2 Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
23 Abstract: rt73usb device specific routines.
24 Supported chipsets: rt2571W & rt2671.
27 #include <linux/crc-itu-t.h>
28 #include <linux/delay.h>
29 #include <linux/etherdevice.h>
30 #include <linux/init.h>
31 #include <linux/kernel.h>
32 #include <linux/module.h>
33 #include <linux/usb.h>
36 #include "rt2x00usb.h"
40 * Allow hardware encryption to be disabled.
42 static int modparam_nohwcrypt
= 0;
43 module_param_named(nohwcrypt
, modparam_nohwcrypt
, bool, S_IRUGO
);
44 MODULE_PARM_DESC(nohwcrypt
, "Disable hardware encryption.");
48 * All access to the CSR registers will go through the methods
49 * rt73usb_register_read and rt73usb_register_write.
50 * BBP and RF register require indirect register access,
51 * and use the CSR registers BBPCSR and RFCSR to achieve this.
52 * These indirect registers work with busy bits,
53 * and we will try maximal REGISTER_BUSY_COUNT times to access
54 * the register while taking a REGISTER_BUSY_DELAY us delay
55 * between each attampt. When the busy bit is still set at that time,
56 * the access attempt is considered to have failed,
57 * and we will print an error.
58 * The _lock versions must be used if you already hold the usb_cache_mutex
60 static inline void rt73usb_register_read(struct rt2x00_dev
*rt2x00dev
,
61 const unsigned int offset
, u32
*value
)
64 rt2x00usb_vendor_request_buff(rt2x00dev
, USB_MULTI_READ
,
65 USB_VENDOR_REQUEST_IN
, offset
,
66 ®
, sizeof(u32
), REGISTER_TIMEOUT
);
67 *value
= le32_to_cpu(reg
);
70 static inline void rt73usb_register_read_lock(struct rt2x00_dev
*rt2x00dev
,
71 const unsigned int offset
, u32
*value
)
74 rt2x00usb_vendor_req_buff_lock(rt2x00dev
, USB_MULTI_READ
,
75 USB_VENDOR_REQUEST_IN
, offset
,
76 ®
, sizeof(u32
), REGISTER_TIMEOUT
);
77 *value
= le32_to_cpu(reg
);
80 static inline void rt73usb_register_multiread(struct rt2x00_dev
*rt2x00dev
,
81 const unsigned int offset
,
82 void *value
, const u32 length
)
84 rt2x00usb_vendor_request_buff(rt2x00dev
, USB_MULTI_READ
,
85 USB_VENDOR_REQUEST_IN
, offset
,
87 REGISTER_TIMEOUT32(length
));
90 static inline void rt73usb_register_write(struct rt2x00_dev
*rt2x00dev
,
91 const unsigned int offset
, u32 value
)
93 __le32 reg
= cpu_to_le32(value
);
94 rt2x00usb_vendor_request_buff(rt2x00dev
, USB_MULTI_WRITE
,
95 USB_VENDOR_REQUEST_OUT
, offset
,
96 ®
, sizeof(u32
), REGISTER_TIMEOUT
);
99 static inline void rt73usb_register_write_lock(struct rt2x00_dev
*rt2x00dev
,
100 const unsigned int offset
, u32 value
)
102 __le32 reg
= cpu_to_le32(value
);
103 rt2x00usb_vendor_req_buff_lock(rt2x00dev
, USB_MULTI_WRITE
,
104 USB_VENDOR_REQUEST_OUT
, offset
,
105 ®
, sizeof(u32
), REGISTER_TIMEOUT
);
108 static inline void rt73usb_register_multiwrite(struct rt2x00_dev
*rt2x00dev
,
109 const unsigned int offset
,
110 void *value
, const u32 length
)
112 rt2x00usb_vendor_request_buff(rt2x00dev
, USB_MULTI_WRITE
,
113 USB_VENDOR_REQUEST_OUT
, offset
,
115 REGISTER_TIMEOUT32(length
));
118 static u32
rt73usb_bbp_check(struct rt2x00_dev
*rt2x00dev
)
123 for (i
= 0; i
< REGISTER_BUSY_COUNT
; i
++) {
124 rt73usb_register_read_lock(rt2x00dev
, PHY_CSR3
, ®
);
125 if (!rt2x00_get_field32(reg
, PHY_CSR3_BUSY
))
127 udelay(REGISTER_BUSY_DELAY
);
133 static void rt73usb_bbp_write(struct rt2x00_dev
*rt2x00dev
,
134 const unsigned int word
, const u8 value
)
138 mutex_lock(&rt2x00dev
->usb_cache_mutex
);
141 * Wait until the BBP becomes ready.
143 reg
= rt73usb_bbp_check(rt2x00dev
);
144 if (rt2x00_get_field32(reg
, PHY_CSR3_BUSY
))
148 * Write the data into the BBP.
151 rt2x00_set_field32(®
, PHY_CSR3_VALUE
, value
);
152 rt2x00_set_field32(®
, PHY_CSR3_REGNUM
, word
);
153 rt2x00_set_field32(®
, PHY_CSR3_BUSY
, 1);
154 rt2x00_set_field32(®
, PHY_CSR3_READ_CONTROL
, 0);
156 rt73usb_register_write_lock(rt2x00dev
, PHY_CSR3
, reg
);
157 mutex_unlock(&rt2x00dev
->usb_cache_mutex
);
162 mutex_unlock(&rt2x00dev
->usb_cache_mutex
);
164 ERROR(rt2x00dev
, "PHY_CSR3 register busy. Write failed.\n");
167 static void rt73usb_bbp_read(struct rt2x00_dev
*rt2x00dev
,
168 const unsigned int word
, u8
*value
)
172 mutex_lock(&rt2x00dev
->usb_cache_mutex
);
175 * Wait until the BBP becomes ready.
177 reg
= rt73usb_bbp_check(rt2x00dev
);
178 if (rt2x00_get_field32(reg
, PHY_CSR3_BUSY
))
182 * Write the request into the BBP.
185 rt2x00_set_field32(®
, PHY_CSR3_REGNUM
, word
);
186 rt2x00_set_field32(®
, PHY_CSR3_BUSY
, 1);
187 rt2x00_set_field32(®
, PHY_CSR3_READ_CONTROL
, 1);
189 rt73usb_register_write_lock(rt2x00dev
, PHY_CSR3
, reg
);
192 * Wait until the BBP becomes ready.
194 reg
= rt73usb_bbp_check(rt2x00dev
);
195 if (rt2x00_get_field32(reg
, PHY_CSR3_BUSY
))
198 *value
= rt2x00_get_field32(reg
, PHY_CSR3_VALUE
);
199 mutex_unlock(&rt2x00dev
->usb_cache_mutex
);
204 mutex_unlock(&rt2x00dev
->usb_cache_mutex
);
206 ERROR(rt2x00dev
, "PHY_CSR3 register busy. Read failed.\n");
210 static void rt73usb_rf_write(struct rt2x00_dev
*rt2x00dev
,
211 const unsigned int word
, const u32 value
)
219 mutex_lock(&rt2x00dev
->usb_cache_mutex
);
221 for (i
= 0; i
< REGISTER_BUSY_COUNT
; i
++) {
222 rt73usb_register_read_lock(rt2x00dev
, PHY_CSR4
, ®
);
223 if (!rt2x00_get_field32(reg
, PHY_CSR4_BUSY
))
225 udelay(REGISTER_BUSY_DELAY
);
228 mutex_unlock(&rt2x00dev
->usb_cache_mutex
);
229 ERROR(rt2x00dev
, "PHY_CSR4 register busy. Write failed.\n");
234 rt2x00_set_field32(®
, PHY_CSR4_VALUE
, value
);
237 * RF5225 and RF2527 contain 21 bits per RF register value,
238 * all others contain 20 bits.
240 rt2x00_set_field32(®
, PHY_CSR4_NUMBER_OF_BITS
,
241 20 + (rt2x00_rf(&rt2x00dev
->chip
, RF5225
) ||
242 rt2x00_rf(&rt2x00dev
->chip
, RF2527
)));
243 rt2x00_set_field32(®
, PHY_CSR4_IF_SELECT
, 0);
244 rt2x00_set_field32(®
, PHY_CSR4_BUSY
, 1);
246 rt73usb_register_write_lock(rt2x00dev
, PHY_CSR4
, reg
);
247 rt2x00_rf_write(rt2x00dev
, word
, value
);
248 mutex_unlock(&rt2x00dev
->usb_cache_mutex
);
251 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
252 #define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u32)) )
254 static void rt73usb_read_csr(struct rt2x00_dev
*rt2x00dev
,
255 const unsigned int word
, u32
*data
)
257 rt73usb_register_read(rt2x00dev
, CSR_OFFSET(word
), data
);
260 static void rt73usb_write_csr(struct rt2x00_dev
*rt2x00dev
,
261 const unsigned int word
, u32 data
)
263 rt73usb_register_write(rt2x00dev
, CSR_OFFSET(word
), data
);
266 static const struct rt2x00debug rt73usb_rt2x00debug
= {
267 .owner
= THIS_MODULE
,
269 .read
= rt73usb_read_csr
,
270 .write
= rt73usb_write_csr
,
271 .word_size
= sizeof(u32
),
272 .word_count
= CSR_REG_SIZE
/ sizeof(u32
),
275 .read
= rt2x00_eeprom_read
,
276 .write
= rt2x00_eeprom_write
,
277 .word_size
= sizeof(u16
),
278 .word_count
= EEPROM_SIZE
/ sizeof(u16
),
281 .read
= rt73usb_bbp_read
,
282 .write
= rt73usb_bbp_write
,
283 .word_size
= sizeof(u8
),
284 .word_count
= BBP_SIZE
/ sizeof(u8
),
287 .read
= rt2x00_rf_read
,
288 .write
= rt73usb_rf_write
,
289 .word_size
= sizeof(u32
),
290 .word_count
= RF_SIZE
/ sizeof(u32
),
293 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
295 #ifdef CONFIG_RT2X00_LIB_LEDS
296 static void rt73usb_brightness_set(struct led_classdev
*led_cdev
,
297 enum led_brightness brightness
)
299 struct rt2x00_led
*led
=
300 container_of(led_cdev
, struct rt2x00_led
, led_dev
);
301 unsigned int enabled
= brightness
!= LED_OFF
;
302 unsigned int a_mode
=
303 (enabled
&& led
->rt2x00dev
->curr_band
== IEEE80211_BAND_5GHZ
);
304 unsigned int bg_mode
=
305 (enabled
&& led
->rt2x00dev
->curr_band
== IEEE80211_BAND_2GHZ
);
307 if (led
->type
== LED_TYPE_RADIO
) {
308 rt2x00_set_field16(&led
->rt2x00dev
->led_mcu_reg
,
309 MCU_LEDCS_RADIO_STATUS
, enabled
);
311 rt2x00usb_vendor_request_sw(led
->rt2x00dev
, USB_LED_CONTROL
,
312 0, led
->rt2x00dev
->led_mcu_reg
,
314 } else if (led
->type
== LED_TYPE_ASSOC
) {
315 rt2x00_set_field16(&led
->rt2x00dev
->led_mcu_reg
,
316 MCU_LEDCS_LINK_BG_STATUS
, bg_mode
);
317 rt2x00_set_field16(&led
->rt2x00dev
->led_mcu_reg
,
318 MCU_LEDCS_LINK_A_STATUS
, a_mode
);
320 rt2x00usb_vendor_request_sw(led
->rt2x00dev
, USB_LED_CONTROL
,
321 0, led
->rt2x00dev
->led_mcu_reg
,
323 } else if (led
->type
== LED_TYPE_QUALITY
) {
325 * The brightness is divided into 6 levels (0 - 5),
326 * this means we need to convert the brightness
327 * argument into the matching level within that range.
329 rt2x00usb_vendor_request_sw(led
->rt2x00dev
, USB_LED_CONTROL
,
330 brightness
/ (LED_FULL
/ 6),
331 led
->rt2x00dev
->led_mcu_reg
,
336 static int rt73usb_blink_set(struct led_classdev
*led_cdev
,
337 unsigned long *delay_on
,
338 unsigned long *delay_off
)
340 struct rt2x00_led
*led
=
341 container_of(led_cdev
, struct rt2x00_led
, led_dev
);
344 rt73usb_register_read(led
->rt2x00dev
, MAC_CSR14
, ®
);
345 rt2x00_set_field32(®
, MAC_CSR14_ON_PERIOD
, *delay_on
);
346 rt2x00_set_field32(®
, MAC_CSR14_OFF_PERIOD
, *delay_off
);
347 rt73usb_register_write(led
->rt2x00dev
, MAC_CSR14
, reg
);
352 static void rt73usb_init_led(struct rt2x00_dev
*rt2x00dev
,
353 struct rt2x00_led
*led
,
356 led
->rt2x00dev
= rt2x00dev
;
358 led
->led_dev
.brightness_set
= rt73usb_brightness_set
;
359 led
->led_dev
.blink_set
= rt73usb_blink_set
;
360 led
->flags
= LED_INITIALIZED
;
362 #endif /* CONFIG_RT2X00_LIB_LEDS */
365 * Configuration handlers.
367 static int rt73usb_config_shared_key(struct rt2x00_dev
*rt2x00dev
,
368 struct rt2x00lib_crypto
*crypto
,
369 struct ieee80211_key_conf
*key
)
371 struct hw_key_entry key_entry
;
372 struct rt2x00_field32 field
;
377 if (crypto
->cmd
== SET_KEY
) {
379 * rt2x00lib can't determine the correct free
380 * key_idx for shared keys. We have 1 register
381 * with key valid bits. The goal is simple, read
382 * the register, if that is full we have no slots
384 * Note that each BSS is allowed to have up to 4
385 * shared keys, so put a mask over the allowed
388 mask
= (0xf << crypto
->bssidx
);
390 rt73usb_register_read(rt2x00dev
, SEC_CSR0
, ®
);
393 if (reg
&& reg
== mask
)
396 key
->hw_key_idx
+= reg
? ffz(reg
) : 0;
399 * Upload key to hardware
401 memcpy(key_entry
.key
, crypto
->key
,
402 sizeof(key_entry
.key
));
403 memcpy(key_entry
.tx_mic
, crypto
->tx_mic
,
404 sizeof(key_entry
.tx_mic
));
405 memcpy(key_entry
.rx_mic
, crypto
->rx_mic
,
406 sizeof(key_entry
.rx_mic
));
408 reg
= SHARED_KEY_ENTRY(key
->hw_key_idx
);
409 timeout
= REGISTER_TIMEOUT32(sizeof(key_entry
));
410 rt2x00usb_vendor_request_large_buff(rt2x00dev
, USB_MULTI_WRITE
,
411 USB_VENDOR_REQUEST_OUT
, reg
,
417 * The cipher types are stored over 2 registers.
