drivers/phy/Kconfig

   1 #
   2 # PHY
   3 #
   4
   5 menu "PHY Subsystem"
   6
   7 config GENERIC_PHY
   8         bool "PHY Core"
   9         help
  10           Generic PHY support.
  11
  12           This framework is designed to provide a generic interface for PHY
  13           devices present in the kernel. This layer will have the generic
  14           API by which phy drivers can create PHY using the phy framework and
  15           phy users can obtain reference to the PHY. All the users of this
  16           framework should select this config.
  17
  18 config PHY_EXYNOS_MIPI_VIDEO
  19         tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
  20         depends on HAS_IOMEM
  21         depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
  22         select GENERIC_PHY
  23         default y if ARCH_S5PV210 || ARCH_EXYNOS
  24         help
  25           Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
  26           and EXYNOS SoCs.
  27
  28 config PHY_MVEBU_SATA
  29         def_bool y
  30         depends on ARCH_KIRKWOOD || ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
  31         depends on OF
  32         select GENERIC_PHY
  33
  34 config OMAP_CONTROL_PHY
  35         tristate "OMAP CONTROL PHY Driver"
  36         depends on ARCH_OMAP2PLUS || COMPILE_TEST
  37         help
  38           Enable this to add support for the PHY part present in the control
  39           module. This driver has API to power on the USB2 PHY and to write to
  40           the mailbox. The mailbox is present only in omap4 and the register to
  41           power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
  42           additional register to power on USB3 PHY/SATA PHY/PCIE PHY
  43           (PIPE3 PHY).
  44
  45 config OMAP_USB2
  46         tristate "OMAP USB2 PHY Driver"
  47         depends on ARCH_OMAP2PLUS
  48         depends on USB_PHY
  49         select GENERIC_PHY
  50         select OMAP_CONTROL_PHY
  51         depends on OMAP_OCP2SCP
  52         help
  53           Enable this to support the transceiver that is part of SOC. This
  54           driver takes care of all the PHY functionality apart from comparator.
  55           The USB OTG controller communicates with the comparator using this
  56           driver.
  57
  58 config TI_PIPE3
  59         tristate "TI PIPE3 PHY Driver"
  60         depends on ARCH_OMAP2PLUS || COMPILE_TEST
  61         select GENERIC_PHY
  62         select OMAP_CONTROL_PHY
  63         depends on OMAP_OCP2SCP
  64         help
  65           Enable this to support the PIPE3 PHY that is part of TI SOCs. This
  66           driver takes care of all the PHY functionality apart from comparator.
  67           This driver interacts with the "OMAP Control PHY Driver" to power
  68           on/off the PHY.
  69
  70 config TWL4030_USB
  71         tristate "TWL4030 USB Transceiver Driver"
  72         depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
  73         depends on USB_PHY
  74         select GENERIC_PHY
  75         help
  76           Enable this to support the USB OTG transceiver on TWL4030
  77           family chips (including the TWL5030 and TPS659x0 devices).
  78           This transceiver supports high and full speed devices plus,
  79           in host mode, low speed.
  80
  81 config PHY_EXYNOS_DP_VIDEO
  82         tristate "EXYNOS SoC series Display Port PHY driver"
  83         depends on OF
  84         depends on ARCH_EXYNOS || COMPILE_TEST
  85         default ARCH_EXYNOS
  86         select GENERIC_PHY
  87         help
  88           Support for Display Port PHY found on Samsung EXYNOS SoCs.
  89
  90 config BCM_KONA_USB2_PHY
  91         tristate "Broadcom Kona USB2 PHY Driver"
  92         depends on HAS_IOMEM
  93         select GENERIC_PHY
  94         help
  95           Enable this to support the Broadcom Kona USB 2.0 PHY.
  96
  97 config PHY_EXYNOS5250_SATA
  98         tristate "Exynos5250 Sata SerDes/PHY driver"
  99         depends on SOC_EXYNOS5250
 100         depends on HAS_IOMEM
 101         depends on OF
 102         select GENERIC_PHY
 103         select I2C
 104         select I2C_S3C2410
 105         select MFD_SYSCON
 106         help
 107           Enable this to support SATA SerDes/Phy found on Samsung's
 108           Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
 109           SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
 110           port to accept one SATA device.
 111
 112 config PHY_SUN4I_USB
 113         tristate "Allwinner sunxi SoC USB PHY driver"
 114         depends on ARCH_SUNXI && HAS_IOMEM && OF
 115         select GENERIC_PHY
 116         help
 117           Enable this to support the transceiver that is part of Allwinner
 118           sunxi SoCs.
 119
 120           This driver controls the entire USB PHY block, both the USB OTG
 121           parts, as well as the 2 regular USB 2 host PHYs.
 122
 123 config PHY_SAMSUNG_USB2
 124         tristate "Samsung USB 2.0 PHY driver"
 125         depends on HAS_IOMEM
 126         select GENERIC_PHY
 127         select MFD_SYSCON
 128         help
 129           Enable this to support the Samsung USB 2.0 PHY driver for Samsung
 130           SoCs. This driver provides the interface for USB 2.0 PHY. Support for
 131           particular SoCs has to be enabled in addition to this driver. Number
 132           and type of supported phys depends on the SoC.
 133
 134 config PHY_EXYNOS4210_USB2
 135         bool "Support for Exynos 4210"
 136         depends on PHY_SAMSUNG_USB2
 137         depends on CPU_EXYNOS4210
 138         help
 139           Enable USB PHY support for Exynos 4210. This option requires that
 140           Samsung USB 2.0 PHY driver is enabled and means that support for this
 141           particular SoC is compiled in the driver. In case of Exynos 4210 four
 142           phys are available - device, host, HSIC0 and HSIC1.
 143
 144 config PHY_EXYNOS4X12_USB2
 145         bool "Support for Exynos 4x12"
 146         depends on PHY_SAMSUNG_USB2
 147         depends on (SOC_EXYNOS4212 || SOC_EXYNOS4412)
 148         help
 149           Enable USB PHY support for Exynos 4x12. This option requires that
 150           Samsung USB 2.0 PHY driver is enabled and means that support for this
 151           particular SoC is compiled in the driver. In case of Exynos 4x12 four
 152           phys are available - device, host, HSIC0 and HSIC1.
 153
 154 config PHY_EXYNOS5250_USB2
 155         bool "Support for Exynos 5250"
 156         depends on PHY_SAMSUNG_USB2
 157         depends on SOC_EXYNOS5250
 158         help
 159           Enable USB PHY support for Exynos 5250. This option requires that
 160           Samsung USB 2.0 PHY driver is enabled and means that support for this
 161           particular SoC is compiled in the driver. In case of Exynos 5250 four
 162           phys are available - device, host, HSIC0 and HSIC.
 163
 164 config PHY_EXYNOS5_USBDRD
 165         tristate "Exynos5 SoC series USB DRD PHY driver"
 166         depends on ARCH_EXYNOS5 && OF
 167         depends on HAS_IOMEM
 168         select GENERIC_PHY
 169         select MFD_SYSCON
 170         help
 171           Enable USB DRD PHY support for Exynos 5 SoC series.
 172           This driver provides PHY interface for USB 3.0 DRD controller
 173           present on Exynos5 SoC series.
 174
 175 config PHY_XGENE
 176         tristate "APM X-Gene 15Gbps PHY support"
 177         depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST)
 178         select GENERIC_PHY
 179         help
 180           This option enables support for APM X-Gene SoC multi-purpose PHY.
 181
 182 endmenu