drivers/pinctrl/Kconfig

   1 #
   2 # PINCTRL infrastructure and drivers
   3 #
   4
   5 config PINCTRL
   6         bool
   7
   8 if PINCTRL
   9
  10 menu "Pin controllers"
  11         depends on PINCTRL
  12
  13 config PINMUX
  14         bool "Support pin multiplexing controllers" if COMPILE_TEST
  15
  16 config PINCONF
  17         bool "Support pin configuration controllers" if COMPILE_TEST
  18
  19 config GENERIC_PINCONF
  20         bool
  21         select PINCONF
  22
  23 config DEBUG_PINCTRL
  24         bool "Debug PINCTRL calls"
  25         depends on DEBUG_KERNEL
  26         help
  27           Say Y here to add some extra checks and diagnostics to PINCTRL calls.
  28
  29 config PINCTRL_ADI2
  30         bool "ADI pin controller driver"
  31         depends on BLACKFIN
  32         select PINMUX
  33         select IRQ_DOMAIN
  34         help
  35           This is the pin controller and gpio driver for ADI BF54x, BF60x and
  36           future processors. This option is selected automatically when specific
  37           machine and arch are selected to build.
  38
  39 config PINCTRL_AS3722
  40         bool "Pinctrl and GPIO driver for ams AS3722 PMIC"
  41         depends on MFD_AS3722 && GPIOLIB
  42         select PINMUX
  43         select GENERIC_PINCONF
  44         help
  45           AS3722 device supports the configuration of GPIO pins for different
  46           functionality. This driver supports the pinmux, push-pull and
  47           open drain configuration for the GPIO pins of AS3722 devices. It also
  48           supports the GPIO functionality through gpiolib.
  49
  50 config PINCTRL_BF54x
  51         def_bool y if BF54x
  52         select PINCTRL_ADI2
  53
  54 config PINCTRL_BF60x
  55         def_bool y if BF60x
  56         select PINCTRL_ADI2
  57
  58 config PINCTRL_AT91
  59         bool "AT91 pinctrl driver"
  60         depends on OF
  61         depends on ARCH_AT91
  62         select PINMUX
  63         select PINCONF
  64         select GPIOLIB
  65         select OF_GPIO
  66         select GPIOLIB_IRQCHIP
  67         help
  68           Say Y here to enable the at91 pinctrl driver
  69
  70 config PINCTRL_AMD
  71         bool "AMD GPIO pin control"
  72         depends on GPIOLIB
  73         select GPIOLIB_IRQCHIP
  74         select PINCONF
  75         select GENERIC_PINCONF
  76         help
  77           driver for memory mapped GPIO functionality on AMD platforms
  78           (x86 or arm).Most pins are usually muxed to some other
  79           functionality by firmware,so only a small amount is available
  80           for gpio use.
  81
  82           Requires ACPI/FDT device enumeration code to set up a platform
  83           device.
  84
  85 config PINCTRL_LANTIQ
  86         bool
  87         depends on LANTIQ
  88         select PINMUX
  89         select PINCONF
  90
  91 config PINCTRL_FALCON
  92         bool
  93         depends on SOC_FALCON
  94         depends on PINCTRL_LANTIQ
  95
  96 config PINCTRL_MESON
  97         bool
  98         depends on OF
  99         select PINMUX
 100         select PINCONF
 101         select GENERIC_PINCONF
 102         select GPIOLIB
 103         select OF_GPIO
 104         select REGMAP_MMIO
 105
 106 config PINCTRL_ROCKCHIP
 107         bool
 108         select PINMUX
 109         select GENERIC_PINCONF
 110         select GENERIC_IRQ_CHIP
 111         select MFD_SYSCON
 112
 113 config PINCTRL_SINGLE
 114         tristate "One-register-per-pin type device tree based pinctrl driver"
