projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge branch 'pm-tools'
[deliverable/linux.git] / drivers / pinctrl / pinctrl-abx500.c
1 /*
2 * Copyright (C) ST-Ericsson SA 2013
3 *
4 * Author: Patrice Chotard <patrice.chotard@st.com>
5 * License terms: GNU General Public License (GPL) version 2
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 */
11 #include <linux/kernel.h>
12 #include <linux/types.h>
13 #include <linux/slab.h>
14 #include <linux/init.h>
15 #include <linux/module.h>
16 #include <linux/err.h>
17 #include <linux/of.h>
18 #include <linux/of_device.h>
19 #include <linux/platform_device.h>
20 #include <linux/gpio.h>
21 #include <linux/irq.h>
22 #include <linux/irqdomain.h>
23 #include <linux/interrupt.h>
24 #include <linux/bitops.h>
25 #include <linux/mfd/abx500.h>
26 #include <linux/mfd/abx500/ab8500.h>
27 #include <linux/pinctrl/pinctrl.h>
28 #include <linux/pinctrl/consumer.h>
29 #include <linux/pinctrl/pinmux.h>
30 #include <linux/pinctrl/pinconf.h>
31 #include <linux/pinctrl/pinconf-generic.h>
32 #include <linux/pinctrl/machine.h>
33
34 #include "pinctrl-abx500.h"
35 #include "core.h"
36 #include "pinconf.h"
37
38 /*
39 * The AB9540 and AB8540 GPIO support are extended versions
40 * of the AB8500 GPIO support.
41 * The AB9540 supports an additional (7th) register so that
42 * more GPIO may be configured and used.
43 * The AB8540 supports 4 new gpios (GPIOx_VBAT) that have
44 * internal pull-up and pull-down capabilities.
45 */
46
47 /*
48 * GPIO registers offset
49 * Bank: 0x10
50 */
51 #define AB8500_GPIO_SEL1_REG 0x00
52 #define AB8500_GPIO_SEL2_REG 0x01
53 #define AB8500_GPIO_SEL3_REG 0x02
54 #define AB8500_GPIO_SEL4_REG 0x03
55 #define AB8500_GPIO_SEL5_REG 0x04
56 #define AB8500_GPIO_SEL6_REG 0x05
57 #define AB9540_GPIO_SEL7_REG 0x06
58
59 #define AB8500_GPIO_DIR1_REG 0x10
60 #define AB8500_GPIO_DIR2_REG 0x11
61 #define AB8500_GPIO_DIR3_REG 0x12
62 #define AB8500_GPIO_DIR4_REG 0x13
63 #define AB8500_GPIO_DIR5_REG 0x14
64 #define AB8500_GPIO_DIR6_REG 0x15
65 #define AB9540_GPIO_DIR7_REG 0x16
66
67 #define AB8500_GPIO_OUT1_REG 0x20
68 #define AB8500_GPIO_OUT2_REG 0x21
69 #define AB8500_GPIO_OUT3_REG 0x22
70 #define AB8500_GPIO_OUT4_REG 0x23
71 #define AB8500_GPIO_OUT5_REG 0x24
72 #define AB8500_GPIO_OUT6_REG 0x25
73 #define AB9540_GPIO_OUT7_REG 0x26
74
75 #define AB8500_GPIO_PUD1_REG 0x30
76 #define AB8500_GPIO_PUD2_REG 0x31
77 #define AB8500_GPIO_PUD3_REG 0x32
78 #define AB8500_GPIO_PUD4_REG 0x33
79 #define AB8500_GPIO_PUD5_REG 0x34
80 #define AB8500_GPIO_PUD6_REG 0x35
81 #define AB9540_GPIO_PUD7_REG 0x36
82
83 #define AB8500_GPIO_IN1_REG 0x40
84 #define AB8500_GPIO_IN2_REG 0x41
85 #define AB8500_GPIO_IN3_REG 0x42
86 #define AB8500_GPIO_IN4_REG 0x43
87 #define AB8500_GPIO_IN5_REG 0x44
88 #define AB8500_GPIO_IN6_REG 0x45
89 #define AB9540_GPIO_IN7_REG 0x46
90 #define AB8540_GPIO_VINSEL_REG 0x47
91 #define AB8540_GPIO_PULL_UPDOWN_REG 0x48
92 #define AB8500_GPIO_ALTFUN_REG 0x50
93 #define AB8540_GPIO_PULL_UPDOWN_MASK 0x03
94 #define AB8540_GPIO_VINSEL_MASK 0x03
95 #define AB8540_GPIOX_VBAT_START 51
96 #define AB8540_GPIOX_VBAT_END 54
97
98 #define ABX500_GPIO_INPUT 0
99 #define ABX500_GPIO_OUTPUT 1
100
101 struct abx500_pinctrl {
102 struct device *dev;
103 struct pinctrl_dev *pctldev;
104 struct abx500_pinctrl_soc_data *soc;
105 struct gpio_chip chip;
106 struct ab8500 *parent;
107 struct abx500_gpio_irq_cluster *irq_cluster;
108 int irq_cluster_size;
109 };
110
111 /**
112 * to_abx500_pinctrl() - get the pointer to abx500_pinctrl
113 * @chip: Member of the structure abx500_pinctrl
114 */
115 static inline struct abx500_pinctrl *to_abx500_pinctrl(struct gpio_chip *chip)
116 {
117 return container_of(chip, struct abx500_pinctrl, chip);
118 }
119
120 static int abx500_gpio_get_bit(struct gpio_chip *chip, u8 reg,
121 unsigned offset, bool *bit)
122 {
123 struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
124 u8 pos = offset % 8;
125 u8 val;
126 int ret;
127
128 reg += offset / 8;
129 ret = abx500_get_register_interruptible(pct->dev,
130 AB8500_MISC, reg, &val);
131
132 *bit = !!(val & BIT(pos));
133
134 if (ret < 0)
135 dev_err(pct->dev,
136 "%s read reg =%x, offset=%x failed (%d)\n",
137 __func__, reg, offset, ret);
138
139 return ret;
140 }
141
142 static int abx500_gpio_set_bits(struct gpio_chip *chip, u8 reg,
143 unsigned offset, int val)
144 {
145 struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
146 u8 pos = offset % 8;
147 int ret;
148
149 reg += offset / 8;
150 ret = abx500_mask_and_set_register_interruptible(pct->dev,
151 AB8500_MISC, reg, BIT(pos), val << pos);
152 if (ret < 0)
153 dev_err(pct->dev, "%s write reg, %x offset %x failed (%d)\n",
154 __func__, reg, offset, ret);
155
156 return ret;
157 }
158
159 /**
160 * abx500_gpio_get() - Get the particular GPIO value
