANEDEBUG     0
  28 #define lbs_deb_usb2(...) do { if (INSANEDEBUG) lbs_deb_usbd(__VA_ARGS__); } while (0)
  29
  30 #define MESSAGE_HEADER_LEN      4
  31
  32 MODULE_FIRMWARE("libertas/usb8388_v9.bin");
  33 MODULE_FIRMWARE("libertas/usb8388_v5.bin");
  34 MODULE_FIRMWARE("libertas/usb8388.bin");
  35 MODULE_FIRMWARE("libertas/usb8682.bin");
  36 MODULE_FIRMWARE("usb8388.bin");
  37
  38 enum {
  39         MODEL_UNKNOWN = 0x0,
  40         MODEL_8388 = 0x1,
  41         MODEL_8682 = 0x2
  42 };
  43
  44 /* table of firmware file names */
  45 static const struct lbs_fw_table fw_table[] = {
  46         { MODEL_8388, "libertas/usb8388_olpc.bin", NULL },
  47         { MODEL_8388, "libertas/usb8388_v9.bin", NULL },
  48         { MODEL_8388, "libertas/usb8388_v5.bin", NULL },
  49         { MODEL_8388, "libertas/usb8388.bin", NULL },
  50         { MODEL_8388, "usb8388.bin", NULL },
  51         { MODEL_8682, "libertas/usb8682.bin", NULL }
  52 };
  53
  54 static struct usb_device_id if_usb_table[] = {
  55         /* Enter the device signature inside */
  56         { USB_DEVICE(0x1286, 0x2001), .driver_info = MODEL_8388 },
  57         { USB_DEVICE(0x05a3, 0x8388), .driver_info = MODEL_8388 },
  58         {}      /* Terminating entry */
  59 };
  60
  61 MODULE_DEVICE_TABLE(usb, if_usb_table);
  62
  63 static void if_usb_receive(struct urb *urb);
  64 static void if_usb_receive_fwload(struct urb *urb);
  65 static void if_usb_prog_firmware(struct lbs_private *priv, int ret,
  66                                  const struct firmware *fw,
  67                                  const struct firmware *unused);
  68 static int if_usb_host_to_card(struct lbs_private *priv, uint8_t type,
  69                                uint8_t *payload, uint16_t nb);
  70 static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload,
  71                         uint16_t nb);
  72 static void if_usb_free(struct if_usb_card *cardp);
  73 static int if_usb_submit_rx_urb(struct if_usb_card *cardp);
  74 static int if_usb_reset_device(struct if_usb_card *cardp);
  75
  76 /**
  77  * if_usb_write_bulk_callback - callback function to handle the status
  78  * of the URB
  79  * @urb:        pointer to &urb structure
  80  * returns:     N/A
  81  */
  82 static void if_usb_write_bulk_callback(struct urb *urb)
  83 {
  84         struct if_usb_card *cardp = (struct if_usb_card *) urb->context;
  85
  86         /* handle the transmission complete validations */
  87
  88         if (urb->status == 0) {
  89                 struct lbs_private *priv = cardp->priv;
  90
  91                 lbs_deb_usb2(&urb->dev->dev, "URB status is successful\n");
  92                 lbs_deb_usb2(&urb->dev->dev, "Actual length transmitted %d\n",
  93                              urb->actual_length);
  94
  95                 /* Boot commands such as UPDATE_FW and UPDATE_BOOT2 are not
  96                  * passed up to the lbs level.
  97                  */
  98                 if (priv && priv->dnld_sent != DNLD_BOOTCMD_SENT)
  99                         lbs_host_to_card_done(priv);
 100         } else {
 101                 /* print the failure status number for debug */
 102                 pr_info("URB in failure status: %d\n", urb->status);
 103         }
 104 }
 105
 106 /**
 107  * if_usb_free - free tx/rx urb, skb and rx buffer
 108  * @cardp:      pointer to &if_usb_card
 109  * returns:     N/A
 110  */
 111 static void if_usb_free(struct if_usb_card *cardp)
 112 {
 113         lbs_deb_enter(LBS_DEB_USB);
 114
 115         /* Unlink tx & rx urb */
 116         usb_kill_urb(cardp->tx_urb);
 117         usb_kill_urb(cardp->rx_urb);
 118
 119         usb_free_urb(cardp->tx_urb);
 120         cardp->tx_urb = NULL;
 121
 122         usb_free_urb(cardp->rx_urb);
 123         cardp->rx_urb = NULL;
 124
 125         kfree(cardp->ep_out_buf);
 126         cardp->ep_out_buf = NULL;
 127
 128         lbs_deb_leave(LBS_DEB_USB);
 129 }
 130
 131 static void if_usb_setup_firmware(struct lbs_private *priv)
 132 {
 133         struct if_usb_card *cardp = priv->card;
 134         struct cmd_ds_set_boot2_ver b2_cmd;
 135         struct cmd_ds_802_11_fw_wake_method wake_method;
 136
 137         b2_cmd.hdr.size = cpu_to_le16(sizeof(b2_cmd));
 138         b2_cmd.action = 0;
 139         b2_cmd.version = cardp->boot2_version;
 140
 141         if (lbs_cmd_with_response(priv, CMD_SET_BOOT2_VER, &b2_cmd))
 142                 lbs_deb_usb("Setting boot2 version failed\n");
 143
 144         priv->wol_gpio = 2; /* Wake via GPIO2... */
 145         priv->wol_gap = 20; /* ... after 20ms    */
 146         lbs_host_sleep_cfg(priv, EHS_WAKE_ON_UNICAST_DATA,
 147                         (struct wol_config *) NULL);
 148
