2 * Marvell Wireless LAN device driver: CFG80211
4 * Copyright (C) 2011, Marvell International Ltd.
6 * This software file (the "File") is distributed by Marvell International
7 * Ltd. under the terms of the GNU General Public License Version 2, June 1991
8 * (the "License"). You may use, redistribute and/or modify this File in
9 * accordance with the terms and conditions of the License, a copy of which
10 * is available by writing to the Free Software Foundation, Inc.,
11 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
12 * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
14 * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
15 * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
16 * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
17 * this warranty disclaimer.
24 * This function maps the nl802.11 channel type into driver channel type.
26 * The mapping is as follows -
27 * NL80211_CHAN_NO_HT -> IEEE80211_HT_PARAM_CHA_SEC_NONE
28 * NL80211_CHAN_HT20 -> IEEE80211_HT_PARAM_CHA_SEC_NONE
29 * NL80211_CHAN_HT40PLUS -> IEEE80211_HT_PARAM_CHA_SEC_ABOVE
30 * NL80211_CHAN_HT40MINUS -> IEEE80211_HT_PARAM_CHA_SEC_BELOW
31 * Others -> IEEE80211_HT_PARAM_CHA_SEC_NONE
34 mwifiex_cfg80211_channel_type_to_sec_chan_offset(enum nl80211_channel_type
37 switch (channel_type
) {
38 case NL80211_CHAN_NO_HT
:
39 case NL80211_CHAN_HT20
:
40 return IEEE80211_HT_PARAM_CHA_SEC_NONE
;
41 case NL80211_CHAN_HT40PLUS
:
42 return IEEE80211_HT_PARAM_CHA_SEC_ABOVE
;
43 case NL80211_CHAN_HT40MINUS
:
44 return IEEE80211_HT_PARAM_CHA_SEC_BELOW
;
46 return IEEE80211_HT_PARAM_CHA_SEC_NONE
;
51 * This function checks whether WEP is set.
54 mwifiex_is_alg_wep(u32 cipher
)
57 case WLAN_CIPHER_SUITE_WEP40
:
58 case WLAN_CIPHER_SUITE_WEP104
:
68 * This function retrieves the private structure from kernel wiphy structure.
70 static void *mwifiex_cfg80211_get_priv(struct wiphy
*wiphy
)
72 return (void *) (*(unsigned long *) wiphy_priv(wiphy
));
76 * CFG802.11 operation handler to delete a network key.
79 mwifiex_cfg80211_del_key(struct wiphy
*wiphy
, struct net_device
*netdev
,
80 u8 key_index
, bool pairwise
, const u8
*mac_addr
)
82 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(netdev
);
84 if (mwifiex_set_encode(priv
, NULL
, 0, key_index
, 1)) {
85 wiphy_err(wiphy
, "deleting the crypto keys\n");
89 wiphy_dbg(wiphy
, "info: crypto keys deleted\n");
94 * CFG802.11 operation handler to set Tx power.
97 mwifiex_cfg80211_set_tx_power(struct wiphy
*wiphy
,
98 enum nl80211_tx_power_setting type
,
101 struct mwifiex_private
*priv
= mwifiex_cfg80211_get_priv(wiphy
);
102 struct mwifiex_power_cfg power_cfg
;
103 int dbm
= MBM_TO_DBM(mbm
);
105 if (type
== NL80211_TX_POWER_FIXED
) {
106 power_cfg
.is_power_auto
= 0;
107 power_cfg
.power_level
= dbm
;
109 power_cfg
.is_power_auto
= 1;
112 return mwifiex_set_tx_power(priv
, &power_cfg
);
116 * CFG802.11 operation handler to set Power Save option.
118 * The timeout value, if provided, is currently ignored.
121 mwifiex_cfg80211_set_power_mgmt(struct wiphy
*wiphy
,
122 struct net_device
*dev
,
123 bool enabled
, int timeout
)
125 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(dev
);
130 "info: ignore timeout value for IEEE Power Save\n");
134 return mwifiex_drv_set_power(priv
, &ps_mode
);
138 * CFG802.11 operation handler to set the default network key.
141 mwifiex_cfg80211_set_default_key(struct wiphy
*wiphy
, struct net_device
*netdev
,
142 u8 key_index
, bool unicast
,
145 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(netdev
);
147 /* Return if WEP key not configured */
148 if (!priv
->sec_info
.wep_enabled
)
151 if (mwifiex_set_encode(priv
, NULL
, 0, key_index
, 0)) {
152 wiphy_err(wiphy
, "set default Tx key index\n");
160 * CFG802.11 operation handler to add a network key.
163 mwifiex_cfg80211_add_key(struct wiphy
*wiphy
, struct net_device
*netdev
,
164 u8 key_index
, bool pairwise
, const u8
*mac_addr
,
165 struct key_params
*params
)
167 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(netdev
);
169 if (mwifiex_set_encode(priv
, params
->key
, params
->key_len
,
171 wiphy_err(wiphy
, "crypto keys added\n");
179 * This function sends domain information to the firmware.
181 * The following information are passed to the firmware -
183 * - Sub bands (first channel, number of channels, maximum Tx power)
185 static int mwifiex_send_domain_info_cmd_fw(struct wiphy
*wiphy
)
187 u8 no_of_triplet
= 0;
188 struct ieee80211_country_ie_triplet
*t
;
189 u8 no_of_parsed_chan
= 0;
190 u8 first_chan
= 0, next_chan
= 0, max_pwr
= 0;
192 enum ieee80211_band band
;
193 struct ieee80211_supported_band
*sband
;
194 struct ieee80211_channel
*ch
;
195 struct mwifiex_private
*priv
= mwifiex_cfg80211_get_priv(wiphy
);
196 struct mwifiex_adapter
*adapter
= priv
->adapter
;
197 struct mwifiex_802_11d_domain_reg
*domain_info
= &adapter
->domain_reg
;
199 /* Set country code */
200 domain_info
->country_code
[0] = priv
->country_code
[0];
201 domain_info
->country_code
[1] = priv
->country_code
[1];
202 domain_info
->country_code
[2] = ' ';
204 band
= mwifiex_band_to_radio_type(adapter
->config_bands
);
205 if (!wiphy
->bands
[band
]) {
206 wiphy_err(wiphy
, "11D: setting domain info in FW\n");
210 sband
= wiphy
->bands
[band
];
212 for (i
= 0; i
< sband
->n_channels
; i
++) {
213 ch
= &sband
->channels
[i
];
214 if (ch
->flags
& IEEE80211_CHAN_DISABLED
)
219 first_chan
= (u32
) ch
->hw_value
;
220 next_chan
= first_chan
;
221 max_pwr
= ch
->max_power
;
222 no_of_parsed_chan
= 1;
226 if (ch
->hw_value
== next_chan
+ 1 &&
227 ch
->max_power
== max_pwr
) {
231 t
= &domain_info
->triplet
[no_of_triplet
];
232 t
->chans
.first_channel
= first_chan
;
233 t
->chans
.num_channels
= no_of_parsed_chan
;
234 t
->chans
.max_power
= max_pwr
;
236 first_chan
= (u32
) ch
->hw_value
;
237 next_chan
= first_chan
;
238 max_pwr
= ch
->max_power
;
239 no_of_parsed_chan
= 1;
244 t
= &domain_info
->triplet
[no_of_triplet
];
245 t
->chans
.first_channel
= first_chan
;
246 t
->chans
.num_channels
= no_of_parsed_chan
;
247 t
->chans
.max_power
= max_pwr
;
251 domain_info
->no_of_triplet
= no_of_triplet
;
253 if (mwifiex_send_cmd_async(priv
, HostCmd_CMD_802_11D_DOMAIN_INFO
,
254 HostCmd_ACT_GEN_SET
, 0, NULL
)) {
255 wiphy_err(wiphy
, "11D: setting domain info in FW\n");
263 * CFG802.11 regulatory domain callback function.