161 * @chip: Gpio device
162 * @offset: GPIO number to read
163 */
164 static int abx500_gpio_get(struct gpio_chip *chip, unsigned offset)
165 {
166 struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
167 bool bit;
168 bool is_out;
169 u8 gpio_offset = offset - 1;
170 int ret;
171
172 ret = abx500_gpio_get_bit(chip, AB8500_GPIO_DIR1_REG,
173 gpio_offset, &is_out);
174 if (ret < 0)
175 goto out;
176
177 if (is_out)
178 ret = abx500_gpio_get_bit(chip, AB8500_GPIO_OUT1_REG,
179 gpio_offset, &bit);
180 else
181 ret = abx500_gpio_get_bit(chip, AB8500_GPIO_IN1_REG,
182 gpio_offset, &bit);
183 out:
184 if (ret < 0) {
185 dev_err(pct->dev, "%s failed (%d)\n", __func__, ret);
186 return ret;
187 }
188
189 return bit;
190 }
191
192 static void abx500_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
193 {
194 struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
195 int ret;
196
197 ret = abx500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val);
198 if (ret < 0)
199 dev_err(pct->dev, "%s write failed (%d)\n", __func__, ret);
200 }
201
202 static int abx500_get_pull_updown(struct abx500_pinctrl *pct, int offset,
203 enum abx500_gpio_pull_updown *pull_updown)
204 {
205 u8 pos;
206 u8 val;
207 int ret;
208 struct pullud *pullud;
209
210 if (!pct->soc->pullud) {
211 dev_err(pct->dev, "%s AB chip doesn't support pull up/down feature",
212 __func__);
213 ret = -EPERM;
214 goto out;
215 }
216
217 pullud = pct->soc->pullud;
218
219 if ((offset < pullud->first_pin)
220 || (offset > pullud->last_pin)) {
221 ret = -EINVAL;
222 goto out;
223 }
224
225 ret = abx500_get_register_interruptible(pct->dev,
226 AB8500_MISC, AB8540_GPIO_PULL_UPDOWN_REG, &val);
227
228 pos = (offset - pullud->first_pin) << 1;
229 *pull_updown = (val >> pos) & AB8540_GPIO_PULL_UPDOWN_MASK;
230
231 out:
232 if (ret < 0)
233 dev_err(pct->dev, "%s failed (%d)\n", __func__, ret);
234
235 return ret;
236 }
237
238 static int abx500_set_pull_updown(struct abx500_pinctrl *pct,
239 int offset, enum abx500_gpio_pull_updown val)
240 {
241 u8 pos;
242 int ret;
243 struct pullud *pullud;
244
245 if (!pct->soc->pullud) {
246 dev_err(pct->dev, "%s AB chip doesn't support pull up/down feature",
247 __func__);
248 ret = -EPERM;
249 goto out;
250 }
251
252 pullud = pct->soc->pullud;
253
254 if ((offset < pullud->first_pin)
255 || (offset > pullud->last_pin)) {
256 ret = -EINVAL;
257 goto out;
258 }
259 pos = (offset - pullud->first_pin) << 1;
260
261 ret = abx500_mask_and_set_register_interruptible(pct->dev,
262 AB8500_MISC, AB8540_GPIO_PULL_UPDOWN_REG,
263 AB8540_GPIO_PULL_UPDOWN_MASK << pos, val << pos);
264
265 out:
266 if (ret < 0)
267 dev_err(pct->dev, "%s failed (%d)\n", __func__, ret);
268
269 return ret;
270 }
271
272 static bool abx500_pullud_supported(struct gpio_chip *chip, unsigned gpio)
273 {
274 struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
275 struct pullud *pullud = pct->soc->pullud;
276
277 return (pullud &&
278 gpio >= pullud->first_pin &&
279 gpio <= pullud->last_pin);
280 }
281
282 static int abx500_gpio_direction_output(struct gpio_chip *chip,
283 unsigned offset,
284 int val)
285 {
286 struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
287 unsigned gpio;
288 int ret;
289
290 /* set direction as output */
291 ret = abx500_gpio_set_bits(chip,
292 AB8500_GPIO_DIR1_REG,
293 offset,
294 ABX500_GPIO_OUTPUT);
295 if (ret < 0)
296 goto out;
297
298 /* disable pull down */
299 ret = abx500_gpio_set_bits(chip,
300 AB8500_GPIO_PUD1_REG,
301 offset,
302 ABX500_GPIO_PULL_NONE);
303 if (ret < 0)
304 goto out;
305
306 /* if supported, disable both pull down and pull up */
307 gpio = offset + 1;
308 if (abx500_pullud_supported(chip, gpio)) {
309 ret = abx500_set_pull_updown(pct,
310 gpio,
311 ABX500_GPIO_PULL_NONE);
312 }
313 out:
314 if (ret < 0) {
315 dev_err(pct->dev, "%s failed (%d)\n", __func__, ret);
316 return ret;
317 }
318
319 /* set the output as 1 or 0 */
320 return abx500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val);
321 }
322
323 static int abx500_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
324 {
325 /* set the register as input */
326 return abx500_gpio_set_bits(chip,
327 AB8500_GPIO_DIR1_REG,
328 offset,
329 ABX500_GPIO_INPUT);
330 }
331
332 static int abx500_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
333 {
334 struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
335 /* The AB8500 GPIO numbers are off by one */
336 int gpio = offset + 1;
337 int hwirq;
338 int i;
339
340 for (i = 0; i < pct->irq_cluster_size; i++) {
341 struct abx500_gpio_irq_cluster *cluster =
342 &pct->irq_cluster[i];
343
344 if (gpio >= cluster->start && gpio <= cluster->end) {
345 /*
346 * The ABx500 GPIO's associated IRQs are clustered together
347 * throughout the interrupt numbers at irregular intervals.
