projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
rt2x00: rt2800lib: add BBP post initialization for RT3593
[deliverable/linux.git] / drivers / net / wireless / rt2x00 / rt2800lib.c
1 /*
2 Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
3 Copyright (C) 2010 Ivo van Doorn <IvDoorn@gmail.com>
4 Copyright (C) 2009 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
5 Copyright (C) 2009 Gertjan van Wingerde <gwingerde@gmail.com>
6
7 Based on the original rt2800pci.c and rt2800usb.c.
8 Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com>
9 Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
10 Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com>
11 Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de>
12 Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com>
13 Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
14 <http://rt2x00.serialmonkey.com>
15
16 This program is free software; you can redistribute it and/or modify
17 it under the terms of the GNU General Public License as published by
18 the Free Software Foundation; either version 2 of the License, or
19 (at your option) any later version.
20
21 This program is distributed in the hope that it will be useful,
22 but WITHOUT ANY WARRANTY; without even the implied warranty of
23 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
24 GNU General Public License for more details.
25
26 You should have received a copy of the GNU General Public License
27 along with this program; if not, write to the
28 Free Software Foundation, Inc.,
29 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
30 */
31
32 /*
33 Module: rt2800lib
34 Abstract: rt2800 generic device routines.
35 */
36
37 #include <linux/crc-ccitt.h>
38 #include <linux/kernel.h>
39 #include <linux/module.h>
40 #include <linux/slab.h>
41
42 #include "rt2x00.h"
43 #include "rt2800lib.h"
44 #include "rt2800.h"
45
46 /*
47 * Register access.
48 * All access to the CSR registers will go through the methods
49 * rt2800_register_read and rt2800_register_write.
50 * BBP and RF register require indirect register access,
51 * and use the CSR registers BBPCSR and RFCSR to achieve this.
52 * These indirect registers work with busy bits,
53 * and we will try maximal REGISTER_BUSY_COUNT times to access
54 * the register while taking a REGISTER_BUSY_DELAY us delay
55 * between each attampt. When the busy bit is still set at that time,
56 * the access attempt is considered to have failed,
57 * and we will print an error.
58 * The _lock versions must be used if you already hold the csr_mutex
59 */
60 #define WAIT_FOR_BBP(__dev, __reg) \
61 rt2800_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
62 #define WAIT_FOR_RFCSR(__dev, __reg) \
63 rt2800_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
64 #define WAIT_FOR_RF(__dev, __reg) \
65 rt2800_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
66 #define WAIT_FOR_MCU(__dev, __reg) \
67 rt2800_regbusy_read((__dev), H2M_MAILBOX_CSR, \
68 H2M_MAILBOX_CSR_OWNER, (__reg))
69
70 static inline bool rt2800_is_305x_soc(struct rt2x00_dev *rt2x00dev)
71 {
72 /* check for rt2872 on SoC */
73 if (!rt2x00_is_soc(rt2x00dev) ||
74 !rt2x00_rt(rt2x00dev, RT2872))
75 return false;
76
77 /* we know for sure that these rf chipsets are used on rt305x boards */
78 if (rt2x00_rf(rt2x00dev, RF3020) ||
79 rt2x00_rf(rt2x00dev, RF3021) ||
80 rt2x00_rf(rt2x00dev, RF3022))
81 return true;
82
83 rt2x00_warn(rt2x00dev, "Unknown RF chipset on rt305x\n");
84 return false;
85 }
86
87 static void rt2800_bbp_write(struct rt2x00_dev *rt2x00dev,
88 const unsigned int word, const u8 value)
89 {
90 u32 reg;
91
92 mutex_lock(&rt2x00dev->csr_mutex);
93
94 /*
95 * Wait until the BBP becomes available, afterwards we
96 * can safely write the new data into the register.
97 */
98 if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
99 reg = 0;
100 rt2x00_set_field32(&reg, BBP_CSR_CFG_VALUE, value);
101 rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
102 rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
103 rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 0);
104 rt2x00_set_field32(&reg, BBP_CSR_CFG_BBP_RW_MODE, 1);
105
106 rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
107 }
108
109 mutex_unlock(&rt2x00dev->csr_mutex);
110 }
111
112 static void rt2800_bbp_read(struct rt2x00_dev *rt2x00dev,
113 const unsigned int word, u8 *value)
114 {
115 u32 reg;
116
117 mutex_lock(&rt2x00dev->csr_mutex);
118
119 /*
120 * Wait until the BBP becomes available, afterwards we
121 * can safely write the read request into the register.
122 * After the data has been written, we wait until hardware
123 * returns the correct value, if at any time the register
124 * doesn't become available in time, reg will be 0xffffffff
125 * which means we return 0xff to the caller.
126 */
127 if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
128 reg = 0;
129 rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
130 rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
131 rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 1);
132 rt2x00_set_field32(&reg, BBP_CSR_CFG_BBP_RW_MODE, 1);
133
134 rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
135
136 WAIT_FOR_BBP(rt2x00dev, &reg);
137 }
138
139 *value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE);
140
141 mutex_unlock(&rt2x00dev->csr_mutex);
142 }
143
144 static void rt2800_rfcsr_write(struct rt2x00_dev *rt2x00dev,
145 const unsigned int word, const u8 value)
146 {
147 u32 reg;
148
149 mutex_lock(&rt2x00dev->csr_mutex);
150
151 /*
152 * Wait until the RFCSR becomes available, afterwards we
153 * can safely write the new data into the register.
154 */
155 if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
156 reg = 0;
157 rt2x00_set_field32(&reg, RF_CSR_CFG_DATA, value);
158 rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
159 rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 1);
160 rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
161
162 rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
163 }
164
165 mutex_unlock(&rt2x00dev->csr_mutex);
166 }
167
168 static void rt2800_rfcsr_read(struct rt2x00_dev *rt2x00dev,
169 const unsigned int word, u8 *value)
170 {
171 u32 reg;
172
173 mutex_lock(&rt2x00dev->csr_mutex);
174
175 /*
176 * Wait until the RFCSR becomes available, afterwards we
177 * can safely write the read request into the register.
178 * After the data has been written, we wait until hardware
179 * returns the correct value, if at any time the register
180 * doesn't become available in time, reg will be 0xffffffff
181 * which means we return 0xff to the caller.
182 */
183 if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
184 reg = 0;
185 rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
186 rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 0);
187 rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
188
189 rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
190
191 WAIT_FOR_RFCSR(rt2x00dev, &reg);
192 }
193
194 *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
195
196 mutex_unlock(&rt2x00dev->csr_mutex);
197 }
198
199 static void rt2800_rf_write(struct rt2x00_dev *rt2x00dev,
200 const unsigned int word, const u32 value)
201 {
202 u32 reg;
203
204 mutex_lock(&rt2x00dev->csr_mutex);
205
206 /*
207 * Wait until the RF becomes available, afterwards we
208 * can safely write the new data into the register.
209 */
210 if (WAIT_FOR_RF(rt2x00dev, &reg)) {
211 reg = 0;
212 rt2x00_set_field32(&reg, RF_CSR_CFG0_REG_VALUE_BW, value);
213 rt2x00_set_field32(&reg, RF_CSR_CFG0_STANDBYMODE, 0);
214 rt2x00_set_field32(&reg, RF_CSR_CFG0_SEL, 0);
215 rt2x00_set_field32(&reg, RF_CSR_CFG0_BUSY, 1);
216
217 rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG0, reg);
218 rt2x00_rf_write(rt2x00dev, word, value);
219 }
220
221 mutex_unlock(&rt2x00dev->csr_mutex);
222 }
223
224 static const unsigned int rt2800_eeprom_map[EEPROM_WORD_COUNT] = {
225 [EEPROM_CHIP_ID] = 0x0000,
226 [EEPROM_VERSION] = 0x0001,
227 [EEPROM_MAC_ADDR_0] = 0x0002,
228 [EEPROM_MAC_ADDR_1] = 0x0003,
229 [EEPROM_MAC_ADDR_2] = 0x0004,
230 [EEPROM_NIC_CONF0] = 0x001a,
231 [EEPROM_NIC_CONF1] = 0x001b,
232 [EEPROM_FREQ] = 0x001d,
233 [EEPROM_LED_AG_CONF] = 0x001e,
234 [EEPROM_LED_ACT_CONF] = 0x001f,
235 [EEPROM_LED_POLARITY] = 0x0020,
236 [EEPROM_NIC_CONF2] = 0x0021,
237 [EEPROM_LNA] = 0x0022,
238 [EEPROM_RSSI_BG] = 0x0023,
239 [EEPROM_RSSI_BG2] = 0x0024,
240 [EEPROM_TXMIXER_GAIN_BG] = 0x0024, /* overlaps with RSSI_BG2 */
241 [EEPROM_RSSI_A] = 0x0025,
242 [EEPROM_RSSI_A2] = 0x0026,
243 [EEPROM_TXMIXER_GAIN_A] = 0x0026, /* overlaps with RSSI_A2 */
244 [EEPROM_EIRP_MAX_TX_POWER] = 0x0027,
245 [EEPROM_TXPOWER_DELTA] = 0x0028,
246 [EEPROM_TXPOWER_BG1] = 0x0029,
247 [EEPROM_TXPOWER_BG2] = 0x0030,
248 [EEPROM_TSSI_BOUND_BG1] = 0x0037,
249 [EEPROM_TSSI_BOUND_BG2] = 0x0038,
250 [EEPROM_TSSI_BOUND_BG3] = 0x0039,
251 [EEPROM_TSSI_BOUND_BG4] = 0x003a,
252 [EEPROM_TSSI_BOUND_BG5] = 0x003b,
253 [EEPROM_TXPOWER_A1] = 0x003c,
254 [EEPROM_TXPOWER_A2] = 0x0053,
255 [EEPROM_TSSI_BOUND_A1] = 0x006a,
256 [EEPROM_TSSI_BOUND_A2] = 0x006b,
257 [EEPROM_TSSI_BOUND_A3] = 0x006c,
258 [EEPROM_TSSI_BOUND_A4] = 0x006d,
259 [EEPROM_TSSI_BOUND_A5] = 0x006e,
260 [EEPROM_TXPOWER_BYRATE] = 0x006f,
261 [EEPROM_BBP_START] = 0x0078,
262 };
263
264 static const unsigned int rt2800_eeprom_map_ext[EEPROM_WORD_COUNT] = {
265 [EEPROM_CHIP_ID] = 0x0000,
266 [EEPROM_VERSION] = 0x0001,
267 [EEPROM_MAC_ADDR_0] = 0x0002,
268 [EEPROM_MAC_ADDR_1] = 0x0003,
269 [EEPROM_MAC_ADDR_2] = 0x0004,
270 [EEPROM_NIC_CONF0] = 0x001a,
271 [EEPROM_NIC_CONF1] = 0x001b,
272 [EEPROM_NIC_CONF2] = 0x001c,
273 [EEPROM_EIRP_MAX_TX_POWER] = 0x0020,
274 [EEPROM_FREQ] = 0x0022,
275 [EEPROM_LED_AG_CONF] = 0x0023,
276 [EEPROM_LED_ACT_CONF] = 0x0024,
277 [EEPROM_LED_POLARITY] = 0x0025,
278 [EEPROM_LNA] = 0x0026,
279 [EEPROM_EXT_LNA2] = 0x0027,
280 [EEPROM_RSSI_BG] = 0x0028,
281 [EEPROM_TXPOWER_DELTA] = 0x0028, /* Overlaps with RSSI_BG */
282 [EEPROM_RSSI_BG2] = 0x0029,
283 [EEPROM_TXMIXER_GAIN_BG] = 0x0029, /* Overlaps with RSSI_BG2 */
284 [EEPROM_RSSI_A] = 0x002a,
285 [EEPROM_RSSI_A2] = 0x002b,
286 [EEPROM_TXMIXER_GAIN_A] = 0x002b, /* Overlaps with RSSI_A2 */
287 [EEPROM_TXPOWER_BG1] = 0x0030,
288 [EEPROM_TXPOWER_BG2] = 0x0037,
289 [EEPROM_EXT_TXPOWER_BG3] = 0x003e,
290 [EEPROM_TSSI_BOUND_BG1] = 0x0045,
291 [EEPROM_TSSI_BOUND_BG2] = 0x0046,
292 [EEPROM_TSSI_BOUND_BG3] = 0x0047,
293 [EEPROM_TSSI_BOUND_BG4] = 0x0048,
294 [EEPROM_TSSI_BOUND_BG5] = 0x0049,
295 [EEPROM_TXPOWER_A1] = 0x004b,
296 [EEPROM_TXPOWER_A2] = 0x0065,
297 [EEPROM_EXT_TXPOWER_A3] = 0x007f,
298 [EEPROM_TSSI_BOUND_A1] = 0x009a,
299 [EEPROM_TSSI_BOUND_A2] = 0x009b,
300 [EEPROM_TSSI_BOUND_A3] = 0x009c,
301 [EEPROM_TSSI_BOUND_A4] = 0x009d,
302 [EEPROM_TSSI_BOUND_A5] = 0x009e,
303 [EEPROM_TXPOWER_BYRATE] = 0x00a0,
304 };
305
306 static unsigned int rt2800_eeprom_word_index(struct rt2x00_dev *rt2x00dev,
307 const enum rt2800_eeprom_word word)
308 {
309 const unsigned int *map;
310 unsigned int index;
311
312 if (WARN_ONCE(word >= EEPROM_WORD_COUNT,
313 "%s: invalid EEPROM word %d\n",
314 wiphy_name(rt2x00dev->hw->wiphy), word))
315 return 0;
316
317 if (rt2x00_rt(rt2x00dev, RT3593))
318 map = rt2800_eeprom_map_ext;
319 else
320 map = rt2800_eeprom_map;
321
322 index = map[word];
323
324 /* Index 0 is valid only for EEPROM_CHIP_ID.
325 * Otherwise it means that the offset of the
326 * given word is not initialized in the map,
327 * or that the field is not usable on the
328 * actual chipset.
329 */
330 WARN_ONCE(word != EEPROM_CHIP_ID && index == 0,
331 "%s: invalid access of EEPROM word %d\n",
332 wiphy_name(rt2x00dev->hw->wiphy), word);
333
334 return index;
335 }
336
337 static void *rt2800_eeprom_addr(struct rt2x00_dev *rt2x00dev,
338 const enum rt2800_eeprom_word word)
339 {
340 unsigned int index;
341
342 index = rt2800_eeprom_word_index(rt2x00dev, word);
343 return rt2x00_eeprom_addr(rt2x00dev, index);
344 }
345
346 static void rt2800_eeprom_read(struct rt2x00_dev *rt2x00dev,
347 const enum rt2800_eeprom_word word, u16 *data)
348 {
349 unsigned int index;
350
351 index = rt2800_eeprom_word_index(rt2x00dev, word);
352 rt2x00_eeprom_read(rt2x00dev, index, data);
353 }
354
355 static void rt2800_eeprom_write(struct rt2x00_dev *rt2x00dev,
356 const enum rt2800_eeprom_word word, u16 data)
357 {
358 unsigned int index;
359
360 index = rt2800_eeprom_word_index(rt2x00dev, word);
361 rt2x00_eeprom_write(rt2x00dev, index, data);
362 }
363
364 static void rt2800_eeprom_read_from_array(struct rt2x00_dev *rt2x00dev,
365 const enum rt2800_eeprom_word array,
366 unsigned int offset,
367 u16 *data)
368 {
369 unsigned int index;
370
371 index = rt2800_eeprom_word_index(rt2x00dev, array);
372 rt2x00_eeprom_read(rt2x00dev, index + offset, data);
373 }
374
375 static int rt2800_enable_wlan_rt3290(struct rt2x00_dev *rt2x00dev)
376 {
377 u32 reg;
378 int i, count;
379
380 rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, &reg);
381 if (rt2x00_get_field32(reg, WLAN_EN))
382 return 0;
383
384 rt2x00_set_field32(&reg, WLAN_GPIO_OUT_OE_BIT_ALL, 0xff);
385 rt2x00_set_field32(&reg, FRC_WL_ANT_SET, 1);
386 rt2x00_set_field32(&reg, WLAN_CLK_EN, 0);
387 rt2x00_set_field32(&reg, WLAN_EN, 1);
388 rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
389
390 udelay(REGISTER_BUSY_DELAY);
391
392 count = 0;
393 do {
394 /*
395 * Check PLL_LD & XTAL_RDY.
396 */
397 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
398 rt2800_register_read(rt2x00dev, CMB_CTRL, &reg);
399 if (rt2x00_get_field32(reg, PLL_LD) &&
400 rt2x00_get_field32(reg, XTAL_RDY))
401 break;
402 udelay(REGISTER_BUSY_DELAY);
403 }
404
405 if (i >= REGISTER_BUSY_COUNT) {
406
407 if (count >= 10)
408 return -EIO;
409
410 rt2800_register_write(rt2x00dev, 0x58, 0x018);
411 udelay(REGISTER_BUSY_DELAY);
412 rt2800_register_write(rt2x00dev, 0x58, 0x418);
413 udelay(REGISTER_BUSY_DELAY);
414 rt2800_register_write(rt2x00dev, 0x58, 0x618);
415 udelay(REGISTER_BUSY_DELAY);
416 count++;
417 } else {
418 count = 0;
419 }
420
421 rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, &reg);
422 rt2x00_set_field32(&reg, PCIE_APP0_CLK_REQ, 0);
423 rt2x00_set_field32(&reg, WLAN_CLK_EN, 1);
424 rt2x00_set_field32(&reg, WLAN_RESET, 1);
425 rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
426 udelay(10);
427 rt2x00_set_field32(&reg, WLAN_RESET, 0);
428 rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
429 udelay(10);
430 rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, 0x7fffffff);
431 } while (count != 0);
432
433 return 0;
434 }
435
436 void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
437 const u8 command, const u8 token,
438 const u8 arg0, const u8 arg1)
439 {
440 u32 reg;
441
442 /*
443 * SOC devices don't support MCU requests.
444 */
445 if (rt2x00_is_soc(rt2x00dev))
446 return;
447
448 mutex_lock(&rt2x00dev->csr_mutex);
449
450 /*
451 * Wait until the MCU becomes available, afterwards we
452 * can safely write the new data into the register.
453 */
454 if (WAIT_FOR_MCU(rt2x00dev, &reg)) {
455 rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_OWNER, 1);
456 rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_CMD_TOKEN, token);
457 rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG0, arg0);
458 rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG1, arg1);
459 rt2800_register_write_lock(rt2x00dev, H2M_MAILBOX_CSR, reg);
460
461 reg = 0;
462 rt2x00_set_field32(&reg, HOST_CMD_CSR_HOST_COMMAND, command);
463 rt2800_register_write_lock(rt2x00dev, HOST_CMD_CSR, reg);
464 }
465
466 mutex_unlock(&rt2x00dev->csr_mutex);
467 }
468 EXPORT_SYMBOL_GPL(rt2800_mcu_request);
469
470 int rt2800_wait_csr_ready(struct rt2x00_dev *rt2x00dev)
471 {
472 unsigned int i = 0;
473 u32 reg;
474
475 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
476 rt2800_register_read(rt2x00dev, MAC_CSR0, &reg);
477 if (reg && reg != ~0)
478 return 0;
479 msleep(1);
480 }
481
482 rt2x00_err(rt2x00dev, "Unstable hardware\n");
483 return -EBUSY;
484 }
485 EXPORT_SYMBOL_GPL(rt2800_wait_csr_ready);
486
487 int rt2800_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
488 {
489 unsigned int i;
490 u32 reg;
491
492 /*
493 * Some devices are really slow to respond here. Wait a whole second
494 * before timing out.
495 */
496 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
497 rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
498 if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) &&
499 !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY))
500 return 0;
501
502 msleep(10);
503 }
504
505 rt2x00_err(rt2x00dev, "WPDMA TX/RX busy [0x%08x]\n", reg);
506 return -EACCES;
507 }
508 EXPORT_SYMBOL_GPL(rt2800_wait_wpdma_ready);
509
510 void rt2800_disable_wpdma(struct rt2x00_dev *rt2x00dev)
511 {
512 u32 reg;
513
514 rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
515 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
516 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
517 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
518 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
519 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
520 rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
521 }
522 EXPORT_SYMBOL_GPL(rt2800_disable_wpdma);
523
524 static bool rt2800_check_firmware_crc(const u8 *data, const size_t len)
525 {
526 u16 fw_crc;
527 u16 crc;
528
529 /*
530 * The last 2 bytes in the firmware array are the crc checksum itself,
531 * this means that we should never pass those 2 bytes to the crc
532 * algorithm.
533 */
534 fw_crc = (data[len - 2] << 8 | data[len - 1]);
535
536 /*
537 * Use the crc ccitt algorithm.
538 * This will return the same value as the legacy driver which
539 * used bit ordering reversion on the both the firmware bytes
540 * before input input as well as on the final output.
541 * Obviously using crc ccitt directly is much more efficient.
542 */
543 crc = crc_ccitt(~0, data, len - 2);
544
545 /*
546 * There is a small difference between the crc-itu-t + bitrev and
547 * the crc-ccitt crc calculation. In the latter method the 2 bytes
548 * will be swapped, use swab16 to convert the crc to the correct
549 * value.
550 */
551 crc = swab16(crc);
552
553 return fw_crc == crc;
554 }
555
556 int rt2800_check_firmware(struct rt2x00_dev *rt2x00dev,
557 const u8 *data, const size_t len)
558 {
559 size_t offset = 0;
560 size_t fw_len;
561 bool multiple;
562
563 /*
564 * PCI(e) & SOC devices require firmware with a length
565 * of 8kb. USB devices require firmware files with a length
566 * of 4kb. Certain USB chipsets however require different firmware,
567 * which Ralink only provides attached to the original firmware
568 * file. Thus for USB devices, firmware files have a length
569 * which is a multiple of 4kb. The firmware for rt3290 chip also
570 * have a length which is a multiple of 4kb.
571 */
572 if (rt2x00_is_usb(rt2x00dev) || rt2x00_rt(rt2x00dev, RT3290))
573 fw_len = 4096;
574 else
575 fw_len = 8192;
576
577 multiple = true;
578 /*
579 * Validate the firmware length
580 */
581 if (len != fw_len && (!multiple || (len % fw_len) != 0))
582 return FW_BAD_LENGTH;
583
584 /*
585 * Check if the chipset requires one of the upper parts
586 * of the firmware.
587 */
588 if (rt2x00_is_usb(rt2x00dev) &&
589 !rt2x00_rt(rt2x00dev, RT2860) &&
590 !rt2x00_rt(rt2x00dev, RT2872) &&
591 !rt2x00_rt(rt2x00dev, RT3070) &&
592 ((len / fw_len) == 1))
593 return FW_BAD_VERSION;
594
595 /*
596 * 8kb firmware files must be checked as if it were
597 * 2 separate firmware files.
598 */
599 while (offset < len) {
600 if (!rt2800_check_firmware_crc(data + offset, fw_len))
601 return FW_BAD_CRC;
602
603 offset += fw_len;
604 }
605
606 return FW_OK;
607 }
608 EXPORT_SYMBOL_GPL(rt2800_check_firmware);
609
610 int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev,
611 const u8 *data, const size_t len)
612 {
613 unsigned int i;
614 u32 reg;
615 int retval;
616
617 if (rt2x00_rt(rt2x00dev, RT3290)) {
618 retval = rt2800_enable_wlan_rt3290(rt2x00dev);
619 if (retval)
620 return -EBUSY;
621 }
622
623 /*
624 * If driver doesn't wake up firmware here,
625 * rt2800_load_firmware will hang forever when interface is up again.
626 */
627 rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0x00000000);
628
629 /*
630 * Wait for stable hardware.
631 */
632 if (rt2800_wait_csr_ready(rt2x00dev))
633 return -EBUSY;
634
635 if (rt2x00_is_pci(rt2x00dev)) {
636 if (rt2x00_rt(rt2x00dev, RT3290) ||
637 rt2x00_rt(rt2x00dev, RT3572) ||
638 rt2x00_rt(rt2x00dev, RT5390) ||
639 rt2x00_rt(rt2x00dev, RT5392)) {
640 rt2800_register_read(rt2x00dev, AUX_CTRL, &reg);
641 rt2x00_set_field32(&reg, AUX_CTRL_FORCE_PCIE_CLK, 1);
642 rt2x00_set_field32(&reg, AUX_CTRL_WAKE_PCIE_EN, 1);
643 rt2800_register_write(rt2x00dev, AUX_CTRL, reg);
644 }
645 rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000002);
646 }
647
648 rt2800_disable_wpdma(rt2x00dev);
649
650 /*
651 * Write firmware to the device.
652 */
653 rt2800_drv_write_firmware(rt2x00dev, data, len);
654
655 /*
656 * Wait for device to stabilize.
657 */
658 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
659 rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
660 if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY))
661 break;
662 msleep(1);
663 }
664
665 if (i == REGISTER_BUSY_COUNT) {
666 rt2x00_err(rt2x00dev, "PBF system register not ready\n");
667 return -EBUSY;
668 }
669
670 /*
671 * Disable DMA, will be reenabled later when enabling
672 * the radio.
673 */
674 rt2800_disable_wpdma(rt2x00dev);
675
676 /*
677 * Initialize firmware.
678 */
679 rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
680 rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
681 if (rt2x00_is_usb(rt2x00dev)) {
682 rt2800_register_write(rt2x00dev, H2M_INT_SRC, 0);
683 rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0);
684 }
685 msleep(1);
686
687 return 0;
688 }
689 EXPORT_SYMBOL_GPL(rt2800_load_firmware);
690
691 void rt2800_write_tx_data(struct queue_entry *entry,
692 struct txentry_desc *txdesc)
693 {
694 __le32 *txwi = rt2800_drv_get_txwi(entry);
695 u32 word;
696 int i;
697
698 /*
699 * Initialize TX Info descriptor
700 */
701 rt2x00_desc_read(txwi, 0, &word);
702 rt2x00_set_field32(&word, TXWI_W0_FRAG,
703 test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
704 rt2x00_set_field32(&word, TXWI_W0_MIMO_PS,
705 test_bit(ENTRY_TXD_HT_MIMO_PS, &txdesc->flags));
706 rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0);
707 rt2x00_set_field32(&word, TXWI_W0_TS,
708 test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
709 rt2x00_set_field32(&word, TXWI_W0_AMPDU,
710 test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags));
711 rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY,
712 txdesc->u.ht.mpdu_density);
713 rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->u.ht.txop);
714 rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->u.ht.mcs);
715 rt2x00_set_field32(&word, TXWI_W0_BW,
716 test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags));
717 rt2x00_set_field32(&word, TXWI_W0_SHORT_GI,
718 test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags));
719 rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->u.ht.stbc);
720 rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode);
721 rt2x00_desc_write(txwi, 0, word);
722
723 rt2x00_desc_read(txwi, 1, &word);
724 rt2x00_set_field32(&word, TXWI_W1_ACK,
725 test_bit(ENTRY_TXD_ACK, &txdesc->flags));
726 rt2x00_set_field32(&word, TXWI_W1_NSEQ,
727 test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
728 rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->u.ht.ba_size);
729 rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID,
730 test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ?
731 txdesc->key_idx : txdesc->u.ht.wcid);
732 rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT,
733 txdesc->length);
734 rt2x00_set_field32(&word, TXWI_W1_PACKETID_QUEUE, entry->queue->qid);
735 rt2x00_set_field32(&word, TXWI_W1_PACKETID_ENTRY, (entry->entry_idx % 3) + 1);
736 rt2x00_desc_write(txwi, 1, word);
737
738 /*
739 * Always write 0 to IV/EIV fields (word 2 and 3), hardware will insert
740 * the IV from the IVEIV register when TXD_W3_WIV is set to 0.
741 * When TXD_W3_WIV is set to 1 it will use the IV data
742 * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which
743 * crypto entry in the registers should be used to encrypt the frame.
744 *
745 * Nulify all remaining words as well, we don't know how to program them.
746 */
747 for (i = 2; i < entry->queue->winfo_size / sizeof(__le32); i++)
748 _rt2x00_desc_write(txwi, i, 0);
749 }
750 EXPORT_SYMBOL_GPL(rt2800_write_tx_data);
751
752 static int rt2800_agc_to_rssi(struct rt2x00_dev *rt2x00dev, u32 rxwi_w2)
753 {
754 s8 rssi0 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI0);
755 s8 rssi1 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI1);
756 s8 rssi2 = rt2x00_get_field32(rxwi_w2, RXWI_W2_RSSI2);
757 u16 eeprom;
758 u8 offset0;
759 u8 offset1;
760 u8 offset2;
761
762 if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
763 rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &eeprom);
764 offset0 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG_OFFSET0);
765 offset1 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG_OFFSET1);
766 rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom);
767 offset2 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_OFFSET2);
768 } else {
769 rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &eeprom);
770 offset0 = rt2x00_get_field16(eeprom, EEPROM_RSSI_A_OFFSET0);
771 offset1 = rt2x00_get_field16(eeprom, EEPROM_RSSI_A_OFFSET1);
772 rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom);
773 offset2 = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_OFFSET2);
774 }
775
776 /*
777 * Convert the value from the descriptor into the RSSI value
778 * If the value in the descriptor is 0, it is considered invalid
779 * and the default (extremely low) rssi value is assumed
780 */
781 rssi0 = (rssi0) ? (-12 - offset0 - rt2x00dev->lna_gain - rssi0) : -128;
782 rssi1 = (rssi1) ? (-12 - offset1 - rt2x00dev->lna_gain - rssi1) : -128;
783 rssi2 = (rssi2) ? (-12 - offset2 - rt2x00dev->lna_gain - rssi2) : -128;
784
785 /*
786 * mac80211 only accepts a single RSSI value. Calculating the
787 * average doesn't deliver a fair answer either since -60:-60 would
788 * be considered equally good as -50:-70 while the second is the one
789 * which gives less energy...
790 */
791 rssi0 = max(rssi0, rssi1);
792 return (int)max(rssi0, rssi2);
793 }
794
795 void rt2800_process_rxwi(struct queue_entry *entry,
796 struct rxdone_entry_desc *rxdesc)
797 {
798 __le32 *rxwi = (__le32 *) entry->skb->data;
799 u32 word;
800
801 rt2x00_desc_read(rxwi, 0, &word);
802
803 rxdesc->cipher = rt2x00_get_field32(word, RXWI_W0_UDF);
804 rxdesc->size = rt2x00_get_field32(word, RXWI_W0_MPDU_TOTAL_BYTE_COUNT);
805
806 rt2x00_desc_read(rxwi, 1, &word);
807
808 if (rt2x00_get_field32(word, RXWI_W1_SHORT_GI))
809 rxdesc->flags |= RX_FLAG_SHORT_GI;
810
811 if (rt2x00_get_field32(word, RXWI_W1_BW))
812 rxdesc->flags |= RX_FLAG_40MHZ;
813
814 /*
815 * Detect RX rate, always use MCS as signal type.
816 */
817 rxdesc->dev_flags |= RXDONE_SIGNAL_MCS;
818 rxdesc->signal = rt2x00_get_field32(word, RXWI_W1_MCS);
819 rxdesc->rate_mode = rt2x00_get_field32(word, RXWI_W1_PHYMODE);
820
821 /*
822 * Mask of 0x8 bit to remove the short preamble flag.
823 */
824 if (rxdesc->rate_mode == RATE_MODE_CCK)
825 rxdesc->signal &= ~0x8;
826
827 rt2x00_desc_read(rxwi, 2, &word);
828
829 /*
830 * Convert descriptor AGC value to RSSI value.
831 */
832 rxdesc->rssi = rt2800_agc_to_rssi(entry->queue->rt2x00dev, word);
833 /*
834 * Remove RXWI descriptor from start of the buffer.
835 */
836 skb_pull(entry->skb, entry->queue->winfo_size);
837 }
838 EXPORT_SYMBOL_GPL(rt2800_process_rxwi);
839
840 void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi)
841 {
842 struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
843 struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
844 struct txdone_entry_desc txdesc;
845 u32 word;
846 u16 mcs, real_mcs;
847 int aggr, ampdu;
848
849 /*
850 * Obtain the status about this packet.
851 */
852 txdesc.flags = 0;
853 rt2x00_desc_read(txwi, 0, &word);
854
855 mcs = rt2x00_get_field32(word, TXWI_W0_MCS);
856 ampdu = rt2x00_get_field32(word, TXWI_W0_AMPDU);
857
858 real_mcs = rt2x00_get_field32(status, TX_STA_FIFO_MCS);
859 aggr = rt2x00_get_field32(status, TX_STA_FIFO_TX_AGGRE);
860
861 /*
862 * If a frame was meant to be sent as a single non-aggregated MPDU
863 * but ended up in an aggregate the used tx rate doesn't correlate
864 * with the one specified in the TXWI as the whole aggregate is sent
865 * with the same rate.
866 *
867 * For example: two frames are sent to rt2x00, the first one sets
868 * AMPDU=1 and requests MCS7 whereas the second frame sets AMDPU=0
869 * and requests MCS15. If the hw aggregates both frames into one
870 * AMDPU the tx status for both frames will contain MCS7 although
871 * the frame was sent successfully.
872 *
873 * Hence, replace the requested rate with the real tx rate to not
874 * confuse the rate control algortihm by providing clearly wrong
875 * data.
876 */
877 if (unlikely(aggr == 1 && ampdu == 0 && real_mcs != mcs)) {
878 skbdesc->tx_rate_idx = real_mcs;
879 mcs = real_mcs;
880 }
881
882 if (aggr == 1 || ampdu == 1)
883 __set_bit(TXDONE_AMPDU, &txdesc.flags);
884
885 /*
886 * Ralink has a retry mechanism using a global fallback
887 * table. We setup this fallback table to try the immediate
888 * lower rate for all rates. In the TX_STA_FIFO, the MCS field
889 * always contains the MCS used for the last transmission, be
890 * it successful or not.
891 */
892 if (rt2x00_get_field32(status, TX_STA_FIFO_TX_SUCCESS)) {
893 /*
894 * Transmission succeeded. The number of retries is
895 * mcs - real_mcs
896 */
897 __set_bit(TXDONE_SUCCESS, &txdesc.flags);
898 txdesc.retry = ((mcs > real_mcs) ? mcs - real_mcs : 0);
899 } else {
900 /*
901 * Transmission failed. The number of retries is
902 * always 7 in this case (for a total number of 8
903 * frames sent).
904 */
905 __set_bit(TXDONE_FAILURE, &txdesc.flags);
906 txdesc.retry = rt2x00dev->long_retry;
907 }
908
909 /*
910 * the frame was retried at least once
911 * -> hw used fallback rates
912 */
913 if (txdesc.retry)
914 __set_bit(TXDONE_FALLBACK, &txdesc.flags);
915
916 rt2x00lib_txdone(entry, &txdesc);
917 }
918 EXPORT_SYMBOL_GPL(rt2800_txdone_entry);
919
920 void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc)
921 {
922 struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
923 struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
924 unsigned int beacon_base;
925 unsigned int padding_len;
926 u32 orig_reg, reg;
927 const int txwi_desc_size = entry->queue->winfo_size;
928
929 /*
930 * Disable beaconing while we are reloading the beacon data,
931 * otherwise we might be sending out invalid data.
932 */
933 rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
934 orig_reg = reg;
935 rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
936 rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
937
938 /*
939 * Add space for the TXWI in front of the skb.
940 */
941 memset(skb_push(entry->skb, txwi_desc_size), 0, txwi_desc_size);
942
943 /*
944 * Register descriptor details in skb frame descriptor.
945 */
946 skbdesc->flags |= SKBDESC_DESC_IN_SKB;
947 skbdesc->desc = entry->skb->data;
948 skbdesc->desc_len = txwi_desc_size;
949
950 /*
951 * Add the TXWI for the beacon to the skb.
952 */
953 rt2800_write_tx_data(entry, txdesc);
954
955 /*
956 * Dump beacon to userspace through debugfs.
957 */
958 rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
959
960 /*
961 * Write entire beacon with TXWI and padding to register.
962 */
963 padding_len = roundup(entry->skb->len, 4) - entry->skb->len;
964 if (padding_len && skb_pad(entry->skb, padding_len)) {
965 rt2x00_err(rt2x00dev, "Failure padding beacon, aborting\n");
966 /* skb freed by skb_pad() on failure */
967 entry->skb = NULL;
968 rt2800_register_write(rt2x00dev, BCN_TIME_CFG, orig_reg);
969 return;
970 }
971
972 beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
973 rt2800_register_multiwrite(rt2x00dev, beacon_base, entry->skb->data,
974 entry->skb->len + padding_len);
975
976 /*
977 * Enable beaconing again.
978 */
979 rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 1);
980 rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
981
982 /*
983 * Clean up beacon skb.
984 */
985 dev_kfree_skb_any(entry->skb);
986 entry->skb = NULL;
987 }
988 EXPORT_SYMBOL_GPL(rt2800_write_beacon);
989
990 static inline void rt2800_clear_beacon_register(struct rt2x00_dev *rt2x00dev,
991 unsigned int beacon_base)
992 {
993 int i;
994 const int txwi_desc_size = rt2x00dev->bcn->winfo_size;
995
996 /*
997 * For the Beacon base registers we only need to clear
998 * the whole TXWI which (when set to 0) will invalidate
999 * the entire beacon.
1000 */
1001 for (i = 0; i < txwi_desc_size; i += sizeof(__le32))
1002 rt2800_register_write(rt2x00dev, beacon_base + i, 0);
1003 }
1004
1005 void rt2800_clear_beacon(struct queue_entry *entry)
1006 {
1007 struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
1008 u32 reg;
1009
1010 /*
1011 * Disable beaconing while we are reloading the beacon data,
1012 * otherwise we might be sending out invalid data.
1013 */
1014 rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
1015 rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
1016 rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
1017
1018 /*
1019 * Clear beacon.
1020 */
1021 rt2800_clear_beacon_register(rt2x00dev,
1022 HW_BEACON_OFFSET(entry->entry_idx));
1023
1024 /*
1025 * Enabled beaconing again.
1026 */
1027 rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 1);
1028 rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
1029 }
1030 EXPORT_SYMBOL_GPL(rt2800_clear_beacon);
1031
1032 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
1033 const struct rt2x00debug rt2800_rt2x00debug = {
1034 .owner = THIS_MODULE,
1035 .csr = {
1036 .read = rt2800_register_read,
1037 .write = rt2800_register_write,
1038 .flags = RT2X00DEBUGFS_OFFSET,
1039 .word_base = CSR_REG_BASE,
1040 .word_size = sizeof(u32),
1041 .word_count = CSR_REG_SIZE / sizeof(u32),
1042 },
1043 .eeprom = {
1044 /* NOTE: The local EEPROM access functions can't
1045 * be used here, use the generic versions instead.