265 * This function is called when the regulatory domain is changed due to the
266 * following reasons -
268 * - Set by system core
270 * - Set bt Country IE
272 static int mwifiex_reg_notifier(struct wiphy
*wiphy
,
273 struct regulatory_request
*request
)
275 struct mwifiex_private
*priv
= mwifiex_cfg80211_get_priv(wiphy
);
277 wiphy_dbg(wiphy
, "info: cfg80211 regulatory domain callback for domain"
278 " %c%c\n", request
->alpha2
[0], request
->alpha2
[1]);
280 memcpy(priv
->country_code
, request
->alpha2
, sizeof(request
->alpha2
));
282 switch (request
->initiator
) {
283 case NL80211_REGDOM_SET_BY_DRIVER
:
284 case NL80211_REGDOM_SET_BY_CORE
:
285 case NL80211_REGDOM_SET_BY_USER
:
287 /* Todo: apply driver specific changes in channel flags based
288 on the request initiator if necessary. */
289 case NL80211_REGDOM_SET_BY_COUNTRY_IE
:
292 mwifiex_send_domain_info_cmd_fw(wiphy
);
298 * This function sets the RF channel.
300 * This function creates multiple IOCTL requests, populates them accordingly
301 * and issues them to set the band/channel and frequency.
304 mwifiex_set_rf_channel(struct mwifiex_private
*priv
,
305 struct ieee80211_channel
*chan
,
306 enum nl80211_channel_type channel_type
)
308 struct mwifiex_chan_freq_power cfp
;
309 u32 config_bands
= 0;
310 struct wiphy
*wiphy
= priv
->wdev
->wiphy
;
311 struct mwifiex_adapter
*adapter
= priv
->adapter
;
314 /* Set appropriate bands */
315 if (chan
->band
== IEEE80211_BAND_2GHZ
) {
316 if (channel_type
== NL80211_CHAN_NO_HT
)
317 if (priv
->adapter
->config_bands
== BAND_B
||
318 priv
->adapter
->config_bands
== BAND_G
)
320 priv
->adapter
->config_bands
;
322 config_bands
= BAND_B
| BAND_G
;
324 config_bands
= BAND_B
| BAND_G
| BAND_GN
;
326 if (channel_type
== NL80211_CHAN_NO_HT
)
327 config_bands
= BAND_A
;
329 config_bands
= BAND_AN
| BAND_A
;
332 if (!((config_bands
| adapter
->fw_bands
) &
333 ~adapter
->fw_bands
)) {
334 adapter
->config_bands
= config_bands
;
335 if (priv
->bss_mode
== NL80211_IFTYPE_ADHOC
) {
336 adapter
->adhoc_start_band
= config_bands
;
337 if ((config_bands
& BAND_GN
) ||
338 (config_bands
& BAND_AN
))
339 adapter
->adhoc_11n_enabled
= true;
341 adapter
->adhoc_11n_enabled
= false;
344 adapter
->sec_chan_offset
=
345 mwifiex_cfg80211_channel_type_to_sec_chan_offset
347 adapter
->channel_type
= channel_type
;
349 mwifiex_send_domain_info_cmd_fw(wiphy
);
352 wiphy_dbg(wiphy
, "info: setting band %d, chan offset %d, mode %d\n",
353 config_bands
, adapter
->sec_chan_offset
, priv
->bss_mode
);
357 memset(&cfp
, 0, sizeof(cfp
));
358 cfp
.freq
= chan
->center_freq
;
359 cfp
.channel
= ieee80211_frequency_to_channel(chan
->center_freq
);
361 if (mwifiex_bss_set_channel(priv
, &cfp
))
364 return mwifiex_drv_change_adhoc_chan(priv
, cfp
.channel
);
368 * CFG802.11 operation handler to set channel.
370 * This function can only be used when station is not connected.
373 mwifiex_cfg80211_set_channel(struct wiphy
*wiphy
, struct net_device
*dev
,
374 struct ieee80211_channel
*chan
,
375 enum nl80211_channel_type channel_type
)
377 struct mwifiex_private
*priv
;
380 priv
= mwifiex_netdev_get_priv(dev
);
382 priv
= mwifiex_cfg80211_get_priv(wiphy
);
384 if (priv
->media_connected
) {
385 wiphy_err(wiphy
, "This setting is valid only when station "
386 "is not connected\n");
390 return mwifiex_set_rf_channel(priv
, chan
, channel_type
);
394 * This function sets the fragmentation threshold.
396 * The fragmentation threshold value must lie between MWIFIEX_FRAG_MIN_VALUE
397 * and MWIFIEX_FRAG_MAX_VALUE.
400 mwifiex_set_frag(struct mwifiex_private
*priv
, u32 frag_thr
)
404 if (frag_thr
< MWIFIEX_FRAG_MIN_VALUE
||
405 frag_thr
> MWIFIEX_FRAG_MAX_VALUE
)
408 /* Send request to firmware */
409 ret
= mwifiex_send_cmd_sync(priv
, HostCmd_CMD_802_11_SNMP_MIB
,
410 HostCmd_ACT_GEN_SET
, FRAG_THRESH_I
,
417 * This function sets the RTS threshold.
419 * The rts value must lie between MWIFIEX_RTS_MIN_VALUE
420 * and MWIFIEX_RTS_MAX_VALUE.
423 mwifiex_set_rts(struct mwifiex_private
*priv
, u32 rts_thr
)
425 if (rts_thr
< MWIFIEX_RTS_MIN_VALUE
|| rts_thr
> MWIFIEX_RTS_MAX_VALUE
)
426 rts_thr
= MWIFIEX_RTS_MAX_VALUE
;
428 return mwifiex_send_cmd_sync(priv
, HostCmd_CMD_802_11_SNMP_MIB
,
429 HostCmd_ACT_GEN_SET
, RTS_THRESH_I
,
434 * CFG802.11 operation handler to set wiphy parameters.
