drivers/phy/Kconfig

   1 #
   2 # PHY
   3 #
   4
   5 menu "PHY Subsystem"
   6
   7 config GENERIC_PHY
   8         bool "PHY Core"
   9         help
  10           Generic PHY support.
  11
  12           This framework is designed to provide a generic interface for PHY
  13           devices present in the kernel. This layer will have the generic
  14           API by which phy drivers can create PHY using the phy framework and
  15           phy users can obtain reference to the PHY. All the users of this
  16           framework should select this config.
  17
  18 config PHY_BERLIN_USB
  19         tristate "Marvell Berlin USB PHY Driver"
  20         depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
  21         select GENERIC_PHY
  22         help
  23           Enable this to support the USB PHY on Marvell Berlin SoCs.
  24
  25 config PHY_BERLIN_SATA
  26         tristate "Marvell Berlin SATA PHY driver"
  27         depends on ARCH_BERLIN && HAS_IOMEM && OF
  28         select GENERIC_PHY
  29         help
  30           Enable this to support the SATA PHY on Marvell Berlin SoCs.
  31
  32 config ARMADA375_USBCLUSTER_PHY
  33         def_bool y
  34         depends on MACH_ARMADA_375 || COMPILE_TEST
  35         depends on OF
  36         select GENERIC_PHY
  37
  38 config PHY_DM816X_USB
  39         tristate "TI dm816x USB PHY driver"
  40         depends on ARCH_OMAP2PLUS
  41         depends on USB_SUPPORT
  42         select GENERIC_PHY
  43         select USB_PHY
  44         help
  45           Enable this for dm816x USB to work.
  46
  47 config PHY_EXYNOS_MIPI_VIDEO
  48         tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
  49         depends on HAS_IOMEM
  50         depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
  51         select GENERIC_PHY
  52         default y if ARCH_S5PV210 || ARCH_EXYNOS
  53         help
  54           Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
  55           and EXYNOS SoCs.
  56
  57 config PHY_LPC18XX_USB_OTG
  58         tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
  59         depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
  60         depends on MFD_SYSCON
  61         select GENERIC_PHY
  62         help
  63           Enable this to support NXP LPC18xx/43xx internal USB OTG PHY.
  64
  65           This driver is need for USB0 support on LPC18xx/43xx and takes
  66           care of enabling and clock setup.
  67
  68 config PHY_PXA_28NM_HSIC
  69         tristate "Marvell USB HSIC 28nm PHY Driver"
  70         depends on HAS_IOMEM
  71         select GENERIC_PHY
  72         help
  73           Enable this to support Marvell USB HSIC PHY driver for Marvell
  74           SoC. This driver will do the PHY initialization and shutdown.
  75           The PHY driver will be used by Marvell ehci driver.
  76
  77           To compile this driver as a module, choose M here.
  78
  79 config PHY_PXA_28NM_USB2
  80         tristate "Marvell USB 2.0 28nm PHY Driver"
  81         depends on HAS_IOMEM
  82         select GENERIC_PHY
  83         help
  84           Enable this to support Marvell USB 2.0 PHY driver for Marvell
  85           SoC. This driver will do the PHY initialization and shutdown.
  86           The PHY driver will be used by Marvell udc/ehci/otg driver.
  87
  88           To compile this driver as a module, choose M here.
  89
  90 config PHY_MVEBU_SATA
  91         def_bool y
  92         depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
  93         depends on OF
  94         select GENERIC_PHY
  95
  96 config PHY_MIPHY28LP
  97         tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407"
  98         depends on ARCH_STI
  99         select GENERIC_PHY
 100         help
 101           Enable this to support the miphy transceiver (for SATA/PCIE/USB3)
 102           that is part of STMicroelectronics STiH407 SoC.
 103
 104 config PHY_MIPHY365X
 105         tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series"
 106         depends on ARCH_STI
 107         depends on HAS_IOMEM
 108         depends on OF
 109         select GENERIC_PHY
 110         help
 111           Enable this to support the miphy transceiver (for SATA/PCIE)
 112           that is part of STMicroelectronics STiH41x SoC series.
 113
 114 config PHY_RCAR_GEN2
 115         tristate "Renesas R-Car generation 2 USB PHY driver"
 116         depends on ARCH_SHMOBILE
 117         depends on GENERIC_PHY
 118         help
 119           Support for USB PHY found on Renesas R-Car generation 2 SoCs.
 120
 121 config OMAP_CONTROL_PHY
 122         tristate "OMAP CONTROL PHY Driver"
 123         depends on ARCH_OMAP2PLUS || COMPILE_TEST
 124         help
 125           Enable this to add support for the PHY part present in the control
 126           module. This driver has API to power on the USB2 PHY and to write to
 127           the mailbox. The mailbox is present only in omap4 and the register to
 128           power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
 129           additional register to power on USB3 PHY/SATA PHY/PCIE PHY
 130           (PIPE3 PHY).