1046 */
1047 .read = rt2x00_eeprom_read,
1048 .write = rt2x00_eeprom_write,
1049 .word_base = EEPROM_BASE,
1050 .word_size = sizeof(u16),
1051 .word_count = EEPROM_SIZE / sizeof(u16),
1052 },
1053 .bbp = {
1054 .read = rt2800_bbp_read,
1055 .write = rt2800_bbp_write,
1056 .word_base = BBP_BASE,
1057 .word_size = sizeof(u8),
1058 .word_count = BBP_SIZE / sizeof(u8),
1059 },
1060 .rf = {
1061 .read = rt2x00_rf_read,
1062 .write = rt2800_rf_write,
1063 .word_base = RF_BASE,
1064 .word_size = sizeof(u32),
1065 .word_count = RF_SIZE / sizeof(u32),
1066 },
1067 .rfcsr = {
1068 .read = rt2800_rfcsr_read,
1069 .write = rt2800_rfcsr_write,
1070 .word_base = RFCSR_BASE,
1071 .word_size = sizeof(u8),
1072 .word_count = RFCSR_SIZE / sizeof(u8),
1073 },
1074 };
1075 EXPORT_SYMBOL_GPL(rt2800_rt2x00debug);
1076 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
1077
1078 int rt2800_rfkill_poll(struct rt2x00_dev *rt2x00dev)
1079 {
1080 u32 reg;
1081
1082 if (rt2x00_rt(rt2x00dev, RT3290)) {
1083 rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, &reg);
1084 return rt2x00_get_field32(reg, WLAN_GPIO_IN_BIT0);
1085 } else {
1086 rt2800_register_read(rt2x00dev, GPIO_CTRL, &reg);
1087 return rt2x00_get_field32(reg, GPIO_CTRL_VAL2);
1088 }
1089 }
1090 EXPORT_SYMBOL_GPL(rt2800_rfkill_poll);
1091
1092 #ifdef CONFIG_RT2X00_LIB_LEDS
1093 static void rt2800_brightness_set(struct led_classdev *led_cdev,
1094 enum led_brightness brightness)
1095 {
1096 struct rt2x00_led *led =
1097 container_of(led_cdev, struct rt2x00_led, led_dev);
1098 unsigned int enabled = brightness != LED_OFF;
1099 unsigned int bg_mode =
1100 (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
1101 unsigned int polarity =
1102 rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
1103 EEPROM_FREQ_LED_POLARITY);
1104 unsigned int ledmode =
1105 rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
1106 EEPROM_FREQ_LED_MODE);
1107 u32 reg;
1108
1109 /* Check for SoC (SOC devices don't support MCU requests) */
1110 if (rt2x00_is_soc(led->rt2x00dev)) {
1111 rt2800_register_read(led->rt2x00dev, LED_CFG, &reg);
1112
1113 /* Set LED Polarity */
1114 rt2x00_set_field32(&reg, LED_CFG_LED_POLAR, polarity);
1115
1116 /* Set LED Mode */
1117 if (led->type == LED_TYPE_RADIO) {
1118 rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE,
1119 enabled ? 3 : 0);
1120 } else if (led->type == LED_TYPE_ASSOC) {
1121 rt2x00_set_field32(&reg, LED_CFG_Y_LED_MODE,
1122 enabled ? 3 : 0);
1123 } else if (led->type == LED_TYPE_QUALITY) {
1124 rt2x00_set_field32(&reg, LED_CFG_R_LED_MODE,
1125 enabled ? 3 : 0);
1126 }
1127
1128 rt2800_register_write(led->rt2x00dev, LED_CFG, reg);
1129
1130 } else {
1131 if (led->type == LED_TYPE_RADIO) {
1132 rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
1133 enabled ? 0x20 : 0);
1134 } else if (led->type == LED_TYPE_ASSOC) {
1135 rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
1136 enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
1137 } else if (led->type == LED_TYPE_QUALITY) {
1138 /*
1139 * The brightness is divided into 6 levels (0 - 5),
1140 * The specs tell us the following levels:
1141 * 0, 1 ,3, 7, 15, 31
1142 * to determine the level in a simple way we can simply
1143 * work with bitshifting:
1144 * (1 << level) - 1
1145 */
1146 rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
1147 (1 << brightness / (LED_FULL / 6)) - 1,
1148 polarity);
1149 }
1150 }
1151 }
1152
1153 static void rt2800_init_led(struct rt2x00_dev *rt2x00dev,
1154 struct rt2x00_led *led, enum led_type type)
1155 {
1156 led->rt2x00dev = rt2x00dev;
1157 led->type = type;
1158 led->led_dev.brightness_set = rt2800_brightness_set;
1159 led->flags = LED_INITIALIZED;
1160 }
1161 #endif /* CONFIG_RT2X00_LIB_LEDS */
1162
1163 /*
1164 * Configuration handlers.
1165 */
1166 static void rt2800_config_wcid(struct rt2x00_dev *rt2x00dev,
1167 const u8 *address,
1168 int wcid)
1169 {
1170 struct mac_wcid_entry wcid_entry;
1171 u32 offset;
1172
1173 offset = MAC_WCID_ENTRY(wcid);
1174
1175 memset(&wcid_entry, 0xff, sizeof(wcid_entry));
1176 if (address)
1177 memcpy(wcid_entry.mac, address, ETH_ALEN);
1178
1179 rt2800_register_multiwrite(rt2x00dev, offset,
1180 &wcid_entry, sizeof(wcid_entry));
1181 }
1182
1183 static void rt2800_delete_wcid_attr(struct rt2x00_dev *rt2x00dev, int wcid)
1184 {
1185 u32 offset;
1186 offset = MAC_WCID_ATTR_ENTRY(wcid);
1187 rt2800_register_write(rt2x00dev, offset, 0);
1188 }
1189
1190 static void rt2800_config_wcid_attr_bssidx(struct rt2x00_dev *rt2x00dev,
1191 int wcid, u32 bssidx)
1192 {
1193 u32 offset = MAC_WCID_ATTR_ENTRY(wcid);
1194 u32 reg;
1195
1196 /*
1197 * The BSS Idx numbers is split in a main value of 3 bits,
1198 * and a extended field for adding one additional bit to the value.
1199 */
1200 rt2800_register_read(rt2x00dev, offset, &reg);
1201 rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX, (bssidx & 0x7));
1202 rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX_EXT,
1203 (bssidx & 0x8) >> 3);
1204 rt2800_register_write(rt2x00dev, offset, reg);
1205 }
1206
1207 static void rt2800_config_wcid_attr_cipher(struct rt2x00_dev *rt2x00dev,
1208 struct rt2x00lib_crypto *crypto,
1209 struct ieee80211_key_conf *key)
1210 {
1211 struct mac_iveiv_entry iveiv_entry;
1212 u32 offset;
1213 u32 reg;
1214
1215 offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx);
1216
1217 if (crypto->cmd == SET_KEY) {
1218 rt2800_register_read(rt2x00dev, offset, &reg);
1219 rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB,
1220 !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
1221 /*
1222 * Both the cipher as the BSS Idx numbers are split in a main
1223 * value of 3 bits, and a extended field for adding one additional
1224 * bit to the value.
1225 */
1226 rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER,
1227 (crypto->cipher & 0x7));
1228 rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER_EXT,
1229 (crypto->cipher & 0x8) >> 3);
1230 rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
1231 rt2800_register_write(rt2x00dev, offset, reg);
1232 } else {
1233 /* Delete the cipher without touching the bssidx */
1234 rt2800_register_read(rt2x00dev, offset, &reg);
1235 rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB, 0);
1236 rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER, 0);
1237 rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER_EXT, 0);
1238 rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, 0);
1239 rt2800_register_write(rt2x00dev, offset, reg);
1240 }
1241
1242 offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
1243
1244 memset(&iveiv_entry, 0, sizeof(iveiv_entry));
1245 if ((crypto->cipher == CIPHER_TKIP) ||
1246 (crypto->cipher == CIPHER_TKIP_NO_MIC) ||
1247 (crypto->cipher == CIPHER_AES))
1248 iveiv_entry.iv[3] |= 0x20;
1249 iveiv_entry.iv[3] |= key->keyidx << 6;
1250 rt2800_register_multiwrite(rt2x00dev, offset,
1251 &iveiv_entry, sizeof(iveiv_entry));
1252 }
1253
1254 int rt2800_config_shared_key(struct rt2x00_dev *rt2x00dev,
1255 struct rt2x00lib_crypto *crypto,
1256 struct ieee80211_key_conf *key)
1257 {
1258 struct hw_key_entry key_entry;
1259 struct rt2x00_field32 field;
1260 u32 offset;
1261 u32 reg;
1262
1263 if (crypto->cmd == SET_KEY) {
1264 key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx;
1265
1266 memcpy(key_entry.key, crypto->key,
1267 sizeof(key_entry.key));
1268 memcpy(key_entry.tx_mic, crypto->tx_mic,
1269 sizeof(key_entry.tx_mic));
1270 memcpy(key_entry.rx_mic, crypto->rx_mic,
1271 sizeof(key_entry.rx_mic));
1272
1273 offset = SHARED_KEY_ENTRY(key->hw_key_idx);
1274 rt2800_register_multiwrite(rt2x00dev, offset,
1275 &key_entry, sizeof(key_entry));
1276 }
1277
1278 /*
1279 * The cipher types are stored over multiple registers
1280 * starting with SHARED_KEY_MODE_BASE each word will have
1281 * 32 bits and contains the cipher types for 2 bssidx each.
1282 * Using the correct defines correctly will cause overhead,
1283 * so just calculate the correct offset.
1284 */
1285 field.bit_offset = 4 * (key->hw_key_idx % 8);
1286 field.bit_mask = 0x7 << field.bit_offset;
1287
1288 offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
1289
1290 rt2800_register_read(rt2x00dev, offset, &reg);
1291 rt2x00_set_field32(&reg, field,
1292 (crypto->cmd == SET_KEY) * crypto->cipher);
1293 rt2800_register_write(rt2x00dev, offset, reg);
1294
1295 /*
1296 * Update WCID information
1297 */
1298 rt2800_config_wcid(rt2x00dev, crypto->address, key->hw_key_idx);
1299 rt2800_config_wcid_attr_bssidx(rt2x00dev, key->hw_key_idx,
1300 crypto->bssidx);
1301 rt2800_config_wcid_attr_cipher(rt2x00dev, crypto, key);
1302
1303 return 0;
1304 }
1305 EXPORT_SYMBOL_GPL(rt2800_config_shared_key);
1306
1307 static inline int rt2800_find_wcid(struct rt2x00_dev *rt2x00dev)
1308 {
1309 struct mac_wcid_entry wcid_entry;
1310 int idx;
1311 u32 offset;
1312
1313 /*
1314 * Search for the first free WCID entry and return the corresponding
1315 * index.
1316 *
1317 * Make sure the WCID starts _after_ the last possible shared key
1318 * entry (>32).
1319 *
1320 * Since parts of the pairwise key table might be shared with
1321 * the beacon frame buffers 6 & 7 we should only write into the
1322 * first 222 entries.
1323 */
1324 for (idx = 33; idx <= 222; idx++) {
1325 offset = MAC_WCID_ENTRY(idx);
1326 rt2800_register_multiread(rt2x00dev, offset, &wcid_entry,
1327 sizeof(wcid_entry));
1328 if (is_broadcast_ether_addr(wcid_entry.mac))
1329 return idx;
1330 }
1331
1332 /*
1333 * Use -1 to indicate that we don't have any more space in the WCID
1334 * table.
1335 */
1336 return -1;
1337 }
1338
1339 int rt2800_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
1340 struct rt2x00lib_crypto *crypto,
1341 struct ieee80211_key_conf *key)
1342 {
1343 struct hw_key_entry key_entry;
1344 u32 offset;
1345
1346 if (crypto->cmd == SET_KEY) {
1347 /*
1348 * Allow key configuration only for STAs that are
1349 * known by the hw.
1350 */
1351 if (crypto->wcid < 0)
1352 return -ENOSPC;
1353 key->hw_key_idx = crypto->wcid;
1354
1355 memcpy(key_entry.key, crypto->key,
1356 sizeof(key_entry.key));
1357 memcpy(key_entry.tx_mic, crypto->tx_mic,
1358 sizeof(key_entry.tx_mic));
1359 memcpy(key_entry.rx_mic, crypto->rx_mic,
1360 sizeof(key_entry.rx_mic));
1361
1362 offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
1363 rt2800_register_multiwrite(rt2x00dev, offset,
1364 &key_entry, sizeof(key_entry));
1365 }
1366
1367 /*
1368 * Update WCID information
1369 */
1370 rt2800_config_wcid_attr_cipher(rt2x00dev, crypto, key);
1371
1372 return 0;
1373 }
1374 EXPORT_SYMBOL_GPL(rt2800_config_pairwise_key);
1375
1376 int rt2800_sta_add(struct rt2x00_dev *rt2x00dev, struct ieee80211_vif *vif,
1377 struct ieee80211_sta *sta)
1378 {
1379 int wcid;
1380 struct rt2x00_sta *sta_priv = sta_to_rt2x00_sta(sta);
1381
1382 /*
1383 * Find next free WCID.
1384 */
1385 wcid = rt2800_find_wcid(rt2x00dev);
1386
1387 /*
1388 * Store selected wcid even if it is invalid so that we can
1389 * later decide if the STA is uploaded into the hw.
1390 */
1391 sta_priv->wcid = wcid;
1392
1393 /*
1394 * No space left in the device, however, we can still communicate
1395 * with the STA -> No error.
1396 */
1397 if (wcid < 0)
1398 return 0;
1399
1400 /*
1401 * Clean up WCID attributes and write STA address to the device.
1402 */
1403 rt2800_delete_wcid_attr(rt2x00dev, wcid);
1404 rt2800_config_wcid(rt2x00dev, sta->addr, wcid);
1405 rt2800_config_wcid_attr_bssidx(rt2x00dev, wcid,
1406 rt2x00lib_get_bssidx(rt2x00dev, vif));
1407 return 0;
1408 }
1409 EXPORT_SYMBOL_GPL(rt2800_sta_add);
1410
1411 int rt2800_sta_remove(struct rt2x00_dev *rt2x00dev, int wcid)
1412 {
1413 /*
1414 * Remove WCID entry, no need to clean the attributes as they will
1415 * get renewed when the WCID is reused.
1416 */
1417 rt2800_config_wcid(rt2x00dev, NULL, wcid);
1418
1419 return 0;
1420 }
1421 EXPORT_SYMBOL_GPL(rt2800_sta_remove);
1422
1423 void rt2800_config_filter(struct rt2x00_dev *rt2x00dev,
1424 const unsigned int filter_flags)
1425 {
1426 u32 reg;
1427
1428 /*
1429 * Start configuration steps.
1430 * Note that the version error will always be dropped
1431 * and broadcast frames will always be accepted since
1432 * there is no filter for it at this time.
1433 */
1434 rt2800_register_read(rt2x00dev, RX_FILTER_CFG, &reg);
1435 rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CRC_ERROR,
1436 !(filter_flags & FIF_FCSFAIL));
1437 rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PHY_ERROR,
1438 !(filter_flags & FIF_PLCPFAIL));
1439 rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_TO_ME,
1440 !(filter_flags & FIF_PROMISC_IN_BSS));
1441 rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0);
1442 rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_VER_ERROR, 1);
1443 rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_MULTICAST,
1444 !(filter_flags & FIF_ALLMULTI));
1445 rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BROADCAST, 0);
1446 rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_DUPLICATE, 1);
1447 rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END_ACK,
1448 !(filter_flags & FIF_CONTROL));
1449 rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END,
1450 !(filter_flags & FIF_CONTROL));
1451 rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_ACK,
1452 !(filter_flags & FIF_CONTROL));
1453 rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CTS,
1454 !(filter_flags & FIF_CONTROL));
1455 rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_RTS,
1456 !(filter_flags & FIF_CONTROL));
1457 rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PSPOLL,
1458 !(filter_flags & FIF_PSPOLL));
1459 rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BA, 0);
1460 rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BAR,
1461 !(filter_flags & FIF_CONTROL));
1462 rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CNTL,
1463 !(filter_flags & FIF_CONTROL));
1464 rt2800_register_write(rt2x00dev, RX_FILTER_CFG, reg);
1465 }
1466 EXPORT_SYMBOL_GPL(rt2800_config_filter);
1467
1468 void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf,
1469 struct rt2x00intf_conf *conf, const unsigned int flags)
1470 {
1471 u32 reg;
1472 bool update_bssid = false;
1473
1474 if (flags & CONFIG_UPDATE_TYPE) {
1475 /*
1476 * Enable synchronisation.
1477 */
1478 rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
1479 rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, conf->sync);
1480 rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
1481
1482 if (conf->sync == TSF_SYNC_AP_NONE) {
1483 /*
1484 * Tune beacon queue transmit parameters for AP mode
1485 */
1486 rt2800_register_read(rt2x00dev, TBTT_SYNC_CFG, &reg);
1487 rt2x00_set_field32(&reg, TBTT_SYNC_CFG_BCN_CWMIN, 0);
1488 rt2x00_set_field32(&reg, TBTT_SYNC_CFG_BCN_AIFSN, 1);
1489 rt2x00_set_field32(&reg, TBTT_SYNC_CFG_BCN_EXP_WIN, 32);
1490 rt2x00_set_field32(&reg, TBTT_SYNC_CFG_TBTT_ADJUST, 0);
1491 rt2800_register_write(rt2x00dev, TBTT_SYNC_CFG, reg);
1492 } else {
1493 rt2800_register_read(rt2x00dev, TBTT_SYNC_CFG, &reg);
1494 rt2x00_set_field32(&reg, TBTT_SYNC_CFG_BCN_CWMIN, 4);
1495 rt2x00_set_field32(&reg, TBTT_SYNC_CFG_BCN_AIFSN, 2);
1496 rt2x00_set_field32(&reg, TBTT_SYNC_CFG_BCN_EXP_WIN, 32);
1497 rt2x00_set_field32(&reg, TBTT_SYNC_CFG_TBTT_ADJUST, 16);
1498 rt2800_register_write(rt2x00dev, TBTT_SYNC_CFG, reg);
1499 }
1500 }
1501
1502 if (flags & CONFIG_UPDATE_MAC) {
1503 if (flags & CONFIG_UPDATE_TYPE &&
1504 conf->sync == TSF_SYNC_AP_NONE) {
1505 /*
1506 * The BSSID register has to be set to our own mac
1507 * address in AP mode.
1508 */
1509 memcpy(conf->bssid, conf->mac, sizeof(conf->mac));
1510 update_bssid = true;
1511 }
1512
1513 if (!is_zero_ether_addr((const u8 *)conf->mac)) {
1514 reg = le32_to_cpu(conf->mac[1]);
1515 rt2x00_set_field32(&reg, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff);
1516 conf->mac[1] = cpu_to_le32(reg);
1517 }
1518
1519 rt2800_register_multiwrite(rt2x00dev, MAC_ADDR_DW0,
1520 conf->mac, sizeof(conf->mac));
1521 }
1522
1523 if ((flags & CONFIG_UPDATE_BSSID) || update_bssid) {
1524 if (!is_zero_ether_addr((const u8 *)conf->bssid)) {
1525 reg = le32_to_cpu(conf->bssid[1]);
1526 rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_ID_MASK, 3);
1527 rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_BCN_NUM, 7);
1528 conf->bssid[1] = cpu_to_le32(reg);
1529 }
1530
1531 rt2800_register_multiwrite(rt2x00dev, MAC_BSSID_DW0,
1532 conf->bssid, sizeof(conf->bssid));
1533 }
1534 }
1535 EXPORT_SYMBOL_GPL(rt2800_config_intf);
1536
1537 static void rt2800_config_ht_opmode(struct rt2x00_dev *rt2x00dev,
1538 struct rt2x00lib_erp *erp)
1539 {
1540 bool any_sta_nongf = !!(erp->ht_opmode &
1541 IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
1542 u8 protection = erp->ht_opmode & IEEE80211_HT_OP_MODE_PROTECTION;
1543 u8 mm20_mode, mm40_mode, gf20_mode, gf40_mode;
1544 u16 mm20_rate, mm40_rate, gf20_rate, gf40_rate;
1545 u32 reg;
1546
1547 /* default protection rate for HT20: OFDM 24M */
1548 mm20_rate = gf20_rate = 0x4004;
1549
1550 /* default protection rate for HT40: duplicate OFDM 24M */
1551 mm40_rate = gf40_rate = 0x4084;
1552
1553 switch (protection) {
1554 case IEEE80211_HT_OP_MODE_PROTECTION_NONE:
1555 /*
1556 * All STAs in this BSS are HT20/40 but there might be
1557 * STAs not supporting greenfield mode.
1558 * => Disable protection for HT transmissions.
1559 */
1560 mm20_mode = mm40_mode = gf20_mode = gf40_mode = 0;
1561
1562 break;
1563 case IEEE80211_HT_OP_MODE_PROTECTION_20MHZ:
1564 /*
1565 * All STAs in this BSS are HT20 or HT20/40 but there
1566 * might be STAs not supporting greenfield mode.
1567 * => Protect all HT40 transmissions.
1568 */
1569 mm20_mode = gf20_mode = 0;
1570 mm40_mode = gf40_mode = 2;
1571
1572 break;
1573 case IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER:
1574 /*
1575 * Nonmember protection:
1576 * According to 802.11n we _should_ protect all
1577 * HT transmissions (but we don't have to).
1578 *
1579 * But if cts_protection is enabled we _shall_ protect
1580 * all HT transmissions using a CCK rate.
1581 *
1582 * And if any station is non GF we _shall_ protect
1583 * GF transmissions.
1584 *
1585 * We decide to protect everything
1586 * -> fall through to mixed mode.
1587 */
1588 case IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED:
1589 /*
1590 * Legacy STAs are present
1591 * => Protect all HT transmissions.
1592 */
1593 mm20_mode = mm40_mode = gf20_mode = gf40_mode = 2;
1594
1595 /*
1596 * If erp protection is needed we have to protect HT
1597 * transmissions with CCK 11M long preamble.
1598 */
1599 if (erp->cts_protection) {
1600 /* don't duplicate RTS/CTS in CCK mode */
1601 mm20_rate = mm40_rate = 0x0003;
1602 gf20_rate = gf40_rate = 0x0003;
1603 }
1604 break;
1605 }
1606
1607 /* check for STAs not supporting greenfield mode */
1608 if (any_sta_nongf)
1609 gf20_mode = gf40_mode = 2;
1610
1611 /* Update HT protection config */
1612 rt2800_register_read(rt2x00dev, MM20_PROT_CFG, &reg);
1613 rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_RATE, mm20_rate);
1614 rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_CTRL, mm20_mode);
1615 rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg);
1616
1617 rt2800_register_read(rt2x00dev, MM40_PROT_CFG, &reg);
1618 rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_RATE, mm40_rate);
1619 rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_CTRL, mm40_mode);
1620 rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg);
1621
1622 rt2800_register_read(rt2x00dev, GF20_PROT_CFG, &reg);
1623 rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_RATE, gf20_rate);
1624 rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_CTRL, gf20_mode);
1625 rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg);
1626
1627 rt2800_register_read(rt2x00dev, GF40_PROT_CFG, &reg);
1628 rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_RATE, gf40_rate);
1629 rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_CTRL, gf40_mode);
1630 rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg);
1631 }
1632
1633 void rt2800_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_erp *erp,
1634 u32 changed)
1635 {
1636 u32 reg;
1637
1638 if (changed & BSS_CHANGED_ERP_PREAMBLE) {
1639 rt2800_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
1640 rt2x00_set_field32(&reg, AUTO_RSP_CFG_BAC_ACK_POLICY,
1641 !!erp->short_preamble);
1642 rt2x00_set_field32(&reg, AUTO_RSP_CFG_AR_PREAMBLE,
1643 !!erp->short_preamble);
1644 rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
1645 }
1646
1647 if (changed & BSS_CHANGED_ERP_CTS_PROT) {
1648 rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
1649 rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_CTRL,
1650 erp->cts_protection ? 2 : 0);
1651 rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
1652 }
1653
1654 if (changed & BSS_CHANGED_BASIC_RATES) {
1655 rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE,
1656 erp->basic_rates);
1657 rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
1658 }
1659
1660 if (changed & BSS_CHANGED_ERP_SLOT) {
1661 rt2800_register_read(rt2x00dev, BKOFF_SLOT_CFG, &reg);
1662 rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_SLOT_TIME,
1663 erp->slot_time);
1664 rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
1665
1666 rt2800_register_read(rt2x00dev, XIFS_TIME_CFG, &reg);
1667 rt2x00_set_field32(&reg, XIFS_TIME_CFG_EIFS, erp->eifs);
1668 rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
1669 }
1670
1671 if (changed & BSS_CHANGED_BEACON_INT) {
1672 rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
1673 rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL,
1674 erp->beacon_int * 16);
1675 rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
1676 }
1677
1678 if (changed & BSS_CHANGED_HT)
1679 rt2800_config_ht_opmode(rt2x00dev, erp);
1680 }
1681 EXPORT_SYMBOL_GPL(rt2800_config_erp);
1682
1683 static void rt2800_config_3572bt_ant(struct rt2x00_dev *rt2x00dev)
1684 {
1685 u32 reg;
1686 u16 eeprom;
1687 u8 led_ctrl, led_g_mode, led_r_mode;
1688
1689 rt2800_register_read(rt2x00dev, GPIO_SWITCH, &reg);
1690 if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
1691 rt2x00_set_field32(&reg, GPIO_SWITCH_0, 1);
1692 rt2x00_set_field32(&reg, GPIO_SWITCH_1, 1);
1693 } else {
1694 rt2x00_set_field32(&reg, GPIO_SWITCH_0, 0);
1695 rt2x00_set_field32(&reg, GPIO_SWITCH_1, 0);
1696 }
1697 rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
1698
1699 rt2800_register_read(rt2x00dev, LED_CFG, &reg);
1700 led_g_mode = rt2x00_get_field32(reg, LED_CFG_LED_POLAR) ? 3 : 0;
1701 led_r_mode = rt2x00_get_field32(reg, LED_CFG_LED_POLAR) ? 0 : 3;
1702 if (led_g_mode != rt2x00_get_field32(reg, LED_CFG_G_LED_MODE) ||
1703 led_r_mode != rt2x00_get_field32(reg, LED_CFG_R_LED_MODE)) {
1704 rt2800_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
1705 led_ctrl = rt2x00_get_field16(eeprom, EEPROM_FREQ_LED_MODE);
1706 if (led_ctrl == 0 || led_ctrl > 0x40) {
1707 rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE, led_g_mode);
1708 rt2x00_set_field32(&reg, LED_CFG_R_LED_MODE, led_r_mode);
1709 rt2800_register_write(rt2x00dev, LED_CFG, reg);
1710 } else {
1711 rt2800_mcu_request(rt2x00dev, MCU_BAND_SELECT, 0xff,
1712 (led_g_mode << 2) | led_r_mode, 1);
1713 }
1714 }
1715 }
1716
1717 static void rt2800_set_ant_diversity(struct rt2x00_dev *rt2x00dev,
1718 enum antenna ant)
1719 {
1720 u32 reg;
1721 u8 eesk_pin = (ant == ANTENNA_A) ? 1 : 0;
1722 u8 gpio_bit3 = (ant == ANTENNA_A) ? 0 : 1;
1723
1724 if (rt2x00_is_pci(rt2x00dev)) {
1725 rt2800_register_read(rt2x00dev, E2PROM_CSR, &reg);
1726 rt2x00_set_field32(&reg, E2PROM_CSR_DATA_CLOCK, eesk_pin);
1727 rt2800_register_write(rt2x00dev, E2PROM_CSR, reg);
1728 } else if (rt2x00_is_usb(rt2x00dev))
1729 rt2800_mcu_request(rt2x00dev, MCU_ANT_SELECT, 0xff,
1730 eesk_pin, 0);
1731
1732 rt2800_register_read(rt2x00dev, GPIO_CTRL, &reg);
1733 rt2x00_set_field32(&reg, GPIO_CTRL_DIR3, 0);
1734 rt2x00_set_field32(&reg, GPIO_CTRL_VAL3, gpio_bit3);
1735 rt2800_register_write(rt2x00dev, GPIO_CTRL, reg);
1736 }
1737
1738 void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant)
1739 {
1740 u8 r1;
1741 u8 r3;
1742 u16 eeprom;
1743
1744 rt2800_bbp_read(rt2x00dev, 1, &r1);
1745 rt2800_bbp_read(rt2x00dev, 3, &r3);
1746
1747 if (rt2x00_rt(rt2x00dev, RT3572) &&
1748 test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags))
1749 rt2800_config_3572bt_ant(rt2x00dev);
1750
1751 /*
1752 * Configure the TX antenna.
1753 */
1754 switch (ant->tx_chain_num) {
1755 case 1:
1756 rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
1757 break;
1758 case 2:
1759 if (rt2x00_rt(rt2x00dev, RT3572) &&
1760 test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags))
1761 rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 1);
1762 else
1763 rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2);
1764 break;
1765 case 3:
1766 rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
1767 break;
1768 }
1769
1770 /*
1771 * Configure the RX antenna.
1772 */
1773 switch (ant->rx_chain_num) {
1774 case 1:
1775 if (rt2x00_rt(rt2x00dev, RT3070) ||
1776 rt2x00_rt(rt2x00dev, RT3090) ||
1777 rt2x00_rt(rt2x00dev, RT3352) ||
1778 rt2x00_rt(rt2x00dev, RT3390)) {
1779 rt2800_eeprom_read(rt2x00dev,
1780 EEPROM_NIC_CONF1, &eeprom);
1781 if (rt2x00_get_field16(eeprom,
1782 EEPROM_NIC_CONF1_ANT_DIVERSITY))
1783 rt2800_set_ant_diversity(rt2x00dev,
1784 rt2x00dev->default_ant.rx);
1785 }
1786 rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
1787 break;
1788 case 2:
1789 if (rt2x00_rt(rt2x00dev, RT3572) &&
1790 test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) {
1791 rt2x00_set_field8(&r3, BBP3_RX_ADC, 1);
1792 rt2x00_set_field8(&r3, BBP3_RX_ANTENNA,
1793 rt2x00dev->curr_band == IEEE80211_BAND_5GHZ);
1794 rt2800_set_ant_diversity(rt2x00dev, ANTENNA_B);
1795 } else {
1796 rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1);
1797 }
1798 break;
1799 case 3:
1800 rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2);
1801 break;
1802 }
1803
1804 rt2800_bbp_write(rt2x00dev, 3, r3);
1805 rt2800_bbp_write(rt2x00dev, 1, r1);
1806 }
1807 EXPORT_SYMBOL_GPL(rt2800_config_ant);
1808
1809 static void rt2800_config_lna_gain(struct rt2x00_dev *rt2x00dev,
1810 struct rt2x00lib_conf *libconf)
1811 {
1812 u16 eeprom;
1813 short lna_gain;
1814
1815 if (libconf->rf.channel <= 14) {
1816 rt2800_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
1817 lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG);
1818 } else if (libconf->rf.channel <= 64) {
1819 rt2800_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
1820 lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
1821 } else if (libconf->rf.channel <= 128) {
1822 rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom);
1823 lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1);
1824 } else {
1825 rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom);
1826 lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2);
1827 }
1828
1829 rt2x00dev->lna_gain = lna_gain;
1830 }
1831
1832 static void rt2800_config_channel_rf2xxx(struct rt2x00_dev *rt2x00dev,
1833 struct ieee80211_conf *conf,
1834 struct rf_channel *rf,
1835 struct channel_info *info)
1836 {
1837 rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
1838
1839 if (rt2x00dev->default_ant.tx_chain_num == 1)
1840 rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
1841
1842 if (rt2x00dev->default_ant.rx_chain_num == 1) {
1843 rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
1844 rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
1845 } else if (rt2x00dev->default_ant.rx_chain_num == 2)
1846 rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
1847
1848 if (rf->channel > 14) {
1849 /*
1850 * When TX power is below 0, we should increase it by 7 to
1851 * make it a positive value (Minimum value is -7).
1852 * However this means that values between 0 and 7 have
1853 * double meaning, and we should set a 7DBm boost flag.
