drivers/phy/Kconfig

   1 #
   2 # PHY
   3 #
   4
   5 menu "PHY Subsystem"
   6
   7 config GENERIC_PHY
   8         bool "PHY Core"
   9         help
  10           Generic PHY support.
  11
  12           This framework is designed to provide a generic interface for PHY
  13           devices present in the kernel. This layer will have the generic
  14           API by which phy drivers can create PHY using the phy framework and
  15           phy users can obtain reference to the PHY. All the users of this
  16           framework should select this config.
  17
  18 config PHY_BERLIN_USB
  19         tristate "Marvell Berlin USB PHY Driver"
  20         depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
  21         select GENERIC_PHY
  22         help
  23           Enable this to support the USB PHY on Marvell Berlin SoCs.
  24
  25 config PHY_BERLIN_SATA
  26         tristate "Marvell Berlin SATA PHY driver"
  27         depends on ARCH_BERLIN && HAS_IOMEM && OF
  28         select GENERIC_PHY
  29         help
  30           Enable this to support the SATA PHY on Marvell Berlin SoCs.
  31
  32 config ARMADA375_USBCLUSTER_PHY
  33         def_bool y
  34         depends on MACH_ARMADA_375 || COMPILE_TEST
  35         depends on OF
  36         select GENERIC_PHY
  37
  38 config PHY_DM816X_USB
  39         tristate "TI dm816x USB PHY driver"
  40         depends on ARCH_OMAP2PLUS
  41         depends on USB_SUPPORT
  42         select GENERIC_PHY
  43         select USB_PHY
  44         help
  45           Enable this for dm816x USB to work.
  46
  47 config PHY_EXYNOS_MIPI_VIDEO
  48         tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
  49         depends on HAS_IOMEM
  50         depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
  51         select GENERIC_PHY
  52         default y if ARCH_S5PV210 || ARCH_EXYNOS
  53         help
  54           Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
  55           and EXYNOS SoCs.
  56
  57 config PHY_LPC18XX_USB_OTG
  58         tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
  59         depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
  60         depends on MFD_SYSCON
  61         select GENERIC_PHY
  62         help
  63           Enable this to support NXP LPC18xx/43xx internal USB OTG PHY.
  64
  65           This driver is need for USB0 support on LPC18xx/43xx and takes
  66           care of enabling and clock setup.
  67
  68 config PHY_PXA_28NM_HSIC
  69         tristate "Marvell USB HSIC 28nm PHY Driver"
  70         depends on HAS_IOMEM
  71         select GENERIC_PHY
  72         help
  73           Enable this to support Marvell USB HSIC PHY driver for Marvell
  74           SoC. This driver will do the PHY initialization and shutdown.
  75           The PHY driver will be used by Marvell ehci driver.
  76
  77           To compile this driver as a module, choose M here.
  78
  79 config PHY_PXA_28NM_USB2
  80         tristate "Marvell USB 2.0 28nm PHY Driver"
  81         depends on HAS_IOMEM
  82         select GENERIC_PHY
  83         help
  84           Enable this to support Marvell USB 2.0 PHY driver for Marvell
  85           SoC. This driver will do the PHY initialization and shutdown.
  86           The PHY driver will be used by Marvell udc/ehci/otg driver.
  87
  88           To compile this driver as a module, choose M here.
  89
  90 config PHY_MVEBU_SATA
  91         def_bool y
  92         depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
  93         depends on OF
  94         select GENERIC_PHY
  95
  96 config PHY_MIPHY28LP
  97         tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407"
  98         depends on ARCH_STI
  99         select GENERIC_PHY
 100         help
 101           Enable this to support the miphy transceiver (for SATA/PCIE/USB3)
 102           that is part of STMicroelectronics STiH407 SoC.
 103
 104 config PHY_MIPHY365X
 105         tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series"
 106         depends on ARCH_STI
 107         depends on HAS_IOMEM
 108         depends on OF
 109         select GENERIC_PHY
 110         help
 111           Enable this to support the miphy transceiver (for SATA/PCIE)
 112           that is part of STMicroelectronics STiH41x SoC series.
 113
 114 config PHY_RCAR_GEN2
 115         tristate "Renesas R-Car generation 2 USB PHY driver"
 116         depends on ARCH_SHMOBILE
 117         depends on GENERIC_PHY
 118         help
 119           Support for USB PHY found on Renesas R-Car generation 2 SoCs.
 120
 121 config OMAP_CONTROL_PHY
 122         tristate "OMAP CONTROL PHY Driver"
 123         depends on ARCH_OMAP2PLUS || COMPILE_TEST
 124         help
 125           Enable this to add support for the PHY part present in the control
 126           module. This driver has API to power on the USB2 PHY and to write to
 127           the mailbox. The mailbox is present only in omap4 and the register to
 128           power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
 129           additional register to power on USB3 PHY/SATA PHY/PCIE PHY
 130           (PIPE3 PHY).
