drivers/phy/Kconfig

   1 #
   2 # PHY
   3 #
   4
   5 menu "PHY Subsystem"
   6
   7 config GENERIC_PHY
   8         bool "PHY Core"
   9         help
  10           Generic PHY support.
  11
  12           This framework is designed to provide a generic interface for PHY
  13           devices present in the kernel. This layer will have the generic
  14           API by which phy drivers can create PHY using the phy framework and
  15           phy users can obtain reference to the PHY. All the users of this
  16           framework should select this config.
  17
  18 config PHY_EXYNOS_MIPI_VIDEO
  19         tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
  20         depends on HAS_IOMEM
  21         depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
  22         select GENERIC_PHY
  23         default y if ARCH_S5PV210 || ARCH_EXYNOS
  24         help
  25           Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
  26           and EXYNOS SoCs.
  27
  28 config PHY_MVEBU_SATA
  29         def_bool y
  30         depends on ARCH_KIRKWOOD || ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
  31         depends on OF
  32         select GENERIC_PHY
  33
  34 config OMAP_CONTROL_PHY
  35         tristate "OMAP CONTROL PHY Driver"
  36         help
  37           Enable this to add support for the PHY part present in the control
  38           module. This driver has API to power on the USB2 PHY and to write to
  39           the mailbox. The mailbox is present only in omap4 and the register to
  40           power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
  41           additional register to power on USB3 PHY/SATA PHY/PCIE PHY
  42           (PIPE3 PHY).
  43
  44 config OMAP_USB2
  45         tristate "OMAP USB2 PHY Driver"
  46         depends on ARCH_OMAP2PLUS
  47         depends on USB_PHY
  48         select GENERIC_PHY
  49         select OMAP_CONTROL_PHY
  50         depends on OMAP_OCP2SCP
  51         help
  52           Enable this to support the transceiver that is part of SOC. This
  53           driver takes care of all the PHY functionality apart from comparator.
  54           The USB OTG controller communicates with the comparator using this
  55           driver.
  56
  57 config TI_PIPE3
  58         tristate "TI PIPE3 PHY Driver"
  59         depends on ARCH_OMAP2PLUS || COMPILE_TEST
  60         select GENERIC_PHY
  61         select OMAP_CONTROL_PHY
  62         depends on OMAP_OCP2SCP
  63         help
  64           Enable this to support the PIPE3 PHY that is part of TI SOCs. This
  65           driver takes care of all the PHY functionality apart from comparator.
  66           This driver interacts with the "OMAP Control PHY Driver" to power
  67           on/off the PHY.
  68
  69 config TWL4030_USB
  70         tristate "TWL4030 USB Transceiver Driver"
  71         depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
  72         depends on USB_PHY
  73         select GENERIC_PHY
  74         help
  75           Enable this to support the USB OTG transceiver on TWL4030
  76           family chips (including the TWL5030 and TPS659x0 devices).
  77           This transceiver supports high and full speed devices plus,
  78           in host mode, low speed.
  79
  80 config PHY_EXYNOS_DP_VIDEO
  81         tristate "EXYNOS SoC series Display Port PHY driver"
  82         depends on OF
  83         depends on ARCH_EXYNOS || COMPILE_TEST
  84         default ARCH_EXYNOS
  85         select GENERIC_PHY
  86         help
  87           Support for Display Port PHY found on Samsung EXYNOS SoCs.
  88
  89 config BCM_KONA_USB2_PHY
  90         tristate "Broadcom Kona USB2 PHY Driver"
  91         depends on GENERIC_PHY
  92         depends on HAS_IOMEM
  93         help
  94           Enable this to support the Broadcom Kona USB 2.0 PHY.
  95
  96 config PHY_EXYNOS5250_SATA
  97         tristate "Exynos5250 Sata SerDes/PHY driver"
  98         depends on SOC_EXYNOS5250
  99         depends on HAS_IOMEM
 100         depends on OF
 101         select GENERIC_PHY
 102         select I2C
 103         select I2C_S3C2410
 104         select MFD_SYSCON
 105         help
 106           Enable this to support SATA SerDes/Phy found on Samsung's
 107           Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
 108           SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
 109           port to accept one SATA device.
 110
 111 config PHY_SUN4I_USB
 112         tristate "Allwinner sunxi SoC USB PHY driver"
 113         depends on ARCH_SUNXI && HAS_IOMEM && OF
 114         select GENERIC_PHY
 115         help
 116           Enable this to support the transceiver that is part of Allwinner
 117           sunxi SoCs.
 118
 119           This driver controls the entire USB PHY block, both the USB OTG
 120           parts, as well as the 2 regular USB 2 host PHYs.
 121
 122 config PHY_SAMSUNG_USB2
 123         tristate "Samsung USB 2.0 PHY driver"
 124         select GENERIC_PHY
 125         select MFD_SYSCON
 126         help
 127           Enable this to support the Samsung USB 2.0 PHY driver for Samsung
 128           SoCs. This driver provides the interface for USB 2.0 PHY. Support for
 129           particular SoCs has to be enabled in addition to this driver. Number
 130           and type of supported phys depends on the SoC.
 131
 132 config PHY_EXYNOS4210_USB2
 133         bool "Support for Exynos 4210"
 134         depends on PHY_SAMSUNG_USB2
 135         depends on CPU_EXYNOS4210
 136         help
 137           Enable USB PHY support for Exynos 4210. This option requires that
 138           Samsung USB 2.0 PHY driver is enabled and means that support for this
 139           particular SoC is compiled in the driver. In case of Exynos 4210 four
 140           phys are available - device, host, HSIC0 and HSIC1.
 141
 142 config PHY_EXYNOS4X12_USB2
 143         bool "Support for Exynos 4x12"
 144         depends on PHY_SAMSUNG_USB2
 145         depends on (SOC_EXYNOS4212 || SOC_EXYNOS4412)
 146         help
 147           Enable USB PHY support for Exynos 4x12. This option requires that
 148           Samsung USB 2.0 PHY driver is enabled and means that support for this
 149           particular SoC is compiled in the driver. In case of Exynos 4x12 four
 150           phys are available - device, host, HSIC0 and HSIC1.
 151
 152 config PHY_EXYNOS5250_USB2
 153         bool "Support for Exynos 5250"
 154         depends on PHY_SAMSUNG_USB2
 155         depends on SOC_EXYNOS5250
 156         help
 157           Enable USB PHY support for Exynos 5250. This option requires that
 158           Samsung USB 2.0 PHY driver is enabled and means that support for this
 159           particular SoC is compiled in the driver. In case of Exynos 5250 four
 160           phys are available - device, host, HSIC0 and HSIC.
 161
 162 config PHY_XGENE
 163         tristate "APM X-Gene 15Gbps PHY support"
 164         depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST)
 165         select GENERIC_PHY
 166         help
 167           This option enables support for APM X-Gene SoC multi-purpose PHY.
 168
 169 endmenu