drivers/pinctrl/Kconfig

   1 #
   2 # PINCTRL infrastructure and drivers
   3 #
   4
   5 config PINCTRL
   6         bool
   7
   8 if PINCTRL
   9
  10 menu "Pin controllers"
  11         depends on PINCTRL
  12
  13 config PINMUX
  14         bool "Support pin multiplexing controllers" if COMPILE_TEST
  15
  16 config PINCONF
  17         bool "Support pin configuration controllers" if COMPILE_TEST
  18
  19 config GENERIC_PINCONF
  20         bool
  21         select PINCONF
  22
  23 config DEBUG_PINCTRL
  24         bool "Debug PINCTRL calls"
  25         depends on DEBUG_KERNEL
  26         help
  27           Say Y here to add some extra checks and diagnostics to PINCTRL calls.
  28
  29 config PINCTRL_ADI2
  30         bool "ADI pin controller driver"
  31         depends on BLACKFIN
  32         select PINMUX
  33         select IRQ_DOMAIN
  34         help
  35           This is the pin controller and gpio driver for ADI BF54x, BF60x and
  36           future processors. This option is selected automatically when specific
  37           machine and arch are selected to build.
  38
  39 config PINCTRL_AS3722
  40         bool "Pinctrl and GPIO driver for ams AS3722 PMIC"
  41         depends on MFD_AS3722 && GPIOLIB
  42         select PINMUX
  43         select GENERIC_PINCONF
  44         help
  45           AS3722 device supports the configuration of GPIO pins for different
  46           functionality. This driver supports the pinmux, push-pull and
  47           open drain configuration for the GPIO pins of AS3722 devices. It also
  48           supports the GPIO functionality through gpiolib.
  49
  50 config PINCTRL_BF54x
  51         def_bool y if BF54x
  52         select PINCTRL_ADI2
  53
  54 config PINCTRL_BF60x
  55         def_bool y if BF60x
  56         select PINCTRL_ADI2
  57
  58 config PINCTRL_AT91
  59         bool "AT91 pinctrl driver"
  60         depends on OF
  61         depends on ARCH_AT91
  62         select PINMUX
  63         select PINCONF
  64         select GPIOLIB
  65         select OF_GPIO
  66         select GPIOLIB_IRQCHIP
  67         help
  68           Say Y here to enable the at91 pinctrl driver
  69
  70 config PINCTRL_AT91PIO4
  71         bool "AT91 PIO4 pinctrl driver"
  72         depends on OF
  73         depends on ARCH_AT91
  74         select PINMUX
  75         select GENERIC_PINCONF
  76         select GPIOLIB
  77         select GPIOLIB_IRQCHIP
  78         select OF_GPIO
  79         help
  80           Say Y here to enable the at91 pinctrl/gpio driver for Atmel PIO4
  81           controller available on sama5d2 SoC.
  82
  83 config PINCTRL_AMD
  84         bool "AMD GPIO pin control"
  85         depends on GPIOLIB
  86         select GPIOLIB_IRQCHIP
  87         select PINCONF
  88         select GENERIC_PINCONF
  89         help
  90           driver for memory mapped GPIO functionality on AMD platforms
  91           (x86 or arm).Most pins are usually muxed to some other
  92           functionality by firmware,so only a small amount is available
  93           for gpio use.
  94
  95           Requires ACPI/FDT device enumeration code to set up a platform
  96           device.
  97
  98 config PINCTRL_DIGICOLOR
  99         bool
 100         depends on OF && (ARCH_DIGICOLOR || COMPILE_TEST)
 101         select PINMUX
 102         select GENERIC_PINCONF
 103
 104 config PINCTRL_LANTIQ
 105         bool
 106         depends on LANTIQ
 107         select PINMUX
 108         select PINCONF
 109
 110 config PINCTRL_LPC18XX
 111         bool "NXP LPC18XX/43XX SCU pinctrl driver"
 112         depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
 113         default ARCH_LPC18XX
 114         select PINMUX
 115         select GENERIC_PINCONF
 116         help
 117           Pinctrl driver for NXP LPC18xx/43xx System Control Unit (SCU).
 118
 119 config PINCTRL_FALCON
 120         bool
 121         depends on SOC_FALCON
 122         depends on PINCTRL_LANTIQ
 123
 124 config PINCTRL_MESON
 125         bool
 126         depends on OF
 127         select PINMUX
 128         select PINCONF
 129         select GENERIC_PINCONF
 130         select GPIOLIB
 131         select OF_GPIO
 132         select REGMAP_MMIO
 133
 134 config PINCTRL_ROCKCHIP
 135         bool
 136         select PINMUX
 137         select GENERIC_PINCONF
 138         select GENERIC_IRQ_CHIP
 139         select MFD_SYSCON
 140
 141 config PINCTRL_SINGLE
 142         tristate "One-register-per-pin type device tree based pinctrl driver"
