drivers/phy/Kconfig

   1 #
   2 # PHY
   3 #
   4
   5 menu "PHY Subsystem"
   6
   7 config GENERIC_PHY
   8         bool "PHY Core"
   9         help
  10           Generic PHY support.
  11
  12           This framework is designed to provide a generic interface for PHY
  13           devices present in the kernel. This layer will have the generic
  14           API by which phy drivers can create PHY using the phy framework and
  15           phy users can obtain reference to the PHY. All the users of this
  16           framework should select this config.
  17
  18 config PHY_BERLIN_SATA
  19         tristate "Marvell Berlin SATA PHY driver"
  20         depends on ARCH_BERLIN && HAS_IOMEM && OF
  21         select GENERIC_PHY
  22         help
  23           Enable this to support the SATA PHY on Marvell Berlin SoCs.
  24
  25 config PHY_EXYNOS_MIPI_VIDEO
  26         tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
  27         depends on HAS_IOMEM
  28         depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
  29         select GENERIC_PHY
  30         default y if ARCH_S5PV210 || ARCH_EXYNOS
  31         help
  32           Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
  33           and EXYNOS SoCs.
  34
  35 config PHY_MVEBU_SATA
  36         def_bool y
  37         depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
  38         depends on OF
  39         select GENERIC_PHY
  40
  41 config PHY_MIPHY365X
  42         tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series"
  43         depends on ARCH_STI
  44         depends on GENERIC_PHY
  45         depends on HAS_IOMEM
  46         depends on OF
  47         help
  48           Enable this to support the miphy transceiver (for SATA/PCIE)
  49           that is part of STMicroelectronics STiH41x SoC series.
  50
  51 config OMAP_CONTROL_PHY
  52         tristate "OMAP CONTROL PHY Driver"
  53         depends on ARCH_OMAP2PLUS || COMPILE_TEST
  54         help
  55           Enable this to add support for the PHY part present in the control
  56           module. This driver has API to power on the USB2 PHY and to write to
  57           the mailbox. The mailbox is present only in omap4 and the register to
  58           power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
  59           additional register to power on USB3 PHY/SATA PHY/PCIE PHY
  60           (PIPE3 PHY).
  61
  62 config OMAP_USB2
  63         tristate "OMAP USB2 PHY Driver"
  64         depends on ARCH_OMAP2PLUS
  65         depends on USB_PHY
  66         select GENERIC_PHY
  67         select OMAP_CONTROL_PHY
  68         depends on OMAP_OCP2SCP
  69         help
  70           Enable this to support the transceiver that is part of SOC. This
  71           driver takes care of all the PHY functionality apart from comparator.
  72           The USB OTG controller communicates with the comparator using this
  73           driver.
  74
  75 config TI_PIPE3
  76         tristate "TI PIPE3 PHY Driver"
  77         depends on ARCH_OMAP2PLUS || COMPILE_TEST
  78         select GENERIC_PHY
  79         select OMAP_CONTROL_PHY
  80         depends on OMAP_OCP2SCP
  81         help
  82           Enable this to support the PIPE3 PHY that is part of TI SOCs. This
  83           driver takes care of all the PHY functionality apart from comparator.
  84           This driver interacts with the "OMAP Control PHY Driver" to power
  85           on/off the PHY.
  86
  87 config TWL4030_USB
  88         tristate "TWL4030 USB Transceiver Driver"
  89         depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
  90         depends on USB_PHY
  91         select GENERIC_PHY
  92         help
  93           Enable this to support the USB OTG transceiver on TWL4030
  94           family chips (including the TWL5030 and TPS659x0 devices).
  95           This transceiver supports high and full speed devices plus,
  96           in host mode, low speed.
  97
  98 config PHY_EXYNOS_DP_VIDEO
  99         tristate "EXYNOS SoC series Display Port PHY driver"
 100         depends on OF
 101         depends on ARCH_EXYNOS || COMPILE_TEST
 102         default ARCH_EXYNOS
 103         select GENERIC_PHY
 104         help
 105           Support for Display Port PHY found on Samsung EXYNOS SoCs.
 106
 107 config BCM_KONA_USB2_PHY
 108         tristate "Broadcom Kona USB2 PHY Driver"
 109         depends on HAS_IOMEM
 110         select GENERIC_PHY
 111         help
 112           Enable this to support the Broadcom Kona USB 2.0 PHY.
 113
 114 config PHY_EXYNOS5250_SATA
 115         tristate "Exynos5250 Sata SerDes/PHY driver"
 116         depends on SOC_EXYNOS5250
 117         depends on HAS_IOMEM
 118         depends on OF
 119         select GENERIC_PHY
 120         select I2C
 121         select I2C_S3C2410
 122         select MFD_SYSCON
 123         help
 124           Enable this to support SATA SerDes/Phy found on Samsung's
 125           Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
 126           SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
 127           port to accept one SATA device.
