3 * Purpose: PCI Message Signaled Interrupt (MSI)
5 * Copyright (C) 2003-2004 Intel
6 * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
11 #include <linux/irq.h>
12 #include <linux/interrupt.h>
13 #include <linux/init.h>
14 #include <linux/export.h>
15 #include <linux/ioport.h>
16 #include <linux/pci.h>
17 #include <linux/proc_fs.h>
18 #include <linux/msi.h>
19 #include <linux/smp.h>
20 #include <linux/errno.h>
22 #include <linux/slab.h>
26 static int pci_msi_enable
= 1;
28 #define msix_table_size(flags) ((flags & PCI_MSIX_FLAGS_QSIZE) + 1)
33 int __weak
arch_setup_msi_irq(struct pci_dev
*dev
, struct msi_desc
*desc
)
35 struct msi_chip
*chip
= dev
->bus
->msi
;
38 if (!chip
|| !chip
->setup_irq
)
41 err
= chip
->setup_irq(chip
, dev
, desc
);
45 irq_set_chip_data(desc
->irq
, chip
);
50 void __weak
arch_teardown_msi_irq(unsigned int irq
)
52 struct msi_chip
*chip
= irq_get_chip_data(irq
);
54 if (!chip
|| !chip
->teardown_irq
)
57 chip
->teardown_irq(chip
, irq
);
60 int __weak
arch_msi_check_device(struct pci_dev
*dev
, int nvec
, int type
)
62 struct msi_chip
*chip
= dev
->bus
->msi
;
64 if (!chip
|| !chip
->check_device
)
67 return chip
->check_device(chip
, dev
, nvec
, type
);
70 int __weak
arch_setup_msi_irqs(struct pci_dev
*dev
, int nvec
, int type
)
72 struct msi_desc
*entry
;
76 * If an architecture wants to support multiple MSI, it needs to
77 * override arch_setup_msi_irqs()
79 if (type
== PCI_CAP_ID_MSI
&& nvec
> 1)
82 list_for_each_entry(entry
, &dev
->msi_list
, list
) {
83 ret
= arch_setup_msi_irq(dev
, entry
);
94 * We have a default implementation available as a separate non-weak
95 * function, as it is used by the Xen x86 PCI code
97 void default_teardown_msi_irqs(struct pci_dev
*dev
)
99 struct msi_desc
*entry
;
101 list_for_each_entry(entry
, &dev
->msi_list
, list
) {
105 if (entry
->nvec_used
)
106 nvec
= entry
->nvec_used
;
108 nvec
= 1 << entry
->msi_attrib
.multiple
;
109 for (i
= 0; i
< nvec
; i
++)
110 arch_teardown_msi_irq(entry
->irq
+ i
);
114 void __weak
arch_teardown_msi_irqs(struct pci_dev
*dev
)
116 return default_teardown_msi_irqs(dev
);
119 static void default_restore_msi_irq(struct pci_dev
*dev
, int irq
)
121 struct msi_desc
*entry
;
124 if (dev
->msix_enabled
) {
125 list_for_each_entry(entry
, &dev
->msi_list
, list
) {
126 if (irq
== entry
->irq
)
129 } else if (dev
->msi_enabled
) {
130 entry
= irq_get_msi_desc(irq
);
134 write_msi_msg(irq
, &entry
->msg
);
137 void __weak
arch_restore_msi_irqs(struct pci_dev
*dev
)
139 return default_restore_msi_irqs(dev
);
142 static void msi_set_enable(struct pci_dev
*dev
, int enable
)
146 pci_read_config_word(dev
, dev
->msi_cap
+ PCI_MSI_FLAGS
, &control
);
147 control
&= ~PCI_MSI_FLAGS_ENABLE
;
149 control
|= PCI_MSI_FLAGS_ENABLE
;
150 pci_write_config_word(dev
, dev
->msi_cap
+ PCI_MSI_FLAGS
, control
);
153 static void msix_set_enable(struct pci_dev
*dev
, int enable
)
157 pci_read_config_word(dev
, dev
->msix_cap
+ PCI_MSIX_FLAGS
, &control
);
158 control
&= ~PCI_MSIX_FLAGS_ENABLE
;
160 control
|= PCI_MSIX_FLAGS_ENABLE
;
161 pci_write_config_word(dev
, dev
->msix_cap
+ PCI_MSIX_FLAGS
, control
);
164 static inline __attribute_const__ u32
msi_mask(unsigned x
)
166 /* Don't shift by >= width of type */
169 return (1 << (1 << x
)) - 1;
172 static inline __attribute_const__ u32
msi_capable_mask(u16 control
)
174 return msi_mask((control
>> 1) & 7);
177 static inline __attribute_const__ u32
msi_enabled_mask(u16 control
)
179 return msi_mask((control
>> 4) & 7);
183 * PCI 2.3 does not specify mask bits for each MSI interrupt. Attempting to
184 * mask all MSI interrupts by clearing the MSI enable bit does not work
185 * reliably as devices without an INTx disable bit will then generate a
186 * level IRQ which will never be cleared.