348 * To solve this quandry, we have placed the read-in values
349 * into the cluster information table.
350 */
351 hwirq = gpio - cluster->start + cluster->to_irq;
352 return irq_create_mapping(pct->parent->domain, hwirq);
353 }
354 }
355
356 return -EINVAL;
357 }
358
359 static int abx500_set_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip,
360 unsigned gpio, int alt_setting)
361 {
362 struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
363 struct alternate_functions af = pct->soc->alternate_functions[gpio];
364 int ret;
365 int val;
366 unsigned offset;
367
368 const char *modes[] = {
369 [ABX500_DEFAULT] = "default",
370 [ABX500_ALT_A] = "altA",
371 [ABX500_ALT_B] = "altB",
372 [ABX500_ALT_C] = "altC",
373 };
374
375 /* sanity check */
376 if (((alt_setting == ABX500_ALT_A) && (af.gpiosel_bit == UNUSED)) ||
377 ((alt_setting == ABX500_ALT_B) && (af.alt_bit1 == UNUSED)) ||
378 ((alt_setting == ABX500_ALT_C) && (af.alt_bit2 == UNUSED))) {
379 dev_dbg(pct->dev, "pin %d doesn't support %s mode\n", gpio,
380 modes[alt_setting]);
381 return -EINVAL;
382 }
383
384 /* on ABx5xx, there is no GPIO0, so adjust the offset */
385 offset = gpio - 1;
386
387 switch (alt_setting) {
388 case ABX500_DEFAULT:
389 /*
390 * for ABx5xx family, default mode is always selected by
391 * writing 0 to GPIOSELx register, except for pins which
392 * support at least ALT_B mode, default mode is selected
393 * by writing 1 to GPIOSELx register
394 */
395 val = 0;
396 if (af.alt_bit1 != UNUSED)
397 val++;
398
399 ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
400 offset, val);
401 break;
402
403 case ABX500_ALT_A:
404 /*
405 * for ABx5xx family, alt_a mode is always selected by
406 * writing 1 to GPIOSELx register, except for pins which
407 * support at least ALT_B mode, alt_a mode is selected
408 * by writing 0 to GPIOSELx register and 0 in ALTFUNC
409 * register
410 */
411 if (af.alt_bit1 != UNUSED) {
412 ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
413 offset, 0);
414 if (ret < 0)
415 goto out;
416
417 ret = abx500_gpio_set_bits(chip,
418 AB8500_GPIO_ALTFUN_REG,
419 af.alt_bit1,
420 !!(af.alta_val & BIT(0)));
421 if (ret < 0)
422 goto out;
423
424 if (af.alt_bit2 != UNUSED)
425 ret = abx500_gpio_set_bits(chip,
426 AB8500_GPIO_ALTFUN_REG,
427 af.alt_bit2,
428 !!(af.alta_val & BIT(1)));
429 } else
430 ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
431 offset, 1);
432 break;
433
434 case ABX500_ALT_B:
435 ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
436 offset, 0);
437 if (ret < 0)
438 goto out;
439
440 ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG,
441 af.alt_bit1, !!(af.altb_val & BIT(0)));
442 if (ret < 0)
443 goto out;
444
445 if (af.alt_bit2 != UNUSED)
446 ret = abx500_gpio_set_bits(chip,
447 AB8500_GPIO_ALTFUN_REG,
448 af.alt_bit2,
449 !!(af.altb_val & BIT(1)));
450 break;
451
452 case ABX500_ALT_C:
453 ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
454 offset, 0);
455 if (ret < 0)
456 goto out;
457
458 ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG,
459 af.alt_bit2, !!(af.altc_val & BIT(0)));
460 if (ret < 0)
461 goto out;
462
463 ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG,
464 af.alt_bit2, !!(af.altc_val & BIT(1)));
465 break;
466
467 default:
468 dev_dbg(pct->dev, "unknow alt_setting %d\n", alt_setting);
469
470 return -EINVAL;
471 }
472 out:
473 if (ret < 0)
474 dev_err(pct->dev, "%s failed (%d)\n", __func__, ret);
475
476 return ret;
477 }
478
479 static int abx500_get_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip,
480 unsigned gpio)
481 {
482 u8 mode;
483 bool bit_mode;
484 bool alt_bit1;
485 bool alt_bit2;
486 struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
487 struct alternate_functions af = pct->soc->alternate_functions[gpio];
488 /* on ABx5xx, there is no GPIO0, so adjust the offset */
489 unsigned offset = gpio - 1;
490 int ret;
491
492 /*
493 * if gpiosel_bit is set to unused,
494 * it means no GPIO or special case
495 */
496 if (af.gpiosel_bit == UNUSED)
497 return ABX500_DEFAULT;
498
499 /* read GpioSelx register */
500 ret = abx500_gpio_get_bit(chip, AB8500_GPIO_SEL1_REG + (offset / 8),
501 af.gpiosel_bit, &bit_mode);
502 if (ret < 0)
503 goto out;
504
505 mode = bit_mode;
506
507 /* sanity check */
508 if ((af.alt_bit1 < UNUSED) || (af.alt_bit1 > 7) ||
509 (af.alt_bit2 < UNUSED) || (af.alt_bit2 > 7)) {
510 dev_err(pct->dev,
511 "alt_bitX value not in correct range (-1 to 7)\n");
512 return -EINVAL;
513 }
514
515 /* if alt_bit2 is used, alt_bit1 must be used too */
516 if ((af.alt_bit2 != UNUSED) && (af.alt_bit1 == UNUSED)) {
517 dev_err(pct->dev,
518 "if alt_bit2 is used, alt_bit1 can't be unused\n");
519 return -EINVAL;
520 }
521
522 /* check if pin use AlternateFunction register */
523 if ((af.alt_bit1 == UNUSED) && (af.alt_bit2 == UNUSED))
524 return mode;
525 /*
