drivers/pinctrl/Kconfig

   1 #
   2 # PINCTRL infrastructure and drivers
   3 #
   4
   5 config PINCTRL
   6         bool
   7
   8 if PINCTRL
   9
  10 menu "Pin controllers"
  11         depends on PINCTRL
  12
  13 config PINMUX
  14         bool "Support pin multiplexing controllers" if COMPILE_TEST
  15
  16 config PINCONF
  17         bool "Support pin configuration controllers" if COMPILE_TEST
  18
  19 config GENERIC_PINCONF
  20         bool
  21         select PINCONF
  22
  23 config DEBUG_PINCTRL
  24         bool "Debug PINCTRL calls"
  25         depends on DEBUG_KERNEL
  26         help
  27           Say Y here to add some extra checks and diagnostics to PINCTRL calls.
  28
  29 config PINCTRL_ADI2
  30         bool "ADI pin controller driver"
  31         depends on BLACKFIN
  32         select PINMUX
  33         select IRQ_DOMAIN
  34         help
  35           This is the pin controller and gpio driver for ADI BF54x, BF60x and
  36           future processors. This option is selected automatically when specific
  37           machine and arch are selected to build.
  38
  39 config PINCTRL_AS3722
  40         bool "Pinctrl and GPIO driver for ams AS3722 PMIC"
  41         depends on MFD_AS3722 && GPIOLIB
  42         select PINMUX
  43         select GENERIC_PINCONF
  44         help
  45           AS3722 device supports the configuration of GPIO pins for different
  46           functionality. This driver supports the pinmux, push-pull and
  47           open drain configuration for the GPIO pins of AS3722 devices. It also
  48           supports the GPIO functionality through gpiolib.
  49
  50 config PINCTRL_BF54x
  51         def_bool y if BF54x
  52         select PINCTRL_ADI2
  53
  54 config PINCTRL_BF60x
  55         def_bool y if BF60x
  56         select PINCTRL_ADI2
  57
  58 config PINCTRL_AT91
  59         bool "AT91 pinctrl driver"
  60         depends on OF
  61         depends on ARCH_AT91
  62         select PINMUX
  63         select PINCONF
  64         select GPIOLIB
  65         select OF_GPIO
  66         select GPIOLIB_IRQCHIP
  67         help
  68           Say Y here to enable the at91 pinctrl driver
  69
  70 config PINCTRL_BAYTRAIL
  71         bool "Intel Baytrail GPIO pin control"
  72         depends on GPIOLIB && ACPI && X86
  73         select GPIOLIB_IRQCHIP
  74         help
  75           driver for memory mapped GPIO functionality on Intel Baytrail
  76           platforms. Supports 3 banks with 102, 28 and 44 gpios.
  77           Most pins are usually muxed to some other functionality by firmware,
  78           so only a small amount is available for gpio use.
  79
  80           Requires ACPI device enumeration code to set up a platform device.
  81
  82 config PINCTRL_BCM2835
  83         bool
  84         select PINMUX
  85         select PINCONF
  86
  87 config PINCTRL_BCM281XX
  88         bool "Broadcom BCM281xx pinctrl driver"
  89         depends on OF
  90         select PINMUX
  91         select PINCONF
  92         select GENERIC_PINCONF
  93         select REGMAP_MMIO
  94         help
  95           Say Y here to support Broadcom BCM281xx pinctrl driver, which is used
  96           for the BCM281xx SoC family, including BCM11130, BCM11140, BCM11351,
  97           BCM28145, and BCM28155 SoCs.  This driver requires the pinctrl
  98           framework.  GPIO is provided by a separate GPIO driver.
  99
 100 config PINCTRL_IMX
 101         bool
 102         select PINMUX
 103         select PINCONF
 104
 105 config PINCTRL_IMX1_CORE
 106         bool
 107         select PINMUX
 108         select PINCONF
 109
 110 config PINCTRL_IMX1
 111         bool "IMX1 pinctrl driver"
 112         depends on SOC_IMX1
 113         select PINCTRL_IMX1_CORE
 114         help
 115           Say Y here to enable the imx1 pinctrl driver
 116
 117 config PINCTRL_IMX27
 118         bool "IMX27 pinctrl driver"
 119         depends on SOC_IMX27
 120         select PINCTRL_IMX1_CORE
 121         help
 122           Say Y here to enable the imx27 pinctrl driver
 123
 124
 125 config PINCTRL_IMX25
 126         bool "IMX25 pinctrl driver"
 127         depends on OF
 128         depends on SOC_IMX25
 129         select PINCTRL_IMX
 130         help
 131           Say Y here to enable the imx25 pinctrl driver
 132
 133 config PINCTRL_IMX35
 134         bool "IMX35 pinctrl driver"
 135         depends on SOC_IMX35
 136         select PINCTRL_IMX
 137         help
 138           Say Y here to enable the imx35 pinctrl driver
 139
 140 config PINCTRL_IMX50
 141         bool "IMX50 pinctrl driver"
 142         depends on SOC_IMX50
 143         select PINCTRL_IMX
 144         help
 145           Say Y here to enable the imx50 pinctrl driver
 146
 147 config PINCTRL_IMX51
 148         bool "IMX51 pinctrl driver"
 149         depends on SOC_IMX51
 150         select PINCTRL_IMX
 151         help
 152           Say Y here to enable the imx51 pinctrl driver
 153
 154 config PINCTRL_IMX53
 155         bool "IMX53 pinctrl driver"
 156         depends on SOC_IMX53
 157         select PINCTRL_IMX
 158         help
