drivers/pcmcia/Kconfig

   1 #
   2 # PCCARD (PCMCIA/CardBus) bus subsystem configuration
   3 #
   4
   5 menuconfig PCCARD
   6         tristate "PCCard (PCMCIA/CardBus) support"
   7         depends on HOTPLUG
   8         ---help---
   9           Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
  10           computer.  These are credit-card size devices such as network cards,
  11           modems or hard drives often used with laptops computers.  There are
  12           actually two varieties of these cards: 16 bit PCMCIA and 32 bit
  13           CardBus cards.
  14
  15           To compile this driver as modules, choose M here: the
  16           module will be called pcmcia_core.
  17
  18 if PCCARD
  19
  20 config PCMCIA_DEBUG
  21         bool "Enable PCCARD debugging"
  22         help
  23           Say Y here to enable PCMCIA subsystem debugging.  You
  24           will need to choose the debugging level either via the
  25           kernel command line, or module options depending whether
  26           you build the PCMCIA as modules.
  27
  28           The kernel command line options are:
  29             pcmcia_core.pc_debug=N
  30             pcmcia.pc_debug=N
  31             sa11xx_core.pc_debug=N
  32
  33           The module option is called pc_debug=N
  34
  35           In all the above examples, N is the debugging verbosity
  36           level.
  37
  38 config PCMCIA
  39         tristate "16-bit PCMCIA support"
  40         select CRC32
  41         select HAVE_IDE
  42         default y
  43         ---help---
  44            This option enables support for 16-bit PCMCIA cards. Most older
  45            PC-cards are such 16-bit PCMCIA cards, so unless you know you're
  46            only using 32-bit CardBus cards, say Y or M here.
  47
  48            To use 16-bit PCMCIA cards, you will need supporting software in
  49            most cases. (see the file <file:Documentation/Changes> for
  50            location and details).
  51
  52            To compile this driver as modules, choose M here: the
  53            module will be called pcmcia.
  54
  55            If unsure, say Y.
  56
  57 config PCMCIA_LOAD_CIS
  58         bool "Load CIS updates from userspace (EXPERIMENTAL)"
  59         depends on PCMCIA && EXPERIMENTAL
  60         select FW_LOADER
  61         default y
  62         help
  63           Some PCMCIA cards require an updated Card Information Structure (CIS)
  64           to be loaded from userspace to work correctly. If you say Y here,
  65           and your userspace is arranged correctly, this will be loaded
  66           automatically using the in-kernel firmware loader and the hotplug
  67           subsystem, instead of relying on cardmgr from pcmcia-cs to do so.
  68
  69           If unsure, say Y.
  70
  71 config PCMCIA_IOCTL
  72         bool "PCMCIA control ioctl (obsolete)"
  73         depends on PCMCIA
  74         default y
  75         help
  76           If you say Y here, the deprecated ioctl interface to the PCMCIA
  77           subsystem will be built. It is needed by cardmgr and cardctl
  78           (pcmcia-cs) to function properly.
  79
  80           You should use the new pcmciautils package instead (see
  81           <file:Documentation/Changes> for location and details).
  82
  83           If unsure, say Y.
  84
  85 config CARDBUS
  86         bool "32-bit CardBus support"
  87         depends on PCI
  88         default y
  89         ---help---
  90           CardBus is a bus mastering architecture for PC-cards, which allows
  91           for 32 bit PC-cards (the original PCMCIA standard specifies only
  92           a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.
  93
  94           To use 32 bit PC-cards, you also need a CardBus compatible host
  95           bridge. Virtually all modern PCMCIA bridges do this, and most of
  96           them are "yenta-compatible", so say Y or M there, too.
  97
  98           If unsure, say Y.
  99
 100 comment "PC-card bridges"
 101
 102 config YENTA
 103         tristate "CardBus yenta-compatible bridge support"
 104         depends on PCI
 105         select CARDBUS if !EMBEDDED
 106         select PCCARD_NONSTATIC
 107         ---help---
 108           This option enables support for CardBus host bridges.  Virtually
 109           all modern PCMCIA bridges are CardBus compatible.  A "bridge" is
 110           the hardware inside your computer that PCMCIA cards are plugged
 111           into.
 112
 113           To compile this driver as modules, choose M here: the
 114           module will be called yenta_socket.
 115
 116           If unsure, say Y.
 117
 118 config YENTA_O2
 119         default y
 120         bool "Special initialization for O2Micro bridges" if EMBEDDED
 121         depends on YENTA
 122
 123 config YENTA_RICOH
 124         default y
 125         bool "Special initialization for Ricoh bridges" if EMBEDDED
 126         depends on YENTA
 127
 128 config YENTA_TI
 129         default y
 130         bool "Special initialization for TI and EnE bridges" if EMBEDDED
 131         depends on YENTA
 132
 133 config YENTA_ENE_TUNE
 134         default y
 135         bool "Auto-tune EnE bridges for CB cards" if EMBEDDED
 136         depends on YENTA_TI && CARDBUS
 137
 138 config YENTA_TOSHIBA
 139         default y
 140         bool "Special initialization for Toshiba ToPIC bridges" if EMBEDDED
 141         depends on YENTA
 142
 143 config PD6729
 144         tristate "Cirrus PD6729 compatible bridge support"
 145         depends on PCMCIA && PCI
 146         select PCCARD_NONSTATIC
 147         help
 148           This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
 149           device, found in some older laptops and PCMCIA card readers.