 149         wake_method.hdr.size = cpu_to_le16(sizeof(wake_method));
 150         wake_method.action = cpu_to_le16(CMD_ACT_GET);
 151         if (lbs_cmd_with_response(priv, CMD_802_11_FW_WAKE_METHOD, &wake_method)) {
 152                 netdev_info(priv->dev, "Firmware does not seem to support PS mode\n");
 153                 priv->fwcapinfo &= ~FW_CAPINFO_PS;
 154         } else {
 155                 if (le16_to_cpu(wake_method.method) == CMD_WAKE_METHOD_COMMAND_INT) {
 156                         lbs_deb_usb("Firmware seems to support PS with wake-via-command\n");
 157                 } else {
 158                         /* The versions which boot up this way don't seem to
 159                            work even if we set it to the command interrupt */
 160                         priv->fwcapinfo &= ~FW_CAPINFO_PS;
 161                         netdev_info(priv->dev,
 162                                     "Firmware doesn't wake via command interrupt; disabling PS mode\n");
 163                 }
 164         }
 165 }
 166
 167 static void if_usb_fw_timeo(unsigned long priv)
 168 {
 169         struct if_usb_card *cardp = (void *)priv;
 170
 171         if (cardp->fwdnldover) {
 172                 lbs_deb_usb("Download complete, no event. Assuming success\n");
 173         } else {
 174                 pr_err("Download timed out\n");
 175                 cardp->surprise_removed = 1;
 176         }
 177         wake_up(&cardp->fw_wq);
 178 }
 179
 180 #ifdef CONFIG_OLPC
 181 static void if_usb_reset_olpc_card(struct lbs_private *priv)
 182 {
 183         printk(KERN_CRIT "Resetting OLPC wireless via EC...\n");
 184         olpc_ec_cmd(0x25, NULL, 0, NULL, 0);
 185 }
 186 #endif
 187
 188 /**
 189  * if_usb_probe - sets the configuration values
 190  * @intf:       &usb_interface pointer
 191  * @id: pointer to usb_device_id
 192  * returns:     0 on success, error code on failure
 193  */
 194 static int if_usb_probe(struct usb_interface *intf,
 195                         const struct usb_device_id *id)
 196 {
 197         struct usb_device *udev;
 198         struct usb_host_interface *iface_desc;
 199         struct usb_endpoint_descriptor *endpoint;
 200         struct lbs_private *priv;
 201         struct if_usb_card *cardp;
 202         int r = -ENOMEM;
 203         int i;
 204
 205         udev = interface_to_usbdev(intf);
 206
 207         cardp = kzalloc(sizeof(struct if_usb_card), GFP_KERNEL);
 208         if (!cardp)
 209                 goto error;
 210
 211         setup_timer(&cardp->fw_timeout, if_usb_fw_timeo, (unsigned long)cardp);
 212         init_waitqueue_head(&cardp->fw_wq);
 213
 214         cardp->udev = udev;
 215         cardp->model = (uint32_t) id->driver_info;
 216         iface_desc = intf->cur_altsetting;
 217
 218         lbs_deb_usbd(&udev->dev, "bcdUSB = 0x%X bDeviceClass = 0x%X"
 219                      " bDeviceSubClass = 0x%X, bDeviceProtocol = 0x%X\n",
 220                      le16_to_cpu(udev->descriptor.bcdUSB),
 221                      udev->descriptor.bDeviceClass,
 222                      udev->descriptor.bDeviceSubClass,
 223                      udev->descriptor.bDeviceProtocol);
 224
 225         for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
 226                 endpoint = &iface_desc->endpoint[i].desc;
 227                 if (usb_endpoint_is_bulk_in(endpoint)) {
 228                         cardp->ep_in_size = le16_to_cpu(endpoint->wMaxPacketSize);
 229                         cardp->ep_in = usb_endpoint_num(endpoint);
 230
 231                         lbs_deb_usbd(&udev->dev, "in_endpoint = %d\n", cardp->ep_in);
 232                         lbs_deb_usbd(&udev->dev, "Bulk in size is %d\n", cardp->ep_in_size);
 233
 234                 } else if (usb_endpoint_is_bulk_out(endpoint)) {
 235                         cardp->ep_out_size = le16_to_cpu(endpoint->wMaxPacketSize);
 236                         cardp->ep_out = usb_endpoint_num(endpoint);
 237
 238                         lbs_deb_usbd(&udev->dev, "out_endpoint = %d\n", cardp->ep_out);
 239                         lbs_deb_usbd(&udev->dev, "Bulk out size is %d\n", cardp->ep_out_size);
 240                 }
 241         }
 242         if (!cardp->ep_out_size || !cardp->ep_in_size) {
 243                 lbs_deb_usbd(&udev->dev, "Endpoints not found\n");
 244                 goto dealloc;
 245         }
 246         if (!(cardp->rx_urb = usb_alloc_urb(0, GFP_KERNEL))) {
 247                 lbs_deb_usbd(&udev->dev, "Rx URB allocation failed\n");
 248                 goto dealloc;
 249         }
 250         if (!(cardp->tx_urb = usb_alloc_urb(0, GFP_KERNEL))) {
 251                 lbs_deb_usbd(&udev->dev, "Tx URB allocation failed\n");
 252                 goto dealloc;