418 * bssidx 0 and 1 keys are stored in SEC_CSR1 and
419 * bssidx 1 and 2 keys are stored in SEC_CSR5.
420 * Using the correct defines correctly will cause overhead,
421 * so just calculate the correct offset.
423 if (key
->hw_key_idx
< 8) {
424 field
.bit_offset
= (3 * key
->hw_key_idx
);
425 field
.bit_mask
= 0x7 << field
.bit_offset
;
427 rt73usb_register_read(rt2x00dev
, SEC_CSR1
, ®
);
428 rt2x00_set_field32(®
, field
, crypto
->cipher
);
429 rt73usb_register_write(rt2x00dev
, SEC_CSR1
, reg
);
431 field
.bit_offset
= (3 * (key
->hw_key_idx
- 8));
432 field
.bit_mask
= 0x7 << field
.bit_offset
;
434 rt73usb_register_read(rt2x00dev
, SEC_CSR5
, ®
);
435 rt2x00_set_field32(®
, field
, crypto
->cipher
);
436 rt73usb_register_write(rt2x00dev
, SEC_CSR5
, reg
);
440 * The driver does not support the IV/EIV generation
441 * in hardware. However it doesn't support the IV/EIV
442 * inside the ieee80211 frame either, but requires it
443 * to be provided seperately for the descriptor.
444 * rt2x00lib will cut the IV/EIV data out of all frames
445 * given to us by mac80211, but we must tell mac80211
446 * to generate the IV/EIV data.
448 key
->flags
|= IEEE80211_KEY_FLAG_GENERATE_IV
;
452 * SEC_CSR0 contains only single-bit fields to indicate
453 * a particular key is valid. Because using the FIELD32()
454 * defines directly will cause a lot of overhead we use
455 * a calculation to determine the correct bit directly.
457 mask
= 1 << key
->hw_key_idx
;
459 rt73usb_register_read(rt2x00dev
, SEC_CSR0
, ®
);
460 if (crypto
->cmd
== SET_KEY
)
462 else if (crypto
->cmd
== DISABLE_KEY
)
464 rt73usb_register_write(rt2x00dev
, SEC_CSR0
, reg
);
469 static int rt73usb_config_pairwise_key(struct rt2x00_dev
*rt2x00dev
,
470 struct rt2x00lib_crypto
*crypto
,
471 struct ieee80211_key_conf
*key
)
473 struct hw_pairwise_ta_entry addr_entry
;
474 struct hw_key_entry key_entry
;
479 if (crypto
->cmd
== SET_KEY
) {
481 * rt2x00lib can't determine the correct free
482 * key_idx for pairwise keys. We have 2 registers
483 * with key valid bits. The goal is simple, read
484 * the first register, if that is full move to
486 * When both registers are full, we drop the key,
487 * otherwise we use the first invalid entry.
489 rt73usb_register_read(rt2x00dev
, SEC_CSR2
, ®
);
490 if (reg
&& reg
== ~0) {
491 key
->hw_key_idx
= 32;
492 rt73usb_register_read(rt2x00dev
, SEC_CSR3
, ®
);
493 if (reg
&& reg
== ~0)
497 key
->hw_key_idx
+= reg
? ffz(reg
) : 0;
500 * Upload key to hardware
502 memcpy(key_entry
.key
, crypto
->key
,
503 sizeof(key_entry
.key
));
504 memcpy(key_entry
.tx_mic
, crypto
->tx_mic
,
505 sizeof(key_entry
.tx_mic
));
506 memcpy(key_entry
.rx_mic
, crypto
->rx_mic
,
507 sizeof(key_entry
.rx_mic
));
509 reg
= PAIRWISE_KEY_ENTRY(key
->hw_key_idx
);
510 timeout
= REGISTER_TIMEOUT32(sizeof(key_entry
));
511 rt2x00usb_vendor_request_large_buff(rt2x00dev
, USB_MULTI_WRITE
,
512 USB_VENDOR_REQUEST_OUT
, reg
,
518 * Send the address and cipher type to the hardware register.
519 * This data fits within the CSR cache size, so we can use
520 * rt73usb_register_multiwrite() directly.
522 memset(&addr_entry
, 0, sizeof(addr_entry
));
523 memcpy(&addr_entry
, crypto
->address
, ETH_ALEN
);
524 addr_entry
.cipher
= crypto
->cipher
;
526 reg
= PAIRWISE_TA_ENTRY(key
->hw_key_idx
);
527 rt73usb_register_multiwrite(rt2x00dev
, reg
,
528 &addr_entry
, sizeof(addr_entry
));
531 * Enable pairwise lookup table for given BSS idx,
532 * without this received frames will not be decrypted
535 rt73usb_register_read(rt2x00dev
, SEC_CSR4
, ®
);
536 reg
|= (1 << crypto
->bssidx
);
537 rt73usb_register_write(rt2x00dev
, SEC_CSR4
, reg
);
540 * The driver does not support the IV/EIV generation
541 * in hardware. However it doesn't support the IV/EIV
542 * inside the ieee80211 frame either, but requires it
543 * to be provided seperately for the descriptor.
544 * rt2x00lib will cut the IV/EIV data out of all frames
545 * given to us by mac80211, but we must tell mac80211
546 * to generate the IV/EIV data.
548 key
->flags
|= IEEE80211_KEY_FLAG_GENERATE_IV
;
552 * SEC_CSR2 and SEC_CSR3 contain only single-bit fields to indicate
553 * a particular key is valid. Because using the FIELD32()
554 * defines directly will cause a lot of overhead we use
555 * a calculation to determine the correct bit directly.
557 if (key
->hw_key_idx
< 32) {
558 mask
= 1 << key
->hw_key_idx
;
560 rt73usb_register_read(rt2x00dev
, SEC_CSR2
, ®
);
561 if (crypto
->cmd
== SET_KEY
)
563 else if (crypto
->cmd
== DISABLE_KEY
)
565 rt73usb_register_write(rt2x00dev
, SEC_CSR2
, reg
);
567 mask
= 1 << (key
->hw_key_idx
- 32);
569 rt73usb_register_read(rt2x00dev
, SEC_CSR3
, ®
);
570 if (crypto
->cmd
== SET_KEY
)
572 else if (crypto
->cmd
== DISABLE_KEY
)
574 rt73usb_register_write(rt2x00dev
, SEC_CSR3
, reg
);
580 static void rt73usb_config_filter(struct rt2x00_dev
*rt2x00dev
,
581 const unsigned int filter_flags
)
586 * Start configuration steps.
587 * Note that the version error will always be dropped
588 * and broadcast frames will always be accepted since
589 * there is no filter for it at this time.
591 rt73usb_register_read(rt2x00dev
, TXRX_CSR0
, ®
);
592 rt2x00_set_field32(®
, TXRX_CSR0_DROP_CRC
,
593 !(filter_flags
& FIF_FCSFAIL
));
594 rt2x00_set_field32(®
, TXRX_CSR0_DROP_PHYSICAL
,
595 !(filter_flags
& FIF_PLCPFAIL
));
596 rt2x00_set_field32(®
, TXRX_CSR0_DROP_CONTROL
,
597 !(filter_flags
& FIF_CONTROL
));
598 rt2x00_set_field32(®
, TXRX_CSR0_DROP_NOT_TO_ME
,
599 !(filter_flags
& FIF_PROMISC_IN_BSS
));
600 rt2x00_set_field32(®
, TXRX_CSR0_DROP_TO_DS
,
601 !(filter_flags
& FIF_PROMISC_IN_BSS
) &&
602 !rt2x00dev
->intf_ap_count
);
603 rt2x00_set_field32(®
, TXRX_CSR0_DROP_VERSION_ERROR
, 1);
604 rt2x00_set_field32(®
, TXRX_CSR0_DROP_MULTICAST
,
605 !(filter_flags
& FIF_ALLMULTI
));
606 rt2x00_set_field32(®
, TXRX_CSR0_DROP_BROADCAST
, 0);
607 rt2x00_set_field32(®
, TXRX_CSR0_DROP_ACK_CTS
,
608 !(filter_flags
& FIF_CONTROL
));
609 rt73usb_register_write(rt2x00dev
, TXRX_CSR0
, reg
);
612 static void rt73usb_config_intf(struct rt2x00_dev
*rt2x00dev
,
613 struct rt2x00_intf
*intf
,
614 struct rt2x00intf_conf
*conf
,
615 const unsigned int flags
)
617 unsigned int beacon_base
;
620 if (flags
& CONFIG_UPDATE_TYPE
) {
622 * Clear current synchronisation setup.
623 * For the Beacon base registers we only need to clear
624 * the first byte since that byte contains the VALID and OWNER
625 * bits which (when set to 0) will invalidate the entire beacon.
627 beacon_base
= HW_BEACON_OFFSET(intf
->beacon
->entry_idx
);
628 rt73usb_register_write(rt2x00dev
, beacon_base
, 0);
631 * Enable synchronisation.
633 rt73usb_register_read(rt2x00dev
, TXRX_CSR9
, ®
);
634 rt2x00_set_field32(®
, TXRX_CSR9_TSF_TICKING
, 1);
635 rt2x00_set_field32(®
, TXRX_CSR9_TSF_SYNC
, conf
->sync
);
636 rt2x00_set_field32(®
, TXRX_CSR9_TBTT_ENABLE
, 1);
637 rt73usb_register_write(rt2x00dev
, TXRX_CSR9
, reg
);
640 if (flags
& CONFIG_UPDATE_MAC
) {
641 reg
= le32_to_cpu(conf
->mac
[1]);
642 rt2x00_set_field32(®
, MAC_CSR3_UNICAST_TO_ME_MASK
, 0xff);
643 conf
->mac
[1] = cpu_to_le32(reg
);
645 rt73usb_register_multiwrite(rt2x00dev
, MAC_CSR2
,
646 conf
->mac
, sizeof(conf
->mac
));
649 if (flags
& CONFIG_UPDATE_BSSID
) {
650 reg
= le32_to_cpu(conf
->bssid
[1]);
651 rt2x00_set_field32(®
, MAC_CSR5_BSS_ID_MASK
, 3);
652 conf
->bssid
[1] = cpu_to_le32(reg
);
654 rt73usb_register_multiwrite(rt2x00dev
, MAC_CSR4
,
655 conf
->bssid
, sizeof(conf
->bssid
));
659 static void rt73usb_config_erp(struct rt2x00_dev
*rt2x00dev
,
660 struct rt2x00lib_erp
*erp
)
664 rt73usb_register_read(rt2x00dev
, TXRX_CSR0
, ®
);
665 rt2x00_set_field32(®
, TXRX_CSR0_RX_ACK_TIMEOUT
, erp
->ack_timeout
);
666 rt73usb_register_write(rt2x00dev
, TXRX_CSR0
, reg
);
668 rt73usb_register_read(rt2x00dev
, TXRX_CSR4
, ®
);
669 rt2x00_set_field32(®
, TXRX_CSR4_AUTORESPOND_PREAMBLE
,
670 !!erp
->short_preamble
);
671 rt73usb_register_write(rt2x00dev
, TXRX_CSR4
, reg
);
674 static void rt73usb_config_lna_gain(struct rt2x00_dev
*rt2x00dev
,
675 struct rt2x00lib_conf
*libconf
)
680 if (libconf
->band
== IEEE80211_BAND_2GHZ
) {
681 if (test_bit(CONFIG_EXTERNAL_LNA_BG
, &rt2x00dev
->flags
))
684 rt2x00_eeprom_read(rt2x00dev
, EEPROM_RSSI_OFFSET_BG
, &eeprom
);
685 lna_gain
-= rt2x00_get_field16(eeprom
, EEPROM_RSSI_OFFSET_BG_1
);
687 rt2x00_eeprom_read(rt2x00dev
, EEPROM_RSSI_OFFSET_A
, &eeprom
);
688 lna_gain
-= rt2x00_get_field16(eeprom
, EEPROM_RSSI_OFFSET_A_1
);
691 rt2x00dev
->lna_gain
= lna_gain
;
694 static void rt73usb_config_phymode(struct rt2x00_dev
*rt2x00dev
,
695 const int basic_rate_mask
)
697 rt73usb_register_write(rt2x00dev
, TXRX_CSR5
, basic_rate_mask
);
700 static void rt73usb_config_channel(struct rt2x00_dev
*rt2x00dev
,
701 struct rf_channel
*rf
, const int txpower
)
707 rt2x00_set_field32(&rf
->rf3
, RF3_TXPOWER
, TXPOWER_TO_DEV(txpower
));
708 rt2x00_set_field32(&rf
->rf4
, RF4_FREQ_OFFSET
, rt2x00dev
->freq_offset
);
710 smart
= !(rt2x00_rf(&rt2x00dev
->chip
, RF5225
) ||
711 rt2x00_rf(&rt2x00dev
->chip
, RF2527
));
713 rt73usb_bbp_read(rt2x00dev
, 3, &r3
);
714 rt2x00_set_field8(&r3
, BBP_R3_SMART_MODE
, smart
);
715 rt73usb_bbp_write(rt2x00dev
, 3, r3
);
718 if (txpower
> MAX_TXPOWER
&& txpower
<= (MAX_TXPOWER
+ r94
))
719 r94
+= txpower
- MAX_TXPOWER
;
720 else if (txpower
< MIN_TXPOWER
&& txpower
>= (MIN_TXPOWER
- r94
))
722 rt73usb_bbp_write(rt2x00dev
, 94, r94
);
724 rt73usb_rf_write(rt2x00dev
, 1, rf
->rf1
);
725 rt73usb_rf_write(rt2x00dev
, 2, rf
->rf2
);
726 rt73usb_rf_write(rt2x00dev
, 3, rf
->rf3
& ~0x00000004);
727 rt73usb_rf_write(rt2x00dev
, 4, rf
->rf4
);
729 rt73usb_rf_write(rt2x00dev
, 1, rf
->rf1
);
730 rt73usb_rf_write(rt2x00dev
, 2, rf
->rf2
);
731 rt73usb_rf_write(rt2x00dev
, 3, rf
->rf3
| 0x00000004);
732 rt73usb_rf_write(rt2x00dev
, 4, rf
->rf4
);
734 rt73usb_rf_write(rt2x00dev
, 1, rf
->rf1
);
735 rt73usb_rf_write(rt2x00dev
, 2, rf
->rf2
);
736 rt73usb_rf_write(rt2x00dev
, 3, rf
->rf3
& ~0x00000004);
737 rt73usb_rf_write(rt2x00dev
, 4, rf
->rf4
);
742 static void rt73usb_config_txpower(struct rt2x00_dev
*rt2x00dev
,
745 struct rf_channel rf
;
747 rt2x00_rf_read(rt2x00dev
, 1, &rf
.rf1
);
748 rt2x00_rf_read(rt2x00dev
, 2, &rf
.rf2
);
749 rt2x00_rf_read(rt2x00dev
, 3, &rf
.rf3
);
750 rt2x00_rf_read(rt2x00dev
, 4, &rf
.rf4
);
752 rt73usb_config_channel(rt2x00dev
, &rf
, txpower
);
755 static void rt73usb_config_antenna_5x(struct rt2x00_dev
*rt2x00dev
,
756 struct antenna_setup
*ant
)
763 rt73usb_bbp_read(rt2x00dev
, 3, &r3
);
764 rt73usb_bbp_read(rt2x00dev
, 4, &r4
);
765 rt73usb_bbp_read(rt2x00dev
, 77, &r77
);
767 rt2x00_set_field8(&r3
, BBP_R3_SMART_MODE
, 0);
770 * Configure the RX antenna.