526 * if pin GPIOSEL bit is set and pin supports alternate function,
527 * it means DEFAULT mode
528 */
529 if (mode)
530 return ABX500_DEFAULT;
531
532 /*
533 * pin use the AlternatFunction register
534 * read alt_bit1 value
535 */
536 ret = abx500_gpio_get_bit(chip, AB8500_GPIO_ALTFUN_REG,
537 af.alt_bit1, &alt_bit1);
538 if (ret < 0)
539 goto out;
540
541 if (af.alt_bit2 != UNUSED) {
542 /* read alt_bit2 value */
543 ret = abx500_gpio_get_bit(chip, AB8500_GPIO_ALTFUN_REG,
544 af.alt_bit2,
545 &alt_bit2);
546 if (ret < 0)
547 goto out;
548 } else
549 alt_bit2 = 0;
550
551 mode = (alt_bit2 << 1) + alt_bit1;
552 if (mode == af.alta_val)
553 return ABX500_ALT_A;
554 else if (mode == af.altb_val)
555 return ABX500_ALT_B;
556 else
557 return ABX500_ALT_C;
558
559 out:
560 dev_err(pct->dev, "%s failed (%d)\n", __func__, ret);
561 return ret;
562 }
563
564 #ifdef CONFIG_DEBUG_FS
565
566 #include <linux/seq_file.h>
567
568 static void abx500_gpio_dbg_show_one(struct seq_file *s,
569 struct pinctrl_dev *pctldev,
570 struct gpio_chip *chip,
571 unsigned offset, unsigned gpio)
572 {
573 struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
574 const char *label = gpiochip_is_requested(chip, offset - 1);
575 u8 gpio_offset = offset - 1;
576 int mode = -1;
577 bool is_out;
578 bool pd;
579 enum abx500_gpio_pull_updown pud = 0;
580 int ret;
581
582 const char *modes[] = {
583 [ABX500_DEFAULT] = "default",
584 [ABX500_ALT_A] = "altA",
585 [ABX500_ALT_B] = "altB",
586 [ABX500_ALT_C] = "altC",
587 };
588
589 const char *pull_up_down[] = {
590 [ABX500_GPIO_PULL_DOWN] = "pull down",
591 [ABX500_GPIO_PULL_NONE] = "pull none",
592 [ABX500_GPIO_PULL_NONE + 1] = "pull none",
593 [ABX500_GPIO_PULL_UP] = "pull up",
594 };
595
596 ret = abx500_gpio_get_bit(chip, AB8500_GPIO_DIR1_REG,
597 gpio_offset, &is_out);
598 if (ret < 0)
599 goto out;
600
601 seq_printf(s, " gpio-%-3d (%-20.20s) %-3s",
602 gpio, label ?: "(none)",
603 is_out ? "out" : "in ");
604
605 if (!is_out) {
606 if (abx500_pullud_supported(chip, offset)) {
607 ret = abx500_get_pull_updown(pct, offset, &pud);
608 if (ret < 0)
609 goto out;
610
611 seq_printf(s, " %-9s", pull_up_down[pud]);
612 } else {
613 ret = abx500_gpio_get_bit(chip, AB8500_GPIO_PUD1_REG,
614 gpio_offset, &pd);
615 if (ret < 0)
616 goto out;
617
618 seq_printf(s, " %-9s", pull_up_down[pd]);
619 }
620 } else
621 seq_printf(s, " %-9s", chip->get(chip, offset) ? "hi" : "lo");
622
623 if (pctldev)
624 mode = abx500_get_mode(pctldev, chip, offset);
625
626 seq_printf(s, " %s", (mode < 0) ? "unknown" : modes[mode]);
627
628 out:
629 if (ret < 0)
630 dev_err(pct->dev, "%s failed (%d)\n", __func__, ret);
631 }
632
633 static void abx500_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
634 {
635 unsigned i;
636 unsigned gpio = chip->base;
637 struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
638 struct pinctrl_dev *pctldev = pct->pctldev;
639
640 for (i = 0; i < chip->ngpio; i++, gpio++) {
641 /* On AB8500, there is no GPIO0, the first is the GPIO 1 */
642 abx500_gpio_dbg_show_one(s, pctldev, chip, i + 1, gpio);
643 seq_printf(s, "\n");
644 }
645 }
646
647 #else
648 static inline void abx500_gpio_dbg_show_one(struct seq_file *s,
649 struct pinctrl_dev *pctldev,
650 struct gpio_chip *chip,
651 unsigned offset, unsigned gpio)
652 {
653 }
654 #define abx500_gpio_dbg_show NULL
655 #endif
656
657 static int abx500_gpio_request(struct gpio_chip *chip, unsigned offset)
658 {
659 int gpio = chip->base + offset;
660
661 return pinctrl_request_gpio(gpio);
662 }
663
664 static void abx500_gpio_free(struct gpio_chip *chip, unsigned offset)
665 {
666 int gpio = chip->base + offset;
667
668 pinctrl_free_gpio(gpio);
669 }
670
671 static struct gpio_chip abx500gpio_chip = {
672 .label = "abx500-gpio",
673 .owner = THIS_MODULE,
674 .request = abx500_gpio_request,
675 .free = abx500_gpio_free,
676 .direction_input = abx500_gpio_direction_input,
677 .get = abx500_gpio_get,
678 .direction_output = abx500_gpio_direction_output,
679 .set = abx500_gpio_set,
680 .to_irq = abx500_gpio_to_irq,
681 .dbg_show = abx500_gpio_dbg_show,
682 };
683
684 static int abx500_pmx_get_funcs_cnt(struct pinctrl_dev *pctldev)
685 {
686 struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
687
688 return pct->soc->nfunctions;
689 }
690
691 static const char *abx500_pmx_get_func_name(struct pinctrl_dev *pctldev,
692 unsigned function)
693 {
694 struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
695
696 return pct->soc->functions[function].name;
697 }
698
699 static int abx500_pmx_get_func_groups(struct pinctrl_dev *pctldev,
700 unsigned function,
701 const char * const **groups,
702 unsigned * const num_groups)
703 {
704 struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
705
706 *groups = pct->soc->functions[function].groups;
707 *num_groups = pct->soc->functions[function].ngroups;