1854 */
1855 rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST,
1856 (info->default_power1 >= 0));
1857
1858 if (info->default_power1 < 0)
1859 info->default_power1 += 7;
1860
1861 rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A, info->default_power1);
1862
1863 rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST,
1864 (info->default_power2 >= 0));
1865
1866 if (info->default_power2 < 0)
1867 info->default_power2 += 7;
1868
1869 rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A, info->default_power2);
1870 } else {
1871 rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G, info->default_power1);
1872 rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G, info->default_power2);
1873 }
1874
1875 rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf));
1876
1877 rt2800_rf_write(rt2x00dev, 1, rf->rf1);
1878 rt2800_rf_write(rt2x00dev, 2, rf->rf2);
1879 rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
1880 rt2800_rf_write(rt2x00dev, 4, rf->rf4);
1881
1882 udelay(200);
1883
1884 rt2800_rf_write(rt2x00dev, 1, rf->rf1);
1885 rt2800_rf_write(rt2x00dev, 2, rf->rf2);
1886 rt2800_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
1887 rt2800_rf_write(rt2x00dev, 4, rf->rf4);
1888
1889 udelay(200);
1890
1891 rt2800_rf_write(rt2x00dev, 1, rf->rf1);
1892 rt2800_rf_write(rt2x00dev, 2, rf->rf2);
1893 rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
1894 rt2800_rf_write(rt2x00dev, 4, rf->rf4);
1895 }
1896
1897 static void rt2800_config_channel_rf3xxx(struct rt2x00_dev *rt2x00dev,
1898 struct ieee80211_conf *conf,
1899 struct rf_channel *rf,
1900 struct channel_info *info)
1901 {
1902 struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
1903 u8 rfcsr, calib_tx, calib_rx;
1904
1905 rt2800_rfcsr_write(rt2x00dev, 2, rf->rf1);
1906
1907 rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr);
1908 rt2x00_set_field8(&rfcsr, RFCSR3_K, rf->rf3);
1909 rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
1910
1911 rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr);
1912 rt2x00_set_field8(&rfcsr, RFCSR6_R1, rf->rf2);
1913 rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
1914
1915 rt2800_rfcsr_read(rt2x00dev, 12, &rfcsr);
1916 rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, info->default_power1);
1917 rt2800_rfcsr_write(rt2x00dev, 12, rfcsr);
1918
1919 rt2800_rfcsr_read(rt2x00dev, 13, &rfcsr);
1920 rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER, info->default_power2);
1921 rt2800_rfcsr_write(rt2x00dev, 13, rfcsr);
1922
1923 rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr);
1924 rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0);
1925 rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD,
1926 rt2x00dev->default_ant.rx_chain_num <= 1);
1927 rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD,
1928 rt2x00dev->default_ant.rx_chain_num <= 2);
1929 rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0);
1930 rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD,
1931 rt2x00dev->default_ant.tx_chain_num <= 1);
1932 rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD,
1933 rt2x00dev->default_ant.tx_chain_num <= 2);
1934 rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
1935
1936 rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
1937 rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
1938 rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
1939 msleep(1);
1940 rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
1941 rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
1942
1943 rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr);
1944 rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
1945 rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
1946
1947 if (rt2x00_rt(rt2x00dev, RT3390)) {
1948 calib_tx = conf_is_ht40(conf) ? 0x68 : 0x4f;
1949 calib_rx = conf_is_ht40(conf) ? 0x6f : 0x4f;
1950 } else {
1951 if (conf_is_ht40(conf)) {
1952 calib_tx = drv_data->calibration_bw40;
1953 calib_rx = drv_data->calibration_bw40;
1954 } else {
1955 calib_tx = drv_data->calibration_bw20;
1956 calib_rx = drv_data->calibration_bw20;
1957 }
1958 }
1959
1960 rt2800_rfcsr_read(rt2x00dev, 24, &rfcsr);
1961 rt2x00_set_field8(&rfcsr, RFCSR24_TX_CALIB, calib_tx);
1962 rt2800_rfcsr_write(rt2x00dev, 24, rfcsr);
1963
1964 rt2800_rfcsr_read(rt2x00dev, 31, &rfcsr);
1965 rt2x00_set_field8(&rfcsr, RFCSR31_RX_CALIB, calib_rx);
1966 rt2800_rfcsr_write(rt2x00dev, 31, rfcsr);
1967
1968 rt2800_rfcsr_read(rt2x00dev, 7, &rfcsr);
1969 rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
1970 rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
1971
1972 rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
1973 rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
1974 rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
1975 msleep(1);
1976 rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
1977 rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
1978 }
1979
1980 static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
1981 struct ieee80211_conf *conf,
1982 struct rf_channel *rf,
1983 struct channel_info *info)
1984 {
1985 struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
1986 u8 rfcsr;
1987 u32 reg;
1988
1989 if (rf->channel <= 14) {
1990 rt2800_bbp_write(rt2x00dev, 25, drv_data->bbp25);
1991 rt2800_bbp_write(rt2x00dev, 26, drv_data->bbp26);
1992 } else {
1993 rt2800_bbp_write(rt2x00dev, 25, 0x09);
1994 rt2800_bbp_write(rt2x00dev, 26, 0xff);
1995 }
1996
1997 rt2800_rfcsr_write(rt2x00dev, 2, rf->rf1);
1998 rt2800_rfcsr_write(rt2x00dev, 3, rf->rf3);
1999
2000 rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr);
2001 rt2x00_set_field8(&rfcsr, RFCSR6_R1, rf->rf2);
2002 if (rf->channel <= 14)
2003 rt2x00_set_field8(&rfcsr, RFCSR6_TXDIV, 2);
2004 else
2005 rt2x00_set_field8(&rfcsr, RFCSR6_TXDIV, 1);
2006 rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
2007
2008 rt2800_rfcsr_read(rt2x00dev, 5, &rfcsr);
2009 if (rf->channel <= 14)
2010 rt2x00_set_field8(&rfcsr, RFCSR5_R1, 1);
2011 else
2012 rt2x00_set_field8(&rfcsr, RFCSR5_R1, 2);
2013 rt2800_rfcsr_write(rt2x00dev, 5, rfcsr);
2014
2015 rt2800_rfcsr_read(rt2x00dev, 12, &rfcsr);
2016 if (rf->channel <= 14) {
2017 rt2x00_set_field8(&rfcsr, RFCSR12_DR0, 3);
2018 rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
2019 info->default_power1);
2020 } else {
2021 rt2x00_set_field8(&rfcsr, RFCSR12_DR0, 7);
2022 rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
2023 (info->default_power1 & 0x3) |
2024 ((info->default_power1 & 0xC) << 1));
2025 }
2026 rt2800_rfcsr_write(rt2x00dev, 12, rfcsr);
2027
2028 rt2800_rfcsr_read(rt2x00dev, 13, &rfcsr);
2029 if (rf->channel <= 14) {
2030 rt2x00_set_field8(&rfcsr, RFCSR13_DR0, 3);
2031 rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER,
2032 info->default_power2);
2033 } else {
2034 rt2x00_set_field8(&rfcsr, RFCSR13_DR0, 7);
2035 rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER,
2036 (info->default_power2 & 0x3) |
2037 ((info->default_power2 & 0xC) << 1));
2038 }
2039 rt2800_rfcsr_write(rt2x00dev, 13, rfcsr);
2040
2041 rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr);
2042 rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0);
2043 rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0);
2044 rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0);
2045 rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0);
2046 rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0);
2047 rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0);
2048 if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) {
2049 if (rf->channel <= 14) {
2050 rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
2051 rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1);
2052 }
2053 rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
2054 rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
2055 } else {
2056 switch (rt2x00dev->default_ant.tx_chain_num) {
2057 case 1:
2058 rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
2059 case 2:
2060 rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
2061 break;
2062 }
2063
2064 switch (rt2x00dev->default_ant.rx_chain_num) {
2065 case 1:
2066 rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
2067 case 2:
2068 rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
2069 break;
2070 }
2071 }
2072 rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
2073
2074 rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr);
2075 rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
2076 rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
2077
2078 if (conf_is_ht40(conf)) {
2079 rt2800_rfcsr_write(rt2x00dev, 24, drv_data->calibration_bw40);
2080 rt2800_rfcsr_write(rt2x00dev, 31, drv_data->calibration_bw40);
2081 } else {
2082 rt2800_rfcsr_write(rt2x00dev, 24, drv_data->calibration_bw20);
2083 rt2800_rfcsr_write(rt2x00dev, 31, drv_data->calibration_bw20);
2084 }
2085
2086 if (rf->channel <= 14) {
2087 rt2800_rfcsr_write(rt2x00dev, 7, 0xd8);
2088 rt2800_rfcsr_write(rt2x00dev, 9, 0xc3);
2089 rt2800_rfcsr_write(rt2x00dev, 10, 0xf1);
2090 rt2800_rfcsr_write(rt2x00dev, 11, 0xb9);
2091 rt2800_rfcsr_write(rt2x00dev, 15, 0x53);
2092 rfcsr = 0x4c;
2093 rt2x00_set_field8(&rfcsr, RFCSR16_TXMIXER_GAIN,
2094 drv_data->txmixer_gain_24g);
2095 rt2800_rfcsr_write(rt2x00dev, 16, rfcsr);
2096 rt2800_rfcsr_write(rt2x00dev, 17, 0x23);
2097 rt2800_rfcsr_write(rt2x00dev, 19, 0x93);
2098 rt2800_rfcsr_write(rt2x00dev, 20, 0xb3);
2099 rt2800_rfcsr_write(rt2x00dev, 25, 0x15);
2100 rt2800_rfcsr_write(rt2x00dev, 26, 0x85);
2101 rt2800_rfcsr_write(rt2x00dev, 27, 0x00);
2102 rt2800_rfcsr_write(rt2x00dev, 29, 0x9b);
2103 } else {
2104 rt2800_rfcsr_read(rt2x00dev, 7, &rfcsr);
2105 rt2x00_set_field8(&rfcsr, RFCSR7_BIT2, 1);
2106 rt2x00_set_field8(&rfcsr, RFCSR7_BIT3, 0);
2107 rt2x00_set_field8(&rfcsr, RFCSR7_BIT4, 1);
2108 rt2x00_set_field8(&rfcsr, RFCSR7_BITS67, 0);
2109 rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
2110 rt2800_rfcsr_write(rt2x00dev, 9, 0xc0);
2111 rt2800_rfcsr_write(rt2x00dev, 10, 0xf1);
2112 rt2800_rfcsr_write(rt2x00dev, 11, 0x00);
2113 rt2800_rfcsr_write(rt2x00dev, 15, 0x43);
2114 rfcsr = 0x7a;
2115 rt2x00_set_field8(&rfcsr, RFCSR16_TXMIXER_GAIN,
2116 drv_data->txmixer_gain_5g);
2117 rt2800_rfcsr_write(rt2x00dev, 16, rfcsr);
2118 rt2800_rfcsr_write(rt2x00dev, 17, 0x23);
2119 if (rf->channel <= 64) {
2120 rt2800_rfcsr_write(rt2x00dev, 19, 0xb7);
2121 rt2800_rfcsr_write(rt2x00dev, 20, 0xf6);
2122 rt2800_rfcsr_write(rt2x00dev, 25, 0x3d);
2123 } else if (rf->channel <= 128) {
2124 rt2800_rfcsr_write(rt2x00dev, 19, 0x74);
2125 rt2800_rfcsr_write(rt2x00dev, 20, 0xf4);
2126 rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
2127 } else {
2128 rt2800_rfcsr_write(rt2x00dev, 19, 0x72);
2129 rt2800_rfcsr_write(rt2x00dev, 20, 0xf3);
2130 rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
2131 }
2132 rt2800_rfcsr_write(rt2x00dev, 26, 0x87);
2133 rt2800_rfcsr_write(rt2x00dev, 27, 0x01);
2134 rt2800_rfcsr_write(rt2x00dev, 29, 0x9f);
2135 }
2136
2137 rt2800_register_read(rt2x00dev, GPIO_CTRL, &reg);
2138 rt2x00_set_field32(&reg, GPIO_CTRL_DIR7, 0);
2139 if (rf->channel <= 14)
2140 rt2x00_set_field32(&reg, GPIO_CTRL_VAL7, 1);
2141 else
2142 rt2x00_set_field32(&reg, GPIO_CTRL_VAL7, 0);
2143 rt2800_register_write(rt2x00dev, GPIO_CTRL, reg);
2144
2145 rt2800_rfcsr_read(rt2x00dev, 7, &rfcsr);
2146 rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
2147 rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
2148 }
2149
2150 #define POWER_BOUND 0x27
2151 #define POWER_BOUND_5G 0x2b
2152 #define FREQ_OFFSET_BOUND 0x5f
2153
2154 static void rt2800_adjust_freq_offset(struct rt2x00_dev *rt2x00dev)
2155 {
2156 u8 rfcsr;
2157
2158 rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr);
2159 if (rt2x00dev->freq_offset > FREQ_OFFSET_BOUND)
2160 rt2x00_set_field8(&rfcsr, RFCSR17_CODE, FREQ_OFFSET_BOUND);
2161 else
2162 rt2x00_set_field8(&rfcsr, RFCSR17_CODE, rt2x00dev->freq_offset);
2163 rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
2164 }
2165
2166 static void rt2800_config_channel_rf3290(struct rt2x00_dev *rt2x00dev,
2167 struct ieee80211_conf *conf,
2168 struct rf_channel *rf,
2169 struct channel_info *info)
2170 {
2171 u8 rfcsr;
2172
2173 rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1);
2174 rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3);
2175 rt2800_rfcsr_read(rt2x00dev, 11, &rfcsr);
2176 rt2x00_set_field8(&rfcsr, RFCSR11_R, rf->rf2);
2177 rt2800_rfcsr_write(rt2x00dev, 11, rfcsr);
2178
2179 rt2800_rfcsr_read(rt2x00dev, 49, &rfcsr);
2180 if (info->default_power1 > POWER_BOUND)
2181 rt2x00_set_field8(&rfcsr, RFCSR49_TX, POWER_BOUND);
2182 else
2183 rt2x00_set_field8(&rfcsr, RFCSR49_TX, info->default_power1);
2184 rt2800_rfcsr_write(rt2x00dev, 49, rfcsr);
2185
2186 rt2800_adjust_freq_offset(rt2x00dev);
2187
2188 if (rf->channel <= 14) {
2189 if (rf->channel == 6)
2190 rt2800_bbp_write(rt2x00dev, 68, 0x0c);
2191 else
2192 rt2800_bbp_write(rt2x00dev, 68, 0x0b);
2193
2194 if (rf->channel >= 1 && rf->channel <= 6)
2195 rt2800_bbp_write(rt2x00dev, 59, 0x0f);
2196 else if (rf->channel >= 7 && rf->channel <= 11)
2197 rt2800_bbp_write(rt2x00dev, 59, 0x0e);
2198 else if (rf->channel >= 12 && rf->channel <= 14)
2199 rt2800_bbp_write(rt2x00dev, 59, 0x0d);
2200 }
2201 }
2202
2203 static void rt2800_config_channel_rf3322(struct rt2x00_dev *rt2x00dev,
2204 struct ieee80211_conf *conf,
2205 struct rf_channel *rf,
2206 struct channel_info *info)
2207 {
2208 u8 rfcsr;
2209
2210 rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1);
2211 rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3);
2212
2213 rt2800_rfcsr_write(rt2x00dev, 11, 0x42);
2214 rt2800_rfcsr_write(rt2x00dev, 12, 0x1c);
2215 rt2800_rfcsr_write(rt2x00dev, 13, 0x00);
2216
2217 if (info->default_power1 > POWER_BOUND)
2218 rt2800_rfcsr_write(rt2x00dev, 47, POWER_BOUND);
2219 else
2220 rt2800_rfcsr_write(rt2x00dev, 47, info->default_power1);
2221
2222 if (info->default_power2 > POWER_BOUND)
2223 rt2800_rfcsr_write(rt2x00dev, 48, POWER_BOUND);
2224 else
2225 rt2800_rfcsr_write(rt2x00dev, 48, info->default_power2);
2226
2227 rt2800_adjust_freq_offset(rt2x00dev);
2228
2229 rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr);
2230 rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
2231 rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1);
2232
2233 if ( rt2x00dev->default_ant.tx_chain_num == 2 )
2234 rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
2235 else
2236 rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 0);
2237
2238 if ( rt2x00dev->default_ant.rx_chain_num == 2 )
2239 rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
2240 else
2241 rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0);
2242
2243 rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0);
2244 rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0);
2245
2246 rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
2247
2248 rt2800_rfcsr_write(rt2x00dev, 31, 80);
2249 }
2250
2251 static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev,
2252 struct ieee80211_conf *conf,
2253 struct rf_channel *rf,
2254 struct channel_info *info)
2255 {
2256 u8 rfcsr;
2257
2258 rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1);
2259 rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3);
2260 rt2800_rfcsr_read(rt2x00dev, 11, &rfcsr);
2261 rt2x00_set_field8(&rfcsr, RFCSR11_R, rf->rf2);
2262 rt2800_rfcsr_write(rt2x00dev, 11, rfcsr);
2263
2264 rt2800_rfcsr_read(rt2x00dev, 49, &rfcsr);
2265 if (info->default_power1 > POWER_BOUND)
2266 rt2x00_set_field8(&rfcsr, RFCSR49_TX, POWER_BOUND);
2267 else
2268 rt2x00_set_field8(&rfcsr, RFCSR49_TX, info->default_power1);
2269 rt2800_rfcsr_write(rt2x00dev, 49, rfcsr);
2270
2271 if (rt2x00_rt(rt2x00dev, RT5392)) {
2272 rt2800_rfcsr_read(rt2x00dev, 50, &rfcsr);
2273 if (info->default_power1 > POWER_BOUND)
2274 rt2x00_set_field8(&rfcsr, RFCSR50_TX, POWER_BOUND);
2275 else
2276 rt2x00_set_field8(&rfcsr, RFCSR50_TX,
2277 info->default_power2);
2278 rt2800_rfcsr_write(rt2x00dev, 50, rfcsr);
2279 }
2280
2281 rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr);
2282 if (rt2x00_rt(rt2x00dev, RT5392)) {
2283 rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
2284 rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
2285 }
2286 rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
2287 rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1);
2288 rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
2289 rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1);
2290 rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
2291
2292 rt2800_adjust_freq_offset(rt2x00dev);
2293
2294 if (rf->channel <= 14) {
2295 int idx = rf->channel-1;
2296
2297 if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) {
2298 if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) {
2299 /* r55/r59 value array of channel 1~14 */
2300 static const char r55_bt_rev[] = {0x83, 0x83,
2301 0x83, 0x73, 0x73, 0x63, 0x53, 0x53,
2302 0x53, 0x43, 0x43, 0x43, 0x43, 0x43};
2303 static const char r59_bt_rev[] = {0x0e, 0x0e,
2304 0x0e, 0x0e, 0x0e, 0x0b, 0x0a, 0x09,
2305 0x07, 0x07, 0x07, 0x07, 0x07, 0x07};
2306
2307 rt2800_rfcsr_write(rt2x00dev, 55,
2308 r55_bt_rev[idx]);
2309 rt2800_rfcsr_write(rt2x00dev, 59,
2310 r59_bt_rev[idx]);
2311 } else {
2312 static const char r59_bt[] = {0x8b, 0x8b, 0x8b,
2313 0x8b, 0x8b, 0x8b, 0x8b, 0x8a, 0x89,
2314 0x88, 0x88, 0x86, 0x85, 0x84};
2315
2316 rt2800_rfcsr_write(rt2x00dev, 59, r59_bt[idx]);
2317 }
2318 } else {
2319 if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) {
2320 static const char r55_nonbt_rev[] = {0x23, 0x23,
2321 0x23, 0x23, 0x13, 0x13, 0x03, 0x03,
2322 0x03, 0x03, 0x03, 0x03, 0x03, 0x03};
2323 static const char r59_nonbt_rev[] = {0x07, 0x07,
2324 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
2325 0x07, 0x07, 0x06, 0x05, 0x04, 0x04};
2326
2327 rt2800_rfcsr_write(rt2x00dev, 55,
2328 r55_nonbt_rev[idx]);
2329 rt2800_rfcsr_write(rt2x00dev, 59,
2330 r59_nonbt_rev[idx]);
2331 } else if (rt2x00_rt(rt2x00dev, RT5390) ||
2332 rt2x00_rt(rt2x00dev, RT5392)) {
2333 static const char r59_non_bt[] = {0x8f, 0x8f,
2334 0x8f, 0x8f, 0x8f, 0x8f, 0x8f, 0x8d,
2335 0x8a, 0x88, 0x88, 0x87, 0x87, 0x86};
2336
2337 rt2800_rfcsr_write(rt2x00dev, 59,
2338 r59_non_bt[idx]);
2339 }
2340 }
2341 }
2342 }
2343
2344 static void rt2800_config_channel_rf55xx(struct rt2x00_dev *rt2x00dev,
2345 struct ieee80211_conf *conf,
2346 struct rf_channel *rf,
2347 struct channel_info *info)
2348 {
2349 u8 rfcsr, ep_reg;
2350 u32 reg;
2351 int power_bound;
2352
2353 /* TODO */
2354 const bool is_11b = false;
2355 const bool is_type_ep = false;
2356
2357 rt2800_register_read(rt2x00dev, LDO_CFG0, &reg);
2358 rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL,
2359 (rf->channel > 14 || conf_is_ht40(conf)) ? 5 : 0);
2360 rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
2361
2362 /* Order of values on rf_channel entry: N, K, mod, R */
2363 rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1 & 0xff);
2364
2365 rt2800_rfcsr_read(rt2x00dev, 9, &rfcsr);
2366 rt2x00_set_field8(&rfcsr, RFCSR9_K, rf->rf2 & 0xf);
2367 rt2x00_set_field8(&rfcsr, RFCSR9_N, (rf->rf1 & 0x100) >> 8);
2368 rt2x00_set_field8(&rfcsr, RFCSR9_MOD, ((rf->rf3 - 8) & 0x4) >> 2);
2369 rt2800_rfcsr_write(rt2x00dev, 9, rfcsr);
2370
2371 rt2800_rfcsr_read(rt2x00dev, 11, &rfcsr);
2372 rt2x00_set_field8(&rfcsr, RFCSR11_R, rf->rf4 - 1);
2373 rt2x00_set_field8(&rfcsr, RFCSR11_MOD, (rf->rf3 - 8) & 0x3);
2374 rt2800_rfcsr_write(rt2x00dev, 11, rfcsr);
2375
2376 if (rf->channel <= 14) {
2377 rt2800_rfcsr_write(rt2x00dev, 10, 0x90);
2378 /* FIXME: RF11 owerwrite ? */
2379 rt2800_rfcsr_write(rt2x00dev, 11, 0x4A);
2380 rt2800_rfcsr_write(rt2x00dev, 12, 0x52);
2381 rt2800_rfcsr_write(rt2x00dev, 13, 0x42);
2382 rt2800_rfcsr_write(rt2x00dev, 22, 0x40);
2383 rt2800_rfcsr_write(rt2x00dev, 24, 0x4A);
2384 rt2800_rfcsr_write(rt2x00dev, 25, 0x80);
2385 rt2800_rfcsr_write(rt2x00dev, 27, 0x42);
2386 rt2800_rfcsr_write(rt2x00dev, 36, 0x80);
2387 rt2800_rfcsr_write(rt2x00dev, 37, 0x08);
2388 rt2800_rfcsr_write(rt2x00dev, 38, 0x89);
2389 rt2800_rfcsr_write(rt2x00dev, 39, 0x1B);
2390 rt2800_rfcsr_write(rt2x00dev, 40, 0x0D);
2391 rt2800_rfcsr_write(rt2x00dev, 41, 0x9B);
2392 rt2800_rfcsr_write(rt2x00dev, 42, 0xD5);
2393 rt2800_rfcsr_write(rt2x00dev, 43, 0x72);
2394 rt2800_rfcsr_write(rt2x00dev, 44, 0x0E);
2395 rt2800_rfcsr_write(rt2x00dev, 45, 0xA2);
2396 rt2800_rfcsr_write(rt2x00dev, 46, 0x6B);
2397 rt2800_rfcsr_write(rt2x00dev, 48, 0x10);
2398 rt2800_rfcsr_write(rt2x00dev, 51, 0x3E);
2399 rt2800_rfcsr_write(rt2x00dev, 52, 0x48);
2400 rt2800_rfcsr_write(rt2x00dev, 54, 0x38);
2401 rt2800_rfcsr_write(rt2x00dev, 56, 0xA1);
2402 rt2800_rfcsr_write(rt2x00dev, 57, 0x00);
2403 rt2800_rfcsr_write(rt2x00dev, 58, 0x39);
2404 rt2800_rfcsr_write(rt2x00dev, 60, 0x45);
2405 rt2800_rfcsr_write(rt2x00dev, 61, 0x91);
2406 rt2800_rfcsr_write(rt2x00dev, 62, 0x39);
2407
2408 /* TODO RF27 <- tssi */
2409
2410 rfcsr = rf->channel <= 10 ? 0x07 : 0x06;
2411 rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
2412 rt2800_rfcsr_write(rt2x00dev, 59, rfcsr);
2413
2414 if (is_11b) {
2415 /* CCK */
2416 rt2800_rfcsr_write(rt2x00dev, 31, 0xF8);
2417 rt2800_rfcsr_write(rt2x00dev, 32, 0xC0);
2418 if (is_type_ep)
2419 rt2800_rfcsr_write(rt2x00dev, 55, 0x06);
2420 else
2421 rt2800_rfcsr_write(rt2x00dev, 55, 0x47);
2422 } else {
2423 /* OFDM */
2424 if (is_type_ep)
2425 rt2800_rfcsr_write(rt2x00dev, 55, 0x03);
2426 else
2427 rt2800_rfcsr_write(rt2x00dev, 55, 0x43);
2428 }
2429
2430 power_bound = POWER_BOUND;
2431 ep_reg = 0x2;
2432 } else {
2433 rt2800_rfcsr_write(rt2x00dev, 10, 0x97);
2434 /* FIMXE: RF11 overwrite */
2435 rt2800_rfcsr_write(rt2x00dev, 11, 0x40);
2436 rt2800_rfcsr_write(rt2x00dev, 25, 0xBF);
2437 rt2800_rfcsr_write(rt2x00dev, 27, 0x42);
2438 rt2800_rfcsr_write(rt2x00dev, 36, 0x00);
2439 rt2800_rfcsr_write(rt2x00dev, 37, 0x04);
2440 rt2800_rfcsr_write(rt2x00dev, 38, 0x85);
2441 rt2800_rfcsr_write(rt2x00dev, 40, 0x42);
2442 rt2800_rfcsr_write(rt2x00dev, 41, 0xBB);
2443 rt2800_rfcsr_write(rt2x00dev, 42, 0xD7);
2444 rt2800_rfcsr_write(rt2x00dev, 45, 0x41);
2445 rt2800_rfcsr_write(rt2x00dev, 48, 0x00);
2446 rt2800_rfcsr_write(rt2x00dev, 57, 0x77);
2447 rt2800_rfcsr_write(rt2x00dev, 60, 0x05);
2448 rt2800_rfcsr_write(rt2x00dev, 61, 0x01);
2449
2450 /* TODO RF27 <- tssi */
2451
2452 if (rf->channel >= 36 && rf->channel <= 64) {
2453
2454 rt2800_rfcsr_write(rt2x00dev, 12, 0x2E);
2455 rt2800_rfcsr_write(rt2x00dev, 13, 0x22);
2456 rt2800_rfcsr_write(rt2x00dev, 22, 0x60);
2457 rt2800_rfcsr_write(rt2x00dev, 23, 0x7F);
2458 if (rf->channel <= 50)
2459 rt2800_rfcsr_write(rt2x00dev, 24, 0x09);
2460 else if (rf->channel >= 52)
2461 rt2800_rfcsr_write(rt2x00dev, 24, 0x07);
2462 rt2800_rfcsr_write(rt2x00dev, 39, 0x1C);
2463 rt2800_rfcsr_write(rt2x00dev, 43, 0x5B);
2464 rt2800_rfcsr_write(rt2x00dev, 44, 0X40);
2465 rt2800_rfcsr_write(rt2x00dev, 46, 0X00);
2466 rt2800_rfcsr_write(rt2x00dev, 51, 0xFE);
2467 rt2800_rfcsr_write(rt2x00dev, 52, 0x0C);
2468 rt2800_rfcsr_write(rt2x00dev, 54, 0xF8);
2469 if (rf->channel <= 50) {
2470 rt2800_rfcsr_write(rt2x00dev, 55, 0x06),
2471 rt2800_rfcsr_write(rt2x00dev, 56, 0xD3);
2472 } else if (rf->channel >= 52) {
2473 rt2800_rfcsr_write(rt2x00dev, 55, 0x04);
2474 rt2800_rfcsr_write(rt2x00dev, 56, 0xBB);
2475 }
2476
2477 rt2800_rfcsr_write(rt2x00dev, 58, 0x15);
2478 rt2800_rfcsr_write(rt2x00dev, 59, 0x7F);
2479 rt2800_rfcsr_write(rt2x00dev, 62, 0x15);
2480
2481 } else if (rf->channel >= 100 && rf->channel <= 165) {
2482
2483 rt2800_rfcsr_write(rt2x00dev, 12, 0x0E);
2484 rt2800_rfcsr_write(rt2x00dev, 13, 0x42);
2485 rt2800_rfcsr_write(rt2x00dev, 22, 0x40);
2486 if (rf->channel <= 153) {
2487 rt2800_rfcsr_write(rt2x00dev, 23, 0x3C);
2488 rt2800_rfcsr_write(rt2x00dev, 24, 0x06);
2489 } else if (rf->channel >= 155) {
2490 rt2800_rfcsr_write(rt2x00dev, 23, 0x38);
2491 rt2800_rfcsr_write(rt2x00dev, 24, 0x05);
2492 }
2493 if (rf->channel <= 138) {
2494 rt2800_rfcsr_write(rt2x00dev, 39, 0x1A);
2495 rt2800_rfcsr_write(rt2x00dev, 43, 0x3B);
2496 rt2800_rfcsr_write(rt2x00dev, 44, 0x20);
2497 rt2800_rfcsr_write(rt2x00dev, 46, 0x18);
2498 } else if (rf->channel >= 140) {
2499 rt2800_rfcsr_write(rt2x00dev, 39, 0x18);
2500 rt2800_rfcsr_write(rt2x00dev, 43, 0x1B);
2501 rt2800_rfcsr_write(rt2x00dev, 44, 0x10);
2502 rt2800_rfcsr_write(rt2x00dev, 46, 0X08);
2503 }
2504 if (rf->channel <= 124)
2505 rt2800_rfcsr_write(rt2x00dev, 51, 0xFC);
2506 else if (rf->channel >= 126)
2507 rt2800_rfcsr_write(rt2x00dev, 51, 0xEC);
2508 if (rf->channel <= 138)
2509 rt2800_rfcsr_write(rt2x00dev, 52, 0x06);
2510 else if (rf->channel >= 140)
2511 rt2800_rfcsr_write(rt2x00dev, 52, 0x06);
2512 rt2800_rfcsr_write(rt2x00dev, 54, 0xEB);
2513 if (rf->channel <= 138)
2514 rt2800_rfcsr_write(rt2x00dev, 55, 0x01);
2515 else if (rf->channel >= 140)
2516 rt2800_rfcsr_write(rt2x00dev, 55, 0x00);
2517 if (rf->channel <= 128)
2518 rt2800_rfcsr_write(rt2x00dev, 56, 0xBB);
2519 else if (rf->channel >= 130)
2520 rt2800_rfcsr_write(rt2x00dev, 56, 0xAB);
2521 if (rf->channel <= 116)
2522 rt2800_rfcsr_write(rt2x00dev, 58, 0x1D);
2523 else if (rf->channel >= 118)
2524 rt2800_rfcsr_write(rt2x00dev, 58, 0x15);
2525 if (rf->channel <= 138)
2526 rt2800_rfcsr_write(rt2x00dev, 59, 0x3F);
2527 else if (rf->channel >= 140)
2528 rt2800_rfcsr_write(rt2x00dev, 59, 0x7C);
2529 if (rf->channel <= 116)
2530 rt2800_rfcsr_write(rt2x00dev, 62, 0x1D);
2531 else if (rf->channel >= 118)
2532 rt2800_rfcsr_write(rt2x00dev, 62, 0x15);
2533 }
2534
2535 power_bound = POWER_BOUND_5G;
2536 ep_reg = 0x3;
2537 }
2538
2539 rt2800_rfcsr_read(rt2x00dev, 49, &rfcsr);
2540 if (info->default_power1 > power_bound)
2541 rt2x00_set_field8(&rfcsr, RFCSR49_TX, power_bound);
2542 else
2543 rt2x00_set_field8(&rfcsr, RFCSR49_TX, info->default_power1);
2544 if (is_type_ep)
2545 rt2x00_set_field8(&rfcsr, RFCSR49_EP, ep_reg);
2546 rt2800_rfcsr_write(rt2x00dev, 49, rfcsr);
2547
2548 rt2800_rfcsr_read(rt2x00dev, 50, &rfcsr);
2549 if (info->default_power2 > power_bound)
2550 rt2x00_set_field8(&rfcsr, RFCSR50_TX, power_bound);
2551 else
2552 rt2x00_set_field8(&rfcsr, RFCSR50_TX, info->default_power2);
2553 if (is_type_ep)
2554 rt2x00_set_field8(&rfcsr, RFCSR50_EP, ep_reg);
2555 rt2800_rfcsr_write(rt2x00dev, 50, rfcsr);
2556
2557 rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr);
2558 rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
2559 rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1);
2560
2561 rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD,
2562 rt2x00dev->default_ant.tx_chain_num >= 1);
2563 rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD,
2564 rt2x00dev->default_ant.tx_chain_num == 2);
2565 rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0);
2566
2567 rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD,
2568 rt2x00dev->default_ant.rx_chain_num >= 1);
2569 rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD,
2570 rt2x00dev->default_ant.rx_chain_num == 2);
2571 rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0);
2572
2573 rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
2574 rt2800_rfcsr_write(rt2x00dev, 6, 0xe4);
2575
2576 if (conf_is_ht40(conf))
2577 rt2800_rfcsr_write(rt2x00dev, 30, 0x16);
2578 else
2579 rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
2580
2581 if (!is_11b) {
2582 rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
2583 rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
2584 }
2585
2586 /* TODO proper frequency adjustment */
2587 rt2800_adjust_freq_offset(rt2x00dev);
2588
2589 /* TODO merge with others */
2590 rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr);
2591 rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1);
2592 rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
2593
2594 /* BBP settings */
2595 rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
2596 rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
2597 rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
2598
2599 rt2800_bbp_write(rt2x00dev, 79, (rf->channel <= 14) ? 0x1C : 0x18);
2600 rt2800_bbp_write(rt2x00dev, 80, (rf->channel <= 14) ? 0x0E : 0x08);
2601 rt2800_bbp_write(rt2x00dev, 81, (rf->channel <= 14) ? 0x3A : 0x38);
2602 rt2800_bbp_write(rt2x00dev, 82, (rf->channel <= 14) ? 0x62 : 0x92);
2603
2604 /* GLRT band configuration */
2605 rt2800_bbp_write(rt2x00dev, 195, 128);
2606 rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0xE0 : 0xF0);
2607 rt2800_bbp_write(rt2x00dev, 195, 129);
2608 rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x1F : 0x1E);
2609 rt2800_bbp_write(rt2x00dev, 195, 130);
2610 rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x38 : 0x28);
2611 rt2800_bbp_write(rt2x00dev, 195, 131);
2612 rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x32 : 0x20);
2613 rt2800_bbp_write(rt2x00dev, 195, 133);
2614 rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x28 : 0x7F);
2615 rt2800_bbp_write(rt2x00dev, 195, 124);
2616 rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x19 : 0x7F);
2617 }
2618
2619 static void rt2800_bbp_write_with_rx_chain(struct rt2x00_dev *rt2x00dev,
2620 const unsigned int word,
2621 const u8 value)
2622 {
2623 u8 chain, reg;
2624
2625 for (chain = 0; chain < rt2x00dev->default_ant.rx_chain_num; chain++) {
2626 rt2800_bbp_read(rt2x00dev, 27, &reg);
2627 rt2x00_set_field8(&reg, BBP27_RX_CHAIN_SEL, chain);
2628 rt2800_bbp_write(rt2x00dev, 27, reg);
2629
2630 rt2800_bbp_write(rt2x00dev, word, value);
2631 }
2632 }
2633
2634 static void rt2800_iq_calibrate(struct rt2x00_dev *rt2x00dev, int channel)
2635 {
2636 u8 cal;
2637
2638 /* TX0 IQ Gain */
2639 rt2800_bbp_write(rt2x00dev, 158, 0x2c);
2640 if (channel <= 14)
2641 cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_GAIN_CAL_TX0_2G);
2642 else if (channel >= 36 && channel <= 64)
2643 cal = rt2x00_eeprom_byte(rt2x00dev,
2644 EEPROM_IQ_GAIN_CAL_TX0_CH36_TO_CH64_5G);
2645 else if (channel >= 100 && channel <= 138)
2646 cal = rt2x00_eeprom_byte(rt2x00dev,
2647 EEPROM_IQ_GAIN_CAL_TX0_CH100_TO_CH138_5G);
2648 else if (channel >= 140 && channel <= 165)
2649 cal = rt2x00_eeprom_byte(rt2x00dev,
2650 EEPROM_IQ_GAIN_CAL_TX0_CH140_TO_CH165_5G);
2651 else
2652 cal = 0;
2653 rt2800_bbp_write(rt2x00dev, 159, cal);
2654
2655 /* TX0 IQ Phase */
2656 rt2800_bbp_write(rt2x00dev, 158, 0x2d);
2657 if (channel <= 14)
2658 cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_PHASE_CAL_TX0_2G);
2659 else if (channel >= 36 && channel <= 64)
2660 cal = rt2x00_eeprom_byte(rt2x00dev,
2661 EEPROM_IQ_PHASE_CAL_TX0_CH36_TO_CH64_5G);
2662 else if (channel >= 100 && channel <= 138)
2663 cal = rt2x00_eeprom_byte(rt2x00dev,
2664 EEPROM_IQ_PHASE_CAL_TX0_CH100_TO_CH138_5G);
2665 else if (channel >= 140 && channel <= 165)
2666 cal = rt2x00_eeprom_byte(rt2x00dev,
2667 EEPROM_IQ_PHASE_CAL_TX0_CH140_TO_CH165_5G);
2668 else
2669 cal = 0;
2670 rt2800_bbp_write(rt2x00dev, 159, cal);
2671
2672 /* TX1 IQ Gain */
2673 rt2800_bbp_write(rt2x00dev, 158, 0x4a);
2674 if (channel <= 14)
2675 cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_GAIN_CAL_TX1_2G);
2676 else if (channel >= 36 && channel <= 64)
2677 cal = rt2x00_eeprom_byte(rt2x00dev,
2678 EEPROM_IQ_GAIN_CAL_TX1_CH36_TO_CH64_5G);
2679 else if (channel >= 100 && channel <= 138)
2680 cal = rt2x00_eeprom_byte(rt2x00dev,
2681 EEPROM_IQ_GAIN_CAL_TX1_CH100_TO_CH138_5G);
2682 else if (channel >= 140 && channel <= 165)
2683 cal = rt2x00_eeprom_byte(rt2x00dev,
2684 EEPROM_IQ_GAIN_CAL_TX1_CH140_TO_CH165_5G);
2685 else
2686 cal = 0;
2687 rt2800_bbp_write(rt2x00dev, 159, cal);
2688
2689 /* TX1 IQ Phase */
2690 rt2800_bbp_write(rt2x00dev, 158, 0x4b);
2691 if (channel <= 14)
2692 cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_PHASE_CAL_TX1_2G);
2693 else if (channel >= 36 && channel <= 64)
2694 cal = rt2x00_eeprom_byte(rt2x00dev,
2695 EEPROM_IQ_PHASE_CAL_TX1_CH36_TO_CH64_5G);
2696 else if (channel >= 100 && channel <= 138)
2697 cal = rt2x00_eeprom_byte(rt2x00dev,
2698 EEPROM_IQ_PHASE_CAL_TX1_CH100_TO_CH138_5G);
2699 else if (channel >= 140 && channel <= 165)
2700 cal = rt2x00_eeprom_byte(rt2x00dev,
2701 EEPROM_IQ_PHASE_CAL_TX1_CH140_TO_CH165_5G);
2702 else
2703 cal = 0;
2704 rt2800_bbp_write(rt2x00dev, 159, cal);
2705
2706 /* FIXME: possible RX0, RX1 callibration ? */
2707
2708 /* RF IQ compensation control */
2709 rt2800_bbp_write(rt2x00dev, 158, 0x04);
2710 cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_RF_IQ_COMPENSATION_CONTROL);
2711 rt2800_bbp_write(rt2x00dev, 159, cal != 0xff ? cal : 0);
2712
2713 /* RF IQ imbalance compensation control */
2714 rt2800_bbp_write(rt2x00dev, 158, 0x03);
2715 cal = rt2x00_eeprom_byte(rt2x00dev,
2716 EEPROM_RF_IQ_IMBALANCE_COMPENSATION_CONTROL);
2717 rt2800_bbp_write(rt2x00dev, 159, cal != 0xff ? cal : 0);
2718 }
2719
2720 static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
2721 struct ieee80211_conf *conf,
2722 struct rf_channel *rf,
2723 struct channel_info *info)
2724 {
2725 u32 reg;
2726 unsigned int tx_pin;
2727 u8 bbp, rfcsr;
2728
2729 if (rf->channel <= 14) {
2730 info->default_power1 = TXPOWER_G_TO_DEV(info->default_power1);
2731 info->default_power2 = TXPOWER_G_TO_DEV(info->default_power2);
2732 } else {
2733 info->default_power1 = TXPOWER_A_TO_DEV(info->default_power1);
2734 info->default_power2 = TXPOWER_A_TO_DEV(info->default_power2);
2735 }
2736
2737 switch (rt2x00dev->chip.rf) {
2738 case RF2020:
2739 case RF3020:
2740 case RF3021:
2741 case RF3022:
2742 case RF3320:
2743 rt2800_config_channel_rf3xxx(rt2x00dev, conf, rf, info);
2744 break;
2745 case RF3052:
2746 rt2800_config_channel_rf3052(rt2x00dev, conf, rf, info);
2747 break;
2748 case RF3290:
2749 rt2800_config_channel_rf3290(rt2x00dev, conf, rf, info);
2750 break;
2751 case RF3322:
2752 rt2800_config_channel_rf3322(rt2x00dev, conf, rf, info);
2753 break;
2754 case RF5360:
2755 case RF5370:
2756 case RF5372:
2757 case RF5390:
2758 case RF5392:
2759 rt2800_config_channel_rf53xx(rt2x00dev, conf, rf, info);
2760 break;
2761 case RF5592:
2762 rt2800_config_channel_rf55xx(rt2x00dev, conf, rf, info);
2763 break;
2764 default:
2765 rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info);
2766 }
2767
2768 if (rt2x00_rf(rt2x00dev, RF3290) ||
2769 rt2x00_rf(rt2x00dev, RF3322) ||
2770 rt2x00_rf(rt2x00dev, RF5360) ||
2771 rt2x00_rf(rt2x00dev, RF5370) ||
2772 rt2x00_rf(rt2x00dev, RF5372) ||
2773 rt2x00_rf(rt2x00dev, RF5390) ||
2774 rt2x00_rf(rt2x00dev, RF5392)) {
2775 rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
2776 rt2x00_set_field8(&rfcsr, RFCSR30_TX_H20M, 0);
2777 rt2x00_set_field8(&rfcsr, RFCSR30_RX_H20M, 0);
2778 rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
2779
2780 rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr);
2781 rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1);
2782 rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
2783 }
2784
2785 /*
2786 * Change BBP settings
2787 */
2788 if (rt2x00_rt(rt2x00dev, RT3352)) {
2789 rt2800_bbp_write(rt2x00dev, 27, 0x0);
2790 rt2800_bbp_write(rt2x00dev, 66, 0x26 + rt2x00dev->lna_gain);
2791 rt2800_bbp_write(rt2x00dev, 27, 0x20);
2792 rt2800_bbp_write(rt2x00dev, 66, 0x26 + rt2x00dev->lna_gain);
2793 } else {
2794 rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
2795 rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
2796 rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
2797 rt2800_bbp_write(rt2x00dev, 86, 0);
2798 }
2799
2800 if (rf->channel <= 14) {
2801 if (!rt2x00_rt(rt2x00dev, RT5390) &&
2802 !rt2x00_rt(rt2x00dev, RT5392)) {
2803 if (test_bit(CAPABILITY_EXTERNAL_LNA_BG,
2804 &rt2x00dev->cap_flags)) {
2805 rt2800_bbp_write(rt2x00dev, 82, 0x62);
2806 rt2800_bbp_write(rt2x00dev, 75, 0x46);
2807 } else {
2808 rt2800_bbp_write(rt2x00dev, 82, 0x84);
2809 rt2800_bbp_write(rt2x00dev, 75, 0x50);
2810 }
2811 }
2812 } else {
2813 if (rt2x00_rt(rt2x00dev, RT3572))
2814 rt2800_bbp_write(rt2x00dev, 82, 0x94);
2815 else
2816 rt2800_bbp_write(rt2x00dev, 82, 0xf2);
2817
2818 if (test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags))
2819 rt2800_bbp_write(rt2x00dev, 75, 0x46);
2820 else
2821 rt2800_bbp_write(rt2x00dev, 75, 0x50);
2822 }
2823
2824 rt2800_register_read(rt2x00dev, TX_BAND_CFG, &reg);
2825 rt2x00_set_field32(&reg, TX_BAND_CFG_HT40_MINUS, conf_is_ht40_minus(conf));
2826 rt2x00_set_field32(&reg, TX_BAND_CFG_A, rf->channel > 14);
2827 rt2x00_set_field32(&reg, TX_BAND_CFG_BG, rf->channel <= 14);
2828 rt2800_register_write(rt2x00dev, TX_BAND_CFG, reg);
2829
2830 if (rt2x00_rt(rt2x00dev, RT3572))
2831 rt2800_rfcsr_write(rt2x00dev, 8, 0);
2832
2833 tx_pin = 0;
2834
2835 switch (rt2x00dev->default_ant.tx_chain_num) {
2836 case 3:
2837 /* Turn on tertiary PAs */
2838 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A2_EN,
2839 rf->channel > 14);
2840 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G2_EN,
2841 rf->channel <= 14);
2842 /* fall-through */
2843 case 2:
2844 /* Turn on secondary PAs */
2845 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN,
2846 rf->channel > 14);
2847 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN,
2848 rf->channel <= 14);
2849 /* fall-through */
2850 case 1:
2851 /* Turn on primary PAs */
2852 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN,
2853 rf->channel > 14);
2854 if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags))
2855 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1);
2856 else
2857 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN,
2858 rf->channel <= 14);
2859 break;
2860 }
2861
2862 switch (rt2x00dev->default_ant.rx_chain_num) {
2863 case 3:
2864 /* Turn on tertiary LNAs */
2865 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A2_EN, 1);
2866 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G2_EN, 1);
2867 /* fall-through */
2868 case 2:
2869 /* Turn on secondary LNAs */
2870 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
2871 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
2872 /* fall-through */
2873 case 1:
2874 /* Turn on primary LNAs */
2875 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
2876 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
2877 break;
2878 }
2879
2880 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
2881 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
2882
2883 rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
2884
2885 if (rt2x00_rt(rt2x00dev, RT3572))
2886 rt2800_rfcsr_write(rt2x00dev, 8, 0x80);
2887
2888 if (rt2x00_rt(rt2x00dev, RT5592)) {
2889 rt2800_bbp_write(rt2x00dev, 195, 141);
2890 rt2800_bbp_write(rt2x00dev, 196, conf_is_ht40(conf) ? 0x10 : 0x1a);
2891
2892 /* AGC init */
2893 reg = (rf->channel <= 14 ? 0x1c : 0x24) + 2 * rt2x00dev->lna_gain;
2894 rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
2895
2896 rt2800_iq_calibrate(rt2x00dev, rf->channel);
2897 }
2898
2899 rt2800_bbp_read(rt2x00dev, 4, &bbp);
2900 rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
2901 rt2800_bbp_write(rt2x00dev, 4, bbp);
2902
2903 rt2800_bbp_read(rt2x00dev, 3, &bbp);
2904 rt2x00_set_field8(&bbp, BBP3_HT40_MINUS, conf_is_ht40_minus(conf));
2905 rt2800_bbp_write(rt2x00dev, 3, bbp);
2906
2907 if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C)) {
2908 if (conf_is_ht40(conf)) {
2909 rt2800_bbp_write(rt2x00dev, 69, 0x1a);
2910 rt2800_bbp_write(rt2x00dev, 70, 0x0a);
2911 rt2800_bbp_write(rt2x00dev, 73, 0x16);
2912 } else {
2913 rt2800_bbp_write(rt2x00dev, 69, 0x16);
2914 rt2800_bbp_write(rt2x00dev, 70, 0x08);
2915 rt2800_bbp_write(rt2x00dev, 73, 0x11);
2916 }
2917 }
2918
2919 msleep(1);
2920
2921 /*
2922 * Clear channel statistic counters
2923 */
2924 rt2800_register_read(rt2x00dev, CH_IDLE_STA, &reg);
2925 rt2800_register_read(rt2x00dev, CH_BUSY_STA, &reg);
2926 rt2800_register_read(rt2x00dev, CH_BUSY_STA_SEC, &reg);
2927
2928 /*
2929 * Clear update flag
2930 */
2931 if (rt2x00_rt(rt2x00dev, RT3352)) {
2932 rt2800_bbp_read(rt2x00dev, 49, &bbp);
2933 rt2x00_set_field8(&bbp, BBP49_UPDATE_FLAG, 0);
2934 rt2800_bbp_write(rt2x00dev, 49, bbp);
2935 }
2936 }
2937
2938 static int rt2800_get_gain_calibration_delta(struct rt2x00_dev *rt2x00dev)
2939 {
2940 u8 tssi_bounds[9];
2941 u8 current_tssi;
2942 u16 eeprom;
2943 u8 step;
2944 int i;
2945
2946 /*
2947 * Read TSSI boundaries for temperature compensation from
2948 * the EEPROM.
