drivers/phy/Kconfig

   1 #
   2 # PHY
   3 #
   4
   5 menu "PHY Subsystem"
   6
   7 config GENERIC_PHY
   8         bool "PHY Core"
   9         help
  10           Generic PHY support.
  11
  12           This framework is designed to provide a generic interface for PHY
  13           devices present in the kernel. This layer will have the generic
  14           API by which phy drivers can create PHY using the phy framework and
  15           phy users can obtain reference to the PHY. All the users of this
  16           framework should select this config.
  17
  18 config PHY_EXYNOS_MIPI_VIDEO
  19         tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
  20         depends on HAS_IOMEM
  21         depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
  22         select GENERIC_PHY
  23         default y if ARCH_S5PV210 || ARCH_EXYNOS
  24         help
  25           Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
  26           and EXYNOS SoCs.
  27
  28 config PHY_MVEBU_SATA
  29         def_bool y
  30         depends on ARCH_KIRKWOOD || ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
  31         depends on OF
  32         select GENERIC_PHY
  33
  34 config OMAP_CONTROL_PHY
  35         tristate "OMAP CONTROL PHY Driver"
  36         depends on ARCH_OMAP2PLUS || COMPILE_TEST
  37         help
  38           Enable this to add support for the PHY part present in the control
  39           module. This driver has API to power on the USB2 PHY and to write to
  40           the mailbox. The mailbox is present only in omap4 and the register to
  41           power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
  42           additional register to power on USB3 PHY/SATA PHY/PCIE PHY
  43           (PIPE3 PHY).
  44
  45 config OMAP_USB2
  46         tristate "OMAP USB2 PHY Driver"
  47         depends on ARCH_OMAP2PLUS
  48         depends on USB_PHY
  49         select GENERIC_PHY
  50         select OMAP_CONTROL_PHY
  51         depends on OMAP_OCP2SCP
  52         help
  53           Enable this to support the transceiver that is part of SOC. This
  54           driver takes care of all the PHY functionality apart from comparator.
  55           The USB OTG controller communicates with the comparator using this
  56           driver.
  57
  58 config TI_PIPE3
  59         tristate "TI PIPE3 PHY Driver"
  60         depends on ARCH_OMAP2PLUS || COMPILE_TEST
  61         select GENERIC_PHY
  62         select OMAP_CONTROL_PHY
  63         depends on OMAP_OCP2SCP
  64         help
  65           Enable this to support the PIPE3 PHY that is part of TI SOCs. This
  66           driver takes care of all the PHY functionality apart from comparator.
  67           This driver interacts with the "OMAP Control PHY Driver" to power
  68           on/off the PHY.
  69
  70 config TWL4030_USB
  71         tristate "TWL4030 USB Transceiver Driver"
  72         depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
  73         depends on USB_PHY
  74         select GENERIC_PHY
  75         help
  76           Enable this to support the USB OTG transceiver on TWL4030
  77           family chips (including the TWL5030 and TPS659x0 devices).
  78           This transceiver supports high and full speed devices plus,
  79           in host mode, low speed.
  80
  81 config PHY_EXYNOS_DP_VIDEO
  82         tristate "EXYNOS SoC series Display Port PHY driver"
  83         depends on OF
  84         depends on ARCH_EXYNOS || COMPILE_TEST
  85         default ARCH_EXYNOS
  86         select GENERIC_PHY
  87         help
  88           Support for Display Port PHY found on Samsung EXYNOS SoCs.
  89
  90 config BCM_KONA_USB2_PHY
  91         tristate "Broadcom Kona USB2 PHY Driver"
  92         depends on HAS_IOMEM
  93         select GENERIC_PHY
  94         help
  95           Enable this to support the Broadcom Kona USB 2.0 PHY.
  96
  97 config PHY_EXYNOS5250_SATA
  98         tristate "Exynos5250 Sata SerDes/PHY driver"
  99         depends on SOC_EXYNOS5250
 100         depends on HAS_IOMEM
 101         depends on OF
 102         select GENERIC_PHY
 103         select I2C
 104         select I2C_S3C2410
 105         select MFD_SYSCON
 106         help
 107           Enable this to support SATA SerDes/Phy found on Samsung's
 108           Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
 109           SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
 110           port to accept one SATA device.
