drivers/pinctrl/Kconfig

   1 #
   2 # PINCTRL infrastructure and drivers
   3 #
   4
   5 config PINCTRL
   6         bool
   7
   8 if PINCTRL
   9
  10 menu "Pin controllers"
  11         depends on PINCTRL
  12
  13 config PINMUX
  14         bool "Support pin multiplexing controllers" if COMPILE_TEST
  15
  16 config PINCONF
  17         bool "Support pin configuration controllers" if COMPILE_TEST
  18
  19 config GENERIC_PINCONF
  20         bool
  21         select PINCONF
  22
  23 config DEBUG_PINCTRL
  24         bool "Debug PINCTRL calls"
  25         depends on DEBUG_KERNEL
  26         help
  27           Say Y here to add some extra checks and diagnostics to PINCTRL calls.
  28
  29 config PINCTRL_ADI2
  30         bool "ADI pin controller driver"
  31         depends on BLACKFIN
  32         select PINMUX
  33         select IRQ_DOMAIN
  34         help
  35           This is the pin controller and gpio driver for ADI BF54x, BF60x and
  36           future processors. This option is selected automatically when specific
  37           machine and arch are selected to build.
  38
  39 config PINCTRL_AS3722
  40         bool "Pinctrl and GPIO driver for ams AS3722 PMIC"
  41         depends on MFD_AS3722 && GPIOLIB
  42         select PINMUX
  43         select GENERIC_PINCONF
  44         help
  45           AS3722 device supports the configuration of GPIO pins for different
  46           functionality. This driver supports the pinmux, push-pull and
  47           open drain configuration for the GPIO pins of AS3722 devices. It also
  48           supports the GPIO functionality through gpiolib.
  49
  50 config PINCTRL_BF54x
  51         def_bool y if BF54x
  52         select PINCTRL_ADI2
  53
  54 config PINCTRL_BF60x
  55         def_bool y if BF60x
  56         select PINCTRL_ADI2
  57
  58 config PINCTRL_AT91
  59         bool "AT91 pinctrl driver"
  60         depends on OF
  61         depends on ARCH_AT91
  62         select PINMUX
  63         select PINCONF
  64         select GPIOLIB
  65         select OF_GPIO
  66         select GPIOLIB_IRQCHIP
  67         help
  68           Say Y here to enable the at91 pinctrl driver
  69
  70 config PINCTRL_BCM2835
  71         bool
  72         select PINMUX
  73         select PINCONF
  74
  75 config PINCTRL_BCM281XX
  76         bool "Broadcom BCM281xx pinctrl driver"
  77         depends on OF && (ARCH_BCM_MOBILE || COMPILE_TEST)
  78         select PINMUX
  79         select PINCONF
  80         select GENERIC_PINCONF
  81         select REGMAP_MMIO
  82         help
  83           Say Y here to support Broadcom BCM281xx pinctrl driver, which is used
  84           for the BCM281xx SoC family, including BCM11130, BCM11140, BCM11351,
  85           BCM28145, and BCM28155 SoCs.  This driver requires the pinctrl
  86           framework.  GPIO is provided by a separate GPIO driver.
  87
  88 config PINCTRL_LANTIQ
  89         bool
  90         depends on LANTIQ
  91         select PINMUX
  92         select PINCONF
  93
  94 config PINCTRL_FALCON
  95         bool
  96         depends on SOC_FALCON
  97         depends on PINCTRL_LANTIQ
  98
  99 config PINCTRL_MESON
 100         bool
 101         select PINMUX
 102         select PINCONF
 103         select GENERIC_PINCONF
 104         select OF_GPIO
 105         select REGMAP_MMIO
 106
 107 config PINCTRL_ROCKCHIP
 108         bool
 109         select PINMUX
 110         select GENERIC_PINCONF
 111         select GENERIC_IRQ_CHIP
 112         select MFD_SYSCON
 113
 114 config PINCTRL_SINGLE
 115         tristate "One-register-per-pin type device tree based pinctrl driver"