188 u32
default_msi_mask_irq(struct msi_desc
*desc
, u32 mask
, u32 flag
)
190 u32 mask_bits
= desc
->masked
;
192 if (!desc
->msi_attrib
.maskbit
)
197 pci_write_config_dword(desc
->dev
, desc
->mask_pos
, mask_bits
);
202 __weak u32
arch_msi_mask_irq(struct msi_desc
*desc
, u32 mask
, u32 flag
)
204 return default_msi_mask_irq(desc
, mask
, flag
);
207 static void msi_mask_irq(struct msi_desc
*desc
, u32 mask
, u32 flag
)
209 desc
->masked
= arch_msi_mask_irq(desc
, mask
, flag
);
213 * This internal function does not flush PCI writes to the device.
214 * All users must ensure that they read from the device before either
215 * assuming that the device state is up to date, or returning out of this
216 * file. This saves a few milliseconds when initialising devices with lots
217 * of MSI-X interrupts.
219 u32
default_msix_mask_irq(struct msi_desc
*desc
, u32 flag
)
221 u32 mask_bits
= desc
->masked
;
222 unsigned offset
= desc
->msi_attrib
.entry_nr
* PCI_MSIX_ENTRY_SIZE
+
223 PCI_MSIX_ENTRY_VECTOR_CTRL
;
224 mask_bits
&= ~PCI_MSIX_ENTRY_CTRL_MASKBIT
;
226 mask_bits
|= PCI_MSIX_ENTRY_CTRL_MASKBIT
;
227 writel(mask_bits
, desc
->mask_base
+ offset
);
232 __weak u32
arch_msix_mask_irq(struct msi_desc
*desc
, u32 flag
)
234 return default_msix_mask_irq(desc
, flag
);
237 static void msix_mask_irq(struct msi_desc
*desc
, u32 flag
)
239 desc
->masked
= arch_msix_mask_irq(desc
, flag
);
242 static void msi_set_mask_bit(struct irq_data
*data
, u32 flag
)
244 struct msi_desc
*desc
= irq_data_get_msi(data
);
246 if (desc
->msi_attrib
.is_msix
) {
247 msix_mask_irq(desc
, flag
);
248 readl(desc
->mask_base
); /* Flush write to device */
250 unsigned offset
= data
->irq
- desc
->dev
->irq
;
251 msi_mask_irq(desc
, 1 << offset
, flag
<< offset
);
255 void mask_msi_irq(struct irq_data
*data
)
257 msi_set_mask_bit(data
, 1);
260 void unmask_msi_irq(struct irq_data
*data
)
262 msi_set_mask_bit(data
, 0);
265 void default_restore_msi_irqs(struct pci_dev
*dev
)
267 struct msi_desc
*entry
;
269 list_for_each_entry(entry
, &dev
->msi_list
, list
) {
270 default_restore_msi_irq(dev
, entry
->irq
);
274 void __read_msi_msg(struct msi_desc
*entry
, struct msi_msg
*msg
)
276 BUG_ON(entry
->dev
->current_state
!= PCI_D0
);
278 if (entry
->msi_attrib
.is_msix
) {
279 void __iomem
*base
= entry
->mask_base
+
280 entry
->msi_attrib
.entry_nr
* PCI_MSIX_ENTRY_SIZE
;
282 msg
->address_lo
= readl(base
+ PCI_MSIX_ENTRY_LOWER_ADDR
);
283 msg
->address_hi
= readl(base
+ PCI_MSIX_ENTRY_UPPER_ADDR
);
284 msg
->data
= readl(base
+ PCI_MSIX_ENTRY_DATA
);
286 struct pci_dev
*dev
= entry
->dev
;
287 int pos
= dev
->msi_cap
;
290 pci_read_config_dword(dev
, pos
+ PCI_MSI_ADDRESS_LO
,
292 if (entry
->msi_attrib
.is_64
) {
293 pci_read_config_dword(dev
, pos
+ PCI_MSI_ADDRESS_HI
,
295 pci_read_config_word(dev
, pos
+ PCI_MSI_DATA_64
, &data
);
298 pci_read_config_word(dev
, pos
+ PCI_MSI_DATA_32
, &data
);
304 void read_msi_msg(unsigned int irq
, struct msi_msg
*msg
)
306 struct msi_desc
*entry
= irq_get_msi_desc(irq
);
308 __read_msi_msg(entry
, msg
);
311 void __get_cached_msi_msg(struct msi_desc
*entry
, struct msi_msg
*msg
)
313 /* Assert that the cache is valid, assuming that
314 * valid messages are not all-zeroes. */
315 BUG_ON(!(entry
->msg
.address_hi
| entry
->msg
.address_lo
|
321 void get_cached_msi_msg(unsigned int irq
, struct msi_msg
*msg
)
323 struct msi_desc
*entry
= irq_get_msi_desc(irq
);
325 __get_cached_msi_msg(entry
, msg
);