708
709 return 0;
710 }
711
712 static int abx500_pmx_enable(struct pinctrl_dev *pctldev, unsigned function,
713 unsigned group)
714 {
715 struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
716 struct gpio_chip *chip = &pct->chip;
717 const struct abx500_pingroup *g;
718 int i;
719 int ret = 0;
720
721 g = &pct->soc->groups[group];
722 if (g->altsetting < 0)
723 return -EINVAL;
724
725 dev_dbg(pct->dev, "enable group %s, %u pins\n", g->name, g->npins);
726
727 for (i = 0; i < g->npins; i++) {
728 dev_dbg(pct->dev, "setting pin %d to altsetting %d\n",
729 g->pins[i], g->altsetting);
730
731 ret = abx500_set_mode(pctldev, chip, g->pins[i], g->altsetting);
732 }
733
734 if (ret < 0)
735 dev_err(pct->dev, "%s failed (%d)\n", __func__, ret);
736
737 return ret;
738 }
739
740 static void abx500_pmx_disable(struct pinctrl_dev *pctldev,
741 unsigned function, unsigned group)
742 {
743 struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
744 const struct abx500_pingroup *g;
745
746 g = &pct->soc->groups[group];
747 if (g->altsetting < 0)
748 return;
749
750 /* FIXME: poke out the mux, set the pin to some default state? */
751 dev_dbg(pct->dev, "disable group %s, %u pins\n", g->name, g->npins);
752 }
753
754 static int abx500_gpio_request_enable(struct pinctrl_dev *pctldev,
755 struct pinctrl_gpio_range *range,
756 unsigned offset)
757 {
758 struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
759 const struct abx500_pinrange *p;
760 int ret;
761 int i;
762
763 /*
764 * Different ranges have different ways to enable GPIO function on a
765 * pin, so refer back to our local range type, where we handily define
766 * what altfunc enables GPIO for a certain pin.
767 */
768 for (i = 0; i < pct->soc->gpio_num_ranges; i++) {
769 p = &pct->soc->gpio_ranges[i];
770 if ((offset >= p->offset) &&
771 (offset < (p->offset + p->npins)))
772 break;
773 }
774
775 if (i == pct->soc->gpio_num_ranges) {
776 dev_err(pct->dev, "%s failed to locate range\n", __func__);
777 return -ENODEV;
778 }
779
780 dev_dbg(pct->dev, "enable GPIO by altfunc %d at gpio %d\n",
781 p->altfunc, offset);
782
783 ret = abx500_set_mode(pct->pctldev, &pct->chip,
784 offset, p->altfunc);
785 if (ret < 0)
786 dev_err(pct->dev, "%s setting altfunc failed\n", __func__);
787
788 return ret;
789 }
790
791 static void abx500_gpio_disable_free(struct pinctrl_dev *pctldev,
792 struct pinctrl_gpio_range *range,
793 unsigned offset)
794 {
795 }
796
797 static const struct pinmux_ops abx500_pinmux_ops = {
798 .get_functions_count = abx500_pmx_get_funcs_cnt,
799 .get_function_name = abx500_pmx_get_func_name,
800 .get_function_groups = abx500_pmx_get_func_groups,
801 .enable = abx500_pmx_enable,
802 .disable = abx500_pmx_disable,
803 .gpio_request_enable = abx500_gpio_request_enable,
804 .gpio_disable_free = abx500_gpio_disable_free,
805 };
806
807 static int abx500_get_groups_cnt(struct pinctrl_dev *pctldev)
808 {
809 struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
810
811 return pct->soc->ngroups;
812 }
813
814 static const char *abx500_get_group_name(struct pinctrl_dev *pctldev,
815 unsigned selector)
816 {
817 struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
818
819 return pct->soc->groups[selector].name;
820 }
821
822 static int abx500_get_group_pins(struct pinctrl_dev *pctldev,
823 unsigned selector,
824 const unsigned **pins,
825 unsigned *num_pins)
826 {
827 struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
828
829 *pins = pct->soc->groups[selector].pins;
830 *num_pins = pct->soc->groups[selector].npins;
831
832 return 0;
833 }
834
835 static void abx500_pin_dbg_show(struct pinctrl_dev *pctldev,
836 struct seq_file *s, unsigned offset)
837 {
838 struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
839 struct gpio_chip *chip = &pct->chip;
840
841 abx500_gpio_dbg_show_one(s, pctldev, chip, offset,
842 chip->base + offset - 1);
843 }
844
845 static void abx500_dt_free_map(struct pinctrl_dev *pctldev,
846 struct pinctrl_map *map, unsigned num_maps)
847 {
848 int i;
849
850 for (i = 0; i < num_maps; i++)
851 if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN)
852 kfree(map[i].data.configs.configs);
853 kfree(map);
854 }
855
856 static int abx500_dt_reserve_map(struct pinctrl_map **map,
857 unsigned *reserved_maps,
858 unsigned *num_maps,
859 unsigned reserve)
860 {
861 unsigned old_num = *reserved_maps;
862 unsigned new_num = *num_maps + reserve;
863 struct pinctrl_map *new_map;
864
865 if (old_num >= new_num)
866 return 0;
867
868 new_map = krealloc(*map, sizeof(*new_map) * new_num, GFP_KERNEL);
869 if (!new_map)
870 return -ENOMEM;
871
872 memset(new_map + old_num, 0, (new_num - old_num) * sizeof(*new_map));
873
874 *map = new_map;
875 *reserved_maps = new_num;
876
877 return 0;
878 }
879
880 static int abx500_dt_add_map_mux(struct pinctrl_map **map,