 253         }
 254         cardp->ep_out_buf = kmalloc(MRVDRV_ETH_TX_PACKET_BUFFER_SIZE, GFP_KERNEL);
 255         if (!cardp->ep_out_buf) {
 256                 lbs_deb_usbd(&udev->dev, "Could not allocate buffer\n");
 257                 goto dealloc;
 258         }
 259
 260         if (!(priv = lbs_add_card(cardp, &intf->dev)))
 261                 goto err_add_card;
 262
 263         cardp->priv = priv;
 264
 265         priv->hw_host_to_card = if_usb_host_to_card;
 266         priv->enter_deep_sleep = NULL;
 267         priv->exit_deep_sleep = NULL;
 268         priv->reset_deep_sleep_wakeup = NULL;
 269 #ifdef CONFIG_OLPC
 270         if (machine_is_olpc())
 271                 priv->reset_card = if_usb_reset_olpc_card;
 272 #endif
 273
 274         cardp->boot2_version = udev->descriptor.bcdDevice;
 275
 276         usb_get_dev(udev);
 277         usb_set_intfdata(intf, cardp);
 278
 279         r = lbs_get_firmware_async(priv, &udev->dev, cardp->model,
 280                                    fw_table, if_usb_prog_firmware);
 281         if (r)
 282                 goto err_get_fw;
 283
 284         return 0;
 285
 286 err_get_fw:
 287         lbs_remove_card(priv);
 288 err_add_card:
 289         if_usb_reset_device(cardp);
 290 dealloc:
 291         if_usb_free(cardp);
 292
 293 error:
 294         return r;
 295 }
 296
 297 /**
 298  * if_usb_disconnect - free resource and cleanup
 299  * @intf:       USB interface structure
 300  * returns:     N/A
 301  */
 302 static void if_usb_disconnect(struct usb_interface *intf)
 303 {
 304         struct if_usb_card *cardp = usb_get_intfdata(intf);
 305         struct lbs_private *priv = (struct lbs_private *) cardp->priv;
 306
 307         lbs_deb_enter(LBS_DEB_MAIN);
 308
 309         cardp->surprise_removed = 1;
 310
 311         if (priv) {
 312                 priv->surpriseremoved = 1;
 313                 lbs_stop_card(priv);
 314                 lbs_remove_card(priv);
 315         }
 316
 317         /* Unlink and free urb */
 318         if_usb_free(cardp);
 319
 320         usb_set_intfdata(intf, NULL);
 321         usb_put_dev(interface_to_usbdev(intf));
 322
 323         lbs_deb_leave(LBS_DEB_MAIN);
 324 }
 325
 326 /**
 327  * if_usb_send_fw_pkt - download FW
 328  * @cardp:      pointer to &struct if_usb_card
 329  * returns:     0
 330  */
 331 static int if_usb_send_fw_pkt(struct if_usb_card *cardp)
 332 {
 333         struct fwdata *fwdata = cardp->ep_out_buf;
 334         const uint8_t *firmware = cardp->fw->data;
 335
 336         /* If we got a CRC failure on the last block, back
 337            up and retry it */
 338         if (!cardp->CRC_OK) {
 339                 cardp->totalbytes = cardp->fwlastblksent;
 340                 cardp->fwseqnum--;
 341         }
 342
 343         lbs_deb_usb2(&cardp->udev->dev, "totalbytes = %d\n",
 344                      cardp->totalbytes);
 345
 346         /* struct fwdata (which we sent to the card) has an
 347            extra __le32 field in between the header and the data,
 348            which is not in the struct fwheader in the actual
 349            firmware binary. Insert the seqnum in the middle... */
 350         memcpy(&fwdata->hdr, &firmware[cardp->totalbytes],
 351                sizeof(struct fwheader));
 352
 353         cardp->fwlastblksent = cardp->totalbytes;
 354         cardp->totalbytes += sizeof(struct fwheader);
 355
 356         memcpy(fwdata->data, &firmware[cardp->totalbytes],
 357                le32_to_cpu(fwdata->hdr.datalength));
 358
 359         lbs_deb_usb2(&cardp->udev->dev, "Data length = %d\n",
 360                      le32_to_cpu(fwdata->hdr.datalength));
 361
 362         fwdata->seqnum = cpu_to_le32(++cardp->fwseqnum);
 363         cardp->totalbytes += le32_to_cpu(fwdata->hdr.datalength);
 364
 365         usb_tx_block(cardp, cardp->ep_out_buf, sizeof(struct fwdata) +
 366                      le32_to_cpu(fwdata->hdr.datalength));
 367
 368         if (fwdata->hdr.dnldcmd == cpu_to_le32(FW_HAS_DATA_TO_RECV)) {
 369                 lbs_deb_usb2(&cardp->udev->dev, "There are data to follow\n");
 370                 lbs_deb_usb2(&cardp->udev->dev, "seqnum = %d totalbytes = %d\n",
 371                              cardp->fwseqnum, cardp->totalbytes);
 372         } else if (fwdata->hdr.dnldcmd == cpu_to_le32(FW_HAS_LAST_BLOCK)) {
 373                 lbs_deb_usb2(&cardp->udev->dev, "Host has finished FW downloading\n");
 374                 lbs_deb_usb2(&cardp->udev->dev, "Donwloading FW JUMP BLOCK\n");
 375
 376                 cardp->fwfinalblk = 1;
 377         }
 378
 379         lbs_deb_usb2(&cardp->udev->dev, "Firmware download done; size %d\n",
 380                      cardp->totalbytes);
 381
 382         return 0;
 383 }
 384