328 void __write_msi_msg(struct msi_desc
*entry
, struct msi_msg
*msg
)
330 if (entry
->dev
->current_state
!= PCI_D0
) {
331 /* Don't touch the hardware now */
332 } else if (entry
->msi_attrib
.is_msix
) {
334 base
= entry
->mask_base
+
335 entry
->msi_attrib
.entry_nr
* PCI_MSIX_ENTRY_SIZE
;
337 writel(msg
->address_lo
, base
+ PCI_MSIX_ENTRY_LOWER_ADDR
);
338 writel(msg
->address_hi
, base
+ PCI_MSIX_ENTRY_UPPER_ADDR
);
339 writel(msg
->data
, base
+ PCI_MSIX_ENTRY_DATA
);
341 struct pci_dev
*dev
= entry
->dev
;
342 int pos
= dev
->msi_cap
;
345 pci_read_config_word(dev
, pos
+ PCI_MSI_FLAGS
, &msgctl
);
346 msgctl
&= ~PCI_MSI_FLAGS_QSIZE
;
347 msgctl
|= entry
->msi_attrib
.multiple
<< 4;
348 pci_write_config_word(dev
, pos
+ PCI_MSI_FLAGS
, msgctl
);
350 pci_write_config_dword(dev
, pos
+ PCI_MSI_ADDRESS_LO
,
352 if (entry
->msi_attrib
.is_64
) {
353 pci_write_config_dword(dev
, pos
+ PCI_MSI_ADDRESS_HI
,
355 pci_write_config_word(dev
, pos
+ PCI_MSI_DATA_64
,
358 pci_write_config_word(dev
, pos
+ PCI_MSI_DATA_32
,
365 void write_msi_msg(unsigned int irq
, struct msi_msg
*msg
)
367 struct msi_desc
*entry
= irq_get_msi_desc(irq
);
369 __write_msi_msg(entry
, msg
);
372 static void free_msi_irqs(struct pci_dev
*dev
)
374 struct msi_desc
*entry
, *tmp
;
375 struct attribute
**msi_attrs
;
376 struct device_attribute
*dev_attr
;
379 list_for_each_entry(entry
, &dev
->msi_list
, list
) {
383 if (entry
->nvec_used
)
384 nvec
= entry
->nvec_used
;
386 nvec
= 1 << entry
->msi_attrib
.multiple
;
387 for (i
= 0; i
< nvec
; i
++)
388 BUG_ON(irq_has_action(entry
->irq
+ i
));
391 arch_teardown_msi_irqs(dev
);
393 list_for_each_entry_safe(entry
, tmp
, &dev
->msi_list
, list
) {
394 if (entry
->msi_attrib
.is_msix
) {
395 if (list_is_last(&entry
->list
, &dev
->msi_list
))
396 iounmap(entry
->mask_base
);
400 * Its possible that we get into this path
401 * When populate_msi_sysfs fails, which means the entries
402 * were not registered with sysfs. In that case don't
405 if (entry
->kobj
.parent
) {
406 kobject_del(&entry
->kobj
);
407 kobject_put(&entry
->kobj
);
410 list_del(&entry
->list
);
414 if (dev
->msi_irq_groups
) {
415 sysfs_remove_groups(&dev
->dev
.kobj
, dev
->msi_irq_groups
);
416 msi_attrs
= dev
->msi_irq_groups
[0]->attrs
;
417 list_for_each_entry(entry
, &dev
->msi_list
, list
) {
418 dev_attr
= container_of(msi_attrs
[count
],
419 struct device_attribute
, attr
);
420 kfree(dev_attr
->attr
.name
);
425 kfree(dev
->msi_irq_groups
[0]);
426 kfree(dev
->msi_irq_groups
);
427 dev
->msi_irq_groups
= NULL
;
431 static struct msi_desc
*alloc_msi_entry(struct pci_dev
*dev
)
433 struct msi_desc
*desc
= kzalloc(sizeof(*desc
), GFP_KERNEL
);
437 INIT_LIST_HEAD(&desc
->list
);
443 static void pci_intx_for_msi(struct pci_dev
*dev
, int enable
)
445 if (!(dev
->dev_flags
& PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG
))
446 pci_intx(dev
, enable
);
449 static void __pci_restore_msi_state(struct pci_dev
*dev
)
452 struct msi_desc
*entry
;
454 if (!dev
->msi_enabled
)
457 entry
= irq_get_msi_desc(dev
->irq
);
459 pci_intx_for_msi(dev
, 0);
460 msi_set_enable(dev
, 0);
461 arch_restore_msi_irqs(dev
);
463 pci_read_config_word(dev
, dev
->msi_cap
+ PCI_MSI_FLAGS
, &control
);
464 msi_mask_irq(entry
, msi_capable_mask(control
), entry
->masked
);
465 control
&= ~PCI_MSI_FLAGS_QSIZE
;
466 control
|= (entry
->msi_attrib
.multiple
<< 4) | PCI_MSI_FLAGS_ENABLE
;
467 pci_write_config_word(dev
, dev
->msi_cap
+ PCI_MSI_FLAGS
, control