881 unsigned *reserved_maps,
882 unsigned *num_maps, const char *group,
883 const char *function)
884 {
885 if (*num_maps == *reserved_maps)
886 return -ENOSPC;
887
888 (*map)[*num_maps].type = PIN_MAP_TYPE_MUX_GROUP;
889 (*map)[*num_maps].data.mux.group = group;
890 (*map)[*num_maps].data.mux.function = function;
891 (*num_maps)++;
892
893 return 0;
894 }
895
896 static int abx500_dt_add_map_configs(struct pinctrl_map **map,
897 unsigned *reserved_maps,
898 unsigned *num_maps, const char *group,
899 unsigned long *configs, unsigned num_configs)
900 {
901 unsigned long *dup_configs;
902
903 if (*num_maps == *reserved_maps)
904 return -ENOSPC;
905
906 dup_configs = kmemdup(configs, num_configs * sizeof(*dup_configs),
907 GFP_KERNEL);
908 if (!dup_configs)
909 return -ENOMEM;
910
911 (*map)[*num_maps].type = PIN_MAP_TYPE_CONFIGS_PIN;
912
913 (*map)[*num_maps].data.configs.group_or_pin = group;
914 (*map)[*num_maps].data.configs.configs = dup_configs;
915 (*map)[*num_maps].data.configs.num_configs = num_configs;
916 (*num_maps)++;
917
918 return 0;
919 }
920
921 static const char *abx500_find_pin_name(struct pinctrl_dev *pctldev,
922 const char *pin_name)
923 {
924 int i, pin_number;
925 struct abx500_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
926
927 if (sscanf((char *)pin_name, "GPIO%d", &pin_number) == 1)
928 for (i = 0; i < npct->soc->npins; i++)
929 if (npct->soc->pins[i].number == pin_number)
930 return npct->soc->pins[i].name;
931 return NULL;
932 }
933
934 static int abx500_dt_subnode_to_map(struct pinctrl_dev *pctldev,
935 struct device_node *np,
936 struct pinctrl_map **map,
937 unsigned *reserved_maps,
938 unsigned *num_maps)
939 {
940 int ret;
941 const char *function = NULL;
942 unsigned long *configs;
943 unsigned int nconfigs = 0;
944 bool has_config = 0;
945 unsigned reserve = 0;
946 struct property *prop;
947 const char *group, *gpio_name;
948 struct device_node *np_config;
949
950 ret = of_property_read_string(np, "ste,function", &function);
951 if (ret >= 0)
952 reserve = 1;
953
954 ret = pinconf_generic_parse_dt_config(np, &configs, &nconfigs);
955 if (nconfigs)
956 has_config = 1;
957
958 np_config = of_parse_phandle(np, "ste,config", 0);
959 if (np_config) {
960 ret = pinconf_generic_parse_dt_config(np_config, &configs,
961 &nconfigs);
962 if (ret)
963 goto exit;
964 has_config |= nconfigs;
965 }
966
967 ret = of_property_count_strings(np, "ste,pins");
968 if (ret < 0)
969 goto exit;
970
971 if (has_config)
972 reserve++;
973
974 reserve *= ret;
975
976 ret = abx500_dt_reserve_map(map, reserved_maps, num_maps, reserve);
977 if (ret < 0)
978 goto exit;
979
980 of_property_for_each_string(np, "ste,pins", prop, group) {
981 if (function) {
982 ret = abx500_dt_add_map_mux(map, reserved_maps,
983 num_maps, group, function);
984 if (ret < 0)
985 goto exit;
986 }
987 if (has_config) {
988 gpio_name = abx500_find_pin_name(pctldev, group);
989
990 ret = abx500_dt_add_map_configs(map, reserved_maps,
991 num_maps, gpio_name, configs, 1);
992 if (ret < 0)
993 goto exit;
994 }
995
996 }
997 exit:
998 return ret;
999 }
1000
1001 static int abx500_dt_node_to_map(struct pinctrl_dev *pctldev,
1002 struct device_node *np_config,
1003 struct pinctrl_map **map, unsigned *num_maps)
1004 {
1005 unsigned reserved_maps;
1006 struct device_node *np;
1007 int ret;
1008
1009 reserved_maps = 0;
1010 *map = NULL;
1011 *num_maps = 0;
1012
1013 for_each_child_of_node(np_config, np) {
1014 ret = abx500_dt_subnode_to_map(pctldev, np, map,
1015 &reserved_maps, num_maps);
1016 if (ret < 0) {
1017 abx500_dt_free_map(pctldev, *map, *num_maps);
1018 return ret;
1019 }
1020 }
1021
1022 return 0;
1023 }
1024
1025 static const struct pinctrl_ops abx500_pinctrl_ops = {
1026 .get_groups_count = abx500_get_groups_cnt,
1027 .get_group_name = abx500_get_group_name,
1028 .get_group_pins = abx500_get_group_pins,
1029 .pin_dbg_show = abx500_pin_dbg_show,
1030 .dt_node_to_map = abx500_dt_node_to_map,
1031 .dt_free_map = abx500_dt_free_map,
1032 };
1033
1034 static int abx500_pin_config_get(struct pinctrl_dev *pctldev,
1035 unsigned pin,
1036 unsigned long *config)
1037 {
1038 return -ENOSYS;
1039 }
1040
1041 static int abx500_pin_config_set(struct pinctrl_dev *pctldev,
1042 unsigned pin,
1043 unsigned long *configs,
1044 unsigned num_configs)
1045 {
1046 struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
1047 struct gpio_chip *chip = &pct->chip;
1048 unsigned offset;
1049 int ret = -EINVAL;
1050 int i;
1051 enum pin_config_param param;
1052 enum pin_config_param argument;
1053
1054 for (i = 0; i < num_configs; i++) {
1055 param = pinconf_to_config_param(configs[i]);
1056 argument = pinconf_to_config_argument(configs[i]);
1057
1058 dev_dbg(chip->dev, "pin %d [%#lx]: %s %s\n",
1059 pin, configs[i],
1060 (param == PIN_CONFIG_OUTPUT) ? "output " : "input",
1061 (param == PIN_CONFIG_OUTPUT) ?