773 case ANTENNA_HW_DIVERSITY
:
774 rt2x00_set_field8(&r4
, BBP_R4_RX_ANTENNA_CONTROL
, 2);
775 temp
= !test_bit(CONFIG_FRAME_TYPE
, &rt2x00dev
->flags
)
776 && (rt2x00dev
->curr_band
!= IEEE80211_BAND_5GHZ
);
777 rt2x00_set_field8(&r4
, BBP_R4_RX_FRAME_END
, temp
);
780 rt2x00_set_field8(&r4
, BBP_R4_RX_ANTENNA_CONTROL
, 1);
781 rt2x00_set_field8(&r4
, BBP_R4_RX_FRAME_END
, 0);
782 if (rt2x00dev
->curr_band
== IEEE80211_BAND_5GHZ
)
783 rt2x00_set_field8(&r77
, BBP_R77_RX_ANTENNA
, 0);
785 rt2x00_set_field8(&r77
, BBP_R77_RX_ANTENNA
, 3);
789 rt2x00_set_field8(&r4
, BBP_R4_RX_ANTENNA_CONTROL
, 1);
790 rt2x00_set_field8(&r4
, BBP_R4_RX_FRAME_END
, 0);
791 if (rt2x00dev
->curr_band
== IEEE80211_BAND_5GHZ
)
792 rt2x00_set_field8(&r77
, BBP_R77_RX_ANTENNA
, 3);
794 rt2x00_set_field8(&r77
, BBP_R77_RX_ANTENNA
, 0);
798 rt73usb_bbp_write(rt2x00dev
, 77, r77
);
799 rt73usb_bbp_write(rt2x00dev
, 3, r3
);
800 rt73usb_bbp_write(rt2x00dev
, 4, r4
);
803 static void rt73usb_config_antenna_2x(struct rt2x00_dev
*rt2x00dev
,
804 struct antenna_setup
*ant
)
810 rt73usb_bbp_read(rt2x00dev
, 3, &r3
);
811 rt73usb_bbp_read(rt2x00dev
, 4, &r4
);
812 rt73usb_bbp_read(rt2x00dev
, 77, &r77
);
814 rt2x00_set_field8(&r3
, BBP_R3_SMART_MODE
, 0);
815 rt2x00_set_field8(&r4
, BBP_R4_RX_FRAME_END
,
816 !test_bit(CONFIG_FRAME_TYPE
, &rt2x00dev
->flags
));
819 * Configure the RX antenna.
822 case ANTENNA_HW_DIVERSITY
:
823 rt2x00_set_field8(&r4
, BBP_R4_RX_ANTENNA_CONTROL
, 2);
826 rt2x00_set_field8(&r77
, BBP_R77_RX_ANTENNA
, 3);
827 rt2x00_set_field8(&r4
, BBP_R4_RX_ANTENNA_CONTROL
, 1);
831 rt2x00_set_field8(&r77
, BBP_R77_RX_ANTENNA
, 0);
832 rt2x00_set_field8(&r4
, BBP_R4_RX_ANTENNA_CONTROL
, 1);
836 rt73usb_bbp_write(rt2x00dev
, 77, r77
);
837 rt73usb_bbp_write(rt2x00dev
, 3, r3
);
838 rt73usb_bbp_write(rt2x00dev
, 4, r4
);
844 * value[0] -> non-LNA
850 static const struct antenna_sel antenna_sel_a
[] = {
851 { 96, { 0x58, 0x78 } },
852 { 104, { 0x38, 0x48 } },
853 { 75, { 0xfe, 0x80 } },
854 { 86, { 0xfe, 0x80 } },
855 { 88, { 0xfe, 0x80 } },
856 { 35, { 0x60, 0x60 } },
857 { 97, { 0x58, 0x58 } },
858 { 98, { 0x58, 0x58 } },
861 static const struct antenna_sel antenna_sel_bg
[] = {
862 { 96, { 0x48, 0x68 } },
863 { 104, { 0x2c, 0x3c } },
864 { 75, { 0xfe, 0x80 } },
865 { 86, { 0xfe, 0x80 } },
866 { 88, { 0xfe, 0x80 } },
867 { 35, { 0x50, 0x50 } },
868 { 97, { 0x48, 0x48 } },
869 { 98, { 0x48, 0x48 } },
872 static void rt73usb_config_antenna(struct rt2x00_dev
*rt2x00dev
,
873 struct antenna_setup
*ant
)
875 const struct antenna_sel
*sel
;
881 * We should never come here because rt2x00lib is supposed
882 * to catch this and send us the correct antenna explicitely.
884 BUG_ON(ant
->rx
== ANTENNA_SW_DIVERSITY
||
885 ant
->tx
== ANTENNA_SW_DIVERSITY
);
887 if (rt2x00dev
->curr_band
== IEEE80211_BAND_5GHZ
) {
889 lna
= test_bit(CONFIG_EXTERNAL_LNA_A
, &rt2x00dev
->flags
);
891 sel
= antenna_sel_bg
;
892 lna
= test_bit(CONFIG_EXTERNAL_LNA_BG
, &rt2x00dev
->flags
);
895 for (i
= 0; i
< ARRAY_SIZE(antenna_sel_a
); i
++)
896 rt73usb_bbp_write(rt2x00dev
, sel
[i
].word
, sel
[i
].value
[lna
]);
898 rt73usb_register_read(rt2x00dev
, PHY_CSR0
, ®
);
900 rt2x00_set_field32(®
, PHY_CSR0_PA_PE_BG
,
901 (rt2x00dev
->curr_band
== IEEE80211_BAND_2GHZ
));
902 rt2x00_set_field32(®
, PHY_CSR0_PA_PE_A
,
903 (rt2x00dev
->curr_band
== IEEE80211_BAND_5GHZ
));
905 rt73usb_register_write(rt2x00dev
, PHY_CSR0
, reg
);
907 if (rt2x00_rf(&rt2x00dev
->chip
, RF5226
) ||
908 rt2x00_rf(&rt2x00dev
->chip
, RF5225
))
909 rt73usb_config_antenna_5x(rt2x00dev
, ant
);
910 else if (rt2x00_rf(&rt2x00dev
->chip
, RF2528
) ||
911 rt2x00_rf(&rt2x00dev
->chip
, RF2527
))
912 rt73usb_config_antenna_2x(rt2x00dev
, ant
);
915 static void rt73usb_config_duration(struct rt2x00_dev
*rt2x00dev
,
916 struct rt2x00lib_conf
*libconf
)
920 rt73usb_register_read(rt2x00dev
, MAC_CSR9
, ®
);
921 rt2x00_set_field32(®
, MAC_CSR9_SLOT_TIME
, libconf
->slot_time
);
922 rt73usb_register_write(rt2x00dev
, MAC_CSR9
, reg
);
924 rt73usb_register_read(rt2x00dev
, MAC_CSR8
, ®
);
925 rt2x00_set_field32(®
, MAC_CSR8_SIFS
, libconf
->sifs
);
926 rt2x00_set_field32(®
, MAC_CSR8_SIFS_AFTER_RX_OFDM
, 3);
927 rt2x00_set_field32(®
, MAC_CSR8_EIFS
, libconf
->eifs
);
928 rt73usb_register_write(rt2x00dev
, MAC_CSR8
, reg
);
930 rt73usb_register_read(rt2x00dev
, TXRX_CSR0
, ®
);
931 rt2x00_set_field32(®
, TXRX_CSR0_TSF_OFFSET
, IEEE80211_HEADER
);
932 rt73usb_register_write(rt2x00dev
, TXRX_CSR0
, reg
);
934 rt73usb_register_read(rt2x00dev
, TXRX_CSR4
, ®
);
935 rt2x00_set_field32(®
, TXRX_CSR4_AUTORESPOND_ENABLE
, 1);
936 rt73usb_register_write(rt2x00dev
, TXRX_CSR4
, reg
);
938 rt73usb_register_read(rt2x00dev
, TXRX_CSR9
, ®
);
939 rt2x00_set_field32(®
, TXRX_CSR9_BEACON_INTERVAL
,
940 libconf
->conf
->beacon_int
* 16);
941 rt73usb_register_write(rt2x00dev
, TXRX_CSR9
, reg
);
944 static void rt73usb_config(struct rt2x00_dev
*rt2x00dev
,
945 struct rt2x00lib_conf
*libconf
,
946 const unsigned int flags
)
948 /* Always recalculate LNA gain before changing configuration */
949 rt73usb_config_lna_gain(rt2x00dev
, libconf
);
951 if (flags
& CONFIG_UPDATE_PHYMODE
)
952 rt73usb_config_phymode(rt2x00dev
, libconf
->basic_rates
);
953 if (flags
& CONFIG_UPDATE_CHANNEL
)
954 rt73usb_config_channel(rt2x00dev
, &libconf
->rf
,
955 libconf
->conf
->power_level
);
956 if ((flags
& CONFIG_UPDATE_TXPOWER
) && !(flags
& CONFIG_UPDATE_CHANNEL
))
957 rt73usb_config_txpower(rt2x00dev
, libconf
->conf
->power_level
);
958 if (flags
& CONFIG_UPDATE_ANTENNA
)
959 rt73usb_config_antenna(rt2x00dev
, &libconf
->ant
);
960 if (flags
& (CONFIG_UPDATE_SLOT_TIME
| CONFIG_UPDATE_BEACON_INT
))
961 rt73usb_config_duration(rt2x00dev
, libconf
);
967 static void rt73usb_link_stats(struct rt2x00_dev
*rt2x00dev
,
968 struct link_qual
*qual
)
973 * Update FCS error count from register.
975 rt73usb_register_read(rt2x00dev
, STA_CSR0
, ®
);
976 qual
->rx_failed
= rt2x00_get_field32(reg
, STA_CSR0_FCS_ERROR
);
979 * Update False CCA count from register.
981 rt73usb_register_read(rt2x00dev
, STA_CSR1
, ®
);
982 qual
->false_cca
= rt2x00_get_field32(reg
, STA_CSR1_FALSE_CCA_ERROR
);
985 static void rt73usb_reset_tuner(struct rt2x00_dev
*rt2x00dev
)
987 rt73usb_bbp_write(rt2x00dev
, 17, 0x20);
988 rt2x00dev
->link
.vgc_level
= 0x20;
991 static void rt73usb_link_tuner(struct rt2x00_dev
*rt2x00dev
)
993 int rssi
= rt2x00_get_link_rssi(&rt2x00dev
->link
);
998 rt73usb_bbp_read(rt2x00dev
, 17, &r17
);
1001 * Determine r17 bounds.
1003 if (rt2x00dev
->rx_status
.band
== IEEE80211_BAND_5GHZ
) {
1007 if (test_bit(CONFIG_EXTERNAL_LNA_A
, &rt2x00dev
->flags
)) {
1015 } else if (rssi
> -84) {
1023 if (test_bit(CONFIG_EXTERNAL_LNA_BG
, &rt2x00dev
->flags
)) {
1030 * If we are not associated, we should go straight to the
1031 * dynamic CCA tuning.
1033 if (!rt2x00dev
->intf_associated
)
1034 goto dynamic_cca_tune
;
1037 * Special big-R17 for very short distance
1041 rt73usb_bbp_write(rt2x00dev
, 17, 0x60);
1046 * Special big-R17 for short distance
1049 if (r17
!= up_bound
)
1050 rt73usb_bbp_write(rt2x00dev
, 17, up_bound
);
1055 * Special big-R17 for middle-short distance
1059 if (r17
!= low_bound
)
1060 rt73usb_bbp_write(rt2x00dev
, 17, low_bound
);
1065 * Special mid-R17 for middle distance
1068 if (r17
!= (low_bound
+ 0x10))
1069 rt73usb_bbp_write(rt2x00dev
, 17, low_bound
+ 0x08);
1074 * Special case: Change up_bound based on the rssi.