2949 *
2950 * Array idx 0 1 2 3 4 5 6 7 8
2951 * Matching Delta value -4 -3 -2 -1 0 +1 +2 +3 +4
2952 * Example TSSI bounds 0xF0 0xD0 0xB5 0xA0 0x88 0x45 0x25 0x15 0x00
2953 */
2954 if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
2955 rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG1, &eeprom);
2956 tssi_bounds[0] = rt2x00_get_field16(eeprom,
2957 EEPROM_TSSI_BOUND_BG1_MINUS4);
2958 tssi_bounds[1] = rt2x00_get_field16(eeprom,
2959 EEPROM_TSSI_BOUND_BG1_MINUS3);
2960
2961 rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG2, &eeprom);
2962 tssi_bounds[2] = rt2x00_get_field16(eeprom,
2963 EEPROM_TSSI_BOUND_BG2_MINUS2);
2964 tssi_bounds[3] = rt2x00_get_field16(eeprom,
2965 EEPROM_TSSI_BOUND_BG2_MINUS1);
2966
2967 rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG3, &eeprom);
2968 tssi_bounds[4] = rt2x00_get_field16(eeprom,
2969 EEPROM_TSSI_BOUND_BG3_REF);
2970 tssi_bounds[5] = rt2x00_get_field16(eeprom,
2971 EEPROM_TSSI_BOUND_BG3_PLUS1);
2972
2973 rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG4, &eeprom);
2974 tssi_bounds[6] = rt2x00_get_field16(eeprom,
2975 EEPROM_TSSI_BOUND_BG4_PLUS2);
2976 tssi_bounds[7] = rt2x00_get_field16(eeprom,
2977 EEPROM_TSSI_BOUND_BG4_PLUS3);
2978
2979 rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG5, &eeprom);
2980 tssi_bounds[8] = rt2x00_get_field16(eeprom,
2981 EEPROM_TSSI_BOUND_BG5_PLUS4);
2982
2983 step = rt2x00_get_field16(eeprom,
2984 EEPROM_TSSI_BOUND_BG5_AGC_STEP);
2985 } else {
2986 rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A1, &eeprom);
2987 tssi_bounds[0] = rt2x00_get_field16(eeprom,
2988 EEPROM_TSSI_BOUND_A1_MINUS4);
2989 tssi_bounds[1] = rt2x00_get_field16(eeprom,
2990 EEPROM_TSSI_BOUND_A1_MINUS3);
2991
2992 rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A2, &eeprom);
2993 tssi_bounds[2] = rt2x00_get_field16(eeprom,
2994 EEPROM_TSSI_BOUND_A2_MINUS2);
2995 tssi_bounds[3] = rt2x00_get_field16(eeprom,
2996 EEPROM_TSSI_BOUND_A2_MINUS1);
2997
2998 rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A3, &eeprom);
2999 tssi_bounds[4] = rt2x00_get_field16(eeprom,
3000 EEPROM_TSSI_BOUND_A3_REF);
3001 tssi_bounds[5] = rt2x00_get_field16(eeprom,
3002 EEPROM_TSSI_BOUND_A3_PLUS1);
3003
3004 rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A4, &eeprom);
3005 tssi_bounds[6] = rt2x00_get_field16(eeprom,
3006 EEPROM_TSSI_BOUND_A4_PLUS2);
3007 tssi_bounds[7] = rt2x00_get_field16(eeprom,
3008 EEPROM_TSSI_BOUND_A4_PLUS3);
3009
3010 rt2800_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A5, &eeprom);
3011 tssi_bounds[8] = rt2x00_get_field16(eeprom,
3012 EEPROM_TSSI_BOUND_A5_PLUS4);
3013
3014 step = rt2x00_get_field16(eeprom,
3015 EEPROM_TSSI_BOUND_A5_AGC_STEP);
3016 }
3017
3018 /*
3019 * Check if temperature compensation is supported.
3020 */
3021 if (tssi_bounds[4] == 0xff || step == 0xff)
3022 return 0;
3023
3024 /*
3025 * Read current TSSI (BBP 49).
3026 */
3027 rt2800_bbp_read(rt2x00dev, 49, &current_tssi);
3028
3029 /*
3030 * Compare TSSI value (BBP49) with the compensation boundaries
3031 * from the EEPROM and increase or decrease tx power.
3032 */
3033 for (i = 0; i <= 3; i++) {
3034 if (current_tssi > tssi_bounds[i])
3035 break;
3036 }
3037
3038 if (i == 4) {
3039 for (i = 8; i >= 5; i--) {
3040 if (current_tssi < tssi_bounds[i])
3041 break;
3042 }
3043 }
3044
3045 return (i - 4) * step;
3046 }
3047
3048 static int rt2800_get_txpower_bw_comp(struct rt2x00_dev *rt2x00dev,
3049 enum ieee80211_band band)
3050 {
3051 u16 eeprom;
3052 u8 comp_en;
3053 u8 comp_type;
3054 int comp_value = 0;
3055
3056 rt2800_eeprom_read(rt2x00dev, EEPROM_TXPOWER_DELTA, &eeprom);
3057
3058 /*
3059 * HT40 compensation not required.
3060 */
3061 if (eeprom == 0xffff ||
3062 !test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
3063 return 0;
3064
3065 if (band == IEEE80211_BAND_2GHZ) {
3066 comp_en = rt2x00_get_field16(eeprom,
3067 EEPROM_TXPOWER_DELTA_ENABLE_2G);
3068 if (comp_en) {
3069 comp_type = rt2x00_get_field16(eeprom,
3070 EEPROM_TXPOWER_DELTA_TYPE_2G);
3071 comp_value = rt2x00_get_field16(eeprom,
3072 EEPROM_TXPOWER_DELTA_VALUE_2G);
3073 if (!comp_type)
3074 comp_value = -comp_value;
3075 }
3076 } else {
3077 comp_en = rt2x00_get_field16(eeprom,
3078 EEPROM_TXPOWER_DELTA_ENABLE_5G);
3079 if (comp_en) {
3080 comp_type = rt2x00_get_field16(eeprom,
3081 EEPROM_TXPOWER_DELTA_TYPE_5G);
3082 comp_value = rt2x00_get_field16(eeprom,
3083 EEPROM_TXPOWER_DELTA_VALUE_5G);
3084 if (!comp_type)
3085 comp_value = -comp_value;
3086 }
3087 }
3088
3089 return comp_value;
3090 }
3091
3092 static int rt2800_get_txpower_reg_delta(struct rt2x00_dev *rt2x00dev,
3093 int power_level, int max_power)
3094 {
3095 int delta;
3096
3097 if (test_bit(CAPABILITY_POWER_LIMIT, &rt2x00dev->cap_flags))
3098 return 0;
3099
3100 /*
3101 * XXX: We don't know the maximum transmit power of our hardware since
3102 * the EEPROM doesn't expose it. We only know that we are calibrated
3103 * to 100% tx power.
3104 *
3105 * Hence, we assume the regulatory limit that cfg80211 calulated for
3106 * the current channel is our maximum and if we are requested to lower
3107 * the value we just reduce our tx power accordingly.
3108 */
3109 delta = power_level - max_power;
3110 return min(delta, 0);
3111 }
3112
3113 static u8 rt2800_compensate_txpower(struct rt2x00_dev *rt2x00dev, int is_rate_b,
3114 enum ieee80211_band band, int power_level,
3115 u8 txpower, int delta)
3116 {
3117 u16 eeprom;
3118 u8 criterion;
3119 u8 eirp_txpower;
3120 u8 eirp_txpower_criterion;
3121 u8 reg_limit;
3122
3123 if (test_bit(CAPABILITY_POWER_LIMIT, &rt2x00dev->cap_flags)) {
3124 /*
3125 * Check if eirp txpower exceed txpower_limit.
3126 * We use OFDM 6M as criterion and its eirp txpower
3127 * is stored at EEPROM_EIRP_MAX_TX_POWER.
3128 * .11b data rate need add additional 4dbm
3129 * when calculating eirp txpower.
3130 */
3131 rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE,
3132 1, &eeprom);
3133 criterion = rt2x00_get_field16(eeprom,
3134 EEPROM_TXPOWER_BYRATE_RATE0);
3135
3136 rt2800_eeprom_read(rt2x00dev, EEPROM_EIRP_MAX_TX_POWER,
3137 &eeprom);
3138
3139 if (band == IEEE80211_BAND_2GHZ)
3140 eirp_txpower_criterion = rt2x00_get_field16(eeprom,
3141 EEPROM_EIRP_MAX_TX_POWER_2GHZ);
3142 else
3143 eirp_txpower_criterion = rt2x00_get_field16(eeprom,
3144 EEPROM_EIRP_MAX_TX_POWER_5GHZ);
3145
3146 eirp_txpower = eirp_txpower_criterion + (txpower - criterion) +
3147 (is_rate_b ? 4 : 0) + delta;
3148
3149 reg_limit = (eirp_txpower > power_level) ?
3150 (eirp_txpower - power_level) : 0;
3151 } else
3152 reg_limit = 0;
3153
3154 txpower = max(0, txpower + delta - reg_limit);
3155 return min_t(u8, txpower, 0xc);
3156 }
3157
3158 /*
3159 * We configure transmit power using MAC TX_PWR_CFG_{0,...,N} registers and
3160 * BBP R1 register. TX_PWR_CFG_X allow to configure per rate TX power values,
3161 * 4 bits for each rate (tune from 0 to 15 dBm). BBP_R1 controls transmit power
3162 * for all rates, but allow to set only 4 discrete values: -12, -6, 0 and 6 dBm.
3163 * Reference per rate transmit power values are located in the EEPROM at
3164 * EEPROM_TXPOWER_BYRATE offset. We adjust them and BBP R1 settings according to
3165 * current conditions (i.e. band, bandwidth, temperature, user settings).
3166 */
3167 static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
3168 struct ieee80211_channel *chan,
3169 int power_level)
3170 {
3171 u8 txpower, r1;
3172 u16 eeprom;
3173 u32 reg, offset;
3174 int i, is_rate_b, delta, power_ctrl;
3175 enum ieee80211_band band = chan->band;
3176
3177 /*
3178 * Calculate HT40 compensation. For 40MHz we need to add or subtract
3179 * value read from EEPROM (different for 2GHz and for 5GHz).
3180 */
3181 delta = rt2800_get_txpower_bw_comp(rt2x00dev, band);
3182
3183 /*
3184 * Calculate temperature compensation. Depends on measurement of current
3185 * TSSI (Transmitter Signal Strength Indication) we know TX power (due
3186 * to temperature or maybe other factors) is smaller or bigger than
3187 * expected. We adjust it, based on TSSI reference and boundaries values
3188 * provided in EEPROM.
3189 */
3190 delta += rt2800_get_gain_calibration_delta(rt2x00dev);
3191
3192 /*
3193 * Decrease power according to user settings, on devices with unknown
3194 * maximum tx power. For other devices we take user power_level into
3195 * consideration on rt2800_compensate_txpower().
3196 */
3197 delta += rt2800_get_txpower_reg_delta(rt2x00dev, power_level,
3198 chan->max_power);
3199
3200 /*
3201 * BBP_R1 controls TX power for all rates, it allow to set the following
3202 * gains -12, -6, 0, +6 dBm by setting values 2, 1, 0, 3 respectively.
3203 *
3204 * TODO: we do not use +6 dBm option to do not increase power beyond
3205 * regulatory limit, however this could be utilized for devices with
3206 * CAPABILITY_POWER_LIMIT.
3207 *
3208 * TODO: add different temperature compensation code for RT3290 & RT5390
3209 * to allow to use BBP_R1 for those chips.
3210 */
3211 if (!rt2x00_rt(rt2x00dev, RT3290) &&
3212 !rt2x00_rt(rt2x00dev, RT5390)) {
3213 rt2800_bbp_read(rt2x00dev, 1, &r1);
3214 if (delta <= -12) {
3215 power_ctrl = 2;
3216 delta += 12;
3217 } else if (delta <= -6) {
3218 power_ctrl = 1;
3219 delta += 6;
3220 } else {
3221 power_ctrl = 0;
3222 }
3223 rt2x00_set_field8(&r1, BBP1_TX_POWER_CTRL, power_ctrl);
3224 rt2800_bbp_write(rt2x00dev, 1, r1);
3225 }
3226
3227 offset = TX_PWR_CFG_0;
3228
3229 for (i = 0; i < EEPROM_TXPOWER_BYRATE_SIZE; i += 2) {
3230 /* just to be safe */
3231 if (offset > TX_PWR_CFG_4)
3232 break;
3233
3234 rt2800_register_read(rt2x00dev, offset, &reg);
3235
3236 /* read the next four txpower values */
3237 rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE,
3238 i, &eeprom);
3239
3240 is_rate_b = i ? 0 : 1;
3241 /*
3242 * TX_PWR_CFG_0: 1MBS, TX_PWR_CFG_1: 24MBS,
3243 * TX_PWR_CFG_2: MCS4, TX_PWR_CFG_3: MCS12,
3244 * TX_PWR_CFG_4: unknown
3245 */
3246 txpower = rt2x00_get_field16(eeprom,
3247 EEPROM_TXPOWER_BYRATE_RATE0);
3248 txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
3249 power_level, txpower, delta);
3250 rt2x00_set_field32(&reg, TX_PWR_CFG_RATE0, txpower);
3251
3252 /*
3253 * TX_PWR_CFG_0: 2MBS, TX_PWR_CFG_1: 36MBS,
3254 * TX_PWR_CFG_2: MCS5, TX_PWR_CFG_3: MCS13,
3255 * TX_PWR_CFG_4: unknown
3256 */
3257 txpower = rt2x00_get_field16(eeprom,
3258 EEPROM_TXPOWER_BYRATE_RATE1);
3259 txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
3260 power_level, txpower, delta);
3261 rt2x00_set_field32(&reg, TX_PWR_CFG_RATE1, txpower);
3262
3263 /*
3264 * TX_PWR_CFG_0: 5.5MBS, TX_PWR_CFG_1: 48MBS,
3265 * TX_PWR_CFG_2: MCS6, TX_PWR_CFG_3: MCS14,
3266 * TX_PWR_CFG_4: unknown
3267 */
3268 txpower = rt2x00_get_field16(eeprom,
3269 EEPROM_TXPOWER_BYRATE_RATE2);
3270 txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
3271 power_level, txpower, delta);
3272 rt2x00_set_field32(&reg, TX_PWR_CFG_RATE2, txpower);
3273
3274 /*
3275 * TX_PWR_CFG_0: 11MBS, TX_PWR_CFG_1: 54MBS,
3276 * TX_PWR_CFG_2: MCS7, TX_PWR_CFG_3: MCS15,
3277 * TX_PWR_CFG_4: unknown
3278 */
3279 txpower = rt2x00_get_field16(eeprom,
3280 EEPROM_TXPOWER_BYRATE_RATE3);
3281 txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
3282 power_level, txpower, delta);
3283 rt2x00_set_field32(&reg, TX_PWR_CFG_RATE3, txpower);
3284
3285 /* read the next four txpower values */
3286 rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE,
3287 i + 1, &eeprom);
3288
3289 is_rate_b = 0;
3290 /*
3291 * TX_PWR_CFG_0: 6MBS, TX_PWR_CFG_1: MCS0,
3292 * TX_PWR_CFG_2: MCS8, TX_PWR_CFG_3: unknown,
3293 * TX_PWR_CFG_4: unknown
3294 */
3295 txpower = rt2x00_get_field16(eeprom,
3296 EEPROM_TXPOWER_BYRATE_RATE0);
3297 txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
3298 power_level, txpower, delta);
3299 rt2x00_set_field32(&reg, TX_PWR_CFG_RATE4, txpower);
3300
3301 /*
3302 * TX_PWR_CFG_0: 9MBS, TX_PWR_CFG_1: MCS1,
3303 * TX_PWR_CFG_2: MCS9, TX_PWR_CFG_3: unknown,
3304 * TX_PWR_CFG_4: unknown
3305 */
3306 txpower = rt2x00_get_field16(eeprom,
3307 EEPROM_TXPOWER_BYRATE_RATE1);
3308 txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
3309 power_level, txpower, delta);
3310 rt2x00_set_field32(&reg, TX_PWR_CFG_RATE5, txpower);
3311
3312 /*
3313 * TX_PWR_CFG_0: 12MBS, TX_PWR_CFG_1: MCS2,
3314 * TX_PWR_CFG_2: MCS10, TX_PWR_CFG_3: unknown,
3315 * TX_PWR_CFG_4: unknown
3316 */
3317 txpower = rt2x00_get_field16(eeprom,
3318 EEPROM_TXPOWER_BYRATE_RATE2);
3319 txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
3320 power_level, txpower, delta);
3321 rt2x00_set_field32(&reg, TX_PWR_CFG_RATE6, txpower);
3322
3323 /*
3324 * TX_PWR_CFG_0: 18MBS, TX_PWR_CFG_1: MCS3,
3325 * TX_PWR_CFG_2: MCS11, TX_PWR_CFG_3: unknown,
3326 * TX_PWR_CFG_4: unknown
3327 */
3328 txpower = rt2x00_get_field16(eeprom,
3329 EEPROM_TXPOWER_BYRATE_RATE3);
3330 txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band,
3331 power_level, txpower, delta);
3332 rt2x00_set_field32(&reg, TX_PWR_CFG_RATE7, txpower);
3333
3334 rt2800_register_write(rt2x00dev, offset, reg);
3335
3336 /* next TX_PWR_CFG register */
3337 offset += 4;
3338 }
3339 }
3340
3341 void rt2800_gain_calibration(struct rt2x00_dev *rt2x00dev)
3342 {
3343 rt2800_config_txpower(rt2x00dev, rt2x00dev->hw->conf.chandef.chan,
3344 rt2x00dev->tx_power);
3345 }
3346 EXPORT_SYMBOL_GPL(rt2800_gain_calibration);
3347
3348 void rt2800_vco_calibration(struct rt2x00_dev *rt2x00dev)
3349 {
3350 u32 tx_pin;
3351 u8 rfcsr;
3352
3353 /*
3354 * A voltage-controlled oscillator(VCO) is an electronic oscillator
3355 * designed to be controlled in oscillation frequency by a voltage
3356 * input. Maybe the temperature will affect the frequency of
3357 * oscillation to be shifted. The VCO calibration will be called
3358 * periodically to adjust the frequency to be precision.
3359 */
3360
3361 rt2800_register_read(rt2x00dev, TX_PIN_CFG, &tx_pin);
3362 tx_pin &= TX_PIN_CFG_PA_PE_DISABLE;
3363 rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
3364
3365 switch (rt2x00dev->chip.rf) {
3366 case RF2020:
3367 case RF3020:
3368 case RF3021:
3369 case RF3022:
3370 case RF3320:
3371 case RF3052:
3372 rt2800_rfcsr_read(rt2x00dev, 7, &rfcsr);
3373 rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
3374 rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
3375 break;
3376 case RF3290:
3377 case RF5360:
3378 case RF5370:
3379 case RF5372:
3380 case RF5390:
3381 case RF5392:
3382 rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr);
3383 rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1);
3384 rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
3385 break;
3386 default:
3387 return;
3388 }
3389
3390 mdelay(1);
3391
3392 rt2800_register_read(rt2x00dev, TX_PIN_CFG, &tx_pin);
3393 if (rt2x00dev->rf_channel <= 14) {
3394 switch (rt2x00dev->default_ant.tx_chain_num) {
3395 case 3:
3396 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G2_EN, 1);
3397 /* fall through */
3398 case 2:
3399 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
3400 /* fall through */
3401 case 1:
3402 default:
3403 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1);
3404 break;
3405 }
3406 } else {
3407 switch (rt2x00dev->default_ant.tx_chain_num) {
3408 case 3:
3409 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A2_EN, 1);
3410 /* fall through */
3411 case 2:
3412 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1);
3413 /* fall through */
3414 case 1:
3415 default:
3416 rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, 1);
3417 break;
3418 }
3419 }
3420 rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
3421
3422 }
3423 EXPORT_SYMBOL_GPL(rt2800_vco_calibration);
3424
3425 static void rt2800_config_retry_limit(struct rt2x00_dev *rt2x00dev,
3426 struct rt2x00lib_conf *libconf)
3427 {
3428 u32 reg;
3429
3430 rt2800_register_read(rt2x00dev, TX_RTY_CFG, &reg);
3431 rt2x00_set_field32(&reg, TX_RTY_CFG_SHORT_RTY_LIMIT,
3432 libconf->conf->short_frame_max_tx_count);
3433 rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_LIMIT,
3434 libconf->conf->long_frame_max_tx_count);
3435 rt2800_register_write(rt2x00dev, TX_RTY_CFG, reg);
3436 }
3437
3438 static void rt2800_config_ps(struct rt2x00_dev *rt2x00dev,
3439 struct rt2x00lib_conf *libconf)
3440 {
3441 enum dev_state state =
3442 (libconf->conf->flags & IEEE80211_CONF_PS) ?
3443 STATE_SLEEP : STATE_AWAKE;
3444 u32 reg;
3445
3446 if (state == STATE_SLEEP) {
3447 rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
3448
3449 rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
3450 rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5);
3451 rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE,
3452 libconf->conf->listen_interval - 1);
3453 rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 1);
3454 rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
3455
3456 rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
3457 } else {
3458 rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
3459 rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0);
3460 rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0);
3461 rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 0);
3462 rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
3463
3464 rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
3465 }
3466 }
3467
3468 void rt2800_config(struct rt2x00_dev *rt2x00dev,
3469 struct rt2x00lib_conf *libconf,
3470 const unsigned int flags)
3471 {
3472 /* Always recalculate LNA gain before changing configuration */
3473 rt2800_config_lna_gain(rt2x00dev, libconf);
3474
3475 if (flags & IEEE80211_CONF_CHANGE_CHANNEL) {
3476 rt2800_config_channel(rt2x00dev, libconf->conf,
3477 &libconf->rf, &libconf->channel);
3478 rt2800_config_txpower(rt2x00dev, libconf->conf->chandef.chan,
3479 libconf->conf->power_level);
3480 }
3481 if (flags & IEEE80211_CONF_CHANGE_POWER)
3482 rt2800_config_txpower(rt2x00dev, libconf->conf->chandef.chan,
3483 libconf->conf->power_level);
3484 if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
3485 rt2800_config_retry_limit(rt2x00dev, libconf);
3486 if (flags & IEEE80211_CONF_CHANGE_PS)
3487 rt2800_config_ps(rt2x00dev, libconf);
3488 }
3489 EXPORT_SYMBOL_GPL(rt2800_config);
3490
3491 /*
3492 * Link tuning
3493 */
3494 void rt2800_link_stats(struct rt2x00_dev *rt2x00dev, struct link_qual *qual)
3495 {
3496 u32 reg;
3497
3498 /*
3499 * Update FCS error count from register.
3500 */
3501 rt2800_register_read(rt2x00dev, RX_STA_CNT0, &reg);
3502 qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR);
3503 }
3504 EXPORT_SYMBOL_GPL(rt2800_link_stats);
3505
3506 static u8 rt2800_get_default_vgc(struct rt2x00_dev *rt2x00dev)
3507 {
3508 u8 vgc;
3509
3510 if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
3511 if (rt2x00_rt(rt2x00dev, RT3070) ||
3512 rt2x00_rt(rt2x00dev, RT3071) ||
3513 rt2x00_rt(rt2x00dev, RT3090) ||
3514 rt2x00_rt(rt2x00dev, RT3290) ||
3515 rt2x00_rt(rt2x00dev, RT3390) ||
3516 rt2x00_rt(rt2x00dev, RT3572) ||
3517 rt2x00_rt(rt2x00dev, RT5390) ||
3518 rt2x00_rt(rt2x00dev, RT5392) ||
3519 rt2x00_rt(rt2x00dev, RT5592))
3520 vgc = 0x1c + (2 * rt2x00dev->lna_gain);
3521 else
3522 vgc = 0x2e + rt2x00dev->lna_gain;
3523 } else { /* 5GHZ band */
3524 if (rt2x00_rt(rt2x00dev, RT3572))
3525 vgc = 0x22 + (rt2x00dev->lna_gain * 5) / 3;
3526 else if (rt2x00_rt(rt2x00dev, RT5592))
3527 vgc = 0x24 + (2 * rt2x00dev->lna_gain);
3528 else {
3529 if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
3530 vgc = 0x32 + (rt2x00dev->lna_gain * 5) / 3;
3531 else
3532 vgc = 0x3a + (rt2x00dev->lna_gain * 5) / 3;
3533 }
3534 }
3535
3536 return vgc;
3537 }
3538
3539 static inline void rt2800_set_vgc(struct rt2x00_dev *rt2x00dev,
3540 struct link_qual *qual, u8 vgc_level)
3541 {
3542 if (qual->vgc_level != vgc_level) {
3543 if (rt2x00_rt(rt2x00dev, RT5592)) {
3544 rt2800_bbp_write(rt2x00dev, 83, qual->rssi > -65 ? 0x4a : 0x7a);
3545 rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, vgc_level);
3546 } else
3547 rt2800_bbp_write(rt2x00dev, 66, vgc_level);
3548 qual->vgc_level = vgc_level;
3549 qual->vgc_level_reg = vgc_level;
3550 }
3551 }
3552
3553 void rt2800_reset_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual)
3554 {
3555 rt2800_set_vgc(rt2x00dev, qual, rt2800_get_default_vgc(rt2x00dev));
3556 }
3557 EXPORT_SYMBOL_GPL(rt2800_reset_tuner);
3558
3559 void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual,
3560 const u32 count)
3561 {
3562 u8 vgc;
3563
3564 if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C))
3565 return;
3566 /*
3567 * When RSSI is better then -80 increase VGC level with 0x10, except
3568 * for rt5592 chip.
3569 */
3570
3571 vgc = rt2800_get_default_vgc(rt2x00dev);
3572
3573 if (rt2x00_rt(rt2x00dev, RT5592) && qual->rssi > -65)
3574 vgc += 0x20;
3575 else if (qual->rssi > -80)
3576 vgc += 0x10;
3577
3578 rt2800_set_vgc(rt2x00dev, qual, vgc);
3579 }
3580 EXPORT_SYMBOL_GPL(rt2800_link_tuner);
3581
3582 /*
3583 * Initialization functions.
3584 */
3585 static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
3586 {
3587 u32 reg;
3588 u16 eeprom;
3589 unsigned int i;
3590 int ret;
3591
3592 rt2800_disable_wpdma(rt2x00dev);
3593
3594 ret = rt2800_drv_init_registers(rt2x00dev);
3595 if (ret)
3596 return ret;
3597
3598 rt2800_register_read(rt2x00dev, BCN_OFFSET0, &reg);
3599 rt2x00_set_field32(&reg, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */
3600 rt2x00_set_field32(&reg, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */
3601 rt2x00_set_field32(&reg, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */
3602 rt2x00_set_field32(&reg, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */
3603 rt2800_register_write(rt2x00dev, BCN_OFFSET0, reg);
3604
3605 rt2800_register_read(rt2x00dev, BCN_OFFSET1, &reg);
3606 rt2x00_set_field32(&reg, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */
3607 rt2x00_set_field32(&reg, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */
3608 rt2x00_set_field32(&reg, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */
3609 rt2x00_set_field32(&reg, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */
3610 rt2800_register_write(rt2x00dev, BCN_OFFSET1, reg);
3611
3612 rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f);
3613 rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
3614
3615 rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
3616
3617 rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
3618 rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL, 1600);
3619 rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 0);
3620 rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, 0);
3621 rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 0);
3622 rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
3623 rt2x00_set_field32(&reg, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0);
3624 rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
3625
3626 rt2800_config_filter(rt2x00dev, FIF_ALLMULTI);
3627
3628 rt2800_register_read(rt2x00dev, BKOFF_SLOT_CFG, &reg);
3629 rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_SLOT_TIME, 9);
3630 rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2);
3631 rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
3632
3633 if (rt2x00_rt(rt2x00dev, RT3290)) {
3634 rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, &reg);
3635 if (rt2x00_get_field32(reg, WLAN_EN) == 1) {
3636 rt2x00_set_field32(&reg, PCIE_APP0_CLK_REQ, 1);
3637 rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
3638 }
3639
3640 rt2800_register_read(rt2x00dev, CMB_CTRL, &reg);
3641 if (!(rt2x00_get_field32(reg, LDO0_EN) == 1)) {
3642 rt2x00_set_field32(&reg, LDO0_EN, 1);
3643 rt2x00_set_field32(&reg, LDO_BGSEL, 3);
3644 rt2800_register_write(rt2x00dev, CMB_CTRL, reg);
3645 }
3646
3647 rt2800_register_read(rt2x00dev, OSC_CTRL, &reg);
3648 rt2x00_set_field32(&reg, OSC_ROSC_EN, 1);
3649 rt2x00_set_field32(&reg, OSC_CAL_REQ, 1);
3650 rt2x00_set_field32(&reg, OSC_REF_CYCLE, 0x27);
3651 rt2800_register_write(rt2x00dev, OSC_CTRL, reg);
3652
3653 rt2800_register_read(rt2x00dev, COEX_CFG0, &reg);
3654 rt2x00_set_field32(&reg, COEX_CFG_ANT, 0x5e);
3655 rt2800_register_write(rt2x00dev, COEX_CFG0, reg);
3656
3657 rt2800_register_read(rt2x00dev, COEX_CFG2, &reg);
3658 rt2x00_set_field32(&reg, BT_COEX_CFG1, 0x00);
3659 rt2x00_set_field32(&reg, BT_COEX_CFG0, 0x17);
3660 rt2x00_set_field32(&reg, WL_COEX_CFG1, 0x93);
3661 rt2x00_set_field32(&reg, WL_COEX_CFG0, 0x7f);
3662 rt2800_register_write(rt2x00dev, COEX_CFG2, reg);
3663
3664 rt2800_register_read(rt2x00dev, PLL_CTRL, &reg);
3665 rt2x00_set_field32(&reg, PLL_CONTROL, 1);
3666 rt2800_register_write(rt2x00dev, PLL_CTRL, reg);
3667 }
3668
3669 if (rt2x00_rt(rt2x00dev, RT3071) ||
3670 rt2x00_rt(rt2x00dev, RT3090) ||
3671 rt2x00_rt(rt2x00dev, RT3290) ||
3672 rt2x00_rt(rt2x00dev, RT3390)) {
3673
3674 if (rt2x00_rt(rt2x00dev, RT3290))
3675 rt2800_register_write(rt2x00dev, TX_SW_CFG0,
3676 0x00000404);
3677 else
3678 rt2800_register_write(rt2x00dev, TX_SW_CFG0,
3679 0x00000400);
3680
3681 rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
3682 if (rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
3683 rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) ||
3684 rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E)) {
3685 rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1,
3686 &eeprom);
3687 if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_DAC_TEST))
3688 rt2800_register_write(rt2x00dev, TX_SW_CFG2,
3689 0x0000002c);
3690 else
3691 rt2800_register_write(rt2x00dev, TX_SW_CFG2,
3692 0x0000000f);
3693 } else {
3694 rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
3695 }
3696 } else if (rt2x00_rt(rt2x00dev, RT3070)) {
3697 rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
3698
3699 if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) {
3700 rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
3701 rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x0000002c);
3702 } else {
3703 rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
3704 rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
3705 }
3706 } else if (rt2800_is_305x_soc(rt2x00dev)) {
3707 rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
3708 rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
3709 rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000030);
3710 } else if (rt2x00_rt(rt2x00dev, RT3352)) {
3711 rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000402);
3712 rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
3713 rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
3714 } else if (rt2x00_rt(rt2x00dev, RT3572)) {
3715 rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
3716 rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
3717 } else if (rt2x00_rt(rt2x00dev, RT3593)) {
3718 rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000402);
3719 rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
3720 if (rt2x00_rt_rev_lt(rt2x00dev, RT3593, REV_RT3593E)) {
3721 rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1,
3722 &eeprom);
3723 if (rt2x00_get_field16(eeprom,
3724 EEPROM_NIC_CONF1_DAC_TEST))
3725 rt2800_register_write(rt2x00dev, TX_SW_CFG2,
3726 0x0000001f);
3727 else
3728 rt2800_register_write(rt2x00dev, TX_SW_CFG2,
3729 0x0000000f);
3730 } else {
3731 rt2800_register_write(rt2x00dev, TX_SW_CFG2,
3732 0x00000000);
3733 }
3734 } else if (rt2x00_rt(rt2x00dev, RT5390) ||
3735 rt2x00_rt(rt2x00dev, RT5392) ||
3736 rt2x00_rt(rt2x00dev, RT5592)) {
3737 rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
3738 rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
3739 rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
3740 } else {
3741 rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000);
3742 rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
3743 }
3744
3745 rt2800_register_read(rt2x00dev, TX_LINK_CFG, &reg);
3746 rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32);
3747 rt2x00_set_field32(&reg, TX_LINK_CFG_MFB_ENABLE, 0);
3748 rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0);
3749 rt2x00_set_field32(&reg, TX_LINK_CFG_TX_MRQ_EN, 0);
3750 rt2x00_set_field32(&reg, TX_LINK_CFG_TX_RDG_EN, 0);
3751 rt2x00_set_field32(&reg, TX_LINK_CFG_TX_CF_ACK_EN, 1);
3752 rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFB, 0);
3753 rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFS, 0);
3754 rt2800_register_write(rt2x00dev, TX_LINK_CFG, reg);
3755
3756 rt2800_register_read(rt2x00dev, TX_TIMEOUT_CFG, &reg);
3757 rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9);
3758 rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 32);
3759 rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10);
3760 rt2800_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
3761
3762 rt2800_register_read(rt2x00dev, MAX_LEN_CFG, &reg);
3763 rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
3764 if (rt2x00_rt_rev_gte(rt2x00dev, RT2872, REV_RT2872E) ||
3765 rt2x00_rt(rt2x00dev, RT2883) ||
3766 rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070E))
3767 rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 2);
3768 else
3769 rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 1);
3770 rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_PSDU, 0);
3771 rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_MPDU, 0);
3772 rt2800_register_write(rt2x00dev, MAX_LEN_CFG, reg);
3773
3774 rt2800_register_read(rt2x00dev, LED_CFG, &reg);
3775 rt2x00_set_field32(&reg, LED_CFG_ON_PERIOD, 70);
3776 rt2x00_set_field32(&reg, LED_CFG_OFF_PERIOD, 30);
3777 rt2x00_set_field32(&reg, LED_CFG_SLOW_BLINK_PERIOD, 3);
3778 rt2x00_set_field32(&reg, LED_CFG_R_LED_MODE, 3);
3779 rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE, 3);
3780 rt2x00_set_field32(&reg, LED_CFG_Y_LED_MODE, 3);
3781 rt2x00_set_field32(&reg, LED_CFG_LED_POLAR, 1);
3782 rt2800_register_write(rt2x00dev, LED_CFG, reg);
3783
3784 rt2800_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f);
3785
3786 rt2800_register_read(rt2x00dev, TX_RTY_CFG, &reg);
3787 rt2x00_set_field32(&reg, TX_RTY_CFG_SHORT_RTY_LIMIT, 15);
3788 rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_LIMIT, 31);
3789 rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_THRE, 2000);
3790 rt2x00_set_field32(&reg, TX_RTY_CFG_NON_AGG_RTY_MODE, 0);
3791 rt2x00_set_field32(&reg, TX_RTY_CFG_AGG_RTY_MODE, 0);
3792 rt2x00_set_field32(&reg, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1);
3793 rt2800_register_write(rt2x00dev, TX_RTY_CFG, reg);
3794
3795 rt2800_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
3796 rt2x00_set_field32(&reg, AUTO_RSP_CFG_AUTORESPONDER, 1);
3797 rt2x00_set_field32(&reg, AUTO_RSP_CFG_BAC_ACK_POLICY, 1);
3798 rt2x00_set_field32(&reg, AUTO_RSP_CFG_CTS_40_MMODE, 0);
3799 rt2x00_set_field32(&reg, AUTO_RSP_CFG_CTS_40_MREF, 0);
3800 rt2x00_set_field32(&reg, AUTO_RSP_CFG_AR_PREAMBLE, 1);
3801 rt2x00_set_field32(&reg, AUTO_RSP_CFG_DUAL_CTS_EN, 0);
3802 rt2x00_set_field32(&reg, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0);
3803 rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
3804
3805 rt2800_register_read(rt2x00dev, CCK_PROT_CFG, &reg);
3806 rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_RATE, 3);
3807 rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_CTRL, 0);
3808 rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_NAV_SHORT, 1);
3809 rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1);
3810 rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
3811 rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1);
3812 rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 0);
3813 rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1);
3814 rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 0);
3815 rt2x00_set_field32(&reg, CCK_PROT_CFG_RTS_TH_EN, 1);
3816 rt2800_register_write(rt2x00dev, CCK_PROT_CFG, reg);
3817
3818 rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
3819 rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_RATE, 3);
3820 rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_CTRL, 0);
3821 rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_NAV_SHORT, 1);
3822 rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1);
3823 rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
3824 rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1);
3825 rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 0);
3826 rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1);
3827 rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 0);
3828 rt2x00_set_field32(&reg, OFDM_PROT_CFG_RTS_TH_EN, 1);
3829 rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
3830
3831 rt2800_register_read(rt2x00dev, MM20_PROT_CFG, &reg);
3832 rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_RATE, 0x4004);
3833 rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_CTRL, 0);
3834 rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_NAV_SHORT, 1);
3835 rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
3836 rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
3837 rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
3838 rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
3839 rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
3840 rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
3841 rt2x00_set_field32(&reg, MM20_PROT_CFG_RTS_TH_EN, 0);
3842 rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg);
3843
3844 rt2800_register_read(rt2x00dev, MM40_PROT_CFG, &reg);
3845 rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_RATE, 0x4084);
3846 rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_CTRL, 0);
3847 rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_NAV_SHORT, 1);
3848 rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
3849 rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
3850 rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
3851 rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
3852 rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
3853 rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
3854 rt2x00_set_field32(&reg, MM40_PROT_CFG_RTS_TH_EN, 0);
3855 rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg);
3856
3857 rt2800_register_read(rt2x00dev, GF20_PROT_CFG, &reg);
3858 rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_RATE, 0x4004);
3859 rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_CTRL, 0);
3860 rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_NAV_SHORT, 1);
3861 rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
3862 rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
3863 rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
3864 rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
3865 rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
3866 rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
3867 rt2x00_set_field32(&reg, GF20_PROT_CFG_RTS_TH_EN, 0);
3868 rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg);
3869
3870 rt2800_register_read(rt2x00dev, GF40_PROT_CFG, &reg);
3871 rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_RATE, 0x4084);
3872 rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_CTRL, 0);
3873 rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_NAV_SHORT, 1);
3874 rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
3875 rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
3876 rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
3877 rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
3878 rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
3879 rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
3880 rt2x00_set_field32(&reg, GF40_PROT_CFG_RTS_TH_EN, 0);
3881 rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg);
3882
3883 if (rt2x00_is_usb(rt2x00dev)) {
3884 rt2800_register_write(rt2x00dev, PBF_CFG, 0xf40006);
3885
3886 rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
3887 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
3888 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
3889 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
3890 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
3891 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 3);
3892 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 0);
3893 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_BIG_ENDIAN, 0);
3894 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_HDR_SCATTER, 0);
3895 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_HDR_SEG_LEN, 0);
3896 rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
3897 }
3898
3899 /*
3900 * The legacy driver also sets TXOP_CTRL_CFG_RESERVED_TRUN_EN to 1
3901 * although it is reserved.