 111
 112 config PHY_SUN4I_USB
 113         tristate "Allwinner sunxi SoC USB PHY driver"
 114         depends on ARCH_SUNXI && HAS_IOMEM && OF
 115         depends on RESET_CONTROLLER
 116         select GENERIC_PHY
 117         help
 118           Enable this to support the transceiver that is part of Allwinner
 119           sunxi SoCs.
 120
 121           This driver controls the entire USB PHY block, both the USB OTG
 122           parts, as well as the 2 regular USB 2 host PHYs.
 123
 124 config PHY_SAMSUNG_USB2
 125         tristate "Samsung USB 2.0 PHY driver"
 126         depends on HAS_IOMEM
 127         select GENERIC_PHY
 128         select MFD_SYSCON
 129         help
 130           Enable this to support the Samsung USB 2.0 PHY driver for Samsung
 131           SoCs. This driver provides the interface for USB 2.0 PHY. Support for
 132           particular SoCs has to be enabled in addition to this driver. Number
 133           and type of supported phys depends on the SoC.
 134
 135 config PHY_S5PV210_USB2
 136         bool "Support for S5PV210"
 137         depends on PHY_SAMSUNG_USB2
 138         depends on ARCH_S5PV210
 139         help
 140           Enable USB PHY support for S5PV210. This option requires that Samsung
 141           USB 2.0 PHY driver is enabled and means that support for this
 142           particular SoC is compiled in the driver. In case of S5PV210 two phys
 143           are available - device and host.
 144
 145 config PHY_EXYNOS4210_USB2
 146         bool "Support for Exynos 4210"
 147         depends on PHY_SAMSUNG_USB2
 148         depends on CPU_EXYNOS4210
 149         help
 150           Enable USB PHY support for Exynos 4210. This option requires that
 151           Samsung USB 2.0 PHY driver is enabled and means that support for this
 152           particular SoC is compiled in the driver. In case of Exynos 4210 four
 153           phys are available - device, host, HSIC0 and HSIC1.
 154
 155 config PHY_EXYNOS4X12_USB2
 156         bool "Support for Exynos 4x12"
 157         depends on PHY_SAMSUNG_USB2
 158         depends on (SOC_EXYNOS4212 || SOC_EXYNOS4412)
 159         help
 160           Enable USB PHY support for Exynos 4x12. This option requires that
 161           Samsung USB 2.0 PHY driver is enabled and means that support for this
 162           particular SoC is compiled in the driver. In case of Exynos 4x12 four
 163           phys are available - device, host, HSIC0 and HSIC1.
 164
 165 config PHY_EXYNOS5250_USB2
 166         bool "Support for Exynos 5250"
 167         depends on PHY_SAMSUNG_USB2
 168         depends on SOC_EXYNOS5250
 169         help
 170           Enable USB PHY support for Exynos 5250. This option requires that
 171           Samsung USB 2.0 PHY driver is enabled and means that support for this
 172           particular SoC is compiled in the driver. In case of Exynos 5250 four
 173           phys are available - device, host, HSIC0 and HSIC.
 174
 175 config PHY_EXYNOS5_USBDRD
 176         tristate "Exynos5 SoC series USB DRD PHY driver"
 177         depends on ARCH_EXYNOS5 && OF
 178         depends on HAS_IOMEM
 179         select GENERIC_PHY
 180         select MFD_SYSCON
 181         help
 182           Enable USB DRD PHY support for Exynos 5 SoC series.
 183           This driver provides PHY interface for USB 3.0 DRD controller
 184           present on Exynos5 SoC series.
 185
 186 config PHY_XGENE
 187         tristate "APM X-Gene 15Gbps PHY support"
 188         depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST)
 189         select GENERIC_PHY
 190         help
 191           This option enables support for APM X-Gene SoC multi-purpose PHY.
 192
 193 endmenu