1062 (argument ? "high" : "low") :
1063 (argument ? "pull up" : "pull down"));
1064
1065 /* on ABx500, there is no GPIO0, so adjust the offset */
1066 offset = pin - 1;
1067
1068 switch (param) {
1069 case PIN_CONFIG_BIAS_DISABLE:
1070 ret = abx500_gpio_direction_input(chip, offset);
1071 if (ret < 0)
1072 goto out;
1073 /*
1074 * Some chips only support pull down, while some
1075 * actually support both pull up and pull down. Such
1076 * chips have a "pullud" range specified for the pins
1077 * that support both features. If the pin is not
1078 * within that range, we fall back to the old bit set
1079 * that only support pull down.
1080 */
1081 if (abx500_pullud_supported(chip, pin))
1082 ret = abx500_set_pull_updown(pct,
1083 pin,
1084 ABX500_GPIO_PULL_NONE);
1085 else
1086 /* Chip only supports pull down */
1087 ret = abx500_gpio_set_bits(chip,
1088 AB8500_GPIO_PUD1_REG, offset,
1089 ABX500_GPIO_PULL_NONE);
1090 break;
1091
1092 case PIN_CONFIG_BIAS_PULL_DOWN:
1093 ret = abx500_gpio_direction_input(chip, offset);
1094 if (ret < 0)
1095 goto out;
1096 /*
1097 * if argument = 1 set the pull down
1098 * else clear the pull down
1099 * Some chips only support pull down, while some
1100 * actually support both pull up and pull down. Such
1101 * chips have a "pullud" range specified for the pins
1102 * that support both features. If the pin is not
1103 * within that range, we fall back to the old bit set
1104 * that only support pull down.
1105 */
1106 if (abx500_pullud_supported(chip, pin))
1107 ret = abx500_set_pull_updown(pct,
1108 pin,
1109 argument ? ABX500_GPIO_PULL_DOWN :
1110 ABX500_GPIO_PULL_NONE);
1111 else
1112 /* Chip only supports pull down */
1113 ret = abx500_gpio_set_bits(chip,
1114 AB8500_GPIO_PUD1_REG,
1115 offset,
1116 argument ? ABX500_GPIO_PULL_DOWN :
1117 ABX500_GPIO_PULL_NONE);
1118 break;
1119
1120 case PIN_CONFIG_BIAS_PULL_UP:
1121 ret = abx500_gpio_direction_input(chip, offset);
1122 if (ret < 0)
1123 goto out;
1124 /*
1125 * if argument = 1 set the pull up
1126 * else clear the pull up
1127 */
1128 ret = abx500_gpio_direction_input(chip, offset);
1129 /*
1130 * Some chips only support pull down, while some
1131 * actually support both pull up and pull down. Such
1132 * chips have a "pullud" range specified for the pins
1133 * that support both features. If the pin is not
1134 * within that range, do nothing
1135 */
1136 if (abx500_pullud_supported(chip, pin))
1137 ret = abx500_set_pull_updown(pct,
1138 pin,
1139 argument ? ABX500_GPIO_PULL_UP :
1140 ABX500_GPIO_PULL_NONE);
1141 break;
1142
1143 case PIN_CONFIG_OUTPUT:
1144 ret = abx500_gpio_direction_output(chip, offset,
1145 argument);
1146 break;
1147
1148 default:
1149 dev_err(chip->dev, "illegal configuration requested\n");
1150 }
1151 } /* for each config */
1152 out:
1153 if (ret < 0)
1154 dev_err(pct->dev, "%s failed (%d)\n", __func__, ret);
1155
1156 return ret;
1157 }
1158
1159 static const struct pinconf_ops abx500_pinconf_ops = {
1160 .pin_config_get = abx500_pin_config_get,
1161 .pin_config_set = abx500_pin_config_set,
1162 };
1163
1164 static struct pinctrl_desc abx500_pinctrl_desc = {
1165 .name = "pinctrl-abx500",
1166 .pctlops = &abx500_pinctrl_ops,
1167 .pmxops = &abx500_pinmux_ops,
1168 .confops = &abx500_pinconf_ops,
1169 .owner = THIS_MODULE,
1170 };
1171
1172 static int abx500_get_gpio_num(struct abx500_pinctrl_soc_data *soc)
1173 {
1174 unsigned int lowest = 0;
1175 unsigned int highest = 0;
1176 unsigned int npins = 0;
1177 int i;
1178
1179 /*
1180 * Compute number of GPIOs from the last SoC gpio range descriptors
1181 * These ranges may include "holes" but the GPIO number space shall
1182 * still be homogeneous, so we need to detect and account for any
1183 * such holes so that these are included in the number of GPIO pins.