436 * This function can be used to set the RTS threshold and the
437 * Fragmentation threshold of the driver.
440 mwifiex_cfg80211_set_wiphy_params(struct wiphy
*wiphy
, u32 changed
)
442 struct mwifiex_private
*priv
= mwifiex_cfg80211_get_priv(wiphy
);
445 if (changed
& WIPHY_PARAM_RTS_THRESHOLD
) {
446 ret
= mwifiex_set_rts(priv
, wiphy
->rts_threshold
);
451 if (changed
& WIPHY_PARAM_FRAG_THRESHOLD
)
452 ret
= mwifiex_set_frag(priv
, wiphy
->frag_threshold
);
458 * CFG802.11 operation handler to change interface type.
461 mwifiex_cfg80211_change_virtual_intf(struct wiphy
*wiphy
,
462 struct net_device
*dev
,
463 enum nl80211_iftype type
, u32
*flags
,
464 struct vif_params
*params
)
467 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(dev
);
469 if (priv
->bss_mode
== type
) {
470 wiphy_warn(wiphy
, "already set to required type\n");
474 priv
->bss_mode
= type
;
477 case NL80211_IFTYPE_ADHOC
:
478 dev
->ieee80211_ptr
->iftype
= NL80211_IFTYPE_ADHOC
;
479 wiphy_dbg(wiphy
, "info: setting interface type to adhoc\n");
481 case NL80211_IFTYPE_STATION
:
482 dev
->ieee80211_ptr
->iftype
= NL80211_IFTYPE_STATION
;
483 wiphy_dbg(wiphy
, "info: setting interface type to managed\n");
485 case NL80211_IFTYPE_UNSPECIFIED
:
486 dev
->ieee80211_ptr
->iftype
= NL80211_IFTYPE_STATION
;
487 wiphy_dbg(wiphy
, "info: setting interface type to auto\n");
490 wiphy_err(wiphy
, "unknown interface type: %d\n", type
);
494 mwifiex_deauthenticate(priv
, NULL
);
496 priv
->sec_info
.authentication_mode
= NL80211_AUTHTYPE_OPEN_SYSTEM
;
498 ret
= mwifiex_send_cmd_sync(priv
, HostCmd_CMD_SET_BSS_MODE
,
499 HostCmd_ACT_GEN_SET
, 0, NULL
);
505 * This function dumps the station information on a buffer.
507 * The following information are shown -
508 * - Total bytes transmitted
509 * - Total bytes received
510 * - Total packets transmitted
511 * - Total packets received
512 * - Signal quality level
513 * - Transmission rate
516 mwifiex_dump_station_info(struct mwifiex_private
*priv
,
517 struct station_info
*sinfo
)
519 struct mwifiex_ds_get_signal signal
;
520 struct mwifiex_rate_cfg rate
;
523 sinfo
->filled
= STATION_INFO_RX_BYTES
| STATION_INFO_TX_BYTES
|
524 STATION_INFO_RX_PACKETS
|
525 STATION_INFO_TX_PACKETS
526 | STATION_INFO_SIGNAL
| STATION_INFO_TX_BITRATE
;
528 /* Get signal information from the firmware */
529 memset(&signal
, 0, sizeof(struct mwifiex_ds_get_signal
));
530 if (mwifiex_get_signal_info(priv
, &signal
)) {
531 dev_err(priv
->adapter
->dev
, "getting signal information\n");
535 if (mwifiex_drv_get_data_rate(priv
, &rate
)) {
536 dev_err(priv
->adapter
->dev
, "getting data rate\n");
540 /* Get DTIM period information from firmware */
541 mwifiex_send_cmd_sync(priv
, HostCmd_CMD_802_11_SNMP_MIB
,
542 HostCmd_ACT_GEN_GET
, DTIM_PERIOD_I
,
546 * Bit 0 in tx_htinfo indicates that current Tx rate is 11n rate. Valid
547 * MCS index values for us are 0 to 7.
549 if ((priv
->tx_htinfo
& BIT(0)) && (priv
->tx_rate
< 8)) {
550 sinfo
->txrate
.mcs
= priv
->tx_rate
;
551 sinfo
->txrate
.flags
|= RATE_INFO_FLAGS_MCS
;
553 if (priv
->tx_htinfo
& BIT(1))
554 sinfo
->txrate
.flags
|= RATE_INFO_FLAGS_40_MHZ_WIDTH
;
556 if (priv
->tx_htinfo
& BIT(2))
557 sinfo
->txrate
.flags
|= RATE_INFO_FLAGS_SHORT_GI
;
560 sinfo
->rx_bytes
= priv
->stats
.rx_bytes
;
561 sinfo
->tx_bytes
= priv
->stats
.tx_bytes
;
562 sinfo
->rx_packets
= priv
->stats
.rx_packets
;
563 sinfo
->tx_packets
= priv
->stats
.tx_packets
;
564 sinfo
->signal
= priv
->qual_level
;
565 /* bit rate is in 500 kb/s units. Convert it to 100kb/s units */
566 sinfo
->txrate
.legacy
= rate
.rate
* 5;
568 if (priv
->bss_mode
== NL80211_IFTYPE_STATION
) {
569 sinfo
->filled
|= STATION_INFO_BSS_PARAM
;
570 sinfo
->bss_param
.flags
= 0;
571 if (priv
->curr_bss_params
.bss_descriptor
.cap_info_bitmap
&
572 WLAN_CAPABILITY_SHORT_PREAMBLE
)
573 sinfo
->bss_param
.flags
|=
574 BSS_PARAM_FLAGS_SHORT_PREAMBLE
;
575 if (priv
->curr_bss_params
.bss_descriptor
.cap_info_bitmap
&
576 WLAN_CAPABILITY_SHORT_SLOT_TIME
)
577 sinfo
->bss_param
.flags
|=
578 BSS_PARAM_FLAGS_SHORT_SLOT_TIME
;
579 sinfo
->bss_param
.dtim_period
= priv
->dtim_period
;
580 sinfo
->bss_param
.beacon_interval
=
581 priv
->curr_bss_params
.bss_descriptor
.beacon_period
;
588 * CFG802.11 operation handler to get station information.
590 * This function only works in connected mode, and dumps the
591 * requested station information, if available.
594 mwifiex_cfg80211_get_station(struct wiphy
*wiphy
, struct net_device
*dev
,
595 u8
*mac
, struct station_info
*sinfo
)
597 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(dev
);
599 if (!priv
->media_connected
)
601 if (memcmp(mac
, priv
->cfg_bssid
, ETH_ALEN
))
604 return mwifiex_dump_station_info(priv
, sinfo
);
608 * CFG802.11 operation handler to dump station information.