1075 * Lower up_bound when rssi is weaker then -74 dBm.
1077 up_bound
-= 2 * (-74 - rssi
);
1078 if (low_bound
> up_bound
)
1079 up_bound
= low_bound
;
1081 if (r17
> up_bound
) {
1082 rt73usb_bbp_write(rt2x00dev
, 17, up_bound
);
1089 * r17 does not yet exceed upper limit, continue and base
1090 * the r17 tuning on the false CCA count.
1092 if (rt2x00dev
->link
.qual
.false_cca
> 512 && r17
< up_bound
) {
1096 rt73usb_bbp_write(rt2x00dev
, 17, r17
);
1097 } else if (rt2x00dev
->link
.qual
.false_cca
< 100 && r17
> low_bound
) {
1099 if (r17
< low_bound
)
1101 rt73usb_bbp_write(rt2x00dev
, 17, r17
);
1106 * Firmware functions
1108 static char *rt73usb_get_firmware_name(struct rt2x00_dev
*rt2x00dev
)
1110 return FIRMWARE_RT2571
;
1113 static u16
rt73usb_get_firmware_crc(const void *data
, const size_t len
)
1118 * Use the crc itu-t algorithm.
1119 * The last 2 bytes in the firmware array are the crc checksum itself,
1120 * this means that we should never pass those 2 bytes to the crc
1123 crc
= crc_itu_t(0, data
, len
- 2);
1124 crc
= crc_itu_t_byte(crc
, 0);
1125 crc
= crc_itu_t_byte(crc
, 0);
1130 static int rt73usb_load_firmware(struct rt2x00_dev
*rt2x00dev
, const void *data
,
1138 * Wait for stable hardware.
1140 for (i
= 0; i
< 100; i
++) {
1141 rt73usb_register_read(rt2x00dev
, MAC_CSR0
, ®
);
1148 ERROR(rt2x00dev
, "Unstable hardware.\n");
1153 * Write firmware to device.
1155 rt2x00usb_vendor_request_large_buff(rt2x00dev
, USB_MULTI_WRITE
,
1156 USB_VENDOR_REQUEST_OUT
,
1157 FIRMWARE_IMAGE_BASE
,
1159 REGISTER_TIMEOUT32(len
));
1162 * Send firmware request to device to load firmware,
1163 * we need to specify a long timeout time.
1165 status
= rt2x00usb_vendor_request_sw(rt2x00dev
, USB_DEVICE_MODE
,
1166 0, USB_MODE_FIRMWARE
,
1167 REGISTER_TIMEOUT_FIRMWARE
);
1169 ERROR(rt2x00dev
, "Failed to write Firmware to device.\n");
1177 * Initialization functions.
1179 static int rt73usb_init_registers(struct rt2x00_dev
*rt2x00dev
)
1183 rt73usb_register_read(rt2x00dev
, TXRX_CSR0
, ®
);
1184 rt2x00_set_field32(®
, TXRX_CSR0_AUTO_TX_SEQ
, 1);
1185 rt2x00_set_field32(®
, TXRX_CSR0_DISABLE_RX
, 0);
1186 rt2x00_set_field32(®
, TXRX_CSR0_TX_WITHOUT_WAITING
, 0);
1187 rt73usb_register_write(rt2x00dev
, TXRX_CSR0
, reg
);
1189 rt73usb_register_read(rt2x00dev
, TXRX_CSR1
, ®
);
1190 rt2x00_set_field32(®
, TXRX_CSR1_BBP_ID0
, 47); /* CCK Signal */
1191 rt2x00_set_field32(®
, TXRX_CSR1_BBP_ID0_VALID
, 1);
1192 rt2x00_set_field32(®
, TXRX_CSR1_BBP_ID1
, 30); /* Rssi */
1193 rt2x00_set_field32(®
, TXRX_CSR1_BBP_ID1_VALID
, 1);
1194 rt2x00_set_field32(®
, TXRX_CSR1_BBP_ID2
, 42); /* OFDM Rate */
1195 rt2x00_set_field32(®
, TXRX_CSR1_BBP_ID2_VALID
, 1);
1196 rt2x00_set_field32(®
, TXRX_CSR1_BBP_ID3
, 30); /* Rssi */
1197 rt2x00_set_field32(®
, TXRX_CSR1_BBP_ID3_VALID
, 1);
1198 rt73usb_register_write(rt2x00dev
, TXRX_CSR1
, reg
);
1201 * CCK TXD BBP registers
1203 rt73usb_register_read(rt2x00dev
, TXRX_CSR2
, ®
);
1204 rt2x00_set_field32(®
, TXRX_CSR2_BBP_ID0
, 13);
1205 rt2x00_set_field32(®
, TXRX_CSR2_BBP_ID0_VALID
, 1);
1206 rt2x00_set_field32(®
, TXRX_CSR2_BBP_ID1
, 12);
1207 rt2x00_set_field32(®
, TXRX_CSR2_BBP_ID1_VALID
, 1);
1208 rt2x00_set_field32(®
, TXRX_CSR2_BBP_ID2
, 11);
1209 rt2x00_set_field32(®
, TXRX_CSR2_BBP_ID2_VALID
, 1);
1210 rt2x00_set_field32(®
, TXRX_CSR2_BBP_ID3
, 10);
1211 rt2x00_set_field32(®
, TXRX_CSR2_BBP_ID3_VALID
, 1);
1212 rt73usb_register_write(rt2x00dev
, TXRX_CSR2
, reg
);
1215 * OFDM TXD BBP registers
1217 rt73usb_register_read(rt2x00dev
, TXRX_CSR3
, ®
);
1218 rt2x00_set_field32(®
, TXRX_CSR3_BBP_ID0
, 7);
1219 rt2x00_set_field32(®
, TXRX_CSR3_BBP_ID0_VALID
, 1);
1220 rt2x00_set_field32(®
, TXRX_CSR3_BBP_ID1
, 6);
1221 rt2x00_set_field32(®
, TXRX_CSR3_BBP_ID1_VALID
, 1);
1222 rt2x00_set_field32(®
, TXRX_CSR3_BBP_ID2
, 5);
1223 rt2x00_set_field32(®
, TXRX_CSR3_BBP_ID2_VALID
, 1);
1224 rt73usb_register_write(rt2x00dev
, TXRX_CSR3
, reg
);
1226 rt73usb_register_read(rt2x00dev
, TXRX_CSR7
, ®
);
1227 rt2x00_set_field32(®
, TXRX_CSR7_ACK_CTS_6MBS
, 59);
1228 rt2x00_set_field32(®
, TXRX_CSR7_ACK_CTS_9MBS
, 53);
1229 rt2x00_set_field32(®
, TXRX_CSR7_ACK_CTS_12MBS
, 49);
1230 rt2x00_set_field32(®
, TXRX_CSR7_ACK_CTS_18MBS
, 46);
1231 rt73usb_register_write(rt2x00dev
, TXRX_CSR7
, reg
);
1233 rt73usb_register_read(rt2x00dev
, TXRX_CSR8
, ®
);
1234 rt2x00_set_field32(®
, TXRX_CSR8_ACK_CTS_24MBS
, 44);
1235 rt2x00_set_field32(®
, TXRX_CSR8_ACK_CTS_36MBS
, 42);
1236 rt2x00_set_field32(®
, TXRX_CSR8_ACK_CTS_48MBS
, 42);
1237 rt2x00_set_field32(®
, TXRX_CSR8_ACK_CTS_54MBS
, 42);
1238 rt73usb_register_write(rt2x00dev
, TXRX_CSR8
, reg
);
1240 rt73usb_register_read(rt2x00dev
, TXRX_CSR9
, ®
);
1241 rt2x00_set_field32(®
, TXRX_CSR9_BEACON_INTERVAL
, 0);
1242 rt2x00_set_field32(®
, TXRX_CSR9_TSF_TICKING
, 0);
1243 rt2x00_set_field32(®
, TXRX_CSR9_TSF_SYNC
, 0);
1244 rt2x00_set_field32(®
, TXRX_CSR9_TBTT_ENABLE
, 0);
1245 rt2x00_set_field32(®
, TXRX_CSR9_BEACON_GEN
, 0);
1246 rt2x00_set_field32(®
, TXRX_CSR9_TIMESTAMP_COMPENSATE
, 0);
1247 rt73usb_register_write(rt2x00dev
, TXRX_CSR9
, reg
);
1249 rt73usb_register_write(rt2x00dev
, TXRX_CSR15
, 0x0000000f);
1251 rt73usb_register_read(rt2x00dev
, MAC_CSR6
, ®
);
1252 rt2x00_set_field32(®
, MAC_CSR6_MAX_FRAME_UNIT
, 0xfff);
1253 rt73usb_register_write(rt2x00dev
, MAC_CSR6
, reg
);
1255 rt73usb_register_write(rt2x00dev
, MAC_CSR10
, 0x00000718);
1257 if (rt2x00dev
->ops
->lib
->set_device_state(rt2x00dev
, STATE_AWAKE
))
1260 rt73usb_register_write(rt2x00dev
, MAC_CSR13
, 0x00007f00);
1263 * Invalidate all Shared Keys (SEC_CSR0),
1264 * and clear the Shared key Cipher algorithms (SEC_CSR1 & SEC_CSR5)
1266 rt73usb_register_write(rt2x00dev
, SEC_CSR0
, 0x00000000);
1267 rt73usb_register_write(rt2x00dev
, SEC_CSR1
, 0x00000000);
1268 rt73usb_register_write(rt2x00dev
, SEC_CSR5
, 0x00000000);
1271 if (rt2x00_rf(&rt2x00dev
->chip
, RF5225
) ||
1272 rt2x00_rf(&rt2x00dev
->chip
, RF2527
))
1273 rt2x00_set_field32(®
, PHY_CSR1_RF_RPI
, 1);
1274 rt73usb_register_write(rt2x00dev
, PHY_CSR1
, reg
);
1276 rt73usb_register_write(rt2x00dev
, PHY_CSR5
, 0x00040a06);
1277 rt73usb_register_write(rt2x00dev
, PHY_CSR6
, 0x00080606);
1278 rt73usb_register_write(rt2x00dev
, PHY_CSR7
, 0x00000408);
1280 rt73usb_register_read(rt2x00dev
, MAC_CSR9
, ®
);
1281 rt2x00_set_field32(®
, MAC_CSR9_CW_SELECT
, 0);
1282 rt73usb_register_write(rt2x00dev
, MAC_CSR9
, reg
);
1286 * For the Beacon base registers we only need to clear
1287 * the first byte since that byte contains the VALID and OWNER
1288 * bits which (when set to 0) will invalidate the entire beacon.
1290 rt73usb_register_write(rt2x00dev
, HW_BEACON_BASE0
, 0);
1291 rt73usb_register_write(rt2x00dev
, HW_BEACON_BASE1
, 0);
1292 rt73usb_register_write(rt2x00dev
, HW_BEACON_BASE2
, 0);
1293 rt73usb_register_write(rt2x00dev
, HW_BEACON_BASE3
, 0);
1296 * We must clear the error counters.
1297 * These registers are cleared on read,
1298 * so we may pass a useless variable to store the value.
1300 rt73usb_register_read(rt2x00dev
, STA_CSR0
, ®
);
1301 rt73usb_register_read(rt2x00dev
, STA_CSR1
, ®
);
1302 rt73usb_register_read(rt2x00dev
, STA_CSR2
, ®
);
1305 * Reset MAC and BBP registers.
1307 rt73usb_register_read(rt2x00dev
, MAC_CSR1
, ®
);
1308 rt2x00_set_field32(®
, MAC_CSR1_SOFT_RESET
, 1);
1309 rt2x00_set_field32(®
, MAC_CSR1_BBP_RESET
, 1);
1310 rt73usb_register_write(rt2x00dev
, MAC_CSR1
, reg
);
1312 rt73usb_register_read(rt2x00dev
, MAC_CSR1
, ®
);
1313 rt2x00_set_field32(®
, MAC_CSR1_SOFT_RESET
, 0);
1314 rt2x00_set_field32(®
, MAC_CSR1_BBP_RESET
, 0);
1315 rt73usb_register_write(rt2x00dev
, MAC_CSR1
, reg
);
1317 rt73usb_register_read(rt2x00dev
, MAC_CSR1
, ®
);
1318 rt2x00_set_field32(®
, MAC_CSR1_HOST_READY
, 1);
1319 rt73usb_register_write(rt2x00dev
, MAC_CSR1
, reg
);
1324 static int rt73usb_wait_bbp_ready(struct rt2x00_dev
*rt2x00dev
)
1329 for (i
= 0; i
< REGISTER_BUSY_COUNT
; i
++) {
1330 rt73usb_bbp_read(rt2x00dev
, 0, &value
);
1331 if ((value
!= 0xff) && (value
!= 0x00))
1333 udelay(REGISTER_BUSY_DELAY
);
1336 ERROR(rt2x00dev
, "BBP register access failed, aborting.\n");
1340 static int rt73usb_init_bbp(struct rt2x00_dev
*rt2x00dev
)
1347 if (unlikely(rt73usb_wait_bbp_ready(rt2x00dev
)))
1350 rt73usb_bbp_write(rt2x00dev
, 3, 0x80);
1351 rt73usb_bbp_write(rt2x00dev
, 15, 0x30);
1352 rt73usb_bbp_write(rt2x00dev
, 21, 0xc8);
1353 rt73usb_bbp_write(rt2x00dev
, 22, 0x38);
1354 rt73usb_bbp_write(rt2x00dev
, 23, 0x06);
1355 rt73usb_bbp_write(rt2x00dev
, 24, 0xfe);
1356 rt73usb_bbp_write(rt2x00dev
, 25, 0x0a);
1357 rt73usb_bbp_write(rt2x00dev
, 26, 0x0d);
1358 rt73usb_bbp_write(rt2x00dev
, 32, 0x0b);
1359 rt73usb_bbp_write(rt2x00dev
, 34, 0x12);
1360 rt73usb_bbp_write(rt2x00dev
, 37, 0x07);
1361 rt73usb_bbp_write(rt2x00dev
, 39, 0xf8);
1362 rt73usb_bbp_write(rt2x00dev
, 41, 0x60);
1363 rt73usb_bbp_write(rt2x00dev
, 53, 0x10);
1364 rt73usb_bbp_write(rt2x00dev
, 54, 0x18);
1365 rt73usb_bbp_write(rt2x00dev
, 60, 0x10);
1366 rt73usb_bbp_write(rt2x00dev
, 61, 0x04);
1367 rt73usb_bbp_write(rt2x00dev
, 62, 0x04);
1368 rt73usb_bbp_write(rt2x00dev
, 75, 0xfe);
1369 rt73usb_bbp_write(rt2x00dev
, 86, 0xfe);
1370 rt73usb_bbp_write(rt2x00dev
, 88, 0xfe);
1371 rt73usb_bbp_write(rt2x00dev
, 90, 0x0f);
1372 rt73usb_bbp_write(rt2x00dev
, 99, 0x00);
1373 rt73usb_bbp_write(rt2x00dev
, 102, 0x16);
1374 rt73usb_bbp_write(rt2x00dev
, 107, 0x04);
1376 for (i
= 0; i
< EEPROM_BBP_SIZE
; i
++) {
1377 rt2x00_eeprom_read(rt2x00dev
, EEPROM_BBP_START
+ i
, &eeprom
);
1379 if (eeprom
!= 0xffff && eeprom
!= 0x0000) {
1380 reg_id
= rt2x00_get_field16(eeprom
, EEPROM_BBP_REG_ID
);
1381 value
= rt2x00_get_field16(eeprom
, EEPROM_BBP_VALUE
);
1382 rt73usb_bbp_write(rt2x00dev
, reg_id
, value
);
1390 * Device state switch handlers.