 385 static int if_usb_reset_device(struct if_usb_card *cardp)
 386 {
 387         struct cmd_header *cmd = cardp->ep_out_buf + 4;
 388         int ret;
 389
 390         lbs_deb_enter(LBS_DEB_USB);
 391
 392         *(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_REQUEST);
 393
 394         cmd->command = cpu_to_le16(CMD_802_11_RESET);
 395         cmd->size = cpu_to_le16(sizeof(cmd));
 396         cmd->result = cpu_to_le16(0);
 397         cmd->seqnum = cpu_to_le16(0x5a5a);
 398         usb_tx_block(cardp, cardp->ep_out_buf, 4 + sizeof(struct cmd_header));
 399
 400         msleep(100);
 401         ret = usb_reset_device(cardp->udev);
 402         msleep(100);
 403
 404 #ifdef CONFIG_OLPC
 405         if (ret && machine_is_olpc())
 406                 if_usb_reset_olpc_card(NULL);
 407 #endif
 408
 409         lbs_deb_leave_args(LBS_DEB_USB, "ret %d", ret);
 410
 411         return ret;
 412 }
 413
 414 /**
 415  *  usb_tx_block - transfer the data to the device
 416  *  @cardp:     pointer to &struct if_usb_card
 417  *  @payload:   pointer to payload data
 418  *  @nb:        data length
 419  *  returns:    0 for success or negative error code
 420  */
 421 static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload, uint16_t nb)
 422 {
 423         int ret;
 424
 425         /* check if device is removed */
 426         if (cardp->surprise_removed) {
 427                 lbs_deb_usbd(&cardp->udev->dev, "Device removed\n");
 428                 ret = -ENODEV;
 429                 goto tx_ret;
 430         }
 431
 432         usb_fill_bulk_urb(cardp->tx_urb, cardp->udev,
 433                           usb_sndbulkpipe(cardp->udev,
 434                                           cardp->ep_out),
 435                           payload, nb, if_usb_write_bulk_callback, cardp);
 436
 437         cardp->tx_urb->transfer_flags |= URB_ZERO_PACKET;
 438
 439         if ((ret = usb_submit_urb(cardp->tx_urb, GFP_ATOMIC))) {
 440                 lbs_deb_usbd(&cardp->udev->dev, "usb_submit_urb failed: %d\n", ret);
 441         } else {
 442                 lbs_deb_usb2(&cardp->udev->dev, "usb_submit_urb success\n");
 443                 ret = 0;
 444         }
 445
 446 tx_ret:
 447         return ret;
 448 }
 449
 450 static int __if_usb_submit_rx_urb(struct if_usb_card *cardp,
 451                                   void (*callbackfn)(struct urb *urb))
 452 {
 453         struct sk_buff *skb;
 454         int ret = -1;
 455
 456         if (!(skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE))) {
 457                 pr_err("No free skb\n");
 458                 goto rx_ret;
 459         }
 460
 461         cardp->rx_skb = skb;
 462
 463         /* Fill the receive configuration URB and initialise the Rx call back */
 464         usb_fill_bulk_urb(cardp->rx_urb, cardp->udev,
 465                           usb_rcvbulkpipe(cardp->udev, cardp->ep_in),
 466                           skb->data + IPFIELD_ALIGN_OFFSET,
 467                           MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn,
 468                           cardp);
 469
 470         cardp->rx_urb->transfer_flags |= URB_ZERO_PACKET;
 471
 472         lbs_deb_usb2(&cardp->udev->dev, "Pointer for rx_urb %p\n", cardp->rx_urb);
 473         if ((ret = usb_submit_urb(cardp->rx_urb, GFP_ATOMIC))) {
 474                 lbs_deb_usbd(&cardp->udev->dev, "Submit Rx URB failed: %d\n", ret);
 475                 kfree_skb(skb);
 476                 cardp->rx_skb = NULL;
 477                 ret = -1;
 478         } else {
 479                 lbs_deb_usb2(&cardp->udev->dev, "Submit Rx URB success\n");
 480                 ret = 0;
 481         }
 482
 483 rx_ret:
 484         return ret;
 485 }
 486
 487 static int if_usb_submit_rx_urb_fwload(struct if_usb_card *cardp)
 488 {
 489         return __if_usb_submit_rx_urb(cardp, &if_usb_receive_fwload);
 490 }
 491
 492 static int if_usb_submit_rx_urb(struct if_usb_card *cardp)
 493 {
 494         return __if_usb_submit_rx_urb(cardp, &if_usb_receive);
 495 }
 496
 497 static void if_usb_receive_fwload(struct urb *urb)
 498 {
 499         struct if_usb_card *cardp = urb->context;
 500         struct sk_buff *skb = cardp->rx_skb;
 501         struct fwsyncheader *syncfwheader;
 502         struct bootcmdresp bootcmdresp;
 503
 504         if (urb->status) {
 505                 lbs_deb_usbd(&cardp->udev->dev,
 506                              "URB status is failed during fw load\n");
 507                 kfree_skb(skb);
 508                 return;
 509         }
 510
 511         if (cardp->fwdnldover) {
 512                 __le32 *tmp = (__le32 *)(skb->data + IPFIELD_ALIGN_OFFSET);
 513
 514                 if (tmp[0] == cpu_to_le32(CMD_TYPE_INDICATION) &&
