Merge branch 'for-2.6.38' of git://linux-nfs.org/~bfields/linux
[deliverable/linux.git] / drivers / net / wireless / wl12xx / rx.c
1 /*
2 * This file is part of wl1271
3 *
4 * Copyright (C) 2009 Nokia Corporation
5 *
6 * Contact: Luciano Coelho <luciano.coelho@nokia.com>
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * version 2 as published by the Free Software Foundation.
11 *
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
20 * 02110-1301 USA
21 *
22 */
23
24 #include <linux/gfp.h>
25
26 #include "wl12xx.h"
27 #include "acx.h"
28 #include "reg.h"
29 #include "rx.h"
30 #include "io.h"
31
32 static u8 wl1271_rx_get_mem_block(struct wl1271_fw_status *status,
33 u32 drv_rx_counter)
34 {
35 return le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]) &
36 RX_MEM_BLOCK_MASK;
37 }
38
39 static u32 wl1271_rx_get_buf_size(struct wl1271_fw_status *status,
40 u32 drv_rx_counter)
41 {
42 return (le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]) &
43 RX_BUF_SIZE_MASK) >> RX_BUF_SIZE_SHIFT_DIV;
44 }
45
46 static void wl1271_rx_status(struct wl1271 *wl,
47 struct wl1271_rx_descriptor *desc,
48 struct ieee80211_rx_status *status,
49 u8 beacon)
50 {
51 enum ieee80211_band desc_band;
52
53 memset(status, 0, sizeof(struct ieee80211_rx_status));
54
55 status->band = wl->band;
56
57 if ((desc->flags & WL1271_RX_DESC_BAND_MASK) == WL1271_RX_DESC_BAND_BG)
58 desc_band = IEEE80211_BAND_2GHZ;
59 else
60 desc_band = IEEE80211_BAND_5GHZ;
61
62 status->rate_idx = wl1271_rate_to_idx(desc->rate, desc_band);
63
64 #ifdef CONFIG_WL12XX_HT
65 /* 11n support */
66 if (desc->rate <= CONF_HW_RXTX_RATE_MCS0)
67 status->flag |= RX_FLAG_HT;
68 #endif
69
70 status->signal = desc->rssi;
71
72 /*
73 * FIXME: In wl1251, the SNR should be divided by two. In wl1271 we
74 * need to divide by two for now, but TI has been discussing about
75 * changing it. This needs to be rechecked.
76 */
77 wl->noise = desc->rssi - (desc->snr >> 1);
78
79 status->freq = ieee80211_channel_to_frequency(desc->channel);
80
81 if (desc->flags & WL1271_RX_DESC_ENCRYPT_MASK) {
82 status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED;
83
84 if (likely(!(desc->status & WL1271_RX_DESC_DECRYPT_FAIL)))
85 status->flag |= RX_FLAG_DECRYPTED;
86 if (unlikely(desc->status & WL1271_RX_DESC_MIC_FAIL))
87 status->flag |= RX_FLAG_MMIC_ERROR;
88 }
89 }
90
91 static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length)
92 {
93 struct wl1271_rx_descriptor *desc;
94 struct sk_buff *skb;
95 u16 *fc;
96 u8 *buf;
97 u8 beacon = 0;
98
99 /*
100 * In PLT mode we seem to get frames and mac80211 warns about them,
101 * workaround this by not retrieving them at all.
102 */
103 if (unlikely(wl->state == WL1271_STATE_PLT))
104 return -EINVAL;
105
106 skb = __dev_alloc_skb(length, GFP_KERNEL);
107 if (!skb) {
108 wl1271_error("Couldn't allocate RX frame");
109 return -ENOMEM;
110 }
111
112 buf = skb_put(skb, length);
113 memcpy(buf, data, length);
114
115 /* the data read starts with the descriptor */
116 desc = (struct wl1271_rx_descriptor *) buf;
117
118 /* now we pull the descriptor out of the buffer */
119 skb_pull(skb, sizeof(*desc));
120
121 fc = (u16 *)skb->data;
122 if ((*fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_BEACON)
123 beacon = 1;
124
125 wl1271_rx_status(wl, desc, IEEE80211_SKB_RXCB(skb), beacon);
126
127 wl1271_debug(DEBUG_RX, "rx skb 0x%p: %d B %s", skb, skb->len,
128 beacon ? "beacon" : "");
129
130 skb_trim(skb, skb->len - desc->pad_len);
131
132 ieee80211_rx_ni(wl->hw, skb);
133
134 return 0;
135 }
136
137 void wl1271_rx(struct wl1271 *wl, struct wl1271_fw_status *status)
138 {
139 struct wl1271_acx_mem_map *wl_mem_map = wl->target_mem_map;
140 u32 buf_size;
141 u32 fw_rx_counter = status->fw_rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
142 u32 drv_rx_counter = wl->rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
143 u32 rx_counter;
144 u32 mem_block;
145 u32 pkt_length;
146 u32 pkt_offset;
147
148 while (drv_rx_counter != fw_rx_counter) {
149 buf_size = 0;
150 rx_counter = drv_rx_counter;
151 while (rx_counter != fw_rx_counter) {
152 pkt_length = wl1271_rx_get_buf_size(status, rx_counter);
153 if (buf_size + pkt_length > WL1271_AGGR_BUFFER_SIZE)
154 break;
155 buf_size += pkt_length;
156 rx_counter++;
157 rx_counter &= NUM_RX_PKT_DESC_MOD_MASK;
158 }
159
160 if (buf_size == 0) {
161 wl1271_warning("received empty data");
162 break;
163 }
164
165 /*
166 * Choose the block we want to read
167 * For aggregated packets, only the first memory block should
168 * be retrieved. The FW takes care of the rest.
169 */
170 mem_block = wl1271_rx_get_mem_block(status, drv_rx_counter);
171 wl->rx_mem_pool_addr.addr = (mem_block << 8) +
172 le32_to_cpu(wl_mem_map->packet_memory_pool_start);
173 wl->rx_mem_pool_addr.addr_extra =
174 wl->rx_mem_pool_addr.addr + 4;
175 wl1271_write(wl, WL1271_SLV_REG_DATA, &wl->rx_mem_pool_addr,
176 sizeof(wl->rx_mem_pool_addr), false);
177
178 /* Read all available packets at once */
179 wl1271_read(wl, WL1271_SLV_MEM_DATA, wl->aggr_buf,
180 buf_size, true);
181
182 /* Split data into separate packets */
183 pkt_offset = 0;
184 while (pkt_offset < buf_size) {
185 pkt_length = wl1271_rx_get_buf_size(status,
186 drv_rx_counter);
187 /*
188 * the handle data call can only fail in memory-outage
189 * conditions, in that case the received frame will just
190 * be dropped.
191 */
192 wl1271_rx_handle_data(wl,
193 wl->aggr_buf + pkt_offset,
194 pkt_length);
195 wl->rx_counter++;
196 drv_rx_counter++;
197 drv_rx_counter &= NUM_RX_PKT_DESC_MOD_MASK;
198 pkt_offset += pkt_length;
199 }
200 }
201 wl1271_write32(wl, RX_DRIVER_COUNTER_ADDRESS,
202 cpu_to_le32(wl->rx_counter));
203 }
This page took 0.036347 seconds and 6 git commands to generate.