 159           Say Y here to enable the imx53 pinctrl driver
 160
 161 config PINCTRL_IMX6Q
 162         bool "IMX6Q/DL pinctrl driver"
 163         depends on SOC_IMX6Q
 164         select PINCTRL_IMX
 165         help
 166           Say Y here to enable the imx6q/dl pinctrl driver
 167
 168 config PINCTRL_IMX6SL
 169         bool "IMX6SL pinctrl driver"
 170         depends on SOC_IMX6SL
 171         select PINCTRL_IMX
 172         help
 173           Say Y here to enable the imx6sl pinctrl driver
 174
 175 config PINCTRL_IMX6SX
 176         bool "IMX6SX pinctrl driver"
 177         depends on SOC_IMX6SX
 178         select PINCTRL_IMX
 179         help
 180           Say Y here to enable the imx6sx pinctrl driver
 181
 182 config PINCTRL_VF610
 183         bool "Freescale Vybrid VF610 pinctrl driver"
 184         depends on SOC_VF610
 185         select PINCTRL_IMX
 186         help
 187           Say Y here to enable the Freescale Vybrid VF610 pinctrl driver
 188
 189 config PINCTRL_LANTIQ
 190         bool
 191         depends on LANTIQ
 192         select PINMUX
 193         select PINCONF
 194
 195 config PINCTRL_FALCON
 196         bool
 197         depends on SOC_FALCON
 198         depends on PINCTRL_LANTIQ
 199
 200 config PINCTRL_MXS
 201         bool
 202         select PINMUX
 203         select PINCONF
 204
 205 config PINCTRL_IMX23
 206         bool
 207         select PINCTRL_MXS
 208
 209 config PINCTRL_IMX28
 210         bool
 211         select PINCTRL_MXS
 212
 213 config PINCTRL_ROCKCHIP
 214         bool
 215         select PINMUX
 216         select GENERIC_PINCONF
 217         select GENERIC_IRQ_CHIP
 218         select MFD_SYSCON
 219
 220 config PINCTRL_SINGLE
 221         tristate "One-register-per-pin type device tree based pinctrl driver"
 222         depends on OF
 223         select PINMUX
 224         select PINCONF
 225         select GENERIC_PINCONF
 226         help
 227           This selects the device tree based generic pinctrl driver.
 228
 229 config PINCTRL_SIRF
 230         bool "CSR SiRFprimaII/SiRFmarco pin controller driver"
 231         depends on ARCH_SIRF
 232         select PINMUX
 233         select GPIOLIB_IRQCHIP
 234
 235 config PINCTRL_ST
 236         bool
 237         depends on OF
 238         select PINMUX
 239         select PINCONF
 240         select GPIOLIB_IRQCHIP
 241
 242 config PINCTRL_TEGRA
 243         bool
 244         select PINMUX
 245         select PINCONF
 246
 247 config PINCTRL_TEGRA20
 248         bool
 249         select PINCTRL_TEGRA
 250
 251 config PINCTRL_TEGRA30
 252         bool
 253         select PINCTRL_TEGRA
 254
 255 config PINCTRL_TEGRA114
 256         bool
 257         select PINCTRL_TEGRA
 258
 259 config PINCTRL_TEGRA124
 260         bool
 261         select PINCTRL_TEGRA
 262
 263 config PINCTRL_TEGRA_XUSB
 264         def_bool y if ARCH_TEGRA
 265         select GENERIC_PHY
 266         select PINCONF
 267         select PINMUX
 268
 269 config PINCTRL_TZ1090
 270         bool "Toumaz Xenif TZ1090 pin control driver"
 271         depends on SOC_TZ1090
 272         select PINMUX
 273         select GENERIC_PINCONF
 274
 275 config PINCTRL_TZ1090_PDC
 276         bool "Toumaz Xenif TZ1090 PDC pin control driver"
 277         depends on SOC_TZ1090
 278         select PINMUX
 279         select PINCONF
 280
 281 config PINCTRL_U300
 282         bool "U300 pin controller driver"
 283         depends on ARCH_U300
 284         select PINMUX
 285         select GENERIC_PINCONF
 286
 287 config PINCTRL_COH901
 288         bool "ST-Ericsson U300 COH 901 335/571 GPIO"
 289         depends on GPIOLIB && ARCH_U300 && PINCTRL_U300
 290         select GPIOLIB_IRQCHIP
 291         help
 292           Say yes here to support GPIO interface on ST-Ericsson U300.
 293           The names of the two IP block variants supported are
 294           COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
 295           ports of 8 GPIO pins each.
 296
 297 config PINCTRL_PALMAS
 298         bool "Pinctrl driver for the PALMAS Series MFD devices"
 299         depends on OF && MFD_PALMAS
 300         select PINMUX
 301         select GENERIC_PINCONF
 302         help
 303           Palmas device supports the configuration of pins for different
 304           functionality. This driver supports the pinmux, push-pull and
 305           open drain configuration for the Palmas series devices like
 306           TPS65913, TPS80036 etc.
 307
 308 source "drivers/pinctrl/berlin/Kconfig"
 309 source "drivers/pinctrl/mvebu/Kconfig"
 310 source "drivers/pinctrl/nomadik/Kconfig"
 311 source "drivers/pinctrl/qcom/Kconfig"
 312 source "drivers/pinctrl/samsung/Kconfig"
 313 source "drivers/pinctrl/sh-pfc/Kconfig"
 314 source "drivers/pinctrl/spear/Kconfig"
 315 source "drivers/pinctrl/sunxi/Kconfig"
 316 source "drivers/pinctrl/vt8500/Kconfig"
 317
 318 config PINCTRL_XWAY
 319         bool
 320         depends on SOC_TYPE_XWAY
 321         depends on PINCTRL_LANTIQ
 322
 323 config PINCTRL_TB10X
 324         bool
 325         depends on ARC_PLAT_TB10X
 326
 327 endmenu
 328
 329 endif