611 mwifiex_cfg80211_dump_station(struct wiphy
*wiphy
, struct net_device
*dev
,
612 int idx
, u8
*mac
, struct station_info
*sinfo
)
614 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(dev
);
616 if (!priv
->media_connected
|| idx
)
619 memcpy(mac
, priv
->cfg_bssid
, ETH_ALEN
);
621 return mwifiex_dump_station_info(priv
, sinfo
);
624 /* Supported rates to be advertised to the cfg80211 */
626 static struct ieee80211_rate mwifiex_rates
[] = {
627 {.bitrate
= 10, .hw_value
= 2, },
628 {.bitrate
= 20, .hw_value
= 4, },
629 {.bitrate
= 55, .hw_value
= 11, },
630 {.bitrate
= 110, .hw_value
= 22, },
631 {.bitrate
= 60, .hw_value
= 12, },
632 {.bitrate
= 90, .hw_value
= 18, },
633 {.bitrate
= 120, .hw_value
= 24, },
634 {.bitrate
= 180, .hw_value
= 36, },
635 {.bitrate
= 240, .hw_value
= 48, },
636 {.bitrate
= 360, .hw_value
= 72, },
637 {.bitrate
= 480, .hw_value
= 96, },
638 {.bitrate
= 540, .hw_value
= 108, },
641 /* Channel definitions to be advertised to cfg80211 */
643 static struct ieee80211_channel mwifiex_channels_2ghz
[] = {
644 {.center_freq
= 2412, .hw_value
= 1, },
645 {.center_freq
= 2417, .hw_value
= 2, },
646 {.center_freq
= 2422, .hw_value
= 3, },
647 {.center_freq
= 2427, .hw_value
= 4, },
648 {.center_freq
= 2432, .hw_value
= 5, },
649 {.center_freq
= 2437, .hw_value
= 6, },
650 {.center_freq
= 2442, .hw_value
= 7, },
651 {.center_freq
= 2447, .hw_value
= 8, },
652 {.center_freq
= 2452, .hw_value
= 9, },
653 {.center_freq
= 2457, .hw_value
= 10, },
654 {.center_freq
= 2462, .hw_value
= 11, },
655 {.center_freq
= 2467, .hw_value
= 12, },
656 {.center_freq
= 2472, .hw_value
= 13, },
657 {.center_freq
= 2484, .hw_value
= 14, },
660 static struct ieee80211_supported_band mwifiex_band_2ghz
= {
661 .channels
= mwifiex_channels_2ghz
,
662 .n_channels
= ARRAY_SIZE(mwifiex_channels_2ghz
),
663 .bitrates
= mwifiex_rates
,
664 .n_bitrates
= ARRAY_SIZE(mwifiex_rates
),
667 static struct ieee80211_channel mwifiex_channels_5ghz
[] = {
668 {.center_freq
= 5040, .hw_value
= 8, },
669 {.center_freq
= 5060, .hw_value
= 12, },
670 {.center_freq
= 5080, .hw_value
= 16, },
671 {.center_freq
= 5170, .hw_value
= 34, },
672 {.center_freq
= 5190, .hw_value
= 38, },
673 {.center_freq
= 5210, .hw_value
= 42, },
674 {.center_freq
= 5230, .hw_value
= 46, },
675 {.center_freq
= 5180, .hw_value
= 36, },
676 {.center_freq
= 5200, .hw_value
= 40, },
677 {.center_freq
= 5220, .hw_value
= 44, },
678 {.center_freq
= 5240, .hw_value
= 48, },
679 {.center_freq
= 5260, .hw_value
= 52, },
680 {.center_freq
= 5280, .hw_value
= 56, },
681 {.center_freq
= 5300, .hw_value
= 60, },
682 {.center_freq
= 5320, .hw_value
= 64, },
683 {.center_freq
= 5500, .hw_value
= 100, },
684 {.center_freq
= 5520, .hw_value
= 104, },
685 {.center_freq
= 5540, .hw_value
= 108, },
686 {.center_freq
= 5560, .hw_value
= 112, },
687 {.center_freq
= 5580, .hw_value
= 116, },
688 {.center_freq
= 5600, .hw_value
= 120, },
689 {.center_freq
= 5620, .hw_value
= 124, },
690 {.center_freq
= 5640, .hw_value
= 128, },
691 {.center_freq
= 5660, .hw_value
= 132, },
692 {.center_freq
= 5680, .hw_value
= 136, },
693 {.center_freq
= 5700, .hw_value
= 140, },
694 {.center_freq
= 5745, .hw_value
= 149, },
695 {.center_freq
= 5765, .hw_value
= 153, },
696 {.center_freq
= 5785, .hw_value
= 157, },
697 {.center_freq
= 5805, .hw_value
= 161, },
698 {.center_freq
= 5825, .hw_value
= 165, },
701 static struct ieee80211_supported_band mwifiex_band_5ghz
= {
702 .channels
= mwifiex_channels_5ghz
,
703 .n_channels
= ARRAY_SIZE(mwifiex_channels_5ghz
),
704 .bitrates
= mwifiex_rates
+ 4,
705 .n_bitrates
= ARRAY_SIZE(mwifiex_rates
) - 4,
709 /* Supported crypto cipher suits to be advertised to cfg80211 */
711 static const u32 mwifiex_cipher_suites
[] = {
712 WLAN_CIPHER_SUITE_WEP40
,
713 WLAN_CIPHER_SUITE_WEP104
,
714 WLAN_CIPHER_SUITE_TKIP
,
715 WLAN_CIPHER_SUITE_CCMP
,
719 * CFG802.11 operation handler for setting bit rates.
721 * Function selects legacy bang B/G/BG from corresponding bitrates selection.
722 * Currently only 2.4GHz band is supported.
724 static int mwifiex_cfg80211_set_bitrate_mask(struct wiphy
*wiphy
,
725 struct net_device
*dev
,
727 const struct cfg80211_bitrate_mask
*mask
)
729 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(dev
);
730 int index
= 0, mode
= 0, i
;
731 struct mwifiex_adapter
*adapter
= priv
->adapter
;
733 /* Currently only 2.4GHz is supported */
734 for (i
= 0; i
< mwifiex_band_2ghz
.n_bitrates
; i
++) {
736 * Rates below 6 Mbps in the table are CCK rates; 802.11b
737 * and from 6 they are OFDM; 802.11G
739 if (mwifiex_rates
[i
].bitrate
== 60) {
745 if (mask
->control
[IEEE80211_BAND_2GHZ
].legacy
< index
) {
749 if (mask
->control
[IEEE80211_BAND_2GHZ
].legacy
% index
)
753 if (!((mode
| adapter
->fw_bands
) & ~adapter
->fw_bands
)) {
754 adapter
->config_bands
= mode
;
755 if (priv
->bss_mode
== NL80211_IFTYPE_ADHOC
) {
756 adapter
->adhoc_start_band
= mode
;
757 adapter
->adhoc_11n_enabled
= false;
760 adapter
->sec_chan_offset
= IEEE80211_HT_PARAM_CHA_SEC_NONE
;
761 adapter
->channel_type
= NL80211_CHAN_NO_HT
;
763 wiphy_debug(wiphy
, "info: device configured in 802.11%s%s mode\n",
764 (mode
& BAND_B
) ? "b" : "", (mode
& BAND_G
) ? "g" : "");
770 * CFG802.11 operation handler for disconnection request.