1392 static void rt73usb_toggle_rx(struct rt2x00_dev
*rt2x00dev
,
1393 enum dev_state state
)
1397 rt73usb_register_read(rt2x00dev
, TXRX_CSR0
, ®
);
1398 rt2x00_set_field32(®
, TXRX_CSR0_DISABLE_RX
,
1399 (state
== STATE_RADIO_RX_OFF
) ||
1400 (state
== STATE_RADIO_RX_OFF_LINK
));
1401 rt73usb_register_write(rt2x00dev
, TXRX_CSR0
, reg
);
1404 static int rt73usb_enable_radio(struct rt2x00_dev
*rt2x00dev
)
1407 * Initialize all registers.
1409 if (unlikely(rt73usb_init_registers(rt2x00dev
) ||
1410 rt73usb_init_bbp(rt2x00dev
)))
1416 static void rt73usb_disable_radio(struct rt2x00_dev
*rt2x00dev
)
1418 rt73usb_register_write(rt2x00dev
, MAC_CSR10
, 0x00001818);
1421 * Disable synchronisation.
1423 rt73usb_register_write(rt2x00dev
, TXRX_CSR9
, 0);
1425 rt2x00usb_disable_radio(rt2x00dev
);
1428 static int rt73usb_set_state(struct rt2x00_dev
*rt2x00dev
, enum dev_state state
)
1434 put_to_sleep
= (state
!= STATE_AWAKE
);
1436 rt73usb_register_read(rt2x00dev
, MAC_CSR12
, ®
);
1437 rt2x00_set_field32(®
, MAC_CSR12_FORCE_WAKEUP
, !put_to_sleep
);
1438 rt2x00_set_field32(®
, MAC_CSR12_PUT_TO_SLEEP
, put_to_sleep
);
1439 rt73usb_register_write(rt2x00dev
, MAC_CSR12
, reg
);
1442 * Device is not guaranteed to be in the requested state yet.
1443 * We must wait until the register indicates that the
1444 * device has entered the correct state.
1446 for (i
= 0; i
< REGISTER_BUSY_COUNT
; i
++) {
1447 rt73usb_register_read(rt2x00dev
, MAC_CSR12
, ®
);
1448 state
= rt2x00_get_field32(reg
, MAC_CSR12_BBP_CURRENT_STATE
);
1449 if (state
== !put_to_sleep
)
1457 static int rt73usb_set_device_state(struct rt2x00_dev
*rt2x00dev
,
1458 enum dev_state state
)
1463 case STATE_RADIO_ON
:
1464 retval
= rt73usb_enable_radio(rt2x00dev
);
1466 case STATE_RADIO_OFF
:
1467 rt73usb_disable_radio(rt2x00dev
);
1469 case STATE_RADIO_RX_ON
:
1470 case STATE_RADIO_RX_ON_LINK
:
1471 case STATE_RADIO_RX_OFF
:
1472 case STATE_RADIO_RX_OFF_LINK
:
1473 rt73usb_toggle_rx(rt2x00dev
, state
);
1475 case STATE_RADIO_IRQ_ON
:
1476 case STATE_RADIO_IRQ_OFF
:
1477 /* No support, but no error either */
1479 case STATE_DEEP_SLEEP
:
1483 retval
= rt73usb_set_state(rt2x00dev
, state
);
1490 if (unlikely(retval
))
1491 ERROR(rt2x00dev
, "Device failed to enter state %d (%d).\n",
1498 * TX descriptor initialization
1500 static void rt73usb_write_tx_desc(struct rt2x00_dev
*rt2x00dev
,
1501 struct sk_buff
*skb
,
1502 struct txentry_desc
*txdesc
)
1504 struct skb_frame_desc
*skbdesc
= get_skb_frame_desc(skb
);
1505 __le32
*txd
= skbdesc
->desc
;
1509 * Start writing the descriptor words.
1511 rt2x00_desc_read(txd
, 1, &word
);
1512 rt2x00_set_field32(&word
, TXD_W1_HOST_Q_ID
, txdesc
->queue
);
1513 rt2x00_set_field32(&word
, TXD_W1_AIFSN
, txdesc
->aifs
);
1514 rt2x00_set_field32(&word
, TXD_W1_CWMIN
, txdesc
->cw_min
);
1515 rt2x00_set_field32(&word
, TXD_W1_CWMAX
, txdesc
->cw_max
);
1516 rt2x00_set_field32(&word
, TXD_W1_IV_OFFSET
, txdesc
->iv_offset
);
1517 rt2x00_set_field32(&word
, TXD_W1_HW_SEQUENCE
,
1518 test_bit(ENTRY_TXD_GENERATE_SEQ
, &txdesc
->flags
));
1519 rt2x00_desc_write(txd
, 1, word
);
1521 rt2x00_desc_read(txd
, 2, &word
);
1522 rt2x00_set_field32(&word
, TXD_W2_PLCP_SIGNAL
, txdesc
->signal
);
1523 rt2x00_set_field32(&word
, TXD_W2_PLCP_SERVICE
, txdesc
->service
);
1524 rt2x00_set_field32(&word
, TXD_W2_PLCP_LENGTH_LOW
, txdesc
->length_low
);
1525 rt2x00_set_field32(&word
, TXD_W2_PLCP_LENGTH_HIGH
, txdesc
->length_high
);
1526 rt2x00_desc_write(txd
, 2, word
);
1528 if (test_bit(ENTRY_TXD_ENCRYPT
, &txdesc
->flags
)) {
1529 _rt2x00_desc_write(txd
, 3, skbdesc
->iv
);
1530 _rt2x00_desc_write(txd
, 4, skbdesc
->eiv
);
1533 rt2x00_desc_read(txd
, 5, &word
);
1534 rt2x00_set_field32(&word
, TXD_W5_TX_POWER
,
1535 TXPOWER_TO_DEV(rt2x00dev
->tx_power
));
1536 rt2x00_set_field32(&word
, TXD_W5_WAITING_DMA_DONE_INT
, 1);
1537 rt2x00_desc_write(txd
, 5, word
);
1539 rt2x00_desc_read(txd
, 0, &word
);
1540 rt2x00_set_field32(&word
, TXD_W0_BURST
,
1541 test_bit(ENTRY_TXD_BURST
, &txdesc
->flags
));
1542 rt2x00_set_field32(&word
, TXD_W0_VALID
, 1);
1543 rt2x00_set_field32(&word
, TXD_W0_MORE_FRAG
,
1544 test_bit(ENTRY_TXD_MORE_FRAG
, &txdesc
->flags
));
1545 rt2x00_set_field32(&word
, TXD_W0_ACK
,
1546 test_bit(ENTRY_TXD_ACK
, &txdesc
->flags
));
1547 rt2x00_set_field32(&word
, TXD_W0_TIMESTAMP
,
1548 test_bit(ENTRY_TXD_REQ_TIMESTAMP
, &txdesc
->flags
));
1549 rt2x00_set_field32(&word
, TXD_W0_OFDM
,
1550 test_bit(ENTRY_TXD_OFDM_RATE
, &txdesc
->flags
));
1551 rt2x00_set_field32(&word
, TXD_W0_IFS
, txdesc
->ifs
);
1552 rt2x00_set_field32(&word
, TXD_W0_RETRY_MODE
,
1553 test_bit(ENTRY_TXD_RETRY_MODE
, &txdesc
->flags
));
1554 rt2x00_set_field32(&word
, TXD_W0_TKIP_MIC
,
1555 test_bit(ENTRY_TXD_ENCRYPT_MMIC
, &txdesc
->flags
));
1556 rt2x00_set_field32(&word
, TXD_W0_KEY_TABLE
,
1557 test_bit(ENTRY_TXD_ENCRYPT_PAIRWISE
, &txdesc
->flags
));
1558 rt2x00_set_field32(&word
, TXD_W0_KEY_INDEX
, txdesc
->key_idx
);
1559 rt2x00_set_field32(&word
, TXD_W0_DATABYTE_COUNT
, skb
->len
);
1560 rt2x00_set_field32(&word
, TXD_W0_BURST2
,
1561 test_bit(ENTRY_TXD_BURST
, &txdesc
->flags
));
1562 rt2x00_set_field32(&word
, TXD_W0_CIPHER_ALG
, txdesc
->cipher
);
1563 rt2x00_desc_write(txd
, 0, word
);
1567 * TX data initialization
1569 static void rt73usb_write_beacon(struct queue_entry
*entry
)
1571 struct rt2x00_dev
*rt2x00dev
= entry
->queue
->rt2x00dev
;
1572 struct skb_frame_desc
*skbdesc
= get_skb_frame_desc(entry
->skb
);
1573 unsigned int beacon_base
;
1577 * Add the descriptor in front of the skb.
1579 skb_push(entry
->skb
, entry
->queue
->desc_size
);
1580 memcpy(entry
->skb
->data
, skbdesc
->desc
, skbdesc
->desc_len
);
1581 skbdesc
->desc
= entry
->skb
->data
;
1584 * Disable beaconing while we are reloading the beacon data,
1585 * otherwise we might be sending out invalid data.
1587 rt73usb_register_read(rt2x00dev
, TXRX_CSR9
, ®
);
1588 rt2x00_set_field32(®
, TXRX_CSR9_TSF_TICKING
, 0);
1589 rt2x00_set_field32(®
, TXRX_CSR9_TBTT_ENABLE
, 0);
1590 rt2x00_set_field32(®
, TXRX_CSR9_BEACON_GEN
, 0);
1591 rt73usb_register_write(rt2x00dev
, TXRX_CSR9
, reg
);
1594 * Write entire beacon with descriptor to register.
1596 beacon_base
= HW_BEACON_OFFSET(entry
->entry_idx
);
1597 rt2x00usb_vendor_request_large_buff(rt2x00dev
, USB_MULTI_WRITE
,
1598 USB_VENDOR_REQUEST_OUT
, beacon_base
,
1599 entry
->skb
->data
, entry
->skb
->len
,
1600 REGISTER_TIMEOUT32(entry
->skb
->len
));
1603 * Clean up the beacon skb.
1605 dev_kfree_skb(entry
->skb
);
1609 static int rt73usb_get_tx_data_len(struct rt2x00_dev
*rt2x00dev
,
1610 struct sk_buff
*skb
)
1615 * The length _must_ be a multiple of 4,
1616 * but it must _not_ be a multiple of the USB packet size.
1618 length
= roundup(skb
->len
, 4);
1619 length
+= (4 * !(length
% rt2x00dev
->usb_maxpacket
));
1624 static void rt73usb_kick_tx_queue(struct rt2x00_dev
*rt2x00dev
,
1625 const enum data_queue_qid queue
)
1629 if (queue
!= QID_BEACON
) {
1630 rt2x00usb_kick_tx_queue(rt2x00dev
, queue
);
1635 * For Wi-Fi faily generated beacons between participating stations.
1636 * Set TBTT phase adaptive adjustment step to 8us (default 16us)
1638 rt73usb_register_write(rt2x00dev
, TXRX_CSR10
, 0x00001008);
1640 rt73usb_register_read(rt2x00dev
, TXRX_CSR9
, ®
);
1641 if (!rt2x00_get_field32(reg
, TXRX_CSR9_BEACON_GEN
)) {
1642 rt2x00_set_field32(®
, TXRX_CSR9_TSF_TICKING
, 1);
1643 rt2x00_set_field32(®
, TXRX_CSR9_TBTT_ENABLE
, 1);
1644 rt2x00_set_field32(®
, TXRX_CSR9_BEACON_GEN
, 1);
1645 rt73usb_register_write(rt2x00dev
, TXRX_CSR9
, reg
);
1650 * RX control handlers
1652 static int rt73usb_agc_to_rssi(struct rt2x00_dev
*rt2x00dev
, int rxd_w1
)
1654 u8 offset
= rt2x00dev
->lna_gain
;
1657 lna
= rt2x00_get_field32(rxd_w1
, RXD_W1_RSSI_LNA
);
1672 if (rt2x00dev
->rx_status
.band
== IEEE80211_BAND_5GHZ
) {
1673 if (test_bit(CONFIG_EXTERNAL_LNA_A
, &rt2x00dev
->flags
)) {
1674 if (lna
== 3 || lna
== 2)
1684 return rt2x00_get_field32(rxd_w1
, RXD_W1_RSSI_AGC
) * 2 - offset
;
1687 static void rt73usb_fill_rxdone(struct queue_entry
*entry
,
1688 struct rxdone_entry_desc
*rxdesc
)
1690 struct rt2x00_dev
*rt2x00dev
= entry
->queue
->rt2x00dev
;
1691 struct skb_frame_desc
*skbdesc
= get_skb_frame_desc(entry
->skb
);
1692 __le32
*rxd
= (__le32
*)entry
->skb
->data
;
1697 * Copy descriptor to the skbdesc->desc buffer, making it safe from moving of
1698 * frame data in rt2x00usb.