 131
 132 config OMAP_USB2
 133         tristate "OMAP USB2 PHY Driver"
 134         depends on ARCH_OMAP2PLUS
 135         depends on USB_SUPPORT
 136         select GENERIC_PHY
 137         select USB_PHY
 138         select OMAP_CONTROL_PHY
 139         depends on OMAP_OCP2SCP
 140         help
 141           Enable this to support the transceiver that is part of SOC. This
 142           driver takes care of all the PHY functionality apart from comparator.
 143           The USB OTG controller communicates with the comparator using this
 144           driver.
 145
 146 config TI_PIPE3
 147         tristate "TI PIPE3 PHY Driver"
 148         depends on ARCH_OMAP2PLUS || COMPILE_TEST
 149         select GENERIC_PHY
 150         select OMAP_CONTROL_PHY
 151         depends on OMAP_OCP2SCP
 152         help
 153           Enable this to support the PIPE3 PHY that is part of TI SOCs. This
 154           driver takes care of all the PHY functionality apart from comparator.
 155           This driver interacts with the "OMAP Control PHY Driver" to power
 156           on/off the PHY.
 157
 158 config TWL4030_USB
 159         tristate "TWL4030 USB Transceiver Driver"
 160         depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
 161         depends on USB_SUPPORT
 162         select GENERIC_PHY
 163         select USB_PHY
 164         help
 165           Enable this to support the USB OTG transceiver on TWL4030
 166           family chips (including the TWL5030 and TPS659x0 devices).
 167           This transceiver supports high and full speed devices plus,
 168           in host mode, low speed.
 169
 170 config PHY_EXYNOS_DP_VIDEO
 171         tristate "EXYNOS SoC series Display Port PHY driver"
 172         depends on OF
 173         depends on ARCH_EXYNOS || COMPILE_TEST
 174         default ARCH_EXYNOS
 175         select GENERIC_PHY
 176         help
 177           Support for Display Port PHY found on Samsung EXYNOS SoCs.
 178
 179 config BCM_KONA_USB2_PHY
 180         tristate "Broadcom Kona USB2 PHY Driver"
 181         depends on HAS_IOMEM
 182         select GENERIC_PHY
 183         help
 184           Enable this to support the Broadcom Kona USB 2.0 PHY.
 185
 186 config PHY_EXYNOS5250_SATA
 187         tristate "Exynos5250 Sata SerDes/PHY driver"
 188         depends on SOC_EXYNOS5250
 189         depends on HAS_IOMEM
 190         depends on OF
 191         select GENERIC_PHY
 192         select I2C
 193         select I2C_S3C2410
 194         select MFD_SYSCON
 195         help
 196           Enable this to support SATA SerDes/Phy found on Samsung's
 197           Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
 198           SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
 199           port to accept one SATA device.
 200
 201 config PHY_HIX5HD2_SATA
 202         tristate "HIX5HD2 SATA PHY Driver"
 203         depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
 204         select GENERIC_PHY
 205         select MFD_SYSCON
 206         help
 207           Support for SATA PHY on Hisilicon hix5hd2 Soc.
 208
 209 config PHY_MT65XX_USB3
 210         tristate "Mediatek USB3.0 PHY Driver"
 211         depends on ARCH_MEDIATEK && OF
 212         select GENERIC_PHY
 213         help
 214           Say 'Y' here to add support for Mediatek USB3.0 PHY driver
 215           for mt65xx SoCs. it supports two usb2.0 ports and
 216           one usb3.0 port.
 217
 218 config PHY_SUN4I_USB
 219         tristate "Allwinner sunxi SoC USB PHY driver"
 220         depends on ARCH_SUNXI && HAS_IOMEM && OF
 221         depends on RESET_CONTROLLER
 222         depends on EXTCON
 223         depends on POWER_SUPPLY
 224         select GENERIC_PHY
 225         help
 226           Enable this to support the transceiver that is part of Allwinner
 227           sunxi SoCs.
 228
 229           This driver controls the entire USB PHY block, both the USB OTG
 230           parts, as well as the 2 regular USB 2 host PHYs.
 231
 232 config PHY_SUN9I_USB
 233         tristate "Allwinner sun9i SoC USB PHY driver"
 234         depends on ARCH_SUNXI && HAS_IOMEM && OF
 235         depends on RESET_CONTROLLER
 236         select GENERIC_PHY
 237         help
 238           Enable this to support the transceiver that is part of Allwinner
 239           sun9i SoCs.
 240
 241           This driver controls each individual USB 2 host PHY.
 242
 243 config PHY_SAMSUNG_USB2
 244         tristate "Samsung USB 2.0 PHY driver"
 245         depends on HAS_IOMEM
 246         depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
 247         select GENERIC_PHY
 248         select MFD_SYSCON
 249         default ARCH_EXYNOS
 250         help
 251           Enable this to support the Samsung USB 2.0 PHY driver for Samsung
 252           SoCs. This driver provides the interface for USB 2.0 PHY. Support
 253           for particular PHYs will be enabled based on the SoC type in addition
 254           to this driver.
