drivers/phy/Kconfig

   1 #
   2 # PHY
   3 #
   4
   5 menu "PHY Subsystem"
   6
   7 config GENERIC_PHY
   8         bool "PHY Core"
   9         help
  10           Generic PHY support.
  11
  12           This framework is designed to provide a generic interface for PHY
  13           devices present in the kernel. This layer will have the generic
  14           API by which phy drivers can create PHY using the phy framework and
  15           phy users can obtain reference to the PHY. All the users of this
  16           framework should select this config.
  17
  18 config PHY_BERLIN_USB
  19         tristate "Marvell Berlin USB PHY Driver"
  20         depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
  21         select GENERIC_PHY
  22         help
  23           Enable this to support the USB PHY on Marvell Berlin SoCs.
  24
  25 config PHY_BERLIN_SATA
  26         tristate "Marvell Berlin SATA PHY driver"
  27         depends on ARCH_BERLIN && HAS_IOMEM && OF
  28         select GENERIC_PHY
  29         help
  30           Enable this to support the SATA PHY on Marvell Berlin SoCs.
  31
  32 config ARMADA375_USBCLUSTER_PHY
  33         def_bool y
  34         depends on MACH_ARMADA_375 || COMPILE_TEST
  35         depends on OF
  36         select GENERIC_PHY
  37
  38 config PHY_DM816X_USB
  39         tristate "TI dm816x USB PHY driver"
  40         depends on ARCH_OMAP2PLUS
  41         select GENERIC_PHY
  42         help
  43           Enable this for dm816x USB to work.
  44
  45 config PHY_EXYNOS_MIPI_VIDEO
  46         tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
  47         depends on HAS_IOMEM
  48         depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
  49         select GENERIC_PHY
  50         default y if ARCH_S5PV210 || ARCH_EXYNOS
  51         help
  52           Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
  53           and EXYNOS SoCs.
  54
  55 config PHY_MVEBU_SATA
  56         def_bool y
  57         depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
  58         depends on OF
  59         select GENERIC_PHY
  60
  61 config PHY_MIPHY28LP
  62         tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407"
  63         depends on ARCH_STI
  64         select GENERIC_PHY
  65         help
  66           Enable this to support the miphy transceiver (for SATA/PCIE/USB3)
  67           that is part of STMicroelectronics STiH407 SoC.
  68
  69 config PHY_MIPHY365X
  70         tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series"
  71         depends on ARCH_STI
  72         depends on HAS_IOMEM
  73         depends on OF
  74         select GENERIC_PHY
  75         help
  76           Enable this to support the miphy transceiver (for SATA/PCIE)
  77           that is part of STMicroelectronics STiH41x SoC series.
  78
  79 config PHY_RCAR_GEN2
  80         tristate "Renesas R-Car generation 2 USB PHY driver"
  81         depends on ARCH_SHMOBILE
  82         depends on GENERIC_PHY
  83         help
  84           Support for USB PHY found on Renesas R-Car generation 2 SoCs.
  85
  86 config OMAP_CONTROL_PHY
  87         tristate "OMAP CONTROL PHY Driver"
  88         depends on ARCH_OMAP2PLUS || COMPILE_TEST
  89         help
  90           Enable this to add support for the PHY part present in the control
  91           module. This driver has API to power on the USB2 PHY and to write to
  92           the mailbox. The mailbox is present only in omap4 and the register to
  93           power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
  94           additional register to power on USB3 PHY/SATA PHY/PCIE PHY
  95           (PIPE3 PHY).
  96
  97 config OMAP_USB2
  98         tristate "OMAP USB2 PHY Driver"
  99         depends on ARCH_OMAP2PLUS
 100         depends on USB_PHY
 101         select GENERIC_PHY
 102         select OMAP_CONTROL_PHY
 103         depends on OMAP_OCP2SCP
 104         help
 105           Enable this to support the transceiver that is part of SOC. This
 106           driver takes care of all the PHY functionality apart from comparator.
 107           The USB OTG controller communicates with the comparator using this
 108           driver.