1700 memcpy(skbdesc
->desc
, rxd
, skbdesc
->desc_len
);
1701 rxd
= (__le32
*)skbdesc
->desc
;
1704 * It is now safe to read the descriptor on all architectures.
1706 rt2x00_desc_read(rxd
, 0, &word0
);
1707 rt2x00_desc_read(rxd
, 1, &word1
);
1709 if (rt2x00_get_field32(word0
, RXD_W0_CRC_ERROR
))
1710 rxdesc
->flags
|= RX_FLAG_FAILED_FCS_CRC
;
1712 if (test_bit(CONFIG_SUPPORT_HW_CRYPTO
, &rt2x00dev
->flags
)) {
1714 rt2x00_get_field32(word0
, RXD_W0_CIPHER_ALG
);
1715 rxdesc
->cipher_status
=
1716 rt2x00_get_field32(word0
, RXD_W0_CIPHER_ERROR
);
1719 if (rxdesc
->cipher
!= CIPHER_NONE
) {
1720 _rt2x00_desc_read(rxd
, 2, &rxdesc
->iv
);
1721 _rt2x00_desc_read(rxd
, 3, &rxdesc
->eiv
);
1722 _rt2x00_desc_read(rxd
, 4, &rxdesc
->icv
);
1725 * Hardware has stripped IV/EIV data from 802.11 frame during
1726 * decryption. It has provided the data seperately but rt2x00lib
1727 * should decide if it should be reinserted.
1729 rxdesc
->flags
|= RX_FLAG_IV_STRIPPED
;
1732 * FIXME: Legacy driver indicates that the frame does
1733 * contain the Michael Mic. Unfortunately, in rt2x00
1734 * the MIC seems to be missing completely...
1736 rxdesc
->flags
|= RX_FLAG_MMIC_STRIPPED
;
1738 if (rxdesc
->cipher_status
== RX_CRYPTO_SUCCESS
)
1739 rxdesc
->flags
|= RX_FLAG_DECRYPTED
;
1740 else if (rxdesc
->cipher_status
== RX_CRYPTO_FAIL_MIC
)
1741 rxdesc
->flags
|= RX_FLAG_MMIC_ERROR
;
1745 * Obtain the status about this packet.
1746 * When frame was received with an OFDM bitrate,
1747 * the signal is the PLCP value. If it was received with
1748 * a CCK bitrate the signal is the rate in 100kbit/s.
1750 rxdesc
->signal
= rt2x00_get_field32(word1
, RXD_W1_SIGNAL
);
1751 rxdesc
->rssi
= rt73usb_agc_to_rssi(rt2x00dev
, word1
);
1752 rxdesc
->size
= rt2x00_get_field32(word0
, RXD_W0_DATABYTE_COUNT
);
1754 if (rt2x00_get_field32(word0
, RXD_W0_OFDM
))
1755 rxdesc
->dev_flags
|= RXDONE_SIGNAL_PLCP
;
1757 rxdesc
->dev_flags
|= RXDONE_SIGNAL_BITRATE
;
1758 if (rt2x00_get_field32(word0
, RXD_W0_MY_BSS
))
1759 rxdesc
->dev_flags
|= RXDONE_MY_BSS
;
1762 * Set skb pointers, and update frame information.
1764 skb_pull(entry
->skb
, entry
->queue
->desc_size
);
1765 skb_trim(entry
->skb
, rxdesc
->size
);
1769 * Device probe functions.
1771 static int rt73usb_validate_eeprom(struct rt2x00_dev
*rt2x00dev
)
1777 rt2x00usb_eeprom_read(rt2x00dev
, rt2x00dev
->eeprom
, EEPROM_SIZE
);
1780 * Start validation of the data that has been read.
1782 mac
= rt2x00_eeprom_addr(rt2x00dev
, EEPROM_MAC_ADDR_0
);
1783 if (!is_valid_ether_addr(mac
)) {
1784 random_ether_addr(mac
);
1785 EEPROM(rt2x00dev
, "MAC: %pM\n", mac
);
1788 rt2x00_eeprom_read(rt2x00dev
, EEPROM_ANTENNA
, &word
);
1789 if (word
== 0xffff) {
1790 rt2x00_set_field16(&word
, EEPROM_ANTENNA_NUM
, 2);
1791 rt2x00_set_field16(&word
, EEPROM_ANTENNA_TX_DEFAULT
,
1793 rt2x00_set_field16(&word
, EEPROM_ANTENNA_RX_DEFAULT
,
1795 rt2x00_set_field16(&word
, EEPROM_ANTENNA_FRAME_TYPE
, 0);
1796 rt2x00_set_field16(&word
, EEPROM_ANTENNA_DYN_TXAGC
, 0);
1797 rt2x00_set_field16(&word
, EEPROM_ANTENNA_HARDWARE_RADIO
, 0);
1798 rt2x00_set_field16(&word
, EEPROM_ANTENNA_RF_TYPE
, RF5226
);
1799 rt2x00_eeprom_write(rt2x00dev
, EEPROM_ANTENNA
, word
);
1800 EEPROM(rt2x00dev
, "Antenna: 0x%04x\n", word
);
1803 rt2x00_eeprom_read(rt2x00dev
, EEPROM_NIC
, &word
);
1804 if (word
== 0xffff) {
1805 rt2x00_set_field16(&word
, EEPROM_NIC_EXTERNAL_LNA
, 0);
1806 rt2x00_eeprom_write(rt2x00dev
, EEPROM_NIC
, word
);
1807 EEPROM(rt2x00dev
, "NIC: 0x%04x\n", word
);
1810 rt2x00_eeprom_read(rt2x00dev
, EEPROM_LED
, &word
);
1811 if (word
== 0xffff) {
1812 rt2x00_set_field16(&word
, EEPROM_LED_POLARITY_RDY_G
, 0);
1813 rt2x00_set_field16(&word
, EEPROM_LED_POLARITY_RDY_A
, 0);
1814 rt2x00_set_field16(&word
, EEPROM_LED_POLARITY_ACT
, 0);
1815 rt2x00_set_field16(&word
, EEPROM_LED_POLARITY_GPIO_0
, 0);
1816 rt2x00_set_field16(&word
, EEPROM_LED_POLARITY_GPIO_1
, 0);
1817 rt2x00_set_field16(&word
, EEPROM_LED_POLARITY_GPIO_2
, 0);
1818 rt2x00_set_field16(&word
, EEPROM_LED_POLARITY_GPIO_3
, 0);
1819 rt2x00_set_field16(&word
, EEPROM_LED_POLARITY_GPIO_4
, 0);
1820 rt2x00_set_field16(&word
, EEPROM_LED_LED_MODE
,
1822 rt2x00_eeprom_write(rt2x00dev
, EEPROM_LED
, word
);
1823 EEPROM(rt2x00dev
, "Led: 0x%04x\n", word
);
1826 rt2x00_eeprom_read(rt2x00dev
, EEPROM_FREQ
, &word
);
1827 if (word
== 0xffff) {
1828 rt2x00_set_field16(&word
, EEPROM_FREQ_OFFSET
, 0);
1829 rt2x00_set_field16(&word
, EEPROM_FREQ_SEQ
, 0);
1830 rt2x00_eeprom_write(rt2x00dev
, EEPROM_FREQ
, word
);
1831 EEPROM(rt2x00dev
, "Freq: 0x%04x\n", word
);
1834 rt2x00_eeprom_read(rt2x00dev
, EEPROM_RSSI_OFFSET_BG
, &word
);
1835 if (word
== 0xffff) {
1836 rt2x00_set_field16(&word
, EEPROM_RSSI_OFFSET_BG_1
, 0);
1837 rt2x00_set_field16(&word
, EEPROM_RSSI_OFFSET_BG_2
, 0);
1838 rt2x00_eeprom_write(rt2x00dev
, EEPROM_RSSI_OFFSET_BG
, word
);
1839 EEPROM(rt2x00dev
, "RSSI OFFSET BG: 0x%04x\n", word
);
1841 value
= rt2x00_get_field16(word
, EEPROM_RSSI_OFFSET_BG_1
);
1842 if (value
< -10 || value
> 10)
1843 rt2x00_set_field16(&word
, EEPROM_RSSI_OFFSET_BG_1
, 0);
1844 value
= rt2x00_get_field16(word
, EEPROM_RSSI_OFFSET_BG_2
);
1845 if (value
< -10 || value
> 10)
1846 rt2x00_set_field16(&word
, EEPROM_RSSI_OFFSET_BG_2
, 0);
1847 rt2x00_eeprom_write(rt2x00dev
, EEPROM_RSSI_OFFSET_BG
, word
);
1850 rt2x00_eeprom_read(rt2x00dev
, EEPROM_RSSI_OFFSET_A
, &word
);
1851 if (word
== 0xffff) {
1852 rt2x00_set_field16(&word
, EEPROM_RSSI_OFFSET_A_1
, 0);
1853 rt2x00_set_field16(&word
, EEPROM_RSSI_OFFSET_A_2
, 0);
1854 rt2x00_eeprom_write(rt2x00dev
, EEPROM_RSSI_OFFSET_A
, word
);
1855 EEPROM(rt2x00dev
, "RSSI OFFSET A: 0x%04x\n", word
);
1857 value
= rt2x00_get_field16(word
, EEPROM_RSSI_OFFSET_A_1
);
1858 if (value
< -10 || value
> 10)
1859 rt2x00_set_field16(&word
, EEPROM_RSSI_OFFSET_A_1
, 0);
1860 value
= rt2x00_get_field16(word
, EEPROM_RSSI_OFFSET_A_2
);
1861 if (value
< -10 || value
> 10)
1862 rt2x00_set_field16(&word
, EEPROM_RSSI_OFFSET_A_2
, 0);
1863 rt2x00_eeprom_write(rt2x00dev
, EEPROM_RSSI_OFFSET_A
, word
);
1869 static int rt73usb_init_eeprom(struct rt2x00_dev
*rt2x00dev
)
1876 * Read EEPROM word for configuration.
1878 rt2x00_eeprom_read(rt2x00dev
, EEPROM_ANTENNA
, &eeprom
);
1881 * Identify RF chipset.
1883 value
= rt2x00_get_field16(eeprom
, EEPROM_ANTENNA_RF_TYPE
);
1884 rt73usb_register_read(rt2x00dev
, MAC_CSR0
, ®
);
1885 rt2x00_set_chip(rt2x00dev
, RT2571
, value
, reg
);
1887 if (!rt2x00_check_rev(&rt2x00dev
->chip
, 0x25730)) {
1888 ERROR(rt2x00dev
, "Invalid RT chipset detected.\n");
1892 if (!rt2x00_rf(&rt2x00dev
->chip
, RF5226
) &&
1893 !rt2x00_rf(&rt2x00dev
->chip
, RF2528
) &&
1894 !rt2x00_rf(&rt2x00dev
->chip
, RF5225
) &&
1895 !rt2x00_rf(&rt2x00dev
->chip
, RF2527
)) {
1896 ERROR(rt2x00dev
, "Invalid RF chipset detected.\n");
1901 * Identify default antenna configuration.
1903 rt2x00dev
->default_ant
.tx
=
1904 rt2x00_get_field16(eeprom
, EEPROM_ANTENNA_TX_DEFAULT
);
1905 rt2x00dev
->default_ant
.rx
=
1906 rt2x00_get_field16(eeprom
, EEPROM_ANTENNA_RX_DEFAULT
);
1909 * Read the Frame type.
1911 if (rt2x00_get_field16(eeprom
, EEPROM_ANTENNA_FRAME_TYPE
))
1912 __set_bit(CONFIG_FRAME_TYPE
, &rt2x00dev
->flags
);
1915 * Read frequency offset.
1917 rt2x00_eeprom_read(rt2x00dev
, EEPROM_FREQ
, &eeprom
);
1918 rt2x00dev
->freq_offset
= rt2x00_get_field16(eeprom
, EEPROM_FREQ_OFFSET
);
1921 * Read external LNA informations.
1923 rt2x00_eeprom_read(rt2x00dev
, EEPROM_NIC
, &eeprom
);
1925 if (rt2x00_get_field16(eeprom
, EEPROM_NIC_EXTERNAL_LNA
)) {
1926 __set_bit(CONFIG_EXTERNAL_LNA_A
, &rt2x00dev
->flags
);
1927 __set_bit(CONFIG_EXTERNAL_LNA_BG
, &rt2x00dev
->flags
);
1931 * Store led settings, for correct led behaviour.