772 * This function does not work when there is already a disconnection
773 * procedure going on.
776 mwifiex_cfg80211_disconnect(struct wiphy
*wiphy
, struct net_device
*dev
,
779 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(dev
);
781 if (mwifiex_deauthenticate(priv
, NULL
))
784 wiphy_dbg(wiphy
, "info: successfully disconnected from %pM:"
785 " reason code %d\n", priv
->cfg_bssid
, reason_code
);
787 memset(priv
->cfg_bssid
, 0, ETH_ALEN
);
793 * This function informs the CFG802.11 subsystem of a new IBSS.
795 * The following information are sent to the CFG802.11 subsystem
796 * to register the new IBSS. If we do not register the new IBSS,
797 * a kernel panic will result.
803 static int mwifiex_cfg80211_inform_ibss_bss(struct mwifiex_private
*priv
)
805 struct ieee80211_channel
*chan
;
806 struct mwifiex_bss_info bss_info
;
807 struct cfg80211_bss
*bss
;
809 u8 ie_buf
[IEEE80211_MAX_SSID_LEN
+ sizeof(struct ieee_types_header
)];
810 enum ieee80211_band band
;
812 if (mwifiex_get_bss_info(priv
, &bss_info
))
815 ie_buf
[0] = WLAN_EID_SSID
;
816 ie_buf
[1] = bss_info
.ssid
.ssid_len
;
818 memcpy(&ie_buf
[sizeof(struct ieee_types_header
)],
819 &bss_info
.ssid
.ssid
, bss_info
.ssid
.ssid_len
);
820 ie_len
= ie_buf
[1] + sizeof(struct ieee_types_header
);
822 band
= mwifiex_band_to_radio_type(priv
->curr_bss_params
.band
);
823 chan
= __ieee80211_get_channel(priv
->wdev
->wiphy
,
824 ieee80211_channel_to_frequency(bss_info
.bss_chan
,
827 bss
= cfg80211_inform_bss(priv
->wdev
->wiphy
, chan
,
828 bss_info
.bssid
, 0, WLAN_CAPABILITY_IBSS
,
829 0, ie_buf
, ie_len
, 0, GFP_KERNEL
);
830 cfg80211_put_bss(bss
);
831 memcpy(priv
->cfg_bssid
, bss_info
.bssid
, ETH_ALEN
);
837 * This function connects with a BSS.
839 * This function handles both Infra and Ad-Hoc modes. It also performs
840 * validity checking on the provided parameters, disconnects from the
841 * current BSS (if any), sets up the association/scan parameters,
842 * including security settings, and performs specific SSID scan before
845 * For Infra mode, the function returns failure if the specified SSID
846 * is not found in scan table. However, for Ad-Hoc mode, it can create
847 * the IBSS if it does not exist. On successful completion in either case,
848 * the function notifies the CFG802.11 subsystem of the new BSS connection.
851 mwifiex_cfg80211_assoc(struct mwifiex_private
*priv
, size_t ssid_len
, u8
*ssid
,
852 u8
*bssid
, int mode
, struct ieee80211_channel
*channel
,
853 struct cfg80211_connect_params
*sme
, bool privacy
)
855 struct cfg80211_ssid req_ssid
;
856 int ret
, auth_type
= 0;
857 struct cfg80211_bss
*bss
= NULL
;
858 u8 is_scanning_required
= 0;
860 memset(&req_ssid
, 0, sizeof(struct cfg80211_ssid
));
862 req_ssid
.ssid_len
= ssid_len
;
863 if (ssid_len
> IEEE80211_MAX_SSID_LEN
) {
864 dev_err(priv
->adapter
->dev
, "invalid SSID - aborting\n");
868 memcpy(req_ssid
.ssid
, ssid
, ssid_len
);
869 if (!req_ssid
.ssid_len
|| req_ssid
.ssid
[0] < 0x20) {
870 dev_err(priv
->adapter
->dev
, "invalid SSID - aborting\n");
874 /* disconnect before try to associate */
875 mwifiex_deauthenticate(priv
, NULL
);
878 ret
= mwifiex_set_rf_channel(priv
, channel
,
879 priv
->adapter
->channel_type
);
881 /* As this is new association, clear locally stored
882 * keys and security related flags */
883 priv
->sec_info
.wpa_enabled
= false;
884 priv
->sec_info
.wpa2_enabled
= false;
885 priv
->wep_key_curr_index
= 0;
886 priv
->sec_info
.encryption_mode
= 0;
887 priv
->sec_info
.is_authtype_auto
= 0;
888 ret
= mwifiex_set_encode(priv
, NULL
, 0, 0, 1);
890 if (mode
== NL80211_IFTYPE_ADHOC
) {
891 /* "privacy" is set only for ad-hoc mode */
894 * Keep WLAN_CIPHER_SUITE_WEP104 for now so that
895 * the firmware can find a matching network from the
896 * scan. The cfg80211 does not give us the encryption
897 * mode at this stage so just setting it to WEP here.
899 priv
->sec_info
.encryption_mode
=
900 WLAN_CIPHER_SUITE_WEP104
;
901 priv
->sec_info
.authentication_mode
=
902 NL80211_AUTHTYPE_OPEN_SYSTEM
;
908 /* Now handle infra mode. "sme" is valid for infra mode only */
909 if (sme
->auth_type
== NL80211_AUTHTYPE_AUTOMATIC
) {
910 auth_type
= NL80211_AUTHTYPE_OPEN_SYSTEM
;
911 priv
->sec_info
.is_authtype_auto
= 1;
913 auth_type
= sme
->auth_type
;
916 if (sme
->crypto
.n_ciphers_pairwise
) {
917 priv
->sec_info
.encryption_mode
=
918 sme
->crypto
.ciphers_pairwise
[0];
919 priv
->sec_info
.authentication_mode
= auth_type
;
922 if (sme
->crypto
.cipher_group
) {
923 priv
->sec_info
.encryption_mode
= sme
->crypto
.cipher_group
;
924 priv
->sec_info
.authentication_mode
= auth_type
;
927 ret
= mwifiex_set_gen_ie(priv
, sme
->ie
, sme
->ie_len
);
930 if (mwifiex_is_alg_wep(priv
->sec_info
.encryption_mode
)) {
931 dev_dbg(priv
->adapter
->dev
,
932 "info: setting wep encryption"
933 " with key len %d\n", sme
->key_len
);
934 priv
->wep_key_curr_index
= sme
->key_idx
;
935 ret
= mwifiex_set_encode(priv
, sme
->key
, sme
->key_len
,
941 * Scan entries are valid for some time (15 sec). So we can save one
942 * active scan time if we just try cfg80211_get_bss first. If it fails
943 * then request scan and cfg80211_get_bss() again for final output.