 515                     tmp[1] == cpu_to_le32(MACREG_INT_CODE_FIRMWARE_READY)) {
 516                         pr_info("Firmware ready event received\n");
 517                         wake_up(&cardp->fw_wq);
 518                 } else {
 519                         lbs_deb_usb("Waiting for confirmation; got %x %x\n",
 520                                     le32_to_cpu(tmp[0]), le32_to_cpu(tmp[1]));
 521                         if_usb_submit_rx_urb_fwload(cardp);
 522                 }
 523                 kfree_skb(skb);
 524                 return;
 525         }
 526         if (cardp->bootcmdresp <= 0) {
 527                 memcpy (&bootcmdresp, skb->data + IPFIELD_ALIGN_OFFSET,
 528                         sizeof(bootcmdresp));
 529
 530                 if (le16_to_cpu(cardp->udev->descriptor.bcdDevice) < 0x3106) {
 531                         kfree_skb(skb);
 532                         if_usb_submit_rx_urb_fwload(cardp);
 533                         cardp->bootcmdresp = BOOT_CMD_RESP_OK;
 534                         lbs_deb_usbd(&cardp->udev->dev,
 535                                      "Received valid boot command response\n");
 536                         return;
 537                 }
 538                 if (bootcmdresp.magic != cpu_to_le32(BOOT_CMD_MAGIC_NUMBER)) {
 539                         if (bootcmdresp.magic == cpu_to_le32(CMD_TYPE_REQUEST) ||
 540                             bootcmdresp.magic == cpu_to_le32(CMD_TYPE_DATA) ||
 541                             bootcmdresp.magic == cpu_to_le32(CMD_TYPE_INDICATION)) {
 542                                 if (!cardp->bootcmdresp)
 543                                         pr_info("Firmware already seems alive; resetting\n");
 544                                 cardp->bootcmdresp = -1;
 545                         } else {
 546                                 pr_info("boot cmd response wrong magic number (0x%x)\n",
 547                                             le32_to_cpu(bootcmdresp.magic));
 548                         }
 549                 } else if ((bootcmdresp.cmd != BOOT_CMD_FW_BY_USB) &&
 550                            (bootcmdresp.cmd != BOOT_CMD_UPDATE_FW) &&
 551                            (bootcmdresp.cmd != BOOT_CMD_UPDATE_BOOT2)) {
 552                         pr_info("boot cmd response cmd_tag error (%d)\n",
 553                                 bootcmdresp.cmd);
 554                 } else if (bootcmdresp.result != BOOT_CMD_RESP_OK) {
 555                         pr_info("boot cmd response result error (%d)\n",
 556                                 bootcmdresp.result);
 557                 } else {
 558                         cardp->bootcmdresp = 1;
 559                         lbs_deb_usbd(&cardp->udev->dev,
 560                                      "Received valid boot command response\n");
 561                 }
 562                 kfree_skb(skb);
 563                 if_usb_submit_rx_urb_fwload(cardp);
 564                 return;
 565         }
 566
 567         syncfwheader = kmemdup(skb->data + IPFIELD_ALIGN_OFFSET,
 568                                sizeof(struct fwsyncheader), GFP_ATOMIC);
 569         if (!syncfwheader) {
 570                 lbs_deb_usbd(&cardp->udev->dev, "Failure to allocate syncfwheader\n");
 571                 kfree_skb(skb);
 572                 return;
 573         }
 574
 575         if (!syncfwheader->cmd) {
 576                 lbs_deb_usb2(&cardp->udev->dev, "FW received Blk with correct CRC\n");
 577                 lbs_deb_usb2(&cardp->udev->dev, "FW received Blk seqnum = %d\n",
 578                              le32_to_cpu(syncfwheader->seqnum));
 579                 cardp->CRC_OK = 1;
 580         } else {
 581                 lbs_deb_usbd(&cardp->udev->dev, "FW received Blk with CRC error\n");
 582                 cardp->CRC_OK = 0;
 583         }
 584
 585         kfree_skb(skb);
 586
 587         /* Give device 5s to either write firmware to its RAM or eeprom */
 588         mod_timer(&cardp->fw_timeout, jiffies + (HZ*5));
 589
 590         if (cardp->fwfinalblk) {
 591                 cardp->fwdnldover = 1;
 592                 goto exit;
 593         }
 594
 595         if_usb_send_fw_pkt(cardp);
 596
 597  exit:
 598         if_usb_submit_rx_urb_fwload(cardp);
 599
 600         kfree(syncfwheader);
 601 }
 602
 603 #define MRVDRV_MIN_PKT_LEN      30
 604
 605 static inline void process_cmdtypedata(int recvlength, struct sk_buff *skb,
 606                                        struct if_usb_card *cardp,
 607                                        struct lbs_private *priv)
 608 {
 609         if (recvlength > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE + MESSAGE_HEADER_LEN
 610             || recvlength < MRVDRV_MIN_PKT_LEN) {