3902 */
3903 rt2800_register_read(rt2x00dev, TXOP_CTRL_CFG, &reg);
3904 rt2x00_set_field32(&reg, TXOP_CTRL_CFG_TIMEOUT_TRUN_EN, 1);
3905 rt2x00_set_field32(&reg, TXOP_CTRL_CFG_AC_TRUN_EN, 1);
3906 rt2x00_set_field32(&reg, TXOP_CTRL_CFG_TXRATEGRP_TRUN_EN, 1);
3907 rt2x00_set_field32(&reg, TXOP_CTRL_CFG_USER_MODE_TRUN_EN, 1);
3908 rt2x00_set_field32(&reg, TXOP_CTRL_CFG_MIMO_PS_TRUN_EN, 1);
3909 rt2x00_set_field32(&reg, TXOP_CTRL_CFG_RESERVED_TRUN_EN, 1);
3910 rt2x00_set_field32(&reg, TXOP_CTRL_CFG_LSIG_TXOP_EN, 0);
3911 rt2x00_set_field32(&reg, TXOP_CTRL_CFG_EXT_CCA_EN, 0);
3912 rt2x00_set_field32(&reg, TXOP_CTRL_CFG_EXT_CCA_DLY, 88);
3913 rt2x00_set_field32(&reg, TXOP_CTRL_CFG_EXT_CWMIN, 0);
3914 rt2800_register_write(rt2x00dev, TXOP_CTRL_CFG, reg);
3915
3916 reg = rt2x00_rt(rt2x00dev, RT5592) ? 0x00000082 : 0x00000002;
3917 rt2800_register_write(rt2x00dev, TXOP_HLDR_ET, reg);
3918
3919 rt2800_register_read(rt2x00dev, TX_RTS_CFG, &reg);
3920 rt2x00_set_field32(&reg, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32);
3921 rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_THRES,
3922 IEEE80211_MAX_RTS_THRESHOLD);
3923 rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_FBK_EN, 0);
3924 rt2800_register_write(rt2x00dev, TX_RTS_CFG, reg);
3925
3926 rt2800_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca);
3927
3928 /*
3929 * Usually the CCK SIFS time should be set to 10 and the OFDM SIFS
3930 * time should be set to 16. However, the original Ralink driver uses
3931 * 16 for both and indeed using a value of 10 for CCK SIFS results in
3932 * connection problems with 11g + CTS protection. Hence, use the same
3933 * defaults as the Ralink driver: 16 for both, CCK and OFDM SIFS.
3934 */
3935 rt2800_register_read(rt2x00dev, XIFS_TIME_CFG, &reg);
3936 rt2x00_set_field32(&reg, XIFS_TIME_CFG_CCKM_SIFS_TIME, 16);
3937 rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_SIFS_TIME, 16);
3938 rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4);
3939 rt2x00_set_field32(&reg, XIFS_TIME_CFG_EIFS, 314);
3940 rt2x00_set_field32(&reg, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1);
3941 rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
3942
3943 rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
3944
3945 /*
3946 * ASIC will keep garbage value after boot, clear encryption keys.
3947 */
3948 for (i = 0; i < 4; i++)
3949 rt2800_register_write(rt2x00dev,
3950 SHARED_KEY_MODE_ENTRY(i), 0);
3951
3952 for (i = 0; i < 256; i++) {
3953 rt2800_config_wcid(rt2x00dev, NULL, i);
3954 rt2800_delete_wcid_attr(rt2x00dev, i);
3955 rt2800_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0);
3956 }
3957
3958 /*
3959 * Clear all beacons
3960 */
3961 rt2800_clear_beacon_register(rt2x00dev, HW_BEACON_BASE0);
3962 rt2800_clear_beacon_register(rt2x00dev, HW_BEACON_BASE1);
3963 rt2800_clear_beacon_register(rt2x00dev, HW_BEACON_BASE2);
3964 rt2800_clear_beacon_register(rt2x00dev, HW_BEACON_BASE3);
3965 rt2800_clear_beacon_register(rt2x00dev, HW_BEACON_BASE4);
3966 rt2800_clear_beacon_register(rt2x00dev, HW_BEACON_BASE5);
3967 rt2800_clear_beacon_register(rt2x00dev, HW_BEACON_BASE6);
3968 rt2800_clear_beacon_register(rt2x00dev, HW_BEACON_BASE7);
3969
3970 if (rt2x00_is_usb(rt2x00dev)) {
3971 rt2800_register_read(rt2x00dev, US_CYC_CNT, &reg);
3972 rt2x00_set_field32(&reg, US_CYC_CNT_CLOCK_CYCLE, 30);
3973 rt2800_register_write(rt2x00dev, US_CYC_CNT, reg);
3974 } else if (rt2x00_is_pcie(rt2x00dev)) {
3975 rt2800_register_read(rt2x00dev, US_CYC_CNT, &reg);
3976 rt2x00_set_field32(&reg, US_CYC_CNT_CLOCK_CYCLE, 125);
3977 rt2800_register_write(rt2x00dev, US_CYC_CNT, reg);
3978 }
3979
3980 rt2800_register_read(rt2x00dev, HT_FBK_CFG0, &reg);
3981 rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS0FBK, 0);
3982 rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS1FBK, 0);
3983 rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS2FBK, 1);
3984 rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS3FBK, 2);
3985 rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS4FBK, 3);
3986 rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS5FBK, 4);
3987 rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS6FBK, 5);
3988 rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS7FBK, 6);
3989 rt2800_register_write(rt2x00dev, HT_FBK_CFG0, reg);
3990
3991 rt2800_register_read(rt2x00dev, HT_FBK_CFG1, &reg);
3992 rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS8FBK, 8);
3993 rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS9FBK, 8);
3994 rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS10FBK, 9);
3995 rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS11FBK, 10);
3996 rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS12FBK, 11);
3997 rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS13FBK, 12);
3998 rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS14FBK, 13);
3999 rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS15FBK, 14);
4000 rt2800_register_write(rt2x00dev, HT_FBK_CFG1, reg);
4001
4002 rt2800_register_read(rt2x00dev, LG_FBK_CFG0, &reg);
4003 rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS0FBK, 8);
4004 rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS1FBK, 8);
4005 rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS2FBK, 9);
4006 rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS3FBK, 10);
4007 rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS4FBK, 11);
4008 rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS5FBK, 12);
4009 rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS6FBK, 13);
4010 rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS7FBK, 14);
4011 rt2800_register_write(rt2x00dev, LG_FBK_CFG0, reg);
4012
4013 rt2800_register_read(rt2x00dev, LG_FBK_CFG1, &reg);
4014 rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS0FBK, 0);
4015 rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS1FBK, 0);
4016 rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS2FBK, 1);
4017 rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS3FBK, 2);
4018 rt2800_register_write(rt2x00dev, LG_FBK_CFG1, reg);
4019
4020 /*
4021 * Do not force the BA window size, we use the TXWI to set it
4022 */
4023 rt2800_register_read(rt2x00dev, AMPDU_BA_WINSIZE, &reg);
4024 rt2x00_set_field32(&reg, AMPDU_BA_WINSIZE_FORCE_WINSIZE_ENABLE, 0);
4025 rt2x00_set_field32(&reg, AMPDU_BA_WINSIZE_FORCE_WINSIZE, 0);
4026 rt2800_register_write(rt2x00dev, AMPDU_BA_WINSIZE, reg);
4027
4028 /*
4029 * We must clear the error counters.
4030 * These registers are cleared on read,
4031 * so we may pass a useless variable to store the value.
4032 */
4033 rt2800_register_read(rt2x00dev, RX_STA_CNT0, &reg);
4034 rt2800_register_read(rt2x00dev, RX_STA_CNT1, &reg);
4035 rt2800_register_read(rt2x00dev, RX_STA_CNT2, &reg);
4036 rt2800_register_read(rt2x00dev, TX_STA_CNT0, &reg);
4037 rt2800_register_read(rt2x00dev, TX_STA_CNT1, &reg);
4038 rt2800_register_read(rt2x00dev, TX_STA_CNT2, &reg);
4039
4040 /*
4041 * Setup leadtime for pre tbtt interrupt to 6ms
4042 */
4043 rt2800_register_read(rt2x00dev, INT_TIMER_CFG, &reg);
4044 rt2x00_set_field32(&reg, INT_TIMER_CFG_PRE_TBTT_TIMER, 6 << 4);
4045 rt2800_register_write(rt2x00dev, INT_TIMER_CFG, reg);
4046
4047 /*
4048 * Set up channel statistics timer
4049 */
4050 rt2800_register_read(rt2x00dev, CH_TIME_CFG, &reg);
4051 rt2x00_set_field32(&reg, CH_TIME_CFG_EIFS_BUSY, 1);
4052 rt2x00_set_field32(&reg, CH_TIME_CFG_NAV_BUSY, 1);
4053 rt2x00_set_field32(&reg, CH_TIME_CFG_RX_BUSY, 1);
4054 rt2x00_set_field32(&reg, CH_TIME_CFG_TX_BUSY, 1);
4055 rt2x00_set_field32(&reg, CH_TIME_CFG_TMR_EN, 1);
4056 rt2800_register_write(rt2x00dev, CH_TIME_CFG, reg);
4057
4058 return 0;
4059 }
4060
4061 static int rt2800_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev)
4062 {
4063 unsigned int i;
4064 u32 reg;
4065
4066 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
4067 rt2800_register_read(rt2x00dev, MAC_STATUS_CFG, &reg);
4068 if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY))
4069 return 0;
4070
4071 udelay(REGISTER_BUSY_DELAY);
4072 }
4073
4074 rt2x00_err(rt2x00dev, "BBP/RF register access failed, aborting\n");
4075 return -EACCES;
4076 }
4077
4078 static int rt2800_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
4079 {
4080 unsigned int i;
4081 u8 value;
4082
4083 /*
4084 * BBP was enabled after firmware was loaded,
4085 * but we need to reactivate it now.
4086 */
4087 rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
4088 rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
4089 msleep(1);
4090
4091 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
4092 rt2800_bbp_read(rt2x00dev, 0, &value);
4093 if ((value != 0xff) && (value != 0x00))
4094 return 0;
4095 udelay(REGISTER_BUSY_DELAY);
4096 }
4097
4098 rt2x00_err(rt2x00dev, "BBP register access failed, aborting\n");
4099 return -EACCES;
4100 }
4101
4102 static void rt2800_bbp4_mac_if_ctrl(struct rt2x00_dev *rt2x00dev)
4103 {
4104 u8 value;
4105
4106 rt2800_bbp_read(rt2x00dev, 4, &value);
4107 rt2x00_set_field8(&value, BBP4_MAC_IF_CTRL, 1);
4108 rt2800_bbp_write(rt2x00dev, 4, value);
4109 }
4110
4111 static void rt2800_init_freq_calibration(struct rt2x00_dev *rt2x00dev)
4112 {
4113 rt2800_bbp_write(rt2x00dev, 142, 1);
4114 rt2800_bbp_write(rt2x00dev, 143, 57);
4115 }
4116
4117 static void rt2800_init_bbp_5592_glrt(struct rt2x00_dev *rt2x00dev)
4118 {
4119 const u8 glrt_table[] = {
4120 0xE0, 0x1F, 0X38, 0x32, 0x08, 0x28, 0x19, 0x0A, 0xFF, 0x00, /* 128 ~ 137 */
4121 0x16, 0x10, 0x10, 0x0B, 0x36, 0x2C, 0x26, 0x24, 0x42, 0x36, /* 138 ~ 147 */
4122 0x30, 0x2D, 0x4C, 0x46, 0x3D, 0x40, 0x3E, 0x42, 0x3D, 0x40, /* 148 ~ 157 */
4123 0X3C, 0x34, 0x2C, 0x2F, 0x3C, 0x35, 0x2E, 0x2A, 0x49, 0x41, /* 158 ~ 167 */
4124 0x36, 0x31, 0x30, 0x30, 0x0E, 0x0D, 0x28, 0x21, 0x1C, 0x16, /* 168 ~ 177 */
4125 0x50, 0x4A, 0x43, 0x40, 0x10, 0x10, 0x10, 0x10, 0x00, 0x00, /* 178 ~ 187 */
4126 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 188 ~ 197 */
4127 0x00, 0x00, 0x7D, 0x14, 0x32, 0x2C, 0x36, 0x4C, 0x43, 0x2C, /* 198 ~ 207 */
4128 0x2E, 0x36, 0x30, 0x6E, /* 208 ~ 211 */
4129 };
4130 int i;
4131
4132 for (i = 0; i < ARRAY_SIZE(glrt_table); i++) {
4133 rt2800_bbp_write(rt2x00dev, 195, 128 + i);
4134 rt2800_bbp_write(rt2x00dev, 196, glrt_table[i]);
4135 }
4136 };
4137
4138 static void rt2800_init_bbp_early(struct rt2x00_dev *rt2x00dev)
4139 {
4140 rt2800_bbp_write(rt2x00dev, 65, 0x2C);
4141 rt2800_bbp_write(rt2x00dev, 66, 0x38);
4142 rt2800_bbp_write(rt2x00dev, 68, 0x0B);
4143 rt2800_bbp_write(rt2x00dev, 69, 0x12);
4144 rt2800_bbp_write(rt2x00dev, 70, 0x0a);
4145 rt2800_bbp_write(rt2x00dev, 73, 0x10);
4146 rt2800_bbp_write(rt2x00dev, 81, 0x37);
4147 rt2800_bbp_write(rt2x00dev, 82, 0x62);
4148 rt2800_bbp_write(rt2x00dev, 83, 0x6A);
4149 rt2800_bbp_write(rt2x00dev, 84, 0x99);
4150 rt2800_bbp_write(rt2x00dev, 86, 0x00);
4151 rt2800_bbp_write(rt2x00dev, 91, 0x04);
4152 rt2800_bbp_write(rt2x00dev, 92, 0x00);
4153 rt2800_bbp_write(rt2x00dev, 103, 0x00);
4154 rt2800_bbp_write(rt2x00dev, 105, 0x05);
4155 rt2800_bbp_write(rt2x00dev, 106, 0x35);
4156 }
4157
4158 static void rt2800_disable_unused_dac_adc(struct rt2x00_dev *rt2x00dev)
4159 {
4160 u16 eeprom;
4161 u8 value;
4162
4163 rt2800_bbp_read(rt2x00dev, 138, &value);
4164 rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &eeprom);
4165 if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) == 1)
4166 value |= 0x20;
4167 if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) == 1)
4168 value &= ~0x02;
4169 rt2800_bbp_write(rt2x00dev, 138, value);
4170 }
4171
4172 static void rt2800_init_bbp_305x_soc(struct rt2x00_dev *rt2x00dev)
4173 {
4174 rt2800_bbp_write(rt2x00dev, 31, 0x08);
4175
4176 rt2800_bbp_write(rt2x00dev, 65, 0x2c);
4177 rt2800_bbp_write(rt2x00dev, 66, 0x38);
4178
4179 rt2800_bbp_write(rt2x00dev, 69, 0x12);
4180 rt2800_bbp_write(rt2x00dev, 73, 0x10);
4181
4182 rt2800_bbp_write(rt2x00dev, 70, 0x0a);
4183
4184 rt2800_bbp_write(rt2x00dev, 78, 0x0e);
4185 rt2800_bbp_write(rt2x00dev, 80, 0x08);
4186
4187 rt2800_bbp_write(rt2x00dev, 82, 0x62);
4188
4189 rt2800_bbp_write(rt2x00dev, 83, 0x6a);
4190
4191 rt2800_bbp_write(rt2x00dev, 84, 0x99);
4192
4193 rt2800_bbp_write(rt2x00dev, 86, 0x00);
4194
4195 rt2800_bbp_write(rt2x00dev, 91, 0x04);
4196
4197 rt2800_bbp_write(rt2x00dev, 92, 0x00);
4198
4199 rt2800_bbp_write(rt2x00dev, 103, 0xc0);
4200
4201 rt2800_bbp_write(rt2x00dev, 105, 0x01);
4202
4203 rt2800_bbp_write(rt2x00dev, 106, 0x35);
4204 }
4205
4206 static void rt2800_init_bbp_28xx(struct rt2x00_dev *rt2x00dev)
4207 {
4208 rt2800_bbp_write(rt2x00dev, 65, 0x2c);
4209 rt2800_bbp_write(rt2x00dev, 66, 0x38);
4210
4211 if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C)) {
4212 rt2800_bbp_write(rt2x00dev, 69, 0x16);
4213 rt2800_bbp_write(rt2x00dev, 73, 0x12);
4214 } else {
4215 rt2800_bbp_write(rt2x00dev, 69, 0x12);
4216 rt2800_bbp_write(rt2x00dev, 73, 0x10);
4217 }
4218
4219 rt2800_bbp_write(rt2x00dev, 70, 0x0a);
4220
4221 rt2800_bbp_write(rt2x00dev, 81, 0x37);
4222
4223 rt2800_bbp_write(rt2x00dev, 82, 0x62);
4224
4225 rt2800_bbp_write(rt2x00dev, 83, 0x6a);
4226
4227 if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860D))
4228 rt2800_bbp_write(rt2x00dev, 84, 0x19);
4229 else
4230 rt2800_bbp_write(rt2x00dev, 84, 0x99);
4231
4232 rt2800_bbp_write(rt2x00dev, 86, 0x00);
4233
4234 rt2800_bbp_write(rt2x00dev, 91, 0x04);
4235
4236 rt2800_bbp_write(rt2x00dev, 92, 0x00);
4237
4238 rt2800_bbp_write(rt2x00dev, 103, 0x00);
4239
4240 rt2800_bbp_write(rt2x00dev, 105, 0x05);
4241
4242 rt2800_bbp_write(rt2x00dev, 106, 0x35);
4243 }
4244
4245 static void rt2800_init_bbp_30xx(struct rt2x00_dev *rt2x00dev)
4246 {
4247 rt2800_bbp_write(rt2x00dev, 65, 0x2c);
4248 rt2800_bbp_write(rt2x00dev, 66, 0x38);
4249
4250 rt2800_bbp_write(rt2x00dev, 69, 0x12);
4251 rt2800_bbp_write(rt2x00dev, 73, 0x10);
4252
4253 rt2800_bbp_write(rt2x00dev, 70, 0x0a);
4254
4255 rt2800_bbp_write(rt2x00dev, 79, 0x13);
4256 rt2800_bbp_write(rt2x00dev, 80, 0x05);
4257 rt2800_bbp_write(rt2x00dev, 81, 0x33);
4258
4259 rt2800_bbp_write(rt2x00dev, 82, 0x62);
4260
4261 rt2800_bbp_write(rt2x00dev, 83, 0x6a);
4262
4263 rt2800_bbp_write(rt2x00dev, 84, 0x99);
4264
4265 rt2800_bbp_write(rt2x00dev, 86, 0x00);
4266
4267 rt2800_bbp_write(rt2x00dev, 91, 0x04);
4268
4269 rt2800_bbp_write(rt2x00dev, 92, 0x00);
4270
4271 if (rt2x00_rt_rev_gte(rt2x00dev, RT3070, REV_RT3070F) ||
4272 rt2x00_rt_rev_gte(rt2x00dev, RT3071, REV_RT3071E) ||
4273 rt2x00_rt_rev_gte(rt2x00dev, RT3090, REV_RT3090E))
4274 rt2800_bbp_write(rt2x00dev, 103, 0xc0);
4275 else
4276 rt2800_bbp_write(rt2x00dev, 103, 0x00);
4277
4278 rt2800_bbp_write(rt2x00dev, 105, 0x05);
4279
4280 rt2800_bbp_write(rt2x00dev, 106, 0x35);
4281
4282 if (rt2x00_rt(rt2x00dev, RT3071) ||
4283 rt2x00_rt(rt2x00dev, RT3090))
4284 rt2800_disable_unused_dac_adc(rt2x00dev);
4285 }
4286
4287 static void rt2800_init_bbp_3290(struct rt2x00_dev *rt2x00dev)
4288 {
4289 u8 value;
4290
4291 rt2800_bbp4_mac_if_ctrl(rt2x00dev);
4292
4293 rt2800_bbp_write(rt2x00dev, 31, 0x08);
4294
4295 rt2800_bbp_write(rt2x00dev, 65, 0x2c);
4296 rt2800_bbp_write(rt2x00dev, 66, 0x38);
4297
4298 rt2800_bbp_write(rt2x00dev, 68, 0x0b);
4299
4300 rt2800_bbp_write(rt2x00dev, 69, 0x12);
4301 rt2800_bbp_write(rt2x00dev, 73, 0x13);
4302 rt2800_bbp_write(rt2x00dev, 75, 0x46);
4303 rt2800_bbp_write(rt2x00dev, 76, 0x28);
4304
4305 rt2800_bbp_write(rt2x00dev, 77, 0x58);
4306
4307 rt2800_bbp_write(rt2x00dev, 70, 0x0a);
4308
4309 rt2800_bbp_write(rt2x00dev, 74, 0x0b);
4310 rt2800_bbp_write(rt2x00dev, 79, 0x18);
4311 rt2800_bbp_write(rt2x00dev, 80, 0x09);
4312 rt2800_bbp_write(rt2x00dev, 81, 0x33);
4313
4314 rt2800_bbp_write(rt2x00dev, 82, 0x62);
4315
4316 rt2800_bbp_write(rt2x00dev, 83, 0x7a);
4317
4318 rt2800_bbp_write(rt2x00dev, 84, 0x9a);
4319
4320 rt2800_bbp_write(rt2x00dev, 86, 0x38);
4321
4322 rt2800_bbp_write(rt2x00dev, 91, 0x04);
4323
4324 rt2800_bbp_write(rt2x00dev, 92, 0x02);
4325
4326 rt2800_bbp_write(rt2x00dev, 103, 0xc0);
4327
4328 rt2800_bbp_write(rt2x00dev, 104, 0x92);
4329
4330 rt2800_bbp_write(rt2x00dev, 105, 0x1c);
4331
4332 rt2800_bbp_write(rt2x00dev, 106, 0x03);
4333
4334 rt2800_bbp_write(rt2x00dev, 128, 0x12);
4335
4336 rt2800_bbp_write(rt2x00dev, 67, 0x24);
4337 rt2800_bbp_write(rt2x00dev, 143, 0x04);
4338 rt2800_bbp_write(rt2x00dev, 142, 0x99);
4339 rt2800_bbp_write(rt2x00dev, 150, 0x30);
4340 rt2800_bbp_write(rt2x00dev, 151, 0x2e);
4341 rt2800_bbp_write(rt2x00dev, 152, 0x20);
4342 rt2800_bbp_write(rt2x00dev, 153, 0x34);
4343 rt2800_bbp_write(rt2x00dev, 154, 0x40);
4344 rt2800_bbp_write(rt2x00dev, 155, 0x3b);
4345 rt2800_bbp_write(rt2x00dev, 253, 0x04);
4346
4347 rt2800_bbp_read(rt2x00dev, 47, &value);
4348 rt2x00_set_field8(&value, BBP47_TSSI_ADC6, 1);
4349 rt2800_bbp_write(rt2x00dev, 47, value);
4350
4351 /* Use 5-bit ADC for Acquisition and 8-bit ADC for data */
4352 rt2800_bbp_read(rt2x00dev, 3, &value);
4353 rt2x00_set_field8(&value, BBP3_ADC_MODE_SWITCH, 1);
4354 rt2x00_set_field8(&value, BBP3_ADC_INIT_MODE, 1);
4355 rt2800_bbp_write(rt2x00dev, 3, value);
4356 }
4357
4358 static void rt2800_init_bbp_3352(struct rt2x00_dev *rt2x00dev)
4359 {
4360 rt2800_bbp_write(rt2x00dev, 3, 0x00);
4361 rt2800_bbp_write(rt2x00dev, 4, 0x50);
4362
4363 rt2800_bbp_write(rt2x00dev, 31, 0x08);
4364
4365 rt2800_bbp_write(rt2x00dev, 47, 0x48);
4366
4367 rt2800_bbp_write(rt2x00dev, 65, 0x2c);
4368 rt2800_bbp_write(rt2x00dev, 66, 0x38);
4369
4370 rt2800_bbp_write(rt2x00dev, 68, 0x0b);
4371
4372 rt2800_bbp_write(rt2x00dev, 69, 0x12);
4373 rt2800_bbp_write(rt2x00dev, 73, 0x13);
4374 rt2800_bbp_write(rt2x00dev, 75, 0x46);
4375 rt2800_bbp_write(rt2x00dev, 76, 0x28);
4376
4377 rt2800_bbp_write(rt2x00dev, 77, 0x59);
4378
4379 rt2800_bbp_write(rt2x00dev, 70, 0x0a);
4380
4381 rt2800_bbp_write(rt2x00dev, 78, 0x0e);
4382 rt2800_bbp_write(rt2x00dev, 80, 0x08);
4383 rt2800_bbp_write(rt2x00dev, 81, 0x37);
4384
4385 rt2800_bbp_write(rt2x00dev, 82, 0x62);
4386
4387 rt2800_bbp_write(rt2x00dev, 83, 0x6a);
4388
4389 rt2800_bbp_write(rt2x00dev, 84, 0x99);
4390
4391 rt2800_bbp_write(rt2x00dev, 86, 0x38);
4392
4393 rt2800_bbp_write(rt2x00dev, 88, 0x90);
4394
4395 rt2800_bbp_write(rt2x00dev, 91, 0x04);
4396
4397 rt2800_bbp_write(rt2x00dev, 92, 0x02);
4398
4399 rt2800_bbp_write(rt2x00dev, 103, 0xc0);
4400
4401 rt2800_bbp_write(rt2x00dev, 104, 0x92);
4402
4403 rt2800_bbp_write(rt2x00dev, 105, 0x34);
4404
4405 rt2800_bbp_write(rt2x00dev, 106, 0x05);
4406
4407 rt2800_bbp_write(rt2x00dev, 120, 0x50);
4408
4409 rt2800_bbp_write(rt2x00dev, 137, 0x0f);
4410
4411 rt2800_bbp_write(rt2x00dev, 163, 0xbd);
4412 /* Set ITxBF timeout to 0x9c40=1000msec */
4413 rt2800_bbp_write(rt2x00dev, 179, 0x02);
4414 rt2800_bbp_write(rt2x00dev, 180, 0x00);
4415 rt2800_bbp_write(rt2x00dev, 182, 0x40);
4416 rt2800_bbp_write(rt2x00dev, 180, 0x01);
4417 rt2800_bbp_write(rt2x00dev, 182, 0x9c);
4418 rt2800_bbp_write(rt2x00dev, 179, 0x00);
4419 /* Reprogram the inband interface to put right values in RXWI */
4420 rt2800_bbp_write(rt2x00dev, 142, 0x04);
4421 rt2800_bbp_write(rt2x00dev, 143, 0x3b);
4422 rt2800_bbp_write(rt2x00dev, 142, 0x06);
4423 rt2800_bbp_write(rt2x00dev, 143, 0xa0);
4424 rt2800_bbp_write(rt2x00dev, 142, 0x07);
4425 rt2800_bbp_write(rt2x00dev, 143, 0xa1);
4426 rt2800_bbp_write(rt2x00dev, 142, 0x08);
4427 rt2800_bbp_write(rt2x00dev, 143, 0xa2);
4428
4429 rt2800_bbp_write(rt2x00dev, 148, 0xc8);
4430 }
4431
4432 static void rt2800_init_bbp_3390(struct rt2x00_dev *rt2x00dev)
4433 {
4434 rt2800_bbp_write(rt2x00dev, 65, 0x2c);
4435 rt2800_bbp_write(rt2x00dev, 66, 0x38);
4436
4437 rt2800_bbp_write(rt2x00dev, 69, 0x12);
4438 rt2800_bbp_write(rt2x00dev, 73, 0x10);
4439
4440 rt2800_bbp_write(rt2x00dev, 70, 0x0a);
4441
4442 rt2800_bbp_write(rt2x00dev, 79, 0x13);
4443 rt2800_bbp_write(rt2x00dev, 80, 0x05);
4444 rt2800_bbp_write(rt2x00dev, 81, 0x33);
4445
4446 rt2800_bbp_write(rt2x00dev, 82, 0x62);
4447
4448 rt2800_bbp_write(rt2x00dev, 83, 0x6a);
4449
4450 rt2800_bbp_write(rt2x00dev, 84, 0x99);
4451
4452 rt2800_bbp_write(rt2x00dev, 86, 0x00);
4453
4454 rt2800_bbp_write(rt2x00dev, 91, 0x04);
4455
4456 rt2800_bbp_write(rt2x00dev, 92, 0x00);
4457
4458 if (rt2x00_rt_rev_gte(rt2x00dev, RT3390, REV_RT3390E))
4459 rt2800_bbp_write(rt2x00dev, 103, 0xc0);
4460 else
4461 rt2800_bbp_write(rt2x00dev, 103, 0x00);
4462
4463 rt2800_bbp_write(rt2x00dev, 105, 0x05);
4464
4465 rt2800_bbp_write(rt2x00dev, 106, 0x35);
4466
4467 rt2800_disable_unused_dac_adc(rt2x00dev);
4468 }
4469
4470 static void rt2800_init_bbp_3572(struct rt2x00_dev *rt2x00dev)
4471 {
4472 rt2800_bbp_write(rt2x00dev, 31, 0x08);
4473
4474 rt2800_bbp_write(rt2x00dev, 65, 0x2c);
4475 rt2800_bbp_write(rt2x00dev, 66, 0x38);
4476
4477 rt2800_bbp_write(rt2x00dev, 69, 0x12);
4478 rt2800_bbp_write(rt2x00dev, 73, 0x10);
4479
4480 rt2800_bbp_write(rt2x00dev, 70, 0x0a);
4481
4482 rt2800_bbp_write(rt2x00dev, 79, 0x13);
4483 rt2800_bbp_write(rt2x00dev, 80, 0x05);
4484 rt2800_bbp_write(rt2x00dev, 81, 0x33);
4485
4486 rt2800_bbp_write(rt2x00dev, 82, 0x62);
4487
4488 rt2800_bbp_write(rt2x00dev, 83, 0x6a);
4489
4490 rt2800_bbp_write(rt2x00dev, 84, 0x99);
4491
4492 rt2800_bbp_write(rt2x00dev, 86, 0x00);
4493
4494 rt2800_bbp_write(rt2x00dev, 91, 0x04);
4495
4496 rt2800_bbp_write(rt2x00dev, 92, 0x00);
4497
4498 rt2800_bbp_write(rt2x00dev, 103, 0xc0);
4499
4500 rt2800_bbp_write(rt2x00dev, 105, 0x05);
4501
4502 rt2800_bbp_write(rt2x00dev, 106, 0x35);
4503
4504 rt2800_disable_unused_dac_adc(rt2x00dev);
4505 }
4506
4507 static void rt2800_init_bbp_3593(struct rt2x00_dev *rt2x00dev)
4508 {
4509 rt2800_init_bbp_early(rt2x00dev);
4510
4511 rt2800_bbp_write(rt2x00dev, 79, 0x13);
4512 rt2800_bbp_write(rt2x00dev, 80, 0x05);
4513 rt2800_bbp_write(rt2x00dev, 81, 0x33);
4514 rt2800_bbp_write(rt2x00dev, 137, 0x0f);
4515
4516 rt2800_bbp_write(rt2x00dev, 84, 0x19);
4517
4518 /* Enable DC filter */
4519 if (rt2x00_rt_rev_gte(rt2x00dev, RT3593, REV_RT3593E))
4520 rt2800_bbp_write(rt2x00dev, 103, 0xc0);
4521 }
4522
4523 static void rt2800_init_bbp_53xx(struct rt2x00_dev *rt2x00dev)
4524 {
4525 int ant, div_mode;
4526 u16 eeprom;
4527 u8 value;
4528
4529 rt2800_bbp4_mac_if_ctrl(rt2x00dev);
4530
4531 rt2800_bbp_write(rt2x00dev, 31, 0x08);
4532
4533 rt2800_bbp_write(rt2x00dev, 65, 0x2c);
4534 rt2800_bbp_write(rt2x00dev, 66, 0x38);
4535
4536 rt2800_bbp_write(rt2x00dev, 68, 0x0b);
4537
4538 rt2800_bbp_write(rt2x00dev, 69, 0x12);
4539 rt2800_bbp_write(rt2x00dev, 73, 0x13);
4540 rt2800_bbp_write(rt2x00dev, 75, 0x46);
4541 rt2800_bbp_write(rt2x00dev, 76, 0x28);
4542
4543 rt2800_bbp_write(rt2x00dev, 77, 0x59);
4544
4545 rt2800_bbp_write(rt2x00dev, 70, 0x0a);
4546
4547 rt2800_bbp_write(rt2x00dev, 79, 0x13);
4548 rt2800_bbp_write(rt2x00dev, 80, 0x05);
4549 rt2800_bbp_write(rt2x00dev, 81, 0x33);
4550
4551 rt2800_bbp_write(rt2x00dev, 82, 0x62);
4552
4553 rt2800_bbp_write(rt2x00dev, 83, 0x7a);
4554
4555 rt2800_bbp_write(rt2x00dev, 84, 0x9a);
4556
4557 rt2800_bbp_write(rt2x00dev, 86, 0x38);
4558
4559 if (rt2x00_rt(rt2x00dev, RT5392))
4560 rt2800_bbp_write(rt2x00dev, 88, 0x90);
4561
4562 rt2800_bbp_write(rt2x00dev, 91, 0x04);
4563
4564 rt2800_bbp_write(rt2x00dev, 92, 0x02);
4565
4566 if (rt2x00_rt(rt2x00dev, RT5392)) {
4567 rt2800_bbp_write(rt2x00dev, 95, 0x9a);
4568 rt2800_bbp_write(rt2x00dev, 98, 0x12);
4569 }
4570
4571 rt2800_bbp_write(rt2x00dev, 103, 0xc0);
4572
4573 rt2800_bbp_write(rt2x00dev, 104, 0x92);
4574
4575 rt2800_bbp_write(rt2x00dev, 105, 0x3c);
4576
4577 if (rt2x00_rt(rt2x00dev, RT5390))
4578 rt2800_bbp_write(rt2x00dev, 106, 0x03);
4579 else if (rt2x00_rt(rt2x00dev, RT5392))
4580 rt2800_bbp_write(rt2x00dev, 106, 0x12);
4581 else
4582 WARN_ON(1);
4583
4584 rt2800_bbp_write(rt2x00dev, 128, 0x12);
4585
4586 if (rt2x00_rt(rt2x00dev, RT5392)) {
4587 rt2800_bbp_write(rt2x00dev, 134, 0xd0);
4588 rt2800_bbp_write(rt2x00dev, 135, 0xf6);
4589 }
4590
4591 rt2800_disable_unused_dac_adc(rt2x00dev);
4592
4593 rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
4594 div_mode = rt2x00_get_field16(eeprom,
4595 EEPROM_NIC_CONF1_ANT_DIVERSITY);
4596 ant = (div_mode == 3) ? 1 : 0;
4597
4598 /* check if this is a Bluetooth combo card */
4599 if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) {
4600 u32 reg;
4601
4602 rt2800_register_read(rt2x00dev, GPIO_CTRL, &reg);
4603 rt2x00_set_field32(&reg, GPIO_CTRL_DIR3, 0);
4604 rt2x00_set_field32(&reg, GPIO_CTRL_DIR6, 0);
4605 rt2x00_set_field32(&reg, GPIO_CTRL_VAL3, 0);
4606 rt2x00_set_field32(&reg, GPIO_CTRL_VAL6, 0);
4607 if (ant == 0)
4608 rt2x00_set_field32(&reg, GPIO_CTRL_VAL3, 1);
4609 else if (ant == 1)
4610 rt2x00_set_field32(&reg, GPIO_CTRL_VAL6, 1);
4611 rt2800_register_write(rt2x00dev, GPIO_CTRL, reg);
4612 }
4613
4614 /* This chip has hardware antenna diversity*/
4615 if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390R)) {
4616 rt2800_bbp_write(rt2x00dev, 150, 0); /* Disable Antenna Software OFDM */
4617 rt2800_bbp_write(rt2x00dev, 151, 0); /* Disable Antenna Software CCK */
4618 rt2800_bbp_write(rt2x00dev, 154, 0); /* Clear previously selected antenna */
4619 }
4620
4621 rt2800_bbp_read(rt2x00dev, 152, &value);
4622 if (ant == 0)
4623 rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 1);
4624 else
4625 rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 0);
4626 rt2800_bbp_write(rt2x00dev, 152, value);
4627
4628 rt2800_init_freq_calibration(rt2x00dev);
4629 }
4630
4631 static void rt2800_init_bbp_5592(struct rt2x00_dev *rt2x00dev)
4632 {
4633 int ant, div_mode;
4634 u16 eeprom;
4635 u8 value;
4636
4637 rt2800_init_bbp_early(rt2x00dev);
4638
4639 rt2800_bbp_read(rt2x00dev, 105, &value);
4640 rt2x00_set_field8(&value, BBP105_MLD,
4641 rt2x00dev->default_ant.rx_chain_num == 2);
4642 rt2800_bbp_write(rt2x00dev, 105, value);
4643
4644 rt2800_bbp4_mac_if_ctrl(rt2x00dev);
4645
4646 rt2800_bbp_write(rt2x00dev, 20, 0x06);
4647 rt2800_bbp_write(rt2x00dev, 31, 0x08);
4648 rt2800_bbp_write(rt2x00dev, 65, 0x2C);
4649 rt2800_bbp_write(rt2x00dev, 68, 0xDD);
4650 rt2800_bbp_write(rt2x00dev, 69, 0x1A);
4651 rt2800_bbp_write(rt2x00dev, 70, 0x05);
4652 rt2800_bbp_write(rt2x00dev, 73, 0x13);
4653 rt2800_bbp_write(rt2x00dev, 74, 0x0F);
4654 rt2800_bbp_write(rt2x00dev, 75, 0x4F);
4655 rt2800_bbp_write(rt2x00dev, 76, 0x28);
4656 rt2800_bbp_write(rt2x00dev, 77, 0x59);
4657 rt2800_bbp_write(rt2x00dev, 84, 0x9A);
4658 rt2800_bbp_write(rt2x00dev, 86, 0x38);
4659 rt2800_bbp_write(rt2x00dev, 88, 0x90);
4660 rt2800_bbp_write(rt2x00dev, 91, 0x04);
4661 rt2800_bbp_write(rt2x00dev, 92, 0x02);
4662 rt2800_bbp_write(rt2x00dev, 95, 0x9a);