946 if (is_scanning_required
) {
947 /* Do specific SSID scanning */
948 if (mwifiex_request_scan(priv
, &req_ssid
)) {
949 dev_err(priv
->adapter
->dev
, "scan error\n");
954 /* Find the BSS we want using available scan results */
955 if (mode
== NL80211_IFTYPE_ADHOC
)
956 bss
= cfg80211_get_bss(priv
->wdev
->wiphy
, channel
,
957 bssid
, ssid
, ssid_len
,
958 WLAN_CAPABILITY_IBSS
,
959 WLAN_CAPABILITY_IBSS
);
961 bss
= cfg80211_get_bss(priv
->wdev
->wiphy
, channel
,
962 bssid
, ssid
, ssid_len
,
964 WLAN_CAPABILITY_ESS
);
967 if (is_scanning_required
) {
968 dev_warn(priv
->adapter
->dev
,
969 "assoc: requested bss not found in scan results\n");
972 is_scanning_required
= 1;
974 dev_dbg(priv
->adapter
->dev
,
975 "info: trying to associate to '%s' bssid %pM\n",
976 (char *) req_ssid
.ssid
, bss
->bssid
);
977 memcpy(&priv
->cfg_bssid
, bss
->bssid
, ETH_ALEN
);
982 if (mwifiex_bss_start(priv
, bss
, &req_ssid
))
985 if (mode
== NL80211_IFTYPE_ADHOC
) {
986 /* Inform the BSS information to kernel, otherwise
987 * kernel will give a panic after successful assoc */
988 if (mwifiex_cfg80211_inform_ibss_bss(priv
))
996 * CFG802.11 operation handler for association request.
998 * This function does not work when the current mode is set to Ad-Hoc, or
999 * when there is already an association procedure going on. The given BSS
1000 * information is used to associate.
1003 mwifiex_cfg80211_connect(struct wiphy
*wiphy
, struct net_device
*dev
,
1004 struct cfg80211_connect_params
*sme
)
1006 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(dev
);
1009 if (priv
->bss_mode
== NL80211_IFTYPE_ADHOC
) {
1010 wiphy_err(wiphy
, "received infra assoc request "
1011 "when station is in ibss mode\n");
1015 wiphy_dbg(wiphy
, "info: Trying to associate to %s and bssid %pM\n",
1016 (char *) sme
->ssid
, sme
->bssid
);
1018 ret
= mwifiex_cfg80211_assoc(priv
, sme
->ssid_len
, sme
->ssid
, sme
->bssid
,
1019 priv
->bss_mode
, sme
->channel
, sme
, 0);
1022 cfg80211_connect_result(priv
->netdev
, priv
->cfg_bssid
, NULL
, 0,
1023 NULL
, 0, WLAN_STATUS_SUCCESS
,
1025 dev_dbg(priv
->adapter
->dev
,
1026 "info: associated to bssid %pM successfully\n",
1029 dev_dbg(priv
->adapter
->dev
,
1030 "info: association to bssid %pM failed\n",
1032 memset(priv
->cfg_bssid
, 0, ETH_ALEN
);
1039 * CFG802.11 operation handler to join an IBSS.
1041 * This function does not work in any mode other than Ad-Hoc, or if
1042 * a join operation is already in progress.
1045 mwifiex_cfg80211_join_ibss(struct wiphy
*wiphy
, struct net_device
*dev
,
1046 struct cfg80211_ibss_params
*params
)
1048 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(dev
);
1051 if (priv
->bss_mode
!= NL80211_IFTYPE_ADHOC
) {
1052 wiphy_err(wiphy
, "request to join ibss received "
1053 "when station is not in ibss mode\n");
1057 wiphy_dbg(wiphy
, "info: trying to join to %s and bssid %pM\n",
1058 (char *) params
->ssid
, params
->bssid
);
1060 ret
= mwifiex_cfg80211_assoc(priv
, params
->ssid_len
, params
->ssid
,
1061 params
->bssid
, priv
->bss_mode
,
1062 params
->channel
, NULL
, params
->privacy
);
1065 cfg80211_ibss_joined(priv
->netdev
, priv
->cfg_bssid
, GFP_KERNEL
);
1066 dev_dbg(priv
->adapter
->dev
,
1067 "info: joined/created adhoc network with bssid"
1068 " %pM successfully\n", priv
->cfg_bssid
);
1070 dev_dbg(priv
->adapter
->dev
,
1071 "info: failed creating/joining adhoc network\n");
1078 * CFG802.11 operation handler to leave an IBSS.
1080 * This function does not work if a leave operation is
1081 * already in progress.
1084 mwifiex_cfg80211_leave_ibss(struct wiphy
*wiphy
, struct net_device
*dev
)
1086 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(dev
);
1088 wiphy_dbg(wiphy
, "info: disconnecting from essid %pM\n",
1090 if (mwifiex_deauthenticate(priv
, NULL
))
1093 memset(priv
->cfg_bssid
, 0, ETH_ALEN
);
1099 * CFG802.11 operation handler for scan request.
1101 * This function issues a scan request to the firmware based upon
1102 * the user specified scan configuration. On successfull completion,
1103 * it also informs the results.
1106 mwifiex_cfg80211_scan(struct wiphy
*wiphy
, struct net_device
*dev
,
1107 struct cfg80211_scan_request
*request
)
1109 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(dev
);
1111 struct ieee80211_channel
*chan
;
1113 wiphy_dbg(wiphy
, "info: received scan request on %s\n", dev
->name
);
1115 priv
->scan_request
= request
;
1117 priv
->user_scan_cfg
= kzalloc(sizeof(struct mwifiex_user_scan_cfg
),
1119 if (!priv
->user_scan_cfg
) {
1120 dev_err(priv
->adapter
->dev
, "failed to alloc scan_req\n");
1124 priv
->user_scan_cfg
->num_ssids
= request
->n_ssids
;
1125 priv
->user_scan_cfg
->ssid_list
= request
->ssids
;
1127 for (i
= 0; i
< request
->n_channels
; i
++) {
1128 chan
= request
->channels
[i
];
1129 priv
->user_scan_cfg
->chan_list
[i
].chan_number
= chan
->hw_value
;
1130 priv
->user_scan_cfg
->chan_list
[i
].radio_type
= chan
->band
;
1132 if (chan
->flags
& IEEE80211_CHAN_PASSIVE_SCAN
)
1133 priv
->user_scan_cfg
->chan_list
[i
].scan_type
=
1134 MWIFIEX_SCAN_TYPE_PASSIVE
;
1136 priv
->user_scan_cfg
->chan_list
[i
].scan_type
=
1137 MWIFIEX_SCAN_TYPE_ACTIVE
;
1139 priv
->user_scan_cfg
->chan_list
[i
].scan_time
= 0;
1141 if (mwifiex_set_user_scan_ioctl(priv
, priv
->user_scan_cfg
))
1148 * This function sets up the CFG802.11 specific HT capability fields
1149 * with default values.