);
470 static void __pci_restore_msix_state(struct pci_dev
*dev
)
472 struct msi_desc
*entry
;
475 if (!dev
->msix_enabled
)
477 BUG_ON(list_empty(&dev
->msi_list
));
478 entry
= list_first_entry(&dev
->msi_list
, struct msi_desc
, list
);
479 pci_read_config_word(dev
, dev
->msix_cap
+ PCI_MSIX_FLAGS
, &control
);
481 /* route the table */
482 pci_intx_for_msi(dev
, 0);
483 control
|= PCI_MSIX_FLAGS_ENABLE
| PCI_MSIX_FLAGS_MASKALL
;
484 pci_write_config_word(dev
, dev
->msix_cap
+ PCI_MSIX_FLAGS
, control
);
486 arch_restore_msi_irqs(dev
);
487 list_for_each_entry(entry
, &dev
->msi_list
, list
) {
488 msix_mask_irq(entry
, entry
->masked
);
491 control
&= ~PCI_MSIX_FLAGS_MASKALL
;
492 pci_write_config_word(dev
, dev
->msix_cap
+ PCI_MSIX_FLAGS
, control
);
495 void pci_restore_msi_state(struct pci_dev
*dev
)
497 __pci_restore_msi_state(dev
);
498 __pci_restore_msix_state(dev
);
500 EXPORT_SYMBOL_GPL(pci_restore_msi_state
);
502 static ssize_t
msi_mode_show(struct device
*dev
, struct device_attribute
*attr
,
505 struct pci_dev
*pdev
= to_pci_dev(dev
);
506 struct msi_desc
*entry
;
510 retval
= kstrtoul(attr
->attr
.name
, 10, &irq
);
514 list_for_each_entry(entry
, &pdev
->msi_list
, list
) {
515 if (entry
->irq
== irq
) {
516 return sprintf(buf
, "%s\n",
517 entry
->msi_attrib
.is_msix
? "msix" : "msi");
523 static int populate_msi_sysfs(struct pci_dev
*pdev
)
525 struct attribute
**msi_attrs
;
526 struct attribute
*msi_attr
;
527 struct device_attribute
*msi_dev_attr
;
528 struct attribute_group
*msi_irq_group
;
529 const struct attribute_group
**msi_irq_groups
;
530 struct msi_desc
*entry
;
535 /* Determine how many msi entries we have */
536 list_for_each_entry(entry
, &pdev
->msi_list
, list
) {
542 /* Dynamically create the MSI attributes for the PCI device */
543 msi_attrs
= kzalloc(sizeof(void *) * (num_msi
+ 1), GFP_KERNEL
);
546 list_for_each_entry(entry
, &pdev
->msi_list
, list
) {
547 char *name
= kmalloc(20, GFP_KERNEL
);
551 msi_dev_attr
= kzalloc(sizeof(*msi_dev_attr
), GFP_KERNEL
);
557 sprintf(name
, "%d", entry
->irq
);
558 sysfs_attr_init(&msi_dev_attr
->attr
);
559 msi_dev_attr
->attr
.name
= name
;
560 msi_dev_attr
->attr
.mode
= S_IRUGO
;
561 msi_dev_attr
->show
= msi_mode_show
;
562 msi_attrs
[count
] = &msi_dev_attr
->attr
;
566 msi_irq_group
= kzalloc(sizeof(*msi_irq_group
), GFP_KERNEL
);
569 msi_irq_group
->name
= "msi_irqs";
570 msi_irq_group
->attrs
= msi_attrs
;
572 msi_irq_groups
= kzalloc(sizeof(void *) * 2, GFP_KERNEL
);
574 goto error_irq_group
;
575 msi_irq_groups
[0] = msi_irq_group
;
577 ret
= sysfs_create_groups(&pdev
->dev
.kobj
, msi_irq_groups
);
579 goto error_irq_groups
;
580 pdev
->msi_irq_groups
= msi_irq_groups
;
585 kfree(msi_irq_groups
);
587 kfree(msi_irq_group
);
590 msi_attr
= msi_attrs
[count
];
592 msi_dev_attr
= container_of(msi_attr
, struct device_attribute
, attr
);
593 kfree(msi_attr
->name
);
596 msi_attr
= msi_attrs
[count
];
603 * msi_capability_init - configure device's MSI capability structure
604 * @dev: pointer to the pci_dev data structure of MSI device function
605 * @nvec: number of interrupts to allocate
607 * Setup the MSI capability structure of the device with the requested
608 * number of interrupts. A return value of zero indicates the successful
609 * setup of an entry with the new MSI irq. A negative return value indicates
610 * an error, and a positive return value indicates the number of interrupts
611 * which could have been allocated.