1184 */
1185 for (i = 0; i < soc->gpio_num_ranges; i++) {
1186 unsigned gstart;
1187 unsigned gend;
1188 const struct abx500_pinrange *p;
1189
1190 p = &soc->gpio_ranges[i];
1191 gstart = p->offset;
1192 gend = p->offset + p->npins - 1;
1193
1194 if (i == 0) {
1195 /* First iteration, set start values */
1196 lowest = gstart;
1197 highest = gend;
1198 } else {
1199 if (gstart < lowest)
1200 lowest = gstart;
1201 if (gend > highest)
1202 highest = gend;
1203 }
1204 }
1205 /* this gives the absolute number of pins */
1206 npins = highest - lowest + 1;
1207 return npins;
1208 }
1209
1210 static const struct of_device_id abx500_gpio_match[] = {
1211 { .compatible = "stericsson,ab8500-gpio", .data = (void *)PINCTRL_AB8500, },
1212 { .compatible = "stericsson,ab8505-gpio", .data = (void *)PINCTRL_AB8505, },
1213 { .compatible = "stericsson,ab8540-gpio", .data = (void *)PINCTRL_AB8540, },
1214 { .compatible = "stericsson,ab9540-gpio", .data = (void *)PINCTRL_AB9540, },
1215 { }
1216 };
1217
1218 static int abx500_gpio_probe(struct platform_device *pdev)
1219 {
1220 struct device_node *np = pdev->dev.of_node;
1221 const struct of_device_id *match;
1222 struct abx500_pinctrl *pct;
1223 unsigned int id = -1;
1224 int ret, err;
1225 int i;
1226
1227 if (!np) {
1228 dev_err(&pdev->dev, "gpio dt node missing\n");
1229 return -ENODEV;
1230 }
1231
1232 pct = devm_kzalloc(&pdev->dev, sizeof(struct abx500_pinctrl),
1233 GFP_KERNEL);
1234 if (pct == NULL) {
1235 dev_err(&pdev->dev,
1236 "failed to allocate memory for pct\n");
1237 return -ENOMEM;
1238 }
1239
1240 pct->dev = &pdev->dev;
1241 pct->parent = dev_get_drvdata(pdev->dev.parent);
1242 pct->chip = abx500gpio_chip;
1243 pct->chip.dev = &pdev->dev;
1244 pct->chip.base = -1; /* Dynamic allocation */
1245
1246 match = of_match_device(abx500_gpio_match, &pdev->dev);
1247 if (!match) {
1248 dev_err(&pdev->dev, "gpio dt not matching\n");
1249 return -ENODEV;
1250 }
1251 id = (unsigned long)match->data;
1252
1253 /* Poke in other ASIC variants here */
1254 switch (id) {
1255 case PINCTRL_AB8500:
1256 abx500_pinctrl_ab8500_init(&pct->soc);
1257 break;
1258 case PINCTRL_AB8540:
1259 abx500_pinctrl_ab8540_init(&pct->soc);
1260 break;
1261 case PINCTRL_AB9540:
1262 abx500_pinctrl_ab9540_init(&pct->soc);
1263 break;
1264 case PINCTRL_AB8505:
1265 abx500_pinctrl_ab8505_init(&pct->soc);
1266 break;
1267 default:
1268 dev_err(&pdev->dev, "Unsupported pinctrl sub driver (%d)\n", id);
1269 return -EINVAL;
1270 }
1271
1272 if (!pct->soc) {
1273 dev_err(&pdev->dev, "Invalid SOC data\n");
1274 return -EINVAL;
1275 }
1276
1277 pct->chip.ngpio = abx500_get_gpio_num(pct->soc);
1278 pct->irq_cluster = pct->soc->gpio_irq_cluster;
1279 pct->irq_cluster_size = pct->soc->ngpio_irq_cluster;
1280
1281 ret = gpiochip_add(&pct->chip);
1282 if (ret) {
1283 dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret);
1284 return ret;
1285 }
1286 dev_info(&pdev->dev, "added gpiochip\n");
1287
1288 abx500_pinctrl_desc.pins = pct->soc->pins;
1289 abx500_pinctrl_desc.npins = pct->soc->npins;
1290 pct->pctldev = pinctrl_register(&abx500_pinctrl_desc, &pdev->dev, pct);
1291 if (!pct->pctldev) {
1292 dev_err(&pdev->dev,
1293 "could not register abx500 pinctrl driver\n");
1294 ret = -EINVAL;
1295 goto out_rem_chip;
1296 }
1297 dev_info(&pdev->dev, "registered pin controller\n");
1298
1299 /* We will handle a range of GPIO pins */
1300 for (i = 0; i < pct->soc->gpio_num_ranges; i++) {
1301 const struct abx500_pinrange *p = &pct->soc->gpio_ranges[i];
1302
1303 ret = gpiochip_add_pin_range(&pct->chip,
1304 dev_name(&pdev->dev),
1305 p->offset - 1, p->offset, p->npins);
1306 if (ret < 0)
1307 goto out_rem_chip;
1308 }
1309
1310 platform_set_drvdata(pdev, pct);
1311 dev_info(&pdev->dev, "initialized abx500 pinctrl driver\n");
1312
1313 return 0;
1314
1315 out_rem_chip:
1316 err = gpiochip_remove(&pct->chip);
1317 if (err)
1318 dev_info(&pdev->dev, "failed to remove gpiochip\n");
1319
1320 return ret;
1321 }
1322
1323 /**
1324 * abx500_gpio_remove() - remove Ab8500-gpio driver
1325 * @pdev: Platform device registered
1326 */
1327 static int abx500_gpio_remove(struct platform_device *pdev)
1328 {
1329 struct abx500_pinctrl *pct = platform_get_drvdata(pdev);
1330 int ret;
1331
1332 ret = gpiochip_remove(&pct->chip);
1333 if (ret < 0) {
1334 dev_err(pct->dev, "unable to remove gpiochip: %d\n",
1335 ret);
1336 return ret;
1337 }
1338
1339 return 0;
1340 }
1341
1342 static struct platform_driver abx500_gpio_driver = {
1343 .driver = {
1344 .name = "abx500-gpio",
1345 .owner = THIS_MODULE,
1346 .of_match_table = abx500_gpio_match,
1347 },
1348 .probe = abx500_gpio_probe,
1349 .remove = abx500_gpio_remove,
1350 };
1351
1352 static int __init abx500_gpio_init(void)
1353 {
1354 return platform_driver_register(&abx500_gpio_driver);
1355 }
1356 core_initcall(abx500_gpio_init);
1357
1358 MODULE_AUTHOR("Patrice Chotard <patrice.chotard@st.com>");
1359 MODULE_DESCRIPTION("Driver allows to use AxB5xx unused pins to be used as GPIO");
1360 MODULE_ALIAS("platform:abx500-gpio");
1361 MODULE_LICENSE("GPL v2");
Linux kernel - Deliverables
This page took 0.11098 seconds and 5 git commands to generate.