1151 * The following default values are set -
1152 * - HT Supported = True
1153 * - Maximum AMPDU length factor = IEEE80211_HT_MAX_AMPDU_64K
1154 * - Minimum AMPDU spacing = IEEE80211_HT_MPDU_DENSITY_NONE
1155 * - HT Capabilities supported by firmware
1156 * - MCS information, Rx mask = 0xff
1157 * - MCD information, Tx parameters = IEEE80211_HT_MCS_TX_DEFINED (0x01)
1160 mwifiex_setup_ht_caps(struct ieee80211_sta_ht_cap
*ht_info
,
1161 struct mwifiex_private
*priv
)
1164 struct ieee80211_mcs_info mcs_set
;
1165 u8
*mcs
= (u8
*)&mcs_set
;
1166 struct mwifiex_adapter
*adapter
= priv
->adapter
;
1168 ht_info
->ht_supported
= true;
1169 ht_info
->ampdu_factor
= IEEE80211_HT_MAX_AMPDU_64K
;
1170 ht_info
->ampdu_density
= IEEE80211_HT_MPDU_DENSITY_NONE
;
1172 memset(&ht_info
->mcs
, 0, sizeof(ht_info
->mcs
));
1174 /* Fill HT capability information */
1175 if (ISSUPP_CHANWIDTH40(adapter
->hw_dot_11n_dev_cap
))
1176 ht_info
->cap
|= IEEE80211_HT_CAP_SUP_WIDTH_20_40
;
1178 ht_info
->cap
&= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40
;
1180 if (ISSUPP_SHORTGI20(adapter
->hw_dot_11n_dev_cap
))
1181 ht_info
->cap
|= IEEE80211_HT_CAP_SGI_20
;
1183 ht_info
->cap
&= ~IEEE80211_HT_CAP_SGI_20
;
1185 if (ISSUPP_SHORTGI40(adapter
->hw_dot_11n_dev_cap
))
1186 ht_info
->cap
|= IEEE80211_HT_CAP_SGI_40
;
1188 ht_info
->cap
&= ~IEEE80211_HT_CAP_SGI_40
;
1190 if (ISSUPP_RXSTBC(adapter
->hw_dot_11n_dev_cap
))
1191 ht_info
->cap
|= 1 << IEEE80211_HT_CAP_RX_STBC_SHIFT
;
1193 ht_info
->cap
&= ~(3 << IEEE80211_HT_CAP_RX_STBC_SHIFT
);
1195 if (ISSUPP_TXSTBC(adapter
->hw_dot_11n_dev_cap
))
1196 ht_info
->cap
|= IEEE80211_HT_CAP_TX_STBC
;
1198 ht_info
->cap
&= ~IEEE80211_HT_CAP_TX_STBC
;
1200 ht_info
->cap
&= ~IEEE80211_HT_CAP_MAX_AMSDU
;
1201 ht_info
->cap
|= IEEE80211_HT_CAP_SM_PS
;
1203 rx_mcs_supp
= GET_RXMCSSUPP(adapter
->hw_dev_mcs_support
);
1204 /* Set MCS for 1x1 */
1205 memset(mcs
, 0xff, rx_mcs_supp
);
1206 /* Clear all the other values */
1207 memset(&mcs
[rx_mcs_supp
], 0,
1208 sizeof(struct ieee80211_mcs_info
) - rx_mcs_supp
);
1209 if (priv
->bss_mode
== NL80211_IFTYPE_STATION
||
1210 ISSUPP_CHANWIDTH40(adapter
->hw_dot_11n_dev_cap
))
1211 /* Set MCS32 for infra mode or ad-hoc mode with 40MHz support */
1212 SETHT_MCS32(mcs_set
.rx_mask
);
1214 memcpy((u8
*) &ht_info
->mcs
, mcs
, sizeof(struct ieee80211_mcs_info
));
1216 ht_info
->mcs
.tx_params
= IEEE80211_HT_MCS_TX_DEFINED
;
1220 * create a new virtual interface with the given name
1222 struct net_device
*mwifiex_add_virtual_intf(struct wiphy
*wiphy
,
1224 enum nl80211_iftype type
,
1226 struct vif_params
*params
)
1228 struct mwifiex_private
*priv
= mwifiex_cfg80211_get_priv(wiphy
);
1229 struct mwifiex_adapter
*adapter
;
1230 struct net_device
*dev
;
1236 adapter
= priv
->adapter
;
1241 case NL80211_IFTYPE_UNSPECIFIED
:
1242 case NL80211_IFTYPE_STATION
:
1243 case NL80211_IFTYPE_ADHOC
:
1244 if (priv
->bss_mode
) {
1245 wiphy_err(wiphy
, "cannot create multiple"
1246 " station/adhoc interfaces\n");
1250 if (type
== NL80211_IFTYPE_UNSPECIFIED
)
1251 priv
->bss_mode
= NL80211_IFTYPE_STATION
;
1253 priv
->bss_mode
= type
;
1255 priv
->bss_type
= MWIFIEX_BSS_TYPE_STA
;
1256 priv
->frame_type
= MWIFIEX_DATA_FRAME_TYPE_ETH_II
;
1257 priv
->bss_priority
= 0;
1258 priv
->bss_role
= MWIFIEX_BSS_ROLE_STA
;
1263 wiphy_err(wiphy
, "type not supported\n");
1267 dev
= alloc_netdev_mq(sizeof(struct mwifiex_private
*), name
,
1270 wiphy_err(wiphy
, "no memory available for netdevice\n");
1274 dev_net_set(dev
, wiphy_net(wiphy
));
1275 dev
->ieee80211_ptr
= priv
->wdev
;
1276 dev
->ieee80211_ptr
->iftype
= priv
->bss_mode
;
1277 memcpy(dev
->dev_addr
, wiphy
->perm_addr
, ETH_ALEN
);
1278 memcpy(dev
->perm_addr
, wiphy
->perm_addr
, ETH_ALEN
);
1279 SET_NETDEV_DEV(dev
, wiphy_dev(wiphy
));
1281 dev
->flags
|= IFF_BROADCAST
| IFF_MULTICAST
;
1282 dev
->watchdog_timeo
= MWIFIEX_DEFAULT_WATCHDOG_TIMEOUT
;
1283 dev
->hard_header_len
+= MWIFIEX_MIN_DATA_HEADER_LEN
;
1285 mdev_priv
= netdev_priv(dev
);
1286 *((unsigned long *) mdev_priv
) = (unsigned long) priv
;
1289 mwifiex_init_priv_params(priv
, dev
);
1291 SET_NETDEV_DEV(dev
, adapter
->dev
);
1293 /* Register network device */
1294 if (register_netdevice(dev
)) {
1295 wiphy_err(wiphy
, "cannot register virtual network device\n");
1299 sema_init(&priv
->async_sem
, 1);
1300 priv