613 static int msi_capability_init(struct pci_dev
*dev
, int nvec
)
615 struct msi_desc
*entry
;
620 msi_set_enable(dev
, 0); /* Disable MSI during set up */
622 pci_read_config_word(dev
, dev
->msi_cap
+ PCI_MSI_FLAGS
, &control
);
623 /* MSI Entry Initialization */
624 entry
= alloc_msi_entry(dev
);
628 entry
->msi_attrib
.is_msix
= 0;
629 entry
->msi_attrib
.is_64
= !!(control
& PCI_MSI_FLAGS_64BIT
);
630 entry
->msi_attrib
.entry_nr
= 0;
631 entry
->msi_attrib
.maskbit
= !!(control
& PCI_MSI_FLAGS_MASKBIT
);
632 entry
->msi_attrib
.default_irq
= dev
->irq
; /* Save IOAPIC IRQ */
633 entry
->msi_attrib
.pos
= dev
->msi_cap
;
635 if (control
& PCI_MSI_FLAGS_64BIT
)
636 entry
->mask_pos
= dev
->msi_cap
+ PCI_MSI_MASK_64
;
638 entry
->mask_pos
= dev
->msi_cap
+ PCI_MSI_MASK_32
;
639 /* All MSIs are unmasked by default, Mask them all */
640 if (entry
->msi_attrib
.maskbit
)
641 pci_read_config_dword(dev
, entry
->mask_pos
, &entry
->masked
);
642 mask
= msi_capable_mask(control
);
643 msi_mask_irq(entry
, mask
, mask
);
645 list_add_tail(&entry
->list
, &dev
->msi_list
);
647 /* Configure MSI capability structure */
648 ret
= arch_setup_msi_irqs(dev
, nvec
, PCI_CAP_ID_MSI
);
650 msi_mask_irq(entry
, mask
, ~mask
);
655 ret
= populate_msi_sysfs(dev
);
657 msi_mask_irq(entry
, mask
, ~mask
);
662 /* Set MSI enabled bits */
663 pci_intx_for_msi(dev
, 0);
664 msi_set_enable(dev
, 1);
665 dev
->msi_enabled
= 1;
667 dev
->irq
= entry
->irq
;
671 static void __iomem
*msix_map_region(struct pci_dev
*dev
, unsigned nr_entries
)
673 resource_size_t phys_addr
;
677 pci_read_config_dword(dev
, dev
->msix_cap
+ PCI_MSIX_TABLE
,
679 bir
= (u8
)(table_offset
& PCI_MSIX_TABLE_BIR
);
680 table_offset
&= PCI_MSIX_TABLE_OFFSET
;
681 phys_addr
= pci_resource_start(dev
, bir
) + table_offset
;
683 return ioremap_nocache(phys_addr
, nr_entries
* PCI_MSIX_ENTRY_SIZE
);
686 static int msix_setup_entries(struct pci_dev
*dev
, void __iomem
*base
,
687 struct msix_entry
*entries
, int nvec
)
689 struct msi_desc
*entry
;
692 for (i
= 0; i
< nvec
; i
++) {
693 entry
= alloc_msi_entry(dev
);
699 /* No enough memory. Don't try again */
703 entry
->msi_attrib
.is_msix
= 1;
704 entry
->msi_attrib
.is_64
= 1;
705 entry
->msi_attrib
.entry_nr
= entries
[i
].entry
;
706 entry
->msi_attrib
.default_irq
= dev
->irq
;
707 entry
->msi_attrib
.pos
= dev
->msix_cap
;
708 entry
->mask_base
= base
;
710 list_add_tail(&entry
->list
, &dev
->msi_list
);
716 static void msix_program_entries(struct pci_dev
*dev
,
717 struct msix_entry
*entries
)
719 struct msi_desc
*entry
;
722 list_for_each_entry(entry
, &dev
->msi_list
, list
) {
723 int offset
= entries
[i
].entry
* PCI_MSIX_ENTRY_SIZE
+
724 PCI_MSIX_ENTRY_VECTOR_CTRL
;
726 entries
[i
].vector
= entry
->irq
;
727 irq_set_msi_desc(entry
->irq
, entry
);
728 entry
->masked
= readl(entry
->mask_base
+ offset
);
729 msix_mask_irq(entry
, 1);
735 * msix_capability_init - configure device's MSI-X capability
736 * @dev: pointer to the pci_dev data structure of MSI-X device function
737 * @entries: pointer to an array of struct msix_entry entries
738 * @nvec: number of @entries
740 * Setup the MSI-X capability structure of device function with a
741 * single MSI-X irq. A return of zero indicates the successful setup of
742 * requested MSI-X entries with allocated irqs or non-zero for otherwise.