 611                 lbs_deb_usbd(&cardp->udev->dev, "Packet length is Invalid\n");
 612                 kfree_skb(skb);
 613                 return;
 614         }
 615
 616         skb_reserve(skb, IPFIELD_ALIGN_OFFSET);
 617         skb_put(skb, recvlength);
 618         skb_pull(skb, MESSAGE_HEADER_LEN);
 619
 620         lbs_process_rxed_packet(priv, skb);
 621 }
 622
 623 static inline void process_cmdrequest(int recvlength, uint8_t *recvbuff,
 624                                       struct sk_buff *skb,
 625                                       struct if_usb_card *cardp,
 626                                       struct lbs_private *priv)
 627 {
 628         u8 i;
 629
 630         if (recvlength > LBS_CMD_BUFFER_SIZE) {
 631                 lbs_deb_usbd(&cardp->udev->dev,
 632                              "The receive buffer is too large\n");
 633                 kfree_skb(skb);
 634                 return;
 635         }
 636
 637         BUG_ON(!in_interrupt());
 638
 639         spin_lock(&priv->driver_lock);
 640
 641         i = (priv->resp_idx == 0) ? 1 : 0;
 642         BUG_ON(priv->resp_len[i]);
 643         priv->resp_len[i] = (recvlength - MESSAGE_HEADER_LEN);
 644         memcpy(priv->resp_buf[i], recvbuff + MESSAGE_HEADER_LEN,
 645                 priv->resp_len[i]);
 646         kfree_skb(skb);
 647         lbs_notify_command_response(priv, i);
 648
 649         spin_unlock(&priv->driver_lock);
 650
 651         lbs_deb_usbd(&cardp->udev->dev,
 652                     "Wake up main thread to handle cmd response\n");
 653 }
 654
 655 /**
 656  *  if_usb_receive - read the packet into the upload buffer,
 657  *  wake up the main thread and initialise the Rx callack
 658  *
 659  *  @urb:       pointer to &struct urb
 660  *  returns:    N/A
 661  */
 662 static void if_usb_receive(struct urb *urb)
 663 {
 664         struct if_usb_card *cardp = urb->context;
 665         struct sk_buff *skb = cardp->rx_skb;
 666         struct lbs_private *priv = cardp->priv;
 667         int recvlength = urb->actual_length;
 668         uint8_t *recvbuff = NULL;
 669         uint32_t recvtype = 0;
 670         __le32 *pkt = (__le32 *)(skb->data + IPFIELD_ALIGN_OFFSET);
 671         uint32_t event;
 672
 673         lbs_deb_enter(LBS_DEB_USB);
 674
 675         if (recvlength) {
 676                 if (urb->status) {
 677                         lbs_deb_usbd(&cardp->udev->dev, "RX URB failed: %d\n",
 678                                      urb->status);
 679                         kfree_skb(skb);
 680                         goto setup_for_next;
 681                 }
 682
 683                 recvbuff = skb->data + IPFIELD_ALIGN_OFFSET;
 684                 recvtype = le32_to_cpu(pkt[0]);
 685                 lbs_deb_usbd(&cardp->udev->dev,
 686                             "Recv length = 0x%x, Recv type = 0x%X\n",
 687                             recvlength, recvtype);
 688         } else if (urb->status) {
 689                 kfree_skb(skb);
 690                 goto rx_exit;
 691         }
 692
 693         switch (recvtype) {
 694         case CMD_TYPE_DATA:
 695                 process_cmdtypedata(recvlength, skb, cardp, priv);
 696                 break;
 697
 698         case CMD_TYPE_REQUEST:
 699                 process_cmdrequest(recvlength, recvbuff, skb, cardp, priv);
 700                 break;
 701
 702         case CMD_TYPE_INDICATION:
 703                 /* Event handling */
 704                 event = le32_to_cpu(pkt[1]);
 705                 lbs_deb_usbd(&cardp->udev->dev, "**EVENT** 0x%X\n", event);
 706                 kfree_skb(skb);
 707
 708                 /* Icky undocumented magic special case */
 709                 if (event & 0xffff0000) {
 710                         u32 trycount = (event & 0xffff0000) >> 16;
 711
 712                         lbs_send_tx_feedback(priv, trycount);
 713                 } else
 714                         lbs_queue_event(priv, event & 0xFF);
 715                 break;
 716
 717         default:
 718                 lbs_deb_usbd(&cardp->udev->dev, "Unknown command type 0x%X\n",
 719                              recvtype);
 720                 kfree_skb(skb);
 721                 break;
 722         }
 723
 724 setup_for_next:
 725         if_usb_submit_rx_urb(cardp);
 726 rx_exit:
 727         lbs_deb_leave(LBS_DEB_USB);
 728 }
 729
 730 /**
 731  *  if_usb_host_to_card - downloads data to FW
 732  *  @priv:      pointer to &struct lbs_private structure
 733  *  @type:      type of data
 734  *  @payload:   pointer to data buffer
 735  *  @nb:        number of bytes
 736  *  returns:    0 for success or negative error code
 737  */
 738 static int if_usb_host_to_card(struct lbs_private *priv, uint8_t type,