 115         depends on OF
 116         select PINMUX
 117         select PINCONF
 118         select GENERIC_PINCONF
 119         help
 120           This selects the device tree based generic pinctrl driver.
 121
 122 config PINCTRL_SIRF
 123         bool "CSR SiRFprimaII pin controller driver"
 124         depends on ARCH_SIRF
 125         select PINMUX
 126         select GPIOLIB_IRQCHIP
 127
 128 config PINCTRL_ST
 129         bool
 130         depends on OF
 131         select PINMUX
 132         select PINCONF
 133         select GPIOLIB_IRQCHIP
 134
 135 config PINCTRL_TEGRA
 136         bool
 137         select PINMUX
 138         select PINCONF
 139
 140 config PINCTRL_TEGRA20
 141         bool
 142         select PINCTRL_TEGRA
 143
 144 config PINCTRL_TEGRA30
 145         bool
 146         select PINCTRL_TEGRA
 147
 148 config PINCTRL_TEGRA114
 149         bool
 150         select PINCTRL_TEGRA
 151
 152 config PINCTRL_TEGRA124
 153         bool
 154         select PINCTRL_TEGRA
 155
 156 config PINCTRL_TEGRA210
 157         bool
 158         select PINCTRL_TEGRA
 159
 160 config PINCTRL_TEGRA_XUSB
 161         def_bool y if ARCH_TEGRA
 162         select GENERIC_PHY
 163         select PINCONF
 164         select PINMUX
 165
 166 config PINCTRL_TZ1090
 167         bool "Toumaz Xenif TZ1090 pin control driver"
 168         depends on SOC_TZ1090
 169         select PINMUX
 170         select GENERIC_PINCONF
 171
 172 config PINCTRL_TZ1090_PDC
 173         bool "Toumaz Xenif TZ1090 PDC pin control driver"
 174         depends on SOC_TZ1090
 175         select PINMUX
 176         select PINCONF
 177
 178 config PINCTRL_U300
 179         bool "U300 pin controller driver"
 180         depends on ARCH_U300
 181         select PINMUX
 182         select GENERIC_PINCONF
 183
 184 config PINCTRL_COH901
 185         bool "ST-Ericsson U300 COH 901 335/571 GPIO"
 186         depends on GPIOLIB && ARCH_U300 && PINCTRL_U300
 187         select GPIOLIB_IRQCHIP
 188         help
 189           Say yes here to support GPIO interface on ST-Ericsson U300.
 190           The names of the two IP block variants supported are
 191           COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
 192           ports of 8 GPIO pins each.
 193
 194 config PINCTRL_PALMAS
 195         bool "Pinctrl driver for the PALMAS Series MFD devices"
 196         depends on OF && MFD_PALMAS
 197         select PINMUX
 198         select GENERIC_PINCONF
 199         help
 200           Palmas device supports the configuration of pins for different
 201           functionality. This driver supports the pinmux, push-pull and
 202           open drain configuration for the Palmas series devices like
 203           TPS65913, TPS80036 etc.
 204
 205 config PINCTRL_ZYNQ
 206         bool "Pinctrl driver for Xilinx Zynq"
 207         depends on ARCH_ZYNQ
 208         select PINMUX
 209         select GENERIC_PINCONF
 210         help
 211           This selectes the pinctrl driver for Xilinx Zynq.
 212
 213 source "drivers/pinctrl/bcm/Kconfig"
 214 source "drivers/pinctrl/berlin/Kconfig"
 215 source "drivers/pinctrl/freescale/Kconfig"
 216 source "drivers/pinctrl/intel/Kconfig"
 217 source "drivers/pinctrl/mvebu/Kconfig"
 218 source "drivers/pinctrl/nomadik/Kconfig"
 219 source "drivers/pinctrl/qcom/Kconfig"
 220 source "drivers/pinctrl/samsung/Kconfig"
 221 source "drivers/pinctrl/sh-pfc/Kconfig"
 222 source "drivers/pinctrl/spear/Kconfig"
 223 source "drivers/pinctrl/sunxi/Kconfig"
 224 source "drivers/pinctrl/vt8500/Kconfig"
 225 source "drivers/pinctrl/mediatek/Kconfig"
 226
 227 config PINCTRL_XWAY
 228         bool
 229         depends on SOC_TYPE_XWAY
 230         depends on PINCTRL_LANTIQ
 231
 232 config PINCTRL_TB10X
 233         bool
 234         depends on OF && ARC_PLAT_TB10X
 235         select GPIOLIB
 236
 237 endmenu
 238
 239 endif