744 static int msix_capability_init(struct pci_dev
*dev
,
745 struct msix_entry
*entries
, int nvec
)
751 pci_read_config_word(dev
, dev
->msix_cap
+ PCI_MSIX_FLAGS
, &control
);
753 /* Ensure MSI-X is disabled while it is set up */
754 control
&= ~PCI_MSIX_FLAGS_ENABLE
;
755 pci_write_config_word(dev
, dev
->msix_cap
+ PCI_MSIX_FLAGS
, control
);
757 /* Request & Map MSI-X table region */
758 base
= msix_map_region(dev
, msix_table_size(control
));
762 ret
= msix_setup_entries(dev
, base
, entries
, nvec
);
766 ret
= arch_setup_msi_irqs(dev
, nvec
, PCI_CAP_ID_MSIX
);
771 * Some devices require MSI-X to be enabled before we can touch the
772 * MSI-X registers. We need to mask all the vectors to prevent
773 * interrupts coming in before they're fully set up.
775 control
|= PCI_MSIX_FLAGS_MASKALL
| PCI_MSIX_FLAGS_ENABLE
;
776 pci_write_config_word(dev
, dev
->msix_cap
+ PCI_MSIX_FLAGS
, control
);
778 msix_program_entries(dev
, entries
);
780 ret
= populate_msi_sysfs(dev
);
784 /* Set MSI-X enabled bits and unmask the function */
785 pci_intx_for_msi(dev
, 0);
786 dev
->msix_enabled
= 1;
788 control
&= ~PCI_MSIX_FLAGS_MASKALL
;
789 pci_write_config_word(dev
, dev
->msix_cap
+ PCI_MSIX_FLAGS
, control
);
796 * If we had some success, report the number of irqs
797 * we succeeded in setting up.
799 struct msi_desc
*entry
;
802 list_for_each_entry(entry
, &dev
->msi_list
, list
) {
817 * pci_msi_check_device - check whether MSI may be enabled on a device
818 * @dev: pointer to the pci_dev data structure of MSI device function
819 * @nvec: how many MSIs have been requested ?
820 * @type: are we checking for MSI or MSI-X ?
822 * Look at global flags, the device itself, and its parent buses
823 * to determine if MSI/-X are supported for the device. If MSI/-X is
824 * supported return 0, else return an error code.
826 static int pci_msi_check_device(struct pci_dev
*dev
, int nvec
, int type
)
831 /* MSI must be globally enabled and supported by the device */
832 if (!pci_msi_enable
|| !dev
|| dev
->no_msi
)
836 * You can't ask to have 0 or less MSIs configured.
838 * b) the list manipulation code assumes nvec >= 1.
844 * Any bridge which does NOT route MSI transactions from its
845 * secondary bus to its primary bus must set NO_MSI flag on
846 * the secondary pci_bus.
847 * We expect only arch-specific PCI host bus controller driver
848 * or quirks for specific PCI bridges to be setting NO_MSI.
850 for (bus
= dev
->bus
; bus
; bus
= bus
->parent
)
851 if (bus
->bus_flags
& PCI_BUS_FLAGS_NO_MSI
)
854 ret
= arch_msi_check_device(dev
, nvec
, type
);
862 * pci_msi_vec_count - Return the number of MSI vectors a device can send
863 * @dev: device to report about
865 * This function returns the number of MSI vectors a device requested via
866 * Multiple Message Capable register. It returns a negative errno if the
867 * device is not capable sending MSI interrupts. Otherwise, the call succeeds
868 * and returns a power of two, up to a maximum of 2^5 (32), according to the
871 int pci_msi_vec_count(struct pci_dev
*dev
)
879 pci_read_config_word(dev
, dev
->msi_cap
+ PCI_MSI_FLAGS
, &msgctl
);
880 ret
= 1 << ((msgctl
& PCI_MSI_FLAGS_QMASK
) >> 1);
884 EXPORT_SYMBOL(pci_msi_vec_count
);
887 * pci_enable_msi_block - configure device's MSI capability structure
888 * @dev: device to configure
889 * @nvec: number of interrupts to configure
891 * Allocate IRQs for a device with the MSI capability.