4663 rt2800_bbp_write(rt2x00dev, 98, 0x12);
4664 rt2800_bbp_write(rt2x00dev, 103, 0xC0);
4665 rt2800_bbp_write(rt2x00dev, 104, 0x92);
4666 /* FIXME BBP105 owerwrite */
4667 rt2800_bbp_write(rt2x00dev, 105, 0x3C);
4668 rt2800_bbp_write(rt2x00dev, 106, 0x35);
4669 rt2800_bbp_write(rt2x00dev, 128, 0x12);
4670 rt2800_bbp_write(rt2x00dev, 134, 0xD0);
4671 rt2800_bbp_write(rt2x00dev, 135, 0xF6);
4672 rt2800_bbp_write(rt2x00dev, 137, 0x0F);
4673
4674 /* Initialize GLRT (Generalized Likehood Radio Test) */
4675 rt2800_init_bbp_5592_glrt(rt2x00dev);
4676
4677 rt2800_bbp4_mac_if_ctrl(rt2x00dev);
4678
4679 rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
4680 div_mode = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_ANT_DIVERSITY);
4681 ant = (div_mode == 3) ? 1 : 0;
4682 rt2800_bbp_read(rt2x00dev, 152, &value);
4683 if (ant == 0) {
4684 /* Main antenna */
4685 rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 1);
4686 } else {
4687 /* Auxiliary antenna */
4688 rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 0);
4689 }
4690 rt2800_bbp_write(rt2x00dev, 152, value);
4691
4692 if (rt2x00_rt_rev_gte(rt2x00dev, RT5592, REV_RT5592C)) {
4693 rt2800_bbp_read(rt2x00dev, 254, &value);
4694 rt2x00_set_field8(&value, BBP254_BIT7, 1);
4695 rt2800_bbp_write(rt2x00dev, 254, value);
4696 }
4697
4698 rt2800_init_freq_calibration(rt2x00dev);
4699
4700 rt2800_bbp_write(rt2x00dev, 84, 0x19);
4701 if (rt2x00_rt_rev_gte(rt2x00dev, RT5592, REV_RT5592C))
4702 rt2800_bbp_write(rt2x00dev, 103, 0xc0);
4703 }
4704
4705 static void rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
4706 {
4707 unsigned int i;
4708 u16 eeprom;
4709 u8 reg_id;
4710 u8 value;
4711
4712 if (rt2800_is_305x_soc(rt2x00dev))
4713 rt2800_init_bbp_305x_soc(rt2x00dev);
4714
4715 switch (rt2x00dev->chip.rt) {
4716 case RT2860:
4717 case RT2872:
4718 case RT2883:
4719 rt2800_init_bbp_28xx(rt2x00dev);
4720 break;
4721 case RT3070:
4722 case RT3071:
4723 case RT3090:
4724 rt2800_init_bbp_30xx(rt2x00dev);
4725 break;
4726 case RT3290:
4727 rt2800_init_bbp_3290(rt2x00dev);
4728 break;
4729 case RT3352:
4730 rt2800_init_bbp_3352(rt2x00dev);
4731 break;
4732 case RT3390:
4733 rt2800_init_bbp_3390(rt2x00dev);
4734 break;
4735 case RT3572:
4736 rt2800_init_bbp_3572(rt2x00dev);
4737 break;
4738 case RT3593:
4739 rt2800_init_bbp_3593(rt2x00dev);
4740 return;
4741 case RT5390:
4742 case RT5392:
4743 rt2800_init_bbp_53xx(rt2x00dev);
4744 break;
4745 case RT5592:
4746 rt2800_init_bbp_5592(rt2x00dev);
4747 return;
4748 }
4749
4750 for (i = 0; i < EEPROM_BBP_SIZE; i++) {
4751 rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_BBP_START, i,
4752 &eeprom);
4753
4754 if (eeprom != 0xffff && eeprom != 0x0000) {
4755 reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
4756 value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
4757 rt2800_bbp_write(rt2x00dev, reg_id, value);
4758 }
4759 }
4760 }
4761
4762 static void rt2800_led_open_drain_enable(struct rt2x00_dev *rt2x00dev)
4763 {
4764 u32 reg;
4765
4766 rt2800_register_read(rt2x00dev, OPT_14_CSR, &reg);
4767 rt2x00_set_field32(&reg, OPT_14_CSR_BIT0, 1);
4768 rt2800_register_write(rt2x00dev, OPT_14_CSR, reg);
4769 }
4770
4771 static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev, bool bw40,
4772 u8 filter_target)
4773 {
4774 unsigned int i;
4775 u8 bbp;
4776 u8 rfcsr;
4777 u8 passband;
4778 u8 stopband;
4779 u8 overtuned = 0;
4780 u8 rfcsr24 = (bw40) ? 0x27 : 0x07;
4781
4782 rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24);
4783
4784 rt2800_bbp_read(rt2x00dev, 4, &bbp);
4785 rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40);
4786 rt2800_bbp_write(rt2x00dev, 4, bbp);
4787
4788 rt2800_rfcsr_read(rt2x00dev, 31, &rfcsr);
4789 rt2x00_set_field8(&rfcsr, RFCSR31_RX_H20M, bw40);
4790 rt2800_rfcsr_write(rt2x00dev, 31, rfcsr);
4791
4792 rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr);
4793 rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
4794 rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
4795
4796 /*
4797 * Set power & frequency of passband test tone
4798 */
4799 rt2800_bbp_write(rt2x00dev, 24, 0);
4800
4801 for (i = 0; i < 100; i++) {
4802 rt2800_bbp_write(rt2x00dev, 25, 0x90);
4803 msleep(1);
4804
4805 rt2800_bbp_read(rt2x00dev, 55, &passband);
4806 if (passband)
4807 break;
4808 }
4809
4810 /*
4811 * Set power & frequency of stopband test tone
4812 */
4813 rt2800_bbp_write(rt2x00dev, 24, 0x06);
4814
4815 for (i = 0; i < 100; i++) {
4816 rt2800_bbp_write(rt2x00dev, 25, 0x90);
4817 msleep(1);
4818
4819 rt2800_bbp_read(rt2x00dev, 55, &stopband);
4820
4821 if ((passband - stopband) <= filter_target) {
4822 rfcsr24++;
4823 overtuned += ((passband - stopband) == filter_target);
4824 } else
4825 break;
4826
4827 rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24);
4828 }
4829
4830 rfcsr24 -= !!overtuned;
4831
4832 rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24);
4833 return rfcsr24;
4834 }
4835
4836 static void rt2800_rf_init_calibration(struct rt2x00_dev *rt2x00dev,
4837 const unsigned int rf_reg)
4838 {
4839 u8 rfcsr;
4840
4841 rt2800_rfcsr_read(rt2x00dev, rf_reg, &rfcsr);
4842 rt2x00_set_field8(&rfcsr, FIELD8(0x80), 1);
4843 rt2800_rfcsr_write(rt2x00dev, rf_reg, rfcsr);
4844 msleep(1);
4845 rt2x00_set_field8(&rfcsr, FIELD8(0x80), 0);
4846 rt2800_rfcsr_write(rt2x00dev, rf_reg, rfcsr);
4847 }
4848
4849 static void rt2800_rx_filter_calibration(struct rt2x00_dev *rt2x00dev)
4850 {
4851 struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
4852 u8 filter_tgt_bw20;
4853 u8 filter_tgt_bw40;
4854 u8 rfcsr, bbp;
4855
4856 /*
4857 * TODO: sync filter_tgt values with vendor driver
4858 */
4859 if (rt2x00_rt(rt2x00dev, RT3070)) {
4860 filter_tgt_bw20 = 0x16;
4861 filter_tgt_bw40 = 0x19;
4862 } else {
4863 filter_tgt_bw20 = 0x13;
4864 filter_tgt_bw40 = 0x15;
4865 }
4866
4867 drv_data->calibration_bw20 =
4868 rt2800_init_rx_filter(rt2x00dev, false, filter_tgt_bw20);
4869 drv_data->calibration_bw40 =
4870 rt2800_init_rx_filter(rt2x00dev, true, filter_tgt_bw40);
4871
4872 /*
4873 * Save BBP 25 & 26 values for later use in channel switching (for 3052)
4874 */
4875 rt2800_bbp_read(rt2x00dev, 25, &drv_data->bbp25);
4876 rt2800_bbp_read(rt2x00dev, 26, &drv_data->bbp26);
4877
4878 /*
4879 * Set back to initial state
4880 */
4881 rt2800_bbp_write(rt2x00dev, 24, 0);
4882
4883 rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr);
4884 rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
4885 rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
4886
4887 /*
4888 * Set BBP back to BW20
4889 */
4890 rt2800_bbp_read(rt2x00dev, 4, &bbp);
4891 rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
4892 rt2800_bbp_write(rt2x00dev, 4, bbp);
4893 }
4894
4895 static void rt2800_normal_mode_setup_3xxx(struct rt2x00_dev *rt2x00dev)
4896 {
4897 struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
4898 u8 min_gain, rfcsr, bbp;
4899 u16 eeprom;
4900
4901 rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr);
4902
4903 rt2x00_set_field8(&rfcsr, RFCSR17_TX_LO1_EN, 0);
4904 if (rt2x00_rt(rt2x00dev, RT3070) ||
4905 rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
4906 rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) ||
4907 rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E)) {
4908 if (!test_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags))
4909 rt2x00_set_field8(&rfcsr, RFCSR17_R, 1);
4910 }
4911
4912 min_gain = rt2x00_rt(rt2x00dev, RT3070) ? 1 : 2;
4913 if (drv_data->txmixer_gain_24g >= min_gain) {
4914 rt2x00_set_field8(&rfcsr, RFCSR17_TXMIXER_GAIN,
4915 drv_data->txmixer_gain_24g);
4916 }
4917
4918 rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
4919
4920 if (rt2x00_rt(rt2x00dev, RT3090)) {
4921 /* Turn off unused DAC1 and ADC1 to reduce power consumption */
4922 rt2800_bbp_read(rt2x00dev, 138, &bbp);
4923 rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &eeprom);
4924 if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) == 1)
4925 rt2x00_set_field8(&bbp, BBP138_RX_ADC1, 0);
4926 if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) == 1)
4927 rt2x00_set_field8(&bbp, BBP138_TX_DAC1, 1);
4928 rt2800_bbp_write(rt2x00dev, 138, bbp);
4929 }
4930
4931 if (rt2x00_rt(rt2x00dev, RT3070)) {
4932 rt2800_rfcsr_read(rt2x00dev, 27, &rfcsr);
4933 if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F))
4934 rt2x00_set_field8(&rfcsr, RFCSR27_R1, 3);
4935 else
4936 rt2x00_set_field8(&rfcsr, RFCSR27_R1, 0);
4937 rt2x00_set_field8(&rfcsr, RFCSR27_R2, 0);
4938 rt2x00_set_field8(&rfcsr, RFCSR27_R3, 0);
4939 rt2x00_set_field8(&rfcsr, RFCSR27_R4, 0);
4940 rt2800_rfcsr_write(rt2x00dev, 27, rfcsr);
4941 } else if (rt2x00_rt(rt2x00dev, RT3071) ||
4942 rt2x00_rt(rt2x00dev, RT3090) ||
4943 rt2x00_rt(rt2x00dev, RT3390)) {
4944 rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr);
4945 rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
4946 rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0);
4947 rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0);
4948 rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
4949 rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
4950 rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
4951
4952 rt2800_rfcsr_read(rt2x00dev, 15, &rfcsr);
4953 rt2x00_set_field8(&rfcsr, RFCSR15_TX_LO2_EN, 0);
4954 rt2800_rfcsr_write(rt2x00dev, 15, rfcsr);
4955
4956 rt2800_rfcsr_read(rt2x00dev, 20, &rfcsr);
4957 rt2x00_set_field8(&rfcsr, RFCSR20_RX_LO1_EN, 0);
4958 rt2800_rfcsr_write(rt2x00dev, 20, rfcsr);
4959
4960 rt2800_rfcsr_read(rt2x00dev, 21, &rfcsr);
4961 rt2x00_set_field8(&rfcsr, RFCSR21_RX_LO2_EN, 0);
4962 rt2800_rfcsr_write(rt2x00dev, 21, rfcsr);
4963 }
4964 }
4965
4966 static void rt2800_normal_mode_setup_3593(struct rt2x00_dev *rt2x00dev)
4967 {
4968 struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
4969 u8 rfcsr;
4970 u8 tx_gain;
4971
4972 rt2800_rfcsr_read(rt2x00dev, 50, &rfcsr);
4973 rt2x00_set_field8(&rfcsr, RFCSR50_TX_LO2_EN, 0);
4974 rt2800_rfcsr_write(rt2x00dev, 50, rfcsr);
4975
4976 rt2800_rfcsr_read(rt2x00dev, 51, &rfcsr);
4977 tx_gain = rt2x00_get_field8(drv_data->txmixer_gain_24g,
4978 RFCSR17_TXMIXER_GAIN);
4979 rt2x00_set_field8(&rfcsr, RFCSR51_BITS24, tx_gain);
4980 rt2800_rfcsr_write(rt2x00dev, 51, rfcsr);
4981
4982 rt2800_rfcsr_read(rt2x00dev, 38, &rfcsr);
4983 rt2x00_set_field8(&rfcsr, RFCSR38_RX_LO1_EN, 0);
4984 rt2800_rfcsr_write(rt2x00dev, 38, rfcsr);
4985
4986 rt2800_rfcsr_read(rt2x00dev, 39, &rfcsr);
4987 rt2x00_set_field8(&rfcsr, RFCSR39_RX_LO2_EN, 0);
4988 rt2800_rfcsr_write(rt2x00dev, 39, rfcsr);
4989
4990 rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr);
4991 rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
4992 rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1);
4993 rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
4994
4995 rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
4996 rt2x00_set_field8(&rfcsr, RFCSR30_RX_VCM, 2);
4997 rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
4998
4999 /* TODO: enable stream mode */
5000 }
5001
5002 static void rt2800_normal_mode_setup_5xxx(struct rt2x00_dev *rt2x00dev)
5003 {
5004 u8 reg;
5005 u16 eeprom;
5006
5007 /* Turn off unused DAC1 and ADC1 to reduce power consumption */
5008 rt2800_bbp_read(rt2x00dev, 138, &reg);
5009 rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &eeprom);
5010 if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) == 1)
5011 rt2x00_set_field8(&reg, BBP138_RX_ADC1, 0);
5012 if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) == 1)
5013 rt2x00_set_field8(&reg, BBP138_TX_DAC1, 1);
5014 rt2800_bbp_write(rt2x00dev, 138, reg);
5015
5016 rt2800_rfcsr_read(rt2x00dev, 38, &reg);
5017 rt2x00_set_field8(&reg, RFCSR38_RX_LO1_EN, 0);
5018 rt2800_rfcsr_write(rt2x00dev, 38, reg);
5019
5020 rt2800_rfcsr_read(rt2x00dev, 39, &reg);
5021 rt2x00_set_field8(&reg, RFCSR39_RX_LO2_EN, 0);
5022 rt2800_rfcsr_write(rt2x00dev, 39, reg);
5023
5024 rt2800_bbp4_mac_if_ctrl(rt2x00dev);
5025
5026 rt2800_rfcsr_read(rt2x00dev, 30, &reg);
5027 rt2x00_set_field8(&reg, RFCSR30_RX_VCM, 2);
5028 rt2800_rfcsr_write(rt2x00dev, 30, reg);
5029 }
5030
5031 static void rt2800_init_rfcsr_305x_soc(struct rt2x00_dev *rt2x00dev)
5032 {
5033 rt2800_rf_init_calibration(rt2x00dev, 30);
5034
5035 rt2800_rfcsr_write(rt2x00dev, 0, 0x50);
5036 rt2800_rfcsr_write(rt2x00dev, 1, 0x01);
5037 rt2800_rfcsr_write(rt2x00dev, 2, 0xf7);
5038 rt2800_rfcsr_write(rt2x00dev, 3, 0x75);
5039 rt2800_rfcsr_write(rt2x00dev, 4, 0x40);
5040 rt2800_rfcsr_write(rt2x00dev, 5, 0x03);
5041 rt2800_rfcsr_write(rt2x00dev, 6, 0x02);
5042 rt2800_rfcsr_write(rt2x00dev, 7, 0x50);
5043 rt2800_rfcsr_write(rt2x00dev, 8, 0x39);
5044 rt2800_rfcsr_write(rt2x00dev, 9, 0x0f);
5045 rt2800_rfcsr_write(rt2x00dev, 10, 0x60);
5046 rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
5047 rt2800_rfcsr_write(rt2x00dev, 12, 0x75);
5048 rt2800_rfcsr_write(rt2x00dev, 13, 0x75);
5049 rt2800_rfcsr_write(rt2x00dev, 14, 0x90);
5050 rt2800_rfcsr_write(rt2x00dev, 15, 0x58);
5051 rt2800_rfcsr_write(rt2x00dev, 16, 0xb3);
5052 rt2800_rfcsr_write(rt2x00dev, 17, 0x92);
5053 rt2800_rfcsr_write(rt2x00dev, 18, 0x2c);
5054 rt2800_rfcsr_write(rt2x00dev, 19, 0x02);
5055 rt2800_rfcsr_write(rt2x00dev, 20, 0xba);
5056 rt2800_rfcsr_write(rt2x00dev, 21, 0xdb);
5057 rt2800_rfcsr_write(rt2x00dev, 22, 0x00);
5058 rt2800_rfcsr_write(rt2x00dev, 23, 0x31);
5059 rt2800_rfcsr_write(rt2x00dev, 24, 0x08);
5060 rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
5061 rt2800_rfcsr_write(rt2x00dev, 26, 0x25);
5062 rt2800_rfcsr_write(rt2x00dev, 27, 0x23);
5063 rt2800_rfcsr_write(rt2x00dev, 28, 0x13);
5064 rt2800_rfcsr_write(rt2x00dev, 29, 0x83);
5065 rt2800_rfcsr_write(rt2x00dev, 30, 0x00);
5066 rt2800_rfcsr_write(rt2x00dev, 31, 0x00);
5067 }
5068
5069 static void rt2800_init_rfcsr_30xx(struct rt2x00_dev *rt2x00dev)
5070 {
5071 u8 rfcsr;
5072 u16 eeprom;
5073 u32 reg;
5074
5075 /* XXX vendor driver do this only for 3070 */
5076 rt2800_rf_init_calibration(rt2x00dev, 30);
5077
5078 rt2800_rfcsr_write(rt2x00dev, 4, 0x40);
5079 rt2800_rfcsr_write(rt2x00dev, 5, 0x03);
5080 rt2800_rfcsr_write(rt2x00dev, 6, 0x02);
5081 rt2800_rfcsr_write(rt2x00dev, 7, 0x60);
5082 rt2800_rfcsr_write(rt2x00dev, 9, 0x0f);
5083 rt2800_rfcsr_write(rt2x00dev, 10, 0x41);
5084 rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
5085 rt2800_rfcsr_write(rt2x00dev, 12, 0x7b);
5086 rt2800_rfcsr_write(rt2x00dev, 14, 0x90);
5087 rt2800_rfcsr_write(rt2x00dev, 15, 0x58);
5088 rt2800_rfcsr_write(rt2x00dev, 16, 0xb3);
5089 rt2800_rfcsr_write(rt2x00dev, 17, 0x92);
5090 rt2800_rfcsr_write(rt2x00dev, 18, 0x2c);
5091 rt2800_rfcsr_write(rt2x00dev, 19, 0x02);
5092 rt2800_rfcsr_write(rt2x00dev, 20, 0xba);
5093 rt2800_rfcsr_write(rt2x00dev, 21, 0xdb);
5094 rt2800_rfcsr_write(rt2x00dev, 24, 0x16);
5095 rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
5096 rt2800_rfcsr_write(rt2x00dev, 29, 0x1f);
5097
5098 if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) {
5099 rt2800_register_read(rt2x00dev, LDO_CFG0, &reg);
5100 rt2x00_set_field32(&reg, LDO_CFG0_BGSEL, 1);
5101 rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 3);
5102 rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
5103 } else if (rt2x00_rt(rt2x00dev, RT3071) ||
5104 rt2x00_rt(rt2x00dev, RT3090)) {
5105 rt2800_rfcsr_write(rt2x00dev, 31, 0x14);
5106
5107 rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr);
5108 rt2x00_set_field8(&rfcsr, RFCSR6_R2, 1);
5109 rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
5110
5111 rt2800_register_read(rt2x00dev, LDO_CFG0, &reg);
5112 rt2x00_set_field32(&reg, LDO_CFG0_BGSEL, 1);
5113 if (rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
5114 rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E)) {
5115 rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1,
5116 &eeprom);
5117 if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_DAC_TEST))
5118 rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 3);
5119 else
5120 rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 0);
5121 }
5122 rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
5123
5124 rt2800_register_read(rt2x00dev, GPIO_SWITCH, &reg);
5125 rt2x00_set_field32(&reg, GPIO_SWITCH_5, 0);
5126 rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
5127 }
5128
5129 rt2800_rx_filter_calibration(rt2x00dev);
5130
5131 if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F) ||
5132 rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
5133 rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E))
5134 rt2800_rfcsr_write(rt2x00dev, 27, 0x03);
5135
5136 rt2800_led_open_drain_enable(rt2x00dev);
5137 rt2800_normal_mode_setup_3xxx(rt2x00dev);
5138 }
5139
5140 static void rt2800_init_rfcsr_3290(struct rt2x00_dev *rt2x00dev)
5141 {
5142 u8 rfcsr;
5143
5144 rt2800_rf_init_calibration(rt2x00dev, 2);
5145
5146 rt2800_rfcsr_write(rt2x00dev, 1, 0x0f);
5147 rt2800_rfcsr_write(rt2x00dev, 2, 0x80);
5148 rt2800_rfcsr_write(rt2x00dev, 3, 0x08);
5149 rt2800_rfcsr_write(rt2x00dev, 4, 0x00);
5150 rt2800_rfcsr_write(rt2x00dev, 6, 0xa0);
5151 rt2800_rfcsr_write(rt2x00dev, 8, 0xf3);
5152 rt2800_rfcsr_write(rt2x00dev, 9, 0x02);
5153 rt2800_rfcsr_write(rt2x00dev, 10, 0x53);
5154 rt2800_rfcsr_write(rt2x00dev, 11, 0x4a);
5155 rt2800_rfcsr_write(rt2x00dev, 12, 0x46);
5156 rt2800_rfcsr_write(rt2x00dev, 13, 0x9f);
5157 rt2800_rfcsr_write(rt2x00dev, 18, 0x02);
5158 rt2800_rfcsr_write(rt2x00dev, 22, 0x20);
5159 rt2800_rfcsr_write(rt2x00dev, 25, 0x83);
5160 rt2800_rfcsr_write(rt2x00dev, 26, 0x82);
5161 rt2800_rfcsr_write(rt2x00dev, 27, 0x09);
5162 rt2800_rfcsr_write(rt2x00dev, 29, 0x10);
5163 rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
5164 rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
5165 rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
5166 rt2800_rfcsr_write(rt2x00dev, 33, 0x00);
5167 rt2800_rfcsr_write(rt2x00dev, 34, 0x05);
5168 rt2800_rfcsr_write(rt2x00dev, 35, 0x12);
5169 rt2800_rfcsr_write(rt2x00dev, 36, 0x00);
5170 rt2800_rfcsr_write(rt2x00dev, 38, 0x85);
5171 rt2800_rfcsr_write(rt2x00dev, 39, 0x1b);
5172 rt2800_rfcsr_write(rt2x00dev, 40, 0x0b);
5173 rt2800_rfcsr_write(rt2x00dev, 41, 0xbb);
5174 rt2800_rfcsr_write(rt2x00dev, 42, 0xd5);
5175 rt2800_rfcsr_write(rt2x00dev, 43, 0x7b);
5176 rt2800_rfcsr_write(rt2x00dev, 44, 0x0e);
5177 rt2800_rfcsr_write(rt2x00dev, 45, 0xa2);
5178 rt2800_rfcsr_write(rt2x00dev, 46, 0x73);
5179 rt2800_rfcsr_write(rt2x00dev, 47, 0x00);
5180 rt2800_rfcsr_write(rt2x00dev, 48, 0x10);
5181 rt2800_rfcsr_write(rt2x00dev, 49, 0x98);
5182 rt2800_rfcsr_write(rt2x00dev, 52, 0x38);
5183 rt2800_rfcsr_write(rt2x00dev, 53, 0x00);
5184 rt2800_rfcsr_write(rt2x00dev, 54, 0x78);
5185 rt2800_rfcsr_write(rt2x00dev, 55, 0x43);
5186 rt2800_rfcsr_write(rt2x00dev, 56, 0x02);
5187 rt2800_rfcsr_write(rt2x00dev, 57, 0x80);
5188 rt2800_rfcsr_write(rt2x00dev, 58, 0x7f);
5189 rt2800_rfcsr_write(rt2x00dev, 59, 0x09);
5190 rt2800_rfcsr_write(rt2x00dev, 60, 0x45);
5191 rt2800_rfcsr_write(rt2x00dev, 61, 0xc1);
5192
5193 rt2800_rfcsr_read(rt2x00dev, 29, &rfcsr);
5194 rt2x00_set_field8(&rfcsr, RFCSR29_RSSI_GAIN, 3);
5195 rt2800_rfcsr_write(rt2x00dev, 29, rfcsr);
5196
5197 rt2800_led_open_drain_enable(rt2x00dev);
5198 rt2800_normal_mode_setup_3xxx(rt2x00dev);
5199 }
5200
5201 static void rt2800_init_rfcsr_3352(struct rt2x00_dev *rt2x00dev)
5202 {
5203 rt2800_rf_init_calibration(rt2x00dev, 30);
5204
5205 rt2800_rfcsr_write(rt2x00dev, 0, 0xf0);
5206 rt2800_rfcsr_write(rt2x00dev, 1, 0x23);
5207 rt2800_rfcsr_write(rt2x00dev, 2, 0x50);
5208 rt2800_rfcsr_write(rt2x00dev, 3, 0x18);
5209 rt2800_rfcsr_write(rt2x00dev, 4, 0x00);
5210 rt2800_rfcsr_write(rt2x00dev, 5, 0x00);
5211 rt2800_rfcsr_write(rt2x00dev, 6, 0x33);
5212 rt2800_rfcsr_write(rt2x00dev, 7, 0x00);
5213 rt2800_rfcsr_write(rt2x00dev, 8, 0xf1);
5214 rt2800_rfcsr_write(rt2x00dev, 9, 0x02);
5215 rt2800_rfcsr_write(rt2x00dev, 10, 0xd2);
5216 rt2800_rfcsr_write(rt2x00dev, 11, 0x42);
5217 rt2800_rfcsr_write(rt2x00dev, 12, 0x1c);
5218 rt2800_rfcsr_write(rt2x00dev, 13, 0x00);
5219 rt2800_rfcsr_write(rt2x00dev, 14, 0x5a);
5220 rt2800_rfcsr_write(rt2x00dev, 15, 0x00);
5221 rt2800_rfcsr_write(rt2x00dev, 16, 0x01);
5222 rt2800_rfcsr_write(rt2x00dev, 18, 0x45);
5223 rt2800_rfcsr_write(rt2x00dev, 19, 0x02);
5224 rt2800_rfcsr_write(rt2x00dev, 20, 0x00);
5225 rt2800_rfcsr_write(rt2x00dev, 21, 0x00);
5226 rt2800_rfcsr_write(rt2x00dev, 22, 0x00);
5227 rt2800_rfcsr_write(rt2x00dev, 23, 0x00);
5228 rt2800_rfcsr_write(rt2x00dev, 24, 0x00);
5229 rt2800_rfcsr_write(rt2x00dev, 25, 0x80);
5230 rt2800_rfcsr_write(rt2x00dev, 26, 0x00);
5231 rt2800_rfcsr_write(rt2x00dev, 27, 0x03);
5232 rt2800_rfcsr_write(rt2x00dev, 28, 0x03);
5233 rt2800_rfcsr_write(rt2x00dev, 29, 0x00);
5234 rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
5235 rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
5236 rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
5237 rt2800_rfcsr_write(rt2x00dev, 33, 0x00);
5238 rt2800_rfcsr_write(rt2x00dev, 34, 0x01);
5239 rt2800_rfcsr_write(rt2x00dev, 35, 0x03);
5240 rt2800_rfcsr_write(rt2x00dev, 36, 0xbd);
5241 rt2800_rfcsr_write(rt2x00dev, 37, 0x3c);
5242 rt2800_rfcsr_write(rt2x00dev, 38, 0x5f);
5243 rt2800_rfcsr_write(rt2x00dev, 39, 0xc5);
5244 rt2800_rfcsr_write(rt2x00dev, 40, 0x33);
5245 rt2800_rfcsr_write(rt2x00dev, 41, 0x5b);
5246 rt2800_rfcsr_write(rt2x00dev, 42, 0x5b);
5247 rt2800_rfcsr_write(rt2x00dev, 43, 0xdb);
5248 rt2800_rfcsr_write(rt2x00dev, 44, 0xdb);
5249 rt2800_rfcsr_write(rt2x00dev, 45, 0xdb);
5250 rt2800_rfcsr_write(rt2x00dev, 46, 0xdd);
5251 rt2800_rfcsr_write(rt2x00dev, 47, 0x0d);
5252 rt2800_rfcsr_write(rt2x00dev, 48, 0x14);
5253 rt2800_rfcsr_write(rt2x00dev, 49, 0x00);
5254 rt2800_rfcsr_write(rt2x00dev, 50, 0x2d);
5255 rt2800_rfcsr_write(rt2x00dev, 51, 0x7f);
5256 rt2800_rfcsr_write(rt2x00dev, 52, 0x00);
5257 rt2800_rfcsr_write(rt2x00dev, 53, 0x52);
5258 rt2800_rfcsr_write(rt2x00dev, 54, 0x1b);
5259 rt2800_rfcsr_write(rt2x00dev, 55, 0x7f);
5260 rt2800_rfcsr_write(rt2x00dev, 56, 0x00);
5261 rt2800_rfcsr_write(rt2x00dev, 57, 0x52);
5262 rt2800_rfcsr_write(rt2x00dev, 58, 0x1b);
5263 rt2800_rfcsr_write(rt2x00dev, 59, 0x00);
5264 rt2800_rfcsr_write(rt2x00dev, 60, 0x00);
5265 rt2800_rfcsr_write(rt2x00dev, 61, 0x00);
5266 rt2800_rfcsr_write(rt2x00dev, 62, 0x00);
5267 rt2800_rfcsr_write(rt2x00dev, 63, 0x00);
5268
5269 rt2800_rx_filter_calibration(rt2x00dev);
5270 rt2800_led_open_drain_enable(rt2x00dev);
5271 rt2800_normal_mode_setup_3xxx(rt2x00dev);
5272 }
5273
5274 static void rt2800_init_rfcsr_3390(struct rt2x00_dev *rt2x00dev)
5275 {
5276 u32 reg;
5277
5278 rt2800_rf_init_calibration(rt2x00dev, 30);
5279
5280 rt2800_rfcsr_write(rt2x00dev, 0, 0xa0);
5281 rt2800_rfcsr_write(rt2x00dev, 1, 0xe1);
5282 rt2800_rfcsr_write(rt2x00dev, 2, 0xf1);
5283 rt2800_rfcsr_write(rt2x00dev, 3, 0x62);
5284 rt2800_rfcsr_write(rt2x00dev, 4, 0x40);
5285 rt2800_rfcsr_write(rt2x00dev, 5, 0x8b);
5286 rt2800_rfcsr_write(rt2x00dev, 6, 0x42);
5287 rt2800_rfcsr_write(rt2x00dev, 7, 0x34);
5288 rt2800_rfcsr_write(rt2x00dev, 8, 0x00);
5289 rt2800_rfcsr_write(rt2x00dev, 9, 0xc0);
5290 rt2800_rfcsr_write(rt2x00dev, 10, 0x61);
5291 rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
5292 rt2800_rfcsr_write(rt2x00dev, 12, 0x3b);
5293 rt2800_rfcsr_write(rt2x00dev, 13, 0xe0);
5294 rt2800_rfcsr_write(rt2x00dev, 14, 0x90);
5295 rt2800_rfcsr_write(rt2x00dev, 15, 0x53);
5296 rt2800_rfcsr_write(rt2x00dev, 16, 0xe0);
5297 rt2800_rfcsr_write(rt2x00dev, 17, 0x94);
5298 rt2800_rfcsr_write(rt2x00dev, 18, 0x5c);
5299 rt2800_rfcsr_write(rt2x00dev, 19, 0x4a);
5300 rt2800_rfcsr_write(rt2x00dev, 20, 0xb2);
5301 rt2800_rfcsr_write(rt2x00dev, 21, 0xf6);
5302 rt2800_rfcsr_write(rt2x00dev, 22, 0x00);
5303 rt2800_rfcsr_write(rt2x00dev, 23, 0x14);
5304 rt2800_rfcsr_write(rt2x00dev, 24, 0x08);
5305 rt2800_rfcsr_write(rt2x00dev, 25, 0x3d);
5306 rt2800_rfcsr_write(rt2x00dev, 26, 0x85);
5307 rt2800_rfcsr_write(rt2x00dev, 27, 0x00);
5308 rt2800_rfcsr_write(rt2x00dev, 28, 0x41);
5309 rt2800_rfcsr_write(rt2x00dev, 29, 0x8f);
5310 rt2800_rfcsr_write(rt2x00dev, 30, 0x20);
5311 rt2800_rfcsr_write(rt2x00dev, 31, 0x0f);
5312
5313 rt2800_register_read(rt2x00dev, GPIO_SWITCH, &reg);
5314 rt2x00_set_field32(&reg, GPIO_SWITCH_5, 0);
5315 rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
5316
5317 rt2800_rx_filter_calibration(rt2x00dev);
5318
5319 if (rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E))
5320 rt2800_rfcsr_write(rt2x00dev, 27, 0x03);
5321
5322 rt2800_led_open_drain_enable(rt2x00dev);
5323 rt2800_normal_mode_setup_3xxx(rt2x00dev);
5324 }
5325
5326 static void rt2800_init_rfcsr_3572(struct rt2x00_dev *rt2x00dev)
5327 {
5328 u8 rfcsr;
5329 u32 reg;
5330
5331 rt2800_rf_init_calibration(rt2x00dev, 30);
5332
5333 rt2800_rfcsr_write(rt2x00dev, 0, 0x70);
5334 rt2800_rfcsr_write(rt2x00dev, 1, 0x81);
5335 rt2800_rfcsr_write(rt2x00dev, 2, 0xf1);
5336 rt2800_rfcsr_write(rt2x00dev, 3, 0x02);
5337 rt2800_rfcsr_write(rt2x00dev, 4, 0x4c);
5338 rt2800_rfcsr_write(rt2x00dev, 5, 0x05);
5339 rt2800_rfcsr_write(rt2x00dev, 6, 0x4a);
5340 rt2800_rfcsr_write(rt2x00dev, 7, 0xd8);
5341 rt2800_rfcsr_write(rt2x00dev, 9, 0xc3);
5342 rt2800_rfcsr_write(rt2x00dev, 10, 0xf1);
5343 rt2800_rfcsr_write(rt2x00dev, 11, 0xb9);
5344 rt2800_rfcsr_write(rt2x00dev, 12, 0x70);
5345 rt2800_rfcsr_write(rt2x00dev, 13, 0x65);
5346 rt2800_rfcsr_write(rt2x00dev, 14, 0xa0);
5347 rt2800_rfcsr_write(rt2x00dev, 15, 0x53);
5348 rt2800_rfcsr_write(rt2x00dev, 16, 0x4c);
5349 rt2800_rfcsr_write(rt2x00dev, 17, 0x23);
5350 rt2800_rfcsr_write(rt2x00dev, 18, 0xac);
5351 rt2800_rfcsr_write(rt2x00dev, 19, 0x93);
5352 rt2800_rfcsr_write(rt2x00dev, 20, 0xb3);
5353 rt2800_rfcsr_write(rt2x00dev, 21, 0xd0);
5354 rt2800_rfcsr_write(rt2x00dev, 22, 0x00);
5355 rt2800_rfcsr_write(rt2x00dev, 23, 0x3c);
5356 rt2800_rfcsr_write(rt2x00dev, 24, 0x16);
5357 rt2800_rfcsr_write(rt2x00dev, 25, 0x15);
5358 rt2800_rfcsr_write(rt2x00dev, 26, 0x85);
5359 rt2800_rfcsr_write(rt2x00dev, 27, 0x00);
5360 rt2800_rfcsr_write(rt2x00dev, 28, 0x00);
5361 rt2800_rfcsr_write(rt2x00dev, 29, 0x9b);
5362 rt2800_rfcsr_write(rt2x00dev, 30, 0x09);
5363 rt2800_rfcsr_write(rt2x00dev, 31, 0x10);
5364
5365 rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr);
5366 rt2x00_set_field8(&rfcsr, RFCSR6_R2, 1);
5367 rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
5368
5369 rt2800_register_read(rt2x00dev, LDO_CFG0, &reg);
5370 rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 3);
5371 rt2x00_set_field32(&reg, LDO_CFG0_BGSEL, 1);
5372 rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