1933 #ifdef CONFIG_RT2X00_LIB_LEDS
1934 rt2x00_eeprom_read(rt2x00dev
, EEPROM_LED
, &eeprom
);
1936 rt73usb_init_led(rt2x00dev
, &rt2x00dev
->led_radio
, LED_TYPE_RADIO
);
1937 rt73usb_init_led(rt2x00dev
, &rt2x00dev
->led_assoc
, LED_TYPE_ASSOC
);
1938 if (value
== LED_MODE_SIGNAL_STRENGTH
)
1939 rt73usb_init_led(rt2x00dev
, &rt2x00dev
->led_qual
,
1942 rt2x00_set_field16(&rt2x00dev
->led_mcu_reg
, MCU_LEDCS_LED_MODE
, value
);
1943 rt2x00_set_field16(&rt2x00dev
->led_mcu_reg
, MCU_LEDCS_POLARITY_GPIO_0
,
1944 rt2x00_get_field16(eeprom
,
1945 EEPROM_LED_POLARITY_GPIO_0
));
1946 rt2x00_set_field16(&rt2x00dev
->led_mcu_reg
, MCU_LEDCS_POLARITY_GPIO_1
,
1947 rt2x00_get_field16(eeprom
,
1948 EEPROM_LED_POLARITY_GPIO_1
));
1949 rt2x00_set_field16(&rt2x00dev
->led_mcu_reg
, MCU_LEDCS_POLARITY_GPIO_2
,
1950 rt2x00_get_field16(eeprom
,
1951 EEPROM_LED_POLARITY_GPIO_2
));
1952 rt2x00_set_field16(&rt2x00dev
->led_mcu_reg
, MCU_LEDCS_POLARITY_GPIO_3
,
1953 rt2x00_get_field16(eeprom
,
1954 EEPROM_LED_POLARITY_GPIO_3
));
1955 rt2x00_set_field16(&rt2x00dev
->led_mcu_reg
, MCU_LEDCS_POLARITY_GPIO_4
,
1956 rt2x00_get_field16(eeprom
,
1957 EEPROM_LED_POLARITY_GPIO_4
));
1958 rt2x00_set_field16(&rt2x00dev
->led_mcu_reg
, MCU_LEDCS_POLARITY_ACT
,
1959 rt2x00_get_field16(eeprom
, EEPROM_LED_POLARITY_ACT
));
1960 rt2x00_set_field16(&rt2x00dev
->led_mcu_reg
, MCU_LEDCS_POLARITY_READY_BG
,
1961 rt2x00_get_field16(eeprom
,
1962 EEPROM_LED_POLARITY_RDY_G
));
1963 rt2x00_set_field16(&rt2x00dev
->led_mcu_reg
, MCU_LEDCS_POLARITY_READY_A
,
1964 rt2x00_get_field16(eeprom
,
1965 EEPROM_LED_POLARITY_RDY_A
));
1966 #endif /* CONFIG_RT2X00_LIB_LEDS */
1972 * RF value list for RF2528
1975 static const struct rf_channel rf_vals_bg_2528
[] = {
1976 { 1, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea0b },
1977 { 2, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea1f },
1978 { 3, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea0b },
1979 { 4, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea1f },
1980 { 5, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea0b },
1981 { 6, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea1f },
1982 { 7, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea0b },
1983 { 8, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea1f },
1984 { 9, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea0b },
1985 { 10, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea1f },
1986 { 11, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea0b },
1987 { 12, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea1f },
1988 { 13, 0x00002c0c, 0x0000079e, 0x00068255, 0x000fea0b },
1989 { 14, 0x00002c0c, 0x000007a2, 0x00068255, 0x000fea13 },
1993 * RF value list for RF5226
1994 * Supports: 2.4 GHz & 5.2 GHz
1996 static const struct rf_channel rf_vals_5226
[] = {
1997 { 1, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea0b },
1998 { 2, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea1f },
1999 { 3, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea0b },
2000 { 4, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea1f },
2001 { 5, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea0b },
2002 { 6, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea1f },
2003 { 7, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea0b },
2004 { 8, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea1f },
2005 { 9, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea0b },
2006 { 10, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea1f },
2007 { 11, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea0b },
2008 { 12, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea1f },
2009 { 13, 0x00002c0c, 0x0000079e, 0x00068255, 0x000fea0b },
2010 { 14, 0x00002c0c, 0x000007a2, 0x00068255, 0x000fea13 },
2012 /* 802.11 UNI / HyperLan 2 */
2013 { 36, 0x00002c0c, 0x0000099a, 0x00098255, 0x000fea23 },
2014 { 40, 0x00002c0c, 0x000009a2, 0x00098255, 0x000fea03 },
2015 { 44, 0x00002c0c, 0x000009a6, 0x00098255, 0x000fea0b },
2016 { 48, 0x00002c0c, 0x000009aa, 0x00098255, 0x000fea13 },
2017 { 52, 0x00002c0c, 0x000009ae, 0x00098255, 0x000fea1b },
2018 { 56, 0x00002c0c, 0x000009b2, 0x00098255, 0x000fea23 },
2019 { 60, 0x00002c0c, 0x000009ba, 0x00098255, 0x000fea03 },
2020 { 64, 0x00002c0c, 0x000009be, 0x00098255, 0x000fea0b },
2022 /* 802.11 HyperLan 2 */
2023 { 100, 0x00002c0c, 0x00000a2a, 0x000b8255, 0x000fea03 },
2024 { 104, 0x00002c0c, 0x00000a2e, 0x000b8255, 0x000fea0b },
2025 { 108, 0x00002c0c, 0x00000a32, 0x000b8255, 0x000fea13 },
2026 { 112, 0x00002c0c, 0x00000a36, 0x000b8255, 0x000fea1b },
2027 { 116, 0x00002c0c, 0x00000a3a, 0x000b8255, 0x000fea23 },
2028 { 120, 0x00002c0c, 0x00000a82, 0x000b8255, 0x000fea03 },
2029 { 124, 0x00002c0c, 0x00000a86, 0x000b8255, 0x000fea0b },
2030 { 128, 0x00002c0c, 0x00000a8a, 0x000b8255, 0x000fea13 },
2031 { 132, 0x00002c0c, 0x00000a8e, 0x000b8255, 0x000fea1b },
2032 { 136, 0x00002c0c, 0x00000a92, 0x000b8255, 0x000fea23 },
2035 { 140, 0x00002c0c, 0x00000a9a, 0x000b8255, 0x000fea03 },
2036 { 149, 0x00002c0c, 0x00000aa2, 0x000b8255, 0x000fea1f },
2037 { 153, 0x00002c0c, 0x00000aa6, 0x000b8255, 0x000fea27 },
2038 { 157, 0x00002c0c, 0x00000aae, 0x000b8255, 0x000fea07 },
2039 { 161, 0x00002c0c, 0x00000ab2, 0x000b8255, 0x000fea0f },
2040 { 165, 0x00002c0c, 0x00000ab6, 0x000b8255, 0x000fea17 },
2042 /* MMAC(Japan)J52 ch 34,38,42,46 */
2043 { 34, 0x00002c0c, 0x0008099a, 0x000da255, 0x000d3a0b },
2044 { 38, 0x00002c0c, 0x0008099e, 0x000da255, 0x000d3a13 },
2045 { 42, 0x00002c0c, 0x000809a2, 0x000da255, 0x000d3a1b },
2046 { 46, 0x00002c0c, 0x000809a6, 0x000da255, 0x000d3a23 },
2050 * RF value list for RF5225 & RF2527
2051 * Supports: 2.4 GHz & 5.2 GHz
2053 static const struct rf_channel rf_vals_5225_2527
[] = {
2054 { 1, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b },
2055 { 2, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f },
2056 { 3, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b },
2057 { 4, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f },
2058 { 5, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b },
2059 { 6, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f },
2060 { 7, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b },
2061 { 8, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f },
2062 { 9, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b },
2063 { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f },
2064 { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b },
2065 { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f },
2066 { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b },
2067 { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 },
2069 /* 802.11 UNI / HyperLan 2 */
2070 { 36, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa23 },
2071 { 40, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa03 },
2072 { 44, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa0b },
2073 { 48, 0x00002ccc, 0x000049aa, 0x0009be55, 0x000ffa13 },
2074 { 52, 0x00002ccc, 0x000049ae, 0x0009ae55, 0x000ffa1b },
2075 { 56, 0x00002ccc, 0x000049b2, 0x0009ae55, 0x000ffa23 },
2076 { 60, 0x00002ccc, 0x000049ba, 0x0009ae55, 0x000ffa03 },
2077 { 64, 0x00002ccc, 0x000049be, 0x0009ae55, 0x000ffa0b },
2079 /* 802.11 HyperLan 2 */
2080 { 100, 0x00002ccc, 0x00004a2a, 0x000bae55, 0x000ffa03 },
2081 { 104, 0x00002ccc, 0x00004a2e, 0x000bae55, 0x000ffa0b },
2082 { 108, 0x00002ccc, 0x00004a32, 0x000bae55, 0x000ffa13 },
2083 { 112, 0x00002ccc, 0x00004a36, 0x000bae55, 0x000ffa1b },
2084 { 116, 0x00002ccc, 0x00004a3a, 0x000bbe55, 0x000ffa23 },
2085 { 120, 0x00002ccc, 0x00004a82, 0x000bbe55, 0x000ffa03 },
2086 { 124, 0x00002ccc, 0x00004a86, 0x000bbe55, 0x000ffa0b },
2087 { 128, 0x00002ccc, 0x00004a8a, 0x000bbe55, 0x000ffa13 },
2088 { 132, 0x00002ccc, 0x00004a8e, 0x000bbe55, 0x000ffa1b },
2089 { 136, 0x00002ccc, 0x00004a92, 0x000bbe55, 0x000ffa23 },
2092 { 140, 0x00002ccc, 0x00004a9a, 0x000bbe55, 0x000ffa03 },
2093 { 149, 0x00002ccc, 0x00004aa2, 0x000bbe55, 0x000ffa1f },
2094 { 153, 0x00002ccc, 0x00004aa6, 0x000bbe55, 0x000ffa27 },
2095 { 157, 0x00002ccc, 0x00004aae, 0x000bbe55, 0x000ffa07 },
2096 { 161, 0x00002ccc, 0x00004ab2, 0x000bbe55, 0x000ffa0f },
2097 { 165, 0x00002ccc, 0x00004ab6, 0x000bbe55, 0x000ffa17 },
2099 /* MMAC(Japan)J52 ch 34,38,42,46 */
2100 { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa0b },
2101 { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000ffa13 },
2102 { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa1b },
2103 { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa23 },
2107 static int rt73usb_probe_hw_mode(struct rt2x00_dev
*rt2x00dev
)
2109 struct hw_mode_spec
*spec
= &rt2x00dev
->spec
;
2110 struct channel_info
*info
;
2115 * Initialize all hw fields.
2117 rt2x00dev
->hw
->flags
=
2118 IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING
|
2119 IEEE80211_HW_SIGNAL_DBM
;
2120 rt2x00dev
->hw
->extra_tx_headroom
= TXD_DESC_SIZE
;
2122 SET_IEEE80211_DEV(rt2x00dev
->hw
, rt2x00dev
->dev
);
2123 SET_IEEE80211_PERM_ADDR(rt2x00dev
->hw
,
2124 rt2x00_eeprom_addr(rt2x00dev
,
2125 EEPROM_MAC_ADDR_0
));
2128 * Initialize hw_mode information.
2130 spec
->supported_bands
= SUPPORT_BAND_2GHZ
;
2131 spec
->supported_rates
= SUPPORT_RATE_CCK
| SUPPORT_RATE_OFDM
;
2133 if (rt2x00_rf(&rt2x00dev
->chip
, RF2528
)) {
2134 spec
->num_channels
= ARRAY_SIZE(rf_vals_bg_2528
);
2135 spec
->channels
= rf_vals_bg_2528
;
2136 } else if (rt2x00_rf(&rt2x00dev
->chip
, RF5226
)) {
2137 spec
->supported_bands
|= SUPPORT_BAND_5GHZ
;
2138 spec
->num_channels
= ARRAY_SIZE(rf_vals_5226
);
2139 spec
->channels
= rf_vals_5226
;
2140 } else if (rt2x00_rf(&rt2x00dev
->chip
, RF2527
)) {
2141 spec
->num_channels
= 14;
2142 spec
->channels
= rf_vals_5225_2527
;
2143 } else if (rt2x00_rf(&rt2x00dev
->chip
, RF5225
)) {
2144 spec
->supported_bands
|= SUPPORT_BAND_5GHZ
;
2145 spec
->num_channels
= ARRAY_SIZE(rf_vals_5225_2527
);
2146 spec
->channels
= rf_vals_5225_2527
;
2150 * Create channel information array
2152 info
= kzalloc(spec
->num_channels
* sizeof(*info
), GFP_KERNEL
);
2156 spec
->channels_info
= info
;
2158 tx_power
= rt2x00_eeprom_addr(rt2x00dev
, EEPROM_TXPOWER_G_START
);
2159 for (i
= 0; i
< 14; i
++)
2160 info
[i
].tx_power1
= TXPOWER_FROM_DEV(tx_power
[i
]);
2162 if (spec
->num_channels
> 14) {
2163 tx_power
= rt2x00_eeprom_addr(rt2x00dev
, EEPROM_TXPOWER_A_START
);
2164 for (i
= 14; i
< spec
->num_channels
; i
++)
2165 info
[i
].tx_power1
= TXPOWER_FROM_DEV(tx_power
[i
]);
2171 static int rt73usb_probe_hw(struct rt2x00_dev
*rt2x00dev
)
2176 * Allocate eeprom data.
2178 retval
= rt73usb_validate_eeprom(rt2x00dev
);
2182 retval
= rt73usb_init_eeprom(rt2x00dev
);
2187 * Initialize hw specifications.
2189 retval
= rt73usb_probe_hw_mode(rt2x00dev
);
2194 * This device requires firmware.
2196 __set_bit(DRIVER_REQUIRE_FIRMWARE
, &rt2x00dev
->flags
);
2197 __set_bit(DRIVER_REQUIRE_SCHEDULED
, &rt2x00dev
->flags
);
2198 if (!modparam_nohwcrypt
)
2199 __set_bit(CONFIG_SUPPORT_HW_CRYPTO
, &rt2x00dev
->flags
);
2202 * Set the rssi offset.
2204 rt2x00dev
->rssi_offset
= DEFAULT_RSSI_OFFSET
;
2210 * IEEE80211 stack callback functions.