 143         depends on OF
 144         select PINMUX
 145         select PINCONF
 146         select GENERIC_PINCONF
 147         help
 148           This selects the device tree based generic pinctrl driver.
 149
 150 config PINCTRL_SIRF
 151         bool "CSR SiRFprimaII pin controller driver"
 152         depends on ARCH_SIRF
 153         select PINMUX
 154         select PINCONF
 155         select GENERIC_PINCONF
 156         select GPIOLIB_IRQCHIP
 157
 158 config PINCTRL_PISTACHIO
 159         def_bool y if MACH_PISTACHIO
 160         depends on GPIOLIB
 161         select PINMUX
 162         select GENERIC_PINCONF
 163         select GPIOLIB_IRQCHIP
 164         select OF_GPIO
 165
 166 config PINCTRL_ST
 167         bool
 168         depends on OF
 169         select PINMUX
 170         select PINCONF
 171         select GPIOLIB_IRQCHIP
 172
 173 config PINCTRL_TEGRA
 174         bool
 175         select PINMUX
 176         select PINCONF
 177
 178 config PINCTRL_TEGRA20
 179         bool
 180         select PINCTRL_TEGRA
 181
 182 config PINCTRL_TEGRA30
 183         bool
 184         select PINCTRL_TEGRA
 185
 186 config PINCTRL_TEGRA114
 187         bool
 188         select PINCTRL_TEGRA
 189
 190 config PINCTRL_TEGRA124
 191         bool
 192         select PINCTRL_TEGRA
 193
 194 config PINCTRL_TEGRA210
 195         bool
 196         select PINCTRL_TEGRA
 197
 198 config PINCTRL_TEGRA_XUSB
 199         def_bool y if ARCH_TEGRA
 200         select GENERIC_PHY
 201         select PINCONF
 202         select PINMUX
 203
 204 config PINCTRL_TZ1090
 205         bool "Toumaz Xenif TZ1090 pin control driver"
 206         depends on SOC_TZ1090
 207         select PINMUX
 208         select GENERIC_PINCONF
 209
 210 config PINCTRL_TZ1090_PDC
 211         bool "Toumaz Xenif TZ1090 PDC pin control driver"
 212         depends on SOC_TZ1090
 213         select PINMUX
 214         select PINCONF
 215
 216 config PINCTRL_U300
 217         bool "U300 pin controller driver"
 218         depends on ARCH_U300
 219         select PINMUX
 220         select GENERIC_PINCONF
 221
 222 config PINCTRL_COH901
 223         bool "ST-Ericsson U300 COH 901 335/571 GPIO"
 224         depends on GPIOLIB && ARCH_U300 && PINCTRL_U300
 225         select GPIOLIB_IRQCHIP
 226         help
 227           Say yes here to support GPIO interface on ST-Ericsson U300.
 228           The names of the two IP block variants supported are
 229           COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
 230           ports of 8 GPIO pins each.
 231
 232 config PINCTRL_PALMAS
 233         bool "Pinctrl driver for the PALMAS Series MFD devices"
 234         depends on OF && MFD_PALMAS
 235         select PINMUX
 236         select GENERIC_PINCONF
 237         help
 238           Palmas device supports the configuration of pins for different
 239           functionality. This driver supports the pinmux, push-pull and
 240           open drain configuration for the Palmas series devices like
 241           TPS65913, TPS80036 etc.
 242
 243 config PINCTRL_ZYNQ
 244         bool "Pinctrl driver for Xilinx Zynq"
 245         depends on ARCH_ZYNQ
 246         select PINMUX
 247         select GENERIC_PINCONF
 248         help
 249           This selectes the pinctrl driver for Xilinx Zynq.
 250
 251 source "drivers/pinctrl/bcm/Kconfig"
 252 source "drivers/pinctrl/berlin/Kconfig"
 253 source "drivers/pinctrl/freescale/Kconfig"
 254 source "drivers/pinctrl/intel/Kconfig"
 255 source "drivers/pinctrl/mvebu/Kconfig"
 256 source "drivers/pinctrl/nomadik/Kconfig"
 257 source "drivers/pinctrl/qcom/Kconfig"
 258 source "drivers/pinctrl/samsung/Kconfig"
 259 source "drivers/pinctrl/sh-pfc/Kconfig"
 260 source "drivers/pinctrl/spear/Kconfig"
 261 source "drivers/pinctrl/sunxi/Kconfig"
 262 source "drivers/pinctrl/uniphier/Kconfig"
 263 source "drivers/pinctrl/vt8500/Kconfig"
 264 source "drivers/pinctrl/mediatek/Kconfig"
 265
 266 config PINCTRL_XWAY
 267         bool
 268         depends on SOC_TYPE_XWAY
 269         depends on PINCTRL_LANTIQ
 270
 271 config PINCTRL_TB10X
 272         bool
 273         depends on OF && ARC_PLAT_TB10X
 274         select GPIOLIB
 275
 276 endmenu
 277
 278 endif