 116         depends on OF
 117         select PINMUX
 118         select PINCONF
 119         select GENERIC_PINCONF
 120         help
 121           This selects the device tree based generic pinctrl driver.
 122
 123 config PINCTRL_SIRF
 124         bool "CSR SiRFprimaII pin controller driver"
 125         depends on ARCH_SIRF
 126         select PINMUX
 127         select GPIOLIB_IRQCHIP
 128
 129 config PINCTRL_ST
 130         bool
 131         depends on OF
 132         select PINMUX
 133         select PINCONF
 134         select GPIOLIB_IRQCHIP
 135
 136 config PINCTRL_TEGRA
 137         bool
 138         select PINMUX
 139         select PINCONF
 140
 141 config PINCTRL_TEGRA20
 142         bool
 143         select PINCTRL_TEGRA
 144
 145 config PINCTRL_TEGRA30
 146         bool
 147         select PINCTRL_TEGRA
 148
 149 config PINCTRL_TEGRA114
 150         bool
 151         select PINCTRL_TEGRA
 152
 153 config PINCTRL_TEGRA124
 154         bool
 155         select PINCTRL_TEGRA
 156
 157 config PINCTRL_TEGRA_XUSB
 158         def_bool y if ARCH_TEGRA
 159         select GENERIC_PHY
 160         select PINCONF
 161         select PINMUX
 162
 163 config PINCTRL_TZ1090
 164         bool "Toumaz Xenif TZ1090 pin control driver"
 165         depends on SOC_TZ1090
 166         select PINMUX
 167         select GENERIC_PINCONF
 168
 169 config PINCTRL_TZ1090_PDC
 170         bool "Toumaz Xenif TZ1090 PDC pin control driver"
 171         depends on SOC_TZ1090
 172         select PINMUX
 173         select PINCONF
 174
 175 config PINCTRL_U300
 176         bool "U300 pin controller driver"
 177         depends on ARCH_U300
 178         select PINMUX
 179         select GENERIC_PINCONF
 180
 181 config PINCTRL_COH901
 182         bool "ST-Ericsson U300 COH 901 335/571 GPIO"
 183         depends on GPIOLIB && ARCH_U300 && PINCTRL_U300
 184         select GPIOLIB_IRQCHIP
 185         help
 186           Say yes here to support GPIO interface on ST-Ericsson U300.
 187           The names of the two IP block variants supported are
 188           COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
 189           ports of 8 GPIO pins each.
 190
 191 config PINCTRL_PALMAS
 192         bool "Pinctrl driver for the PALMAS Series MFD devices"
 193         depends on OF && MFD_PALMAS
 194         select PINMUX
 195         select GENERIC_PINCONF
 196         help
 197           Palmas device supports the configuration of pins for different
 198           functionality. This driver supports the pinmux, push-pull and
 199           open drain configuration for the Palmas series devices like
 200           TPS65913, TPS80036 etc.
 201
 202 config PINCTRL_ZYNQ
 203         bool "Pinctrl driver for Xilinx Zynq"
 204         depends on ARCH_ZYNQ
 205         select PINMUX
 206         select GENERIC_PINCONF
 207         help
 208           This selectes the pinctrl driver for Xilinx Zynq.
 209
 210 source "drivers/pinctrl/berlin/Kconfig"
 211 source "drivers/pinctrl/freescale/Kconfig"
 212 source "drivers/pinctrl/intel/Kconfig"
 213 source "drivers/pinctrl/mvebu/Kconfig"
 214 source "drivers/pinctrl/nomadik/Kconfig"
 215 source "drivers/pinctrl/qcom/Kconfig"
 216 source "drivers/pinctrl/samsung/Kconfig"
 217 source "drivers/pinctrl/sh-pfc/Kconfig"
 218 source "drivers/pinctrl/spear/Kconfig"
 219 source "drivers/pinctrl/sunxi/Kconfig"
 220 source "drivers/pinctrl/vt8500/Kconfig"
 221
 222 config PINCTRL_XWAY
 223         bool
 224         depends on SOC_TYPE_XWAY
 225         depends on PINCTRL_LANTIQ
 226
 227 config PINCTRL_TB10X
 228         bool
 229         depends on ARC_PLAT_TB10X
 230
 231 endmenu
 232
 233 endif