 128
 129 config PHY_HIX5HD2_SATA
 130         tristate "HIX5HD2 SATA PHY Driver"
 131         depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
 132         select GENERIC_PHY
 133         select MFD_SYSCON
 134         help
 135           Support for SATA PHY on Hisilicon hix5hd2 Soc.
 136
 137 config PHY_SUN4I_USB
 138         tristate "Allwinner sunxi SoC USB PHY driver"
 139         depends on ARCH_SUNXI && HAS_IOMEM && OF
 140         depends on RESET_CONTROLLER
 141         select GENERIC_PHY
 142         help
 143           Enable this to support the transceiver that is part of Allwinner
 144           sunxi SoCs.
 145
 146           This driver controls the entire USB PHY block, both the USB OTG
 147           parts, as well as the 2 regular USB 2 host PHYs.
 148
 149 config PHY_SAMSUNG_USB2
 150         tristate "Samsung USB 2.0 PHY driver"
 151         depends on HAS_IOMEM
 152         depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
 153         select GENERIC_PHY
 154         select MFD_SYSCON
 155         default ARCH_EXYNOS
 156         help
 157           Enable this to support the Samsung USB 2.0 PHY driver for Samsung
 158           SoCs. This driver provides the interface for USB 2.0 PHY. Support
 159           for particular PHYs will be enabled based on the SoC type in addition
 160           to this driver.
 161
 162 config PHY_S5PV210_USB2
 163         bool "Support for S5PV210"
 164         depends on PHY_SAMSUNG_USB2
 165         depends on ARCH_S5PV210
 166         help
 167           Enable USB PHY support for S5PV210. This option requires that Samsung
 168           USB 2.0 PHY driver is enabled and means that support for this
 169           particular SoC is compiled in the driver. In case of S5PV210 two phys
 170           are available - device and host.
 171
 172 config PHY_EXYNOS4210_USB2
 173         bool
 174         depends on PHY_SAMSUNG_USB2
 175         default CPU_EXYNOS4210
 176
 177 config PHY_EXYNOS4X12_USB2
 178         bool
 179         depends on PHY_SAMSUNG_USB2
 180         default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
 181
 182 config PHY_EXYNOS5250_USB2
 183         bool
 184         depends on PHY_SAMSUNG_USB2
 185         default SOC_EXYNOS5250 || SOC_EXYNOS5420
 186
 187 config PHY_EXYNOS5_USBDRD
 188         tristate "Exynos5 SoC series USB DRD PHY driver"
 189         depends on ARCH_EXYNOS5 && OF
 190         depends on HAS_IOMEM
 191         depends on USB_DWC3_EXYNOS
 192         select GENERIC_PHY
 193         select MFD_SYSCON
 194         default y
 195         help
 196           Enable USB DRD PHY support for Exynos 5 SoC series.
 197           This driver provides PHY interface for USB 3.0 DRD controller
 198           present on Exynos5 SoC series.
 199
 200 config PHY_QCOM_APQ8064_SATA
 201         tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
 202         depends on ARCH_QCOM
 203         depends on HAS_IOMEM
 204         depends on OF
 205         select GENERIC_PHY
 206
 207 config PHY_QCOM_IPQ806X_SATA
 208         tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
 209         depends on ARCH_QCOM
 210         depends on HAS_IOMEM
 211         depends on OF
 212         select GENERIC_PHY
 213
 214 config PHY_ST_SPEAR1310_MIPHY
 215         tristate "ST SPEAR1310-MIPHY driver"
 216         select GENERIC_PHY
 217         help
 218           Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
 219
 220 config PHY_ST_SPEAR1340_MIPHY
 221         tristate "ST SPEAR1340-MIPHY driver"
 222         select GENERIC_PHY
 223         help
 224           Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
 225
 226 config PHY_XGENE
 227         tristate "APM X-Gene 15Gbps PHY support"
 228         depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST)
 229         select GENERIC_PHY
 230         help
 231           This option enables support for APM X-Gene SoC multi-purpose PHY.
 232
 233 endmenu