 255
 256 config PHY_S5PV210_USB2
 257         bool "Support for S5PV210"
 258         depends on PHY_SAMSUNG_USB2
 259         depends on ARCH_S5PV210
 260         help
 261           Enable USB PHY support for S5PV210. This option requires that Samsung
 262           USB 2.0 PHY driver is enabled and means that support for this
 263           particular SoC is compiled in the driver. In case of S5PV210 two phys
 264           are available - device and host.
 265
 266 config PHY_EXYNOS4210_USB2
 267         bool
 268         depends on PHY_SAMSUNG_USB2
 269         default CPU_EXYNOS4210
 270
 271 config PHY_EXYNOS4X12_USB2
 272         bool
 273         depends on PHY_SAMSUNG_USB2
 274         default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
 275
 276 config PHY_EXYNOS5250_USB2
 277         bool
 278         depends on PHY_SAMSUNG_USB2
 279         default SOC_EXYNOS5250 || SOC_EXYNOS5420
 280
 281 config PHY_EXYNOS5_USBDRD
 282         tristate "Exynos5 SoC series USB DRD PHY driver"
 283         depends on ARCH_EXYNOS && OF
 284         depends on HAS_IOMEM
 285         depends on USB_DWC3_EXYNOS
 286         select GENERIC_PHY
 287         select MFD_SYSCON
 288         default y
 289         help
 290           Enable USB DRD PHY support for Exynos 5 SoC series.
 291           This driver provides PHY interface for USB 3.0 DRD controller
 292           present on Exynos5 SoC series.
 293
 294 config PHY_PISTACHIO_USB
 295         tristate "IMG Pistachio USB2.0 PHY driver"
 296         depends on MACH_PISTACHIO
 297         select GENERIC_PHY
 298         help
 299           Enable this to support the USB2.0 PHY on the IMG Pistachio SoC.
 300
 301 config PHY_QCOM_APQ8064_SATA
 302         tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
 303         depends on ARCH_QCOM
 304         depends on HAS_IOMEM
 305         depends on OF
 306         select GENERIC_PHY
 307
 308 config PHY_QCOM_IPQ806X_SATA
 309         tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
 310         depends on ARCH_QCOM
 311         depends on HAS_IOMEM
 312         depends on OF
 313         select GENERIC_PHY
 314
 315 config PHY_ROCKCHIP_USB
 316         tristate "Rockchip USB2 PHY Driver"
 317         depends on ARCH_ROCKCHIP && OF
 318         select GENERIC_PHY
 319         help
 320           Enable this to support the Rockchip USB 2.0 PHY.
 321
 322 config PHY_ST_SPEAR1310_MIPHY
 323         tristate "ST SPEAR1310-MIPHY driver"
 324         select GENERIC_PHY
 325         depends on MACH_SPEAR1310 || COMPILE_TEST
 326         help
 327           Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
 328
 329 config PHY_ST_SPEAR1340_MIPHY
 330         tristate "ST SPEAR1340-MIPHY driver"
 331         select GENERIC_PHY
 332         depends on MACH_SPEAR1340 || COMPILE_TEST
 333         help
 334           Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
 335
 336 config PHY_XGENE
 337         tristate "APM X-Gene 15Gbps PHY support"
 338         depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST)
 339         select GENERIC_PHY
 340         help
 341           This option enables support for APM X-Gene SoC multi-purpose PHY.
 342
 343 config PHY_STIH407_USB
 344         tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
 345         depends on RESET_CONTROLLER
 346         depends on ARCH_STI || COMPILE_TEST
 347         select GENERIC_PHY
 348         help
 349           Enable this support to enable the picoPHY device used by USB2
 350           and USB3 controllers on STMicroelectronics STiH407 SoC families.
 351
 352 config PHY_STIH41X_USB
 353         tristate "STMicroelectronics USB2 PHY driver for STiH41x series"
 354         depends on ARCH_STI
 355         select GENERIC_PHY
 356         help
 357           Enable this to support the USB transceiver that is part of
 358           STMicroelectronics STiH41x SoC series.
 359
 360 config PHY_QCOM_UFS
 361         tristate "Qualcomm UFS PHY driver"
 362         depends on OF && ARCH_QCOM
 363         select GENERIC_PHY
 364         help
 365           Support for UFS PHY on QCOM chipsets.
 366
 367 config PHY_TUSB1210
 368         tristate "TI TUSB1210 ULPI PHY module"
 369         depends on USB_ULPI_BUS
 370         select GENERIC_PHY
 371         help
 372           Support for TI TUSB1210 USB ULPI PHY.
 373
 374 config PHY_BRCMSTB_SATA
 375         tristate "Broadcom STB SATA PHY driver"
 376         depends on ARCH_BRCMSTB
 377         depends on OF
 378         select GENERIC_PHY
 379         help
 380           Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs.
 381           Likely useful only with CONFIG_SATA_BRCMSTB enabled.
 382
 383 config PHY_CYGNUS_PCIE
 384         tristate "Broadcom Cygnus PCIe PHY driver"
 385         depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
 386         select GENERIC_PHY
 387         default ARCH_BCM_CYGNUS
 388         help
 389           Enable this to support the Broadcom Cygnus PCIe PHY.
 390           If unsure, say N.
 391
 392 endmenu