 131
 132 config OMAP_USB2
 133         tristate "OMAP USB2 PHY Driver"
 134         depends on ARCH_OMAP2PLUS
 135         depends on USB_SUPPORT
 136         select GENERIC_PHY
 137         select USB_PHY
 138         select OMAP_CONTROL_PHY
 139         depends on OMAP_OCP2SCP
 140         help
 141           Enable this to support the transceiver that is part of SOC. This
 142           driver takes care of all the PHY functionality apart from comparator.
 143           The USB OTG controller communicates with the comparator using this
 144           driver.
 145
 146 config TI_PIPE3
 147         tristate "TI PIPE3 PHY Driver"
 148         depends on ARCH_OMAP2PLUS || COMPILE_TEST
 149         select GENERIC_PHY
 150         select OMAP_CONTROL_PHY
 151         depends on OMAP_OCP2SCP
 152         help
 153           Enable this to support the PIPE3 PHY that is part of TI SOCs. This
 154           driver takes care of all the PHY functionality apart from comparator.
 155           This driver interacts with the "OMAP Control PHY Driver" to power
 156           on/off the PHY.
 157
 158 config TWL4030_USB
 159         tristate "TWL4030 USB Transceiver Driver"
 160         depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
 161         depends on USB_SUPPORT
 162         select GENERIC_PHY
 163         select USB_PHY
 164         help
 165           Enable this to support the USB OTG transceiver on TWL4030
 166           family chips (including the TWL5030 and TPS659x0 devices).
 167           This transceiver supports high and full speed devices plus,
 168           in host mode, low speed.
 169
 170 config PHY_EXYNOS_DP_VIDEO
 171         tristate "EXYNOS SoC series Display Port PHY driver"
 172         depends on OF
 173         depends on ARCH_EXYNOS || COMPILE_TEST
 174         default ARCH_EXYNOS
 175         select GENERIC_PHY
 176         help
 177           Support for Display Port PHY found on Samsung EXYNOS SoCs.
 178
 179 config BCM_KONA_USB2_PHY
 180         tristate "Broadcom Kona USB2 PHY Driver"
 181         depends on HAS_IOMEM
 182         select GENERIC_PHY
 183         help
 184           Enable this to support the Broadcom Kona USB 2.0 PHY.
 185
 186 config PHY_EXYNOS5250_SATA
 187         tristate "Exynos5250 Sata SerDes/PHY driver"
 188         depends on SOC_EXYNOS5250
 189         depends on HAS_IOMEM
 190         depends on OF
 191         select GENERIC_PHY
 192         select I2C
 193         select I2C_S3C2410
 194         select MFD_SYSCON
 195         help
 196           Enable this to support SATA SerDes/Phy found on Samsung's
 197           Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
 198           SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
 199           port to accept one SATA device.
 200
 201 config PHY_HIX5HD2_SATA
 202         tristate "HIX5HD2 SATA PHY Driver"
 203         depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
 204         select GENERIC_PHY
 205         select MFD_SYSCON
 206         help
 207           Support for SATA PHY on Hisilicon hix5hd2 Soc.
 208
 209 config PHY_SUN4I_USB
 210         tristate "Allwinner sunxi SoC USB PHY driver"
 211         depends on ARCH_SUNXI && HAS_IOMEM && OF
 212         depends on RESET_CONTROLLER
 213         depends on EXTCON
 214         depends on POWER_SUPPLY
 215         select GENERIC_PHY
 216         help
 217           Enable this to support the transceiver that is part of Allwinner
 218           sunxi SoCs.
 219
 220           This driver controls the entire USB PHY block, both the USB OTG
 221           parts, as well as the 2 regular USB 2 host PHYs.
 222
 223 config PHY_SUN9I_USB
 224         tristate "Allwinner sun9i SoC USB PHY driver"
 225         depends on ARCH_SUNXI && HAS_IOMEM && OF
 226         depends on RESET_CONTROLLER
 227         select GENERIC_PHY
 228         help
 229           Enable this to support the transceiver that is part of Allwinner
 230           sun9i SoCs.
 231
 232           This driver controls each individual USB 2 host PHY.
 233
 234 config PHY_SAMSUNG_USB2
 235         tristate "Samsung USB 2.0 PHY driver"
 236         depends on HAS_IOMEM
 237         depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
 238         select GENERIC_PHY
 239         select MFD_SYSCON
 240         default ARCH_EXYNOS
 241         help
 242           Enable this to support the Samsung USB 2.0 PHY driver for Samsung
 243           SoCs. This driver provides the interface for USB 2.0 PHY. Support
 244           for particular PHYs will be enabled based on the SoC type in addition
 245           to this driver.