 739                                uint8_t *payload, uint16_t nb)
 740 {
 741         struct if_usb_card *cardp = priv->card;
 742
 743         lbs_deb_usbd(&cardp->udev->dev,"*** type = %u\n", type);
 744         lbs_deb_usbd(&cardp->udev->dev,"size after = %d\n", nb);
 745
 746         if (type == MVMS_CMD) {
 747                 *(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_REQUEST);
 748                 priv->dnld_sent = DNLD_CMD_SENT;
 749         } else {
 750                 *(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_DATA);
 751                 priv->dnld_sent = DNLD_DATA_SENT;
 752         }
 753
 754         memcpy((cardp->ep_out_buf + MESSAGE_HEADER_LEN), payload, nb);
 755
 756         return usb_tx_block(cardp, cardp->ep_out_buf, nb + MESSAGE_HEADER_LEN);
 757 }
 758
 759 /**
 760  *  if_usb_issue_boot_command - issues Boot command to the Boot2 code
 761  *  @cardp:     pointer to &if_usb_card
 762  *  @ivalue:    1:Boot from FW by USB-Download
 763  *              2:Boot from FW in EEPROM
 764  *  returns:    0 for success or negative error code
 765  */
 766 static int if_usb_issue_boot_command(struct if_usb_card *cardp, int ivalue)
 767 {
 768         struct bootcmd *bootcmd = cardp->ep_out_buf;
 769
 770         /* Prepare command */
 771         bootcmd->magic = cpu_to_le32(BOOT_CMD_MAGIC_NUMBER);
 772         bootcmd->cmd = ivalue;
 773         memset(bootcmd->pad, 0, sizeof(bootcmd->pad));
 774
 775         /* Issue command */
 776         usb_tx_block(cardp, cardp->ep_out_buf, sizeof(*bootcmd));
 777
 778         return 0;
 779 }
 780
 781
 782 /**
 783  *  check_fwfile_format - check the validity of Boot2/FW image
 784  *
 785  *  @data:      pointer to image
 786  *  @totlen:    image length
 787  *  returns:     0 (good) or 1 (failure)
 788  */
 789 static int check_fwfile_format(const uint8_t *data, uint32_t totlen)
 790 {
 791         uint32_t bincmd, exit;
 792         uint32_t blksize, offset, len;
 793         int ret;
 794
 795         ret = 1;
 796         exit = len = 0;
 797
 798         do {
 799                 struct fwheader *fwh = (void *)data;
 800
 801                 bincmd = le32_to_cpu(fwh->dnldcmd);
 802                 blksize = le32_to_cpu(fwh->datalength);
 803                 switch (bincmd) {
 804                 case FW_HAS_DATA_TO_RECV:
 805                         offset = sizeof(struct fwheader) + blksize;
 806                         data += offset;
 807                         len += offset;
 808                         if (len >= totlen)
 809                                 exit = 1;
 810                         break;
 811                 case FW_HAS_LAST_BLOCK:
 812                         exit = 1;
 813                         ret = 0;
 814                         break;
 815                 default:
 816                         exit = 1;
 817                         break;
 818                 }
 819         } while (!exit);
 820
 821         if (ret)
 822                 pr_err("firmware file format check FAIL\n");
 823         else
 824                 lbs_deb_fw("firmware file format check PASS\n");
 825
 826         return ret;
 827 }
 828
 829 static void if_usb_prog_firmware(struct lbs_private *priv, int ret,
 830                                  const struct firmware *fw,
 831                                  const struct firmware *unused)
 832 {
 833         struct if_usb_card *cardp = priv->card;
 834         int i = 0;
 835         static int reset_count = 10;
 836
 837         lbs_deb_enter(LBS_DEB_USB);
 838
 839         if (ret) {
 840                 pr_err("failed to find firmware (%d)\n", ret);
 841                 goto done;
 842         }
 843
 844         cardp->fw = fw;
 845         if (check_fwfile_format(cardp->fw->data, cardp->fw->size)) {
 846                 ret = -EINVAL;
 847                 goto release_fw;
 848         }
 849
 850         /* Cancel any pending usb business */
 851         usb_kill_urb(cardp->rx_urb);
 852         usb_kill_urb(cardp->tx_urb);
 853
 854         cardp->fwlastblksent = 0;
 855         cardp->fwdnldover = 0;
 856         cardp->totalbytes = 0;
 857         cardp->fwfinalblk = 0;
 858         cardp->bootcmdresp = 0;
 859
 860 restart:
 861         if (if_usb_submit_rx_urb_fwload(cardp) < 0) {
 862                 lbs_deb_usbd(&cardp->udev->dev, "URB submission is failed\n");
 863                 ret = -EIO;
 864                 goto release_fw;
 865         }
 866
 867         cardp->bootcmdresp = 0;
 868         do {
 869                 int j = 0;
 870                 i++;
 871                 if_usb_issue_boot_command(cardp, BOOT_CMD_FW_BY_USB);
 872                 /* wait for command response */
 873                 do {
 874                         j++;