892 * This function returns a negative errno if an error occurs. If it
893 * is unable to allocate the number of interrupts requested, it returns
894 * the number of interrupts it might be able to allocate. If it successfully
895 * allocates at least the number of interrupts requested, it returns 0 and
896 * updates the @dev's irq member to the lowest new interrupt number; the
897 * other interrupt numbers allocated to this device are consecutive.
899 int pci_enable_msi_block(struct pci_dev
*dev
, int nvec
)
903 if (dev
->current_state
!= PCI_D0
)
906 maxvec
= pci_msi_vec_count(dev
);
912 status
= pci_msi_check_device(dev
, nvec
, PCI_CAP_ID_MSI
);
916 WARN_ON(!!dev
->msi_enabled
);
918 /* Check whether driver already requested MSI-X irqs */
919 if (dev
->msix_enabled
) {
920 dev_info(&dev
->dev
, "can't enable MSI "
921 "(MSI-X already enabled)\n");
925 status
= msi_capability_init(dev
, nvec
);
928 EXPORT_SYMBOL(pci_enable_msi_block
);
930 void pci_msi_shutdown(struct pci_dev
*dev
)
932 struct msi_desc
*desc
;
936 if (!pci_msi_enable
|| !dev
|| !dev
->msi_enabled
)
939 BUG_ON(list_empty(&dev
->msi_list
));
940 desc
= list_first_entry(&dev
->msi_list
, struct msi_desc
, list
);
942 msi_set_enable(dev
, 0);
943 pci_intx_for_msi(dev
, 1);
944 dev
->msi_enabled
= 0;
946 /* Return the device with MSI unmasked as initial states */
947 pci_read_config_word(dev
, dev
->msi_cap
+ PCI_MSI_FLAGS
, &ctrl
);
948 mask
= msi_capable_mask(ctrl
);
949 /* Keep cached state to be restored */
950 arch_msi_mask_irq(desc
, mask
, ~mask
);
952 /* Restore dev->irq to its default pin-assertion irq */
953 dev
->irq
= desc
->msi_attrib
.default_irq
;
956 void pci_disable_msi(struct pci_dev
*dev
)
958 if (!pci_msi_enable
|| !dev
|| !dev
->msi_enabled
)
961 pci_msi_shutdown(dev
);
964 EXPORT_SYMBOL(pci_disable_msi
);
967 * pci_msix_vec_count - return the number of device's MSI-X table entries
968 * @dev: pointer to the pci_dev data structure of MSI-X device function
969 * This function returns the number of device's MSI-X table entries and
970 * therefore the number of MSI-X vectors device is capable of sending.
971 * It returns a negative errno if the device is not capable of sending MSI-X
974 int pci_msix_vec_count(struct pci_dev
*dev
)
981 pci_read_config_word(dev
, dev
->msix_cap
+ PCI_MSIX_FLAGS
, &control
);
982 return msix_table_size(control
);
984 EXPORT_SYMBOL(pci_msix_vec_count
);
987 * pci_enable_msix - configure device's MSI-X capability structure
988 * @dev: pointer to the pci_dev data structure of MSI-X device function
989 * @entries: pointer to an array of MSI-X entries
990 * @nvec: number of MSI-X irqs requested for allocation by device driver
992 * Setup the MSI-X capability structure of device function with the number
993 * of requested irqs upon its software driver call to request for
994 * MSI-X mode enabled on its hardware device function. A return of zero
995 * indicates the successful configuration of MSI-X capability structure
996 * with new allocated MSI-X irqs. A return of < 0 indicates a failure.
997 * Or a return of > 0 indicates that driver request is exceeding the number
998 * of irqs or MSI-X vectors available. Driver should use the returned value to
999 * re-send its request.