 246
 247 config PHY_S5PV210_USB2
 248         bool "Support for S5PV210"
 249         depends on PHY_SAMSUNG_USB2
 250         depends on ARCH_S5PV210
 251         help
 252           Enable USB PHY support for S5PV210. This option requires that Samsung
 253           USB 2.0 PHY driver is enabled and means that support for this
 254           particular SoC is compiled in the driver. In case of S5PV210 two phys
 255           are available - device and host.
 256
 257 config PHY_EXYNOS4210_USB2
 258         bool
 259         depends on PHY_SAMSUNG_USB2
 260         default CPU_EXYNOS4210
 261
 262 config PHY_EXYNOS4X12_USB2
 263         bool
 264         depends on PHY_SAMSUNG_USB2
 265         default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
 266
 267 config PHY_EXYNOS5250_USB2
 268         bool
 269         depends on PHY_SAMSUNG_USB2
 270         default SOC_EXYNOS5250 || SOC_EXYNOS5420
 271
 272 config PHY_EXYNOS5_USBDRD
 273         tristate "Exynos5 SoC series USB DRD PHY driver"
 274         depends on ARCH_EXYNOS && OF
 275         depends on HAS_IOMEM
 276         depends on USB_DWC3_EXYNOS
 277         select GENERIC_PHY
 278         select MFD_SYSCON
 279         default y
 280         help
 281           Enable USB DRD PHY support for Exynos 5 SoC series.
 282           This driver provides PHY interface for USB 3.0 DRD controller
 283           present on Exynos5 SoC series.
 284
 285 config PHY_PISTACHIO_USB
 286         tristate "IMG Pistachio USB2.0 PHY driver"
 287         depends on MACH_PISTACHIO
 288         select GENERIC_PHY
 289         help
 290           Enable this to support the USB2.0 PHY on the IMG Pistachio SoC.
 291
 292 config PHY_QCOM_APQ8064_SATA
 293         tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
 294         depends on ARCH_QCOM
 295         depends on HAS_IOMEM
 296         depends on OF
 297         select GENERIC_PHY
 298
 299 config PHY_QCOM_IPQ806X_SATA
 300         tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
 301         depends on ARCH_QCOM
 302         depends on HAS_IOMEM
 303         depends on OF
 304         select GENERIC_PHY
 305
 306 config PHY_ROCKCHIP_USB
 307         tristate "Rockchip USB2 PHY Driver"
 308         depends on ARCH_ROCKCHIP && OF
 309         select GENERIC_PHY
 310         help
 311           Enable this to support the Rockchip USB 2.0 PHY.
 312
 313 config PHY_ST_SPEAR1310_MIPHY
 314         tristate "ST SPEAR1310-MIPHY driver"
 315         select GENERIC_PHY
 316         depends on MACH_SPEAR1310 || COMPILE_TEST
 317         help
 318           Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
 319
 320 config PHY_ST_SPEAR1340_MIPHY
 321         tristate "ST SPEAR1340-MIPHY driver"
 322         select GENERIC_PHY
 323         depends on MACH_SPEAR1340 || COMPILE_TEST
 324         help
 325           Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
 326
 327 config PHY_XGENE
 328         tristate "APM X-Gene 15Gbps PHY support"
 329         depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST)
 330         select GENERIC_PHY
 331         help
 332           This option enables support for APM X-Gene SoC multi-purpose PHY.
 333
 334 config PHY_STIH407_USB
 335         tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
 336         depends on RESET_CONTROLLER
 337         depends on ARCH_STI || COMPILE_TEST
 338         select GENERIC_PHY
 339         help
 340           Enable this support to enable the picoPHY device used by USB2
 341           and USB3 controllers on STMicroelectronics STiH407 SoC families.
 342
 343 config PHY_STIH41X_USB
 344         tristate "STMicroelectronics USB2 PHY driver for STiH41x series"
 345         depends on ARCH_STI
 346         select GENERIC_PHY
 347         help
 348           Enable this to support the USB transceiver that is part of
 349           STMicroelectronics STiH41x SoC series.
 350
 351 config PHY_QCOM_UFS
 352         tristate "Qualcomm UFS PHY driver"
 353         depends on OF && ARCH_QCOM
 354         select GENERIC_PHY
 355         help
 356           Support for UFS PHY on QCOM chipsets.
 357
 358 config PHY_TUSB1210
 359         tristate "TI TUSB1210 ULPI PHY module"
 360         depends on USB_ULPI_BUS
 361         select GENERIC_PHY
 362         help
 363           Support for TI TUSB1210 USB ULPI PHY.
 364
 365 config PHY_BRCMSTB_SATA
 366         tristate "Broadcom STB SATA PHY driver"
 367         depends on ARCH_BRCMSTB
 368         depends on OF
 369         select GENERIC_PHY
 370         help
 371           Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs.
 372           Likely useful only with CONFIG_SATA_BRCMSTB enabled.
 373
 374 endmenu