5373 msleep(1);
5374 rt2800_register_read(rt2x00dev, LDO_CFG0, &reg);
5375 rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 0);
5376 rt2x00_set_field32(&reg, LDO_CFG0_BGSEL, 1);
5377 rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
5378
5379 rt2800_rx_filter_calibration(rt2x00dev);
5380 rt2800_led_open_drain_enable(rt2x00dev);
5381 rt2800_normal_mode_setup_3xxx(rt2x00dev);
5382 }
5383
5384 static void rt3593_post_bbp_init(struct rt2x00_dev *rt2x00dev)
5385 {
5386 u8 bbp;
5387 bool txbf_enabled = false; /* FIXME */
5388
5389 rt2800_bbp_read(rt2x00dev, 105, &bbp);
5390 if (rt2x00dev->default_ant.rx_chain_num == 1)
5391 rt2x00_set_field8(&bbp, BBP105_MLD, 0);
5392 else
5393 rt2x00_set_field8(&bbp, BBP105_MLD, 1);
5394 rt2800_bbp_write(rt2x00dev, 105, bbp);
5395
5396 rt2800_bbp4_mac_if_ctrl(rt2x00dev);
5397
5398 rt2800_bbp_write(rt2x00dev, 92, 0x02);
5399 rt2800_bbp_write(rt2x00dev, 82, 0x82);
5400 rt2800_bbp_write(rt2x00dev, 106, 0x05);
5401 rt2800_bbp_write(rt2x00dev, 104, 0x92);
5402 rt2800_bbp_write(rt2x00dev, 88, 0x90);
5403 rt2800_bbp_write(rt2x00dev, 148, 0xc8);
5404 rt2800_bbp_write(rt2x00dev, 47, 0x48);
5405 rt2800_bbp_write(rt2x00dev, 120, 0x50);
5406
5407 if (txbf_enabled)
5408 rt2800_bbp_write(rt2x00dev, 163, 0xbd);
5409 else
5410 rt2800_bbp_write(rt2x00dev, 163, 0x9d);
5411
5412 /* SNR mapping */
5413 rt2800_bbp_write(rt2x00dev, 142, 6);
5414 rt2800_bbp_write(rt2x00dev, 143, 160);
5415 rt2800_bbp_write(rt2x00dev, 142, 7);
5416 rt2800_bbp_write(rt2x00dev, 143, 161);
5417 rt2800_bbp_write(rt2x00dev, 142, 8);
5418 rt2800_bbp_write(rt2x00dev, 143, 162);
5419
5420 /* ADC/DAC control */
5421 rt2800_bbp_write(rt2x00dev, 31, 0x08);
5422
5423 /* RX AGC energy lower bound in log2 */
5424 rt2800_bbp_write(rt2x00dev, 68, 0x0b);
5425
5426 /* FIXME: BBP 105 owerwrite? */
5427 rt2800_bbp_write(rt2x00dev, 105, 0x04);
5428 }
5429
5430 static void rt2800_init_rfcsr_3593(struct rt2x00_dev *rt2x00dev)
5431 {
5432 struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
5433 u32 reg;
5434 u8 rfcsr;
5435
5436 /* Disable GPIO #4 and #7 function for LAN PE control */
5437 rt2800_register_read(rt2x00dev, GPIO_SWITCH, &reg);
5438 rt2x00_set_field32(&reg, GPIO_SWITCH_4, 0);
5439 rt2x00_set_field32(&reg, GPIO_SWITCH_7, 0);
5440 rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
5441
5442 /* Initialize default register values */
5443 rt2800_rfcsr_write(rt2x00dev, 1, 0x03);
5444 rt2800_rfcsr_write(rt2x00dev, 3, 0x80);
5445 rt2800_rfcsr_write(rt2x00dev, 5, 0x00);
5446 rt2800_rfcsr_write(rt2x00dev, 6, 0x40);
5447 rt2800_rfcsr_write(rt2x00dev, 8, 0xf1);
5448 rt2800_rfcsr_write(rt2x00dev, 9, 0x02);
5449 rt2800_rfcsr_write(rt2x00dev, 10, 0xd3);
5450 rt2800_rfcsr_write(rt2x00dev, 11, 0x40);
5451 rt2800_rfcsr_write(rt2x00dev, 12, 0x4e);
5452 rt2800_rfcsr_write(rt2x00dev, 13, 0x12);
5453 rt2800_rfcsr_write(rt2x00dev, 18, 0x40);
5454 rt2800_rfcsr_write(rt2x00dev, 22, 0x20);
5455 rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
5456 rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
5457 rt2800_rfcsr_write(rt2x00dev, 32, 0x78);
5458 rt2800_rfcsr_write(rt2x00dev, 33, 0x3b);
5459 rt2800_rfcsr_write(rt2x00dev, 34, 0x3c);
5460 rt2800_rfcsr_write(rt2x00dev, 35, 0xe0);
5461 rt2800_rfcsr_write(rt2x00dev, 38, 0x86);
5462 rt2800_rfcsr_write(rt2x00dev, 39, 0x23);
5463 rt2800_rfcsr_write(rt2x00dev, 44, 0xd3);
5464 rt2800_rfcsr_write(rt2x00dev, 45, 0xbb);
5465 rt2800_rfcsr_write(rt2x00dev, 46, 0x60);
5466 rt2800_rfcsr_write(rt2x00dev, 49, 0x8e);
5467 rt2800_rfcsr_write(rt2x00dev, 50, 0x86);
5468 rt2800_rfcsr_write(rt2x00dev, 51, 0x75);
5469 rt2800_rfcsr_write(rt2x00dev, 52, 0x45);
5470 rt2800_rfcsr_write(rt2x00dev, 53, 0x18);
5471 rt2800_rfcsr_write(rt2x00dev, 54, 0x18);
5472 rt2800_rfcsr_write(rt2x00dev, 55, 0x18);
5473 rt2800_rfcsr_write(rt2x00dev, 56, 0xdb);
5474 rt2800_rfcsr_write(rt2x00dev, 57, 0x6e);
5475
5476 /* Initiate calibration */
5477 /* TODO: use rt2800_rf_init_calibration ? */
5478 rt2800_rfcsr_read(rt2x00dev, 2, &rfcsr);
5479 rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 1);
5480 rt2800_rfcsr_write(rt2x00dev, 2, rfcsr);
5481
5482 rt2800_adjust_freq_offset(rt2x00dev);
5483
5484 rt2800_rfcsr_read(rt2x00dev, 18, &rfcsr);
5485 rt2x00_set_field8(&rfcsr, RFCSR18_XO_TUNE_BYPASS, 1);
5486 rt2800_rfcsr_write(rt2x00dev, 18, rfcsr);
5487
5488 rt2800_register_read(rt2x00dev, LDO_CFG0, &reg);
5489 rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 3);
5490 rt2x00_set_field32(&reg, LDO_CFG0_BGSEL, 1);
5491 rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
5492 usleep_range(1000, 1500);
5493 rt2800_register_read(rt2x00dev, LDO_CFG0, &reg);
5494 rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 0);
5495 rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
5496
5497 /* Set initial values for RX filter calibration */
5498 drv_data->calibration_bw20 = 0x1f;
5499 drv_data->calibration_bw40 = 0x2f;
5500
5501 /* Save BBP 25 & 26 values for later use in channel switching */
5502 rt2800_bbp_read(rt2x00dev, 25, &drv_data->bbp25);
5503 rt2800_bbp_read(rt2x00dev, 26, &drv_data->bbp26);
5504
5505 rt2800_led_open_drain_enable(rt2x00dev);
5506 rt2800_normal_mode_setup_3593(rt2x00dev);
5507
5508 rt3593_post_bbp_init(rt2x00dev);
5509
5510 /* TODO: enable stream mode support */
5511 }
5512
5513 static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev)
5514 {
5515 rt2800_rf_init_calibration(rt2x00dev, 2);
5516
5517 rt2800_rfcsr_write(rt2x00dev, 1, 0x0f);
5518 rt2800_rfcsr_write(rt2x00dev, 2, 0x80);
5519 rt2800_rfcsr_write(rt2x00dev, 3, 0x88);
5520 rt2800_rfcsr_write(rt2x00dev, 5, 0x10);
5521 if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F))
5522 rt2800_rfcsr_write(rt2x00dev, 6, 0xe0);
5523 else
5524 rt2800_rfcsr_write(rt2x00dev, 6, 0xa0);
5525 rt2800_rfcsr_write(rt2x00dev, 7, 0x00);
5526 rt2800_rfcsr_write(rt2x00dev, 10, 0x53);
5527 rt2800_rfcsr_write(rt2x00dev, 11, 0x4a);
5528 rt2800_rfcsr_write(rt2x00dev, 12, 0xc6);
5529 rt2800_rfcsr_write(rt2x00dev, 13, 0x9f);
5530 rt2800_rfcsr_write(rt2x00dev, 14, 0x00);
5531 rt2800_rfcsr_write(rt2x00dev, 15, 0x00);
5532 rt2800_rfcsr_write(rt2x00dev, 16, 0x00);
5533 rt2800_rfcsr_write(rt2x00dev, 18, 0x03);
5534 rt2800_rfcsr_write(rt2x00dev, 19, 0x00);
5535
5536 rt2800_rfcsr_write(rt2x00dev, 20, 0x00);
5537 rt2800_rfcsr_write(rt2x00dev, 21, 0x00);
5538 rt2800_rfcsr_write(rt2x00dev, 22, 0x20);
5539 rt2800_rfcsr_write(rt2x00dev, 23, 0x00);
5540 rt2800_rfcsr_write(rt2x00dev, 24, 0x00);
5541 if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F))
5542 rt2800_rfcsr_write(rt2x00dev, 25, 0x80);
5543 else
5544 rt2800_rfcsr_write(rt2x00dev, 25, 0xc0);
5545 rt2800_rfcsr_write(rt2x00dev, 26, 0x00);
5546 rt2800_rfcsr_write(rt2x00dev, 27, 0x09);
5547 rt2800_rfcsr_write(rt2x00dev, 28, 0x00);
5548 rt2800_rfcsr_write(rt2x00dev, 29, 0x10);
5549
5550 rt2800_rfcsr_write(rt2x00dev, 30, 0x00);
5551 rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
5552 rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
5553 rt2800_rfcsr_write(rt2x00dev, 33, 0x00);
5554 rt2800_rfcsr_write(rt2x00dev, 34, 0x07);
5555 rt2800_rfcsr_write(rt2x00dev, 35, 0x12);
5556 rt2800_rfcsr_write(rt2x00dev, 36, 0x00);
5557 rt2800_rfcsr_write(rt2x00dev, 37, 0x08);
5558 rt2800_rfcsr_write(rt2x00dev, 38, 0x85);
5559 rt2800_rfcsr_write(rt2x00dev, 39, 0x1b);
5560
5561 if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F))
5562 rt2800_rfcsr_write(rt2x00dev, 40, 0x0b);
5563 else
5564 rt2800_rfcsr_write(rt2x00dev, 40, 0x4b);
5565 rt2800_rfcsr_write(rt2x00dev, 41, 0xbb);
5566 rt2800_rfcsr_write(rt2x00dev, 42, 0xd2);
5567 rt2800_rfcsr_write(rt2x00dev, 43, 0x9a);
5568 rt2800_rfcsr_write(rt2x00dev, 44, 0x0e);
5569 rt2800_rfcsr_write(rt2x00dev, 45, 0xa2);
5570 if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F))
5571 rt2800_rfcsr_write(rt2x00dev, 46, 0x73);
5572 else
5573 rt2800_rfcsr_write(rt2x00dev, 46, 0x7b);
5574 rt2800_rfcsr_write(rt2x00dev, 47, 0x00);
5575 rt2800_rfcsr_write(rt2x00dev, 48, 0x10);
5576 rt2800_rfcsr_write(rt2x00dev, 49, 0x94);
5577
5578 rt2800_rfcsr_write(rt2x00dev, 52, 0x38);
5579 if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F))
5580 rt2800_rfcsr_write(rt2x00dev, 53, 0x00);
5581 else
5582 rt2800_rfcsr_write(rt2x00dev, 53, 0x84);
5583 rt2800_rfcsr_write(rt2x00dev, 54, 0x78);
5584 rt2800_rfcsr_write(rt2x00dev, 55, 0x44);
5585 rt2800_rfcsr_write(rt2x00dev, 56, 0x22);
5586 rt2800_rfcsr_write(rt2x00dev, 57, 0x80);
5587 rt2800_rfcsr_write(rt2x00dev, 58, 0x7f);
5588 rt2800_rfcsr_write(rt2x00dev, 59, 0x63);
5589
5590 rt2800_rfcsr_write(rt2x00dev, 60, 0x45);
5591 if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F))
5592 rt2800_rfcsr_write(rt2x00dev, 61, 0xd1);
5593 else
5594 rt2800_rfcsr_write(rt2x00dev, 61, 0xdd);
5595 rt2800_rfcsr_write(rt2x00dev, 62, 0x00);
5596 rt2800_rfcsr_write(rt2x00dev, 63, 0x00);
5597
5598 rt2800_normal_mode_setup_5xxx(rt2x00dev);
5599
5600 rt2800_led_open_drain_enable(rt2x00dev);
5601 }
5602
5603 static void rt2800_init_rfcsr_5392(struct rt2x00_dev *rt2x00dev)
5604 {
5605 rt2800_rf_init_calibration(rt2x00dev, 2);
5606
5607 rt2800_rfcsr_write(rt2x00dev, 1, 0x17);
5608 rt2800_rfcsr_write(rt2x00dev, 2, 0x80);
5609 rt2800_rfcsr_write(rt2x00dev, 3, 0x88);
5610 rt2800_rfcsr_write(rt2x00dev, 5, 0x10);
5611 rt2800_rfcsr_write(rt2x00dev, 6, 0xe0);
5612 rt2800_rfcsr_write(rt2x00dev, 7, 0x00);
5613 rt2800_rfcsr_write(rt2x00dev, 10, 0x53);
5614 rt2800_rfcsr_write(rt2x00dev, 11, 0x4a);
5615 rt2800_rfcsr_write(rt2x00dev, 12, 0x46);
5616 rt2800_rfcsr_write(rt2x00dev, 13, 0x9f);
5617 rt2800_rfcsr_write(rt2x00dev, 14, 0x00);
5618 rt2800_rfcsr_write(rt2x00dev, 15, 0x00);
5619 rt2800_rfcsr_write(rt2x00dev, 16, 0x00);
5620 rt2800_rfcsr_write(rt2x00dev, 18, 0x03);
5621 rt2800_rfcsr_write(rt2x00dev, 19, 0x4d);
5622 rt2800_rfcsr_write(rt2x00dev, 20, 0x00);
5623 rt2800_rfcsr_write(rt2x00dev, 21, 0x8d);
5624 rt2800_rfcsr_write(rt2x00dev, 22, 0x20);
5625 rt2800_rfcsr_write(rt2x00dev, 23, 0x0b);
5626 rt2800_rfcsr_write(rt2x00dev, 24, 0x44);
5627 rt2800_rfcsr_write(rt2x00dev, 25, 0x80);
5628 rt2800_rfcsr_write(rt2x00dev, 26, 0x82);
5629 rt2800_rfcsr_write(rt2x00dev, 27, 0x09);
5630 rt2800_rfcsr_write(rt2x00dev, 28, 0x00);
5631 rt2800_rfcsr_write(rt2x00dev, 29, 0x10);
5632 rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
5633 rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
5634 rt2800_rfcsr_write(rt2x00dev, 32, 0x20);
5635 rt2800_rfcsr_write(rt2x00dev, 33, 0xC0);
5636 rt2800_rfcsr_write(rt2x00dev, 34, 0x07);
5637 rt2800_rfcsr_write(rt2x00dev, 35, 0x12);
5638 rt2800_rfcsr_write(rt2x00dev, 36, 0x00);
5639 rt2800_rfcsr_write(rt2x00dev, 37, 0x08);
5640 rt2800_rfcsr_write(rt2x00dev, 38, 0x89);
5641 rt2800_rfcsr_write(rt2x00dev, 39, 0x1b);
5642 rt2800_rfcsr_write(rt2x00dev, 40, 0x0f);
5643 rt2800_rfcsr_write(rt2x00dev, 41, 0xbb);
5644 rt2800_rfcsr_write(rt2x00dev, 42, 0xd5);
5645 rt2800_rfcsr_write(rt2x00dev, 43, 0x9b);
5646 rt2800_rfcsr_write(rt2x00dev, 44, 0x0e);
5647 rt2800_rfcsr_write(rt2x00dev, 45, 0xa2);
5648 rt2800_rfcsr_write(rt2x00dev, 46, 0x73);
5649 rt2800_rfcsr_write(rt2x00dev, 47, 0x0c);
5650 rt2800_rfcsr_write(rt2x00dev, 48, 0x10);
5651 rt2800_rfcsr_write(rt2x00dev, 49, 0x94);
5652 rt2800_rfcsr_write(rt2x00dev, 50, 0x94);
5653 rt2800_rfcsr_write(rt2x00dev, 51, 0x3a);
5654 rt2800_rfcsr_write(rt2x00dev, 52, 0x48);
5655 rt2800_rfcsr_write(rt2x00dev, 53, 0x44);
5656 rt2800_rfcsr_write(rt2x00dev, 54, 0x38);
5657 rt2800_rfcsr_write(rt2x00dev, 55, 0x43);
5658 rt2800_rfcsr_write(rt2x00dev, 56, 0xa1);
5659 rt2800_rfcsr_write(rt2x00dev, 57, 0x00);
5660 rt2800_rfcsr_write(rt2x00dev, 58, 0x39);
5661 rt2800_rfcsr_write(rt2x00dev, 59, 0x07);
5662 rt2800_rfcsr_write(rt2x00dev, 60, 0x45);
5663 rt2800_rfcsr_write(rt2x00dev, 61, 0x91);
5664 rt2800_rfcsr_write(rt2x00dev, 62, 0x39);
5665 rt2800_rfcsr_write(rt2x00dev, 63, 0x07);
5666
5667 rt2800_normal_mode_setup_5xxx(rt2x00dev);
5668
5669 rt2800_led_open_drain_enable(rt2x00dev);
5670 }
5671
5672 static void rt2800_init_rfcsr_5592(struct rt2x00_dev *rt2x00dev)
5673 {
5674 rt2800_rf_init_calibration(rt2x00dev, 30);
5675
5676 rt2800_rfcsr_write(rt2x00dev, 1, 0x3F);
5677 rt2800_rfcsr_write(rt2x00dev, 3, 0x08);
5678 rt2800_rfcsr_write(rt2x00dev, 3, 0x08);
5679 rt2800_rfcsr_write(rt2x00dev, 5, 0x10);
5680 rt2800_rfcsr_write(rt2x00dev, 6, 0xE4);
5681 rt2800_rfcsr_write(rt2x00dev, 7, 0x00);
5682 rt2800_rfcsr_write(rt2x00dev, 14, 0x00);
5683 rt2800_rfcsr_write(rt2x00dev, 15, 0x00);
5684 rt2800_rfcsr_write(rt2x00dev, 16, 0x00);
5685 rt2800_rfcsr_write(rt2x00dev, 18, 0x03);
5686 rt2800_rfcsr_write(rt2x00dev, 19, 0x4D);
5687 rt2800_rfcsr_write(rt2x00dev, 20, 0x10);
5688 rt2800_rfcsr_write(rt2x00dev, 21, 0x8D);
5689 rt2800_rfcsr_write(rt2x00dev, 26, 0x82);
5690 rt2800_rfcsr_write(rt2x00dev, 28, 0x00);
5691 rt2800_rfcsr_write(rt2x00dev, 29, 0x10);
5692 rt2800_rfcsr_write(rt2x00dev, 33, 0xC0);
5693 rt2800_rfcsr_write(rt2x00dev, 34, 0x07);
5694 rt2800_rfcsr_write(rt2x00dev, 35, 0x12);
5695 rt2800_rfcsr_write(rt2x00dev, 47, 0x0C);
5696 rt2800_rfcsr_write(rt2x00dev, 53, 0x22);
5697 rt2800_rfcsr_write(rt2x00dev, 63, 0x07);
5698
5699 rt2800_rfcsr_write(rt2x00dev, 2, 0x80);
5700 msleep(1);
5701
5702 rt2800_adjust_freq_offset(rt2x00dev);
5703
5704 /* Enable DC filter */
5705 if (rt2x00_rt_rev_gte(rt2x00dev, RT5592, REV_RT5592C))
5706 rt2800_bbp_write(rt2x00dev, 103, 0xc0);
5707
5708 rt2800_normal_mode_setup_5xxx(rt2x00dev);
5709
5710 if (rt2x00_rt_rev_lt(rt2x00dev, RT5592, REV_RT5592C))
5711 rt2800_rfcsr_write(rt2x00dev, 27, 0x03);
5712
5713 rt2800_led_open_drain_enable(rt2x00dev);
5714 }
5715
5716 static void rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
5717 {
5718 if (rt2800_is_305x_soc(rt2x00dev)) {
5719 rt2800_init_rfcsr_305x_soc(rt2x00dev);
5720 return;
5721 }
5722
5723 switch (rt2x00dev->chip.rt) {
5724 case RT3070:
5725 case RT3071:
5726 case RT3090:
5727 rt2800_init_rfcsr_30xx(rt2x00dev);
5728 break;
5729 case RT3290:
5730 rt2800_init_rfcsr_3290(rt2x00dev);
5731 break;
5732 case RT3352:
5733 rt2800_init_rfcsr_3352(rt2x00dev);
5734 break;
5735 case RT3390:
5736 rt2800_init_rfcsr_3390(rt2x00dev);
5737 break;
5738 case RT3572:
5739 rt2800_init_rfcsr_3572(rt2x00dev);
5740 break;
5741 case RT3593:
5742 rt2800_init_rfcsr_3593(rt2x00dev);
5743 break;
5744 case RT5390:
5745 rt2800_init_rfcsr_5390(rt2x00dev);
5746 break;
5747 case RT5392:
5748 rt2800_init_rfcsr_5392(rt2x00dev);
5749 break;
5750 case RT5592:
5751 rt2800_init_rfcsr_5592(rt2x00dev);
5752 break;
5753 }
5754 }
5755
5756 int rt2800_enable_radio(struct rt2x00_dev *rt2x00dev)
5757 {
5758 u32 reg;
5759 u16 word;
5760
5761 /*
5762 * Initialize all registers.
5763 */
5764 if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev) ||
5765 rt2800_init_registers(rt2x00dev)))
5766 return -EIO;
5767
5768 /*
5769 * Send signal to firmware during boot time.
5770 */
5771 rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
5772 rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
5773 if (rt2x00_is_usb(rt2x00dev)) {
5774 rt2800_register_write(rt2x00dev, H2M_INT_SRC, 0);
5775 rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0);
5776 }
5777 msleep(1);
5778
5779 if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev) ||
5780 rt2800_wait_bbp_ready(rt2x00dev)))
5781 return -EIO;
5782
5783 rt2800_init_bbp(rt2x00dev);
5784 rt2800_init_rfcsr(rt2x00dev);
5785
5786 if (rt2x00_is_usb(rt2x00dev) &&
5787 (rt2x00_rt(rt2x00dev, RT3070) ||
5788 rt2x00_rt(rt2x00dev, RT3071) ||
5789 rt2x00_rt(rt2x00dev, RT3572))) {
5790 udelay(200);
5791 rt2800_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0);
5792 udelay(10);
5793 }
5794
5795 /*
5796 * Enable RX.
5797 */
5798 rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
5799 rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
5800 rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 0);
5801 rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
5802
5803 udelay(50);
5804
5805 rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
5806 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1);
5807 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1);
5808 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 2);
5809 rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
5810 rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
5811
5812 rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
5813 rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
5814 rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 1);
5815 rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
5816
5817 /*
5818 * Initialize LED control
5819 */
5820 rt2800_eeprom_read(rt2x00dev, EEPROM_LED_AG_CONF, &word);
5821 rt2800_mcu_request(rt2x00dev, MCU_LED_AG_CONF, 0xff,
5822 word & 0xff, (word >> 8) & 0xff);
5823
5824 rt2800_eeprom_read(rt2x00dev, EEPROM_LED_ACT_CONF, &word);
5825 rt2800_mcu_request(rt2x00dev, MCU_LED_ACT_CONF, 0xff,
5826 word & 0xff, (word >> 8) & 0xff);
5827
5828 rt2800_eeprom_read(rt2x00dev, EEPROM_LED_POLARITY, &word);
5829 rt2800_mcu_request(rt2x00dev, MCU_LED_LED_POLARITY, 0xff,
5830 word & 0xff, (word >> 8) & 0xff);
5831
5832 return 0;
5833 }
5834 EXPORT_SYMBOL_GPL(rt2800_enable_radio);
5835
5836 void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev)
5837 {
5838 u32 reg;
5839
5840 rt2800_disable_wpdma(rt2x00dev);
5841
5842 /* Wait for DMA, ignore error */
5843 rt2800_wait_wpdma_ready(rt2x00dev);
5844
5845 rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
5846 rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 0);
5847 rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 0);
5848 rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
5849 }
5850 EXPORT_SYMBOL_GPL(rt2800_disable_radio);
5851
5852 int rt2800_efuse_detect(struct rt2x00_dev *rt2x00dev)
5853 {
5854 u32 reg;
5855 u16 efuse_ctrl_reg;
5856
5857 if (rt2x00_rt(rt2x00dev, RT3290))
5858 efuse_ctrl_reg = EFUSE_CTRL_3290;
5859 else
5860 efuse_ctrl_reg = EFUSE_CTRL;
5861
5862 rt2800_register_read(rt2x00dev, efuse_ctrl_reg, &reg);
5863 return rt2x00_get_field32(reg, EFUSE_CTRL_PRESENT);
5864 }
5865 EXPORT_SYMBOL_GPL(rt2800_efuse_detect);
5866
5867 static void rt2800_efuse_read(struct rt2x00_dev *rt2x00dev, unsigned int i)
5868 {
5869 u32 reg;
5870 u16 efuse_ctrl_reg;
5871 u16 efuse_data0_reg;
5872 u16 efuse_data1_reg;
5873 u16 efuse_data2_reg;
5874 u16 efuse_data3_reg;
5875
5876 if (rt2x00_rt(rt2x00dev, RT3290)) {
5877 efuse_ctrl_reg = EFUSE_CTRL_3290;
5878 efuse_data0_reg = EFUSE_DATA0_3290;
5879 efuse_data1_reg = EFUSE_DATA1_3290;
5880 efuse_data2_reg = EFUSE_DATA2_3290;
5881 efuse_data3_reg = EFUSE_DATA3_3290;
5882 } else {
5883 efuse_ctrl_reg = EFUSE_CTRL;
5884 efuse_data0_reg = EFUSE_DATA0;
5885 efuse_data1_reg = EFUSE_DATA1;
5886 efuse_data2_reg = EFUSE_DATA2;
5887 efuse_data3_reg = EFUSE_DATA3;
5888 }
5889 mutex_lock(&rt2x00dev->csr_mutex);
5890
5891 rt2800_register_read_lock(rt2x00dev, efuse_ctrl_reg, &reg);
5892 rt2x00_set_field32(&reg, EFUSE_CTRL_ADDRESS_IN, i);
5893 rt2x00_set_field32(&reg, EFUSE_CTRL_MODE, 0);
5894 rt2x00_set_field32(&reg, EFUSE_CTRL_KICK, 1);
5895 rt2800_register_write_lock(rt2x00dev, efuse_ctrl_reg, reg);
5896
5897 /* Wait until the EEPROM has been loaded */
5898 rt2800_regbusy_read(rt2x00dev, efuse_ctrl_reg, EFUSE_CTRL_KICK, &reg);
5899 /* Apparently the data is read from end to start */
5900 rt2800_register_read_lock(rt2x00dev, efuse_data3_reg, &reg);
5901 /* The returned value is in CPU order, but eeprom is le */
5902 *(u32 *)&rt2x00dev->eeprom[i] = cpu_to_le32(reg);
5903 rt2800_register_read_lock(rt2x00dev, efuse_data2_reg, &reg);
5904 *(u32 *)&rt2x00dev->eeprom[i + 2] = cpu_to_le32(reg);
5905 rt2800_register_read_lock(rt2x00dev, efuse_data1_reg, &reg);
5906 *(u32 *)&rt2x00dev->eeprom[i + 4] = cpu_to_le32(reg);
5907 rt2800_register_read_lock(rt2x00dev, efuse_data0_reg, &reg);
5908 *(u32 *)&rt2x00dev->eeprom[i + 6] = cpu_to_le32(reg);
5909
5910 mutex_unlock(&rt2x00dev->csr_mutex);
5911 }
5912
5913 int rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev)
5914 {
5915 unsigned int i;
5916
5917 for (i = 0; i < EEPROM_SIZE / sizeof(u16); i += 8)
5918 rt2800_efuse_read(rt2x00dev, i);
5919
5920 return 0;
5921 }
5922 EXPORT_SYMBOL_GPL(rt2800_read_eeprom_efuse);
5923
5924 static int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
5925 {
5926 struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
5927 u16 word;
5928 u8 *mac;
5929 u8 default_lna_gain;
5930 int retval;
5931
5932 /*
5933 * Read the EEPROM.
5934 */
5935 retval = rt2800_read_eeprom(rt2x00dev);
5936 if (retval)
5937 return retval;
5938
5939 /*
5940 * Start validation of the data that has been read.
5941 */
5942 mac = rt2800_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
5943 if (!is_valid_ether_addr(mac)) {
5944 eth_random_addr(mac);
5945 rt2x00_eeprom_dbg(rt2x00dev, "MAC: %pM\n", mac);
5946 }
5947
5948 rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &word);
5949 if (word == 0xffff) {
5950 rt2x00_set_field16(&word, EEPROM_NIC_CONF0_RXPATH, 2);
5951 rt2x00_set_field16(&word, EEPROM_NIC_CONF0_TXPATH, 1);
5952 rt2x00_set_field16(&word, EEPROM_NIC_CONF0_RF_TYPE, RF2820);
5953 rt2800_eeprom_write(rt2x00dev, EEPROM_NIC_CONF0, word);
5954 rt2x00_eeprom_dbg(rt2x00dev, "Antenna: 0x%04x\n", word);
5955 } else if (rt2x00_rt(rt2x00dev, RT2860) ||
5956 rt2x00_rt(rt2x00dev, RT2872)) {
5957 /*
5958 * There is a max of 2 RX streams for RT28x0 series
5959 */
5960 if (rt2x00_get_field16(word, EEPROM_NIC_CONF0_RXPATH) > 2)
5961 rt2x00_set_field16(&word, EEPROM_NIC_CONF0_RXPATH, 2);
5962 rt2800_eeprom_write(rt2x00dev, EEPROM_NIC_CONF0, word);
5963 }
5964
5965 rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &word);
5966 if (word == 0xffff) {
5967 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_HW_RADIO, 0);
5968 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_EXTERNAL_TX_ALC, 0);
5969 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_EXTERNAL_LNA_2G, 0);
5970 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_EXTERNAL_LNA_5G, 0);
5971 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_CARDBUS_ACCEL, 0);
5972 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BW40M_SB_2G, 0);
5973 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BW40M_SB_5G, 0);
5974 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_WPS_PBC, 0);
5975 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BW40M_2G, 0);
5976 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BW40M_5G, 0);
5977 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BROADBAND_EXT_LNA, 0);
5978 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_ANT_DIVERSITY, 0);
5979 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_INTERNAL_TX_ALC, 0);
5980 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BT_COEXIST, 0);
5981 rt2x00_set_field16(&word, EEPROM_NIC_CONF1_DAC_TEST, 0);
5982 rt2800_eeprom_write(rt2x00dev, EEPROM_NIC_CONF1, word);
5983 rt2x00_eeprom_dbg(rt2x00dev, "NIC: 0x%04x\n", word);
5984 }
5985
5986 rt2800_eeprom_read(rt2x00dev, EEPROM_FREQ, &word);
5987 if ((word & 0x00ff) == 0x00ff) {
5988 rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
5989 rt2800_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
5990 rt2x00_eeprom_dbg(rt2x00dev, "Freq: 0x%04x\n", word);
5991 }
5992 if ((word & 0xff00) == 0xff00) {
5993 rt2x00_set_field16(&word, EEPROM_FREQ_LED_MODE,
5994 LED_MODE_TXRX_ACTIVITY);
5995 rt2x00_set_field16(&word, EEPROM_FREQ_LED_POLARITY, 0);
5996 rt2800_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
5997 rt2800_eeprom_write(rt2x00dev, EEPROM_LED_AG_CONF, 0x5555);
5998 rt2800_eeprom_write(rt2x00dev, EEPROM_LED_ACT_CONF, 0x2221);
5999 rt2800_eeprom_write(rt2x00dev, EEPROM_LED_POLARITY, 0xa9f8);
6000 rt2x00_eeprom_dbg(rt2x00dev, "Led Mode: 0x%04x\n", word);
6001 }
6002
6003 /*
6004 * During the LNA validation we are going to use
6005 * lna0 as correct value. Note that EEPROM_LNA
6006 * is never validated.
6007 */
6008 rt2800_eeprom_read(rt2x00dev, EEPROM_LNA, &word);
6009 default_lna_gain = rt2x00_get_field16(word, EEPROM_LNA_A0);
6010
6011 rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &word);
6012 if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET0)) > 10)
6013 rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET0, 0);
6014 if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET1)) > 10)
6015 rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET1, 0);
6016 rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_BG, word);
6017
6018 rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG, &word);
6019 if ((word & 0x00ff) != 0x00ff) {
6020 drv_data->txmixer_gain_24g =
6021 rt2x00_get_field16(word, EEPROM_TXMIXER_GAIN_BG_VAL);
6022 } else {
6023 drv_data->txmixer_gain_24g = 0;
6024 }
6025
6026 rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word);
6027 if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10)
6028 rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0);
6029 if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 ||
6030 rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff)
6031 rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1,
6032 default_lna_gain);
6033 rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word);
6034
6035 rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_A, &word);
6036 if ((word & 0x00ff) != 0x00ff) {
6037 drv_data->txmixer_gain_5g =
6038 rt2x00_get_field16(word, EEPROM_TXMIXER_GAIN_A_VAL);
6039 } else {
6040 drv_data->txmixer_gain_5g = 0;
6041 }
6042
6043 rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &word);
6044 if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET0)) > 10)
6045 rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET0, 0);
6046 if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET1)) > 10)
6047 rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET1, 0);
6048 rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_A, word);
6049
6050 rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word);
6051 if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10)
6052 rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0);
6053 if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 ||
6054 rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff)
6055 rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2,
6056 default_lna_gain);
6057 rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word);
6058
6059 return 0;
6060 }
6061
6062 static int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
6063 {
6064 u16 value;
6065 u16 eeprom;
6066 u16 rf;
6067
6068 /*
6069 * Read EEPROM word for configuration.