 109
 110 config TI_PIPE3
 111         tristate "TI PIPE3 PHY Driver"
 112         depends on ARCH_OMAP2PLUS || COMPILE_TEST
 113         select GENERIC_PHY
 114         select OMAP_CONTROL_PHY
 115         depends on OMAP_OCP2SCP
 116         help
 117           Enable this to support the PIPE3 PHY that is part of TI SOCs. This
 118           driver takes care of all the PHY functionality apart from comparator.
 119           This driver interacts with the "OMAP Control PHY Driver" to power
 120           on/off the PHY.
 121
 122 config TWL4030_USB
 123         tristate "TWL4030 USB Transceiver Driver"
 124         depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
 125         depends on USB_PHY
 126         select GENERIC_PHY
 127         help
 128           Enable this to support the USB OTG transceiver on TWL4030
 129           family chips (including the TWL5030 and TPS659x0 devices).
 130           This transceiver supports high and full speed devices plus,
 131           in host mode, low speed.
 132
 133 config PHY_EXYNOS_DP_VIDEO
 134         tristate "EXYNOS SoC series Display Port PHY driver"
 135         depends on OF
 136         depends on ARCH_EXYNOS || COMPILE_TEST
 137         default ARCH_EXYNOS
 138         select GENERIC_PHY
 139         help
 140           Support for Display Port PHY found on Samsung EXYNOS SoCs.
 141
 142 config BCM_KONA_USB2_PHY
 143         tristate "Broadcom Kona USB2 PHY Driver"
 144         depends on HAS_IOMEM
 145         select GENERIC_PHY
 146         help
 147           Enable this to support the Broadcom Kona USB 2.0 PHY.
 148
 149 config PHY_EXYNOS5250_SATA
 150         tristate "Exynos5250 Sata SerDes/PHY driver"
 151         depends on SOC_EXYNOS5250
 152         depends on HAS_IOMEM
 153         depends on OF
 154         select GENERIC_PHY
 155         select I2C
 156         select I2C_S3C2410
 157         select MFD_SYSCON
 158         help
 159           Enable this to support SATA SerDes/Phy found on Samsung's
 160           Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
 161           SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
 162           port to accept one SATA device.
 163
 164 config PHY_HIX5HD2_SATA
 165         tristate "HIX5HD2 SATA PHY Driver"
 166         depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
 167         select GENERIC_PHY
 168         select MFD_SYSCON
 169         help
 170           Support for SATA PHY on Hisilicon hix5hd2 Soc.
 171
 172 config PHY_SUN4I_USB
 173         tristate "Allwinner sunxi SoC USB PHY driver"
 174         depends on ARCH_SUNXI && HAS_IOMEM && OF
 175         depends on RESET_CONTROLLER
 176         select GENERIC_PHY
 177         help
 178           Enable this to support the transceiver that is part of Allwinner
 179           sunxi SoCs.
 180
 181           This driver controls the entire USB PHY block, both the USB OTG
 182           parts, as well as the 2 regular USB 2 host PHYs.
 183
 184 config PHY_SUN9I_USB
 185         tristate "Allwinner sun9i SoC USB PHY driver"
 186         depends on ARCH_SUNXI && HAS_IOMEM && OF
 187         depends on RESET_CONTROLLER
 188         select GENERIC_PHY
 189         help
 190           Enable this to support the transceiver that is part of Allwinner
 191           sun9i SoCs.
 192
 193           This driver controls each individual USB 2 host PHY.
 194
 195 config PHY_SAMSUNG_USB2
 196         tristate "Samsung USB 2.0 PHY driver"
 197         depends on HAS_IOMEM
 198         depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
 199         select GENERIC_PHY
 200         select MFD_SYSCON
 201         default ARCH_EXYNOS
 202         help
 203           Enable this to support the Samsung USB 2.0 PHY driver for Samsung
 204           SoCs. This driver provides the interface for USB 2.0 PHY. Support
 205           for particular PHYs will be enabled based on the SoC type in addition
 206           to this driver.