->scan_pending_on_block
= false;
1302 dev_dbg(adapter
->dev
, "info: %s: Marvell 802.11 Adapter\n", dev
->name
);
1304 #ifdef CONFIG_DEBUG_FS
1305 mwifiex_dev_debugfs_init(priv
);
1309 if (dev
&& (dev
->reg_state
== NETREG_UNREGISTERED
))
1311 priv
->bss_mode
= NL80211_IFTYPE_UNSPECIFIED
;
1315 EXPORT_SYMBOL_GPL(mwifiex_add_virtual_intf
);
1318 * del_virtual_intf: remove the virtual interface determined by dev
1320 int mwifiex_del_virtual_intf(struct wiphy
*wiphy
, struct net_device
*dev
)
1322 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(dev
);
1324 #ifdef CONFIG_DEBUG_FS
1325 mwifiex_dev_debugfs_remove(priv
);
1328 if (!netif_queue_stopped(priv
->netdev
))
1329 netif_stop_queue(priv
->netdev
);
1331 if (netif_carrier_ok(priv
->netdev
))
1332 netif_carrier_off(priv
->netdev
);
1334 if (dev
->reg_state
== NETREG_REGISTERED
)
1335 unregister_netdevice(dev
);
1337 if (dev
->reg_state
== NETREG_UNREGISTERED
)
1340 /* Clear the priv in adapter */
1341 priv
->netdev
= NULL
;
1343 priv
->media_connected
= false;
1345 priv
->bss_mode
= NL80211_IFTYPE_UNSPECIFIED
;
1349 EXPORT_SYMBOL_GPL(mwifiex_del_virtual_intf
);
1351 /* station cfg80211 operations */
1352 static struct cfg80211_ops mwifiex_cfg80211_ops
= {
1353 .add_virtual_intf
= mwifiex_add_virtual_intf
,
1354 .del_virtual_intf
= mwifiex_del_virtual_intf
,
1355 .change_virtual_intf
= mwifiex_cfg80211_change_virtual_intf
,
1356 .scan
= mwifiex_cfg80211_scan
,
1357 .connect
= mwifiex_cfg80211_connect
,
1358 .disconnect
= mwifiex_cfg80211_disconnect
,
1359 .get_station
= mwifiex_cfg80211_get_station
,
1360 .dump_station
= mwifiex_cfg80211_dump_station
,
1361 .set_wiphy_params
= mwifiex_cfg80211_set_wiphy_params
,
1362 .set_channel
= mwifiex_cfg80211_set_channel
,
1363 .join_ibss
= mwifiex_cfg80211_join_ibss
,
1364 .leave_ibss
= mwifiex_cfg80211_leave_ibss
,
1365 .add_key
= mwifiex_cfg80211_add_key
,
1366 .del_key
= mwifiex_cfg80211_del_key
,
1367 .set_default_key
= mwifiex_cfg80211_set_default_key
,
1368 .set_power_mgmt
= mwifiex_cfg80211_set_power_mgmt
,
1369 .set_tx_power
= mwifiex_cfg80211_set_tx_power
,
1370 .set_bitrate_mask
= mwifiex_cfg80211_set_bitrate_mask
,
1374 * This function registers the device with CFG802.11 subsystem.
1376 * The function creates the wireless device/wiphy, populates it with
1377 * default parameters and handler function pointers, and finally
1378 * registers the device.
1380 int mwifiex_register_cfg80211(struct mwifiex_private
*priv
)
1384 struct wireless_dev
*wdev
;
1385 struct ieee80211_sta_ht_cap
*ht_info
;
1387 wdev
= kzalloc(sizeof(struct wireless_dev
), GFP_KERNEL
);
1389 dev_err(priv
->adapter
->dev
, "%s: allocating wireless device\n",
1394 wiphy_new(&mwifiex_cfg80211_ops
,
1395 sizeof(struct mwifiex_private
*));
1400 wdev
->iftype
= NL80211_IFTYPE_STATION
;
1401 wdev
->wiphy
->max_scan_ssids
= 10;
1402 wdev
->wiphy
->interface_modes
= BIT(NL80211_IFTYPE_STATION
) |
1403 BIT(NL80211_IFTYPE_ADHOC
);
1405 wdev
->wiphy
->bands
[IEEE80211_BAND_2GHZ
] = &mwifiex_band_2ghz
;
1406 ht_info
= &wdev
->wiphy
->bands
[IEEE80211_BAND_2GHZ
]->ht_cap
;
1407 mwifiex_setup_ht_caps(ht_info
, priv
);
1409 if (priv
->adapter
->config_bands
& BAND_A
) {
1410 wdev
->wiphy
->bands
[IEEE80211_BAND_5GHZ
] = &mwifiex_band_5ghz
;
1411 ht_info
= &wdev
->wiphy
->bands
[IEEE80211_BAND_5GHZ
]->ht_cap
;
1412 mwifiex_setup_ht_caps(ht_info
, priv
);
1414 wdev
->wiphy
->bands
[IEEE80211_BAND_5GHZ
] = NULL
;
1417 /* Initialize cipher suits */
1418 wdev
->wiphy
->cipher_suites
= mwifiex_cipher_suites
;
1419 wdev
->wiphy
->n_cipher_suites
= ARRAY_SIZE(mwifiex_cipher_suites
);
1421 memcpy(wdev
->wiphy
->perm_addr
, priv
->curr_addr
, ETH_ALEN
);
1422 wdev
->wiphy
->signal_type
= CFG80211_SIGNAL_TYPE_MBM
;
1424 /* Reserve space for bss band information */
1425 wdev
->wiphy
->bss_priv_size
= sizeof(u8
);
1427 wdev
->wiphy
->reg_notifier
= mwifiex_reg_notifier
;
1429 /* Set struct mwifiex_private pointer in wiphy_priv */
1430 wdev_priv
= wiphy_priv(wdev
->wiphy
);
1432 *(unsigned long *) wdev_priv
= (unsigned long) priv
;
1434 set_wiphy_dev(wdev
->wiphy
, (struct device
*) priv
->adapter
->dev
);
1436 ret
= wiphy_register(wdev
->wiphy
);
1438 dev_err(priv
->adapter
->dev
, "%s: registering cfg80211 device\n",
1440 wiphy_free(wdev
->wiphy
);
1444 dev_dbg(priv
->adapter
->dev
,
1445 "info: successfully registered wiphy device\n");