6070 */
6071 rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &eeprom);
6072
6073 /*
6074 * Identify RF chipset by EEPROM value
6075 * RT28xx/RT30xx: defined in "EEPROM_NIC_CONF0_RF_TYPE" field
6076 * RT53xx: defined in "EEPROM_CHIP_ID" field
6077 */
6078 if (rt2x00_rt(rt2x00dev, RT3290) ||
6079 rt2x00_rt(rt2x00dev, RT5390) ||
6080 rt2x00_rt(rt2x00dev, RT5392))
6081 rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID, &rf);
6082 else
6083 rf = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RF_TYPE);
6084
6085 switch (rf) {
6086 case RF2820:
6087 case RF2850:
6088 case RF2720:
6089 case RF2750:
6090 case RF3020:
6091 case RF2020:
6092 case RF3021:
6093 case RF3022:
6094 case RF3052:
6095 case RF3290:
6096 case RF3320:
6097 case RF3322:
6098 case RF5360:
6099 case RF5370:
6100 case RF5372:
6101 case RF5390:
6102 case RF5392:
6103 case RF5592:
6104 break;
6105 default:
6106 rt2x00_err(rt2x00dev, "Invalid RF chipset 0x%04x detected\n",
6107 rf);
6108 return -ENODEV;
6109 }
6110
6111 rt2x00_set_rf(rt2x00dev, rf);
6112
6113 /*
6114 * Identify default antenna configuration.
6115 */
6116 rt2x00dev->default_ant.tx_chain_num =
6117 rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH);
6118 rt2x00dev->default_ant.rx_chain_num =
6119 rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH);
6120
6121 rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
6122
6123 if (rt2x00_rt(rt2x00dev, RT3070) ||
6124 rt2x00_rt(rt2x00dev, RT3090) ||
6125 rt2x00_rt(rt2x00dev, RT3352) ||
6126 rt2x00_rt(rt2x00dev, RT3390)) {
6127 value = rt2x00_get_field16(eeprom,
6128 EEPROM_NIC_CONF1_ANT_DIVERSITY);
6129 switch (value) {
6130 case 0:
6131 case 1:
6132 case 2:
6133 rt2x00dev->default_ant.tx = ANTENNA_A;
6134 rt2x00dev->default_ant.rx = ANTENNA_A;
6135 break;
6136 case 3:
6137 rt2x00dev->default_ant.tx = ANTENNA_A;
6138 rt2x00dev->default_ant.rx = ANTENNA_B;
6139 break;
6140 }
6141 } else {
6142 rt2x00dev->default_ant.tx = ANTENNA_A;
6143 rt2x00dev->default_ant.rx = ANTENNA_A;
6144 }
6145
6146 if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390R)) {
6147 rt2x00dev->default_ant.tx = ANTENNA_HW_DIVERSITY; /* Unused */
6148 rt2x00dev->default_ant.rx = ANTENNA_HW_DIVERSITY; /* Unused */
6149 }
6150
6151 /*
6152 * Determine external LNA informations.
6153 */
6154 if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_EXTERNAL_LNA_5G))
6155 __set_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags);
6156 if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_EXTERNAL_LNA_2G))
6157 __set_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags);
6158
6159 /*
6160 * Detect if this device has an hardware controlled radio.
6161 */
6162 if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_HW_RADIO))
6163 __set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags);
6164
6165 /*
6166 * Detect if this device has Bluetooth co-existence.
6167 */
6168 if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_BT_COEXIST))
6169 __set_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags);
6170
6171 /*
6172 * Read frequency offset and RF programming sequence.
6173 */
6174 rt2800_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
6175 rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
6176
6177 /*
6178 * Store led settings, for correct led behaviour.
6179 */
6180 #ifdef CONFIG_RT2X00_LIB_LEDS
6181 rt2800_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
6182 rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
6183 rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
6184
6185 rt2x00dev->led_mcu_reg = eeprom;
6186 #endif /* CONFIG_RT2X00_LIB_LEDS */
6187
6188 /*
6189 * Check if support EIRP tx power limit feature.
6190 */
6191 rt2800_eeprom_read(rt2x00dev, EEPROM_EIRP_MAX_TX_POWER, &eeprom);
6192
6193 if (rt2x00_get_field16(eeprom, EEPROM_EIRP_MAX_TX_POWER_2GHZ) <
6194 EIRP_MAX_TX_POWER_LIMIT)
6195 __set_bit(CAPABILITY_POWER_LIMIT, &rt2x00dev->cap_flags);
6196
6197 return 0;
6198 }
6199
6200 /*
6201 * RF value list for rt28xx
6202 * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750)
6203 */
6204 static const struct rf_channel rf_vals[] = {
6205 { 1, 0x18402ecc, 0x184c0786, 0x1816b455, 0x1800510b },
6206 { 2, 0x18402ecc, 0x184c0786, 0x18168a55, 0x1800519f },
6207 { 3, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800518b },
6208 { 4, 0x18402ecc, 0x184c078a, 0x18168a55, 0x1800519f },
6209 { 5, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800518b },
6210 { 6, 0x18402ecc, 0x184c078e, 0x18168a55, 0x1800519f },
6211 { 7, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800518b },
6212 { 8, 0x18402ecc, 0x184c0792, 0x18168a55, 0x1800519f },
6213 { 9, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800518b },
6214 { 10, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800519f },
6215 { 11, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800518b },
6216 { 12, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800519f },
6217 { 13, 0x18402ecc, 0x184c079e, 0x18168a55, 0x1800518b },
6218 { 14, 0x18402ecc, 0x184c07a2, 0x18168a55, 0x18005193 },
6219
6220 /* 802.11 UNI / HyperLan 2 */
6221 { 36, 0x18402ecc, 0x184c099a, 0x18158a55, 0x180ed1a3 },
6222 { 38, 0x18402ecc, 0x184c099e, 0x18158a55, 0x180ed193 },
6223 { 40, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed183 },
6224 { 44, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed1a3 },
6225 { 46, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed18b },
6226 { 48, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed19b },
6227 { 52, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed193 },
6228 { 54, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed1a3 },
6229 { 56, 0x18402ec8, 0x184c068e, 0x18158a55, 0x180ed18b },
6230 { 60, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed183 },
6231 { 62, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed193 },
6232 { 64, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed1a3 },
6233
6234 /* 802.11 HyperLan 2 */
6235 { 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 },
6236 { 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 },
6237 { 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 },
6238 { 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 },
6239 { 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 },
6240 { 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b },
6241 { 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 },
6242 { 118, 0x18402ecc, 0x184c0a3e, 0x18178a55, 0x180ed193 },
6243 { 120, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed183 },
6244 { 124, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed193 },
6245 { 126, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed15b },
6246 { 128, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed1a3 },
6247 { 132, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed18b },
6248 { 134, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed193 },
6249 { 136, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed19b },
6250 { 140, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed183 },
6251
6252 /* 802.11 UNII */
6253 { 149, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed1a7 },
6254 { 151, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed187 },
6255 { 153, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed18f },
6256 { 157, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed19f },
6257 { 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 },
6258 { 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 },
6259 { 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 },
6260 { 167, 0x18402ec4, 0x184c03d2, 0x18179855, 0x1815531f },
6261 { 169, 0x18402ec4, 0x184c03d2, 0x18179855, 0x18155327 },
6262 { 171, 0x18402ec4, 0x184c03d6, 0x18179855, 0x18155307 },
6263 { 173, 0x18402ec4, 0x184c03d6, 0x18179855, 0x1815530f },
6264
6265 /* 802.11 Japan */
6266 { 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b },
6267 { 188, 0x15002ccc, 0x15004922, 0x1509be55, 0x150c0a13 },
6268 { 192, 0x15002ccc, 0x15004926, 0x1509be55, 0x150c0a1b },
6269 { 196, 0x15002ccc, 0x1500492a, 0x1509be55, 0x150c0a23 },
6270 { 208, 0x15002ccc, 0x1500493a, 0x1509be55, 0x150c0a13 },
6271 { 212, 0x15002ccc, 0x1500493e, 0x1509be55, 0x150c0a1b },
6272 { 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 },
6273 };
6274
6275 /*
6276 * RF value list for rt3xxx
6277 * Supports: 2.4 GHz (all) & 5.2 GHz (RF3052)
6278 */
6279 static const struct rf_channel rf_vals_3x[] = {
6280 {1, 241, 2, 2 },
6281 {2, 241, 2, 7 },
6282 {3, 242, 2, 2 },
6283 {4, 242, 2, 7 },
6284 {5, 243, 2, 2 },
6285 {6, 243, 2, 7 },
6286 {7, 244, 2, 2 },
6287 {8, 244, 2, 7 },
6288 {9, 245, 2, 2 },
6289 {10, 245, 2, 7 },
6290 {11, 246, 2, 2 },
6291 {12, 246, 2, 7 },
6292 {13, 247, 2, 2 },
6293 {14, 248, 2, 4 },
6294
6295 /* 802.11 UNI / HyperLan 2 */
6296 {36, 0x56, 0, 4},
6297 {38, 0x56, 0, 6},
6298 {40, 0x56, 0, 8},
6299 {44, 0x57, 0, 0},
6300 {46, 0x57, 0, 2},
6301 {48, 0x57, 0, 4},
6302 {52, 0x57, 0, 8},
6303 {54, 0x57, 0, 10},
6304 {56, 0x58, 0, 0},
6305 {60, 0x58, 0, 4},
6306 {62, 0x58, 0, 6},
6307 {64, 0x58, 0, 8},
6308
6309 /* 802.11 HyperLan 2 */
6310 {100, 0x5b, 0, 8},
6311 {102, 0x5b, 0, 10},
6312 {104, 0x5c, 0, 0},
6313 {108, 0x5c, 0, 4},
6314 {110, 0x5c, 0, 6},
6315 {112, 0x5c, 0, 8},
6316 {116, 0x5d, 0, 0},
6317 {118, 0x5d, 0, 2},
6318 {120, 0x5d, 0, 4},
6319 {124, 0x5d, 0, 8},
6320 {126, 0x5d, 0, 10},
6321 {128, 0x5e, 0, 0},
6322 {132, 0x5e, 0, 4},
6323 {134, 0x5e, 0, 6},
6324 {136, 0x5e, 0, 8},
6325 {140, 0x5f, 0, 0},
6326
6327 /* 802.11 UNII */
6328 {149, 0x5f, 0, 9},
6329 {151, 0x5f, 0, 11},
6330 {153, 0x60, 0, 1},
6331 {157, 0x60, 0, 5},
6332 {159, 0x60, 0, 7},
6333 {161, 0x60, 0, 9},
6334 {165, 0x61, 0, 1},
6335 {167, 0x61, 0, 3},
6336 {169, 0x61, 0, 5},
6337 {171, 0x61, 0, 7},
6338 {173, 0x61, 0, 9},
6339 };
6340
6341 static const struct rf_channel rf_vals_5592_xtal20[] = {
6342 /* Channel, N, K, mod, R */
6343 {1, 482, 4, 10, 3},
6344 {2, 483, 4, 10, 3},
6345 {3, 484, 4, 10, 3},
6346 {4, 485, 4, 10, 3},
6347 {5, 486, 4, 10, 3},
6348 {6, 487, 4, 10, 3},
6349 {7, 488, 4, 10, 3},
6350 {8, 489, 4, 10, 3},
6351 {9, 490, 4, 10, 3},
6352 {10, 491, 4, 10, 3},
6353 {11, 492, 4, 10, 3},
6354 {12, 493, 4, 10, 3},
6355 {13, 494, 4, 10, 3},
6356 {14, 496, 8, 10, 3},
6357 {36, 172, 8, 12, 1},
6358 {38, 173, 0, 12, 1},
6359 {40, 173, 4, 12, 1},
6360 {42, 173, 8, 12, 1},
6361 {44, 174, 0, 12, 1},
6362 {46, 174, 4, 12, 1},
6363 {48, 174, 8, 12, 1},
6364 {50, 175, 0, 12, 1},
6365 {52, 175, 4, 12, 1},
6366 {54, 175, 8, 12, 1},
6367 {56, 176, 0, 12, 1},
6368 {58, 176, 4, 12, 1},
6369 {60, 176, 8, 12, 1},
6370 {62, 177, 0, 12, 1},
6371 {64, 177, 4, 12, 1},
6372 {100, 183, 4, 12, 1},
6373 {102, 183, 8, 12, 1},
6374 {104, 184, 0, 12, 1},
6375 {106, 184, 4, 12, 1},
6376 {108, 184, 8, 12, 1},
6377 {110, 185, 0, 12, 1},
6378 {112, 185, 4, 12, 1},
6379 {114, 185, 8, 12, 1},
6380 {116, 186, 0, 12, 1},
6381 {118, 186, 4, 12, 1},
6382 {120, 186, 8, 12, 1},
6383 {122, 187, 0, 12, 1},
6384 {124, 187, 4, 12, 1},
6385 {126, 187, 8, 12, 1},
6386 {128, 188, 0, 12, 1},
6387 {130, 188, 4, 12, 1},
6388 {132, 188, 8, 12, 1},
6389 {134, 189, 0, 12, 1},
6390 {136, 189, 4, 12, 1},
6391 {138, 189, 8, 12, 1},
6392 {140, 190, 0, 12, 1},
6393 {149, 191, 6, 12, 1},
6394 {151, 191, 10, 12, 1},
6395 {153, 192, 2, 12, 1},
6396 {155, 192, 6, 12, 1},
6397 {157, 192, 10, 12, 1},
6398 {159, 193, 2, 12, 1},
6399 {161, 193, 6, 12, 1},
6400 {165, 194, 2, 12, 1},
6401 {184, 164, 0, 12, 1},
6402 {188, 164, 4, 12, 1},
6403 {192, 165, 8, 12, 1},
6404 {196, 166, 0, 12, 1},
6405 };
6406
6407 static const struct rf_channel rf_vals_5592_xtal40[] = {
6408 /* Channel, N, K, mod, R */
6409 {1, 241, 2, 10, 3},
6410 {2, 241, 7, 10, 3},
6411 {3, 242, 2, 10, 3},
6412 {4, 242, 7, 10, 3},
6413 {5, 243, 2, 10, 3},
6414 {6, 243, 7, 10, 3},
6415 {7, 244, 2, 10, 3},
6416 {8, 244, 7, 10, 3},
6417 {9, 245, 2, 10, 3},
6418 {10, 245, 7, 10, 3},
6419 {11, 246, 2, 10, 3},
6420 {12, 246, 7, 10, 3},
6421 {13, 247, 2, 10, 3},
6422 {14, 248, 4, 10, 3},
6423 {36, 86, 4, 12, 1},
6424 {38, 86, 6, 12, 1},
6425 {40, 86, 8, 12, 1},
6426 {42, 86, 10, 12, 1},
6427 {44, 87, 0, 12, 1},
6428 {46, 87, 2, 12, 1},
6429 {48, 87, 4, 12, 1},
6430 {50, 87, 6, 12, 1},
6431 {52, 87, 8, 12, 1},
6432 {54, 87, 10, 12, 1},
6433 {56, 88, 0, 12, 1},
6434 {58, 88, 2, 12, 1},
6435 {60, 88, 4, 12, 1},
6436 {62, 88, 6, 12, 1},
6437 {64, 88, 8, 12, 1},
6438 {100, 91, 8, 12, 1},
6439 {102, 91, 10, 12, 1},
6440 {104, 92, 0, 12, 1},
6441 {106, 92, 2, 12, 1},
6442 {108, 92, 4, 12, 1},
6443 {110, 92, 6, 12, 1},
6444 {112, 92, 8, 12, 1},
6445 {114, 92, 10, 12, 1},
6446 {116, 93, 0, 12, 1},
6447 {118, 93, 2, 12, 1},
6448 {120, 93, 4, 12, 1},
6449 {122, 93, 6, 12, 1},
6450 {124, 93, 8, 12, 1},
6451 {126, 93, 10, 12, 1},
6452 {128, 94, 0, 12, 1},
6453 {130, 94, 2, 12, 1},
6454 {132, 94, 4, 12, 1},
6455 {134, 94, 6, 12, 1},
6456 {136, 94, 8, 12, 1},
6457 {138, 94, 10, 12, 1},
6458 {140, 95, 0, 12, 1},
6459 {149, 95, 9, 12, 1},
6460 {151, 95, 11, 12, 1},
6461 {153, 96, 1, 12, 1},
6462 {155, 96, 3, 12, 1},
6463 {157, 96, 5, 12, 1},
6464 {159, 96, 7, 12, 1},
6465 {161, 96, 9, 12, 1},
6466 {165, 97, 1, 12, 1},
6467 {184, 82, 0, 12, 1},
6468 {188, 82, 4, 12, 1},
6469 {192, 82, 8, 12, 1},
6470 {196, 83, 0, 12, 1},
6471 };
6472
6473 static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
6474 {
6475 struct hw_mode_spec *spec = &rt2x00dev->spec;
6476 struct channel_info *info;
6477 char *default_power1;
6478 char *default_power2;
6479 unsigned int i;
6480 u16 eeprom;
6481 u32 reg;
6482
6483 /*
6484 * Disable powersaving as default on PCI devices.
6485 */
6486 if (rt2x00_is_pci(rt2x00dev) || rt2x00_is_soc(rt2x00dev))
6487 rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
6488
6489 /*
6490 * Initialize all hw fields.
6491 */
6492 rt2x00dev->hw->flags =
6493 IEEE80211_HW_SIGNAL_DBM |
6494 IEEE80211_HW_SUPPORTS_PS |
6495 IEEE80211_HW_PS_NULLFUNC_STACK |
6496 IEEE80211_HW_AMPDU_AGGREGATION |
6497 IEEE80211_HW_REPORTS_TX_ACK_STATUS;
6498
6499 /*
6500 * Don't set IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING for USB devices
6501 * unless we are capable of sending the buffered frames out after the
6502 * DTIM transmission using rt2x00lib_beacondone. This will send out
6503 * multicast and broadcast traffic immediately instead of buffering it
6504 * infinitly and thus dropping it after some time.
6505 */
6506 if (!rt2x00_is_usb(rt2x00dev))
6507 rt2x00dev->hw->flags |=
6508 IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
6509
6510 SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
6511 SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
6512 rt2800_eeprom_addr(rt2x00dev,
6513 EEPROM_MAC_ADDR_0));
6514
6515 /*
6516 * As rt2800 has a global fallback table we cannot specify
6517 * more then one tx rate per frame but since the hw will
6518 * try several rates (based on the fallback table) we should
6519 * initialize max_report_rates to the maximum number of rates
6520 * we are going to try. Otherwise mac80211 will truncate our
6521 * reported tx rates and the rc algortihm will end up with
6522 * incorrect data.
6523 */
6524 rt2x00dev->hw->max_rates = 1;
6525 rt2x00dev->hw->max_report_rates = 7;
6526 rt2x00dev->hw->max_rate_tries = 1;
6527
6528 rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &eeprom);
6529
6530 /*
6531 * Initialize hw_mode information.
6532 */
6533 spec->supported_bands = SUPPORT_BAND_2GHZ;
6534 spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
6535
6536 if (rt2x00_rf(rt2x00dev, RF2820) ||
6537 rt2x00_rf(rt2x00dev, RF2720)) {
6538 spec->num_channels = 14;
6539 spec->channels = rf_vals;
6540 } else if (rt2x00_rf(rt2x00dev, RF2850) ||
6541 rt2x00_rf(rt2x00dev, RF2750)) {
6542 spec->supported_bands |= SUPPORT_BAND_5GHZ;
6543 spec->num_channels = ARRAY_SIZE(rf_vals);
6544 spec->channels = rf_vals;
6545 } else if (rt2x00_rf(rt2x00dev, RF3020) ||
6546 rt2x00_rf(rt2x00dev, RF2020) ||
6547 rt2x00_rf(rt2x00dev, RF3021) ||
6548 rt2x00_rf(rt2x00dev, RF3022) ||
6549 rt2x00_rf(rt2x00dev, RF3290) ||
6550 rt2x00_rf(rt2x00dev, RF3320) ||
6551 rt2x00_rf(rt2x00dev, RF3322) ||
6552 rt2x00_rf(rt2x00dev, RF5360) ||
6553 rt2x00_rf(rt2x00dev, RF5370) ||
6554 rt2x00_rf(rt2x00dev, RF5372) ||
6555 rt2x00_rf(rt2x00dev, RF5390) ||
6556 rt2x00_rf(rt2x00dev, RF5392)) {
6557 spec->num_channels = 14;
6558 spec->channels = rf_vals_3x;
6559 } else if (rt2x00_rf(rt2x00dev, RF3052)) {
6560 spec->supported_bands |= SUPPORT_BAND_5GHZ;
6561 spec->num_channels = ARRAY_SIZE(rf_vals_3x);
6562 spec->channels = rf_vals_3x;
6563 } else if (rt2x00_rf(rt2x00dev, RF5592)) {
6564 spec->supported_bands |= SUPPORT_BAND_5GHZ;
6565
6566 rt2800_register_read(rt2x00dev, MAC_DEBUG_INDEX, &reg);
6567 if (rt2x00_get_field32(reg, MAC_DEBUG_INDEX_XTAL)) {
6568 spec->num_channels = ARRAY_SIZE(rf_vals_5592_xtal40);
6569 spec->channels = rf_vals_5592_xtal40;
6570 } else {
6571 spec->num_channels = ARRAY_SIZE(rf_vals_5592_xtal20);
6572 spec->channels = rf_vals_5592_xtal20;
6573 }
6574 }
6575
6576 if (WARN_ON_ONCE(!spec->channels))
6577 return -ENODEV;
6578
6579 /*
6580 * Initialize HT information.
6581 */
6582 if (!rt2x00_rf(rt2x00dev, RF2020))
6583 spec->ht.ht_supported = true;
6584 else
6585 spec->ht.ht_supported = false;
6586
6587 spec->ht.cap =
6588 IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
6589 IEEE80211_HT_CAP_GRN_FLD |
6590 IEEE80211_HT_CAP_SGI_20 |
6591 IEEE80211_HT_CAP_SGI_40;
6592
6593 if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) >= 2)
6594 spec->ht.cap |= IEEE80211_HT_CAP_TX_STBC;
6595
6596 spec->ht.cap |=
6597 rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) <<
6598 IEEE80211_HT_CAP_RX_STBC_SHIFT;
6599
6600 spec->ht.ampdu_factor = 3;
6601 spec->ht.ampdu_density = 4;
6602 spec->ht.mcs.tx_params =
6603 IEEE80211_HT_MCS_TX_DEFINED |
6604 IEEE80211_HT_MCS_TX_RX_DIFF |
6605 ((rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) - 1) <<
6606 IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
6607
6608 switch (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH)) {
6609 case 3:
6610 spec->ht.mcs.rx_mask[2] = 0xff;
6611 case 2:
6612 spec->ht.mcs.rx_mask[1] = 0xff;
6613 case 1:
6614 spec->ht.mcs.rx_mask[0] = 0xff;
6615 spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */
6616 break;
6617 }
6618
6619 /*
6620 * Create channel information array
6621 */
6622 info = kcalloc(spec->num_channels, sizeof(*info), GFP_KERNEL);
6623 if (!info)
6624 return -ENOMEM;
6625
6626 spec->channels_info = info;
6627
6628 default_power1 = rt2800_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1);
6629 default_power2 = rt2800_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2);
6630
6631 for (i = 0; i < 14; i++) {
6632 info[i].default_power1 = default_power1[i];
6633 info[i].default_power2 = default_power2[i];
6634 }
6635
6636 if (spec->num_channels > 14) {
6637 default_power1 = rt2800_eeprom_addr(rt2x00dev,
6638 EEPROM_TXPOWER_A1);
6639 default_power2 = rt2800_eeprom_addr(rt2x00dev,
6640 EEPROM_TXPOWER_A2);
6641
6642 for (i = 14; i < spec->num_channels; i++) {
6643 info[i].default_power1 = default_power1[i - 14];
6644 info[i].default_power2 = default_power2[i - 14];
6645 }
6646 }
6647
6648 switch (rt2x00dev->chip.rf) {
6649 case RF2020:
6650 case RF3020:
6651 case RF3021:
6652 case RF3022:
6653 case RF3320:
6654 case RF3052:
6655 case RF3290:
6656 case RF5360:
6657 case RF5370:
6658 case RF5372:
6659 case RF5390:
6660 case RF5392:
6661 __set_bit(CAPABILITY_VCO_RECALIBRATION, &rt2x00dev->cap_flags);
6662 break;
6663 }
6664
6665 return 0;
6666 }
6667
6668 static int rt2800_probe_rt(struct rt2x00_dev *rt2x00dev)
6669 {
6670 u32 reg;
6671 u32 rt;
6672 u32 rev;
6673
6674 if (rt2x00_rt(rt2x00dev, RT3290))
6675 rt2800_register_read(rt2x00dev, MAC_CSR0_3290, &reg);
6676 else
6677 rt2800_register_read(rt2x00dev, MAC_CSR0, &reg);
6678
6679 rt = rt2x00_get_field32(reg, MAC_CSR0_CHIPSET);
6680 rev = rt2x00_get_field32(reg, MAC_CSR0_REVISION);
6681
6682 switch (rt) {
6683 case RT2860:
6684 case RT2872:
6685 case RT2883:
6686 case RT3070:
6687 case RT3071:
6688 case RT3090:
6689 case RT3290:
6690 case RT3352:
6691 case RT3390:
6692 case RT3572:
6693 case RT5390:
6694 case RT5392:
6695 case RT5592:
6696 break;
6697 default:
6698 rt2x00_err(rt2x00dev, "Invalid RT chipset 0x%04x, rev %04x detected\n",
6699 rt, rev);
6700 return -ENODEV;
6701 }
6702
6703 rt2x00_set_rt(rt2x00dev, rt, rev);
6704
6705 return 0;
6706 }
6707
6708 int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev)
6709 {
6710 int retval;
6711 u32 reg;
6712
6713 retval = rt2800_probe_rt(rt2x00dev);
6714 if (retval)
6715 return retval;
6716
6717 /*
6718 * Allocate eeprom data.
6719 */
6720 retval = rt2800_validate_eeprom(rt2x00dev);
6721 if (retval)
6722 return retval;
6723
6724 retval = rt2800_init_eeprom(rt2x00dev);
6725 if (retval)
6726 return retval;
6727
6728 /*
6729 * Enable rfkill polling by setting GPIO direction of the
6730 * rfkill switch GPIO pin correctly.
6731 */
6732 rt2800_register_read(rt2x00dev, GPIO_CTRL, &reg);
6733 rt2x00_set_field32(&reg, GPIO_CTRL_DIR2, 1);
6734 rt2800_register_write(rt2x00dev, GPIO_CTRL, reg);
6735
6736 /*
6737 * Initialize hw specifications.
6738 */
6739 retval = rt2800_probe_hw_mode(rt2x00dev);
6740 if (retval)
6741 return retval;
6742
6743 /*
6744 * Set device capabilities.
6745 */
6746 __set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags);
6747 __set_bit(CAPABILITY_CONTROL_FILTER_PSPOLL, &rt2x00dev->cap_flags);
6748 if (!rt2x00_is_usb(rt2x00dev))
6749 __set_bit(CAPABILITY_PRE_TBTT_INTERRUPT, &rt2x00dev->cap_flags);
6750
6751 /*
6752 * Set device requirements.
6753 */
6754 if (!rt2x00_is_soc(rt2x00dev))
6755 __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags);
6756 __set_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags);
6757 __set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags);
6758 if (!rt2800_hwcrypt_disabled(rt2x00dev))
6759 __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags);
6760 __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
6761 __set_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags);
6762 if (rt2x00_is_usb(rt2x00dev))
6763 __set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags);
6764 else {
6765 __set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags);
6766 __set_bit(REQUIRE_TASKLET_CONTEXT, &rt2x00dev->cap_flags);
6767 }
6768
6769 /*
6770 * Set the rssi offset.
6771 */
6772 rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
6773
6774 return 0;
6775 }
6776 EXPORT_SYMBOL_GPL(rt2800_probe_hw);
6777
6778 /*
6779 * IEEE80211 stack callback functions.
6780 */
6781 void rt2800_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx, u32 *iv32,
6782 u16 *iv16)
6783 {
6784 struct rt2x00_dev *rt2x00dev = hw->priv;
6785 struct mac_iveiv_entry iveiv_entry;
6786 u32 offset;
6787
6788 offset = MAC_IVEIV_ENTRY(hw_key_idx);
6789 rt2800_register_multiread(rt2x00dev, offset,
6790 &iveiv_entry, sizeof(iveiv_entry));
6791
6792 memcpy(iv16, &iveiv_entry.iv[0], sizeof(*iv16));
6793 memcpy(iv32, &iveiv_entry.iv[4], sizeof(*iv32));
6794 }
6795 EXPORT_SYMBOL_GPL(rt2800_get_tkip_seq);
6796
6797 int rt2800_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
6798 {
6799 struct rt2x00_dev *rt2x00dev = hw->priv;
6800 u32 reg;
6801 bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD);
6802
6803 rt2800_register_read(rt2x00dev, TX_RTS_CFG, &reg);
6804 rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_THRES, value);
6805 rt2800_register_write(rt2x00dev, TX_RTS_CFG, reg);
6806
6807 rt2800_register_read(rt2x00dev, CCK_PROT_CFG, &reg);
6808 rt2x00_set_field32(&reg, CCK_PROT_CFG_RTS_TH_EN, enabled);
6809 rt2800_register_write(rt2x00dev, CCK_PROT_CFG, reg);
6810
6811 rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
6812 rt2x00_set_field32(&reg, OFDM_PROT_CFG_RTS_TH_EN, enabled);
6813 rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
6814
6815 rt2800_register_read(rt2x00dev, MM20_PROT_CFG, &reg);
6816 rt2x00_set_field32(&reg, MM20_PROT_CFG_RTS_TH_EN, enabled);
6817 rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg);
6818
6819 rt2800_register_read(rt2x00dev, MM40_PROT_CFG, &reg);
6820 rt2x00_set_field32(&reg, MM40_PROT_CFG_RTS_TH_EN, enabled);
6821 rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg);
6822
6823 rt2800_register_read(rt2x00dev, GF20_PROT_CFG, &reg);
6824 rt2x00_set_field32(&reg, GF20_PROT_CFG_RTS_TH_EN, enabled);
6825 rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg);
6826
6827 rt2800_register_read(rt2x00dev, GF40_PROT_CFG, &reg);
6828 rt2x00_set_field32(&reg, GF40_PROT_CFG_RTS_TH_EN, enabled);
6829 rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg);
6830
6831 return 0;
6832 }
6833 EXPORT_SYMBOL_GPL(rt2800_set_rts_threshold);
6834
6835 int rt2800_conf_tx(struct ieee80211_hw *hw,
6836 struct ieee80211_vif *vif, u16 queue_idx,
6837 const struct ieee80211_tx_queue_params *params)
6838 {
6839 struct rt2x00_dev *rt2x00dev = hw->priv;
6840 struct data_queue *queue;
6841 struct rt2x00_field32 field;
6842 int retval;
6843 u32 reg;
6844 u32 offset;
6845
6846 /*
6847 * First pass the configuration through rt2x00lib, that will
6848 * update the queue settings and validate the input. After that
6849 * we are free to update the registers based on the value
6850 * in the queue parameter.
6851 */
6852 retval = rt2x00mac_conf_tx(hw, vif, queue_idx, params);
6853 if (retval)
6854 return retval;
6855
6856 /*
6857 * We only need to perform additional register initialization
6858 * for WMM queues/
6859 */
6860 if (queue_idx >= 4)
6861 return 0;
6862
6863 queue = rt2x00queue_get_tx_queue(rt2x00dev, queue_idx);
6864
6865 /* Update WMM TXOP register */
6866 offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2)));
6867 field.bit_offset = (queue_idx & 1) * 16;
6868 field.bit_mask = 0xffff << field.bit_offset;
6869
6870 rt2800_register_read(rt2x00dev, offset, &reg);
6871 rt2x00_set_field32(&reg, field, queue->txop);
6872 rt2800_register_write(rt2x00dev, offset, reg);
6873
6874 /* Update WMM registers */
6875 field.bit_offset = queue_idx * 4;
6876 field.bit_mask = 0xf << field.bit_offset;
6877
6878 rt2800_register_read(rt2x00dev, WMM_AIFSN_CFG, &reg);
6879 rt2x00_set_field32(&reg, field, queue->aifs);
6880 rt2800_register_write(rt2x00dev, WMM_AIFSN_CFG, reg);
6881
6882 rt2800_register_read(rt2x00dev, WMM_CWMIN_CFG, &reg);
6883 rt2x00_set_field32(&reg, field, queue->cw_min);
6884 rt2800_register_write(rt2x00dev, WMM_CWMIN_CFG, reg);
6885
6886 rt2800_register_read(rt2x00dev, WMM_CWMAX_CFG, &reg);
6887 rt2x00_set_field32(&reg, field, queue->cw_max);
6888 rt2800_register_write(rt2x00dev, WMM_CWMAX_CFG, reg);
6889
6890 /* Update EDCA registers */
6891 offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx);
6892
6893 rt2800_register_read(rt2x00dev, offset, &reg);
6894 rt2x00_set_field32(&reg, EDCA_AC0_CFG_TX_OP, queue->txop);
6895 rt2x00_set_field32(&reg, EDCA_AC0_CFG_AIFSN, queue->aifs);
6896 rt2x00_set_field32(&reg, EDCA_AC0_CFG_CWMIN, queue->cw_min);
6897 rt2x00_set_field32(&reg, EDCA_AC0_CFG_CWMAX, queue->cw_max);
6898 rt2800_register_write(rt2x00dev, offset, reg);
6899
6900 return 0;
6901 }
6902 EXPORT_SYMBOL_GPL(rt2800_conf_tx);
6903
6904 u64 rt2800_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
6905 {
6906 struct rt2x00_dev *rt2x00dev = hw->priv;
6907 u64 tsf;
6908 u32 reg;
6909
6910 rt2800_register_read(rt2x00dev, TSF_TIMER_DW1, &reg);
6911 tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32;
6912 rt2800_register_read(rt2x00dev, TSF_TIMER_DW0, &reg);
6913 tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD);
6914
6915 return tsf;
6916 }
6917 EXPORT_SYMBOL_GPL(rt2800_get_tsf);
6918
6919 int rt2800_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
6920 enum ieee80211_ampdu_mlme_action action,
6921 struct ieee80211_sta *sta, u16 tid, u16 *ssn,
6922 u8 buf_size)
6923 {
6924 struct rt2x00_sta *sta_priv = (struct rt2x00_sta *)sta->drv_priv;
6925 int ret = 0;
6926
6927 /*
6928 * Don't allow aggregation for stations the hardware isn't aware
6929 * of because tx status reports for frames to an unknown station
6930 * always contain wcid=255 and thus we can't distinguish between
6931 * multiple stations which leads to unwanted situations when the
6932 * hw reorders frames due to aggregation.
6933 */
6934 if (sta_priv->wcid < 0)
6935 return 1;
6936
6937 switch (action) {
6938 case IEEE80211_AMPDU_RX_START:
6939 case IEEE80211_AMPDU_RX_STOP:
6940 /*
6941 * The hw itself takes care of setting up BlockAck mechanisms.
6942 * So, we only have to allow mac80211 to nagotiate a BlockAck
6943 * agreement. Once that is done, the hw will BlockAck incoming
6944 * AMPDUs without further setup.
6945 */
6946 break;
6947 case IEEE80211_AMPDU_TX_START:
6948 ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
6949 break;
6950 case IEEE80211_AMPDU_TX_STOP_CONT:
6951 case IEEE80211_AMPDU_TX_STOP_FLUSH:
6952 case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
6953 ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
6954 break;
6955 case IEEE80211_AMPDU_TX_OPERATIONAL:
6956 break;
6957 default:
6958 rt2x00_warn((struct rt2x00_dev *)hw->priv,
6959 "Unknown AMPDU action\n");
6960 }
6961
6962 return ret;
6963 }
6964 EXPORT_SYMBOL_GPL(rt2800_ampdu_action);
6965
6966 int rt2800_get_survey(struct ieee80211_hw *hw, int idx,
6967 struct survey_info *survey)
6968 {
6969 struct rt2x00_dev *rt2x00dev = hw->priv;
6970 struct ieee80211_conf *conf = &hw->conf;
6971 u32 idle, busy, busy_ext;
6972
6973 if (idx != 0)
6974 return -ENOENT;
6975
6976 survey->channel = conf->chandef.chan;
6977
6978 rt2800_register_read(rt2x00dev, CH_IDLE_STA, &idle);
6979 rt2800_register_read(rt2x00dev, CH_BUSY_STA, &busy);
6980 rt2800_register_read(rt2x00dev, CH_BUSY_STA_SEC, &busy_ext);
6981
6982 if (idle || busy) {
6983 survey->filled = SURVEY_INFO_CHANNEL_TIME |
6984 SURVEY_INFO_CHANNEL_TIME_BUSY |
6985 SURVEY_INFO_CHANNEL_TIME_EXT_BUSY;
6986
6987 survey->channel_time = (idle + busy) / 1000;
6988 survey->channel_time_busy = busy / 1000;
6989 survey->channel_time_ext_busy = busy_ext / 1000;
6990 }
6991
6992 if (!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL))
6993 survey->filled |= SURVEY_INFO_IN_USE;
6994
6995 return 0;
6996
6997 }
6998 EXPORT_SYMBOL_GPL(rt2800_get_survey);
6999
7000 MODULE_AUTHOR(DRV_PROJECT ", Bartlomiej Zolnierkiewicz");
7001 MODULE_VERSION(DRV_VERSION);
7002 MODULE_DESCRIPTION("Ralink RT2800 library");
7003 MODULE_LICENSE("GPL");
Linux kernel - Deliverables
This page took 0.22568 seconds and 6 git commands to generate.