1001 int pci_enable_msix(struct pci_dev
*dev
, struct msix_entry
*entries
, int nvec
)
1003 int status
, nr_entries
;
1006 if (!entries
|| !dev
->msix_cap
|| dev
->current_state
!= PCI_D0
)
1009 status
= pci_msi_check_device(dev
, nvec
, PCI_CAP_ID_MSIX
);
1013 nr_entries
= pci_msix_vec_count(dev
);
1016 if (nvec
> nr_entries
)
1019 /* Check for any invalid entries */
1020 for (i
= 0; i
< nvec
; i
++) {
1021 if (entries
[i
].entry
>= nr_entries
)
1022 return -EINVAL
; /* invalid entry */
1023 for (j
= i
+ 1; j
< nvec
; j
++) {
1024 if (entries
[i
].entry
== entries
[j
].entry
)
1025 return -EINVAL
; /* duplicate entry */
1028 WARN_ON(!!dev
->msix_enabled
);
1030 /* Check whether driver already requested for MSI irq */
1031 if (dev
->msi_enabled
) {
1032 dev_info(&dev
->dev
, "can't enable MSI-X "
1033 "(MSI IRQ already assigned)\n");
1036 status
= msix_capability_init(dev
, entries
, nvec
);
1039 EXPORT_SYMBOL(pci_enable_msix
);
1041 void pci_msix_shutdown(struct pci_dev
*dev
)
1043 struct msi_desc
*entry
;
1045 if (!pci_msi_enable
|| !dev
|| !dev
->msix_enabled
)
1048 /* Return the device with MSI-X masked as initial states */
1049 list_for_each_entry(entry
, &dev
->msi_list
, list
) {
1050 /* Keep cached states to be restored */
1051 arch_msix_mask_irq(entry
, 1);
1054 msix_set_enable(dev
, 0);
1055 pci_intx_for_msi(dev
, 1);
1056 dev
->msix_enabled
= 0;
1059 void pci_disable_msix(struct pci_dev
*dev
)
1061 if (!pci_msi_enable
|| !dev
|| !dev
->msix_enabled
)
1064 pci_msix_shutdown(dev
);
1067 EXPORT_SYMBOL(pci_disable_msix
);
1070 * msi_remove_pci_irq_vectors - reclaim MSI(X) irqs to unused state
1071 * @dev: pointer to the pci_dev data structure of MSI(X) device function
1073 * Being called during hotplug remove, from which the device function
1074 * is hot-removed. All previous assigned MSI/MSI-X irqs, if
1075 * allocated for this device function, are reclaimed to unused state,
1076 * which may be used later on.
1078 void msi_remove_pci_irq_vectors(struct pci_dev
*dev
)
1080 if (!pci_msi_enable
|| !dev
)
1083 if (dev
->msi_enabled
|| dev
->msix_enabled
)
1087 void pci_no_msi(void)
1093 * pci_msi_enabled - is MSI enabled?
1095 * Returns true if MSI has not been disabled by the command-line option
1098 int pci_msi_enabled(void)
1100 return pci_msi_enable
;
1102 EXPORT_SYMBOL(pci_msi_enabled
);
1104 void pci_msi_init_pci_dev(struct pci_dev
*dev
)
1106 INIT_LIST_HEAD(&dev
->msi_list
);
1108 /* Disable the msi hardware to avoid screaming interrupts
1109 * during boot. This is the power on reset default so
1110 * usually this should be a noop.
1112 dev
->msi_cap
= pci_find_capability(dev
, PCI_CAP_ID_MSI
);
1114 msi_set_enable(dev
, 0);
1116 dev
->msix_cap
= pci_find_capability(dev
, PCI_CAP_ID_MSIX
);
1118 msix_set_enable(dev
, 0);
1122 * pci_enable_msi_range - configure device's MSI capability structure
1123 * @dev: device to configure
1124 * @minvec: minimal number of interrupts to configure
1125 * @maxvec: maximum number of interrupts to configure
1127 * This function tries to allocate a maximum possible number of interrupts in a
1128 * range between @minvec and @maxvec. It returns a negative errno if an error
1129 * occurs. If it succeeds, it returns the actual number of interrupts allocated
1130 * and updates the @dev's irq member to the lowest new interrupt number;
1131 * the other interrupt numbers allocated to this device are consecutive.
1133 int pci_enable_msi_range(struct pci_dev
*dev
, int minvec
, int maxvec
)
1138 if (maxvec
< minvec
)
1142 rc
= pci_enable_msi_block(dev
, nvec
);
1145 } else if (rc
> 0) {
1154 EXPORT_SYMBOL(pci_enable_msi_range
);
1157 * pci_enable_msix_range - configure device's MSI-X capability structure
1158 * @dev: pointer to the pci_dev data structure of MSI-X device function
1159 * @entries: pointer to an array of MSI-X entries
1160 * @minvec: minimum number of MSI-X irqs requested
1161 * @maxvec: maximum number of MSI-X irqs requested
1163 * Setup the MSI-X capability structure of device function with a maximum
1164 * possible number of interrupts in the range between @minvec and @maxvec
1165 * upon its software driver call to request for MSI-X mode enabled on its
1166 * hardware device function. It returns a negative errno if an error occurs.
1167 * If it succeeds, it returns the actual number of interrupts allocated and
1168 * indicates the successful configuration of MSI-X capability structure
1169 * with new allocated MSI-X interrupts.
1171 int pci_enable_msix_range(struct pci_dev
*dev
, struct msix_entry
*entries
,
1172 int minvec
, int maxvec
)
1177 if (maxvec
< minvec
)
1181 rc
= pci_enable_msix(dev
, entries
, nvec
);
1184 } else if (rc
> 0) {
1193 EXPORT_SYMBOL(pci_enable_msix_range
);