2212 static int rt73usb_set_retry_limit(struct ieee80211_hw
*hw
,
2213 u32 short_retry
, u32 long_retry
)
2215 struct rt2x00_dev
*rt2x00dev
= hw
->priv
;
2218 rt73usb_register_read(rt2x00dev
, TXRX_CSR4
, ®
);
2219 rt2x00_set_field32(®
, TXRX_CSR4_LONG_RETRY_LIMIT
, long_retry
);
2220 rt2x00_set_field32(®
, TXRX_CSR4_SHORT_RETRY_LIMIT
, short_retry
);
2221 rt73usb_register_write(rt2x00dev
, TXRX_CSR4
, reg
);
2226 static int rt73usb_conf_tx(struct ieee80211_hw
*hw
, u16 queue_idx
,
2227 const struct ieee80211_tx_queue_params
*params
)
2229 struct rt2x00_dev
*rt2x00dev
= hw
->priv
;
2230 struct data_queue
*queue
;
2231 struct rt2x00_field32 field
;
2236 * First pass the configuration through rt2x00lib, that will
2237 * update the queue settings and validate the input. After that
2238 * we are free to update the registers based on the value
2239 * in the queue parameter.
2241 retval
= rt2x00mac_conf_tx(hw
, queue_idx
, params
);
2245 queue
= rt2x00queue_get_queue(rt2x00dev
, queue_idx
);
2247 /* Update WMM TXOP register */
2248 if (queue_idx
< 2) {
2249 field
.bit_offset
= queue_idx
* 16;
2250 field
.bit_mask
= 0xffff << field
.bit_offset
;
2252 rt73usb_register_read(rt2x00dev
, AC_TXOP_CSR0
, ®
);
2253 rt2x00_set_field32(®
, field
, queue
->txop
);
2254 rt73usb_register_write(rt2x00dev
, AC_TXOP_CSR0
, reg
);
2255 } else if (queue_idx
< 4) {
2256 field
.bit_offset
= (queue_idx
- 2) * 16;
2257 field
.bit_mask
= 0xffff << field
.bit_offset
;
2259 rt73usb_register_read(rt2x00dev
, AC_TXOP_CSR1
, ®
);
2260 rt2x00_set_field32(®
, field
, queue
->txop
);
2261 rt73usb_register_write(rt2x00dev
, AC_TXOP_CSR1
, reg
);
2264 /* Update WMM registers */
2265 field
.bit_offset
= queue_idx
* 4;
2266 field
.bit_mask
= 0xf << field
.bit_offset
;
2268 rt73usb_register_read(rt2x00dev
, AIFSN_CSR
, ®
);
2269 rt2x00_set_field32(®
, field
, queue
->aifs
);
2270 rt73usb_register_write(rt2x00dev
, AIFSN_CSR
, reg
);
2272 rt73usb_register_read(rt2x00dev
, CWMIN_CSR
, ®
);
2273 rt2x00_set_field32(®
, field
, queue
->cw_min
);
2274 rt73usb_register_write(rt2x00dev
, CWMIN_CSR
, reg
);
2276 rt73usb_register_read(rt2x00dev
, CWMAX_CSR
, ®
);
2277 rt2x00_set_field32(®
, field
, queue
->cw_max
);
2278 rt73usb_register_write(rt2x00dev
, CWMAX_CSR
, reg
);
2285 * Mac80211 demands get_tsf must be atomic.
2286 * This is not possible for rt73usb since all register access
2287 * functions require sleeping. Untill mac80211 no longer needs
2288 * get_tsf to be atomic, this function should be disabled.
2290 static u64
rt73usb_get_tsf(struct ieee80211_hw
*hw
)
2292 struct rt2x00_dev
*rt2x00dev
= hw
->priv
;
2296 rt73usb_register_read(rt2x00dev
, TXRX_CSR13
, ®
);
2297 tsf
= (u64
) rt2x00_get_field32(reg
, TXRX_CSR13_HIGH_TSFTIMER
) << 32;
2298 rt73usb_register_read(rt2x00dev
, TXRX_CSR12
, ®
);
2299 tsf
|= rt2x00_get_field32(reg
, TXRX_CSR12_LOW_TSFTIMER
);
2304 #define rt73usb_get_tsf NULL
2307 static const struct ieee80211_ops rt73usb_mac80211_ops
= {
2309 .start
= rt2x00mac_start
,
2310 .stop
= rt2x00mac_stop
,
2311 .add_interface
= rt2x00mac_add_interface
,
2312 .remove_interface
= rt2x00mac_remove_interface
,
2313 .config
= rt2x00mac_config
,
2314 .config_interface
= rt2x00mac_config_interface
,
2315 .configure_filter
= rt2x00mac_configure_filter
,
2316 .set_key
= rt2x00mac_set_key
,
2317 .get_stats
= rt2x00mac_get_stats
,
2318 .set_retry_limit
= rt73usb_set_retry_limit
,
2319 .bss_info_changed
= rt2x00mac_bss_info_changed
,
2320 .conf_tx
= rt73usb_conf_tx
,
2321 .get_tx_stats
= rt2x00mac_get_tx_stats
,
2322 .get_tsf
= rt73usb_get_tsf
,
2325 static const struct rt2x00lib_ops rt73usb_rt2x00_ops
= {
2326 .probe_hw
= rt73usb_probe_hw
,
2327 .get_firmware_name
= rt73usb_get_firmware_name
,
2328 .get_firmware_crc
= rt73usb_get_firmware_crc
,
2329 .load_firmware
= rt73usb_load_firmware
,
2330 .initialize
= rt2x00usb_initialize
,
2331 .uninitialize
= rt2x00usb_uninitialize
,
2332 .init_rxentry
= rt2x00usb_init_rxentry
,
2333 .init_txentry
= rt2x00usb_init_txentry
,
2334 .set_device_state
= rt73usb_set_device_state
,
2335 .link_stats
= rt73usb_link_stats
,
2336 .reset_tuner
= rt73usb_reset_tuner
,
2337 .link_tuner
= rt73usb_link_tuner
,
2338 .write_tx_desc
= rt73usb_write_tx_desc
,
2339 .write_tx_data
= rt2x00usb_write_tx_data
,
2340 .write_beacon
= rt73usb_write_beacon
,
2341 .get_tx_data_len
= rt73usb_get_tx_data_len
,
2342 .kick_tx_queue
= rt73usb_kick_tx_queue
,
2343 .fill_rxdone
= rt73usb_fill_rxdone
,
2344 .config_shared_key
= rt73usb_config_shared_key
,
2345 .config_pairwise_key
= rt73usb_config_pairwise_key
,
2346 .config_filter
= rt73usb_config_filter
,
2347 .config_intf
= rt73usb_config_intf
,
2348 .config_erp
= rt73usb_config_erp
,
2349 .config
= rt73usb_config
,
2352 static const struct data_queue_desc rt73usb_queue_rx
= {
2353 .entry_num
= RX_ENTRIES
,
2354 .data_size
= DATA_FRAME_SIZE
,
2355 .desc_size
= RXD_DESC_SIZE
,
2356 .priv_size
= sizeof(struct queue_entry_priv_usb
),
2359 static const struct data_queue_desc rt73usb_queue_tx
= {
2360 .entry_num
= TX_ENTRIES
,
2361 .data_size
= DATA_FRAME_SIZE
,
2362 .desc_size
= TXD_DESC_SIZE
,
2363 .priv_size
= sizeof(struct queue_entry_priv_usb
),
2366 static const struct data_queue_desc rt73usb_queue_bcn
= {
2367 .entry_num
= 4 * BEACON_ENTRIES
,
2368 .data_size
= MGMT_FRAME_SIZE
,
2369 .desc_size
= TXINFO_SIZE
,
2370 .priv_size
= sizeof(struct queue_entry_priv_usb
),
2373 static const struct rt2x00_ops rt73usb_ops
= {
2374 .name
= KBUILD_MODNAME
,
2377 .eeprom_size
= EEPROM_SIZE
,
2379 .tx_queues
= NUM_TX_QUEUES
,
2380 .rx
= &rt73usb_queue_rx
,
2381 .tx
= &rt73usb_queue_tx
,
2382 .bcn
= &rt73usb_queue_bcn
,
2383 .lib
= &rt73usb_rt2x00_ops
,
2384 .hw
= &rt73usb_mac80211_ops
,
2385 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
2386 .debugfs
= &rt73usb_rt2x00debug
,
2387 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
2391 * rt73usb module information.
2393 static struct usb_device_id rt73usb_device_table
[] = {
2395 { USB_DEVICE(0x07b8, 0xb21d), USB_DEVICE_DATA(&rt73usb_ops
) },
2397 { USB_DEVICE(0x1690, 0x0722), USB_DEVICE_DATA(&rt73usb_ops
) },
2399 { USB_DEVICE(0x0b05, 0x1723), USB_DEVICE_DATA(&rt73usb_ops
) },
2400 { USB_DEVICE(0x0b05, 0x1724), USB_DEVICE_DATA(&rt73usb_ops
) },
2402 { USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt73usb_ops
) },
2403 { USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt73usb_ops
) },
2404 { USB_DEVICE(0x050d, 0x905b), USB_DEVICE_DATA(&rt73usb_ops
) },
2405 { USB_DEVICE(0x050d, 0x905c), USB_DEVICE_DATA(&rt73usb_ops
) },
2407 { USB_DEVICE(0x1631, 0xc019), USB_DEVICE_DATA(&rt73usb_ops
) },
2409 { USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops
) },
2411 { USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops
) },
2412 { USB_DEVICE(0x1371, 0x9032), USB_DEVICE_DATA(&rt73usb_ops
) },
2414 { USB_DEVICE(0x14b2, 0x3c22), USB_DEVICE_DATA(&rt73usb_ops
) },
2416 { USB_DEVICE(0x07aa, 0x002e), USB_DEVICE_DATA(&rt73usb_ops
) },
2418 { USB_DEVICE(0x07d1, 0x3c03), USB_DEVICE_DATA(&rt73usb_ops
) },
2419 { USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops
) },
2420 { USB_DEVICE(0x07d1, 0x3c06), USB_DEVICE_DATA(&rt73usb_ops
) },
2421 { USB_DEVICE(0x07d1, 0x3c07), USB_DEVICE_DATA(&rt73usb_ops
) },
2423 { USB_DEVICE(0x15a9, 0x0004), USB_DEVICE_DATA(&rt73usb_ops
) },
2425 { USB_DEVICE(0x1044, 0x8008), USB_DEVICE_DATA(&rt73usb_ops
) },
2426 { USB_DEVICE(0x1044, 0x800a), USB_DEVICE_DATA(&rt73usb_ops
) },
2428 { USB_DEVICE(0x1472, 0x0009), USB_DEVICE_DATA(&rt73usb_ops
) },
2430 { USB_DEVICE(0x06f8, 0xe010), USB_DEVICE_DATA(&rt73usb_ops
) },
2431 { USB_DEVICE(0x06f8, 0xe020), USB_DEVICE_DATA(&rt73usb_ops
) },
2433 { USB_DEVICE(0x13b1, 0x0020), USB_DEVICE_DATA(&rt73usb_ops
) },
2434 { USB_DEVICE(0x13b1, 0x0023), USB_DEVICE_DATA(&rt73usb_ops
) },
2436 { USB_DEVICE(0x0db0, 0x6877), USB_DEVICE_DATA(&rt73usb_ops
) },
2437 { USB_DEVICE(0x0db0, 0x6874), USB_DEVICE_DATA(&rt73usb_ops
) },
2438 { USB_DEVICE(0x0db0, 0xa861), USB_DEVICE_DATA(&rt73usb_ops
) },
2439 { USB_DEVICE(0x0db0, 0xa874), USB_DEVICE_DATA(&rt73usb_ops
) },
2441 { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops
) },
2442 { USB_DEVICE(0x148f, 0x2671), USB_DEVICE_DATA(&rt73usb_ops
) },
2444 { USB_DEVICE(0x18e8, 0x6196), USB_DEVICE_DATA(&rt73usb_ops
) },
2445 { USB_DEVICE(0x18e8, 0x6229), USB_DEVICE_DATA(&rt73usb_ops
) },
2446 { USB_DEVICE(0x18e8, 0x6238), USB_DEVICE_DATA(&rt73usb_ops
) },
2448 { USB_DEVICE(0x1740, 0x7100), USB_DEVICE_DATA(&rt73usb_ops
) },
2450 { USB_DEVICE(0x0df6, 0x9712), USB_DEVICE_DATA(&rt73usb_ops
) },
2451 { USB_DEVICE(0x0df6, 0x90ac), USB_DEVICE_DATA(&rt73usb_ops
) },
2453 { USB_DEVICE(0x0769, 0x31f3), USB_DEVICE_DATA(&rt73usb_ops
) },
2455 { USB_DEVICE(0x2019, 0xab01), USB_DEVICE_DATA(&rt73usb_ops
) },
2456 { USB_DEVICE(0x2019, 0xab50), USB_DEVICE_DATA(&rt73usb_ops
) },
2460 MODULE_AUTHOR(DRV_PROJECT
);
2461 MODULE_VERSION(DRV_VERSION
);
2462 MODULE_DESCRIPTION("Ralink RT73 USB Wireless LAN driver.");
2463 MODULE_SUPPORTED_DEVICE("Ralink RT2571W & RT2671 USB chipset based cards");
2464 MODULE_DEVICE_TABLE(usb
, rt73usb_device_table
);
2465 MODULE_FIRMWARE(FIRMWARE_RT2571
);
2466 MODULE_LICENSE("GPL");
2468 static struct usb_driver rt73usb_driver
= {
2469 .name
= KBUILD_MODNAME
,
2470 .id_table
= rt73usb_device_table
,
2471 .probe
= rt2x00usb_probe
,
2472 .disconnect
= rt2x00usb_disconnect
,
2473 .suspend
= rt2x00usb_suspend
,
2474 .resume
= rt2x00usb_resume
,
2477 static int __init
rt73usb_init(void)
2479 return usb_register(&rt73usb_driver
);
2482 static void __exit
rt73usb_exit(void)
2484 usb_deregister(&rt73usb_driver
);
2487 module_init(rt73usb_init
);
2488 module_exit(rt73usb_exit
);