 150
 151 config I82092
 152         tristate "i82092 compatible bridge support"
 153         depends on PCMCIA && PCI
 154         select PCCARD_NONSTATIC
 155         help
 156           This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
 157           found in some older laptops and more commonly in evaluation boards for the
 158           chip.
 159
 160 config I82365
 161         tristate "i82365 compatible bridge support"
 162         depends on PCMCIA && ISA
 163         select PCCARD_NONSTATIC
 164         help
 165           Say Y here to include support for ISA-bus PCMCIA host bridges that
 166           are register compatible with the Intel i82365.  These are found on
 167           older laptops and ISA-bus card readers for desktop systems.  A
 168           "bridge" is the hardware inside your computer that PCMCIA cards are
 169           plugged into. If unsure, say N.
 170
 171 config TCIC
 172         tristate "Databook TCIC host bridge support"
 173         depends on PCMCIA && ISA
 174         select PCCARD_NONSTATIC
 175         help
 176           Say Y here to include support for the Databook TCIC family of PCMCIA
 177           host bridges. These are only found on a handful of old systems.
 178           "Bridge" is the name used for the hardware inside your computer that
 179           PCMCIA cards are plugged into. If unsure, say N.
 180
 181 config PCMCIA_M8XX
 182         tristate "MPC8xx PCMCIA support"
 183         depends on PCMCIA && PPC && 8xx
 184         select PCCARD_IODYN
 185         select PCCARD_NONSTATIC
 186         help
 187           Say Y here to include support for PowerPC 8xx series PCMCIA
 188           controller.
 189
 190           This driver is also available as a module called m8xx_pcmcia.
 191
 192 config HD64465_PCMCIA
 193         tristate "HD64465 host bridge support"
 194         depends on HD64465 && PCMCIA
 195
 196 config PCMCIA_AU1X00
 197         tristate "Au1x00 pcmcia support"
 198         depends on SOC_AU1X00 && PCMCIA
 199
 200 config PCMCIA_SA1100
 201         tristate "SA1100 support"
 202         depends on ARM && ARCH_SA1100 && PCMCIA
 203         depends on ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL || MACH_ARMCORE
 204         help
 205           Say Y here to include support for SA11x0-based PCMCIA or CF
 206           sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
 207           Xscale(R) embedded machines.
 208
 209           This driver is also available as a module called sa1100_cs.
 210
 211 config PCMCIA_SA1111
 212         tristate "SA1111 support"
 213         depends on ARM && ARCH_SA1100 && SA1111 && PCMCIA
 214         help
 215           Say Y  here to include support for SA1111-based PCMCIA or CF
 216           sockets, found on the Jornada 720, Graphicsmaster and other
 217           StrongARM(R)/Xscale(R) embedded machines.
 218
 219           This driver is also available as a module called sa1111_cs.
 220
 221 config PCMCIA_PXA2XX
 222         tristate "PXA2xx support"
 223         depends on ARM && ARCH_PXA && PCMCIA
 224         help
 225           Say Y here to include support for the PXA2xx PCMCIA controller
 226
 227 config PCMCIA_PROBE
 228         bool
 229         default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X && !PARISC
 230
 231 config M32R_PCC
 232         bool "M32R PCMCIA I/F"
 233         depends on M32R && CHIP_M32700 && PCMCIA
 234         select PCCARD_NONSTATIC
 235         help
 236           Say Y here to use the M32R PCMCIA controller.
 237
 238 config M32R_CFC
 239         bool "M32R CF I/F Controller"
 240         depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT)
 241         select PCCARD_NONSTATIC
 242         help
 243           Say Y here to use the M32R CompactFlash controller.
 244
 245 config M32R_CFC_NUM
 246         int "M32R CF I/F number"
 247         depends on M32R_CFC
 248         default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT
 249         help
 250           Set the number of M32R CF slots.
 251
 252 config PCMCIA_VRC4171
 253         tristate "NEC VRC4171 Card Controllers support"
 254         depends on CPU_VR41XX && ISA && PCMCIA
 255
 256 config PCMCIA_VRC4173
 257         tristate "NEC VRC4173 CARDU support"
 258         depends on CPU_VR41XX && PCI && PCMCIA
 259
 260 config OMAP_CF
 261         tristate "OMAP CompactFlash Controller"
 262         depends on PCMCIA && ARCH_OMAP16XX
 263         help
 264           Say Y here to support the CompactFlash controller on OMAP.
 265           Note that this doesn't support "True IDE" mode.
 266
 267 config AT91_CF
 268         tristate "AT91 CompactFlash Controller"
 269         depends on PCMCIA && ARCH_AT91RM9200
 270         help
 271           Say Y here to support the CompactFlash controller on AT91 chips.
 272           Or choose M to compile the driver as a module named "at91_cf".
 273
 274 config ELECTRA_CF
 275         tristate "Electra CompactFlash Controller"
 276         depends on PCMCIA && PPC_PASEMI
 277         help
 278           Say Y here to support the CompactFlash controller on the
 279           PA Semi Electra eval board.
 280
 281 config PCCARD_NONSTATIC
 282         tristate
 283
 284 config PCCARD_IODYN
 285         bool
 286
 287 endif   # PCCARD