 207
 208 config PHY_S5PV210_USB2
 209         bool "Support for S5PV210"
 210         depends on PHY_SAMSUNG_USB2
 211         depends on ARCH_S5PV210
 212         help
 213           Enable USB PHY support for S5PV210. This option requires that Samsung
 214           USB 2.0 PHY driver is enabled and means that support for this
 215           particular SoC is compiled in the driver. In case of S5PV210 two phys
 216           are available - device and host.
 217
 218 config PHY_EXYNOS4210_USB2
 219         bool
 220         depends on PHY_SAMSUNG_USB2
 221         default CPU_EXYNOS4210
 222
 223 config PHY_EXYNOS4X12_USB2
 224         bool
 225         depends on PHY_SAMSUNG_USB2
 226         default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
 227
 228 config PHY_EXYNOS5250_USB2
 229         bool
 230         depends on PHY_SAMSUNG_USB2
 231         default SOC_EXYNOS5250 || SOC_EXYNOS5420
 232
 233 config PHY_EXYNOS5_USBDRD
 234         tristate "Exynos5 SoC series USB DRD PHY driver"
 235         depends on ARCH_EXYNOS && OF
 236         depends on HAS_IOMEM
 237         depends on USB_DWC3_EXYNOS
 238         select GENERIC_PHY
 239         select MFD_SYSCON
 240         default y
 241         help
 242           Enable USB DRD PHY support for Exynos 5 SoC series.
 243           This driver provides PHY interface for USB 3.0 DRD controller
 244           present on Exynos5 SoC series.
 245
 246 config PHY_QCOM_APQ8064_SATA
 247         tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
 248         depends on ARCH_QCOM
 249         depends on HAS_IOMEM
 250         depends on OF
 251         select GENERIC_PHY
 252
 253 config PHY_QCOM_IPQ806X_SATA
 254         tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
 255         depends on ARCH_QCOM
 256         depends on HAS_IOMEM
 257         depends on OF
 258         select GENERIC_PHY
 259
 260 config PHY_ROCKCHIP_USB
 261         tristate "Rockchip USB2 PHY Driver"
 262         depends on ARCH_ROCKCHIP && OF
 263         select GENERIC_PHY
 264         help
 265           Enable this to support the Rockchip USB 2.0 PHY.
 266
 267 config PHY_ST_SPEAR1310_MIPHY
 268         tristate "ST SPEAR1310-MIPHY driver"
 269         select GENERIC_PHY
 270         depends on MACH_SPEAR1310 || COMPILE_TEST
 271         help
 272           Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
 273
 274 config PHY_ST_SPEAR1340_MIPHY
 275         tristate "ST SPEAR1340-MIPHY driver"
 276         select GENERIC_PHY
 277         depends on MACH_SPEAR1340 || COMPILE_TEST
 278         help
 279           Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
 280
 281 config PHY_XGENE
 282         tristate "APM X-Gene 15Gbps PHY support"
 283         depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST)
 284         select GENERIC_PHY
 285         help
 286           This option enables support for APM X-Gene SoC multi-purpose PHY.
 287
 288 config PHY_STIH407_USB
 289         tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
 290         depends on RESET_CONTROLLER
 291         depends on ARCH_STI || COMPILE_TEST
 292         select GENERIC_PHY
 293         help
 294           Enable this support to enable the picoPHY device used by USB2
 295           and USB3 controllers on STMicroelectronics STiH407 SoC families.
 296
 297 config PHY_STIH41X_USB
 298         tristate "STMicroelectronics USB2 PHY driver for STiH41x series"
 299         depends on ARCH_STI
 300         select GENERIC_PHY
 301         help
 302           Enable this to support the USB transceiver that is part of
 303           STMicroelectronics STiH41x SoC series.
 304
 305 config PHY_QCOM_UFS
 306         tristate "Qualcomm UFS PHY driver"
 307         depends on OF && ARCH_MSM
 308         select GENERIC_PHY
 309         help
 310           Support for UFS PHY on QCOM chipsets.
 311
 312 endmenu