 875                         msleep_interruptible(100);
 876                 } while (cardp->bootcmdresp == 0 && j < 10);
 877         } while (cardp->bootcmdresp == 0 && i < 5);
 878
 879         if (cardp->bootcmdresp == BOOT_CMD_RESP_NOT_SUPPORTED) {
 880                 /* Return to normal operation */
 881                 ret = -EOPNOTSUPP;
 882                 usb_kill_urb(cardp->rx_urb);
 883                 usb_kill_urb(cardp->tx_urb);
 884                 if (if_usb_submit_rx_urb(cardp) < 0)
 885                         ret = -EIO;
 886                 goto release_fw;
 887         } else if (cardp->bootcmdresp <= 0) {
 888                 if (--reset_count >= 0) {
 889                         if_usb_reset_device(cardp);
 890                         goto restart;
 891                 }
 892                 ret = -EIO;
 893                 goto release_fw;
 894         }
 895
 896         i = 0;
 897
 898         cardp->totalbytes = 0;
 899         cardp->fwlastblksent = 0;
 900         cardp->CRC_OK = 1;
 901         cardp->fwdnldover = 0;
 902         cardp->fwseqnum = -1;
 903         cardp->totalbytes = 0;
 904         cardp->fwfinalblk = 0;
 905
 906         /* Send the first firmware packet... */
 907         if_usb_send_fw_pkt(cardp);
 908
 909         /* ... and wait for the process to complete */
 910         wait_event_interruptible(cardp->fw_wq, cardp->surprise_removed || cardp->fwdnldover);
 911
 912         del_timer_sync(&cardp->fw_timeout);
 913         usb_kill_urb(cardp->rx_urb);
 914
 915         if (!cardp->fwdnldover) {
 916                 pr_info("failed to load fw, resetting device!\n");
 917                 if (--reset_count >= 0) {
 918                         if_usb_reset_device(cardp);
 919                         goto restart;
 920                 }
 921
 922                 pr_info("FW download failure, time = %d ms\n", i * 100);
 923                 ret = -EIO;
 924                 goto release_fw;
 925         }
 926
 927         cardp->priv->fw_ready = 1;
 928         if_usb_submit_rx_urb(cardp);
 929
 930         if (lbs_start_card(priv))
 931                 goto release_fw;
 932
 933         if_usb_setup_firmware(priv);
 934
 935         /*
 936          * EHS_REMOVE_WAKEUP is not supported on all versions of the firmware.
 937          */
 938         priv->wol_criteria = EHS_REMOVE_WAKEUP;
 939         if (lbs_host_sleep_cfg(priv, priv->wol_criteria, NULL))
 940                 priv->ehs_remove_supported = false;
 941
 942  release_fw:
 943         release_firmware(cardp->fw);
 944         cardp->fw = NULL;
 945
 946  done:
 947         lbs_deb_leave(LBS_DEB_USB);
 948 }
 949
 950
 951 #ifdef CONFIG_PM
 952 static int if_usb_suspend(struct usb_interface *intf, pm_message_t message)
 953 {
 954         struct if_usb_card *cardp = usb_get_intfdata(intf);
 955         struct lbs_private *priv = cardp->priv;
 956         int ret;
 957
 958         lbs_deb_enter(LBS_DEB_USB);
 959
 960         if (priv->psstate != PS_STATE_FULL_POWER) {
 961                 ret = -1;
 962                 goto out;
 963         }
 964
 965 #ifdef CONFIG_OLPC
 966         if (machine_is_olpc()) {
 967                 if (priv->wol_criteria == EHS_REMOVE_WAKEUP)
 968                         olpc_ec_wakeup_clear(EC_SCI_SRC_WLAN);
 969                 else
 970                         olpc_ec_wakeup_set(EC_SCI_SRC_WLAN);
 971         }
 972 #endif
 973
 974         ret = lbs_suspend(priv);
 975         if (ret)
 976                 goto out;
 977
 978         /* Unlink tx & rx urb */
 979         usb_kill_urb(cardp->tx_urb);
 980         usb_kill_urb(cardp->rx_urb);
 981
 982  out:
 983         lbs_deb_leave(LBS_DEB_USB);
 984         return ret;
 985 }
 986
 987 static int if_usb_resume(struct usb_interface *intf)
 988 {
 989         struct if_usb_card *cardp = usb_get_intfdata(intf);
 990         struct lbs_private *priv = cardp->priv;
 991
 992         lbs_deb_enter(LBS_DEB_USB);
 993
 994         if_usb_submit_rx_urb(cardp);
 995
 996         lbs_resume(priv);
 997
 998         lbs_deb_leave(LBS_DEB_USB);
 999         return 0;
1000 }
1001 #else
1002 #define if_usb_suspend NULL
1003 #define if_usb_resume NULL
1004 #endif
1005
1006 static struct usb_driver if_usb_driver = {
1007         .name = DRV_NAME,
1008         .probe = if_usb_probe,
1009         .disconnect = if_usb_disconnect,
1010         .id_table = if_usb_table,
1011         .suspend = if_usb_suspend,
1012         .resume = if_usb_resume,
1013         .reset_resume = if_usb_resume,
1014         .disable_hub_initiated_lpm = 1,
1015 };
1016
1017 module_usb_driver(if_usb_driver);
1018
1019 MODULE_DESCRIPTION("8388 USB WLAN Driver");
1020 MODULE_AUTHOR("Marvell International Ltd. and Red Hat, Inc.");
1021 MODULE_LICENSE("GPL");